From 2f6fc351e6e8c1b6a95140e733607e32bc3a4322 Mon Sep 17 00:00:00 2001 From: Rajkumar Manoharan Date: Thu, 28 Apr 2011 15:31:57 +0530 Subject: ath9k: Fix drain txq failure in flush While draining the txq in flush, the buffers can be added into the tx queue by tx_tasklet which leads to unneccesary chip reset. This issue was originially found with AR9382 and running heavy uplink udp traffic with higher bandwidth and doing frequent bgscan. Cc: stable@kernel.org Signed-off-by: Vasanthakumar Thiagarajan Signed-off-by: Rajkumar Manoharan Signed-off-by: John W. Linville --- drivers/net/wireless/ath/ath9k/main.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) (limited to 'drivers/net/wireless/ath') diff --git a/drivers/net/wireless/ath/ath9k/main.c b/drivers/net/wireless/ath/ath9k/main.c index c3dbf2661a3..efdafd28fab 100644 --- a/drivers/net/wireless/ath/ath9k/main.c +++ b/drivers/net/wireless/ath/ath9k/main.c @@ -2261,6 +2261,7 @@ static void ath9k_flush(struct ieee80211_hw *hw, bool drop) struct ath_softc *sc = hw->priv; int timeout = 200; /* ms */ int i, j; + bool drain_txq; mutex_lock(&sc->mutex); cancel_delayed_work_sync(&sc->tx_complete_work); @@ -2286,7 +2287,10 @@ static void ath9k_flush(struct ieee80211_hw *hw, bool drop) } ath9k_ps_wakeup(sc); - if (!ath_drain_all_txq(sc, false)) + spin_lock_bh(&sc->sc_pcu_lock); + drain_txq = ath_drain_all_txq(sc, false); + spin_unlock_bh(&sc->sc_pcu_lock); + if (!drain_txq) ath_reset(sc, false); ath9k_ps_restore(sc); ieee80211_wake_queues(hw); -- cgit v1.2.3-70-g09d2 From cbe8c735f1af88037c3dab570f816e3a77896cc7 Mon Sep 17 00:00:00 2001 From: Mohammed Shafi Shajakhan Date: Tue, 3 May 2011 13:14:06 +0530 Subject: ath9k_hw: remove aggregation protection mode when aggregation protection mode is enabled the hardware needs to send RTS/CTS for each HT frame. Currently its disabled so remove the unused call backs. Signed-off-by: Mohammed Shafi Shajakhan Signed-off-by: John W. Linville --- drivers/net/wireless/ath/ath9k/ar9002_mac.c | 10 ---------- drivers/net/wireless/ath/ath9k/ar9003_mac.c | 11 ----------- drivers/net/wireless/ath/ath9k/ath9k.h | 1 - drivers/net/wireless/ath/ath9k/hw-ops.h | 6 ------ drivers/net/wireless/ath/ath9k/hw.h | 2 -- drivers/net/wireless/ath/ath9k/main.c | 3 --- drivers/net/wireless/ath/ath9k/xmit.c | 5 +---- 7 files changed, 1 insertion(+), 37 deletions(-) (limited to 'drivers/net/wireless/ath') diff --git a/drivers/net/wireless/ath/ath9k/ar9002_mac.c b/drivers/net/wireless/ath/ath9k/ar9002_mac.c index c338efbccf4..7a332f16b79 100644 --- a/drivers/net/wireless/ath/ath9k/ar9002_mac.c +++ b/drivers/net/wireless/ath/ath9k/ar9002_mac.c @@ -415,15 +415,6 @@ static void ar9002_hw_clr11n_aggr(struct ath_hw *ah, void *ds) ads->ds_ctl1 &= (~AR_IsAggr & ~AR_MoreAggr); } -static void ar9002_hw_set11n_burstduration(struct ath_hw *ah, void *ds, - u32 burstDuration) -{ - struct ar5416_desc *ads = AR5416DESC(ds); - - ads->ds_ctl2 &= ~AR_BurstDur; - ads->ds_ctl2 |= SM(burstDuration, AR_BurstDur); -} - void ath9k_hw_setuprxdesc(struct ath_hw *ah, struct ath_desc *ds, u32 size, u32 flags) { @@ -456,6 +447,5 @@ void ar9002_hw_attach_mac_ops(struct ath_hw *ah) ops->set11n_aggr_middle = ar9002_hw_set11n_aggr_middle; ops->set11n_aggr_last = ar9002_hw_set11n_aggr_last; ops->clr11n_aggr = ar9002_hw_clr11n_aggr; - ops->set11n_burstduration = ar9002_hw_set11n_burstduration; ops->set_clrdmask = ar9002_hw_set_clrdmask; } diff --git a/drivers/net/wireless/ath/ath9k/ar9003_mac.c b/drivers/net/wireless/ath/ath9k/ar9003_mac.c index c1264d60c49..be6adec33dd 100644 --- a/drivers/net/wireless/ath/ath9k/ar9003_mac.c +++ b/drivers/net/wireless/ath/ath9k/ar9003_mac.c @@ -484,16 +484,6 @@ static void ar9003_hw_clr11n_aggr(struct ath_hw *ah, void *ds) ads->ctl12 &= (~AR_IsAggr & ~AR_MoreAggr); } -static void ar9003_hw_set11n_burstduration(struct ath_hw *ah, void *ds, - u32 burstDuration) -{ - struct ar9003_txc *ads = (struct ar9003_txc *) ds; - - ads->ctl13 &= ~AR_BurstDur; - ads->ctl13 |= SM(burstDuration, AR_BurstDur); - -} - void ar9003_hw_set_paprd_txdesc(struct ath_hw *ah, void *ds, u8 chains) { struct ar9003_txc *ads = ds; @@ -518,7 +508,6 @@ void ar9003_hw_attach_mac_ops(struct ath_hw *hw) ops->set11n_aggr_middle = ar9003_hw_set11n_aggr_middle; ops->set11n_aggr_last = ar9003_hw_set11n_aggr_last; ops->clr11n_aggr = ar9003_hw_clr11n_aggr; - ops->set11n_burstduration = ar9003_hw_set11n_burstduration; ops->set_clrdmask = ar9003_hw_set_clrdmask; } diff --git a/drivers/net/wireless/ath/ath9k/ath9k.h b/drivers/net/wireless/ath/ath9k/ath9k.h index 0312aa09180..1bffd156b15 100644 --- a/drivers/net/wireless/ath/ath9k/ath9k.h +++ b/drivers/net/wireless/ath/ath9k/ath9k.h @@ -62,7 +62,6 @@ struct ath_node; #define ATH_TXQ_SETUP(sc, i) ((sc)->tx.txqsetup & (1<clr11n_aggr(ah, ds); } -static inline void ath9k_hw_set11n_burstduration(struct ath_hw *ah, void *ds, - u32 burstDuration) -{ - ath9k_hw_ops(ah)->set11n_burstduration(ah, ds, burstDuration); -} - static inline void ath9k_hw_set_clrdmask(struct ath_hw *ah, void *ds, bool val) { ath9k_hw_ops(ah)->set_clrdmask(ah, ds, val); diff --git a/drivers/net/wireless/ath/ath9k/hw.h b/drivers/net/wireless/ath/ath9k/hw.h index 34ed1bd0e85..b2248bba25a 100644 --- a/drivers/net/wireless/ath/ath9k/hw.h +++ b/drivers/net/wireless/ath/ath9k/hw.h @@ -628,8 +628,6 @@ struct ath_hw_ops { u32 numDelims); void (*set11n_aggr_last)(struct ath_hw *ah, void *ds); void (*clr11n_aggr)(struct ath_hw *ah, void *ds); - void (*set11n_burstduration)(struct ath_hw *ah, void *ds, - u32 burstDuration); void (*set_clrdmask)(struct ath_hw *ah, void *ds, bool val); }; diff --git a/drivers/net/wireless/ath/ath9k/main.c b/drivers/net/wireless/ath/ath9k/main.c index efdafd28fab..3de115df916 100644 --- a/drivers/net/wireless/ath/ath9k/main.c +++ b/drivers/net/wireless/ath/ath9k/main.c @@ -2039,9 +2039,6 @@ static void ath9k_bss_info_changed(struct ieee80211_hw *hw, if (changed & BSS_CHANGED_BSSID) { ath9k_config_bss(sc, vif); - /* Set aggregation protection mode parameters */ - sc->config.ath_aggr_prot = 0; - ath_dbg(common, ATH_DBG_CONFIG, "BSSID: %pM aid: 0x%x\n", common->curbssid, common->curaid); } diff --git a/drivers/net/wireless/ath/ath9k/xmit.c b/drivers/net/wireless/ath/ath9k/xmit.c index 55960fa70dc..947d5b3b6e0 100644 --- a/drivers/net/wireless/ath/ath9k/xmit.c +++ b/drivers/net/wireless/ath/ath9k/xmit.c @@ -1663,8 +1663,7 @@ static void ath_buf_set_rate(struct ath_softc *sc, struct ath_buf *bf, int len) rix = rates[i].idx; series[i].Tries = rates[i].count; - if ((sc->config.ath_aggr_prot && bf_isaggr(bf)) || - (rates[i].flags & IEEE80211_TX_RC_USE_RTS_CTS)) { + if (rates[i].flags & IEEE80211_TX_RC_USE_RTS_CTS) { series[i].RateFlags |= ATH9K_RATESERIES_RTS_CTS; flags |= ATH9K_TXDESC_RTSENA; } else if (rates[i].flags & IEEE80211_TX_RC_USE_CTS_PROTECT) { @@ -1733,8 +1732,6 @@ static void ath_buf_set_rate(struct ath_softc *sc, struct ath_buf *bf, int len) !is_pspoll, ctsrate, 0, series, 4, flags); - if (sc->config.ath_aggr_prot && flags) - ath9k_hw_set11n_burstduration(sc->sc_ah, bf->bf_desc, 8192); } static struct ath_buf *ath_tx_setup_buffer(struct ieee80211_hw *hw, -- cgit v1.2.3-70-g09d2 From 8f7f3b2fcc4ccbba0be776049df41a2f96c986ac Mon Sep 17 00:00:00 2001 From: Nicolas Cavallari Date: Wed, 4 May 2011 15:26:52 +0200 Subject: carl9170: fix allmulticast mode Currently, the driver only disable multicast filtering when the FIF_ALLMULTI driver flag has been just set (ie, if changed_flags& FIF_ALLMULTI and *new_flags& FIF_ALLMULTI) or else it will reenable multicast filtering. But next time, this condition will be false and multicast filtering will be reenabled, even through FIF_ALLMULTI is still set. This mean that allmulticast only works for less than two minutes in ad-hoc mode. This patch fixes that to disable multicast filtering as long as FIF_ALLMULTI is set. Signed-off-by: Nicolas Cavallari Acked-by: Christian Lamparter Signed-off-by: John W. Linville --- drivers/net/wireless/ath/carl9170/main.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/net/wireless/ath') diff --git a/drivers/net/wireless/ath/carl9170/main.c b/drivers/net/wireless/ath/carl9170/main.c index 1638468be5a..7d5c65ea94e 100644 --- a/drivers/net/wireless/ath/carl9170/main.c +++ b/drivers/net/wireless/ath/carl9170/main.c @@ -883,7 +883,7 @@ static void carl9170_op_configure_filter(struct ieee80211_hw *hw, * then checking the error flags, later. */ - if (changed_flags & FIF_ALLMULTI && *new_flags & FIF_ALLMULTI) + if (*new_flags & FIF_ALLMULTI) multicast = ~0ULL; if (multicast != ar->cur_mc_hash) -- cgit v1.2.3-70-g09d2 From 28ef6450f0182f95c4f50aaa0ab2043a09c72b0a Mon Sep 17 00:00:00 2001 From: Rajkumar Manoharan Date: Wed, 4 May 2011 19:37:17 +0530 Subject: ath9k_hw: do noise floor calibration only on required chains At present the noise floor calibration is processed in supported control and extension chains rather than required chains. Unnccesarily doing nfcal in all supported chains leads to invalid nf readings on extn chains and these invalid values got updated into history buffer. While loading those values from history buffer is moving the chip to deaf state. This issue was observed in AR9002/AR9003 chips while doing associate/dissociate in HT40 mode and interface up/down in iterative manner. After some iterations, the chip was moved to deaf state. Somehow the pci devices are recovered by poll work after chip reset. Raading the nf values in all supported extension chains when the hw is not yet configured in HT40 mode results invalid values. Cc: stable@kernel.org Signed-off-by: Rajkumar Manoharan Signed-off-by: John W. Linville --- drivers/net/wireless/ath/ath9k/calib.c | 13 +++++++++++++ 1 file changed, 13 insertions(+) (limited to 'drivers/net/wireless/ath') diff --git a/drivers/net/wireless/ath/ath9k/calib.c b/drivers/net/wireless/ath/ath9k/calib.c index 8649581fa4d..fe3c10e6b27 100644 --- a/drivers/net/wireless/ath/ath9k/calib.c +++ b/drivers/net/wireless/ath/ath9k/calib.c @@ -69,15 +69,21 @@ static void ath9k_hw_update_nfcal_hist_buffer(struct ath_hw *ah, int16_t *nfarray) { struct ath_common *common = ath9k_hw_common(ah); + struct ieee80211_conf *conf = &common->hw->conf; struct ath_nf_limits *limit; struct ath9k_nfcal_hist *h; bool high_nf_mid = false; + u8 chainmask = (ah->rxchainmask << 3) | ah->rxchainmask; int i; h = cal->nfCalHist; limit = ath9k_hw_get_nf_limits(ah, ah->curchan); for (i = 0; i < NUM_NF_READINGS; i++) { + if (!(chainmask & (1 << i)) || + ((i >= AR5416_MAX_CHAINS) && !conf_is_ht40(conf))) + continue; + h[i].nfCalBuffer[h[i].currIndex] = nfarray[i]; if (++h[i].currIndex >= ATH9K_NF_CAL_HIST_MAX) @@ -225,6 +231,7 @@ void ath9k_hw_loadnf(struct ath_hw *ah, struct ath9k_channel *chan) int32_t val; u8 chainmask = (ah->rxchainmask << 3) | ah->rxchainmask; struct ath_common *common = ath9k_hw_common(ah); + struct ieee80211_conf *conf = &common->hw->conf; s16 default_nf = ath9k_hw_get_default_nf(ah, chan); if (ah->caldata) @@ -234,6 +241,9 @@ void ath9k_hw_loadnf(struct ath_hw *ah, struct ath9k_channel *chan) if (chainmask & (1 << i)) { s16 nfval; + if ((i >= AR5416_MAX_CHAINS) && !conf_is_ht40(conf)) + continue; + if (h) nfval = h[i].privNF; else @@ -293,6 +303,9 @@ void ath9k_hw_loadnf(struct ath_hw *ah, struct ath9k_channel *chan) ENABLE_REGWRITE_BUFFER(ah); for (i = 0; i < NUM_NF_READINGS; i++) { if (chainmask & (1 << i)) { + if ((i >= AR5416_MAX_CHAINS) && !conf_is_ht40(conf)) + continue; + val = REG_READ(ah, ah->nf_regs[i]); val &= 0xFFFFFE00; val |= (((u32) (-50) << 1) & 0x1ff); -- cgit v1.2.3-70-g09d2 From cf3a03b9c99a0b2715741d116f50f513f545bb2d Mon Sep 17 00:00:00 2001 From: "Luis R. Rodriguez" Date: Wed, 4 May 2011 14:01:26 -0700 Subject: ath9k_hw: fix power for the HT40 duplicate frames With AR9003 at about ~ 10 feet from an AP that uses RTS / CTS you will be able to associate but not not get data through given that the power for the rates used was set too low. This increases the power and permits data connectivity at longer distances from access points when connected with HT40. Without this you will not get any data through when associated to APs configured in HT40 at about more than 10 feet away. Cc: stable@kernel.org Cc: Fiona Cain Cc: Zhen Xie Cc: Kathy Giori Cc: Neha Choksi Cc: Wayne Daniel Cc: Gaurav Jauhar Cc: Samira Naraghi CC: Ashok Chennupati Cc: Lance Zimmerman Signed-off-by: Luis R. Rodriguez Signed-off-by: John W. Linville --- drivers/net/wireless/ath/ath9k/ar9003_eeprom.c | 10 ++++++++++ 1 file changed, 10 insertions(+) (limited to 'drivers/net/wireless/ath') diff --git a/drivers/net/wireless/ath/ath9k/ar9003_eeprom.c b/drivers/net/wireless/ath/ath9k/ar9003_eeprom.c index 97f970c5e4e..a9dd3a4b4af 100644 --- a/drivers/net/wireless/ath/ath9k/ar9003_eeprom.c +++ b/drivers/net/wireless/ath/ath9k/ar9003_eeprom.c @@ -4005,6 +4005,16 @@ static int ar9003_hw_tx_power_regwrite(struct ath_hw *ah, u8 * pPwrArray) POW_SM(pPwrArray[ALL_TARGET_LEGACY_1L_5L], 0) ); + /* Write the power for duplicated frames - HT40 */ + + /* dup40_cck (LSB), dup40_ofdm, ext20_cck, ext20_ofdm (MSB) */ + REG_WRITE(ah, 0xa3e0, + POW_SM(pPwrArray[ALL_TARGET_LEGACY_6_24], 24) | + POW_SM(pPwrArray[ALL_TARGET_LEGACY_1L_5L], 16) | + POW_SM(pPwrArray[ALL_TARGET_LEGACY_6_24], 8) | + POW_SM(pPwrArray[ALL_TARGET_LEGACY_1L_5L], 0) + ); + /* Write the HT20 power per rate set */ /* 0/8/16 (LSB), 1-3/9-11/17-19, 4, 5 (MSB) */ -- cgit v1.2.3-70-g09d2 From deb751880af6f2dce6cdc232a7b023f2b58cd815 Mon Sep 17 00:00:00 2001 From: Rajkumar Manoharan Date: Fri, 6 May 2011 18:27:46 +0530 Subject: ath9k: avoid enabling interrupts while processing rx The assumsion is that while processing ath9k tasklet, interrupts were already disabled and it will be enabled at the completion of ath9k tasklet. But whenever TSFOOR is raised, the driver configures the beacon timers after having received a beacon frame from the AP which inturn enables the interrupts. Cc: stable@kernel.org Signed-off-by: Rajkumar Manoharan Signed-off-by: John W. Linville --- drivers/net/wireless/ath/ath9k/ath9k.h | 1 + drivers/net/wireless/ath/ath9k/beacon.c | 15 +++++++++++++-- drivers/net/wireless/ath/ath9k/main.c | 3 ++- drivers/net/wireless/ath/ath9k/recv.c | 1 + 4 files changed, 17 insertions(+), 3 deletions(-) (limited to 'drivers/net/wireless/ath') diff --git a/drivers/net/wireless/ath/ath9k/ath9k.h b/drivers/net/wireless/ath/ath9k/ath9k.h index 1bffd156b15..f2f672bc596 100644 --- a/drivers/net/wireless/ath/ath9k/ath9k.h +++ b/drivers/net/wireless/ath/ath9k/ath9k.h @@ -564,6 +564,7 @@ struct ath_ant_comb { #define PS_WAIT_FOR_PSPOLL_DATA BIT(2) #define PS_WAIT_FOR_TX_ACK BIT(3) #define PS_BEACON_SYNC BIT(4) +#define PS_TSFOOR_SYNC BIT(5) struct ath_rate_table; diff --git a/drivers/net/wireless/ath/ath9k/beacon.c b/drivers/net/wireless/ath/ath9k/beacon.c index 22cd241a098..637dbc5f7b6 100644 --- a/drivers/net/wireless/ath/ath9k/beacon.c +++ b/drivers/net/wireless/ath/ath9k/beacon.c @@ -620,7 +620,13 @@ static void ath_beacon_config_sta(struct ath_softc *sc, ath9k_hw_disable_interrupts(ah); ath9k_hw_set_sta_beacon_timers(ah, &bs); ah->imask |= ATH9K_INT_BMISS; - ath9k_hw_set_interrupts(ah, ah->imask); + + /* + * If the beacon config is called beacause of TSFOOR, + * Interrupts will be enabled back at the end of ath9k_tasklet + */ + if (!(sc->ps_flags & PS_TSFOOR_SYNC)) + ath9k_hw_set_interrupts(ah, ah->imask); } static void ath_beacon_config_adhoc(struct ath_softc *sc, @@ -661,7 +667,12 @@ static void ath_beacon_config_adhoc(struct ath_softc *sc, ath9k_hw_disable_interrupts(ah); ath9k_beacon_init(sc, nexttbtt, intval); sc->beacon.bmisscnt = 0; - ath9k_hw_set_interrupts(ah, ah->imask); + /* + * If the beacon config is called beacause of TSFOOR, + * Interrupts will be enabled back at the end of ath9k_tasklet + */ + if (!(sc->ps_flags & PS_TSFOOR_SYNC)) + ath9k_hw_set_interrupts(ah, ah->imask); } static bool ath9k_allow_beacon_config(struct ath_softc *sc, diff --git a/drivers/net/wireless/ath/ath9k/main.c b/drivers/net/wireless/ath/ath9k/main.c index 3de115df916..c171d111ecf 100644 --- a/drivers/net/wireless/ath/ath9k/main.c +++ b/drivers/net/wireless/ath/ath9k/main.c @@ -718,7 +718,8 @@ void ath9k_tasklet(unsigned long data) */ ath_dbg(common, ATH_DBG_PS, "TSFOOR - Sync with next Beacon\n"); - sc->ps_flags |= PS_WAIT_FOR_BEACON | PS_BEACON_SYNC; + sc->ps_flags |= PS_WAIT_FOR_BEACON | PS_BEACON_SYNC | + PS_TSFOOR_SYNC; } if (ah->btcoex_hw.scheme == ATH_BTCOEX_CFG_3WIRE) diff --git a/drivers/net/wireless/ath/ath9k/recv.c b/drivers/net/wireless/ath/ath9k/recv.c index c5b7cbe59bf..a485c040bf8 100644 --- a/drivers/net/wireless/ath/ath9k/recv.c +++ b/drivers/net/wireless/ath/ath9k/recv.c @@ -572,6 +572,7 @@ static void ath_rx_ps_beacon(struct ath_softc *sc, struct sk_buff *skb) ath_dbg(common, ATH_DBG_PS, "Reconfigure Beacon timers based on timestamp from the AP\n"); ath_set_beacon(sc); + sc->ps_flags &= ~PS_TSFOOR_SYNC; } if (ath_beacon_dtim_pending_cab(skb)) { -- cgit v1.2.3-70-g09d2 From 4105f8075051b62816830c95de1ec17ceb364d09 Mon Sep 17 00:00:00 2001 From: Rajkumar Manoharan Date: Fri, 6 May 2011 18:27:47 +0530 Subject: ath9k: process TSF out of range before RX Processing TSF out of range before RX helps to update beacon timers so early in the succeeding rx process. Signed-off-by: Rajkumar Manoharan Signed-off-by: John W. Linville --- drivers/net/wireless/ath/ath9k/main.c | 22 +++++++++++----------- 1 file changed, 11 insertions(+), 11 deletions(-) (limited to 'drivers/net/wireless/ath') diff --git a/drivers/net/wireless/ath/ath9k/main.c b/drivers/net/wireless/ath/ath9k/main.c index c171d111ecf..11d9eca8fb6 100644 --- a/drivers/net/wireless/ath/ath9k/main.c +++ b/drivers/net/wireless/ath/ath9k/main.c @@ -689,6 +689,17 @@ void ath9k_tasklet(unsigned long data) !ath9k_hw_check_alive(ah)) ieee80211_queue_work(sc->hw, &sc->hw_check_work); + if ((status & ATH9K_INT_TSFOOR) && sc->ps_enabled) { + /* + * TSF sync does not look correct; remain awake to sync with + * the next Beacon. + */ + ath_dbg(common, ATH_DBG_PS, + "TSFOOR - Sync with next Beacon\n"); + sc->ps_flags |= PS_WAIT_FOR_BEACON | PS_BEACON_SYNC | + PS_TSFOOR_SYNC; + } + if (ah->caps.hw_caps & ATH9K_HW_CAP_EDMA) rxmask = (ATH9K_INT_RXHP | ATH9K_INT_RXLP | ATH9K_INT_RXEOL | ATH9K_INT_RXORN); @@ -711,17 +722,6 @@ void ath9k_tasklet(unsigned long data) ath_tx_tasklet(sc); } - if ((status & ATH9K_INT_TSFOOR) && sc->ps_enabled) { - /* - * TSF sync does not look correct; remain awake to sync with - * the next Beacon. - */ - ath_dbg(common, ATH_DBG_PS, - "TSFOOR - Sync with next Beacon\n"); - sc->ps_flags |= PS_WAIT_FOR_BEACON | PS_BEACON_SYNC | - PS_TSFOOR_SYNC; - } - if (ah->btcoex_hw.scheme == ATH_BTCOEX_CFG_3WIRE) if (status & ATH9K_INT_GENTIMER) ath_gen_timer_isr(sc->sc_ah); -- cgit v1.2.3-70-g09d2 From 6490e334bc3af960965adfcef5acf6e5cbdd925c Mon Sep 17 00:00:00 2001 From: Christian Lamparter Date: Sat, 7 May 2011 11:13:37 +0200 Subject: carl9170: fix -Wunused-but-set-variable warnings MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit tx.c: In function ‘carl9170_tx_accounting_free’: tx.c:159:28: warning: variable ‘txinfo’ set but not used tx.c: In function ‘carl9170_tx_status_process_ampdu’: tx.c:383:27: warning: variable ‘ar_info’ set but not used tx.c: In function ‘__carl9170_tx_process_status’: tx.c:626:27: warning: variable ‘arinfo’ set but not used tx.c: In function ‘carl9170_tx_ampdu_queue’: tx.c:1324:15: warning: variable ‘max’ set but not used Signed-off-by: Christian Lamparter Signed-off-by: John W. Linville --- drivers/net/wireless/ath/carl9170/tx.c | 9 --------- 1 file changed, 9 deletions(-) (limited to 'drivers/net/wireless/ath') diff --git a/drivers/net/wireless/ath/carl9170/tx.c b/drivers/net/wireless/ath/carl9170/tx.c index bf2eff9dd58..e94084fcf6f 100644 --- a/drivers/net/wireless/ath/carl9170/tx.c +++ b/drivers/net/wireless/ath/carl9170/tx.c @@ -156,10 +156,8 @@ out_rcu: static void carl9170_tx_accounting_free(struct ar9170 *ar, struct sk_buff *skb) { - struct ieee80211_tx_info *txinfo; int queue; - txinfo = IEEE80211_SKB_CB(skb); queue = skb_get_queue_mapping(skb); spin_lock_bh(&ar->tx_stats_lock); @@ -380,7 +378,6 @@ static void carl9170_tx_status_process_ampdu(struct ar9170 *ar, { struct _carl9170_tx_superframe *super = (void *) skb->data; struct ieee80211_hdr *hdr = (void *) super->frame_data; - struct carl9170_tx_info *ar_info; struct ieee80211_sta *sta; struct carl9170_sta_info *sta_info; struct carl9170_sta_tid *tid_info; @@ -391,8 +388,6 @@ static void carl9170_tx_status_process_ampdu(struct ar9170 *ar, (!(super->f.mac_control & cpu_to_le16(AR9170_TX_MAC_AGGR)))) return; - ar_info = (void *) txinfo->rate_driver_data; - rcu_read_lock(); sta = __carl9170_get_tx_sta(ar, skb); if (unlikely(!sta)) @@ -623,7 +618,6 @@ static void __carl9170_tx_process_status(struct ar9170 *ar, { struct sk_buff *skb; struct ieee80211_tx_info *txinfo; - struct carl9170_tx_info *arinfo; unsigned int r, t, q; bool success = true; @@ -639,7 +633,6 @@ static void __carl9170_tx_process_status(struct ar9170 *ar, } txinfo = IEEE80211_SKB_CB(skb); - arinfo = (void *) txinfo->rate_driver_data; if (!(info & CARL9170_TX_STATUS_SUCCESS)) success = false; @@ -1321,7 +1314,6 @@ static bool carl9170_tx_ampdu_queue(struct ar9170 *ar, struct carl9170_sta_info *sta_info; struct carl9170_sta_tid *agg; struct sk_buff *iter; - unsigned int max; u16 tid, seq, qseq, off; bool run = false; @@ -1331,7 +1323,6 @@ static bool carl9170_tx_ampdu_queue(struct ar9170 *ar, rcu_read_lock(); agg = rcu_dereference(sta_info->agg[tid]); - max = sta_info->ampdu_max_len; if (!agg) goto err_unlock_rcu; -- cgit v1.2.3-70-g09d2 From 8c12c7b0efce09b87e67d05332bdcb86ea83f65a Mon Sep 17 00:00:00 2001 From: Mohammed Shafi Shajakhan Date: Mon, 9 May 2011 10:29:01 +0530 Subject: ath9k_hw: remove get_channel_noise function currently ath9k_hw_getchan_noise is not used anywhere Signed-off-by: Mohammed Shafi Shajakhan Signed-off-by: John W. Linville --- drivers/net/wireless/ath/ath9k/calib.c | 8 -------- drivers/net/wireless/ath/ath9k/calib.h | 1 - 2 files changed, 9 deletions(-) (limited to 'drivers/net/wireless/ath') diff --git a/drivers/net/wireless/ath/ath9k/calib.c b/drivers/net/wireless/ath/ath9k/calib.c index fe3c10e6b27..558b228a717 100644 --- a/drivers/net/wireless/ath/ath9k/calib.c +++ b/drivers/net/wireless/ath/ath9k/calib.c @@ -409,14 +409,6 @@ void ath9k_init_nfcal_hist_buffer(struct ath_hw *ah, } } -s16 ath9k_hw_getchan_noise(struct ath_hw *ah, struct ath9k_channel *chan) -{ - if (!ah->curchan || !ah->curchan->noisefloor) - return ath9k_hw_get_default_nf(ah, chan); - - return ah->curchan->noisefloor; -} -EXPORT_SYMBOL(ath9k_hw_getchan_noise); void ath9k_hw_bstuck_nfcal(struct ath_hw *ah) { diff --git a/drivers/net/wireless/ath/ath9k/calib.h b/drivers/net/wireless/ath/ath9k/calib.h index b8973eb8d85..4420780fa3b 100644 --- a/drivers/net/wireless/ath/ath9k/calib.h +++ b/drivers/net/wireless/ath/ath9k/calib.h @@ -106,7 +106,6 @@ bool ath9k_hw_getnf(struct ath_hw *ah, struct ath9k_channel *chan); void ath9k_init_nfcal_hist_buffer(struct ath_hw *ah, struct ath9k_channel *chan); void ath9k_hw_bstuck_nfcal(struct ath_hw *ah); -s16 ath9k_hw_getchan_noise(struct ath_hw *ah, struct ath9k_channel *chan); void ath9k_hw_reset_calibration(struct ath_hw *ah, struct ath9k_cal_list *currCal); -- cgit v1.2.3-70-g09d2 From 165af96d56dce3bd0cd09567106f22215f80bb63 Mon Sep 17 00:00:00 2001 From: Rajkumar Manoharan Date: Mon, 9 May 2011 19:11:26 +0530 Subject: ath9k_hw: Corrected xpabiaslevel register settings for AR9340 Signed-off-by: Rajkumar Manoharan Signed-off-by: John W. Linville --- drivers/net/wireless/ath/ath9k/ar9003_eeprom.c | 14 ++++++-------- 1 file changed, 6 insertions(+), 8 deletions(-) (limited to 'drivers/net/wireless/ath') diff --git a/drivers/net/wireless/ath/ath9k/ar9003_eeprom.c b/drivers/net/wireless/ath/ath9k/ar9003_eeprom.c index a9dd3a4b4af..070dc8b882b 100644 --- a/drivers/net/wireless/ath/ath9k/ar9003_eeprom.c +++ b/drivers/net/wireless/ath/ath9k/ar9003_eeprom.c @@ -3442,17 +3442,15 @@ static void ar9003_hw_xpa_bias_level_apply(struct ath_hw *ah, bool is2ghz) { int bias = ar9003_hw_xpa_bias_level_get(ah, is2ghz); - if (AR_SREV_9485(ah)) + if (AR_SREV_9485(ah) || AR_SREV_9340(ah)) REG_RMW_FIELD(ah, AR_CH0_TOP2, AR_CH0_TOP2_XPABIASLVL, bias); else { REG_RMW_FIELD(ah, AR_CH0_TOP, AR_CH0_TOP_XPABIASLVL, bias); - if (!AR_SREV_9340(ah)) { - REG_RMW_FIELD(ah, AR_CH0_THERM, - AR_CH0_THERM_XPABIASLVL_MSB, - bias >> 2); - REG_RMW_FIELD(ah, AR_CH0_THERM, - AR_CH0_THERM_XPASHORT2GND, 1); - } + REG_RMW_FIELD(ah, AR_CH0_THERM, + AR_CH0_THERM_XPABIASLVL_MSB, + bias >> 2); + REG_RMW_FIELD(ah, AR_CH0_THERM, + AR_CH0_THERM_XPASHORT2GND, 1); } } -- cgit v1.2.3-70-g09d2 From 94333f59cba08a1f6513ecd7e2fc5b85c1949a98 Mon Sep 17 00:00:00 2001 From: Rajkumar Manoharan Date: Mon, 9 May 2011 19:11:27 +0530 Subject: ath9k_hw: Change DCU backoff thresh for AR9340 By changing DCU backoff threshold for AR9340 to 1, helps to reduce rx overrurns seen while running bidirectional traffic. Signed-off-by: Rajkumar Manoharan Signed-off-by: John W. Linville --- drivers/net/wireless/ath/ath9k/mac.c | 9 +++++++-- 1 file changed, 7 insertions(+), 2 deletions(-) (limited to 'drivers/net/wireless/ath') diff --git a/drivers/net/wireless/ath/ath9k/mac.c b/drivers/net/wireless/ath/ath9k/mac.c index 9cf7a7d0e11..bd6d2b9d736 100644 --- a/drivers/net/wireless/ath/ath9k/mac.c +++ b/drivers/net/wireless/ath/ath9k/mac.c @@ -430,8 +430,13 @@ bool ath9k_hw_resettxqueue(struct ath_hw *ah, u32 q) SM(qi->tqi_shretry, AR_D_RETRY_LIMIT_FR_SH)); REG_WRITE(ah, AR_QMISC(q), AR_Q_MISC_DCU_EARLY_TERM_REQ); - REG_WRITE(ah, AR_DMISC(q), - AR_D_MISC_CW_BKOFF_EN | AR_D_MISC_FRAG_WAIT_EN | 0x2); + + if (AR_SREV_9340(ah)) + REG_WRITE(ah, AR_DMISC(q), + AR_D_MISC_CW_BKOFF_EN | AR_D_MISC_FRAG_WAIT_EN | 0x1); + else + REG_WRITE(ah, AR_DMISC(q), + AR_D_MISC_CW_BKOFF_EN | AR_D_MISC_FRAG_WAIT_EN | 0x2); if (qi->tqi_cbrPeriod) { REG_WRITE(ah, AR_QCBRCFG(q), -- cgit v1.2.3-70-g09d2 From 2b892a98db269b96ed097d560aaaa371907d20f5 Mon Sep 17 00:00:00 2001 From: Rajkumar Manoharan Date: Mon, 9 May 2011 19:11:28 +0530 Subject: ath9k: Fix rssi update in ad-hoc mode The average beacon rssi which will be used by ani is not updated in adhoc mode. Signed-off-by: Rajkumar Manoharan Signed-off-by: John W. Linville --- drivers/net/wireless/ath/ath9k/recv.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'drivers/net/wireless/ath') diff --git a/drivers/net/wireless/ath/ath9k/recv.c b/drivers/net/wireless/ath/ath9k/recv.c index a485c040bf8..9fcd1e4f450 100644 --- a/drivers/net/wireless/ath/ath9k/recv.c +++ b/drivers/net/wireless/ath/ath9k/recv.c @@ -917,7 +917,8 @@ static void ath9k_process_rssi(struct ath_common *common, int last_rssi; __le16 fc; - if (ah->opmode != NL80211_IFTYPE_STATION) + if ((ah->opmode != NL80211_IFTYPE_STATION) && + (ah->opmode != NL80211_IFTYPE_ADHOC)) return; fc = hdr->frame_control; -- cgit v1.2.3-70-g09d2 From 729da390034d04ff1b3a3f188dfb04a54f458e35 Mon Sep 17 00:00:00 2001 From: Rajkumar Manoharan Date: Mon, 9 May 2011 19:11:29 +0530 Subject: ath9k: Failed to set default beacon rssi in AP/IBSS mode This beacon rssi will be used to set noisefloor during ani reset. Signed-off-by: Rajkumar Manoharan Signed-off-by: John W. Linville --- drivers/net/wireless/ath/ath9k/main.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers/net/wireless/ath') diff --git a/drivers/net/wireless/ath/ath9k/main.c b/drivers/net/wireless/ath/ath9k/main.c index 11d9eca8fb6..c4d32c54224 100644 --- a/drivers/net/wireless/ath/ath9k/main.c +++ b/drivers/net/wireless/ath/ath9k/main.c @@ -1409,6 +1409,7 @@ static void ath9k_calculate_summary_state(struct ieee80211_hw *hw, /* Set up ANI */ if ((iter_data.naps + iter_data.nadhocs) > 0) { + sc->sc_ah->stats.avgbrssi = ATH_RSSI_DUMMY_MARKER; sc->sc_flags |= SC_OP_ANI_RUN; ath_start_ani(common); } else { -- cgit v1.2.3-70-g09d2 From fd5999cf11c8322568034bbf0d5594be94542a57 Mon Sep 17 00:00:00 2001 From: Javier Cardona Date: Tue, 3 May 2011 16:57:19 -0700 Subject: ath9k: fix beaconing for mesh interfaces Mesh beaconing on ath9k was broken by this commit: commit 4801416c76a3a355076d6d371c00270dfe332e1c Author: Ben Greear Date: Sat Jan 15 19:13:48 2011 +0000 This patch assigns the right opmode when the device is used in mesh mode. Reported-by: Fabrice Deyber fabricedeyber@agilemesh.com Signed-off-by: Javier Cardona Signed-off-by: John W. Linville --- drivers/net/wireless/ath/ath9k/main.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) (limited to 'drivers/net/wireless/ath') diff --git a/drivers/net/wireless/ath/ath9k/main.c b/drivers/net/wireless/ath/ath9k/main.c index c4d32c54224..9dd72d8c78e 100644 --- a/drivers/net/wireless/ath/ath9k/main.c +++ b/drivers/net/wireless/ath/ath9k/main.c @@ -1385,7 +1385,9 @@ static void ath9k_calculate_summary_state(struct ieee80211_hw *hw, ath9k_hw_set_tsfadjust(ah, 0); sc->sc_flags &= ~SC_OP_TSF_RESET; - if (iter_data.nwds + iter_data.nmeshes) + if (iter_data.nmeshes) + ah->opmode = NL80211_IFTYPE_MESH_POINT; + else if (iter_data.nwds) ah->opmode = NL80211_IFTYPE_AP; else if (iter_data.nadhocs) ah->opmode = NL80211_IFTYPE_ADHOC; -- cgit v1.2.3-70-g09d2 From d381f221199c58d2bf25a7024e786fc58562487c Mon Sep 17 00:00:00 2001 From: Ben Greear Date: Fri, 6 May 2011 15:24:34 -0700 Subject: ath5k: Fix lockup due to un-init spinlock. This was introduced in 2.6.39-rc1 it seems. Signed-off-by: Ben Greear Tested-by: Sedat Dilek Signed-off-by: John W. Linville --- drivers/net/wireless/ath/ath5k/base.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/net/wireless/ath') diff --git a/drivers/net/wireless/ath/ath5k/base.c b/drivers/net/wireless/ath/ath5k/base.c index 7583841fc29..aaa0cd72b0d 100644 --- a/drivers/net/wireless/ath/ath5k/base.c +++ b/drivers/net/wireless/ath/ath5k/base.c @@ -2394,7 +2394,7 @@ ath5k_init_softc(struct ath5k_softc *sc, const struct ath_bus_ops *bus_ops) spin_lock_init(&sc->rxbuflock); spin_lock_init(&sc->txbuflock); spin_lock_init(&sc->block); - + spin_lock_init(&sc->irqlock); /* Setup interrupt handler */ ret = request_irq(sc->irq, ath5k_intr, IRQF_SHARED, "ath", sc); -- cgit v1.2.3-70-g09d2 From f59a59fea3be78c2bda23cb7f55225b33c502c3c Mon Sep 17 00:00:00 2001 From: Felix Fietkau Date: Tue, 10 May 2011 20:52:22 +0200 Subject: ath9k: fix a regression in PS frame filter handling Only leave filtering enabled for AP or VLAN interfaces, clear the destination mask for all other interfaces. Signed-off-by: Felix Fietkau Reported-by: Ben Greear Tested-by: Ben Greear Signed-off-by: John W. Linville --- drivers/net/wireless/ath/ath9k/main.c | 5 +++++ drivers/net/wireless/ath/ath9k/xmit.c | 6 ++++++ 2 files changed, 11 insertions(+) (limited to 'drivers/net/wireless/ath') diff --git a/drivers/net/wireless/ath/ath9k/main.c b/drivers/net/wireless/ath/ath9k/main.c index 9dd72d8c78e..33816091b43 100644 --- a/drivers/net/wireless/ath/ath9k/main.c +++ b/drivers/net/wireless/ath/ath9k/main.c @@ -1782,6 +1782,11 @@ static int ath9k_sta_add(struct ieee80211_hw *hw, struct ieee80211_key_conf ps_key = { }; ath_node_attach(sc, sta); + + if (vif->type != NL80211_IFTYPE_AP && + vif->type != NL80211_IFTYPE_AP_VLAN) + return 0; + an->ps_key = ath_key_config(common, vif, sta, &ps_key); return 0; diff --git a/drivers/net/wireless/ath/ath9k/xmit.c b/drivers/net/wireless/ath/ath9k/xmit.c index 947d5b3b6e0..41469d7a2cd 100644 --- a/drivers/net/wireless/ath/ath9k/xmit.c +++ b/drivers/net/wireless/ath/ath9k/xmit.c @@ -1845,6 +1845,7 @@ int ath_tx_start(struct ieee80211_hw *hw, struct sk_buff *skb, struct ieee80211_hdr *hdr = (struct ieee80211_hdr *) skb->data; struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb); struct ieee80211_sta *sta = info->control.sta; + struct ieee80211_vif *vif = info->control.vif; struct ath_softc *sc = hw->priv; struct ath_txq *txq = txctl->txq; struct ath_buf *bf; @@ -1882,6 +1883,11 @@ int ath_tx_start(struct ieee80211_hw *hw, struct sk_buff *skb, memmove(skb->data, skb->data + padsize, padpos); } + if ((vif && vif->type != NL80211_IFTYPE_AP && + vif->type != NL80211_IFTYPE_AP_VLAN) || + !ieee80211_is_data(hdr->frame_control)) + info->flags |= IEEE80211_TX_CTL_CLEAR_PS_FILT; + setup_frame_info(hw, skb, frmlen); /* -- cgit v1.2.3-70-g09d2 From 9ba7f4f5eba5f4b44c7796bbad29f8ec3a7d5864 Mon Sep 17 00:00:00 2001 From: "Luis R. Rodriguez" Date: Wed, 11 May 2011 14:57:26 -0700 Subject: ath9k_hw: fix dual band assumption for XB113 The XB113 cards are single band, 5 GHz-only, but the default settings were configured to assume it was dual band. Users of these cards then would see 2.4 GHz channels but you would never get any scan results from these channels given that the radio is not present. Cc: stable@kernel.org Cc: Fiona Cain Cc: Ray Li Cc: Kathy Giori Cc: Aeolus Yang Cc: Dan Friedman Signed-off-by: Luis R. Rodriguez Signed-off-by: John W. Linville --- drivers/net/wireless/ath/ath9k/ar9003_eeprom.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/net/wireless/ath') diff --git a/drivers/net/wireless/ath/ath9k/ar9003_eeprom.c b/drivers/net/wireless/ath/ath9k/ar9003_eeprom.c index 070dc8b882b..0647cc518d9 100644 --- a/drivers/net/wireless/ath/ath9k/ar9003_eeprom.c +++ b/drivers/net/wireless/ath/ath9k/ar9003_eeprom.c @@ -652,7 +652,7 @@ static const struct ar9300_eeprom ar9300_x113 = { .regDmn = { LE16(0), LE16(0x1f) }, .txrxMask = 0x77, /* 4 bits tx and 4 bits rx */ .opCapFlags = { - .opFlags = AR5416_OPFLAGS_11G | AR5416_OPFLAGS_11A, + .opFlags = AR5416_OPFLAGS_11A, .eepMisc = 0, }, .rfSilent = 0, -- cgit v1.2.3-70-g09d2 From be0e6aa5a0c487a2a0880dda8bc70f7f1860fc39 Mon Sep 17 00:00:00 2001 From: Senthil Balasubramanian Date: Thu, 12 May 2011 16:24:28 +0530 Subject: ath9k_hw: Fix STA connection issues with AR9380 (XB113). XB113 (AR9380) 3x3 SB 5G only cards were failing to connect to APs due to incorrect xpabiaslevel configuration. fix it. Cc: stable@kernel.org Cc: Ray Li Cc: Kathy Giori Cc: Aeolus Yang Cc: compat@orbit-lab.org Signed-off-by: Senthil Balasubramanian Signed-off-by: John W. Linville --- drivers/net/wireless/ath/ath9k/ar9003_eeprom.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/net/wireless/ath') diff --git a/drivers/net/wireless/ath/ath9k/ar9003_eeprom.c b/drivers/net/wireless/ath/ath9k/ar9003_eeprom.c index 0647cc518d9..6dfb69ae5b0 100644 --- a/drivers/net/wireless/ath/ath9k/ar9003_eeprom.c +++ b/drivers/net/wireless/ath/ath9k/ar9003_eeprom.c @@ -922,7 +922,7 @@ static const struct ar9300_eeprom ar9300_x113 = { .db_stage2 = {3, 3, 3}, /* 3 chain */ .db_stage3 = {3, 3, 3}, /* doesn't exist for 2G */ .db_stage4 = {3, 3, 3}, /* don't exist for 2G */ - .xpaBiasLvl = 0, + .xpaBiasLvl = 0xf, .txFrameToDataStart = 0x0e, .txFrameToPaOn = 0x0e, .txClip = 3, /* 4 bits tx_clip, 4 bits dac_scale_cck */ -- cgit v1.2.3-70-g09d2 From 69de3721750ea4fae504be9e67f140cafe1c7a89 Mon Sep 17 00:00:00 2001 From: Mohammed Shafi Shajakhan Date: Fri, 13 May 2011 20:29:04 +0530 Subject: ath9k_hw: make antenna diversity modules chip specific this is necessary to support Antenna diversity and combining in new chip sets such as AR9485, previously Antenna diversity support is available only in AR9285 Cc: Gabriel Tseng Cc: Senthilkumar Balasubramanian Signed-off-by: Mohammed Shafi Shajakhan Signed-off-by: John W. Linville --- drivers/net/wireless/ath/ath9k/ar9002_phy.c | 42 +++++++++++++++-------------- drivers/net/wireless/ath/ath9k/hw-ops.h | 12 +++++++++ drivers/net/wireless/ath/ath9k/hw.h | 9 ++++--- 3 files changed, 39 insertions(+), 24 deletions(-) (limited to 'drivers/net/wireless/ath') diff --git a/drivers/net/wireless/ath/ath9k/ar9002_phy.c b/drivers/net/wireless/ath/ath9k/ar9002_phy.c index 7d68d61e406..b4a0c1d3b11 100644 --- a/drivers/net/wireless/ath/ath9k/ar9002_phy.c +++ b/drivers/net/wireless/ath/ath9k/ar9002_phy.c @@ -517,23 +517,7 @@ static void ar9002_hw_set_nf_limits(struct ath_hw *ah) } } -void ar9002_hw_attach_phy_ops(struct ath_hw *ah) -{ - struct ath_hw_private_ops *priv_ops = ath9k_hw_private_ops(ah); - - priv_ops->set_rf_regs = NULL; - priv_ops->rf_alloc_ext_banks = NULL; - priv_ops->rf_free_ext_banks = NULL; - priv_ops->rf_set_freq = ar9002_hw_set_channel; - priv_ops->spur_mitigate_freq = ar9002_hw_spur_mitigate; - priv_ops->olc_init = ar9002_olc_init; - priv_ops->compute_pll_control = ar9002_hw_compute_pll_control; - priv_ops->do_getnf = ar9002_hw_do_getnf; - - ar9002_hw_set_nf_limits(ah); -} - -void ath9k_hw_antdiv_comb_conf_get(struct ath_hw *ah, +static void ar9002_hw_antdiv_comb_conf_get(struct ath_hw *ah, struct ath_hw_antcomb_conf *antconf) { u32 regval; @@ -546,9 +530,8 @@ void ath9k_hw_antdiv_comb_conf_get(struct ath_hw *ah, antconf->fast_div_bias = (regval & AR_PHY_9285_FAST_DIV_BIAS) >> AR_PHY_9285_FAST_DIV_BIAS_S; } -EXPORT_SYMBOL(ath9k_hw_antdiv_comb_conf_get); -void ath9k_hw_antdiv_comb_conf_set(struct ath_hw *ah, +static void ar9002_hw_antdiv_comb_conf_set(struct ath_hw *ah, struct ath_hw_antcomb_conf *antconf) { u32 regval; @@ -566,4 +549,23 @@ void ath9k_hw_antdiv_comb_conf_set(struct ath_hw *ah, REG_WRITE(ah, AR_PHY_MULTICHAIN_GAIN_CTL, regval); } -EXPORT_SYMBOL(ath9k_hw_antdiv_comb_conf_set); + +void ar9002_hw_attach_phy_ops(struct ath_hw *ah) +{ + struct ath_hw_private_ops *priv_ops = ath9k_hw_private_ops(ah); + struct ath_hw_ops *ops = ath9k_hw_ops(ah); + + priv_ops->set_rf_regs = NULL; + priv_ops->rf_alloc_ext_banks = NULL; + priv_ops->rf_free_ext_banks = NULL; + priv_ops->rf_set_freq = ar9002_hw_set_channel; + priv_ops->spur_mitigate_freq = ar9002_hw_spur_mitigate; + priv_ops->olc_init = ar9002_olc_init; + priv_ops->compute_pll_control = ar9002_hw_compute_pll_control; + priv_ops->do_getnf = ar9002_hw_do_getnf; + + ops->antdiv_comb_conf_get = ar9002_hw_antdiv_comb_conf_get; + ops->antdiv_comb_conf_set = ar9002_hw_antdiv_comb_conf_set; + + ar9002_hw_set_nf_limits(ah); +} diff --git a/drivers/net/wireless/ath/ath9k/hw-ops.h b/drivers/net/wireless/ath/ath9k/hw-ops.h index 99f8334d1df..8b8f0445aef 100644 --- a/drivers/net/wireless/ath/ath9k/hw-ops.h +++ b/drivers/net/wireless/ath/ath9k/hw-ops.h @@ -121,6 +121,18 @@ static inline void ath9k_hw_set_clrdmask(struct ath_hw *ah, void *ds, bool val) ath9k_hw_ops(ah)->set_clrdmask(ah, ds, val); } +static inline void ath9k_hw_antdiv_comb_conf_get(struct ath_hw *ah, + struct ath_hw_antcomb_conf *antconf) +{ + ath9k_hw_ops(ah)->antdiv_comb_conf_get(ah, antconf); +} + +static inline void ath9k_hw_antdiv_comb_conf_set(struct ath_hw *ah, + struct ath_hw_antcomb_conf *antconf) +{ + ath9k_hw_ops(ah)->antdiv_comb_conf_set(ah, antconf); +} + /* Private hardware call ops */ /* PHY ops */ diff --git a/drivers/net/wireless/ath/ath9k/hw.h b/drivers/net/wireless/ath/ath9k/hw.h index b2248bba25a..67cca10bf4c 100644 --- a/drivers/net/wireless/ath/ath9k/hw.h +++ b/drivers/net/wireless/ath/ath9k/hw.h @@ -629,6 +629,11 @@ struct ath_hw_ops { void (*set11n_aggr_last)(struct ath_hw *ah, void *ds); void (*clr11n_aggr)(struct ath_hw *ah, void *ds); void (*set_clrdmask)(struct ath_hw *ah, void *ds, bool val); + void (*antdiv_comb_conf_get)(struct ath_hw *ah, + struct ath_hw_antcomb_conf *antconf); + void (*antdiv_comb_conf_set)(struct ath_hw *ah, + struct ath_hw_antcomb_conf *antconf); + }; struct ath_nf_limits { @@ -904,10 +909,6 @@ void ath9k_hw_cfg_output(struct ath_hw *ah, u32 gpio, void ath9k_hw_set_gpio(struct ath_hw *ah, u32 gpio, u32 val); u32 ath9k_hw_getdefantenna(struct ath_hw *ah); void ath9k_hw_setantenna(struct ath_hw *ah, u32 antenna); -void ath9k_hw_antdiv_comb_conf_get(struct ath_hw *ah, - struct ath_hw_antcomb_conf *antconf); -void ath9k_hw_antdiv_comb_conf_set(struct ath_hw *ah, - struct ath_hw_antcomb_conf *antconf); /* General Operation */ bool ath9k_hw_wait(struct ath_hw *ah, u32 reg, u32 mask, u32 val, u32 timeout); -- cgit v1.2.3-70-g09d2 From 21d2c63a2866a47030803de3db9b4e8759806095 Mon Sep 17 00:00:00 2001 From: Mohammed Shafi Shajakhan Date: Fri, 13 May 2011 20:29:31 +0530 Subject: ath9k_hw: enable Antenna diversity for AR9485 read antenna diversity and combining information from the EEPROM. Enable antenna diversity/combining feature only when both LNA diversity and fast diversity are supported Cc: Gabriel Tseng Cc: Senthilkumar Balasubramanian Tested-by: Mohammed Shafi Shajakhan Signed-off-by: Mohammed Shafi Shajakhan Signed-off-by: John W. Linville --- drivers/net/wireless/ath/ath9k/hw.c | 16 ++++++++++++++++ 1 file changed, 16 insertions(+) (limited to 'drivers/net/wireless/ath') diff --git a/drivers/net/wireless/ath/ath9k/hw.c b/drivers/net/wireless/ath/ath9k/hw.c index 58f3d421033..b75b5dca4e2 100644 --- a/drivers/net/wireless/ath/ath9k/hw.c +++ b/drivers/net/wireless/ath/ath9k/hw.c @@ -2022,6 +2022,22 @@ int ath9k_hw_fill_cap_info(struct ath_hw *ah) } + if (AR_SREV_9485(ah)) { + ant_div_ctl1 = ah->eep_ops->get_eeprom(ah, EEP_ANT_DIV_CTL1); + /* + * enable the diversity-combining algorithm only when + * both enable_lna_div and enable_fast_div are set + * Table for Diversity + * ant_div_alt_lnaconf bit 0-1 + * ant_div_main_lnaconf bit 2-3 + * ant_div_alt_gaintb bit 4 + * ant_div_main_gaintb bit 5 + * enable_ant_div_lnadiv bit 6 + * enable_ant_fast_div bit 7 + */ + if ((ant_div_ctl1 >> 0x6) == 0x3) + pCap->hw_caps |= ATH9K_HW_CAP_ANT_DIV_COMB; + } if (AR_SREV_9485_10(ah)) { pCap->pcie_lcr_extsync_en = true; -- cgit v1.2.3-70-g09d2 From c6ba9feb4fa33f31f26ac1a2b0a337d79426b822 Mon Sep 17 00:00:00 2001 From: Mohammed Shafi Shajakhan Date: Fri, 13 May 2011 20:29:53 +0530 Subject: ath9k_hw: define registers/macros to support Antenna diversity define few registers and macros to configure/enable Antenna diversity parameters in AR9485 Cc: Gabriel Tseng Cc: Senthilkumar Balasubramanian Signed-off-by: Mohammed Shafi Shajakhan Signed-off-by: John W. Linville --- drivers/net/wireless/ath/ath9k/ar9003_phy.h | 22 ++++++++++++++++++++++ drivers/net/wireless/ath/ath9k/hw.h | 3 +++ 2 files changed, 25 insertions(+) (limited to 'drivers/net/wireless/ath') diff --git a/drivers/net/wireless/ath/ath9k/ar9003_phy.h b/drivers/net/wireless/ath/ath9k/ar9003_phy.h index 2a0d5cbb7e7..c7505b48e5c 100644 --- a/drivers/net/wireless/ath/ath9k/ar9003_phy.h +++ b/drivers/net/wireless/ath/ath9k/ar9003_phy.h @@ -261,12 +261,34 @@ #define AR_PHY_EXT_CCA0 (AR_AGC_BASE + 0x20) #define AR_PHY_RESTART (AR_AGC_BASE + 0x24) +/* + * Antenna Diversity settings + */ #define AR_PHY_MC_GAIN_CTRL (AR_AGC_BASE + 0x28) #define AR_ANT_DIV_CTRL_ALL 0x7e000000 #define AR_ANT_DIV_CTRL_ALL_S 25 #define AR_ANT_DIV_ENABLE 0x1000000 #define AR_ANT_DIV_ENABLE_S 24 + +#define AR_PHY_9485_ANT_FAST_DIV_BIAS 0x00007e00 +#define AR_PHY_9485_ANT_FAST_DIV_BIAS_S 9 +#define AR_PHY_9485_ANT_DIV_LNADIV 0x01000000 +#define AR_PHY_9485_ANT_DIV_LNADIV_S 24 +#define AR_PHY_9485_ANT_DIV_ALT_LNACONF 0x06000000 +#define AR_PHY_9485_ANT_DIV_ALT_LNACONF_S 25 +#define AR_PHY_9485_ANT_DIV_MAIN_LNACONF 0x18000000 +#define AR_PHY_9485_ANT_DIV_MAIN_LNACONF_S 27 +#define AR_PHY_9485_ANT_DIV_ALT_GAINTB 0x20000000 +#define AR_PHY_9485_ANT_DIV_ALT_GAINTB_S 29 +#define AR_PHY_9485_ANT_DIV_MAIN_GAINTB 0x40000000 +#define AR_PHY_9485_ANT_DIV_MAIN_GAINTB_S 30 + +#define AR_PHY_9485_ANT_DIV_LNA1_MINUS_LNA2 0x0 +#define AR_PHY_9485_ANT_DIV_LNA2 0x1 +#define AR_PHY_9485_ANT_DIV_LNA1 0x2 +#define AR_PHY_9485_ANT_DIV_LNA1_PLUS_LNA2 0x3 + #define AR_PHY_EXTCHN_PWRTHR1 (AR_AGC_BASE + 0x2c) #define AR_PHY_EXT_CHN_WIN (AR_AGC_BASE + 0x30) #define AR_PHY_20_40_DET_THR (AR_AGC_BASE + 0x34) diff --git a/drivers/net/wireless/ath/ath9k/hw.h b/drivers/net/wireless/ath/ath9k/hw.h index 67cca10bf4c..80f512d1f97 100644 --- a/drivers/net/wireless/ath/ath9k/hw.h +++ b/drivers/net/wireless/ath/ath9k/hw.h @@ -479,6 +479,9 @@ struct ath_hw_antcomb_conf { u8 main_lna_conf; u8 alt_lna_conf; u8 fast_div_bias; + u8 main_gaintb; + u8 alt_gaintb; + int lna1_lna2_delta; }; /** -- cgit v1.2.3-70-g09d2 From 842ca780af06d166c87725b68f4fe359c3da7bc0 Mon Sep 17 00:00:00 2001 From: Mohammed Shafi Shajakhan Date: Fri, 13 May 2011 20:30:27 +0530 Subject: ath9k_hw: config diversity based on eeprom contents * enable LNA-diversity, fast-diversity for AR9485 based on the value read from EEPROM content * if antenna diversity/combining is supported, set LNA1 for the main antenna and LNA2 for the alternate antenna based on the new diversity algorithm Cc: Gabriel Tseng Cc: Senthilkumar Balasubramanian Cc: Luis Rodriguez Signed-off-by: Mohammed Shafi Shajakhan Signed-off-by: John W. Linville --- drivers/net/wireless/ath/ath9k/ar9003_eeprom.c | 50 ++++++++++++++++++++++---- 1 file changed, 44 insertions(+), 6 deletions(-) (limited to 'drivers/net/wireless/ath') diff --git a/drivers/net/wireless/ath/ath9k/ar9003_eeprom.c b/drivers/net/wireless/ath/ath9k/ar9003_eeprom.c index 6dfb69ae5b0..c7ad0562596 100644 --- a/drivers/net/wireless/ath/ath9k/ar9003_eeprom.c +++ b/drivers/net/wireless/ath/ath9k/ar9003_eeprom.c @@ -3498,6 +3498,8 @@ static u16 ar9003_hw_ant_ctrl_chain_get(struct ath_hw *ah, static void ar9003_hw_ant_ctrl_apply(struct ath_hw *ah, bool is2ghz) { int chain; + u32 regval; + u32 ant_div_ctl1; static const u32 switch_chain_reg[AR9300_MAX_CHAINS] = { AR_PHY_SWITCH_CHAIN_0, AR_PHY_SWITCH_CHAIN_1, @@ -3523,13 +3525,49 @@ static void ar9003_hw_ant_ctrl_apply(struct ath_hw *ah, bool is2ghz) if (AR_SREV_9485(ah)) { value = ath9k_hw_ar9300_get_eeprom(ah, EEP_ANT_DIV_CTL1); - REG_RMW_FIELD(ah, AR_PHY_MC_GAIN_CTRL, AR_ANT_DIV_CTRL_ALL, - value); - REG_RMW_FIELD(ah, AR_PHY_MC_GAIN_CTRL, AR_ANT_DIV_ENABLE, - value >> 6); - REG_RMW_FIELD(ah, AR_PHY_CCK_DETECT, AR_FAST_DIV_ENABLE, - value >> 7); + /* + * main_lnaconf, alt_lnaconf, main_tb, alt_tb + * are the fields present + */ + regval = REG_READ(ah, AR_PHY_MC_GAIN_CTRL); + regval &= (~AR_ANT_DIV_CTRL_ALL); + regval |= (value & 0x3f) << AR_ANT_DIV_CTRL_ALL_S; + /* enable_lnadiv */ + regval &= (~AR_PHY_9485_ANT_DIV_LNADIV); + regval |= ((value >> 6) & 0x1) << + AR_PHY_9485_ANT_DIV_LNADIV_S; + REG_WRITE(ah, AR_PHY_MC_GAIN_CTRL, regval); + + /*enable fast_div */ + regval = REG_READ(ah, AR_PHY_CCK_DETECT); + regval &= (~AR_FAST_DIV_ENABLE); + regval |= ((value >> 7) & 0x1) << + AR_FAST_DIV_ENABLE_S; + REG_WRITE(ah, AR_PHY_CCK_DETECT, regval); + ant_div_ctl1 = + ah->eep_ops->get_eeprom(ah, EEP_ANT_DIV_CTL1); + /* check whether antenna diversity is enabled */ + if ((ant_div_ctl1 >> 0x6) == 0x3) { + regval = REG_READ(ah, AR_PHY_MC_GAIN_CTRL); + /* + * clear bits 25-30 main_lnaconf, alt_lnaconf, + * main_tb, alt_tb + */ + regval &= (~(AR_PHY_9485_ANT_DIV_MAIN_LNACONF | + AR_PHY_9485_ANT_DIV_ALT_LNACONF | + AR_PHY_9485_ANT_DIV_ALT_GAINTB | + AR_PHY_9485_ANT_DIV_MAIN_GAINTB)); + /* by default use LNA1 for the main antenna */ + regval |= (AR_PHY_9485_ANT_DIV_LNA1 << + AR_PHY_9485_ANT_DIV_MAIN_LNACONF_S); + regval |= (AR_PHY_9485_ANT_DIV_LNA2 << + AR_PHY_9485_ANT_DIV_ALT_LNACONF_S); + REG_WRITE(ah, AR_PHY_MC_GAIN_CTRL, regval); + } + + } + } static void ar9003_hw_drive_strength_apply(struct ath_hw *ah) -- cgit v1.2.3-70-g09d2 From 6bcbc062c23ac769cb775f3d2cf209db9d1a96fe Mon Sep 17 00:00:00 2001 From: Mohammed Shafi Shajakhan Date: Fri, 13 May 2011 20:30:41 +0530 Subject: ath9k_hw: define modules to get/set Antenna diversity paramaters these are the two important modules that will be called by the antenna diversity algorithm module in the rx. this will continuosly configure the hardware based on the current diversity status obtained from the algorithm Cc: Gabriel Tseng Cc: Senthilkumar Balasubramanian Signed-off-by: Mohammed Shafi Shajakhan Signed-off-by: John W. Linville --- drivers/net/wireless/ath/ath9k/ar9003_phy.c | 44 +++++++++++++++++++++++++++++ 1 file changed, 44 insertions(+) (limited to 'drivers/net/wireless/ath') diff --git a/drivers/net/wireless/ath/ath9k/ar9003_phy.c b/drivers/net/wireless/ath/ath9k/ar9003_phy.c index c83be2dd571..d2a5d2737cd 100644 --- a/drivers/net/wireless/ath/ath9k/ar9003_phy.c +++ b/drivers/net/wireless/ath/ath9k/ar9003_phy.c @@ -1184,9 +1184,50 @@ static void ar9003_hw_set_radar_conf(struct ath_hw *ah) conf->radar_inband = 8; } +static void ar9003_hw_antdiv_comb_conf_get(struct ath_hw *ah, + struct ath_hw_antcomb_conf *antconf) +{ + u32 regval; + + regval = REG_READ(ah, AR_PHY_MC_GAIN_CTRL); + antconf->main_lna_conf = (regval & AR_PHY_9485_ANT_DIV_MAIN_LNACONF) >> + AR_PHY_9485_ANT_DIV_MAIN_LNACONF_S; + antconf->alt_lna_conf = (regval & AR_PHY_9485_ANT_DIV_ALT_LNACONF) >> + AR_PHY_9485_ANT_DIV_ALT_LNACONF_S; + antconf->fast_div_bias = (regval & AR_PHY_9485_ANT_FAST_DIV_BIAS) >> + AR_PHY_9485_ANT_FAST_DIV_BIAS_S; +} + +static void ar9003_hw_antdiv_comb_conf_set(struct ath_hw *ah, + struct ath_hw_antcomb_conf *antconf) +{ + u32 regval; + + regval = REG_READ(ah, AR_PHY_MC_GAIN_CTRL); + regval &= ~(AR_PHY_9485_ANT_DIV_MAIN_LNACONF | + AR_PHY_9485_ANT_DIV_ALT_LNACONF | + AR_PHY_9485_ANT_FAST_DIV_BIAS | + AR_PHY_9485_ANT_DIV_MAIN_GAINTB | + AR_PHY_9485_ANT_DIV_ALT_GAINTB); + regval |= ((antconf->main_lna_conf << + AR_PHY_9485_ANT_DIV_MAIN_LNACONF_S) + & AR_PHY_9485_ANT_DIV_MAIN_LNACONF); + regval |= ((antconf->alt_lna_conf << AR_PHY_9485_ANT_DIV_ALT_LNACONF_S) + & AR_PHY_9485_ANT_DIV_ALT_LNACONF); + regval |= ((antconf->fast_div_bias << AR_PHY_9485_ANT_FAST_DIV_BIAS_S) + & AR_PHY_9485_ANT_FAST_DIV_BIAS); + regval |= ((antconf->main_gaintb << AR_PHY_9485_ANT_DIV_MAIN_GAINTB_S) + & AR_PHY_9485_ANT_DIV_MAIN_GAINTB); + regval |= ((antconf->alt_gaintb << AR_PHY_9485_ANT_DIV_ALT_GAINTB_S) + & AR_PHY_9485_ANT_DIV_ALT_GAINTB); + + REG_WRITE(ah, AR_PHY_MC_GAIN_CTRL, regval); +} + void ar9003_hw_attach_phy_ops(struct ath_hw *ah) { struct ath_hw_private_ops *priv_ops = ath9k_hw_private_ops(ah); + struct ath_hw_ops *ops = ath9k_hw_ops(ah); static const u32 ar9300_cca_regs[6] = { AR_PHY_CCA_0, AR_PHY_CCA_1, @@ -1213,6 +1254,9 @@ void ar9003_hw_attach_phy_ops(struct ath_hw *ah) priv_ops->ani_cache_ini_regs = ar9003_hw_ani_cache_ini_regs; priv_ops->set_radar_params = ar9003_hw_set_radar_params; + ops->antdiv_comb_conf_get = ar9003_hw_antdiv_comb_conf_get; + ops->antdiv_comb_conf_set = ar9003_hw_antdiv_comb_conf_set; + ar9003_hw_set_nf_limits(ah); ar9003_hw_set_radar_conf(ah); memcpy(ah->nf_regs, ar9300_cca_regs, sizeof(ah->nf_regs)); -- cgit v1.2.3-70-g09d2 From 8afbcc8bfb549a522298fa4a31ee5155c2b5f7a0 Mon Sep 17 00:00:00 2001 From: Mohammed Shafi Shajakhan Date: Fri, 13 May 2011 20:30:56 +0530 Subject: ath9k_hw: define antenna diversity group AR9285 belongs to diversity group 0 and AR9485 belongs to diversity group 2. Based on the diversity group we configure certain antenna diversity paramaters such as lna1_lna2_delta and fast diversity bias values. For AR9485 we have some gain table parameter which selects the gain table 0/1 for main and alternate antenna Cc: Gabriel Tseng Cc: Senthilkumar Balasubramanian Signed-off-by: Mohammed Shafi Shajakhan Signed-off-by: John W. Linville --- drivers/net/wireless/ath/ath9k/ar9002_phy.c | 2 ++ drivers/net/wireless/ath/ath9k/ar9003_phy.c | 2 ++ drivers/net/wireless/ath/ath9k/ath9k.h | 1 - drivers/net/wireless/ath/ath9k/hw.h | 1 + drivers/net/wireless/ath/ath9k/recv.c | 2 +- 5 files changed, 6 insertions(+), 2 deletions(-) (limited to 'drivers/net/wireless/ath') diff --git a/drivers/net/wireless/ath/ath9k/ar9002_phy.c b/drivers/net/wireless/ath/ath9k/ar9002_phy.c index b4a0c1d3b11..a57e963cf0d 100644 --- a/drivers/net/wireless/ath/ath9k/ar9002_phy.c +++ b/drivers/net/wireless/ath/ath9k/ar9002_phy.c @@ -529,6 +529,8 @@ static void ar9002_hw_antdiv_comb_conf_get(struct ath_hw *ah, AR_PHY_9285_ANT_DIV_ALT_LNACONF_S; antconf->fast_div_bias = (regval & AR_PHY_9285_FAST_DIV_BIAS) >> AR_PHY_9285_FAST_DIV_BIAS_S; + antconf->lna1_lna2_delta = -3; + antconf->div_group = 0; } static void ar9002_hw_antdiv_comb_conf_set(struct ath_hw *ah, diff --git a/drivers/net/wireless/ath/ath9k/ar9003_phy.c b/drivers/net/wireless/ath/ath9k/ar9003_phy.c index d2a5d2737cd..25f3c2fdf2b 100644 --- a/drivers/net/wireless/ath/ath9k/ar9003_phy.c +++ b/drivers/net/wireless/ath/ath9k/ar9003_phy.c @@ -1196,6 +1196,8 @@ static void ar9003_hw_antdiv_comb_conf_get(struct ath_hw *ah, AR_PHY_9485_ANT_DIV_ALT_LNACONF_S; antconf->fast_div_bias = (regval & AR_PHY_9485_ANT_FAST_DIV_BIAS) >> AR_PHY_9485_ANT_FAST_DIV_BIAS_S; + antconf->lna1_lna2_delta = -9; + antconf->div_group = 2; } static void ar9003_hw_antdiv_comb_conf_set(struct ath_hw *ah, diff --git a/drivers/net/wireless/ath/ath9k/ath9k.h b/drivers/net/wireless/ath/ath9k/ath9k.h index f2f672bc596..03b37d7be1c 100644 --- a/drivers/net/wireless/ath/ath9k/ath9k.h +++ b/drivers/net/wireless/ath/ath9k/ath9k.h @@ -483,7 +483,6 @@ static inline void ath_deinit_leds(struct ath_softc *sc) #define ATH_ANT_DIV_COMB_ALT_ANT_RATIO 30 #define ATH_ANT_DIV_COMB_ALT_ANT_RATIO2 20 -#define ATH_ANT_DIV_COMB_LNA1_LNA2_DELTA -3 #define ATH_ANT_DIV_COMB_LNA1_LNA2_SWITCH_DELTA -1 #define ATH_ANT_DIV_COMB_LNA1_DELTA_HI -4 #define ATH_ANT_DIV_COMB_LNA1_DELTA_MID -2 diff --git a/drivers/net/wireless/ath/ath9k/hw.h b/drivers/net/wireless/ath/ath9k/hw.h index 80f512d1f97..7af2773d2bf 100644 --- a/drivers/net/wireless/ath/ath9k/hw.h +++ b/drivers/net/wireless/ath/ath9k/hw.h @@ -482,6 +482,7 @@ struct ath_hw_antcomb_conf { u8 main_gaintb; u8 alt_gaintb; int lna1_lna2_delta; + u8 div_group; }; /** diff --git a/drivers/net/wireless/ath/ath9k/recv.c b/drivers/net/wireless/ath/ath9k/recv.c index 9fcd1e4f450..85e05329a60 100644 --- a/drivers/net/wireless/ath/ath9k/recv.c +++ b/drivers/net/wireless/ath/ath9k/recv.c @@ -1442,7 +1442,7 @@ static void ath_ant_comb_scan(struct ath_softc *sc, struct ath_rx_status *rs) } if ((alt_rssi_avg < (main_rssi_avg + - ATH_ANT_DIV_COMB_LNA1_LNA2_DELTA))) + div_ant_conf.lna1_lna2_delta))) goto div_comb_done; } -- cgit v1.2.3-70-g09d2 From b85c5734f00886ee0f33ef4d0038ed9a278eefce Mon Sep 17 00:00:00 2001 From: Mohammed Shafi Shajakhan Date: Fri, 13 May 2011 20:31:09 +0530 Subject: ath9k: Implement an API to swap main/ALT LNA's for the diversity group 2(AR9485) we swap the LNA's of main/ALT antenna based on alternate antenna's rssi average in comparision with main antenna's rssi, while for AR9285(antenna diversity group 0)we still follow the older method of looking at the packet count in alternate antenna Cc: Gabriel Tseng Cc: Senthilkumar Balasubramanian Signed-off-by: Mohammed Shafi Shajakhan Signed-off-by: John W. Linville --- drivers/net/wireless/ath/ath9k/recv.c | 31 ++++++++++++++++++++++++++++++- 1 file changed, 30 insertions(+), 1 deletion(-) (limited to 'drivers/net/wireless/ath') diff --git a/drivers/net/wireless/ath/ath9k/recv.c b/drivers/net/wireless/ath/ath9k/recv.c index 85e05329a60..47e0fc1aaba 100644 --- a/drivers/net/wireless/ath/ath9k/recv.c +++ b/drivers/net/wireless/ath/ath9k/recv.c @@ -28,6 +28,33 @@ static inline bool ath_is_alt_ant_ratio_better(int alt_ratio, int maxdelta, (alt_rssi_avg > main_rssi_avg + mindelta)) && (pkt_count > 50); } +static inline bool ath_ant_div_comb_alt_check(u8 div_group, int alt_ratio, + int curr_main_set, int curr_alt_set, + int alt_rssi_avg, int main_rssi_avg) +{ + bool result = false; + switch (div_group) { + case 0: + if (alt_ratio > ATH_ANT_DIV_COMB_ALT_ANT_RATIO) + result = true; + break; + case 1: + if ((((curr_main_set == ATH_ANT_DIV_COMB_LNA2) && + (curr_alt_set == ATH_ANT_DIV_COMB_LNA1) && + (alt_rssi_avg >= (main_rssi_avg - 5))) || + ((curr_main_set == ATH_ANT_DIV_COMB_LNA1) && + (curr_alt_set == ATH_ANT_DIV_COMB_LNA2) && + (alt_rssi_avg >= (main_rssi_avg - 2)))) && + (alt_rssi_avg >= 4)) + result = true; + else + result = false; + break; + } + + return result; +} + static inline bool ath9k_check_auto_sleep(struct ath_softc *sc) { return sc->ps_enabled && @@ -1413,7 +1440,9 @@ static void ath_ant_comb_scan(struct ath_softc *sc, struct ath_rx_status *rs) } if (!antcomb->scan) { - if (alt_ratio > ATH_ANT_DIV_COMB_ALT_ANT_RATIO) { + if (ath_ant_div_comb_alt_check(div_ant_conf.div_group, + alt_ratio, curr_main_set, curr_alt_set, + alt_rssi_avg, main_rssi_avg)) { if (curr_alt_set == ATH_ANT_DIV_COMB_LNA2) { /* Switch main and alt LNA */ div_ant_conf.main_lna_conf = -- cgit v1.2.3-70-g09d2 From 3e9a212a9e21266115bad2982016950fb2bf29c2 Mon Sep 17 00:00:00 2001 From: Mohammed Shafi Shajakhan Date: Fri, 13 May 2011 20:31:23 +0530 Subject: ath9k: configure fast_div_bias based on diversity group configure fast diversity bias based on the antenna diversity group and based on main/alt LNA configurations. also configure main antenna and alternate antenna to gain-table 0 for diversity group 2(AR9485) Cc: Gabriel Tseng Cc: Senthilkumar Balasubramanian Signed-off-by: Mohammed Shafi Shajakhan Signed-off-by: John W. Linville --- drivers/net/wireless/ath/ath9k/recv.c | 174 +++++++++++++++++++++++++--------- 1 file changed, 131 insertions(+), 43 deletions(-) (limited to 'drivers/net/wireless/ath') diff --git a/drivers/net/wireless/ath/ath9k/recv.c b/drivers/net/wireless/ath/ath9k/recv.c index 47e0fc1aaba..2fecfcb7810 100644 --- a/drivers/net/wireless/ath/ath9k/recv.c +++ b/drivers/net/wireless/ath/ath9k/recv.c @@ -1317,49 +1317,138 @@ static void ath_select_ant_div_from_quick_scan(struct ath_ant_comb *antcomb, } } -static void ath_ant_div_conf_fast_divbias(struct ath_hw_antcomb_conf *ant_conf) +static void ath_ant_div_conf_fast_divbias(struct ath_hw_antcomb_conf *ant_conf, + struct ath_ant_comb *antcomb, int alt_ratio) { - /* Adjust the fast_div_bias based on main and alt lna conf */ - switch ((ant_conf->main_lna_conf << 4) | ant_conf->alt_lna_conf) { - case (0x01): /* A-B LNA2 */ - ant_conf->fast_div_bias = 0x3b; - break; - case (0x02): /* A-B LNA1 */ - ant_conf->fast_div_bias = 0x3d; - break; - case (0x03): /* A-B A+B */ - ant_conf->fast_div_bias = 0x1; - break; - case (0x10): /* LNA2 A-B */ - ant_conf->fast_div_bias = 0x7; - break; - case (0x12): /* LNA2 LNA1 */ - ant_conf->fast_div_bias = 0x2; - break; - case (0x13): /* LNA2 A+B */ - ant_conf->fast_div_bias = 0x7; - break; - case (0x20): /* LNA1 A-B */ - ant_conf->fast_div_bias = 0x6; - break; - case (0x21): /* LNA1 LNA2 */ - ant_conf->fast_div_bias = 0x0; - break; - case (0x23): /* LNA1 A+B */ - ant_conf->fast_div_bias = 0x6; - break; - case (0x30): /* A+B A-B */ - ant_conf->fast_div_bias = 0x1; - break; - case (0x31): /* A+B LNA2 */ - ant_conf->fast_div_bias = 0x3b; - break; - case (0x32): /* A+B LNA1 */ - ant_conf->fast_div_bias = 0x3d; - break; - default: - break; + if (ant_conf->div_group == 0) { + /* Adjust the fast_div_bias based on main and alt lna conf */ + switch ((ant_conf->main_lna_conf << 4) | + ant_conf->alt_lna_conf) { + case (0x01): /* A-B LNA2 */ + ant_conf->fast_div_bias = 0x3b; + break; + case (0x02): /* A-B LNA1 */ + ant_conf->fast_div_bias = 0x3d; + break; + case (0x03): /* A-B A+B */ + ant_conf->fast_div_bias = 0x1; + break; + case (0x10): /* LNA2 A-B */ + ant_conf->fast_div_bias = 0x7; + break; + case (0x12): /* LNA2 LNA1 */ + ant_conf->fast_div_bias = 0x2; + break; + case (0x13): /* LNA2 A+B */ + ant_conf->fast_div_bias = 0x7; + break; + case (0x20): /* LNA1 A-B */ + ant_conf->fast_div_bias = 0x6; + break; + case (0x21): /* LNA1 LNA2 */ + ant_conf->fast_div_bias = 0x0; + break; + case (0x23): /* LNA1 A+B */ + ant_conf->fast_div_bias = 0x6; + break; + case (0x30): /* A+B A-B */ + ant_conf->fast_div_bias = 0x1; + break; + case (0x31): /* A+B LNA2 */ + ant_conf->fast_div_bias = 0x3b; + break; + case (0x32): /* A+B LNA1 */ + ant_conf->fast_div_bias = 0x3d; + break; + default: + break; + } + } else if (ant_conf->div_group == 2) { + /* Adjust the fast_div_bias based on main and alt_lna_conf */ + switch ((ant_conf->main_lna_conf << 4) | + ant_conf->alt_lna_conf) { + case (0x01): /* A-B LNA2 */ + ant_conf->fast_div_bias = 0x1; + ant_conf->main_gaintb = 0; + ant_conf->alt_gaintb = 0; + break; + case (0x02): /* A-B LNA1 */ + ant_conf->fast_div_bias = 0x1; + ant_conf->main_gaintb = 0; + ant_conf->alt_gaintb = 0; + break; + case (0x03): /* A-B A+B */ + ant_conf->fast_div_bias = 0x1; + ant_conf->main_gaintb = 0; + ant_conf->alt_gaintb = 0; + break; + case (0x10): /* LNA2 A-B */ + if (!(antcomb->scan) && + (alt_ratio > ATH_ANT_DIV_COMB_ALT_ANT_RATIO)) + ant_conf->fast_div_bias = 0x1; + else + ant_conf->fast_div_bias = 0x2; + ant_conf->main_gaintb = 0; + ant_conf->alt_gaintb = 0; + break; + case (0x12): /* LNA2 LNA1 */ + ant_conf->fast_div_bias = 0x1; + ant_conf->main_gaintb = 0; + ant_conf->alt_gaintb = 0; + break; + case (0x13): /* LNA2 A+B */ + if (!(antcomb->scan) && + (alt_ratio > ATH_ANT_DIV_COMB_ALT_ANT_RATIO)) + ant_conf->fast_div_bias = 0x1; + else + ant_conf->fast_div_bias = 0x2; + ant_conf->main_gaintb = 0; + ant_conf->alt_gaintb = 0; + break; + case (0x20): /* LNA1 A-B */ + if (!(antcomb->scan) && + (alt_ratio > ATH_ANT_DIV_COMB_ALT_ANT_RATIO)) + ant_conf->fast_div_bias = 0x1; + else + ant_conf->fast_div_bias = 0x2; + ant_conf->main_gaintb = 0; + ant_conf->alt_gaintb = 0; + break; + case (0x21): /* LNA1 LNA2 */ + ant_conf->fast_div_bias = 0x1; + ant_conf->main_gaintb = 0; + ant_conf->alt_gaintb = 0; + break; + case (0x23): /* LNA1 A+B */ + if (!(antcomb->scan) && + (alt_ratio > ATH_ANT_DIV_COMB_ALT_ANT_RATIO)) + ant_conf->fast_div_bias = 0x1; + else + ant_conf->fast_div_bias = 0x2; + ant_conf->main_gaintb = 0; + ant_conf->alt_gaintb = 0; + break; + case (0x30): /* A+B A-B */ + ant_conf->fast_div_bias = 0x1; + ant_conf->main_gaintb = 0; + ant_conf->alt_gaintb = 0; + break; + case (0x31): /* A+B LNA2 */ + ant_conf->fast_div_bias = 0x1; + ant_conf->main_gaintb = 0; + ant_conf->alt_gaintb = 0; + break; + case (0x32): /* A+B LNA1 */ + ant_conf->fast_div_bias = 0x1; + ant_conf->main_gaintb = 0; + ant_conf->alt_gaintb = 0; + break; + default: + break; + } + } + } /* Antenna diversity and combining */ @@ -1585,8 +1674,7 @@ static void ath_ant_comb_scan(struct ath_softc *sc, struct ath_rx_status *rs) antcomb->quick_scan_cnt++; div_comb_done: - ath_ant_div_conf_fast_divbias(&div_ant_conf); - + ath_ant_div_conf_fast_divbias(&div_ant_conf, antcomb, alt_ratio); ath9k_hw_antdiv_comb_conf_set(sc->sc_ah, &div_ant_conf); antcomb->scan_start_time = jiffies; -- cgit v1.2.3-70-g09d2 From 21e8ee6d207f6d384689571101436eb9070c22ca Mon Sep 17 00:00:00 2001 From: Mohammed Shafi Shajakhan Date: Fri, 13 May 2011 20:31:40 +0530 Subject: ath9k: make sure main_rssi is positive some times the rssi control descriptor for the main antenna may be negative like that of alternate antenna, hence before incrementing packet counts/rssi of main/alternate antenna make sure both main_rssi and alt_rssi are positive only. this avoids wrong selection of antenna due to diversity Cc: Gabriel Tseng Cc: Senthilkumar Balasubramanian Signed-off-by: Mohammed Shafi Shajakhan Signed-off-by: John W. Linville --- drivers/net/wireless/ath/ath9k/recv.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers/net/wireless/ath') diff --git a/drivers/net/wireless/ath/ath9k/recv.c b/drivers/net/wireless/ath/ath9k/recv.c index 2fecfcb7810..4f52e0429f9 100644 --- a/drivers/net/wireless/ath/ath9k/recv.c +++ b/drivers/net/wireless/ath/ath9k/recv.c @@ -1468,8 +1468,8 @@ static void ath_ant_comb_scan(struct ath_softc *sc, struct ath_rx_status *rs) main_ant_conf = (rs->rs_rssi_ctl2 >> ATH_ANT_RX_MAIN_SHIFT) & ATH_ANT_RX_MASK; - /* Record packet only when alt_rssi is positive */ - if (alt_rssi > 0) { + /* Record packet only when both main_rssi and alt_rssi is positive */ + if (main_rssi > 0 && alt_rssi > 0) { antcomb->total_pkt_count++; antcomb->main_total_rssi += main_rssi; antcomb->alt_total_rssi += alt_rssi; -- cgit v1.2.3-70-g09d2 From 108697c44b8e50bea3505c6bf9667da4627cb2d5 Mon Sep 17 00:00:00 2001 From: Mohammed Shafi Shajakhan Date: Fri, 13 May 2011 20:59:42 +0530 Subject: ath9k: make npending frames check as bool we are not doing anything by tracking the number of pending frames. bail out when we first find a pending frame in any one of the 10 queues. Signed-off-by: Mohammed Shafi Shajakhan Signed-off-by: John W. Linville --- drivers/net/wireless/ath/ath9k/main.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) (limited to 'drivers/net/wireless/ath') diff --git a/drivers/net/wireless/ath/ath9k/main.c b/drivers/net/wireless/ath/ath9k/main.c index 33816091b43..45303bdbc46 100644 --- a/drivers/net/wireless/ath/ath9k/main.c +++ b/drivers/net/wireless/ath/ath9k/main.c @@ -2276,7 +2276,7 @@ static void ath9k_flush(struct ieee80211_hw *hw, bool drop) timeout = 1; for (j = 0; j < timeout; j++) { - int npend = 0; + bool npend = false; if (j) usleep_range(1000, 2000); @@ -2285,7 +2285,10 @@ static void ath9k_flush(struct ieee80211_hw *hw, bool drop) if (!ATH_TXQ_SETUP(sc, i)) continue; - npend += ath9k_has_pending_frames(sc, &sc->tx.txq[i]); + npend = ath9k_has_pending_frames(sc, &sc->tx.txq[i]); + + if (npend) + break; } if (!npend) -- cgit v1.2.3-70-g09d2