From abf35df21513c51d7761c41fa6d3b819cdf4103e Mon Sep 17 00:00:00 2001 From: Jason Gunthorpe Date: Tue, 9 Mar 2010 09:17:42 +0000 Subject: NET: Support clause 45 MDIO commands at the MDIO bus level IEEE 802.3ae clause 45 specifies a somewhat modified MDIO protocol for use by 10GIGE phys. The main change is a 21 bit address split into a 5 bit device ID and a 16 bit register offset. The definition is designed so that normal and extended devices can run on the same MDIO bus. Extend mdio-bitbang to do the new protocol. At the MDIO bus level the protocol is requested by or'ing MII_ADDR_C45 into the register offset. Make phy_read/phy_write/etc pass a full 32 bit register offset. This does not attempt to make the phy layer support C45 style PHYs, just to provide the MDIO bus support. Tested against a Broadcom 10GE phy with ID 0x206034, and several Broadcom 10/100/1000 Phys in normal mode. Signed-off-by: Jason Gunthorpe Signed-off-by: David S. Miller --- drivers/net/phy/mdio_bus.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers/net/phy/mdio_bus.c') diff --git a/drivers/net/phy/mdio_bus.c b/drivers/net/phy/mdio_bus.c index e17b70291bb..6a6b8199a0d 100644 --- a/drivers/net/phy/mdio_bus.c +++ b/drivers/net/phy/mdio_bus.c @@ -208,7 +208,7 @@ EXPORT_SYMBOL(mdiobus_scan); * because the bus read/write functions may wait for an interrupt * to conclude the operation. */ -int mdiobus_read(struct mii_bus *bus, int addr, u16 regnum) +int mdiobus_read(struct mii_bus *bus, int addr, u32 regnum) { int retval; @@ -233,7 +233,7 @@ EXPORT_SYMBOL(mdiobus_read); * because the bus read/write functions may wait for an interrupt * to conclude the operation. */ -int mdiobus_write(struct mii_bus *bus, int addr, u16 regnum, u16 val) +int mdiobus_write(struct mii_bus *bus, int addr, u32 regnum, u16 val) { int err; -- cgit v1.2.3-70-g09d2