From 00c5ae2fa0f8191a1b204e71f0ee11359e3b2c06 Mon Sep 17 00:00:00 2001 From: Tomas Winkler Date: Wed, 3 Sep 2008 11:26:42 +0800 Subject: mac80211: change MIMO_PS to SM_PS This patch follows 11n spec naming more rigorously replacing MIMO_PS with SM_PS (Spatial Multiplexing Power Save). (Originally submitted as 4 patches, "mac80211: change MIMO_PS to SM_PS", "iwlwifi: change MIMO_PS to SM_PS", "ath9k: change MIMO_PS to SM_PS", and "iwlwifi: remove double definition of SM PS". -- JWL) Signed-off-by: Ron Rindjunsky Signed-off-by: Tomas Winkler Signed-off-by: Zhu Yi Signed-off-by: John W. Linville --- drivers/net/wireless/iwlwifi/iwl-agn-rs.c | 4 ++-- drivers/net/wireless/iwlwifi/iwl-agn.c | 2 +- drivers/net/wireless/iwlwifi/iwl-core.c | 16 ++++++++-------- drivers/net/wireless/iwlwifi/iwl-dev.h | 5 ----- drivers/net/wireless/iwlwifi/iwl-sta.c | 8 ++++---- 5 files changed, 15 insertions(+), 20 deletions(-) (limited to 'drivers/net/wireless/iwlwifi') diff --git a/drivers/net/wireless/iwlwifi/iwl-agn-rs.c b/drivers/net/wireless/iwlwifi/iwl-agn-rs.c index 98f2c843b99..4fc3a0f1d8f 100644 --- a/drivers/net/wireless/iwlwifi/iwl-agn-rs.c +++ b/drivers/net/wireless/iwlwifi/iwl-agn-rs.c @@ -1153,8 +1153,8 @@ static int rs_switch_to_mimo2(struct iwl_priv *priv, !sta->ht_info.ht_supported) return -1; - if (((sta->ht_info.cap & IEEE80211_HT_CAP_MIMO_PS) >> 2) - == IWL_MIMO_PS_STATIC) + if (((sta->ht_info.cap & IEEE80211_HT_CAP_SM_PS) >> 2) + == WLAN_HT_CAP_SM_PS_STATIC) return -1; /* Need both Tx chains/antennas to support MIMO */ diff --git a/drivers/net/wireless/iwlwifi/iwl-agn.c b/drivers/net/wireless/iwlwifi/iwl-agn.c index 1547122e66f..27ddf6cb1c6 100644 --- a/drivers/net/wireless/iwlwifi/iwl-agn.c +++ b/drivers/net/wireless/iwlwifi/iwl-agn.c @@ -564,7 +564,7 @@ static void iwl4965_ht_conf(struct iwl_priv *priv, if (!iwl_conf->is_ht) return; - priv->ps_mode = (u8)((ht_conf->cap & IEEE80211_HT_CAP_MIMO_PS) >> 2); + priv->ps_mode = (u8)((ht_conf->cap & IEEE80211_HT_CAP_SM_PS) >> 2); if (ht_conf->cap & IEEE80211_HT_CAP_SGI_20) iwl_conf->sgf |= HT_SHORT_GI_20MHZ; diff --git a/drivers/net/wireless/iwlwifi/iwl-core.c b/drivers/net/wireless/iwlwifi/iwl-core.c index a0b86af25c8..789556db684 100644 --- a/drivers/net/wireless/iwlwifi/iwl-core.c +++ b/drivers/net/wireless/iwlwifi/iwl-core.c @@ -399,8 +399,8 @@ static void iwlcore_init_ht_hw_capab(const struct iwl_priv *priv, ht_info->cap |= (u16)IEEE80211_HT_CAP_GRN_FLD; ht_info->cap |= (u16)IEEE80211_HT_CAP_SGI_20; - ht_info->cap |= (u16)(IEEE80211_HT_CAP_MIMO_PS & - (IWL_MIMO_PS_NONE << 2)); + ht_info->cap |= (u16)(IEEE80211_HT_CAP_SM_PS & + (WLAN_HT_CAP_SM_PS_DISABLED << 2)); max_bit_rate = MAX_BIT_RATE_20_MHZ; if (priv->hw_params.fat_channel & BIT(band)) { @@ -709,7 +709,7 @@ static int iwl_get_active_rx_chain_count(struct iwl_priv *priv) bool is_cam = !test_bit(STATUS_POWER_PMI, &priv->status); /* # of Rx chains to use when expecting MIMO. */ - if (is_single || (!is_cam && (priv->ps_mode == IWL_MIMO_PS_STATIC))) + if (is_single || (!is_cam && (priv->ps_mode == WLAN_HT_CAP_SM_PS_STATIC))) return 2; else return 3; @@ -721,14 +721,14 @@ static int iwl_get_idle_rx_chain_count(struct iwl_priv *priv, int active_cnt) bool is_cam = !test_bit(STATUS_POWER_PMI, &priv->status); /* # Rx chains when idling and maybe trying to save power */ switch (priv->ps_mode) { - case IWL_MIMO_PS_STATIC: - case IWL_MIMO_PS_DYNAMIC: + case WLAN_HT_CAP_SM_PS_STATIC: + case WLAN_HT_CAP_SM_PS_DYNAMIC: idle_cnt = (is_cam) ? 2 : 1; break; - case IWL_MIMO_PS_NONE: + case WLAN_HT_CAP_SM_PS_DISABLED: idle_cnt = (is_cam) ? active_cnt : 1; break; - case IWL_MIMO_PS_INVALID: + case WLAN_HT_CAP_SM_PS_INVALID: default: IWL_ERROR("invalide mimo ps mode %d\n", priv->ps_mode); WARN_ON(1); @@ -912,7 +912,7 @@ int iwl_init_drv(struct iwl_priv *priv) priv->iw_mode = IEEE80211_IF_TYPE_STA; priv->use_ant_b_for_management_frame = 1; /* start with ant B */ - priv->ps_mode = IWL_MIMO_PS_NONE; + priv->ps_mode = WLAN_HT_CAP_SM_PS_DISABLED; /* Choose which receivers/antennas to use */ iwl_set_rxon_chain(priv); diff --git a/drivers/net/wireless/iwlwifi/iwl-dev.h b/drivers/net/wireless/iwlwifi/iwl-dev.h index 640ceea913c..f302e93b779 100644 --- a/drivers/net/wireless/iwlwifi/iwl-dev.h +++ b/drivers/net/wireless/iwlwifi/iwl-dev.h @@ -644,11 +644,6 @@ struct iwl_kw { #define IWL_CHANNEL_WIDTH_20MHZ 0 #define IWL_CHANNEL_WIDTH_40MHZ 1 -#define IWL_MIMO_PS_STATIC 0 -#define IWL_MIMO_PS_NONE 3 -#define IWL_MIMO_PS_DYNAMIC 1 -#define IWL_MIMO_PS_INVALID 2 - #define IWL_OPERATION_MODE_AUTO 0 #define IWL_OPERATION_MODE_HT_ONLY 1 #define IWL_OPERATION_MODE_MIXED 2 diff --git a/drivers/net/wireless/iwlwifi/iwl-sta.c b/drivers/net/wireless/iwlwifi/iwl-sta.c index 5b7b05c8773..a72569f1acb 100644 --- a/drivers/net/wireless/iwlwifi/iwl-sta.c +++ b/drivers/net/wireless/iwlwifi/iwl-sta.c @@ -191,20 +191,20 @@ static void iwl_set_ht_add_station(struct iwl_priv *priv, u8 index, if (!sta_ht_inf || !sta_ht_inf->ht_supported) goto done; - mimo_ps_mode = (sta_ht_inf->cap & IEEE80211_HT_CAP_MIMO_PS) >> 2; + mimo_ps_mode = (sta_ht_inf->cap & IEEE80211_HT_CAP_SM_PS) >> 2; sta_flags = priv->stations[index].sta.station_flags; sta_flags &= ~(STA_FLG_RTS_MIMO_PROT_MSK | STA_FLG_MIMO_DIS_MSK); switch (mimo_ps_mode) { - case WLAN_HT_CAP_MIMO_PS_STATIC: + case WLAN_HT_CAP_SM_PS_STATIC: sta_flags |= STA_FLG_MIMO_DIS_MSK; break; - case WLAN_HT_CAP_MIMO_PS_DYNAMIC: + case WLAN_HT_CAP_SM_PS_DYNAMIC: sta_flags |= STA_FLG_RTS_MIMO_PROT_MSK; break; - case WLAN_HT_CAP_MIMO_PS_DISABLED: + case WLAN_HT_CAP_SM_PS_DISABLED: break; default: IWL_WARNING("Invalid MIMO PS mode %d\n", mimo_ps_mode); -- cgit v1.2.3-70-g09d2