From 37000b305bff81bb1ee2f7f37b1319b670a08f76 Mon Sep 17 00:00:00 2001
From: Pavel Roskin <proski@gnu.org>
Date: Wed, 29 Jun 2011 15:39:43 -0400
Subject: ath5k: fix incorrect use of drvdata in PCI suspend/resume code
Signed-off-by: Pavel Roskin <proski@gnu.org>
Cc: <stable@kernel.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
drivers/net/wireless/ath/ath5k/pci.c | 7 +++++--
1 file changed, 5 insertions(+), 2 deletions(-)
(limited to 'drivers/net/wireless/ath/ath5k/pci.c')
diff --git a/drivers/net/wireless/ath/ath5k/pci.c b/drivers/net/wireless/ath/ath5k/pci.c
index 296c316a834..f2c0c236392 100644
--- a/drivers/net/wireless/ath/ath5k/pci.c
+++ b/drivers/net/wireless/ath/ath5k/pci.c
@@ -297,7 +297,9 @@ ath5k_pci_remove(struct pci_dev *pdev)
#ifdef CONFIG_PM_SLEEP
static int ath5k_pci_suspend(struct device *dev)
{
- struct ath5k_softc *sc = pci_get_drvdata(to_pci_dev(dev));
+ struct pci_dev *pdev = to_pci_dev(dev);
+ struct ieee80211_hw *hw = pci_get_drvdata(pdev);
+ struct ath5k_softc *sc = hw->priv;
ath5k_led_off(sc);
return 0;
@@ -306,7 +308,8 @@ static int ath5k_pci_suspend(struct device *dev)
static int ath5k_pci_resume(struct device *dev)
{
struct pci_dev *pdev = to_pci_dev(dev);
- struct ath5k_softc *sc = pci_get_drvdata(pdev);
+ struct ieee80211_hw *hw = pci_get_drvdata(pdev);
+ struct ath5k_softc *sc = hw->priv;
/*
* Suspend/Resume resets the PCI configuration space, so we have to
--
cgit v1.2.3-70-g09d2
From e4bbf2f541501dcde47ce687ffc6d238bd2f7813 Mon Sep 17 00:00:00 2001
From: Pavel Roskin <proski@gnu.org>
Date: Thu, 7 Jul 2011 18:14:13 -0400
Subject: ath5k: fix formatting errors found by checkpatch.pl
Signed-off-by: Pavel Roskin <proski@gnu.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
drivers/net/wireless/ath/ath5k/ahb.c | 4 +-
drivers/net/wireless/ath/ath5k/ani.c | 2 +-
drivers/net/wireless/ath/ath5k/ath5k.h | 21 ++--
drivers/net/wireless/ath/ath5k/attach.c | 17 ++-
drivers/net/wireless/ath/ath5k/base.c | 24 ++--
drivers/net/wireless/ath/ath5k/base.h | 4 +-
drivers/net/wireless/ath/ath5k/debug.c | 204 ++++++++++++++++----------------
drivers/net/wireless/ath/ath5k/dma.c | 2 +-
drivers/net/wireless/ath/ath5k/eeprom.c | 20 ++--
drivers/net/wireless/ath/ath5k/eeprom.h | 2 +-
drivers/net/wireless/ath/ath5k/led.c | 4 +-
drivers/net/wireless/ath/ath5k/pci.c | 2 +-
drivers/net/wireless/ath/ath5k/pcu.c | 2 +-
drivers/net/wireless/ath/ath5k/phy.c | 46 +++----
drivers/net/wireless/ath/ath5k/reset.c | 8 +-
15 files changed, 182 insertions(+), 180 deletions(-)
(limited to 'drivers/net/wireless/ath/ath5k/pci.c')
diff --git a/drivers/net/wireless/ath/ath5k/ahb.c b/drivers/net/wireless/ath/ath5k/ahb.c
index c38e9e84899..ba682a0b2dd 100644
--- a/drivers/net/wireless/ath/ath5k/ahb.c
+++ b/drivers/net/wireless/ath/ath5k/ahb.c
@@ -167,8 +167,8 @@ static int ath_ahb_probe(struct platform_device *pdev)
* driver for it
*/
if (to_platform_device(sc->dev)->id == 0 &&
- (bcfg->config->flags & (BD_WLAN0|BD_WLAN1)) ==
- (BD_WLAN1|BD_WLAN0))
+ (bcfg->config->flags & (BD_WLAN0 | BD_WLAN1)) ==
+ (BD_WLAN1 | BD_WLAN0))
__set_bit(ATH_STAT_2G_DISABLED, sc->status);
}
diff --git a/drivers/net/wireless/ath/ath5k/ani.c b/drivers/net/wireless/ath/ath5k/ani.c
index f915f404302..a08f17318e6 100644
--- a/drivers/net/wireless/ath/ath5k/ani.c
+++ b/drivers/net/wireless/ath/ath5k/ani.c
@@ -642,7 +642,7 @@ ath5k_ani_init(struct ath5k_hw *ah, enum ath5k_ani_mode mode)
/* initial values for our ani parameters */
if (mode == ATH5K_ANI_MODE_OFF) {
ATH5K_DBG_UNLIMIT(ah->ah_sc, ATH5K_DEBUG_ANI, "ANI off\n");
- } else if (mode == ATH5K_ANI_MODE_MANUAL_LOW) {
+ } else if (mode == ATH5K_ANI_MODE_MANUAL_LOW) {
ATH5K_DBG_UNLIMIT(ah->ah_sc, ATH5K_DEBUG_ANI,
"ANI manual low -> high sensitivity\n");
ath5k_ani_set_noise_immunity_level(ah, 0);
diff --git a/drivers/net/wireless/ath/ath5k/ath5k.h b/drivers/net/wireless/ath/ath5k/ath5k.h
index 68163428fdb..b1de4a09c8c 100644
--- a/drivers/net/wireless/ath/ath5k/ath5k.h
+++ b/drivers/net/wireless/ath/ath5k/ath5k.h
@@ -362,7 +362,7 @@ struct ath5k_srev_name {
/*
* Some of this information is based on Documentation from:
*
- * http://madwifi-project.org/wiki/ChipsetFeatures/SuperAG
+ * http://madwifi-project.org/wiki/ChipsetFeatures/SuperAG
*
* Modulation for Atheros' eXtended Range - range enhancing extension that is
* supposed to double the distance an Atheros client device can keep a
@@ -617,8 +617,8 @@ struct ath5k_rx_status {
#define AR5K_RXERR_FIFO 0x04
#define AR5K_RXERR_DECRYPT 0x08
#define AR5K_RXERR_MIC 0x10
-#define AR5K_RXKEYIX_INVALID ((u8) - 1)
-#define AR5K_TXKEYIX_INVALID ((u32) - 1)
+#define AR5K_RXKEYIX_INVALID ((u8) -1)
+#define AR5K_TXKEYIX_INVALID ((u32) -1)
/**************************\
@@ -679,12 +679,13 @@ struct ath5k_gain {
#define CHANNEL_DYN 0x0400 /* Dynamic CCK-OFDM channel (for g operation) */
#define CHANNEL_XR 0x0800 /* XR channel */
-#define CHANNEL_A (CHANNEL_5GHZ|CHANNEL_OFDM)
-#define CHANNEL_B (CHANNEL_2GHZ|CHANNEL_CCK)
-#define CHANNEL_G (CHANNEL_2GHZ|CHANNEL_OFDM)
-#define CHANNEL_X (CHANNEL_5GHZ|CHANNEL_OFDM|CHANNEL_XR)
+#define CHANNEL_A (CHANNEL_5GHZ | CHANNEL_OFDM)
+#define CHANNEL_B (CHANNEL_2GHZ | CHANNEL_CCK)
+#define CHANNEL_G (CHANNEL_2GHZ | CHANNEL_OFDM)
+#define CHANNEL_X (CHANNEL_5GHZ | CHANNEL_OFDM | CHANNEL_XR)
-#define CHANNEL_ALL (CHANNEL_OFDM|CHANNEL_CCK|CHANNEL_2GHZ|CHANNEL_5GHZ)
+#define CHANNEL_ALL (CHANNEL_OFDM | CHANNEL_CCK | \
+ CHANNEL_2GHZ | CHANNEL_5GHZ)
#define CHANNEL_MODES CHANNEL_ALL
@@ -777,7 +778,7 @@ extern int ath5k_modparam_nohwcrypt;
/*
* Misc definitions
*/
-#define AR5K_RSSI_EP_MULTIPLIER (1<<7)
+#define AR5K_RSSI_EP_MULTIPLIER (1 << 7)
#define AR5K_ASSERT_ENTRY(_e, _s) do { \
if (_e >= _s) \
@@ -1378,7 +1379,7 @@ static inline void __iomem *ath5k_ahb_reg(struct ath5k_hw *ah, u16 reg)
/* On AR2315 and AR2317 the PCI clock domain registers
* are outside of the WMAC register space */
if (unlikely((reg >= 0x4000) && (reg < 0x5000) &&
- (ah->ah_mac_srev >= AR5K_SREV_AR2315_R6)))
+ (ah->ah_mac_srev >= AR5K_SREV_AR2315_R6)))
return AR5K_AR2315_PCI_BASE + reg;
return ah->ah_iobase + reg;
diff --git a/drivers/net/wireless/ath/ath5k/attach.c b/drivers/net/wireless/ath/ath5k/attach.c
index f781eeb5085..d6fbb57a5d9 100644
--- a/drivers/net/wireless/ath/ath5k/attach.c
+++ b/drivers/net/wireless/ath/ath5k/attach.c
@@ -192,7 +192,7 @@ int ath5k_hw_init(struct ath5k_softc *sc)
break;
case AR5K_SREV_RAD_5424:
if (ah->ah_mac_version == AR5K_SREV_AR2425 ||
- ah->ah_mac_version == AR5K_SREV_AR2417){
+ ah->ah_mac_version == AR5K_SREV_AR2417) {
ah->ah_radio = AR5K_RF2425;
ah->ah_single_chip = true;
} else {
@@ -211,28 +211,28 @@ int ath5k_hw_init(struct ath5k_softc *sc)
ah->ah_radio_2ghz_revision = ath5k_hw_radio_revision(ah,
CHANNEL_2GHZ);
} else if (ah->ah_mac_version == (AR5K_SREV_AR2425 >> 4) ||
- ah->ah_mac_version == (AR5K_SREV_AR2417 >> 4) ||
- ah->ah_phy_revision == AR5K_SREV_PHY_2425) {
+ ah->ah_mac_version == (AR5K_SREV_AR2417 >> 4) ||
+ ah->ah_phy_revision == AR5K_SREV_PHY_2425) {
ah->ah_radio = AR5K_RF2425;
ah->ah_single_chip = true;
ah->ah_radio_5ghz_revision = AR5K_SREV_RAD_2425;
} else if (srev == AR5K_SREV_AR5213A &&
- ah->ah_phy_revision == AR5K_SREV_PHY_5212B) {
+ ah->ah_phy_revision == AR5K_SREV_PHY_5212B) {
ah->ah_radio = AR5K_RF5112;
ah->ah_single_chip = false;
ah->ah_radio_5ghz_revision = AR5K_SREV_RAD_5112B;
} else if (ah->ah_mac_version == (AR5K_SREV_AR2415 >> 4) ||
- ah->ah_mac_version == (AR5K_SREV_AR2315_R6 >> 4)) {
+ ah->ah_mac_version == (AR5K_SREV_AR2315_R6 >> 4)) {
ah->ah_radio = AR5K_RF2316;
ah->ah_single_chip = true;
ah->ah_radio_5ghz_revision = AR5K_SREV_RAD_2316;
} else if (ah->ah_mac_version == (AR5K_SREV_AR5414 >> 4) ||
- ah->ah_phy_revision == AR5K_SREV_PHY_5413) {
+ ah->ah_phy_revision == AR5K_SREV_PHY_5413) {
ah->ah_radio = AR5K_RF5413;
ah->ah_single_chip = true;
ah->ah_radio_5ghz_revision = AR5K_SREV_RAD_5413;
} else if (ah->ah_mac_version == (AR5K_SREV_AR2414 >> 4) ||
- ah->ah_phy_revision == AR5K_SREV_PHY_2413) {
+ ah->ah_phy_revision == AR5K_SREV_PHY_2413) {
ah->ah_radio = AR5K_RF2413;
ah->ah_single_chip = true;
ah->ah_radio_5ghz_revision = AR5K_SREV_RAD_2413;
@@ -245,8 +245,7 @@ int ath5k_hw_init(struct ath5k_softc *sc)
/* Return on unsuported chips (unsupported eeprom etc) */
- if ((srev >= AR5K_SREV_AR5416) &&
- (srev < AR5K_SREV_AR2425)) {
+ if ((srev >= AR5K_SREV_AR5416) && (srev < AR5K_SREV_AR2425)) {
ATH5K_ERR(sc, "Device not yet supported.\n");
ret = -ENODEV;
goto err;
diff --git a/drivers/net/wireless/ath/ath5k/base.c b/drivers/net/wireless/ath/ath5k/base.c
index ac873425470..58997d3abae 100644
--- a/drivers/net/wireless/ath/ath5k/base.c
+++ b/drivers/net/wireless/ath/ath5k/base.c
@@ -814,8 +814,7 @@ ath5k_desc_alloc(struct ath5k_softc *sc)
INIT_LIST_HEAD(&sc->txbuf);
sc->txbuf_len = ATH_TXBUF;
- for (i = 0; i < ATH_TXBUF; i++, bf++, ds++,
- da += sizeof(*ds)) {
+ for (i = 0; i < ATH_TXBUF; i++, bf++, ds++, da += sizeof(*ds)) {
bf->desc = ds;
bf->daddr = da;
list_add_tail(&bf->list, &sc->txbuf);
@@ -981,7 +980,7 @@ ath5k_beaconq_config(struct ath5k_softc *sc)
goto err;
if (sc->opmode == NL80211_IFTYPE_AP ||
- sc->opmode == NL80211_IFTYPE_MESH_POINT) {
+ sc->opmode == NL80211_IFTYPE_MESH_POINT) {
/*
* Always burst out beacon and CAB traffic
* (aifs = cwmin = cwmax = 0)
@@ -1261,7 +1260,7 @@ ath5k_update_beacon_rssi(struct ath5k_softc *sc, struct sk_buff *skb, int rssi)
*/
static int ath5k_common_padpos(struct sk_buff *skb)
{
- struct ieee80211_hdr * hdr = (struct ieee80211_hdr *)skb->data;
+ struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)skb->data;
__le16 frame_control = hdr->frame_control;
int padpos = 24;
@@ -1283,13 +1282,13 @@ static int ath5k_add_padding(struct sk_buff *skb)
int padpos = ath5k_common_padpos(skb);
int padsize = padpos & 3;
- if (padsize && skb->len>padpos) {
+ if (padsize && skb->len > padpos) {
if (skb_headroom(skb) < padsize)
return -1;
skb_push(skb, padsize);
- memmove(skb->data, skb->data+padsize, padpos);
+ memmove(skb->data, skb->data + padsize, padpos);
return padsize;
}
@@ -1314,7 +1313,7 @@ static int ath5k_remove_padding(struct sk_buff *skb)
int padpos = ath5k_common_padpos(skb);
int padsize = padpos & 3;
- if (padsize && skb->len>=padpos+padsize) {
+ if (padsize && skb->len >= padpos + padsize) {
memmove(skb->data + padsize, skb->data, padpos);
skb_pull(skb, padsize);
return padsize;
@@ -1709,7 +1708,7 @@ ath5k_tasklet_tx(unsigned long data)
int i;
struct ath5k_softc *sc = (void *)data;
- for (i=0; i < AR5K_NUM_TX_QUEUES; i++)
+ for (i = 0; i < AR5K_NUM_TX_QUEUES; i++)
if (sc->txqs[i].setup && (sc->ah->ah_txq_isr & BIT(i)))
ath5k_tx_processq(sc, &sc->txqs[i]);
@@ -1900,7 +1899,7 @@ ath5k_beacon_send(struct ath5k_softc *sc)
avf = (void *)vif->drv_priv;
bf = avf->bbuf;
if (unlikely(bf->skb == NULL || sc->opmode == NL80211_IFTYPE_STATION ||
- sc->opmode == NL80211_IFTYPE_MONITOR)) {
+ sc->opmode == NL80211_IFTYPE_MONITOR)) {
ATH5K_WARN(sc, "bf=%p bf_skb=%p\n", bf, bf ? bf->skb : NULL);
return;
}
@@ -1917,7 +1916,7 @@ ath5k_beacon_send(struct ath5k_softc *sc)
/* refresh the beacon for AP or MESH mode */
if (sc->opmode == NL80211_IFTYPE_AP ||
- sc->opmode == NL80211_IFTYPE_MESH_POINT)
+ sc->opmode == NL80211_IFTYPE_MESH_POINT)
ath5k_beacon_update(sc->hw, vif);
trace_ath5k_tx(sc, bf->skb, &sc->txqs[sc->bhalq]);
@@ -2485,7 +2484,7 @@ ath5k_init_softc(struct ath5k_softc *sc, const struct ath_bus_ops *bus_ops)
/* Multi chip radio (RF5111 - RF2111) ->
* report both 2GHz/5GHz radios */
else if (sc->ah->ah_radio_5ghz_revision &&
- sc->ah->ah_radio_2ghz_revision){
+ sc->ah->ah_radio_2ghz_revision) {
ATH5K_INFO(sc, "RF%s 5GHz radio found (0x%x)\n",
ath5k_chip_name(AR5K_VERSION_RAD,
sc->ah->ah_radio_5ghz_revision),
@@ -2710,8 +2709,7 @@ ath5k_reset(struct ath5k_softc *sc, struct ieee80211_channel *chan,
fast = ((chan != NULL) && modparam_fastchanswitch) ? 1 : 0;
- ret = ath5k_hw_reset(ah, sc->opmode, sc->curchan, fast,
- skip_pcu);
+ ret = ath5k_hw_reset(ah, sc->opmode, sc->curchan, fast, skip_pcu);
if (ret) {
ATH5K_ERR(sc, "can't reset hardware (%d)\n", ret);
goto err;
diff --git a/drivers/net/wireless/ath/ath5k/base.h b/drivers/net/wireless/ath/ath5k/base.h
index eb035cbe665..e71494ee329 100644
--- a/drivers/net/wireless/ath/ath5k/base.h
+++ b/drivers/net/wireless/ath/ath5k/base.h
@@ -153,9 +153,9 @@ struct ath5k_statistics {
};
#if CHAN_DEBUG
-#define ATH_CHAN_MAX (26+26+26+200+200)
+#define ATH_CHAN_MAX (26 + 26 + 26 + 200 + 200)
#else
-#define ATH_CHAN_MAX (14+14+14+252+20)
+#define ATH_CHAN_MAX (14 + 14 + 14 + 252 + 20)
#endif
struct ath5k_vif {
diff --git a/drivers/net/wireless/ath/ath5k/debug.c b/drivers/net/wireless/ath/ath5k/debug.c
index 0bf7313b8a1..ae1112bfa1c 100644
--- a/drivers/net/wireless/ath/ath5k/debug.c
+++ b/drivers/net/wireless/ath/ath5k/debug.c
@@ -205,35 +205,35 @@ static ssize_t read_file_beacon(struct file *file, char __user *user_buf,
u64 tsf;
v = ath5k_hw_reg_read(sc->ah, AR5K_BEACON);
- len += snprintf(buf+len, sizeof(buf)-len,
+ len += snprintf(buf + len, sizeof(buf) - len,
"%-24s0x%08x\tintval: %d\tTIM: 0x%x\n",
"AR5K_BEACON", v, v & AR5K_BEACON_PERIOD,
(v & AR5K_BEACON_TIM) >> AR5K_BEACON_TIM_S);
- len += snprintf(buf+len, sizeof(buf)-len, "%-24s0x%08x\n",
+ len += snprintf(buf + len, sizeof(buf) - len, "%-24s0x%08x\n",
"AR5K_LAST_TSTP", ath5k_hw_reg_read(sc->ah, AR5K_LAST_TSTP));
- len += snprintf(buf+len, sizeof(buf)-len, "%-24s0x%08x\n\n",
+ len += snprintf(buf + len, sizeof(buf) - len, "%-24s0x%08x\n\n",
"AR5K_BEACON_CNT", ath5k_hw_reg_read(sc->ah, AR5K_BEACON_CNT));
v = ath5k_hw_reg_read(sc->ah, AR5K_TIMER0);
- len += snprintf(buf+len, sizeof(buf)-len, "%-24s0x%08x\tTU: %08x\n",
+ len += snprintf(buf + len, sizeof(buf) - len, "%-24s0x%08x\tTU: %08x\n",
"AR5K_TIMER0 (TBTT)", v, v);
v = ath5k_hw_reg_read(sc->ah, AR5K_TIMER1);
- len += snprintf(buf+len, sizeof(buf)-len, "%-24s0x%08x\tTU: %08x\n",
+ len += snprintf(buf + len, sizeof(buf) - len, "%-24s0x%08x\tTU: %08x\n",
"AR5K_TIMER1 (DMA)", v, v >> 3);
v = ath5k_hw_reg_read(sc->ah, AR5K_TIMER2);
- len += snprintf(buf+len, sizeof(buf)-len, "%-24s0x%08x\tTU: %08x\n",
+ len += snprintf(buf + len, sizeof(buf) - len, "%-24s0x%08x\tTU: %08x\n",
"AR5K_TIMER2 (SWBA)", v, v >> 3);
v = ath5k_hw_reg_read(sc->ah, AR5K_TIMER3);
- len += snprintf(buf+len, sizeof(buf)-len, "%-24s0x%08x\tTU: %08x\n",
+ len += snprintf(buf + len, sizeof(buf) - len, "%-24s0x%08x\tTU: %08x\n",
"AR5K_TIMER3 (ATIM)", v, v);
tsf = ath5k_hw_get_tsf64(sc->ah);
- len += snprintf(buf+len, sizeof(buf)-len,
+ len += snprintf(buf + len, sizeof(buf) - len,
"TSF\t\t0x%016llx\tTU: %08x\n",
(unsigned long long)tsf, TSF_TO_TU(tsf));
@@ -323,16 +323,16 @@ static ssize_t read_file_debug(struct file *file, char __user *user_buf,
unsigned int len = 0;
unsigned int i;
- len += snprintf(buf+len, sizeof(buf)-len,
+ len += snprintf(buf + len, sizeof(buf) - len,
"DEBUG LEVEL: 0x%08x\n\n", sc->debug.level);
for (i = 0; i < ARRAY_SIZE(dbg_info) - 1; i++) {
- len += snprintf(buf+len, sizeof(buf)-len,
+ len += snprintf(buf + len, sizeof(buf) - len,
"%10s %c 0x%08x - %s\n", dbg_info[i].name,
sc->debug.level & dbg_info[i].level ? '+' : ' ',
dbg_info[i].level, dbg_info[i].desc);
}
- len += snprintf(buf+len, sizeof(buf)-len,
+ len += snprintf(buf + len, sizeof(buf) - len,
"%10s %c 0x%08x - %s\n", dbg_info[i].name,
sc->debug.level == dbg_info[i].level ? '+' : ' ',
dbg_info[i].level, dbg_info[i].desc);
@@ -384,60 +384,60 @@ static ssize_t read_file_antenna(struct file *file, char __user *user_buf,
unsigned int i;
unsigned int v;
- len += snprintf(buf+len, sizeof(buf)-len, "antenna mode\t%d\n",
+ len += snprintf(buf + len, sizeof(buf) - len, "antenna mode\t%d\n",
sc->ah->ah_ant_mode);
- len += snprintf(buf+len, sizeof(buf)-len, "default antenna\t%d\n",
+ len += snprintf(buf + len, sizeof(buf) - len, "default antenna\t%d\n",
sc->ah->ah_def_ant);
- len += snprintf(buf+len, sizeof(buf)-len, "tx antenna\t%d\n",
+ len += snprintf(buf + len, sizeof(buf) - len, "tx antenna\t%d\n",
sc->ah->ah_tx_ant);
- len += snprintf(buf+len, sizeof(buf)-len, "\nANTENNA\t\tRX\tTX\n");
+ len += snprintf(buf + len, sizeof(buf) - len, "\nANTENNA\t\tRX\tTX\n");
for (i = 1; i < ARRAY_SIZE(sc->stats.antenna_rx); i++) {
- len += snprintf(buf+len, sizeof(buf)-len,
+ len += snprintf(buf + len, sizeof(buf) - len,
"[antenna %d]\t%d\t%d\n",
i, sc->stats.antenna_rx[i], sc->stats.antenna_tx[i]);
}
- len += snprintf(buf+len, sizeof(buf)-len, "[invalid]\t%d\t%d\n",
+ len += snprintf(buf + len, sizeof(buf) - len, "[invalid]\t%d\t%d\n",
sc->stats.antenna_rx[0], sc->stats.antenna_tx[0]);
v = ath5k_hw_reg_read(sc->ah, AR5K_DEFAULT_ANTENNA);
- len += snprintf(buf+len, sizeof(buf)-len,
+ len += snprintf(buf + len, sizeof(buf) - len,
"\nAR5K_DEFAULT_ANTENNA\t0x%08x\n", v);
v = ath5k_hw_reg_read(sc->ah, AR5K_STA_ID1);
- len += snprintf(buf+len, sizeof(buf)-len,
+ len += snprintf(buf + len, sizeof(buf) - len,
"AR5K_STA_ID1_DEFAULT_ANTENNA\t%d\n",
(v & AR5K_STA_ID1_DEFAULT_ANTENNA) != 0);
- len += snprintf(buf+len, sizeof(buf)-len,
+ len += snprintf(buf + len, sizeof(buf) - len,
"AR5K_STA_ID1_DESC_ANTENNA\t%d\n",
(v & AR5K_STA_ID1_DESC_ANTENNA) != 0);
- len += snprintf(buf+len, sizeof(buf)-len,
+ len += snprintf(buf + len, sizeof(buf) - len,
"AR5K_STA_ID1_RTS_DEF_ANTENNA\t%d\n",
(v & AR5K_STA_ID1_RTS_DEF_ANTENNA) != 0);
- len += snprintf(buf+len, sizeof(buf)-len,
+ len += snprintf(buf + len, sizeof(buf) - len,
"AR5K_STA_ID1_SELFGEN_DEF_ANT\t%d\n",
(v & AR5K_STA_ID1_SELFGEN_DEF_ANT) != 0);
v = ath5k_hw_reg_read(sc->ah, AR5K_PHY_AGCCTL);
- len += snprintf(buf+len, sizeof(buf)-len,
+ len += snprintf(buf + len, sizeof(buf) - len,
"\nAR5K_PHY_AGCCTL_OFDM_DIV_DIS\t%d\n",
(v & AR5K_PHY_AGCCTL_OFDM_DIV_DIS) != 0);
v = ath5k_hw_reg_read(sc->ah, AR5K_PHY_RESTART);
- len += snprintf(buf+len, sizeof(buf)-len,
+ len += snprintf(buf + len, sizeof(buf) - len,
"AR5K_PHY_RESTART_DIV_GC\t\t%x\n",
(v & AR5K_PHY_RESTART_DIV_GC) >> AR5K_PHY_RESTART_DIV_GC_S);
v = ath5k_hw_reg_read(sc->ah, AR5K_PHY_FAST_ANT_DIV);
- len += snprintf(buf+len, sizeof(buf)-len,
+ len += snprintf(buf + len, sizeof(buf) - len,
"AR5K_PHY_FAST_ANT_DIV_EN\t%d\n",
(v & AR5K_PHY_FAST_ANT_DIV_EN) != 0);
v = ath5k_hw_reg_read(sc->ah, AR5K_PHY_ANT_SWITCH_TABLE_0);
- len += snprintf(buf+len, sizeof(buf)-len,
+ len += snprintf(buf + len, sizeof(buf) - len,
"\nAR5K_PHY_ANT_SWITCH_TABLE_0\t0x%08x\n", v);
v = ath5k_hw_reg_read(sc->ah, AR5K_PHY_ANT_SWITCH_TABLE_1);
- len += snprintf(buf+len, sizeof(buf)-len,
+ len += snprintf(buf + len, sizeof(buf) - len,
"AR5K_PHY_ANT_SWITCH_TABLE_1\t0x%08x\n", v);
if (len > sizeof(buf))
@@ -494,36 +494,36 @@ static ssize_t read_file_misc(struct file *file, char __user *user_buf,
unsigned int len = 0;
u32 filt = ath5k_hw_get_rx_filter(sc->ah);
- len += snprintf(buf+len, sizeof(buf)-len, "bssid-mask: %pM\n",
+ len += snprintf(buf + len, sizeof(buf) - len, "bssid-mask: %pM\n",
sc->bssidmask);
- len += snprintf(buf+len, sizeof(buf)-len, "filter-flags: 0x%x ",
+ len += snprintf(buf + len, sizeof(buf) - len, "filter-flags: 0x%x ",
filt);
if (filt & AR5K_RX_FILTER_UCAST)
- len += snprintf(buf+len, sizeof(buf)-len, " UCAST");
+ len += snprintf(buf + len, sizeof(buf) - len, " UCAST");
if (filt & AR5K_RX_FILTER_MCAST)
- len += snprintf(buf+len, sizeof(buf)-len, " MCAST");
+ len += snprintf(buf + len, sizeof(buf) - len, " MCAST");
if (filt & AR5K_RX_FILTER_BCAST)
- len += snprintf(buf+len, sizeof(buf)-len, " BCAST");
+ len += snprintf(buf + len, sizeof(buf) - len, " BCAST");
if (filt & AR5K_RX_FILTER_CONTROL)
- len += snprintf(buf+len, sizeof(buf)-len, " CONTROL");
+ len += snprintf(buf + len, sizeof(buf) - len, " CONTROL");
if (filt & AR5K_RX_FILTER_BEACON)
- len += snprintf(buf+len, sizeof(buf)-len, " BEACON");
+ len += snprintf(buf + len, sizeof(buf) - len, " BEACON");
if (filt & AR5K_RX_FILTER_PROM)
- len += snprintf(buf+len, sizeof(buf)-len, " PROM");
+ len += snprintf(buf + len, sizeof(buf) - len, " PROM");
if (filt & AR5K_RX_FILTER_XRPOLL)
- len += snprintf(buf+len, sizeof(buf)-len, " XRPOLL");
+ len += snprintf(buf + len, sizeof(buf) - len, " XRPOLL");
if (filt & AR5K_RX_FILTER_PROBEREQ)
- len += snprintf(buf+len, sizeof(buf)-len, " PROBEREQ");
+ len += snprintf(buf + len, sizeof(buf) - len, " PROBEREQ");
if (filt & AR5K_RX_FILTER_PHYERR_5212)
- len += snprintf(buf+len, sizeof(buf)-len, " PHYERR-5212");
+ len += snprintf(buf + len, sizeof(buf) - len, " PHYERR-5212");
if (filt & AR5K_RX_FILTER_RADARERR_5212)
- len += snprintf(buf+len, sizeof(buf)-len, " RADARERR-5212");
+ len += snprintf(buf + len, sizeof(buf) - len, " RADARERR-5212");
if (filt & AR5K_RX_FILTER_PHYERR_5211)
- snprintf(buf+len, sizeof(buf)-len, " PHYERR-5211");
+ snprintf(buf + len, sizeof(buf) - len, " PHYERR-5211");
if (filt & AR5K_RX_FILTER_RADARERR_5211)
- len += snprintf(buf+len, sizeof(buf)-len, " RADARERR-5211");
+ len += snprintf(buf + len, sizeof(buf) - len, " RADARERR-5211");
- len += snprintf(buf+len, sizeof(buf)-len, "\nopmode: %s (%d)\n",
+ len += snprintf(buf + len, sizeof(buf) - len, "\nopmode: %s (%d)\n",
ath_opmode_to_string(sc->opmode), sc->opmode);
if (len > sizeof(buf))
@@ -550,65 +550,65 @@ static ssize_t read_file_frameerrors(struct file *file, char __user *user_buf,
unsigned int len = 0;
int i;
- len += snprintf(buf+len, sizeof(buf)-len,
+ len += snprintf(buf + len, sizeof(buf) - len,
"RX\n---------------------\n");
- len += snprintf(buf+len, sizeof(buf)-len, "CRC\t%u\t(%u%%)\n",
+ len += snprintf(buf + len, sizeof(buf) - len, "CRC\t%u\t(%u%%)\n",
st->rxerr_crc,
st->rx_all_count > 0 ?
- st->rxerr_crc*100/st->rx_all_count : 0);
- len += snprintf(buf+len, sizeof(buf)-len, "PHY\t%u\t(%u%%)\n",
+ st->rxerr_crc * 100 / st->rx_all_count : 0);
+ len += snprintf(buf + len, sizeof(buf) - len, "PHY\t%u\t(%u%%)\n",
st->rxerr_phy,
st->rx_all_count > 0 ?
- st->rxerr_phy*100/st->rx_all_count : 0);
+ st->rxerr_phy * 100 / st->rx_all_count : 0);
for (i = 0; i < 32; i++) {
if (st->rxerr_phy_code[i])
- len += snprintf(buf+len, sizeof(buf)-len,
+ len += snprintf(buf + len, sizeof(buf) - len,
" phy_err[%u]\t%u\n",
i, st->rxerr_phy_code[i]);
}
- len += snprintf(buf+len, sizeof(buf)-len, "FIFO\t%u\t(%u%%)\n",
+ len += snprintf(buf + len, sizeof(buf) - len, "FIFO\t%u\t(%u%%)\n",
st->rxerr_fifo,
st->rx_all_count > 0 ?
- st->rxerr_fifo*100/st->rx_all_count : 0);
- len += snprintf(buf+len, sizeof(buf)-len, "decrypt\t%u\t(%u%%)\n",
+ st->rxerr_fifo * 100 / st->rx_all_count : 0);
+ len += snprintf(buf + len, sizeof(buf) - len, "decrypt\t%u\t(%u%%)\n",
st->rxerr_decrypt,
st->rx_all_count > 0 ?
- st->rxerr_decrypt*100/st->rx_all_count : 0);
- len += snprintf(buf+len, sizeof(buf)-len, "MIC\t%u\t(%u%%)\n",
+ st->rxerr_decrypt * 100 / st->rx_all_count : 0);
+ len += snprintf(buf + len, sizeof(buf) - len, "MIC\t%u\t(%u%%)\n",
st->rxerr_mic,
st->rx_all_count > 0 ?
- st->rxerr_mic*100/st->rx_all_count : 0);
- len += snprintf(buf+len, sizeof(buf)-len, "process\t%u\t(%u%%)\n",
+ st->rxerr_mic * 100 / st->rx_all_count : 0);
+ len += snprintf(buf + len, sizeof(buf) - len, "process\t%u\t(%u%%)\n",
st->rxerr_proc,
st->rx_all_count > 0 ?
- st->rxerr_proc*100/st->rx_all_count : 0);
- len += snprintf(buf+len, sizeof(buf)-len, "jumbo\t%u\t(%u%%)\n",
+ st->rxerr_proc * 100 / st->rx_all_count : 0);
+ len += snprintf(buf + len, sizeof(buf) - len, "jumbo\t%u\t(%u%%)\n",
st->rxerr_jumbo,
st->rx_all_count > 0 ?
- st->rxerr_jumbo*100/st->rx_all_count : 0);
- len += snprintf(buf+len, sizeof(buf)-len, "[RX all\t%u]\n",
+ st->rxerr_jumbo * 100 / st->rx_all_count : 0);
+ len += snprintf(buf + len, sizeof(buf) - len, "[RX all\t%u]\n",
st->rx_all_count);
- len += snprintf(buf+len, sizeof(buf)-len, "RX-all-bytes\t%u\n",
+ len += snprintf(buf + len, sizeof(buf) - len, "RX-all-bytes\t%u\n",
st->rx_bytes_count);
- len += snprintf(buf+len, sizeof(buf)-len,
+ len += snprintf(buf + len, sizeof(buf) - len,
"\nTX\n---------------------\n");
- len += snprintf(buf+len, sizeof(buf)-len, "retry\t%u\t(%u%%)\n",
+ len += snprintf(buf + len, sizeof(buf) - len, "retry\t%u\t(%u%%)\n",
st->txerr_retry,
st->tx_all_count > 0 ?
- st->txerr_retry*100/st->tx_all_count : 0);
- len += snprintf(buf+len, sizeof(buf)-len, "FIFO\t%u\t(%u%%)\n",
+ st->txerr_retry * 100 / st->tx_all_count : 0);
+ len += snprintf(buf + len, sizeof(buf) - len, "FIFO\t%u\t(%u%%)\n",
st->txerr_fifo,
st->tx_all_count > 0 ?
- st->txerr_fifo*100/st->tx_all_count : 0);
- len += snprintf(buf+len, sizeof(buf)-len, "filter\t%u\t(%u%%)\n",
+ st->txerr_fifo * 100 / st->tx_all_count : 0);
+ len += snprintf(buf + len, sizeof(buf) - len, "filter\t%u\t(%u%%)\n",
st->txerr_filt,
st->tx_all_count > 0 ?
- st->txerr_filt*100/st->tx_all_count : 0);
- len += snprintf(buf+len, sizeof(buf)-len, "[TX all\t%u]\n",
+ st->txerr_filt * 100 / st->tx_all_count : 0);
+ len += snprintf(buf + len, sizeof(buf) - len, "[TX all\t%u]\n",
st->tx_all_count);
- len += snprintf(buf+len, sizeof(buf)-len, "TX-all-bytes\t%u\n",
+ len += snprintf(buf + len, sizeof(buf) - len, "TX-all-bytes\t%u\n",
st->tx_bytes_count);
if (len > sizeof(buf))
@@ -667,89 +667,93 @@ static ssize_t read_file_ani(struct file *file, char __user *user_buf,
char buf[700];
unsigned int len = 0;
- len += snprintf(buf+len, sizeof(buf)-len,
+ len += snprintf(buf + len, sizeof(buf) - len,
"HW has PHY error counters:\t%s\n",
sc->ah->ah_capabilities.cap_has_phyerr_counters ?
"yes" : "no");
- len += snprintf(buf+len, sizeof(buf)-len,
+ len += snprintf(buf + len, sizeof(buf) - len,
"HW max spur immunity level:\t%d\n",
as->max_spur_level);
- len += snprintf(buf+len, sizeof(buf)-len,
+ len += snprintf(buf + len, sizeof(buf) - len,
"\nANI state\n--------------------------------------------\n");
- len += snprintf(buf+len, sizeof(buf)-len, "operating mode:\t\t\t");
+ len += snprintf(buf + len, sizeof(buf) - len, "operating mode:\t\t\t");
switch (as->ani_mode) {
case ATH5K_ANI_MODE_OFF:
- len += snprintf(buf+len, sizeof(buf)-len, "OFF\n");
+ len += snprintf(buf + len, sizeof(buf) - len, "OFF\n");
break;
case ATH5K_ANI_MODE_MANUAL_LOW:
- len += snprintf(buf+len, sizeof(buf)-len,
+ len += snprintf(buf + len, sizeof(buf) - len,
"MANUAL LOW\n");
break;
case ATH5K_ANI_MODE_MANUAL_HIGH:
- len += snprintf(buf+len, sizeof(buf)-len,
+ len += snprintf(buf + len, sizeof(buf) - len,
"MANUAL HIGH\n");
break;
case ATH5K_ANI_MODE_AUTO:
- len += snprintf(buf+len, sizeof(buf)-len, "AUTO\n");
+ len += snprintf(buf + len, sizeof(buf) - len, "AUTO\n");
break;
default:
- len += snprintf(buf+len, sizeof(buf)-len,
+ len += snprintf(buf + len, sizeof(buf) - len,
"??? (not good)\n");
break;
}
- len += snprintf(buf+len, sizeof(buf)-len,
+ len += snprintf(buf + len, sizeof(buf) - len,
"noise immunity level:\t\t%d\n",
as->noise_imm_level);
- len += snprintf(buf+len, sizeof(buf)-len,
+ len += snprintf(buf + len, sizeof(buf) - len,
"spur immunity level:\t\t%d\n",
as->spur_level);
- len += snprintf(buf+len, sizeof(buf)-len, "firstep level:\t\t\t%d\n",
+ len += snprintf(buf + len, sizeof(buf) - len,
+ "firstep level:\t\t\t%d\n",
as->firstep_level);
- len += snprintf(buf+len, sizeof(buf)-len,
+ len += snprintf(buf + len, sizeof(buf) - len,
"OFDM weak signal detection:\t%s\n",
as->ofdm_weak_sig ? "on" : "off");
- len += snprintf(buf+len, sizeof(buf)-len,
+ len += snprintf(buf + len, sizeof(buf) - len,
"CCK weak signal detection:\t%s\n",
as->cck_weak_sig ? "on" : "off");
- len += snprintf(buf+len, sizeof(buf)-len,
+ len += snprintf(buf + len, sizeof(buf) - len,
"\nMIB INTERRUPTS:\t\t%u\n",
st->mib_intr);
- len += snprintf(buf+len, sizeof(buf)-len,
+ len += snprintf(buf + len, sizeof(buf) - len,
"beacon RSSI average:\t%d\n",
(int)ewma_read(&sc->ah->ah_beacon_rssi_avg));
#define CC_PRINT(_struct, _field) \
_struct._field, \
_struct.cycles > 0 ? \
- _struct._field*100/_struct.cycles : 0
+ _struct._field * 100 / _struct.cycles : 0
- len += snprintf(buf+len, sizeof(buf)-len, "profcnt tx\t\t%u\t(%d%%)\n",
+ len += snprintf(buf + len, sizeof(buf) - len,
+ "profcnt tx\t\t%u\t(%d%%)\n",
CC_PRINT(as->last_cc, tx_frame));
- len += snprintf(buf+len, sizeof(buf)-len, "profcnt rx\t\t%u\t(%d%%)\n",
+ len += snprintf(buf + len, sizeof(buf) - len,
+ "profcnt rx\t\t%u\t(%d%%)\n",
CC_PRINT(as->last_cc, rx_frame));
- len += snprintf(buf+len, sizeof(buf)-len, "profcnt busy\t\t%u\t(%d%%)\n",
+ len += snprintf(buf + len, sizeof(buf) - len,
+ "profcnt busy\t\t%u\t(%d%%)\n",
CC_PRINT(as->last_cc, rx_busy));
#undef CC_PRINT
- len += snprintf(buf+len, sizeof(buf)-len, "profcnt cycles\t\t%u\n",
+ len += snprintf(buf + len, sizeof(buf) - len, "profcnt cycles\t\t%u\n",
as->last_cc.cycles);
- len += snprintf(buf+len, sizeof(buf)-len,
+ len += snprintf(buf + len, sizeof(buf) - len,
"listen time\t\t%d\tlast: %d\n",
as->listen_time, as->last_listen);
- len += snprintf(buf+len, sizeof(buf)-len,
+ len += snprintf(buf + len, sizeof(buf) - len,
"OFDM errors\t\t%u\tlast: %u\tsum: %u\n",
as->ofdm_errors, as->last_ofdm_errors,
as->sum_ofdm_errors);
- len += snprintf(buf+len, sizeof(buf)-len,
+ len += snprintf(buf + len, sizeof(buf) - len,
"CCK errors\t\t%u\tlast: %u\tsum: %u\n",
as->cck_errors, as->last_cck_errors,
as->sum_cck_errors);
- len += snprintf(buf+len, sizeof(buf)-len,
+ len += snprintf(buf + len, sizeof(buf) - len,
"AR5K_PHYERR_CNT1\t%x\t(=%d)\n",
ath5k_hw_reg_read(sc->ah, AR5K_PHYERR_CNT1),
ATH5K_ANI_OFDM_TRIG_HIGH - (ATH5K_PHYERR_CNT_MAX -
ath5k_hw_reg_read(sc->ah, AR5K_PHYERR_CNT1)));
- len += snprintf(buf+len, sizeof(buf)-len,
+ len += snprintf(buf + len, sizeof(buf) - len,
"AR5K_PHYERR_CNT2\t%x\t(=%d)\n",
ath5k_hw_reg_read(sc->ah, AR5K_PHYERR_CNT2),
ATH5K_ANI_CCK_TRIG_HIGH - (ATH5K_PHYERR_CNT_MAX -
@@ -827,13 +831,13 @@ static ssize_t read_file_queue(struct file *file, char __user *user_buf,
struct ath5k_buf *bf, *bf0;
int i, n;
- len += snprintf(buf+len, sizeof(buf)-len,
+ len += snprintf(buf + len, sizeof(buf) - len,
"available txbuffers: %d\n", sc->txbuf_len);
for (i = 0; i < ARRAY_SIZE(sc->txqs); i++) {
txq = &sc->txqs[i];
- len += snprintf(buf+len, sizeof(buf)-len,
+ len += snprintf(buf + len, sizeof(buf) - len,
"%02d: %ssetup\n", i, txq->setup ? "" : "not ");
if (!txq->setup)
@@ -845,9 +849,9 @@ static ssize_t read_file_queue(struct file *file, char __user *user_buf,
n++;
spin_unlock_bh(&txq->lock);
- len += snprintf(buf+len, sizeof(buf)-len,
+ len += snprintf(buf + len, sizeof(buf) - len,
" len: %d bufs: %d\n", txq->txq_len, n);
- len += snprintf(buf+len, sizeof(buf)-len,
+ len += snprintf(buf + len, sizeof(buf) - len,
" stuck: %d\n", txq->txq_stuck);
}
@@ -894,7 +898,7 @@ ath5k_debug_init_device(struct ath5k_softc *sc)
phydir = debugfs_create_dir("ath5k", sc->hw->wiphy->debugfsdir);
if (!phydir)
- return;
+ return;
debugfs_create_file("debug", S_IWUSR | S_IRUSR, phydir, sc,
&fops_debug);
diff --git a/drivers/net/wireless/ath/ath5k/dma.c b/drivers/net/wireless/ath/ath5k/dma.c
index 21091c26a9a..02e2e3f71b0 100644
--- a/drivers/net/wireless/ath/ath5k/dma.c
+++ b/drivers/net/wireless/ath/ath5k/dma.c
@@ -258,7 +258,7 @@ static int ath5k_hw_stop_tx_dma(struct ath5k_hw *ah, unsigned int queue)
/* For 2413+ order PCU to drop packets using
* QUIET mechanism */
if (ah->ah_mac_version >= (AR5K_SREV_AR2414 >> 4) &&
- pending){
+ pending) {
/* Set periodicity and duration */
ath5k_hw_reg_write(ah,
AR5K_REG_SM(100, AR5K_QUIET_CTL2_QT_PER)|
diff --git a/drivers/net/wireless/ath/ath5k/eeprom.c b/drivers/net/wireless/ath/ath5k/eeprom.c
index 0c9d8b18955..f2657bf34fe 100644
--- a/drivers/net/wireless/ath/ath5k/eeprom.c
+++ b/drivers/net/wireless/ath/ath5k/eeprom.c
@@ -255,7 +255,7 @@ static int ath5k_eeprom_read_modes(struct ath5k_hw *ah, u32 *offset,
ee->ee_n_piers[mode] = 0;
AR5K_EEPROM_READ(o++, val);
ee->ee_adc_desired_size[mode] = (s8)((val >> 8) & 0xff);
- switch(mode) {
+ switch (mode) {
case AR5K_EEPROM_MODE_11A:
ee->ee_ob[mode][3] = (val >> 5) & 0x7;
ee->ee_db[mode][3] = (val >> 2) & 0x7;
@@ -349,7 +349,7 @@ static int ath5k_eeprom_read_modes(struct ath5k_hw *ah, u32 *offset,
/* Note: >= v5 have bg freq piers on another location
* so these freq piers are ignored for >= v5 (should be 0xff
* anyway) */
- switch(mode) {
+ switch (mode) {
case AR5K_EEPROM_MODE_11A:
if (ah->ah_ee_version < AR5K_EEPROM_VERSION_4_1)
break;
@@ -422,7 +422,7 @@ static int ath5k_eeprom_read_modes(struct ath5k_hw *ah, u32 *offset,
if (ee->ee_version < AR5K_EEPROM_VERSION_5_0)
goto done;
- switch (mode){
+ switch (mode) {
case AR5K_EEPROM_MODE_11A:
ee->ee_switch_settling_turbo[mode] = (val >> 6) & 0x7f;
@@ -436,7 +436,7 @@ static int ath5k_eeprom_read_modes(struct ath5k_hw *ah, u32 *offset,
ee->ee_adc_desired_size_turbo[mode] |= (val & 0x1) << 7;
ee->ee_pga_desired_size_turbo[mode] = (val >> 1) & 0xff;
- if (AR5K_EEPROM_EEMAP(ee->ee_misc0) >=2)
+ if (AR5K_EEPROM_EEMAP(ee->ee_misc0) >= 2)
ee->ee_pd_gain_overlap = (val >> 9) & 0xf;
break;
case AR5K_EEPROM_MODE_11G:
@@ -516,7 +516,7 @@ ath5k_eeprom_read_freq_list(struct ath5k_hw *ah, int *offset, int max,
u16 val;
ee->ee_n_piers[mode] = 0;
- while(i < max) {
+ while (i < max) {
AR5K_EEPROM_READ(o++, val);
freq1 = val & 0xff;
@@ -602,7 +602,7 @@ ath5k_eeprom_init_11bg_2413(struct ath5k_hw *ah, unsigned int mode, int offset)
struct ath5k_eeprom_info *ee = &ah->ah_capabilities.cap_eeprom;
struct ath5k_chan_pcal_info *pcal;
- switch(mode) {
+ switch (mode) {
case AR5K_EEPROM_MODE_11B:
pcal = ee->ee_pwr_cal_b;
break;
@@ -800,7 +800,7 @@ ath5k_eeprom_read_pcal_info_5111(struct ath5k_hw *ah, int mode)
u16 val;
offset = AR5K_EEPROM_GROUPS_START(ee->ee_version);
- switch(mode) {
+ switch (mode) {
case AR5K_EEPROM_MODE_11A:
if (!AR5K_EEPROM_HDR_11A(ee->ee_header))
return 0;
@@ -1167,7 +1167,7 @@ ath5k_cal_data_offset_2413(struct ath5k_eeprom_info *ee, int mode)
{
u32 offset = AR5K_EEPROM_CAL_DATA_START(ee->ee_misc4);
- switch(mode) {
+ switch (mode) {
case AR5K_EEPROM_MODE_11G:
if (AR5K_EEPROM_HDR_11B(ee->ee_header))
offset += ath5k_pdgains_size_2413(ee,
@@ -1624,8 +1624,8 @@ ath5k_eeprom_read_ctl_info(struct ath5k_hw *ah)
offset += AR5K_EEPROM_GROUPS_START(ee->ee_version);
rep = ee->ee_ctl_pwr;
- for(i = 0; i < ee->ee_ctls; i++) {
- switch(ee->ee_ctl[i] & AR5K_CTL_MODE_M) {
+ for (i = 0; i < ee->ee_ctls; i++) {
+ switch (ee->ee_ctl[i] & AR5K_CTL_MODE_M) {
case AR5K_CTL_11A:
case AR5K_CTL_TURBO:
ctl_mode = AR5K_EEPROM_MODE_11A;
diff --git a/drivers/net/wireless/ath/ath5k/eeprom.h b/drivers/net/wireless/ath/ath5k/eeprom.h
index 6511c27d938..6d440e0ba14 100644
--- a/drivers/net/wireless/ath/ath5k/eeprom.h
+++ b/drivers/net/wireless/ath/ath5k/eeprom.h
@@ -223,7 +223,7 @@
#define AR5K_EEPROM_CCK_OFDM_DELTA 15
#define AR5K_EEPROM_N_IQ_CAL 2
/* 5GHz/2GHz */
-enum ath5k_eeprom_freq_bands{
+enum ath5k_eeprom_freq_bands {
AR5K_EEPROM_BAND_5GHZ = 0,
AR5K_EEPROM_BAND_2GHZ = 1,
AR5K_EEPROM_N_FREQ_BANDS,
diff --git a/drivers/net/wireless/ath/ath5k/led.c b/drivers/net/wireless/ath/ath5k/led.c
index 56f1d95abb0..127bfbd3517 100644
--- a/drivers/net/wireless/ath/ath5k/led.c
+++ b/drivers/net/wireless/ath/ath5k/led.c
@@ -43,11 +43,11 @@
#include "ath5k.h"
#include "base.h"
-#define ATH_SDEVICE(subv,subd) \
+#define ATH_SDEVICE(subv, subd) \
.vendor = PCI_ANY_ID, .device = PCI_ANY_ID, \
.subvendor = (subv), .subdevice = (subd)
-#define ATH_LED(pin,polarity) .driver_data = (((pin) << 8) | (polarity))
+#define ATH_LED(pin, polarity) .driver_data = (((pin) << 8) | (polarity))
#define ATH_PIN(data) ((data) >> 8)
#define ATH_POLARITY(data) ((data) & 0xff)
diff --git a/drivers/net/wireless/ath/ath5k/pci.c b/drivers/net/wireless/ath/ath5k/pci.c
index 296c316a834..bb93796bfaf 100644
--- a/drivers/net/wireless/ath/ath5k/pci.c
+++ b/drivers/net/wireless/ath/ath5k/pci.c
@@ -234,7 +234,7 @@ ath5k_pci_probe(struct pci_dev *pdev,
mem = pci_iomap(pdev, 0, 0);
if (!mem) {
- dev_err(&pdev->dev, "cannot remap PCI memory region\n") ;
+ dev_err(&pdev->dev, "cannot remap PCI memory region\n");
ret = -EIO;
goto err_reg;
}
diff --git a/drivers/net/wireless/ath/ath5k/pcu.c b/drivers/net/wireless/ath/ath5k/pcu.c
index 0a0f63e9675..aecd7241749 100644
--- a/drivers/net/wireless/ath/ath5k/pcu.c
+++ b/drivers/net/wireless/ath/ath5k/pcu.c
@@ -534,7 +534,7 @@ u64 ath5k_hw_get_tsf64(struct ath5k_hw *ah)
local_irq_restore(flags);
- WARN_ON( i == ATH5K_MAX_TSF_READ );
+ WARN_ON(i == ATH5K_MAX_TSF_READ);
return ((u64)tsf_upper1 << 32) | tsf_lower;
}
diff --git a/drivers/net/wireless/ath/ath5k/phy.c b/drivers/net/wireless/ath/ath5k/phy.c
index 4e982b65404..7e2867689e1 100644
--- a/drivers/net/wireless/ath/ath5k/phy.c
+++ b/drivers/net/wireless/ath/ath5k/phy.c
@@ -173,7 +173,7 @@ static unsigned int ath5k_hw_rfb_op(struct ath5k_hw *ah,
data = ath5k_hw_bitswap(val, num_bits);
for (bits_shifted = 0, bits_left = num_bits; bits_left > 0;
- position = 0, entry++) {
+ position = 0, entry++) {
last_bit = (position + bits_left > 8) ? 8 :
position + bits_left;
@@ -472,7 +472,7 @@ static bool ath5k_hw_rf_check_gainf_readback(struct ath5k_hw *ah)
level[0] = 0;
level[1] = (step == 63) ? 50 : step + 4;
level[2] = (step != 63) ? 64 : level[0];
- level[3] = level[2] + 50 ;
+ level[3] = level[2] + 50;
ah->ah_gain.g_high = level[3] -
(step == 63 ? AR5K_GAIN_DYN_ADJUST_HI_MARGIN : -5);
@@ -549,7 +549,7 @@ static s8 ath5k_hw_rf_gainf_adjust(struct ath5k_hw *ah)
for (ah->ah_gain.g_target = ah->ah_gain.g_current;
ah->ah_gain.g_target <= ah->ah_gain.g_low &&
- ah->ah_gain.g_step_idx < go->go_steps_count-1;
+ ah->ah_gain.g_step_idx < go->go_steps_count - 1;
g_step = &go->go_step[ah->ah_gain.g_step_idx])
ah->ah_gain.g_target -= 2 *
(go->go_step[++ah->ah_gain.g_step_idx].gos_gain -
@@ -614,7 +614,7 @@ enum ath5k_rfgain ath5k_hw_gainf_calibrate(struct ath5k_hw *ah)
ath5k_hw_rf_gainf_corr(ah);
ah->ah_gain.g_current =
ah->ah_gain.g_current >= ah->ah_gain.g_f_corr ?
- (ah->ah_gain.g_current-ah->ah_gain.g_f_corr) :
+ (ah->ah_gain.g_current - ah->ah_gain.g_f_corr) :
0;
}
@@ -1331,7 +1331,7 @@ void ath5k_hw_init_nfcal_hist(struct ath5k_hw *ah)
static void ath5k_hw_update_nfcal_hist(struct ath5k_hw *ah, s16 noise_floor)
{
struct ath5k_nfcal_hist *hist = &ah->ah_nfcal_hist;
- hist->index = (hist->index + 1) & (ATH5K_NF_CAL_HIST_MAX-1);
+ hist->index = (hist->index + 1) & (ATH5K_NF_CAL_HIST_MAX - 1);
hist->nfval[hist->index] = noise_floor;
}
@@ -1344,10 +1344,10 @@ static s16 ath5k_hw_get_median_noise_floor(struct ath5k_hw *ah)
memcpy(sort, ah->ah_nfcal_hist.nfval, sizeof(sort));
for (i = 0; i < ATH5K_NF_CAL_HIST_MAX - 1; i++) {
for (j = 1; j < ATH5K_NF_CAL_HIST_MAX - i; j++) {
- if (sort[j] > sort[j-1]) {
+ if (sort[j] > sort[j - 1]) {
tmp = sort[j];
- sort[j] = sort[j-1];
- sort[j-1] = tmp;
+ sort[j] = sort[j - 1];
+ sort[j - 1] = tmp;
}
}
}
@@ -1355,7 +1355,7 @@ static s16 ath5k_hw_get_median_noise_floor(struct ath5k_hw *ah)
ATH5K_DBG(ah->ah_sc, ATH5K_DEBUG_CALIBRATE,
"cal %d:%d\n", i, sort[i]);
}
- return sort[(ATH5K_NF_CAL_HIST_MAX-1) / 2];
+ return sort[(ATH5K_NF_CAL_HIST_MAX - 1) / 2];
}
/*
@@ -2080,7 +2080,7 @@ ath5k_get_interpolated_value(s16 target, s16 x_left, s16 x_right,
* always 1 instead of 1.25, 1.75 etc). We scale up by 100
* to have some accuracy both for 0.5 and 0.25 steps.
*/
- ratio = ((100 * y_right - 100 * y_left)/(x_right - x_left));
+ ratio = ((100 * y_right - 100 * y_left) / (x_right - x_left));
/* Now scale down to be in range */
result = y_left + (ratio * (target - x_left) / 100);
@@ -2159,7 +2159,7 @@ ath5k_create_power_curve(s16 pmin, s16 pmax,
u8 *vpd_table, u8 type)
{
u8 idx[2] = { 0, 1 };
- s16 pwr_i = 2*pmin;
+ s16 pwr_i = 2 * pmin;
int i;
if (num_points < 2)
@@ -2437,7 +2437,7 @@ ath5k_get_max_ctl_power(struct ath5k_hw *ah,
}
if (edge_pwr)
- ah->ah_txpower.txp_max_pwr = 4*min(edge_pwr, max_chan_pwr);
+ ah->ah_txpower.txp_max_pwr = 4 * min(edge_pwr, max_chan_pwr);
}
@@ -2475,8 +2475,8 @@ ath5k_fill_pwr_to_pcdac_table(struct ath5k_hw *ah, s16* table_min,
/* Copy values from pcdac_tmp */
pwr_idx = min_pwr;
- for (i = 0 ; pwr_idx <= max_pwr &&
- pcdac_i < AR5K_EEPROM_POWER_TABLE_SIZE; i++) {
+ for (i = 0; pwr_idx <= max_pwr &&
+ pcdac_i < AR5K_EEPROM_POWER_TABLE_SIZE; i++) {
pcdac_out[pcdac_i++] = pcdac_tmp[i];
pwr_idx++;
}
@@ -2552,7 +2552,7 @@ ath5k_combine_linear_pcdac_curves(struct ath5k_hw *ah, s16* table_min,
}
/* This is used when setting tx power*/
- ah->ah_txpower.txp_min_idx = min_pwr_idx/2;
+ ah->ah_txpower.txp_min_idx = min_pwr_idx / 2;
/* Fill Power to PCDAC table backwards */
pwr = max_pwr_idx;
@@ -2561,10 +2561,10 @@ ath5k_combine_linear_pcdac_curves(struct ath5k_hw *ah, s16* table_min,
* edge flag and set pcdac_tmp to lower
* power curve.*/
if (edge_flag == 0x40 &&
- (2*pwr <= (table_max[1] - table_min[0]) || pwr == 0)) {
+ (2 * pwr <= (table_max[1] - table_min[0]) || pwr == 0)) {
edge_flag = 0x00;
pcdac_tmp = pcdac_low_pwr;
- pwr = mid_pwr_idx/2;
+ pwr = mid_pwr_idx / 2;
}
/* Don't go below 1, extrapolate below if we have
@@ -2604,8 +2604,8 @@ ath5k_write_pcdac_table(struct ath5k_hw *ah)
*/
for (i = 0; i < (AR5K_EEPROM_POWER_TABLE_SIZE / 2); i++) {
ath5k_hw_reg_write(ah,
- (((pcdac_out[2*i + 0] << 8 | 0xff) & 0xffff) << 0) |
- (((pcdac_out[2*i + 1] << 8 | 0xff) & 0xffff) << 16),
+ (((pcdac_out[2 * i + 0] << 8 | 0xff) & 0xffff) << 0) |
+ (((pcdac_out[2 * i + 1] << 8 | 0xff) & 0xffff) << 16),
AR5K_PHY_PCDAC_TXPOWER(i));
}
}
@@ -2789,10 +2789,10 @@ ath5k_write_pwr_to_pdadc_table(struct ath5k_hw *ah, u8 ee_mode)
*/
for (i = 0; i < (AR5K_EEPROM_POWER_TABLE_SIZE / 2); i++) {
ath5k_hw_reg_write(ah,
- ((pdadc_out[4*i + 0] & 0xff) << 0) |
- ((pdadc_out[4*i + 1] & 0xff) << 8) |
- ((pdadc_out[4*i + 2] & 0xff) << 16) |
- ((pdadc_out[4*i + 3] & 0xff) << 24),
+ ((pdadc_out[4 * i + 0] & 0xff) << 0) |
+ ((pdadc_out[4 * i + 1] & 0xff) << 8) |
+ ((pdadc_out[4 * i + 2] & 0xff) << 16) |
+ ((pdadc_out[4 * i + 3] & 0xff) << 24),
AR5K_PHY_PDADC_TXPOWER(i));
}
}
diff --git a/drivers/net/wireless/ath/ath5k/reset.c b/drivers/net/wireless/ath/ath5k/reset.c
index bbeef3aac93..19aefdb7541 100644
--- a/drivers/net/wireless/ath/ath5k/reset.c
+++ b/drivers/net/wireless/ath/ath5k/reset.c
@@ -142,10 +142,10 @@ static void ath5k_hw_init_core_clock(struct ath5k_hw *ah)
/* Set 32MHz USEC counter */
if ((ah->ah_radio == AR5K_RF5112) ||
- (ah->ah_radio == AR5K_RF5413) ||
- (ah->ah_radio == AR5K_RF2316) ||
- (ah->ah_radio == AR5K_RF2317))
- /* Remain on 40MHz clock ? */
+ (ah->ah_radio == AR5K_RF5413) ||
+ (ah->ah_radio == AR5K_RF2316) ||
+ (ah->ah_radio == AR5K_RF2317))
+ /* Remain on 40MHz clock ? */
sclock = 40 - 1;
else
sclock = 32 - 1;
--
cgit v1.2.3-70-g09d2
From 6a2a0e738225fc9ec063f84b79f0adf5c0ed176c Mon Sep 17 00:00:00 2001
From: Pavel Roskin <proski@gnu.org>
Date: Sat, 9 Jul 2011 00:17:51 -0400
Subject: ath5k: fix typos, bad comment formatting and GHz in place of MHz
Signed-off-by: Pavel Roskin <proski@gnu.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
drivers/net/wireless/ath/ath5k/ani.c | 2 +-
drivers/net/wireless/ath/ath5k/ath5k.h | 26 ++++++++---------
drivers/net/wireless/ath/ath5k/attach.c | 4 +--
drivers/net/wireless/ath/ath5k/base.c | 14 ++++-----
drivers/net/wireless/ath/ath5k/base.h | 4 +--
drivers/net/wireless/ath/ath5k/caps.c | 4 +--
drivers/net/wireless/ath/ath5k/desc.h | 4 +--
drivers/net/wireless/ath/ath5k/dma.c | 6 ++--
drivers/net/wireless/ath/ath5k/eeprom.c | 8 ++---
drivers/net/wireless/ath/ath5k/eeprom.h | 10 +++----
drivers/net/wireless/ath/ath5k/initvals.c | 2 +-
drivers/net/wireless/ath/ath5k/mac80211-ops.c | 4 +--
drivers/net/wireless/ath/ath5k/pci.c | 12 ++++----
drivers/net/wireless/ath/ath5k/pcu.c | 12 ++++----
drivers/net/wireless/ath/ath5k/phy.c | 18 ++++++------
drivers/net/wireless/ath/ath5k/reg.h | 42 +++++++++++++--------------
drivers/net/wireless/ath/ath5k/reset.c | 10 +++----
drivers/net/wireless/ath/ath5k/rfgain.h | 6 ++--
18 files changed, 94 insertions(+), 94 deletions(-)
(limited to 'drivers/net/wireless/ath/ath5k/pci.c')
diff --git a/drivers/net/wireless/ath/ath5k/ani.c b/drivers/net/wireless/ath/ath5k/ani.c
index b88d10c3b9e..2f0b967a6d8 100644
--- a/drivers/net/wireless/ath/ath5k/ani.c
+++ b/drivers/net/wireless/ath/ath5k/ani.c
@@ -74,7 +74,7 @@ ath5k_ani_set_noise_immunity_level(struct ath5k_hw *ah, int level)
static const s8 fr[] = { -78, -80 };
#endif
if (level < 0 || level >= ARRAY_SIZE(sz)) {
- ATH5K_ERR(ah->ah_sc, "noise immuniy level %d out of range",
+ ATH5K_ERR(ah->ah_sc, "noise immunity level %d out of range",
level);
return;
}
diff --git a/drivers/net/wireless/ath/ath5k/ath5k.h b/drivers/net/wireless/ath/ath5k/ath5k.h
index b1de4a09c8c..50d75803612 100644
--- a/drivers/net/wireless/ath/ath5k/ath5k.h
+++ b/drivers/net/wireless/ath/ath5k/ath5k.h
@@ -18,9 +18,9 @@
#ifndef _ATH5K_H
#define _ATH5K_H
-/* TODO: Clean up channel debuging -doesn't work anyway- and start
+/* TODO: Clean up channel debugging (doesn't work anyway) and start
* working on reg. control code using all available eeprom information
- * -rev. engineering needed- */
+ * (rev. engineering needed) */
#define CHAN_DEBUG 0
#include <linux/io.h>
@@ -156,7 +156,7 @@
} while (0)
/*
- * Some tuneable values (these should be changeable by the user)
+ * Some tunable values (these should be changeable by the user)
* TODO: Make use of them and add more options OR use debug/configfs
*/
#define AR5K_TUNE_DMA_BEACON_RESP 2
@@ -171,8 +171,8 @@
#define AR5K_TUNE_RSSI_THRES 129
/* This must be set when setting the RSSI threshold otherwise it can
* prevent a reset. If AR5K_RSSI_THR is read after writing to it
- * the BMISS_THRES will be seen as 0, seems harware doesn't keep
- * track of it. Max value depends on harware. For AR5210 this is just 7.
+ * the BMISS_THRES will be seen as 0, seems hardware doesn't keep
+ * track of it. Max value depends on hardware. For AR5210 this is just 7.
* For AR5211+ this seems to be up to 255. */
#define AR5K_TUNE_BMISS_THRES 7
#define AR5K_TUNE_REGISTER_DWELL_TIME 20000
@@ -380,7 +380,7 @@ struct ath5k_srev_name {
* Modulation for Atheros' Turbo G and Turbo A, its supposed to provide a
* throughput transmission speed up to 40Mbit/s-60Mbit/s at a 108Mbit/s
* signaling rate achieved through the bonding of two 54Mbit/s 802.11g
- * channels. To use this feature your Access Point must also suport it.
+ * channels. To use this feature your Access Point must also support it.
* There is also a distinction between "static" and "dynamic" turbo modes:
*
* - Static: is the dumb version: devices set to this mode stick to it until
@@ -496,7 +496,7 @@ enum ath5k_tx_queue {
*/
enum ath5k_tx_queue_subtype {
AR5K_WME_AC_BK = 0, /*Background traffic*/
- AR5K_WME_AC_BE, /*Best-effort (normal) traffic)*/
+ AR5K_WME_AC_BE, /*Best-effort (normal) traffic*/
AR5K_WME_AC_VI, /*Video traffic*/
AR5K_WME_AC_VO, /*Voice traffic*/
};
@@ -690,7 +690,7 @@ struct ath5k_gain {
#define CHANNEL_MODES CHANNEL_ALL
/*
- * Used internaly for reset_tx_queue).
+ * Used internally for ath5k_hw_reset_tx_queue().
* Also see struct struct ieee80211_channel.
*/
#define IS_CHAN_XR(_c) ((_c->hw_value & CHANNEL_XR) != 0)
@@ -712,7 +712,7 @@ struct ath5k_athchan_2ghz {
\******************/
/**
- * Seems the ar5xxx harware supports up to 32 rates, indexed by 1-32.
+ * Seems the ar5xxx hardware supports up to 32 rates, indexed by 1-32.
*
* The rate code is used to get the RX rate or set the TX rate on the
* hardware descriptors. It is also used for internal modulation control
@@ -802,7 +802,7 @@ extern int ath5k_modparam_nohwcrypt;
* http://www.freepatentsonline.com/20030225739.html
* @AR5K_INT_RXORN: Indicates we got RX overrun (eg. no more descriptors).
* Note that Rx overrun is not always fatal, on some chips we can continue
- * operation without reseting the card, that's why int_fatal is not
+ * operation without resetting the card, that's why int_fatal is not
* common for all chips.
* @AR5K_INT_TX: mask to identify received frame interrupts, of type
* AR5K_ISR_TXOK or AR5K_ISR_TXERR
@@ -832,13 +832,13 @@ extern int ath5k_modparam_nohwcrypt;
* AR5K_SIMR2_MCABT, AR5K_SIMR2_SSERR and AR5K_SIMR2_DPERR.
* @AR5K_INT_GLOBAL: Used to clear and set the IER
* @AR5K_INT_NOCARD: signals the card has been removed
- * @AR5K_INT_COMMON: common interrupts shared amogst MACs with the same
+ * @AR5K_INT_COMMON: common interrupts shared among MACs with the same
* bit value
*
* These are mapped to take advantage of some common bits
* between the MACs, to be able to set intr properties
* easier. Some of them are not used yet inside hw.c. Most map
- * to the respective hw interrupt value as they are common amogst different
+ * to the respective hw interrupt value as they are common among different
* MACs.
*/
enum ath5k_int {
@@ -1358,7 +1358,7 @@ int ath5k_hw_phy_init(struct ath5k_hw *ah, struct ieee80211_channel *channel,
u8 mode, bool fast);
/*
- * Functions used internaly
+ * Functions used internally
*/
static inline struct ath_common *ath5k_hw_common(struct ath5k_hw *ah)
diff --git a/drivers/net/wireless/ath/ath5k/attach.c b/drivers/net/wireless/ath/ath5k/attach.c
index d6fbb57a5d9..14dc52e4b50 100644
--- a/drivers/net/wireless/ath/ath5k/attach.c
+++ b/drivers/net/wireless/ath/ath5k/attach.c
@@ -244,7 +244,7 @@ int ath5k_hw_init(struct ath5k_softc *sc)
}
- /* Return on unsuported chips (unsupported eeprom etc) */
+ /* Return on unsupported chips (unsupported eeprom etc) */
if ((srev >= AR5K_SREV_AR5416) && (srev < AR5K_SREV_AR2425)) {
ATH5K_ERR(sc, "Device not yet supported.\n");
ret = -ENODEV;
@@ -285,7 +285,7 @@ int ath5k_hw_init(struct ath5k_softc *sc)
ath5k_hw_reg_write(ah, 0x28000039, AR5K_PCIE_SERDES);
ath5k_hw_reg_write(ah, 0x53160824, AR5K_PCIE_SERDES);
- /* If serdes programing is enabled, increase PCI-E
+ /* If serdes programming is enabled, increase PCI-E
* tx power for systems with long trace from host
* to minicard connector. */
if (ee->ee_serdes)
diff --git a/drivers/net/wireless/ath/ath5k/base.c b/drivers/net/wireless/ath/ath5k/base.c
index 28113e023c6..3e5e9b73f1a 100644
--- a/drivers/net/wireless/ath/ath5k/base.c
+++ b/drivers/net/wireless/ath/ath5k/base.c
@@ -531,7 +531,7 @@ ath5k_update_bssid_mask_and_opmode(struct ath5k_softc *sc,
if (iter_data.n_stas > 1) {
/* If you have multiple STA interfaces connected to
* different APs, ARPs are not received (most of the time?)
- * Enabling PROMISC appears to fix that probem.
+ * Enabling PROMISC appears to fix that problem.
*/
sc->filter_flags |= AR5K_RX_FILTER_PROM;
}
@@ -1349,7 +1349,7 @@ ath5k_receive_frame(struct ath5k_softc *sc, struct sk_buff *skb,
* timestamp (beginning of phy frame, data frame, end of rx?).
* The only thing we know is that it is hardware specific...
* On AR5213 it seems the rx timestamp is at the end of the
- * frame, but i'm not sure.
+ * frame, but I'm not sure.
*
* NOTE: mac80211 defines mactime at the beginning of the first
* data symbol. Since we don't have any time references it's
@@ -1764,7 +1764,7 @@ ath5k_beacon_setup(struct ath5k_softc *sc, struct ath5k_buf *bf)
* 4 beacons to make sure everybody hears our AP.
* When a client tries to associate, hw will keep
* track of the tx antenna to be used for this client
- * automaticaly, based on ACKed packets.
+ * automatically, based on ACKed packets.
*
* Note: AP still listens and transmits RTS on the
* default antenna which is supposed to be an omni.
@@ -2099,11 +2099,11 @@ static void ath5k_tasklet_beacon(unsigned long data)
*
* In IBSS mode we use this interrupt just to
* keep track of the next TBTT (target beacon
- * transmission time) in order to detect wether
+ * transmission time) in order to detect whether
* automatic TSF updates happened.
*/
if (sc->opmode == NL80211_IFTYPE_ADHOC) {
- /* XXX: only if VEOL suppported */
+ /* XXX: only if VEOL supported */
u64 tsf = ath5k_hw_get_tsf64(sc->ah);
sc->nexttbtt += sc->bintval;
ATH5K_DBG(sc, ATH5K_DEBUG_BEACON,
@@ -2466,7 +2466,7 @@ ath5k_init_softc(struct ath5k_softc *sc, const struct ath_bus_ops *bus_ops)
sc->ah->ah_radio_5ghz_revision),
sc->ah->ah_radio_5ghz_revision);
/* No 2GHz support (5110 and some
- * 5Ghz only cards) -> report 5Ghz radio */
+ * 5GHz only cards) -> report 5GHz radio */
} else if (!test_bit(AR5K_MODE_11B,
sc->ah->ah_capabilities.cap_mode)) {
ATH5K_INFO(sc, "RF%s 5GHz radio found (0x%x)\n",
@@ -2796,7 +2796,7 @@ ath5k_init(struct ieee80211_hw *hw)
/*
* Collect the channel list. The 802.11 layer
- * is resposible for filtering this list based
+ * is responsible for filtering this list based
* on settings like the phy mode and regulatory
* domain restrictions.
*/
diff --git a/drivers/net/wireless/ath/ath5k/base.h b/drivers/net/wireless/ath/ath5k/base.h
index e71494ee329..0a98777b937 100644
--- a/drivers/net/wireless/ath/ath5k/base.h
+++ b/drivers/net/wireless/ath/ath5k/base.h
@@ -121,7 +121,7 @@ struct ath5k_statistics {
/* frame errors */
unsigned int rx_all_count; /* all RX frames, including errors */
unsigned int tx_all_count; /* all TX frames, including errors */
- unsigned int rx_bytes_count; /* all RX bytes, including errored pks
+ unsigned int rx_bytes_count; /* all RX bytes, including errored pkts
* and the MAC headers for each packet
*/
unsigned int tx_bytes_count; /* all TX bytes, including errored pkts
@@ -250,7 +250,7 @@ struct ath5k_softc {
unsigned int nexttbtt; /* next beacon time in TU */
struct ath5k_txq *cabq; /* content after beacon */
- int power_level; /* Requested tx power in dbm */
+ int power_level; /* Requested tx power in dBm */
bool assoc; /* associate state */
bool enable_beacon; /* true if beacons are on */
diff --git a/drivers/net/wireless/ath/ath5k/caps.c b/drivers/net/wireless/ath/ath5k/caps.c
index 7dd88e1c3ff..c752982aec0 100644
--- a/drivers/net/wireless/ath/ath5k/caps.c
+++ b/drivers/net/wireless/ath/ath5k/caps.c
@@ -52,8 +52,8 @@ int ath5k_hw_set_capabilities(struct ath5k_hw *ah)
__set_bit(AR5K_MODE_11A, caps->cap_mode);
} else {
/*
- * XXX The tranceiver supports frequencies from 4920 to 6100GHz
- * XXX and from 2312 to 2732GHz. There are problems with the
+ * XXX The transceiver supports frequencies from 4920 to 6100MHz
+ * XXX and from 2312 to 2732MHz. There are problems with the
* XXX current ieee80211 implementation because the IEEE
* XXX channel mapping does not support negative channel
* XXX numbers (2312MHz is channel -19). Of course, this
diff --git a/drivers/net/wireless/ath/ath5k/desc.h b/drivers/net/wireless/ath/ath5k/desc.h
index 2509d0bf037..cfd529b548f 100644
--- a/drivers/net/wireless/ath/ath5k/desc.h
+++ b/drivers/net/wireless/ath/ath5k/desc.h
@@ -58,11 +58,11 @@ struct ath5k_hw_rx_status {
#define AR5K_5210_RX_DESC_STATUS1_FRAME_RECEIVE_OK 0x00000002 /* reception success */
#define AR5K_5210_RX_DESC_STATUS1_CRC_ERROR 0x00000004 /* CRC error */
#define AR5K_5210_RX_DESC_STATUS1_FIFO_OVERRUN_5210 0x00000008 /* [5210] FIFO overrun */
-#define AR5K_5210_RX_DESC_STATUS1_DECRYPT_CRC_ERROR 0x00000010 /* decyption CRC failure */
+#define AR5K_5210_RX_DESC_STATUS1_DECRYPT_CRC_ERROR 0x00000010 /* decryption CRC failure */
#define AR5K_5210_RX_DESC_STATUS1_PHY_ERROR 0x000000e0 /* PHY error */
#define AR5K_5210_RX_DESC_STATUS1_PHY_ERROR_S 5
#define AR5K_5210_RX_DESC_STATUS1_KEY_INDEX_VALID 0x00000100 /* key index valid */
-#define AR5K_5210_RX_DESC_STATUS1_KEY_INDEX 0x00007e00 /* decyption key index */
+#define AR5K_5210_RX_DESC_STATUS1_KEY_INDEX 0x00007e00 /* decryption key index */
#define AR5K_5210_RX_DESC_STATUS1_KEY_INDEX_S 9
#define AR5K_5210_RX_DESC_STATUS1_RECEIVE_TIMESTAMP 0x0fff8000 /* 13 bit of TSF */
#define AR5K_5210_RX_DESC_STATUS1_RECEIVE_TIMESTAMP_S 15
diff --git a/drivers/net/wireless/ath/ath5k/dma.c b/drivers/net/wireless/ath/ath5k/dma.c
index 02e2e3f71b0..b788ecfbdaf 100644
--- a/drivers/net/wireless/ath/ath5k/dma.c
+++ b/drivers/net/wireless/ath/ath5k/dma.c
@@ -25,7 +25,7 @@
*
* Here we setup descriptor pointers (rxdp/txdp) start/stop dma engine and
* handle queue setup for 5210 chipset (rest are handled on qcu.c).
- * Also we setup interrupt mask register (IMR) and read the various iterrupt
+ * Also we setup interrupt mask register (IMR) and read the various interrupt
* status registers (ISR).
*
* TODO: Handle SISR on 5211+ and introduce a function to return the queue
@@ -726,7 +726,7 @@ enum ath5k_int ath5k_hw_set_imr(struct ath5k_hw *ah, enum ath5k_int new_mask)
int_mask |= AR5K_IMR_RXDOPPLER;
/* Note: Per queue interrupt masks
- * are set via reset_tx_queue (qcu.c) */
+ * are set via ath5k_hw_reset_tx_queue() (qcu.c) */
ath5k_hw_reg_write(ah, int_mask, AR5K_PIMR);
ath5k_hw_reg_write(ah, simr2, AR5K_SIMR2);
@@ -783,7 +783,7 @@ void ath5k_hw_dma_init(struct ath5k_hw *ah)
* for all PCI-E cards to be safe).
*
* XXX: need to check 5210 for this
- * TODO: Check out tx triger level, it's always 64 on dumps but I
+ * TODO: Check out tx trigger level, it's always 64 on dumps but I
* guess we can tweak it and see how it goes ;-)
*/
if (ah->ah_version != AR5K_AR5210) {
diff --git a/drivers/net/wireless/ath/ath5k/eeprom.c b/drivers/net/wireless/ath/ath5k/eeprom.c
index f97a540e219..d9e605e3700 100644
--- a/drivers/net/wireless/ath/ath5k/eeprom.c
+++ b/drivers/net/wireless/ath/ath5k/eeprom.c
@@ -634,7 +634,7 @@ ath5k_eeprom_init_11bg_2413(struct ath5k_hw *ah, unsigned int mode, int offset)
/* Used to match PCDAC steps with power values on RF5111 chips
* (eeprom versions < 4). For RF5111 we have 11 pre-defined PCDAC
* steps that match with the power values we read from eeprom. On
- * older eeprom versions (< 3.2) these steps are equaly spaced at
+ * older eeprom versions (< 3.2) these steps are equally spaced at
* 10% of the pcdac curve -until the curve reaches its maximum-
* (11 steps from 0 to 100%) but on newer eeprom versions (>= 3.2)
* these 11 steps are spaced in a different way. This function returns
@@ -764,7 +764,7 @@ ath5k_eeprom_convert_pcal_info_5111(struct ath5k_hw *ah, int mode,
/* Fill raw dataset
* (convert power to 0.25dB units
- * for RF5112 combatibility) */
+ * for RF5112 compatibility) */
for (point = 0; point < pd->pd_points; point++) {
/* Absolute values */
@@ -884,7 +884,7 @@ ath5k_eeprom_read_pcal_info_5111(struct ath5k_hw *ah, int mode)
* Read power calibration for RF5112 chips
*
* For RF5112 we have 4 XPD -eXternal Power Detector- curves
- * for each calibrated channel on 0, -6, -12 and -18dbm but we only
+ * for each calibrated channel on 0, -6, -12 and -18dBm but we only
* use the higher (3) and the lower (0) curves. Each curve has 0.5dB
* power steps on x axis and PCDAC steps on y axis and looks like a
* linear function. To recreate the curve and pass the power values
@@ -1241,7 +1241,7 @@ ath5k_eeprom_convert_pcal_info_2413(struct ath5k_hw *ah, int mode,
/* Fill raw dataset
* convert all pwr levels to
- * quarter dB for RF5112 combatibility */
+ * quarter dB for RF5112 compatibility */
pd->pd_step[0] = pcinfo->pddac_i[pdg];
pd->pd_pwr[0] = 4 * pcinfo->pwr_i[pdg];
diff --git a/drivers/net/wireless/ath/ath5k/eeprom.h b/drivers/net/wireless/ath/ath5k/eeprom.h
index 6d440e0ba14..dc2bcfeadeb 100644
--- a/drivers/net/wireless/ath/ath5k/eeprom.h
+++ b/drivers/net/wireless/ath/ath5k/eeprom.h
@@ -50,7 +50,7 @@
#define AR5K_EEPROM_VERSION AR5K_EEPROM_INFO(1) /* EEPROM Version */
#define AR5K_EEPROM_VERSION_3_0 0x3000 /* No idea what's going on before this version */
-#define AR5K_EEPROM_VERSION_3_1 0x3001 /* ob/db values for 2Ghz (ar5211_rfregs) */
+#define AR5K_EEPROM_VERSION_3_1 0x3001 /* ob/db values for 2GHz (ar5211_rfregs) */
#define AR5K_EEPROM_VERSION_3_2 0x3002 /* different frequency representation (eeprom_bin2freq) */
#define AR5K_EEPROM_VERSION_3_3 0x3003 /* offsets changed, has 32 CTLs (see below) and ee_false_detect (eeprom_read_modes) */
#define AR5K_EEPROM_VERSION_3_4 0x3004 /* has ee_i_gain, ee_cck_ofdm_power_delta (eeprom_read_modes) */
@@ -75,11 +75,11 @@
#define AR5K_EEPROM_HDR_11A(_v) (((_v) >> AR5K_EEPROM_MODE_11A) & 0x1)
#define AR5K_EEPROM_HDR_11B(_v) (((_v) >> AR5K_EEPROM_MODE_11B) & 0x1)
#define AR5K_EEPROM_HDR_11G(_v) (((_v) >> AR5K_EEPROM_MODE_11G) & 0x1)
-#define AR5K_EEPROM_HDR_T_2GHZ_DIS(_v) (((_v) >> 3) & 0x1) /* Disable turbo for 2Ghz */
+#define AR5K_EEPROM_HDR_T_2GHZ_DIS(_v) (((_v) >> 3) & 0x1) /* Disable turbo for 2GHz */
#define AR5K_EEPROM_HDR_T_5GHZ_DBM(_v) (((_v) >> 4) & 0x7f) /* Max turbo power for < 2W power consumption */
#define AR5K_EEPROM_HDR_DEVICE(_v) (((_v) >> 11) & 0x7) /* Device type (1 Cardbus, 2 PCI, 3 MiniPCI, 4 AP) */
#define AR5K_EEPROM_HDR_RFKILL(_v) (((_v) >> 14) & 0x1) /* Device has RFKill support */
-#define AR5K_EEPROM_HDR_T_5GHZ_DIS(_v) (((_v) >> 15) & 0x1) /* Disable turbo for 5Ghz */
+#define AR5K_EEPROM_HDR_T_5GHZ_DIS(_v) (((_v) >> 15) & 0x1) /* Disable turbo for 5GHz */
/* Newer EEPROMs are using a different offset */
#define AR5K_EEPROM_OFF(_v, _v3_0, _v3_3) \
@@ -120,7 +120,7 @@
#define AR5K_EEPROM_FF_DIS(_v) (((_v) >> 2) & 0x1) /* disable fast frames */
#define AR5K_EEPROM_BURST_DIS(_v) (((_v) >> 3) & 0x1) /* disable bursting */
#define AR5K_EEPROM_MAX_QCU(_v) (((_v) >> 4) & 0xf) /* max number of QCUs. defaults to 10 */
-#define AR5K_EEPROM_HEAVY_CLIP_EN(_v) (((_v) >> 8) & 0x1) /* enable heayy clipping */
+#define AR5K_EEPROM_HEAVY_CLIP_EN(_v) (((_v) >> 8) & 0x1) /* enable heavy clipping */
#define AR5K_EEPROM_KEY_CACHE_SIZE(_v) (((_v) >> 12) & 0xf) /* key cache size. defaults to 128 */
#define AR5K_EEPROM_MISC6 AR5K_EEPROM_INFO(10)
@@ -270,7 +270,7 @@ enum ath5k_ctl_mode {
/* Per channel calibration data, used for power table setup */
struct ath5k_chan_pcal_info_rf5111 {
- /* Power levels in half dbm units
+ /* Power levels in half dBm units
* for one power curve. */
u8 pwr[AR5K_EEPROM_N_PWR_POINTS_5111];
/* PCDAC table steps
diff --git a/drivers/net/wireless/ath/ath5k/initvals.c b/drivers/net/wireless/ath/ath5k/initvals.c
index 4bfdc2e20df..855d1af3e71 100644
--- a/drivers/net/wireless/ath/ath5k/initvals.c
+++ b/drivers/net/wireless/ath/ath5k/initvals.c
@@ -1409,7 +1409,7 @@ int ath5k_hw_write_initvals(struct ath5k_hw *ah, u8 mode, bool skip_pcu)
* Write initial register settings
*/
- /* For AR5212 and combatible */
+ /* For AR5212 and compatible */
if (ah->ah_version == AR5K_AR5212) {
/* First set of mode-specific settings */
diff --git a/drivers/net/wireless/ath/ath5k/mac80211-ops.c b/drivers/net/wireless/ath/ath5k/mac80211-ops.c
index 493908299bb..0d5ab3428be 100644
--- a/drivers/net/wireless/ath/ath5k/mac80211-ops.c
+++ b/drivers/net/wireless/ath/ath5k/mac80211-ops.c
@@ -348,7 +348,7 @@ ath5k_prepare_multicast(struct ieee80211_hw *hw,
mfilt[pos / 32] |= (1 << (pos % 32));
/* XXX: we might be able to just do this instead,
* but not sure, needs testing, if we do use this we'd
- * neet to inform below to not reset the mcast */
+ * need to inform below not to reset the mcast */
/* ath5k_hw_set_mcast_filterindex(ah,
* ha->addr[5]); */
}
@@ -471,7 +471,7 @@ ath5k_configure_filter(struct ieee80211_hw *hw, unsigned int changed_flags,
if (iter_data.n_stas > 1) {
/* If you have multiple STA interfaces connected to
* different APs, ARPs are not received (most of the time?)
- * Enabling PROMISC appears to fix that probem.
+ * Enabling PROMISC appears to fix that problem.
*/
rfilt |= AR5K_RX_FILTER_PROM;
}
diff --git a/drivers/net/wireless/ath/ath5k/pci.c b/drivers/net/wireless/ath/ath5k/pci.c
index cd60f0a2f0e..aac5b783194 100644
--- a/drivers/net/wireless/ath/ath5k/pci.c
+++ b/drivers/net/wireless/ath/ath5k/pci.c
@@ -34,12 +34,12 @@ static DEFINE_PCI_DEVICE_TABLE(ath5k_pci_id_table) = {
{ PCI_VDEVICE(3COM_2, 0x0013) }, /* 3com 5212 */
{ PCI_VDEVICE(3COM, 0x0013) }, /* 3com 3CRDAG675 5212 */
{ PCI_VDEVICE(ATHEROS, 0x1014) }, /* IBM minipci 5212 */
- { PCI_VDEVICE(ATHEROS, 0x0014) }, /* 5212 combatible */
- { PCI_VDEVICE(ATHEROS, 0x0015) }, /* 5212 combatible */
- { PCI_VDEVICE(ATHEROS, 0x0016) }, /* 5212 combatible */
- { PCI_VDEVICE(ATHEROS, 0x0017) }, /* 5212 combatible */
- { PCI_VDEVICE(ATHEROS, 0x0018) }, /* 5212 combatible */
- { PCI_VDEVICE(ATHEROS, 0x0019) }, /* 5212 combatible */
+ { PCI_VDEVICE(ATHEROS, 0x0014) }, /* 5212 compatible */
+ { PCI_VDEVICE(ATHEROS, 0x0015) }, /* 5212 compatible */
+ { PCI_VDEVICE(ATHEROS, 0x0016) }, /* 5212 compatible */
+ { PCI_VDEVICE(ATHEROS, 0x0017) }, /* 5212 compatible */
+ { PCI_VDEVICE(ATHEROS, 0x0018) }, /* 5212 compatible */
+ { PCI_VDEVICE(ATHEROS, 0x0019) }, /* 5212 compatible */
{ PCI_VDEVICE(ATHEROS, 0x001a) }, /* 2413 Griffin-lite */
{ PCI_VDEVICE(ATHEROS, 0x001b) }, /* 5413 Eagle */
{ PCI_VDEVICE(ATHEROS, 0x001c) }, /* PCI-E cards */
diff --git a/drivers/net/wireless/ath/ath5k/pcu.c b/drivers/net/wireless/ath/ath5k/pcu.c
index aecd7241749..618ee54d5fe 100644
--- a/drivers/net/wireless/ath/ath5k/pcu.c
+++ b/drivers/net/wireless/ath/ath5k/pcu.c
@@ -32,7 +32,7 @@
#include "base.h"
/*
- * AR5212+ can use higher rates for ack transmition
+ * AR5212+ can use higher rates for ack transmission
* based on current tx rate instead of the base rate.
* It does this to better utilize channel usage.
* This is a mapping between G rates (that cover both
@@ -643,14 +643,14 @@ void ath5k_hw_init_beacon(struct ath5k_hw *ah, u32 next_beacon, u32 interval)
/* Flush any pending BMISS interrupts on ISR by
* performing a clear-on-write operation on PISR
* register for the BMISS bit (writing a bit on
- * ISR togles a reset for that bit and leaves
- * the rest bits intact) */
+ * ISR toggles a reset for that bit and leaves
+ * the remaining bits intact) */
if (ah->ah_version == AR5K_AR5210)
ath5k_hw_reg_write(ah, AR5K_ISR_BMISS, AR5K_ISR);
else
ath5k_hw_reg_write(ah, AR5K_ISR_BMISS, AR5K_PISR);
- /* TODO: Set enchanced sleep registers on AR5212
+ /* TODO: Set enhanced sleep registers on AR5212
* based on vif->bss_conf params, until then
* disable power save reporting.*/
AR5K_REG_DISABLE_BITS(ah, AR5K_STA_ID1, AR5K_STA_ID1_PWR_SV);
@@ -738,7 +738,7 @@ ath5k_hw_check_beacon_timers(struct ath5k_hw *ah, int intval)
dma = ath5k_hw_reg_read(ah, AR5K_TIMER1) >> 3;
/* NOTE: SWBA is different. Having a wrong window there does not
- * stop us from sending data and this condition is catched thru
+ * stop us from sending data and this condition is caught by
* other means (SWBA interrupt) */
if (ath5k_check_timer_win(nbtt, atim, 1, intval) &&
@@ -896,7 +896,7 @@ void ath5k_hw_pcu_init(struct ath5k_hw *ah, enum nl80211_iftype op_mode,
/* Set RSSI/BRSSI thresholds
*
* Note: If we decide to set this value
- * dynamicaly, have in mind that when AR5K_RSSI_THR
+ * dynamically, have in mind that when AR5K_RSSI_THR
* register is read it might return 0x40 if we haven't
* wrote anything to it plus BMISS RSSI threshold is zeroed.
* So doing a save/restore procedure here isn't the right
diff --git a/drivers/net/wireless/ath/ath5k/phy.c b/drivers/net/wireless/ath/ath5k/phy.c
index 7e2867689e1..e00ab5a6694 100644
--- a/drivers/net/wireless/ath/ath5k/phy.c
+++ b/drivers/net/wireless/ath/ath5k/phy.c
@@ -363,7 +363,7 @@ int ath5k_hw_rfgain_opt_init(struct ath5k_hw *ah)
return 0;
}
-/* Schedule a gain probe check on the next transmited packet.
+/* Schedule a gain probe check on the next transmitted packet.
* That means our next packet is going to be sent with lower
* tx power and a Peak to Average Power Detector (PAPD) will try
* to measure the gain.
@@ -620,7 +620,7 @@ enum ath5k_rfgain ath5k_hw_gainf_calibrate(struct ath5k_hw *ah)
/* Check if measurement is ok and if we need
* to adjust gain, schedule a gain adjustment,
- * else switch back to the acive state */
+ * else switch back to the active state */
if (ath5k_hw_rf_check_gainf_readback(ah) &&
AR5K_GAIN_CHECK_ADJUST(&ah->ah_gain) &&
ath5k_hw_rf_gainf_adjust(ah)) {
@@ -807,7 +807,7 @@ static int ath5k_hw_rfregs_init(struct ath5k_hw *ah,
* use b_OB and b_DB parameters stored
* in eeprom on ee->ee_ob[ee_mode][0]
*
- * For all other chips we use OB/DB for 2Ghz
+ * For all other chips we use OB/DB for 2GHz
* stored in the b/g modal section just like
* 802.11a on ee->ee_ob[ee_mode][1] */
if ((ah->ah_radio == AR5K_RF5111) ||
@@ -1259,7 +1259,7 @@ static int ath5k_hw_channel(struct ath5k_hw *ah,
{
int ret;
/*
- * Check bounds supported by the PHY (we don't care about regultory
+ * Check bounds supported by the PHY (we don't care about regulatory
* restrictions at this point). Note: hw_value already has the band
* (CHANNEL_2GHZ, or CHANNEL_5GHZ) so we inform ath5k_channel_ok()
* of the band by that */
@@ -1815,7 +1815,7 @@ ath5k_hw_set_spur_mitigation_filter(struct ath5k_hw *ah,
} else if (ath5k_hw_reg_read(ah, AR5K_PHY_IQ) &
AR5K_PHY_IQ_SPUR_FILT_EN) {
- /* Clean up spur mitigation settings and disable fliter */
+ /* Clean up spur mitigation settings and disable filter */
AR5K_REG_WRITE_BITS(ah, AR5K_PHY_BIN_MASK_CTL,
AR5K_PHY_BIN_MASK_CTL_RATE, 0);
AR5K_REG_DISABLE_BITS(ah, AR5K_PHY_IQ,
@@ -2510,8 +2510,8 @@ ath5k_combine_linear_pcdac_curves(struct ath5k_hw *ah, s16* table_min,
s16 max_pwr_idx;
s16 min_pwr_idx;
s16 mid_pwr_idx = 0;
- /* Edge flag turs on the 7nth bit on the PCDAC
- * to delcare the higher power curve (force values
+ /* Edge flag turns on the 7nth bit on the PCDAC
+ * to declare the higher power curve (force values
* to be greater than 64). If we only have one curve
* we don't need to set this, if we have 2 curves and
* fill the table backwards this can also be used to
@@ -2568,7 +2568,7 @@ ath5k_combine_linear_pcdac_curves(struct ath5k_hw *ah, s16* table_min,
}
/* Don't go below 1, extrapolate below if we have
- * already swithced to the lower power curve -or
+ * already switched to the lower power curve -or
* we only have one curve and edge_flag is zero
* anyway */
if (pcdac_tmp[pwr] < 1 && (edge_flag == 0x00)) {
@@ -2805,7 +2805,7 @@ ath5k_write_pwr_to_pdadc_table(struct ath5k_hw *ah, u8 ee_mode)
/*
* This is the main function that uses all of the above
* to set PCDAC/PDADC table on hw for the current channel.
- * This table is used for tx power calibration on the basband,
+ * This table is used for tx power calibration on the baseband,
* without it we get weird tx power levels and in some cases
* distorted spectral mask
*/
diff --git a/drivers/net/wireless/ath/ath5k/reg.h b/drivers/net/wireless/ath/ath5k/reg.h
index 994d29ace34..f5c1000045d 100644
--- a/drivers/net/wireless/ath/ath5k/reg.h
+++ b/drivers/net/wireless/ath/ath5k/reg.h
@@ -170,7 +170,7 @@
#define AR5K_TXCFG_SDMAMR_S 0
#define AR5K_TXCFG_B_MODE 0x00000008 /* Set b mode for 5111 (enable 2111) */
#define AR5K_TXCFG_TXFSTP 0x00000008 /* TX DMA full Stop [5210] */
-#define AR5K_TXCFG_TXFULL 0x000003f0 /* TX Triger level mask */
+#define AR5K_TXCFG_TXFULL 0x000003f0 /* TX Trigger level mask */
#define AR5K_TXCFG_TXFULL_S 4
#define AR5K_TXCFG_TXFULL_0B 0x00000000
#define AR5K_TXCFG_TXFULL_64B 0x00000010
@@ -283,16 +283,16 @@
*/
#define AR5K_ISR 0x001c /* Register Address [5210] */
#define AR5K_PISR 0x0080 /* Register Address [5211+] */
-#define AR5K_ISR_RXOK 0x00000001 /* Frame successfuly received */
+#define AR5K_ISR_RXOK 0x00000001 /* Frame successfully received */
#define AR5K_ISR_RXDESC 0x00000002 /* RX descriptor request */
#define AR5K_ISR_RXERR 0x00000004 /* Receive error */
#define AR5K_ISR_RXNOFRM 0x00000008 /* No frame received (receive timeout) */
#define AR5K_ISR_RXEOL 0x00000010 /* Empty RX descriptor */
#define AR5K_ISR_RXORN 0x00000020 /* Receive FIFO overrun */
-#define AR5K_ISR_TXOK 0x00000040 /* Frame successfuly transmited */
+#define AR5K_ISR_TXOK 0x00000040 /* Frame successfully transmitted */
#define AR5K_ISR_TXDESC 0x00000080 /* TX descriptor request */
#define AR5K_ISR_TXERR 0x00000100 /* Transmit error */
-#define AR5K_ISR_TXNOFRM 0x00000200 /* No frame transmited (transmit timeout) */
+#define AR5K_ISR_TXNOFRM 0x00000200 /* No frame transmitted (transmit timeout) */
#define AR5K_ISR_TXEOL 0x00000400 /* Empty TX descriptor */
#define AR5K_ISR_TXURN 0x00000800 /* Transmit FIFO underrun */
#define AR5K_ISR_MIB 0x00001000 /* Update MIB counters */
@@ -377,16 +377,16 @@
*/
#define AR5K_IMR 0x0020 /* Register Address [5210] */
#define AR5K_PIMR 0x00a0 /* Register Address [5211+] */
-#define AR5K_IMR_RXOK 0x00000001 /* Frame successfuly received*/
+#define AR5K_IMR_RXOK 0x00000001 /* Frame successfully received*/
#define AR5K_IMR_RXDESC 0x00000002 /* RX descriptor request*/
#define AR5K_IMR_RXERR 0x00000004 /* Receive error*/
#define AR5K_IMR_RXNOFRM 0x00000008 /* No frame received (receive timeout)*/
#define AR5K_IMR_RXEOL 0x00000010 /* Empty RX descriptor*/
#define AR5K_IMR_RXORN 0x00000020 /* Receive FIFO overrun*/
-#define AR5K_IMR_TXOK 0x00000040 /* Frame successfuly transmited*/
+#define AR5K_IMR_TXOK 0x00000040 /* Frame successfully transmitted*/
#define AR5K_IMR_TXDESC 0x00000080 /* TX descriptor request*/
#define AR5K_IMR_TXERR 0x00000100 /* Transmit error*/
-#define AR5K_IMR_TXNOFRM 0x00000200 /* No frame transmited (transmit timeout)*/
+#define AR5K_IMR_TXNOFRM 0x00000200 /* No frame transmitted (transmit timeout)*/
#define AR5K_IMR_TXEOL 0x00000400 /* Empty TX descriptor*/
#define AR5K_IMR_TXURN 0x00000800 /* Transmit FIFO underrun*/
#define AR5K_IMR_MIB 0x00001000 /* Update MIB counters*/
@@ -601,7 +601,7 @@
* QCU misc registers
*/
#define AR5K_QCU_MISC_BASE 0x09c0 /* Register Address -Queue0 MISC */
-#define AR5K_QCU_MISC_FRSHED_M 0x0000000f /* Frame sheduling mask */
+#define AR5K_QCU_MISC_FRSHED_M 0x0000000f /* Frame scheduling mask */
#define AR5K_QCU_MISC_FRSHED_ASAP 0 /* ASAP */
#define AR5K_QCU_MISC_FRSHED_CBR 1 /* Constant Bit Rate */
#define AR5K_QCU_MISC_FRSHED_DBA_GT 2 /* DMA Beacon alert gated */
@@ -653,13 +653,13 @@
* registers [5211+]
*
* These registers control the various characteristics of each queue
- * for 802.11e (WME) combatibility so they go together with
+ * for 802.11e (WME) compatibility so they go together with
* QCU registers in pairs. For each queue we have a QCU mask register,
* (0x1000 - 0x102c), a local-IFS settings register (0x1040 - 0x106c),
* a retry limit register (0x1080 - 0x10ac), a channel time register
* (0x10c0 - 0x10ec), a misc-settings register (0x1100 - 0x112c) and
* a sequence number register (0x1140 - 0x116c). It seems that "global"
- * registers here afect all queues (see use of DCU_GBL_IFS_SLOT in ar5k).
+ * registers here affect all queues (see use of DCU_GBL_IFS_SLOT in ar5k).
* We use the same macros here for easier register access.
*
*/
@@ -779,7 +779,7 @@
* and it's used for generating pseudo-random
* number sequences.
*
- * (If i understand corectly, random numbers are
+ * (If i understand correctly, random numbers are
* used for idle sensing -multiplied with cwmin/max etc-)
*/
#define AR5K_DCU_GBL_IFS_MISC 0x10f0 /* Register Address */
@@ -1007,7 +1007,7 @@
#define AR5K_PCIE_WAEN 0x407c
/*
- * PCI-E Serializer/Desirializer
+ * PCI-E Serializer/Deserializer
* registers
*/
#define AR5K_PCIE_SERDES 0x4080
@@ -1227,7 +1227,7 @@
AR5K_USEC_5210 : AR5K_USEC_5211)
#define AR5K_USEC_1 0x0000007f /* clock cycles for 1us */
#define AR5K_USEC_1_S 0
-#define AR5K_USEC_32 0x00003f80 /* clock cycles for 1us while on 32Mhz clock */
+#define AR5K_USEC_32 0x00003f80 /* clock cycles for 1us while on 32MHz clock */
#define AR5K_USEC_32_S 7
#define AR5K_USEC_TX_LATENCY_5211 0x007fc000
#define AR5K_USEC_TX_LATENCY_5211_S 14
@@ -1632,7 +1632,7 @@
#define AR5K_SLEEP0_NEXT_DTIM 0x0007ffff /* Mask for next DTIM (?) */
#define AR5K_SLEEP0_NEXT_DTIM_S 0
#define AR5K_SLEEP0_ASSUME_DTIM 0x00080000 /* Assume DTIM */
-#define AR5K_SLEEP0_ENH_SLEEP_EN 0x00100000 /* Enable enchanced sleep control */
+#define AR5K_SLEEP0_ENH_SLEEP_EN 0x00100000 /* Enable enhanced sleep control */
#define AR5K_SLEEP0_CABTO 0xff000000 /* Mask for CAB Time Out */
#define AR5K_SLEEP0_CABTO_S 24
@@ -1657,7 +1657,7 @@
/*
* TX power control (TPC) register
*
- * XXX: PCDAC steps (0.5dbm) or DBM ?
+ * XXX: PCDAC steps (0.5dBm) or dBm ?
*
*/
#define AR5K_TXPC 0x80e8 /* Register Address */
@@ -1673,7 +1673,7 @@
/*
* Profile count registers
*
- * These registers can be cleared and freezed with ATH5K_MIBC, but they do not
+ * These registers can be cleared and frozen with ATH5K_MIBC, but they do not
* generate a MIB interrupt.
* Instead of overflowing, they shift by one bit to the right. All registers
* shift together, i.e. when one reaches the max, all shift at the same time by
@@ -1838,7 +1838,7 @@
#define AR5K_PHY_TST2_TRIG_SEL 0x00000007 /* Trigger select (?)*/
#define AR5K_PHY_TST2_TRIG 0x00000010 /* Trigger (?) */
#define AR5K_PHY_TST2_CBUS_MODE 0x00000060 /* Cardbus mode (?) */
-#define AR5K_PHY_TST2_CLK32 0x00000400 /* CLK_OUT is CLK32 (32Khz external) */
+#define AR5K_PHY_TST2_CLK32 0x00000400 /* CLK_OUT is CLK32 (32kHz external) */
#define AR5K_PHY_TST2_CHANCOR_DUMP_EN 0x00000800 /* Enable Chancor dump (?) */
#define AR5K_PHY_TST2_EVEN_CHANCOR_DUMP 0x00001000 /* Even Chancor dump (?) */
#define AR5K_PHY_TST2_RFSILENT_EN 0x00002000 /* Enable RFSILENT */
@@ -2002,7 +2002,7 @@
#define AR5K_PHY_AGCCTL_OFDM_DIV_DIS 0x00000008 /* Disable antenna diversity on OFDM modes */
#define AR5K_PHY_AGCCTL_NF_EN 0x00008000 /* Enable nf calibration to happen (?) */
#define AR5K_PHY_AGCTL_FLTR_CAL 0x00010000 /* Allow filter calibration (?) */
-#define AR5K_PHY_AGCCTL_NF_NOUPDATE 0x00020000 /* Don't update nf automaticaly */
+#define AR5K_PHY_AGCCTL_NF_NOUPDATE 0x00020000 /* Don't update nf automatically */
/*
* PHY noise floor status register (CCA = Clear Channel Assessment)
@@ -2089,7 +2089,7 @@
*
* It's obvious from the code that 0x989c is the buffer register but
* for the other special registers that we write to after sending each
- * packet, i have no idea. So i'll name them BUFFER_CONTROL_X registers
+ * packet, i have no idea. So I'll name them BUFFER_CONTROL_X registers
* for now. It's interesting that they are also used for some other operations.
*/
@@ -2340,7 +2340,7 @@
#define AR5K_PHY_RESTART_DIV_GC_S 18
/*
- * RF Bus access request register (for synth-oly channel switching)
+ * RF Bus access request register (for synth-only channel switching)
*/
#define AR5K_PHY_RFBUS_REQ 0x997C
#define AR5K_PHY_RFBUS_REQ_REQUEST 0x00000001
@@ -2382,7 +2382,7 @@
*/
#define AR5K_BB_GAIN_BASE 0x9b00 /* BaseBand Amplifier Gain table base address */
#define AR5K_BB_GAIN(_n) (AR5K_BB_GAIN_BASE + ((_n) << 2))
-#define AR5K_RF_GAIN_BASE 0x9a00 /* RF Amplrifier Gain table base address */
+#define AR5K_RF_GAIN_BASE 0x9a00 /* RF Amplifier Gain table base address */
#define AR5K_RF_GAIN(_n) (AR5K_RF_GAIN_BASE + ((_n) << 2))
/*
diff --git a/drivers/net/wireless/ath/ath5k/reset.c b/drivers/net/wireless/ath/ath5k/reset.c
index 19aefdb7541..57f2e56bc06 100644
--- a/drivers/net/wireless/ath/ath5k/reset.c
+++ b/drivers/net/wireless/ath/ath5k/reset.c
@@ -213,7 +213,7 @@ static void ath5k_hw_init_core_clock(struct ath5k_hw *ah)
usec_reg = (usec | sclock | txlat | rxlat);
ath5k_hw_reg_write(ah, usec_reg, AR5K_USEC);
- /* On 5112 set tx frane to tx data start delay */
+ /* On 5112 set tx frame to tx data start delay */
if (ah->ah_radio == AR5K_RF5112) {
AR5K_REG_WRITE_BITS(ah, AR5K_PHY_RF_CTL2,
AR5K_PHY_RF_CTL2_TXF2TXD_START,
@@ -539,7 +539,7 @@ int ath5k_hw_on_hold(struct ath5k_hw *ah)
*
* Note: putting PCI core on warm reset on PCI-E cards
* results card to hang and always return 0xffff... so
- * we ingore that flag for PCI-E cards. On PCI cards
+ * we ignore that flag for PCI-E cards. On PCI cards
* this flag gets cleared after 64 PCI clocks.
*/
bus_flags = (pdev && pci_is_pcie(pdev)) ? 0 : AR5K_RESET_CTL_PCI;
@@ -596,7 +596,7 @@ int ath5k_hw_nic_wakeup(struct ath5k_hw *ah, int flags, bool initial)
*
* Note: putting PCI core on warm reset on PCI-E cards
* results card to hang and always return 0xffff... so
- * we ingore that flag for PCI-E cards. On PCI cards
+ * we ignore that flag for PCI-E cards. On PCI cards
* this flag gets cleared after 64 PCI clocks.
*/
bus_flags = (pdev && pci_is_pcie(pdev)) ? 0 : AR5K_RESET_CTL_PCI;
@@ -627,7 +627,7 @@ int ath5k_hw_nic_wakeup(struct ath5k_hw *ah, int flags, bool initial)
return ret;
}
- /* ...reset configuration regiter on Wisoc ...
+ /* ...reset configuration register on Wisoc ...
* ...clear reset control register and pull device out of
* warm reset on others */
if (ath5k_get_bus_type(ah) == ATH_AHB)
@@ -704,7 +704,7 @@ int ath5k_hw_nic_wakeup(struct ath5k_hw *ah, int flags, bool initial)
/*XXX: Can bwmode be used with dynamic mode ?
* (I don't think it supports 44MHz) */
- /* On 2425 initvals TURBO_SHORT is not pressent */
+ /* On 2425 initvals TURBO_SHORT is not present */
if (ah->ah_bwmode == AR5K_BWMODE_40MHZ) {
turbo = AR5K_PHY_TURBO_MODE |
(ah->ah_radio == AR5K_RF2425) ? 0 :
diff --git a/drivers/net/wireless/ath/ath5k/rfgain.h b/drivers/net/wireless/ath/ath5k/rfgain.h
index 70c9a45609f..ebfae052d89 100644
--- a/drivers/net/wireless/ath/ath5k/rfgain.h
+++ b/drivers/net/wireless/ath/ath5k/rfgain.h
@@ -30,7 +30,7 @@ struct ath5k_ini_rfgain {
/* Initial RF Gain settings for RF5111 */
static const struct ath5k_ini_rfgain rfgain_5111[] = {
- /* 5Ghz 2Ghz */
+ /* 5GHz 2GHz */
{ AR5K_RF_GAIN(0), { 0x000001a9, 0x00000000 } },
{ AR5K_RF_GAIN(1), { 0x000001e9, 0x00000040 } },
{ AR5K_RF_GAIN(2), { 0x00000029, 0x00000080 } },
@@ -99,7 +99,7 @@ static const struct ath5k_ini_rfgain rfgain_5111[] = {
/* Initial RF Gain settings for RF5112 */
static const struct ath5k_ini_rfgain rfgain_5112[] = {
- /* 5Ghz 2Ghz */
+ /* 5GHz 2GHz */
{ AR5K_RF_GAIN(0), { 0x00000007, 0x00000007 } },
{ AR5K_RF_GAIN(1), { 0x00000047, 0x00000047 } },
{ AR5K_RF_GAIN(2), { 0x00000087, 0x00000087 } },
@@ -305,7 +305,7 @@ static const struct ath5k_ini_rfgain rfgain_2316[] = {
/* Initial RF Gain settings for RF5413 */
static const struct ath5k_ini_rfgain rfgain_5413[] = {
- /* 5Ghz 2Ghz */
+ /* 5GHz 2GHz */
{ AR5K_RF_GAIN(0), { 0x00000000, 0x00000000 } },
{ AR5K_RF_GAIN(1), { 0x00000040, 0x00000040 } },
{ AR5K_RF_GAIN(2), { 0x00000080, 0x00000080 } },
--
cgit v1.2.3-70-g09d2