From 51c7f5eddd0f2e8eb6b49a3025b04148cf3b3912 Mon Sep 17 00:00:00 2001 From: Hante Meuleman Date: Sat, 21 Jun 2014 12:11:15 +0200 Subject: brcmfmac: Change USB probe routine to support Composite USB Some of the USB devices also have Bluetooth inside. These devices can with specific firmware result in a composite USB device. This change will update the driver such that it will also accept the correct interface of composite devices. It is backward compatible with old non-composite USB fw. Reviewed-by: Arend Van Spriel Reviewed-by: Franky (Zhenhui) Lin Reviewed-by: Pieter-Paul Giesberts Reviewed-by: Daniel (Deognyoun) Kim Signed-off-by: Hante Meuleman Signed-off-by: Arend van Spriel Signed-off-by: John W. Linville --- drivers/net/wireless/brcm80211/brcmfmac/usb.c | 204 +++++++++++--------------- 1 file changed, 87 insertions(+), 117 deletions(-) (limited to 'drivers/net/wireless/brcm80211/brcmfmac') diff --git a/drivers/net/wireless/brcm80211/brcmfmac/usb.c b/drivers/net/wireless/brcm80211/brcmfmac/usb.c index d2927acfbd7..839bcda9465 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/usb.c +++ b/drivers/net/wireless/brcm80211/brcmfmac/usb.c @@ -29,33 +29,24 @@ #include "usb_rdl.h" #include "usb.h" -#define IOCTL_RESP_TIMEOUT 2000 +#define IOCTL_RESP_TIMEOUT 2000 #define BRCMF_USB_RESET_GETVER_SPINWAIT 100 /* in unit of ms */ #define BRCMF_USB_RESET_GETVER_LOOP_CNT 10 #define BRCMF_POSTBOOT_ID 0xA123 /* ID to detect if dongle has boot up */ -#define BRCMF_USB_NRXQ 50 -#define BRCMF_USB_NTXQ 50 +#define BRCMF_USB_NRXQ 50 +#define BRCMF_USB_NTXQ 50 -#define CONFIGDESC(usb) (&((usb)->actconfig)->desc) -#define IFPTR(usb, idx) ((usb)->actconfig->interface[(idx)]) -#define IFALTS(usb, idx) (IFPTR((usb), (idx))->altsetting[0]) -#define IFDESC(usb, idx) IFALTS((usb), (idx)).desc -#define IFEPDESC(usb, idx, ep) (IFALTS((usb), (idx)).endpoint[(ep)]).desc +#define BRCMF_USB_CBCTL_WRITE 0 +#define BRCMF_USB_CBCTL_READ 1 +#define BRCMF_USB_MAX_PKT_SIZE 1600 -#define CONTROL_IF 0 -#define BULK_IF 0 - -#define BRCMF_USB_CBCTL_WRITE 0 -#define BRCMF_USB_CBCTL_READ 1 -#define BRCMF_USB_MAX_PKT_SIZE 1600 - -#define BRCMF_USB_43143_FW_NAME "brcm/brcmfmac43143.bin" -#define BRCMF_USB_43236_FW_NAME "brcm/brcmfmac43236b.bin" -#define BRCMF_USB_43242_FW_NAME "brcm/brcmfmac43242a.bin" -#define BRCMF_USB_43569_FW_NAME "brcm/brcmfmac43569.bin" +#define BRCMF_USB_43143_FW_NAME "brcm/brcmfmac43143.bin" +#define BRCMF_USB_43236_FW_NAME "brcm/brcmfmac43236b.bin" +#define BRCMF_USB_43242_FW_NAME "brcm/brcmfmac43242a.bin" +#define BRCMF_USB_43569_FW_NAME "brcm/brcmfmac43569.bin" struct brcmf_usb_image { struct list_head list; @@ -71,7 +62,7 @@ struct brcmf_usbdev_info { struct list_head rx_postq; struct list_head tx_freeq; struct list_head tx_postq; - uint rx_pipe, tx_pipe, rx_pipe2; + uint rx_pipe, tx_pipe; int rx_low_watermark; int tx_low_watermark; @@ -98,6 +89,7 @@ struct brcmf_usbdev_info { int ctl_completed; wait_queue_head_t ioctl_resp_wait; ulong ctl_op; + u8 ifnum; struct urb *bulk_urb; /* used for FW download */ }; @@ -577,7 +569,6 @@ fail: static int brcmf_usb_up(struct device *dev) { struct brcmf_usbdev_info *devinfo = brcmf_usb_get_businfo(dev); - u16 ifnum; brcmf_dbg(USB, "Enter\n"); if (devinfo->bus_pub.state == BRCMFMAC_USB_STATE_UP) @@ -590,21 +581,19 @@ static int brcmf_usb_up(struct device *dev) devinfo->ctl_in_pipe = usb_rcvctrlpipe(devinfo->usbdev, 0); devinfo->ctl_out_pipe = usb_sndctrlpipe(devinfo->usbdev, 0); - ifnum = IFDESC(devinfo->usbdev, CONTROL_IF).bInterfaceNumber; - /* CTL Write */ devinfo->ctl_write.bRequestType = USB_DIR_OUT | USB_TYPE_CLASS | USB_RECIP_INTERFACE; devinfo->ctl_write.bRequest = 0; devinfo->ctl_write.wValue = cpu_to_le16(0); - devinfo->ctl_write.wIndex = cpu_to_le16p(&ifnum); + devinfo->ctl_write.wIndex = cpu_to_le16(devinfo->ifnum); /* CTL Read */ devinfo->ctl_read.bRequestType = USB_DIR_IN | USB_TYPE_CLASS | USB_RECIP_INTERFACE; devinfo->ctl_read.bRequest = 1; devinfo->ctl_read.wValue = cpu_to_le16(0); - devinfo->ctl_read.wIndex = cpu_to_le16p(&ifnum); + devinfo->ctl_read.wIndex = cpu_to_le16(devinfo->ifnum); } brcmf_usb_rx_fill_all(devinfo); return 0; @@ -643,19 +632,19 @@ brcmf_usb_sync_complete(struct urb *urb) brcmf_usb_ioctl_resp_wake(devinfo); } -static bool brcmf_usb_dl_cmd(struct brcmf_usbdev_info *devinfo, u8 cmd, - void *buffer, int buflen) +static int brcmf_usb_dl_cmd(struct brcmf_usbdev_info *devinfo, u8 cmd, + void *buffer, int buflen) { - int ret = 0; + int ret; char *tmpbuf; u16 size; if ((!devinfo) || (devinfo->ctl_urb == NULL)) - return false; + return -EINVAL; tmpbuf = kmalloc(buflen, GFP_ATOMIC); if (!tmpbuf) - return false; + return -ENOMEM; size = buflen; devinfo->ctl_urb->transfer_buffer_length = size; @@ -676,14 +665,16 @@ static bool brcmf_usb_dl_cmd(struct brcmf_usbdev_info *devinfo, u8 cmd, ret = usb_submit_urb(devinfo->ctl_urb, GFP_ATOMIC); if (ret < 0) { brcmf_err("usb_submit_urb failed %d\n", ret); - kfree(tmpbuf); - return false; + goto finalize; } - ret = brcmf_usb_ioctl_resp_wait(devinfo); - memcpy(buffer, tmpbuf, buflen); - kfree(tmpbuf); + if (!brcmf_usb_ioctl_resp_wait(devinfo)) + ret = -ETIMEDOUT; + else + memcpy(buffer, tmpbuf, buflen); +finalize: + kfree(tmpbuf); return ret; } @@ -725,6 +716,7 @@ brcmf_usb_resetcfg(struct brcmf_usbdev_info *devinfo) { struct bootrom_id_le id; u32 loop_cnt; + int err; brcmf_dbg(USB, "Enter\n"); @@ -733,7 +725,9 @@ brcmf_usb_resetcfg(struct brcmf_usbdev_info *devinfo) mdelay(BRCMF_USB_RESET_GETVER_SPINWAIT); loop_cnt++; id.chip = cpu_to_le32(0xDEAD); /* Get the ID */ - brcmf_usb_dl_cmd(devinfo, DL_GETVER, &id, sizeof(id)); + err = brcmf_usb_dl_cmd(devinfo, DL_GETVER, &id, sizeof(id)); + if ((err) && (err != -ETIMEDOUT)) + return err; if (id.chip == cpu_to_le32(BRCMF_POSTBOOT_ID)) break; } while (loop_cnt < BRCMF_USB_RESET_GETVER_LOOP_CNT); @@ -795,8 +789,7 @@ brcmf_usb_dl_writeimage(struct brcmf_usbdev_info *devinfo, u8 *fw, int fwlen) } /* 1) Prepare USB boot loader for runtime image */ - brcmf_usb_dl_cmd(devinfo, DL_START, &state, - sizeof(struct rdl_state_le)); + brcmf_usb_dl_cmd(devinfo, DL_START, &state, sizeof(state)); rdlstate = le32_to_cpu(state.state); rdlbytes = le32_to_cpu(state.bytes); @@ -840,10 +833,10 @@ brcmf_usb_dl_writeimage(struct brcmf_usbdev_info *devinfo, u8 *fw, int fwlen) dlpos += sendlen; sent += sendlen; } - if (!brcmf_usb_dl_cmd(devinfo, DL_GETSTATE, &state, - sizeof(struct rdl_state_le))) { - brcmf_err("DL_GETSTATE Failed xxxx\n"); - err = -EINVAL; + err = brcmf_usb_dl_cmd(devinfo, DL_GETSTATE, &state, + sizeof(state)); + if (err) { + brcmf_err("DL_GETSTATE Failed\n"); goto fail; } @@ -899,13 +892,12 @@ static int brcmf_usb_dlrun(struct brcmf_usbdev_info *devinfo) return -EINVAL; /* Check we are runnable */ - brcmf_usb_dl_cmd(devinfo, DL_GETSTATE, &state, - sizeof(struct rdl_state_le)); + state.state = 0; + brcmf_usb_dl_cmd(devinfo, DL_GETSTATE, &state, sizeof(state)); /* Start the image */ if (state.state == cpu_to_le32(DL_RUNNABLE)) { - if (!brcmf_usb_dl_cmd(devinfo, DL_GO, &state, - sizeof(struct rdl_state_le))) + if (brcmf_usb_dl_cmd(devinfo, DL_GO, &state, sizeof(state))) return -ENODEV; if (brcmf_usb_resetcfg(devinfo)) return -ENODEV; @@ -1228,13 +1220,13 @@ brcmf_usb_disconnect_cb(struct brcmf_usbdev_info *devinfo) static int brcmf_usb_probe(struct usb_interface *intf, const struct usb_device_id *id) { - int ep; - struct usb_endpoint_descriptor *endpoint; - int ret = 0; struct usb_device *usb = interface_to_usbdev(intf); - int num_of_eps; - u8 endpoint_num; struct brcmf_usbdev_info *devinfo; + struct usb_interface_descriptor *desc; + struct usb_endpoint_descriptor *endpoint; + int ret = 0; + u32 num_of_eps; + u8 endpoint_num, ep; brcmf_dbg(USB, "Enter 0x%04x:0x%04x\n", id->idVendor, id->idProduct); @@ -1244,92 +1236,71 @@ brcmf_usb_probe(struct usb_interface *intf, const struct usb_device_id *id) devinfo->usbdev = usb; devinfo->dev = &usb->dev; - usb_set_intfdata(intf, devinfo); /* Check that the device supports only one configuration */ if (usb->descriptor.bNumConfigurations != 1) { - ret = -1; - goto fail; - } - - if (usb->descriptor.bDeviceClass != USB_CLASS_VENDOR_SPEC) { - ret = -1; - goto fail; - } - - /* - * Only the BDC interface configuration is supported: - * Device class: USB_CLASS_VENDOR_SPEC - * if0 class: USB_CLASS_VENDOR_SPEC - * if0/ep0: control - * if0/ep1: bulk in - * if0/ep2: bulk out (ok if swapped with bulk in) - */ - if (CONFIGDESC(usb)->bNumInterfaces != 1) { - ret = -1; + brcmf_err("Number of configurations: %d not supported\n", + usb->descriptor.bNumConfigurations); + ret = -ENODEV; goto fail; } - /* Check interface */ - if (IFDESC(usb, CONTROL_IF).bInterfaceClass != USB_CLASS_VENDOR_SPEC || - IFDESC(usb, CONTROL_IF).bInterfaceSubClass != 2 || - IFDESC(usb, CONTROL_IF).bInterfaceProtocol != 0xff) { - brcmf_err("invalid control interface: class %d, subclass %d, proto %d\n", - IFDESC(usb, CONTROL_IF).bInterfaceClass, - IFDESC(usb, CONTROL_IF).bInterfaceSubClass, - IFDESC(usb, CONTROL_IF).bInterfaceProtocol); - ret = -1; + if ((usb->descriptor.bDeviceClass != USB_CLASS_VENDOR_SPEC) && + (usb->descriptor.bDeviceClass != USB_CLASS_MISC) && + (usb->descriptor.bDeviceClass != USB_CLASS_WIRELESS_CONTROLLER)) { + brcmf_err("Device class: 0x%x not supported\n", + usb->descriptor.bDeviceClass); + ret = -ENODEV; goto fail; } - /* Check control endpoint */ - endpoint = &IFEPDESC(usb, CONTROL_IF, 0); - if ((endpoint->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) - != USB_ENDPOINT_XFER_INT) { - brcmf_err("invalid control endpoint %d\n", - endpoint->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK); - ret = -1; + desc = &intf->altsetting[0].desc; + if ((desc->bInterfaceClass != USB_CLASS_VENDOR_SPEC) || + (desc->bInterfaceSubClass != 2) || + (desc->bInterfaceProtocol != 0xff)) { + brcmf_err("non WLAN interface %d: 0x%x:0x%x:0x%x\n", + desc->bInterfaceNumber, desc->bInterfaceClass, + desc->bInterfaceSubClass, desc->bInterfaceProtocol); + ret = -ENODEV; goto fail; } - devinfo->rx_pipe = 0; - devinfo->rx_pipe2 = 0; - devinfo->tx_pipe = 0; - num_of_eps = IFDESC(usb, BULK_IF).bNumEndpoints - 1; - - /* Check data endpoints and get pipes */ - for (ep = 1; ep <= num_of_eps; ep++) { - endpoint = &IFEPDESC(usb, BULK_IF, ep); - if ((endpoint->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) != - USB_ENDPOINT_XFER_BULK) { - brcmf_err("invalid data endpoint %d\n", ep); - ret = -1; - goto fail; - } - - endpoint_num = endpoint->bEndpointAddress & - USB_ENDPOINT_NUMBER_MASK; - if ((endpoint->bEndpointAddress & USB_ENDPOINT_DIR_MASK) - == USB_DIR_IN) { - if (!devinfo->rx_pipe) { + num_of_eps = desc->bNumEndpoints; + for (ep = 0; ep < num_of_eps; ep++) { + endpoint = &intf->altsetting[0].endpoint[ep].desc; + endpoint_num = usb_endpoint_num(endpoint); + if (!usb_endpoint_xfer_bulk(endpoint)) + continue; + if (usb_endpoint_dir_in(endpoint)) { + if (!devinfo->rx_pipe) devinfo->rx_pipe = usb_rcvbulkpipe(usb, endpoint_num); - } else { - devinfo->rx_pipe2 = - usb_rcvbulkpipe(usb, endpoint_num); - } } else { - devinfo->tx_pipe = usb_sndbulkpipe(usb, endpoint_num); + if (!devinfo->tx_pipe) + devinfo->tx_pipe = + usb_sndbulkpipe(usb, endpoint_num); } } + if (devinfo->rx_pipe == 0) { + brcmf_err("No RX (in) Bulk EP found\n"); + ret = -ENODEV; + goto fail; + } + if (devinfo->tx_pipe == 0) { + brcmf_err("No TX (out) Bulk EP found\n"); + ret = -ENODEV; + goto fail; + } + + devinfo->ifnum = desc->bInterfaceNumber; if (usb->speed == USB_SPEED_SUPER) - brcmf_dbg(USB, "Broadcom super speed USB wireless device detected\n"); + brcmf_dbg(USB, "Broadcom super speed USB WLAN interface detected\n"); else if (usb->speed == USB_SPEED_HIGH) - brcmf_dbg(USB, "Broadcom high speed USB wireless device detected\n"); + brcmf_dbg(USB, "Broadcom high speed USB WLAN interface detected\n"); else - brcmf_dbg(USB, "Broadcom full speed USB wireless device detected\n"); + brcmf_dbg(USB, "Broadcom full speed USB WLAN interface detected\n"); ret = brcmf_usb_probe_cb(devinfo); if (ret) @@ -1339,11 +1310,9 @@ brcmf_usb_probe(struct usb_interface *intf, const struct usb_device_id *id) return 0; fail: - brcmf_err("failed with errno %d\n", ret); kfree(devinfo); usb_set_intfdata(intf, NULL); return ret; - } static void @@ -1388,6 +1357,7 @@ static int brcmf_usb_reset_resume(struct usb_interface *intf) { struct usb_device *usb = interface_to_usbdev(intf); struct brcmf_usbdev_info *devinfo = brcmf_usb_get_businfo(&usb->dev); + brcmf_dbg(USB, "Enter\n"); return brcmf_fw_get_firmwares(&usb->dev, 0, -- cgit v1.2.3-70-g09d2