From 1da177e4c3f41524e886b7f1b8a0c1fc7321cac2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Sat, 16 Apr 2005 15:20:36 -0700 Subject: Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip! --- drivers/net/s2io.h | 760 +++++++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 760 insertions(+) create mode 100644 drivers/net/s2io.h (limited to 'drivers/net/s2io.h') diff --git a/drivers/net/s2io.h b/drivers/net/s2io.h new file mode 100644 index 00000000000..1711c8c3dc9 --- /dev/null +++ b/drivers/net/s2io.h @@ -0,0 +1,760 @@ +/************************************************************************ + * s2io.h: A Linux PCI-X Ethernet driver for S2IO 10GbE Server NIC + * Copyright(c) 2002-2005 Neterion Inc. + + * This software may be used and distributed according to the terms of + * the GNU General Public License (GPL), incorporated herein by reference. + * Drivers based on or derived from this code fall under the GPL and must + * retain the authorship, copyright and license notice. This file is not + * a complete program and may only be used when the entire operating + * system is licensed under the GPL. + * See the file COPYING in this distribution for more information. + ************************************************************************/ +#ifndef _S2IO_H +#define _S2IO_H + +#define TBD 0 +#define BIT(loc) (0x8000000000000000ULL >> (loc)) +#define vBIT(val, loc, sz) (((u64)val) << (64-loc-sz)) +#define INV(d) ((d&0xff)<<24) | (((d>>8)&0xff)<<16) | (((d>>16)&0xff)<<8)| ((d>>24)&0xff) + +#ifndef BOOL +#define BOOL int +#endif + +#ifndef TRUE +#define TRUE 1 +#define FALSE 0 +#endif + +#undef SUCCESS +#define SUCCESS 0 +#define FAILURE -1 + +/* Maximum outstanding splits to be configured into xena. */ +typedef enum xena_max_outstanding_splits { + XENA_ONE_SPLIT_TRANSACTION = 0, + XENA_TWO_SPLIT_TRANSACTION = 1, + XENA_THREE_SPLIT_TRANSACTION = 2, + XENA_FOUR_SPLIT_TRANSACTION = 3, + XENA_EIGHT_SPLIT_TRANSACTION = 4, + XENA_TWELVE_SPLIT_TRANSACTION = 5, + XENA_SIXTEEN_SPLIT_TRANSACTION = 6, + XENA_THIRTYTWO_SPLIT_TRANSACTION = 7 +} xena_max_outstanding_splits; +#define XENA_MAX_OUTSTANDING_SPLITS(n) (n << 4) + +/* OS concerned variables and constants */ +#define WATCH_DOG_TIMEOUT 5*HZ +#define EFILL 0x1234 +#define ALIGN_SIZE 127 +#define PCIX_COMMAND_REGISTER 0x62 + +/* + * Debug related variables. + */ +/* different debug levels. */ +#define ERR_DBG 0 +#define INIT_DBG 1 +#define INFO_DBG 2 +#define TX_DBG 3 +#define INTR_DBG 4 + +/* Global variable that defines the present debug level of the driver. */ +static int debug_level = ERR_DBG; /* Default level. */ + +/* DEBUG message print. */ +#define DBG_PRINT(dbg_level, args...) if(!(debug_level> 16) & 0xFFFF) +#define RXD_GET_L4_CKSUM(val) ((u16)(val) & 0xFFFF) + + u64 Control_2; +#ifndef CONFIG_2BUFF_MODE +#define MASK_BUFFER0_SIZE vBIT(0xFFFF,0,16) +#define SET_BUFFER0_SIZE(val) vBIT(val,0,16) +#else +#define MASK_BUFFER0_SIZE vBIT(0xFF,0,16) +#define MASK_BUFFER1_SIZE vBIT(0xFFFF,16,16) +#define MASK_BUFFER2_SIZE vBIT(0xFFFF,32,16) +#define SET_BUFFER0_SIZE(val) vBIT(val,8,8) +#define SET_BUFFER1_SIZE(val) vBIT(val,16,16) +#define SET_BUFFER2_SIZE(val) vBIT(val,32,16) +#endif + +#define MASK_VLAN_TAG vBIT(0xFFFF,48,16) +#define SET_VLAN_TAG(val) vBIT(val,48,16) +#define SET_NUM_TAG(val) vBIT(val,16,32) + +#ifndef CONFIG_2BUFF_MODE +#define RXD_GET_BUFFER0_SIZE(Control_2) (u64)((Control_2 & vBIT(0xFFFF,0,16))) +#else +#define RXD_GET_BUFFER0_SIZE(Control_2) (u8)((Control_2 & MASK_BUFFER0_SIZE) \ + >> 48) +#define RXD_GET_BUFFER1_SIZE(Control_2) (u16)((Control_2 & MASK_BUFFER1_SIZE) \ + >> 32) +#define RXD_GET_BUFFER2_SIZE(Control_2) (u16)((Control_2 & MASK_BUFFER2_SIZE) \ + >> 16) +#define BUF0_LEN 40 +#define BUF1_LEN 1 +#endif + + u64 Buffer0_ptr; +#ifdef CONFIG_2BUFF_MODE + u64 Buffer1_ptr; + u64 Buffer2_ptr; +#endif +} RxD_t; + +/* Structure that represents the Rx descriptor block which contains + * 128 Rx descriptors. + */ +#ifndef CONFIG_2BUFF_MODE +typedef struct _RxD_block { +#define MAX_RXDS_PER_BLOCK 127 + RxD_t rxd[MAX_RXDS_PER_BLOCK]; + + u64 reserved_0; +#define END_OF_BLOCK 0xFEFFFFFFFFFFFFFFULL + u64 reserved_1; /* 0xFEFFFFFFFFFFFFFF to mark last + * Rxd in this blk */ + u64 reserved_2_pNext_RxD_block; /* Logical ptr to next */ + u64 pNext_RxD_Blk_physical; /* Buff0_ptr.In a 32 bit arch + * the upper 32 bits should + * be 0 */ +} RxD_block_t; +#else +typedef struct _RxD_block { +#define MAX_RXDS_PER_BLOCK 85 + RxD_t rxd[MAX_RXDS_PER_BLOCK]; + +#define END_OF_BLOCK 0xFEFFFFFFFFFFFFFFULL + u64 reserved_1; /* 0xFEFFFFFFFFFFFFFF to mark last Rxd + * in this blk */ + u64 pNext_RxD_Blk_physical; /* Phy ponter to next blk. */ +} RxD_block_t; +#define SIZE_OF_BLOCK 4096 + +/* Structure to hold virtual addresses of Buf0 and Buf1 in + * 2buf mode. */ +typedef struct bufAdd { + void *ba_0_org; + void *ba_1_org; + void *ba_0; + void *ba_1; +} buffAdd_t; +#endif + +/* Structure which stores all the MAC control parameters */ + +/* This structure stores the offset of the RxD in the ring + * from which the Rx Interrupt processor can start picking + * up the RxDs for processing. + */ +typedef struct _rx_curr_get_info_t { + u32 block_index; + u32 offset; + u32 ring_len; +} rx_curr_get_info_t; + +typedef rx_curr_get_info_t rx_curr_put_info_t; + +/* This structure stores the offset of the TxDl in the FIFO + * from which the Tx Interrupt processor can start picking + * up the TxDLs for send complete interrupt processing. + */ +typedef struct { + u32 offset; + u32 fifo_len; +} tx_curr_get_info_t; + +typedef tx_curr_get_info_t tx_curr_put_info_t; + +/* Infomation related to the Tx and Rx FIFOs and Rings of Xena + * is maintained in this structure. + */ +typedef struct mac_info { +/* rx side stuff */ + /* Put pointer info which indictes which RxD has to be replenished + * with a new buffer. + */ + rx_curr_put_info_t rx_curr_put_info[MAX_RX_RINGS]; + + /* Get pointer info which indictes which is the last RxD that was + * processed by the driver. + */ + rx_curr_get_info_t rx_curr_get_info[MAX_RX_RINGS]; + + u16 rmac_pause_time; + u16 mc_pause_threshold_q0q3; + u16 mc_pause_threshold_q4q7; + +/* tx side stuff */ + /* logical pointer of start of each Tx FIFO */ + TxFIFO_element_t __iomem *tx_FIFO_start[MAX_TX_FIFOS]; + +/* Current offset within tx_FIFO_start, where driver would write new Tx frame*/ + tx_curr_put_info_t tx_curr_put_info[MAX_TX_FIFOS]; + tx_curr_get_info_t tx_curr_get_info[MAX_TX_FIFOS]; + + void *stats_mem; /* orignal pointer to allocated mem */ + dma_addr_t stats_mem_phy; /* Physical address of the stat block */ + u32 stats_mem_sz; + StatInfo_t *stats_info; /* Logical address of the stat block */ +} mac_info_t; + +/* structure representing the user defined MAC addresses */ +typedef struct { + char addr[ETH_ALEN]; + int usage_cnt; +} usr_addr_t; + +/* Structure that holds the Phy and virt addresses of the Blocks */ +typedef struct rx_block_info { + RxD_t *block_virt_addr; + dma_addr_t block_dma_addr; +} rx_block_info_t; + +/* Default Tunable parameters of the NIC. */ +#define DEFAULT_FIFO_LEN 4096 +#define SMALL_RXD_CNT 30 * (MAX_RXDS_PER_BLOCK+1) +#define LARGE_RXD_CNT 100 * (MAX_RXDS_PER_BLOCK+1) +#define SMALL_BLK_CNT 30 +#define LARGE_BLK_CNT 100 + +/* Structure representing one instance of the NIC */ +typedef struct s2io_nic { +#define MAX_MAC_SUPPORTED 16 +#define MAX_SUPPORTED_MULTICASTS MAX_MAC_SUPPORTED + + macaddr_t def_mac_addr[MAX_MAC_SUPPORTED]; + macaddr_t pre_mac_addr[MAX_MAC_SUPPORTED]; + + struct net_device_stats stats; + void __iomem *bar0; + void __iomem *bar1; + struct config_param config; + mac_info_t mac_control; + int high_dma_flag; + int device_close_flag; + int device_enabled_once; + + char name[32]; + struct tasklet_struct task; + volatile unsigned long tasklet_status; + struct timer_list timer; + struct net_device *dev; + struct pci_dev *pdev; + + u16 vendor_id; + u16 device_id; + u16 ccmd; + u32 cbar0_1; + u32 cbar0_2; + u32 cbar1_1; + u32 cbar1_2; + u32 cirq; + u8 cache_line; + u32 rom_expansion; + u16 pcix_cmd; + u32 irq; + atomic_t rx_bufs_left[MAX_RX_RINGS]; + + spinlock_t tx_lock; +#ifndef CONFIG_S2IO_NAPI + spinlock_t put_lock; +#endif + +#define PROMISC 1 +#define ALL_MULTI 2 + +#define MAX_ADDRS_SUPPORTED 64 + u16 usr_addr_count; + u16 mc_addr_count; + usr_addr_t usr_addrs[MAX_ADDRS_SUPPORTED]; + + u16 m_cast_flg; + u16 all_multi_pos; + u16 promisc_flg; + + u16 tx_pkt_count; + u16 rx_pkt_count; + u16 tx_err_count; + u16 rx_err_count; + +#ifndef CONFIG_S2IO_NAPI + /* Index to the absolute position of the put pointer of Rx ring. */ + int put_pos[MAX_RX_RINGS]; +#endif + + /* + * Place holders for the virtual and physical addresses of + * all the Rx Blocks + */ + rx_block_info_t rx_blocks[MAX_RX_RINGS][MAX_RX_BLOCKS_PER_RING]; + int block_count[MAX_RX_RINGS]; + int pkt_cnt[MAX_RX_RINGS]; + + /* Place holder of all the TX List's Phy and Virt addresses. */ + list_info_hold_t *list_info[MAX_TX_FIFOS]; + + /* Id timer, used to blink NIC to physically identify NIC. */ + struct timer_list id_timer; + + /* Restart timer, used to restart NIC if the device is stuck and + * a schedule task that will set the correct Link state once the + * NIC's PHY has stabilized after a state change. + */ +#ifdef INIT_TQUEUE + struct tq_struct rst_timer_task; + struct tq_struct set_link_task; +#else + struct work_struct rst_timer_task; + struct work_struct set_link_task; +#endif + + /* Flag that can be used to turn on or turn off the Rx checksum + * offload feature. + */ + int rx_csum; + + /* after blink, the adapter must be restored with original + * values. + */ + u64 adapt_ctrl_org; + + /* Last known link state. */ + u16 last_link_state; +#define LINK_DOWN 1 +#define LINK_UP 2 + +#ifdef CONFIG_2BUFF_MODE + /* Buffer Address store. */ + buffAdd_t **ba[MAX_RX_RINGS]; +#endif + int task_flag; +#define CARD_DOWN 1 +#define CARD_UP 2 + atomic_t card_state; + volatile unsigned long link_state; +} nic_t; + +#define RESET_ERROR 1; +#define CMD_ERROR 2; + +/* OS related system calls */ +#ifndef readq +static inline u64 readq(void __iomem *addr) +{ + u64 ret = readl(addr + 4); + ret <<= 32; + ret |= readl(addr); + + return ret; +} +#endif + +#ifndef writeq +static inline void writeq(u64 val, void __iomem *addr) +{ + writel((u32) (val), addr); + writel((u32) (val >> 32), (addr + 4)); +} + +/* In 32 bit modes, some registers have to be written in a + * particular order to expect correct hardware operation. The + * macro SPECIAL_REG_WRITE is used to perform such ordered + * writes. Defines UF (Upper First) and LF (Lower First) will + * be used to specify the required write order. + */ +#define UF 1 +#define LF 2 +static inline void SPECIAL_REG_WRITE(u64 val, void __iomem *addr, int order) +{ + if (order == LF) { + writel((u32) (val), addr); + writel((u32) (val >> 32), (addr + 4)); + } else { + writel((u32) (val >> 32), (addr + 4)); + writel((u32) (val), addr); + } +} +#else +#define SPECIAL_REG_WRITE(val, addr, dummy) writeq(val, addr) +#endif + +/* Interrupt related values of Xena */ + +#define ENABLE_INTRS 1 +#define DISABLE_INTRS 2 + +/* Highest level interrupt blocks */ +#define TX_PIC_INTR (0x0001<<0) +#define TX_DMA_INTR (0x0001<<1) +#define TX_MAC_INTR (0x0001<<2) +#define TX_XGXS_INTR (0x0001<<3) +#define TX_TRAFFIC_INTR (0x0001<<4) +#define RX_PIC_INTR (0x0001<<5) +#define RX_DMA_INTR (0x0001<<6) +#define RX_MAC_INTR (0x0001<<7) +#define RX_XGXS_INTR (0x0001<<8) +#define RX_TRAFFIC_INTR (0x0001<<9) +#define MC_INTR (0x0001<<10) +#define ENA_ALL_INTRS ( TX_PIC_INTR | \ + TX_DMA_INTR | \ + TX_MAC_INTR | \ + TX_XGXS_INTR | \ + TX_TRAFFIC_INTR | \ + RX_PIC_INTR | \ + RX_DMA_INTR | \ + RX_MAC_INTR | \ + RX_XGXS_INTR | \ + RX_TRAFFIC_INTR | \ + MC_INTR ) + +/* Interrupt masks for the general interrupt mask register */ +#define DISABLE_ALL_INTRS 0xFFFFFFFFFFFFFFFFULL + +#define TXPIC_INT_M BIT(0) +#define TXDMA_INT_M BIT(1) +#define TXMAC_INT_M BIT(2) +#define TXXGXS_INT_M BIT(3) +#define TXTRAFFIC_INT_M BIT(8) +#define PIC_RX_INT_M BIT(32) +#define RXDMA_INT_M BIT(33) +#define RXMAC_INT_M BIT(34) +#define MC_INT_M BIT(35) +#define RXXGXS_INT_M BIT(36) +#define RXTRAFFIC_INT_M BIT(40) + +/* PIC level Interrupts TODO*/ + +/* DMA level Inressupts */ +#define TXDMA_PFC_INT_M BIT(0) +#define TXDMA_PCC_INT_M BIT(2) + +/* PFC block interrupts */ +#define PFC_MISC_ERR_1 BIT(0) /* Interrupt to indicate FIFO full */ + +/* PCC block interrupts. */ +#define PCC_FB_ECC_ERR vBIT(0xff, 16, 8) /* Interrupt to indicate + PCC_FB_ECC Error. */ + +/* + * Prototype declaration. + */ +static int __devinit s2io_init_nic(struct pci_dev *pdev, + const struct pci_device_id *pre); +static void __devexit s2io_rem_nic(struct pci_dev *pdev); +static int init_shared_mem(struct s2io_nic *sp); +static void free_shared_mem(struct s2io_nic *sp); +static int init_nic(struct s2io_nic *nic); +#ifndef CONFIG_S2IO_NAPI +static void rx_intr_handler(struct s2io_nic *sp); +#endif +static void tx_intr_handler(struct s2io_nic *sp); +static void alarm_intr_handler(struct s2io_nic *sp); + +static int s2io_starter(void); +static void s2io_closer(void); +static void s2io_tx_watchdog(struct net_device *dev); +static void s2io_tasklet(unsigned long dev_addr); +static void s2io_set_multicast(struct net_device *dev); +#ifndef CONFIG_2BUFF_MODE +static int rx_osm_handler(nic_t * sp, u16 len, RxD_t * rxdp, int ring_no); +#else +static int rx_osm_handler(nic_t * sp, RxD_t * rxdp, int ring_no, + buffAdd_t * ba); +#endif +static void s2io_link(nic_t * sp, int link); +static void s2io_reset(nic_t * sp); +#ifdef CONFIG_S2IO_NAPI +static int s2io_poll(struct net_device *dev, int *budget); +#endif +static void s2io_init_pci(nic_t * sp); +static int s2io_set_mac_addr(struct net_device *dev, u8 * addr); +static irqreturn_t s2io_isr(int irq, void *dev_id, struct pt_regs *regs); +static int verify_xena_quiescence(u64 val64, int flag); +static struct ethtool_ops netdev_ethtool_ops; +static void s2io_set_link(unsigned long data); +static int s2io_set_swapper(nic_t * sp); +static void s2io_card_down(nic_t * nic); +static int s2io_card_up(nic_t * nic); + +#endif /* _S2IO_H */ -- cgit v1.2.3-70-g09d2