From 8ef66bdc4bda6aac2dae73b84d79dc8c2db33637 Mon Sep 17 00:00:00 2001 From: Jussi Kivilinna Date: Tue, 10 Jan 2012 06:40:17 +0000 Subject: asix: fix setting custom MAC address on Asix 88772 devices In kernel v3.2 initialization sequence for Asix 88772 devices was changed so that hardware is reseted on every time interface is brought up (ifconfig up), instead just at USB probe time. This causes problem with setting custom MAC address to device as ax88772_reset causes reload of MAC address from EEPROM. This patch fixes the issue by rewriting MAC address at end of ax88772_reset. Signed-off-by: Jussi Kivilinna Acked-by: Grant Grundler Cc: Allan Chou Cc: stable Signed-off-by: David S. Miller --- drivers/net/usb/asix.c | 8 ++++++++ 1 file changed, 8 insertions(+) (limited to 'drivers/net/usb') diff --git a/drivers/net/usb/asix.c b/drivers/net/usb/asix.c index d0937c4634c..8414bdc2123 100644 --- a/drivers/net/usb/asix.c +++ b/drivers/net/usb/asix.c @@ -978,6 +978,7 @@ static int ax88772_link_reset(struct usbnet *dev) static int ax88772_reset(struct usbnet *dev) { + struct asix_data *data = (struct asix_data *)&dev->data; int ret, embd_phy; u16 rx_ctl; @@ -1055,6 +1056,13 @@ static int ax88772_reset(struct usbnet *dev) goto out; } + /* Rewrite MAC address */ + memcpy(data->mac_addr, dev->net->dev_addr, ETH_ALEN); + ret = asix_write_cmd(dev, AX_CMD_WRITE_NODE_ID, 0, 0, ETH_ALEN, + data->mac_addr); + if (ret < 0) + goto out; + /* Set RX_CTL to default values with 2k buffer, and enable cactus */ ret = asix_write_rx_ctl(dev, AX_DEFAULT_RX_CTL); if (ret < 0) -- cgit v1.2.3-70-g09d2