From 008298231abbeb91bc7be9e8b078607b816d1a4a Mon Sep 17 00:00:00 2001 From: Stephen Hemminger Date: Thu, 20 Nov 2008 20:14:53 -0800 Subject: netdev: add more functions to netdevice ops This patch moves neigh_setup and hard_start_xmit into the network device ops structure. For bisection, fix all the previously converted drivers as well. Bonding driver took the biggest hit on this. Added a prefetch of the hard_start_xmit in the fast path to try and reduce any impact this would have. Signed-off-by: Stephen Hemminger Signed-off-by: David S. Miller --- drivers/net/tg3.c | 45 +++++++++++++++++++++++++++++++-------------- 1 file changed, 31 insertions(+), 14 deletions(-) (limited to 'drivers/net/tg3.c') diff --git a/drivers/net/tg3.c b/drivers/net/tg3.c index 4b97cb60136..9ba18e1bc34 100644 --- a/drivers/net/tg3.c +++ b/drivers/net/tg3.c @@ -12614,19 +12614,6 @@ static int __devinit tg3_get_invariants(struct tg3 *tp) else tp->tg3_flags &= ~TG3_FLAG_POLL_SERDES; - /* All chips before 5787 can get confused if TX buffers - * straddle the 4GB address boundary in some cases. - */ - if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5755 || - GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5787 || - GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5784 || - GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5761 || - GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5785 || - GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5906) - tp->dev->hard_start_xmit = tg3_start_xmit; - else - tp->dev->hard_start_xmit = tg3_start_xmit_dma_bug; - tp->rx_offset = 2; if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5701 && (tp->tg3_flags & TG3_FLAG_PCIX_MODE) != 0) @@ -13346,6 +13333,26 @@ static void __devinit tg3_init_coal(struct tg3 *tp) static const struct net_device_ops tg3_netdev_ops = { .ndo_open = tg3_open, .ndo_stop = tg3_close, + .ndo_start_xmit = tg3_start_xmit, + .ndo_get_stats = tg3_get_stats, + .ndo_validate_addr = eth_validate_addr, + .ndo_set_multicast_list = tg3_set_rx_mode, + .ndo_set_mac_address = tg3_set_mac_addr, + .ndo_do_ioctl = tg3_ioctl, + .ndo_tx_timeout = tg3_tx_timeout, + .ndo_change_mtu = tg3_change_mtu, +#if TG3_VLAN_TAG_USED + .ndo_vlan_rx_register = tg3_vlan_rx_register, +#endif +#ifdef CONFIG_NET_POLL_CONTROLLER + .ndo_poll_controller = tg3_poll_controller, +#endif +}; + +static const struct net_device_ops tg3_netdev_ops_dma_bug = { + .ndo_open = tg3_open, + .ndo_stop = tg3_close, + .ndo_start_xmit = tg3_start_xmit_dma_bug, .ndo_get_stats = tg3_get_stats, .ndo_validate_addr = eth_validate_addr, .ndo_set_multicast_list = tg3_set_rx_mode, @@ -13475,7 +13482,6 @@ static int __devinit tg3_init_one(struct pci_dev *pdev, tp->rx_jumbo_pending = TG3_DEF_RX_JUMBO_RING_PENDING; tp->tx_pending = TG3_DEF_TX_RING_PENDING; - dev->netdev_ops = &tg3_netdev_ops; netif_napi_add(dev, &tp->napi, tg3_poll, 64); dev->ethtool_ops = &tg3_ethtool_ops; dev->watchdog_timeo = TG3_TX_TIMEOUT; @@ -13488,6 +13494,17 @@ static int __devinit tg3_init_one(struct pci_dev *pdev, goto err_out_iounmap; } + if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5755 || + GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5787 || + GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5784 || + GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5761 || + GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5785 || + GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5906) + dev->netdev_ops = &tg3_netdev_ops; + else + dev->netdev_ops = &tg3_netdev_ops_dma_bug; + + /* The EPB bridge inside 5714, 5715, and 5780 and any * device behind the EPB cannot support DMA addresses > 40-bit. * On 64-bit systems with IOMMU, use 40-bit dma_mask. -- cgit v1.2.3-70-g09d2