From 1a8d122782bdabe4475f29d022c9a0c092ac9878 Mon Sep 17 00:00:00 2001 From: Larry Finger Date: Fri, 14 Dec 2007 13:59:11 +0100 Subject: b43: Fix rfkill radio LED This fixes Bug #9414 Since addition of the rfkill callback, the LED associated with the off switch on the radio has not worked for several reasons: (1) Essential data in the rfkill structure were missing. (2) The rfkill structure was initialized after the LED initialization. (3) There was a minor memory leak if the radio LED structure was inited. Once the above problems were fixed, additional difficulties were noted: (4) The radio LED was in the wrong state at startup. (5) The radio switch had to be manipulated twice for each state change. (6) A circular mutex locking situation existed. (7) If rfkill-input is built as a module, it is not automatically loaded. This patch fixes all of the above. Signed-off-by: Larry Finger Signed-off-by: Michael Buesch Signed-off-by: John W. Linville --- drivers/net/wireless/b43/rfkill.c | 37 ++++++++++++++++++++++++++++++++----- 1 file changed, 32 insertions(+), 5 deletions(-) (limited to 'drivers/net/wireless/b43/rfkill.c') diff --git a/drivers/net/wireless/b43/rfkill.c b/drivers/net/wireless/b43/rfkill.c index 9b1f905ffbf..98cf70c5fd4 100644 --- a/drivers/net/wireless/b43/rfkill.c +++ b/drivers/net/wireless/b43/rfkill.c @@ -25,6 +25,8 @@ #include "rfkill.h" #include "b43.h" +#include + /* Returns TRUE, if the radio is enabled in hardware. */ static bool b43_is_hw_radio_enabled(struct b43_wldev *dev) @@ -50,7 +52,10 @@ static void b43_rfkill_poll(struct input_polled_dev *poll_dev) bool report_change = 0; mutex_lock(&wl->mutex); - B43_WARN_ON(b43_status(dev) < B43_STAT_INITIALIZED); + if (unlikely(b43_status(dev) < B43_STAT_INITIALIZED)) { + mutex_unlock(&wl->mutex); + return; + } enabled = b43_is_hw_radio_enabled(dev); if (unlikely(enabled != dev->radio_hw_enable)) { dev->radio_hw_enable = enabled; @@ -60,8 +65,12 @@ static void b43_rfkill_poll(struct input_polled_dev *poll_dev) } mutex_unlock(&wl->mutex); - if (unlikely(report_change)) - input_report_key(poll_dev->input, KEY_WLAN, enabled); + /* send the radio switch event to the system - note both a key press + * and a release are required */ + if (unlikely(report_change)) { + input_report_key(poll_dev->input, KEY_WLAN, 1); + input_report_key(poll_dev->input, KEY_WLAN, 0); + } } /* Called when the RFKILL toggled in software. */ @@ -69,13 +78,15 @@ static int b43_rfkill_soft_toggle(void *data, enum rfkill_state state) { struct b43_wldev *dev = data; struct b43_wl *wl = dev->wl; - int err = 0; + int err = -EBUSY; if (!wl->rfkill.registered) return 0; mutex_lock(&wl->mutex); - B43_WARN_ON(b43_status(dev) < B43_STAT_INITIALIZED); + if (b43_status(dev) < B43_STAT_INITIALIZED) + goto out_unlock; + err = 0; switch (state) { case RFKILL_STATE_ON: if (!dev->radio_hw_enable) { @@ -133,9 +144,25 @@ void b43_rfkill_init(struct b43_wldev *dev) rfk->poll_dev->poll = b43_rfkill_poll; rfk->poll_dev->poll_interval = 1000; /* msecs */ + rfk->poll_dev->input->name = rfk->name; + rfk->poll_dev->input->id.bustype = BUS_HOST; + rfk->poll_dev->input->id.vendor = dev->dev->bus->boardinfo.vendor; + rfk->poll_dev->input->evbit[0] = BIT(EV_KEY); + set_bit(KEY_WLAN, rfk->poll_dev->input->keybit); + err = rfkill_register(rfk->rfkill); if (err) goto err_free_polldev; + +#ifdef CONFIG_RFKILL_INPUT_MODULE + /* B43 RF-kill isn't useful without the rfkill-input subsystem. + * Try to load the module. */ + err = request_module("rfkill-input"); + if (err) + b43warn(wl, "Failed to load the rfkill-input module. " + "The built-in radio LED will not work.\n"); +#endif /* CONFIG_RFKILL_INPUT */ + err = input_register_polled_device(rfk->poll_dev); if (err) goto err_unreg_rfk; -- cgit v1.2.3-70-g09d2