From 372cc5972de0eb5b15403d37fa63dcb4f9134ee0 Mon Sep 17 00:00:00 2001 From: Sivakumar Subramani Date: Wed, 31 Jan 2007 13:32:57 -0500 Subject: s2io: Fixes in updating skb->truesize and code cleanup. 1. Fix for updating skb->truesize properly. 2. Disable NAPI only if more than one ring configured in case of MSI/MSI-X interrupts. Previously we were disabling NAPI irrespective of number of rings when MSI/MSI-X interrupts were used. 3. Code cleanup. Signed-off-by: Sivakumar Subramani Signed-off-by: Jeff Garzik --- drivers/net/s2io.c | 15 ++++++++++----- 1 file changed, 10 insertions(+), 5 deletions(-) (limited to 'drivers/net/s2io.c') diff --git a/drivers/net/s2io.c b/drivers/net/s2io.c index 350723bd5eb..9b9b28e85a7 100644 --- a/drivers/net/s2io.c +++ b/drivers/net/s2io.c @@ -459,7 +459,7 @@ static int init_shared_mem(struct s2io_nic *nic) void *tmp_v_addr, *tmp_v_addr_next; dma_addr_t tmp_p_addr, tmp_p_addr_next; RxD_block_t *pre_rxd_blk = NULL; - int i, j, blk_cnt, rx_sz, tx_sz; + int i, j, blk_cnt; int lst_size, lst_per_page; struct net_device *dev = nic->dev; unsigned long tmp; @@ -484,7 +484,6 @@ static int init_shared_mem(struct s2io_nic *nic) } lst_size = (sizeof(TxD_t) * config->max_txds); - tx_sz = lst_size * size; lst_per_page = PAGE_SIZE / lst_size; for (i = 0; i < config->tx_fifo_num; i++) { @@ -583,7 +582,6 @@ static int init_shared_mem(struct s2io_nic *nic) size = (size * (sizeof(RxD1_t))); else size = (size * (sizeof(RxD3_t))); - rx_sz = size; for (i = 0; i < config->rx_ring_num; i++) { mac_control->rings[i].rx_curr_get_info.block_index = 0; @@ -624,6 +622,8 @@ static int init_shared_mem(struct s2io_nic *nic) rx_blocks->rxds = kmalloc(sizeof(rxd_info_t)* rxd_count[nic->rxd_mode], GFP_KERNEL); + if (!rx_blocks->rxds) + return -ENOMEM; for (l=0; lrxd_mode];l++) { rx_blocks->rxds[l].virt_addr = rx_blocks->block_virt_addr + @@ -2259,6 +2259,7 @@ static int fill_rxd_3buf(nic_t *nic, RxD_t *rxdp, struct sk_buff *skb) return -ENOMEM ; } frag_list = skb_shinfo(skb)->frag_list; + skb->truesize += frag_list->truesize; frag_list->next = NULL; tmp = (void *)ALIGN((long)frag_list->data, ALIGN_SIZE + 1); frag_list->data = tmp; @@ -3185,6 +3186,8 @@ static void alarm_intr_handler(struct s2io_nic *nic) register u64 val64 = 0, err_reg = 0; u64 cnt; int i; + if (atomic_read(&nic->card_state) == CARD_DOWN) + return; nic->mac_control.stats_info->sw_stat.ring_full_cnt = 0; /* Handling the XPAK counters update */ if(nic->mac_control.stats_info->xpak_stat.xpak_timer_count < 72000) { @@ -6576,7 +6579,6 @@ static int rx_osm_handler(ring_info_t *ring_data, RxD_t * rxdp) skb_put(skb, buf1_len); skb->len += buf2_len; skb->data_len += buf2_len; - skb->truesize += buf2_len; skb_put(skb_shinfo(skb)->frag_list, buf2_len); sp->stats.rx_bytes += buf1_len; @@ -6797,6 +6799,8 @@ static int s2io_verify_parm(struct pci_dev *pdev, u8 *dev_intr_type) "Defaulting to INTA\n"); *dev_intr_type = INTA; } + if ( (rx_ring_num > 1) && (*dev_intr_type != INTA) ) + napi = 0; if (rx_ring_mode > 3) { DBG_PRINT(ERR_DBG, "s2io: Requested ring mode not supported\n"); DBG_PRINT(ERR_DBG, "s2io: Defaulting to 3-buffer mode\n"); @@ -7312,7 +7316,7 @@ int __init s2io_starter(void) * Description: This function is the cleanup routine for the driver. It unregist * ers the driver. */ -static void s2io_closer(void) +static __exit void s2io_closer(void) { pci_unregister_driver(&s2io_driver); DBG_PRINT(INIT_DBG, "cleanup done\n"); @@ -7633,6 +7637,7 @@ static void lro_append_pkt(nic_t *sp, lro_t *lro, struct sk_buff *skb, lro->last_frag->next = skb; else skb_shinfo(first)->frag_list = skb; + first->truesize += skb->truesize; lro->last_frag = skb; sp->mac_control.stats_info->sw_stat.clubbed_frms_cnt++; return; -- cgit v1.2.3-70-g09d2