From b9b0fdead0e8d964a534e5b09f40d8bd4bf7dfe8 Mon Sep 17 00:00:00 2001
From: Shahar Levi <shahar_levi@ti.com>
Date: Sun, 6 Mar 2011 16:32:06 +0200
Subject: wl12xx: 1281/1283 support - move IRQ polarity

In order to prevent overran of IRQ polarity via FW the polarity setting move after
FW download and before IRQ enable.

Signed-off-by: Shahar Levi <shahar_levi@ti.com>
Reviewed-by: Luciano Coelho <coelho@ti.com>
Signed-off-by: Luciano Coelho <coelho@ti.com>
---
 drivers/net/wireless/wl12xx/boot.c | 14 +++++++-------
 1 file changed, 7 insertions(+), 7 deletions(-)

(limited to 'drivers/net/wireless/wl12xx')

diff --git a/drivers/net/wireless/wl12xx/boot.c b/drivers/net/wireless/wl12xx/boot.c
index 6934dffd517..69fe8703be4 100644
--- a/drivers/net/wireless/wl12xx/boot.c
+++ b/drivers/net/wireless/wl12xx/boot.c
@@ -585,13 +585,6 @@ int wl1271_load_firmware(struct wl1271 *wl)
 	/* 6. read the EEPROM parameters */
 	tmp = wl1271_read32(wl, SCR_PAD2);
 
-	ret = wl1271_boot_write_irq_polarity(wl);
-	if (ret < 0)
-		goto out;
-
-	wl1271_write32(wl, ACX_REG_INTERRUPT_MASK,
-		       WL1271_ACX_ALL_EVENTS_VECTOR);
-
 	/* WL1271: The reference driver skips steps 7 to 10 (jumps directly
 	 * to upload_fw) */
 
@@ -618,6 +611,13 @@ int wl1271_boot(struct wl1271 *wl)
 	if (ret < 0)
 		goto out;
 
+	ret = wl1271_boot_write_irq_polarity(wl);
+	if (ret < 0)
+		goto out;
+
+	wl1271_write32(wl, ACX_REG_INTERRUPT_MASK,
+		       WL1271_ACX_ALL_EVENTS_VECTOR);
+
 	/* Enable firmware interrupts now */
 	wl1271_boot_enable_interrupts(wl);
 
-- 
cgit v1.2.3-70-g09d2


From 5aa42346bba2e385674eb1dd4019dfce4c2ef771 Mon Sep 17 00:00:00 2001
From: Shahar Levi <shahar_levi@ti.com>
Date: Sun, 6 Mar 2011 16:32:07 +0200
Subject: wl12xx: 1281/1283 support - Add Definitions

Definitions to support wl128x:
  - New FW file name
  - Chip ID
  - New PLL Configuration Algorithm macros that will be used at wl128x
    boot stage
  - Rename NVS macro name: wl127x and wl128x are using the same NVS
    file name. However, the ini parameters between them are
    different. The driver will validate the correct NVS size in
    wl1271_boot_upload_nvs().

[Cleaned up some of the definitions. -- Luca]

Signed-off-by: Shahar Levi <shahar_levi@ti.com>
Reviewed-by: Luciano Coelho <coelho@ti.com>
Signed-off-by: Luciano Coelho <coelho@ti.com>
---
 drivers/net/wireless/wl12xx/boot.h      | 48 +++++++++++++++++++++++++++++++++
 drivers/net/wireless/wl12xx/conf.h      |  4 ++-
 drivers/net/wireless/wl12xx/main.c      |  2 +-
 drivers/net/wireless/wl12xx/reg.h       | 15 ++---------
 drivers/net/wireless/wl12xx/sdio.c      |  1 +
 drivers/net/wireless/wl12xx/sdio_test.c |  2 +-
 drivers/net/wireless/wl12xx/spi.c       |  1 +
 drivers/net/wireless/wl12xx/wl12xx.h    |  8 +++++-
 8 files changed, 64 insertions(+), 17 deletions(-)

(limited to 'drivers/net/wireless/wl12xx')

diff --git a/drivers/net/wireless/wl12xx/boot.h b/drivers/net/wireless/wl12xx/boot.h
index 17229b86fc7..1f5ee31dc0b 100644
--- a/drivers/net/wireless/wl12xx/boot.h
+++ b/drivers/net/wireless/wl12xx/boot.h
@@ -74,4 +74,52 @@ struct wl1271_static_data {
 #define FREF_CLK_POLARITY_BITS 0xfffff8ff
 #define CLK_REQ_OUTN_SEL       0x700
 
+/* PLL configuration algorithm for wl128x */
+#define SYS_CLK_CFG_REG              0x2200
+/* Bit[0]   -  0-TCXO,  1-FREF */
+#define MCS_PLL_CLK_SEL_FREF         BIT(0)
+/* Bit[3:2] - 01-TCXO, 10-FREF */
+#define WL_CLK_REQ_TYPE_FREF         BIT(3)
+#define WL_CLK_REQ_TYPE_PG2          (BIT(3) | BIT(2))
+/* Bit[4]   -  0-TCXO,  1-FREF */
+#define PRCM_CM_EN_MUX_WLAN_FREF     BIT(4)
+
+#define TCXO_ILOAD_INT_REG           0x2264
+#define TCXO_CLK_DETECT_REG          0x2266
+
+#define TCXO_DET_FAILED              BIT(4)
+
+#define FREF_ILOAD_INT_REG           0x2084
+#define FREF_CLK_DETECT_REG          0x2086
+#define FREF_CLK_DETECT_FAIL         BIT(4)
+
+/* Use this reg for masking during driver access */
+#define WL_SPARE_REG                 0x2320
+#define WL_SPARE_VAL                 BIT(2)
+/* Bit[6:5:3] -  mask wl write SYS_CLK_CFG[8:5:2:4] */
+#define WL_SPARE_MASK_8526           (BIT(6) | BIT(5) | BIT(3))
+
+#define PLL_LOCK_COUNTERS_REG        0xD8C
+#define PLL_LOCK_COUNTERS_COEX       0x0F
+#define PLL_LOCK_COUNTERS_MCS        0xF0
+#define MCS_PLL_OVERRIDE_REG         0xD90
+#define MCS_PLL_CONFIG_REG           0xD92
+#define MCS_SEL_IN_FREQ_MASK         0x0070
+#define MCS_SEL_IN_FREQ_SHIFT        4
+#define MCS_PLL_CONFIG_REG_VAL       0x73
+
+#define MCS_PLL_M_REG                0xD94
+#define MCS_PLL_N_REG                0xD96
+#define MCS_PLL_M_REG_VAL            0xC8
+#define MCS_PLL_N_REG_VAL            0x07
+
+#define SDIO_IO_DS                   0xd14
+
+/* SDIO/wSPI DS configuration values */
+#define HCI_IO_DS_8MA                0
+#define HCI_IO_DS_4MA                1 /* default */
+#define HCI_IO_DS_6MA                2
+#define HCI_IO_DS_2MA                3
+/* end PLL configuration algorithm for wl128x */
+
 #endif
diff --git a/drivers/net/wireless/wl12xx/conf.h b/drivers/net/wireless/wl12xx/conf.h
index 856a8a2fff4..a00f22c6c74 100644
--- a/drivers/net/wireless/wl12xx/conf.h
+++ b/drivers/net/wireless/wl12xx/conf.h
@@ -1004,7 +1004,9 @@ enum {
 	CONF_REF_CLK_19_2_E,
 	CONF_REF_CLK_26_E,
 	CONF_REF_CLK_38_4_E,
-	CONF_REF_CLK_52_E
+	CONF_REF_CLK_52_E,
+	CONF_REF_CLK_38_4_M_XTAL,
+	CONF_REF_CLK_26_M_XTAL,
 };
 
 enum single_dual_band_enum {
diff --git a/drivers/net/wireless/wl12xx/main.c b/drivers/net/wireless/wl12xx/main.c
index 8b3c8d196b0..b0c49352b56 100644
--- a/drivers/net/wireless/wl12xx/main.c
+++ b/drivers/net/wireless/wl12xx/main.c
@@ -838,7 +838,7 @@ static int wl1271_fetch_nvs(struct wl1271 *wl)
 	const struct firmware *fw;
 	int ret;
 
-	ret = request_firmware(&fw, WL1271_NVS_NAME, wl1271_wl_to_dev(wl));
+	ret = request_firmware(&fw, WL12XX_NVS_NAME, wl1271_wl_to_dev(wl));
 
 	if (ret < 0) {
 		wl1271_error("could not get nvs file: %d", ret);
diff --git a/drivers/net/wireless/wl12xx/reg.h b/drivers/net/wireless/wl12xx/reg.h
index 99096077152..440a4ee9cb4 100644
--- a/drivers/net/wireless/wl12xx/reg.h
+++ b/drivers/net/wireless/wl12xx/reg.h
@@ -207,6 +207,8 @@
 
 #define CHIP_ID_1271_PG10              (0x4030101)
 #define CHIP_ID_1271_PG20              (0x4030111)
+#define CHIP_ID_1283_PG10              (0x05030101)
+#define CHIP_ID_1283_PG20              (0x05030111)
 
 #define ENABLE                         (REGISTERS_BASE + 0x5450)
 
@@ -452,24 +454,11 @@
 #define HI_CFG_UART_TX_OUT_GPIO_14  0x00000200
 #define HI_CFG_UART_TX_OUT_GPIO_7   0x00000400
 
-/*
- * NOTE: USE_ACTIVE_HIGH compilation flag should be defined in makefile
- *       for platforms using active high interrupt level
- */
-#ifdef USE_ACTIVE_HIGH
 #define HI_CFG_DEF_VAL              \
 	(HI_CFG_UART_ENABLE |        \
 	HI_CFG_RST232_ENABLE |      \
 	HI_CFG_CLOCK_REQ_SELECT |   \
 	HI_CFG_HOST_INT_ENABLE)
-#else
-#define HI_CFG_DEF_VAL              \
-	(HI_CFG_UART_ENABLE |        \
-	HI_CFG_RST232_ENABLE |      \
-	HI_CFG_CLOCK_REQ_SELECT |   \
-	HI_CFG_HOST_INT_ENABLE)
-
-#endif
 
 #define REF_FREQ_19_2                       0
 #define REF_FREQ_26_0                       1
diff --git a/drivers/net/wireless/wl12xx/sdio.c b/drivers/net/wireless/wl12xx/sdio.c
index b1c7d031c39..1b6a1adb81a 100644
--- a/drivers/net/wireless/wl12xx/sdio.c
+++ b/drivers/net/wireless/wl12xx/sdio.c
@@ -343,4 +343,5 @@ MODULE_LICENSE("GPL");
 MODULE_AUTHOR("Luciano Coelho <coelho@ti.com>");
 MODULE_AUTHOR("Juuso Oikarinen <juuso.oikarinen@nokia.com>");
 MODULE_FIRMWARE(WL1271_FW_NAME);
+MODULE_FIRMWARE(WL128X_FW_NAME);
 MODULE_FIRMWARE(WL1271_AP_FW_NAME);
diff --git a/drivers/net/wireless/wl12xx/sdio_test.c b/drivers/net/wireless/wl12xx/sdio_test.c
index 9fcbd3dd849..01adf1b1003 100644
--- a/drivers/net/wireless/wl12xx/sdio_test.c
+++ b/drivers/net/wireless/wl12xx/sdio_test.c
@@ -227,7 +227,7 @@ static int wl1271_fetch_nvs(struct wl1271 *wl)
 	const struct firmware *fw;
 	int ret;
 
-	ret = request_firmware(&fw, WL1271_NVS_NAME, wl1271_wl_to_dev(wl));
+	ret = request_firmware(&fw, WL12XX_NVS_NAME, wl1271_wl_to_dev(wl));
 
 	if (ret < 0) {
 		wl1271_error("could not get nvs file: %d", ret);
diff --git a/drivers/net/wireless/wl12xx/spi.c b/drivers/net/wireless/wl12xx/spi.c
index ffc745b17f4..80295f55f23 100644
--- a/drivers/net/wireless/wl12xx/spi.c
+++ b/drivers/net/wireless/wl12xx/spi.c
@@ -490,5 +490,6 @@ MODULE_LICENSE("GPL");
 MODULE_AUTHOR("Luciano Coelho <coelho@ti.com>");
 MODULE_AUTHOR("Juuso Oikarinen <juuso.oikarinen@nokia.com>");
 MODULE_FIRMWARE(WL1271_FW_NAME);
+MODULE_FIRMWARE(WL128X_FW_NAME);
 MODULE_FIRMWARE(WL1271_AP_FW_NAME);
 MODULE_ALIAS("spi:wl1271");
diff --git a/drivers/net/wireless/wl12xx/wl12xx.h b/drivers/net/wireless/wl12xx/wl12xx.h
index 86be83e25ec..a2e899d4e1a 100644
--- a/drivers/net/wireless/wl12xx/wl12xx.h
+++ b/drivers/net/wireless/wl12xx/wl12xx.h
@@ -131,9 +131,15 @@ extern u32 wl12xx_debug_level;
 
 
 #define WL1271_FW_NAME "ti-connectivity/wl1271-fw-2.bin"
+#define WL128X_FW_NAME "ti-connectivity/wl128x-fw.bin"
 #define WL1271_AP_FW_NAME "ti-connectivity/wl1271-fw-ap.bin"
 
-#define WL1271_NVS_NAME "ti-connectivity/wl1271-nvs.bin"
+/*
+ * wl127x and wl128x are using the same NVS file name. However, the
+ * ini parameters between them are different.  The driver validates
+ * the correct NVS size in wl1271_boot_upload_nvs().
+ */
+#define WL12XX_NVS_NAME "ti-connectivity/wl1271-nvs.bin"
 
 #define WL1271_TX_SECURITY_LO16(s) ((u16)((s) & 0xffff))
 #define WL1271_TX_SECURITY_HI32(s) ((u32)(((s) >> 16) & 0xffffffff))
-- 
cgit v1.2.3-70-g09d2


From 48a61477bdc04896bd96d259388a0c42a7019943 Mon Sep 17 00:00:00 2001
From: Shahar Levi <shahar_levi@ti.com>
Date: Sun, 6 Mar 2011 16:32:08 +0200
Subject: wl12xx: 1281/1283 support - Add acx commands

New acx command that sets: Rx fifo enable reduced bus transactions
in RX path. Tx bus transactions padding to SDIO block size that
improve preference in Tx and essential for working with SDIO HS (48Mhz).
The max SDIO block size is 256 when working with Tx bus transactions
padding to SDIO block.

Add new ops to SDIO & SPI that handles the win size change in case of
transactions padding (relevant only for SDIO).

[Fix endianess issues; simplify sdio-specific block_size handling;
minor changes in comments; use "aligned_len" in one calculation
instead of "pad" to avoid confusion -- Luca]

Signed-off-by: Shahar Levi <shahar_levi@ti.com>
Reviewed-by: Luciano Coelho <coelho@ti.com>
Signed-off-by: Luciano Coelho <coelho@ti.com>
---
 drivers/net/wireless/wl12xx/acx.c    | 26 +++++++++++++++
 drivers/net/wireless/wl12xx/acx.h    | 11 +++++++
 drivers/net/wireless/wl12xx/init.c   | 27 +++++++++++++++
 drivers/net/wireless/wl12xx/init.h   |  1 +
 drivers/net/wireless/wl12xx/io.c     | 10 ++++++
 drivers/net/wireless/wl12xx/io.h     |  1 +
 drivers/net/wireless/wl12xx/main.c   |  7 ++++
 drivers/net/wireless/wl12xx/tx.c     | 64 +++++++++++++++++++++++++-----------
 drivers/net/wireless/wl12xx/tx.h     | 46 +++++++++++++++++++++-----
 drivers/net/wireless/wl12xx/wl12xx.h |  3 ++
 10 files changed, 168 insertions(+), 28 deletions(-)

(limited to 'drivers/net/wireless/wl12xx')

diff --git a/drivers/net/wireless/wl12xx/acx.c b/drivers/net/wireless/wl12xx/acx.c
index a3db755ceed..50676b36ad2 100644
--- a/drivers/net/wireless/wl12xx/acx.c
+++ b/drivers/net/wireless/wl12xx/acx.c
@@ -1019,6 +1019,32 @@ out:
 	return ret;
 }
 
+int wl1271_acx_host_if_cfg_bitmap(struct wl1271 *wl, u32 host_cfg_bitmap)
+{
+	struct wl1271_acx_host_config_bitmap *bitmap_conf;
+	int ret;
+
+	bitmap_conf = kzalloc(sizeof(*bitmap_conf), GFP_KERNEL);
+	if (!bitmap_conf) {
+		ret = -ENOMEM;
+		goto out;
+	}
+
+	bitmap_conf->host_cfg_bitmap = cpu_to_le32(host_cfg_bitmap);
+
+	ret = wl1271_cmd_configure(wl, ACX_HOST_IF_CFG_BITMAP,
+				   bitmap_conf, sizeof(*bitmap_conf));
+	if (ret < 0) {
+		wl1271_warning("wl1271 bitmap config opt failed: %d", ret);
+		goto out;
+	}
+
+out:
+	kfree(bitmap_conf);
+
+	return ret;
+}
+
 int wl1271_acx_init_mem_config(struct wl1271 *wl)
 {
 	int ret;
diff --git a/drivers/net/wireless/wl12xx/acx.h b/drivers/net/wireless/wl12xx/acx.h
index dd19b01d807..0a40caeab2a 100644
--- a/drivers/net/wireless/wl12xx/acx.h
+++ b/drivers/net/wireless/wl12xx/acx.h
@@ -939,6 +939,16 @@ struct wl1271_acx_keep_alive_config {
 	u8 padding;
 } __packed;
 
+#define HOST_IF_CFG_RX_FIFO_ENABLE     BIT(0)
+#define HOST_IF_CFG_TX_EXTRA_BLKS_SWAP BIT(1)
+#define HOST_IF_CFG_TX_PAD_TO_SDIO_BLK BIT(3)
+
+struct wl1271_acx_host_config_bitmap {
+	struct acx_header header;
+
+	__le32 host_cfg_bitmap;
+} __packed;
+
 enum {
 	WL1271_ACX_TRIG_TYPE_LEVEL = 0,
 	WL1271_ACX_TRIG_TYPE_EDGE,
@@ -1275,6 +1285,7 @@ int wl1271_acx_tx_config_options(struct wl1271 *wl);
 int wl1271_acx_ap_mem_cfg(struct wl1271 *wl);
 int wl1271_acx_sta_mem_cfg(struct wl1271 *wl);
 int wl1271_acx_init_mem_config(struct wl1271 *wl);
+int wl1271_acx_host_if_cfg_bitmap(struct wl1271 *wl, u32 host_cfg_bitmap);
 int wl1271_acx_init_rx_interrupt(struct wl1271 *wl);
 int wl1271_acx_smart_reflex(struct wl1271 *wl);
 int wl1271_acx_bet_enable(struct wl1271 *wl, bool enable);
diff --git a/drivers/net/wireless/wl12xx/init.c b/drivers/net/wireless/wl12xx/init.c
index 6072fe45713..34c41084bcf 100644
--- a/drivers/net/wireless/wl12xx/init.c
+++ b/drivers/net/wireless/wl12xx/init.c
@@ -31,6 +31,7 @@
 #include "cmd.h"
 #include "reg.h"
 #include "tx.h"
+#include "io.h"
 
 int wl1271_sta_init_templates_config(struct wl1271 *wl)
 {
@@ -504,6 +505,27 @@ static int wl1271_set_ba_policies(struct wl1271 *wl)
 	return ret;
 }
 
+int wl1271_chip_specific_init(struct wl1271 *wl)
+{
+	int ret = 0;
+
+	if (wl->chip.id == CHIP_ID_1283_PG20) {
+		u32 host_cfg_bitmap = HOST_IF_CFG_RX_FIFO_ENABLE;
+
+		if (wl1271_set_block_size(wl))
+			/* Enable SDIO padding */
+			host_cfg_bitmap |= HOST_IF_CFG_TX_PAD_TO_SDIO_BLK;
+
+		/* Must be before wl1271_acx_init_mem_config() */
+		ret = wl1271_acx_host_if_cfg_bitmap(wl, host_cfg_bitmap);
+		if (ret < 0)
+			goto out;
+	}
+out:
+	return ret;
+}
+
+
 int wl1271_hw_init(struct wl1271 *wl)
 {
 	struct conf_tx_ac_category *conf_ac;
@@ -519,6 +541,11 @@ int wl1271_hw_init(struct wl1271 *wl)
 	if (ret < 0)
 		return ret;
 
+	/* Chip-specific init */
+	ret = wl1271_chip_specific_init(wl);
+	if (ret < 0)
+		return ret;
+
 	/* Mode specific init */
 	if (is_ap)
 		ret = wl1271_ap_hw_init(wl);
diff --git a/drivers/net/wireless/wl12xx/init.h b/drivers/net/wireless/wl12xx/init.h
index 3a8bd3f426d..4975270a91a 100644
--- a/drivers/net/wireless/wl12xx/init.h
+++ b/drivers/net/wireless/wl12xx/init.h
@@ -31,6 +31,7 @@ int wl1271_sta_init_templates_config(struct wl1271 *wl);
 int wl1271_init_phy_config(struct wl1271 *wl);
 int wl1271_init_pta(struct wl1271 *wl);
 int wl1271_init_energy_detection(struct wl1271 *wl);
+int wl1271_chip_specific_init(struct wl1271 *wl);
 int wl1271_hw_init(struct wl1271 *wl);
 
 #endif
diff --git a/drivers/net/wireless/wl12xx/io.c b/drivers/net/wireless/wl12xx/io.c
index d557f73e7c1..aa40c98e8fd 100644
--- a/drivers/net/wireless/wl12xx/io.c
+++ b/drivers/net/wireless/wl12xx/io.c
@@ -43,6 +43,16 @@
 #define OCP_STATUS_REQ_FAILED 0x20000
 #define OCP_STATUS_RESP_ERROR 0x30000
 
+bool wl1271_set_block_size(struct wl1271 *wl)
+{
+	if (wl->if_ops->set_block_size) {
+		wl->if_ops->set_block_size(wl);
+		return true;
+	}
+
+	return false;
+}
+
 void wl1271_disable_interrupts(struct wl1271 *wl)
 {
 	wl->if_ops->disable_irq(wl);
diff --git a/drivers/net/wireless/wl12xx/io.h b/drivers/net/wireless/wl12xx/io.h
index c1aac829208..84454f6d816 100644
--- a/drivers/net/wireless/wl12xx/io.h
+++ b/drivers/net/wireless/wl12xx/io.h
@@ -169,5 +169,6 @@ int wl1271_init_ieee80211(struct wl1271 *wl);
 struct ieee80211_hw *wl1271_alloc_hw(void);
 int wl1271_free_hw(struct wl1271 *wl);
 irqreturn_t wl1271_irq(int irq, void *data);
+bool wl1271_set_block_size(struct wl1271 *wl);
 
 #endif
diff --git a/drivers/net/wireless/wl12xx/main.c b/drivers/net/wireless/wl12xx/main.c
index b0c49352b56..f24906f54a7 100644
--- a/drivers/net/wireless/wl12xx/main.c
+++ b/drivers/net/wireless/wl12xx/main.c
@@ -450,6 +450,11 @@ static int wl1271_plt_init(struct wl1271 *wl)
 	if (ret < 0)
 		return ret;
 
+	/* Chip-specific initializations */
+	ret = wl1271_chip_specific_init(wl);
+	if (ret < 0)
+		return ret;
+
 	ret = wl1271_sta_init_templates_config(wl);
 	if (ret < 0)
 		return ret;
@@ -1335,6 +1340,7 @@ static void __wl1271_op_remove_interface(struct wl1271 *wl)
 	memset(wl->ap_hlid_map, 0, sizeof(wl->ap_hlid_map));
 	wl->ap_fw_ps_map = 0;
 	wl->ap_ps_map = 0;
+	wl->block_size = 0;
 
 	for (i = 0; i < NUM_TX_QUEUES; i++)
 		wl->tx_blocks_freed[i] = 0;
@@ -3458,6 +3464,7 @@ struct ieee80211_hw *wl1271_alloc_hw(void)
 	wl->ap_ps_map = 0;
 	wl->ap_fw_ps_map = 0;
 	wl->quirks = 0;
+	wl->block_size = 0;
 
 	memset(wl->tx_frames_map, 0, sizeof(wl->tx_frames_map));
 	for (i = 0; i < ACX_TX_DESCRIPTORS; i++)
diff --git a/drivers/net/wireless/wl12xx/tx.c b/drivers/net/wireless/wl12xx/tx.c
index 5e9ef7d53e7..e296f0a5fe2 100644
--- a/drivers/net/wireless/wl12xx/tx.c
+++ b/drivers/net/wireless/wl12xx/tx.c
@@ -132,6 +132,7 @@ static int wl1271_tx_allocate(struct wl1271 *wl, struct sk_buff *skb, u32 extra,
 {
 	struct wl1271_tx_hw_descr *desc;
 	u32 total_len = skb->len + sizeof(struct wl1271_tx_hw_descr) + extra;
+	u32 len;
 	u32 total_blocks;
 	int id, ret = -EBUSY;
 
@@ -145,14 +146,20 @@ static int wl1271_tx_allocate(struct wl1271 *wl, struct sk_buff *skb, u32 extra,
 
 	/* approximate the number of blocks required for this packet
 	   in the firmware */
-	total_blocks = total_len + TX_HW_BLOCK_SIZE - 1;
-	total_blocks = total_blocks / TX_HW_BLOCK_SIZE + TX_HW_BLOCK_SPARE;
+	if (wl->block_size)
+		len = ALIGN(total_len, wl->block_size);
+	else
+		len = total_len;
+
+	total_blocks = (len + TX_HW_BLOCK_SIZE - 1) / TX_HW_BLOCK_SIZE +
+		TX_HW_BLOCK_SPARE;
+
 	if (total_blocks <= wl->tx_blocks_available) {
 		desc = (struct wl1271_tx_hw_descr *)skb_push(
 			skb, total_len - skb->len);
 
-		desc->extra_mem_blocks = TX_HW_BLOCK_SPARE;
-		desc->total_mem_blocks = total_blocks;
+		desc->wl127x_mem.extra_blocks = TX_HW_BLOCK_SPARE;
+		desc->wl127x_mem.total_mem_blocks = total_blocks;
 		desc->id = id;
 
 		wl->tx_blocks_available -= total_blocks;
@@ -178,7 +185,7 @@ static void wl1271_tx_fill_hdr(struct wl1271 *wl, struct sk_buff *skb,
 {
 	struct timespec ts;
 	struct wl1271_tx_hw_descr *desc;
-	int pad, ac, rate_idx;
+	int aligned_len, ac, rate_idx;
 	s64 hosttime;
 	u16 tx_attr;
 
@@ -237,20 +244,32 @@ static void wl1271_tx_fill_hdr(struct wl1271 *wl, struct sk_buff *skb,
 	tx_attr |= rate_idx << TX_HW_ATTR_OFST_RATE_POLICY;
 	desc->reserved = 0;
 
-	/* align the length (and store in terms of words) */
-	pad = ALIGN(skb->len, WL1271_TX_ALIGN_TO);
-	desc->length = cpu_to_le16(pad >> 2);
+	if (wl->block_size) {
+		aligned_len = ALIGN(skb->len, wl->block_size);
+
+		desc->wl128x_mem.extra_bytes = aligned_len - skb->len;
+		desc->length = cpu_to_le16(aligned_len >> 2);
+	} else {
+		int pad;
+
+		/* align the length (and store in terms of words) */
+		aligned_len = ALIGN(skb->len, WL1271_TX_ALIGN_TO);
+		desc->length = cpu_to_le16(aligned_len >> 2);
+
+		/* calculate number of padding bytes */
+		pad = aligned_len - skb->len;
+		tx_attr |= pad << TX_HW_ATTR_OFST_LAST_WORD_PAD;
 
-	/* calculate number of padding bytes */
-	pad = pad - skb->len;
-	tx_attr |= pad << TX_HW_ATTR_OFST_LAST_WORD_PAD;
+		wl1271_debug(DEBUG_TX, "tx_fill_hdr: padding: %d", pad);
+	}
 
 	desc->tx_attr = cpu_to_le16(tx_attr);
 
-	wl1271_debug(DEBUG_TX, "tx_fill_hdr: pad: %d hlid: %d "
-		"tx_attr: 0x%x len: %d life: %d mem: %d", pad, desc->hlid,
-		le16_to_cpu(desc->tx_attr), le16_to_cpu(desc->length),
-		le16_to_cpu(desc->life_time), desc->total_mem_blocks);
+	wl1271_debug(DEBUG_TX, "tx_fill_hdr: hlid: %d tx_attr: 0x%x "
+		     "len: %d life: %d mem: %d",
+		     desc->hlid, le16_to_cpu(desc->tx_attr),
+		     le16_to_cpu(desc->length),	le16_to_cpu(desc->life_time),
+		     desc->wl127x_mem.total_mem_blocks);
 }
 
 /* caller must hold wl->mutex */
@@ -305,11 +324,18 @@ static int wl1271_prepare_tx_frame(struct wl1271 *wl, struct sk_buff *skb,
 	wl1271_tx_fill_hdr(wl, skb, extra, info, hlid);
 
 	/*
-	 * The length of each packet is stored in terms of words. Thus, we must
-	 * pad the skb data to make sure its length is aligned.
-	 * The number of padding bytes is computed and set in wl1271_tx_fill_hdr
+	 * The length of each packet is stored in terms of
+	 * words. Thus, we must pad the skb data to make sure its
+	 * length is aligned.  The number of padding bytes is computed
+	 * and set in wl1271_tx_fill_hdr.
+	 * In special cases, we want to align to a specific block size
+	 * (eg. for wl128x with SDIO we align to 256).
 	 */
-	total_len = ALIGN(skb->len, WL1271_TX_ALIGN_TO);
+	if (wl->block_size)
+		total_len = ALIGN(skb->len, wl->block_size);
+	else
+		total_len = ALIGN(skb->len, WL1271_TX_ALIGN_TO);
+
 	memcpy(wl->aggr_buf + buf_offset, skb->data, skb->len);
 	memset(wl->aggr_buf + buf_offset + skb->len, 0, total_len - skb->len);
 
diff --git a/drivers/net/wireless/wl12xx/tx.h b/drivers/net/wireless/wl12xx/tx.h
index 02f07fa66e8..e31317717ab 100644
--- a/drivers/net/wireless/wl12xx/tx.h
+++ b/drivers/net/wireless/wl12xx/tx.h
@@ -55,20 +55,48 @@
 #define WL1271_TX_ALIGN_TO 4
 #define WL1271_TKIP_IV_SPACE 4
 
+struct wl127x_tx_mem {
+	/*
+	 * Number of extra memory blocks to allocate for this packet
+	 * in addition to the number of blocks derived from the packet
+	 * length.
+	 */
+	u8 extra_blocks;
+	/*
+	 * Total number of memory blocks allocated by the host for
+	 * this packet. Must be equal or greater than the actual
+	 * blocks number allocated by HW.
+	 */
+	u8 total_mem_blocks;
+} __packed;
+
+struct wl128x_tx_mem {
+	/*
+	 * Total number of memory blocks allocated by the host for
+	 * this packet.
+	 */
+	u8 total_mem_blocks;
+	/*
+	 * Number of extra bytes, at the end of the frame. the host
+	 * uses this padding to complete each frame to integer number
+	 * of SDIO blocks.
+	 */
+	u8 extra_bytes;
+} __packed;
+
 struct wl1271_tx_hw_descr {
 	/* Length of packet in words, including descriptor+header+data */
 	__le16 length;
-	/* Number of extra memory blocks to allocate for this packet in
-	   addition to the number of blocks derived from the packet length */
-	u8 extra_mem_blocks;
-	/* Total number of memory blocks allocated by the host for this packet.
-	   Must be equal or greater than the actual blocks number allocated by
-	   HW!! */
-	u8 total_mem_blocks;
+	union {
+		struct wl127x_tx_mem wl127x_mem;
+		struct wl128x_tx_mem wl128x_mem;
+	} __packed;
 	/* Device time (in us) when the packet arrived to the driver */
 	__le32 start_time;
-	/* Max delay in TUs until transmission. The last device time the
-	   packet can be transmitted is: startTime+(1024*LifeTime) */
+	/*
+	 * Max delay in TUs until transmission. The last device time the
+	 * packet can be transmitted is: start_time + (1024 * life_time)
+	 */
 	__le16 life_time;
 	/* Bitwise fields - see TX_ATTR... definitions above. */
 	__le16 tx_attr;
diff --git a/drivers/net/wireless/wl12xx/wl12xx.h b/drivers/net/wireless/wl12xx/wl12xx.h
index a2e899d4e1a..959b338d0af 100644
--- a/drivers/net/wireless/wl12xx/wl12xx.h
+++ b/drivers/net/wireless/wl12xx/wl12xx.h
@@ -303,6 +303,7 @@ struct wl1271_if_operations {
 	struct device* (*dev)(struct wl1271 *wl);
 	void (*enable_irq)(struct wl1271 *wl);
 	void (*disable_irq)(struct wl1271 *wl);
+	void (*set_block_size) (struct wl1271 *wl);
 };
 
 #define MAX_NUM_KEYS 14
@@ -533,6 +534,8 @@ struct wl1271 {
 	bool ba_support;
 	u8 ba_rx_bitmap;
 
+	u32 block_size;
+
 	/*
 	 * AP-mode - links indexed by HLID. The global and broadcast links
 	 * are always active.
-- 
cgit v1.2.3-70-g09d2


From a81159edf8d64011933df177ec42f82d7896a0c7 Mon Sep 17 00:00:00 2001
From: Luciano Coelho <coelho@ti.com>
Date: Mon, 14 Mar 2011 14:05:13 +0200
Subject: wl12xx: 1281/1283 support - add block size handling for sdio and spi

Add the the set_block_size op in the SDIO and in the SPI modules.
Since it is only used with SDIO, just explicitly set the op to NULL in
spi.c

Signed-off-by: Luciano Coelho <coelho@ti.com>
---
 drivers/net/wireless/wl12xx/sdio.c | 18 +++++++++++++++++-
 drivers/net/wireless/wl12xx/spi.c  |  3 ++-
 2 files changed, 19 insertions(+), 2 deletions(-)

(limited to 'drivers/net/wireless/wl12xx')

diff --git a/drivers/net/wireless/wl12xx/sdio.c b/drivers/net/wireless/wl12xx/sdio.c
index 1b6a1adb81a..7491b3d8487 100644
--- a/drivers/net/wireless/wl12xx/sdio.c
+++ b/drivers/net/wireless/wl12xx/sdio.c
@@ -51,6 +51,18 @@ static const struct sdio_device_id wl1271_devices[] = {
 };
 MODULE_DEVICE_TABLE(sdio, wl1271_devices);
 
+/* The max SDIO block size is 256 when working with tx padding to SDIO block */
+#define TX_PAD_SDIO_BLK_SIZE                  256
+
+static void wl1271_sdio_set_block_size(struct wl1271 *wl)
+{
+	wl->block_size = TX_PAD_SDIO_BLK_SIZE;
+
+	sdio_claim_host(wl->if_priv);
+	sdio_set_block_size(wl->if_priv, TX_PAD_SDIO_BLK_SIZE);
+	sdio_release_host(wl->if_priv);
+}
+
 static inline struct sdio_func *wl_to_func(struct wl1271 *wl)
 {
 	return wl->if_priv;
@@ -166,6 +178,9 @@ static int wl1271_sdio_power_on(struct wl1271 *wl)
 	sdio_claim_host(func);
 	sdio_enable_func(func);
 
+	/* Set the default block size in case it was modified */
+	sdio_set_block_size(func, 0);
+
 out:
 	return ret;
 }
@@ -203,7 +218,8 @@ static struct wl1271_if_operations sdio_ops = {
 	.power		= wl1271_sdio_set_power,
 	.dev		= wl1271_sdio_wl_to_dev,
 	.enable_irq	= wl1271_sdio_enable_interrupts,
-	.disable_irq	= wl1271_sdio_disable_interrupts
+	.disable_irq	= wl1271_sdio_disable_interrupts,
+	.set_block_size = wl1271_sdio_set_block_size,
 };
 
 static int __devinit wl1271_probe(struct sdio_func *func,
diff --git a/drivers/net/wireless/wl12xx/spi.c b/drivers/net/wireless/wl12xx/spi.c
index 80295f55f23..bfb1171176c 100644
--- a/drivers/net/wireless/wl12xx/spi.c
+++ b/drivers/net/wireless/wl12xx/spi.c
@@ -355,7 +355,8 @@ static struct wl1271_if_operations spi_ops = {
 	.power		= wl1271_spi_set_power,
 	.dev		= wl1271_spi_wl_to_dev,
 	.enable_irq	= wl1271_spi_enable_interrupts,
-	.disable_irq	= wl1271_spi_disable_interrupts
+	.disable_irq	= wl1271_spi_disable_interrupts,
+	.set_block_size = NULL,
 };
 
 static int __devinit wl1271_probe(struct spi_device *spi)
-- 
cgit v1.2.3-70-g09d2


From 49d750ca14cd49e76ab039b33b5a621e0a92b9fd Mon Sep 17 00:00:00 2001
From: Shahar Levi <shahar_levi@ti.com>
Date: Sun, 6 Mar 2011 16:32:09 +0200
Subject: wl12xx: 1281/1283 support - New radio structs and functions

New general and radio parameters structures and functions.
Implemented as separate functions due to auto-detection
between wl127x and wl128x.

Signed-off-by: Shahar Levi <shahar_levi@ti.com>
Reviewed-by: Luciano Coelho <coelho@ti.com>
Signed-off-by: Luciano Coelho <coelho@ti.com>
---
 drivers/net/wireless/wl12xx/cmd.c  | 86 +++++++++++++++++++++++++++++++++-
 drivers/net/wireless/wl12xx/cmd.h  | 34 ++++++++++++++
 drivers/net/wireless/wl12xx/ini.h  | 96 +++++++++++++++++++++++++++++++++++++-
 drivers/net/wireless/wl12xx/init.c | 18 +++++--
 drivers/net/wireless/wl12xx/main.c | 16 +++++--
 5 files changed, 240 insertions(+), 10 deletions(-)

(limited to 'drivers/net/wireless/wl12xx')

diff --git a/drivers/net/wireless/wl12xx/cmd.c b/drivers/net/wireless/wl12xx/cmd.c
index f0aa7ab97bf..37eb9f36694 100644
--- a/drivers/net/wireless/wl12xx/cmd.c
+++ b/drivers/net/wireless/wl12xx/cmd.c
@@ -110,7 +110,47 @@ out:
 int wl1271_cmd_general_parms(struct wl1271 *wl)
 {
 	struct wl1271_general_parms_cmd *gen_parms;
-	struct wl1271_ini_general_params *gp = &wl->nvs->general_params;
+	struct wl1271_ini_general_params *gp =
+		&((struct wl1271_nvs_file *)wl->nvs)->general_params;
+	bool answer = false;
+	int ret;
+
+	if (!wl->nvs)
+		return -ENODEV;
+
+	gen_parms = kzalloc(sizeof(*gen_parms), GFP_KERNEL);
+	if (!gen_parms)
+		return -ENOMEM;
+
+	gen_parms->test.id = TEST_CMD_INI_FILE_GENERAL_PARAM;
+
+	memcpy(&gen_parms->general_params, gp, sizeof(*gp));
+
+	if (gp->tx_bip_fem_auto_detect)
+		answer = true;
+
+	ret = wl1271_cmd_test(wl, gen_parms, sizeof(*gen_parms), answer);
+	if (ret < 0) {
+		wl1271_warning("CMD_INI_FILE_GENERAL_PARAM failed");
+		goto out;
+	}
+
+	gp->tx_bip_fem_manufacturer =
+		gen_parms->general_params.tx_bip_fem_manufacturer;
+
+	wl1271_debug(DEBUG_CMD, "FEM autodetect: %s, manufacturer: %d\n",
+		     answer ? "auto" : "manual", gp->tx_bip_fem_manufacturer);
+
+out:
+	kfree(gen_parms);
+	return ret;
+}
+
+int wl128x_cmd_general_parms(struct wl1271 *wl)
+{
+	struct wl128x_general_parms_cmd *gen_parms;
+	struct wl128x_ini_general_params *gp =
+		&((struct wl128x_nvs_file *)wl->nvs)->general_params;
 	bool answer = false;
 	int ret;
 
@@ -186,6 +226,50 @@ int wl1271_cmd_radio_parms(struct wl1271 *wl)
 	return ret;
 }
 
+int wl128x_cmd_radio_parms(struct wl1271 *wl)
+{
+	struct wl128x_nvs_file *nvs = (struct wl128x_nvs_file *)wl->nvs;
+	struct wl128x_radio_parms_cmd *radio_parms;
+	struct wl128x_ini_general_params *gp = &nvs->general_params;
+	int ret;
+
+	if (!wl->nvs)
+		return -ENODEV;
+
+	radio_parms = kzalloc(sizeof(*radio_parms), GFP_KERNEL);
+	if (!radio_parms)
+		return -ENOMEM;
+
+	radio_parms->test.id = TEST_CMD_INI_FILE_RADIO_PARAM;
+
+	/* 2.4GHz parameters */
+	memcpy(&radio_parms->static_params_2, &nvs->stat_radio_params_2,
+	       sizeof(struct wl128x_ini_band_params_2));
+	memcpy(&radio_parms->dyn_params_2,
+	       &nvs->dyn_radio_params_2[gp->tx_bip_fem_manufacturer].params,
+	       sizeof(struct wl128x_ini_fem_params_2));
+
+	/* 5GHz parameters */
+	memcpy(&radio_parms->static_params_5,
+	       &nvs->stat_radio_params_5,
+	       sizeof(struct wl128x_ini_band_params_5));
+	memcpy(&radio_parms->dyn_params_5,
+	       &nvs->dyn_radio_params_5[gp->tx_bip_fem_manufacturer].params,
+	       sizeof(struct wl128x_ini_fem_params_5));
+
+	radio_parms->fem_vendor_and_options = nvs->fem_vendor_and_options;
+
+	wl1271_dump(DEBUG_CMD, "TEST_CMD_INI_FILE_RADIO_PARAM: ",
+		    radio_parms, sizeof(*radio_parms));
+
+	ret = wl1271_cmd_test(wl, radio_parms, sizeof(*radio_parms), 0);
+	if (ret < 0)
+		wl1271_warning("CMD_INI_FILE_RADIO_PARAM failed");
+
+	kfree(radio_parms);
+	return ret;
+}
+
 int wl1271_cmd_ext_radio_parms(struct wl1271 *wl)
 {
 	struct wl1271_ext_radio_parms_cmd *ext_radio_parms;
diff --git a/drivers/net/wireless/wl12xx/cmd.h b/drivers/net/wireless/wl12xx/cmd.h
index 54c12e71417..5cac95d9480 100644
--- a/drivers/net/wireless/wl12xx/cmd.h
+++ b/drivers/net/wireless/wl12xx/cmd.h
@@ -32,7 +32,9 @@ struct acx_header;
 int wl1271_cmd_send(struct wl1271 *wl, u16 id, void *buf, size_t len,
 		    size_t res_len);
 int wl1271_cmd_general_parms(struct wl1271 *wl);
+int wl128x_cmd_general_parms(struct wl1271 *wl);
 int wl1271_cmd_radio_parms(struct wl1271 *wl);
+int wl128x_cmd_radio_parms(struct wl1271 *wl);
 int wl1271_cmd_ext_radio_parms(struct wl1271 *wl);
 int wl1271_cmd_join(struct wl1271 *wl, u8 bss_type);
 int wl1271_cmd_test(struct wl1271 *wl, void *buf, size_t buf_len, u8 answer);
@@ -415,6 +417,21 @@ struct wl1271_general_parms_cmd {
 	u8 padding[3];
 } __packed;
 
+struct wl128x_general_parms_cmd {
+	struct wl1271_cmd_header header;
+
+	struct wl1271_cmd_test_header test;
+
+	struct wl128x_ini_general_params general_params;
+
+	u8 sr_debug_table[WL1271_INI_MAX_SMART_REFLEX_PARAM];
+	u8 sr_sen_n_p;
+	u8 sr_sen_n_p_gain;
+	u8 sr_sen_nrn;
+	u8 sr_sen_prn;
+	u8 padding[3];
+} __packed;
+
 struct wl1271_radio_parms_cmd {
 	struct wl1271_cmd_header header;
 
@@ -431,6 +448,23 @@ struct wl1271_radio_parms_cmd {
 	u8 padding3[2];
 } __packed;
 
+struct wl128x_radio_parms_cmd {
+	struct wl1271_cmd_header header;
+
+	struct wl1271_cmd_test_header test;
+
+	/* Static radio parameters */
+	struct wl128x_ini_band_params_2 static_params_2;
+	struct wl128x_ini_band_params_5 static_params_5;
+
+	u8 fem_vendor_and_options;
+
+	/* Dynamic radio parameters */
+	struct wl128x_ini_fem_params_2 dyn_params_2;
+	u8 padding2;
+	struct wl128x_ini_fem_params_5 dyn_params_5;
+} __packed;
+
 struct wl1271_ext_radio_parms_cmd {
 	struct wl1271_cmd_header header;
 
diff --git a/drivers/net/wireless/wl12xx/ini.h b/drivers/net/wireless/wl12xx/ini.h
index c330a2583df..30efcd6643b 100644
--- a/drivers/net/wireless/wl12xx/ini.h
+++ b/drivers/net/wireless/wl12xx/ini.h
@@ -41,6 +41,28 @@ struct wl1271_ini_general_params {
 	u8 srf3[WL1271_INI_MAX_SMART_REFLEX_PARAM];
 } __packed;
 
+#define WL128X_INI_MAX_SETTINGS_PARAM 4
+
+struct wl128x_ini_general_params {
+	u8 ref_clock;
+	u8 settling_time;
+	u8 clk_valid_on_wakeup;
+	u8 tcxo_ref_clock;
+	u8 tcxo_settling_time;
+	u8 tcxo_valid_on_wakeup;
+	u8 tcxo_ldo_voltage;
+	u8 xtal_itrim_val;
+	u8 platform_conf;
+	u8 dual_mode_select;
+	u8 tx_bip_fem_auto_detect;
+	u8 tx_bip_fem_manufacturer;
+	u8 general_settings[WL128X_INI_MAX_SETTINGS_PARAM];
+	u8 sr_state;
+	u8 srf1[WL1271_INI_MAX_SMART_REFLEX_PARAM];
+	u8 srf2[WL1271_INI_MAX_SMART_REFLEX_PARAM];
+	u8 srf3[WL1271_INI_MAX_SMART_REFLEX_PARAM];
+} __packed;
+
 #define WL1271_INI_RSSI_PROCESS_COMPENS_SIZE 15
 
 struct wl1271_ini_band_params_2 {
@@ -49,9 +71,16 @@ struct wl1271_ini_band_params_2 {
 	u8 rx_rssi_process_compens[WL1271_INI_RSSI_PROCESS_COMPENS_SIZE];
 } __packed;
 
-#define WL1271_INI_RATE_GROUP_COUNT 6
 #define WL1271_INI_CHANNEL_COUNT_2 14
 
+struct wl128x_ini_band_params_2 {
+	u8 rx_trace_insertion_loss;
+	u8 tx_trace_loss[WL1271_INI_CHANNEL_COUNT_2];
+	u8 rx_rssi_process_compens[WL1271_INI_RSSI_PROCESS_COMPENS_SIZE];
+} __packed;
+
+#define WL1271_INI_RATE_GROUP_COUNT 6
+
 struct wl1271_ini_fem_params_2 {
 	__le16 tx_bip_ref_pd_voltage;
 	u8 tx_bip_ref_power;
@@ -68,6 +97,28 @@ struct wl1271_ini_fem_params_2 {
 	u8 normal_to_degraded_high_thr;
 } __packed;
 
+#define WL128X_INI_RATE_GROUP_COUNT 7
+/* low and high temperatures */
+#define WL128X_INI_PD_VS_TEMPERATURE_RANGES 2
+
+struct wl128x_ini_fem_params_2 {
+	__le16 tx_bip_ref_pd_voltage;
+	u8 tx_bip_ref_power;
+	u8 tx_bip_ref_offset;
+	u8 tx_per_rate_pwr_limits_normal[WL128X_INI_RATE_GROUP_COUNT];
+	u8 tx_per_rate_pwr_limits_degraded[WL128X_INI_RATE_GROUP_COUNT];
+	u8 tx_per_rate_pwr_limits_extreme[WL128X_INI_RATE_GROUP_COUNT];
+	u8 tx_per_chan_pwr_limits_11b[WL1271_INI_CHANNEL_COUNT_2];
+	u8 tx_per_chan_pwr_limits_ofdm[WL1271_INI_CHANNEL_COUNT_2];
+	u8 tx_pd_vs_rate_offsets[WL128X_INI_RATE_GROUP_COUNT];
+	u8 tx_ibias[WL128X_INI_RATE_GROUP_COUNT + 1];
+	u8 tx_pd_vs_chan_offsets[WL1271_INI_CHANNEL_COUNT_2];
+	u8 tx_pd_vs_temperature[WL128X_INI_PD_VS_TEMPERATURE_RANGES];
+	u8 rx_fem_insertion_loss;
+	u8 degraded_low_to_normal_thr;
+	u8 normal_to_degraded_high_thr;
+} __packed;
+
 #define WL1271_INI_CHANNEL_COUNT_5 35
 #define WL1271_INI_SUB_BAND_COUNT_5 7
 
@@ -77,6 +128,12 @@ struct wl1271_ini_band_params_5 {
 	u8 rx_rssi_process_compens[WL1271_INI_RSSI_PROCESS_COMPENS_SIZE];
 } __packed;
 
+struct wl128x_ini_band_params_5 {
+	u8 rx_trace_insertion_loss[WL1271_INI_SUB_BAND_COUNT_5];
+	u8 tx_trace_loss[WL1271_INI_CHANNEL_COUNT_5];
+	u8 rx_rssi_process_compens[WL1271_INI_RSSI_PROCESS_COMPENS_SIZE];
+} __packed;
+
 struct wl1271_ini_fem_params_5 {
 	__le16 tx_bip_ref_pd_voltage[WL1271_INI_SUB_BAND_COUNT_5];
 	u8 tx_bip_ref_power[WL1271_INI_SUB_BAND_COUNT_5];
@@ -92,6 +149,23 @@ struct wl1271_ini_fem_params_5 {
 	u8 normal_to_degraded_high_thr;
 } __packed;
 
+struct wl128x_ini_fem_params_5 {
+	__le16 tx_bip_ref_pd_voltage[WL1271_INI_SUB_BAND_COUNT_5];
+	u8 tx_bip_ref_power[WL1271_INI_SUB_BAND_COUNT_5];
+	u8 tx_bip_ref_offset[WL1271_INI_SUB_BAND_COUNT_5];
+	u8 tx_per_rate_pwr_limits_normal[WL128X_INI_RATE_GROUP_COUNT];
+	u8 tx_per_rate_pwr_limits_degraded[WL128X_INI_RATE_GROUP_COUNT];
+	u8 tx_per_rate_pwr_limits_extreme[WL128X_INI_RATE_GROUP_COUNT];
+	u8 tx_per_chan_pwr_limits_ofdm[WL1271_INI_CHANNEL_COUNT_5];
+	u8 tx_pd_vs_rate_offsets[WL128X_INI_RATE_GROUP_COUNT];
+	u8 tx_ibias[WL128X_INI_RATE_GROUP_COUNT];
+	u8 tx_pd_vs_chan_offsets[WL1271_INI_CHANNEL_COUNT_5];
+	u8 tx_pd_vs_temperature[WL1271_INI_SUB_BAND_COUNT_5 *
+		WL128X_INI_PD_VS_TEMPERATURE_RANGES];
+	u8 rx_fem_insertion_loss[WL1271_INI_SUB_BAND_COUNT_5];
+	u8 degraded_low_to_normal_thr;
+	u8 normal_to_degraded_high_thr;
+} __packed;
 
 /* NVS data structure */
 #define WL1271_INI_NVS_SECTION_SIZE		     468
@@ -120,4 +194,24 @@ struct wl1271_nvs_file {
 	} dyn_radio_params_5[WL1271_INI_FEM_MODULE_COUNT];
 } __packed;
 
+struct wl128x_nvs_file {
+	/* NVS section */
+	u8 nvs[WL1271_INI_NVS_SECTION_SIZE];
+
+	/* INI section */
+	struct wl128x_ini_general_params general_params;
+	u8 fem_vendor_and_options;
+	struct wl128x_ini_band_params_2 stat_radio_params_2;
+	u8 padding2;
+	struct {
+		struct wl128x_ini_fem_params_2 params;
+		u8 padding;
+	} dyn_radio_params_2[WL1271_INI_FEM_MODULE_COUNT];
+	struct wl128x_ini_band_params_5 stat_radio_params_5;
+	u8 padding3;
+	struct {
+		struct wl128x_ini_fem_params_5 params;
+		u8 padding;
+	} dyn_radio_params_5[WL1271_INI_FEM_MODULE_COUNT];
+} __packed;
 #endif
diff --git a/drivers/net/wireless/wl12xx/init.c b/drivers/net/wireless/wl12xx/init.c
index 34c41084bcf..2dbc08331ca 100644
--- a/drivers/net/wireless/wl12xx/init.c
+++ b/drivers/net/wireless/wl12xx/init.c
@@ -322,9 +322,11 @@ static int wl1271_sta_hw_init(struct wl1271 *wl)
 {
 	int ret;
 
-	ret = wl1271_cmd_ext_radio_parms(wl);
-	if (ret < 0)
-		return ret;
+	if (wl->chip.id != CHIP_ID_1283_PG20) {
+		ret = wl1271_cmd_ext_radio_parms(wl);
+		if (ret < 0)
+			return ret;
+	}
 
 	/* PS config */
 	ret = wl1271_acx_config_ps(wl);
@@ -533,11 +535,17 @@ int wl1271_hw_init(struct wl1271 *wl)
 	int ret, i;
 	bool is_ap = (wl->bss_type == BSS_TYPE_AP_BSS);
 
-	ret = wl1271_cmd_general_parms(wl);
+	if (wl->chip.id == CHIP_ID_1283_PG20)
+		ret = wl128x_cmd_general_parms(wl);
+	else
+		ret = wl1271_cmd_general_parms(wl);
 	if (ret < 0)
 		return ret;
 
-	ret = wl1271_cmd_radio_parms(wl);
+	if (wl->chip.id == CHIP_ID_1283_PG20)
+		ret = wl128x_cmd_radio_parms(wl);
+	else
+		ret = wl1271_cmd_radio_parms(wl);
 	if (ret < 0)
 		return ret;
 
diff --git a/drivers/net/wireless/wl12xx/main.c b/drivers/net/wireless/wl12xx/main.c
index f24906f54a7..e1fd005dd04 100644
--- a/drivers/net/wireless/wl12xx/main.c
+++ b/drivers/net/wireless/wl12xx/main.c
@@ -438,15 +438,25 @@ static int wl1271_plt_init(struct wl1271 *wl)
 	struct conf_tx_tid *conf_tid;
 	int ret, i;
 
-	ret = wl1271_cmd_general_parms(wl);
+	if (wl->chip.id == CHIP_ID_1283_PG20)
+		ret = wl128x_cmd_general_parms(wl);
+	else
+		ret = wl1271_cmd_general_parms(wl);
 	if (ret < 0)
 		return ret;
 
-	ret = wl1271_cmd_radio_parms(wl);
+	if (wl->chip.id == CHIP_ID_1283_PG20)
+		ret = wl128x_cmd_radio_parms(wl);
+	else
+		ret = wl1271_cmd_radio_parms(wl);
 	if (ret < 0)
 		return ret;
 
-	ret = wl1271_cmd_ext_radio_parms(wl);
+	if (wl->chip.id != CHIP_ID_1283_PG20) {
+		ret = wl1271_cmd_ext_radio_parms(wl);
+		if (ret < 0)
+			return ret;
+	}
 	if (ret < 0)
 		return ret;
 
-- 
cgit v1.2.3-70-g09d2


From bc765bf3b9a095b3e41c8cda80643901884c3dd4 Mon Sep 17 00:00:00 2001
From: Shahar Levi <shahar_levi@ti.com>
Date: Sun, 6 Mar 2011 16:32:10 +0200
Subject: wl12xx: 1281/1283 support - Loading FW & NVS

Take care of FW & NVS with the auto-detection between wl127x and
wl128x.

[Moved some common code outside if statements and added notes about
NVS structure assumptions; Fixed a bug when checking the nvs size: if
the size was incorrect, the local nvs variable was set to NULL, it
should be wl->nvs instead. -- Luca]

[Merged with potential buffer overflow fix -- Luca]

Signed-off-by: Shahar Levi <shahar_levi@ti.com>
Reviewed-by: Luciano Coelho <coelho@ti.com>
Signed-off-by: Luciano Coelho <coelho@ti.com>
---
 drivers/net/wireless/wl12xx/boot.c      | 83 ++++++++++++++++++++++-----------
 drivers/net/wireless/wl12xx/cmd.c       | 11 +++--
 drivers/net/wireless/wl12xx/ini.h       |  4 +-
 drivers/net/wireless/wl12xx/main.c      | 13 ++++--
 drivers/net/wireless/wl12xx/sdio_test.c |  9 +++-
 drivers/net/wireless/wl12xx/testmode.c  |  6 ++-
 drivers/net/wireless/wl12xx/wl12xx.h    |  2 +-
 7 files changed, 86 insertions(+), 42 deletions(-)

(limited to 'drivers/net/wireless/wl12xx')

diff --git a/drivers/net/wireless/wl12xx/boot.c b/drivers/net/wireless/wl12xx/boot.c
index 69fe8703be4..38f3e8ba262 100644
--- a/drivers/net/wireless/wl12xx/boot.c
+++ b/drivers/net/wireless/wl12xx/boot.c
@@ -243,33 +243,57 @@ static int wl1271_boot_upload_nvs(struct wl1271 *wl)
 	if (wl->nvs == NULL)
 		return -ENODEV;
 
-	/*
-	 * FIXME: the LEGACY NVS image support (NVS's missing the 5GHz band
-	 * configurations) can be removed when those NVS files stop floating
-	 * around.
-	 */
-	if (wl->nvs_len == sizeof(struct wl1271_nvs_file) ||
-	    wl->nvs_len == WL1271_INI_LEGACY_NVS_FILE_SIZE) {
-		/* for now 11a is unsupported in AP mode */
-		if (wl->bss_type != BSS_TYPE_AP_BSS &&
-		    wl->nvs->general_params.dual_mode_select)
-			wl->enable_11a = true;
-	}
+	if (wl->chip.id == CHIP_ID_1283_PG20) {
+		struct wl128x_nvs_file *nvs = (struct wl128x_nvs_file *)wl->nvs;
+
+		if (wl->nvs_len == sizeof(struct wl128x_nvs_file)) {
+			if (nvs->general_params.dual_mode_select)
+				wl->enable_11a = true;
+		} else {
+			wl1271_error("nvs size is not as expected: %zu != %zu",
+				     wl->nvs_len,
+				     sizeof(struct wl128x_nvs_file));
+			kfree(wl->nvs);
+			wl->nvs = NULL;
+			wl->nvs_len = 0;
+			return -EILSEQ;
+		}
 
-	if (wl->nvs_len != sizeof(struct wl1271_nvs_file) &&
-	    (wl->nvs_len != WL1271_INI_LEGACY_NVS_FILE_SIZE ||
-	     wl->enable_11a)) {
-		wl1271_error("nvs size is not as expected: %zu != %zu",
-			     wl->nvs_len, sizeof(struct wl1271_nvs_file));
-		kfree(wl->nvs);
-		wl->nvs = NULL;
-		wl->nvs_len = 0;
-		return -EILSEQ;
-	}
+		/* only the first part of the NVS needs to be uploaded */
+		nvs_len = sizeof(nvs->nvs);
+		nvs_ptr = (u8 *)nvs->nvs;
 
-	/* only the first part of the NVS needs to be uploaded */
-	nvs_len = sizeof(wl->nvs->nvs);
-	nvs_ptr = (u8 *)wl->nvs->nvs;
+	} else {
+		struct wl1271_nvs_file *nvs =
+			(struct wl1271_nvs_file *)wl->nvs;
+		/*
+		 * FIXME: the LEGACY NVS image support (NVS's missing the 5GHz
+		 * band configurations) can be removed when those NVS files stop
+		 * floating around.
+		 */
+		if (wl->nvs_len == sizeof(struct wl1271_nvs_file) ||
+		    wl->nvs_len == WL1271_INI_LEGACY_NVS_FILE_SIZE) {
+			/* for now 11a is unsupported in AP mode */
+			if (wl->bss_type != BSS_TYPE_AP_BSS &&
+			    nvs->general_params.dual_mode_select)
+				wl->enable_11a = true;
+		}
+
+		if (wl->nvs_len != sizeof(struct wl1271_nvs_file) &&
+		    (wl->nvs_len != WL1271_INI_LEGACY_NVS_FILE_SIZE ||
+		     wl->enable_11a)) {
+			wl1271_error("nvs size is not as expected: %zu != %zu",
+				wl->nvs_len, sizeof(struct wl1271_nvs_file));
+			kfree(wl->nvs);
+			wl->nvs = NULL;
+			wl->nvs_len = 0;
+			return -EILSEQ;
+		}
+
+		/* only the first part of the NVS needs to be uploaded */
+		nvs_len = sizeof(nvs->nvs);
+		nvs_ptr = (u8 *) nvs->nvs;
+	}
 
 	/* update current MAC address to NVS */
 	nvs_ptr[11] = wl->mac_addr[0];
@@ -319,10 +343,13 @@ static int wl1271_boot_upload_nvs(struct wl1271 *wl)
 	/*
 	 * We've reached the first zero length, the first NVS table
 	 * is located at an aligned offset which is at least 7 bytes further.
+	 * NOTE: The wl->nvs->nvs element must be first, in order to
+	 * simplify the casting, we assume it is at the beginning of
+	 * the wl->nvs structure.
 	 */
-	nvs_ptr = (u8 *)wl->nvs->nvs +
-			ALIGN(nvs_ptr - (u8 *)wl->nvs->nvs + 7, 4);
-	nvs_len -= nvs_ptr - (u8 *)wl->nvs->nvs;
+	nvs_ptr = (u8 *)wl->nvs +
+			ALIGN(nvs_ptr - (u8 *)wl->nvs + 7, 4);
+	nvs_len -= nvs_ptr - (u8 *)wl->nvs;
 
 	/* Now we must set the partition correctly */
 	wl1271_set_partition(wl, &part_table[PART_WORK]);
diff --git a/drivers/net/wireless/wl12xx/cmd.c b/drivers/net/wireless/wl12xx/cmd.c
index 37eb9f36694..24680442851 100644
--- a/drivers/net/wireless/wl12xx/cmd.c
+++ b/drivers/net/wireless/wl12xx/cmd.c
@@ -187,8 +187,9 @@ out:
 
 int wl1271_cmd_radio_parms(struct wl1271 *wl)
 {
+	struct wl1271_nvs_file *nvs = (struct wl1271_nvs_file *)wl->nvs;
 	struct wl1271_radio_parms_cmd *radio_parms;
-	struct wl1271_ini_general_params *gp = &wl->nvs->general_params;
+	struct wl1271_ini_general_params *gp = &nvs->general_params;
 	int ret;
 
 	if (!wl->nvs)
@@ -201,18 +202,18 @@ int wl1271_cmd_radio_parms(struct wl1271 *wl)
 	radio_parms->test.id = TEST_CMD_INI_FILE_RADIO_PARAM;
 
 	/* 2.4GHz parameters */
-	memcpy(&radio_parms->static_params_2, &wl->nvs->stat_radio_params_2,
+	memcpy(&radio_parms->static_params_2, &nvs->stat_radio_params_2,
 	       sizeof(struct wl1271_ini_band_params_2));
 	memcpy(&radio_parms->dyn_params_2,
-	       &wl->nvs->dyn_radio_params_2[gp->tx_bip_fem_manufacturer].params,
+	       &nvs->dyn_radio_params_2[gp->tx_bip_fem_manufacturer].params,
 	       sizeof(struct wl1271_ini_fem_params_2));
 
 	/* 5GHz parameters */
 	memcpy(&radio_parms->static_params_5,
-	       &wl->nvs->stat_radio_params_5,
+	       &nvs->stat_radio_params_5,
 	       sizeof(struct wl1271_ini_band_params_5));
 	memcpy(&radio_parms->dyn_params_5,
-	       &wl->nvs->dyn_radio_params_5[gp->tx_bip_fem_manufacturer].params,
+	       &nvs->dyn_radio_params_5[gp->tx_bip_fem_manufacturer].params,
 	       sizeof(struct wl1271_ini_fem_params_5));
 
 	wl1271_dump(DEBUG_CMD, "TEST_CMD_INI_FILE_RADIO_PARAM: ",
diff --git a/drivers/net/wireless/wl12xx/ini.h b/drivers/net/wireless/wl12xx/ini.h
index 30efcd6643b..1420c842b8f 100644
--- a/drivers/net/wireless/wl12xx/ini.h
+++ b/drivers/net/wireless/wl12xx/ini.h
@@ -174,7 +174,7 @@ struct wl128x_ini_fem_params_5 {
 #define WL1271_INI_LEGACY_NVS_FILE_SIZE              800
 
 struct wl1271_nvs_file {
-	/* NVS section */
+	/* NVS section - must be first! */
 	u8 nvs[WL1271_INI_NVS_SECTION_SIZE];
 
 	/* INI section */
@@ -195,7 +195,7 @@ struct wl1271_nvs_file {
 } __packed;
 
 struct wl128x_nvs_file {
-	/* NVS section */
+	/* NVS section - must be first! */
 	u8 nvs[WL1271_INI_NVS_SECTION_SIZE];
 
 	/* INI section */
diff --git a/drivers/net/wireless/wl12xx/main.c b/drivers/net/wireless/wl12xx/main.c
index e1fd005dd04..fe0cf47a656 100644
--- a/drivers/net/wireless/wl12xx/main.c
+++ b/drivers/net/wireless/wl12xx/main.c
@@ -804,7 +804,10 @@ static int wl1271_fetch_firmware(struct wl1271 *wl)
 		break;
 	case BSS_TYPE_IBSS:
 	case BSS_TYPE_STA_BSS:
-		fw_name = WL1271_FW_NAME;
+		if (wl->chip.id == CHIP_ID_1283_PG20)
+			fw_name = WL128X_FW_NAME;
+		else
+			fw_name	= WL1271_FW_NAME;
 		break;
 	default:
 		wl1271_error("no compatible firmware for bss_type %d",
@@ -860,7 +863,7 @@ static int wl1271_fetch_nvs(struct wl1271 *wl)
 		return ret;
 	}
 
-	wl->nvs = kmemdup(fw->data, sizeof(struct wl1271_nvs_file), GFP_KERNEL);
+	wl->nvs = kmemdup(fw->data, fw->size, GFP_KERNEL);
 
 	if (!wl->nvs) {
 		wl1271_error("could not allocate memory for the nvs file");
@@ -3289,7 +3292,11 @@ int wl1271_register_hw(struct wl1271 *wl)
 
 	ret = wl1271_fetch_nvs(wl);
 	if (ret == 0) {
-		u8 *nvs_ptr = (u8 *)wl->nvs->nvs;
+		/* NOTE: The wl->nvs->nvs element must be first, in
+		 * order to simplify the casting, we assume it is at
+		 * the beginning of the wl->nvs structure.
+		 */
+		u8 *nvs_ptr = (u8 *)wl->nvs;
 
 		wl->mac_addr[0] = nvs_ptr[11];
 		wl->mac_addr[1] = nvs_ptr[10];
diff --git a/drivers/net/wireless/wl12xx/sdio_test.c b/drivers/net/wireless/wl12xx/sdio_test.c
index 01adf1b1003..e6e2ad63a1c 100644
--- a/drivers/net/wireless/wl12xx/sdio_test.c
+++ b/drivers/net/wireless/wl12xx/sdio_test.c
@@ -189,7 +189,12 @@ static int wl1271_fetch_firmware(struct wl1271 *wl)
 	const struct firmware *fw;
 	int ret;
 
-	ret = request_firmware(&fw, WL1271_FW_NAME, wl1271_wl_to_dev(wl));
+	if (wl->chip.id == CHIP_ID_1283_PG20)
+		ret = request_firmware(&fw, WL128X_FW_NAME,
+				       wl1271_wl_to_dev(wl));
+	else
+		ret = request_firmware(&fw, WL1271_FW_NAME,
+				       wl1271_wl_to_dev(wl));
 
 	if (ret < 0) {
 		wl1271_error("could not get firmware: %d", ret);
@@ -234,7 +239,7 @@ static int wl1271_fetch_nvs(struct wl1271 *wl)
 		return ret;
 	}
 
-	wl->nvs = kmemdup(fw->data, sizeof(struct wl1271_nvs_file), GFP_KERNEL);
+	wl->nvs = kmemdup(fw->data, fw->size, GFP_KERNEL);
 
 	if (!wl->nvs) {
 		wl1271_error("could not allocate memory for the nvs file");
diff --git a/drivers/net/wireless/wl12xx/testmode.c b/drivers/net/wireless/wl12xx/testmode.c
index 6ec06a4a4c6..da351d7cd1f 100644
--- a/drivers/net/wireless/wl12xx/testmode.c
+++ b/drivers/net/wireless/wl12xx/testmode.c
@@ -27,6 +27,7 @@
 
 #include "wl12xx.h"
 #include "acx.h"
+#include "reg.h"
 
 #define WL1271_TM_MAX_DATA_LENGTH 1024
 
@@ -204,7 +205,10 @@ static int wl1271_tm_cmd_nvs_push(struct wl1271 *wl, struct nlattr *tb[])
 
 	kfree(wl->nvs);
 
-	if (len != sizeof(struct wl1271_nvs_file))
+	if ((wl->chip.id == CHIP_ID_1283_PG20) &&
+	    (len != sizeof(struct wl128x_nvs_file)))
+		return -EINVAL;
+	else if (len != sizeof(struct wl1271_nvs_file))
 		return -EINVAL;
 
 	wl->nvs = kzalloc(len, GFP_KERNEL);
diff --git a/drivers/net/wireless/wl12xx/wl12xx.h b/drivers/net/wireless/wl12xx/wl12xx.h
index 959b338d0af..e59f5392e90 100644
--- a/drivers/net/wireless/wl12xx/wl12xx.h
+++ b/drivers/net/wireless/wl12xx/wl12xx.h
@@ -378,7 +378,7 @@ struct wl1271 {
 	u8 *fw;
 	size_t fw_len;
 	u8 fw_bss_type;
-	struct wl1271_nvs_file *nvs;
+	void *nvs;
 	size_t nvs_len;
 
 	s8 hw_pg_ver;
-- 
cgit v1.2.3-70-g09d2


From 5ea417ae7749076ddaacb5b36487cae6ac920413 Mon Sep 17 00:00:00 2001
From: Shahar Levi <shahar_levi@ti.com>
Date: Sun, 6 Mar 2011 16:32:11 +0200
Subject: wl12xx: 1281/1283 support - New boot sequence

Boot sequence support FREF clock and TCXO clock.
WL128x has two clocks input - TCXO and FREF.
TCXO is the main clock of the device, while FREF is used to sync
between the GPS and the cellular modem.
Auto-detection checks where TCXO is 32.736MHz or 16.368MHz, in that
case the FREF will be used as the WLAN/BT main clock.

[Use clock enumeration as defined in linux/wl12xx.h; remove
unnecessary else block in wl128x_switch_fref; remove unnecessary
change in main.c; remove some unnecessary debug prints and comments;
fix potential use of uninitialized value (pll_config) -- Luca]

Signed-off-by: Shahar Levi <shahar_levi@ti.com>
Reviewed-by: Luciano Coelho <coelho@ti.com>
Signed-off-by: Luciano Coelho <coelho@ti.com>
---
 drivers/net/wireless/wl12xx/boot.c      | 183 ++++++++++++++++++++++++++++++--
 drivers/net/wireless/wl12xx/sdio.c      |   1 +
 drivers/net/wireless/wl12xx/sdio_test.c |   1 +
 drivers/net/wireless/wl12xx/spi.c       |   1 +
 drivers/net/wireless/wl12xx/wl12xx.h    |   1 +
 5 files changed, 179 insertions(+), 8 deletions(-)

(limited to 'drivers/net/wireless/wl12xx')

diff --git a/drivers/net/wireless/wl12xx/boot.c b/drivers/net/wireless/wl12xx/boot.c
index 38f3e8ba262..9d742c1e75a 100644
--- a/drivers/net/wireless/wl12xx/boot.c
+++ b/drivers/net/wireless/wl12xx/boot.c
@@ -22,6 +22,7 @@
  */
 
 #include <linux/slab.h>
+#include <linux/wl12xx.h>
 
 #include "acx.h"
 #include "reg.h"
@@ -520,24 +521,159 @@ static void wl1271_boot_hw_version(struct wl1271 *wl)
 		wl->quirks |= WL12XX_QUIRK_END_OF_TRANSACTION;
 }
 
-/* uploads NVS and firmware */
-int wl1271_load_firmware(struct wl1271 *wl)
+/*
+ * WL128x has two clocks input - TCXO and FREF.
+ * TCXO is the main clock of the device, while FREF is used to sync
+ * between the GPS and the cellular modem.
+ * In cases where TCXO is 32.736MHz or 16.368MHz, the FREF will be used
+ * as the WLAN/BT main clock.
+ */
+static int wl128x_switch_fref(struct wl1271 *wl, bool *is_ref_clk)
 {
-	int ret = 0;
-	u32 tmp, clk, pause;
+	u16 sys_clk_cfg_val;
+
+	/* if working on XTAL-only mode go directly to TCXO TO FREF SWITCH */
+	if ((wl->ref_clock == CONF_REF_CLK_38_4_M_XTAL) ||
+	    (wl->ref_clock == CONF_REF_CLK_26_M_XTAL))
+		return true;
+
+	/* Read clock source FREF or TCXO */
+	sys_clk_cfg_val = wl1271_top_reg_read(wl, SYS_CLK_CFG_REG);
+
+	if (sys_clk_cfg_val & PRCM_CM_EN_MUX_WLAN_FREF) {
+		/* if bit 3 is set - working with FREF clock */
+		wl1271_debug(DEBUG_BOOT, "working with FREF clock, skip"
+			     " to FREF");
+
+		*is_ref_clk = true;
+	} else {
+		/* if bit 3 is clear - working with TCXO clock */
+		wl1271_debug(DEBUG_BOOT, "working with TCXO clock");
+
+		/* TCXO to FREF switch, check TXCO clock config */
+		if ((wl->tcxo_clock != WL12XX_TCXOCLOCK_16_368) &&
+		    (wl->tcxo_clock != WL12XX_TCXOCLOCK_32_736)) {
+			/*
+			 * not 16.368Mhz and not 32.736Mhz - skip to
+			 * configure ELP stage
+			 */
+			wl1271_debug(DEBUG_BOOT, "NEW PLL ALGO:"
+				     " TcxoRefClk=%d - not 16.368Mhz and not"
+				     " 32.736Mhz - skip to configure ELP"
+				     " stage", wl->tcxo_clock);
+
+			*is_ref_clk = false;
+		} else {
+			wl1271_debug(DEBUG_BOOT, "NEW PLL ALGO:"
+				     "TcxoRefClk=%d - 16.368Mhz or 32.736Mhz"
+				     " - TCXO to FREF switch",
+				     wl->tcxo_clock);
+
+			return true;
+		}
+	}
+
+	return false;
+}
+
+static int wl128x_boot_clk(struct wl1271 *wl, bool *is_ref_clk)
+{
+	if (wl128x_switch_fref(wl, is_ref_clk)) {
+		wl1271_debug(DEBUG_BOOT, "XTAL-only mode go directly to"
+					 " TCXO TO FREF SWITCH");
+		/* TCXO to FREF switch - for PG2.0 */
+		wl1271_top_reg_write(wl, WL_SPARE_REG,
+				     WL_SPARE_MASK_8526);
+
+		wl1271_top_reg_write(wl, SYS_CLK_CFG_REG,
+			WL_CLK_REQ_TYPE_PG2 | MCS_PLL_CLK_SEL_FREF);
+
+		*is_ref_clk = true;
+		mdelay(15);
+	}
+
+	/* Set bit 2 in spare register to avoid illegal access */
+	wl1271_top_reg_write(wl, WL_SPARE_REG, WL_SPARE_VAL);
+
+	/* working with TCXO clock */
+	if ((*is_ref_clk == false) &&
+	    ((wl->tcxo_clock == WL12XX_TCXOCLOCK_16_8) ||
+	     (wl->tcxo_clock == WL12XX_TCXOCLOCK_33_6))) {
+		wl1271_debug(DEBUG_BOOT, "16_8_M or 33_6_M TCXO detected");
+
+		/* Manually Configure MCS PLL settings PG2.0 Only */
+		wl1271_top_reg_write(wl, MCS_PLL_M_REG, MCS_PLL_M_REG_VAL);
+		wl1271_top_reg_write(wl, MCS_PLL_N_REG, MCS_PLL_N_REG_VAL);
+		wl1271_top_reg_write(wl, MCS_PLL_CONFIG_REG,
+				     MCS_PLL_CONFIG_REG_VAL);
+	} else {
+		int pll_config;
+		u16 mcs_pll_config_val;
+
+		/*
+		 * Configure MCS PLL settings to FREF Freq
+		 * Set the values that determine the time elapse since the PLL's
+		 * get their enable signal until the lock indication is set
+		 */
+		wl1271_top_reg_write(wl, PLL_LOCK_COUNTERS_REG,
+			PLL_LOCK_COUNTERS_COEX | PLL_LOCK_COUNTERS_MCS);
+
+		mcs_pll_config_val = wl1271_top_reg_read(wl,
+						 MCS_PLL_CONFIG_REG);
+		/*
+		 * Set the MCS PLL input frequency value according to the
+		 * reference clock value detected/read
+		 */
+		if (*is_ref_clk == false) {
+			if ((wl->tcxo_clock == WL12XX_TCXOCLOCK_19_2) ||
+			    (wl->tcxo_clock == WL12XX_TCXOCLOCK_38_4))
+				pll_config = 1;
+			else if ((wl->tcxo_clock == WL12XX_TCXOCLOCK_26)
+				 ||
+				 (wl->tcxo_clock == WL12XX_TCXOCLOCK_52))
+				pll_config = 2;
+			else
+				return -EINVAL;
+		} else {
+			if ((wl->ref_clock == CONF_REF_CLK_19_2_E) ||
+			    (wl->ref_clock == CONF_REF_CLK_38_4_E))
+				pll_config = 1;
+			else if ((wl->ref_clock == CONF_REF_CLK_26_E) ||
+				 (wl->ref_clock == CONF_REF_CLK_52_E))
+				pll_config = 2;
+			else
+				return -EINVAL;
+		}
+
+		mcs_pll_config_val |= (pll_config << (MCS_SEL_IN_FREQ_SHIFT)) &
+				      (MCS_SEL_IN_FREQ_MASK);
+		wl1271_top_reg_write(wl, MCS_PLL_CONFIG_REG,
+				     mcs_pll_config_val);
+	}
+
+	return 0;
+}
+
+static int wl127x_boot_clk(struct wl1271 *wl)
+{
+	u32 pause;
+	u32 clk;
 
 	wl1271_boot_hw_version(wl);
 
-	if (wl->ref_clock == 0 || wl->ref_clock == 2 || wl->ref_clock == 4)
+	if (wl->ref_clock == CONF_REF_CLK_19_2_E ||
+	    wl->ref_clock == CONF_REF_CLK_38_4_E ||
+	    wl->ref_clock == CONF_REF_CLK_38_4_M_XTAL)
 		/* ref clk: 19.2/38.4/38.4-XTAL */
 		clk = 0x3;
-	else if (wl->ref_clock == 1 || wl->ref_clock == 3)
+	else if (wl->ref_clock == CONF_REF_CLK_26_E ||
+		 wl->ref_clock == CONF_REF_CLK_52_E)
 		/* ref clk: 26/52 */
 		clk = 0x5;
 	else
 		return -EINVAL;
 
-	if (wl->ref_clock != 0) {
+	if (wl->ref_clock != CONF_REF_CLK_19_2_E) {
 		u16 val;
 		/* Set clock type (open drain) */
 		val = wl1271_top_reg_read(wl, OCP_REG_CLK_TYPE);
@@ -567,6 +703,26 @@ int wl1271_load_firmware(struct wl1271 *wl)
 	pause |= WU_COUNTER_PAUSE_VAL;
 	wl1271_write32(wl, WU_COUNTER_PAUSE, pause);
 
+	return 0;
+}
+
+/* uploads NVS and firmware */
+int wl1271_load_firmware(struct wl1271 *wl)
+{
+	int ret = 0;
+	u32 tmp, clk;
+	bool is_ref_clk = false;
+
+	if (wl->chip.id == CHIP_ID_1283_PG20) {
+		ret = wl128x_boot_clk(wl, &is_ref_clk);
+		if (ret < 0)
+			goto out;
+	} else {
+		ret = wl127x_boot_clk(wl);
+		if (ret < 0)
+			goto out;
+	}
+
 	/* Continue the ELP wake up sequence */
 	wl1271_write32(wl, WELP_ARM_COMMAND, WELP_ARM_COMMAND_VAL);
 	udelay(500);
@@ -582,7 +738,15 @@ int wl1271_load_firmware(struct wl1271 *wl)
 
 	wl1271_debug(DEBUG_BOOT, "clk2 0x%x", clk);
 
-	clk |= (wl->ref_clock << 1) << 4;
+	if (wl->chip.id == CHIP_ID_1283_PG20) {
+		if (is_ref_clk == false)
+			clk |= ((wl->tcxo_clock & 0x3) << 1) << 4;
+		else
+			clk |= ((wl->ref_clock & 0x3) << 1) << 4;
+	} else {
+		clk |= (wl->ref_clock << 1) << 4;
+	}
+
 	wl1271_write32(wl, DRPW_SCRATCH_START, clk);
 
 	wl1271_set_partition(wl, &part_table[PART_WORK]);
@@ -615,6 +779,9 @@ int wl1271_load_firmware(struct wl1271 *wl)
 	/* WL1271: The reference driver skips steps 7 to 10 (jumps directly
 	 * to upload_fw) */
 
+	if (wl->chip.id == CHIP_ID_1283_PG20)
+		wl1271_top_reg_write(wl, SDIO_IO_DS, HCI_IO_DS_6MA);
+
 	ret = wl1271_boot_upload_firmware(wl);
 	if (ret < 0)
 		goto out;
diff --git a/drivers/net/wireless/wl12xx/sdio.c b/drivers/net/wireless/wl12xx/sdio.c
index 7491b3d8487..f6dd3dea4f3 100644
--- a/drivers/net/wireless/wl12xx/sdio.c
+++ b/drivers/net/wireless/wl12xx/sdio.c
@@ -255,6 +255,7 @@ static int __devinit wl1271_probe(struct sdio_func *func,
 
 	wl->irq = wlan_data->irq;
 	wl->ref_clock = wlan_data->board_ref_clock;
+	wl->tcxo_clock = wlan_data->board_tcxo_clock;
 
 	ret = request_threaded_irq(wl->irq, wl1271_hardirq, wl1271_irq,
 				   IRQF_TRIGGER_HIGH | IRQF_ONESHOT,
diff --git a/drivers/net/wireless/wl12xx/sdio_test.c b/drivers/net/wireless/wl12xx/sdio_test.c
index e6e2ad63a1c..c02c8704661 100644
--- a/drivers/net/wireless/wl12xx/sdio_test.c
+++ b/drivers/net/wireless/wl12xx/sdio_test.c
@@ -421,6 +421,7 @@ static int __devinit wl1271_probe(struct sdio_func *func,
 
 	wl->irq = wlan_data->irq;
 	wl->ref_clock = wlan_data->board_ref_clock;
+	wl->tcxo_clock = wlan_data->board_tcxo_clock;
 
 	sdio_set_drvdata(func, wl_test);
 
diff --git a/drivers/net/wireless/wl12xx/spi.c b/drivers/net/wireless/wl12xx/spi.c
index bfb1171176c..f5525361f2f 100644
--- a/drivers/net/wireless/wl12xx/spi.c
+++ b/drivers/net/wireless/wl12xx/spi.c
@@ -401,6 +401,7 @@ static int __devinit wl1271_probe(struct spi_device *spi)
 	}
 
 	wl->ref_clock = pdata->board_ref_clock;
+	wl->tcxo_clock = pdata->board_tcxo_clock;
 
 	wl->irq = spi->irq;
 	if (wl->irq < 0) {
diff --git a/drivers/net/wireless/wl12xx/wl12xx.h b/drivers/net/wireless/wl12xx/wl12xx.h
index e59f5392e90..4b556776fd5 100644
--- a/drivers/net/wireless/wl12xx/wl12xx.h
+++ b/drivers/net/wireless/wl12xx/wl12xx.h
@@ -535,6 +535,7 @@ struct wl1271 {
 	u8 ba_rx_bitmap;
 
 	u32 block_size;
+	int tcxo_clock;
 
 	/*
 	 * AP-mode - links indexed by HLID. The global and broadcast links
-- 
cgit v1.2.3-70-g09d2


From 13b107dd9808343d05627f0fba7fbc764c86738e Mon Sep 17 00:00:00 2001
From: Shahar Levi <shahar_levi@ti.com>
Date: Sun, 6 Mar 2011 16:32:12 +0200
Subject: wl12xx: 1281/1283 support - use dynamic memory for the RX/TX pools

Separate the memory configuration to chip-specific structures and
implement dynamic memory for wl128x.

This feature allows us to move TX memory blocks to the RX pool when
the RX path is overloaded.

Thanks for Arik Nemtsov <arik@wizery.com> for helping simplify the
wl1271_fw_status() code.

[Rewrote the commit subject and message for clarity; improved some
comments and changed "spare" to "padding" for consistency; added a
FIXME for the AP memory configuration -- Luca]

Signed-off-by: Shahar Levi <shahar_levi@ti.com>
Reviewed-by: Luciano Coelho <coelho@ti.com>
Signed-off-by: Luciano Coelho <coelho@ti.com>
---
 drivers/net/wireless/wl12xx/acx.c    | 35 +++++++++++++++++---------
 drivers/net/wireless/wl12xx/conf.h   |  3 ++-
 drivers/net/wireless/wl12xx/main.c   | 48 ++++++++++++++++++++++++++++++------
 drivers/net/wireless/wl12xx/wl12xx.h |  5 ++++
 4 files changed, 70 insertions(+), 21 deletions(-)

(limited to 'drivers/net/wireless/wl12xx')

diff --git a/drivers/net/wireless/wl12xx/acx.c b/drivers/net/wireless/wl12xx/acx.c
index 50676b36ad2..e005aa40ef8 100644
--- a/drivers/net/wireless/wl12xx/acx.c
+++ b/drivers/net/wireless/wl12xx/acx.c
@@ -965,10 +965,13 @@ int wl1271_acx_ap_mem_cfg(struct wl1271 *wl)
 	}
 
 	/* memory config */
-	mem_conf->num_stations = wl->conf.mem.num_stations;
-	mem_conf->rx_mem_block_num = wl->conf.mem.rx_block_num;
-	mem_conf->tx_min_mem_block_num = wl->conf.mem.tx_min_block_num;
-	mem_conf->num_ssid_profiles = wl->conf.mem.ssid_profiles;
+	/* FIXME: for now we always use mem_wl127x for AP, because it
+	 * doesn't support dynamic memory and we don't have the
+	 * optimal values for wl128x without dynamic memory yet */
+	mem_conf->num_stations = wl->conf.mem_wl127x.num_stations;
+	mem_conf->rx_mem_block_num = wl->conf.mem_wl127x.rx_block_num;
+	mem_conf->tx_min_mem_block_num = wl->conf.mem_wl127x.tx_min_block_num;
+	mem_conf->num_ssid_profiles = wl->conf.mem_wl127x.ssid_profiles;
 	mem_conf->total_tx_descriptors = cpu_to_le32(ACX_TX_DESCRIPTORS);
 
 	ret = wl1271_cmd_configure(wl, ACX_MEM_CFG, mem_conf,
@@ -986,6 +989,7 @@ out:
 int wl1271_acx_sta_mem_cfg(struct wl1271 *wl)
 {
 	struct wl1271_acx_sta_config_memory *mem_conf;
+	struct conf_memory_settings *mem;
 	int ret;
 
 	wl1271_debug(DEBUG_ACX, "wl1271 mem cfg");
@@ -996,16 +1000,21 @@ int wl1271_acx_sta_mem_cfg(struct wl1271 *wl)
 		goto out;
 	}
 
+	if (wl->chip.id == CHIP_ID_1283_PG20)
+		mem = &wl->conf.mem_wl128x;
+	else
+		mem = &wl->conf.mem_wl127x;
+
 	/* memory config */
-	mem_conf->num_stations = wl->conf.mem.num_stations;
-	mem_conf->rx_mem_block_num = wl->conf.mem.rx_block_num;
-	mem_conf->tx_min_mem_block_num = wl->conf.mem.tx_min_block_num;
-	mem_conf->num_ssid_profiles = wl->conf.mem.ssid_profiles;
+	mem_conf->num_stations = mem->num_stations;
+	mem_conf->rx_mem_block_num = mem->rx_block_num;
+	mem_conf->tx_min_mem_block_num = mem->tx_min_block_num;
+	mem_conf->num_ssid_profiles = mem->ssid_profiles;
 	mem_conf->total_tx_descriptors = cpu_to_le32(ACX_TX_DESCRIPTORS);
-	mem_conf->dyn_mem_enable = wl->conf.mem.dynamic_memory;
-	mem_conf->tx_free_req = wl->conf.mem.min_req_tx_blocks;
-	mem_conf->rx_free_req = wl->conf.mem.min_req_rx_blocks;
-	mem_conf->tx_min = wl->conf.mem.tx_min;
+	mem_conf->dyn_mem_enable = mem->dynamic_memory;
+	mem_conf->tx_free_req = mem->min_req_tx_blocks;
+	mem_conf->rx_free_req = mem->min_req_rx_blocks;
+	mem_conf->tx_min = mem->tx_min;
 
 	ret = wl1271_cmd_configure(wl, ACX_MEM_CFG, mem_conf,
 				   sizeof(*mem_conf));
@@ -1072,6 +1081,8 @@ int wl1271_acx_init_mem_config(struct wl1271 *wl)
 	wl1271_debug(DEBUG_TX, "available tx blocks: %d",
 		     wl->tx_blocks_available);
 
+	wl->tx_new_total = wl->tx_blocks_available;
+
 	return 0;
 }
 
diff --git a/drivers/net/wireless/wl12xx/conf.h b/drivers/net/wireless/wl12xx/conf.h
index a00f22c6c74..743bd0beb63 100644
--- a/drivers/net/wireless/wl12xx/conf.h
+++ b/drivers/net/wireless/wl12xx/conf.h
@@ -1204,7 +1204,8 @@ struct conf_drv_settings {
 	struct conf_scan_settings scan;
 	struct conf_rf_settings rf;
 	struct conf_ht_setting ht;
-	struct conf_memory_settings mem;
+	struct conf_memory_settings mem_wl127x;
+	struct conf_memory_settings mem_wl128x;
 };
 
 #endif
diff --git a/drivers/net/wireless/wl12xx/main.c b/drivers/net/wireless/wl12xx/main.c
index fe0cf47a656..3c381ceadb9 100644
--- a/drivers/net/wireless/wl12xx/main.c
+++ b/drivers/net/wireless/wl12xx/main.c
@@ -298,7 +298,7 @@ static struct conf_drv_settings default_conf = {
 		.tx_ba_win_size = 64,
 		.inactivity_timeout = 10000,
 	},
-	.mem = {
+	.mem_wl127x = {
 		.num_stations                 = 1,
 		.ssid_profiles                = 1,
 		.rx_block_num                 = 70,
@@ -307,7 +307,17 @@ static struct conf_drv_settings default_conf = {
 		.min_req_tx_blocks            = 100,
 		.min_req_rx_blocks            = 22,
 		.tx_min                       = 27,
-	}
+	},
+	.mem_wl128x = {
+		.num_stations                 = 1,
+		.ssid_profiles                = 1,
+		.rx_block_num                 = 40,
+		.tx_min_block_num             = 40,
+		.dynamic_memory               = 1,
+		.min_req_tx_blocks            = 45,
+		.min_req_rx_blocks            = 22,
+		.tx_min                       = 27,
+	},
 };
 
 static void __wl1271_op_remove_interface(struct wl1271 *wl);
@@ -608,16 +618,27 @@ static void wl1271_fw_status(struct wl1271 *wl,
 {
 	struct wl1271_fw_common_status *status = &full_status->common;
 	struct timespec ts;
+	u32 old_tx_blk_count = wl->tx_blocks_available;
 	u32 total = 0;
 	int i;
 
-	if (wl->bss_type == BSS_TYPE_AP_BSS)
+	if (wl->bss_type == BSS_TYPE_AP_BSS) {
 		wl1271_raw_read(wl, FW_STATUS_ADDR, status,
 				sizeof(struct wl1271_fw_ap_status), false);
-	else
+	} else {
 		wl1271_raw_read(wl, FW_STATUS_ADDR, status,
 				sizeof(struct wl1271_fw_sta_status), false);
 
+		/* Update tx total blocks change */
+		wl->tx_total_diff +=
+			((struct wl1271_fw_sta_status *)status)->tx_total -
+			wl->tx_new_total;
+
+		/* Update total tx blocks */
+		wl->tx_new_total =
+			((struct wl1271_fw_sta_status *)status)->tx_total;
+	}
+
 	wl1271_debug(DEBUG_IRQ, "intr: 0x%x (fw_rx_counter = %d, "
 		     "drv_rx_counter = %d, tx_results_counter = %d)",
 		     status->intr,
@@ -627,17 +648,28 @@ static void wl1271_fw_status(struct wl1271 *wl,
 
 	/* update number of available TX blocks */
 	for (i = 0; i < NUM_TX_QUEUES; i++) {
-		u32 cnt = le32_to_cpu(status->tx_released_blks[i]) -
+		total += le32_to_cpu(status->tx_released_blks[i]) -
 			wl->tx_blocks_freed[i];
 
 		wl->tx_blocks_freed[i] =
 			le32_to_cpu(status->tx_released_blks[i]);
-		wl->tx_blocks_available += cnt;
-		total += cnt;
+
+	}
+
+	/*
+	 * By adding the freed blocks to tx_total_diff we are actually
+	 * moving them to the RX pool.
+	 */
+	wl->tx_total_diff += total;
+
+	/* if we have positive difference, add the blocks to the TX pool */
+	if (wl->tx_total_diff >= 0) {
+		wl->tx_blocks_available += wl->tx_total_diff;
+		wl->tx_total_diff = 0;
 	}
 
 	/* if more blocks are available now, tx work can be scheduled */
-	if (total)
+	if (wl->tx_blocks_available > old_tx_blk_count)
 		clear_bit(WL1271_FLAG_FW_TX_BUSY, &wl->flags);
 
 	/* for AP update num of allocated TX blocks per link and ps status */
diff --git a/drivers/net/wireless/wl12xx/wl12xx.h b/drivers/net/wireless/wl12xx/wl12xx.h
index 4b556776fd5..ad04b8337a2 100644
--- a/drivers/net/wireless/wl12xx/wl12xx.h
+++ b/drivers/net/wireless/wl12xx/wl12xx.h
@@ -267,6 +267,8 @@ struct wl1271_fw_sta_status {
 	u8  tx_total;
 	u8  reserved1;
 	__le16 reserved2;
+	/* Total structure size is 68 bytes */
+	u32 padding;
 } __packed;
 
 struct wl1271_fw_full_status {
@@ -397,6 +399,9 @@ struct wl1271 {
 	u32 tx_blocks_freed[NUM_TX_QUEUES];
 	u32 tx_blocks_available;
 	u32 tx_results_count;
+	/* Indicates how many memory blocks should be moved to the RX pool */
+	int tx_total_diff;
+	u32 tx_new_total;
 
 	/* Transmitted TX packets counter for chipset interface */
 	u32 tx_packets_count;
-- 
cgit v1.2.3-70-g09d2


From ae77eccf04f8c36769bdba334e1bbcc7bb9d3644 Mon Sep 17 00:00:00 2001
From: Shahar Levi <shahar_levi@ti.com>
Date: Sun, 6 Mar 2011 16:32:13 +0200
Subject: wl12xx: 1281/1283 support - Improve Tx & Rx path

Reduced bus transactions in the Tx & Rx path.

[Removed unnecessary check wl->chip.id != CHIP_ID_1283_PG20 when
checking the quirk -- Luca]

Signed-off-by: Shahar Levi <shahar_levi@ti.com>
Reviewed-by: Luciano Coelho <coelho@ti.com>
Signed-off-by: Luciano Coelho <coelho@ti.com>
---
 drivers/net/wireless/wl12xx/rx.c | 31 +++++++++++++++++++------------
 drivers/net/wireless/wl12xx/tx.c | 30 +++++++++++++++++++++---------
 2 files changed, 40 insertions(+), 21 deletions(-)

(limited to 'drivers/net/wireless/wl12xx')

diff --git a/drivers/net/wireless/wl12xx/rx.c b/drivers/net/wireless/wl12xx/rx.c
index 919b59f0030..132b0cab569 100644
--- a/drivers/net/wireless/wl12xx/rx.c
+++ b/drivers/net/wireless/wl12xx/rx.c
@@ -163,18 +163,25 @@ void wl1271_rx(struct wl1271 *wl, struct wl1271_fw_common_status *status)
 			break;
 		}
 
-		/*
-		 * Choose the block we want to read
-		 * For aggregated packets, only the first memory block should
-		 * be retrieved. The FW takes care of the rest.
-		 */
-		mem_block = wl1271_rx_get_mem_block(status, drv_rx_counter);
-		wl->rx_mem_pool_addr.addr = (mem_block << 8) +
-			le32_to_cpu(wl_mem_map->packet_memory_pool_start);
-		wl->rx_mem_pool_addr.addr_extra =
-			wl->rx_mem_pool_addr.addr + 4;
-		wl1271_write(wl, WL1271_SLV_REG_DATA, &wl->rx_mem_pool_addr,
-				sizeof(wl->rx_mem_pool_addr), false);
+		if (wl->chip.id != CHIP_ID_1283_PG20) {
+			/*
+			 * Choose the block we want to read
+			 * For aggregated packets, only the first memory block
+			 * should be retrieved. The FW takes care of the rest.
+			 */
+			mem_block = wl1271_rx_get_mem_block(status,
+							    drv_rx_counter);
+
+			wl->rx_mem_pool_addr.addr = (mem_block << 8) +
+			   le32_to_cpu(wl_mem_map->packet_memory_pool_start);
+
+			wl->rx_mem_pool_addr.addr_extra =
+				wl->rx_mem_pool_addr.addr + 4;
+
+			wl1271_write(wl, WL1271_SLV_REG_DATA,
+				     &wl->rx_mem_pool_addr,
+				     sizeof(wl->rx_mem_pool_addr), false);
+		}
 
 		/* Read all available packets at once */
 		wl1271_read(wl, WL1271_SLV_MEM_DATA, wl->aggr_buf,
diff --git a/drivers/net/wireless/wl12xx/tx.c b/drivers/net/wireless/wl12xx/tx.c
index e296f0a5fe2..afc8505abeb 100644
--- a/drivers/net/wireless/wl12xx/tx.c
+++ b/drivers/net/wireless/wl12xx/tx.c
@@ -158,8 +158,14 @@ static int wl1271_tx_allocate(struct wl1271 *wl, struct sk_buff *skb, u32 extra,
 		desc = (struct wl1271_tx_hw_descr *)skb_push(
 			skb, total_len - skb->len);
 
-		desc->wl127x_mem.extra_blocks = TX_HW_BLOCK_SPARE;
-		desc->wl127x_mem.total_mem_blocks = total_blocks;
+		/* HW descriptor fields change between wl127x and wl128x */
+		if (wl->chip.id == CHIP_ID_1283_PG20) {
+			desc->wl128x_mem.total_mem_blocks = total_blocks;
+		} else {
+			desc->wl127x_mem.extra_blocks = TX_HW_BLOCK_SPARE;
+			desc->wl127x_mem.total_mem_blocks = total_blocks;
+		}
+
 		desc->id = id;
 
 		wl->tx_blocks_available -= total_blocks;
@@ -249,6 +255,13 @@ static void wl1271_tx_fill_hdr(struct wl1271 *wl, struct sk_buff *skb,
 
 		desc->wl128x_mem.extra_bytes = aligned_len - skb->len;
 		desc->length = cpu_to_le16(aligned_len >> 2);
+
+		wl1271_debug(DEBUG_TX, "tx_fill_hdr: hlid: %d "
+			     "tx_attr: 0x%x len: %d life: %d mem: %d",
+			     desc->hlid, tx_attr,
+			     le16_to_cpu(desc->length),
+			     le16_to_cpu(desc->life_time),
+			     desc->wl128x_mem.total_mem_blocks);
 	} else {
 		int pad;
 
@@ -260,16 +273,15 @@ static void wl1271_tx_fill_hdr(struct wl1271 *wl, struct sk_buff *skb,
 		pad = aligned_len - skb->len;
 		tx_attr |= pad << TX_HW_ATTR_OFST_LAST_WORD_PAD;
 
-		wl1271_debug(DEBUG_TX, "tx_fill_hdr: padding: %d", pad);
+		wl1271_debug(DEBUG_TX, "tx_fill_hdr: pad: %d hlid: %d "
+			     "tx_attr: 0x%x len: %d life: %d mem: %d", pad,
+			     desc->hlid, tx_attr,
+			     le16_to_cpu(desc->length),
+			     le16_to_cpu(desc->life_time),
+			     desc->wl127x_mem.total_mem_blocks);
 	}
 
 	desc->tx_attr = cpu_to_le16(tx_attr);
-
-	wl1271_debug(DEBUG_TX, "tx_fill_hdr: hlid: %d tx_attr: 0x%x "
-		     "len: %d life: %d mem: %d",
-		     desc->hlid, le16_to_cpu(desc->tx_attr),
-		     le16_to_cpu(desc->length),	le16_to_cpu(desc->life_time),
-		     desc->wl127x_mem.total_mem_blocks);
 }
 
 /* caller must hold wl->mutex */
-- 
cgit v1.2.3-70-g09d2


From ae47c45fd02fdf88d57adc370e78e7a01e2bfcbc Mon Sep 17 00:00:00 2001
From: Shahar Levi <shahar_levi@ti.com>
Date: Sun, 6 Mar 2011 16:32:14 +0200
Subject: wl12xx: 1281/1283 support - Add dummy packet support

Support sending dummy packet to wl128x FW as results of
dummy packet event. That is part of dynamic TX mem blocks mechanism.

Only send dummy packet when not in AP mode.

[Even though the DUMMY_PACKET_EVENT_ID and the
STA_REMOVE_COMPLETE_EVENT_ID events are defined to the same value, we
need to treat them separately in the code.  Keep the check and enable
STA_REMOVE_COMPLETE_EVENT_ID for AP mode and DUMMY_PACKET_EVENT_ID for
STA.  Moved one warning to a cleaner place.  Use WL1271_TID_MGMT for
dummy packets -- Luca]

Signed-off-by: Shahar Levi <shahar_levi@ti.com>
Reviewed-by: Luciano Coelho <coelho@ti.com>
Signed-off-by: Luciano Coelho <coelho@ti.com>
---
 drivers/net/wireless/wl12xx/boot.c  |  2 +
 drivers/net/wireless/wl12xx/event.c |  6 +++
 drivers/net/wireless/wl12xx/event.h |  5 ++-
 drivers/net/wireless/wl12xx/io.h    |  1 +
 drivers/net/wireless/wl12xx/main.c  | 42 +++++++++++++++++++++
 drivers/net/wireless/wl12xx/tx.c    | 75 +++++++++++++++++++++++++++----------
 drivers/net/wireless/wl12xx/tx.h    |  6 +++
 7 files changed, 116 insertions(+), 21 deletions(-)

(limited to 'drivers/net/wireless/wl12xx')

diff --git a/drivers/net/wireless/wl12xx/boot.c b/drivers/net/wireless/wl12xx/boot.c
index 9d742c1e75a..34bf2fe47dc 100644
--- a/drivers/net/wireless/wl12xx/boot.c
+++ b/drivers/net/wireless/wl12xx/boot.c
@@ -482,6 +482,8 @@ static int wl1271_boot_run_firmware(struct wl1271 *wl)
 
 	if (wl->bss_type == BSS_TYPE_AP_BSS)
 		wl->event_mask |= STA_REMOVE_COMPLETE_EVENT_ID;
+	else
+		wl->event_mask |= DUMMY_PACKET_EVENT_ID;
 
 	ret = wl1271_event_unmask(wl);
 	if (ret < 0) {
diff --git a/drivers/net/wireless/wl12xx/event.c b/drivers/net/wireless/wl12xx/event.c
index 1b170c5cc59..413d901985f 100644
--- a/drivers/net/wireless/wl12xx/event.c
+++ b/drivers/net/wireless/wl12xx/event.c
@@ -228,6 +228,12 @@ static int wl1271_event_process(struct wl1271 *wl, struct event_mailbox *mbox)
 			wl1271_event_rssi_trigger(wl, mbox);
 	}
 
+	if ((vector & DUMMY_PACKET_EVENT_ID) && !is_ap) {
+		wl1271_debug(DEBUG_EVENT, "DUMMY_PACKET_ID_EVENT_ID");
+		if (wl->vif)
+			wl1271_tx_dummy_packet(wl);
+	}
+
 	if (wl->vif && beacon_loss)
 		ieee80211_connection_loss(wl->vif);
 
diff --git a/drivers/net/wireless/wl12xx/event.h b/drivers/net/wireless/wl12xx/event.h
index 0e80886f303..b6cf06e565a 100644
--- a/drivers/net/wireless/wl12xx/event.h
+++ b/drivers/net/wireless/wl12xx/event.h
@@ -59,7 +59,10 @@ enum {
 	BSS_LOSE_EVENT_ID			 = BIT(18),
 	REGAINED_BSS_EVENT_ID			 = BIT(19),
 	ROAMING_TRIGGER_MAX_TX_RETRY_EVENT_ID	 = BIT(20),
-	STA_REMOVE_COMPLETE_EVENT_ID		 = BIT(21), /* AP */
+	/* STA: dummy paket for dynamic mem blocks */
+	DUMMY_PACKET_EVENT_ID                    = BIT(21),
+	/* AP: STA remove complete */
+	STA_REMOVE_COMPLETE_EVENT_ID             = BIT(21),
 	SOFT_GEMINI_SENSE_EVENT_ID		 = BIT(22),
 	SOFT_GEMINI_PREDICTION_EVENT_ID		 = BIT(23),
 	SOFT_GEMINI_AVALANCHE_EVENT_ID		 = BIT(24),
diff --git a/drivers/net/wireless/wl12xx/io.h b/drivers/net/wireless/wl12xx/io.h
index 84454f6d816..e6199eb5193 100644
--- a/drivers/net/wireless/wl12xx/io.h
+++ b/drivers/net/wireless/wl12xx/io.h
@@ -170,5 +170,6 @@ struct ieee80211_hw *wl1271_alloc_hw(void);
 int wl1271_free_hw(struct wl1271 *wl);
 irqreturn_t wl1271_irq(int irq, void *data);
 bool wl1271_set_block_size(struct wl1271 *wl);
+int wl1271_tx_dummy_packet(struct wl1271 *wl);
 
 #endif
diff --git a/drivers/net/wireless/wl12xx/main.c b/drivers/net/wireless/wl12xx/main.c
index 3c381ceadb9..54ac6757c39 100644
--- a/drivers/net/wireless/wl12xx/main.c
+++ b/drivers/net/wireless/wl12xx/main.c
@@ -1174,6 +1174,48 @@ static void wl1271_op_tx(struct ieee80211_hw *hw, struct sk_buff *skb)
 	spin_unlock_irqrestore(&wl->wl_lock, flags);
 }
 
+#define TX_DUMMY_PACKET_SIZE 1400
+int wl1271_tx_dummy_packet(struct wl1271 *wl)
+{
+	struct sk_buff *skb = NULL;
+	struct ieee80211_hdr_3addr *hdr;
+	int ret = 0;
+
+	skb = dev_alloc_skb(
+		sizeof(struct wl1271_tx_hw_descr) + sizeof(*hdr) +
+		TX_DUMMY_PACKET_SIZE);
+	if (!skb) {
+		wl1271_warning("failed to allocate buffer for dummy packet");
+		ret = -ENOMEM;
+		goto out;
+	}
+
+	skb_reserve(skb, sizeof(struct wl1271_tx_hw_descr));
+
+	hdr = (struct ieee80211_hdr_3addr *) skb_put(skb, sizeof(*hdr));
+	memset(hdr, 0, sizeof(*hdr));
+	hdr->frame_control = cpu_to_le16(IEEE80211_FTYPE_DATA |
+					 IEEE80211_FCTL_TODS  |
+					 IEEE80211_STYPE_NULLFUNC);
+
+	memcpy(hdr->addr1, wl->bssid, ETH_ALEN);
+	memcpy(hdr->addr2, wl->mac_addr, ETH_ALEN);
+	memcpy(hdr->addr3, wl->bssid, ETH_ALEN);
+
+	skb_put(skb, TX_DUMMY_PACKET_SIZE);
+
+	memset(skb->data, 0, TX_DUMMY_PACKET_SIZE);
+
+	skb->pkt_type = TX_PKT_TYPE_DUMMY_REQ;
+	/* CONF_TX_AC_VO */
+	skb->queue_mapping = 0;
+
+	wl1271_op_tx(wl->hw, skb);
+
+out:
+	return ret;
+}
+
 static struct notifier_block wl1271_dev_notifier = {
 	.notifier_call = wl1271_dev_notify,
 };
diff --git a/drivers/net/wireless/wl12xx/tx.c b/drivers/net/wireless/wl12xx/tx.c
index afc8505abeb..75222a68129 100644
--- a/drivers/net/wireless/wl12xx/tx.c
+++ b/drivers/net/wireless/wl12xx/tx.c
@@ -215,13 +215,29 @@ static void wl1271_tx_fill_hdr(struct wl1271 *wl, struct sk_buff *skb,
 	else
 		desc->life_time = cpu_to_le16(TX_HW_AP_MODE_PKT_LIFETIME_TU);
 
-	/* configure the tx attributes */
-	tx_attr = wl->session_counter << TX_HW_ATTR_OFST_SESSION_COUNTER;
-
 	/* queue (we use same identifiers for tid's and ac's */
 	ac = wl1271_tx_get_queue(skb_get_queue_mapping(skb));
 	desc->tid = ac;
 
+	if (skb->pkt_type == TX_PKT_TYPE_DUMMY_REQ) {
+		/*
+		 * FW expects the dummy packet to have an invalid session id -
+		 * any session id that is different than the one set in the join
+		 */
+		tx_attr = ((~wl->session_counter) <<
+			   TX_HW_ATTR_OFST_SESSION_COUNTER) &
+			   TX_HW_ATTR_SESSION_COUNTER;
+
+		tx_attr |= TX_HW_ATTR_TX_DUMMY_REQ;
+
+		/* Dummy packets require the TID to be management */
+		desc->tid = WL1271_TID_MGMT;
+	} else {
+		/* configure the tx attributes */
+		tx_attr =
+			wl->session_counter << TX_HW_ATTR_OFST_SESSION_COUNTER;
+	}
+
 	if (wl->bss_type != BSS_TYPE_AP_BSS) {
 		desc->aid = hlid;
 
@@ -587,6 +603,12 @@ static void wl1271_tx_complete_packet(struct wl1271 *wl,
 	skb = wl->tx_frames[id];
 	info = IEEE80211_SKB_CB(skb);
 
+	if (skb->pkt_type == TX_PKT_TYPE_DUMMY_REQ) {
+		dev_kfree_skb(skb);
+		wl1271_free_tx_id(wl, id);
+		return;
+	}
+
 	/* update the TX status info */
 	if (result->status == TX_SUCCESS) {
 		if (!(info->flags & IEEE80211_TX_CTL_NO_ACK))
@@ -716,10 +738,15 @@ void wl1271_tx_reset(struct wl1271 *wl)
 			while ((skb = skb_dequeue(&wl->tx_queue[i]))) {
 				wl1271_debug(DEBUG_TX, "freeing skb 0x%p",
 					     skb);
-				info = IEEE80211_SKB_CB(skb);
-				info->status.rates[0].idx = -1;
-				info->status.rates[0].count = 0;
-				ieee80211_tx_status(wl->hw, skb);
+
+				if (skb->pkt_type == TX_PKT_TYPE_DUMMY_REQ) {
+					dev_kfree_skb(skb);
+				} else {
+					info = IEEE80211_SKB_CB(skb);
+					info->status.rates[0].idx = -1;
+					info->status.rates[0].count = 0;
+					ieee80211_tx_status(wl->hw, skb);
+				}
 			}
 		}
 	}
@@ -740,21 +767,29 @@ void wl1271_tx_reset(struct wl1271 *wl)
 		wl1271_free_tx_id(wl, i);
 		wl1271_debug(DEBUG_TX, "freeing skb 0x%p", skb);
 
-		/* Remove private headers before passing the skb to mac80211 */
-		info = IEEE80211_SKB_CB(skb);
-		skb_pull(skb, sizeof(struct wl1271_tx_hw_descr));
-		if (info->control.hw_key &&
-		    info->control.hw_key->cipher == WLAN_CIPHER_SUITE_TKIP) {
-			int hdrlen = ieee80211_get_hdrlen_from_skb(skb);
-			memmove(skb->data + WL1271_TKIP_IV_SPACE, skb->data,
-				hdrlen);
-			skb_pull(skb, WL1271_TKIP_IV_SPACE);
-		}
+		if (skb->pkt_type == TX_PKT_TYPE_DUMMY_REQ) {
+			dev_kfree_skb(skb);
+		} else {
+			/*
+			 * Remove private headers before passing the skb to
+			 * mac80211
+			 */
+			info = IEEE80211_SKB_CB(skb);
+			skb_pull(skb, sizeof(struct wl1271_tx_hw_descr));
+			if (info->control.hw_key &&
+			    info->control.hw_key->cipher ==
+			    WLAN_CIPHER_SUITE_TKIP) {
+				int hdrlen = ieee80211_get_hdrlen_from_skb(skb);
+				memmove(skb->data + WL1271_TKIP_IV_SPACE,
+					skb->data, hdrlen);
+				skb_pull(skb, WL1271_TKIP_IV_SPACE);
+			}
 
-		info->status.rates[0].idx = -1;
-		info->status.rates[0].count = 0;
+			info->status.rates[0].idx = -1;
+			info->status.rates[0].count = 0;
 
-		ieee80211_tx_status(wl->hw, skb);
+			ieee80211_tx_status(wl->hw, skb);
+		}
 	}
 }
 
diff --git a/drivers/net/wireless/wl12xx/tx.h b/drivers/net/wireless/wl12xx/tx.h
index e31317717ab..6f45e9108d9 100644
--- a/drivers/net/wireless/wl12xx/tx.h
+++ b/drivers/net/wireless/wl12xx/tx.h
@@ -41,6 +41,9 @@
 					  BIT(8) | BIT(9))
 #define TX_HW_ATTR_LAST_WORD_PAD         (BIT(10) | BIT(11))
 #define TX_HW_ATTR_TX_CMPLT_REQ          BIT(12)
+#define TX_HW_ATTR_TX_DUMMY_REQ          BIT(13)
+
+#define TX_PKT_TYPE_DUMMY_REQ            5
 
 #define TX_HW_ATTR_OFST_SAVE_RETRIES     0
 #define TX_HW_ATTR_OFST_HEADER_PAD       1
@@ -55,6 +58,9 @@
 #define WL1271_TX_ALIGN_TO 4
 #define WL1271_TKIP_IV_SPACE 4
 
+/* Used for management frames and dummy packets */
+#define WL1271_TID_MGMT 7
+
 struct wl127x_tx_mem {
 	/*
 	 * Number of extra memory blocks to allocate for this packet
-- 
cgit v1.2.3-70-g09d2


From 1aed55fd784d000fb6741cefb68712d64817bd68 Mon Sep 17 00:00:00 2001
From: Arik Nemtsov <arik@wizery.com>
Date: Sun, 6 Mar 2011 16:32:18 +0200
Subject: wl12xx: 1281/1283 support - Use different FW file for AP mode
 wl127x/wl128x chips

Choose a different FW for AP-mode wl127x and wl128x chips, base on chip
ID at boot time.

Signed-off-by: Arik Nemtsov <arik@wizery.com>
Reviewed-by: Luciano Coelho <coelho@ti.com>
Signed-off-by: Luciano Coelho <coelho@ti.com>
---
 drivers/net/wireless/wl12xx/main.c   | 5 ++++-
 drivers/net/wireless/wl12xx/sdio.c   | 3 ++-
 drivers/net/wireless/wl12xx/spi.c    | 3 ++-
 drivers/net/wireless/wl12xx/wl12xx.h | 3 ++-
 4 files changed, 10 insertions(+), 4 deletions(-)

(limited to 'drivers/net/wireless/wl12xx')

diff --git a/drivers/net/wireless/wl12xx/main.c b/drivers/net/wireless/wl12xx/main.c
index 54ac6757c39..9a7ca6524d2 100644
--- a/drivers/net/wireless/wl12xx/main.c
+++ b/drivers/net/wireless/wl12xx/main.c
@@ -832,7 +832,10 @@ static int wl1271_fetch_firmware(struct wl1271 *wl)
 
 	switch (wl->bss_type) {
 	case BSS_TYPE_AP_BSS:
-		fw_name = WL1271_AP_FW_NAME;
+		if (wl->chip.id == CHIP_ID_1283_PG20)
+			fw_name = WL128X_AP_FW_NAME;
+		else
+			fw_name = WL127X_AP_FW_NAME;
 		break;
 	case BSS_TYPE_IBSS:
 	case BSS_TYPE_STA_BSS:
diff --git a/drivers/net/wireless/wl12xx/sdio.c b/drivers/net/wireless/wl12xx/sdio.c
index f6dd3dea4f3..5a2951ed6ed 100644
--- a/drivers/net/wireless/wl12xx/sdio.c
+++ b/drivers/net/wireless/wl12xx/sdio.c
@@ -361,4 +361,5 @@ MODULE_AUTHOR("Luciano Coelho <coelho@ti.com>");
 MODULE_AUTHOR("Juuso Oikarinen <juuso.oikarinen@nokia.com>");
 MODULE_FIRMWARE(WL1271_FW_NAME);
 MODULE_FIRMWARE(WL128X_FW_NAME);
-MODULE_FIRMWARE(WL1271_AP_FW_NAME);
+MODULE_FIRMWARE(WL127X_AP_FW_NAME);
+MODULE_FIRMWARE(WL128X_AP_FW_NAME);
diff --git a/drivers/net/wireless/wl12xx/spi.c b/drivers/net/wireless/wl12xx/spi.c
index f5525361f2f..7b82b5f0e49 100644
--- a/drivers/net/wireless/wl12xx/spi.c
+++ b/drivers/net/wireless/wl12xx/spi.c
@@ -493,5 +493,6 @@ MODULE_AUTHOR("Luciano Coelho <coelho@ti.com>");
 MODULE_AUTHOR("Juuso Oikarinen <juuso.oikarinen@nokia.com>");
 MODULE_FIRMWARE(WL1271_FW_NAME);
 MODULE_FIRMWARE(WL128X_FW_NAME);
-MODULE_FIRMWARE(WL1271_AP_FW_NAME);
+MODULE_FIRMWARE(WL127X_AP_FW_NAME);
+MODULE_FIRMWARE(WL128X_AP_FW_NAME);
 MODULE_ALIAS("spi:wl1271");
diff --git a/drivers/net/wireless/wl12xx/wl12xx.h b/drivers/net/wireless/wl12xx/wl12xx.h
index ad04b8337a2..890c1a54382 100644
--- a/drivers/net/wireless/wl12xx/wl12xx.h
+++ b/drivers/net/wireless/wl12xx/wl12xx.h
@@ -132,7 +132,8 @@ extern u32 wl12xx_debug_level;
 
 #define WL1271_FW_NAME "ti-connectivity/wl1271-fw-2.bin"
 #define WL128X_FW_NAME "ti-connectivity/wl128x-fw.bin"
-#define WL1271_AP_FW_NAME "ti-connectivity/wl1271-fw-ap.bin"
+#define WL127X_AP_FW_NAME "ti-connectivity/wl1271-fw-ap.bin"
+#define WL128X_AP_FW_NAME "ti-connectivity/wl128x-fw-ap.bin"
 
 /*
  * wl127x and wl128x are using the same NVS file name. However, the
-- 
cgit v1.2.3-70-g09d2


From 0830ceedbfde20c9110c59597fdffbf51886565a Mon Sep 17 00:00:00 2001
From: Shahar Levi <shahar_levi@ti.com>
Date: Sun, 6 Mar 2011 16:32:20 +0200
Subject: wl12xx: 1281/1283 support - enable chip support

Add support to wl128x chip via chip id

Signed-off-by: Shahar Levi <shahar_levi@ti.com>
Reviewed-by: Luciano Coelho <coelho@ti.com>
Signed-off-by: Luciano Coelho <coelho@ti.com>
---
 drivers/net/wireless/wl12xx/Kconfig     | 2 +-
 drivers/net/wireless/wl12xx/main.c      | 9 +++++++++
 drivers/net/wireless/wl12xx/sdio_test.c | 5 +++++
 3 files changed, 15 insertions(+), 1 deletion(-)

(limited to 'drivers/net/wireless/wl12xx')

diff --git a/drivers/net/wireless/wl12xx/Kconfig b/drivers/net/wireless/wl12xx/Kconfig
index 692ebff38fc..35ce7b0f4a6 100644
--- a/drivers/net/wireless/wl12xx/Kconfig
+++ b/drivers/net/wireless/wl12xx/Kconfig
@@ -3,7 +3,7 @@ menuconfig WL12XX_MENU
 	depends on MAC80211 && EXPERIMENTAL
 	---help---
 	  This will enable TI wl12xx driver support for the following chips:
-	  wl1271 and wl1273.
+	  wl1271, wl1273, wl1281 and wl1283.
 	  The drivers make use of the mac80211 stack.
 
 config WL12XX
diff --git a/drivers/net/wireless/wl12xx/main.c b/drivers/net/wireless/wl12xx/main.c
index 9a7ca6524d2..0b9d41f14b2 100644
--- a/drivers/net/wireless/wl12xx/main.c
+++ b/drivers/net/wireless/wl12xx/main.c
@@ -1007,6 +1007,15 @@ static int wl1271_chip_wakeup(struct wl1271 *wl)
 		if (ret < 0)
 			goto out;
 		break;
+	case CHIP_ID_1283_PG20:
+		wl1271_debug(DEBUG_BOOT, "chip id 0x%x (1283 PG20)",
+			     wl->chip.id);
+
+		ret = wl1271_setup(wl);
+		if (ret < 0)
+			goto out;
+		break;
+	case CHIP_ID_1283_PG10:
 	default:
 		wl1271_warning("unsupported chip id: 0x%x", wl->chip.id);
 		ret = -ENODEV;
diff --git a/drivers/net/wireless/wl12xx/sdio_test.c b/drivers/net/wireless/wl12xx/sdio_test.c
index c02c8704661..968249a4da3 100644
--- a/drivers/net/wireless/wl12xx/sdio_test.c
+++ b/drivers/net/wireless/wl12xx/sdio_test.c
@@ -293,6 +293,11 @@ static int wl1271_chip_wakeup(struct wl1271 *wl)
 		wl1271_notice("chip id 0x%x (1271 PG20)",
 				wl->chip.id);
 		break;
+	case CHIP_ID_1283_PG20:
+		wl1271_notice("chip id 0x%x (1283 PG20)",
+				wl->chip.id);
+		break;
+	case CHIP_ID_1283_PG10:
 	default:
 		wl1271_warning("unsupported chip id: 0x%x", wl->chip.id);
 		return -ENODEV;
-- 
cgit v1.2.3-70-g09d2


From e7ddf549f3f2da156f5c12921e6699024e80a3f4 Mon Sep 17 00:00:00 2001
From: Luciano Coelho <coelho@ti.com>
Date: Thu, 10 Mar 2011 15:24:57 +0200
Subject: wl12xx: use 1 spare TX block instead of two

All the new firmware versions (>=6.1.3.50.58 for STA and >=6.2.0.0.47
for AP) use 1 spare TX block.  We still want to support older
firmwares that require 2 spare blocks, so added a quirk to handle the
difference.

Also implemented a generic way of setting quirks that depend on the
firmware revision.

Signed-off-by: Luciano Coelho <coelho@ti.com>
---
 drivers/net/wireless/wl12xx/main.c   | 24 ++++++++++++++++++++++++
 drivers/net/wireless/wl12xx/tx.c     | 10 ++++++++--
 drivers/net/wireless/wl12xx/tx.h     |  1 -
 drivers/net/wireless/wl12xx/wl12xx.h | 28 +++++++++++++++++++++++++---
 4 files changed, 57 insertions(+), 6 deletions(-)

(limited to 'drivers/net/wireless/wl12xx')

diff --git a/drivers/net/wireless/wl12xx/main.c b/drivers/net/wireless/wl12xx/main.c
index 0b9d41f14b2..db7ab856363 100644
--- a/drivers/net/wireless/wl12xx/main.c
+++ b/drivers/net/wireless/wl12xx/main.c
@@ -1040,6 +1040,24 @@ out:
 	return ret;
 }
 
+static unsigned int wl1271_get_fw_ver_quirks(struct wl1271 *wl)
+{
+	unsigned int quirks = 0;
+	unsigned int *fw_ver = wl->chip.fw_ver;
+
+	/* Only for wl127x */
+	if ((fw_ver[FW_VER_CHIP] == FW_VER_CHIP_WL127X) &&
+	    /* Check STA version */
+	    (((fw_ver[FW_VER_IF_TYPE] == FW_VER_IF_TYPE_STA) &&
+	      (fw_ver[FW_VER_MINOR] < FW_VER_MINOR_1_SPARE_STA_MIN)) ||
+	     /* Check AP version */
+	     ((fw_ver[FW_VER_IF_TYPE] == FW_VER_IF_TYPE_AP) &&
+	      (fw_ver[FW_VER_MINOR] < FW_VER_MINOR_1_SPARE_AP_MIN))))
+		quirks |= WL12XX_QUIRK_USE_2_SPARE_BLOCKS;
+
+	return quirks;
+}
+
 int wl1271_plt_start(struct wl1271 *wl)
 {
 	int retries = WL1271_BOOT_RETRIES;
@@ -1075,6 +1093,9 @@ int wl1271_plt_start(struct wl1271 *wl)
 		wl->state = WL1271_STATE_PLT;
 		wl1271_notice("firmware booted in PLT mode (%s)",
 			      wl->chip.fw_ver_str);
+
+		/* Check if any quirks are needed with older fw versions */
+		wl->quirks |= wl1271_get_fw_ver_quirks(wl);
 		goto out;
 
 irq_disable:
@@ -1353,6 +1374,9 @@ power_off:
 	strncpy(wiphy->fw_version, wl->chip.fw_ver_str,
 		sizeof(wiphy->fw_version));
 
+	/* Check if any quirks are needed with older fw versions */
+	wl->quirks |= wl1271_get_fw_ver_quirks(wl);
+
 	/*
 	 * Now we know if 11a is supported (info from the NVS), so disable
 	 * 11a channels if not supported
diff --git a/drivers/net/wireless/wl12xx/tx.c b/drivers/net/wireless/wl12xx/tx.c
index 75222a68129..109878c3246 100644
--- a/drivers/net/wireless/wl12xx/tx.c
+++ b/drivers/net/wireless/wl12xx/tx.c
@@ -135,6 +135,12 @@ static int wl1271_tx_allocate(struct wl1271 *wl, struct sk_buff *skb, u32 extra,
 	u32 len;
 	u32 total_blocks;
 	int id, ret = -EBUSY;
+	u32 spare_blocks;
+
+	if (unlikely(wl->quirks & WL12XX_QUIRK_USE_2_SPARE_BLOCKS))
+		spare_blocks = 2;
+	else
+		spare_blocks = 1;
 
 	if (buf_offset + total_len > WL1271_AGGR_BUFFER_SIZE)
 		return -EAGAIN;
@@ -152,7 +158,7 @@ static int wl1271_tx_allocate(struct wl1271 *wl, struct sk_buff *skb, u32 extra,
 		len = total_len;
 
 	total_blocks = (len + TX_HW_BLOCK_SIZE - 1) / TX_HW_BLOCK_SIZE +
-		TX_HW_BLOCK_SPARE;
+		spare_blocks;
 
 	if (total_blocks <= wl->tx_blocks_available) {
 		desc = (struct wl1271_tx_hw_descr *)skb_push(
@@ -162,7 +168,7 @@ static int wl1271_tx_allocate(struct wl1271 *wl, struct sk_buff *skb, u32 extra,
 		if (wl->chip.id == CHIP_ID_1283_PG20) {
 			desc->wl128x_mem.total_mem_blocks = total_blocks;
 		} else {
-			desc->wl127x_mem.extra_blocks = TX_HW_BLOCK_SPARE;
+			desc->wl127x_mem.extra_blocks = spare_blocks;
 			desc->wl127x_mem.total_mem_blocks = total_blocks;
 		}
 
diff --git a/drivers/net/wireless/wl12xx/tx.h b/drivers/net/wireless/wl12xx/tx.h
index 6f45e9108d9..a3877ba32d3 100644
--- a/drivers/net/wireless/wl12xx/tx.h
+++ b/drivers/net/wireless/wl12xx/tx.h
@@ -25,7 +25,6 @@
 #ifndef __TX_H__
 #define __TX_H__
 
-#define TX_HW_BLOCK_SPARE                2
 #define TX_HW_BLOCK_SIZE                 252
 
 #define TX_HW_MGMT_PKT_LIFETIME_TU       2000
diff --git a/drivers/net/wireless/wl12xx/wl12xx.h b/drivers/net/wireless/wl12xx/wl12xx.h
index 890c1a54382..b04481aadf9 100644
--- a/drivers/net/wireless/wl12xx/wl12xx.h
+++ b/drivers/net/wireless/wl12xx/wl12xx.h
@@ -207,13 +207,29 @@ struct wl1271_partition_set {
 
 struct wl1271;
 
-#define WL12XX_NUM_FW_VER 5
+enum {
+	FW_VER_CHIP,
+	FW_VER_IF_TYPE,
+	FW_VER_MAJOR,
+	FW_VER_SUBTYPE,
+	FW_VER_MINOR,
+
+	NUM_FW_VER
+};
+
+#define FW_VER_CHIP_WL127X 6
+#define FW_VER_CHIP_WL128X 7
+
+#define FW_VER_IF_TYPE_STA 1
+#define FW_VER_IF_TYPE_AP  2
+
+#define FW_VER_MINOR_1_SPARE_STA_MIN 58
+#define FW_VER_MINOR_1_SPARE_AP_MIN  47
 
-/* FIXME: I'm not sure about this structure name */
 struct wl1271_chip {
 	u32 id;
 	char fw_ver_str[ETHTOOL_BUSINFO_LEN];
-	unsigned int fw_ver[WL12XX_NUM_FW_VER];
+	unsigned int fw_ver[NUM_FW_VER];
 };
 
 struct wl1271_stats {
@@ -594,4 +610,10 @@ int wl1271_plt_stop(struct wl1271 *wl);
 /* Each RX/TX transaction requires an end-of-transaction transfer */
 #define WL12XX_QUIRK_END_OF_TRANSACTION	BIT(0)
 
+/*
+ * Older firmwares use 2 spare TX blocks
+ * (for STA < 6.1.3.50.58 or for AP < 6.2.0.0.47)
+ */
+#define WL12XX_QUIRK_USE_2_SPARE_BLOCKS BIT(1)
+
 #endif
-- 
cgit v1.2.3-70-g09d2


From 0af0467f09207cbbeb387d2e09ea539534c6655c Mon Sep 17 00:00:00 2001
From: Juuso Oikarinen <juuso.oikarinen@nokia.com>
Date: Thu, 10 Mar 2011 10:01:43 +0200
Subject: wl12xx: Fix potential incorrect band in rx-status

The rx-status passed to mac80211 along with each received frame contains the
band on which the frame was received. Under certain circumstances, this band
information may be incorrect, causing in worst case a WARNING from mac80211,
and causes the received frame to be dropped.

This scenario mainly occurs when performing connected-mode scans, when the
received scan results are from the other band than the one currently
associated to.

[Since desc_band doesn't exist anymore, use status->band in the later
call to ieee80211_channel_to_frequency() to fix compilation -- Luca]

Signed-off-by: Juuso Oikarinen <juuso.oikarinen@nokia.com>
Reviewed-by: Luciano Coelho <coelho@ti.com>
Signed-off-by: Luciano Coelho <coelho@ti.com>
---
 drivers/net/wireless/wl12xx/rx.c | 13 +++++--------
 1 file changed, 5 insertions(+), 8 deletions(-)

(limited to 'drivers/net/wireless/wl12xx')

diff --git a/drivers/net/wireless/wl12xx/rx.c b/drivers/net/wireless/wl12xx/rx.c
index 132b0cab569..2a581495d5c 100644
--- a/drivers/net/wireless/wl12xx/rx.c
+++ b/drivers/net/wireless/wl12xx/rx.c
@@ -48,18 +48,14 @@ static void wl1271_rx_status(struct wl1271 *wl,
 			     struct ieee80211_rx_status *status,
 			     u8 beacon)
 {
-	enum ieee80211_band desc_band;
-
 	memset(status, 0, sizeof(struct ieee80211_rx_status));
 
-	status->band = wl->band;
-
 	if ((desc->flags & WL1271_RX_DESC_BAND_MASK) == WL1271_RX_DESC_BAND_BG)
-		desc_band = IEEE80211_BAND_2GHZ;
+		status->band = IEEE80211_BAND_2GHZ;
 	else
-		desc_band = IEEE80211_BAND_5GHZ;
+		status->band = IEEE80211_BAND_5GHZ;
 
-	status->rate_idx = wl1271_rate_to_idx(desc->rate, desc_band);
+	status->rate_idx = wl1271_rate_to_idx(desc->rate, status->band);
 
 #ifdef CONFIG_WL12XX_HT
 	/* 11n support */
@@ -76,7 +72,8 @@ static void wl1271_rx_status(struct wl1271 *wl,
 	 */
 	wl->noise = desc->rssi - (desc->snr >> 1);
 
-	status->freq = ieee80211_channel_to_frequency(desc->channel, desc_band);
+	status->freq = ieee80211_channel_to_frequency(desc->channel,
+						      status->band);
 
 	if (desc->flags & WL1271_RX_DESC_ENCRYPT_MASK) {
 		status->flag |= RX_FLAG_IV_STRIPPED | RX_FLAG_MMIC_STRIPPED;
-- 
cgit v1.2.3-70-g09d2


From 871d0c3ba32c2d2e1e7d9ac0d231a440d2653fc5 Mon Sep 17 00:00:00 2001
From: Shahar Levi <shahar_levi@ti.com>
Date: Sun, 13 Mar 2011 11:24:40 +0200
Subject: wl12xx: Add support for 11n Rx STBC one spatial stream

The wl12xx chip supports one Rx STBC spatial stream.  Announce this in
the HT capabilities info field.

Signed-off-by: Shahar Levi <shahar_levi@ti.com>
Signed-off-by: Luciano Coelho <coelho@ti.com>
---
 drivers/net/wireless/wl12xx/main.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

(limited to 'drivers/net/wireless/wl12xx')

diff --git a/drivers/net/wireless/wl12xx/main.c b/drivers/net/wireless/wl12xx/main.c
index db7ab856363..28048474827 100644
--- a/drivers/net/wireless/wl12xx/main.c
+++ b/drivers/net/wireless/wl12xx/main.c
@@ -3132,7 +3132,8 @@ static const u8 wl1271_rate_to_idx_2ghz[] = {
 
 #ifdef CONFIG_WL12XX_HT
 #define WL12XX_HT_CAP { \
-	.cap = IEEE80211_HT_CAP_GRN_FLD | IEEE80211_HT_CAP_SGI_20, \
+	.cap = IEEE80211_HT_CAP_GRN_FLD | IEEE80211_HT_CAP_SGI_20 | \
+	       (1 << IEEE80211_HT_CAP_RX_STBC_SHIFT), \
 	.ht_supported = true, \
 	.ampdu_factor = IEEE80211_HT_MAX_AMPDU_8K, \
 	.ampdu_density = IEEE80211_HT_MPDU_DENSITY_8, \
-- 
cgit v1.2.3-70-g09d2


From 958b20e068be2c6267c2b5764babf15b0d4f5c69 Mon Sep 17 00:00:00 2001
From: Ohad Ben-Cohen <ohad@wizery.com>
Date: Mon, 14 Mar 2011 18:53:10 +0200
Subject: wl12xx: update bet_max_consecutive

Allow early termination of 50 consecutive beacons.

This value is the recommended one by the 12xx's system/RF team,
and tests show that power consumption is improved as expected.

Reported-by: Ruthy Zaphir <ruthyz@ti.com>
Tested-by: Danil Shalumov <danils@ti.com>
Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com>
Signed-off-by: Luciano Coelho <coelho@ti.com>
---
 drivers/net/wireless/wl12xx/main.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'drivers/net/wireless/wl12xx')

diff --git a/drivers/net/wireless/wl12xx/main.c b/drivers/net/wireless/wl12xx/main.c
index 28048474827..dd49b2292b5 100644
--- a/drivers/net/wireless/wl12xx/main.c
+++ b/drivers/net/wireless/wl12xx/main.c
@@ -254,7 +254,7 @@ static struct conf_drv_settings default_conf = {
 		.ps_poll_threshold           = 10,
 		.ps_poll_recovery_period     = 700,
 		.bet_enable                  = CONF_BET_MODE_ENABLE,
-		.bet_max_consecutive         = 10,
+		.bet_max_consecutive         = 50,
 		.psm_entry_retries           = 5,
 		.psm_exit_retries            = 255,
 		.psm_entry_nullfunc_retries  = 3,
-- 
cgit v1.2.3-70-g09d2


From 1d732e8cf3dcc09d7c862b6c12f876533529073d Mon Sep 17 00:00:00 2001
From: Arik Nemtsov <arik@wizery.com>
Date: Fri, 18 Mar 2011 14:49:57 +0200
Subject: wl12xx: Clamp byte mode transfers for 128x chips

On wl128x based devices, when TX packets are aggregated, each packet
size must be aligned to the SDIO block size, and sent using block mode
transfers.

The block size is set to 256 bytes, which is less than the maximum
possible byte transfer. Thus, if two small packets (< 256 bytes) are
aggregated, the aggregation buffer size would be 512, and will be sent
using byte mode transfers. This can have undesired side effects.

Fix this by setting the MMC_QUIRK_BLKSZ_FOR_BYTE_MODE mmc card quirk.
For 127x chips this has no effect, as the block size is set to 512
bytes.

Signed-off-by: Arik Nemtsov <arik@wizery.com>
Signed-off-by: Ido Yariv <ido@wizery.com>
Signed-off-by: Luciano Coelho <coelho@ti.com>
---
 drivers/net/wireless/wl12xx/sdio.c      | 3 +++
 drivers/net/wireless/wl12xx/sdio_test.c | 3 +++
 2 files changed, 6 insertions(+)

(limited to 'drivers/net/wireless/wl12xx')

diff --git a/drivers/net/wireless/wl12xx/sdio.c b/drivers/net/wireless/wl12xx/sdio.c
index 5a2951ed6ed..2ade222f7cb 100644
--- a/drivers/net/wireless/wl12xx/sdio.c
+++ b/drivers/net/wireless/wl12xx/sdio.c
@@ -246,6 +246,9 @@ static int __devinit wl1271_probe(struct sdio_func *func,
 	/* Grab access to FN0 for ELP reg. */
 	func->card->quirks |= MMC_QUIRK_LENIENT_FN0;
 
+	/* Use block mode for transferring over one block size of data */
+	func->card->quirks |= MMC_QUIRK_BLKSZ_FOR_BYTE_MODE;
+
 	wlan_data = wl12xx_get_platform_data();
 	if (IS_ERR(wlan_data)) {
 		ret = PTR_ERR(wlan_data);
diff --git a/drivers/net/wireless/wl12xx/sdio_test.c b/drivers/net/wireless/wl12xx/sdio_test.c
index 968249a4da3..f2891539287 100644
--- a/drivers/net/wireless/wl12xx/sdio_test.c
+++ b/drivers/net/wireless/wl12xx/sdio_test.c
@@ -417,6 +417,9 @@ static int __devinit wl1271_probe(struct sdio_func *func,
 	/* Grab access to FN0 for ELP reg. */
 	func->card->quirks |= MMC_QUIRK_LENIENT_FN0;
 
+	/* Use block mode for transferring over one block size of data */
+	func->card->quirks |= MMC_QUIRK_BLKSZ_FOR_BYTE_MODE;
+
 	wlan_data = wl12xx_get_platform_data();
 	if (IS_ERR(wlan_data)) {
 		ret = PTR_ERR(wlan_data);
-- 
cgit v1.2.3-70-g09d2


From f9f774c17e19da6f98bd7b57527f55d0ec920fce Mon Sep 17 00:00:00 2001
From: Juuso Oikarinen <juuso.oikarinen@nokia.com>
Date: Mon, 21 Mar 2011 10:43:36 +0200
Subject: wl12xx: Add mutex protection for interface list

The interface list maintained in main.c is not mutex protected. This could
cause issues, as the list is accessed from notifier chains.

Signed-off-by: Juuso Oikarinen <juuso.oikarinen@nokia.com>
Reviewed-by: Luciano Coelho <coelho@ti.com>
Signed-off-by: Luciano Coelho <coelho@ti.com>
---
 drivers/net/wireless/wl12xx/main.c | 7 +++++++
 1 file changed, 7 insertions(+)

(limited to 'drivers/net/wireless/wl12xx')

diff --git a/drivers/net/wireless/wl12xx/main.c b/drivers/net/wireless/wl12xx/main.c
index dd49b2292b5..72e84a209e6 100644
--- a/drivers/net/wireless/wl12xx/main.c
+++ b/drivers/net/wireless/wl12xx/main.c
@@ -339,6 +339,7 @@ static struct platform_device wl1271_device = {
 	},
 };
 
+static DEFINE_MUTEX(wl_list_mutex);
 static LIST_HEAD(wl_list);
 
 static int wl1271_dev_notify(struct notifier_block *me, unsigned long what,
@@ -369,10 +370,12 @@ static int wl1271_dev_notify(struct notifier_block *me, unsigned long what,
 		return NOTIFY_DONE;
 
 	wl_temp = hw->priv;
+	mutex_lock(&wl_list_mutex);
 	list_for_each_entry(wl, &wl_list, list) {
 		if (wl == wl_temp)
 			break;
 	}
+	mutex_unlock(&wl_list_mutex);
 	if (wl != wl_temp)
 		return NOTIFY_DONE;
 
@@ -1390,8 +1393,10 @@ power_off:
 out:
 	mutex_unlock(&wl->mutex);
 
+	mutex_lock(&wl_list_mutex);
 	if (!ret)
 		list_add(&wl->list, &wl_list);
+	mutex_unlock(&wl_list_mutex);
 
 	return ret;
 }
@@ -1404,7 +1409,9 @@ static void __wl1271_op_remove_interface(struct wl1271 *wl)
 
 	wl1271_info("down");
 
+	mutex_lock(&wl_list_mutex);
 	list_del(&wl->list);
+	mutex_unlock(&wl_list_mutex);
 
 	WARN_ON(wl->state != WL1271_STATE_ON);
 
-- 
cgit v1.2.3-70-g09d2


From db674d249c1fa20fd6731048f41646b3a2e8bdf5 Mon Sep 17 00:00:00 2001
From: Eliad Peller <eliad@wizery.com>
Date: Wed, 16 Mar 2011 23:03:54 +0200
Subject: wl12xx: set the actual tid instead of the ac

When passing a tx frame, the driver incorrectly set desc->tid
with the ac instead of the actual tid.

It has some serious implications when using 802.11n + QoS,
as the fw starts a BlockAck with the wrong tid (which finally
cause beacon loss and disconnection / some fw crash)

Fix it by using the actual tid stored in skb->priority.

Reported-by: Shahar Levi <shahar_levi@ti.com>
Signed-off-by: Eliad Peller <eliad@wizery.com>
Reviewed-by: Juuso Oikarinen <juuso.oikarinen@nokia.com>
Signed-off-by: Luciano Coelho <coelho@ti.com>
---
 drivers/net/wireless/wl12xx/tx.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

(limited to 'drivers/net/wireless/wl12xx')

diff --git a/drivers/net/wireless/wl12xx/tx.c b/drivers/net/wireless/wl12xx/tx.c
index 109878c3246..f3031cdd173 100644
--- a/drivers/net/wireless/wl12xx/tx.c
+++ b/drivers/net/wireless/wl12xx/tx.c
@@ -221,9 +221,9 @@ static void wl1271_tx_fill_hdr(struct wl1271 *wl, struct sk_buff *skb,
 	else
 		desc->life_time = cpu_to_le16(TX_HW_AP_MODE_PKT_LIFETIME_TU);
 
-	/* queue (we use same identifiers for tid's and ac's */
+	/* queue */
 	ac = wl1271_tx_get_queue(skb_get_queue_mapping(skb));
-	desc->tid = ac;
+	desc->tid = skb->priority;
 
 	if (skb->pkt_type == TX_PKT_TYPE_DUMMY_REQ) {
 		/*
-- 
cgit v1.2.3-70-g09d2


From 18b92ffaf33c862e852992e82e17b9fffca8d5a4 Mon Sep 17 00:00:00 2001
From: Luciano Coelho <coelho@ti.com>
Date: Mon, 21 Mar 2011 16:35:21 +0200
Subject: wl12xx: set the skbuff priority for dummy packets

The firmware requires dummy packets to be sent using TID 7
(WL1271_TID_MGMT).  Instead of hardcoding it in the tx_fill_hdr()
function, set it when creating the packet itself.

This requires Eliad's fix to set the actual TID in the TX descriptor.

Cc: Ido Yariv <ido@wizery.com>
Signed-off-by: Luciano Coelho <coelho@ti.com>
---
 drivers/net/wireless/wl12xx/main.c | 2 ++
 drivers/net/wireless/wl12xx/tx.c   | 3 ---
 2 files changed, 2 insertions(+), 3 deletions(-)

(limited to 'drivers/net/wireless/wl12xx')

diff --git a/drivers/net/wireless/wl12xx/main.c b/drivers/net/wireless/wl12xx/main.c
index 72e84a209e6..59e0f79e399 100644
--- a/drivers/net/wireless/wl12xx/main.c
+++ b/drivers/net/wireless/wl12xx/main.c
@@ -1243,6 +1243,8 @@ int wl1271_tx_dummy_packet(struct wl1271 *wl)
 	memset(skb->data, 0, TX_DUMMY_PACKET_SIZE);
 
 	skb->pkt_type = TX_PKT_TYPE_DUMMY_REQ;
+	/* Dummy packets require the TID to be management */
+	skb->priority = WL1271_TID_MGMT;
 	/* CONF_TX_AC_VO */
 	skb->queue_mapping = 0;
 
diff --git a/drivers/net/wireless/wl12xx/tx.c b/drivers/net/wireless/wl12xx/tx.c
index f3031cdd173..db9e47e09fb 100644
--- a/drivers/net/wireless/wl12xx/tx.c
+++ b/drivers/net/wireless/wl12xx/tx.c
@@ -235,9 +235,6 @@ static void wl1271_tx_fill_hdr(struct wl1271 *wl, struct sk_buff *skb,
 			   TX_HW_ATTR_SESSION_COUNTER;
 
 		tx_attr |= TX_HW_ATTR_TX_DUMMY_REQ;
-
-		/* Dummy packets require the TID to be management */
-		desc->tid = WL1271_TID_MGMT;
 	} else {
 		/* configure the tx attributes */
 		tx_attr =
-- 
cgit v1.2.3-70-g09d2


From d9482e2b5132fd40f8de528af6bb715accbab11d Mon Sep 17 00:00:00 2001
From: Luciano Coelho <coelho@ti.com>
Date: Mon, 21 Mar 2011 17:58:32 +0200
Subject: wl12xx: fix SG BT load value to reflect its new meaning

The Soft Gemini BT load ratio value has changed its meaning with FW
version 6.1.0.0.310.  It now means the passive scan compensation
percentage during A2DP EDR.  Instead of 50, we need to use 200.

Fix the SG configuration accordingly.

Signed-off-by: Luciano Coelho <coelho@ti.com>
---
 drivers/net/wireless/wl12xx/main.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'drivers/net/wireless/wl12xx')

diff --git a/drivers/net/wireless/wl12xx/main.c b/drivers/net/wireless/wl12xx/main.c
index 59e0f79e399..916ebd1d414 100644
--- a/drivers/net/wireless/wl12xx/main.c
+++ b/drivers/net/wireless/wl12xx/main.c
@@ -54,7 +54,7 @@ static struct conf_drv_settings default_conf = {
 			[CONF_SG_BT_PER_THRESHOLD]                  = 7500,
 			[CONF_SG_HV3_MAX_OVERRIDE]                  = 0,
 			[CONF_SG_BT_NFS_SAMPLE_INTERVAL]            = 400,
-			[CONF_SG_BT_LOAD_RATIO]                     = 50,
+			[CONF_SG_BT_LOAD_RATIO]                     = 200,
 			[CONF_SG_AUTO_PS_MODE]                      = 1,
 			[CONF_SG_AUTO_SCAN_PROBE_REQ]               = 170,
 			[CONF_SG_ACTIVE_SCAN_DURATION_FACTOR_HV3]   = 50,
-- 
cgit v1.2.3-70-g09d2


From 4623ec7d97afaf7a8489036e2c2e71e8349716b4 Mon Sep 17 00:00:00 2001
From: Luciano Coelho <coelho@ti.com>
Date: Mon, 21 Mar 2011 19:26:41 +0200
Subject: wl12xx: fix a couple of sparse warnings about undeclared functions

Fix the following sparse warnings:

drivers/net/wireless/wl12xx/main.c:1129:5: warning: symbol '__wl1271_plt_stop' was not declared. Should it be static?
drivers/net/wireless/wl12xx/main.c:2988:5: warning: symbol 'wl1271_op_ampdu_action' was not declared. Should it be static?

Both functions should be static.

Signed-off-by: Luciano Coelho <coelho@ti.com>
---
 drivers/net/wireless/wl12xx/main.c | 11 ++++++-----
 1 file changed, 6 insertions(+), 5 deletions(-)

(limited to 'drivers/net/wireless/wl12xx')

diff --git a/drivers/net/wireless/wl12xx/main.c b/drivers/net/wireless/wl12xx/main.c
index 916ebd1d414..85cb4daac9a 100644
--- a/drivers/net/wireless/wl12xx/main.c
+++ b/drivers/net/wireless/wl12xx/main.c
@@ -1126,7 +1126,7 @@ out:
 	return ret;
 }
 
-int __wl1271_plt_stop(struct wl1271 *wl)
+static int __wl1271_plt_stop(struct wl1271 *wl)
 {
 	int ret = 0;
 
@@ -2985,10 +2985,11 @@ out:
 	return ret;
 }
 
-int wl1271_op_ampdu_action(struct ieee80211_hw *hw, struct ieee80211_vif *vif,
-			   enum ieee80211_ampdu_mlme_action action,
-			   struct ieee80211_sta *sta, u16 tid, u16 *ssn,
-			   u8 buf_size)
+static int wl1271_op_ampdu_action(struct ieee80211_hw *hw,
+				  struct ieee80211_vif *vif,
+				  enum ieee80211_ampdu_mlme_action action,
+				  struct ieee80211_sta *sta, u16 tid, u16 *ssn,
+				  u8 buf_size)
 {
 	struct wl1271 *wl = hw->priv;
 	int ret;
-- 
cgit v1.2.3-70-g09d2


From 4a31c11c7d8c482598754a577a8fb71abb61ffa0 Mon Sep 17 00:00:00 2001
From: Luciano Coelho <coelho@ti.com>
Date: Mon, 21 Mar 2011 23:16:14 +0200
Subject: wl12xx: use a bitmask instead of list of booleans in scanned_ch

We were using an array of booleans to mark the channels we had already
scanned.  This was causing a sparse error, because bool is not a type
with defined size.  To fix this, use bitmasks instead, which is much
cleaner anyway.

Thanks Johannes Berg for the idea.

Signed-off-by: Luciano Coelho <coelho@ti.com>
---
 drivers/net/wireless/wl12xx/main.c   |  7 +++++--
 drivers/net/wireless/wl12xx/scan.c   | 17 ++++++++++-------
 drivers/net/wireless/wl12xx/wl12xx.h |  3 ++-
 3 files changed, 17 insertions(+), 10 deletions(-)

(limited to 'drivers/net/wireless/wl12xx')

diff --git a/drivers/net/wireless/wl12xx/main.c b/drivers/net/wireless/wl12xx/main.c
index 85cb4daac9a..9663326c0df 100644
--- a/drivers/net/wireless/wl12xx/main.c
+++ b/drivers/net/wireless/wl12xx/main.c
@@ -1423,8 +1423,7 @@ static void __wl1271_op_remove_interface(struct wl1271 *wl)
 
 	if (wl->scan.state != WL1271_SCAN_STATE_IDLE) {
 		wl->scan.state = WL1271_SCAN_STATE_IDLE;
-		kfree(wl->scan.scanned_ch);
-		wl->scan.scanned_ch = NULL;
+		memset(wl->scan.scanned_ch, 0, sizeof(wl->scan.scanned_ch));
 		wl->scan.req = NULL;
 		ieee80211_scan_completed(wl->hw, true);
 	}
@@ -3502,6 +3501,10 @@ int wl1271_init_ieee80211(struct wl1271 *wl)
 	wl->hw->wiphy->max_scan_ie_len = WL1271_CMD_TEMPL_MAX_SIZE -
 			sizeof(struct ieee80211_header);
 
+	/* make sure all our channels fit in the scanned_ch bitmask */
+	BUILD_BUG_ON(ARRAY_SIZE(wl1271_channels) +
+		     ARRAY_SIZE(wl1271_channels_5ghz) >
+		     WL1271_MAX_CHANNELS);
 	/*
 	 * We keep local copies of the band structs because we need to
 	 * modify them on a per-device basis.
diff --git a/drivers/net/wireless/wl12xx/scan.c b/drivers/net/wireless/wl12xx/scan.c
index 420653a2859..5d0544c8f3f 100644
--- a/drivers/net/wireless/wl12xx/scan.c
+++ b/drivers/net/wireless/wl12xx/scan.c
@@ -48,8 +48,7 @@ void wl1271_scan_complete_work(struct work_struct *work)
 		goto out;
 
 	wl->scan.state = WL1271_SCAN_STATE_IDLE;
-	kfree(wl->scan.scanned_ch);
-	wl->scan.scanned_ch = NULL;
+	memset(wl->scan.scanned_ch, 0, sizeof(wl->scan.scanned_ch));
 	wl->scan.req = NULL;
 	ieee80211_scan_completed(wl->hw, false);
 
@@ -87,7 +86,7 @@ static int wl1271_get_scan_channels(struct wl1271 *wl,
 
 		flags = req->channels[i]->flags;
 
-		if (!wl->scan.scanned_ch[i] &&
+		if (!test_bit(i, wl->scan.scanned_ch) &&
 		    !(flags & IEEE80211_CHAN_DISABLED) &&
 		    ((!!(flags & IEEE80211_CHAN_PASSIVE_SCAN)) == passive) &&
 		    (req->channels[i]->band == band)) {
@@ -124,7 +123,7 @@ static int wl1271_get_scan_channels(struct wl1271 *wl,
 			memset(&channels[j].bssid_msb, 0xff, 2);
 
 			/* Mark the channels we already used */
-			wl->scan.scanned_ch[i] = true;
+			set_bit(i, wl->scan.scanned_ch);
 
 			j++;
 		}
@@ -291,6 +290,12 @@ void wl1271_scan_stm(struct wl1271 *wl)
 int wl1271_scan(struct wl1271 *wl, const u8 *ssid, size_t ssid_len,
 		struct cfg80211_scan_request *req)
 {
+	/*
+	 * cfg80211 should guarantee that we don't get more channels
+	 * than what we have registered.
+	 */
+	BUG_ON(req->n_channels > WL1271_MAX_CHANNELS);
+
 	if (wl->scan.state != WL1271_SCAN_STATE_IDLE)
 		return -EBUSY;
 
@@ -304,10 +309,8 @@ int wl1271_scan(struct wl1271 *wl, const u8 *ssid, size_t ssid_len,
 	}
 
 	wl->scan.req = req;
+	memset(wl->scan.scanned_ch, 0, sizeof(wl->scan.scanned_ch));
 
-	wl->scan.scanned_ch = kcalloc(req->n_channels,
-				      sizeof(*wl->scan.scanned_ch),
-				      GFP_KERNEL);
 	/* we assume failure so that timeout scenarios are handled correctly */
 	wl->scan.failed = true;
 	ieee80211_queue_delayed_work(wl->hw, &wl->scan_complete_work,
diff --git a/drivers/net/wireless/wl12xx/wl12xx.h b/drivers/net/wireless/wl12xx/wl12xx.h
index b04481aadf9..ba98e185384 100644
--- a/drivers/net/wireless/wl12xx/wl12xx.h
+++ b/drivers/net/wireless/wl12xx/wl12xx.h
@@ -302,9 +302,10 @@ struct wl1271_rx_mem_pool_addr {
 	u32 addr_extra;
 };
 
+#define WL1271_MAX_CHANNELS 64
 struct wl1271_scan {
 	struct cfg80211_scan_request *req;
-	bool *scanned_ch;
+	unsigned long scanned_ch[BITS_TO_LONGS(WL1271_MAX_CHANNELS)];
 	bool failed;
 	u8 state;
 	u8 ssid[IW_ESSID_MAX_SIZE+1];
-- 
cgit v1.2.3-70-g09d2


From 17e672d6e4b5a8a3f330a70dfd58d25a2cb497b5 Mon Sep 17 00:00:00 2001
From: Arik Nemtsov <arik@wizery.com>
Date: Tue, 22 Mar 2011 10:07:47 +0200
Subject: wl12xx: configure channel/band while FW is off

Initialize the channel and band from mac80211 conf even when the FW is
not yet loaded. This mitigates a bug in AP-mode where the channel was
never changed from its initial setting after FW boot and was therefore
never configured to FW.

Reported-by: Alexander Boukaty <alexanderb@ti.com>
Signed-off-by: Arik Nemtsov <arik@wizery.com>
Signed-off-by: Luciano Coelho <coelho@ti.com>
---
 drivers/net/wireless/wl12xx/main.c | 7 ++++++-
 1 file changed, 6 insertions(+), 1 deletion(-)

(limited to 'drivers/net/wireless/wl12xx')

diff --git a/drivers/net/wireless/wl12xx/main.c b/drivers/net/wireless/wl12xx/main.c
index 9663326c0df..5545c3b94d2 100644
--- a/drivers/net/wireless/wl12xx/main.c
+++ b/drivers/net/wireless/wl12xx/main.c
@@ -1706,7 +1706,12 @@ static int wl1271_op_config(struct ieee80211_hw *hw, u32 changed)
 	mutex_lock(&wl->mutex);
 
 	if (unlikely(wl->state == WL1271_STATE_OFF)) {
-		ret = -EAGAIN;
+		/* we support configuring the channel and band while off */
+		if ((changed & IEEE80211_CONF_CHANGE_CHANNEL)) {
+			wl->band = conf->channel->band;
+			wl->channel = channel;
+		}
+
 		goto out;
 	}
 
-- 
cgit v1.2.3-70-g09d2


From c1b193eb6557279d037ab18c00ab628c6c78847f Mon Sep 17 00:00:00 2001
From: Eliad Peller <eliad@wizery.com>
Date: Wed, 23 Mar 2011 22:22:15 +0200
Subject: wl12xx: rearrange some ELP wake_up/sleep calls

ELP (Extremely/Enhanced Low Power, or something like that ;)) refers to
the powerstate of the 12xx chip, in which very low power is consumed,
and no commands (from the host) can be issued until the chip is woken up.

Wakeup/sleep commands must be protected by a wl->mutex, so it's generally
a good idea to call wakeup/sleep along with the mutex lock/unlock (where
needed). However, in some places the wl12xx driver calls wakeup/sleep in
some "inner" functions. This result in some "nested" wakeup/sleep calls
which might end up letting the chip go to sleep prematurely (e.g. during
event handling).

Fix it by rearranging the elp calls to come along with mutex_lock/unlock.

Signed-off-by: Eliad Peller <eliad@wizery.com>
Signed-off-by: Ido Yariv <ido@wizery.com>
Signed-off-by: Luciano Coelho <coelho@ti.com>
---
 drivers/net/wireless/wl12xx/event.c | 11 +++++-----
 drivers/net/wireless/wl12xx/main.c  | 43 ++++++++++++++++++-------------------
 drivers/net/wireless/wl12xx/ps.c    |  3 ---
 drivers/net/wireless/wl12xx/tx.c    | 22 ++++++++-----------
 4 files changed, 36 insertions(+), 43 deletions(-)

(limited to 'drivers/net/wireless/wl12xx')

diff --git a/drivers/net/wireless/wl12xx/event.c b/drivers/net/wireless/wl12xx/event.c
index 413d901985f..ae69330e807 100644
--- a/drivers/net/wireless/wl12xx/event.c
+++ b/drivers/net/wireless/wl12xx/event.c
@@ -33,6 +33,7 @@ void wl1271_pspoll_work(struct work_struct *work)
 {
 	struct delayed_work *dwork;
 	struct wl1271 *wl;
+	int ret;
 
 	dwork = container_of(work, struct delayed_work, work);
 	wl = container_of(dwork, struct wl1271, pspoll_work);
@@ -55,8 +56,13 @@ void wl1271_pspoll_work(struct work_struct *work)
 	 * delivery failure occurred, and no-one changed state since, so
 	 * we should go back to powersave.
 	 */
+	ret = wl1271_ps_elp_wakeup(wl);
+	if (ret < 0)
+		goto out;
+
 	wl1271_ps_set_mode(wl, STATION_POWER_SAVE_MODE, wl->basic_rate, true);
 
+	wl1271_ps_elp_sleep(wl);
 out:
 	mutex_unlock(&wl->mutex);
 };
@@ -129,11 +135,6 @@ static int wl1271_event_ps_report(struct wl1271 *wl,
 
 		/* enable beacon early termination */
 		ret = wl1271_acx_bet_enable(wl, true);
-		if (ret < 0)
-			break;
-
-		/* go to extremely low power mode */
-		wl1271_ps_elp_sleep(wl);
 		break;
 	default:
 		break;
diff --git a/drivers/net/wireless/wl12xx/main.c b/drivers/net/wireless/wl12xx/main.c
index 5545c3b94d2..3f6517dda62 100644
--- a/drivers/net/wireless/wl12xx/main.c
+++ b/drivers/net/wireless/wl12xx/main.c
@@ -2792,32 +2792,31 @@ static int wl1271_op_conf_tx(struct ieee80211_hw *hw, u16 queue,
 		conf_tid->ack_policy = CONF_ACK_POLICY_LEGACY;
 		conf_tid->apsd_conf[0] = 0;
 		conf_tid->apsd_conf[1] = 0;
-	} else {
-		ret = wl1271_ps_elp_wakeup(wl);
-		if (ret < 0)
-			goto out;
+		goto out;
+	}
 
-		/*
-		 * the txop is confed in units of 32us by the mac80211,
-		 * we need us
-		 */
-		ret = wl1271_acx_ac_cfg(wl, wl1271_tx_get_queue(queue),
-					params->cw_min, params->cw_max,
-					params->aifs, params->txop << 5);
-		if (ret < 0)
-			goto out_sleep;
+	ret = wl1271_ps_elp_wakeup(wl);
+	if (ret < 0)
+		goto out;
 
-		ret = wl1271_acx_tid_cfg(wl, wl1271_tx_get_queue(queue),
-					 CONF_CHANNEL_TYPE_EDCF,
-					 wl1271_tx_get_queue(queue),
-					 ps_scheme, CONF_ACK_POLICY_LEGACY,
-					 0, 0);
-		if (ret < 0)
-			goto out_sleep;
+	/*
+	 * the txop is confed in units of 32us by the mac80211,
+	 * we need us
+	 */
+	ret = wl1271_acx_ac_cfg(wl, wl1271_tx_get_queue(queue),
+				params->cw_min, params->cw_max,
+				params->aifs, params->txop << 5);
+	if (ret < 0)
+		goto out_sleep;
+
+	ret = wl1271_acx_tid_cfg(wl, wl1271_tx_get_queue(queue),
+				 CONF_CHANNEL_TYPE_EDCF,
+				 wl1271_tx_get_queue(queue),
+				 ps_scheme, CONF_ACK_POLICY_LEGACY,
+				 0, 0);
 
 out_sleep:
-		wl1271_ps_elp_sleep(wl);
-	}
+	wl1271_ps_elp_sleep(wl);
 
 out:
 	mutex_unlock(&wl->mutex);
diff --git a/drivers/net/wireless/wl12xx/ps.c b/drivers/net/wireless/wl12xx/ps.c
index 971f13e792d..b8deada5d02 100644
--- a/drivers/net/wireless/wl12xx/ps.c
+++ b/drivers/net/wireless/wl12xx/ps.c
@@ -149,9 +149,6 @@ int wl1271_ps_set_mode(struct wl1271 *wl, enum wl1271_cmd_ps_mode mode,
 	case STATION_ACTIVE_MODE:
 	default:
 		wl1271_debug(DEBUG_PSM, "leaving psm");
-		ret = wl1271_ps_elp_wakeup(wl);
-		if (ret < 0)
-			return ret;
 
 		/* disable beacon early termination */
 		ret = wl1271_acx_bet_enable(wl, false);
diff --git a/drivers/net/wireless/wl12xx/tx.c b/drivers/net/wireless/wl12xx/tx.c
index db9e47e09fb..2019ed9ebfc 100644
--- a/drivers/net/wireless/wl12xx/tx.c
+++ b/drivers/net/wireless/wl12xx/tx.c
@@ -511,22 +511,14 @@ static void wl1271_skb_queue_head(struct wl1271 *wl, struct sk_buff *skb)
 void wl1271_tx_work_locked(struct wl1271 *wl)
 {
 	struct sk_buff *skb;
-	bool woken_up = false;
 	u32 buf_offset = 0;
 	bool sent_packets = false;
 	int ret;
 
 	if (unlikely(wl->state == WL1271_STATE_OFF))
-		goto out;
+		return;
 
 	while ((skb = wl1271_skb_dequeue(wl))) {
-		if (!woken_up) {
-			ret = wl1271_ps_elp_wakeup(wl);
-			if (ret < 0)
-				goto out_ack;
-			woken_up = true;
-		}
-
 		ret = wl1271_prepare_tx_frame(wl, skb, buf_offset);
 		if (ret == -EAGAIN) {
 			/*
@@ -573,18 +565,22 @@ out_ack:
 
 		wl1271_handle_tx_low_watermark(wl);
 	}
-
-out:
-	if (woken_up)
-		wl1271_ps_elp_sleep(wl);
 }
 
 void wl1271_tx_work(struct work_struct *work)
 {
 	struct wl1271 *wl = container_of(work, struct wl1271, tx_work);
+	int ret;
 
 	mutex_lock(&wl->mutex);
+	ret = wl1271_ps_elp_wakeup(wl);
+	if (ret < 0)
+		goto out;
+
 	wl1271_tx_work_locked(wl);
+
+	wl1271_ps_elp_wakeup(wl);
+out:
 	mutex_unlock(&wl->mutex);
 }
 
-- 
cgit v1.2.3-70-g09d2


From 13026decf7b74d0908df034dc6dc86c2caaec939 Mon Sep 17 00:00:00 2001
From: Juuso Oikarinen <juuso.oikarinen@nokia.com>
Date: Tue, 29 Mar 2011 16:43:50 +0300
Subject: wl12xx: Handle duplicate calling of remove interface

Because of the hardware recovery mechanism, its possible the
__wl1271_op_remove_interface is called twice. Currently, this leads to a
kernel crash even before a kernel WARNing can be issued.

Fix this.

Signed-off-by: Juuso Oikarinen <juuso.oikarinen@nokia.com>
Signed-off-by: Luciano Coelho <coelho@ti.com>
---
 drivers/net/wireless/wl12xx/main.c   | 29 ++++++++++++++++++++++++++---
 drivers/net/wireless/wl12xx/wl12xx.h |  3 ++-
 2 files changed, 28 insertions(+), 4 deletions(-)

(limited to 'drivers/net/wireless/wl12xx')

diff --git a/drivers/net/wireless/wl12xx/main.c b/drivers/net/wireless/wl12xx/main.c
index 3f6517dda62..57d0af6cfa6 100644
--- a/drivers/net/wireless/wl12xx/main.c
+++ b/drivers/net/wireless/wl12xx/main.c
@@ -1304,6 +1304,16 @@ static int wl1271_op_add_interface(struct ieee80211_hw *hw,
 		goto out;
 	}
 
+	/*
+	 * in some very corner case HW recovery scenarios its possible to
+	 * get here before __wl1271_op_remove_interface is complete, so
+	 * opt out if that is the case.
+	 */
+	if (test_bit(WL1271_FLAG_IF_INITIALIZED, &wl->flags)) {
+		ret = -EBUSY;
+		goto out;
+	}
+
 	switch (vif->type) {
 	case NL80211_IFTYPE_STATION:
 		wl->bss_type = BSS_TYPE_STA_BSS;
@@ -1372,6 +1382,7 @@ power_off:
 
 	wl->vif = vif;
 	wl->state = WL1271_STATE_ON;
+	set_bit(WL1271_FLAG_IF_INITIALIZED, &wl->flags);
 	wl1271_info("firmware booted (%s)", wl->chip.fw_ver_str);
 
 	/* update hw/fw version info in wiphy struct */
@@ -1409,14 +1420,16 @@ static void __wl1271_op_remove_interface(struct wl1271 *wl)
 
 	wl1271_debug(DEBUG_MAC80211, "mac80211 remove interface");
 
+	/* because of hardware recovery, we may get here twice */
+	if (wl->state != WL1271_STATE_ON)
+		return;
+
 	wl1271_info("down");
 
 	mutex_lock(&wl_list_mutex);
 	list_del(&wl->list);
 	mutex_unlock(&wl_list_mutex);
 
-	WARN_ON(wl->state != WL1271_STATE_ON);
-
 	/* enable dyn ps just in case (if left on due to fw crash etc) */
 	if (wl->bss_type == BSS_TYPE_STA_BSS)
 		ieee80211_enable_dyn_ps(wl->vif);
@@ -1428,6 +1441,10 @@ static void __wl1271_op_remove_interface(struct wl1271 *wl)
 		ieee80211_scan_completed(wl->hw, true);
 	}
 
+	/*
+	 * this must be before the cancel_work calls below, so that the work
+	 * functions don't perform further work.
+	 */
 	wl->state = WL1271_STATE_OFF;
 
 	mutex_unlock(&wl->mutex);
@@ -1464,7 +1481,6 @@ static void __wl1271_op_remove_interface(struct wl1271 *wl)
 	wl->time_offset = 0;
 	wl->session_counter = 0;
 	wl->rate_set = CONF_TX_RATE_MASK_BASIC;
-	wl->flags = 0;
 	wl->vif = NULL;
 	wl->filters = 0;
 	wl1271_free_ap_keys(wl);
@@ -1473,6 +1489,13 @@ static void __wl1271_op_remove_interface(struct wl1271 *wl)
 	wl->ap_ps_map = 0;
 	wl->block_size = 0;
 
+	/*
+	 * this is performed after the cancel_work calls and the associated
+	 * mutex_lock, so that wl1271_op_add_interface does not accidentally
+	 * get executed before all these vars have been reset.
+	 */
+	wl->flags = 0;
+
 	for (i = 0; i < NUM_TX_QUEUES; i++)
 		wl->tx_blocks_freed[i] = 0;
 
diff --git a/drivers/net/wireless/wl12xx/wl12xx.h b/drivers/net/wireless/wl12xx/wl12xx.h
index ba98e185384..c1294595884 100644
--- a/drivers/net/wireless/wl12xx/wl12xx.h
+++ b/drivers/net/wireless/wl12xx/wl12xx.h
@@ -354,7 +354,8 @@ enum wl12xx_flags {
 	WL1271_FLAG_PSPOLL_FAILURE,
 	WL1271_FLAG_STA_STATE_SENT,
 	WL1271_FLAG_FW_TX_BUSY,
-	WL1271_FLAG_AP_STARTED
+	WL1271_FLAG_AP_STARTED,
+	WL1271_FLAG_IF_INITIALIZED,
 };
 
 struct wl1271_link {
-- 
cgit v1.2.3-70-g09d2


From c5745187a4812f2991a58e469a866582a7326d91 Mon Sep 17 00:00:00 2001
From: Ohad Ben-Cohen <ohad@wizery.com>
Date: Wed, 30 Mar 2011 16:35:59 +0200
Subject: wl12xx: fix roaming

The wl12xx device normally drops all frames coming from BSSID
it is not joined with.

This behavior is configured today by the wl12xx driver in response
to a handful of ieee80211_bss_change and ieee80211_conf_changed
notification flags, such as BSS_CHANGED_ASSOC, BSS_CHANGED_BSSID,
IEEE80211_CONF_CHANGE_IDLE, etc..

This breaks when we roam to a new BSSID, where authentication frames
are sent before any BSS_CHANGED/CONF_CHANGED flags are received.
When this happens the hardware silently drops the authentication
responses, and the roaming fails.

Ideally this aggressive filtering behavior of the device should be disabled
upon a notification from mac80211. Such notification will take place
after multi-channel support will be added: mac80211 will likely send a
remain-on-channel notification to drivers when entering sensitive
states (like authentication), otherwise the firmware might jump to
different channels (to serve a different role).

Until those notifications materialize, disable the hw BSSID filter
when authentication requests are sent, so roaming would work.

Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com>
Reviewed-by: Luciano Coelho <coelho@ti.com>
Signed-off-by: Luciano Coelho <coelho@ti.com>
---
 drivers/net/wireless/wl12xx/io.h   |  1 +
 drivers/net/wireless/wl12xx/main.c |  4 ++--
 drivers/net/wireless/wl12xx/tx.c   | 24 ++++++++++++++++++++++++
 3 files changed, 27 insertions(+), 2 deletions(-)

(limited to 'drivers/net/wireless/wl12xx')

diff --git a/drivers/net/wireless/wl12xx/io.h b/drivers/net/wireless/wl12xx/io.h
index e6199eb5193..36e185583ec 100644
--- a/drivers/net/wireless/wl12xx/io.h
+++ b/drivers/net/wireless/wl12xx/io.h
@@ -171,5 +171,6 @@ int wl1271_free_hw(struct wl1271 *wl);
 irqreturn_t wl1271_irq(int irq, void *data);
 bool wl1271_set_block_size(struct wl1271 *wl);
 int wl1271_tx_dummy_packet(struct wl1271 *wl);
+void wl1271_configure_filters(struct wl1271 *wl, unsigned int filters);
 
 #endif
diff --git a/drivers/net/wireless/wl12xx/main.c b/drivers/net/wireless/wl12xx/main.c
index 57d0af6cfa6..0efa7a05510 100644
--- a/drivers/net/wireless/wl12xx/main.c
+++ b/drivers/net/wireless/wl12xx/main.c
@@ -1528,7 +1528,7 @@ static void wl1271_op_remove_interface(struct ieee80211_hw *hw,
 	cancel_work_sync(&wl->recovery_work);
 }
 
-static void wl1271_configure_filters(struct wl1271 *wl, unsigned int filters)
+void wl1271_configure_filters(struct wl1271 *wl, unsigned int filters)
 {
 	wl1271_set_default_filters(wl);
 
@@ -1650,7 +1650,7 @@ static int wl1271_unjoin(struct wl1271 *wl)
 	clear_bit(WL1271_FLAG_JOINED, &wl->flags);
 	memset(wl->bssid, 0, ETH_ALEN);
 
-	/* stop filterting packets based on bssid */
+	/* stop filtering packets based on bssid */
 	wl1271_configure_filters(wl, FIF_OTHER_BSS);
 
 out:
diff --git a/drivers/net/wireless/wl12xx/tx.c b/drivers/net/wireless/wl12xx/tx.c
index 2019ed9ebfc..7686bc1ff16 100644
--- a/drivers/net/wireless/wl12xx/tx.c
+++ b/drivers/net/wireless/wl12xx/tx.c
@@ -70,6 +70,28 @@ static void wl1271_free_tx_id(struct wl1271 *wl, int id)
 	}
 }
 
+static int wl1271_tx_update_filters(struct wl1271 *wl,
+						 struct sk_buff *skb)
+{
+	struct ieee80211_hdr *hdr;
+
+	hdr = (struct ieee80211_hdr *)(skb->data +
+				       sizeof(struct wl1271_tx_hw_descr));
+
+	/*
+	 * stop bssid-based filtering before transmitting authentication
+	 * requests. this way the hw will never drop authentication
+	 * responses coming from BSSIDs it isn't familiar with (e.g. on
+	 * roaming)
+	 */
+	if (!ieee80211_is_auth(hdr->frame_control))
+		return 0;
+
+	wl1271_configure_filters(wl, FIF_OTHER_BSS);
+
+	return wl1271_acx_rx_config(wl, wl->rx_config, wl->rx_filter);
+}
+
 static void wl1271_tx_ap_update_inconnection_sta(struct wl1271 *wl,
 						 struct sk_buff *skb)
 {
@@ -350,6 +372,8 @@ static int wl1271_prepare_tx_frame(struct wl1271 *wl, struct sk_buff *skb,
 	if (wl->bss_type == BSS_TYPE_AP_BSS) {
 		wl1271_tx_ap_update_inconnection_sta(wl, skb);
 		wl1271_tx_regulate_link(wl, hlid);
+	} else {
+		wl1271_tx_update_filters(wl, skb);
 	}
 
 	wl1271_tx_fill_hdr(wl, skb, extra, info, hlid);
-- 
cgit v1.2.3-70-g09d2


From 8bf69aae4cb9b196ba5ac386f83a1ca3865af11f Mon Sep 17 00:00:00 2001
From: Ohad Ben-Cohen <ohad@wizery.com>
Date: Wed, 30 Mar 2011 19:18:31 +0200
Subject: wl12xx: fix "JOIN while associated" commentary

Issuing multiple JOIN commands to the wl12xx's firmware, while
we're associated, might have undesired implications, so the driver
prints a message when that happens, and warn developers who check
out the source.

Update the commentary in order to consider the one valid scenario
where this can happen: roaming.

Cautiously keep the message for now, until we either gain confidence
there are no unintentional JOIN-while-associated events, or until
we move to the new multi-role fw who solves this multiple-join issue
for good.

Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com>
Signed-off-by: Luciano Coelho <coelho@ti.com>
---
 drivers/net/wireless/wl12xx/main.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

(limited to 'drivers/net/wireless/wl12xx')

diff --git a/drivers/net/wireless/wl12xx/main.c b/drivers/net/wireless/wl12xx/main.c
index 0efa7a05510..01205ea5e7e 100644
--- a/drivers/net/wireless/wl12xx/main.c
+++ b/drivers/net/wireless/wl12xx/main.c
@@ -1591,10 +1591,10 @@ static int wl1271_join(struct wl1271 *wl, bool set_assoc)
 	 * One of the side effects of the JOIN command is that is clears
 	 * WPA/WPA2 keys from the chipset. Performing a JOIN while associated
 	 * to a WPA/WPA2 access point will therefore kill the data-path.
-	 * Currently there is no supported scenario for JOIN during
-	 * association - if it becomes a supported scenario, the WPA/WPA2 keys
-	 * must be handled somehow.
-	 *
+	 * Currently the only valid scenario for JOIN during association
+	 * is on roaming, in which case we will also be given new keys.
+	 * Keep the below message for now, unless it starts bothering
+	 * users who really like to roam a lot :)
 	 */
 	if (test_bit(WL1271_FLAG_STA_ASSOCIATED, &wl->flags))
 		wl1271_info("JOIN while associated.");
-- 
cgit v1.2.3-70-g09d2


From d29633b40e6afc6b4276a4e381bc532cc84be104 Mon Sep 17 00:00:00 2001
From: Ido Yariv <ido@wizery.com>
Date: Thu, 31 Mar 2011 10:06:57 +0200
Subject: wl12xx: Clean up and fix the 128x boot sequence

Clean up the boot sequence code & fix the following issues:
1. Always read the registers' values and set the relevant bits instead of
   zeroing all other bits
2. Handle cases where wl1271_top_reg_read returns an error
3. Verify that the HW can detect the selected clock source
4. Remove 128x PG10 initialization code
5. Configure the MCS PLL to work in HP mode

Signed-off-by: Ido Yariv <ido@wizery.com>
Reviewed-by: Luciano Coelho <coelho@ti.com>
Signed-off-by: Luciano Coelho <coelho@ti.com>
---
 drivers/net/wireless/wl12xx/boot.c | 235 ++++++++++++++++++-------------------
 drivers/net/wireless/wl12xx/boot.h |   1 +
 include/linux/wl12xx.h             |  10 +-
 3 files changed, 123 insertions(+), 123 deletions(-)

(limited to 'drivers/net/wireless/wl12xx')

diff --git a/drivers/net/wireless/wl12xx/boot.c b/drivers/net/wireless/wl12xx/boot.c
index 34bf2fe47dc..b5ec2c2b6f7 100644
--- a/drivers/net/wireless/wl12xx/boot.c
+++ b/drivers/net/wireless/wl12xx/boot.c
@@ -523,137 +523,137 @@ static void wl1271_boot_hw_version(struct wl1271 *wl)
 		wl->quirks |= WL12XX_QUIRK_END_OF_TRANSACTION;
 }
 
-/*
- * WL128x has two clocks input - TCXO and FREF.
- * TCXO is the main clock of the device, while FREF is used to sync
- * between the GPS and the cellular modem.
- * In cases where TCXO is 32.736MHz or 16.368MHz, the FREF will be used
- * as the WLAN/BT main clock.
- */
-static int wl128x_switch_fref(struct wl1271 *wl, bool *is_ref_clk)
+static int wl128x_switch_tcxo_to_fref(struct wl1271 *wl)
 {
-	u16 sys_clk_cfg_val;
+	u16 spare_reg;
 
-	/* if working on XTAL-only mode go directly to TCXO TO FREF SWITCH */
-	if ((wl->ref_clock == CONF_REF_CLK_38_4_M_XTAL) ||
-	    (wl->ref_clock == CONF_REF_CLK_26_M_XTAL))
-		return true;
+	/* Mask bits [2] & [8:4] in the sys_clk_cfg register */
+	spare_reg = wl1271_top_reg_read(wl, WL_SPARE_REG);
+	if (spare_reg == 0xFFFF)
+		return -EFAULT;
+	spare_reg |= (BIT(3) | BIT(5) | BIT(6));
+	wl1271_top_reg_write(wl, WL_SPARE_REG, spare_reg);
 
-	/* Read clock source FREF or TCXO */
-	sys_clk_cfg_val = wl1271_top_reg_read(wl, SYS_CLK_CFG_REG);
+	/* Enable FREF_CLK_REQ & mux MCS and coex PLLs to FREF */
+	wl1271_top_reg_write(wl, SYS_CLK_CFG_REG,
+			     WL_CLK_REQ_TYPE_PG2 | MCS_PLL_CLK_SEL_FREF);
 
-	if (sys_clk_cfg_val & PRCM_CM_EN_MUX_WLAN_FREF) {
-		/* if bit 3 is set - working with FREF clock */
-		wl1271_debug(DEBUG_BOOT, "working with FREF clock, skip"
-			     " to FREF");
+	/* Delay execution for 15msec, to let the HW settle */
+	mdelay(15);
 
-		*is_ref_clk = true;
-	} else {
-		/* if bit 3 is clear - working with TCXO clock */
-		wl1271_debug(DEBUG_BOOT, "working with TCXO clock");
-
-		/* TCXO to FREF switch, check TXCO clock config */
-		if ((wl->tcxo_clock != WL12XX_TCXOCLOCK_16_368) &&
-		    (wl->tcxo_clock != WL12XX_TCXOCLOCK_32_736)) {
-			/*
-			 * not 16.368Mhz and not 32.736Mhz - skip to
-			 * configure ELP stage
-			 */
-			wl1271_debug(DEBUG_BOOT, "NEW PLL ALGO:"
-				     " TcxoRefClk=%d - not 16.368Mhz and not"
-				     " 32.736Mhz - skip to configure ELP"
-				     " stage", wl->tcxo_clock);
-
-			*is_ref_clk = false;
-		} else {
-			wl1271_debug(DEBUG_BOOT, "NEW PLL ALGO:"
-				     "TcxoRefClk=%d - 16.368Mhz or 32.736Mhz"
-				     " - TCXO to FREF switch",
-				     wl->tcxo_clock);
+	return 0;
+}
 
-			return true;
-		}
-	}
+static bool wl128x_is_tcxo_valid(struct wl1271 *wl)
+{
+	u16 tcxo_detection;
+
+	tcxo_detection = wl1271_top_reg_read(wl, TCXO_CLK_DETECT_REG);
+	if (tcxo_detection & TCXO_DET_FAILED)
+		return false;
 
-	return false;
+	return true;
 }
 
-static int wl128x_boot_clk(struct wl1271 *wl, bool *is_ref_clk)
+static bool wl128x_is_fref_valid(struct wl1271 *wl)
 {
-	if (wl128x_switch_fref(wl, is_ref_clk)) {
-		wl1271_debug(DEBUG_BOOT, "XTAL-only mode go directly to"
-					 " TCXO TO FREF SWITCH");
-		/* TCXO to FREF switch - for PG2.0 */
-		wl1271_top_reg_write(wl, WL_SPARE_REG,
-				     WL_SPARE_MASK_8526);
-
-		wl1271_top_reg_write(wl, SYS_CLK_CFG_REG,
-			WL_CLK_REQ_TYPE_PG2 | MCS_PLL_CLK_SEL_FREF);
-
-		*is_ref_clk = true;
-		mdelay(15);
-	}
+	u16 fref_detection;
 
-	/* Set bit 2 in spare register to avoid illegal access */
-	wl1271_top_reg_write(wl, WL_SPARE_REG, WL_SPARE_VAL);
+	fref_detection = wl1271_top_reg_read(wl, FREF_CLK_DETECT_REG);
+	if (fref_detection & FREF_CLK_DETECT_FAIL)
+		return false;
 
-	/* working with TCXO clock */
-	if ((*is_ref_clk == false) &&
-	    ((wl->tcxo_clock == WL12XX_TCXOCLOCK_16_8) ||
-	     (wl->tcxo_clock == WL12XX_TCXOCLOCK_33_6))) {
-		wl1271_debug(DEBUG_BOOT, "16_8_M or 33_6_M TCXO detected");
+	return true;
+}
 
-		/* Manually Configure MCS PLL settings PG2.0 Only */
-		wl1271_top_reg_write(wl, MCS_PLL_M_REG, MCS_PLL_M_REG_VAL);
-		wl1271_top_reg_write(wl, MCS_PLL_N_REG, MCS_PLL_N_REG_VAL);
-		wl1271_top_reg_write(wl, MCS_PLL_CONFIG_REG,
-				     MCS_PLL_CONFIG_REG_VAL);
-	} else {
-		int pll_config;
-		u16 mcs_pll_config_val;
+static int wl128x_manually_configure_mcs_pll(struct wl1271 *wl)
+{
+	wl1271_top_reg_write(wl, MCS_PLL_M_REG, MCS_PLL_M_REG_VAL);
+	wl1271_top_reg_write(wl, MCS_PLL_N_REG, MCS_PLL_N_REG_VAL);
+	wl1271_top_reg_write(wl, MCS_PLL_CONFIG_REG, MCS_PLL_CONFIG_REG_VAL);
 
-		/*
-		 * Configure MCS PLL settings to FREF Freq
-		 * Set the values that determine the time elapse since the PLL's
-		 * get their enable signal until the lock indication is set
-		 */
-		wl1271_top_reg_write(wl, PLL_LOCK_COUNTERS_REG,
-			PLL_LOCK_COUNTERS_COEX | PLL_LOCK_COUNTERS_MCS);
+	return 0;
+}
 
-		mcs_pll_config_val = wl1271_top_reg_read(wl,
-						 MCS_PLL_CONFIG_REG);
-		/*
-		 * Set the MCS PLL input frequency value according to the
-		 * reference clock value detected/read
-		 */
-		if (*is_ref_clk == false) {
-			if ((wl->tcxo_clock == WL12XX_TCXOCLOCK_19_2) ||
-			    (wl->tcxo_clock == WL12XX_TCXOCLOCK_38_4))
-				pll_config = 1;
-			else if ((wl->tcxo_clock == WL12XX_TCXOCLOCK_26)
-				 ||
-				 (wl->tcxo_clock == WL12XX_TCXOCLOCK_52))
-				pll_config = 2;
-			else
-				return -EINVAL;
-		} else {
-			if ((wl->ref_clock == CONF_REF_CLK_19_2_E) ||
-			    (wl->ref_clock == CONF_REF_CLK_38_4_E))
-				pll_config = 1;
-			else if ((wl->ref_clock == CONF_REF_CLK_26_E) ||
-				 (wl->ref_clock == CONF_REF_CLK_52_E))
-				pll_config = 2;
-			else
-				return -EINVAL;
-		}
+static int wl128x_configure_mcs_pll(struct wl1271 *wl, int clk)
+{
+	u16 spare_reg;
+	u16 pll_config;
+	u8 input_freq;
+
+	/* Mask bits [3:1] in the sys_clk_cfg register */
+	spare_reg = wl1271_top_reg_read(wl, WL_SPARE_REG);
+	if (spare_reg == 0xFFFF)
+		return -EFAULT;
+	spare_reg |= BIT(2);
+	wl1271_top_reg_write(wl, WL_SPARE_REG, spare_reg);
+
+	/* Handle special cases of the TCXO clock */
+	if (wl->tcxo_clock == WL12XX_TCXOCLOCK_16_8 ||
+	    wl->tcxo_clock == WL12XX_TCXOCLOCK_33_6)
+		return wl128x_manually_configure_mcs_pll(wl);
+
+	/* Set the input frequency according to the selected clock source */
+	input_freq = (clk & 1) + 1;
+
+	pll_config = wl1271_top_reg_read(wl, MCS_PLL_CONFIG_REG);
+	if (pll_config == 0xFFFF)
+		return -EFAULT;
+	pll_config |= (input_freq << MCS_SEL_IN_FREQ_SHIFT);
+	pll_config |= MCS_PLL_ENABLE_HP;
+	wl1271_top_reg_write(wl, MCS_PLL_CONFIG_REG, pll_config);
 
-		mcs_pll_config_val |= (pll_config << (MCS_SEL_IN_FREQ_SHIFT)) &
-				      (MCS_SEL_IN_FREQ_MASK);
-		wl1271_top_reg_write(wl, MCS_PLL_CONFIG_REG,
-				     mcs_pll_config_val);
+	return 0;
+}
+
+/*
+ * WL128x has two clocks input - TCXO and FREF.
+ * TCXO is the main clock of the device, while FREF is used to sync
+ * between the GPS and the cellular modem.
+ * In cases where TCXO is 32.736MHz or 16.368MHz, the FREF will be used
+ * as the WLAN/BT main clock.
+ */
+static int wl128x_boot_clk(struct wl1271 *wl, int *selected_clock)
+{
+	u16 sys_clk_cfg;
+
+	/* For XTAL-only modes, FREF will be used after switching from TCXO */
+	if (wl->ref_clock == WL12XX_REFCLOCK_26_XTAL ||
+	    wl->ref_clock == WL12XX_REFCLOCK_38_XTAL) {
+		if (!wl128x_switch_tcxo_to_fref(wl))
+			return -EINVAL;
+		goto fref_clk;
 	}
 
-	return 0;
+	/* Query the HW, to determine which clock source we should use */
+	sys_clk_cfg = wl1271_top_reg_read(wl, SYS_CLK_CFG_REG);
+	if (sys_clk_cfg == 0xFFFF)
+		return -EINVAL;
+	if (sys_clk_cfg & PRCM_CM_EN_MUX_WLAN_FREF)
+		goto fref_clk;
+
+	/* If TCXO is either 32.736MHz or 16.368MHz, switch to FREF */
+	if (wl->tcxo_clock == WL12XX_TCXOCLOCK_16_368 ||
+	    wl->tcxo_clock == WL12XX_TCXOCLOCK_32_736) {
+		if (!wl128x_switch_tcxo_to_fref(wl))
+			return -EINVAL;
+		goto fref_clk;
+	}
+
+	/* TCXO clock is selected */
+	if (!wl128x_is_tcxo_valid(wl))
+		return -EINVAL;
+	*selected_clock = wl->tcxo_clock;
+	goto config_mcs_pll;
+
+fref_clk:
+	/* FREF clock is selected */
+	if (!wl128x_is_fref_valid(wl))
+		return -EINVAL;
+	*selected_clock = wl->ref_clock;
+
+config_mcs_pll:
+	return wl128x_configure_mcs_pll(wl, *selected_clock);
 }
 
 static int wl127x_boot_clk(struct wl1271 *wl)
@@ -713,10 +713,10 @@ int wl1271_load_firmware(struct wl1271 *wl)
 {
 	int ret = 0;
 	u32 tmp, clk;
-	bool is_ref_clk = false;
+	int selected_clock = -1;
 
 	if (wl->chip.id == CHIP_ID_1283_PG20) {
-		ret = wl128x_boot_clk(wl, &is_ref_clk);
+		ret = wl128x_boot_clk(wl, &selected_clock);
 		if (ret < 0)
 			goto out;
 	} else {
@@ -741,10 +741,7 @@ int wl1271_load_firmware(struct wl1271 *wl)
 	wl1271_debug(DEBUG_BOOT, "clk2 0x%x", clk);
 
 	if (wl->chip.id == CHIP_ID_1283_PG20) {
-		if (is_ref_clk == false)
-			clk |= ((wl->tcxo_clock & 0x3) << 1) << 4;
-		else
-			clk |= ((wl->ref_clock & 0x3) << 1) << 4;
+		clk |= ((selected_clock & 0x3) << 1) << 4;
 	} else {
 		clk |= (wl->ref_clock << 1) << 4;
 	}
diff --git a/drivers/net/wireless/wl12xx/boot.h b/drivers/net/wireless/wl12xx/boot.h
index 1f5ee31dc0b..d9de64ac144 100644
--- a/drivers/net/wireless/wl12xx/boot.h
+++ b/drivers/net/wireless/wl12xx/boot.h
@@ -107,6 +107,7 @@ struct wl1271_static_data {
 #define MCS_SEL_IN_FREQ_MASK         0x0070
 #define MCS_SEL_IN_FREQ_SHIFT        4
 #define MCS_PLL_CONFIG_REG_VAL       0x73
+#define MCS_PLL_ENABLE_HP            (BIT(0) | BIT(1))
 
 #define MCS_PLL_M_REG                0xD94
 #define MCS_PLL_N_REG                0xD96
diff --git a/include/linux/wl12xx.h b/include/linux/wl12xx.h
index eb8aacab8d4..c1a743ea747 100644
--- a/include/linux/wl12xx.h
+++ b/include/linux/wl12xx.h
@@ -26,10 +26,12 @@
 
 /* Reference clock values */
 enum {
-	WL12XX_REFCLOCK_19 = 0,	/* 19.2 MHz */
-	WL12XX_REFCLOCK_26 = 1,	/* 26 MHz */
-	WL12XX_REFCLOCK_38 = 2,	/* 38.4 MHz */
-	WL12XX_REFCLOCK_54 = 3,	/* 54 MHz */
+	WL12XX_REFCLOCK_19	= 0, /* 19.2 MHz */
+	WL12XX_REFCLOCK_26	= 1, /* 26 MHz */
+	WL12XX_REFCLOCK_38	= 2, /* 38.4 MHz */
+	WL12XX_REFCLOCK_52	= 3, /* 52 MHz */
+	WL12XX_REFCLOCK_38_XTAL = 4, /* 38.4 MHz, XTAL */
+	WL12XX_REFCLOCK_26_XTAL = 5, /* 26 MHz, XTAL */
 };
 
 /* TCXO clock values */
-- 
cgit v1.2.3-70-g09d2


From 0da13da767cd568c1fe2a7b5b936e86e521b5ae7 Mon Sep 17 00:00:00 2001
From: Ido Yariv <ido@wizery.com>
Date: Thu, 31 Mar 2011 10:06:58 +0200
Subject: wl12xx: Clean up the block size alignment code

Simplify and clean up the block size alignment code:
1. Set the block size according to the padding field type, as it cannot
   exceed the maximum value this field can hold.
2. Move the alignment code into a function instead of duplicating it in
   multiple places.
3. In the current implementation, the block_size member can be
   misleading because a zero value actually means that there's no need to
   align. Declare a block size alignment quirk instead.

Signed-off-by: Ido Yariv <ido@wizery.com>
Signed-off-by: Luciano Coelho <coelho@ti.com>
---
 drivers/net/wireless/wl12xx/init.c   |  2 +-
 drivers/net/wireless/wl12xx/io.c     |  3 ++-
 drivers/net/wireless/wl12xx/main.c   |  4 ++--
 drivers/net/wireless/wl12xx/sdio.c   | 12 ++----------
 drivers/net/wireless/wl12xx/tx.c     | 26 ++++++++++++++------------
 drivers/net/wireless/wl12xx/tx.h     |  9 +++++++++
 drivers/net/wireless/wl12xx/wl12xx.h | 10 ++++++----
 7 files changed, 36 insertions(+), 30 deletions(-)

(limited to 'drivers/net/wireless/wl12xx')

diff --git a/drivers/net/wireless/wl12xx/init.c b/drivers/net/wireless/wl12xx/init.c
index 2dbc08331ca..cf466074237 100644
--- a/drivers/net/wireless/wl12xx/init.c
+++ b/drivers/net/wireless/wl12xx/init.c
@@ -514,7 +514,7 @@ int wl1271_chip_specific_init(struct wl1271 *wl)
 	if (wl->chip.id == CHIP_ID_1283_PG20) {
 		u32 host_cfg_bitmap = HOST_IF_CFG_RX_FIFO_ENABLE;
 
-		if (wl1271_set_block_size(wl))
+		if (wl->quirks & WL12XX_QUIRK_BLOCKSIZE_ALIGNMENT)
 			/* Enable SDIO padding */
 			host_cfg_bitmap |= HOST_IF_CFG_TX_PAD_TO_SDIO_BLK;
 
diff --git a/drivers/net/wireless/wl12xx/io.c b/drivers/net/wireless/wl12xx/io.c
index aa40c98e8fd..da5c1ad942a 100644
--- a/drivers/net/wireless/wl12xx/io.c
+++ b/drivers/net/wireless/wl12xx/io.c
@@ -29,6 +29,7 @@
 #include "wl12xx.h"
 #include "wl12xx_80211.h"
 #include "io.h"
+#include "tx.h"
 
 #define OCP_CMD_LOOP  32
 
@@ -46,7 +47,7 @@
 bool wl1271_set_block_size(struct wl1271 *wl)
 {
 	if (wl->if_ops->set_block_size) {
-		wl->if_ops->set_block_size(wl);
+		wl->if_ops->set_block_size(wl, WL12XX_BUS_BLOCK_SIZE);
 		return true;
 	}
 
diff --git a/drivers/net/wireless/wl12xx/main.c b/drivers/net/wireless/wl12xx/main.c
index 01205ea5e7e..1cd396306e7 100644
--- a/drivers/net/wireless/wl12xx/main.c
+++ b/drivers/net/wireless/wl12xx/main.c
@@ -1017,6 +1017,8 @@ static int wl1271_chip_wakeup(struct wl1271 *wl)
 		ret = wl1271_setup(wl);
 		if (ret < 0)
 			goto out;
+		if (wl1271_set_block_size(wl))
+			wl->quirks |= WL12XX_QUIRK_BLOCKSIZE_ALIGNMENT;
 		break;
 	case CHIP_ID_1283_PG10:
 	default:
@@ -1487,7 +1489,6 @@ static void __wl1271_op_remove_interface(struct wl1271 *wl)
 	memset(wl->ap_hlid_map, 0, sizeof(wl->ap_hlid_map));
 	wl->ap_fw_ps_map = 0;
 	wl->ap_ps_map = 0;
-	wl->block_size = 0;
 
 	/*
 	 * this is performed after the cancel_work calls and the associated
@@ -3632,7 +3633,6 @@ struct ieee80211_hw *wl1271_alloc_hw(void)
 	wl->ap_ps_map = 0;
 	wl->ap_fw_ps_map = 0;
 	wl->quirks = 0;
-	wl->block_size = 0;
 
 	memset(wl->tx_frames_map, 0, sizeof(wl->tx_frames_map));
 	for (i = 0; i < ACX_TX_DESCRIPTORS; i++)
diff --git a/drivers/net/wireless/wl12xx/sdio.c b/drivers/net/wireless/wl12xx/sdio.c
index 2ade222f7cb..8246e9de430 100644
--- a/drivers/net/wireless/wl12xx/sdio.c
+++ b/drivers/net/wireless/wl12xx/sdio.c
@@ -51,15 +51,10 @@ static const struct sdio_device_id wl1271_devices[] = {
 };
 MODULE_DEVICE_TABLE(sdio, wl1271_devices);
 
-/* The max SDIO block size is 256 when working with tx padding to SDIO block */
-#define TX_PAD_SDIO_BLK_SIZE                  256
-
-static void wl1271_sdio_set_block_size(struct wl1271 *wl)
+static void wl1271_sdio_set_block_size(struct wl1271 *wl, unsigned int blksz)
 {
-	wl->block_size = TX_PAD_SDIO_BLK_SIZE;
-
 	sdio_claim_host(wl->if_priv);
-	sdio_set_block_size(wl->if_priv, TX_PAD_SDIO_BLK_SIZE);
+	sdio_set_block_size(wl->if_priv, blksz);
 	sdio_release_host(wl->if_priv);
 }
 
@@ -178,9 +173,6 @@ static int wl1271_sdio_power_on(struct wl1271 *wl)
 	sdio_claim_host(func);
 	sdio_enable_func(func);
 
-	/* Set the default block size in case it was modified */
-	sdio_set_block_size(func, 0);
-
 out:
 	return ret;
 }
diff --git a/drivers/net/wireless/wl12xx/tx.c b/drivers/net/wireless/wl12xx/tx.c
index 7686bc1ff16..ba69ba7051f 100644
--- a/drivers/net/wireless/wl12xx/tx.c
+++ b/drivers/net/wireless/wl12xx/tx.c
@@ -149,6 +149,15 @@ u8 wl1271_tx_get_hlid(struct sk_buff *skb)
 	}
 }
 
+static unsigned int wl12xx_calc_packet_alignment(struct wl1271 *wl,
+						unsigned int packet_length)
+{
+	if (wl->quirks & WL12XX_QUIRK_BLOCKSIZE_ALIGNMENT)
+		return ALIGN(packet_length, WL12XX_BUS_BLOCK_SIZE);
+	else
+		return ALIGN(packet_length, WL1271_TX_ALIGN_TO);
+}
+
 static int wl1271_tx_allocate(struct wl1271 *wl, struct sk_buff *skb, u32 extra,
 				u32 buf_offset, u8 hlid)
 {
@@ -174,10 +183,7 @@ static int wl1271_tx_allocate(struct wl1271 *wl, struct sk_buff *skb, u32 extra,
 
 	/* approximate the number of blocks required for this packet
 	   in the firmware */
-	if (wl->block_size)
-		len = ALIGN(total_len, wl->block_size);
-	else
-		len = total_len;
+	len = wl12xx_calc_packet_alignment(wl, total_len);
 
 	total_blocks = (len + TX_HW_BLOCK_SIZE - 1) / TX_HW_BLOCK_SIZE +
 		spare_blocks;
@@ -291,9 +297,9 @@ static void wl1271_tx_fill_hdr(struct wl1271 *wl, struct sk_buff *skb,
 	tx_attr |= rate_idx << TX_HW_ATTR_OFST_RATE_POLICY;
 	desc->reserved = 0;
 
-	if (wl->block_size) {
-		aligned_len = ALIGN(skb->len, wl->block_size);
+	aligned_len = wl12xx_calc_packet_alignment(wl, skb->len);
 
+	if (wl->chip.id == CHIP_ID_1283_PG20) {
 		desc->wl128x_mem.extra_bytes = aligned_len - skb->len;
 		desc->length = cpu_to_le16(aligned_len >> 2);
 
@@ -306,8 +312,7 @@ static void wl1271_tx_fill_hdr(struct wl1271 *wl, struct sk_buff *skb,
 	} else {
 		int pad;
 
-		/* align the length (and store in terms of words) */
-		aligned_len = ALIGN(skb->len, WL1271_TX_ALIGN_TO);
+		/* Store the aligned length in terms of words */
 		desc->length = cpu_to_le16(aligned_len >> 2);
 
 		/* calculate number of padding bytes */
@@ -386,10 +391,7 @@ static int wl1271_prepare_tx_frame(struct wl1271 *wl, struct sk_buff *skb,
 	 * In special cases, we want to align to a specific block size
 	 * (eg. for wl128x with SDIO we align to 256).
 	 */
-	if (wl->block_size)
-		total_len = ALIGN(skb->len, wl->block_size);
-	else
-		total_len = ALIGN(skb->len, WL1271_TX_ALIGN_TO);
+	total_len = wl12xx_calc_packet_alignment(wl, skb->len);
 
 	memcpy(wl->aggr_buf + buf_offset, skb->data, skb->len);
 	memset(wl->aggr_buf + buf_offset + skb->len, 0, total_len - skb->len);
diff --git a/drivers/net/wireless/wl12xx/tx.h b/drivers/net/wireless/wl12xx/tx.h
index a3877ba32d3..d6b05d98062 100644
--- a/drivers/net/wireless/wl12xx/tx.h
+++ b/drivers/net/wireless/wl12xx/tx.h
@@ -89,6 +89,15 @@ struct wl128x_tx_mem {
 	u8 extra_bytes;
 } __packed;
 
+/*
+ * On wl128x based devices, when TX packets are aggregated, each packet
+ * size must be aligned to the SDIO block size. The maximum block size
+ * is bounded by the type of the padded bytes field that is sent to the
+ * FW. Currently the type is u8, so the maximum block size is 256 bytes.
+ */
+#define WL12XX_BUS_BLOCK_SIZE min(512u,	\
+	    (1u << (8 * sizeof(((struct wl128x_tx_mem *) 0)->extra_bytes))))
+
 struct wl1271_tx_hw_descr {
 	/* Length of packet in words, including descriptor+header+data */
 	__le16 length;
diff --git a/drivers/net/wireless/wl12xx/wl12xx.h b/drivers/net/wireless/wl12xx/wl12xx.h
index c1294595884..c7c42b687f5 100644
--- a/drivers/net/wireless/wl12xx/wl12xx.h
+++ b/drivers/net/wireless/wl12xx/wl12xx.h
@@ -323,7 +323,7 @@ struct wl1271_if_operations {
 	struct device* (*dev)(struct wl1271 *wl);
 	void (*enable_irq)(struct wl1271 *wl);
 	void (*disable_irq)(struct wl1271 *wl);
-	void (*set_block_size) (struct wl1271 *wl);
+	void (*set_block_size) (struct wl1271 *wl, unsigned int blksz);
 };
 
 #define MAX_NUM_KEYS 14
@@ -558,7 +558,6 @@ struct wl1271 {
 	bool ba_support;
 	u8 ba_rx_bitmap;
 
-	u32 block_size;
 	int tcxo_clock;
 
 	/*
@@ -610,12 +609,15 @@ int wl1271_plt_stop(struct wl1271 *wl);
 /* Quirks */
 
 /* Each RX/TX transaction requires an end-of-transaction transfer */
-#define WL12XX_QUIRK_END_OF_TRANSACTION	BIT(0)
+#define WL12XX_QUIRK_END_OF_TRANSACTION		BIT(0)
 
 /*
  * Older firmwares use 2 spare TX blocks
  * (for STA < 6.1.3.50.58 or for AP < 6.2.0.0.47)
  */
-#define WL12XX_QUIRK_USE_2_SPARE_BLOCKS BIT(1)
+#define WL12XX_QUIRK_USE_2_SPARE_BLOCKS		BIT(1)
+
+/* WL128X requires aggregated packets to be aligned to the SDIO block size */
+#define WL12XX_QUIRK_BLOCKSIZE_ALIGNMENT	BIT(2)
 
 #endif
-- 
cgit v1.2.3-70-g09d2


From 990f5de7384f9e5922e4c7c7572cbf4f29a9441e Mon Sep 17 00:00:00 2001
From: Ido Yariv <ido@wizery.com>
Date: Thu, 31 Mar 2011 10:06:59 +0200
Subject: wl12xx: Clean up the dummy packet mechanism

The current implementation allocates a skb each time one is requested by
the firmware. Since dummy packets are handled differently than regular
packets, the skb needs to be marked. Currently, this is done by
setting the pkt_type member to 5. This might not be safe, as we cannot
be sure that there won't be any other packets with this pkt_type value.

Since the packet does not change from one request to another, we can
simply allocate a dummy packet template and always send it. All changes
to the skb done during packet preparation must be reverted, so the same
skb can be reused.

The dummy packets are not transmitted, therefore there's no need to set
the BSSID or our own MAC address.

In addition, the header portion of the packet was zeroed by mistake, so
fix that as well.

Signed-off-by: Ido Yariv <ido@wizery.com>
Signed-off-by: Luciano Coelho <coelho@ti.com>
---
 drivers/net/wireless/wl12xx/main.c   | 79 ++++++++++++++++++++++++------------
 drivers/net/wireless/wl12xx/tx.c     | 43 ++++++++++++++------
 drivers/net/wireless/wl12xx/tx.h     |  2 -
 drivers/net/wireless/wl12xx/wl12xx.h |  4 ++
 4 files changed, 89 insertions(+), 39 deletions(-)

(limited to 'drivers/net/wireless/wl12xx')

diff --git a/drivers/net/wireless/wl12xx/main.c b/drivers/net/wireless/wl12xx/main.c
index 1cd396306e7..7dce24c0b33 100644
--- a/drivers/net/wireless/wl12xx/main.c
+++ b/drivers/net/wireless/wl12xx/main.c
@@ -1212,20 +1212,46 @@ static void wl1271_op_tx(struct ieee80211_hw *hw, struct sk_buff *skb)
 	spin_unlock_irqrestore(&wl->wl_lock, flags);
 }
 
-#define TX_DUMMY_PACKET_SIZE 1400
 int wl1271_tx_dummy_packet(struct wl1271 *wl)
 {
-	struct sk_buff *skb = NULL;
+	unsigned long flags;
+
+	spin_lock_irqsave(&wl->wl_lock, flags);
+	set_bit(WL1271_FLAG_DUMMY_PACKET_PENDING, &wl->flags);
+	wl->tx_queue_count++;
+	spin_unlock_irqrestore(&wl->wl_lock, flags);
+
+	/* The FW is low on RX memory blocks, so send the dummy packet asap */
+	if (!test_bit(WL1271_FLAG_FW_TX_BUSY, &wl->flags))
+		wl1271_tx_work_locked(wl);
+
+	/*
+	 * If the FW TX is busy, TX work will be scheduled by the threaded
+	 * interrupt handler function
+	 */
+	return 0;
+}
+
+/*
+ * The size of the dummy packet should be at least 1400 bytes. However, in
+ * order to minimize the number of bus transactions, aligning it to 512 bytes
+ * boundaries could be beneficial, performance wise
+ */
+#define TOTAL_TX_DUMMY_PACKET_SIZE (ALIGN(1400, 512))
+
+struct sk_buff *wl12xx_alloc_dummy_packet(struct wl1271 *wl)
+{
+	struct sk_buff *skb;
 	struct ieee80211_hdr_3addr *hdr;
-	int ret = 0;
+	unsigned int dummy_packet_size;
+
+	dummy_packet_size = TOTAL_TX_DUMMY_PACKET_SIZE -
+			    sizeof(struct wl1271_tx_hw_descr) - sizeof(*hdr);
 
-	skb = dev_alloc_skb(
-		sizeof(struct wl1271_tx_hw_descr) + sizeof(*hdr) +
-		TX_DUMMY_PACKET_SIZE);
+	skb = dev_alloc_skb(TOTAL_TX_DUMMY_PACKET_SIZE);
 	if (!skb) {
-		wl1271_warning("failed to allocate buffer for dummy packet");
-		ret = -ENOMEM;
-		goto out;
+		wl1271_warning("Failed to allocate a dummy packet skb");
+		return NULL;
 	}
 
 	skb_reserve(skb, sizeof(struct wl1271_tx_hw_descr));
@@ -1233,29 +1259,22 @@ int wl1271_tx_dummy_packet(struct wl1271 *wl)
 	hdr = (struct ieee80211_hdr_3addr *) skb_put(skb, sizeof(*hdr));
 	memset(hdr, 0, sizeof(*hdr));
 	hdr->frame_control = cpu_to_le16(IEEE80211_FTYPE_DATA |
-					 IEEE80211_FCTL_TODS  |
-					 IEEE80211_STYPE_NULLFUNC);
-
-	memcpy(hdr->addr1, wl->bssid, ETH_ALEN);
-	memcpy(hdr->addr2, wl->mac_addr, ETH_ALEN);
-	memcpy(hdr->addr3, wl->bssid, ETH_ALEN);
+					 IEEE80211_STYPE_NULLFUNC |
+					 IEEE80211_FCTL_TODS);
 
-	skb_put(skb, TX_DUMMY_PACKET_SIZE);
+	memset(skb_put(skb, dummy_packet_size), 0, dummy_packet_size);
 
-	memset(skb->data, 0, TX_DUMMY_PACKET_SIZE);
-
-	skb->pkt_type = TX_PKT_TYPE_DUMMY_REQ;
 	/* Dummy packets require the TID to be management */
 	skb->priority = WL1271_TID_MGMT;
-	/* CONF_TX_AC_VO */
-	skb->queue_mapping = 0;
 
-	wl1271_op_tx(wl->hw, skb);
+	/* Initialize all fields that might be used */
+	skb->queue_mapping = 0;
+	memset(IEEE80211_SKB_CB(skb), 0, sizeof(struct ieee80211_tx_info));
 
-out:
-	return ret;
+	return skb;
 }
 
+
 static struct notifier_block wl1271_dev_notifier = {
 	.notifier_call = wl1271_dev_notify,
 };
@@ -3653,11 +3672,17 @@ struct ieee80211_hw *wl1271_alloc_hw(void)
 		goto err_hw;
 	}
 
+	wl->dummy_packet = wl12xx_alloc_dummy_packet(wl);
+	if (!wl->dummy_packet) {
+		ret = -ENOMEM;
+		goto err_aggr;
+	}
+
 	/* Register platform device */
 	ret = platform_device_register(wl->plat_dev);
 	if (ret) {
 		wl1271_error("couldn't register platform device");
-		goto err_aggr;
+		goto err_dummy_packet;
 	}
 	dev_set_drvdata(&wl->plat_dev->dev, wl);
 
@@ -3683,6 +3708,9 @@ err_bt_coex_state:
 err_platform:
 	platform_device_unregister(wl->plat_dev);
 
+err_dummy_packet:
+	dev_kfree_skb(wl->dummy_packet);
+
 err_aggr:
 	free_pages((unsigned long)wl->aggr_buf, order);
 
@@ -3702,6 +3730,7 @@ EXPORT_SYMBOL_GPL(wl1271_alloc_hw);
 int wl1271_free_hw(struct wl1271 *wl)
 {
 	platform_device_unregister(wl->plat_dev);
+	dev_kfree_skb(wl->dummy_packet);
 	free_pages((unsigned long)wl->aggr_buf,
 			get_order(WL1271_AGGR_BUFFER_SIZE));
 	kfree(wl->plat_dev);
diff --git a/drivers/net/wireless/wl12xx/tx.c b/drivers/net/wireless/wl12xx/tx.c
index ba69ba7051f..67245ad396e 100644
--- a/drivers/net/wireless/wl12xx/tx.c
+++ b/drivers/net/wireless/wl12xx/tx.c
@@ -219,6 +219,11 @@ static int wl1271_tx_allocate(struct wl1271 *wl, struct sk_buff *skb, u32 extra,
 	return ret;
 }
 
+static bool wl12xx_is_dummy_packet(struct wl1271 *wl, struct sk_buff *skb)
+{
+	return wl->dummy_packet == skb;
+}
+
 static void wl1271_tx_fill_hdr(struct wl1271 *wl, struct sk_buff *skb,
 			      u32 extra, struct ieee80211_tx_info *control,
 			      u8 hlid)
@@ -253,7 +258,7 @@ static void wl1271_tx_fill_hdr(struct wl1271 *wl, struct sk_buff *skb,
 	ac = wl1271_tx_get_queue(skb_get_queue_mapping(skb));
 	desc->tid = skb->priority;
 
-	if (skb->pkt_type == TX_PKT_TYPE_DUMMY_REQ) {
+	if (wl12xx_is_dummy_packet(wl, skb)) {
 		/*
 		 * FW expects the dummy packet to have an invalid session id -
 		 * any session id that is different than the one set in the join
@@ -396,6 +401,10 @@ static int wl1271_prepare_tx_frame(struct wl1271 *wl, struct sk_buff *skb,
 	memcpy(wl->aggr_buf + buf_offset, skb->data, skb->len);
 	memset(wl->aggr_buf + buf_offset + skb->len, 0, total_len - skb->len);
 
+	/* Revert side effects in the dummy packet skb, so it can be reused */
+	if (wl12xx_is_dummy_packet(wl, skb))
+		skb_pull(skb, sizeof(struct wl1271_tx_hw_descr));
+
 	return total_len;
 }
 
@@ -508,10 +517,23 @@ out:
 
 static struct sk_buff *wl1271_skb_dequeue(struct wl1271 *wl)
 {
+	unsigned long flags;
+	struct sk_buff *skb = NULL;
+
 	if (wl->bss_type == BSS_TYPE_AP_BSS)
-		return wl1271_ap_skb_dequeue(wl);
+		skb = wl1271_ap_skb_dequeue(wl);
+	else
+		skb = wl1271_sta_skb_dequeue(wl);
 
-	return wl1271_sta_skb_dequeue(wl);
+	if (!skb &&
+	    test_and_clear_bit(WL1271_FLAG_DUMMY_PACKET_PENDING, &wl->flags)) {
+		skb = wl->dummy_packet;
+		spin_lock_irqsave(&wl->wl_lock, flags);
+		wl->tx_queue_count--;
+		spin_unlock_irqrestore(&wl->wl_lock, flags);
+	}
+
+	return skb;
 }
 
 static void wl1271_skb_queue_head(struct wl1271 *wl, struct sk_buff *skb)
@@ -519,7 +541,9 @@ static void wl1271_skb_queue_head(struct wl1271 *wl, struct sk_buff *skb)
 	unsigned long flags;
 	int q = wl1271_tx_get_queue(skb_get_queue_mapping(skb));
 
-	if (wl->bss_type == BSS_TYPE_AP_BSS) {
+	if (wl12xx_is_dummy_packet(wl, skb)) {
+		set_bit(WL1271_FLAG_DUMMY_PACKET_PENDING, &wl->flags);
+	} else if (wl->bss_type == BSS_TYPE_AP_BSS) {
 		u8 hlid = wl1271_tx_get_hlid(skb);
 		skb_queue_head(&wl->links[hlid].tx_queue[q], skb);
 
@@ -628,8 +652,7 @@ static void wl1271_tx_complete_packet(struct wl1271 *wl,
 	skb = wl->tx_frames[id];
 	info = IEEE80211_SKB_CB(skb);
 
-	if (skb->pkt_type == TX_PKT_TYPE_DUMMY_REQ) {
-		dev_kfree_skb(skb);
+	if (wl12xx_is_dummy_packet(wl, skb)) {
 		wl1271_free_tx_id(wl, id);
 		return;
 	}
@@ -764,9 +787,7 @@ void wl1271_tx_reset(struct wl1271 *wl)
 				wl1271_debug(DEBUG_TX, "freeing skb 0x%p",
 					     skb);
 
-				if (skb->pkt_type == TX_PKT_TYPE_DUMMY_REQ) {
-					dev_kfree_skb(skb);
-				} else {
+				if (!wl12xx_is_dummy_packet(wl, skb)) {
 					info = IEEE80211_SKB_CB(skb);
 					info->status.rates[0].idx = -1;
 					info->status.rates[0].count = 0;
@@ -792,9 +813,7 @@ void wl1271_tx_reset(struct wl1271 *wl)
 		wl1271_free_tx_id(wl, i);
 		wl1271_debug(DEBUG_TX, "freeing skb 0x%p", skb);
 
-		if (skb->pkt_type == TX_PKT_TYPE_DUMMY_REQ) {
-			dev_kfree_skb(skb);
-		} else {
+		if (!wl12xx_is_dummy_packet(wl, skb)) {
 			/*
 			 * Remove private headers before passing the skb to
 			 * mac80211
diff --git a/drivers/net/wireless/wl12xx/tx.h b/drivers/net/wireless/wl12xx/tx.h
index d6b05d98062..fc7835c4cf6 100644
--- a/drivers/net/wireless/wl12xx/tx.h
+++ b/drivers/net/wireless/wl12xx/tx.h
@@ -42,8 +42,6 @@
 #define TX_HW_ATTR_TX_CMPLT_REQ          BIT(12)
 #define TX_HW_ATTR_TX_DUMMY_REQ          BIT(13)
 
-#define TX_PKT_TYPE_DUMMY_REQ            5
-
 #define TX_HW_ATTR_OFST_SAVE_RETRIES     0
 #define TX_HW_ATTR_OFST_HEADER_PAD       1
 #define TX_HW_ATTR_OFST_SESSION_COUNTER  2
diff --git a/drivers/net/wireless/wl12xx/wl12xx.h b/drivers/net/wireless/wl12xx/wl12xx.h
index c7c42b687f5..1b430d2aec4 100644
--- a/drivers/net/wireless/wl12xx/wl12xx.h
+++ b/drivers/net/wireless/wl12xx/wl12xx.h
@@ -356,6 +356,7 @@ enum wl12xx_flags {
 	WL1271_FLAG_FW_TX_BUSY,
 	WL1271_FLAG_AP_STARTED,
 	WL1271_FLAG_IF_INITIALIZED,
+	WL1271_FLAG_DUMMY_PACKET_PENDING,
 };
 
 struct wl1271_link {
@@ -461,6 +462,9 @@ struct wl1271 {
 	/* Intermediate buffer, used for packet aggregation */
 	u8 *aggr_buf;
 
+	/* Reusable dummy packet template */
+	struct sk_buff *dummy_packet;
+
 	/* Network stack work  */
 	struct work_struct netstack_work;
 
-- 
cgit v1.2.3-70-g09d2


From d2f4d47d84f8c665ab9babb2cc84d2e7872a96e1 Mon Sep 17 00:00:00 2001
From: Ido Yariv <ido@wizery.com>
Date: Thu, 31 Mar 2011 10:07:00 +0200
Subject: wl12xx: Simplify TX blocks accounting

The total number of TX memory blocks may change when the dynamic memory
option is enabled. The current implementation only tracks the available
memory blocks, which over-complicates TX blocks accounting.

By tracking the number of allocated blocks, calculation of the number of
available blocks becomes simpler and cleaner. It simply equals the total
number of TX memory blocks minus the allocated ones.

Also, remove some unnecessary castings and use union member accesses
instead.

Signed-off-by: Ido Yariv <ido@wizery.com>
Signed-off-by: Arik Nemtsov <arik@wizery.com>
Signed-off-by: Luciano Coelho <coelho@ti.com>
---
 drivers/net/wireless/wl12xx/acx.c    |  2 --
 drivers/net/wireless/wl12xx/main.c   | 48 +++++++++++++++++-------------------
 drivers/net/wireless/wl12xx/tx.c     |  1 +
 drivers/net/wireless/wl12xx/wl12xx.h |  4 +--
 4 files changed, 24 insertions(+), 31 deletions(-)

(limited to 'drivers/net/wireless/wl12xx')

diff --git a/drivers/net/wireless/wl12xx/acx.c b/drivers/net/wireless/wl12xx/acx.c
index e005aa40ef8..b277947400b 100644
--- a/drivers/net/wireless/wl12xx/acx.c
+++ b/drivers/net/wireless/wl12xx/acx.c
@@ -1081,8 +1081,6 @@ int wl1271_acx_init_mem_config(struct wl1271 *wl)
 	wl1271_debug(DEBUG_TX, "available tx blocks: %d",
 		     wl->tx_blocks_available);
 
-	wl->tx_new_total = wl->tx_blocks_available;
-
 	return 0;
 }
 
diff --git a/drivers/net/wireless/wl12xx/main.c b/drivers/net/wireless/wl12xx/main.c
index 7dce24c0b33..1feb9551ef8 100644
--- a/drivers/net/wireless/wl12xx/main.c
+++ b/drivers/net/wireless/wl12xx/main.c
@@ -622,7 +622,7 @@ static void wl1271_fw_status(struct wl1271 *wl,
 	struct wl1271_fw_common_status *status = &full_status->common;
 	struct timespec ts;
 	u32 old_tx_blk_count = wl->tx_blocks_available;
-	u32 total = 0;
+	u32 freed_blocks = 0;
 	int i;
 
 	if (wl->bss_type == BSS_TYPE_AP_BSS) {
@@ -631,15 +631,6 @@ static void wl1271_fw_status(struct wl1271 *wl,
 	} else {
 		wl1271_raw_read(wl, FW_STATUS_ADDR, status,
 				sizeof(struct wl1271_fw_sta_status), false);
-
-		/* Update tx total blocks change */
-		wl->tx_total_diff +=
-			((struct wl1271_fw_sta_status *)status)->tx_total -
-			wl->tx_new_total;
-
-		/* Update total tx blocks */
-		wl->tx_new_total =
-			((struct wl1271_fw_sta_status *)status)->tx_total;
 	}
 
 	wl1271_debug(DEBUG_IRQ, "intr: 0x%x (fw_rx_counter = %d, "
@@ -651,34 +642,38 @@ static void wl1271_fw_status(struct wl1271 *wl,
 
 	/* update number of available TX blocks */
 	for (i = 0; i < NUM_TX_QUEUES; i++) {
-		total += le32_to_cpu(status->tx_released_blks[i]) -
-			wl->tx_blocks_freed[i];
+		freed_blocks += le32_to_cpu(status->tx_released_blks[i]) -
+				wl->tx_blocks_freed[i];
 
 		wl->tx_blocks_freed[i] =
 			le32_to_cpu(status->tx_released_blks[i]);
-
 	}
 
-	/*
-	 * By adding the freed blocks to tx_total_diff we are actually
-	 * moving them to the RX pool.
-	 */
-	wl->tx_total_diff += total;
+	wl->tx_allocated_blocks -= freed_blocks;
+
+	if (wl->bss_type == BSS_TYPE_AP_BSS) {
+		/* Update num of allocated TX blocks per link and ps status */
+		wl1271_irq_update_links_status(wl, &full_status->ap);
+		wl->tx_blocks_available += freed_blocks;
+	} else {
+		int avail = full_status->sta.tx_total - wl->tx_allocated_blocks;
 
-	/* if we have positive difference, add the blocks to the TX pool */
-	if (wl->tx_total_diff >= 0) {
-		wl->tx_blocks_available += wl->tx_total_diff;
-		wl->tx_total_diff = 0;
+		/*
+		 * The FW might change the total number of TX memblocks before
+		 * we get a notification about blocks being released. Thus, the
+		 * available blocks calculation might yield a temporary result
+		 * which is lower than the actual available blocks. Keeping in
+		 * mind that only blocks that were allocated can be moved from
+		 * TX to RX, tx_blocks_available should never decrease here.
+		 */
+		wl->tx_blocks_available = max((int)wl->tx_blocks_available,
+					      avail);
 	}
 
 	/* if more blocks are available now, tx work can be scheduled */
 	if (wl->tx_blocks_available > old_tx_blk_count)
 		clear_bit(WL1271_FLAG_FW_TX_BUSY, &wl->flags);
 
-	/* for AP update num of allocated TX blocks per link and ps status */
-	if (wl->bss_type == BSS_TYPE_AP_BSS)
-		wl1271_irq_update_links_status(wl, &full_status->ap);
-
 	/* update the host-chipset time offset */
 	getnstimeofday(&ts);
 	wl->time_offset = (timespec_to_ns(&ts) >> 10) -
@@ -1495,6 +1490,7 @@ static void __wl1271_op_remove_interface(struct wl1271 *wl)
 	wl->psm_entry_retry = 0;
 	wl->power_level = WL1271_DEFAULT_POWER_LEVEL;
 	wl->tx_blocks_available = 0;
+	wl->tx_allocated_blocks = 0;
 	wl->tx_results_count = 0;
 	wl->tx_packets_count = 0;
 	wl->tx_security_last_seq = 0;
diff --git a/drivers/net/wireless/wl12xx/tx.c b/drivers/net/wireless/wl12xx/tx.c
index 67245ad396e..7a3339fd341 100644
--- a/drivers/net/wireless/wl12xx/tx.c
+++ b/drivers/net/wireless/wl12xx/tx.c
@@ -203,6 +203,7 @@ static int wl1271_tx_allocate(struct wl1271 *wl, struct sk_buff *skb, u32 extra,
 		desc->id = id;
 
 		wl->tx_blocks_available -= total_blocks;
+		wl->tx_allocated_blocks += total_blocks;
 
 		if (wl->bss_type == BSS_TYPE_AP_BSS)
 			wl->links[hlid].allocated_blks += total_blocks;
diff --git a/drivers/net/wireless/wl12xx/wl12xx.h b/drivers/net/wireless/wl12xx/wl12xx.h
index 1b430d2aec4..9ccbcfdd080 100644
--- a/drivers/net/wireless/wl12xx/wl12xx.h
+++ b/drivers/net/wireless/wl12xx/wl12xx.h
@@ -418,10 +418,8 @@ struct wl1271 {
 	/* Accounting for allocated / available TX blocks on HW */
 	u32 tx_blocks_freed[NUM_TX_QUEUES];
 	u32 tx_blocks_available;
+	u32 tx_allocated_blocks;
 	u32 tx_results_count;
-	/* Indicates how many memory blocks should be moved to the RX pool */
-	int tx_total_diff;
-	u32 tx_new_total;
 
 	/* Transmitted TX packets counter for chipset interface */
 	u32 tx_packets_count;
-- 
cgit v1.2.3-70-g09d2


From 341b7cde6ccc60672fcd7fc84dd24a1b7c0b8d94 Mon Sep 17 00:00:00 2001
From: Ido Yariv <ido@wizery.com>
Date: Thu, 31 Mar 2011 10:07:01 +0200
Subject: wl12xx: Handle platforms without level trigger interrupts

Some platforms are incapable of triggering on level interrupts. Add a
platform quirks member in the platform data structure, as well as an
edge interrupt quirk which can be set on such platforms.

When the interrupt is requested with IRQF_TRIGGER_RISING, IRQF_ONESHOT
cannot be used, as we might miss interrupts that occur after the FW
status is cleared and before the threaded interrupt handler exits.

Moreover, when IRQF_ONESHOT is not set, iterating more than once in the
threaded interrupt handler introduces a few race conditions between this
handler and the hardirq handler. Currently this is worked around by
limiting the loop to one iteration only. This workaround has an impact
on performance. To remove to this restriction, the race conditions will
need to be addressed.

Signed-off-by: Ido Yariv <ido@wizery.com>
Signed-off-by: Luciano Coelho <coelho@ti.com>
---
 drivers/net/wireless/wl12xx/main.c   | 9 +++++++++
 drivers/net/wireless/wl12xx/sdio.c   | 9 ++++++++-
 drivers/net/wireless/wl12xx/spi.c    | 9 ++++++++-
 drivers/net/wireless/wl12xx/wl12xx.h | 3 +++
 include/linux/wl12xx.h               | 4 ++++
 5 files changed, 32 insertions(+), 2 deletions(-)

(limited to 'drivers/net/wireless/wl12xx')

diff --git a/drivers/net/wireless/wl12xx/main.c b/drivers/net/wireless/wl12xx/main.c
index 1feb9551ef8..7126506611c 100644
--- a/drivers/net/wireless/wl12xx/main.c
+++ b/drivers/net/wireless/wl12xx/main.c
@@ -30,6 +30,7 @@
 #include <linux/vmalloc.h>
 #include <linux/platform_device.h>
 #include <linux/slab.h>
+#include <linux/wl12xx.h>
 
 #include "wl12xx.h"
 #include "wl12xx_80211.h"
@@ -719,6 +720,13 @@ irqreturn_t wl1271_irq(int irq, void *cookie)
 	set_bit(WL1271_FLAG_TX_PENDING, &wl->flags);
 	cancel_work_sync(&wl->tx_work);
 
+	/*
+	 * In case edge triggered interrupt must be used, we cannot iterate
+	 * more than once without introducing race conditions with the hardirq.
+	 */
+	if (wl->platform_quirks & WL12XX_PLATFORM_QUIRK_EDGE_IRQ)
+		loopcount = 1;
+
 	mutex_lock(&wl->mutex);
 
 	wl1271_debug(DEBUG_IRQ, "IRQ work");
@@ -3648,6 +3656,7 @@ struct ieee80211_hw *wl1271_alloc_hw(void)
 	wl->ap_ps_map = 0;
 	wl->ap_fw_ps_map = 0;
 	wl->quirks = 0;
+	wl->platform_quirks = 0;
 
 	memset(wl->tx_frames_map, 0, sizeof(wl->tx_frames_map));
 	for (i = 0; i < ACX_TX_DESCRIPTORS; i++)
diff --git a/drivers/net/wireless/wl12xx/sdio.c b/drivers/net/wireless/wl12xx/sdio.c
index 8246e9de430..bcd4ad7ba90 100644
--- a/drivers/net/wireless/wl12xx/sdio.c
+++ b/drivers/net/wireless/wl12xx/sdio.c
@@ -220,6 +220,7 @@ static int __devinit wl1271_probe(struct sdio_func *func,
 	struct ieee80211_hw *hw;
 	const struct wl12xx_platform_data *wlan_data;
 	struct wl1271 *wl;
+	unsigned long irqflags;
 	int ret;
 
 	/* We are only able to handle the wlan function */
@@ -251,9 +252,15 @@ static int __devinit wl1271_probe(struct sdio_func *func,
 	wl->irq = wlan_data->irq;
 	wl->ref_clock = wlan_data->board_ref_clock;
 	wl->tcxo_clock = wlan_data->board_tcxo_clock;
+	wl->platform_quirks = wlan_data->platform_quirks;
+
+	if (wl->platform_quirks & WL12XX_PLATFORM_QUIRK_EDGE_IRQ)
+		irqflags = IRQF_TRIGGER_RISING;
+	else
+		irqflags = IRQF_TRIGGER_HIGH | IRQF_ONESHOT;
 
 	ret = request_threaded_irq(wl->irq, wl1271_hardirq, wl1271_irq,
-				   IRQF_TRIGGER_HIGH | IRQF_ONESHOT,
+				   irqflags,
 				   DRIVER_NAME, wl);
 	if (ret < 0) {
 		wl1271_error("request_irq() failed: %d", ret);
diff --git a/drivers/net/wireless/wl12xx/spi.c b/drivers/net/wireless/wl12xx/spi.c
index 7b82b5f0e49..51662bb6801 100644
--- a/drivers/net/wireless/wl12xx/spi.c
+++ b/drivers/net/wireless/wl12xx/spi.c
@@ -364,6 +364,7 @@ static int __devinit wl1271_probe(struct spi_device *spi)
 	struct wl12xx_platform_data *pdata;
 	struct ieee80211_hw *hw;
 	struct wl1271 *wl;
+	unsigned long irqflags;
 	int ret;
 
 	pdata = spi->dev.platform_data;
@@ -402,6 +403,12 @@ static int __devinit wl1271_probe(struct spi_device *spi)
 
 	wl->ref_clock = pdata->board_ref_clock;
 	wl->tcxo_clock = pdata->board_tcxo_clock;
+	wl->platform_quirks = pdata->platform_quirks;
+
+	if (wl->platform_quirks & WL12XX_PLATFORM_QUIRK_EDGE_IRQ)
+		irqflags = IRQF_TRIGGER_RISING;
+	else
+		irqflags = IRQF_TRIGGER_HIGH | IRQF_ONESHOT;
 
 	wl->irq = spi->irq;
 	if (wl->irq < 0) {
@@ -411,7 +418,7 @@ static int __devinit wl1271_probe(struct spi_device *spi)
 	}
 
 	ret = request_threaded_irq(wl->irq, wl1271_hardirq, wl1271_irq,
-				   IRQF_TRIGGER_HIGH | IRQF_ONESHOT,
+				   irqflags,
 				   DRIVER_NAME, wl);
 	if (ret < 0) {
 		wl1271_error("request_irq() failed: %d", ret);
diff --git a/drivers/net/wireless/wl12xx/wl12xx.h b/drivers/net/wireless/wl12xx/wl12xx.h
index 9ccbcfdd080..fb2b79fa42b 100644
--- a/drivers/net/wireless/wl12xx/wl12xx.h
+++ b/drivers/net/wireless/wl12xx/wl12xx.h
@@ -579,6 +579,9 @@ struct wl1271 {
 
 	/* Quirks of specific hardware revisions */
 	unsigned int quirks;
+
+	/* Platform limitations */
+	unsigned int platform_quirks;
 };
 
 struct wl1271_station {
diff --git a/include/linux/wl12xx.h b/include/linux/wl12xx.h
index c1a743ea747..4b697395326 100644
--- a/include/linux/wl12xx.h
+++ b/include/linux/wl12xx.h
@@ -53,8 +53,12 @@ struct wl12xx_platform_data {
 	bool use_eeprom;
 	int board_ref_clock;
 	int board_tcxo_clock;
+	unsigned long platform_quirks;
 };
 
+/* Platform does not support level trigger interrupts */
+#define WL12XX_PLATFORM_QUIRK_EDGE_IRQ	BIT(0)
+
 #ifdef CONFIG_WL12XX_PLATFORM_DATA
 
 int wl12xx_set_platform_data(const struct wl12xx_platform_data *data);
-- 
cgit v1.2.3-70-g09d2


From 6277ed65704d19377b0874618e5f23d64c9e71a6 Mon Sep 17 00:00:00 2001
From: Luciano Coelho <coelho@ti.com>
Date: Fri, 1 Apr 2011 17:49:54 +0300
Subject: wl12xx: use kstrtoul functions

Use the new kstrtoul functions instead of the deprecated strict_strtoul().

Signed-off-by: Luciano Coelho <coelho@ti.com>
---
 drivers/net/wireless/wl12xx/debugfs.c | 2 +-
 drivers/net/wireless/wl12xx/main.c    | 3 +--
 2 files changed, 2 insertions(+), 3 deletions(-)

(limited to 'drivers/net/wireless/wl12xx')

diff --git a/drivers/net/wireless/wl12xx/debugfs.c b/drivers/net/wireless/wl12xx/debugfs.c
index 8e75b09723b..70ab1986788 100644
--- a/drivers/net/wireless/wl12xx/debugfs.c
+++ b/drivers/net/wireless/wl12xx/debugfs.c
@@ -267,7 +267,7 @@ static ssize_t gpio_power_write(struct file *file,
 	}
 	buf[len] = '\0';
 
-	ret = strict_strtoul(buf, 0, &value);
+	ret = kstrtoul(buf, 0, &value);
 	if (ret < 0) {
 		wl1271_warning("illegal value in gpio_power");
 		return -EINVAL;
diff --git a/drivers/net/wireless/wl12xx/main.c b/drivers/net/wireless/wl12xx/main.c
index 7126506611c..a5a5d013302 100644
--- a/drivers/net/wireless/wl12xx/main.c
+++ b/drivers/net/wireless/wl12xx/main.c
@@ -3397,8 +3397,7 @@ static ssize_t wl1271_sysfs_store_bt_coex_state(struct device *dev,
 	unsigned long res;
 	int ret;
 
-	ret = strict_strtoul(buf, 10, &res);
-
+	ret = kstrtoul(buf, 10, &res);
 	if (ret < 0) {
 		wl1271_warning("incorrect value written to bt_coex_mode");
 		return count;
-- 
cgit v1.2.3-70-g09d2


From afb7d3cd805df7a206439a7e7b5d1167d2bb06f6 Mon Sep 17 00:00:00 2001
From: Luciano Coelho <coelho@ti.com>
Date: Fri, 1 Apr 2011 20:48:02 +0300
Subject: wl12xx: move hardcoded hci_io_ds value into the conf struct

Instead of hardcoding the hci_io_ds configuration that we write to the
SDIO_IO_DS top registed, read it from the default configuration so
that it's easier to change for different platforms.

Reported-by: Ido Yariv <ido@wizery.com>
Signed-off-by: Luciano Coelho <coelho@ti.com>
---
 drivers/net/wireless/wl12xx/boot.c |  2 +-
 drivers/net/wireless/wl12xx/boot.h | 11 +++++++----
 drivers/net/wireless/wl12xx/conf.h |  1 +
 drivers/net/wireless/wl12xx/main.c |  1 +
 4 files changed, 10 insertions(+), 5 deletions(-)

(limited to 'drivers/net/wireless/wl12xx')

diff --git a/drivers/net/wireless/wl12xx/boot.c b/drivers/net/wireless/wl12xx/boot.c
index b5ec2c2b6f7..2b0cf85788b 100644
--- a/drivers/net/wireless/wl12xx/boot.c
+++ b/drivers/net/wireless/wl12xx/boot.c
@@ -779,7 +779,7 @@ int wl1271_load_firmware(struct wl1271 *wl)
 	 * to upload_fw) */
 
 	if (wl->chip.id == CHIP_ID_1283_PG20)
-		wl1271_top_reg_write(wl, SDIO_IO_DS, HCI_IO_DS_6MA);
+		wl1271_top_reg_write(wl, SDIO_IO_DS, wl->conf.hci_io_ds);
 
 	ret = wl1271_boot_upload_firmware(wl);
 	if (ret < 0)
diff --git a/drivers/net/wireless/wl12xx/boot.h b/drivers/net/wireless/wl12xx/boot.h
index d9de64ac144..e8f8255bbab 100644
--- a/drivers/net/wireless/wl12xx/boot.h
+++ b/drivers/net/wireless/wl12xx/boot.h
@@ -117,10 +117,13 @@ struct wl1271_static_data {
 #define SDIO_IO_DS                   0xd14
 
 /* SDIO/wSPI DS configuration values */
-#define HCI_IO_DS_8MA                0
-#define HCI_IO_DS_4MA                1 /* default */
-#define HCI_IO_DS_6MA                2
-#define HCI_IO_DS_2MA                3
+enum {
+	HCI_IO_DS_8MA = 0,
+	HCI_IO_DS_4MA = 1, /* default */
+	HCI_IO_DS_6MA = 2,
+	HCI_IO_DS_2MA = 3,
+};
+
 /* end PLL configuration algorithm for wl128x */
 
 #endif
diff --git a/drivers/net/wireless/wl12xx/conf.h b/drivers/net/wireless/wl12xx/conf.h
index 743bd0beb63..52269d4d362 100644
--- a/drivers/net/wireless/wl12xx/conf.h
+++ b/drivers/net/wireless/wl12xx/conf.h
@@ -1206,6 +1206,7 @@ struct conf_drv_settings {
 	struct conf_ht_setting ht;
 	struct conf_memory_settings mem_wl127x;
 	struct conf_memory_settings mem_wl128x;
+	u8 hci_io_ds;
 };
 
 #endif
diff --git a/drivers/net/wireless/wl12xx/main.c b/drivers/net/wireless/wl12xx/main.c
index a5a5d013302..732fd21beaf 100644
--- a/drivers/net/wireless/wl12xx/main.c
+++ b/drivers/net/wireless/wl12xx/main.c
@@ -319,6 +319,7 @@ static struct conf_drv_settings default_conf = {
 		.min_req_rx_blocks            = 22,
 		.tx_min                       = 27,
 	},
+	.hci_io_ds = HCI_IO_DS_6MA,
 };
 
 static void __wl1271_op_remove_interface(struct wl1271 *wl);
-- 
cgit v1.2.3-70-g09d2


From 4ec23d6e136c890806f0e00bcf24e2e3a242b30a Mon Sep 17 00:00:00 2001
From: Luciano Coelho <coelho@ti.com>
Date: Fri, 1 Apr 2011 20:55:01 +0300
Subject: wl12xx: remove unused conf_radio_params structure

This structure has not been used anymore since commit
e6b190ff3c2f4e4859502c41fa17b5c595e82000.

Signed-off-by: Luciano Coelho <coelho@ti.com>
---
 drivers/net/wireless/wl12xx/conf.h | 9 ---------
 1 file changed, 9 deletions(-)

(limited to 'drivers/net/wireless/wl12xx')

diff --git a/drivers/net/wireless/wl12xx/conf.h b/drivers/net/wireless/wl12xx/conf.h
index 52269d4d362..6c9e3a673e6 100644
--- a/drivers/net/wireless/wl12xx/conf.h
+++ b/drivers/net/wireless/wl12xx/conf.h
@@ -1020,15 +1020,6 @@ enum single_dual_band_enum {
 #define CONF_NUMBER_OF_CHANNELS_2_4 14
 #define CONF_NUMBER_OF_CHANNELS_5   35
 
-struct conf_radio_parms {
-	/*
-	 * FEM parameter set to use
-	 *
-	 * Range: 0 or 1
-	 */
-	u8 fem;
-};
-
 struct conf_itrim_settings {
 	/* enable dco itrim */
 	u8 enable;
-- 
cgit v1.2.3-70-g09d2


From cf27d8677515441602f5e4e40f90448e964504b8 Mon Sep 17 00:00:00 2001
From: Luciano Coelho <coelho@ti.com>
Date: Fri, 1 Apr 2011 21:08:23 +0300
Subject: wl12xx: fix sparse warning about undeclared wl12xx_alloc_dummy_packet

Fix sparse warning:

  CHECK   drivers/net/wireless/wl12xx/main.c
drivers/net/wireless/wl12xx/main.c:1246:17: warning: symbol 'wl12xx_alloc_dummy_packet' was not declared. Should it be static?

Signed-off-by: Luciano Coelho <coelho@ti.com>
---
 drivers/net/wireless/wl12xx/main.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'drivers/net/wireless/wl12xx')

diff --git a/drivers/net/wireless/wl12xx/main.c b/drivers/net/wireless/wl12xx/main.c
index 732fd21beaf..866453bc1d1 100644
--- a/drivers/net/wireless/wl12xx/main.c
+++ b/drivers/net/wireless/wl12xx/main.c
@@ -1243,7 +1243,7 @@ int wl1271_tx_dummy_packet(struct wl1271 *wl)
  */
 #define TOTAL_TX_DUMMY_PACKET_SIZE (ALIGN(1400, 512))
 
-struct sk_buff *wl12xx_alloc_dummy_packet(struct wl1271 *wl)
+static struct sk_buff *wl12xx_alloc_dummy_packet(struct wl1271 *wl)
 {
 	struct sk_buff *skb;
 	struct ieee80211_hdr_3addr *hdr;
-- 
cgit v1.2.3-70-g09d2


From 47684808fd89d6809c0886e06f8ac324252499d8 Mon Sep 17 00:00:00 2001
From: Arik Nemtsov <arik@wizery.com>
Date: Tue, 26 Apr 2011 23:21:51 +0300
Subject: wl12xx: support FW TX inactivity triggers

In AP mode we register for the MAX_TX_RETRY and INACTIVE_STA events.
Both are reported to the upper layers as a TX failure in the offending
stations.

In STA mode we register only for the MAX_TX_RETRY event. A TX failure is
interpreted as a loss of connection.

Support for IEEE80211_HW_REPORTS_TX_ACK_STATUS has been removed to avoid
the inherent race condition of a mac80211 TX failure counter in addition
to the FW counter.

This patch depends on "mac80211: allow low level driver to report packet
loss"

Signed-off-by: Arik Nemtsov <arik@wizery.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/wl12xx/acx.c    | 34 ++++++++++++++++++++++----
 drivers/net/wireless/wl12xx/acx.h    | 12 +++++++--
 drivers/net/wireless/wl12xx/boot.c   |  6 +++--
 drivers/net/wireless/wl12xx/cmd.c    |  2 +-
 drivers/net/wireless/wl12xx/conf.h   | 12 +++++++--
 drivers/net/wireless/wl12xx/event.c  | 47 ++++++++++++++++++++++++++++++++++++
 drivers/net/wireless/wl12xx/event.h  | 12 ++++++++-
 drivers/net/wireless/wl12xx/init.c   |  6 ++++-
 drivers/net/wireless/wl12xx/main.c   | 10 ++++++--
 drivers/net/wireless/wl12xx/wl12xx.h |  1 -
 10 files changed, 125 insertions(+), 17 deletions(-)

(limited to 'drivers/net/wireless/wl12xx')

diff --git a/drivers/net/wireless/wl12xx/acx.c b/drivers/net/wireless/wl12xx/acx.c
index b277947400b..a5c9c0aff83 100644
--- a/drivers/net/wireless/wl12xx/acx.c
+++ b/drivers/net/wireless/wl12xx/acx.c
@@ -1524,22 +1524,46 @@ out:
 	return ret;
 }
 
-int wl1271_acx_max_tx_retry(struct wl1271 *wl)
+int wl1271_acx_ap_max_tx_retry(struct wl1271 *wl)
 {
-	struct wl1271_acx_max_tx_retry *acx = NULL;
+	struct wl1271_acx_ap_max_tx_retry *acx = NULL;
 	int ret;
 
-	wl1271_debug(DEBUG_ACX, "acx max tx retry");
+	wl1271_debug(DEBUG_ACX, "acx ap max tx retry");
 
 	acx = kzalloc(sizeof(*acx), GFP_KERNEL);
 	if (!acx)
 		return -ENOMEM;
 
-	acx->max_tx_retry = cpu_to_le16(wl->conf.tx.ap_max_tx_retries);
+	acx->max_tx_retry = cpu_to_le16(wl->conf.tx.max_tx_retries);
 
 	ret = wl1271_cmd_configure(wl, ACX_MAX_TX_FAILURE, acx, sizeof(*acx));
 	if (ret < 0) {
-		wl1271_warning("acx max tx retry failed: %d", ret);
+		wl1271_warning("acx ap max tx retry failed: %d", ret);
+		goto out;
+	}
+
+out:
+	kfree(acx);
+	return ret;
+}
+
+int wl1271_acx_sta_max_tx_retry(struct wl1271 *wl)
+{
+	struct wl1271_acx_sta_max_tx_retry *acx = NULL;
+	int ret;
+
+	wl1271_debug(DEBUG_ACX, "acx sta max tx retry");
+
+	acx = kzalloc(sizeof(*acx), GFP_KERNEL);
+	if (!acx)
+		return -ENOMEM;
+
+	acx->max_tx_retry = wl->conf.tx.max_tx_retries;
+
+	ret = wl1271_cmd_configure(wl, ACX_CONS_TX_FAILURE, acx, sizeof(*acx));
+	if (ret < 0) {
+		wl1271_warning("acx sta max tx retry failed: %d", ret);
 		goto out;
 	}
 
diff --git a/drivers/net/wireless/wl12xx/acx.h b/drivers/net/wireless/wl12xx/acx.h
index 0a40caeab2a..942908cd53a 100644
--- a/drivers/net/wireless/wl12xx/acx.h
+++ b/drivers/net/wireless/wl12xx/acx.h
@@ -1145,7 +1145,7 @@ struct wl1271_acx_fw_tsf_information {
 	u8 padding[3];
 } __packed;
 
-struct wl1271_acx_max_tx_retry {
+struct wl1271_acx_ap_max_tx_retry {
 	struct acx_header header;
 
 	/*
@@ -1156,6 +1156,13 @@ struct wl1271_acx_max_tx_retry {
 	u8 padding_1[2];
 } __packed;
 
+struct wl1271_acx_sta_max_tx_retry {
+	struct acx_header header;
+
+	u8 max_tx_retry;
+	u8 padding_1[3];
+} __packed;
+
 struct wl1271_acx_config_ps {
 	struct acx_header header;
 
@@ -1307,7 +1314,8 @@ int wl1271_acx_set_ba_session(struct wl1271 *wl,
 int wl1271_acx_set_ba_receiver_session(struct wl1271 *wl, u8 tid_index, u16 ssn,
 				       bool enable);
 int wl1271_acx_tsf_info(struct wl1271 *wl, u64 *mactime);
-int wl1271_acx_max_tx_retry(struct wl1271 *wl);
+int wl1271_acx_ap_max_tx_retry(struct wl1271 *wl);
+int wl1271_acx_sta_max_tx_retry(struct wl1271 *wl);
 int wl1271_acx_config_ps(struct wl1271 *wl);
 int wl1271_acx_set_inconnection_sta(struct wl1271 *wl, u8 *addr);
 
diff --git a/drivers/net/wireless/wl12xx/boot.c b/drivers/net/wireless/wl12xx/boot.c
index 2b0cf85788b..d263ebb6f97 100644
--- a/drivers/net/wireless/wl12xx/boot.c
+++ b/drivers/net/wireless/wl12xx/boot.c
@@ -478,10 +478,12 @@ static int wl1271_boot_run_firmware(struct wl1271 *wl)
 		DISCONNECT_EVENT_COMPLETE_ID |
 		RSSI_SNR_TRIGGER_0_EVENT_ID |
 		PSPOLL_DELIVERY_FAILURE_EVENT_ID |
-		SOFT_GEMINI_SENSE_EVENT_ID;
+		SOFT_GEMINI_SENSE_EVENT_ID |
+		MAX_TX_RETRY_EVENT_ID;
 
 	if (wl->bss_type == BSS_TYPE_AP_BSS)
-		wl->event_mask |= STA_REMOVE_COMPLETE_EVENT_ID;
+		wl->event_mask |= STA_REMOVE_COMPLETE_EVENT_ID |
+				  INACTIVE_STA_EVENT_ID;
 	else
 		wl->event_mask |= DUMMY_PACKET_EVENT_ID;
 
diff --git a/drivers/net/wireless/wl12xx/cmd.c b/drivers/net/wireless/wl12xx/cmd.c
index 24680442851..d48331682e7 100644
--- a/drivers/net/wireless/wl12xx/cmd.c
+++ b/drivers/net/wireless/wl12xx/cmd.c
@@ -1070,7 +1070,7 @@ int wl1271_cmd_start_bss(struct wl1271 *wl)
 
 	memcpy(cmd->bssid, bss_conf->bssid, ETH_ALEN);
 
-	cmd->aging_period = cpu_to_le16(WL1271_AP_DEF_INACTIV_SEC);
+	cmd->aging_period = cpu_to_le16(wl->conf.tx.ap_aging_period);
 	cmd->bss_index = WL1271_AP_BSS_INDEX;
 	cmd->global_hlid = WL1271_AP_GLOBAL_HLID;
 	cmd->broadcast_hlid = WL1271_AP_BROADCAST_HLID;
diff --git a/drivers/net/wireless/wl12xx/conf.h b/drivers/net/wireless/wl12xx/conf.h
index 6c9e3a673e6..d16094f2604 100644
--- a/drivers/net/wireless/wl12xx/conf.h
+++ b/drivers/net/wireless/wl12xx/conf.h
@@ -683,10 +683,18 @@ struct conf_tx_settings {
 	struct conf_tx_rate_class ap_bcst_conf;
 
 	/*
-	 * AP-mode - allow this number of TX retries to a station before an
+	 * Allow this number of TX retries to a connected station/AP before an
 	 * event is triggered from FW.
+	 * In AP-mode the hlids of unreachable stations are given in the
+	 * "sta_tx_retry_exceeded" member in the event mailbox.
 	 */
-	u16 ap_max_tx_retries;
+	u8 max_tx_retries;
+
+	/*
+	 * AP-mode - after this number of seconds a connected station is
+	 * considered inactive.
+	 */
+	u16 ap_aging_period;
 
 	/*
 	 * Configuration for TID parameters.
diff --git a/drivers/net/wireless/wl12xx/event.c b/drivers/net/wireless/wl12xx/event.c
index ae69330e807..d7be3aec6fc 100644
--- a/drivers/net/wireless/wl12xx/event.c
+++ b/drivers/net/wireless/wl12xx/event.c
@@ -174,6 +174,8 @@ static int wl1271_event_process(struct wl1271 *wl, struct event_mailbox *mbox)
 	u32 vector;
 	bool beacon_loss = false;
 	bool is_ap = (wl->bss_type == BSS_TYPE_AP_BSS);
+	bool disconnect_sta = false;
+	unsigned long sta_bitmap = 0;
 
 	wl1271_event_mbox_dump(mbox);
 
@@ -235,9 +237,54 @@ static int wl1271_event_process(struct wl1271 *wl, struct event_mailbox *mbox)
 			wl1271_tx_dummy_packet(wl);
 	}
 
+	/*
+	 * "TX retries exceeded" has a different meaning according to mode.
+	 * In AP mode the offending station is disconnected. In STA mode we
+	 * report connection loss.
+	 */
+	if (vector & MAX_TX_RETRY_EVENT_ID) {
+		wl1271_debug(DEBUG_EVENT, "MAX_TX_RETRY_EVENT_ID");
+		if (is_ap) {
+			sta_bitmap |= le16_to_cpu(mbox->sta_tx_retry_exceeded);
+			disconnect_sta = true;
+		} else {
+			beacon_loss = true;
+		}
+	}
+
+	if ((vector & INACTIVE_STA_EVENT_ID) && is_ap) {
+		wl1271_debug(DEBUG_EVENT, "INACTIVE_STA_EVENT_ID");
+		sta_bitmap |= le16_to_cpu(mbox->sta_aging_status);
+		disconnect_sta = true;
+	}
+
 	if (wl->vif && beacon_loss)
 		ieee80211_connection_loss(wl->vif);
 
+	if (is_ap && disconnect_sta) {
+		u32 num_packets = wl->conf.tx.max_tx_retries;
+		struct ieee80211_sta *sta;
+		const u8 *addr;
+		int h;
+
+		for (h = find_first_bit(&sta_bitmap, AP_MAX_LINKS);
+		     h < AP_MAX_LINKS;
+		     h = find_next_bit(&sta_bitmap, AP_MAX_LINKS, h+1)) {
+			if (!wl1271_is_active_sta(wl, h))
+				continue;
+
+			addr = wl->links[h].addr;
+
+			rcu_read_lock();
+			sta = ieee80211_find_sta(wl->vif, addr);
+			if (sta) {
+				wl1271_debug(DEBUG_EVENT, "remove sta %d", h);
+				ieee80211_report_low_ack(sta, num_packets);
+			}
+			rcu_read_unlock();
+		}
+	}
+
 	return 0;
 }
 
diff --git a/drivers/net/wireless/wl12xx/event.h b/drivers/net/wireless/wl12xx/event.h
index b6cf06e565a..7ae5a082124 100644
--- a/drivers/net/wireless/wl12xx/event.h
+++ b/drivers/net/wireless/wl12xx/event.h
@@ -58,13 +58,16 @@ enum {
 	CHANNEL_SWITCH_COMPLETE_EVENT_ID	 = BIT(17),
 	BSS_LOSE_EVENT_ID			 = BIT(18),
 	REGAINED_BSS_EVENT_ID			 = BIT(19),
-	ROAMING_TRIGGER_MAX_TX_RETRY_EVENT_ID	 = BIT(20),
+	MAX_TX_RETRY_EVENT_ID			 = BIT(20),
 	/* STA: dummy paket for dynamic mem blocks */
 	DUMMY_PACKET_EVENT_ID                    = BIT(21),
 	/* AP: STA remove complete */
 	STA_REMOVE_COMPLETE_EVENT_ID             = BIT(21),
 	SOFT_GEMINI_SENSE_EVENT_ID		 = BIT(22),
+	/* STA: SG prediction */
 	SOFT_GEMINI_PREDICTION_EVENT_ID		 = BIT(23),
+	/* AP: Inactive STA */
+	INACTIVE_STA_EVENT_ID			 = BIT(23),
 	SOFT_GEMINI_AVALANCHE_EVENT_ID		 = BIT(24),
 	PLT_RX_CALIBRATION_COMPLETE_EVENT_ID	 = BIT(25),
 	DBG_EVENT_ID				 = BIT(26),
@@ -119,7 +122,11 @@ struct event_mailbox {
 
 	/* AP FW only */
 	u8 hlid_removed;
+
+	/* a bitmap of hlids for stations that have been inactive too long */
 	__le16 sta_aging_status;
+
+	/* a bitmap of hlids for stations which didn't respond to TX */
 	__le16 sta_tx_retry_exceeded;
 
 	u8 reserved_5[24];
@@ -130,4 +137,7 @@ void wl1271_event_mbox_config(struct wl1271 *wl);
 int wl1271_event_handle(struct wl1271 *wl, u8 mbox);
 void wl1271_pspoll_work(struct work_struct *work);
 
+/* Functions from main.c */
+bool wl1271_is_active_sta(struct wl1271 *wl, u8 hlid);
+
 #endif
diff --git a/drivers/net/wireless/wl12xx/init.c b/drivers/net/wireless/wl12xx/init.c
index cf466074237..ab3b1e21de2 100644
--- a/drivers/net/wireless/wl12xx/init.c
+++ b/drivers/net/wireless/wl12xx/init.c
@@ -375,6 +375,10 @@ static int wl1271_sta_hw_init(struct wl1271 *wl)
 	if (ret < 0)
 		return ret;
 
+	ret = wl1271_acx_sta_max_tx_retry(wl);
+	if (ret < 0)
+		return ret;
+
 	ret = wl1271_acx_sta_mem_cfg(wl);
 	if (ret < 0)
 		return ret;
@@ -441,7 +445,7 @@ static int wl1271_ap_hw_init(struct wl1271 *wl)
 	if (ret < 0)
 		return ret;
 
-	ret = wl1271_acx_max_tx_retry(wl);
+	ret = wl1271_acx_ap_max_tx_retry(wl);
 	if (ret < 0)
 		return ret;
 
diff --git a/drivers/net/wireless/wl12xx/main.c b/drivers/net/wireless/wl12xx/main.c
index 866453bc1d1..0c69e959d0d 100644
--- a/drivers/net/wireless/wl12xx/main.c
+++ b/drivers/net/wireless/wl12xx/main.c
@@ -192,7 +192,8 @@ static struct conf_drv_settings default_conf = {
 			.long_retry_limit    = 10,
 			.aflags              = 0,
 		},
-		.ap_max_tx_retries = 100,
+		.max_tx_retries = 100,
+		.ap_aging_period = 300,
 		.tid_conf_count = 4,
 		.tid_conf = {
 			[CONF_TX_AC_BE] = {
@@ -2953,6 +2954,12 @@ static void wl1271_free_sta(struct wl1271 *wl, u8 hlid)
 	__clear_bit(hlid, (unsigned long *)&wl->ap_fw_ps_map);
 }
 
+bool wl1271_is_active_sta(struct wl1271 *wl, u8 hlid)
+{
+	int id = hlid - WL1271_AP_STA_HLID_START;
+	return test_bit(id, wl->ap_hlid_map);
+}
+
 static int wl1271_op_sta_add(struct ieee80211_hw *hw,
 			     struct ieee80211_vif *vif,
 			     struct ieee80211_sta *sta)
@@ -3535,7 +3542,6 @@ int wl1271_init_ieee80211(struct wl1271 *wl)
 		IEEE80211_HW_HAS_RATE_CONTROL |
 		IEEE80211_HW_CONNECTION_MONITOR |
 		IEEE80211_HW_SUPPORTS_CQM_RSSI |
-		IEEE80211_HW_REPORTS_TX_ACK_STATUS |
 		IEEE80211_HW_AP_LINK_PS;
 
 	wl->hw->wiphy->cipher_suites = cipher_suites;
diff --git a/drivers/net/wireless/wl12xx/wl12xx.h b/drivers/net/wireless/wl12xx/wl12xx.h
index fb2b79fa42b..7c521af58e7 100644
--- a/drivers/net/wireless/wl12xx/wl12xx.h
+++ b/drivers/net/wireless/wl12xx/wl12xx.h
@@ -172,7 +172,6 @@ extern u32 wl12xx_debug_level;
 #define WL1271_PS_STA_MAX_BLOCKS  (2 * 9)
 
 #define WL1271_AP_BSS_INDEX        0
-#define WL1271_AP_DEF_INACTIV_SEC  300
 #define WL1271_AP_DEF_BEACON_EXP   20
 
 #define ACX_TX_DESCRIPTORS         32
-- 
cgit v1.2.3-70-g09d2


From 564f59509e26355965949c677f9d6eb064a3aa0b Mon Sep 17 00:00:00 2001
From: Shahar Levi <shahar_levi@ti.com>
Date: Mon, 4 Apr 2011 10:20:39 +0300
Subject: wl12xx: Set End-of-transaction Flag at Wl127x AP Mode

End-of-transaction flag should be set when working with
wl127x chip on AP mode.

Thanks Ido Yariv <ido@wizery.com> for the guidance with that.

Signed-off-by: Shahar Levi <shahar_levi@ti.com>
Signed-off-by: Luciano Coelho <coelho@ti.com>
---
 drivers/net/wireless/wl12xx/main.c | 4 ++++
 1 file changed, 4 insertions(+)

(limited to 'drivers/net/wireless/wl12xx')

diff --git a/drivers/net/wireless/wl12xx/main.c b/drivers/net/wireless/wl12xx/main.c
index 0c69e959d0d..11497a90463 100644
--- a/drivers/net/wireless/wl12xx/main.c
+++ b/drivers/net/wireless/wl12xx/main.c
@@ -1011,6 +1011,10 @@ static int wl1271_chip_wakeup(struct wl1271 *wl)
 		wl1271_debug(DEBUG_BOOT, "chip id 0x%x (1271 PG20)",
 			     wl->chip.id);
 
+		/* end-of-transaction flag should be set in wl127x AP mode */
+		if (wl->bss_type == BSS_TYPE_AP_BSS)
+			wl->quirks |= WL12XX_QUIRK_END_OF_TRANSACTION;
+
 		ret = wl1271_setup(wl);
 		if (ret < 0)
 			goto out;
-- 
cgit v1.2.3-70-g09d2


From c75bbcdb200e2815c855e42a4685d170858af306 Mon Sep 17 00:00:00 2001
From: Eliad Peller <eliad@wizery.com>
Date: Mon, 4 Apr 2011 10:38:47 +0300
Subject: wl12xx: sleep instead of wakeup after tx work

commit d05c806 ("wl12xx: rearrange some ELP wake_up/sleep calls")
introduced a bug in which wl1271_ps_elp_wakeup() was called instead
of wl1271_ps_elp_sleep() after completing the tx work.

Reported-by: Arik Nemtsov <arik@wizery.com>
Signed-off-by: Eliad Peller <eliad@wizery.com>
Signed-off-by: Luciano Coelho <coelho@ti.com>
---
 drivers/net/wireless/wl12xx/tx.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'drivers/net/wireless/wl12xx')

diff --git a/drivers/net/wireless/wl12xx/tx.c b/drivers/net/wireless/wl12xx/tx.c
index 7a3339fd341..c8366596446 100644
--- a/drivers/net/wireless/wl12xx/tx.c
+++ b/drivers/net/wireless/wl12xx/tx.c
@@ -630,7 +630,7 @@ void wl1271_tx_work(struct work_struct *work)
 
 	wl1271_tx_work_locked(wl);
 
-	wl1271_ps_elp_wakeup(wl);
+	wl1271_ps_elp_sleep(wl);
 out:
 	mutex_unlock(&wl->mutex);
 }
-- 
cgit v1.2.3-70-g09d2


From a665d6e260f0233aac73f74d15bb6a029cc5ec47 Mon Sep 17 00:00:00 2001
From: Eliad Peller <eliad@wizery.com>
Date: Sun, 3 Apr 2011 02:01:59 +0300
Subject: wl12xx: avoid premature elp entrance

The elp_work is being enqueued on wl1271_ps_elp_sleep, but doesn't get
cancelled on wl1271_ps_elp_wakeup. This might cause immediate entrance
to elp when the wl->mutex is being released, rather than using the delayed
enqueueing optimization.

Cancel elp_work on wakeup request, and add a new WL1271_FLAG_ELP_REQUESTED
flag to further synchronize the elp actions.

[Fixed a couple of typos in some comments -- Luca]

Signed-off-by: Eliad Peller <eliad@wizery.com>
Signed-off-by: Luciano Coelho <coelho@ti.com>
---
 drivers/net/wireless/wl12xx/ps.c     | 30 ++++++++++++++++++++++++------
 drivers/net/wireless/wl12xx/wl12xx.h |  1 +
 2 files changed, 25 insertions(+), 6 deletions(-)

(limited to 'drivers/net/wireless/wl12xx')

diff --git a/drivers/net/wireless/wl12xx/ps.c b/drivers/net/wireless/wl12xx/ps.c
index b8deada5d02..b59b67711a1 100644
--- a/drivers/net/wireless/wl12xx/ps.c
+++ b/drivers/net/wireless/wl12xx/ps.c
@@ -43,6 +43,10 @@ void wl1271_elp_work(struct work_struct *work)
 	if (unlikely(wl->state == WL1271_STATE_OFF))
 		goto out;
 
+	/* our work might have been already cancelled */
+	if (unlikely(!test_bit(WL1271_FLAG_ELP_REQUESTED, &wl->flags)))
+		goto out;
+
 	if (test_bit(WL1271_FLAG_IN_ELP, &wl->flags) ||
 	    (!test_bit(WL1271_FLAG_PSM, &wl->flags) &&
 	     !test_bit(WL1271_FLAG_IDLE, &wl->flags)))
@@ -61,12 +65,16 @@ out:
 /* Routines to toggle sleep mode while in ELP */
 void wl1271_ps_elp_sleep(struct wl1271 *wl)
 {
-	if (test_bit(WL1271_FLAG_PSM, &wl->flags) ||
-	    test_bit(WL1271_FLAG_IDLE, &wl->flags)) {
-		cancel_delayed_work(&wl->elp_work);
-		ieee80211_queue_delayed_work(wl->hw, &wl->elp_work,
-					     msecs_to_jiffies(ELP_ENTRY_DELAY));
-	}
+	/* we shouldn't get consecutive sleep requests */
+	if (WARN_ON(test_and_set_bit(WL1271_FLAG_ELP_REQUESTED, &wl->flags)))
+		return;
+
+	if (!test_bit(WL1271_FLAG_PSM, &wl->flags) &&
+	    !test_bit(WL1271_FLAG_IDLE, &wl->flags))
+		return;
+
+	ieee80211_queue_delayed_work(wl->hw, &wl->elp_work,
+				     msecs_to_jiffies(ELP_ENTRY_DELAY));
 }
 
 int wl1271_ps_elp_wakeup(struct wl1271 *wl)
@@ -77,6 +85,16 @@ int wl1271_ps_elp_wakeup(struct wl1271 *wl)
 	u32 start_time = jiffies;
 	bool pending = false;
 
+	/*
+	 * we might try to wake up even if we didn't go to sleep
+	 * before (e.g. on boot)
+	 */
+	if (!test_and_clear_bit(WL1271_FLAG_ELP_REQUESTED, &wl->flags))
+		return 0;
+
+	/* don't cancel_sync as it might contend for a mutex and deadlock */
+	cancel_delayed_work(&wl->elp_work);
+
 	if (!test_bit(WL1271_FLAG_IN_ELP, &wl->flags))
 		return 0;
 
diff --git a/drivers/net/wireless/wl12xx/wl12xx.h b/drivers/net/wireless/wl12xx/wl12xx.h
index 7c521af58e7..f3de96212b9 100644
--- a/drivers/net/wireless/wl12xx/wl12xx.h
+++ b/drivers/net/wireless/wl12xx/wl12xx.h
@@ -345,6 +345,7 @@ enum wl12xx_flags {
 	WL1271_FLAG_TX_QUEUE_STOPPED,
 	WL1271_FLAG_TX_PENDING,
 	WL1271_FLAG_IN_ELP,
+	WL1271_FLAG_ELP_REQUESTED,
 	WL1271_FLAG_PSM,
 	WL1271_FLAG_PSM_REQUESTED,
 	WL1271_FLAG_IRQ_RUNNING,
-- 
cgit v1.2.3-70-g09d2


From b03acadea4f46884aa3c3e4d3a6ce03d283525e6 Mon Sep 17 00:00:00 2001
From: Shahar Levi <shahar_levi@ti.com>
Date: Sun, 3 Apr 2011 13:54:54 +0300
Subject: wl12xx: Set correct REF CLK and TCXO CLK values to the FW

Fix mismatch between the REF CLK and TCXO CLK information that is
set in the platform data and the NVS, so we override what comes
from the NVS and replace it with what comes from the platform data.

[Small fix in a comment -- Luca]

Signed-off-by: Shahar Levi <shahar_levi@ti.com>
Signed-off-by: Luciano Coelho <coelho@ti.com>
---
 drivers/net/wireless/wl12xx/cmd.c | 7 +++++++
 1 file changed, 7 insertions(+)

(limited to 'drivers/net/wireless/wl12xx')

diff --git a/drivers/net/wireless/wl12xx/cmd.c b/drivers/net/wireless/wl12xx/cmd.c
index d48331682e7..a9ffdd86f9b 100644
--- a/drivers/net/wireless/wl12xx/cmd.c
+++ b/drivers/net/wireless/wl12xx/cmd.c
@@ -129,6 +129,9 @@ int wl1271_cmd_general_parms(struct wl1271 *wl)
 	if (gp->tx_bip_fem_auto_detect)
 		answer = true;
 
+	/* Override the REF CLK from the NVS with the one from platform data */
+	gen_parms->general_params.ref_clock = wl->ref_clock;
+
 	ret = wl1271_cmd_test(wl, gen_parms, sizeof(*gen_parms), answer);
 	if (ret < 0) {
 		wl1271_warning("CMD_INI_FILE_GENERAL_PARAM failed");
@@ -168,6 +171,10 @@ int wl128x_cmd_general_parms(struct wl1271 *wl)
 	if (gp->tx_bip_fem_auto_detect)
 		answer = true;
 
+	/* Replace REF and TCXO CLKs with the ones from platform data */
+	gen_parms->general_params.ref_clock = wl->ref_clock;
+	gen_parms->general_params.tcxo_ref_clock = wl->tcxo_clock;
+
 	ret = wl1271_cmd_test(wl, gen_parms, sizeof(*gen_parms), answer);
 	if (ret < 0) {
 		wl1271_warning("CMD_INI_FILE_GENERAL_PARAM failed");
-- 
cgit v1.2.3-70-g09d2


From a20a5b7e48e24c1bf9c10ba27cb1862f8f777d00 Mon Sep 17 00:00:00 2001
From: Eliad Peller <eliad@wizery.com>
Date: Tue, 5 Apr 2011 18:21:31 +0300
Subject: wl12xx: print actual rx packet size (without padding)

When debugging, reduce the padding size from each rx packet, to
get the actual packet size (so comparing it against a cap file
will be easier)

Signed-off-by: Eliad Peller <eliad@wizery.com>
Signed-off-by: Luciano Coelho <coelho@ti.com>
---
 drivers/net/wireless/wl12xx/rx.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

(limited to 'drivers/net/wireless/wl12xx')

diff --git a/drivers/net/wireless/wl12xx/rx.c b/drivers/net/wireless/wl12xx/rx.c
index 2a581495d5c..faf5a1d3c2c 100644
--- a/drivers/net/wireless/wl12xx/rx.c
+++ b/drivers/net/wireless/wl12xx/rx.c
@@ -121,7 +121,8 @@ static int wl1271_rx_handle_data(struct wl1271 *wl, u8 *data, u32 length)
 
 	wl1271_rx_status(wl, desc, IEEE80211_SKB_RXCB(skb), beacon);
 
-	wl1271_debug(DEBUG_RX, "rx skb 0x%p: %d B %s", skb, skb->len,
+	wl1271_debug(DEBUG_RX, "rx skb 0x%p: %d B %s", skb,
+		     skb->len - desc->pad_len,
 		     beacon ? "beacon" : "");
 
 	skb_trim(skb, skb->len - desc->pad_len);
-- 
cgit v1.2.3-70-g09d2


From 30df14d0d35dd166d50b8ea80d5f0b7ef1edb6da Mon Sep 17 00:00:00 2001
From: Eliad Peller <eliad@wizery.com>
Date: Tue, 5 Apr 2011 19:13:28 +0300
Subject: wl12xx: avoid redundant join on interface reconfiguration

ieee80211_reconfig() sets most of the "changed" flags regardless
of the actual change (e.g. BSS_CHANGED_ASSOC will be set even if
the interface is still not associated). in this case the driver
will issue some unneeded commands.

Since the driver relies solely on the BSS_CHANGED_ASSOC flag,
without checking if there was an actual change, it will end up
issuing unjoin() and dummy_join() commands, although it was
never associated and should just remain idle.

Avoid it by checking the actual state change, in addition to the
"changed" flag.

(there seem to be more redundant configuration commands being
issued, but they shouldn't harm)

Signed-off-by: Eliad Peller <eliad@wizery.com>
Signed-off-by: Luciano Coelho <coelho@ti.com>
---
 drivers/net/wireless/wl12xx/main.c | 10 +++++++---
 1 file changed, 7 insertions(+), 3 deletions(-)

(limited to 'drivers/net/wireless/wl12xx')

diff --git a/drivers/net/wireless/wl12xx/main.c b/drivers/net/wireless/wl12xx/main.c
index 11497a90463..1dd735cc38b 100644
--- a/drivers/net/wireless/wl12xx/main.c
+++ b/drivers/net/wireless/wl12xx/main.c
@@ -2698,8 +2698,10 @@ static void wl1271_bss_info_changed_sta(struct wl1271 *wl,
 			}
 		} else {
 			/* use defaults when not associated */
+			bool was_assoc =
+			    !!test_and_clear_bit(WL1271_FLAG_STA_ASSOCIATED,
+						 &wl->flags);
 			clear_bit(WL1271_FLAG_STA_STATE_SENT, &wl->flags);
-			clear_bit(WL1271_FLAG_STA_ASSOCIATED, &wl->flags);
 			wl->aid = 0;
 
 			/* free probe-request template */
@@ -2725,8 +2727,10 @@ static void wl1271_bss_info_changed_sta(struct wl1271 *wl,
 				goto out;
 
 			/* restore the bssid filter and go to dummy bssid */
-			wl1271_unjoin(wl);
-			wl1271_dummy_join(wl);
+			if (was_assoc) {
+				wl1271_unjoin(wl);
+				wl1271_dummy_join(wl);
+			}
 		}
 	}
 
-- 
cgit v1.2.3-70-g09d2


From cb5ae0530e0e2af86d128ce758645b6b4a9132e1 Mon Sep 17 00:00:00 2001
From: Eliad Peller <eliad@wizery.com>
Date: Thu, 7 Apr 2011 15:52:05 +0300
Subject: wl12xx: configure rates when working in ibss mode

When working in ibss mode, we don't configure rate policy per station
(as we use the same link for multiple stations), so currently the
1mb/s rate is being used.

Instead, configure the firmware to use the whole 11b rates by default.

Signed-off-by: Eliad Peller <eliad@wizery.com>
Signed-off-by: Luciano Coelho <coelho@ti.com>
---
 drivers/net/wireless/wl12xx/conf.h |  7 +++++++
 drivers/net/wireless/wl12xx/main.c | 18 ++++++++++++++++++
 2 files changed, 25 insertions(+)

(limited to 'drivers/net/wireless/wl12xx')

diff --git a/drivers/net/wireless/wl12xx/conf.h b/drivers/net/wireless/wl12xx/conf.h
index d16094f2604..5551d9d4016 100644
--- a/drivers/net/wireless/wl12xx/conf.h
+++ b/drivers/net/wireless/wl12xx/conf.h
@@ -516,6 +516,13 @@ struct conf_rx_settings {
 #define CONF_TX_AP_DEFAULT_MGMT_RATES  (CONF_HW_BIT_RATE_1MBPS | \
 	CONF_HW_BIT_RATE_2MBPS | CONF_HW_BIT_RATE_5_5MBPS)
 
+/*
+ * Default rates for working as IBSS. use 11b rates
+ */
+#define CONF_TX_IBSS_DEFAULT_RATES  (CONF_HW_BIT_RATE_1MBPS |       \
+		CONF_HW_BIT_RATE_2MBPS | CONF_HW_BIT_RATE_5_5MBPS | \
+		CONF_HW_BIT_RATE_11MBPS);
+
 struct conf_tx_rate_class {
 
 	/*
diff --git a/drivers/net/wireless/wl12xx/main.c b/drivers/net/wireless/wl12xx/main.c
index 1dd735cc38b..53a8e2357cc 100644
--- a/drivers/net/wireless/wl12xx/main.c
+++ b/drivers/net/wireless/wl12xx/main.c
@@ -2509,6 +2509,24 @@ static void wl1271_bss_info_changed_ap(struct wl1271 *wl,
 		}
 	}
 
+	if (changed & BSS_CHANGED_IBSS) {
+		wl1271_debug(DEBUG_ADHOC, "ibss_joined: %d",
+			     bss_conf->ibss_joined);
+
+		if (bss_conf->ibss_joined) {
+			u32 rates = bss_conf->basic_rates;
+			wl->basic_rate_set = wl1271_tx_enabled_rates_get(wl,
+									 rates);
+			wl->basic_rate = wl1271_tx_min_rate_get(wl);
+
+			/* by default, use 11b rates */
+			wl->rate_set = CONF_TX_IBSS_DEFAULT_RATES;
+			ret = wl1271_acx_sta_rate_policies(wl);
+			if (ret < 0)
+				goto out;
+		}
+	}
+
 	ret = wl1271_bss_erp_info_changed(wl, bss_conf, changed);
 	if (ret < 0)
 		goto out;
-- 
cgit v1.2.3-70-g09d2


From ff86843dfbb368766d0aecd0147821d9a2b60edb Mon Sep 17 00:00:00 2001
From: Shahar Levi <shahar_levi@ti.com>
Date: Mon, 11 Apr 2011 15:41:46 +0300
Subject: wl12xx: FM WLAN coexistence

Add support to FM WLAN coexistence (STA only).  Some WiFi harmonics
may interfere with FM operation, to avoid this problem special
coexistence techniques are activated around some FM frequencies.

Signed-off-by: Shahar Levi <shahar_levi@ti.com>
Signed-off-by: Luciano Coelho <coelho@ti.com>
---
 drivers/net/wireless/wl12xx/acx.c  | 40 +++++++++++++++++++++++++
 drivers/net/wireless/wl12xx/acx.h  | 61 ++++++++++++++++++++++++++++++++++++++
 drivers/net/wireless/wl12xx/conf.h | 14 +++++++++
 drivers/net/wireless/wl12xx/init.c |  5 ++++
 drivers/net/wireless/wl12xx/main.c | 17 +++++++++++
 5 files changed, 137 insertions(+)

(limited to 'drivers/net/wireless/wl12xx')

diff --git a/drivers/net/wireless/wl12xx/acx.c b/drivers/net/wireless/wl12xx/acx.c
index a5c9c0aff83..8a39d1e40a6 100644
--- a/drivers/net/wireless/wl12xx/acx.c
+++ b/drivers/net/wireless/wl12xx/acx.c
@@ -1626,3 +1626,43 @@ out:
 	kfree(acx);
 	return ret;
 }
+
+int wl1271_acx_fm_coex(struct wl1271 *wl)
+{
+	struct wl1271_acx_fm_coex *acx;
+	int ret;
+
+	wl1271_debug(DEBUG_ACX, "acx fm coex setting");
+
+	acx = kzalloc(sizeof(*acx), GFP_KERNEL);
+	if (!acx) {
+		ret = -ENOMEM;
+		goto out;
+	}
+
+	acx->enable = wl->conf.fm_coex.enable;
+	acx->swallow_period = wl->conf.fm_coex.swallow_period;
+	acx->n_divider_fref_set_1 = wl->conf.fm_coex.n_divider_fref_set_1;
+	acx->n_divider_fref_set_2 = wl->conf.fm_coex.n_divider_fref_set_2;
+	acx->m_divider_fref_set_1 =
+		cpu_to_le16(wl->conf.fm_coex.m_divider_fref_set_1);
+	acx->m_divider_fref_set_2 =
+		cpu_to_le16(wl->conf.fm_coex.m_divider_fref_set_2);
+	acx->coex_pll_stabilization_time =
+		cpu_to_le32(wl->conf.fm_coex.coex_pll_stabilization_time);
+	acx->ldo_stabilization_time =
+		cpu_to_le16(wl->conf.fm_coex.ldo_stabilization_time);
+	acx->fm_disturbed_band_margin =
+		wl->conf.fm_coex.fm_disturbed_band_margin;
+	acx->swallow_clk_diff = wl->conf.fm_coex.swallow_clk_diff;
+
+	ret = wl1271_cmd_configure(wl, ACX_FM_COEX_CFG, acx, sizeof(*acx));
+	if (ret < 0) {
+		wl1271_warning("acx fm coex setting failed: %d", ret);
+		goto out;
+	}
+
+out:
+	kfree(acx);
+	return ret;
+}
diff --git a/drivers/net/wireless/wl12xx/acx.h b/drivers/net/wireless/wl12xx/acx.h
index 942908cd53a..2dde0346e95 100644
--- a/drivers/net/wireless/wl12xx/acx.h
+++ b/drivers/net/wireless/wl12xx/acx.h
@@ -1179,6 +1179,65 @@ struct wl1271_acx_inconnection_sta {
 	u8 padding1[2];
 } __packed;
 
+/*
+ * ACX_FM_COEX_CFG
+ * set the FM co-existence parameters.
+ */
+struct wl1271_acx_fm_coex {
+	struct acx_header header;
+	/* enable(1) / disable(0) the FM Coex feature */
+	u8 enable;
+	/*
+	 * Swallow period used in COEX PLL swallowing mechanism.
+	 * 0xFF = use FW default
+	 */
+	u8 swallow_period;
+	/*
+	 * The N divider used in COEX PLL swallowing mechanism for Fref of
+	 * 38.4/19.2 Mhz. 0xFF = use FW default
+	 */
+	u8 n_divider_fref_set_1;
+	/*
+	 * The N divider used in COEX PLL swallowing mechanism for Fref of
+	 * 26/52 Mhz. 0xFF = use FW default
+	 */
+	u8 n_divider_fref_set_2;
+	/*
+	 * The M divider used in COEX PLL swallowing mechanism for Fref of
+	 * 38.4/19.2 Mhz. 0xFFFF = use FW default
+	 */
+	__le16 m_divider_fref_set_1;
+	/*
+	 * The M divider used in COEX PLL swallowing mechanism for Fref of
+	 * 26/52 Mhz. 0xFFFF = use FW default
+	 */
+	__le16 m_divider_fref_set_2;
+	/*
+	 * The time duration in uSec required for COEX PLL to stabilize.
+	 * 0xFFFFFFFF = use FW default
+	 */
+	__le32 coex_pll_stabilization_time;
+	/*
+	 * The time duration in uSec required for LDO to stabilize.
+	 * 0xFFFFFFFF = use FW default
+	 */
+	__le16 ldo_stabilization_time;
+	/*
+	 * The disturbed frequency band margin around the disturbed frequency
+	 * center (single sided).
+	 * For example, if 2 is configured, the following channels will be
+	 * considered disturbed channel:
+	 *   80 +- 0.1 MHz, 91 +- 0.1 MHz, 98 +- 0.1 MHz, 102 +- 0.1 MH
+	 * 0xFF = use FW default
+	 */
+	u8 fm_disturbed_band_margin;
+	/*
+	 * The swallow clock difference of the swallowing mechanism.
+	 * 0xFF = use FW default
+	 */
+	u8 swallow_clk_diff;
+} __packed;
+
 enum {
 	ACX_WAKE_UP_CONDITIONS      = 0x0002,
 	ACX_MEM_CFG                 = 0x0003,
@@ -1208,6 +1267,7 @@ enum {
 	ACX_BCN_DTIM_OPTIONS        = 0x0031,
 	ACX_SG_ENABLE               = 0x0032,
 	ACX_SG_CFG                  = 0x0033,
+	ACX_FM_COEX_CFG             = 0x0034,
 	ACX_BEACON_FILTER_TABLE     = 0x0038,
 	ACX_ARP_IP_FILTER           = 0x0039,
 	ACX_ROAMING_STATISTICS_TBL  = 0x003B,
@@ -1318,5 +1378,6 @@ int wl1271_acx_ap_max_tx_retry(struct wl1271 *wl);
 int wl1271_acx_sta_max_tx_retry(struct wl1271 *wl);
 int wl1271_acx_config_ps(struct wl1271 *wl);
 int wl1271_acx_set_inconnection_sta(struct wl1271 *wl, u8 *addr);
+int wl1271_acx_fm_coex(struct wl1271 *wl);
 
 #endif /* __WL1271_ACX_H__ */
diff --git a/drivers/net/wireless/wl12xx/conf.h b/drivers/net/wireless/wl12xx/conf.h
index 5551d9d4016..a4e0acff867 100644
--- a/drivers/net/wireless/wl12xx/conf.h
+++ b/drivers/net/wireless/wl12xx/conf.h
@@ -1199,6 +1199,19 @@ struct conf_memory_settings {
 	u8 tx_min;
 };
 
+struct conf_fm_coex {
+	u8 enable;
+	u8 swallow_period;
+	u8 n_divider_fref_set_1;
+	u8 n_divider_fref_set_2;
+	u16 m_divider_fref_set_1;
+	u16 m_divider_fref_set_2;
+	u32 coex_pll_stabilization_time;
+	u16 ldo_stabilization_time;
+	u8 fm_disturbed_band_margin;
+	u8 swallow_clk_diff;
+};
+
 struct conf_drv_settings {
 	struct conf_sg_settings sg;
 	struct conf_rx_settings rx;
@@ -1212,6 +1225,7 @@ struct conf_drv_settings {
 	struct conf_ht_setting ht;
 	struct conf_memory_settings mem_wl127x;
 	struct conf_memory_settings mem_wl128x;
+	struct conf_fm_coex fm_coex;
 	u8 hci_io_ds;
 };
 
diff --git a/drivers/net/wireless/wl12xx/init.c b/drivers/net/wireless/wl12xx/init.c
index ab3b1e21de2..46fd7212b23 100644
--- a/drivers/net/wireless/wl12xx/init.c
+++ b/drivers/net/wireless/wl12xx/init.c
@@ -356,6 +356,11 @@ static int wl1271_sta_hw_init(struct wl1271 *wl)
 	if (ret < 0)
 		return ret;
 
+	/* FM WLAN coexistence */
+	ret = wl1271_acx_fm_coex(wl);
+	if (ret < 0)
+		return ret;
+
 	/* Beacons and broadcast settings */
 	ret = wl1271_init_beacon_broadcast(wl);
 	if (ret < 0)
diff --git a/drivers/net/wireless/wl12xx/main.c b/drivers/net/wireless/wl12xx/main.c
index 53a8e2357cc..8a7a8c5fcf5 100644
--- a/drivers/net/wireless/wl12xx/main.c
+++ b/drivers/net/wireless/wl12xx/main.c
@@ -320,6 +320,18 @@ static struct conf_drv_settings default_conf = {
 		.min_req_rx_blocks            = 22,
 		.tx_min                       = 27,
 	},
+	.fm_coex = {
+		.enable                       = true,
+		.swallow_period               = 5,
+		.n_divider_fref_set_1         = 0xff,       /* default */
+		.n_divider_fref_set_2         = 12,
+		.m_divider_fref_set_1         = 148,
+		.m_divider_fref_set_2         = 0xffff,     /* default */
+		.coex_pll_stabilization_time  = 0xffffffff, /* default */
+		.ldo_stabilization_time       = 0xffff,     /* default */
+		.fm_disturbed_band_margin     = 0xff,       /* default */
+		.swallow_clk_diff             = 0xff,       /* default */
+	},
 	.hci_io_ds = HCI_IO_DS_6MA,
 };
 
@@ -508,6 +520,11 @@ static int wl1271_plt_init(struct wl1271 *wl)
 	if (ret < 0)
 		goto out_free_memmap;
 
+	/* FM WLAN coexistence */
+	ret = wl1271_acx_fm_coex(wl);
+	if (ret < 0)
+		goto out_free_memmap;
+
 	/* Energy detection */
 	ret = wl1271_init_energy_detection(wl);
 	if (ret < 0)
-- 
cgit v1.2.3-70-g09d2


From 2370841bf1a735661db3d3ae63385be3475b7452 Mon Sep 17 00:00:00 2001
From: Shahar Levi <shahar_levi@ti.com>
Date: Wed, 13 Apr 2011 14:52:50 +0300
Subject: wl12xx: Update Power Save Exit Retries Packets

Reducing the retries of sending PS exit packets to the peer AP.
That fix is to avoid sending unrealizable number of PS exit packets
in case of ap lost.

Signed-off-by: Shahar Levi <shahar_levi@ti.com>
Signed-off-by: Luciano Coelho <coelho@ti.com>
---
 drivers/net/wireless/wl12xx/main.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'drivers/net/wireless/wl12xx')

diff --git a/drivers/net/wireless/wl12xx/main.c b/drivers/net/wireless/wl12xx/main.c
index 8a7a8c5fcf5..c0cfcc7e11a 100644
--- a/drivers/net/wireless/wl12xx/main.c
+++ b/drivers/net/wireless/wl12xx/main.c
@@ -258,7 +258,7 @@ static struct conf_drv_settings default_conf = {
 		.bet_enable                  = CONF_BET_MODE_ENABLE,
 		.bet_max_consecutive         = 50,
 		.psm_entry_retries           = 5,
-		.psm_exit_retries            = 255,
+		.psm_exit_retries            = 16,
 		.psm_entry_nullfunc_retries  = 3,
 		.psm_entry_hangover_period   = 1,
 		.keep_alive_interval         = 55000,
-- 
cgit v1.2.3-70-g09d2


From 1fe9e2464c667903d7eec0314db26c462ca9d276 Mon Sep 17 00:00:00 2001
From: Eliad Peller <eliad@wizery.com>
Date: Sun, 17 Apr 2011 11:20:47 +0300
Subject: wl12xx: add debugfs entries for dtim_interval and beacon_interval

When configuring ACX_WAKE_UP_CONDITIONS (before entering psm), we
tell the firmware to wake up once in N DTIMs/beacons.

Allow control of this value via debugfs (for debugging purposes).

Signed-off-by: Eliad Peller <eliad@wizery.com>
Signed-off-by: Luciano Coelho <coelho@ti.com>
---
 drivers/net/wireless/wl12xx/debugfs.c | 132 ++++++++++++++++++++++++++++++++++
 1 file changed, 132 insertions(+)

(limited to 'drivers/net/wireless/wl12xx')

diff --git a/drivers/net/wireless/wl12xx/debugfs.c b/drivers/net/wireless/wl12xx/debugfs.c
index 70ab1986788..88c6efe33ec 100644
--- a/drivers/net/wireless/wl12xx/debugfs.c
+++ b/drivers/net/wireless/wl12xx/debugfs.c
@@ -291,6 +291,136 @@ static const struct file_operations gpio_power_ops = {
 	.llseek = default_llseek,
 };
 
+static ssize_t dtim_interval_read(struct file *file, char __user *user_buf,
+				  size_t count, loff_t *ppos)
+{
+	struct wl1271 *wl = file->private_data;
+	u8 value;
+
+	if (wl->conf.conn.wake_up_event == CONF_WAKE_UP_EVENT_DTIM ||
+	    wl->conf.conn.wake_up_event == CONF_WAKE_UP_EVENT_N_DTIM)
+		value = wl->conf.conn.listen_interval;
+	else
+		value = 0;
+
+	return wl1271_format_buffer(user_buf, count, ppos, "%d\n", value);
+}
+
+static ssize_t dtim_interval_write(struct file *file,
+				   const char __user *user_buf,
+				   size_t count, loff_t *ppos)
+{
+	struct wl1271 *wl = file->private_data;
+	char buf[10];
+	size_t len;
+	unsigned long value;
+	int ret;
+
+	len = min(count, sizeof(buf) - 1);
+	if (copy_from_user(buf, user_buf, len))
+		return -EFAULT;
+	buf[len] = '\0';
+
+	ret = strict_strtoul(buf, 0, &value);
+	if (ret < 0) {
+		wl1271_warning("illegal value for dtim_interval");
+		return -EINVAL;
+	}
+
+	if (value < 1 || value > 10) {
+		wl1271_warning("dtim value is not in valid range");
+		return -ERANGE;
+	}
+
+	mutex_lock(&wl->mutex);
+
+	wl->conf.conn.listen_interval = value;
+	/* for some reason there are different event types for 1 and >1 */
+	if (value == 1)
+		wl->conf.conn.wake_up_event = CONF_WAKE_UP_EVENT_DTIM;
+	else
+		wl->conf.conn.wake_up_event = CONF_WAKE_UP_EVENT_N_DTIM;
+
+	/*
+	 * we don't reconfigure ACX_WAKE_UP_CONDITIONS now, so it will only
+	 * take effect on the next time we enter psm.
+	 */
+	mutex_unlock(&wl->mutex);
+	return count;
+}
+
+static const struct file_operations dtim_interval_ops = {
+	.read = dtim_interval_read,
+	.write = dtim_interval_write,
+	.open = wl1271_open_file_generic,
+	.llseek = default_llseek,
+};
+
+static ssize_t beacon_interval_read(struct file *file, char __user *user_buf,
+				    size_t count, loff_t *ppos)
+{
+	struct wl1271 *wl = file->private_data;
+	u8 value;
+
+	if (wl->conf.conn.wake_up_event == CONF_WAKE_UP_EVENT_BEACON ||
+	    wl->conf.conn.wake_up_event == CONF_WAKE_UP_EVENT_N_BEACONS)
+		value = wl->conf.conn.listen_interval;
+	else
+		value = 0;
+
+	return wl1271_format_buffer(user_buf, count, ppos, "%d\n", value);
+}
+
+static ssize_t beacon_interval_write(struct file *file,
+				     const char __user *user_buf,
+				     size_t count, loff_t *ppos)
+{
+	struct wl1271 *wl = file->private_data;
+	char buf[10];
+	size_t len;
+	unsigned long value;
+	int ret;
+
+	len = min(count, sizeof(buf) - 1);
+	if (copy_from_user(buf, user_buf, len))
+		return -EFAULT;
+	buf[len] = '\0';
+
+	ret = strict_strtoul(buf, 0, &value);
+	if (ret < 0) {
+		wl1271_warning("illegal value for beacon_interval");
+		return -EINVAL;
+	}
+
+	if (value < 1 || value > 255) {
+		wl1271_warning("beacon interval value is not in valid range");
+		return -ERANGE;
+	}
+
+	mutex_lock(&wl->mutex);
+
+	wl->conf.conn.listen_interval = value;
+	/* for some reason there are different event types for 1 and >1 */
+	if (value == 1)
+		wl->conf.conn.wake_up_event = CONF_WAKE_UP_EVENT_BEACON;
+	else
+		wl->conf.conn.wake_up_event = CONF_WAKE_UP_EVENT_N_BEACONS;
+
+	/*
+	 * we don't reconfigure ACX_WAKE_UP_CONDITIONS now, so it will only
+	 * take effect on the next time we enter psm.
+	 */
+	mutex_unlock(&wl->mutex);
+	return count;
+}
+
+static const struct file_operations beacon_interval_ops = {
+	.read = beacon_interval_read,
+	.write = beacon_interval_write,
+	.open = wl1271_open_file_generic,
+	.llseek = default_llseek,
+};
+
 static int wl1271_debugfs_add_files(struct wl1271 *wl,
 				     struct dentry *rootdir)
 {
@@ -399,6 +529,8 @@ static int wl1271_debugfs_add_files(struct wl1271 *wl,
 	DEBUGFS_ADD(excessive_retries, rootdir);
 
 	DEBUGFS_ADD(gpio_power, rootdir);
+	DEBUGFS_ADD(dtim_interval, rootdir);
+	DEBUGFS_ADD(beacon_interval, rootdir);
 
 	return 0;
 
-- 
cgit v1.2.3-70-g09d2


From ae825e4ba81203e1b3d3159f24327cdc2629dbd8 Mon Sep 17 00:00:00 2001
From: Ido Yariv <ido@wizery.com>
Date: Mon, 18 Apr 2011 16:40:14 +0300
Subject: wl12xx: Modify memory configuration for 128x/AP

The 128x/AP firmware does not yet support dynamic memory. Temporarily,
the memory configuration for the 127x was used both for 127x/AP as well
as 128x/AP. Since the two chips don't have the same number of memory
blocks, TP was significantly degraded.

This hasn't been fine tuned yet, but using the base 128x numbers
(without dynamic memory) seems to yield much better results (around 30%
more). Additional fine tuning will be required in the future.

Signed-off-by: Ido Yariv <ido@wizery.com>
Signed-off-by: Luciano Coelho <coelho@ti.com>
---
 drivers/net/wireless/wl12xx/acx.c | 22 +++++++++++++++-------
 1 file changed, 15 insertions(+), 7 deletions(-)

(limited to 'drivers/net/wireless/wl12xx')

diff --git a/drivers/net/wireless/wl12xx/acx.c b/drivers/net/wireless/wl12xx/acx.c
index 8a39d1e40a6..b1b5139139e 100644
--- a/drivers/net/wireless/wl12xx/acx.c
+++ b/drivers/net/wireless/wl12xx/acx.c
@@ -954,6 +954,7 @@ out:
 int wl1271_acx_ap_mem_cfg(struct wl1271 *wl)
 {
 	struct wl1271_acx_ap_config_memory *mem_conf;
+	struct conf_memory_settings *mem;
 	int ret;
 
 	wl1271_debug(DEBUG_ACX, "wl1271 mem cfg");
@@ -964,14 +965,21 @@ int wl1271_acx_ap_mem_cfg(struct wl1271 *wl)
 		goto out;
 	}
 
+	if (wl->chip.id == CHIP_ID_1283_PG20)
+		/*
+		 * FIXME: The 128x AP FW does not yet support dynamic memory.
+		 * Use the base memory configuration for 128x for now. This
+		 * should be fine tuned in the future.
+		 */
+		mem = &wl->conf.mem_wl128x;
+	else
+		mem = &wl->conf.mem_wl127x;
+
 	/* memory config */
-	/* FIXME: for now we always use mem_wl127x for AP, because it
-	 * doesn't support dynamic memory and we don't have the
-	 * optimal values for wl128x without dynamic memory yet */
-	mem_conf->num_stations = wl->conf.mem_wl127x.num_stations;
-	mem_conf->rx_mem_block_num = wl->conf.mem_wl127x.rx_block_num;
-	mem_conf->tx_min_mem_block_num = wl->conf.mem_wl127x.tx_min_block_num;
-	mem_conf->num_ssid_profiles = wl->conf.mem_wl127x.ssid_profiles;
+	mem_conf->num_stations = mem->num_stations;
+	mem_conf->rx_mem_block_num = mem->rx_block_num;
+	mem_conf->tx_min_mem_block_num = mem->tx_min_block_num;
+	mem_conf->num_ssid_profiles = mem->ssid_profiles;
 	mem_conf->total_tx_descriptors = cpu_to_le32(ACX_TX_DESCRIPTORS);
 
 	ret = wl1271_cmd_configure(wl, ACX_MEM_CFG, mem_conf,
-- 
cgit v1.2.3-70-g09d2


From ef2e3004855e90d2919105e4a91d7df6ab9845a9 Mon Sep 17 00:00:00 2001
From: Ido Yariv <ido@wizery.com>
Date: Mon, 18 Apr 2011 16:44:11 +0300
Subject: wl12xx: Restart TX when TX descriptors are available

The driver stops sending TX packets when either there aren't enough
memory blocks, or it runs out of TX descriptors. The driver continues to
send packets to the FW only when more memory blocks are available.

The FW might free TX descriptors without freeing the corresponding
memory blocks, especially when dynamic memory is enabled. In cases where
memory blocks are not freed at all, the driver will keep waiting for
more memory blocks indefinitely.

Fix this by clearing the WL1271_FLAG_FW_TX_BUSY flag when there are
available TX descriptors.

Signed-off-by: Ido Yariv <ido@wizery.com>
Signed-off-by: Luciano Coelho <coelho@ti.com>
---
 drivers/net/wireless/wl12xx/tx.c | 3 +++
 1 file changed, 3 insertions(+)

(limited to 'drivers/net/wireless/wl12xx')

diff --git a/drivers/net/wireless/wl12xx/tx.c b/drivers/net/wireless/wl12xx/tx.c
index c8366596446..cc837bba546 100644
--- a/drivers/net/wireless/wl12xx/tx.c
+++ b/drivers/net/wireless/wl12xx/tx.c
@@ -65,6 +65,9 @@ static int wl1271_alloc_tx_id(struct wl1271 *wl, struct sk_buff *skb)
 static void wl1271_free_tx_id(struct wl1271 *wl, int id)
 {
 	if (__test_and_clear_bit(id, wl->tx_frames_map)) {
+		if (unlikely(wl->tx_frames_cnt == ACX_TX_DESCRIPTORS))
+			clear_bit(WL1271_FLAG_FW_TX_BUSY, &wl->flags);
+
 		wl->tx_frames[id] = NULL;
 		wl->tx_frames_cnt--;
 	}
-- 
cgit v1.2.3-70-g09d2


From 4cf557fcf01e352fb418e110dd013e4128493c5f Mon Sep 17 00:00:00 2001
From: Ido Yariv <ido@wizery.com>
Date: Mon, 18 Apr 2011 16:45:10 +0300
Subject: wl12xx: Enable dynamic memory for 127x

The FW can dynamically manage its internal TX & RX memory pools, moving
blocks from one pool to another when necessary. This can significantly
improve performance. Currently this feature is enabled only for 128x.

Enable dynamic memory for 127x as well. Other parameters in the memory
configuration structure may need to be fine tuned, as the optimal values
for these may change once dynamic memory is enabled.

Signed-off-by: Ido Yariv <ido@wizery.com>
Signed-off-by: Luciano Coelho <coelho@ti.com>
---
 drivers/net/wireless/wl12xx/main.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'drivers/net/wireless/wl12xx')

diff --git a/drivers/net/wireless/wl12xx/main.c b/drivers/net/wireless/wl12xx/main.c
index c0cfcc7e11a..6dd72365b63 100644
--- a/drivers/net/wireless/wl12xx/main.c
+++ b/drivers/net/wireless/wl12xx/main.c
@@ -305,7 +305,7 @@ static struct conf_drv_settings default_conf = {
 		.ssid_profiles                = 1,
 		.rx_block_num                 = 70,
 		.tx_min_block_num             = 40,
-		.dynamic_memory               = 0,
+		.dynamic_memory               = 1,
 		.min_req_tx_blocks            = 100,
 		.min_req_rx_blocks            = 22,
 		.tx_min                       = 27,
-- 
cgit v1.2.3-70-g09d2


From 33437893025aa3c0195b933ac99ef7de924019f4 Mon Sep 17 00:00:00 2001
From: Arik Nemtsov <arik@wizery.com>
Date: Tue, 26 Apr 2011 23:35:39 +0300
Subject: wl12xx: implement the tx_frames_pending mac80211 callback

Frames are considered pending when they reside in the driver TX queue or
already queued in the FW.

This notion of "pending" is appropriate for power save considerations in
STA mode, but not necessarily in other modes (for instance P2P-GO).

[Fixed a sparse warning about missing "static" in a function
declaration -- Luca]

Signed-off-by: Arik Nemtsov <arik@wizery.com>
Signed-off-by: Luciano Coelho <coelho@ti.com>
---
 drivers/net/wireless/wl12xx/main.c | 23 +++++++++++++++++++++++
 1 file changed, 23 insertions(+)

(limited to 'drivers/net/wireless/wl12xx')

diff --git a/drivers/net/wireless/wl12xx/main.c b/drivers/net/wireless/wl12xx/main.c
index 6dd72365b63..e177764e714 100644
--- a/drivers/net/wireless/wl12xx/main.c
+++ b/drivers/net/wireless/wl12xx/main.c
@@ -3147,6 +3147,28 @@ out:
 	return ret;
 }
 
+static bool wl1271_tx_frames_pending(struct ieee80211_hw *hw)
+{
+	struct wl1271 *wl = hw->priv;
+	bool ret = false;
+
+	mutex_lock(&wl->mutex);
+
+	if (unlikely(wl->state == WL1271_STATE_OFF))
+		goto out;
+
+	/* packets are considered pending if in the TX queue or the FW */
+	ret = (wl->tx_queue_count > 0) || (wl->tx_frames_cnt > 0);
+
+	/* the above is appropriate for STA mode for PS purposes */
+	WARN_ON(wl->bss_type != BSS_TYPE_STA_BSS);
+
+out:
+	mutex_unlock(&wl->mutex);
+
+	return ret;
+}
+
 /* can't be const, mac80211 writes to this */
 static struct ieee80211_rate wl1271_rates[] = {
 	{ .bitrate = 10,
@@ -3398,6 +3420,7 @@ static const struct ieee80211_ops wl1271_ops = {
 	.sta_add = wl1271_op_sta_add,
 	.sta_remove = wl1271_op_sta_remove,
 	.ampdu_action = wl1271_op_ampdu_action,
+	.tx_frames_pending = wl1271_tx_frames_pending,
 	CFG80211_TESTMODE_CMD(wl1271_tm_cmd)
 };
 
-- 
cgit v1.2.3-70-g09d2


From 34c8e3d2bb901b2920d2a8930c0de82e7fefac76 Mon Sep 17 00:00:00 2001
From: Arik Nemtsov <arik@wizery.com>
Date: Tue, 26 Apr 2011 23:35:40 +0300
Subject: wl12xx: discard corrupted packets in RX

When packets arrive with a RX descriptor indicating corruption, discard
them.

In general white-list the RX descriptor status to prevent rouge data
from being sent up.

Signed-off-by: Arik Nemtsov <arik@wizery.com>
Signed-off-by: Luciano Coelho <coelho@ti.com>
---
 drivers/net/wireless/wl12xx/rx.c | 33 ++++++++++++++++++++++++++-------
 1 file changed, 26 insertions(+), 7 deletions(-)

(limited to 'drivers/net/wireless/wl12xx')

diff --git a/drivers/net/wireless/wl12xx/rx.c b/drivers/net/wireless/wl12xx/rx.c
index faf5a1d3c2c..70091035e01 100644
--- a/drivers/net/wireless/wl12xx/rx.c
+++ b/drivers/net/wireless/wl12xx/rx.c
@@ -76,12 +76,15 @@ static void wl1271_rx_status(struct wl1271 *wl,
 						      status->band);
 
 	if (desc->flags & WL1271_RX_DESC_ENCRYPT_MASK) {
-		status->flag |= RX_FLAG_IV_STRIPPED | RX_FLAG_MMIC_STRIPPED;
+		u8 desc_err_code = desc->status & WL1271_RX_DESC_STATUS_MASK;
 
-		if (likely(!(desc->status & WL1271_RX_DESC_DECRYPT_FAIL)))
-			status->flag |= RX_FLAG_DECRYPTED;
-		if (unlikely(desc->status & WL1271_RX_DESC_MIC_FAIL))
+		status->flag |= RX_FLAG_IV_STRIPPED | RX_FLAG_MMIC_STRIPPED |
+				RX_FLAG_DECRYPTED;
+
+		if (unlikely(desc_err_code == WL1271_RX_DESC_MIC_FAIL)) {
 			status->flag |= RX_FLAG_MMIC_ERROR;
+			wl1271_warning("Michael MIC error");
+		}
 	}
 }
 
@@ -100,6 +103,25 @@ static int wl1271_rx_handle_data(struct wl1271 *wl, u8 *data, u32 length)
 	if (unlikely(wl->state == WL1271_STATE_PLT))
 		return -EINVAL;
 
+	/* the data read starts with the descriptor */
+	desc = (struct wl1271_rx_descriptor *) data;
+
+	switch (desc->status & WL1271_RX_DESC_STATUS_MASK) {
+	/* discard corrupted packets */
+	case WL1271_RX_DESC_DRIVER_RX_Q_FAIL:
+	case WL1271_RX_DESC_DECRYPT_FAIL:
+		wl1271_warning("corrupted packet in RX with status: 0x%x",
+			       desc->status & WL1271_RX_DESC_STATUS_MASK);
+		return -EINVAL;
+	case WL1271_RX_DESC_SUCCESS:
+	case WL1271_RX_DESC_MIC_FAIL:
+		break;
+	default:
+		wl1271_error("invalid RX descriptor status: 0x%x",
+			     desc->status & WL1271_RX_DESC_STATUS_MASK);
+		return -EINVAL;
+	}
+
 	skb = __dev_alloc_skb(length, GFP_KERNEL);
 	if (!skb) {
 		wl1271_error("Couldn't allocate RX frame");
@@ -109,9 +131,6 @@ static int wl1271_rx_handle_data(struct wl1271 *wl, u8 *data, u32 length)
 	buf = skb_put(skb, length);
 	memcpy(buf, data, length);
 
-	/* the data read starts with the descriptor */
-	desc = (struct wl1271_rx_descriptor *) buf;
-
 	/* now we pull the descriptor out of the buffer */
 	skb_pull(skb, sizeof(*desc));
 
-- 
cgit v1.2.3-70-g09d2


From 86c438f40cf3e0f6ce2da80f2d759e61d3e85ad7 Mon Sep 17 00:00:00 2001
From: Hauke Mehrtens <hauke@hauke-m.de>
Date: Tue, 26 Apr 2011 23:27:44 +0200
Subject: wl12xx: do not set queue_mapping directly

It is preferred to use the setter that to set queue_mapping directly.
This also helps backporting in compat-wireless.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Signed-off-by: Luciano Coelho <coelho@ti.com>
---
 drivers/net/wireless/wl12xx/main.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'drivers/net/wireless/wl12xx')

diff --git a/drivers/net/wireless/wl12xx/main.c b/drivers/net/wireless/wl12xx/main.c
index e177764e714..a8770102a74 100644
--- a/drivers/net/wireless/wl12xx/main.c
+++ b/drivers/net/wireless/wl12xx/main.c
@@ -1294,7 +1294,7 @@ static struct sk_buff *wl12xx_alloc_dummy_packet(struct wl1271 *wl)
 	skb->priority = WL1271_TID_MGMT;
 
 	/* Initialize all fields that might be used */
-	skb->queue_mapping = 0;
+	skb_set_queue_mapping(skb, 0);
 	memset(IEEE80211_SKB_CB(skb), 0, sizeof(struct ieee80211_tx_info));
 
 	return skb;
-- 
cgit v1.2.3-70-g09d2


From f7c7c7e69cbc3c5b660a32cc2cb31720b2b420c8 Mon Sep 17 00:00:00 2001
From: Luciano Coelho <coelho@ti.com>
Date: Fri, 29 Apr 2011 22:25:28 +0300
Subject: wl12xx: strict_stroul introduced converted to kstrtoul

One new patch applied added a couple of new strict_strtoul calls.
Converted those to kstroul().

Signed-off-by: Luciano Coelho <coelho@ti.com>
---
 drivers/net/wireless/wl12xx/debugfs.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

(limited to 'drivers/net/wireless/wl12xx')

diff --git a/drivers/net/wireless/wl12xx/debugfs.c b/drivers/net/wireless/wl12xx/debugfs.c
index 88c6efe33ec..b17cff6cd75 100644
--- a/drivers/net/wireless/wl12xx/debugfs.c
+++ b/drivers/net/wireless/wl12xx/debugfs.c
@@ -321,7 +321,7 @@ static ssize_t dtim_interval_write(struct file *file,
 		return -EFAULT;
 	buf[len] = '\0';
 
-	ret = strict_strtoul(buf, 0, &value);
+	ret = kstrtoul(buf, 0, &value);
 	if (ret < 0) {
 		wl1271_warning("illegal value for dtim_interval");
 		return -EINVAL;
@@ -386,7 +386,7 @@ static ssize_t beacon_interval_write(struct file *file,
 		return -EFAULT;
 	buf[len] = '\0';
 
-	ret = strict_strtoul(buf, 0, &value);
+	ret = kstrtoul(buf, 0, &value);
 	if (ret < 0) {
 		wl1271_warning("illegal value for beacon_interval");
 		return -EINVAL;
-- 
cgit v1.2.3-70-g09d2


From 801f870bc0524bad7ebef9cea52d20e4d4992e4a Mon Sep 17 00:00:00 2001
From: Arik Nemtsov <arik@wizery.com>
Date: Mon, 18 Apr 2011 14:15:20 +0300
Subject: wl12xx: add BT-coexistance for AP

Initialize AP specific BT coexitance parameters to default values and
enable them in AP mode.

Signed-off-by: Arik Nemtsov <arik@wizery.com>
Signed-off-by: Luciano Coelho <coelho@ti.com>
---
 drivers/net/wireless/wl12xx/acx.c  | 40 ++++++++++++++++++++++----
 drivers/net/wireless/wl12xx/acx.h  | 16 +++++++++--
 drivers/net/wireless/wl12xx/conf.h | 35 +++++++++++++++++++++--
 drivers/net/wireless/wl12xx/init.c | 15 ++++++----
 drivers/net/wireless/wl12xx/main.c | 57 +++++++++++++++++++++++++++++++++++++-
 5 files changed, 146 insertions(+), 17 deletions(-)

(limited to 'drivers/net/wireless/wl12xx')

diff --git a/drivers/net/wireless/wl12xx/acx.c b/drivers/net/wireless/wl12xx/acx.c
index b1b5139139e..2b5fb3d2df1 100644
--- a/drivers/net/wireless/wl12xx/acx.c
+++ b/drivers/net/wireless/wl12xx/acx.c
@@ -540,13 +540,13 @@ out:
 	return ret;
 }
 
-int wl1271_acx_sg_cfg(struct wl1271 *wl)
+int wl1271_acx_sta_sg_cfg(struct wl1271 *wl)
 {
-	struct acx_bt_wlan_coex_param *param;
+	struct acx_sta_bt_wlan_coex_param *param;
 	struct conf_sg_settings *c = &wl->conf.sg;
 	int i, ret;
 
-	wl1271_debug(DEBUG_ACX, "acx sg cfg");
+	wl1271_debug(DEBUG_ACX, "acx sg sta cfg");
 
 	param = kzalloc(sizeof(*param), GFP_KERNEL);
 	if (!param) {
@@ -555,8 +555,38 @@ int wl1271_acx_sg_cfg(struct wl1271 *wl)
 	}
 
 	/* BT-WLAN coext parameters */
-	for (i = 0; i < CONF_SG_PARAMS_MAX; i++)
-		param->params[i] = cpu_to_le32(c->params[i]);
+	for (i = 0; i < CONF_SG_STA_PARAMS_MAX; i++)
+		param->params[i] = cpu_to_le32(c->sta_params[i]);
+	param->param_idx = CONF_SG_PARAMS_ALL;
+
+	ret = wl1271_cmd_configure(wl, ACX_SG_CFG, param, sizeof(*param));
+	if (ret < 0) {
+		wl1271_warning("failed to set sg config: %d", ret);
+		goto out;
+	}
+
+out:
+	kfree(param);
+	return ret;
+}
+
+int wl1271_acx_ap_sg_cfg(struct wl1271 *wl)
+{
+	struct acx_ap_bt_wlan_coex_param *param;
+	struct conf_sg_settings *c = &wl->conf.sg;
+	int i, ret;
+
+	wl1271_debug(DEBUG_ACX, "acx sg ap cfg");
+
+	param = kzalloc(sizeof(*param), GFP_KERNEL);
+	if (!param) {
+		ret = -ENOMEM;
+		goto out;
+	}
+
+	/* BT-WLAN coext parameters */
+	for (i = 0; i < CONF_SG_AP_PARAMS_MAX; i++)
+		param->params[i] = cpu_to_le32(c->ap_params[i]);
 	param->param_idx = CONF_SG_PARAMS_ALL;
 
 	ret = wl1271_cmd_configure(wl, ACX_SG_CFG, param, sizeof(*param));
diff --git a/drivers/net/wireless/wl12xx/acx.h b/drivers/net/wireless/wl12xx/acx.h
index 2dde0346e95..cd7548dacd5 100644
--- a/drivers/net/wireless/wl12xx/acx.h
+++ b/drivers/net/wireless/wl12xx/acx.h
@@ -370,14 +370,23 @@ struct acx_bt_wlan_coex {
 	u8 pad[3];
 } __packed;
 
-struct acx_bt_wlan_coex_param {
+struct acx_sta_bt_wlan_coex_param {
 	struct acx_header header;
 
-	__le32 params[CONF_SG_PARAMS_MAX];
+	__le32 params[CONF_SG_STA_PARAMS_MAX];
 	u8 param_idx;
 	u8 padding[3];
 } __packed;
 
+struct acx_ap_bt_wlan_coex_param {
+	struct acx_header header;
+
+	__le32 params[CONF_SG_AP_PARAMS_MAX];
+	u8 param_idx;
+	u8 padding[3];
+} __packed;
+
+
 struct acx_dco_itrim_params {
 	struct acx_header header;
 
@@ -1330,7 +1339,8 @@ int wl1271_acx_beacon_filter_opt(struct wl1271 *wl, bool enable_filter);
 int wl1271_acx_beacon_filter_table(struct wl1271 *wl);
 int wl1271_acx_conn_monit_params(struct wl1271 *wl, bool enable);
 int wl1271_acx_sg_enable(struct wl1271 *wl, bool enable);
-int wl1271_acx_sg_cfg(struct wl1271 *wl);
+int wl1271_acx_sta_sg_cfg(struct wl1271 *wl);
+int wl1271_acx_ap_sg_cfg(struct wl1271 *wl);
 int wl1271_acx_cca_threshold(struct wl1271 *wl);
 int wl1271_acx_bcn_dtim_options(struct wl1271 *wl);
 int wl1271_acx_aid(struct wl1271 *wl, u16 aid);
diff --git a/drivers/net/wireless/wl12xx/conf.h b/drivers/net/wireless/wl12xx/conf.h
index a4e0acff867..2ffbe3e0601 100644
--- a/drivers/net/wireless/wl12xx/conf.h
+++ b/drivers/net/wireless/wl12xx/conf.h
@@ -396,12 +396,43 @@ enum {
 	CONF_SG_TEMP_PARAM_3,
 	CONF_SG_TEMP_PARAM_4,
 	CONF_SG_TEMP_PARAM_5,
-	CONF_SG_PARAMS_MAX,
+
+	/*
+	 * AP beacon miss
+	 *
+	 * Range: 0 - 255
+	 */
+	CONF_SG_AP_BEACON_MISS_TX,
+
+	/*
+	 * AP RX window length
+	 *
+	 * Range: 0 - 50
+	 */
+	CONF_SG_RX_WINDOW_LENGTH,
+
+	/*
+	 * AP connection protection time
+	 *
+	 * Range: 0 - 5000
+	 */
+	CONF_SG_AP_CONNECTION_PROTECTION_TIME,
+
+	CONF_SG_TEMP_PARAM_6,
+	CONF_SG_TEMP_PARAM_7,
+	CONF_SG_TEMP_PARAM_8,
+	CONF_SG_TEMP_PARAM_9,
+	CONF_SG_TEMP_PARAM_10,
+
+	CONF_SG_STA_PARAMS_MAX = CONF_SG_TEMP_PARAM_5 + 1,
+	CONF_SG_AP_PARAMS_MAX = CONF_SG_TEMP_PARAM_10 + 1,
+
 	CONF_SG_PARAMS_ALL = 0xff
 };
 
 struct conf_sg_settings {
-	u32 params[CONF_SG_PARAMS_MAX];
+	u32 sta_params[CONF_SG_STA_PARAMS_MAX];
+	u32 ap_params[CONF_SG_AP_PARAMS_MAX];
 	u8 state;
 };
 
diff --git a/drivers/net/wireless/wl12xx/init.c b/drivers/net/wireless/wl12xx/init.c
index 46fd7212b23..1be65691478 100644
--- a/drivers/net/wireless/wl12xx/init.c
+++ b/drivers/net/wireless/wl12xx/init.c
@@ -285,7 +285,10 @@ int wl1271_init_pta(struct wl1271 *wl)
 {
 	int ret;
 
-	ret = wl1271_acx_sg_cfg(wl);
+	if (wl->bss_type == BSS_TYPE_AP_BSS)
+		ret = wl1271_acx_ap_sg_cfg(wl);
+	else
+		ret = wl1271_acx_sta_sg_cfg(wl);
 	if (ret < 0)
 		return ret;
 
@@ -351,11 +354,6 @@ static int wl1271_sta_hw_init(struct wl1271 *wl)
 	if (ret < 0)
 		return ret;
 
-	/* Bluetooth WLAN coexistence */
-	ret = wl1271_init_pta(wl);
-	if (ret < 0)
-		return ret;
-
 	/* FM WLAN coexistence */
 	ret = wl1271_acx_fm_coex(wl);
 	if (ret < 0)
@@ -572,6 +570,11 @@ int wl1271_hw_init(struct wl1271 *wl)
 	if (ret < 0)
 		return ret;
 
+	/* Bluetooth WLAN coexistence */
+	ret = wl1271_init_pta(wl);
+	if (ret < 0)
+		return ret;
+
 	/* Default memory configuration */
 	ret = wl1271_acx_init_mem_config(wl);
 	if (ret < 0)
diff --git a/drivers/net/wireless/wl12xx/main.c b/drivers/net/wireless/wl12xx/main.c
index a8770102a74..5f8bb35c647 100644
--- a/drivers/net/wireless/wl12xx/main.c
+++ b/drivers/net/wireless/wl12xx/main.c
@@ -51,7 +51,7 @@
 
 static struct conf_drv_settings default_conf = {
 	.sg = {
-		.params = {
+		.sta_params = {
 			[CONF_SG_BT_PER_THRESHOLD]                  = 7500,
 			[CONF_SG_HV3_MAX_OVERRIDE]                  = 0,
 			[CONF_SG_BT_NFS_SAMPLE_INTERVAL]            = 400,
@@ -101,6 +101,61 @@ static struct conf_drv_settings default_conf = {
 			[CONF_SG_DHCP_TIME]                         = 5000,
 			[CONF_SG_ACTIVE_SCAN_DURATION_FACTOR_A2DP]  = 100,
 		},
+		.ap_params = {
+			[CONF_SG_BT_PER_THRESHOLD]                  = 7500,
+			[CONF_SG_HV3_MAX_OVERRIDE]                  = 0,
+			[CONF_SG_BT_NFS_SAMPLE_INTERVAL]            = 400,
+			[CONF_SG_BT_LOAD_RATIO]                     = 50,
+			[CONF_SG_AUTO_PS_MODE]                      = 1,
+			[CONF_SG_AUTO_SCAN_PROBE_REQ]               = 170,
+			[CONF_SG_ACTIVE_SCAN_DURATION_FACTOR_HV3]   = 50,
+			[CONF_SG_ANTENNA_CONFIGURATION]             = 0,
+			[CONF_SG_BEACON_MISS_PERCENT]               = 60,
+			[CONF_SG_RATE_ADAPT_THRESH]                 = 64,
+			[CONF_SG_RATE_ADAPT_SNR]                    = 1,
+			[CONF_SG_WLAN_PS_BT_ACL_MASTER_MIN_BR]      = 10,
+			[CONF_SG_WLAN_PS_BT_ACL_MASTER_MAX_BR]      = 25,
+			[CONF_SG_WLAN_PS_MAX_BT_ACL_MASTER_BR]      = 25,
+			[CONF_SG_WLAN_PS_BT_ACL_SLAVE_MIN_BR]       = 20,
+			[CONF_SG_WLAN_PS_BT_ACL_SLAVE_MAX_BR]       = 25,
+			[CONF_SG_WLAN_PS_MAX_BT_ACL_SLAVE_BR]       = 25,
+			[CONF_SG_WLAN_PS_BT_ACL_MASTER_MIN_EDR]     = 7,
+			[CONF_SG_WLAN_PS_BT_ACL_MASTER_MAX_EDR]     = 25,
+			[CONF_SG_WLAN_PS_MAX_BT_ACL_MASTER_EDR]     = 25,
+			[CONF_SG_WLAN_PS_BT_ACL_SLAVE_MIN_EDR]      = 8,
+			[CONF_SG_WLAN_PS_BT_ACL_SLAVE_MAX_EDR]      = 25,
+			[CONF_SG_WLAN_PS_MAX_BT_ACL_SLAVE_EDR]      = 25,
+			[CONF_SG_RXT]                               = 1200,
+			[CONF_SG_TXT]                               = 1000,
+			[CONF_SG_ADAPTIVE_RXT_TXT]                  = 1,
+			[CONF_SG_PS_POLL_TIMEOUT]                   = 10,
+			[CONF_SG_UPSD_TIMEOUT]                      = 10,
+			[CONF_SG_WLAN_ACTIVE_BT_ACL_MASTER_MIN_EDR] = 7,
+			[CONF_SG_WLAN_ACTIVE_BT_ACL_MASTER_MAX_EDR] = 15,
+			[CONF_SG_WLAN_ACTIVE_MAX_BT_ACL_MASTER_EDR] = 15,
+			[CONF_SG_WLAN_ACTIVE_BT_ACL_SLAVE_MIN_EDR]  = 8,
+			[CONF_SG_WLAN_ACTIVE_BT_ACL_SLAVE_MAX_EDR]  = 20,
+			[CONF_SG_WLAN_ACTIVE_MAX_BT_ACL_SLAVE_EDR]  = 15,
+			[CONF_SG_WLAN_ACTIVE_BT_ACL_MIN_BR]         = 20,
+			[CONF_SG_WLAN_ACTIVE_BT_ACL_MAX_BR]         = 50,
+			[CONF_SG_WLAN_ACTIVE_MAX_BT_ACL_BR]         = 10,
+			[CONF_SG_PASSIVE_SCAN_DURATION_FACTOR_HV3]  = 200,
+			[CONF_SG_PASSIVE_SCAN_DURATION_FACTOR_A2DP] = 800,
+			[CONF_SG_PASSIVE_SCAN_A2DP_BT_TIME]         = 75,
+			[CONF_SG_PASSIVE_SCAN_A2DP_WLAN_TIME]       = 15,
+			[CONF_SG_HV3_MAX_SERVED]                    = 6,
+			[CONF_SG_DHCP_TIME]                         = 5000,
+			[CONF_SG_ACTIVE_SCAN_DURATION_FACTOR_A2DP]  = 100,
+			[CONF_SG_TEMP_PARAM_1]                      = 0,
+			[CONF_SG_TEMP_PARAM_2]                      = 0,
+			[CONF_SG_TEMP_PARAM_3]                      = 0,
+			[CONF_SG_TEMP_PARAM_4]                      = 0,
+			[CONF_SG_TEMP_PARAM_5]                      = 0,
+			[CONF_SG_AP_BEACON_MISS_TX]                 = 3,
+			[CONF_SG_RX_WINDOW_LENGTH]                  = 6,
+			[CONF_SG_AP_CONNECTION_PROTECTION_TIME]     = 50,
+			[CONF_SG_TEMP_PARAM_6]                      = 1,
+		},
 		.state = CONF_SG_PROTECTIVE,
 	},
 	.rx = {
-- 
cgit v1.2.3-70-g09d2


From 5f704d180e448d05859e1cb6572822ba27dbcdc7 Mon Sep 17 00:00:00 2001
From: Arik Nemtsov <arik@wizery.com>
Date: Mon, 18 Apr 2011 14:15:21 +0300
Subject: wl12xx: use wiphy values for setting rts, frag thresholds on init

Use the wiphy RTS and fragmentation thresholds for initializing the FW
when possible. This mitigates a bug where previously set values are
forgotten after interface down/up.

Add checks before settings these values to ensure they are valid. Use
default values when invalid thresholds are configured.

Update the default RTS threshold to the maximum value given by the
specification.

Signed-off-by: Arik Nemtsov <arik@wizery.com>
Signed-off-by: Luciano Coelho <coelho@ti.com>
---
 drivers/net/wireless/wl12xx/acx.c  | 26 ++++++++++++++++++++------
 drivers/net/wireless/wl12xx/acx.h  |  4 ++--
 drivers/net/wireless/wl12xx/init.c |  4 ++--
 drivers/net/wireless/wl12xx/main.c |  6 +++---
 4 files changed, 27 insertions(+), 13 deletions(-)

(limited to 'drivers/net/wireless/wl12xx')

diff --git a/drivers/net/wireless/wl12xx/acx.c b/drivers/net/wireless/wl12xx/acx.c
index 2b5fb3d2df1..729f72a7b91 100644
--- a/drivers/net/wireless/wl12xx/acx.c
+++ b/drivers/net/wireless/wl12xx/acx.c
@@ -325,12 +325,19 @@ out:
 	return ret;
 }
 
-int wl1271_acx_rts_threshold(struct wl1271 *wl, u16 rts_threshold)
+int wl1271_acx_rts_threshold(struct wl1271 *wl, u32 rts_threshold)
 {
 	struct acx_rts_threshold *rts;
 	int ret;
 
-	wl1271_debug(DEBUG_ACX, "acx rts threshold");
+	/*
+	 * If the RTS threshold is not configured or out of range, use the
+	 * default value.
+	 */
+	if (rts_threshold > IEEE80211_MAX_RTS_THRESHOLD)
+		rts_threshold = wl->conf.rx.rts_threshold;
+
+	wl1271_debug(DEBUG_ACX, "acx rts threshold: %d", rts_threshold);
 
 	rts = kzalloc(sizeof(*rts), GFP_KERNEL);
 	if (!rts) {
@@ -338,7 +345,7 @@ int wl1271_acx_rts_threshold(struct wl1271 *wl, u16 rts_threshold)
 		goto out;
 	}
 
-	rts->threshold = cpu_to_le16(rts_threshold);
+	rts->threshold = cpu_to_le16((u16)rts_threshold);
 
 	ret = wl1271_cmd_configure(wl, DOT11_RTS_THRESHOLD, rts, sizeof(*rts));
 	if (ret < 0) {
@@ -928,12 +935,19 @@ out:
 	return ret;
 }
 
-int wl1271_acx_frag_threshold(struct wl1271 *wl, u16 frag_threshold)
+int wl1271_acx_frag_threshold(struct wl1271 *wl, u32 frag_threshold)
 {
 	struct acx_frag_threshold *acx;
 	int ret = 0;
 
-	wl1271_debug(DEBUG_ACX, "acx frag threshold");
+	/*
+	 * If the fragmentation is not configured or out of range, use the
+	 * default value.
+	 */
+	if (frag_threshold > IEEE80211_MAX_FRAG_THRESHOLD)
+		frag_threshold = wl->conf.tx.frag_threshold;
+
+	wl1271_debug(DEBUG_ACX, "acx frag threshold: %d", frag_threshold);
 
 	acx = kzalloc(sizeof(*acx), GFP_KERNEL);
 
@@ -942,7 +956,7 @@ int wl1271_acx_frag_threshold(struct wl1271 *wl, u16 frag_threshold)
 		goto out;
 	}
 
-	acx->frag_threshold = cpu_to_le16(frag_threshold);
+	acx->frag_threshold = cpu_to_le16((u16)frag_threshold);
 	ret = wl1271_cmd_configure(wl, ACX_FRAG_CFG, acx, sizeof(*acx));
 	if (ret < 0) {
 		wl1271_warning("Setting of frag threshold failed: %d", ret);
diff --git a/drivers/net/wireless/wl12xx/acx.h b/drivers/net/wireless/wl12xx/acx.h
index cd7548dacd5..828367d6266 100644
--- a/drivers/net/wireless/wl12xx/acx.h
+++ b/drivers/net/wireless/wl12xx/acx.h
@@ -1333,7 +1333,7 @@ int wl1271_acx_slot(struct wl1271 *wl, enum acx_slot_type slot_time);
 int wl1271_acx_group_address_tbl(struct wl1271 *wl, bool enable,
 				 void *mc_list, u32 mc_list_len);
 int wl1271_acx_service_period_timeout(struct wl1271 *wl);
-int wl1271_acx_rts_threshold(struct wl1271 *wl, u16 rts_threshold);
+int wl1271_acx_rts_threshold(struct wl1271 *wl, u32 rts_threshold);
 int wl1271_acx_dco_itrim_params(struct wl1271 *wl);
 int wl1271_acx_beacon_filter_opt(struct wl1271 *wl, bool enable_filter);
 int wl1271_acx_beacon_filter_table(struct wl1271 *wl);
@@ -1357,7 +1357,7 @@ int wl1271_acx_ac_cfg(struct wl1271 *wl, u8 ac, u8 cw_min, u16 cw_max,
 int wl1271_acx_tid_cfg(struct wl1271 *wl, u8 queue_id, u8 channel_type,
 		       u8 tsid, u8 ps_scheme, u8 ack_policy,
 		       u32 apsd_conf0, u32 apsd_conf1);
-int wl1271_acx_frag_threshold(struct wl1271 *wl, u16 frag_threshold);
+int wl1271_acx_frag_threshold(struct wl1271 *wl, u32 frag_threshold);
 int wl1271_acx_tx_config_options(struct wl1271 *wl);
 int wl1271_acx_ap_mem_cfg(struct wl1271 *wl);
 int wl1271_acx_sta_mem_cfg(struct wl1271 *wl);
diff --git a/drivers/net/wireless/wl12xx/init.c b/drivers/net/wireless/wl12xx/init.c
index 1be65691478..060ca31818e 100644
--- a/drivers/net/wireless/wl12xx/init.c
+++ b/drivers/net/wireless/wl12xx/init.c
@@ -258,7 +258,7 @@ int wl1271_init_phy_config(struct wl1271 *wl)
 	if (ret < 0)
 		return ret;
 
-	ret = wl1271_acx_rts_threshold(wl, wl->conf.rx.rts_threshold);
+	ret = wl1271_acx_rts_threshold(wl, wl->hw->wiphy->rts_threshold);
 	if (ret < 0)
 		return ret;
 
@@ -614,7 +614,7 @@ int wl1271_hw_init(struct wl1271 *wl)
 		goto out_free_memmap;
 
 	/* Default fragmentation threshold */
-	ret = wl1271_acx_frag_threshold(wl, wl->conf.tx.frag_threshold);
+	ret = wl1271_acx_frag_threshold(wl, wl->hw->wiphy->frag_threshold);
 	if (ret < 0)
 		goto out_free_memmap;
 
diff --git a/drivers/net/wireless/wl12xx/main.c b/drivers/net/wireless/wl12xx/main.c
index 5f8bb35c647..81a0c8ed5a4 100644
--- a/drivers/net/wireless/wl12xx/main.c
+++ b/drivers/net/wireless/wl12xx/main.c
@@ -163,7 +163,7 @@ static struct conf_drv_settings default_conf = {
 		.packet_detection_threshold  = 0,
 		.ps_poll_timeout             = 15,
 		.upsd_timeout                = 15,
-		.rts_threshold               = 2347,
+		.rts_threshold               = IEEE80211_MAX_RTS_THRESHOLD,
 		.rx_cca_threshold            = 0,
 		.irq_blk_threshold           = 0xFFFF,
 		.irq_pkt_threshold           = 0,
@@ -2360,7 +2360,7 @@ static int wl1271_op_set_frag_threshold(struct ieee80211_hw *hw, u32 value)
 	if (ret < 0)
 		goto out;
 
-	ret = wl1271_acx_frag_threshold(wl, (u16)value);
+	ret = wl1271_acx_frag_threshold(wl, value);
 	if (ret < 0)
 		wl1271_warning("wl1271_op_set_frag_threshold failed: %d", ret);
 
@@ -2388,7 +2388,7 @@ static int wl1271_op_set_rts_threshold(struct ieee80211_hw *hw, u32 value)
 	if (ret < 0)
 		goto out;
 
-	ret = wl1271_acx_rts_threshold(wl, (u16) value);
+	ret = wl1271_acx_rts_threshold(wl, value);
 	if (ret < 0)
 		wl1271_warning("wl1271_op_set_rts_threshold failed: %d", ret);
 
-- 
cgit v1.2.3-70-g09d2


From 521a4a23261354885c01bf75b42150629004ed83 Mon Sep 17 00:00:00 2001
From: Arik Nemtsov <arik@wizery.com>
Date: Mon, 18 Apr 2011 14:15:22 +0300
Subject: wl12xx: AP-mode - disable beacon filtering on start up

New AP-mode FWs filter external beacons by default. Disable this
filtering on start up so we can properly configure ERP protection.

Signed-off-by: Arik Nemtsov <arik@wizery.com>
Signed-off-by: Luciano Coelho <coelho@ti.com>
---
 drivers/net/wireless/wl12xx/acx.c  | 25 +++++++++++++++++++++++++
 drivers/net/wireless/wl12xx/acx.h  | 10 +++++++++-
 drivers/net/wireless/wl12xx/init.c |  8 ++++++++
 3 files changed, 42 insertions(+), 1 deletion(-)

(limited to 'drivers/net/wireless/wl12xx')

diff --git a/drivers/net/wireless/wl12xx/acx.c b/drivers/net/wireless/wl12xx/acx.c
index 729f72a7b91..6860d7e9df7 100644
--- a/drivers/net/wireless/wl12xx/acx.c
+++ b/drivers/net/wireless/wl12xx/acx.c
@@ -1679,6 +1679,31 @@ out:
 	return ret;
 }
 
+int wl1271_acx_set_ap_beacon_filter(struct wl1271 *wl, bool enable)
+{
+	struct acx_ap_beacon_filter *acx = NULL;
+	int ret;
+
+	wl1271_debug(DEBUG_ACX, "acx set ap beacon filter: %d", enable);
+
+	acx = kzalloc(sizeof(*acx), GFP_KERNEL);
+	if (!acx)
+		return -ENOMEM;
+
+	acx->enable = enable ? 1 : 0;
+
+	ret = wl1271_cmd_configure(wl, ACX_AP_BEACON_FILTER_OPT,
+				   acx, sizeof(*acx));
+	if (ret < 0) {
+		wl1271_warning("acx set ap beacon filter failed: %d", ret);
+		goto out;
+	}
+
+out:
+	kfree(acx);
+	return ret;
+}
+
 int wl1271_acx_fm_coex(struct wl1271 *wl)
 {
 	struct wl1271_acx_fm_coex *acx;
diff --git a/drivers/net/wireless/wl12xx/acx.h b/drivers/net/wireless/wl12xx/acx.h
index 828367d6266..75338f9947c 100644
--- a/drivers/net/wireless/wl12xx/acx.h
+++ b/drivers/net/wireless/wl12xx/acx.h
@@ -303,7 +303,6 @@ struct acx_beacon_filter_option {
 	struct acx_header header;
 
 	u8 enable;
-
 	/*
 	 * The number of beacons without the unicast TIM
 	 * bit set that the firmware buffers before
@@ -1188,6 +1187,13 @@ struct wl1271_acx_inconnection_sta {
 	u8 padding1[2];
 } __packed;
 
+struct acx_ap_beacon_filter {
+	struct acx_header header;
+
+	u8 enable;
+	u8 pad[3];
+} __packed;
+
 /*
  * ACX_FM_COEX_CFG
  * set the FM co-existence parameters.
@@ -1265,6 +1271,7 @@ enum {
 	ACX_TID_CFG                 = 0x001A,
 	ACX_PS_RX_STREAMING         = 0x001B,
 	ACX_BEACON_FILTER_OPT       = 0x001F,
+	ACX_AP_BEACON_FILTER_OPT    = 0x0020,
 	ACX_NOISE_HIST              = 0x0021,
 	ACX_HDK_VERSION             = 0x0022, /* ??? */
 	ACX_PD_THRESHOLD            = 0x0023,
@@ -1388,6 +1395,7 @@ int wl1271_acx_ap_max_tx_retry(struct wl1271 *wl);
 int wl1271_acx_sta_max_tx_retry(struct wl1271 *wl);
 int wl1271_acx_config_ps(struct wl1271 *wl);
 int wl1271_acx_set_inconnection_sta(struct wl1271 *wl, u8 *addr);
+int wl1271_acx_set_ap_beacon_filter(struct wl1271 *wl, bool enable);
 int wl1271_acx_fm_coex(struct wl1271 *wl);
 
 #endif /* __WL1271_ACX_H__ */
diff --git a/drivers/net/wireless/wl12xx/init.c b/drivers/net/wireless/wl12xx/init.c
index 060ca31818e..e0de041e38f 100644
--- a/drivers/net/wireless/wl12xx/init.c
+++ b/drivers/net/wireless/wl12xx/init.c
@@ -475,6 +475,14 @@ static int wl1271_ap_hw_init_post_mem(struct wl1271 *wl)
 	if (ret < 0)
 		return ret;
 
+	/*
+	 * when operating as AP we want to receive external beacons for
+	 * configuring ERP protection.
+	 */
+	ret = wl1271_acx_set_ap_beacon_filter(wl, false);
+	if (ret < 0)
+		return ret;
+
 	return 0;
 }
 
-- 
cgit v1.2.3-70-g09d2


From f482b76202f4ac0f62a77b0e55ac1a1cfe480e2b Mon Sep 17 00:00:00 2001
From: Arik Nemtsov <arik@wizery.com>
Date: Mon, 18 Apr 2011 14:15:23 +0300
Subject: wl12xx: schedule recovery on command timeout

We use a long timeout (2 seconds) when sending commands to the FW.
When a command times out, it means the FW is stuck, and we should
commence recovery.

This should make recovery times shorter as we'll recover on the first
timeout indication.

Signed-off-by: Arik Nemtsov <arik@wizery.com>
Signed-off-by: Luciano Coelho <coelho@ti.com>
---
 drivers/net/wireless/wl12xx/cmd.c | 9 ++++++---
 1 file changed, 6 insertions(+), 3 deletions(-)

(limited to 'drivers/net/wireless/wl12xx')

diff --git a/drivers/net/wireless/wl12xx/cmd.c b/drivers/net/wireless/wl12xx/cmd.c
index a9ffdd86f9b..d8596ae3a64 100644
--- a/drivers/net/wireless/wl12xx/cmd.c
+++ b/drivers/net/wireless/wl12xx/cmd.c
@@ -76,7 +76,7 @@ int wl1271_cmd_send(struct wl1271 *wl, u16 id, void *buf, size_t len,
 		if (time_after(jiffies, timeout)) {
 			wl1271_error("command complete timeout");
 			ret = -ETIMEDOUT;
-			goto out;
+			goto fail;
 		}
 
 		poll_count++;
@@ -96,14 +96,17 @@ int wl1271_cmd_send(struct wl1271 *wl, u16 id, void *buf, size_t len,
 	status = le16_to_cpu(cmd->status);
 	if (status != CMD_STATUS_SUCCESS) {
 		wl1271_error("command execute failure %d", status);
-		ieee80211_queue_work(wl->hw, &wl->recovery_work);
 		ret = -EIO;
+		goto fail;
 	}
 
 	wl1271_write32(wl, ACX_REG_INTERRUPT_ACK,
 		       WL1271_ACX_INTR_CMD_COMPLETE);
+	return 0;
 
-out:
+fail:
+	WARN_ON(1);
+	ieee80211_queue_work(wl->hw, &wl->recovery_work);
 	return ret;
 }
 
-- 
cgit v1.2.3-70-g09d2


From 52dcaf577f3b6d878a337a44a99a122017c85ff6 Mon Sep 17 00:00:00 2001
From: Arik Nemtsov <arik@wizery.com>
Date: Mon, 18 Apr 2011 14:15:24 +0300
Subject: wl12xx: print firmware program counter during recovery

When performing recovery, print the firmware version and program
counter (by reading the SCR_PAD4 register). The value of the firmware
program counter during assert can be useful for debugging.

Signed-off-by: Arik Nemtsov <arik@wizery.com>
Signed-off-by: Luciano Coelho <coelho@ti.com>
---
 drivers/net/wireless/wl12xx/main.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

(limited to 'drivers/net/wireless/wl12xx')

diff --git a/drivers/net/wireless/wl12xx/main.c b/drivers/net/wireless/wl12xx/main.c
index 81a0c8ed5a4..7b88dd2e85e 100644
--- a/drivers/net/wireless/wl12xx/main.c
+++ b/drivers/net/wireless/wl12xx/main.c
@@ -1004,7 +1004,8 @@ static void wl1271_recovery_work(struct work_struct *work)
 	if (wl->state != WL1271_STATE_ON)
 		goto out;
 
-	wl1271_info("Hardware recovery in progress.");
+	wl1271_info("Hardware recovery in progress. FW ver: %s pc: 0x%x",
+		    wl->chip.fw_ver_str, wl1271_read32(wl, SCR_PAD4));
 
 	if (test_bit(WL1271_FLAG_STA_ASSOCIATED, &wl->flags))
 		ieee80211_connection_loss(wl->vif);
-- 
cgit v1.2.3-70-g09d2


From 70f474241b3d5fb633635a2ce39ea9da4afeea6c Mon Sep 17 00:00:00 2001
From: Arik Nemtsov <arik@wizery.com>
Date: Mon, 18 Apr 2011 14:15:25 +0300
Subject: wl12xx: AP-mode - overhaul rate policy configuration

Use the minimal rate configured in the basic rates set as the AP
broadcast and multicast rate. The minimal rate is used to ensure weak
links can still communicate.

When the basic rates contains at least one OFDM rate, configure all
unicast TX rates to OFDM only.

Unify rate configuration on initialization and on change notification
into a single function.

Signed-off-by: Arik Nemtsov <arik@wizery.com>
Signed-off-by: Luciano Coelho <coelho@ti.com>
---
 drivers/net/wireless/wl12xx/acx.c  |  3 +-
 drivers/net/wireless/wl12xx/conf.h | 22 ++++--------
 drivers/net/wireless/wl12xx/init.c | 71 ++++++++++++++++++++++++++++----------
 drivers/net/wireless/wl12xx/init.h |  1 +
 drivers/net/wireless/wl12xx/main.c | 53 ++--------------------------
 5 files changed, 65 insertions(+), 85 deletions(-)

(limited to 'drivers/net/wireless/wl12xx')

diff --git a/drivers/net/wireless/wl12xx/acx.c b/drivers/net/wireless/wl12xx/acx.c
index 6860d7e9df7..ec0156b3e27 100644
--- a/drivers/net/wireless/wl12xx/acx.c
+++ b/drivers/net/wireless/wl12xx/acx.c
@@ -841,7 +841,8 @@ int wl1271_acx_ap_rate_policy(struct wl1271 *wl, struct conf_tx_rate_class *c,
 	struct acx_ap_rate_policy *acx;
 	int ret = 0;
 
-	wl1271_debug(DEBUG_ACX, "acx ap rate policy");
+	wl1271_debug(DEBUG_ACX, "acx ap rate policy %d rates 0x%x",
+		     idx, c->enabled_rates);
 
 	acx = kzalloc(sizeof(*acx), GFP_KERNEL);
 	if (!acx) {
diff --git a/drivers/net/wireless/wl12xx/conf.h b/drivers/net/wireless/wl12xx/conf.h
index 2ffbe3e0601..c0045f0b8b4 100644
--- a/drivers/net/wireless/wl12xx/conf.h
+++ b/drivers/net/wireless/wl12xx/conf.h
@@ -540,6 +540,12 @@ struct conf_rx_settings {
 	CONF_HW_BIT_RATE_36MBPS | CONF_HW_BIT_RATE_48MBPS |      \
 	CONF_HW_BIT_RATE_54MBPS)
 
+#define CONF_TX_OFDM_RATES (CONF_HW_BIT_RATE_6MBPS |             \
+	CONF_HW_BIT_RATE_12MBPS | CONF_HW_BIT_RATE_24MBPS |      \
+	CONF_HW_BIT_RATE_36MBPS | CONF_HW_BIT_RATE_48MBPS |      \
+	CONF_HW_BIT_RATE_54MBPS)
+
+
 /*
  * Default rates for management traffic when operating in AP mode. This
  * should be configured according to the basic rate set of the AP
@@ -704,22 +710,6 @@ struct conf_tx_settings {
 	u8 ac_conf_count;
 	struct conf_tx_ac_category ac_conf[CONF_TX_MAX_AC_COUNT];
 
-	/*
-	 * Configuration for rate classes in AP-mode. These rate classes
-	 * are for the AC TX queues
-	 */
-	struct conf_tx_rate_class ap_rc_conf[CONF_TX_MAX_AC_COUNT];
-
-	/*
-	 * Management TX rate class for AP-mode.
-	 */
-	struct conf_tx_rate_class ap_mgmt_conf;
-
-	/*
-	 * Broadcast TX rate class for AP-mode.
-	 */
-	struct conf_tx_rate_class ap_bcst_conf;
-
 	/*
 	 * Allow this number of TX retries to a connected station/AP before an
 	 * event is triggered from FW.
diff --git a/drivers/net/wireless/wl12xx/init.c b/drivers/net/wireless/wl12xx/init.c
index e0de041e38f..5d0ecd2018b 100644
--- a/drivers/net/wireless/wl12xx/init.c
+++ b/drivers/net/wireless/wl12xx/init.c
@@ -417,7 +417,7 @@ static int wl1271_sta_hw_init_post_mem(struct wl1271 *wl)
 
 static int wl1271_ap_hw_init(struct wl1271 *wl)
 {
-	int ret, i;
+	int ret;
 
 	ret = wl1271_ap_init_templates_config(wl);
 	if (ret < 0)
@@ -428,23 +428,7 @@ static int wl1271_ap_hw_init(struct wl1271 *wl)
 	if (ret < 0)
 		return ret;
 
-	/* Configure initial TX rate classes */
-	for (i = 0; i < wl->conf.tx.ac_conf_count; i++) {
-		ret = wl1271_acx_ap_rate_policy(wl,
-				&wl->conf.tx.ap_rc_conf[i], i);
-		if (ret < 0)
-			return ret;
-	}
-
-	ret = wl1271_acx_ap_rate_policy(wl,
-					&wl->conf.tx.ap_mgmt_conf,
-					ACX_TX_AP_MODE_MGMT_RATE);
-	if (ret < 0)
-		return ret;
-
-	ret = wl1271_acx_ap_rate_policy(wl,
-					&wl->conf.tx.ap_bcst_conf,
-					ACX_TX_AP_MODE_BCST_RATE);
+	ret = wl1271_init_ap_rates(wl);
 	if (ret < 0)
 		return ret;
 
@@ -486,6 +470,57 @@ static int wl1271_ap_hw_init_post_mem(struct wl1271 *wl)
 	return 0;
 }
 
+int wl1271_init_ap_rates(struct wl1271 *wl)
+{
+	int i, ret;
+	struct conf_tx_rate_class rc;
+	u32 supported_rates;
+
+	wl1271_debug(DEBUG_AP, "AP basic rate set: 0x%x", wl->basic_rate_set);
+
+	if (wl->basic_rate_set == 0)
+		return -EINVAL;
+
+	rc.enabled_rates = wl->basic_rate_set;
+	rc.long_retry_limit = 10;
+	rc.short_retry_limit = 10;
+	rc.aflags = 0;
+	ret = wl1271_acx_ap_rate_policy(wl, &rc, ACX_TX_AP_MODE_MGMT_RATE);
+	if (ret < 0)
+		return ret;
+
+	/* use the min basic rate for AP broadcast/multicast */
+	rc.enabled_rates = wl1271_tx_min_rate_get(wl);
+	rc.short_retry_limit = 10;
+	rc.long_retry_limit = 10;
+	rc.aflags = 0;
+	ret = wl1271_acx_ap_rate_policy(wl, &rc, ACX_TX_AP_MODE_BCST_RATE);
+	if (ret < 0)
+		return ret;
+
+	/*
+	 * If the basic rates contain OFDM rates, use OFDM only
+	 * rates for unicast TX as well. Else use all supported rates.
+	 */
+	if ((wl->basic_rate_set & CONF_TX_OFDM_RATES))
+		supported_rates = CONF_TX_OFDM_RATES;
+	else
+		supported_rates = CONF_TX_AP_ENABLED_RATES;
+
+	/* configure unicast TX rate classes */
+	for (i = 0; i < wl->conf.tx.ac_conf_count; i++) {
+		rc.enabled_rates = supported_rates;
+		rc.short_retry_limit = 10;
+		rc.long_retry_limit = 10;
+		rc.aflags = 0;
+		ret = wl1271_acx_ap_rate_policy(wl, &rc, i);
+		if (ret < 0)
+			return ret;
+	}
+
+	return 0;
+}
+
 static void wl1271_check_ba_support(struct wl1271 *wl)
 {
 	/* validate FW cose ver x.x.x.50-60.x */
diff --git a/drivers/net/wireless/wl12xx/init.h b/drivers/net/wireless/wl12xx/init.h
index 4975270a91a..0dd2414a30d 100644
--- a/drivers/net/wireless/wl12xx/init.h
+++ b/drivers/net/wireless/wl12xx/init.h
@@ -33,5 +33,6 @@ int wl1271_init_pta(struct wl1271 *wl);
 int wl1271_init_energy_detection(struct wl1271 *wl);
 int wl1271_chip_specific_init(struct wl1271 *wl);
 int wl1271_hw_init(struct wl1271 *wl);
+int wl1271_init_ap_rates(struct wl1271 *wl);
 
 #endif
diff --git a/drivers/net/wireless/wl12xx/main.c b/drivers/net/wireless/wl12xx/main.c
index 7b88dd2e85e..e9d4cf48ba3 100644
--- a/drivers/net/wireless/wl12xx/main.c
+++ b/drivers/net/wireless/wl12xx/main.c
@@ -209,44 +209,6 @@ static struct conf_drv_settings default_conf = {
 				.tx_op_limit = 1504,
 			},
 		},
-		.ap_rc_conf                  = {
-			[0] = {
-				.enabled_rates = CONF_TX_AP_ENABLED_RATES,
-				.short_retry_limit = 10,
-				.long_retry_limit = 10,
-				.aflags      = 0,
-			},
-			[1] = {
-				.enabled_rates = CONF_TX_AP_ENABLED_RATES,
-				.short_retry_limit = 10,
-				.long_retry_limit = 10,
-				.aflags      = 0,
-			},
-			[2] = {
-				.enabled_rates = CONF_TX_AP_ENABLED_RATES,
-				.short_retry_limit = 10,
-				.long_retry_limit = 10,
-				.aflags      = 0,
-			},
-			[3] = {
-				.enabled_rates = CONF_TX_AP_ENABLED_RATES,
-				.short_retry_limit = 10,
-				.long_retry_limit = 10,
-				.aflags      = 0,
-			},
-		},
-		.ap_mgmt_conf = {
-			.enabled_rates       = CONF_TX_AP_DEFAULT_MGMT_RATES,
-			.short_retry_limit   = 10,
-			.long_retry_limit    = 10,
-			.aflags              = 0,
-		},
-		.ap_bcst_conf = {
-			.enabled_rates       = CONF_HW_BIT_RATE_1MBPS,
-			.short_retry_limit   = 10,
-			.long_retry_limit    = 10,
-			.aflags              = 0,
-		},
 		.max_tx_retries = 100,
 		.ap_aging_period = 300,
 		.tid_conf_count = 4,
@@ -2532,22 +2494,13 @@ static void wl1271_bss_info_changed_ap(struct wl1271 *wl,
 
 	if ((changed & BSS_CHANGED_BASIC_RATES)) {
 		u32 rates = bss_conf->basic_rates;
-		struct conf_tx_rate_class mgmt_rc;
 
 		wl->basic_rate_set = wl1271_tx_enabled_rates_get(wl, rates);
 		wl->basic_rate = wl1271_tx_min_rate_get(wl);
-		wl1271_debug(DEBUG_AP, "basic rates: 0x%x",
-			     wl->basic_rate_set);
-
-		/* update the AP management rate policy with the new rates */
-		mgmt_rc.enabled_rates = wl->basic_rate_set;
-		mgmt_rc.long_retry_limit = 10;
-		mgmt_rc.short_retry_limit = 10;
-		mgmt_rc.aflags = 0;
-		ret = wl1271_acx_ap_rate_policy(wl, &mgmt_rc,
-						ACX_TX_AP_MODE_MGMT_RATE);
+
+		ret = wl1271_init_ap_rates(wl);
 		if (ret < 0) {
-			wl1271_error("AP mgmt policy change failed %d", ret);
+			wl1271_error("AP rate policy change failed %d", ret);
 			goto out;
 		}
 	}
-- 
cgit v1.2.3-70-g09d2


From c45a85b5a3c0ca841a7ffc700bdece8ee01486be Mon Sep 17 00:00:00 2001
From: Arik Nemtsov <arik@wizery.com>
Date: Mon, 18 Apr 2011 14:15:26 +0300
Subject: wl12xx: AP-mode - reconfigure templates after basic rates change

When there's a change in the basic rates of the AP, reconfigure relevant
templates with the new rates.

Signed-off-by: Arik Nemtsov <arik@wizery.com>
Signed-off-by: Luciano Coelho <coelho@ti.com>
---
 drivers/net/wireless/wl12xx/init.c | 7 ++++++-
 drivers/net/wireless/wl12xx/init.h | 1 +
 drivers/net/wireless/wl12xx/main.c | 4 ++++
 3 files changed, 11 insertions(+), 1 deletion(-)

(limited to 'drivers/net/wireless/wl12xx')

diff --git a/drivers/net/wireless/wl12xx/init.c b/drivers/net/wireless/wl12xx/init.c
index 5d0ecd2018b..b1242a6de27 100644
--- a/drivers/net/wireless/wl12xx/init.c
+++ b/drivers/net/wireless/wl12xx/init.c
@@ -443,7 +443,7 @@ static int wl1271_ap_hw_init(struct wl1271 *wl)
 	return 0;
 }
 
-static int wl1271_ap_hw_init_post_mem(struct wl1271 *wl)
+int wl1271_ap_init_templates(struct wl1271 *wl)
 {
 	int ret;
 
@@ -470,6 +470,11 @@ static int wl1271_ap_hw_init_post_mem(struct wl1271 *wl)
 	return 0;
 }
 
+static int wl1271_ap_hw_init_post_mem(struct wl1271 *wl)
+{
+	return wl1271_ap_init_templates(wl);
+}
+
 int wl1271_init_ap_rates(struct wl1271 *wl)
 {
 	int i, ret;
diff --git a/drivers/net/wireless/wl12xx/init.h b/drivers/net/wireless/wl12xx/init.h
index 0dd2414a30d..3a3c230fd29 100644
--- a/drivers/net/wireless/wl12xx/init.h
+++ b/drivers/net/wireless/wl12xx/init.h
@@ -34,5 +34,6 @@ int wl1271_init_energy_detection(struct wl1271 *wl);
 int wl1271_chip_specific_init(struct wl1271 *wl);
 int wl1271_hw_init(struct wl1271 *wl);
 int wl1271_init_ap_rates(struct wl1271 *wl);
+int wl1271_ap_init_templates(struct wl1271 *wl);
 
 #endif
diff --git a/drivers/net/wireless/wl12xx/main.c b/drivers/net/wireless/wl12xx/main.c
index e9d4cf48ba3..433bc035741 100644
--- a/drivers/net/wireless/wl12xx/main.c
+++ b/drivers/net/wireless/wl12xx/main.c
@@ -2503,6 +2503,10 @@ static void wl1271_bss_info_changed_ap(struct wl1271 *wl,
 			wl1271_error("AP rate policy change failed %d", ret);
 			goto out;
 		}
+
+		ret = wl1271_ap_init_templates(wl);
+		if (ret < 0)
+			goto out;
 	}
 
 	ret = wl1271_bss_beacon_info_changed(wl, vif, bss_conf, changed);
-- 
cgit v1.2.3-70-g09d2


From 2dc5a5c2c656b9029a0e635bb3a1cbcfbcb4ca5c Mon Sep 17 00:00:00 2001
From: Arik Nemtsov <arik@wizery.com>
Date: Mon, 18 Apr 2011 14:15:27 +0300
Subject: wl12xx: add debugfs entry for starting recovery

This entry is useful for debugging the driver state machine during
recovery.

Signed-off-by: Arik Nemtsov <arik@wizery.com>
Signed-off-by: Luciano Coelho <coelho@ti.com>
---
 drivers/net/wireless/wl12xx/debugfs.c | 20 ++++++++++++++++++++
 1 file changed, 20 insertions(+)

(limited to 'drivers/net/wireless/wl12xx')

diff --git a/drivers/net/wireless/wl12xx/debugfs.c b/drivers/net/wireless/wl12xx/debugfs.c
index b17cff6cd75..a2b55e55671 100644
--- a/drivers/net/wireless/wl12xx/debugfs.c
+++ b/drivers/net/wireless/wl12xx/debugfs.c
@@ -291,6 +291,25 @@ static const struct file_operations gpio_power_ops = {
 	.llseek = default_llseek,
 };
 
+static ssize_t start_recovery_write(struct file *file,
+				    const char __user *user_buf,
+				    size_t count, loff_t *ppos)
+{
+	struct wl1271 *wl = file->private_data;
+
+	mutex_lock(&wl->mutex);
+	ieee80211_queue_work(wl->hw, &wl->recovery_work);
+	mutex_unlock(&wl->mutex);
+
+	return count;
+}
+
+static const struct file_operations start_recovery_ops = {
+	.write = start_recovery_write,
+	.open = wl1271_open_file_generic,
+	.llseek = default_llseek,
+};
+
 static ssize_t dtim_interval_read(struct file *file, char __user *user_buf,
 				  size_t count, loff_t *ppos)
 {
@@ -529,6 +548,7 @@ static int wl1271_debugfs_add_files(struct wl1271 *wl,
 	DEBUGFS_ADD(excessive_retries, rootdir);
 
 	DEBUGFS_ADD(gpio_power, rootdir);
+	DEBUGFS_ADD(start_recovery, rootdir);
 	DEBUGFS_ADD(dtim_interval, rootdir);
 	DEBUGFS_ADD(beacon_interval, rootdir);
 
-- 
cgit v1.2.3-70-g09d2


From 7dece1c8e1044287287d44ac183a946333b55fc3 Mon Sep 17 00:00:00 2001
From: Arik Nemtsov <arik@wizery.com>
Date: Mon, 18 Apr 2011 14:15:28 +0300
Subject: wl12xx: fix race condition during recovery in AP mode

When operating as AP, the TX queues are not stopped when we start
recovery. mac80211 is notified only after the fact. When there is
pending TX, it will be queued even after the FW is down. This leads to
situations where the TX queues are stopped (because of the TX-watermark
mechanism), and are never woken up when we return from recovery.

Fix this by explicitly stopping the TX queues when before initiating
recovery.

Signed-off-by: Arik Nemtsov <arik@wizery.com>
Signed-off-by: Luciano Coelho <coelho@ti.com>
---
 drivers/net/wireless/wl12xx/main.c | 21 ++++++++++++++++-----
 drivers/net/wireless/wl12xx/tx.c   |  8 +++++---
 drivers/net/wireless/wl12xx/tx.h   |  2 +-
 3 files changed, 22 insertions(+), 9 deletions(-)

(limited to 'drivers/net/wireless/wl12xx')

diff --git a/drivers/net/wireless/wl12xx/main.c b/drivers/net/wireless/wl12xx/main.c
index 433bc035741..6dd42c98766 100644
--- a/drivers/net/wireless/wl12xx/main.c
+++ b/drivers/net/wireless/wl12xx/main.c
@@ -352,7 +352,8 @@ static struct conf_drv_settings default_conf = {
 	.hci_io_ds = HCI_IO_DS_6MA,
 };
 
-static void __wl1271_op_remove_interface(struct wl1271 *wl);
+static void __wl1271_op_remove_interface(struct wl1271 *wl,
+					 bool reset_tx_queues);
 static void wl1271_free_ap_keys(struct wl1271 *wl);
 
 
@@ -972,10 +973,19 @@ static void wl1271_recovery_work(struct work_struct *work)
 	if (test_bit(WL1271_FLAG_STA_ASSOCIATED, &wl->flags))
 		ieee80211_connection_loss(wl->vif);
 
+	/* Prevent spurious TX during FW restart */
+	ieee80211_stop_queues(wl->hw);
+
 	/* reboot the chipset */
-	__wl1271_op_remove_interface(wl);
+	__wl1271_op_remove_interface(wl, false);
 	ieee80211_restart_hw(wl->hw);
 
+	/*
+	 * Its safe to enable TX now - the queues are stopped after a request
+	 * to restart the HW.
+	 */
+	ieee80211_wake_queues(wl->hw);
+
 out:
 	mutex_unlock(&wl->mutex);
 }
@@ -1479,7 +1489,8 @@ out:
 	return ret;
 }
 
-static void __wl1271_op_remove_interface(struct wl1271 *wl)
+static void __wl1271_op_remove_interface(struct wl1271 *wl,
+					 bool reset_tx_queues)
 {
 	int i;
 
@@ -1525,7 +1536,7 @@ static void __wl1271_op_remove_interface(struct wl1271 *wl)
 	mutex_lock(&wl->mutex);
 
 	/* let's notify MAC80211 about the remaining pending TX frames */
-	wl1271_tx_reset(wl);
+	wl1271_tx_reset(wl, reset_tx_queues);
 	wl1271_power_off(wl);
 
 	memset(wl->bssid, 0, ETH_ALEN);
@@ -1586,7 +1597,7 @@ static void wl1271_op_remove_interface(struct ieee80211_hw *hw,
 	 */
 	if (wl->vif) {
 		WARN_ON(wl->vif != vif);
-		__wl1271_op_remove_interface(wl);
+		__wl1271_op_remove_interface(wl, true);
 	}
 
 	mutex_unlock(&wl->mutex);
diff --git a/drivers/net/wireless/wl12xx/tx.c b/drivers/net/wireless/wl12xx/tx.c
index cc837bba546..ca3ab1c1ace 100644
--- a/drivers/net/wireless/wl12xx/tx.c
+++ b/drivers/net/wireless/wl12xx/tx.c
@@ -769,8 +769,8 @@ void wl1271_tx_reset_link_queues(struct wl1271 *wl, u8 hlid)
 	wl1271_handle_tx_low_watermark(wl);
 }
 
-/* caller must hold wl->mutex */
-void wl1271_tx_reset(struct wl1271 *wl)
+/* caller must hold wl->mutex and TX must be stopped */
+void wl1271_tx_reset(struct wl1271 *wl, bool reset_tx_queues)
 {
 	int i;
 	struct sk_buff *skb;
@@ -806,8 +806,10 @@ void wl1271_tx_reset(struct wl1271 *wl)
 	/*
 	 * Make sure the driver is at a consistent state, in case this
 	 * function is called from a context other than interface removal.
+	 * This call will always wake the TX queues.
 	 */
-	wl1271_handle_tx_low_watermark(wl);
+	if (reset_tx_queues)
+		wl1271_handle_tx_low_watermark(wl);
 
 	for (i = 0; i < ACX_TX_DESCRIPTORS; i++) {
 		if (wl->tx_frames[i] == NULL)
diff --git a/drivers/net/wireless/wl12xx/tx.h b/drivers/net/wireless/wl12xx/tx.h
index fc7835c4cf6..832f9258d67 100644
--- a/drivers/net/wireless/wl12xx/tx.h
+++ b/drivers/net/wireless/wl12xx/tx.h
@@ -185,7 +185,7 @@ static inline int wl1271_tx_get_queue(int queue)
 void wl1271_tx_work(struct work_struct *work);
 void wl1271_tx_work_locked(struct wl1271 *wl);
 void wl1271_tx_complete(struct wl1271 *wl);
-void wl1271_tx_reset(struct wl1271 *wl);
+void wl1271_tx_reset(struct wl1271 *wl, bool reset_tx_queues);
 void wl1271_tx_flush(struct wl1271 *wl);
 u8 wl1271_rate_to_idx(int rate, enum ieee80211_band band);
 u32 wl1271_tx_enabled_rates_get(struct wl1271 *wl, u32 rate_set);
-- 
cgit v1.2.3-70-g09d2


From 2d66bee7fbd38d28e9ed12f45b8e9db8e6aa0c49 Mon Sep 17 00:00:00 2001
From: Arik Nemtsov <arik@wizery.com>
Date: Mon, 18 Apr 2011 14:15:29 +0300
Subject: wl12xx: export driver state to debugfs

By reading the "driver_state" debugfs value we get all the important
state information from the wl12xx driver. This helps testing and
debugging, particularly in situations where the driver seems "stuck".

Signed-off-by: Arik Nemtsov <arik@wizery.com>
Signed-off-by: Luciano Coelho <coelho@ti.com>
---
 drivers/net/wireless/wl12xx/debugfs.c | 87 +++++++++++++++++++++++++++++++++++
 1 file changed, 87 insertions(+)

(limited to 'drivers/net/wireless/wl12xx')

diff --git a/drivers/net/wireless/wl12xx/debugfs.c b/drivers/net/wireless/wl12xx/debugfs.c
index a2b55e55671..b2f692babed 100644
--- a/drivers/net/wireless/wl12xx/debugfs.c
+++ b/drivers/net/wireless/wl12xx/debugfs.c
@@ -310,6 +310,92 @@ static const struct file_operations start_recovery_ops = {
 	.llseek = default_llseek,
 };
 
+static ssize_t driver_state_read(struct file *file, char __user *user_buf,
+				 size_t count, loff_t *ppos)
+{
+	struct wl1271 *wl = file->private_data;
+	int res = 0;
+	char buf[1024];
+
+	mutex_lock(&wl->mutex);
+
+#define DRIVER_STATE_PRINT(x, fmt)   \
+	(res += scnprintf(buf + res, sizeof(buf) - res,\
+			  #x " = " fmt "\n", wl->x))
+
+#define DRIVER_STATE_PRINT_LONG(x) DRIVER_STATE_PRINT(x, "%ld")
+#define DRIVER_STATE_PRINT_INT(x)  DRIVER_STATE_PRINT(x, "%d")
+#define DRIVER_STATE_PRINT_STR(x)  DRIVER_STATE_PRINT(x, "%s")
+#define DRIVER_STATE_PRINT_LHEX(x) DRIVER_STATE_PRINT(x, "0x%lx")
+#define DRIVER_STATE_PRINT_HEX(x)  DRIVER_STATE_PRINT(x, "0x%x")
+
+	DRIVER_STATE_PRINT_INT(tx_blocks_available);
+	DRIVER_STATE_PRINT_INT(tx_allocated_blocks);
+	DRIVER_STATE_PRINT_INT(tx_frames_cnt);
+	DRIVER_STATE_PRINT_LHEX(tx_frames_map[0]);
+	DRIVER_STATE_PRINT_INT(tx_queue_count);
+	DRIVER_STATE_PRINT_INT(tx_packets_count);
+	DRIVER_STATE_PRINT_INT(tx_results_count);
+	DRIVER_STATE_PRINT_LHEX(flags);
+	DRIVER_STATE_PRINT_INT(tx_blocks_freed[0]);
+	DRIVER_STATE_PRINT_INT(tx_blocks_freed[1]);
+	DRIVER_STATE_PRINT_INT(tx_blocks_freed[2]);
+	DRIVER_STATE_PRINT_INT(tx_blocks_freed[3]);
+	DRIVER_STATE_PRINT_INT(tx_security_last_seq);
+	DRIVER_STATE_PRINT_INT(rx_counter);
+	DRIVER_STATE_PRINT_INT(session_counter);
+	DRIVER_STATE_PRINT_INT(state);
+	DRIVER_STATE_PRINT_INT(bss_type);
+	DRIVER_STATE_PRINT_INT(channel);
+	DRIVER_STATE_PRINT_HEX(rate_set);
+	DRIVER_STATE_PRINT_HEX(basic_rate_set);
+	DRIVER_STATE_PRINT_HEX(basic_rate);
+	DRIVER_STATE_PRINT_INT(band);
+	DRIVER_STATE_PRINT_INT(beacon_int);
+	DRIVER_STATE_PRINT_INT(psm_entry_retry);
+	DRIVER_STATE_PRINT_INT(ps_poll_failures);
+	DRIVER_STATE_PRINT_HEX(filters);
+	DRIVER_STATE_PRINT_HEX(rx_config);
+	DRIVER_STATE_PRINT_HEX(rx_filter);
+	DRIVER_STATE_PRINT_INT(power_level);
+	DRIVER_STATE_PRINT_INT(rssi_thold);
+	DRIVER_STATE_PRINT_INT(last_rssi_event);
+	DRIVER_STATE_PRINT_INT(sg_enabled);
+	DRIVER_STATE_PRINT_INT(enable_11a);
+	DRIVER_STATE_PRINT_INT(noise);
+	DRIVER_STATE_PRINT_LHEX(ap_hlid_map[0]);
+	DRIVER_STATE_PRINT_INT(last_tx_hlid);
+	DRIVER_STATE_PRINT_INT(ba_support);
+	DRIVER_STATE_PRINT_HEX(ba_rx_bitmap);
+	DRIVER_STATE_PRINT_HEX(ap_fw_ps_map);
+	DRIVER_STATE_PRINT_LHEX(ap_ps_map);
+	DRIVER_STATE_PRINT_HEX(quirks);
+	DRIVER_STATE_PRINT_HEX(irq);
+	DRIVER_STATE_PRINT_HEX(ref_clock);
+	DRIVER_STATE_PRINT_HEX(tcxo_clock);
+	DRIVER_STATE_PRINT_HEX(hw_pg_ver);
+	DRIVER_STATE_PRINT_HEX(platform_quirks);
+	DRIVER_STATE_PRINT_HEX(chip.id);
+	DRIVER_STATE_PRINT_STR(chip.fw_ver_str);
+
+#undef DRIVER_STATE_PRINT_INT
+#undef DRIVER_STATE_PRINT_LONG
+#undef DRIVER_STATE_PRINT_HEX
+#undef DRIVER_STATE_PRINT_LHEX
+#undef DRIVER_STATE_PRINT_STR
+#undef DRIVER_STATE_PRINT
+
+	mutex_unlock(&wl->mutex);
+
+	return simple_read_from_buffer(user_buf, count, ppos, buf, res);
+}
+
+static const struct file_operations driver_state_ops = {
+	.read = driver_state_read,
+	.open = wl1271_open_file_generic,
+	.llseek = default_llseek,
+};
+
 static ssize_t dtim_interval_read(struct file *file, char __user *user_buf,
 				  size_t count, loff_t *ppos)
 {
@@ -549,6 +635,7 @@ static int wl1271_debugfs_add_files(struct wl1271 *wl,
 
 	DEBUGFS_ADD(gpio_power, rootdir);
 	DEBUGFS_ADD(start_recovery, rootdir);
+	DEBUGFS_ADD(driver_state, rootdir);
 	DEBUGFS_ADD(dtim_interval, rootdir);
 	DEBUGFS_ADD(beacon_interval, rootdir);
 
-- 
cgit v1.2.3-70-g09d2


From 25eaea30cd7b009ba2ca693708330d2f395cbc4d Mon Sep 17 00:00:00 2001
From: Luciano Coelho <coelho@ti.com>
Date: Mon, 2 May 2011 12:37:33 +0300
Subject: Revert "wl12xx: support FW TX inactivity triggers"

This reverts commit 47684808fd89d6809c0886e06f8ac324252499d8.

Conflicts:

	drivers/net/wireless/wl12xx/conf.h
	drivers/net/wireless/wl12xx/main.c
---
 drivers/net/wireless/wl12xx/acx.c    | 34 ++++----------------------
 drivers/net/wireless/wl12xx/acx.h    | 12 ++-------
 drivers/net/wireless/wl12xx/boot.c   |  6 ++---
 drivers/net/wireless/wl12xx/cmd.c    |  2 +-
 drivers/net/wireless/wl12xx/conf.h   | 12 ++-------
 drivers/net/wireless/wl12xx/event.c  | 47 ------------------------------------
 drivers/net/wireless/wl12xx/event.h  | 12 +--------
 drivers/net/wireless/wl12xx/init.c   |  6 +----
 drivers/net/wireless/wl12xx/main.c   | 10 ++------
 drivers/net/wireless/wl12xx/wl12xx.h |  1 +
 10 files changed, 17 insertions(+), 125 deletions(-)

(limited to 'drivers/net/wireless/wl12xx')

diff --git a/drivers/net/wireless/wl12xx/acx.c b/drivers/net/wireless/wl12xx/acx.c
index ec0156b3e27..c6ee530e5bf 100644
--- a/drivers/net/wireless/wl12xx/acx.c
+++ b/drivers/net/wireless/wl12xx/acx.c
@@ -1577,46 +1577,22 @@ out:
 	return ret;
 }
 
-int wl1271_acx_ap_max_tx_retry(struct wl1271 *wl)
+int wl1271_acx_max_tx_retry(struct wl1271 *wl)
 {
-	struct wl1271_acx_ap_max_tx_retry *acx = NULL;
+	struct wl1271_acx_max_tx_retry *acx = NULL;
 	int ret;
 
-	wl1271_debug(DEBUG_ACX, "acx ap max tx retry");
+	wl1271_debug(DEBUG_ACX, "acx max tx retry");
 
 	acx = kzalloc(sizeof(*acx), GFP_KERNEL);
 	if (!acx)
 		return -ENOMEM;
 
-	acx->max_tx_retry = cpu_to_le16(wl->conf.tx.max_tx_retries);
+	acx->max_tx_retry = cpu_to_le16(wl->conf.tx.ap_max_tx_retries);
 
 	ret = wl1271_cmd_configure(wl, ACX_MAX_TX_FAILURE, acx, sizeof(*acx));
 	if (ret < 0) {
-		wl1271_warning("acx ap max tx retry failed: %d", ret);
-		goto out;
-	}
-
-out:
-	kfree(acx);
-	return ret;
-}
-
-int wl1271_acx_sta_max_tx_retry(struct wl1271 *wl)
-{
-	struct wl1271_acx_sta_max_tx_retry *acx = NULL;
-	int ret;
-
-	wl1271_debug(DEBUG_ACX, "acx sta max tx retry");
-
-	acx = kzalloc(sizeof(*acx), GFP_KERNEL);
-	if (!acx)
-		return -ENOMEM;
-
-	acx->max_tx_retry = wl->conf.tx.max_tx_retries;
-
-	ret = wl1271_cmd_configure(wl, ACX_CONS_TX_FAILURE, acx, sizeof(*acx));
-	if (ret < 0) {
-		wl1271_warning("acx sta max tx retry failed: %d", ret);
+		wl1271_warning("acx max tx retry failed: %d", ret);
 		goto out;
 	}
 
diff --git a/drivers/net/wireless/wl12xx/acx.h b/drivers/net/wireless/wl12xx/acx.h
index 75338f9947c..9a895e3cc61 100644
--- a/drivers/net/wireless/wl12xx/acx.h
+++ b/drivers/net/wireless/wl12xx/acx.h
@@ -1153,7 +1153,7 @@ struct wl1271_acx_fw_tsf_information {
 	u8 padding[3];
 } __packed;
 
-struct wl1271_acx_ap_max_tx_retry {
+struct wl1271_acx_max_tx_retry {
 	struct acx_header header;
 
 	/*
@@ -1164,13 +1164,6 @@ struct wl1271_acx_ap_max_tx_retry {
 	u8 padding_1[2];
 } __packed;
 
-struct wl1271_acx_sta_max_tx_retry {
-	struct acx_header header;
-
-	u8 max_tx_retry;
-	u8 padding_1[3];
-} __packed;
-
 struct wl1271_acx_config_ps {
 	struct acx_header header;
 
@@ -1391,8 +1384,7 @@ int wl1271_acx_set_ba_session(struct wl1271 *wl,
 int wl1271_acx_set_ba_receiver_session(struct wl1271 *wl, u8 tid_index, u16 ssn,
 				       bool enable);
 int wl1271_acx_tsf_info(struct wl1271 *wl, u64 *mactime);
-int wl1271_acx_ap_max_tx_retry(struct wl1271 *wl);
-int wl1271_acx_sta_max_tx_retry(struct wl1271 *wl);
+int wl1271_acx_max_tx_retry(struct wl1271 *wl);
 int wl1271_acx_config_ps(struct wl1271 *wl);
 int wl1271_acx_set_inconnection_sta(struct wl1271 *wl, u8 *addr);
 int wl1271_acx_set_ap_beacon_filter(struct wl1271 *wl, bool enable);
diff --git a/drivers/net/wireless/wl12xx/boot.c b/drivers/net/wireless/wl12xx/boot.c
index d263ebb6f97..2b0cf85788b 100644
--- a/drivers/net/wireless/wl12xx/boot.c
+++ b/drivers/net/wireless/wl12xx/boot.c
@@ -478,12 +478,10 @@ static int wl1271_boot_run_firmware(struct wl1271 *wl)
 		DISCONNECT_EVENT_COMPLETE_ID |
 		RSSI_SNR_TRIGGER_0_EVENT_ID |
 		PSPOLL_DELIVERY_FAILURE_EVENT_ID |
-		SOFT_GEMINI_SENSE_EVENT_ID |
-		MAX_TX_RETRY_EVENT_ID;
+		SOFT_GEMINI_SENSE_EVENT_ID;
 
 	if (wl->bss_type == BSS_TYPE_AP_BSS)
-		wl->event_mask |= STA_REMOVE_COMPLETE_EVENT_ID |
-				  INACTIVE_STA_EVENT_ID;
+		wl->event_mask |= STA_REMOVE_COMPLETE_EVENT_ID;
 	else
 		wl->event_mask |= DUMMY_PACKET_EVENT_ID;
 
diff --git a/drivers/net/wireless/wl12xx/cmd.c b/drivers/net/wireless/wl12xx/cmd.c
index d8596ae3a64..2116a376c3f 100644
--- a/drivers/net/wireless/wl12xx/cmd.c
+++ b/drivers/net/wireless/wl12xx/cmd.c
@@ -1080,7 +1080,7 @@ int wl1271_cmd_start_bss(struct wl1271 *wl)
 
 	memcpy(cmd->bssid, bss_conf->bssid, ETH_ALEN);
 
-	cmd->aging_period = cpu_to_le16(wl->conf.tx.ap_aging_period);
+	cmd->aging_period = cpu_to_le16(WL1271_AP_DEF_INACTIV_SEC);
 	cmd->bss_index = WL1271_AP_BSS_INDEX;
 	cmd->global_hlid = WL1271_AP_GLOBAL_HLID;
 	cmd->broadcast_hlid = WL1271_AP_BROADCAST_HLID;
diff --git a/drivers/net/wireless/wl12xx/conf.h b/drivers/net/wireless/wl12xx/conf.h
index c0045f0b8b4..1f947368f9e 100644
--- a/drivers/net/wireless/wl12xx/conf.h
+++ b/drivers/net/wireless/wl12xx/conf.h
@@ -711,18 +711,10 @@ struct conf_tx_settings {
 	struct conf_tx_ac_category ac_conf[CONF_TX_MAX_AC_COUNT];
 
 	/*
-	 * Allow this number of TX retries to a connected station/AP before an
+	 * AP-mode - allow this number of TX retries to a station before an
 	 * event is triggered from FW.
-	 * In AP-mode the hlids of unreachable stations are given in the
-	 * "sta_tx_retry_exceeded" member in the event mailbox.
 	 */
-	u8 max_tx_retries;
-
-	/*
-	 * AP-mode - after this number of seconds a connected station is
-	 * considered inactive.
-	 */
-	u16 ap_aging_period;
+	u16 ap_max_tx_retries;
 
 	/*
 	 * Configuration for TID parameters.
diff --git a/drivers/net/wireless/wl12xx/event.c b/drivers/net/wireless/wl12xx/event.c
index d7be3aec6fc..ae69330e807 100644
--- a/drivers/net/wireless/wl12xx/event.c
+++ b/drivers/net/wireless/wl12xx/event.c
@@ -174,8 +174,6 @@ static int wl1271_event_process(struct wl1271 *wl, struct event_mailbox *mbox)
 	u32 vector;
 	bool beacon_loss = false;
 	bool is_ap = (wl->bss_type == BSS_TYPE_AP_BSS);
-	bool disconnect_sta = false;
-	unsigned long sta_bitmap = 0;
 
 	wl1271_event_mbox_dump(mbox);
 
@@ -237,54 +235,9 @@ static int wl1271_event_process(struct wl1271 *wl, struct event_mailbox *mbox)
 			wl1271_tx_dummy_packet(wl);
 	}
 
-	/*
-	 * "TX retries exceeded" has a different meaning according to mode.
-	 * In AP mode the offending station is disconnected. In STA mode we
-	 * report connection loss.
-	 */
-	if (vector & MAX_TX_RETRY_EVENT_ID) {
-		wl1271_debug(DEBUG_EVENT, "MAX_TX_RETRY_EVENT_ID");
-		if (is_ap) {
-			sta_bitmap |= le16_to_cpu(mbox->sta_tx_retry_exceeded);
-			disconnect_sta = true;
-		} else {
-			beacon_loss = true;
-		}
-	}
-
-	if ((vector & INACTIVE_STA_EVENT_ID) && is_ap) {
-		wl1271_debug(DEBUG_EVENT, "INACTIVE_STA_EVENT_ID");
-		sta_bitmap |= le16_to_cpu(mbox->sta_aging_status);
-		disconnect_sta = true;
-	}
-
 	if (wl->vif && beacon_loss)
 		ieee80211_connection_loss(wl->vif);
 
-	if (is_ap && disconnect_sta) {
-		u32 num_packets = wl->conf.tx.max_tx_retries;
-		struct ieee80211_sta *sta;
-		const u8 *addr;
-		int h;
-
-		for (h = find_first_bit(&sta_bitmap, AP_MAX_LINKS);
-		     h < AP_MAX_LINKS;
-		     h = find_next_bit(&sta_bitmap, AP_MAX_LINKS, h+1)) {
-			if (!wl1271_is_active_sta(wl, h))
-				continue;
-
-			addr = wl->links[h].addr;
-
-			rcu_read_lock();
-			sta = ieee80211_find_sta(wl->vif, addr);
-			if (sta) {
-				wl1271_debug(DEBUG_EVENT, "remove sta %d", h);
-				ieee80211_report_low_ack(sta, num_packets);
-			}
-			rcu_read_unlock();
-		}
-	}
-
 	return 0;
 }
 
diff --git a/drivers/net/wireless/wl12xx/event.h b/drivers/net/wireless/wl12xx/event.h
index 7ae5a082124..b6cf06e565a 100644
--- a/drivers/net/wireless/wl12xx/event.h
+++ b/drivers/net/wireless/wl12xx/event.h
@@ -58,16 +58,13 @@ enum {
 	CHANNEL_SWITCH_COMPLETE_EVENT_ID	 = BIT(17),
 	BSS_LOSE_EVENT_ID			 = BIT(18),
 	REGAINED_BSS_EVENT_ID			 = BIT(19),
-	MAX_TX_RETRY_EVENT_ID			 = BIT(20),
+	ROAMING_TRIGGER_MAX_TX_RETRY_EVENT_ID	 = BIT(20),
 	/* STA: dummy paket for dynamic mem blocks */
 	DUMMY_PACKET_EVENT_ID                    = BIT(21),
 	/* AP: STA remove complete */
 	STA_REMOVE_COMPLETE_EVENT_ID             = BIT(21),
 	SOFT_GEMINI_SENSE_EVENT_ID		 = BIT(22),
-	/* STA: SG prediction */
 	SOFT_GEMINI_PREDICTION_EVENT_ID		 = BIT(23),
-	/* AP: Inactive STA */
-	INACTIVE_STA_EVENT_ID			 = BIT(23),
 	SOFT_GEMINI_AVALANCHE_EVENT_ID		 = BIT(24),
 	PLT_RX_CALIBRATION_COMPLETE_EVENT_ID	 = BIT(25),
 	DBG_EVENT_ID				 = BIT(26),
@@ -122,11 +119,7 @@ struct event_mailbox {
 
 	/* AP FW only */
 	u8 hlid_removed;
-
-	/* a bitmap of hlids for stations that have been inactive too long */
 	__le16 sta_aging_status;
-
-	/* a bitmap of hlids for stations which didn't respond to TX */
 	__le16 sta_tx_retry_exceeded;
 
 	u8 reserved_5[24];
@@ -137,7 +130,4 @@ void wl1271_event_mbox_config(struct wl1271 *wl);
 int wl1271_event_handle(struct wl1271 *wl, u8 mbox);
 void wl1271_pspoll_work(struct work_struct *work);
 
-/* Functions from main.c */
-bool wl1271_is_active_sta(struct wl1271 *wl, u8 hlid);
-
 #endif
diff --git a/drivers/net/wireless/wl12xx/init.c b/drivers/net/wireless/wl12xx/init.c
index b1242a6de27..a8f4f156c05 100644
--- a/drivers/net/wireless/wl12xx/init.c
+++ b/drivers/net/wireless/wl12xx/init.c
@@ -378,10 +378,6 @@ static int wl1271_sta_hw_init(struct wl1271 *wl)
 	if (ret < 0)
 		return ret;
 
-	ret = wl1271_acx_sta_max_tx_retry(wl);
-	if (ret < 0)
-		return ret;
-
 	ret = wl1271_acx_sta_mem_cfg(wl);
 	if (ret < 0)
 		return ret;
@@ -432,7 +428,7 @@ static int wl1271_ap_hw_init(struct wl1271 *wl)
 	if (ret < 0)
 		return ret;
 
-	ret = wl1271_acx_ap_max_tx_retry(wl);
+	ret = wl1271_acx_max_tx_retry(wl);
 	if (ret < 0)
 		return ret;
 
diff --git a/drivers/net/wireless/wl12xx/main.c b/drivers/net/wireless/wl12xx/main.c
index 6dd42c98766..6dab6f0c91b 100644
--- a/drivers/net/wireless/wl12xx/main.c
+++ b/drivers/net/wireless/wl12xx/main.c
@@ -209,8 +209,7 @@ static struct conf_drv_settings default_conf = {
 				.tx_op_limit = 1504,
 			},
 		},
-		.max_tx_retries = 100,
-		.ap_aging_period = 300,
+		.ap_max_tx_retries = 100,
 		.tid_conf_count = 4,
 		.tid_conf = {
 			[CONF_TX_AC_BE] = {
@@ -3021,12 +3020,6 @@ static void wl1271_free_sta(struct wl1271 *wl, u8 hlid)
 	__clear_bit(hlid, (unsigned long *)&wl->ap_fw_ps_map);
 }
 
-bool wl1271_is_active_sta(struct wl1271 *wl, u8 hlid)
-{
-	int id = hlid - WL1271_AP_STA_HLID_START;
-	return test_bit(id, wl->ap_hlid_map);
-}
-
 static int wl1271_op_sta_add(struct ieee80211_hw *hw,
 			     struct ieee80211_vif *vif,
 			     struct ieee80211_sta *sta)
@@ -3632,6 +3625,7 @@ int wl1271_init_ieee80211(struct wl1271 *wl)
 		IEEE80211_HW_HAS_RATE_CONTROL |
 		IEEE80211_HW_CONNECTION_MONITOR |
 		IEEE80211_HW_SUPPORTS_CQM_RSSI |
+		IEEE80211_HW_REPORTS_TX_ACK_STATUS |
 		IEEE80211_HW_AP_LINK_PS;
 
 	wl->hw->wiphy->cipher_suites = cipher_suites;
diff --git a/drivers/net/wireless/wl12xx/wl12xx.h b/drivers/net/wireless/wl12xx/wl12xx.h
index f3de96212b9..b7601438eca 100644
--- a/drivers/net/wireless/wl12xx/wl12xx.h
+++ b/drivers/net/wireless/wl12xx/wl12xx.h
@@ -172,6 +172,7 @@ extern u32 wl12xx_debug_level;
 #define WL1271_PS_STA_MAX_BLOCKS  (2 * 9)
 
 #define WL1271_AP_BSS_INDEX        0
+#define WL1271_AP_DEF_INACTIV_SEC  300
 #define WL1271_AP_DEF_BEACON_EXP   20
 
 #define ACX_TX_DESCRIPTORS         32
-- 
cgit v1.2.3-70-g09d2


From 889cb360b4f48c1334311093161f06f7b4bd77d2 Mon Sep 17 00:00:00 2001
From: Eliad Peller <eliad@wizery.com>
Date: Sun, 1 May 2011 09:56:45 +0300
Subject: wl12xx: simplify wl1271_ssid_set()

Simplify wl1271_ssid_set by re-using cfg80211_find_ie instead of
reimplementing it.

Additionally, add a length check to prevent a potential buffer overflow.

Signed-off-by: Eliad Peller <eliad@wizery.com>
Signed-off-by: Luciano Coelho <coelho@ti.com>
---
 drivers/net/wireless/wl12xx/main.c | 26 +++++++++++++++-----------
 1 file changed, 15 insertions(+), 11 deletions(-)

(limited to 'drivers/net/wireless/wl12xx')

diff --git a/drivers/net/wireless/wl12xx/main.c b/drivers/net/wireless/wl12xx/main.c
index 6dab6f0c91b..f82e736ba19 100644
--- a/drivers/net/wireless/wl12xx/main.c
+++ b/drivers/net/wireless/wl12xx/main.c
@@ -2376,20 +2376,24 @@ out:
 static int wl1271_ssid_set(struct wl1271 *wl, struct sk_buff *skb,
 			    int offset)
 {
-	u8 *ptr = skb->data + offset;
+	u8 ssid_len;
+	const u8 *ptr = cfg80211_find_ie(WLAN_EID_SSID, skb->data + offset,
+					 skb->len - offset);
 
-	/* find the location of the ssid in the beacon */
-	while (ptr < skb->data + skb->len) {
-		if (ptr[0] == WLAN_EID_SSID) {
-			wl->ssid_len = ptr[1];
-			memcpy(wl->ssid, ptr+2, wl->ssid_len);
-			return 0;
-		}
-		ptr += (ptr[1] + 2);
+	if (!ptr) {
+		wl1271_error("No SSID in IEs!");
+		return -ENOENT;
 	}
 
-	wl1271_error("No SSID in IEs!\n");
-	return -ENOENT;
+	ssid_len = ptr[1];
+	if (ssid_len > IEEE80211_MAX_SSID_LEN) {
+		wl1271_error("SSID is too long!");
+		return -EINVAL;
+	}
+
+	wl->ssid_len = ssid_len;
+	memcpy(wl->ssid, ptr+2, ssid_len);
+	return 0;
 }
 
 static int wl1271_bss_erp_info_changed(struct wl1271 *wl,
-- 
cgit v1.2.3-70-g09d2


From bc76b94051983b94c8ba04fbfbc59651b9925fa7 Mon Sep 17 00:00:00 2001
From: Shahar Levi <shahar_levi@ti.com>
Date: Wed, 11 May 2011 11:14:22 +0300
Subject: wl12xx: Don't filter beacons that include changed HT IEs

This patch adds a beacon filter rule to pass up the beacons that
contain changed HT information elements.  These beacons need to be
passed to mac80211 so that it can act on such changes.

[Reworded commit log -- Luca.]

Signed-off-by: Shahar Levi <shahar_levi@ti.com>
Signed-off-by: Luciano Coelho <coelho@ti.com>
---
 drivers/net/wireless/wl12xx/main.c | 8 ++++++--
 1 file changed, 6 insertions(+), 2 deletions(-)

(limited to 'drivers/net/wireless/wl12xx')

diff --git a/drivers/net/wireless/wl12xx/main.c b/drivers/net/wireless/wl12xx/main.c
index f82e736ba19..fa6b996d7d4 100644
--- a/drivers/net/wireless/wl12xx/main.c
+++ b/drivers/net/wireless/wl12xx/main.c
@@ -257,12 +257,16 @@ static struct conf_drv_settings default_conf = {
 		.wake_up_event               = CONF_WAKE_UP_EVENT_DTIM,
 		.listen_interval             = 1,
 		.bcn_filt_mode               = CONF_BCN_FILT_MODE_ENABLED,
-		.bcn_filt_ie_count           = 1,
+		.bcn_filt_ie_count           = 2,
 		.bcn_filt_ie = {
 			[0] = {
 				.ie          = WLAN_EID_CHANNEL_SWITCH,
 				.rule        = CONF_BCN_RULE_PASS_ON_APPEARANCE,
-			}
+			},
+			[1] = {
+				.ie          = WLAN_EID_HT_INFORMATION,
+				.rule        = CONF_BCN_RULE_PASS_ON_CHANGE,
+			},
 		},
 		.synch_fail_thold            = 10,
 		.bss_lose_timeout            = 100,
-- 
cgit v1.2.3-70-g09d2


From fcd23b6305e98f5ad3ddd7ff3f5081c75fcd4367 Mon Sep 17 00:00:00 2001
From: Shahar Levi <shahar_levi@ti.com>
Date: Wed, 11 May 2011 12:12:56 +0300
Subject: wl12xx: add IEEE80211_HW_SPECTRUM_MGMT bit to the hw flags

Set the spectrum management bit in the hw flags so that mac80211 will
set the WLAN_CAPABILITY_SPECTRUM_MGMT bit in association requests
(which in practice means that we support 802.11h spectrum management).

[Reworded the commit log -- Luca.]

Signed-off-by: Shahar Levi <shahar_levi@ti.com>
Signed-off-by: Luciano Coelho <coelho@ti.com>
---
 drivers/net/wireless/wl12xx/main.c | 1 +
 1 file changed, 1 insertion(+)

(limited to 'drivers/net/wireless/wl12xx')

diff --git a/drivers/net/wireless/wl12xx/main.c b/drivers/net/wireless/wl12xx/main.c
index fa6b996d7d4..acfbbfd3b7d 100644
--- a/drivers/net/wireless/wl12xx/main.c
+++ b/drivers/net/wireless/wl12xx/main.c
@@ -3634,6 +3634,7 @@ int wl1271_init_ieee80211(struct wl1271 *wl)
 		IEEE80211_HW_CONNECTION_MONITOR |
 		IEEE80211_HW_SUPPORTS_CQM_RSSI |
 		IEEE80211_HW_REPORTS_TX_ACK_STATUS |
+		IEEE80211_HW_SPECTRUM_MGMT |
 		IEEE80211_HW_AP_LINK_PS;
 
 	wl->hw->wiphy->cipher_suites = cipher_suites;
-- 
cgit v1.2.3-70-g09d2


From 3a9d60e5bd72f9533b05d39278fec50b181dbdd2 Mon Sep 17 00:00:00 2001
From: Luciano Coelho <coelho@ti.com>
Date: Tue, 10 May 2011 14:06:31 +0300
Subject: wl12xx: add configuration values for scheduled scan

Add the structures and values for driver-configured scheduled scan
parameters.

Signed-off-by: Luciano Coelho <coelho@ti.com>
---
 drivers/net/wireless/wl12xx/conf.h | 21 +++++++++++++++++++++
 drivers/net/wireless/wl12xx/main.c |  9 +++++++++
 2 files changed, 30 insertions(+)

(limited to 'drivers/net/wireless/wl12xx')

diff --git a/drivers/net/wireless/wl12xx/conf.h b/drivers/net/wireless/wl12xx/conf.h
index 1f947368f9e..ba558fcc76d 100644
--- a/drivers/net/wireless/wl12xx/conf.h
+++ b/drivers/net/wireless/wl12xx/conf.h
@@ -1147,6 +1147,26 @@ struct conf_scan_settings {
 
 };
 
+struct conf_sched_scan_settings {
+	/* minimum time to wait on the channel for active scans (in TUs) */
+	u16 min_dwell_time_active;
+
+	/* maximum time to wait on the channel for active scans (in TUs) */
+	u16 max_dwell_time_active;
+
+	/* time to wait on the channel for passive scans (in TUs) */
+	u32 dwell_time_passive;
+
+	/* number of probe requests to send on each channel in active scans */
+	u8 num_probe_reqs;
+
+	/* RSSI threshold to be used for filtering */
+	s8 rssi_threshold;
+
+	/* SNR threshold to be used for filtering */
+	s8 snr_threshold;
+};
+
 /* these are number of channels on the band divided by two, rounded up */
 #define CONF_TX_PWR_COMPENSATION_LEN_2 7
 #define CONF_TX_PWR_COMPENSATION_LEN_5 18
@@ -1234,6 +1254,7 @@ struct conf_drv_settings {
 	struct conf_pm_config_settings pm_config;
 	struct conf_roam_trigger_settings roam_trigger;
 	struct conf_scan_settings scan;
+	struct conf_sched_scan_settings sched_scan;
 	struct conf_rf_settings rf;
 	struct conf_ht_setting ht;
 	struct conf_memory_settings mem_wl127x;
diff --git a/drivers/net/wireless/wl12xx/main.c b/drivers/net/wireless/wl12xx/main.c
index acfbbfd3b7d..88d2e9052a0 100644
--- a/drivers/net/wireless/wl12xx/main.c
+++ b/drivers/net/wireless/wl12xx/main.c
@@ -306,6 +306,15 @@ static struct conf_drv_settings default_conf = {
 		.max_dwell_time_passive       = 100000,
 		.num_probe_reqs               = 2,
 	},
+	.sched_scan = {
+		/* sched_scan requires dwell times in TU instead of TU/1000 */
+		.min_dwell_time_active = 8,
+		.max_dwell_time_active = 30,
+		.dwell_time_passive    = 100,
+		.num_probe_reqs        = 2,
+		.rssi_threshold        = -90,
+		.snr_threshold         = 0,
+	},
 	.rf = {
 		.tx_per_channel_power_compensation_2 = {
 			0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-- 
cgit v1.2.3-70-g09d2


From 6394c01b61f8ab66a6af1a24ff05f2429130afcd Mon Sep 17 00:00:00 2001
From: Luciano Coelho <coelho@ti.com>
Date: Tue, 10 May 2011 14:28:27 +0300
Subject: wl12xx: listen to scheduled scan events

Subscribe and listen to PERIODIC_SCAN_REPORT_EVENT_ID and
PERIODIC_SCAN_COMPLETE_EVENT_ID in preparation for the scheduled scan
implementation.

Signed-off-by: Luciano Coelho <coelho@ti.com>
---
 drivers/net/wireless/wl12xx/boot.c  |  4 +++-
 drivers/net/wireless/wl12xx/event.c | 10 ++++++++++
 2 files changed, 13 insertions(+), 1 deletion(-)

(limited to 'drivers/net/wireless/wl12xx')

diff --git a/drivers/net/wireless/wl12xx/boot.c b/drivers/net/wireless/wl12xx/boot.c
index 2b0cf85788b..b07f8b7e5f1 100644
--- a/drivers/net/wireless/wl12xx/boot.c
+++ b/drivers/net/wireless/wl12xx/boot.c
@@ -478,7 +478,9 @@ static int wl1271_boot_run_firmware(struct wl1271 *wl)
 		DISCONNECT_EVENT_COMPLETE_ID |
 		RSSI_SNR_TRIGGER_0_EVENT_ID |
 		PSPOLL_DELIVERY_FAILURE_EVENT_ID |
-		SOFT_GEMINI_SENSE_EVENT_ID;
+		SOFT_GEMINI_SENSE_EVENT_ID |
+		PERIODIC_SCAN_REPORT_EVENT_ID |
+		PERIODIC_SCAN_COMPLETE_EVENT_ID;
 
 	if (wl->bss_type == BSS_TYPE_AP_BSS)
 		wl->event_mask |= STA_REMOVE_COMPLETE_EVENT_ID;
diff --git a/drivers/net/wireless/wl12xx/event.c b/drivers/net/wireless/wl12xx/event.c
index ae69330e807..dc110e8a618 100644
--- a/drivers/net/wireless/wl12xx/event.c
+++ b/drivers/net/wireless/wl12xx/event.c
@@ -188,6 +188,16 @@ static int wl1271_event_process(struct wl1271 *wl, struct event_mailbox *mbox)
 		wl1271_scan_stm(wl);
 	}
 
+	if (vector & PERIODIC_SCAN_REPORT_EVENT_ID) {
+		wl1271_debug(DEBUG_EVENT, "PERIODIC_SCAN_REPORT_EVENT "
+			     "(status 0x%0x)", mbox->scheduled_scan_status);
+	}
+
+	if (vector & PERIODIC_SCAN_COMPLETE_EVENT_ID) {
+		wl1271_debug(DEBUG_EVENT, "PERIODIC_SCAN_COMPLETE_EVENT "
+			     "(status 0x%0x)", mbox->scheduled_scan_status);
+	}
+
 	/* disable dynamic PS when requested by the firmware */
 	if (vector & SOFT_GEMINI_SENSE_EVENT_ID &&
 	    wl->bss_type == BSS_TYPE_STA_BSS) {
-- 
cgit v1.2.3-70-g09d2


From 95feadca6dca909ae0f6e65665b782c7ca9d5122 Mon Sep 17 00:00:00 2001
From: Luciano Coelho <coelho@ti.com>
Date: Tue, 10 May 2011 14:38:59 +0300
Subject: wl12xx: add scheduled scan structures and commands

Add firmware command structures, definitions and code to to configure,
start and stop scheduled scans.

Signed-off-by: Luciano Coelho <coelho@ti.com>
---
 drivers/net/wireless/wl12xx/scan.c | 233 +++++++++++++++++++++++++++++++++++++
 drivers/net/wireless/wl12xx/scan.h | 114 ++++++++++++++++++
 2 files changed, 347 insertions(+)

(limited to 'drivers/net/wireless/wl12xx')

diff --git a/drivers/net/wireless/wl12xx/scan.c b/drivers/net/wireless/wl12xx/scan.c
index 5d0544c8f3f..d78044f0081 100644
--- a/drivers/net/wireless/wl12xx/scan.c
+++ b/drivers/net/wireless/wl12xx/scan.c
@@ -320,3 +320,236 @@ int wl1271_scan(struct wl1271 *wl, const u8 *ssid, size_t ssid_len,
 
 	return 0;
 }
+
+static int
+wl1271_scan_get_sched_scan_channels(struct wl1271 *wl,
+				    struct cfg80211_sched_scan_request *req,
+				    struct conn_scan_ch_params *channels,
+				    u32 band, bool radar, bool passive,
+				    int start)
+{
+	struct conf_sched_scan_settings *c = &wl->conf.sched_scan;
+	int i, j;
+	u32 flags;
+
+	for (i = 0, j = start;
+	     i < req->n_channels && j < MAX_CHANNELS_ALL_BANDS;
+	     i++) {
+		flags = req->channels[i]->flags;
+
+		if (!(flags & IEEE80211_CHAN_DISABLED) &&
+		    ((flags & IEEE80211_CHAN_PASSIVE_SCAN) == passive) &&
+		    ((flags & IEEE80211_CHAN_RADAR) == radar) &&
+		    (req->channels[i]->band == band)) {
+			wl1271_debug(DEBUG_SCAN, "band %d, center_freq %d ",
+				     req->channels[i]->band,
+				     req->channels[i]->center_freq);
+			wl1271_debug(DEBUG_SCAN, "hw_value %d, flags %X",
+				     req->channels[i]->hw_value,
+				     req->channels[i]->flags);
+			wl1271_debug(DEBUG_SCAN, "max_power %d",
+				     req->channels[i]->max_power);
+
+			if (flags & IEEE80211_CHAN_PASSIVE_SCAN) {
+				channels[j].passive_duration =
+					cpu_to_le16(c->dwell_time_passive);
+			} else {
+				channels[j].min_duration =
+					cpu_to_le16(c->min_dwell_time_active);
+				channels[j].max_duration =
+					cpu_to_le16(c->max_dwell_time_active);
+			}
+			channels[j].tx_power_att = req->channels[j]->max_power;
+			channels[j].channel = req->channels[i]->hw_value;
+
+			j++;
+		}
+	}
+
+	return j - start;
+}
+
+static int
+wl1271_scan_sched_scan_channels(struct wl1271 *wl,
+				struct cfg80211_sched_scan_request *req,
+				struct wl1271_cmd_sched_scan_config *cfg)
+{
+	int idx = 0;
+
+	cfg->passive[0] =
+		wl1271_scan_get_sched_scan_channels(wl, req, cfg->channels,
+						    IEEE80211_BAND_2GHZ,
+						    false, true, idx);
+	idx += cfg->passive[0];
+
+	cfg->active[0] =
+		wl1271_scan_get_sched_scan_channels(wl, req, cfg->channels,
+						    IEEE80211_BAND_2GHZ,
+						    false, false, idx);
+	idx += cfg->active[0];
+
+	cfg->passive[1] =
+		wl1271_scan_get_sched_scan_channels(wl, req, cfg->channels,
+						    IEEE80211_BAND_5GHZ,
+						    false, true, idx);
+	idx += cfg->passive[1];
+
+	cfg->active[1] =
+		wl1271_scan_get_sched_scan_channels(wl, req, cfg->channels,
+						    IEEE80211_BAND_5GHZ,
+						    false, false, 14);
+	idx += cfg->active[1];
+
+	cfg->dfs =
+		wl1271_scan_get_sched_scan_channels(wl, req, cfg->channels,
+						    IEEE80211_BAND_5GHZ,
+						    true, false, idx);
+	idx += cfg->dfs;
+
+	wl1271_debug(DEBUG_SCAN, "    2.4GHz: active %d passive %d",
+		     cfg->active[0], cfg->passive[0]);
+	wl1271_debug(DEBUG_SCAN, "    5GHz: active %d passive %d",
+		     cfg->active[1], cfg->passive[1]);
+
+	return idx;
+}
+
+int wl1271_scan_sched_scan_config(struct wl1271 *wl,
+				  struct cfg80211_sched_scan_request *req,
+				  struct ieee80211_sched_scan_ies *ies)
+{
+	struct wl1271_cmd_sched_scan_config *cfg = NULL;
+	struct conf_sched_scan_settings *c = &wl->conf.sched_scan;
+	int i, total_channels, ret;
+
+	wl1271_debug(DEBUG_CMD, "cmd sched_scan scan config");
+
+	cfg = kzalloc(sizeof(*cfg), GFP_KERNEL);
+	if (!cfg)
+		return -ENOMEM;
+
+	cfg->rssi_threshold = c->rssi_threshold;
+	cfg->snr_threshold  = c->snr_threshold;
+	cfg->n_probe_reqs = c->num_probe_reqs;
+	/* cycles set to 0 it means infinite (until manually stopped) */
+	cfg->cycles = 0;
+	/* report APs when at least 1 is found */
+	cfg->report_after = 1;
+	/* don't stop scanning automatically when something is found */
+	cfg->terminate = 0;
+	cfg->tag = WL1271_SCAN_DEFAULT_TAG;
+	/* don't filter on BSS type */
+	cfg->bss_type = SCAN_BSS_TYPE_ANY;
+	/* currently NL80211 supports only a single interval */
+	for (i = 0; i < SCAN_MAX_CYCLE_INTERVALS; i++)
+		cfg->intervals[i] = cpu_to_le32(req->interval);
+
+	if (req->ssids[0].ssid_len && req->ssids[0].ssid) {
+		cfg->filter_type = SCAN_SSID_FILTER_SPECIFIC;
+		cfg->ssid_len = req->ssids[0].ssid_len;
+		memcpy(cfg->ssid, req->ssids[0].ssid,
+		       req->ssids[0].ssid_len);
+	} else {
+		cfg->filter_type = SCAN_SSID_FILTER_ANY;
+		cfg->ssid_len = 0;
+	}
+
+	total_channels = wl1271_scan_sched_scan_channels(wl, req, cfg);
+	if (total_channels == 0) {
+		wl1271_error("scan channel list is empty");
+		ret = -EINVAL;
+		goto out;
+	}
+
+	if (cfg->active[0]) {
+		ret = wl1271_cmd_build_probe_req(wl, req->ssids[0].ssid,
+						 req->ssids[0].ssid_len,
+						 ies->ie[IEEE80211_BAND_2GHZ],
+						 ies->len[IEEE80211_BAND_2GHZ],
+						 IEEE80211_BAND_2GHZ);
+		if (ret < 0) {
+			wl1271_error("2.4GHz PROBE request template failed");
+			goto out;
+		}
+	}
+
+	if (cfg->active[1]) {
+		ret = wl1271_cmd_build_probe_req(wl,  req->ssids[0].ssid,
+						 req->ssids[0].ssid_len,
+						 ies->ie[IEEE80211_BAND_5GHZ],
+						 ies->len[IEEE80211_BAND_5GHZ],
+						 IEEE80211_BAND_5GHZ);
+		if (ret < 0) {
+			wl1271_error("5GHz PROBE request template failed");
+			goto out;
+		}
+	}
+
+	wl1271_dump(DEBUG_SCAN, "SCAN_CFG: ", cfg, sizeof(*cfg));
+
+	ret = wl1271_cmd_send(wl, CMD_CONNECTION_SCAN_CFG, cfg,
+			      sizeof(*cfg), 0);
+	if (ret < 0) {
+		wl1271_error("SCAN configuration failed");
+		goto out;
+	}
+out:
+	kfree(cfg);
+	return ret;
+}
+
+int wl1271_scan_sched_scan_start(struct wl1271 *wl)
+{
+	struct wl1271_cmd_sched_scan_start *start;
+	int ret = 0;
+
+	wl1271_debug(DEBUG_CMD, "cmd periodic scan start");
+
+	start = kzalloc(sizeof(*start), GFP_KERNEL);
+	if (!start)
+		return -ENOMEM;
+
+	start->tag = WL1271_SCAN_DEFAULT_TAG;
+
+	ret = wl1271_cmd_send(wl, CMD_START_PERIODIC_SCAN, start,
+			      sizeof(*start), 0);
+	if (ret < 0) {
+		wl1271_error("failed to send scan start command");
+		goto out_free;
+	}
+
+out_free:
+	kfree(start);
+	return ret;
+}
+
+void wl1271_scan_sched_scan_results(struct wl1271 *wl)
+{
+	wl1271_debug(DEBUG_SCAN, "got periodic scan results");
+
+	ieee80211_sched_scan_results(wl->hw);
+}
+
+void wl1271_scan_sched_scan_stop(struct wl1271 *wl)
+{
+	struct wl1271_cmd_sched_scan_stop *stop;
+	int ret = 0;
+
+	wl1271_debug(DEBUG_CMD, "cmd periodic scan stop");
+
+	/* FIXME: what to do if alloc'ing to stop fails? */
+	stop = kzalloc(sizeof(*stop), GFP_KERNEL);
+	if (!stop) {
+		wl1271_error("failed to alloc memory to send sched scan stop");
+		return;
+	}
+
+	stop->tag = WL1271_SCAN_DEFAULT_TAG;
+
+	ret = wl1271_cmd_send(wl, CMD_STOP_PERIODIC_SCAN, stop,
+			      sizeof(*stop), 0);
+	if (ret < 0)
+		wl1271_error("failed to send sched scan stop command");
+
+	kfree(stop);
+}
diff --git a/drivers/net/wireless/wl12xx/scan.h b/drivers/net/wireless/wl12xx/scan.h
index 421a750add5..c83319579ca 100644
--- a/drivers/net/wireless/wl12xx/scan.h
+++ b/drivers/net/wireless/wl12xx/scan.h
@@ -33,6 +33,12 @@ int wl1271_scan_build_probe_req(struct wl1271 *wl,
 				const u8 *ie, size_t ie_len, u8 band);
 void wl1271_scan_stm(struct wl1271 *wl);
 void wl1271_scan_complete_work(struct work_struct *work);
+int wl1271_scan_sched_scan_config(struct wl1271 *wl,
+				     struct cfg80211_sched_scan_request *req,
+				     struct ieee80211_sched_scan_ies *ies);
+int wl1271_scan_sched_scan_start(struct wl1271 *wl);
+void wl1271_scan_sched_scan_stop(struct wl1271 *wl);
+void wl1271_scan_sched_scan_results(struct wl1271 *wl);
 
 #define WL1271_SCAN_MAX_CHANNELS       24
 #define WL1271_SCAN_DEFAULT_TAG        1
@@ -106,4 +112,112 @@ struct wl1271_cmd_trigger_scan_to {
 	__le32 timeout;
 } __packed;
 
+#define MAX_CHANNELS_ALL_BANDS 41
+#define SCAN_MAX_CYCLE_INTERVALS 16
+#define SCAN_MAX_BANDS 3
+
+enum {
+	SCAN_CHANNEL_TYPE_2GHZ_PASSIVE,
+	SCAN_CHANNEL_TYPE_2GHZ_ACTIVE,
+	SCAN_CHANNEL_TYPE_5GHZ_PASSIVE,
+	SCAN_CHANNEL_TYPE_5GHZ_ACTIVE,
+	SCAN_CHANNEL_TYPE_5GHZ_DFS,
+};
+
+enum {
+	SCAN_SSID_FILTER_ANY      = 0,
+	SCAN_SSID_FILTER_SPECIFIC = 1,
+	SCAN_SSID_FILTER_LIST     = 2,
+	SCAN_SSID_FILTER_DISABLED = 3
+};
+
+enum {
+	SCAN_BSS_TYPE_INDEPENDENT,
+	SCAN_BSS_TYPE_INFRASTRUCTURE,
+	SCAN_BSS_TYPE_ANY,
+};
+
+struct conn_scan_ch_params {
+	__le16 min_duration;
+	__le16 max_duration;
+	__le16 passive_duration;
+
+	u8  channel;
+	u8  tx_power_att;
+
+	/* bit 0: DFS channel; bit 1: DFS enabled */
+	u8  flags;
+
+	u8  padding[3];
+} __packed;
+
+struct wl1271_cmd_sched_scan_config {
+	struct wl1271_cmd_header header;
+
+	__le32 intervals[SCAN_MAX_CYCLE_INTERVALS];
+
+	s8 rssi_threshold; /* for filtering (in dBm) */
+	s8 snr_threshold;  /* for filtering (in dB) */
+
+	u8 cycles;       /* maximum number of scan cycles */
+	u8 report_after; /* report when this number of results are received */
+	u8 terminate;    /* stop scanning after reporting */
+
+	u8 tag;
+	u8 bss_type; /* for filtering */
+	u8 filter_type;
+
+	u8 ssid_len;     /* For SCAN_SSID_FILTER_SPECIFIC */
+	u8 ssid[IW_ESSID_MAX_SIZE];
+
+	u8 n_probe_reqs; /* Number of probes requests per channel */
+
+	u8 passive[SCAN_MAX_BANDS];
+	u8 active[SCAN_MAX_BANDS];
+
+	u8 dfs;
+
+	u8 padding[3];
+
+	struct conn_scan_ch_params channels[MAX_CHANNELS_ALL_BANDS];
+} __packed;
+
+
+#define SCHED_SCAN_MAX_SSIDS 8
+
+enum {
+	SCAN_SSID_TYPE_PUBLIC = 0,
+	SCAN_SSID_TYPE_HIDDEN = 1,
+};
+
+struct wl1271_ssid {
+	u8 type;
+	u8 len;
+	u8 ssid[IW_ESSID_MAX_SIZE];
+	/* u8 padding[2]; */
+} __packed;
+
+struct wl1271_cmd_sched_scan_ssid_list {
+	struct wl1271_cmd_header header;
+
+	u8 n_ssids;
+	struct wl1271_ssid ssids[SCHED_SCAN_MAX_SSIDS];
+	u8 padding[3];
+} __packed;
+
+struct wl1271_cmd_sched_scan_start {
+	struct wl1271_cmd_header header;
+
+	u8 tag;
+	u8 padding[3];
+} __packed;
+
+struct wl1271_cmd_sched_scan_stop {
+	struct wl1271_cmd_header header;
+
+	u8 tag;
+	u8 padding[3];
+} __packed;
+
+
 #endif /* __WL1271_SCAN_H__ */
-- 
cgit v1.2.3-70-g09d2


From 33c2c06cd2d766387cf919d0afd432cc5796c369 Mon Sep 17 00:00:00 2001
From: Luciano Coelho <coelho@ti.com>
Date: Tue, 10 May 2011 14:46:02 +0300
Subject: wl12xx: implement scheduled scan driver operations and reporting

This patch adds the mac80211 operations for scheduled scan and the
scheduled scan results reporting.

Signed-off-by: Luciano Coelho <coelho@ti.com>
---
 drivers/net/wireless/wl12xx/event.c  |  6 ++++
 drivers/net/wireless/wl12xx/main.c   | 70 ++++++++++++++++++++++++++++++++++++
 drivers/net/wireless/wl12xx/scan.c   |  6 +++-
 drivers/net/wireless/wl12xx/wl12xx.h |  2 ++
 4 files changed, 83 insertions(+), 1 deletion(-)

(limited to 'drivers/net/wireless/wl12xx')

diff --git a/drivers/net/wireless/wl12xx/event.c b/drivers/net/wireless/wl12xx/event.c
index dc110e8a618..1e4bd6a2c39 100644
--- a/drivers/net/wireless/wl12xx/event.c
+++ b/drivers/net/wireless/wl12xx/event.c
@@ -191,11 +191,17 @@ static int wl1271_event_process(struct wl1271 *wl, struct event_mailbox *mbox)
 	if (vector & PERIODIC_SCAN_REPORT_EVENT_ID) {
 		wl1271_debug(DEBUG_EVENT, "PERIODIC_SCAN_REPORT_EVENT "
 			     "(status 0x%0x)", mbox->scheduled_scan_status);
+
+		wl1271_scan_sched_scan_results(wl);
 	}
 
 	if (vector & PERIODIC_SCAN_COMPLETE_EVENT_ID) {
 		wl1271_debug(DEBUG_EVENT, "PERIODIC_SCAN_COMPLETE_EVENT "
 			     "(status 0x%0x)", mbox->scheduled_scan_status);
+		if (wl->sched_scanning) {
+			wl1271_scan_sched_scan_stop(wl);
+			ieee80211_sched_scan_stopped(wl->hw);
+		}
 	}
 
 	/* disable dynamic PS when requested by the firmware */
diff --git a/drivers/net/wireless/wl12xx/main.c b/drivers/net/wireless/wl12xx/main.c
index 88d2e9052a0..a14a035aa44 100644
--- a/drivers/net/wireless/wl12xx/main.c
+++ b/drivers/net/wireless/wl12xx/main.c
@@ -988,6 +988,11 @@ static void wl1271_recovery_work(struct work_struct *work)
 	/* Prevent spurious TX during FW restart */
 	ieee80211_stop_queues(wl->hw);
 
+	if (wl->sched_scanning) {
+		ieee80211_sched_scan_stopped(wl->hw);
+		wl->sched_scanning = false;
+	}
+
 	/* reboot the chipset */
 	__wl1271_op_remove_interface(wl, false);
 	ieee80211_restart_hw(wl->hw);
@@ -1576,6 +1581,7 @@ static void __wl1271_op_remove_interface(struct wl1271 *wl,
 	memset(wl->ap_hlid_map, 0, sizeof(wl->ap_hlid_map));
 	wl->ap_fw_ps_map = 0;
 	wl->ap_ps_map = 0;
+	wl->sched_scanning = false;
 
 	/*
 	 * this is performed after the cancel_work calls and the associated
@@ -1778,6 +1784,13 @@ static int wl1271_sta_handle_idle(struct wl1271 *wl, bool idle)
 		wl->session_counter++;
 		if (wl->session_counter >= SESSION_COUNTER_MAX)
 			wl->session_counter = 0;
+
+		/* The current firmware only supports sched_scan in idle */
+		if (wl->sched_scanning) {
+			wl1271_scan_sched_scan_stop(wl);
+			ieee80211_sched_scan_stopped(wl->hw);
+		}
+
 		ret = wl1271_dummy_join(wl);
 		if (ret < 0)
 			goto out;
@@ -2330,6 +2343,60 @@ out:
 	return ret;
 }
 
+static int wl1271_op_sched_scan_start(struct ieee80211_hw *hw,
+				      struct ieee80211_vif *vif,
+				      struct cfg80211_sched_scan_request *req,
+				      struct ieee80211_sched_scan_ies *ies)
+{
+	struct wl1271 *wl = hw->priv;
+	int ret;
+
+	wl1271_debug(DEBUG_MAC80211, "wl1271_op_sched_scan_start");
+
+	mutex_lock(&wl->mutex);
+
+	ret = wl1271_ps_elp_wakeup(wl);
+	if (ret < 0)
+		goto out;
+
+	ret = wl1271_scan_sched_scan_config(wl, req, ies);
+	if (ret < 0)
+		goto out_sleep;
+
+	ret = wl1271_scan_sched_scan_start(wl);
+	if (ret < 0)
+		goto out_sleep;
+
+	wl->sched_scanning = true;
+
+out_sleep:
+	wl1271_ps_elp_sleep(wl);
+out:
+	mutex_unlock(&wl->mutex);
+	return ret;
+}
+
+static void wl1271_op_sched_scan_stop(struct ieee80211_hw *hw,
+				      struct ieee80211_vif *vif)
+{
+	struct wl1271 *wl = hw->priv;
+	int ret;
+
+	wl1271_debug(DEBUG_MAC80211, "wl1271_op_sched_scan_stop");
+
+	mutex_lock(&wl->mutex);
+
+	ret = wl1271_ps_elp_wakeup(wl);
+	if (ret < 0)
+		goto out;
+
+	wl1271_scan_sched_scan_stop(wl);
+
+	wl1271_ps_elp_sleep(wl);
+out:
+	mutex_unlock(&wl->mutex);
+}
+
 static int wl1271_op_set_frag_threshold(struct ieee80211_hw *hw, u32 value)
 {
 	struct wl1271 *wl = hw->priv;
@@ -3445,6 +3512,8 @@ static const struct ieee80211_ops wl1271_ops = {
 	.tx = wl1271_op_tx,
 	.set_key = wl1271_op_set_key,
 	.hw_scan = wl1271_op_hw_scan,
+	.sched_scan_start = wl1271_op_sched_scan_start,
+	.sched_scan_stop = wl1271_op_sched_scan_stop,
 	.bss_info_changed = wl1271_op_bss_info_changed,
 	.set_frag_threshold = wl1271_op_set_frag_threshold,
 	.set_rts_threshold = wl1271_op_set_rts_threshold,
@@ -3765,6 +3834,7 @@ struct ieee80211_hw *wl1271_alloc_hw(void)
 	wl->ap_fw_ps_map = 0;
 	wl->quirks = 0;
 	wl->platform_quirks = 0;
+	wl->sched_scanning = false;
 
 	memset(wl->tx_frames_map, 0, sizeof(wl->tx_frames_map));
 	for (i = 0; i < ACX_TX_DESCRIPTORS; i++)
diff --git a/drivers/net/wireless/wl12xx/scan.c b/drivers/net/wireless/wl12xx/scan.c
index d78044f0081..668ff46a682 100644
--- a/drivers/net/wireless/wl12xx/scan.c
+++ b/drivers/net/wireless/wl12xx/scan.c
@@ -548,8 +548,12 @@ void wl1271_scan_sched_scan_stop(struct wl1271 *wl)
 
 	ret = wl1271_cmd_send(wl, CMD_STOP_PERIODIC_SCAN, stop,
 			      sizeof(*stop), 0);
-	if (ret < 0)
+	if (ret < 0) {
 		wl1271_error("failed to send sched scan stop command");
+		goto out_free;
+	}
+	wl->sched_scanning = false;
 
+out_free:
 	kfree(stop);
 }
diff --git a/drivers/net/wireless/wl12xx/wl12xx.h b/drivers/net/wireless/wl12xx/wl12xx.h
index b7601438eca..10f076770fe 100644
--- a/drivers/net/wireless/wl12xx/wl12xx.h
+++ b/drivers/net/wireless/wl12xx/wl12xx.h
@@ -480,6 +480,8 @@ struct wl1271 {
 	struct wl1271_scan scan;
 	struct delayed_work scan_complete_work;
 
+	bool sched_scanning;
+
 	/* probe-req template for the current AP */
 	struct sk_buff *probereq;
 
-- 
cgit v1.2.3-70-g09d2


From d3eff81de6048d8af8f95f52f0f06625980f2efb Mon Sep 17 00:00:00 2001
From: Luciano Coelho <coelho@ti.com>
Date: Tue, 10 May 2011 14:47:45 +0300
Subject: wl12xx: export scheduled scan state in debugfs

Add the sched_scanning value to the driver_status debugfs entry.

Signed-off-by: Luciano Coelho <coelho@ti.com>
---
 drivers/net/wireless/wl12xx/debugfs.c | 1 +
 1 file changed, 1 insertion(+)

(limited to 'drivers/net/wireless/wl12xx')

diff --git a/drivers/net/wireless/wl12xx/debugfs.c b/drivers/net/wireless/wl12xx/debugfs.c
index b2f692babed..f1f8df9b6cd 100644
--- a/drivers/net/wireless/wl12xx/debugfs.c
+++ b/drivers/net/wireless/wl12xx/debugfs.c
@@ -377,6 +377,7 @@ static ssize_t driver_state_read(struct file *file, char __user *user_buf,
 	DRIVER_STATE_PRINT_HEX(platform_quirks);
 	DRIVER_STATE_PRINT_HEX(chip.id);
 	DRIVER_STATE_PRINT_STR(chip.fw_ver_str);
+	DRIVER_STATE_PRINT_INT(sched_scanning);
 
 #undef DRIVER_STATE_PRINT_INT
 #undef DRIVER_STATE_PRINT_LONG
-- 
cgit v1.2.3-70-g09d2


From 683c002447c12742f5151691083f68524f33b13a Mon Sep 17 00:00:00 2001
From: Luciano Coelho <coelho@ti.com>
Date: Thu, 12 May 2011 17:07:55 +0300
Subject: wl12xx: prevent sched_scan when not idle or not in station mode

The current firmware only supports scheduled scan in station mode and
when idle.  To prevent the firmware from crashing, return -EOPNOTSUPP
when sched_scan start is called in an invalid state.

Signed-off-by: Luciano Coelho <coelho@ti.com>
---
 drivers/net/wireless/wl12xx/scan.c | 6 ++++++
 1 file changed, 6 insertions(+)

(limited to 'drivers/net/wireless/wl12xx')

diff --git a/drivers/net/wireless/wl12xx/scan.c b/drivers/net/wireless/wl12xx/scan.c
index 668ff46a682..f37e5a39197 100644
--- a/drivers/net/wireless/wl12xx/scan.c
+++ b/drivers/net/wireless/wl12xx/scan.c
@@ -505,6 +505,12 @@ int wl1271_scan_sched_scan_start(struct wl1271 *wl)
 
 	wl1271_debug(DEBUG_CMD, "cmd periodic scan start");
 
+	if (wl->bss_type != BSS_TYPE_STA_BSS)
+		return -EOPNOTSUPP;
+
+	if (!test_bit(WL1271_FLAG_IDLE, &wl->flags))
+		return -EBUSY;
+
 	start = kzalloc(sizeof(*start), GFP_KERNEL);
 	if (!start)
 		return -ENOMEM;
-- 
cgit v1.2.3-70-g09d2


From fe44870bcdf614e4abb35657c68081cda35ba741 Mon Sep 17 00:00:00 2001
From: Luciano Coelho <coelho@ti.com>
Date: Thu, 12 May 2011 16:50:41 +0300
Subject: wl12xx: remove unused flag WL1271_FLAG_IDLE_REQUESTED

This flag is not used anymore, remove it from the list.

Signed-off-by: Luciano Coelho <coelho@ti.com>
---
 drivers/net/wireless/wl12xx/wl12xx.h | 1 -
 1 file changed, 1 deletion(-)

(limited to 'drivers/net/wireless/wl12xx')

diff --git a/drivers/net/wireless/wl12xx/wl12xx.h b/drivers/net/wireless/wl12xx/wl12xx.h
index 10f076770fe..ab0c2f155b8 100644
--- a/drivers/net/wireless/wl12xx/wl12xx.h
+++ b/drivers/net/wireless/wl12xx/wl12xx.h
@@ -351,7 +351,6 @@ enum wl12xx_flags {
 	WL1271_FLAG_PSM_REQUESTED,
 	WL1271_FLAG_IRQ_RUNNING,
 	WL1271_FLAG_IDLE,
-	WL1271_FLAG_IDLE_REQUESTED,
 	WL1271_FLAG_PSPOLL_FAILURE,
 	WL1271_FLAG_STA_STATE_SENT,
 	WL1271_FLAG_FW_TX_BUSY,
-- 
cgit v1.2.3-70-g09d2


From 2c0f24636c80aa09990c507c0cede39add4b4724 Mon Sep 17 00:00:00 2001
From: Eliad Peller <eliad@wizery.com>
Date: Fri, 13 May 2011 11:57:08 +0300
Subject: wl12xx_sdio: set interrupt as wake_up interrupt

set the sdio interrupt as wake_up interrupt, so we will be able
to wake up the suspended system (Wake-On-Wireless)

Signed-off-by: Eliad Peller <eliad@wizery.com>
Signed-off-by: Luciano Coelho <coelho@ti.com>
---
 drivers/net/wireless/wl12xx/sdio.c | 3 +++
 1 file changed, 3 insertions(+)

(limited to 'drivers/net/wireless/wl12xx')

diff --git a/drivers/net/wireless/wl12xx/sdio.c b/drivers/net/wireless/wl12xx/sdio.c
index bcd4ad7ba90..1298461c45d 100644
--- a/drivers/net/wireless/wl12xx/sdio.c
+++ b/drivers/net/wireless/wl12xx/sdio.c
@@ -267,6 +267,8 @@ static int __devinit wl1271_probe(struct sdio_func *func,
 		goto out_free;
 	}
 
+	enable_irq_wake(wl->irq);
+
 	disable_irq(wl->irq);
 
 	ret = wl1271_init_ieee80211(wl);
@@ -303,6 +305,7 @@ static void __devexit wl1271_remove(struct sdio_func *func)
 	pm_runtime_get_noresume(&func->dev);
 
 	wl1271_unregister_hw(wl);
+	disable_irq_wake(wl->irq);
 	free_irq(wl->irq, wl);
 	wl1271_free_hw(wl);
 }
-- 
cgit v1.2.3-70-g09d2


From 402e48616078c1e56f55a69d314b77f1d750d6ad Mon Sep 17 00:00:00 2001
From: Eliad Peller <eliad@wizery.com>
Date: Fri, 13 May 2011 11:57:09 +0300
Subject: wl12xx: declare suspend/resume callbacks (for wowlan)

Additionally, add wow_enabled field to wl, to indicate
whether wowlan was configured.

Signed-off-by: Eliad Peller <eliad@wizery.com>
Signed-off-by: Luciano Coelho <coelho@ti.com>
---
 drivers/net/wireless/wl12xx/main.c   | 19 +++++++++++++++++++
 drivers/net/wireless/wl12xx/wl12xx.h |  6 ++++++
 2 files changed, 25 insertions(+)

(limited to 'drivers/net/wireless/wl12xx')

diff --git a/drivers/net/wireless/wl12xx/main.c b/drivers/net/wireless/wl12xx/main.c
index a14a035aa44..4b421d80187 100644
--- a/drivers/net/wireless/wl12xx/main.c
+++ b/drivers/net/wireless/wl12xx/main.c
@@ -1350,6 +1350,23 @@ static struct notifier_block wl1271_dev_notifier = {
 	.notifier_call = wl1271_dev_notify,
 };
 
+static int wl1271_op_suspend(struct ieee80211_hw *hw,
+			    struct cfg80211_wowlan *wow)
+{
+	struct wl1271 *wl = hw->priv;
+	wl1271_debug(DEBUG_MAC80211, "mac80211 suspend wow=%d", !!wow);
+	wl->wow_enabled = !!wow;
+	return 0;
+}
+
+static int wl1271_op_resume(struct ieee80211_hw *hw)
+{
+	struct wl1271 *wl = hw->priv;
+	wl1271_debug(DEBUG_MAC80211, "mac80211 resume wow=%d",
+		     wl->wow_enabled);
+	return 0;
+}
+
 static int wl1271_op_start(struct ieee80211_hw *hw)
 {
 	wl1271_debug(DEBUG_MAC80211, "mac80211 start");
@@ -3506,6 +3523,8 @@ static const struct ieee80211_ops wl1271_ops = {
 	.stop = wl1271_op_stop,
 	.add_interface = wl1271_op_add_interface,
 	.remove_interface = wl1271_op_remove_interface,
+	.suspend = wl1271_op_suspend,
+	.resume = wl1271_op_resume,
 	.config = wl1271_op_config,
 	.prepare_multicast = wl1271_op_prepare_multicast,
 	.configure_filter = wl1271_op_configure_filter,
diff --git a/drivers/net/wireless/wl12xx/wl12xx.h b/drivers/net/wireless/wl12xx/wl12xx.h
index ab0c2f155b8..9629e90d9b5 100644
--- a/drivers/net/wireless/wl12xx/wl12xx.h
+++ b/drivers/net/wireless/wl12xx/wl12xx.h
@@ -564,6 +564,12 @@ struct wl1271 {
 
 	int tcxo_clock;
 
+	/*
+	 * wowlan trigger was configured during suspend.
+	 * (currently, only "ANY" trigger is supported)
+	 */
+	bool wow_enabled;
+
 	/*
 	 * AP-mode - links indexed by HLID. The global and broadcast links
 	 * are always active.
-- 
cgit v1.2.3-70-g09d2


From 039bdb1494d1d514987ce596a4898494021c7af2 Mon Sep 17 00:00:00 2001
From: Eliad Peller <eliad@wizery.com>
Date: Fri, 13 May 2011 11:57:10 +0300
Subject: wl12xx_sdio: set MMC_PM_KEEP_POWER flag on suspend

if a wow trigger was configured, set the MMC_PM_KEEP_POWER flag
on suspend, so our power will be kept while the system is suspended.

We needed to set this flag on each suspend attempt (when we want
to keep power)

Signed-off-by: Eliad Peller <eliad@wizery.com>
Signed-off-by: Luciano Coelho <coelho@ti.com>
---
 drivers/net/wireless/wl12xx/sdio.c | 29 ++++++++++++++++++++++++++++-
 1 file changed, 28 insertions(+), 1 deletion(-)

(limited to 'drivers/net/wireless/wl12xx')

diff --git a/drivers/net/wireless/wl12xx/sdio.c b/drivers/net/wireless/wl12xx/sdio.c
index 1298461c45d..5b03fd5ee33 100644
--- a/drivers/net/wireless/wl12xx/sdio.c
+++ b/drivers/net/wireless/wl12xx/sdio.c
@@ -314,7 +314,34 @@ static int wl1271_suspend(struct device *dev)
 {
 	/* Tell MMC/SDIO core it's OK to power down the card
 	 * (if it isn't already), but not to remove it completely */
-	return 0;
+	struct sdio_func *func = dev_to_sdio_func(dev);
+	struct wl1271 *wl = sdio_get_drvdata(func);
+	mmc_pm_flag_t sdio_flags;
+	int ret = 0;
+
+	wl1271_debug(DEBUG_MAC80211, "wl1271 suspend. wow_enabled: %d",
+		     wl->wow_enabled);
+
+	/* check whether sdio should keep power */
+	if (wl->wow_enabled) {
+		sdio_flags = sdio_get_host_pm_caps(func);
+
+		if (!(sdio_flags & MMC_PM_KEEP_POWER)) {
+			wl1271_error("can't keep power while host "
+				     "is suspended");
+			ret = -EINVAL;
+			goto out;
+		}
+
+		/* keep power while host suspended */
+		ret = sdio_set_host_pm_flags(func, MMC_PM_KEEP_POWER);
+		if (ret) {
+			wl1271_error("error while trying to keep power");
+			goto out;
+		}
+	}
+out:
+	return ret;
 }
 
 static int wl1271_resume(struct device *dev)
-- 
cgit v1.2.3-70-g09d2


From f44e58681aec420b132a54823d8911293a644d4e Mon Sep 17 00:00:00 2001
From: Eliad Peller <eliad@wizery.com>
Date: Fri, 13 May 2011 11:57:11 +0300
Subject: wl12xx: prevent scheduling while suspending (WoW enabled)

When WoW is enabled, the interface will stay up and the chip will
be powered on, so we have to flush/cancel any remaining work, and
prevent the irq handler from scheduling a new work until the system
is resumed.

Add 2 new flags:
* WL1271_FLAG_SUSPENDED - the system is (about to be) suspended.
* WL1271_FLAG_PENDING_WORK - there is a pending irq work which
   should be scheduled when the system is being resumed.

In order to wake-up the system while getting an irq, we initialize
the device as wakeup device, and calling pm_wakeup_event() upon
getting the interrupt (while the system is about to be suspended)

Signed-off-by: Eliad Peller <eliad@wizery.com>
Signed-off-by: Luciano Coelho <coelho@ti.com>
---
 drivers/net/wireless/wl12xx/main.c   | 46 ++++++++++++++++++++++++++++++++++++
 drivers/net/wireless/wl12xx/sdio.c   | 24 +++++++++++++++++++
 drivers/net/wireless/wl12xx/wl12xx.h |  2 ++
 3 files changed, 72 insertions(+)

(limited to 'drivers/net/wireless/wl12xx')

diff --git a/drivers/net/wireless/wl12xx/main.c b/drivers/net/wireless/wl12xx/main.c
index 4b421d80187..8f9e6152f3b 100644
--- a/drivers/net/wireless/wl12xx/main.c
+++ b/drivers/net/wireless/wl12xx/main.c
@@ -1356,6 +1356,28 @@ static int wl1271_op_suspend(struct ieee80211_hw *hw,
 	struct wl1271 *wl = hw->priv;
 	wl1271_debug(DEBUG_MAC80211, "mac80211 suspend wow=%d", !!wow);
 	wl->wow_enabled = !!wow;
+	if (wl->wow_enabled) {
+		/* flush any remaining work */
+		wl1271_debug(DEBUG_MAC80211, "flushing remaining works");
+		flush_delayed_work(&wl->scan_complete_work);
+
+		/*
+		 * disable and re-enable interrupts in order to flush
+		 * the threaded_irq
+		 */
+		wl1271_disable_interrupts(wl);
+
+		/*
+		 * set suspended flag to avoid triggering a new threaded_irq
+		 * work. no need for spinlock as interrupts are disabled.
+		 */
+		set_bit(WL1271_FLAG_SUSPENDED, &wl->flags);
+
+		wl1271_enable_interrupts(wl);
+		flush_work(&wl->tx_work);
+		flush_delayed_work(&wl->pspoll_work);
+		flush_delayed_work(&wl->elp_work);
+	}
 	return 0;
 }
 
@@ -1364,6 +1386,30 @@ static int wl1271_op_resume(struct ieee80211_hw *hw)
 	struct wl1271 *wl = hw->priv;
 	wl1271_debug(DEBUG_MAC80211, "mac80211 resume wow=%d",
 		     wl->wow_enabled);
+
+	/*
+	 * re-enable irq_work enqueuing, and call irq_work directly if
+	 * there is a pending work.
+	 */
+	if (wl->wow_enabled) {
+		struct wl1271 *wl = hw->priv;
+		unsigned long flags;
+		bool run_irq_work = false;
+
+		spin_lock_irqsave(&wl->wl_lock, flags);
+		clear_bit(WL1271_FLAG_SUSPENDED, &wl->flags);
+		if (test_and_clear_bit(WL1271_FLAG_PENDING_WORK, &wl->flags))
+			run_irq_work = true;
+		spin_unlock_irqrestore(&wl->wl_lock, flags);
+
+		if (run_irq_work) {
+			wl1271_debug(DEBUG_MAC80211,
+				     "run postponed irq_work directly");
+			wl1271_irq(0, wl);
+			wl1271_enable_interrupts(wl);
+		}
+	}
+
 	return 0;
 }
 
diff --git a/drivers/net/wireless/wl12xx/sdio.c b/drivers/net/wireless/wl12xx/sdio.c
index 5b03fd5ee33..41183db3483 100644
--- a/drivers/net/wireless/wl12xx/sdio.c
+++ b/drivers/net/wireless/wl12xx/sdio.c
@@ -82,6 +82,16 @@ static irqreturn_t wl1271_hardirq(int irq, void *cookie)
 		complete(wl->elp_compl);
 		wl->elp_compl = NULL;
 	}
+
+	if (test_bit(WL1271_FLAG_SUSPENDED, &wl->flags)) {
+		/* don't enqueue a work right now. mark it as pending */
+		set_bit(WL1271_FLAG_PENDING_WORK, &wl->flags);
+		wl1271_debug(DEBUG_IRQ, "should not enqueue work");
+		disable_irq_nosync(wl->irq);
+		pm_wakeup_event(wl1271_sdio_wl_to_dev(wl), 0);
+		spin_unlock_irqrestore(&wl->wl_lock, flags);
+		return IRQ_HANDLED;
+	}
 	spin_unlock_irqrestore(&wl->wl_lock, flags);
 
 	return IRQ_WAKE_THREAD;
@@ -268,6 +278,7 @@ static int __devinit wl1271_probe(struct sdio_func *func,
 	}
 
 	enable_irq_wake(wl->irq);
+	device_init_wakeup(wl1271_sdio_wl_to_dev(wl), 1);
 
 	disable_irq(wl->irq);
 
@@ -305,6 +316,7 @@ static void __devexit wl1271_remove(struct sdio_func *func)
 	pm_runtime_get_noresume(&func->dev);
 
 	wl1271_unregister_hw(wl);
+	device_init_wakeup(wl1271_sdio_wl_to_dev(wl), 0);
 	disable_irq_wake(wl->irq);
 	free_irq(wl->irq, wl);
 	wl1271_free_hw(wl);
@@ -339,6 +351,9 @@ static int wl1271_suspend(struct device *dev)
 			wl1271_error("error while trying to keep power");
 			goto out;
 		}
+
+		/* release host */
+		sdio_release_host(func);
 	}
 out:
 	return ret;
@@ -346,6 +361,15 @@ out:
 
 static int wl1271_resume(struct device *dev)
 {
+	struct sdio_func *func = dev_to_sdio_func(dev);
+	struct wl1271 *wl = sdio_get_drvdata(func);
+
+	wl1271_debug(DEBUG_MAC80211, "wl1271 resume");
+	if (wl->wow_enabled) {
+		/* claim back host */
+		sdio_claim_host(func);
+	}
+
 	return 0;
 }
 
diff --git a/drivers/net/wireless/wl12xx/wl12xx.h b/drivers/net/wireless/wl12xx/wl12xx.h
index 9629e90d9b5..2218b9c6384 100644
--- a/drivers/net/wireless/wl12xx/wl12xx.h
+++ b/drivers/net/wireless/wl12xx/wl12xx.h
@@ -357,6 +357,8 @@ enum wl12xx_flags {
 	WL1271_FLAG_AP_STARTED,
 	WL1271_FLAG_IF_INITIALIZED,
 	WL1271_FLAG_DUMMY_PACKET_PENDING,
+	WL1271_FLAG_SUSPENDED,
+	WL1271_FLAG_PENDING_WORK,
 };
 
 struct wl1271_link {
-- 
cgit v1.2.3-70-g09d2


From f795ea8b2f047409c59e891d6e5e86a925048bf4 Mon Sep 17 00:00:00 2001
From: Eliad Peller <eliad@wizery.com>
Date: Fri, 13 May 2011 11:57:12 +0300
Subject: wl12xx_sdio: declare support for NL80211_WOW_TRIGGER_ANYTHING trigger

Since wowlan requires the ability to stay awake while the host
is suspended, declare support for NL80211_WOW_TRIGGER_ANYTHING
if the MMC_PM_KEEP_POWER capability is being supported.

Signed-off-by: Eliad Peller <eliad@wizery.com>
Signed-off-by: Luciano Coelho <coelho@ti.com>
---
 drivers/net/wireless/wl12xx/sdio.c | 8 ++++++++
 1 file changed, 8 insertions(+)

(limited to 'drivers/net/wireless/wl12xx')

diff --git a/drivers/net/wireless/wl12xx/sdio.c b/drivers/net/wireless/wl12xx/sdio.c
index 41183db3483..92d29a860fc 100644
--- a/drivers/net/wireless/wl12xx/sdio.c
+++ b/drivers/net/wireless/wl12xx/sdio.c
@@ -231,6 +231,7 @@ static int __devinit wl1271_probe(struct sdio_func *func,
 	const struct wl12xx_platform_data *wlan_data;
 	struct wl1271 *wl;
 	unsigned long irqflags;
+	mmc_pm_flag_t mmcflags;
 	int ret;
 
 	/* We are only able to handle the wlan function */
@@ -282,6 +283,13 @@ static int __devinit wl1271_probe(struct sdio_func *func,
 
 	disable_irq(wl->irq);
 
+	/* if sdio can keep power while host is suspended, enable wow */
+	mmcflags = sdio_get_host_pm_caps(func);
+	wl1271_debug(DEBUG_SDIO, "sdio PM caps = 0x%x", mmcflags);
+
+	if (mmcflags & MMC_PM_KEEP_POWER)
+		hw->wiphy->wowlan.flags = WIPHY_WOWLAN_ANY;
+
 	ret = wl1271_init_ieee80211(wl);
 	if (ret)
 		goto out_irq;
-- 
cgit v1.2.3-70-g09d2


From 9439064cd9fce8a4db716a748dbf581eb234f9c7 Mon Sep 17 00:00:00 2001
From: Eliad Peller <eliad@wizery.com>
Date: Fri, 13 May 2011 11:57:13 +0300
Subject: wl12xx: enter/exit psm on wowlan suspend/resume

When operating as station, enter psm before suspending
the device into wowlan state.

Add a new completion event to signal when psm was entered
successfully.

Signed-off-by: Eliad Peller <eliad@wizery.com>
Signed-off-by: Luciano Coelho <coelho@ti.com>
---
 drivers/net/wireless/wl12xx/event.c  |  7 ++++
 drivers/net/wireless/wl12xx/main.c   | 81 ++++++++++++++++++++++++++++++++++++
 drivers/net/wireless/wl12xx/ps.h     |  2 +
 drivers/net/wireless/wl12xx/wl12xx.h |  1 +
 4 files changed, 91 insertions(+)

(limited to 'drivers/net/wireless/wl12xx')

diff --git a/drivers/net/wireless/wl12xx/event.c b/drivers/net/wireless/wl12xx/event.c
index 1e4bd6a2c39..c3c554cd658 100644
--- a/drivers/net/wireless/wl12xx/event.c
+++ b/drivers/net/wireless/wl12xx/event.c
@@ -135,6 +135,13 @@ static int wl1271_event_ps_report(struct wl1271 *wl,
 
 		/* enable beacon early termination */
 		ret = wl1271_acx_bet_enable(wl, true);
+		if (ret < 0)
+			break;
+
+		if (wl->ps_compl) {
+			complete(wl->ps_compl);
+			wl->ps_compl = NULL;
+		}
 		break;
 	default:
 		break;
diff --git a/drivers/net/wireless/wl12xx/main.c b/drivers/net/wireless/wl12xx/main.c
index 8f9e6152f3b..610be03a198 100644
--- a/drivers/net/wireless/wl12xx/main.c
+++ b/drivers/net/wireless/wl12xx/main.c
@@ -1350,6 +1350,79 @@ static struct notifier_block wl1271_dev_notifier = {
 	.notifier_call = wl1271_dev_notify,
 };
 
+static int wl1271_configure_suspend(struct wl1271 *wl)
+{
+	int ret;
+
+	if (wl->bss_type != BSS_TYPE_STA_BSS)
+		return 0;
+
+	mutex_lock(&wl->mutex);
+
+	ret = wl1271_ps_elp_wakeup(wl);
+	if (ret < 0)
+		goto out_unlock;
+
+	/* enter psm if needed*/
+	if (!test_bit(WL1271_FLAG_PSM, &wl->flags)) {
+		DECLARE_COMPLETION_ONSTACK(compl);
+
+		wl->ps_compl = &compl;
+		ret = wl1271_ps_set_mode(wl, STATION_POWER_SAVE_MODE,
+				   wl->basic_rate, true);
+		if (ret < 0)
+			goto out_sleep;
+
+		/* we must unlock here so we will be able to get events */
+		wl1271_ps_elp_sleep(wl);
+		mutex_unlock(&wl->mutex);
+
+		ret = wait_for_completion_timeout(
+			&compl, msecs_to_jiffies(WL1271_PS_COMPLETE_TIMEOUT));
+		if (ret <= 0) {
+			wl1271_warning("couldn't enter ps mode!");
+			ret = -EBUSY;
+			goto out;
+		}
+
+		/* take mutex again, and wakeup */
+		mutex_lock(&wl->mutex);
+
+		ret = wl1271_ps_elp_wakeup(wl);
+		if (ret < 0)
+			goto out_unlock;
+	}
+out_sleep:
+	wl1271_ps_elp_sleep(wl);
+out_unlock:
+	mutex_unlock(&wl->mutex);
+out:
+	return ret;
+
+}
+
+static void wl1271_configure_resume(struct wl1271 *wl)
+{
+	int ret;
+
+	if (wl->bss_type != BSS_TYPE_STA_BSS)
+		return;
+
+	mutex_lock(&wl->mutex);
+	ret = wl1271_ps_elp_wakeup(wl);
+	if (ret < 0)
+		goto out;
+
+	/* exit psm if it wasn't configured */
+	if (!test_bit(WL1271_FLAG_PSM_REQUESTED, &wl->flags))
+		wl1271_ps_set_mode(wl, STATION_ACTIVE_MODE,
+				   wl->basic_rate, true);
+
+	wl1271_ps_elp_sleep(wl);
+out:
+	mutex_unlock(&wl->mutex);
+}
+
 static int wl1271_op_suspend(struct ieee80211_hw *hw,
 			    struct cfg80211_wowlan *wow)
 {
@@ -1357,6 +1430,12 @@ static int wl1271_op_suspend(struct ieee80211_hw *hw,
 	wl1271_debug(DEBUG_MAC80211, "mac80211 suspend wow=%d", !!wow);
 	wl->wow_enabled = !!wow;
 	if (wl->wow_enabled) {
+		int ret;
+		ret = wl1271_configure_suspend(wl);
+		if (ret < 0) {
+			wl1271_warning("couldn't prepare device to suspend");
+			return ret;
+		}
 		/* flush any remaining work */
 		wl1271_debug(DEBUG_MAC80211, "flushing remaining works");
 		flush_delayed_work(&wl->scan_complete_work);
@@ -1408,6 +1487,8 @@ static int wl1271_op_resume(struct ieee80211_hw *hw)
 			wl1271_irq(0, wl);
 			wl1271_enable_interrupts(wl);
 		}
+
+		wl1271_configure_resume(wl);
 	}
 
 	return 0;
diff --git a/drivers/net/wireless/wl12xx/ps.h b/drivers/net/wireless/wl12xx/ps.h
index c41bd0a711b..25eb9bc9b62 100644
--- a/drivers/net/wireless/wl12xx/ps.h
+++ b/drivers/net/wireless/wl12xx/ps.h
@@ -35,4 +35,6 @@ void wl1271_elp_work(struct work_struct *work);
 void wl1271_ps_link_start(struct wl1271 *wl, u8 hlid, bool clean_queues);
 void wl1271_ps_link_end(struct wl1271 *wl, u8 hlid);
 
+#define WL1271_PS_COMPLETE_TIMEOUT 500
+
 #endif /* __WL1271_PS_H__ */
diff --git a/drivers/net/wireless/wl12xx/wl12xx.h b/drivers/net/wireless/wl12xx/wl12xx.h
index 2218b9c6384..fbe8f46d123 100644
--- a/drivers/net/wireless/wl12xx/wl12xx.h
+++ b/drivers/net/wireless/wl12xx/wl12xx.h
@@ -513,6 +513,7 @@ struct wl1271 {
 	unsigned int rx_filter;
 
 	struct completion *elp_compl;
+	struct completion *ps_compl;
 	struct delayed_work elp_work;
 	struct delayed_work pspoll_work;
 
-- 
cgit v1.2.3-70-g09d2


From f634a4e7074f66ac3dfaf2cc6786e0ec3080a2d1 Mon Sep 17 00:00:00 2001
From: Luciano Coelho <coelho@ti.com>
Date: Wed, 18 May 2011 16:51:26 -0400
Subject: wl12xx: fix compilation error when CONFIG_PM is not set

There was a compilation error when PM is not enabled:

  CC [M]  drivers/net/wireless/wl12xx/main.o
drivers/net/wireless/wl12xx/main.c:3653: error: unknown field 'suspend' specified in initializer
drivers/net/wireless/wl12xx/main.c:3653: warning: initialization from incompatible pointer type
drivers/net/wireless/wl12xx/main.c:3654: error: unknown field 'resume' specified in initializer
drivers/net/wireless/wl12xx/main.c:3654: warning: initialization from incompatible pointer type

Fix this by adding #ifdef's in the appropriate places.

Cc: Eliad Peller <eliad@wizery.com>
Signed-off-by: Luciano Coelho <coelho@ti.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/wireless/wl12xx/main.c | 4 ++++
 drivers/net/wireless/wl12xx/sdio.c | 4 ++++
 2 files changed, 8 insertions(+)

(limited to 'drivers/net/wireless/wl12xx')

diff --git a/drivers/net/wireless/wl12xx/main.c b/drivers/net/wireless/wl12xx/main.c
index 610be03a198..bc00e52f644 100644
--- a/drivers/net/wireless/wl12xx/main.c
+++ b/drivers/net/wireless/wl12xx/main.c
@@ -1350,6 +1350,7 @@ static struct notifier_block wl1271_dev_notifier = {
 	.notifier_call = wl1271_dev_notify,
 };
 
+#ifdef CONFIG_PM
 static int wl1271_configure_suspend(struct wl1271 *wl)
 {
 	int ret;
@@ -1493,6 +1494,7 @@ static int wl1271_op_resume(struct ieee80211_hw *hw)
 
 	return 0;
 }
+#endif
 
 static int wl1271_op_start(struct ieee80211_hw *hw)
 {
@@ -3650,8 +3652,10 @@ static const struct ieee80211_ops wl1271_ops = {
 	.stop = wl1271_op_stop,
 	.add_interface = wl1271_op_add_interface,
 	.remove_interface = wl1271_op_remove_interface,
+#ifdef CONFIG_PM
 	.suspend = wl1271_op_suspend,
 	.resume = wl1271_op_resume,
+#endif
 	.config = wl1271_op_config,
 	.prepare_multicast = wl1271_op_prepare_multicast,
 	.configure_filter = wl1271_op_configure_filter,
diff --git a/drivers/net/wireless/wl12xx/sdio.c b/drivers/net/wireless/wl12xx/sdio.c
index 92d29a860fc..536e5065454 100644
--- a/drivers/net/wireless/wl12xx/sdio.c
+++ b/drivers/net/wireless/wl12xx/sdio.c
@@ -330,6 +330,7 @@ static void __devexit wl1271_remove(struct sdio_func *func)
 	wl1271_free_hw(wl);
 }
 
+#ifdef CONFIG_PM
 static int wl1271_suspend(struct device *dev)
 {
 	/* Tell MMC/SDIO core it's OK to power down the card
@@ -385,15 +386,18 @@ static const struct dev_pm_ops wl1271_sdio_pm_ops = {
 	.suspend	= wl1271_suspend,
 	.resume		= wl1271_resume,
 };
+#endif
 
 static struct sdio_driver wl1271_sdio_driver = {
 	.name		= "wl1271_sdio",
 	.id_table	= wl1271_devices,
 	.probe		= wl1271_probe,
 	.remove		= __devexit_p(wl1271_remove),
+#ifdef CONFIG_PM
 	.drv = {
 		.pm = &wl1271_sdio_pm_ops,
 	},
+#endif
 };
 
 static int __init wl1271_init(void)
-- 
cgit v1.2.3-70-g09d2