From c77ca950abb587bcebad6dcd0b0b41d7c0255ce9 Mon Sep 17 00:00:00 2001 From: Inaky Perez-Gonzalez Date: Mon, 31 Aug 2009 17:57:56 -0700 Subject: wimax/i2400m: during probe, call sdio_disable at most once In the Intel Wireless Multicomm 3200, the initialization is orchestrated by a component called Top. This component also monitors how many times a function is reset (via sdio_disable) to detect possible issues and will reset the whole multifunction device if any function triggers a maximum reset level. During WiMAX's probe, the driver needs to wait for Top to come up before it can enable the WiMAX function. If it cannot, it will return -ENODEV and the Top driver will rescan the SDIO bus once done loading. Currently, the WiMAX SDIO probe routine was trying a few times before returning -ENODEV, and this was triggering Top's too-many-resets detector. This is, in any case, unnecessary because the Top driver will force the bus rescan when the functions can be probed successfully. Added then a maxtries argument to i2400ms_enable_func() and set it to 1 when calling from probe. We want to reuse this function instead of flat calling out sdio_enable_func() to take advantage of hardware quirk workarounds. Reported-by: Cindy H Kao Signed-off-by: Inaky Perez-Gonzalez --- drivers/net/wimax/i2400m/sdio.c | 16 +++++++++++++--- 1 file changed, 13 insertions(+), 3 deletions(-) (limited to 'drivers/net/wimax/i2400m/sdio.c') diff --git a/drivers/net/wimax/i2400m/sdio.c b/drivers/net/wimax/i2400m/sdio.c index 9d6046f58ca..7c1b843b63e 100644 --- a/drivers/net/wimax/i2400m/sdio.c +++ b/drivers/net/wimax/i2400m/sdio.c @@ -95,17 +95,23 @@ static const struct i2400m_poke_table i2400ms_pokes[] = { * when we ask it to explicitly doing). Tries until a timeout is * reached. * + * The @maxtries argument indicates how many times (at most) it should + * be tried to enable the function. 0 means forever. This acts along + * with the timeout (ie: it'll stop trying as soon as the maximum + * number of tries is reached _or_ as soon as the timeout is reached). + * * The reverse of this is...sdio_disable_function() * * Returns: 0 if the SDIO function was enabled, < 0 errno code on * error (-ENODEV when it was unable to enable the function). */ static -int i2400ms_enable_function(struct sdio_func *func) +int i2400ms_enable_function(struct sdio_func *func, unsigned maxtries) { u64 timeout; int err; struct device *dev = &func->dev; + unsigned tries = 0; d_fnstart(3, dev, "(func %p)\n", func); /* Setup timeout (FIXME: This needs to read the CIS table to @@ -131,6 +137,10 @@ int i2400ms_enable_function(struct sdio_func *func) } d_printf(2, dev, "SDIO function failed to enable: %d\n", err); sdio_release_host(func); + if (maxtries > 0 && ++tries >= maxtries) { + err = -ETIME; + break; + } msleep(I2400MS_INIT_SLEEP_INTERVAL); } /* If timed out, device is not there yet -- get -ENODEV so @@ -305,7 +315,7 @@ do_bus_reset: /* Wait for the device to settle */ msleep(40); - result = i2400ms_enable_function(i2400ms->func); + result = i2400ms_enable_function(i2400ms->func, 0); if (result >= 0) i2400ms_rx_setup(i2400ms); } else @@ -452,7 +462,7 @@ int i2400ms_probe(struct sdio_func *func, goto error_set_blk_size; } - result = i2400ms_enable_function(i2400ms->func); + result = i2400ms_enable_function(i2400ms->func, 1); if (result < 0) { dev_err(dev, "Cannot enable SDIO function: %d\n", result); goto error_func_enable; -- cgit v1.2.3-70-g09d2