From 8c65699274a695df941407ccb91c633819039193 Mon Sep 17 00:00:00 2001 From: Marek Puzyniak Date: Fri, 21 Mar 2014 17:46:56 +0200 Subject: ath10k: add soft/hard firmware crash option to simulate_fw_crash Command WMI_FORCE_FW_HANG_CMDID is not supported in firmware 10.1. In order to have firmware crash simulation functionality also in firmware 10.1 driver can force firmware crash by performing not allowed operation. Driver can deliberately crash firmware when setting vdev param for vdev id out of range. This patch introduces two keywords to simulate_fw_crash: 'soft' which will cause firmware crash that is recoverable by warm firmware reset but supported only in main firmware. 'hard' which will cause firmware crash recoverable by cold firmware reset, this option works for both firmwares. Commands to trigger firmware soft/hard crash: echo 'soft' > /sys/kernel/debug/ieee80211/phyX/ath10k/simulate_fw_crash echo 'hard' > /sys/kernel/debug/ieee80211/phyX/ath10k/simulate_fw_crash kvalo: remove '\n' before checking the command and simplify how buf is null terminated Signed-off-by: Marek Puzyniak Signed-off-by: Kalle Valo --- drivers/net/wireless/ath/ath10k/debug.c | 54 ++++++++++++++++++++++++--------- 1 file changed, 40 insertions(+), 14 deletions(-) (limited to 'drivers/net/wireless/ath/ath10k/debug.c') diff --git a/drivers/net/wireless/ath/ath10k/debug.c b/drivers/net/wireless/ath/ath10k/debug.c index 6debd281350..465d782b9e3 100644 --- a/drivers/net/wireless/ath/ath10k/debug.c +++ b/drivers/net/wireless/ath/ath10k/debug.c @@ -451,27 +451,37 @@ static ssize_t ath10k_read_simulate_fw_crash(struct file *file, char __user *user_buf, size_t count, loff_t *ppos) { - const char buf[] = "To simulate firmware crash write the keyword" - " `crash` to this file.\nThis will force firmware" - " to report a crash to the host system.\n"; + const char buf[] = "To simulate firmware crash write one of the" + " keywords to this file:\n `soft` - this will send" + " WMI_FORCE_FW_HANG_ASSERT to firmware if FW" + " supports that command.\n `hard` - this will send" + " to firmware command with illegal parameters" + " causing firmware crash.\n"; + return simple_read_from_buffer(user_buf, count, ppos, buf, strlen(buf)); } +/* Simulate firmware crash: + * 'soft': Call wmi command causing firmware hang. This firmware hang is + * recoverable by warm firmware reset. + * 'hard': Force firmware crash by setting any vdev parameter for not allowed + * vdev id. This is hard firmware crash because it is recoverable only by cold + * firmware reset. + */ static ssize_t ath10k_write_simulate_fw_crash(struct file *file, const char __user *user_buf, size_t count, loff_t *ppos) { struct ath10k *ar = file->private_data; - char buf[32] = {}; + char buf[32]; int ret; mutex_lock(&ar->conf_mutex); simple_write_to_buffer(buf, sizeof(buf) - 1, ppos, user_buf, count); - if (strcmp(buf, "crash") && strcmp(buf, "crash\n")) { - ret = -EINVAL; - goto exit; - } + + /* make sure that buf is null terminated */ + buf[sizeof(buf) - 1] = 0; if (ar->state != ATH10K_STATE_ON && ar->state != ATH10K_STATE_RESTARTED) { @@ -479,14 +489,30 @@ static ssize_t ath10k_write_simulate_fw_crash(struct file *file, goto exit; } - ath10k_info("simulating firmware crash\n"); + /* drop the possible '\n' from the end */ + if (buf[count - 1] == '\n') { + buf[count - 1] = 0; + count--; + } - ret = ath10k_wmi_force_fw_hang(ar, WMI_FORCE_FW_HANG_ASSERT, 0); - if (ret) - ath10k_warn("failed to force fw hang (%d)\n", ret); + if (!strcmp(buf, "soft")) { + ath10k_info("simulating soft firmware crash\n"); + ret = ath10k_wmi_force_fw_hang(ar, WMI_FORCE_FW_HANG_ASSERT, 0); + } else if (!strcmp(buf, "hard")) { + ath10k_info("simulating hard firmware crash\n"); + ret = ath10k_wmi_vdev_set_param(ar, TARGET_NUM_VDEVS + 1, + ar->wmi.vdev_param->rts_threshold, 0); + } else { + ret = -EINVAL; + goto exit; + } + + if (ret) { + ath10k_warn("failed to simulate firmware crash: %d\n", ret); + goto exit; + } - if (ret == 0) - ret = count; + ret = count; exit: mutex_unlock(&ar->conf_mutex); -- cgit v1.2.3-70-g09d2 From cf0fd562354bf2da8f98348ffab42826e2c976d4 Mon Sep 17 00:00:00 2001 From: Chun-Yeow Yeoh Date: Fri, 21 Mar 2014 17:46:58 +0200 Subject: ath10k: fix the peer mac address in getting stats MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Using the macro to convert the MAC address from WMI word format to char array has lead to the wrong peer mac address printed out while retrieving the peer stats from FW. Fix this. Signed-off-by: Chun-Yeow Yeoh Reviewed-By: Michał Kazior Signed-off-by: Kalle Valo --- drivers/net/wireless/ath/ath10k/debug.c | 4 ++-- drivers/net/wireless/ath/ath10k/wmi.h | 10 ---------- 2 files changed, 2 insertions(+), 12 deletions(-) (limited to 'drivers/net/wireless/ath/ath10k/debug.c') diff --git a/drivers/net/wireless/ath/ath10k/debug.c b/drivers/net/wireless/ath/ath10k/debug.c index 465d782b9e3..2dc598c7308 100644 --- a/drivers/net/wireless/ath/ath10k/debug.c +++ b/drivers/net/wireless/ath/ath10k/debug.c @@ -252,8 +252,8 @@ void ath10k_debug_read_target_stats(struct ath10k *ar, peer_stats = (struct wmi_peer_stats *)tmp; s = &stats->peer_stat[i]; - WMI_MAC_ADDR_TO_CHAR_ARRAY(&peer_stats->peer_macaddr, - s->peer_macaddr); + memcpy(s->peer_macaddr, &peer_stats->peer_macaddr.addr, + ETH_ALEN); s->peer_rssi = __le32_to_cpu(peer_stats->peer_rssi); s->peer_tx_rate = __le32_to_cpu(peer_stats->peer_tx_rate); diff --git a/drivers/net/wireless/ath/ath10k/wmi.h b/drivers/net/wireless/ath/ath10k/wmi.h index e5c12e63986..e0421c271ad 100644 --- a/drivers/net/wireless/ath/ath10k/wmi.h +++ b/drivers/net/wireless/ath/ath10k/wmi.h @@ -198,16 +198,6 @@ struct wmi_mac_addr { } __packed; } __packed; -/* macro to convert MAC address from WMI word format to char array */ -#define WMI_MAC_ADDR_TO_CHAR_ARRAY(pwmi_mac_addr, c_macaddr) do { \ - (c_macaddr)[0] = ((pwmi_mac_addr)->word0) & 0xff; \ - (c_macaddr)[1] = (((pwmi_mac_addr)->word0) >> 8) & 0xff; \ - (c_macaddr)[2] = (((pwmi_mac_addr)->word0) >> 16) & 0xff; \ - (c_macaddr)[3] = (((pwmi_mac_addr)->word0) >> 24) & 0xff; \ - (c_macaddr)[4] = ((pwmi_mac_addr)->word1) & 0xff; \ - (c_macaddr)[5] = (((pwmi_mac_addr)->word1) >> 8) & 0xff; \ - } while (0) - struct wmi_cmd_map { u32 init_cmdid; u32 start_scan_cmdid; -- cgit v1.2.3-70-g09d2 From 23c3aae4a09241429a62a0c3fab3830a4c06490d Mon Sep 17 00:00:00 2001 From: Ben Greear Date: Fri, 28 Mar 2014 14:35:15 +0200 Subject: ath10k: add the Rx rate in FW stats FW stats does provide the Rx rate information. Add this. Tested with firmware 10x firmware. Increase buffer size so more peers can be shown. Signed-off-by: Chun-Yeow Yeoh Signed-off-by: Ben Greear Signed-off-by: Kalle Valo --- drivers/net/wireless/ath/ath10k/core.h | 1 + drivers/net/wireless/ath/ath10k/debug.c | 24 +++++++++++++++++------- drivers/net/wireless/ath/ath10k/wmi.h | 9 ++++++++- 3 files changed, 26 insertions(+), 8 deletions(-) (limited to 'drivers/net/wireless/ath/ath10k/debug.c') diff --git a/drivers/net/wireless/ath/ath10k/core.h b/drivers/net/wireless/ath/ath10k/core.h index ad209a61675..05416508839 100644 --- a/drivers/net/wireless/ath/ath10k/core.h +++ b/drivers/net/wireless/ath/ath10k/core.h @@ -119,6 +119,7 @@ struct ath10k_peer_stat { u8 peer_macaddr[ETH_ALEN]; u32 peer_rssi; u32 peer_tx_rate; + u32 peer_rx_rate; /* 10x only */ }; struct ath10k_target_stats { diff --git a/drivers/net/wireless/ath/ath10k/debug.c b/drivers/net/wireless/ath/ath10k/debug.c index 2dc598c7308..7be284c899f 100644 --- a/drivers/net/wireless/ath/ath10k/debug.c +++ b/drivers/net/wireless/ath/ath10k/debug.c @@ -243,13 +243,13 @@ void ath10k_debug_read_target_stats(struct ath10k *ar, } if (num_peer_stats) { - struct wmi_peer_stats *peer_stats; + struct wmi_peer_stats_10x *peer_stats; struct ath10k_peer_stat *s; stats->peers = num_peer_stats; for (i = 0; i < num_peer_stats; i++) { - peer_stats = (struct wmi_peer_stats *)tmp; + peer_stats = (struct wmi_peer_stats_10x *)tmp; s = &stats->peer_stat[i]; memcpy(s->peer_macaddr, &peer_stats->peer_macaddr.addr, @@ -257,8 +257,15 @@ void ath10k_debug_read_target_stats(struct ath10k *ar, s->peer_rssi = __le32_to_cpu(peer_stats->peer_rssi); s->peer_tx_rate = __le32_to_cpu(peer_stats->peer_tx_rate); - - tmp += sizeof(struct wmi_peer_stats); + if (test_bit(ATH10K_FW_FEATURE_WMI_10X, + ar->fw_features)) { + s->peer_rx_rate = + __le32_to_cpu(peer_stats->peer_rx_rate); + tmp += sizeof(struct wmi_peer_stats_10x); + + } else { + tmp += sizeof(struct wmi_peer_stats_old); + } } } @@ -272,7 +279,7 @@ static ssize_t ath10k_read_fw_stats(struct file *file, char __user *user_buf, struct ath10k *ar = file->private_data; struct ath10k_target_stats *fw_stats; char *buf = NULL; - unsigned int len = 0, buf_len = 2500; + unsigned int len = 0, buf_len = 8000; ssize_t ret_cnt = 0; long left; int i; @@ -411,8 +418,8 @@ static ssize_t ath10k_read_fw_stats(struct file *file, char __user *user_buf, "MPDU errors (FCS, MIC, ENC)", fw_stats->mpdu_errs); len += scnprintf(buf + len, buf_len - len, "\n"); - len += scnprintf(buf + len, buf_len - len, "%30s\n", - "ath10k PEER stats"); + len += scnprintf(buf + len, buf_len - len, "%30s (%d)\n", + "ath10k PEER stats", fw_stats->peers); len += scnprintf(buf + len, buf_len - len, "%30s\n\n", "================="); @@ -425,6 +432,9 @@ static ssize_t ath10k_read_fw_stats(struct file *file, char __user *user_buf, len += scnprintf(buf + len, buf_len - len, "%30s %u\n", "Peer TX rate", fw_stats->peer_stat[i].peer_tx_rate); + len += scnprintf(buf + len, buf_len - len, "%30s %u\n", + "Peer RX rate", + fw_stats->peer_stat[i].peer_rx_rate); len += scnprintf(buf + len, buf_len - len, "\n"); } spin_unlock_bh(&ar->data_lock); diff --git a/drivers/net/wireless/ath/ath10k/wmi.h b/drivers/net/wireless/ath/ath10k/wmi.h index 65eb3439211..02a70e320d8 100644 --- a/drivers/net/wireless/ath/ath10k/wmi.h +++ b/drivers/net/wireless/ath/ath10k/wmi.h @@ -2857,12 +2857,19 @@ struct wmi_vdev_stats { * peer statistics. * TODO: add more stats */ -struct wmi_peer_stats { +struct wmi_peer_stats_old { struct wmi_mac_addr peer_macaddr; __le32 peer_rssi; __le32 peer_tx_rate; } __packed; +struct wmi_peer_stats_10x { + struct wmi_mac_addr peer_macaddr; + __le32 peer_rssi; + __le32 peer_tx_rate; + __le32 peer_rx_rate; +} __packed; + struct wmi_vdev_create_cmd { __le32 vdev_id; __le32 vdev_type; -- cgit v1.2.3-70-g09d2 From 52e346d1e70c0cced4ef1a3f4c9d11f3b6949e53 Mon Sep 17 00:00:00 2001 From: Chun-Yeow Yeoh Date: Fri, 28 Mar 2014 14:35:16 +0200 Subject: ath10k: add extra pdev stats on 10.1 firmware As pointed out by Michal Kazior, add extra pdev stats for 10.1 firmware. Signed-off-by: Chun-Yeow Yeoh Signed-off-by: Kalle Valo --- drivers/net/wireless/ath/ath10k/core.h | 6 ++++++ drivers/net/wireless/ath/ath10k/debug.c | 27 ++++++++++++++++++++++++--- drivers/net/wireless/ath/ath10k/wmi.h | 19 ++++++++++++++++++- 3 files changed, 48 insertions(+), 4 deletions(-) (limited to 'drivers/net/wireless/ath/ath10k/debug.c') diff --git a/drivers/net/wireless/ath/ath10k/core.h b/drivers/net/wireless/ath/ath10k/core.h index 05416508839..8edd6da3c8e 100644 --- a/drivers/net/wireless/ath/ath10k/core.h +++ b/drivers/net/wireless/ath/ath10k/core.h @@ -131,6 +131,12 @@ struct ath10k_target_stats { u32 cycle_count; u32 phy_err_count; u32 chan_tx_power; + u32 ack_rx_bad; + u32 rts_bad; + u32 rts_good; + u32 fcs_bad; + u32 no_beacons; + u32 mib_int_count; /* PDEV TX stats */ s32 comp_queued; diff --git a/drivers/net/wireless/ath/ath10k/debug.c b/drivers/net/wireless/ath/ath10k/debug.c index 7be284c899f..1b7ff4ba122 100644 --- a/drivers/net/wireless/ath/ath10k/debug.c +++ b/drivers/net/wireless/ath/ath10k/debug.c @@ -161,7 +161,7 @@ void ath10k_debug_read_target_stats(struct ath10k *ar, u8 *tmp = ev->data; struct ath10k_target_stats *stats; int num_pdev_stats, num_vdev_stats, num_peer_stats; - struct wmi_pdev_stats *ps; + struct wmi_pdev_stats_10x *ps; int i; spin_lock_bh(&ar->data_lock); @@ -173,7 +173,7 @@ void ath10k_debug_read_target_stats(struct ath10k *ar, num_peer_stats = __le32_to_cpu(ev->num_peer_stats); /* 0 or max peers */ if (num_pdev_stats) { - ps = (struct wmi_pdev_stats *)tmp; + ps = (struct wmi_pdev_stats_10x *)tmp; stats->ch_noise_floor = __le32_to_cpu(ps->chan_nf); stats->tx_frame_count = __le32_to_cpu(ps->tx_frame_count); @@ -228,7 +228,18 @@ void ath10k_debug_read_target_stats(struct ath10k *ar, stats->phy_err_drop = __le32_to_cpu(ps->wal.rx.phy_err_drop); stats->mpdu_errs = __le32_to_cpu(ps->wal.rx.mpdu_errs); - tmp += sizeof(struct wmi_pdev_stats); + if (test_bit(ATH10K_FW_FEATURE_WMI_10X, + ar->fw_features)) { + stats->ack_rx_bad = __le32_to_cpu(ps->ack_rx_bad); + stats->rts_bad = __le32_to_cpu(ps->rts_bad); + stats->rts_good = __le32_to_cpu(ps->rts_good); + stats->fcs_bad = __le32_to_cpu(ps->fcs_bad); + stats->no_beacons = __le32_to_cpu(ps->no_beacons); + stats->mib_int_count = __le32_to_cpu(ps->mib_int_count); + tmp += sizeof(struct wmi_pdev_stats_10x); + } else { + tmp += sizeof(struct wmi_pdev_stats_old); + } } /* 0 or max vdevs */ @@ -327,6 +338,16 @@ static ssize_t ath10k_read_fw_stats(struct file *file, char __user *user_buf, "Cycle count", fw_stats->cycle_count); len += scnprintf(buf + len, buf_len - len, "%30s %10u\n", "PHY error count", fw_stats->phy_err_count); + len += scnprintf(buf + len, buf_len - len, "%30s %10u\n", + "RTS bad count", fw_stats->rts_bad); + len += scnprintf(buf + len, buf_len - len, "%30s %10u\n", + "RTS good count", fw_stats->rts_good); + len += scnprintf(buf + len, buf_len - len, "%30s %10u\n", + "FCS bad count", fw_stats->fcs_bad); + len += scnprintf(buf + len, buf_len - len, "%30s %10u\n", + "No beacon count", fw_stats->no_beacons); + len += scnprintf(buf + len, buf_len - len, "%30s %10u\n", + "MIB int count", fw_stats->mib_int_count); len += scnprintf(buf + len, buf_len - len, "\n"); len += scnprintf(buf + len, buf_len - len, "%30s\n", diff --git a/drivers/net/wireless/ath/ath10k/wmi.h b/drivers/net/wireless/ath/ath10k/wmi.h index 02a70e320d8..ae838221af6 100644 --- a/drivers/net/wireless/ath/ath10k/wmi.h +++ b/drivers/net/wireless/ath/ath10k/wmi.h @@ -2834,7 +2834,7 @@ struct wmi_stats_event { * PDEV statistics * TODO: add all PDEV stats here */ -struct wmi_pdev_stats { +struct wmi_pdev_stats_old { __le32 chan_nf; /* Channel noise floor */ __le32 tx_frame_count; /* TX frame count */ __le32 rx_frame_count; /* RX frame count */ @@ -2845,6 +2845,23 @@ struct wmi_pdev_stats { struct wal_dbg_stats wal; /* WAL dbg stats */ } __packed; +struct wmi_pdev_stats_10x { + __le32 chan_nf; /* Channel noise floor */ + __le32 tx_frame_count; /* TX frame count */ + __le32 rx_frame_count; /* RX frame count */ + __le32 rx_clear_count; /* rx clear count */ + __le32 cycle_count; /* cycle count */ + __le32 phy_err_count; /* Phy error count */ + __le32 chan_tx_pwr; /* channel tx power */ + struct wal_dbg_stats wal; /* WAL dbg stats */ + __le32 ack_rx_bad; + __le32 rts_bad; + __le32 rts_good; + __le32 fcs_bad; + __le32 no_beacons; + __le32 mib_int_count; +} __packed; + /* * VDEV statistics * TODO: add all VDEV stats here -- cgit v1.2.3-70-g09d2