From 8ab5415d6c701a59dd6fc2bc93cf476ecc03ada5 Mon Sep 17 00:00:00 2001 From: Jouni Malinen Date: Wed, 9 May 2012 22:14:51 +0300 Subject: ath6kl: Use correct max-scan-SSIDs limit The currently used firmware images support 16 SSIDs in the scan request (indexes 0..15), so update the host driver to use the same limit to allow some more SSIDs to be scanned per request. In addition, change the max-index to max-SSIDs to make it easier to understand the implementation and fix couple of off-by-one checks that could limit the maximum number of entries too strictly. Signed-off-by: Jouni Malinen Signed-off-by: Kalle Valo --- drivers/net/wireless/ath/ath6kl/wmi.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/net/wireless/ath/ath6kl/wmi.c') diff --git a/drivers/net/wireless/ath/ath6kl/wmi.c b/drivers/net/wireless/ath/ath6kl/wmi.c index ee8ec2394c2..bdd3b2c5563 100644 --- a/drivers/net/wireless/ath/ath6kl/wmi.c +++ b/drivers/net/wireless/ath/ath6kl/wmi.c @@ -1995,7 +1995,7 @@ int ath6kl_wmi_probedssid_cmd(struct wmi *wmi, u8 if_idx, u8 index, u8 flag, struct wmi_probed_ssid_cmd *cmd; int ret; - if (index > MAX_PROBED_SSID_INDEX) + if (index >= MAX_PROBED_SSIDS) return -EINVAL; if (ssid_len > sizeof(cmd->ssid)) -- cgit v1.2.3-70-g09d2 From c422d52d0450988ce9a1ffdddb78807538396749 Mon Sep 17 00:00:00 2001 From: Thomas Pedersen Date: Tue, 15 May 2012 00:09:23 -0700 Subject: ath6kl: enable enhanced bmiss detection Enable enhanced bmiss detection if the firmware supports it. This feature is only enabled on some firmwares since it comes with a power cost. Also add a few missing command ids to keep the enums straight. kvalo: fix a compiler with ath6kl_err(), add few empty lines Signed-off-by: Thomas Pedersen Signed-off-by: Kalle Valo --- drivers/net/wireless/ath/ath6kl/cfg80211.c | 30 ++++++++++++++++++++++++++++++ drivers/net/wireless/ath/ath6kl/cfg80211.h | 2 ++ drivers/net/wireless/ath/ath6kl/core.h | 3 +++ drivers/net/wireless/ath/ath6kl/init.c | 3 +++ drivers/net/wireless/ath/ath6kl/wmi.c | 19 +++++++++++++++++++ drivers/net/wireless/ath/ath6kl/wmi.h | 11 +++++++++++ 6 files changed, 68 insertions(+) (limited to 'drivers/net/wireless/ath/ath6kl/wmi.c') diff --git a/drivers/net/wireless/ath/ath6kl/cfg80211.c b/drivers/net/wireless/ath/ath6kl/cfg80211.c index 22843a1b9f2..e68b1077816 100644 --- a/drivers/net/wireless/ath/ath6kl/cfg80211.c +++ b/drivers/net/wireless/ath/ath6kl/cfg80211.c @@ -576,6 +576,9 @@ static int ath6kl_cfg80211_connect(struct wiphy *wiphy, struct net_device *dev, vif->nw_type = vif->next_mode; + /* enable enhanced bmiss detection if applicable */ + ath6kl_cfg80211_sta_bmiss_enhance(vif, true); + if (vif->wdev.iftype == NL80211_IFTYPE_P2P_CLIENT) nw_subtype = SUBTYPE_P2PCLIENT; @@ -1512,6 +1515,9 @@ static int ath6kl_cfg80211_change_iface(struct wiphy *wiphy, } } + /* need to clean up enhanced bmiss detection fw state */ + ath6kl_cfg80211_sta_bmiss_enhance(vif, false); + set_iface_type: switch (type) { case NL80211_IFTYPE_STATION: @@ -2618,6 +2624,30 @@ static int ath6kl_set_channel(struct wiphy *wiphy, struct net_device *dev, return 0; } +void ath6kl_cfg80211_sta_bmiss_enhance(struct ath6kl_vif *vif, bool enable) +{ + int err; + + if (WARN_ON(!test_bit(WMI_READY, &vif->ar->flag))) + return; + + if (vif->nw_type != INFRA_NETWORK) + return; + + if (!test_bit(ATH6KL_FW_CAPABILITY_BMISS_ENHANCE, + vif->ar->fw_capabilities)) + return; + + ath6kl_dbg(ATH6KL_DBG_WLAN_CFG, "%s fw bmiss enhance\n", + enable ? "enable" : "disable"); + + err = ath6kl_wmi_sta_bmiss_enhance_cmd(vif->ar->wmi, + vif->fw_vif_idx, enable); + if (err) + ath6kl_err("failed to %s enhanced bmiss detection: %d\n", + enable ? "enable" : "disable", err); +} + static int ath6kl_get_rsn_capab(struct cfg80211_beacon_data *beacon, u8 *rsn_capab) { diff --git a/drivers/net/wireless/ath/ath6kl/cfg80211.h b/drivers/net/wireless/ath/ath6kl/cfg80211.h index 5ea8cbb79f4..b992046a1b0 100644 --- a/drivers/net/wireless/ath/ath6kl/cfg80211.h +++ b/drivers/net/wireless/ath/ath6kl/cfg80211.h @@ -62,5 +62,7 @@ void ath6kl_cfg80211_cleanup(struct ath6kl *ar); struct ath6kl *ath6kl_cfg80211_create(void); void ath6kl_cfg80211_destroy(struct ath6kl *ar); +/* TODO: remove this once ath6kl_vif_cleanup() is moved to cfg80211.c */ +void ath6kl_cfg80211_sta_bmiss_enhance(struct ath6kl_vif *vif, bool enable); #endif /* ATH6KL_CFG80211_H */ diff --git a/drivers/net/wireless/ath/ath6kl/core.h b/drivers/net/wireless/ath/ath6kl/core.h index 79c7055674b..99169794ff3 100644 --- a/drivers/net/wireless/ath/ath6kl/core.h +++ b/drivers/net/wireless/ath/ath6kl/core.h @@ -107,6 +107,9 @@ enum ath6kl_fw_capability { */ ATH6KL_FW_CAPABILITY_WOW_MULTICAST_FILTER, + /* Firmware supports enhanced bmiss detection */ + ATH6KL_FW_CAPABILITY_BMISS_ENHANCE, + /* this needs to be last */ ATH6KL_FW_CAPABILITY_MAX, }; diff --git a/drivers/net/wireless/ath/ath6kl/init.c b/drivers/net/wireless/ath/ath6kl/init.c index 7eb0515f458..10de1322e70 100644 --- a/drivers/net/wireless/ath/ath6kl/init.c +++ b/drivers/net/wireless/ath/ath6kl/init.c @@ -1659,6 +1659,9 @@ void ath6kl_cleanup_vif(struct ath6kl_vif *vif, bool wmi_ready) cfg80211_scan_done(vif->scan_req, true); vif->scan_req = NULL; } + + /* need to clean up enhanced bmiss detection fw state */ + ath6kl_cfg80211_sta_bmiss_enhance(vif, false); } void ath6kl_stop_txrx(struct ath6kl *ar) diff --git a/drivers/net/wireless/ath/ath6kl/wmi.c b/drivers/net/wireless/ath/ath6kl/wmi.c index bdd3b2c5563..6ad762daa42 100644 --- a/drivers/net/wireless/ath/ath6kl/wmi.c +++ b/drivers/net/wireless/ath/ath6kl/wmi.c @@ -2997,6 +2997,25 @@ int ath6kl_wmi_add_del_mcast_filter_cmd(struct wmi *wmi, u8 if_idx, return ret; } +int ath6kl_wmi_sta_bmiss_enhance_cmd(struct wmi *wmi, u8 if_idx, bool enhance) +{ + struct sk_buff *skb; + struct wmi_sta_bmiss_enhance_cmd *cmd; + int ret; + + skb = ath6kl_wmi_get_new_buf(sizeof(*cmd)); + if (!skb) + return -ENOMEM; + + cmd = (struct wmi_sta_bmiss_enhance_cmd *) skb->data; + cmd->enable = enhance ? 1 : 0; + + ret = ath6kl_wmi_cmd_send(wmi, if_idx, skb, + WMI_STA_BMISS_ENHANCE_CMDID, + NO_SYNC_WMIFLAG); + return ret; +} + s32 ath6kl_wmi_get_rate(s8 rate_index) { if (rate_index == RATE_AUTO) diff --git a/drivers/net/wireless/ath/ath6kl/wmi.h b/drivers/net/wireless/ath/ath6kl/wmi.h index 3518550e350..8c07e3858b1 100644 --- a/drivers/net/wireless/ath/ath6kl/wmi.h +++ b/drivers/net/wireless/ath/ath6kl/wmi.h @@ -624,6 +624,10 @@ enum wmi_cmd_id { WMI_SEND_MGMT_CMDID, WMI_BEGIN_SCAN_CMDID, + WMI_SET_BLACK_LIST, + WMI_SET_MCASTRATE, + + WMI_STA_BMISS_ENHANCE_CMDID, }; enum wmi_mgmt_frame_type { @@ -1017,6 +1021,11 @@ struct wmi_bmiss_time_cmd { __le16 num_beacons; }; +/* WMI_STA_ENHANCE_BMISS_CMDID */ +struct wmi_sta_bmiss_enhance_cmd { + u8 enable; +} __packed; + /* WMI_SET_POWER_MODE_CMDID */ enum wmi_power_mode { REC_POWER = 0x01, @@ -2547,6 +2556,8 @@ int ath6kl_wmi_set_roam_mode_cmd(struct wmi *wmi, enum wmi_roam_mode mode); int ath6kl_wmi_mcast_filter_cmd(struct wmi *wmi, u8 if_idx, bool mc_all_on); int ath6kl_wmi_add_del_mcast_filter_cmd(struct wmi *wmi, u8 if_idx, u8 *filter, bool add_filter); +int ath6kl_wmi_sta_bmiss_enhance_cmd(struct wmi *wmi, u8 if_idx, bool enable); + /* AP mode uAPSD */ int ath6kl_wmi_ap_set_apsd(struct wmi *wmi, u8 if_idx, u8 enable); -- cgit v1.2.3-70-g09d2 From 06e360ace9434bf37164fd87941b797cc0f3cb7e Mon Sep 17 00:00:00 2001 From: Bala Shanmugam Date: Tue, 22 May 2012 13:23:12 +0530 Subject: ath6kl: Add support for setting tx rateset. Tx legacy and mcs rateset can configured using iw for 2.4 and 5 bands. Add support for the same in driver. kvalo: add an enum for the hw flags and rename the flag accordingly, rename ath6kl_cfg80211_set_bitrate_mask() to a shorter version to make it easier to indent Signed-off-by: Bala Shanmugam Signed-off-by: Kalle Valo --- drivers/net/wireless/ath/ath6kl/cfg80211.c | 24 +++++++ drivers/net/wireless/ath/ath6kl/core.h | 6 ++ drivers/net/wireless/ath/ath6kl/init.c | 5 ++ drivers/net/wireless/ath/ath6kl/wmi.c | 109 +++++++++++++++++++++++++++++ drivers/net/wireless/ath/ath6kl/wmi.h | 32 +++++++++ 5 files changed, 176 insertions(+) (limited to 'drivers/net/wireless/ath/ath6kl/wmi.c') diff --git a/drivers/net/wireless/ath/ath6kl/cfg80211.c b/drivers/net/wireless/ath/ath6kl/cfg80211.c index 7845d33deed..6a934e16ae8 100644 --- a/drivers/net/wireless/ath/ath6kl/cfg80211.c +++ b/drivers/net/wireless/ath/ath6kl/cfg80211.c @@ -3320,6 +3320,18 @@ static int ath6kl_cfg80211_sscan_stop(struct wiphy *wiphy, return 0; } +static int ath6kl_cfg80211_set_bitrate(struct wiphy *wiphy, + struct net_device *dev, + const u8 *addr, + const struct cfg80211_bitrate_mask *mask) +{ + struct ath6kl *ar = ath6kl_priv(dev); + struct ath6kl_vif *vif = netdev_priv(dev); + + return ath6kl_wmi_set_bitrate_mask(ar->wmi, vif->fw_vif_idx, + mask); +} + static const struct ieee80211_txrx_stypes ath6kl_mgmt_stypes[NUM_NL80211_IFTYPES] = { [NL80211_IFTYPE_STATION] = { @@ -3386,6 +3398,7 @@ static struct cfg80211_ops ath6kl_cfg80211_ops = { .mgmt_frame_register = ath6kl_mgmt_frame_register, .sched_scan_start = ath6kl_cfg80211_sscan_start, .sched_scan_stop = ath6kl_cfg80211_sscan_stop, + .set_bitrate_mask = ath6kl_cfg80211_set_bitrate, }; void ath6kl_cfg80211_stop(struct ath6kl_vif *vif) @@ -3616,6 +3629,17 @@ int ath6kl_cfg80211_init(struct ath6kl *ar) ath6kl_band_5ghz.ht_cap.cap = 0; ath6kl_band_5ghz.ht_cap.ht_supported = false; } + + if (ar->hw.flags & ATH6KL_HW_FLAG_64BIT_RATES) { + ath6kl_band_2ghz.ht_cap.mcs.rx_mask[0] = 0xff; + ath6kl_band_5ghz.ht_cap.mcs.rx_mask[0] = 0xff; + ath6kl_band_2ghz.ht_cap.mcs.rx_mask[1] = 0xff; + ath6kl_band_5ghz.ht_cap.mcs.rx_mask[1] = 0xff; + } else { + ath6kl_band_2ghz.ht_cap.mcs.rx_mask[0] = 0xff; + ath6kl_band_5ghz.ht_cap.mcs.rx_mask[0] = 0xff; + } + if (band_2gig) wiphy->bands[IEEE80211_BAND_2GHZ] = &ath6kl_band_2ghz; if (band_5gig) diff --git a/drivers/net/wireless/ath/ath6kl/core.h b/drivers/net/wireless/ath/ath6kl/core.h index 991bd96f7cf..b1bc6bc69f2 100644 --- a/drivers/net/wireless/ath/ath6kl/core.h +++ b/drivers/net/wireless/ath/ath6kl/core.h @@ -127,6 +127,10 @@ struct ath6kl_fw_ie { u8 data[0]; }; +enum ath6kl_hw_flags { + ATH6KL_HW_FLAG_64BIT_RATES = BIT(0), +}; + #define ATH6KL_FW_API2_FILE "fw-2.bin" #define ATH6KL_FW_API3_FILE "fw-3.bin" @@ -702,6 +706,8 @@ struct ath6kl { u32 testscript_addr; enum wmi_phy_cap cap; + u32 flags; + struct ath6kl_hw_fw { const char *dir; const char *otp; diff --git a/drivers/net/wireless/ath/ath6kl/init.c b/drivers/net/wireless/ath/ath6kl/init.c index 241febcd7f7..daf24ee9d28 100644 --- a/drivers/net/wireless/ath/ath6kl/init.c +++ b/drivers/net/wireless/ath/ath6kl/init.c @@ -42,6 +42,7 @@ static const struct ath6kl_hw hw_list[] = { .reserved_ram_size = 6912, .refclk_hz = 26000000, .uarttx_pin = 8, + .flags = 0, /* hw2.0 needs override address hardcoded */ .app_start_override_addr = 0x944C00, @@ -67,6 +68,7 @@ static const struct ath6kl_hw hw_list[] = { .refclk_hz = 26000000, .uarttx_pin = 8, .testscript_addr = 0x57ef74, + .flags = 0, .fw = { .dir = AR6003_HW_2_1_1_FW_DIR, @@ -91,6 +93,7 @@ static const struct ath6kl_hw hw_list[] = { .board_addr = 0x433900, .refclk_hz = 26000000, .uarttx_pin = 11, + .flags = ATH6KL_HW_FLAG_64BIT_RATES, .fw = { .dir = AR6004_HW_1_0_FW_DIR, @@ -110,6 +113,7 @@ static const struct ath6kl_hw hw_list[] = { .board_addr = 0x43d400, .refclk_hz = 40000000, .uarttx_pin = 11, + .flags = ATH6KL_HW_FLAG_64BIT_RATES, .fw = { .dir = AR6004_HW_1_1_FW_DIR, @@ -129,6 +133,7 @@ static const struct ath6kl_hw hw_list[] = { .board_addr = 0x435c00, .refclk_hz = 40000000, .uarttx_pin = 11, + .flags = ATH6KL_HW_FLAG_64BIT_RATES, .fw = { .dir = AR6004_HW_1_2_FW_DIR, diff --git a/drivers/net/wireless/ath/ath6kl/wmi.c b/drivers/net/wireless/ath/ath6kl/wmi.c index 6ad762daa42..63dc4fd73c4 100644 --- a/drivers/net/wireless/ath/ath6kl/wmi.c +++ b/drivers/net/wireless/ath/ath6kl/wmi.c @@ -2599,6 +2599,115 @@ static void ath6kl_wmi_relinquish_implicit_pstream_credits(struct wmi *wmi) spin_unlock_bh(&wmi->lock); } +static int ath6kl_set_bitrate_mask64(struct wmi *wmi, u8 if_idx, + const struct cfg80211_bitrate_mask *mask) +{ + struct sk_buff *skb; + int ret, mode, band; + u64 mcsrate, ratemask[IEEE80211_NUM_BANDS]; + struct wmi_set_tx_select_rates64_cmd *cmd; + + memset(&ratemask, 0, sizeof(ratemask)); + for (band = 0; band < IEEE80211_NUM_BANDS; band++) { + /* copy legacy rate mask */ + ratemask[band] = mask->control[band].legacy; + if (band == IEEE80211_BAND_5GHZ) + ratemask[band] = + mask->control[band].legacy << 4; + + /* copy mcs rate mask */ + mcsrate = mask->control[band].mcs[1]; + mcsrate <<= 8; + mcsrate |= mask->control[band].mcs[0]; + ratemask[band] |= mcsrate << 12; + ratemask[band] |= mcsrate << 28; + } + + ath6kl_dbg(ATH6KL_DBG_WMI, + "Ratemask 64 bit: 2.4:%llx 5:%llx\n", + ratemask[0], ratemask[1]); + + skb = ath6kl_wmi_get_new_buf(sizeof(*cmd) * WMI_RATES_MODE_MAX); + if (!skb) + return -ENOMEM; + + cmd = (struct wmi_set_tx_select_rates64_cmd *) skb->data; + for (mode = 0; mode < WMI_RATES_MODE_MAX; mode++) { + /* A mode operate in 5GHZ band */ + if (mode == WMI_RATES_MODE_11A || + mode == WMI_RATES_MODE_11A_HT20 || + mode == WMI_RATES_MODE_11A_HT40) + band = IEEE80211_BAND_5GHZ; + else + band = IEEE80211_BAND_2GHZ; + cmd->ratemask[mode] = cpu_to_le64(ratemask[band]); + } + + ret = ath6kl_wmi_cmd_send(wmi, if_idx, skb, + WMI_SET_TX_SELECT_RATES_CMDID, + NO_SYNC_WMIFLAG); + return ret; +} + +static int ath6kl_set_bitrate_mask32(struct wmi *wmi, u8 if_idx, + const struct cfg80211_bitrate_mask *mask) +{ + struct sk_buff *skb; + int ret, mode, band; + u32 mcsrate, ratemask[IEEE80211_NUM_BANDS]; + struct wmi_set_tx_select_rates32_cmd *cmd; + + memset(&ratemask, 0, sizeof(ratemask)); + for (band = 0; band < IEEE80211_NUM_BANDS; band++) { + /* copy legacy rate mask */ + ratemask[band] = mask->control[band].legacy; + if (band == IEEE80211_BAND_5GHZ) + ratemask[band] = + mask->control[band].legacy << 4; + + /* copy mcs rate mask */ + mcsrate = mask->control[band].mcs[0]; + ratemask[band] |= mcsrate << 12; + ratemask[band] |= mcsrate << 20; + } + + ath6kl_dbg(ATH6KL_DBG_WMI, + "Ratemask 32 bit: 2.4:%x 5:%x\n", + ratemask[0], ratemask[1]); + + skb = ath6kl_wmi_get_new_buf(sizeof(*cmd) * WMI_RATES_MODE_MAX); + if (!skb) + return -ENOMEM; + + cmd = (struct wmi_set_tx_select_rates32_cmd *) skb->data; + for (mode = 0; mode < WMI_RATES_MODE_MAX; mode++) { + /* A mode operate in 5GHZ band */ + if (mode == WMI_RATES_MODE_11A || + mode == WMI_RATES_MODE_11A_HT20 || + mode == WMI_RATES_MODE_11A_HT40) + band = IEEE80211_BAND_5GHZ; + else + band = IEEE80211_BAND_2GHZ; + cmd->ratemask[mode] = cpu_to_le32(ratemask[band]); + } + + ret = ath6kl_wmi_cmd_send(wmi, if_idx, skb, + WMI_SET_TX_SELECT_RATES_CMDID, + NO_SYNC_WMIFLAG); + return ret; +} + +int ath6kl_wmi_set_bitrate_mask(struct wmi *wmi, u8 if_idx, + const struct cfg80211_bitrate_mask *mask) +{ + struct ath6kl *ar = wmi->parent_dev; + + if (ar->hw.flags & ATH6KL_HW_FLAG_64BIT_RATES) + return ath6kl_set_bitrate_mask64(wmi, if_idx, mask); + else + return ath6kl_set_bitrate_mask32(wmi, if_idx, mask); +} + int ath6kl_wmi_set_host_sleep_mode_cmd(struct wmi *wmi, u8 if_idx, enum ath6kl_host_mode host_mode) { diff --git a/drivers/net/wireless/ath/ath6kl/wmi.h b/drivers/net/wireless/ath/ath6kl/wmi.h index 47756795a26..7c94fe3e9e6 100644 --- a/drivers/net/wireless/ath/ath6kl/wmi.h +++ b/drivers/net/wireless/ath/ath6kl/wmi.h @@ -1063,6 +1063,36 @@ struct wmi_power_params_cmd { __le16 ps_fail_event_policy; } __packed; +/* + * Ratemask for below modes should be passed + * to WMI_SET_TX_SELECT_RATES_CMDID. + * AR6003 has 32 bit mask for each modes. + * First 12 bits for legacy rates, 13 to 20 + * bits for HT 20 rates and 21 to 28 bits for + * HT 40 rates + */ +enum wmi_mode_phy { + WMI_RATES_MODE_11A = 0, + WMI_RATES_MODE_11G, + WMI_RATES_MODE_11B, + WMI_RATES_MODE_11GONLY, + WMI_RATES_MODE_11A_HT20, + WMI_RATES_MODE_11G_HT20, + WMI_RATES_MODE_11A_HT40, + WMI_RATES_MODE_11G_HT40, + WMI_RATES_MODE_MAX +}; + +/* WMI_SET_TX_SELECT_RATES_CMDID */ +struct wmi_set_tx_select_rates32_cmd { + __le32 ratemask[WMI_RATES_MODE_MAX]; +} __packed; + +/* WMI_SET_TX_SELECT_RATES_CMDID */ +struct wmi_set_tx_select_rates64_cmd { + __le64 ratemask[WMI_RATES_MODE_MAX]; +} __packed; + /* WMI_SET_DISC_TIMEOUT_CMDID */ struct wmi_disc_timeout_cmd { /* seconds */ @@ -2547,6 +2577,8 @@ int ath6kl_wmi_set_ip_cmd(struct wmi *wmi, u8 if_idx, __be32 ips0, __be32 ips1); int ath6kl_wmi_set_host_sleep_mode_cmd(struct wmi *wmi, u8 if_idx, enum ath6kl_host_mode host_mode); +int ath6kl_wmi_set_bitrate_mask(struct wmi *wmi, u8 if_idx, + const struct cfg80211_bitrate_mask *mask); int ath6kl_wmi_set_wow_mode_cmd(struct wmi *wmi, u8 if_idx, enum ath6kl_wow_mode wow_mode, u32 filter, u16 host_req_delay); -- cgit v1.2.3-70-g09d2 From 824174c3b5a962ff706738e36317451a2343355c Mon Sep 17 00:00:00 2001 From: Raja Mani Date: Mon, 28 May 2012 11:51:12 +0530 Subject: ath6kl: Remove unneeded memset in roam related config func No need to clear requested memory after allocating new SKB with help of ath6kl_wmi_get_new_buf(). This clear part is already taken care in ath6kl_wmi_get_new_buf(). Found this on code review. Signed-off-by: Raja Mani Signed-off-by: Kalle Valo --- drivers/net/wireless/ath/ath6kl/wmi.c | 2 -- 1 file changed, 2 deletions(-) (limited to 'drivers/net/wireless/ath/ath6kl/wmi.c') diff --git a/drivers/net/wireless/ath/ath6kl/wmi.c b/drivers/net/wireless/ath/ath6kl/wmi.c index 63dc4fd73c4..43bce9c8a86 100644 --- a/drivers/net/wireless/ath/ath6kl/wmi.c +++ b/drivers/net/wireless/ath/ath6kl/wmi.c @@ -743,7 +743,6 @@ int ath6kl_wmi_force_roam_cmd(struct wmi *wmi, const u8 *bssid) return -ENOMEM; cmd = (struct roam_ctrl_cmd *) skb->data; - memset(cmd, 0, sizeof(*cmd)); memcpy(cmd->info.bssid, bssid, ETH_ALEN); cmd->roam_ctrl = WMI_FORCE_ROAM; @@ -763,7 +762,6 @@ int ath6kl_wmi_set_roam_mode_cmd(struct wmi *wmi, enum wmi_roam_mode mode) return -ENOMEM; cmd = (struct roam_ctrl_cmd *) skb->data; - memset(cmd, 0, sizeof(*cmd)); cmd->info.roam_mode = mode; cmd->roam_ctrl = WMI_SET_ROAM_MODE; -- cgit v1.2.3-70-g09d2 From d154f32ebe3ffe9dea6ed0a91767883b1e7a6bc0 Mon Sep 17 00:00:00 2001 From: Etay Luz Date: Wed, 30 May 2012 11:35:08 +0300 Subject: ath6kl: support changing dtim period on AP mode This patch adds support for dtim_period configuration in beacon. kvalo: add a comment about ignoring the error, use vif_idx, add \n to the warning message Signed-off-by: Etay Luz Signed-off-by: Kalle Valo --- drivers/net/wireless/ath/ath6kl/cfg80211.c | 8 +++++++- drivers/net/wireless/ath/ath6kl/wmi.c | 16 ++++++++++++++++ drivers/net/wireless/ath/ath6kl/wmi.h | 5 +++++ 3 files changed, 28 insertions(+), 1 deletion(-) (limited to 'drivers/net/wireless/ath/ath6kl/wmi.c') diff --git a/drivers/net/wireless/ath/ath6kl/cfg80211.c b/drivers/net/wireless/ath/ath6kl/cfg80211.c index d2129030fd7..f00d377343d 100644 --- a/drivers/net/wireless/ath/ath6kl/cfg80211.c +++ b/drivers/net/wireless/ath/ath6kl/cfg80211.c @@ -2783,9 +2783,15 @@ static int ath6kl_start_ap(struct wiphy *wiphy, struct net_device *dev, /* TODO: * info->interval - * info->dtim_period */ + ret = ath6kl_wmi_ap_set_dtim_cmd(ar->wmi, vif->fw_vif_idx, + info->dtim_period); + + /* ignore error, just print a warning and continue normally */ + if (ret) + ath6kl_warn("Failed to set dtim_period in beacon: %d\n", ret); + if (info->beacon.head == NULL) return -EINVAL; mgmt = (struct ieee80211_mgmt *) info->beacon.head; diff --git a/drivers/net/wireless/ath/ath6kl/wmi.c b/drivers/net/wireless/ath/ath6kl/wmi.c index 43bce9c8a86..a6caa673e8a 100644 --- a/drivers/net/wireless/ath/ath6kl/wmi.c +++ b/drivers/net/wireless/ath/ath6kl/wmi.c @@ -752,6 +752,22 @@ int ath6kl_wmi_force_roam_cmd(struct wmi *wmi, const u8 *bssid) NO_SYNC_WMIFLAG); } +int ath6kl_wmi_ap_set_dtim_cmd(struct wmi *wmi, u8 if_idx, u32 dtim_period) +{ + struct sk_buff *skb; + struct set_dtim_cmd *cmd; + + skb = ath6kl_wmi_get_new_buf(sizeof(*cmd)); + if (!skb) + return -ENOMEM; + + cmd = (struct set_dtim_cmd *) skb->data; + + cmd->dtim_period = cpu_to_le32(dtim_period); + return ath6kl_wmi_cmd_send(wmi, if_idx, skb, + WMI_AP_SET_DTIM_CMDID, NO_SYNC_WMIFLAG); +} + int ath6kl_wmi_set_roam_mode_cmd(struct wmi *wmi, enum wmi_roam_mode mode) { struct sk_buff *skb; diff --git a/drivers/net/wireless/ath/ath6kl/wmi.h b/drivers/net/wireless/ath/ath6kl/wmi.h index 7c94fe3e9e6..43339aca585 100644 --- a/drivers/net/wireless/ath/ath6kl/wmi.h +++ b/drivers/net/wireless/ath/ath6kl/wmi.h @@ -1617,6 +1617,10 @@ struct roam_ctrl_cmd { u8 roam_ctrl; } __packed; +struct set_dtim_cmd { + __le32 dtim_period; +} __packed; + /* BSS INFO HDR version 2.0 */ struct wmi_bss_info_hdr2 { __le16 ch; /* frequency in MHz */ @@ -2589,6 +2593,7 @@ int ath6kl_wmi_add_wow_pattern_cmd(struct wmi *wmi, u8 if_idx, int ath6kl_wmi_del_wow_pattern_cmd(struct wmi *wmi, u8 if_idx, u16 list_id, u16 filter_id); int ath6kl_wmi_set_roam_lrssi_cmd(struct wmi *wmi, u8 lrssi); +int ath6kl_wmi_ap_set_dtim_cmd(struct wmi *wmi, u8 if_idx, u32 dtim_period); int ath6kl_wmi_force_roam_cmd(struct wmi *wmi, const u8 *bssid); int ath6kl_wmi_set_roam_mode_cmd(struct wmi *wmi, enum wmi_roam_mode mode); int ath6kl_wmi_mcast_filter_cmd(struct wmi *wmi, u8 if_idx, bool mc_all_on); -- cgit v1.2.3-70-g09d2