From e174961ca1a0b28f7abf0be47973ad57cb74e5f0 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Mon, 27 Oct 2008 15:59:26 -0700 Subject: net: convert print_mac to %pM This converts pretty much everything to print_mac. There were a few things that had conflicts which I have just dropped for now, no harm done. I've built an allyesconfig with this and looked at the files that weren't built very carefully, but it's a huge patch. Signed-off-by: Johannes Berg Signed-off-by: David S. Miller --- drivers/net/wireless/zd1211rw/zd_mac.c | 6 ++---- 1 file changed, 2 insertions(+), 4 deletions(-) (limited to 'drivers/net/wireless/zd1211rw/zd_mac.c') diff --git a/drivers/net/wireless/zd1211rw/zd_mac.c b/drivers/net/wireless/zd1211rw/zd_mac.c index fe1867b25ff..de45509d757 100644 --- a/drivers/net/wireless/zd1211rw/zd_mac.c +++ b/drivers/net/wireless/zd1211rw/zd_mac.c @@ -852,14 +852,12 @@ static void zd_op_configure_filter(struct ieee80211_hw *hw, if (*new_flags & (FIF_PROMISC_IN_BSS | FIF_ALLMULTI)) { zd_mc_add_all(&hash); } else { - DECLARE_MAC_BUF(macbuf); - zd_mc_clear(&hash); for (i = 0; i < mc_count; i++) { if (!mclist) break; - dev_dbg_f(zd_mac_dev(mac), "mc addr %s\n", - print_mac(macbuf, mclist->dmi_addr)); + dev_dbg_f(zd_mac_dev(mac), "mc addr %pM\n", + mclist->dmi_addr); zd_mc_add_addr(&hash, mclist->dmi_addr); mclist = mclist->next; } -- cgit v1.2.3-70-g09d2 From e8975581f63870be42ff4662b293d1b0c8c21350 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Thu, 9 Oct 2008 12:18:51 +0200 Subject: mac80211: introduce hw config change flags This makes mac80211 notify the driver which configuration actually changed, e.g. channel etc. No driver changes, this is just plumbing, driver authors are expected to act on this if they want to. Also remove the HW CONFIG debug printk, it's incorrect, often we configure something else. Signed-off-by: Johannes Berg Signed-off-by: John W. Linville --- drivers/net/wireless/adm8211.c | 3 ++- drivers/net/wireless/ath5k/base.c | 7 +++---- drivers/net/wireless/ath9k/main.c | 4 ++-- drivers/net/wireless/b43/main.c | 3 ++- drivers/net/wireless/b43legacy/main.c | 3 ++- drivers/net/wireless/iwlwifi/iwl-agn.c | 3 ++- drivers/net/wireless/iwlwifi/iwl3945-base.c | 7 ++++--- drivers/net/wireless/libertas_tf/main.c | 4 +++- drivers/net/wireless/mac80211_hwsim.c | 4 ++-- drivers/net/wireless/p54/p54common.c | 3 ++- drivers/net/wireless/rt2x00/rt2x00.h | 2 +- drivers/net/wireless/rt2x00/rt2x00dev.c | 2 +- drivers/net/wireless/rt2x00/rt2x00mac.c | 3 ++- drivers/net/wireless/rtl8180_dev.c | 3 ++- drivers/net/wireless/rtl8187_dev.c | 3 ++- drivers/net/wireless/zd1211rw/zd_mac.c | 4 +++- include/net/mac80211.h | 30 ++++++++++++++++++++++++----- net/mac80211/cfg.c | 3 ++- net/mac80211/ieee80211_i.h | 2 +- net/mac80211/iface.c | 25 ++++++++++++++++++------ net/mac80211/main.c | 29 +++++++++++++++------------- net/mac80211/scan.c | 12 +++++++++--- net/mac80211/util.c | 3 ++- net/mac80211/wext.c | 14 +++++++------- 24 files changed, 116 insertions(+), 60 deletions(-) (limited to 'drivers/net/wireless/zd1211rw/zd_mac.c') diff --git a/drivers/net/wireless/adm8211.c b/drivers/net/wireless/adm8211.c index 6e18c9d3678..9a1e0c514c0 100644 --- a/drivers/net/wireless/adm8211.c +++ b/drivers/net/wireless/adm8211.c @@ -1314,9 +1314,10 @@ static int adm8211_set_ssid(struct ieee80211_hw *dev, u8 *ssid, size_t ssid_len) return 0; } -static int adm8211_config(struct ieee80211_hw *dev, struct ieee80211_conf *conf) +static int adm8211_config(struct ieee80211_hw *dev, u32 changed) { struct adm8211_priv *priv = dev->priv; + struct ieee80211_conf *conf = &dev->conf; int channel = ieee80211_frequency_to_channel(conf->channel->center_freq); if (channel != priv->channel) { diff --git a/drivers/net/wireless/ath5k/base.c b/drivers/net/wireless/ath5k/base.c index 9e47d727e22..fcd688765d0 100644 --- a/drivers/net/wireless/ath5k/base.c +++ b/drivers/net/wireless/ath5k/base.c @@ -219,8 +219,7 @@ static int ath5k_add_interface(struct ieee80211_hw *hw, struct ieee80211_if_init_conf *conf); static void ath5k_remove_interface(struct ieee80211_hw *hw, struct ieee80211_if_init_conf *conf); -static int ath5k_config(struct ieee80211_hw *hw, - struct ieee80211_conf *conf); +static int ath5k_config(struct ieee80211_hw *hw, u32 changed); static int ath5k_config_interface(struct ieee80211_hw *hw, struct ieee80211_vif *vif, struct ieee80211_if_conf *conf); @@ -2780,10 +2779,10 @@ end: * TODO: Phy disable/diversity etc */ static int -ath5k_config(struct ieee80211_hw *hw, - struct ieee80211_conf *conf) +ath5k_config(struct ieee80211_hw *hw, u32 changed) { struct ath5k_softc *sc = hw->priv; + struct ieee80211_conf *conf = &hw->conf; sc->bintval = conf->beacon_int; sc->power_level = conf->power_level; diff --git a/drivers/net/wireless/ath9k/main.c b/drivers/net/wireless/ath9k/main.c index 5e087c92a6d..f49910799ed 100644 --- a/drivers/net/wireless/ath9k/main.c +++ b/drivers/net/wireless/ath9k/main.c @@ -1230,11 +1230,11 @@ static void ath9k_remove_interface(struct ieee80211_hw *hw, __func__, error); } -static int ath9k_config(struct ieee80211_hw *hw, - struct ieee80211_conf *conf) +static int ath9k_config(struct ieee80211_hw *hw, u32 changed) { struct ath_softc *sc = hw->priv; struct ieee80211_channel *curchan = hw->conf.channel; + struct ieee80211_conf *conf = &hw->conf; int pos; DPRINTF(sc, ATH_DBG_CONFIG, "%s: Set channel: %d MHz\n", diff --git a/drivers/net/wireless/b43/main.c b/drivers/net/wireless/b43/main.c index 6b85428b0e1..2e81af1022e 100644 --- a/drivers/net/wireless/b43/main.c +++ b/drivers/net/wireless/b43/main.c @@ -3320,11 +3320,12 @@ init_failure: return err; } -static int b43_op_config(struct ieee80211_hw *hw, struct ieee80211_conf *conf) +static int b43_op_config(struct ieee80211_hw *hw, u32 changed) { struct b43_wl *wl = hw_to_b43_wl(hw); struct b43_wldev *dev; struct b43_phy *phy; + struct ieee80211_conf *conf = &hw->conf; unsigned long flags; int antenna; int err = 0; diff --git a/drivers/net/wireless/b43legacy/main.c b/drivers/net/wireless/b43legacy/main.c index 867f01ce45c..793cc396562 100644 --- a/drivers/net/wireless/b43legacy/main.c +++ b/drivers/net/wireless/b43legacy/main.c @@ -2557,11 +2557,12 @@ init_failure: } static int b43legacy_op_dev_config(struct ieee80211_hw *hw, - struct ieee80211_conf *conf) + u32 changed) { struct b43legacy_wl *wl = hw_to_b43legacy_wl(hw); struct b43legacy_wldev *dev; struct b43legacy_phy *phy; + struct ieee80211_conf *conf = &hw->conf; unsigned long flags; unsigned int new_phymode = 0xFFFF; int antenna_tx; diff --git a/drivers/net/wireless/iwlwifi/iwl-agn.c b/drivers/net/wireless/iwlwifi/iwl-agn.c index e6695e80fb5..79a24410dd0 100644 --- a/drivers/net/wireless/iwlwifi/iwl-agn.c +++ b/drivers/net/wireless/iwlwifi/iwl-agn.c @@ -2734,10 +2734,11 @@ static int iwl4965_mac_add_interface(struct ieee80211_hw *hw, * be set inappropriately and the driver currently sets the hardware up to * use it whenever needed. */ -static int iwl4965_mac_config(struct ieee80211_hw *hw, struct ieee80211_conf *conf) +static int iwl4965_mac_config(struct ieee80211_hw *hw, u32 changed) { struct iwl_priv *priv = hw->priv; const struct iwl_channel_info *ch_info; + struct ieee80211_conf *conf = &hw->conf; unsigned long flags; int ret = 0; u16 channel; diff --git a/drivers/net/wireless/iwlwifi/iwl3945-base.c b/drivers/net/wireless/iwlwifi/iwl3945-base.c index d3a2966d918..b1464c71ea0 100644 --- a/drivers/net/wireless/iwlwifi/iwl3945-base.c +++ b/drivers/net/wireless/iwlwifi/iwl3945-base.c @@ -6415,7 +6415,7 @@ static void iwl3945_bg_abort_scan(struct work_struct *work) mutex_unlock(&priv->mutex); } -static int iwl3945_mac_config(struct ieee80211_hw *hw, struct ieee80211_conf *conf); +static int iwl3945_mac_config(struct ieee80211_hw *hw, u32 changed); static void iwl3945_bg_scan_completed(struct work_struct *work) { @@ -6428,7 +6428,7 @@ static void iwl3945_bg_scan_completed(struct work_struct *work) return; if (test_bit(STATUS_CONF_PENDING, &priv->status)) - iwl3945_mac_config(priv->hw, ieee80211_get_hw_conf(priv->hw)); + iwl3945_mac_config(priv->hw, 0); ieee80211_scan_completed(priv->hw); @@ -6616,10 +6616,11 @@ static int iwl3945_mac_add_interface(struct ieee80211_hw *hw, * be set inappropriately and the driver currently sets the hardware up to * use it whenever needed. */ -static int iwl3945_mac_config(struct ieee80211_hw *hw, struct ieee80211_conf *conf) +static int iwl3945_mac_config(struct ieee80211_hw *hw, u32 changed) { struct iwl3945_priv *priv = hw->priv; const struct iwl3945_channel_info *ch_info; + struct ieee80211_conf *conf = &hw->conf; unsigned long flags; int ret = 0; diff --git a/drivers/net/wireless/libertas_tf/main.c b/drivers/net/wireless/libertas_tf/main.c index feff945ad85..241ddcfa352 100644 --- a/drivers/net/wireless/libertas_tf/main.c +++ b/drivers/net/wireless/libertas_tf/main.c @@ -354,9 +354,11 @@ static void lbtf_op_remove_interface(struct ieee80211_hw *hw, priv->vif = NULL; } -static int lbtf_op_config(struct ieee80211_hw *hw, struct ieee80211_conf *conf) +static int lbtf_op_config(struct ieee80211_hw *hw, u32 changed) { struct lbtf_private *priv = hw->priv; + struct ieee80211_conf *conf = &hw->conf; + if (conf->channel->center_freq != priv->cur_freq) { priv->cur_freq = conf->channel->center_freq; lbtf_set_channel(priv, conf->channel->hw_value); diff --git a/drivers/net/wireless/mac80211_hwsim.c b/drivers/net/wireless/mac80211_hwsim.c index 3f236b54668..e2aeef8de70 100644 --- a/drivers/net/wireless/mac80211_hwsim.c +++ b/drivers/net/wireless/mac80211_hwsim.c @@ -359,10 +359,10 @@ static void mac80211_hwsim_beacon(unsigned long arg) } -static int mac80211_hwsim_config(struct ieee80211_hw *hw, - struct ieee80211_conf *conf) +static int mac80211_hwsim_config(struct ieee80211_hw *hw, u32 changed) { struct mac80211_hwsim_data *data = hw->priv; + struct ieee80211_conf *conf = &hw->conf; printk(KERN_DEBUG "%s:%s (freq=%d radio_enabled=%d beacon_int=%d)\n", wiphy_name(hw->wiphy), __func__, diff --git a/drivers/net/wireless/p54/p54common.c b/drivers/net/wireless/p54/p54common.c index b3e75eb4d5b..b3c297ed00c 100644 --- a/drivers/net/wireless/p54/p54common.c +++ b/drivers/net/wireless/p54/p54common.c @@ -1192,10 +1192,11 @@ static void p54_remove_interface(struct ieee80211_hw *dev, p54_set_filter(dev, 0, NULL); } -static int p54_config(struct ieee80211_hw *dev, struct ieee80211_conf *conf) +static int p54_config(struct ieee80211_hw *dev, u32 changed) { int ret; struct p54_common *priv = dev->priv; + struct ieee80211_conf *conf = &dev->conf; mutex_lock(&priv->conf_mutex); priv->rx_antenna = 2; /* automatic */ diff --git a/drivers/net/wireless/rt2x00/rt2x00.h b/drivers/net/wireless/rt2x00/rt2x00.h index 1359a376840..8ec8f7e9ec6 100644 --- a/drivers/net/wireless/rt2x00/rt2x00.h +++ b/drivers/net/wireless/rt2x00/rt2x00.h @@ -997,7 +997,7 @@ int rt2x00mac_add_interface(struct ieee80211_hw *hw, struct ieee80211_if_init_conf *conf); void rt2x00mac_remove_interface(struct ieee80211_hw *hw, struct ieee80211_if_init_conf *conf); -int rt2x00mac_config(struct ieee80211_hw *hw, struct ieee80211_conf *conf); +int rt2x00mac_config(struct ieee80211_hw *hw, u32 changed); int rt2x00mac_config_interface(struct ieee80211_hw *hw, struct ieee80211_vif *vif, struct ieee80211_if_conf *conf); diff --git a/drivers/net/wireless/rt2x00/rt2x00dev.c b/drivers/net/wireless/rt2x00/rt2x00dev.c index 9e0472bd1ed..697806cf94e 100644 --- a/drivers/net/wireless/rt2x00/rt2x00dev.c +++ b/drivers/net/wireless/rt2x00/rt2x00dev.c @@ -1245,7 +1245,7 @@ int rt2x00lib_resume(struct rt2x00_dev *rt2x00dev) /* * Reconfigure device. */ - retval = rt2x00mac_config(rt2x00dev->hw, &rt2x00dev->hw->conf); + retval = rt2x00mac_config(rt2x00dev->hw, ~0); if (retval) goto exit; diff --git a/drivers/net/wireless/rt2x00/rt2x00mac.c b/drivers/net/wireless/rt2x00/rt2x00mac.c index 2c6cc5c374f..da7b49a364f 100644 --- a/drivers/net/wireless/rt2x00/rt2x00mac.c +++ b/drivers/net/wireless/rt2x00/rt2x00mac.c @@ -335,9 +335,10 @@ void rt2x00mac_remove_interface(struct ieee80211_hw *hw, } EXPORT_SYMBOL_GPL(rt2x00mac_remove_interface); -int rt2x00mac_config(struct ieee80211_hw *hw, struct ieee80211_conf *conf) +int rt2x00mac_config(struct ieee80211_hw *hw, u32 changed) { struct rt2x00_dev *rt2x00dev = hw->priv; + struct ieee80211_conf *conf = &hw->conf; int radio_on; int status; diff --git a/drivers/net/wireless/rtl8180_dev.c b/drivers/net/wireless/rtl8180_dev.c index 9de8f57486d..e8d22393797 100644 --- a/drivers/net/wireless/rtl8180_dev.c +++ b/drivers/net/wireless/rtl8180_dev.c @@ -692,9 +692,10 @@ static void rtl8180_remove_interface(struct ieee80211_hw *dev, priv->vif = NULL; } -static int rtl8180_config(struct ieee80211_hw *dev, struct ieee80211_conf *conf) +static int rtl8180_config(struct ieee80211_hw *dev, u32 changed) { struct rtl8180_priv *priv = dev->priv; + struct ieee80211_conf *conf = &dev->conf; priv->rf->set_chan(dev, conf); diff --git a/drivers/net/wireless/rtl8187_dev.c b/drivers/net/wireless/rtl8187_dev.c index 9ceae9017f8..2c69ab37c65 100644 --- a/drivers/net/wireless/rtl8187_dev.c +++ b/drivers/net/wireless/rtl8187_dev.c @@ -873,9 +873,10 @@ static void rtl8187_remove_interface(struct ieee80211_hw *dev, mutex_unlock(&priv->conf_mutex); } -static int rtl8187_config(struct ieee80211_hw *dev, struct ieee80211_conf *conf) +static int rtl8187_config(struct ieee80211_hw *dev, u32 changed) { struct rtl8187_priv *priv = dev->priv; + struct ieee80211_conf *conf = &dev->conf; u32 reg; mutex_lock(&priv->conf_mutex); diff --git a/drivers/net/wireless/zd1211rw/zd_mac.c b/drivers/net/wireless/zd1211rw/zd_mac.c index de45509d757..6c3e21887fc 100644 --- a/drivers/net/wireless/zd1211rw/zd_mac.c +++ b/drivers/net/wireless/zd1211rw/zd_mac.c @@ -743,9 +743,11 @@ static void zd_op_remove_interface(struct ieee80211_hw *hw, zd_write_mac_addr(&mac->chip, NULL); } -static int zd_op_config(struct ieee80211_hw *hw, struct ieee80211_conf *conf) +static int zd_op_config(struct ieee80211_hw *hw, u32 changed) { struct zd_mac *mac = zd_hw_mac(hw); + struct ieee80211_conf *conf = &hw->conf; + return zd_chip_set_channel(&mac->chip, conf->channel->hw_value); } diff --git a/include/net/mac80211.h b/include/net/mac80211.h index 5f28b7f8988..34e8569b59b 100644 --- a/include/net/mac80211.h +++ b/include/net/mac80211.h @@ -463,13 +463,33 @@ static inline int __deprecated __IEEE80211_CONF_SHORT_SLOT_TIME(void) } #define IEEE80211_CONF_SHORT_SLOT_TIME (__IEEE80211_CONF_SHORT_SLOT_TIME()) +/** + * enum ieee80211_conf_changed - denotes which configuration changed + * + * @IEEE80211_CONF_CHANGE_RADIO_ENABLED: the value of radio_enabled changed + * @IEEE80211_CONF_CHANGE_BEACON_INTERVAL: the beacon interval changed + * @IEEE80211_CONF_CHANGE_LISTEN_INTERVAL: the listen interval changed + * @IEEE80211_CONF_CHANGE_RADIOTAP: the radiotap flag changed + * @IEEE80211_CONF_CHANGE_PS: the PS flag changed + * @IEEE80211_CONF_CHANGE_POWER: the TX power changed + * @IEEE80211_CONF_CHANGE_CHANNEL: the channel changed + */ +enum ieee80211_conf_changed { + IEEE80211_CONF_CHANGE_RADIO_ENABLED = BIT(0), + IEEE80211_CONF_CHANGE_BEACON_INTERVAL = BIT(1), + IEEE80211_CONF_CHANGE_LISTEN_INTERVAL = BIT(2), + IEEE80211_CONF_CHANGE_RADIOTAP = BIT(3), + IEEE80211_CONF_CHANGE_PS = BIT(4), + IEEE80211_CONF_CHANGE_POWER = BIT(5), + IEEE80211_CONF_CHANGE_CHANNEL = BIT(6), +}; + /** * struct ieee80211_conf - configuration of the device * * This struct indicates how the driver shall configure the hardware. * * @radio_enabled: when zero, driver is required to switch off the radio. - * TODO make a flag * @beacon_int: beacon interval (TODO make interface config) * @listen_interval: listen interval in units of beacon interval * @flags: configuration flags defined above @@ -479,13 +499,13 @@ static inline int __deprecated __IEEE80211_CONF_SHORT_SLOT_TIME(void) * @channel: the channel to tune to */ struct ieee80211_conf { - int radio_enabled; - int beacon_int; - u16 listen_interval; u32 flags; int power_level; + u16 listen_interval; + bool radio_enabled; + struct ieee80211_channel *channel; struct ieee80211_sta_ht_cap ht_cap; @@ -1214,7 +1234,7 @@ struct ieee80211_ops { struct ieee80211_if_init_conf *conf); void (*remove_interface)(struct ieee80211_hw *hw, struct ieee80211_if_init_conf *conf); - int (*config)(struct ieee80211_hw *hw, struct ieee80211_conf *conf); + int (*config)(struct ieee80211_hw *hw, u32 changed); int (*config_interface)(struct ieee80211_hw *hw, struct ieee80211_vif *vif, struct ieee80211_if_conf *conf); diff --git a/net/mac80211/cfg.c b/net/mac80211/cfg.c index a5dea617aab..8ea30902d5d 100644 --- a/net/mac80211/cfg.c +++ b/net/mac80211/cfg.c @@ -394,7 +394,8 @@ static int ieee80211_config_beacon(struct ieee80211_sub_if_data *sdata, */ if (params->interval) { sdata->local->hw.conf.beacon_int = params->interval; - ieee80211_hw_config(sdata->local); + ieee80211_hw_config(sdata->local, + IEEE80211_CONF_CHANGE_BEACON_INTERVAL); /* * We updated some parameter so if below bails out * it's not an error. diff --git a/net/mac80211/ieee80211_i.h b/net/mac80211/ieee80211_i.h index 88015838a63..1deb787ff8d 100644 --- a/net/mac80211/ieee80211_i.h +++ b/net/mac80211/ieee80211_i.h @@ -875,7 +875,7 @@ static inline int ieee80211_bssid_match(const u8 *raddr, const u8 *addr) } -int ieee80211_hw_config(struct ieee80211_local *local); +int ieee80211_hw_config(struct ieee80211_local *local, u32 changed); int ieee80211_if_config(struct ieee80211_sub_if_data *sdata, u32 changed); void ieee80211_tx_set_protected(struct ieee80211_tx_data *tx); void ieee80211_bss_info_change_notify(struct ieee80211_sub_if_data *sdata, diff --git a/net/mac80211/iface.c b/net/mac80211/iface.c index 8336fee68d3..df28c5f7c9c 100644 --- a/net/mac80211/iface.c +++ b/net/mac80211/iface.c @@ -65,7 +65,7 @@ static int ieee80211_open(struct net_device *dev) struct ieee80211_if_init_conf conf; u32 changed = 0; int res; - bool need_hw_reconfig = 0; + u32 hw_reconf_flags = 0; u8 null_addr[ETH_ALEN] = {0}; /* fail early if user set an invalid address */ @@ -152,7 +152,8 @@ static int ieee80211_open(struct net_device *dev) res = local->ops->start(local_to_hw(local)); if (res) goto err_del_bss; - need_hw_reconfig = 1; + /* we're brought up, everything changes */ + hw_reconf_flags = ~0; ieee80211_led_radio(local, local->hw.conf.radio_enabled); } @@ -198,8 +199,10 @@ static int ieee80211_open(struct net_device *dev) /* must be before the call to ieee80211_configure_filter */ local->monitors++; - if (local->monitors == 1) + if (local->monitors == 1) { local->hw.conf.flags |= IEEE80211_CONF_RADIOTAP; + hw_reconf_flags |= IEEE80211_CONF_CHANGE_RADIOTAP; + } if (sdata->u.mntr_flags & MONITOR_FLAG_FCSFAIL) local->fif_fcsfail++; @@ -279,8 +282,8 @@ static int ieee80211_open(struct net_device *dev) atomic_inc(&local->iff_promiscs); local->open_count++; - if (need_hw_reconfig) { - ieee80211_hw_config(local); + if (hw_reconf_flags) { + ieee80211_hw_config(local, hw_reconf_flags); /* * set default queue parameters so drivers don't * need to initialise the hardware if the hardware @@ -322,6 +325,7 @@ static int ieee80211_stop(struct net_device *dev) struct ieee80211_local *local = sdata->local; struct ieee80211_if_init_conf conf; struct sta_info *sta; + u32 hw_reconf_flags = 0; /* * Stop TX on this interface first. @@ -405,8 +409,10 @@ static int ieee80211_stop(struct net_device *dev) } local->monitors--; - if (local->monitors == 0) + if (local->monitors == 0) { local->hw.conf.flags &= ~IEEE80211_CONF_RADIOTAP; + hw_reconf_flags |= IEEE80211_CONF_CHANGE_RADIOTAP; + } if (sdata->u.mntr_flags & MONITOR_FLAG_FCSFAIL) local->fif_fcsfail--; @@ -504,8 +510,15 @@ static int ieee80211_stop(struct net_device *dev) tasklet_disable(&local->tx_pending_tasklet); tasklet_disable(&local->tasklet); + + /* no reconfiguring after stop! */ + hw_reconf_flags = 0; } + /* do after stop to avoid reconfiguring when we stop anyway */ + if (hw_reconf_flags) + ieee80211_hw_config(local, hw_reconf_flags); + return 0; } diff --git a/net/mac80211/main.c b/net/mac80211/main.c index 07f812755e5..c936017f6d4 100644 --- a/net/mac80211/main.c +++ b/net/mac80211/main.c @@ -197,31 +197,34 @@ int ieee80211_if_config(struct ieee80211_sub_if_data *sdata, u32 changed) &sdata->vif, &conf); } -int ieee80211_hw_config(struct ieee80211_local *local) +int ieee80211_hw_config(struct ieee80211_local *local, u32 changed) { struct ieee80211_channel *chan; int ret = 0; + int power; if (local->sw_scanning) chan = local->scan_channel; else chan = local->oper_channel; - local->hw.conf.channel = chan; + if (chan != local->hw.conf.channel) { + local->hw.conf.channel = chan; + changed |= IEEE80211_CONF_CHANGE_CHANNEL; + } + if (!local->hw.conf.power_level) - local->hw.conf.power_level = chan->max_power; + power = chan->max_power; else - local->hw.conf.power_level = min(chan->max_power, - local->hw.conf.power_level); - -#ifdef CONFIG_MAC80211_VERBOSE_DEBUG - printk(KERN_DEBUG "%s: HW CONFIG: freq=%d\n", - wiphy_name(local->hw.wiphy), chan->center_freq); -#endif + power = min(chan->max_power, local->hw.conf.power_level); + if (local->hw.conf.power_level != power) { + changed |= IEEE80211_CONF_CHANGE_POWER; + local->hw.conf.power_level = power; + } - if (local->open_count) { - ret = local->ops->config(local_to_hw(local), &local->hw.conf); + if (changed && local->open_count) { + ret = local->ops->config(local_to_hw(local), changed); /* * HW reconfiguration should never fail, the driver has told * us what it can support so it should live up to that promise. @@ -672,7 +675,7 @@ struct ieee80211_hw *ieee80211_alloc_hw(size_t priv_data_len, local->fragmentation_threshold = IEEE80211_MAX_FRAG_THRESHOLD; local->short_retry_limit = 7; local->long_retry_limit = 4; - local->hw.conf.radio_enabled = 1; + local->hw.conf.radio_enabled = true; INIT_LIST_HEAD(&local->interfaces); diff --git a/net/mac80211/scan.c b/net/mac80211/scan.c index 0989b1c062e..7372d7abb8c 100644 --- a/net/mac80211/scan.c +++ b/net/mac80211/scan.c @@ -448,12 +448,17 @@ void ieee80211_scan_completed(struct ieee80211_hw *hw) if (local->hw_scanning) { local->hw_scanning = false; - ieee80211_hw_config(local); + /* + * Somebody might have requested channel change during scan + * that we won't have acted upon, try now. ieee80211_hw_config + * will set the flag based on actual changes. + */ + ieee80211_hw_config(local, 0); goto done; } local->sw_scanning = false; - ieee80211_hw_config(local); + ieee80211_hw_config(local, IEEE80211_CONF_CHANGE_CHANNEL); netif_tx_lock_bh(local->mdev); netif_addr_lock(local->mdev); @@ -540,7 +545,8 @@ void ieee80211_scan_work(struct work_struct *work) if (!skip) { local->scan_channel = chan; - if (ieee80211_hw_config(local)) + if (ieee80211_hw_config(local, + IEEE80211_CONF_CHANGE_CHANNEL)) skip = 1; } diff --git a/net/mac80211/util.c b/net/mac80211/util.c index 9941a60a232..3288c3de67c 100644 --- a/net/mac80211/util.c +++ b/net/mac80211/util.c @@ -645,7 +645,8 @@ int ieee80211_set_freq(struct ieee80211_sub_if_data *sdata, int freqMHz) if (local->sw_scanning || local->hw_scanning) ret = 0; else - ret = ieee80211_hw_config(local); + ret = ieee80211_hw_config( + local, IEEE80211_CONF_CHANGE_CHANNEL); rate_control_clear(local); } diff --git a/net/mac80211/wext.c b/net/mac80211/wext.c index a3af1514124..94c4b35eeb1 100644 --- a/net/mac80211/wext.c +++ b/net/mac80211/wext.c @@ -656,7 +656,7 @@ static int ieee80211_ioctl_siwtxpower(struct net_device *dev, union iwreq_data *data, char *extra) { struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr); - bool need_reconfig = 0; + u32 reconf_flags = 0; int new_power_level; if ((data->txpower.flags & IW_TXPOW_TYPE) != IW_TXPOW_DBM) @@ -680,17 +680,17 @@ static int ieee80211_ioctl_siwtxpower(struct net_device *dev, if (local->hw.conf.power_level != new_power_level) { local->hw.conf.power_level = new_power_level; - need_reconfig = 1; + reconf_flags |= IEEE80211_CONF_CHANGE_POWER; } if (local->hw.conf.radio_enabled != !(data->txpower.disabled)) { local->hw.conf.radio_enabled = !(data->txpower.disabled); - need_reconfig = 1; + reconf_flags |= IEEE80211_CONF_CHANGE_RADIO_ENABLED; ieee80211_led_radio(local, local->hw.conf.radio_enabled); } - if (need_reconfig) - ieee80211_hw_config(local); + if (reconf_flags) + ieee80211_hw_config(local, reconf_flags); return 0; } @@ -976,7 +976,7 @@ static int ieee80211_ioctl_siwpower(struct net_device *dev, if (wrq->disabled) { conf->flags &= ~IEEE80211_CONF_PS; - return ieee80211_hw_config(local); + return ieee80211_hw_config(local, IEEE80211_CONF_CHANGE_PS); } switch (wrq->flags & IW_POWER_MODE) { @@ -989,7 +989,7 @@ static int ieee80211_ioctl_siwpower(struct net_device *dev, return -EINVAL; } - return ieee80211_hw_config(local); + return ieee80211_hw_config(local, IEEE80211_CONF_CHANGE_PS); } static int ieee80211_ioctl_giwpower(struct net_device *dev, -- cgit v1.2.3-70-g09d2 From e6a9854b05c1a6af1308fe2b8c68f35abf28a3ee Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Tue, 21 Oct 2008 12:40:02 +0200 Subject: mac80211/drivers: rewrite the rate control API So after the previous changes we were still unhappy with how convoluted the API is and decided to make things simpler for everybody. This completely changes the rate control API, now taking into account 802.11n with MCS rates and more control, most drivers don't support that though. Signed-off-by: Felix Fietkau Signed-off-by: Johannes Berg Signed-off-by: John W. Linville --- drivers/net/wireless/adm8211.c | 21 +- drivers/net/wireless/ath5k/base.c | 34 ++- drivers/net/wireless/ath9k/main.c | 18 +- drivers/net/wireless/ath9k/rc.c | 40 +-- drivers/net/wireless/ath9k/xmit.c | 28 ++- drivers/net/wireless/b43/dma.c | 4 +- drivers/net/wireless/b43/main.c | 2 +- drivers/net/wireless/b43/pio.c | 3 +- drivers/net/wireless/b43/xmit.c | 60 ++++- drivers/net/wireless/b43/xmit.h | 5 +- drivers/net/wireless/b43legacy/dma.c | 46 ++-- drivers/net/wireless/b43legacy/main.c | 2 +- drivers/net/wireless/b43legacy/pio.c | 31 ++- drivers/net/wireless/b43legacy/xmit.c | 26 +- drivers/net/wireless/b43legacy/xmit.h | 2 +- drivers/net/wireless/iwlwifi/iwl-3945-rs.c | 57 ++--- drivers/net/wireless/iwlwifi/iwl-3945.c | 65 ++++- drivers/net/wireless/iwlwifi/iwl-3945.h | 2 + drivers/net/wireless/iwlwifi/iwl-4965.c | 8 +- drivers/net/wireless/iwlwifi/iwl-5000.c | 8 +- drivers/net/wireless/iwlwifi/iwl-agn-rs.c | 37 ++- drivers/net/wireless/iwlwifi/iwl-core.c | 19 +- drivers/net/wireless/iwlwifi/iwl3945-base.c | 5 +- drivers/net/wireless/libertas_tf/main.c | 4 +- drivers/net/wireless/mac80211_hwsim.c | 12 +- drivers/net/wireless/p54/p54common.c | 26 +- drivers/net/wireless/rt2x00/rt2x00dev.c | 14 +- drivers/net/wireless/rt2x00/rt2x00mac.c | 14 +- drivers/net/wireless/rt2x00/rt2x00queue.c | 22 +- drivers/net/wireless/rt2x00/rt2x00queue.h | 9 +- drivers/net/wireless/rtl8180_dev.c | 28 +-- drivers/net/wireless/rtl8187_dev.c | 18 +- drivers/net/wireless/zd1211rw/zd_mac.c | 32 +-- drivers/net/wireless/zd1211rw/zd_usb.c | 2 +- include/net/mac80211.h | 254 +++++++++++-------- net/mac80211/ieee80211_i.h | 8 - net/mac80211/main.c | 54 +++- net/mac80211/mesh_hwmp.c | 6 +- net/mac80211/rate.c | 52 ++-- net/mac80211/rate.h | 5 +- net/mac80211/rc80211_minstrel.c | 72 +++--- net/mac80211/rc80211_pid.h | 1 + net/mac80211/rc80211_pid_algo.c | 27 +- net/mac80211/rc80211_pid_debugfs.c | 5 +- net/mac80211/sta_info.h | 4 +- net/mac80211/tx.c | 378 +++++++++++++--------------- net/mac80211/wext.c | 4 +- 47 files changed, 889 insertions(+), 685 deletions(-) (limited to 'drivers/net/wireless/zd1211rw/zd_mac.c') diff --git a/drivers/net/wireless/adm8211.c b/drivers/net/wireless/adm8211.c index 9a1e0c514c0..b96ebfe4ef3 100644 --- a/drivers/net/wireless/adm8211.c +++ b/drivers/net/wireless/adm8211.c @@ -341,15 +341,14 @@ static void adm8211_interrupt_tci(struct ieee80211_hw *dev) pci_unmap_single(priv->pdev, info->mapping, info->skb->len, PCI_DMA_TODEVICE); - memset(&txi->status, 0, sizeof(txi->status)); + ieee80211_tx_info_clear_status(txi); + skb_pull(skb, sizeof(struct adm8211_tx_hdr)); memcpy(skb_push(skb, info->hdrlen), skb->cb, info->hdrlen); - if (!(txi->flags & IEEE80211_TX_CTL_NO_ACK)) { - if (status & TDES0_STATUS_ES) - txi->status.excessive_retries = 1; - else - txi->flags |= IEEE80211_TX_STAT_ACK; - } + if (!(txi->flags & IEEE80211_TX_CTL_NO_ACK) && + !(status & TDES0_STATUS_ES)) + txi->flags |= IEEE80211_TX_STAT_ACK; + ieee80211_tx_status_irqsafe(dev, skb); info->skb = NULL; @@ -1691,8 +1690,10 @@ static int adm8211_tx(struct ieee80211_hw *dev, struct sk_buff *skb) struct ieee80211_hdr *hdr; struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb); struct ieee80211_rate *txrate = ieee80211_get_tx_rate(dev, info); + u8 rc_flags; - short_preamble = !!(txrate->flags & IEEE80211_TX_CTL_SHORT_PREAMBLE); + rc_flags = info->control.rates[0].flags; + short_preamble = !!(rc_flags & IEEE80211_TX_RC_USE_SHORT_PREAMBLE); plcp_signal = txrate->bitrate; hdr = (struct ieee80211_hdr *)skb->data; @@ -1724,10 +1725,10 @@ static int adm8211_tx(struct ieee80211_hw *dev, struct sk_buff *skb) if (short_preamble) txhdr->header_control |= cpu_to_le16(ADM8211_TXHDRCTL_SHORT_PREAMBLE); - if (info->flags & IEEE80211_TX_CTL_USE_RTS_CTS) + if (rc_flags & IEEE80211_TX_RC_USE_RTS_CTS) txhdr->header_control |= cpu_to_le16(ADM8211_TXHDRCTL_ENABLE_RTS); - txhdr->retry_limit = info->control.retry_limit; + txhdr->retry_limit = info->control.rates[0].count; adm8211_tx_raw(dev, skb, plcp_signal, hdrlen); diff --git a/drivers/net/wireless/ath5k/base.c b/drivers/net/wireless/ath5k/base.c index 44401f6f578..3773d983ea6 100644 --- a/drivers/net/wireless/ath5k/base.c +++ b/drivers/net/wireless/ath5k/base.c @@ -541,8 +541,8 @@ ath5k_pci_probe(struct pci_dev *pdev, /* set up multi-rate retry capabilities */ if (sc->ah->ah_version == AR5K_AR5212) { - hw->max_altrates = 3; - hw->max_altrate_tries = 11; + hw->max_rates = 4; + hw->max_rate_tries = 11; } /* Finish private driver data initialization */ @@ -1181,7 +1181,7 @@ ath5k_txbuf_setup(struct ath5k_softc *sc, struct ath5k_buf *bf) ieee80211_get_hdrlen_from_skb(skb), AR5K_PKT_TYPE_NORMAL, (sc->power_level * 2), ieee80211_get_tx_rate(sc->hw, info)->hw_value, - info->control.retry_limit, keyidx, 0, flags, 0, 0); + info->control.rates[0].count, keyidx, 0, flags, 0, 0); if (ret) goto err_unmap; @@ -1193,7 +1193,7 @@ ath5k_txbuf_setup(struct ath5k_softc *sc, struct ath5k_buf *bf) break; mrr_rate[i] = rate->hw_value; - mrr_tries[i] = info->control.retries[i].limit; + mrr_tries[i] = info->control.rates[i + 1].count; } ah->ah_setup_mrr_tx_desc(ah, ds, @@ -1849,30 +1849,26 @@ ath5k_tx_processq(struct ath5k_softc *sc, struct ath5k_txq *txq) pci_unmap_single(sc->pdev, bf->skbaddr, skb->len, PCI_DMA_TODEVICE); - memset(&info->status, 0, sizeof(info->status)); - info->tx_rate_idx = ath5k_hw_to_driver_rix(sc, - ts.ts_rate[ts.ts_final_idx]); - info->status.retry_count = ts.ts_longretry; - + ieee80211_tx_info_clear_status(info); for (i = 0; i < 4; i++) { - struct ieee80211_tx_altrate *r = - &info->status.retries[i]; + struct ieee80211_tx_rate *r = + &info->status.rates[i]; if (ts.ts_rate[i]) { - r->rate_idx = ath5k_hw_to_driver_rix(sc, ts.ts_rate[i]); - r->limit = ts.ts_retry[i]; + r->idx = ath5k_hw_to_driver_rix(sc, ts.ts_rate[i]); + r->count = ts.ts_retry[i]; } else { - r->rate_idx = -1; - r->limit = 0; + r->idx = -1; + r->count = 0; } } - info->status.excessive_retries = 0; + /* count the successful attempt as well */ + info->status.rates[ts.ts_final_idx].count++; + if (unlikely(ts.ts_status)) { sc->ll_stats.dot11ACKFailureCount++; - if (ts.ts_status & AR5K_TXERR_XRETRY) - info->status.excessive_retries = 1; - else if (ts.ts_status & AR5K_TXERR_FILT) + if (ts.ts_status & AR5K_TXERR_FILT) info->flags |= IEEE80211_TX_STAT_TX_FILTERED; } else { info->flags |= IEEE80211_TX_STAT_ACK; diff --git a/drivers/net/wireless/ath9k/main.c b/drivers/net/wireless/ath9k/main.c index 32acaf7ff62..a7656a3ea1b 100644 --- a/drivers/net/wireless/ath9k/main.c +++ b/drivers/net/wireless/ath9k/main.c @@ -457,12 +457,13 @@ void ath_tx_complete(struct ath_softc *sc, struct sk_buff *skb, DPRINTF(sc, ATH_DBG_XMIT, "%s: TX complete: skb: %p\n", __func__, skb); + ieee80211_tx_info_clear_status(tx_info); if (tx_info->flags & IEEE80211_TX_CTL_NO_ACK || tx_info->flags & IEEE80211_TX_STAT_TX_FILTERED) { - /* free driver's private data area of tx_info */ - if (tx_info->driver_data[0] != NULL) - kfree(tx_info->driver_data[0]); - tx_info->driver_data[0] = NULL; + /* free driver's private data area of tx_info, XXX: HACK! */ + if (tx_info->control.vif != NULL) + kfree(tx_info->control.vif); + tx_info->control.vif = NULL; } if (tx_status->flags & ATH_TX_BAR) { @@ -470,17 +471,12 @@ void ath_tx_complete(struct ath_softc *sc, struct sk_buff *skb, tx_status->flags &= ~ATH_TX_BAR; } - if (tx_status->flags & (ATH_TX_ERROR | ATH_TX_XRETRY)) { - if (!(tx_info->flags & IEEE80211_TX_CTL_NO_ACK)) { - /* Frame was not ACKed, but an ACK was expected */ - tx_info->status.excessive_retries = 1; - } - } else { + if (!(tx_status->flags & (ATH_TX_ERROR | ATH_TX_XRETRY))) { /* Frame was ACKed */ tx_info->flags |= IEEE80211_TX_STAT_ACK; } - tx_info->status.retry_count = tx_status->retries; + tx_info->status.rates[0].count = tx_status->retries + 1; ieee80211_tx_status(hw, skb); if (an) diff --git a/drivers/net/wireless/ath9k/rc.c b/drivers/net/wireless/ath9k/rc.c index 9b252603096..6afafeddeda 100644 --- a/drivers/net/wireless/ath9k/rc.c +++ b/drivers/net/wireless/ath9k/rc.c @@ -1864,24 +1864,21 @@ static void ath_tx_status(void *priv, struct ieee80211_supported_band *sband, hdr = (struct ieee80211_hdr *)skb->data; fc = hdr->frame_control; - tx_info_priv = (struct ath_tx_info_priv *)tx_info->driver_data[0]; + /* XXX: UGLY HACK!! */ + tx_info_priv = (struct ath_tx_info_priv *)tx_info->control.vif; spin_lock_bh(&sc->node_lock); an = ath_node_find(sc, hdr->addr1); spin_unlock_bh(&sc->node_lock); - if (!an || !priv_sta || !ieee80211_is_data(fc)) { - if (tx_info->driver_data[0] != NULL) { - kfree(tx_info->driver_data[0]); - tx_info->driver_data[0] = NULL; - } + if (tx_info_priv == NULL) return; - } - if (tx_info->driver_data[0] != NULL) { + + if (an && priv_sta && ieee80211_is_data(fc)) ath_rate_tx_complete(sc, an, priv_sta, tx_info_priv); - kfree(tx_info->driver_data[0]); - tx_info->driver_data[0] = NULL; - } + + kfree(tx_info_priv); + tx_info->control.vif = NULL; } static void ath_tx_aggr_resp(struct ath_softc *sc, @@ -1927,10 +1924,11 @@ static void ath_tx_aggr_resp(struct ath_softc *sc, } } -static void ath_get_rate(void *priv, struct ieee80211_supported_band *sband, - struct ieee80211_sta *sta, void *priv_sta, - struct sk_buff *skb, struct rate_selection *sel) +static void ath_get_rate(void *priv, struct ieee80211_sta *sta, void *priv_sta, + struct ieee80211_tx_rate_control *txrc) { + struct ieee80211_supported_band *sband = txrc->sband; + struct sk_buff *skb = txrc->skb; struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)skb->data; struct ath_softc *sc = priv; struct ieee80211_hw *hw = sc->hw; @@ -1945,17 +1943,17 @@ static void ath_get_rate(void *priv, struct ieee80211_supported_band *sband, DPRINTF(sc, ATH_DBG_RATE, "%s\n", __func__); - /* allocate driver private area of tx_info */ - tx_info->driver_data[0] = kzalloc(sizeof(*tx_info_priv), GFP_ATOMIC); - ASSERT(tx_info->driver_data[0] != NULL); - tx_info_priv = (struct ath_tx_info_priv *)tx_info->driver_data[0]; + /* allocate driver private area of tx_info, XXX: UGLY HACK! */ + tx_info->control.vif = kzalloc(sizeof(*tx_info_priv), GFP_ATOMIC); + tx_info_priv = (struct ath_tx_info_priv *)tx_info->control.vif; + ASSERT(tx_info_priv != NULL); lowest_idx = rate_lowest_index(sband, sta); tx_info_priv->min_rate = (sband->bitrates[lowest_idx].bitrate * 2) / 10; /* lowest rate for management and multicast/broadcast frames */ if (!ieee80211_is_data(fc) || is_multicast_ether_addr(hdr->addr1) || !sta) { - sel->rate_idx = lowest_idx; + tx_info->control.rates[0].idx = lowest_idx; return; } @@ -1966,8 +1964,10 @@ static void ath_get_rate(void *priv, struct ieee80211_supported_band *sband, tx_info_priv->rcs, &is_probe, false); +#if 0 if (is_probe) sel->probe_idx = ath_rc_priv->tx_ratectrl.probe_rate; +#endif /* Ratecontrol sometimes returns invalid rate index */ if (tx_info_priv->rcs[0].rix != 0xff) @@ -1975,7 +1975,7 @@ static void ath_get_rate(void *priv, struct ieee80211_supported_band *sband, else tx_info_priv->rcs[0].rix = ath_rc_priv->prev_data_rix; - sel->rate_idx = tx_info_priv->rcs[0].rix; + tx_info->control.rates[0].idx = tx_info_priv->rcs[0].rix; /* Check if aggregation has to be enabled for this tid */ diff --git a/drivers/net/wireless/ath9k/xmit.c b/drivers/net/wireless/ath9k/xmit.c index ba818cc2fb5..9fa395418a6 100644 --- a/drivers/net/wireless/ath9k/xmit.c +++ b/drivers/net/wireless/ath9k/xmit.c @@ -168,7 +168,9 @@ static void fill_min_rates(struct sk_buff *skb, struct ath_tx_control *txctl) hdr = (struct ieee80211_hdr *)skb->data; fc = hdr->frame_control; - tx_info_priv = (struct ath_tx_info_priv *)tx_info->driver_data[0]; + + /* XXX: HACK! */ + tx_info_priv = (struct ath_tx_info_priv *)tx_info->control.vif; if (ieee80211_is_mgmt(fc) || ieee80211_is_ctl(fc)) { txctl->use_minrate = 1; @@ -288,13 +290,16 @@ static int ath_tx_prepare(struct ath_softc *sc, if (tx_info->flags & IEEE80211_TX_CTL_NO_ACK) txctl->flags |= ATH9K_TXDESC_NOACK; - if (tx_info->flags & IEEE80211_TX_CTL_USE_RTS_CTS) + + if (tx_info->control.rates[0].flags & IEEE80211_TX_RC_USE_RTS_CTS) txctl->flags |= ATH9K_TXDESC_RTSENA; /* * Setup for rate calculations. */ - tx_info_priv = (struct ath_tx_info_priv *)tx_info->driver_data[0]; + + /* XXX: HACK! */ + tx_info_priv = (struct ath_tx_info_priv *)tx_info->control.vif; rcs = tx_info_priv->rcs; if (ieee80211_is_data(fc) && !txctl->use_minrate) { @@ -855,7 +860,9 @@ static int ath_tx_send_normal(struct ath_softc *sc, skb = (struct sk_buff *)bf->bf_mpdu; tx_info = IEEE80211_SKB_CB(skb); - tx_info_priv = (struct ath_tx_info_priv *)tx_info->driver_data[0]; + + /* XXX: HACK! */ + tx_info_priv = (struct ath_tx_info_priv *)tx_info->control.vif; memcpy(bf->bf_rcs, tx_info_priv->rcs, 4 * sizeof(tx_info_priv->rcs[0])); /* update starting sequence number for subsequent ADDBA request */ @@ -1249,8 +1256,9 @@ static int ath_tx_processq(struct ath_softc *sc, struct ath_txq *txq) } skb = bf->bf_mpdu; tx_info = IEEE80211_SKB_CB(skb); - tx_info_priv = (struct ath_tx_info_priv *) - tx_info->driver_data[0]; + + /* XXX: HACK! */ + tx_info_priv = (struct ath_tx_info_priv *) tx_info->control.vif; if (ds->ds_txstat.ts_status & ATH9K_TXERR_FILT) tx_info->flags |= IEEE80211_TX_STAT_TX_FILTERED; if ((ds->ds_txstat.ts_status & ATH9K_TXERR_FILT) == 0 && @@ -1431,7 +1439,8 @@ static int ath_tx_send_ampdu(struct ath_softc *sc, skb = (struct sk_buff *)bf->bf_mpdu; tx_info = IEEE80211_SKB_CB(skb); - tx_info_priv = (struct ath_tx_info_priv *)tx_info->driver_data[0]; + /* XXX: HACK! */ + tx_info_priv = (struct ath_tx_info_priv *)tx_info->control.vif; memcpy(bf->bf_rcs, tx_info_priv->rcs, 4 * sizeof(tx_info_priv->rcs[0])); /* Add sub-frame to BAW */ @@ -1466,7 +1475,7 @@ static u32 ath_lookup_rate(struct ath_softc *sc, skb = (struct sk_buff *)bf->bf_mpdu; tx_info = IEEE80211_SKB_CB(skb); tx_info_priv = (struct ath_tx_info_priv *) - tx_info->driver_data[0]; + tx_info->control.vif; /* XXX: HACK! */ memcpy(bf->bf_rcs, tx_info_priv->rcs, 4 * sizeof(tx_info_priv->rcs[0])); @@ -1927,7 +1936,8 @@ static int ath_tx_start_dma(struct ath_softc *sc, bf->bf_flags = txctl->flags; bf->bf_keytype = txctl->keytype; - tx_info_priv = (struct ath_tx_info_priv *)tx_info->driver_data[0]; + /* XXX: HACK! */ + tx_info_priv = (struct ath_tx_info_priv *)tx_info->control.vif; rcs = tx_info_priv->rcs; bf->bf_rcs[0] = rcs[0]; bf->bf_rcs[1] = rcs[1]; diff --git a/drivers/net/wireless/b43/dma.c b/drivers/net/wireless/b43/dma.c index 098f886976f..6d65a02b705 100644 --- a/drivers/net/wireless/b43/dma.c +++ b/drivers/net/wireless/b43/dma.c @@ -1387,13 +1387,11 @@ void b43_dma_handle_txstatus(struct b43_wldev *dev, info = IEEE80211_SKB_CB(meta->skb); - memset(&info->status, 0, sizeof(info->status)); - /* * Call back to inform the ieee80211 subsystem about * the status of the transmission. */ - frame_succeed = b43_fill_txstatus_report(info, status); + frame_succeed = b43_fill_txstatus_report(dev, info, status); #ifdef CONFIG_B43_DEBUG if (frame_succeed) ring->nr_succeed_tx_packets++; diff --git a/drivers/net/wireless/b43/main.c b/drivers/net/wireless/b43/main.c index 9aeeb6553a9..2a599fb772d 100644 --- a/drivers/net/wireless/b43/main.c +++ b/drivers/net/wireless/b43/main.c @@ -4555,7 +4555,7 @@ static int b43_wireless_init(struct ssb_device *dev) BIT(NL80211_IFTYPE_ADHOC); hw->queues = b43_modparam_qos ? 4 : 1; - hw->max_altrates = 1; + hw->max_rates = 2; SET_IEEE80211_DEV(hw, dev->dev); if (is_valid_ether_addr(sprom->et1mac)) SET_IEEE80211_PERM_ADDR(hw, sprom->et1mac); diff --git a/drivers/net/wireless/b43/pio.c b/drivers/net/wireless/b43/pio.c index 40159126759..1036bef8c4c 100644 --- a/drivers/net/wireless/b43/pio.c +++ b/drivers/net/wireless/b43/pio.c @@ -587,9 +587,8 @@ void b43_pio_handle_txstatus(struct b43_wldev *dev, spin_lock(&q->lock); /* IRQs are already disabled. */ info = IEEE80211_SKB_CB(pack->skb); - memset(&info->status, 0, sizeof(info->status)); - b43_fill_txstatus_report(info, status); + b43_fill_txstatus_report(dev, info, status); total_len = pack->skb->len + b43_txhdr_size(dev); total_len = roundup(total_len, 4); diff --git a/drivers/net/wireless/b43/xmit.c b/drivers/net/wireless/b43/xmit.c index 2fabcf8f047..adba89b816d 100644 --- a/drivers/net/wireless/b43/xmit.c +++ b/drivers/net/wireless/b43/xmit.c @@ -185,7 +185,7 @@ int b43_generate_txhdr(struct b43_wldev *dev, u8 *_txhdr, const unsigned char *fragment_data, unsigned int fragment_len, - const struct ieee80211_tx_info *info, + struct ieee80211_tx_info *info, u16 cookie) { struct b43_txhdr *txhdr = (struct b43_txhdr *)_txhdr; @@ -202,6 +202,7 @@ int b43_generate_txhdr(struct b43_wldev *dev, u16 phy_ctl = 0; u8 extra_ft = 0; struct ieee80211_rate *txrate; + struct ieee80211_tx_rate *rates; memset(txhdr, 0, sizeof(*txhdr)); @@ -291,7 +292,7 @@ int b43_generate_txhdr(struct b43_wldev *dev, phy_ctl |= B43_TXH_PHY_ENC_OFDM; else phy_ctl |= B43_TXH_PHY_ENC_CCK; - if (info->flags & IEEE80211_TX_CTL_SHORT_PREAMBLE) + if (info->control.rates[0].flags & IEEE80211_TX_RC_USE_SHORT_PREAMBLE) phy_ctl |= B43_TXH_PHY_SHORTPRMBL; switch (b43_ieee80211_antenna_sanitize(dev, info->antenna_sel_tx)) { @@ -314,6 +315,7 @@ int b43_generate_txhdr(struct b43_wldev *dev, B43_WARN_ON(1); } + rates = info->control.rates; /* MAC control */ if (!(info->flags & IEEE80211_TX_CTL_NO_ACK)) mac_ctl |= B43_TXH_MAC_ACK; @@ -324,12 +326,22 @@ int b43_generate_txhdr(struct b43_wldev *dev, mac_ctl |= B43_TXH_MAC_STMSDU; if (phy->type == B43_PHYTYPE_A) mac_ctl |= B43_TXH_MAC_5GHZ; - if (info->flags & IEEE80211_TX_CTL_LONG_RETRY_LIMIT) + + /* Overwrite rates[0].count to make the retry calculation + * in the tx status easier. need the actual retry limit to + * detect whether the fallback rate was used. + */ + if ((rates[0].flags & IEEE80211_TX_RC_USE_RTS_CTS) || + (rates[0].count <= dev->wl->hw->conf.long_frame_max_tx_count)) { + rates[0].count = dev->wl->hw->conf.long_frame_max_tx_count; mac_ctl |= B43_TXH_MAC_LONGFRAME; + } else { + rates[0].count = dev->wl->hw->conf.short_frame_max_tx_count; + } /* Generate the RTS or CTS-to-self frame */ - if ((info->flags & IEEE80211_TX_CTL_USE_RTS_CTS) || - (info->flags & IEEE80211_TX_CTL_USE_CTS_PROTECT)) { + if ((rates[0].flags & IEEE80211_TX_RC_USE_RTS_CTS) || + (rates[0].flags & IEEE80211_TX_RC_USE_CTS_PROTECT)) { unsigned int len; struct ieee80211_hdr *hdr; int rts_rate, rts_rate_fb; @@ -344,7 +356,7 @@ int b43_generate_txhdr(struct b43_wldev *dev, rts_rate_fb = b43_calc_fallback_rate(rts_rate); rts_rate_fb_ofdm = b43_is_ofdm_rate(rts_rate_fb); - if (info->flags & IEEE80211_TX_CTL_USE_CTS_PROTECT) { + if (rates[0].flags & IEEE80211_TX_RC_USE_CTS_PROTECT) { struct ieee80211_cts *cts; if (b43_is_old_txhdr_format(dev)) { @@ -687,10 +699,18 @@ void b43_handle_txstatus(struct b43_wldev *dev, /* Fill out the mac80211 TXstatus report based on the b43-specific * txstatus report data. This returns a boolean whether the frame was * successfully transmitted. */ -bool b43_fill_txstatus_report(struct ieee80211_tx_info *report, +bool b43_fill_txstatus_report(struct b43_wldev *dev, + struct ieee80211_tx_info *report, const struct b43_txstatus *status) { bool frame_success = 1; + int retry_limit; + + /* preserve the confiured retry limit before clearing the status + * The xmit function has overwritten the rc's value with the actual + * retry limit done by the hardware */ + retry_limit = report->status.rates[0].count; + ieee80211_tx_info_clear_status(report); if (status->acked) { /* The frame was ACKed. */ @@ -700,14 +720,32 @@ bool b43_fill_txstatus_report(struct ieee80211_tx_info *report, if (!(report->flags & IEEE80211_TX_CTL_NO_ACK)) { /* ...but we expected an ACK. */ frame_success = 0; - report->status.excessive_retries = 1; } } if (status->frame_count == 0) { /* The frame was not transmitted at all. */ - report->status.retry_count = 0; - } else - report->status.retry_count = status->frame_count - 1; + report->status.rates[0].count = 0; + } else if (status->rts_count > dev->wl->hw->conf.short_frame_max_tx_count) { + /* + * If the short retries (RTS, not data frame) have exceeded + * the limit, the hw will not have tried the selected rate, + * but will have used the fallback rate instead. + * Don't let the rate control count attempts for the selected + * rate in this case, otherwise the statistics will be off. + */ + report->status.rates[0].count = 0; + report->status.rates[1].count = status->frame_count; + } else { + if (status->frame_count > retry_limit) { + report->status.rates[0].count = retry_limit; + report->status.rates[1].count = status->frame_count - + retry_limit; + + } else { + report->status.rates[0].count = status->frame_count; + report->status.rates[1].idx = -1; + } + } return frame_success; } diff --git a/drivers/net/wireless/b43/xmit.h b/drivers/net/wireless/b43/xmit.h index 0215faf4754..4fb2a190f7a 100644 --- a/drivers/net/wireless/b43/xmit.h +++ b/drivers/net/wireless/b43/xmit.h @@ -178,7 +178,7 @@ int b43_generate_txhdr(struct b43_wldev *dev, u8 * txhdr, const unsigned char *fragment_data, unsigned int fragment_len, - const struct ieee80211_tx_info *txctl, u16 cookie); + struct ieee80211_tx_info *txctl, u16 cookie); /* Transmit Status */ struct b43_txstatus { @@ -294,7 +294,8 @@ void b43_rx(struct b43_wldev *dev, struct sk_buff *skb, const void *_rxhdr); void b43_handle_txstatus(struct b43_wldev *dev, const struct b43_txstatus *status); -bool b43_fill_txstatus_report(struct ieee80211_tx_info *report, +bool b43_fill_txstatus_report(struct b43_wldev *dev, + struct ieee80211_tx_info *report, const struct b43_txstatus *status); void b43_tx_suspend(struct b43_wldev *dev); diff --git a/drivers/net/wireless/b43legacy/dma.c b/drivers/net/wireless/b43legacy/dma.c index fb6819e40f3..308c2647f00 100644 --- a/drivers/net/wireless/b43legacy/dma.c +++ b/drivers/net/wireless/b43legacy/dma.c @@ -1411,6 +1411,7 @@ void b43legacy_dma_handle_txstatus(struct b43legacy_wldev *dev, struct b43legacy_dmaring *ring; struct b43legacy_dmadesc_generic *desc; struct b43legacy_dmadesc_meta *meta; + int retry_limit; int slot; ring = parse_cookie(dev, status->cookie, &slot); @@ -1437,25 +1438,42 @@ void b43legacy_dma_handle_txstatus(struct b43legacy_wldev *dev, struct ieee80211_tx_info *info; BUG_ON(!meta->skb); info = IEEE80211_SKB_CB(meta->skb); - /* Call back to inform the ieee80211 subsystem about the - * status of the transmission. - * Some fields of txstat are already filled in dma_tx(). - */ - memset(&info->status, 0, sizeof(info->status)); + /* preserve the confiured retry limit before clearing the status + * The xmit function has overwritten the rc's value with the actual + * retry limit done by the hardware */ + retry_limit = info->status.rates[0].count; + ieee80211_tx_info_clear_status(info); - if (status->acked) { + if (status->acked) info->flags |= IEEE80211_TX_STAT_ACK; + + if (status->rts_count > dev->wl->hw->conf.short_frame_max_tx_count) { + /* + * If the short retries (RTS, not data frame) have exceeded + * the limit, the hw will not have tried the selected rate, + * but will have used the fallback rate instead. + * Don't let the rate control count attempts for the selected + * rate in this case, otherwise the statistics will be off. + */ + info->status.rates[0].count = 0; + info->status.rates[1].count = status->frame_count; } else { - if (!(info->flags & IEEE80211_TX_CTL_NO_ACK)) - info->status.excessive_retries = 1; + if (status->frame_count > retry_limit) { + info->status.rates[0].count = retry_limit; + info->status.rates[1].count = status->frame_count - + retry_limit; + + } else { + info->status.rates[0].count = status->frame_count; + info->status.rates[1].idx = -1; + } } - if (status->frame_count == 0) { - /* The frame was not transmitted at all. */ - info->status.retry_count = 0; - } else - info->status.retry_count = status->frame_count - - 1; + + /* Call back to inform the ieee80211 subsystem about the + * status of the transmission. + * Some fields of txstat are already filled in dma_tx(). + */ ieee80211_tx_status_irqsafe(dev->wl->hw, meta->skb); /* skb is freed by ieee80211_tx_status_irqsafe() */ meta->skb = NULL; diff --git a/drivers/net/wireless/b43legacy/main.c b/drivers/net/wireless/b43legacy/main.c index 78e46365f69..9edbdf9cb50 100644 --- a/drivers/net/wireless/b43legacy/main.c +++ b/drivers/net/wireless/b43legacy/main.c @@ -3682,7 +3682,7 @@ static int b43legacy_wireless_init(struct ssb_device *dev) BIT(NL80211_IFTYPE_WDS) | BIT(NL80211_IFTYPE_ADHOC); hw->queues = 1; /* FIXME: hardware has more queues */ - hw->max_altrates = 1; + hw->max_rates = 2; SET_IEEE80211_DEV(hw, dev->dev); if (is_valid_ether_addr(sprom->et1mac)) SET_IEEE80211_PERM_ADDR(hw, sprom->et1mac); diff --git a/drivers/net/wireless/b43legacy/pio.c b/drivers/net/wireless/b43legacy/pio.c index a86c7647fa2..746d5361bba 100644 --- a/drivers/net/wireless/b43legacy/pio.c +++ b/drivers/net/wireless/b43legacy/pio.c @@ -491,6 +491,7 @@ void b43legacy_pio_handle_txstatus(struct b43legacy_wldev *dev, struct b43legacy_pioqueue *queue; struct b43legacy_pio_txpacket *packet; struct ieee80211_tx_info *info; + int retry_limit; queue = parse_cookie(dev, status->cookie, &packet); B43legacy_WARN_ON(!queue); @@ -503,11 +504,37 @@ void b43legacy_pio_handle_txstatus(struct b43legacy_wldev *dev, sizeof(struct b43legacy_txhdr_fw3)); info = IEEE80211_SKB_CB(packet->skb); - memset(&info->status, 0, sizeof(info->status)); + + /* preserve the confiured retry limit before clearing the status + * The xmit function has overwritten the rc's value with the actual + * retry limit done by the hardware */ + retry_limit = info->status.rates[0].count; + ieee80211_tx_info_clear_status(info); if (status->acked) info->flags |= IEEE80211_TX_STAT_ACK; - info->status.retry_count = status->frame_count - 1; + + if (status->rts_count > dev->wl->hw->conf.short_frame_max_tx_count) { + /* + * If the short retries (RTS, not data frame) have exceeded + * the limit, the hw will not have tried the selected rate, + * but will have used the fallback rate instead. + * Don't let the rate control count attempts for the selected + * rate in this case, otherwise the statistics will be off. + */ + info->status.rates[0].count = 0; + info->status.rates[1].count = status->frame_count; + } else { + if (status->frame_count > retry_limit) { + info->status.rates[0].count = retry_limit; + info->status.rates[1].count = status->frame_count - + retry_limit; + + } else { + info->status.rates[0].count = status->frame_count; + info->status.rates[1].idx = -1; + } + } ieee80211_tx_status_irqsafe(dev->wl->hw, packet->skb); packet->skb = NULL; diff --git a/drivers/net/wireless/b43legacy/xmit.c b/drivers/net/wireless/b43legacy/xmit.c index 65e83378160..12fca99f757 100644 --- a/drivers/net/wireless/b43legacy/xmit.c +++ b/drivers/net/wireless/b43legacy/xmit.c @@ -188,7 +188,7 @@ static int generate_txhdr_fw3(struct b43legacy_wldev *dev, struct b43legacy_txhdr_fw3 *txhdr, const unsigned char *fragment_data, unsigned int fragment_len, - const struct ieee80211_tx_info *info, + struct ieee80211_tx_info *info, u16 cookie) { const struct ieee80211_hdr *wlhdr; @@ -201,6 +201,7 @@ static int generate_txhdr_fw3(struct b43legacy_wldev *dev, u32 mac_ctl = 0; u16 phy_ctl = 0; struct ieee80211_rate *tx_rate; + struct ieee80211_tx_rate *rates; wlhdr = (const struct ieee80211_hdr *)fragment_data; @@ -274,7 +275,7 @@ static int generate_txhdr_fw3(struct b43legacy_wldev *dev, /* PHY TX Control word */ if (rate_ofdm) phy_ctl |= B43legacy_TX4_PHY_OFDM; - if (dev->short_preamble) + if (info->control.rates[0].flags & IEEE80211_TX_RC_USE_SHORT_PREAMBLE) phy_ctl |= B43legacy_TX4_PHY_SHORTPRMBL; switch (info->antenna_sel_tx) { case 0: @@ -291,6 +292,7 @@ static int generate_txhdr_fw3(struct b43legacy_wldev *dev, } /* MAC control */ + rates = info->control.rates; if (!(info->flags & IEEE80211_TX_CTL_NO_ACK)) mac_ctl |= B43legacy_TX4_MAC_ACK; if (info->flags & IEEE80211_TX_CTL_ASSIGN_SEQ) @@ -299,12 +301,22 @@ static int generate_txhdr_fw3(struct b43legacy_wldev *dev, mac_ctl |= B43legacy_TX4_MAC_STMSDU; if (rate_fb_ofdm) mac_ctl |= B43legacy_TX4_MAC_FALLBACKOFDM; - if (info->flags & IEEE80211_TX_CTL_LONG_RETRY_LIMIT) + + /* Overwrite rates[0].count to make the retry calculation + * in the tx status easier. need the actual retry limit to + * detect whether the fallback rate was used. + */ + if ((rates[0].flags & IEEE80211_TX_RC_USE_RTS_CTS) || + (rates[0].count <= dev->wl->hw->conf.long_frame_max_tx_count)) { + rates[0].count = dev->wl->hw->conf.long_frame_max_tx_count; mac_ctl |= B43legacy_TX4_MAC_LONGFRAME; + } else { + rates[0].count = dev->wl->hw->conf.short_frame_max_tx_count; + } /* Generate the RTS or CTS-to-self frame */ - if ((info->flags & IEEE80211_TX_CTL_USE_RTS_CTS) || - (info->flags & IEEE80211_TX_CTL_USE_CTS_PROTECT)) { + if ((rates[0].flags & IEEE80211_TX_RC_USE_RTS_CTS) || + (rates[0].flags & IEEE80211_TX_RC_USE_CTS_PROTECT)) { unsigned int len; struct ieee80211_hdr *hdr; int rts_rate; @@ -319,7 +331,7 @@ static int generate_txhdr_fw3(struct b43legacy_wldev *dev, if (rts_rate_fb_ofdm) mac_ctl |= B43legacy_TX4_MAC_CTSFALLBACKOFDM; - if (info->flags & IEEE80211_TX_CTL_USE_CTS_PROTECT) { + if (rates[0].flags & IEEE80211_TX_RC_USE_CTS_PROTECT) { ieee80211_ctstoself_get(dev->wl->hw, info->control.vif, fragment_data, @@ -362,7 +374,7 @@ int b43legacy_generate_txhdr(struct b43legacy_wldev *dev, u8 *txhdr, const unsigned char *fragment_data, unsigned int fragment_len, - const struct ieee80211_tx_info *info, + struct ieee80211_tx_info *info, u16 cookie) { return generate_txhdr_fw3(dev, (struct b43legacy_txhdr_fw3 *)txhdr, diff --git a/drivers/net/wireless/b43legacy/xmit.h b/drivers/net/wireless/b43legacy/xmit.h index e56777e0fea..62e09d02788 100644 --- a/drivers/net/wireless/b43legacy/xmit.h +++ b/drivers/net/wireless/b43legacy/xmit.h @@ -80,7 +80,7 @@ int b43legacy_generate_txhdr(struct b43legacy_wldev *dev, u8 *txhdr, const unsigned char *fragment_data, unsigned int fragment_len, - const struct ieee80211_tx_info *info, + struct ieee80211_tx_info *info, u16 cookie); diff --git a/drivers/net/wireless/iwlwifi/iwl-3945-rs.c b/drivers/net/wireless/iwlwifi/iwl-3945-rs.c index c25daec4f93..f440ed0fe54 100644 --- a/drivers/net/wireless/iwlwifi/iwl-3945-rs.c +++ b/drivers/net/wireless/iwlwifi/iwl-3945-rs.c @@ -422,34 +422,6 @@ static void rs_free_sta(void *priv, struct ieee80211_sta *sta, } -/* - * get ieee prev rate from rate scale table. - * for A and B mode we need to overright prev - * value - */ -static int rs_adjust_next_rate(struct iwl3945_priv *priv, int rate) -{ - int next_rate = iwl3945_get_prev_ieee_rate(rate); - - switch (priv->band) { - case IEEE80211_BAND_5GHZ: - if (rate == IWL_RATE_12M_INDEX) - next_rate = IWL_RATE_9M_INDEX; - else if (rate == IWL_RATE_6M_INDEX) - next_rate = IWL_RATE_6M_INDEX; - break; -/* XXX cannot be invoked in current mac80211 so not a regression - case MODE_IEEE80211B: - if (rate == IWL_RATE_11M_INDEX_TABLE) - next_rate = IWL_RATE_5M_INDEX_TABLE; - break; - */ - default: - break; - } - - return next_rate; -} /** * rs_tx_status - Update rate control values based on Tx results * @@ -460,17 +432,21 @@ static void rs_tx_status(void *priv_rate, struct ieee80211_supported_band *sband struct ieee80211_sta *sta, void *priv_sta, struct sk_buff *skb) { - u8 retries, current_count; + u8 retries = 0, current_count; int scale_rate_index, first_index, last_index; unsigned long flags; struct iwl3945_priv *priv = (struct iwl3945_priv *)priv_rate; struct iwl3945_rs_sta *rs_sta = priv_sta; struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb); + int i; IWL_DEBUG_RATE("enter\n"); - retries = info->status.retry_count; - first_index = sband->bitrates[info->tx_rate_idx].hw_value; + for (i = 0; i < IEEE80211_TX_MAX_RATES; i++) + retries += info->status.rates[i].count; + retries--; + + first_index = sband->bitrates[info->status.rates[0].idx].hw_value; if ((first_index < 0) || (first_index >= IWL_RATE_COUNT)) { IWL_DEBUG_RATE("leave: Rate out of bounds: %d\n", first_index); return; @@ -502,7 +478,7 @@ static void rs_tx_status(void *priv_rate, struct ieee80211_supported_band *sband last_index = scale_rate_index; } else { current_count = priv->retry_rate; - last_index = rs_adjust_next_rate(priv, + last_index = iwl3945_rs_next_rate(priv, scale_rate_index); } @@ -518,7 +494,7 @@ static void rs_tx_status(void *priv_rate, struct ieee80211_supported_band *sband if (retries) scale_rate_index = - rs_adjust_next_rate(priv, scale_rate_index); + iwl3945_rs_next_rate(priv, scale_rate_index); } @@ -630,10 +606,11 @@ static u16 iwl3945_get_adjacent_rate(struct iwl3945_rs_sta *rs_sta, * rate table and must reference the driver allocated rate table * */ -static void rs_get_rate(void *priv_r, struct ieee80211_supported_band *sband, - struct ieee80211_sta *sta, void *priv_sta, - struct sk_buff *skb, struct rate_selection *sel) +static void rs_get_rate(void *priv_r, struct ieee80211_sta *sta, + void *priv_sta, struct ieee80211_tx_rate_control *txrc) { + struct ieee80211_supported_band *sband = txrc->sband; + struct sk_buff *skb = txrc->skb; u8 low = IWL_RATE_INVALID; u8 high = IWL_RATE_INVALID; u16 high_low; @@ -649,6 +626,7 @@ static void rs_get_rate(void *priv_r, struct ieee80211_supported_band *sband, struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)skb->data; u16 fc, rate_mask; struct iwl3945_priv *priv = (struct iwl3945_priv *)priv_r; + struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb); IWL_DEBUG_RATE("enter\n"); @@ -659,7 +637,7 @@ static void rs_get_rate(void *priv_r, struct ieee80211_supported_band *sband, is_multicast_ether_addr(hdr->addr1) || !sta || !priv_sta) { IWL_DEBUG_RATE("leave: No STA priv data to update!\n"); - sel->rate_idx = rate_lowest_index(sband, sta); + info->control.rates[0].idx = rate_lowest_index(sband, sta); return; } @@ -792,9 +770,10 @@ static void rs_get_rate(void *priv_r, struct ieee80211_supported_band *sband, rs_sta->last_txrate_idx = index; if (sband->band == IEEE80211_BAND_5GHZ) - sel->rate_idx = rs_sta->last_txrate_idx - IWL_FIRST_OFDM_RATE; + info->control.rates[0].idx = rs_sta->last_txrate_idx - + IWL_FIRST_OFDM_RATE; else - sel->rate_idx = rs_sta->last_txrate_idx; + info->control.rates[0].idx = rs_sta->last_txrate_idx; IWL_DEBUG_RATE("leave: %d\n", index); } diff --git a/drivers/net/wireless/iwlwifi/iwl-3945.c b/drivers/net/wireless/iwlwifi/iwl-3945.c index 8a00245be51..7afafb62970 100644 --- a/drivers/net/wireless/iwlwifi/iwl-3945.c +++ b/drivers/net/wireless/iwlwifi/iwl-3945.c @@ -261,6 +261,35 @@ static inline const char *iwl3945_get_tx_fail_reason(u32 status) } #endif +/* + * get ieee prev rate from rate scale table. + * for A and B mode we need to overright prev + * value + */ +int iwl3945_rs_next_rate(struct iwl3945_priv *priv, int rate) +{ + int next_rate = iwl3945_get_prev_ieee_rate(rate); + + switch (priv->band) { + case IEEE80211_BAND_5GHZ: + if (rate == IWL_RATE_12M_INDEX) + next_rate = IWL_RATE_9M_INDEX; + else if (rate == IWL_RATE_6M_INDEX) + next_rate = IWL_RATE_6M_INDEX; + break; +/* XXX cannot be invoked in current mac80211 so not a regression + case MODE_IEEE80211B: + if (rate == IWL_RATE_11M_INDEX_TABLE) + next_rate = IWL_RATE_5M_INDEX_TABLE; + break; + */ + default: + break; + } + + return next_rate; +} + /** * iwl3945_tx_queue_reclaim - Reclaim Tx queue entries already Tx'd @@ -308,6 +337,7 @@ static void iwl3945_rx_reply_tx(struct iwl3945_priv *priv, struct iwl3945_tx_resp *tx_resp = (void *)&pkt->u.raw[0]; u32 status = le32_to_cpu(tx_resp->status); int rate_idx; + int fail, i; if ((index >= txq->q.n_bd) || (iwl3945_x2_queue_used(&txq->q, index) == 0)) { IWL_ERROR("Read index for DMA queue txq_id (%d) index %d " @@ -318,9 +348,36 @@ static void iwl3945_rx_reply_tx(struct iwl3945_priv *priv, } info = IEEE80211_SKB_CB(txq->txb[txq->q.read_ptr].skb[0]); - memset(&info->status, 0, sizeof(info->status)); + ieee80211_tx_info_clear_status(info); + + /* Fill the MRR chain with some info about on-chip retransmissions */ + rate_idx = iwl3945_hwrate_to_plcp_idx(tx_resp->rate); + if (info->band == IEEE80211_BAND_5GHZ) + rate_idx -= IWL_FIRST_OFDM_RATE; + + fail = tx_resp->failure_frame; + for (i = 0; i < IEEE80211_TX_MAX_RATES; i++) { + int next = iwl3945_rs_next_rate(priv, rate_idx); + + info->status.rates[i].idx = rate_idx; + + /* + * Put remaining into the last count as best approximation + * of saying exactly what the hardware would have done... + */ + if ((rate_idx == next) || (i == IEEE80211_TX_MAX_RATES - 1)) { + info->status.rates[i].count = fail; + break; + } + + info->status.rates[i].count = priv->retry_rate; + fail -= priv->retry_rate; + rate_idx = next; + if (fail <= 0) + break; + } + info->status.rates[i].count++; /* add final attempt */ - info->status.retry_count = tx_resp->failure_frame; /* tx_status->rts_retry_count = tx_resp->failure_rts; */ info->flags |= ((status & TX_STATUS_MSK) == TX_STATUS_SUCCESS) ? IEEE80211_TX_STAT_ACK : 0; @@ -329,10 +386,6 @@ static void iwl3945_rx_reply_tx(struct iwl3945_priv *priv, txq_id, iwl3945_get_tx_fail_reason(status), status, tx_resp->rate, tx_resp->failure_frame); - rate_idx = iwl3945_hwrate_to_plcp_idx(tx_resp->rate); - if (info->band == IEEE80211_BAND_5GHZ) - rate_idx -= IWL_FIRST_OFDM_RATE; - info->tx_rate_idx = rate_idx; IWL_DEBUG_TX_REPLY("Tx queue reclaim %d\n", index); iwl3945_tx_queue_reclaim(priv, txq_id, index); diff --git a/drivers/net/wireless/iwlwifi/iwl-3945.h b/drivers/net/wireless/iwlwifi/iwl-3945.h index bdd32475b99..592c5958723 100644 --- a/drivers/net/wireless/iwlwifi/iwl-3945.h +++ b/drivers/net/wireless/iwlwifi/iwl-3945.h @@ -954,6 +954,8 @@ static inline int is_channel_ibss(const struct iwl3945_channel_info *ch) extern const struct iwl3945_channel_info *iwl3945_get_channel_info( const struct iwl3945_priv *priv, enum ieee80211_band band, u16 channel); +extern int iwl3945_rs_next_rate(struct iwl3945_priv *priv, int rate); + /* Requires full declaration of iwl3945_priv before including */ #include "iwl-3945-io.h" diff --git a/drivers/net/wireless/iwlwifi/iwl-4965.c b/drivers/net/wireless/iwlwifi/iwl-4965.c index 9838de5f436..222c2baa95c 100644 --- a/drivers/net/wireless/iwlwifi/iwl-4965.c +++ b/drivers/net/wireless/iwlwifi/iwl-4965.c @@ -619,10 +619,10 @@ static void iwl4965_gain_computation(struct iwl_priv *priv, static void iwl4965_rts_tx_cmd_flag(struct ieee80211_tx_info *info, __le32 *tx_flags) { - if (info->flags & IEEE80211_TX_CTL_USE_RTS_CTS) { + if (info->control.rates[0].flags & IEEE80211_TX_RC_USE_RTS_CTS) { *tx_flags |= TX_CMD_FLG_RTS_MSK; *tx_flags &= ~TX_CMD_FLG_CTS_MSK; - } else if (info->flags & IEEE80211_TX_CTL_USE_CTS_PROTECT) { + } else if (info->control.rates[0].flags & IEEE80211_TX_RC_USE_CTS_PROTECT) { *tx_flags &= ~TX_CMD_FLG_RTS_MSK; *tx_flags |= TX_CMD_FLG_CTS_MSK; } @@ -2070,7 +2070,7 @@ static int iwl4965_tx_status_reply_tx(struct iwl_priv *priv, agg->frame_count, agg->start_idx, idx); info = IEEE80211_SKB_CB(priv->txq[txq_id].txb[idx].skb[0]); - info->status.retry_count = tx_resp->failure_frame; + info->status.rates[0].count = tx_resp->failure_frame + 1; info->flags &= ~IEEE80211_TX_CTL_AMPDU; info->flags |= iwl_is_tx_success(status)? IEEE80211_TX_STAT_ACK : 0; @@ -2227,7 +2227,7 @@ static void iwl4965_rx_reply_tx(struct iwl_priv *priv, iwl_txq_check_empty(priv, sta_id, tid, txq_id); } } else { - info->status.retry_count = tx_resp->failure_frame; + info->status.rates[0].count = tx_resp->failure_frame + 1; info->flags |= iwl_is_tx_success(status) ? IEEE80211_TX_STAT_ACK : 0; iwl_hwrate_to_tx_control(priv, diff --git a/drivers/net/wireless/iwlwifi/iwl-5000.c b/drivers/net/wireless/iwlwifi/iwl-5000.c index 56a3f0c84a1..d5282fa6508 100644 --- a/drivers/net/wireless/iwlwifi/iwl-5000.c +++ b/drivers/net/wireless/iwlwifi/iwl-5000.c @@ -390,8 +390,8 @@ static void iwl5000_chain_noise_reset(struct iwl_priv *priv) static void iwl5000_rts_tx_cmd_flag(struct ieee80211_tx_info *info, __le32 *tx_flags) { - if ((info->flags & IEEE80211_TX_CTL_USE_RTS_CTS) || - (info->flags & IEEE80211_TX_CTL_USE_CTS_PROTECT)) + if ((info->control.rates[0].flags & IEEE80211_TX_RC_USE_RTS_CTS) || + (info->control.rates[0].flags & IEEE80211_TX_RC_USE_CTS_PROTECT)) *tx_flags |= TX_CMD_FLG_RTS_CTS_MSK; else *tx_flags &= ~TX_CMD_FLG_RTS_CTS_MSK; @@ -1154,7 +1154,7 @@ static int iwl5000_tx_status_reply_tx(struct iwl_priv *priv, agg->frame_count, agg->start_idx, idx); info = IEEE80211_SKB_CB(priv->txq[txq_id].txb[idx].skb[0]); - info->status.retry_count = tx_resp->failure_frame; + info->status.rates[0].count = tx_resp->failure_frame + 1; info->flags &= ~IEEE80211_TX_CTL_AMPDU; info->flags |= iwl_is_tx_success(status)? IEEE80211_TX_STAT_ACK : 0; @@ -1307,7 +1307,7 @@ static void iwl5000_rx_reply_tx(struct iwl_priv *priv, iwl_txq_check_empty(priv, sta_id, tid, txq_id); } } else { - info->status.retry_count = tx_resp->failure_frame; + info->status.rates[0].count = tx_resp->failure_frame + 1; info->flags = iwl_is_tx_success(status) ? IEEE80211_TX_STAT_ACK : 0; iwl_hwrate_to_tx_control(priv, diff --git a/drivers/net/wireless/iwlwifi/iwl-agn-rs.c b/drivers/net/wireless/iwlwifi/iwl-agn-rs.c index e10e0ca09ce..f685e5d6c28 100644 --- a/drivers/net/wireless/iwlwifi/iwl-agn-rs.c +++ b/drivers/net/wireless/iwlwifi/iwl-agn-rs.c @@ -798,7 +798,7 @@ static void rs_tx_status(void *priv_r, struct ieee80211_supported_band *sband, !(info->flags & IEEE80211_TX_STAT_AMPDU)) return; - retries = info->status.retry_count; + retries = info->status.rates[0].count - 1; if (retries > 15) retries = 15; @@ -830,20 +830,15 @@ static void rs_tx_status(void *priv_r, struct ieee80211_supported_band *sband, if (priv->band == IEEE80211_BAND_5GHZ) rs_index -= IWL_FIRST_OFDM_RATE; - if ((info->tx_rate_idx < 0) || - (tbl_type.is_SGI ^ - !!(info->flags & IEEE80211_TX_CTL_SHORT_GI)) || - (tbl_type.is_fat ^ - !!(info->flags & IEEE80211_TX_CTL_40_MHZ_WIDTH)) || - (tbl_type.is_dup ^ - !!(info->flags & IEEE80211_TX_CTL_DUP_DATA)) || - (tbl_type.ant_type ^ info->antenna_sel_tx) || - (!!(tx_rate & RATE_MCS_HT_MSK) ^ - !!(info->flags & IEEE80211_TX_CTL_OFDM_HT)) || - (!!(tx_rate & RATE_MCS_GF_MSK) ^ - !!(info->flags & IEEE80211_TX_CTL_GREEN_FIELD)) || + if ((info->status.rates[0].idx < 0) || + (tbl_type.is_SGI != !!(info->status.rates[0].flags & IEEE80211_TX_RC_SHORT_GI)) || + (tbl_type.is_fat != !!(info->status.rates[0].flags & IEEE80211_TX_RC_40_MHZ_WIDTH)) || + (tbl_type.is_dup != !!(info->status.rates[0].flags & IEEE80211_TX_RC_DUP_DATA)) || + (tbl_type.ant_type != info->antenna_sel_tx) || + (!!(tx_rate & RATE_MCS_HT_MSK) != !!(info->status.rates[0].flags & IEEE80211_TX_RC_MCS)) || + (!!(tx_rate & RATE_MCS_GF_MSK) != !!(info->status.rates[0].flags & IEEE80211_TX_RC_GREEN_FIELD)) || (hw->wiphy->bands[priv->band]->bitrates[rs_index].bitrate != - hw->wiphy->bands[info->band]->bitrates[info->tx_rate_idx].bitrate)) { + hw->wiphy->bands[info->band]->bitrates[info->status.rates[0].idx].bitrate)) { IWL_DEBUG_RATE("initial rate does not match 0x%x\n", tx_rate); goto out; } @@ -2098,15 +2093,17 @@ static void rs_initialize_lq(struct iwl_priv *priv, return; } -static void rs_get_rate(void *priv_r, struct ieee80211_supported_band *sband, - struct ieee80211_sta *sta, void *priv_sta, - struct sk_buff *skb, struct rate_selection *sel) +static void rs_get_rate(void *priv_r, struct ieee80211_sta *sta, void *priv_sta, + struct ieee80211_tx_rate_control *txrc) { int i; + struct sk_buff *skb = txrc->skb; + struct ieee80211_supported_band *sband = txrc->sband; struct iwl_priv *priv = (struct iwl_priv *)priv_r; struct ieee80211_conf *conf = &priv->hw->conf; struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)skb->data; + struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb); __le16 fc; struct iwl_lq_sta *lq_sta; @@ -2117,7 +2114,7 @@ static void rs_get_rate(void *priv_r, struct ieee80211_supported_band *sband, fc = hdr->frame_control; if (!ieee80211_is_data(fc) || is_multicast_ether_addr(hdr->addr1) || !sta || !priv_sta) { - sel->rate_idx = rate_lowest_index(sband, sta); + info->control.rates[0].idx = rate_lowest_index(sband, sta); return; } @@ -2143,13 +2140,13 @@ static void rs_get_rate(void *priv_r, struct ieee80211_supported_band *sband, } if ((i < 0) || (i > IWL_RATE_COUNT)) { - sel->rate_idx = rate_lowest_index(sband, sta); + info->control.rates[0].idx = rate_lowest_index(sband, sta); return; } if (sband->band == IEEE80211_BAND_5GHZ) i -= IWL_FIRST_OFDM_RATE; - sel->rate_idx = i; + info->control.rates[0].idx = i; } static void *rs_alloc_sta(void *priv_rate, struct ieee80211_sta *sta, diff --git a/drivers/net/wireless/iwlwifi/iwl-core.c b/drivers/net/wireless/iwlwifi/iwl-core.c index 10f5a0a233f..2c4162e4814 100644 --- a/drivers/net/wireless/iwlwifi/iwl-core.c +++ b/drivers/net/wireless/iwlwifi/iwl-core.c @@ -88,26 +88,27 @@ EXPORT_SYMBOL(iwl_rates); * translate ucode response to mac80211 tx status control values */ void iwl_hwrate_to_tx_control(struct iwl_priv *priv, u32 rate_n_flags, - struct ieee80211_tx_info *control) + struct ieee80211_tx_info *info) { int rate_index; + struct ieee80211_tx_rate *r = &info->control.rates[0]; - control->antenna_sel_tx = + info->antenna_sel_tx = ((rate_n_flags & RATE_MCS_ANT_ABC_MSK) >> RATE_MCS_ANT_POS); if (rate_n_flags & RATE_MCS_HT_MSK) - control->flags |= IEEE80211_TX_CTL_OFDM_HT; + r->flags |= IEEE80211_TX_RC_MCS; if (rate_n_flags & RATE_MCS_GF_MSK) - control->flags |= IEEE80211_TX_CTL_GREEN_FIELD; + r->flags |= IEEE80211_TX_RC_GREEN_FIELD; if (rate_n_flags & RATE_MCS_FAT_MSK) - control->flags |= IEEE80211_TX_CTL_40_MHZ_WIDTH; + r->flags |= IEEE80211_TX_RC_40_MHZ_WIDTH; if (rate_n_flags & RATE_MCS_DUP_MSK) - control->flags |= IEEE80211_TX_CTL_DUP_DATA; + r->flags |= IEEE80211_TX_RC_DUP_DATA; if (rate_n_flags & RATE_MCS_SGI_MSK) - control->flags |= IEEE80211_TX_CTL_SHORT_GI; + r->flags |= IEEE80211_TX_RC_SHORT_GI; rate_index = iwl_hwrate_to_plcp_idx(rate_n_flags); - if (control->band == IEEE80211_BAND_5GHZ) + if (info->band == IEEE80211_BAND_5GHZ) rate_index -= IWL_FIRST_OFDM_RATE; - control->tx_rate_idx = rate_index; + r->idx = rate_index; } EXPORT_SYMBOL(iwl_hwrate_to_tx_control); diff --git a/drivers/net/wireless/iwlwifi/iwl3945-base.c b/drivers/net/wireless/iwlwifi/iwl3945-base.c index b1464c71ea0..2cd33b4e9e1 100644 --- a/drivers/net/wireless/iwlwifi/iwl3945-base.c +++ b/drivers/net/wireless/iwlwifi/iwl3945-base.c @@ -2395,6 +2395,7 @@ static void iwl3945_build_tx_cmd_basic(struct iwl3945_priv *priv, { __le16 fc = hdr->frame_control; __le32 tx_flags = cmd->cmd.tx.tx_flags; + u8 rc_flags = info->control.rates[0].flags; cmd->cmd.tx.stop_time.life_time = TX_CMD_LIFE_TIME_INFINITE; if (!(info->flags & IEEE80211_TX_CTL_NO_ACK)) { @@ -2421,10 +2422,10 @@ static void iwl3945_build_tx_cmd_basic(struct iwl3945_priv *priv, tx_flags |= TX_CMD_FLG_SEQ_CTL_MSK; } - if (info->flags & IEEE80211_TX_CTL_USE_RTS_CTS) { + if (rc_flags & IEEE80211_TX_RC_USE_RTS_CTS) { tx_flags |= TX_CMD_FLG_RTS_MSK; tx_flags &= ~TX_CMD_FLG_CTS_MSK; - } else if (info->flags & IEEE80211_TX_CTL_USE_CTS_PROTECT) { + } else if (rc_flags & IEEE80211_TX_RC_USE_CTS_PROTECT) { tx_flags &= ~TX_CMD_FLG_RTS_MSK; tx_flags |= TX_CMD_FLG_CTS_MSK; } diff --git a/drivers/net/wireless/libertas_tf/main.c b/drivers/net/wireless/libertas_tf/main.c index 241ddcfa352..d1fc305de5f 100644 --- a/drivers/net/wireless/libertas_tf/main.c +++ b/drivers/net/wireless/libertas_tf/main.c @@ -592,14 +592,14 @@ EXPORT_SYMBOL_GPL(lbtf_remove_card); void lbtf_send_tx_feedback(struct lbtf_private *priv, u8 retrycnt, u8 fail) { struct ieee80211_tx_info *info = IEEE80211_SKB_CB(priv->tx_skb); - memset(&info->status, 0, sizeof(info->status)); + + ieee80211_tx_info_clear_status(info); /* * Commented out, otherwise we never go beyond 1Mbit/s using mac80211 * default pid rc algorithm. * * info->status.retry_count = MRVL_DEFAULT_RETRIES - retrycnt; */ - info->status.excessive_retries = fail ? 1 : 0; if (!(info->flags & IEEE80211_TX_CTL_NO_ACK) && !fail) info->flags |= IEEE80211_TX_STAT_ACK; skb_pull(priv->tx_skb, sizeof(struct txpd)); diff --git a/drivers/net/wireless/mac80211_hwsim.c b/drivers/net/wireless/mac80211_hwsim.c index e2aeef8de70..c5765232528 100644 --- a/drivers/net/wireless/mac80211_hwsim.c +++ b/drivers/net/wireless/mac80211_hwsim.c @@ -209,7 +209,7 @@ static bool mac80211_hwsim_tx_frame(struct ieee80211_hw *hw, /* TODO: set mactime */ rx_status.freq = data->channel->center_freq; rx_status.band = data->channel->band; - rx_status.rate_idx = info->tx_rate_idx; + rx_status.rate_idx = info->control.rates[0].idx; /* TODO: simulate signal strength (and optional packet drop) */ /* Copy skb to all enabled radios that are on the current frequency */ @@ -269,13 +269,9 @@ static int mac80211_hwsim_tx(struct ieee80211_hw *hw, struct sk_buff *skb) if (txi->control.sta) hwsim_check_sta_magic(txi->control.sta); - memset(&txi->status, 0, sizeof(txi->status)); - if (!(txi->flags & IEEE80211_TX_CTL_NO_ACK)) { - if (ack) - txi->flags |= IEEE80211_TX_STAT_ACK; - else - txi->status.excessive_retries = 1; - } + ieee80211_tx_info_clear_status(txi); + if (!(txi->flags & IEEE80211_TX_CTL_NO_ACK) && ack) + txi->flags |= IEEE80211_TX_STAT_ACK; ieee80211_tx_status_irqsafe(hw, skb); return NETDEV_TX_OK; } diff --git a/drivers/net/wireless/p54/p54common.c b/drivers/net/wireless/p54/p54common.c index 81a9756254f..65be5eca234 100644 --- a/drivers/net/wireless/p54/p54common.c +++ b/drivers/net/wireless/p54/p54common.c @@ -548,7 +548,7 @@ static void p54_rx_frame_sent(struct ieee80211_hw *dev, struct sk_buff *skb) spin_lock_irqsave(&priv->tx_queue.lock, flags); while (entry != (struct sk_buff *)&priv->tx_queue) { struct ieee80211_tx_info *info = IEEE80211_SKB_CB(entry); - range = (void *)info->driver_data; + range = (void *)info->rate_driver_data; if (range->start_addr == addr) { struct p54_control_hdr *entry_hdr; struct p54_tx_control_allocdata *entry_data; @@ -559,7 +559,7 @@ static void p54_rx_frame_sent(struct ieee80211_hw *dev, struct sk_buff *skb) struct memrecord *mr; ni = IEEE80211_SKB_CB(entry->next); - mr = (struct memrecord *)ni->driver_data; + mr = (struct memrecord *)ni->rate_driver_data; freed = mr->start_addr - last_addr; } else freed = priv->rx_end - last_addr; @@ -568,7 +568,7 @@ static void p54_rx_frame_sent(struct ieee80211_hw *dev, struct sk_buff *skb) __skb_unlink(entry, &priv->tx_queue); spin_unlock_irqrestore(&priv->tx_queue.lock, flags); - memset(&info->status, 0, sizeof(info->status)); + ieee80211_tx_info_clear_status(info); entry_hdr = (struct p54_control_hdr *) entry->data; entry_data = (struct p54_tx_control_allocdata *) entry_hdr->data; if ((entry_hdr->magic1 & cpu_to_le16(0x4000)) != 0) @@ -578,10 +578,8 @@ static void p54_rx_frame_sent(struct ieee80211_hw *dev, struct sk_buff *skb) if (!(info->flags & IEEE80211_TX_CTL_NO_ACK)) { if (!(payload->status & 0x01)) info->flags |= IEEE80211_TX_STAT_ACK; - else - info->status.excessive_retries = 1; } - info->status.retry_count = payload->retries - 1; + info->status.rates[0].count = payload->retries; info->status.ack_signal = p54_rssi_to_dbm(dev, le16_to_cpu(payload->ack_rssi)); skb_pull(entry, sizeof(*hdr) + pad + sizeof(*entry_data)); @@ -699,7 +697,7 @@ static void p54_assign_address(struct ieee80211_hw *dev, struct sk_buff *skb, while (left--) { u32 hole_size; struct ieee80211_tx_info *info = IEEE80211_SKB_CB(entry); - struct memrecord *range = (void *)info->driver_data; + struct memrecord *range = (void *)info->rate_driver_data; hole_size = range->start_addr - last_addr; if (!target_skb && hole_size >= len) { target_skb = entry->prev; @@ -715,7 +713,7 @@ static void p54_assign_address(struct ieee80211_hw *dev, struct sk_buff *skb, largest_hole = max(largest_hole, priv->rx_end - last_addr - len); if (!skb_queue_empty(&priv->tx_queue)) { struct ieee80211_tx_info *info = IEEE80211_SKB_CB(target_skb); - struct memrecord *range = (void *)info->driver_data; + struct memrecord *range = (void *)info->rate_driver_data; target_addr = range->end_addr; } } else @@ -723,7 +721,7 @@ static void p54_assign_address(struct ieee80211_hw *dev, struct sk_buff *skb, if (skb) { struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb); - struct memrecord *range = (void *)info->driver_data; + struct memrecord *range = (void *)info->rate_driver_data; range->start_addr = target_addr; range->end_addr = target_addr + len; __skb_queue_after(&priv->tx_queue, target_skb, skb); @@ -806,6 +804,7 @@ static int p54_tx(struct ieee80211_hw *dev, struct sk_buff *skb) size_t padding, len; u8 rate; u8 cts_rate = 0x20; + u8 rc_flags; current_queue = &priv->tx_stats[skb_get_queue_mapping(skb) + 4]; if (unlikely(current_queue->len > current_queue->limit)) @@ -828,18 +827,19 @@ static int p54_tx(struct ieee80211_hw *dev, struct sk_buff *skb) hdr->magic1 = cpu_to_le16(0x0010); hdr->len = cpu_to_le16(len); hdr->type = (info->flags & IEEE80211_TX_CTL_NO_ACK) ? 0 : cpu_to_le16(1); - hdr->retry1 = hdr->retry2 = info->control.retry_limit; + hdr->retry1 = hdr->retry2 = info->control.rates[0].count; /* TODO: add support for alternate retry TX rates */ rate = ieee80211_get_tx_rate(dev, info)->hw_value; - if (info->flags & IEEE80211_TX_CTL_SHORT_PREAMBLE) { + rc_flags = info->control.rates[0].flags; + if (rc_flags & IEEE80211_TX_RC_USE_SHORT_PREAMBLE) { rate |= 0x10; cts_rate |= 0x10; } - if (info->flags & IEEE80211_TX_CTL_USE_RTS_CTS) { + if (rc_flags & IEEE80211_TX_RC_USE_RTS_CTS) { rate |= 0x40; cts_rate |= ieee80211_get_rts_cts_rate(dev, info)->hw_value; - } else if (info->flags & IEEE80211_TX_CTL_USE_CTS_PROTECT) { + } else if (rc_flags & IEEE80211_TX_RC_USE_CTS_PROTECT) { rate |= 0x20; cts_rate |= ieee80211_get_rts_cts_rate(dev, info)->hw_value; } diff --git a/drivers/net/wireless/rt2x00/rt2x00dev.c b/drivers/net/wireless/rt2x00/rt2x00dev.c index 697806cf94e..e1feab8b6b0 100644 --- a/drivers/net/wireless/rt2x00/rt2x00dev.c +++ b/drivers/net/wireless/rt2x00/rt2x00dev.c @@ -498,7 +498,9 @@ void rt2x00lib_txdone(struct queue_entry *entry, { struct rt2x00_dev *rt2x00dev = entry->queue->rt2x00dev; struct ieee80211_tx_info *tx_info = IEEE80211_SKB_CB(entry->skb); + struct skb_frame_desc *skbdesc = get_skb_frame_desc(entry->skb); enum data_queue_qid qid = skb_get_queue_mapping(entry->skb); + u8 rate_idx, rate_flags; /* * Unmap the skb. @@ -528,14 +530,18 @@ void rt2x00lib_txdone(struct queue_entry *entry, rt2x00dev->link.qual.tx_failed += test_bit(TXDONE_FAILURE, &txdesc->flags); + rate_idx = skbdesc->tx_rate_idx; + rate_flags = skbdesc->tx_rate_flags; + /* * Initialize TX status */ memset(&tx_info->status, 0, sizeof(tx_info->status)); tx_info->status.ack_signal = 0; - tx_info->status.excessive_retries = - test_bit(TXDONE_EXCESSIVE_RETRY, &txdesc->flags); - tx_info->status.retry_count = txdesc->retry; + tx_info->status.rates[0].idx = rate_idx; + tx_info->status.rates[0].flags = rate_flags; + tx_info->status.rates[0].count = txdesc->retry + 1; + tx_info->status.rates[1].idx = -1; /* terminate */ if (!(tx_info->flags & IEEE80211_TX_CTL_NO_ACK)) { if (test_bit(TXDONE_SUCCESS, &txdesc->flags)) @@ -544,7 +550,7 @@ void rt2x00lib_txdone(struct queue_entry *entry, rt2x00dev->low_level_stats.dot11ACKFailureCount++; } - if (tx_info->flags & IEEE80211_TX_CTL_USE_RTS_CTS) { + if (rate_flags & IEEE80211_TX_RC_USE_RTS_CTS) { if (test_bit(TXDONE_SUCCESS, &txdesc->flags)) rt2x00dev->low_level_stats.dot11RTSSuccessCount++; else if (test_bit(TXDONE_FAILURE, &txdesc->flags)) diff --git a/drivers/net/wireless/rt2x00/rt2x00mac.c b/drivers/net/wireless/rt2x00/rt2x00mac.c index 931183369f0..b32d59eafaa 100644 --- a/drivers/net/wireless/rt2x00/rt2x00mac.c +++ b/drivers/net/wireless/rt2x00/rt2x00mac.c @@ -39,7 +39,7 @@ static int rt2x00mac_tx_rts_cts(struct rt2x00_dev *rt2x00dev, unsigned int data_length; int retval = 0; - if (tx_info->flags & IEEE80211_TX_CTL_USE_CTS_PROTECT) + if (tx_info->control.rates[0].flags & IEEE80211_TX_RC_USE_CTS_PROTECT) data_length = sizeof(struct ieee80211_cts); else data_length = sizeof(struct ieee80211_rts); @@ -64,11 +64,11 @@ static int rt2x00mac_tx_rts_cts(struct rt2x00_dev *rt2x00dev, */ memcpy(skb->cb, frag_skb->cb, sizeof(skb->cb)); rts_info = IEEE80211_SKB_CB(skb); - rts_info->flags &= ~IEEE80211_TX_CTL_USE_RTS_CTS; - rts_info->flags &= ~IEEE80211_TX_CTL_USE_CTS_PROTECT; + rts_info->control.rates[0].flags &= ~IEEE80211_TX_RC_USE_RTS_CTS; + rts_info->control.rates[0].flags &= ~IEEE80211_TX_RC_USE_CTS_PROTECT; rts_info->flags &= ~IEEE80211_TX_CTL_REQ_TX_STATUS; - if (tx_info->flags & IEEE80211_TX_CTL_USE_CTS_PROTECT) + if (tx_info->control.rates[0].flags & IEEE80211_TX_RC_USE_CTS_PROTECT) rts_info->flags |= IEEE80211_TX_CTL_NO_ACK; else rts_info->flags &= ~IEEE80211_TX_CTL_NO_ACK; @@ -84,7 +84,7 @@ static int rt2x00mac_tx_rts_cts(struct rt2x00_dev *rt2x00dev, data_length += rt2x00crypto_tx_overhead(tx_info); #endif /* CONFIG_RT2X00_LIB_CRYPTO */ - if (tx_info->flags & IEEE80211_TX_CTL_USE_CTS_PROTECT) + if (tx_info->control.rates[0].flags & IEEE80211_TX_RC_USE_CTS_PROTECT) ieee80211_ctstoself_get(rt2x00dev->hw, tx_info->control.vif, frag_skb->data, data_length, tx_info, (struct ieee80211_cts *)(skb->data)); @@ -146,8 +146,8 @@ int rt2x00mac_tx(struct ieee80211_hw *hw, struct sk_buff *skb) * inside the hardware. */ frame_control = le16_to_cpu(ieee80211hdr->frame_control); - if ((tx_info->flags & (IEEE80211_TX_CTL_USE_RTS_CTS | - IEEE80211_TX_CTL_USE_CTS_PROTECT)) && + if ((tx_info->control.rates[0].flags & (IEEE80211_TX_RC_USE_RTS_CTS | + IEEE80211_TX_RC_USE_CTS_PROTECT)) && !rt2x00dev->ops->hw->set_rts_threshold) { if (rt2x00queue_available(queue) <= 1) goto exit_fail; diff --git a/drivers/net/wireless/rt2x00/rt2x00queue.c b/drivers/net/wireless/rt2x00/rt2x00queue.c index 451d410ecda..070786ebd07 100644 --- a/drivers/net/wireless/rt2x00/rt2x00queue.c +++ b/drivers/net/wireless/rt2x00/rt2x00queue.c @@ -230,8 +230,15 @@ static void rt2x00queue_create_tx_descriptor(struct queue_entry *entry, /* * Determine retry information. */ - txdesc->retry_limit = tx_info->control.retry_limit; - if (tx_info->flags & IEEE80211_TX_CTL_LONG_RETRY_LIMIT) + txdesc->retry_limit = tx_info->control.rates[0].count - 1; + /* + * XXX: If at this point we knew whether the HW is going to use + * the RETRY_MODE bit or the retry_limit (currently all + * use the RETRY_MODE bit) we could do something like b43 + * does, set the RETRY_MODE bit when the RC algorithm is + * requesting more than the long retry limit. + */ + if (tx_info->control.rates[0].flags & IEEE80211_TX_RC_USE_RTS_CTS) __set_bit(ENTRY_TXD_RETRY_MODE, &txdesc->flags); /* @@ -371,10 +378,12 @@ static void rt2x00queue_write_tx_descriptor(struct queue_entry *entry, int rt2x00queue_write_tx_frame(struct data_queue *queue, struct sk_buff *skb) { + struct ieee80211_tx_info *tx_info; struct queue_entry *entry = rt2x00queue_get_entry(queue, Q_INDEX); struct txentry_desc txdesc; struct skb_frame_desc *skbdesc; unsigned int iv_len = 0; + u8 rate_idx, rate_flags; if (unlikely(rt2x00queue_full(queue))) return -EINVAL; @@ -399,13 +408,18 @@ int rt2x00queue_write_tx_frame(struct data_queue *queue, struct sk_buff *skb) iv_len = IEEE80211_SKB_CB(skb)->control.hw_key->iv_len; /* - * All information is retreived from the skb->cb array, + * All information is retrieved from the skb->cb array, * now we should claim ownership of the driver part of that - * array. + * array, preserving the bitrate index and flags. */ + tx_info = IEEE80211_SKB_CB(skb); + rate_idx = tx_info->control.rates[0].idx; + rate_flags = tx_info->control.rates[0].flags; skbdesc = get_skb_frame_desc(entry->skb); memset(skbdesc, 0, sizeof(*skbdesc)); skbdesc->entry = entry; + skbdesc->tx_rate_idx = rate_idx; + skbdesc->tx_rate_flags = rate_flags; /* * When hardware encryption is supported, and this frame diff --git a/drivers/net/wireless/rt2x00/rt2x00queue.h b/drivers/net/wireless/rt2x00/rt2x00queue.h index 9dbf04f0f04..4d3c7246f9a 100644 --- a/drivers/net/wireless/rt2x00/rt2x00queue.h +++ b/drivers/net/wireless/rt2x00/rt2x00queue.h @@ -104,6 +104,8 @@ enum skb_frame_desc_flags { * * @flags: Frame flags, see &enum skb_frame_desc_flags. * @desc_len: Length of the frame descriptor. + * @tx_rate_idx: the index of the TX rate, used for TX status reporting + * @tx_rate_flags: the TX rate flags, used for TX status reporting * @desc: Pointer to descriptor part of the frame. * Note that this pointer could point to something outside * of the scope of the skb->data pointer. @@ -113,9 +115,12 @@ enum skb_frame_desc_flags { * @entry: The entry to which this sk buffer belongs. */ struct skb_frame_desc { - unsigned int flags; + u8 flags; + + u8 desc_len; + u8 tx_rate_idx; + u8 tx_rate_flags; - unsigned int desc_len; void *desc; __le32 iv; diff --git a/drivers/net/wireless/rtl8180_dev.c b/drivers/net/wireless/rtl8180_dev.c index e8d22393797..6c226c024dd 100644 --- a/drivers/net/wireless/rtl8180_dev.c +++ b/drivers/net/wireless/rtl8180_dev.c @@ -182,15 +182,13 @@ static void rtl8180_handle_tx(struct ieee80211_hw *dev, unsigned int prio) skb->len, PCI_DMA_TODEVICE); info = IEEE80211_SKB_CB(skb); - memset(&info->status, 0, sizeof(info->status)); + ieee80211_tx_info_clear_status(info); - if (!(info->flags & IEEE80211_TX_CTL_NO_ACK)) { - if (flags & RTL818X_TX_DESC_FLAG_TX_OK) - info->flags |= IEEE80211_TX_STAT_ACK; - else - info->status.excessive_retries = 1; - } - info->status.retry_count = flags & 0xFF; + if (!(info->flags & IEEE80211_TX_CTL_NO_ACK) && + (flags & RTL818X_TX_DESC_FLAG_TX_OK)) + info->flags |= IEEE80211_TX_STAT_ACK; + + info->status.rates[0].count = (flags & 0xFF) + 1; ieee80211_tx_status_irqsafe(dev, skb); if (ring->entries - skb_queue_len(&ring->queue) == 2) @@ -243,6 +241,7 @@ static int rtl8180_tx(struct ieee80211_hw *dev, struct sk_buff *skb) unsigned int idx, prio; dma_addr_t mapping; u32 tx_flags; + u8 rc_flags; u16 plcp_len = 0; __le16 rts_duration = 0; @@ -261,15 +260,16 @@ static int rtl8180_tx(struct ieee80211_hw *dev, struct sk_buff *skb) tx_flags |= RTL818X_TX_DESC_FLAG_DMA | RTL818X_TX_DESC_FLAG_NO_ENC; - if (info->flags & IEEE80211_TX_CTL_USE_RTS_CTS) { + rc_flags = info->control.rates[0].flags; + if (rc_flags & IEEE80211_TX_RC_USE_RTS_CTS) { tx_flags |= RTL818X_TX_DESC_FLAG_RTS; tx_flags |= ieee80211_get_rts_cts_rate(dev, info)->hw_value << 19; - } else if (info->flags & IEEE80211_TX_CTL_USE_CTS_PROTECT) { + } else if (rc_flags & IEEE80211_TX_RC_USE_CTS_PROTECT) { tx_flags |= RTL818X_TX_DESC_FLAG_CTS; tx_flags |= ieee80211_get_rts_cts_rate(dev, info)->hw_value << 19; } - if (info->flags & IEEE80211_TX_CTL_USE_RTS_CTS) + if (rc_flags & IEEE80211_TX_RC_USE_RTS_CTS) rts_duration = ieee80211_rts_duration(dev, priv->vif, skb->len, info); @@ -292,9 +292,9 @@ static int rtl8180_tx(struct ieee80211_hw *dev, struct sk_buff *skb) entry->plcp_len = cpu_to_le16(plcp_len); entry->tx_buf = cpu_to_le32(mapping); entry->frame_len = cpu_to_le32(skb->len); - entry->flags2 = info->control.retries[0].rate_idx >= 0 ? + entry->flags2 = info->control.rates[1].idx >= 0 ? ieee80211_get_alt_retry_rate(dev, info, 0)->bitrate << 4 : 0; - entry->retry_limit = info->control.retry_limit; + entry->retry_limit = info->control.rates[0].count; entry->flags = cpu_to_le32(tx_flags); __skb_queue_tail(&ring->queue, skb); if (ring->entries - skb_queue_len(&ring->queue) < 2) @@ -855,7 +855,7 @@ static int __devinit rtl8180_probe(struct pci_dev *pdev, priv = dev->priv; priv->pdev = pdev; - dev->max_altrates = 1; + dev->max_rates = 2; SET_IEEE80211_DEV(dev, &pdev->dev); pci_set_drvdata(pdev, dev); diff --git a/drivers/net/wireless/rtl8187_dev.c b/drivers/net/wireless/rtl8187_dev.c index cd839bcb6d7..6260ed8ce12 100644 --- a/drivers/net/wireless/rtl8187_dev.c +++ b/drivers/net/wireless/rtl8187_dev.c @@ -160,13 +160,13 @@ static void rtl8187_tx_cb(struct urb *urb) { struct sk_buff *skb = (struct sk_buff *)urb->context; struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb); - struct ieee80211_hw *hw = info->driver_data[0]; + struct ieee80211_hw *hw = info->rate_driver_data[0]; struct rtl8187_priv *priv = hw->priv; - usb_free_urb(info->driver_data[1]); + usb_free_urb(info->rate_driver_data[1]); skb_pull(skb, priv->is_rtl8187b ? sizeof(struct rtl8187b_tx_hdr) : sizeof(struct rtl8187_tx_hdr)); - memset(&info->status, 0, sizeof(info->status)); + ieee80211_tx_info_clear_status(info); info->flags |= IEEE80211_TX_STAT_ACK; ieee80211_tx_status_irqsafe(hw, skb); } @@ -194,12 +194,12 @@ static int rtl8187_tx(struct ieee80211_hw *dev, struct sk_buff *skb) flags |= ieee80211_get_tx_rate(dev, info)->hw_value << 24; if (ieee80211_has_morefrags(((struct ieee80211_hdr *)skb->data)->frame_control)) flags |= RTL818X_TX_DESC_FLAG_MOREFRAG; - if (info->flags & IEEE80211_TX_CTL_USE_RTS_CTS) { + if (info->control.rates[0].flags & IEEE80211_TX_RC_USE_RTS_CTS) { flags |= RTL818X_TX_DESC_FLAG_RTS; flags |= ieee80211_get_rts_cts_rate(dev, info)->hw_value << 19; rts_dur = ieee80211_rts_duration(dev, priv->vif, skb->len, info); - } else if (info->flags & IEEE80211_TX_CTL_USE_CTS_PROTECT) { + } else if (info->control.rates[0].flags & IEEE80211_TX_RC_USE_CTS_PROTECT) { flags |= RTL818X_TX_DESC_FLAG_CTS; flags |= ieee80211_get_rts_cts_rate(dev, info)->hw_value << 19; } @@ -210,7 +210,7 @@ static int rtl8187_tx(struct ieee80211_hw *dev, struct sk_buff *skb) hdr->flags = cpu_to_le32(flags); hdr->len = 0; hdr->rts_duration = rts_dur; - hdr->retry = cpu_to_le32(info->control.retry_limit << 8); + hdr->retry = cpu_to_le32((info->control.rates[0].count - 1) << 8); buf = hdr; ep = 2; @@ -228,7 +228,7 @@ static int rtl8187_tx(struct ieee80211_hw *dev, struct sk_buff *skb) memset(hdr, 0, sizeof(*hdr)); hdr->flags = cpu_to_le32(flags); hdr->rts_duration = rts_dur; - hdr->retry = cpu_to_le32(info->control.retry_limit << 8); + hdr->retry = cpu_to_le32((info->control.rates[0].count - 1) << 8); hdr->tx_duration = ieee80211_generic_frame_duration(dev, priv->vif, skb->len, txrate); @@ -240,8 +240,8 @@ static int rtl8187_tx(struct ieee80211_hw *dev, struct sk_buff *skb) ep = epmap[skb_get_queue_mapping(skb)]; } - info->driver_data[0] = dev; - info->driver_data[1] = urb; + info->rate_driver_data[0] = dev; + info->rate_driver_data[1] = urb; usb_fill_bulk_urb(urb, priv->udev, usb_sndbulkpipe(priv->udev, ep), buf, skb->len, rtl8187_tx_cb, skb); diff --git a/drivers/net/wireless/zd1211rw/zd_mac.c b/drivers/net/wireless/zd1211rw/zd_mac.c index 6c3e21887fc..2f0802b29c4 100644 --- a/drivers/net/wireless/zd1211rw/zd_mac.c +++ b/drivers/net/wireless/zd1211rw/zd_mac.c @@ -296,15 +296,14 @@ static void zd_op_stop(struct ieee80211_hw *hw) * If no status information has been requested, the skb is freed. */ static void tx_status(struct ieee80211_hw *hw, struct sk_buff *skb, - u32 flags, int ackssi, bool success) + int ackssi, bool success) { struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb); - memset(&info->status, 0, sizeof(info->status)); + ieee80211_tx_info_clear_status(info); - if (!success) - info->status.excessive_retries = 1; - info->flags |= flags; + if (success) + info->flags |= IEEE80211_TX_STAT_ACK; info->status.ack_signal = ackssi; ieee80211_tx_status_irqsafe(hw, skb); } @@ -326,7 +325,7 @@ void zd_mac_tx_failed(struct ieee80211_hw *hw) if (skb == NULL) return; - tx_status(hw, skb, 0, 0, 0); + tx_status(hw, skb, 0, 0); } /** @@ -342,12 +341,12 @@ void zd_mac_tx_failed(struct ieee80211_hw *hw) void zd_mac_tx_to_dev(struct sk_buff *skb, int error) { struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb); - struct ieee80211_hw *hw = info->driver_data[0]; + struct ieee80211_hw *hw = info->rate_driver_data[0]; skb_pull(skb, sizeof(struct zd_ctrlset)); if (unlikely(error || (info->flags & IEEE80211_TX_CTL_NO_ACK))) { - tx_status(hw, skb, 0, 0, !error); + tx_status(hw, skb, 0, !error); } else { struct sk_buff_head *q = &zd_hw_mac(hw)->ack_wait_queue; @@ -406,7 +405,8 @@ static int zd_calc_tx_length_us(u8 *service, u8 zd_rate, u16 tx_length) } static void cs_set_control(struct zd_mac *mac, struct zd_ctrlset *cs, - struct ieee80211_hdr *header, u32 flags) + struct ieee80211_hdr *header, + struct ieee80211_tx_info *info) { /* * CONTROL TODO: @@ -417,7 +417,7 @@ static void cs_set_control(struct zd_mac *mac, struct zd_ctrlset *cs, cs->control = 0; /* First fragment */ - if (flags & IEEE80211_TX_CTL_FIRST_FRAGMENT) + if (info->flags & IEEE80211_TX_CTL_FIRST_FRAGMENT) cs->control |= ZD_CS_NEED_RANDOM_BACKOFF; /* Multicast */ @@ -428,10 +428,10 @@ static void cs_set_control(struct zd_mac *mac, struct zd_ctrlset *cs, if (ieee80211_is_pspoll(header->frame_control)) cs->control |= ZD_CS_PS_POLL_FRAME; - if (flags & IEEE80211_TX_CTL_USE_RTS_CTS) + if (info->control.rates[0].flags & IEEE80211_TX_RC_USE_RTS_CTS) cs->control |= ZD_CS_RTS; - if (flags & IEEE80211_TX_CTL_USE_CTS_PROTECT) + if (info->control.rates[0].flags & IEEE80211_TX_RC_USE_CTS_PROTECT) cs->control |= ZD_CS_SELF_CTS; /* FIXME: Management frame? */ @@ -517,12 +517,12 @@ static int fill_ctrlset(struct zd_mac *mac, txrate = ieee80211_get_tx_rate(mac->hw, info); cs->modulation = txrate->hw_value; - if (info->flags & IEEE80211_TX_CTL_SHORT_PREAMBLE) + if (info->control.rates[0].flags & IEEE80211_TX_RC_USE_SHORT_PREAMBLE) cs->modulation = txrate->hw_value_short; cs->tx_length = cpu_to_le16(frag_len); - cs_set_control(mac, cs, hdr, info->flags); + cs_set_control(mac, cs, hdr, info); packet_length = frag_len + sizeof(struct zd_ctrlset) + 10; ZD_ASSERT(packet_length <= 0xffff); @@ -577,7 +577,7 @@ static int zd_op_tx(struct ieee80211_hw *hw, struct sk_buff *skb) if (r) return r; - info->driver_data[0] = hw; + info->rate_driver_data[0] = hw; r = zd_usb_tx(&mac->chip.usb, skb); if (r) @@ -618,7 +618,7 @@ static int filter_ack(struct ieee80211_hw *hw, struct ieee80211_hdr *rx_hdr, if (likely(!compare_ether_addr(tx_hdr->addr2, rx_hdr->addr1))) { __skb_unlink(skb, q); - tx_status(hw, skb, IEEE80211_TX_STAT_ACK, stats->signal, 1); + tx_status(hw, skb, stats->signal, 1); goto out; } } diff --git a/drivers/net/wireless/zd1211rw/zd_usb.c b/drivers/net/wireless/zd1211rw/zd_usb.c index a60ae86bd5c..d7a2f52e40c 100644 --- a/drivers/net/wireless/zd1211rw/zd_usb.c +++ b/drivers/net/wireless/zd1211rw/zd_usb.c @@ -907,7 +907,7 @@ free_urb: * it might be freed by zd_mac_tx_to_dev or mac80211) */ info = IEEE80211_SKB_CB(skb); - usb = &zd_hw_mac(info->driver_data[0])->chip.usb; + usb = &zd_hw_mac(info->rate_driver_data[0])->chip.usb; zd_mac_tx_to_dev(skb, urb->status); free_tx_urb(usb, urb); tx_dec_submitted_urbs(usb); diff --git a/include/net/mac80211.h b/include/net/mac80211.h index 9801afb6254..3741c0a7978 100644 --- a/include/net/mac80211.h +++ b/include/net/mac80211.h @@ -214,29 +214,24 @@ struct ieee80211_bss_conf { * These flags are used with the @flags member of &ieee80211_tx_info. * * @IEEE80211_TX_CTL_REQ_TX_STATUS: request TX status callback for this frame. - * @IEEE80211_TX_CTL_USE_RTS_CTS: use RTS-CTS before sending frame - * @IEEE80211_TX_CTL_USE_CTS_PROTECT: use CTS protection for the frame (e.g., - * for combined 802.11g / 802.11b networks) + * @IEEE80211_TX_CTL_ASSIGN_SEQ: The driver has to assign a sequence + * number to this frame, taking care of not overwriting the fragment + * number and increasing the sequence number only when the + * IEEE80211_TX_CTL_FIRST_FRAGMENT flag is set. mac80211 will properly + * assign sequence numbers to QoS-data frames but cannot do so correctly + * for non-QoS-data and management frames because beacons need them from + * that counter as well and mac80211 cannot guarantee proper sequencing. + * If this flag is set, the driver should instruct the hardware to + * assign a sequence number to the frame or assign one itself. Cf. IEEE + * 802.11-2007 7.1.3.4.1 paragraph 3. This flag will always be set for + * beacons and always be clear for frames without a sequence number field. * @IEEE80211_TX_CTL_NO_ACK: tell the low level not to wait for an ack - * @IEEE80211_TX_CTL_RATE_CTRL_PROBE: TBD * @IEEE80211_TX_CTL_CLEAR_PS_FILT: clear powersave filter for destination * station - * @IEEE80211_TX_CTL_REQUEUE: TBD * @IEEE80211_TX_CTL_FIRST_FRAGMENT: this is a first fragment of the frame - * @IEEE80211_TX_CTL_SHORT_PREAMBLE: TBD - * @IEEE80211_TX_CTL_LONG_RETRY_LIMIT: this frame should be send using the - * through set_retry_limit configured long retry value * @IEEE80211_TX_CTL_SEND_AFTER_DTIM: send this frame after DTIM beacon * @IEEE80211_TX_CTL_AMPDU: this frame should be sent as part of an A-MPDU - * @IEEE80211_TX_CTL_OFDM_HT: this frame can be sent in HT OFDM rates. number - * of streams when this flag is on can be extracted from antenna_sel_tx, - * so if 1 antenna is marked use SISO, 2 antennas marked use MIMO, n - * antennas marked use MIMO_n. - * @IEEE80211_TX_CTL_GREEN_FIELD: use green field protection for this frame - * @IEEE80211_TX_CTL_40_MHZ_WIDTH: send this frame using 40 Mhz channel width - * @IEEE80211_TX_CTL_DUP_DATA: duplicate data frame on both 20 Mhz channels - * @IEEE80211_TX_CTL_SHORT_GI: send this frame using short guard interval - * @IEEE80211_TX_CTL_INJECTED: TBD + * @IEEE80211_TX_CTL_INJECTED: Frame was injected, internal to mac80211. * @IEEE80211_TX_STAT_TX_FILTERED: The frame was not transmitted * because the destination STA was in powersave mode. * @IEEE80211_TX_STAT_ACK: Frame was acknowledged @@ -244,62 +239,70 @@ struct ieee80211_bss_conf { * is for the whole aggregation. * @IEEE80211_TX_STAT_AMPDU_NO_BACK: no block ack was returned, * so consider using block ack request (BAR). - * @IEEE80211_TX_CTL_ASSIGN_SEQ: The driver has to assign a sequence - * number to this frame, taking care of not overwriting the fragment - * number and increasing the sequence number only when the - * IEEE80211_TX_CTL_FIRST_FRAGMENT flags is set. mac80211 will properly - * assign sequence numbers to QoS-data frames but cannot do so correctly - * for non-QoS-data and management frames because beacons need them from - * that counter as well and mac80211 cannot guarantee proper sequencing. - * If this flag is set, the driver should instruct the hardware to - * assign a sequence number to the frame or assign one itself. Cf. IEEE - * 802.11-2007 7.1.3.4.1 paragraph 3. This flag will always be set for - * beacons always be clear for frames without a sequence number field. + * @IEEE80211_TX_CTL_RATE_CTRL_PROBE: internal to mac80211, can be + * set by rate control algorithms to indicate probe rate, will + * be cleared for fragmented frames (except on the last fragment) + * @IEEE80211_TX_CTL_REQUEUE: REMOVE THIS */ enum mac80211_tx_control_flags { IEEE80211_TX_CTL_REQ_TX_STATUS = BIT(0), - IEEE80211_TX_CTL_USE_RTS_CTS = BIT(2), - IEEE80211_TX_CTL_USE_CTS_PROTECT = BIT(3), - IEEE80211_TX_CTL_NO_ACK = BIT(4), - IEEE80211_TX_CTL_RATE_CTRL_PROBE = BIT(5), - IEEE80211_TX_CTL_CLEAR_PS_FILT = BIT(6), - IEEE80211_TX_CTL_REQUEUE = BIT(7), - IEEE80211_TX_CTL_FIRST_FRAGMENT = BIT(8), - IEEE80211_TX_CTL_SHORT_PREAMBLE = BIT(9), - IEEE80211_TX_CTL_LONG_RETRY_LIMIT = BIT(10), - IEEE80211_TX_CTL_SEND_AFTER_DTIM = BIT(12), - IEEE80211_TX_CTL_AMPDU = BIT(13), - IEEE80211_TX_CTL_OFDM_HT = BIT(14), - IEEE80211_TX_CTL_GREEN_FIELD = BIT(15), - IEEE80211_TX_CTL_40_MHZ_WIDTH = BIT(16), - IEEE80211_TX_CTL_DUP_DATA = BIT(17), - IEEE80211_TX_CTL_SHORT_GI = BIT(18), - IEEE80211_TX_CTL_INJECTED = BIT(19), - IEEE80211_TX_STAT_TX_FILTERED = BIT(20), - IEEE80211_TX_STAT_ACK = BIT(21), - IEEE80211_TX_STAT_AMPDU = BIT(22), - IEEE80211_TX_STAT_AMPDU_NO_BACK = BIT(23), - IEEE80211_TX_CTL_ASSIGN_SEQ = BIT(24), + IEEE80211_TX_CTL_ASSIGN_SEQ = BIT(1), + IEEE80211_TX_CTL_NO_ACK = BIT(2), + IEEE80211_TX_CTL_CLEAR_PS_FILT = BIT(3), + IEEE80211_TX_CTL_FIRST_FRAGMENT = BIT(4), + IEEE80211_TX_CTL_SEND_AFTER_DTIM = BIT(5), + IEEE80211_TX_CTL_AMPDU = BIT(6), + IEEE80211_TX_CTL_INJECTED = BIT(7), + IEEE80211_TX_STAT_TX_FILTERED = BIT(8), + IEEE80211_TX_STAT_ACK = BIT(9), + IEEE80211_TX_STAT_AMPDU = BIT(10), + IEEE80211_TX_STAT_AMPDU_NO_BACK = BIT(11), + IEEE80211_TX_CTL_RATE_CTRL_PROBE = BIT(12), + + /* XXX: remove this */ + IEEE80211_TX_CTL_REQUEUE = BIT(13), }; +enum mac80211_rate_control_flags { + IEEE80211_TX_RC_USE_RTS_CTS = BIT(0), + IEEE80211_TX_RC_USE_CTS_PROTECT = BIT(1), + IEEE80211_TX_RC_USE_SHORT_PREAMBLE = BIT(2), + + /* rate index is an MCS rate number instead of an index */ + IEEE80211_TX_RC_MCS = BIT(3), + IEEE80211_TX_RC_GREEN_FIELD = BIT(4), + IEEE80211_TX_RC_40_MHZ_WIDTH = BIT(5), + IEEE80211_TX_RC_DUP_DATA = BIT(6), + IEEE80211_TX_RC_SHORT_GI = BIT(7), +}; + + +/* there are 40 bytes if you don't need the rateset to be kept */ +#define IEEE80211_TX_INFO_DRIVER_DATA_SIZE 40 -#define IEEE80211_TX_INFO_DRIVER_DATA_SIZE \ - (sizeof(((struct sk_buff *)0)->cb) - 8) -#define IEEE80211_TX_INFO_DRIVER_DATA_PTRS \ - (IEEE80211_TX_INFO_DRIVER_DATA_SIZE / sizeof(void *)) +/* if you do need the rateset, then you have less space */ +#define IEEE80211_TX_INFO_RATE_DRIVER_DATA_SIZE 24 -/* maximum number of alternate rate retry stages */ -#define IEEE80211_TX_MAX_ALTRATE 3 +/* maximum number of rate stages */ +#define IEEE80211_TX_MAX_RATES 5 /** - * struct ieee80211_tx_altrate - alternate rate selection/status + * struct ieee80211_tx_rate - rate selection/status * - * @rate_idx: rate index to attempt to send with + * @idx: rate index to attempt to send with + * @flags: rate control flags (&enum mac80211_rate_control_flags) * @limit: number of retries before fallback + * + * A value of -1 for @idx indicates an invalid rate and, if used + * in an array of retry rates, that no more rates should be tried. + * + * When used for transmit status reporting, the driver should + * always report the rate along with the flags it used. */ -struct ieee80211_tx_altrate { - s8 rate_idx; - u8 limit; +struct ieee80211_tx_rate { + s8 idx; + u8 count; + u8 flags; }; /** @@ -314,15 +317,12 @@ struct ieee80211_tx_altrate { * it may be NULL. * * @flags: transmit info flags, defined above - * @band: TBD - * @tx_rate_idx: TBD + * @band: the band to transmit on (use for checking for races) * @antenna_sel_tx: antenna to use, 0 for automatic diversity * @control: union for control data * @status: union for status data * @driver_data: array of driver_data pointers * @retry_count: number of retries - * @excessive_retries: set to 1 if the frame was retried many times - * but not acknowledged * @ampdu_ack_len: number of aggregated frames. * relevant only if IEEE80211_TX_STATUS_AMPDU was set. * @ampdu_ack_map: block ack bit map for the aggregation. @@ -333,31 +333,43 @@ struct ieee80211_tx_info { /* common information */ u32 flags; u8 band; - s8 tx_rate_idx; + u8 antenna_sel_tx; - /* 1 byte hole */ + /* 2 byte hole */ union { struct { + union { + /* rate control */ + struct { + struct ieee80211_tx_rate rates[ + IEEE80211_TX_MAX_RATES]; + s8 rts_cts_rate_idx; + }; + /* only needed before rate control */ + unsigned long jiffies; + }; /* NB: vif can be NULL for injected frames */ struct ieee80211_vif *vif; struct ieee80211_key_conf *hw_key; struct ieee80211_sta *sta; - unsigned long jiffies; - s8 rts_cts_rate_idx; - u8 retry_limit; - struct ieee80211_tx_altrate retries[IEEE80211_TX_MAX_ALTRATE]; } control; struct { + struct ieee80211_tx_rate rates[IEEE80211_TX_MAX_RATES]; + u8 ampdu_ack_len; u64 ampdu_ack_map; int ack_signal; - struct ieee80211_tx_altrate retries[IEEE80211_TX_MAX_ALTRATE + 1]; - u8 retry_count; - bool excessive_retries; - u8 ampdu_ack_len; + /* 8 bytes free */ } status; - void *driver_data[IEEE80211_TX_INFO_DRIVER_DATA_PTRS]; + struct { + struct ieee80211_tx_rate driver_rates[ + IEEE80211_TX_MAX_RATES]; + void *rate_driver_data[ + IEEE80211_TX_INFO_RATE_DRIVER_DATA_SIZE / sizeof(void *)]; + }; + void *driver_data[ + IEEE80211_TX_INFO_DRIVER_DATA_SIZE / sizeof(void *)]; }; }; @@ -366,6 +378,41 @@ static inline struct ieee80211_tx_info *IEEE80211_SKB_CB(struct sk_buff *skb) return (struct ieee80211_tx_info *)skb->cb; } +/** + * ieee80211_tx_info_clear_status - clear TX status + * + * @info: The &struct ieee80211_tx_info to be cleared. + * + * When the driver passes an skb back to mac80211, it must report + * a number of things in TX status. This function clears everything + * in the TX status but the rate control information (it does clear + * the count since you need to fill that in anyway). + * + * NOTE: You can only use this function if you do NOT use + * info->driver_data! Use info->rate_driver_data + * instead if you need only the less space that allows. + */ +static inline void +ieee80211_tx_info_clear_status(struct ieee80211_tx_info *info) +{ + int i; + + BUILD_BUG_ON(offsetof(struct ieee80211_tx_info, status.rates) != + offsetof(struct ieee80211_tx_info, control.rates)); + BUILD_BUG_ON(offsetof(struct ieee80211_tx_info, status.rates) != + offsetof(struct ieee80211_tx_info, driver_rates)); + BUILD_BUG_ON(offsetof(struct ieee80211_tx_info, status.rates) != 8); + /* clear the rate counts */ + for (i = 0; i < IEEE80211_TX_MAX_RATES; i++) + info->status.rates[i].count = 0; + + BUILD_BUG_ON( + offsetof(struct ieee80211_tx_info, status.ampdu_ack_len) != 23); + memset(&info->status.ampdu_ack_len, 0, + sizeof(struct ieee80211_tx_info) - + offsetof(struct ieee80211_tx_info, status.ampdu_ack_len)); +} + /** * enum mac80211_rx_flags - receive flags @@ -869,8 +916,8 @@ enum ieee80211_hw_flags { * @sta_data_size: size (in bytes) of the drv_priv data area * within &struct ieee80211_sta. * - * @max_altrates: maximum number of alternate rate retry stages - * @max_altrate_tries: maximum number of tries for each stage + * @max_rates: maximum number of alternate rate retry stages + * @max_rate_tries: maximum number of tries for each stage */ struct ieee80211_hw { struct ieee80211_conf conf; @@ -887,8 +934,8 @@ struct ieee80211_hw { u16 ampdu_queues; u16 max_listen_interval; s8 max_signal; - u8 max_altrates; - u8 max_altrate_tries; + u8 max_rates; + u8 max_rate_tries; }; /** @@ -927,9 +974,9 @@ static inline struct ieee80211_rate * ieee80211_get_tx_rate(const struct ieee80211_hw *hw, const struct ieee80211_tx_info *c) { - if (WARN_ON(c->tx_rate_idx < 0)) + if (WARN_ON(c->control.rates[0].idx < 0)) return NULL; - return &hw->wiphy->bands[c->band]->bitrates[c->tx_rate_idx]; + return &hw->wiphy->bands[c->band]->bitrates[c->control.rates[0].idx]; } static inline struct ieee80211_rate * @@ -945,9 +992,9 @@ static inline struct ieee80211_rate * ieee80211_get_alt_retry_rate(const struct ieee80211_hw *hw, const struct ieee80211_tx_info *c, int idx) { - if (c->control.retries[idx].rate_idx < 0) + if (c->control.rates[idx + 1].idx < 0) return NULL; - return &hw->wiphy->bands[c->band]->bitrates[c->control.retries[idx].rate_idx]; + return &hw->wiphy->bands[c->band]->bitrates[c->control.rates[idx + 1].idx]; } /** @@ -1840,17 +1887,30 @@ struct ieee80211_sta *ieee80211_find_sta(struct ieee80211_hw *hw, /* Rate control API */ + /** - * struct rate_selection - rate information for/from rate control algorithms - * - * @rate_idx: selected transmission rate index - * @nonerp_idx: Non-ERP rate to use instead if ERP cannot be used - * @probe_idx: rate for probing (or -1) - * @max_rate_idx: maximum rate index that can be used, this is - * input to the algorithm and will be enforced - */ -struct rate_selection { - s8 rate_idx, nonerp_idx, probe_idx, max_rate_idx; + * struct ieee80211_tx_rate_control - rate control information for/from RC algo + * + * @hw: The hardware the algorithm is invoked for. + * @sband: The band this frame is being transmitted on. + * @bss_conf: the current BSS configuration + * @reported_rate: The rate control algorithm can fill this in to indicate + * which rate should be reported to userspace as the current rate and + * used for rate calculations in the mesh network. + * @rts: whether RTS will be used for this frame because it is longer than the + * RTS threshold + * @short_preamble: whether mac80211 will request short-preamble transmission + * if the selected rate supports it + * @max_rate_idx: user-requested maximum rate (not MCS for now) + */ +struct ieee80211_tx_rate_control { + struct ieee80211_hw *hw; + struct ieee80211_supported_band *sband; + struct ieee80211_bss_conf *bss_conf; + struct sk_buff *skb; + struct ieee80211_tx_rate reported_rate; + bool rts, short_preamble; + u8 max_rate_idx; }; struct rate_control_ops { @@ -1869,10 +1929,8 @@ struct rate_control_ops { void (*tx_status)(void *priv, struct ieee80211_supported_band *sband, struct ieee80211_sta *sta, void *priv_sta, struct sk_buff *skb); - void (*get_rate)(void *priv, struct ieee80211_supported_band *sband, - struct ieee80211_sta *sta, void *priv_sta, - struct sk_buff *skb, - struct rate_selection *sel); + void (*get_rate)(void *priv, struct ieee80211_sta *sta, void *priv_sta, + struct ieee80211_tx_rate_control *txrc); void (*add_sta_debugfs)(void *priv, void *priv_sta, struct dentry *dir); diff --git a/net/mac80211/ieee80211_i.h b/net/mac80211/ieee80211_i.h index 6f8756d26a9..fe4efdd4253 100644 --- a/net/mac80211/ieee80211_i.h +++ b/net/mac80211/ieee80211_i.h @@ -142,7 +142,6 @@ typedef unsigned __bitwise__ ieee80211_tx_result; #define IEEE80211_TX_FRAGMENTED BIT(0) #define IEEE80211_TX_UNICAST BIT(1) #define IEEE80211_TX_PS_BUFFERED BIT(2) -#define IEEE80211_TX_PROBE_LAST_FRAG BIT(3) struct ieee80211_tx_data { struct sk_buff *skb; @@ -153,11 +152,6 @@ struct ieee80211_tx_data { struct ieee80211_key *key; struct ieee80211_channel *channel; - s8 rate_idx; - /* use this rate (if set) for last fragment; rate can - * be set to lower rate for the first fragments, e.g., - * when using CTS protection with IEEE 802.11g. */ - s8 last_frag_rate_idx; /* Extra fragments (in addition to the first fragment * in skb) */ @@ -203,9 +197,7 @@ struct ieee80211_rx_data { struct ieee80211_tx_stored_packet { struct sk_buff *skb; struct sk_buff **extra_frag; - s8 last_frag_rate_idx; int num_extra_frag; - bool last_frag_rate_ctrl_probe; }; struct beacon_data { diff --git a/net/mac80211/main.c b/net/mac80211/main.c index ffff54944f9..88c1975a97a 100644 --- a/net/mac80211/main.c +++ b/net/mac80211/main.c @@ -41,6 +41,8 @@ */ struct ieee80211_tx_status_rtap_hdr { struct ieee80211_radiotap_header hdr; + u8 rate; + u8 padding_for_rate; __le16 tx_flags; u8 data_retries; } __attribute__ ((packed)); @@ -465,13 +467,28 @@ void ieee80211_tx_status(struct ieee80211_hw *hw, struct sk_buff *skb) struct ieee80211_sub_if_data *sdata; struct net_device *prev_dev = NULL; struct sta_info *sta; + int retry_count = -1, i; + + for (i = 0; i < IEEE80211_TX_MAX_RATES; i++) { + /* the HW cannot have attempted that rate */ + if (i >= hw->max_rates) { + info->status.rates[i].idx = -1; + info->status.rates[i].count = 0; + } + + retry_count += info->status.rates[i].count; + } + if (retry_count < 0) + retry_count = 0; rcu_read_lock(); + sband = local->hw.wiphy->bands[info->band]; + sta = sta_info_get(local, hdr->addr1); if (sta) { - if (info->status.excessive_retries && + if (!(info->flags & IEEE80211_TX_STAT_ACK) && test_sta_flags(sta, WLAN_STA_PS)) { /* * The STA is in power save mode, so assume @@ -502,12 +519,11 @@ void ieee80211_tx_status(struct ieee80211_hw *hw, struct sk_buff *skb) rcu_read_unlock(); return; } else { - if (info->status.excessive_retries) + if (!(info->flags & IEEE80211_TX_STAT_ACK)) sta->tx_retry_failed++; - sta->tx_retry_count += info->status.retry_count; + sta->tx_retry_count += retry_count; } - sband = local->hw.wiphy->bands[info->band]; rate_control_tx_status(local, sband, sta, skb); } @@ -528,9 +544,9 @@ void ieee80211_tx_status(struct ieee80211_hw *hw, struct sk_buff *skb) local->dot11TransmittedFrameCount++; if (is_multicast_ether_addr(hdr->addr1)) local->dot11MulticastTransmittedFrameCount++; - if (info->status.retry_count > 0) + if (retry_count > 0) local->dot11RetryCount++; - if (info->status.retry_count > 1) + if (retry_count > 1) local->dot11MultipleRetryCount++; } @@ -574,19 +590,30 @@ void ieee80211_tx_status(struct ieee80211_hw *hw, struct sk_buff *skb) rthdr->hdr.it_len = cpu_to_le16(sizeof(*rthdr)); rthdr->hdr.it_present = cpu_to_le32((1 << IEEE80211_RADIOTAP_TX_FLAGS) | - (1 << IEEE80211_RADIOTAP_DATA_RETRIES)); + (1 << IEEE80211_RADIOTAP_DATA_RETRIES) | + (1 << IEEE80211_RADIOTAP_RATE)); if (!(info->flags & IEEE80211_TX_STAT_ACK) && !is_multicast_ether_addr(hdr->addr1)) rthdr->tx_flags |= cpu_to_le16(IEEE80211_RADIOTAP_F_TX_FAIL); - if ((info->flags & IEEE80211_TX_CTL_USE_RTS_CTS) && - (info->flags & IEEE80211_TX_CTL_USE_CTS_PROTECT)) + /* + * XXX: Once radiotap gets the bitmap reset thing the vendor + * extensions proposal contains, we can actually report + * the whole set of tries we did. + */ + if ((info->status.rates[0].flags & IEEE80211_TX_RC_USE_RTS_CTS) || + (info->status.rates[0].flags & IEEE80211_TX_RC_USE_CTS_PROTECT)) rthdr->tx_flags |= cpu_to_le16(IEEE80211_RADIOTAP_F_TX_CTS); - else if (info->flags & IEEE80211_TX_CTL_USE_RTS_CTS) + else if (info->status.rates[0].flags & IEEE80211_TX_RC_USE_RTS_CTS) rthdr->tx_flags |= cpu_to_le16(IEEE80211_RADIOTAP_F_TX_RTS); + if (info->status.rates[0].idx >= 0 && + !(info->status.rates[0].flags & IEEE80211_TX_RC_MCS)) + rthdr->rate = sband->bitrates[ + info->status.rates[0].idx].bitrate / 5; - rthdr->data_retries = info->status.retry_count; + /* for now report the total retry_count */ + rthdr->data_retries = retry_count; /* XXX: is this sufficient for BPF? */ skb_set_mac_header(skb, 0); @@ -671,8 +698,9 @@ struct ieee80211_hw *ieee80211_alloc_hw(size_t priv_data_len, BUG_ON(!ops->configure_filter); local->ops = ops; - local->hw.queues = 1; /* default */ - + /* set up some defaults */ + local->hw.queues = 1; + local->hw.max_rates = 1; local->rts_threshold = IEEE80211_MAX_RTS_THRESHOLD; local->fragmentation_threshold = IEEE80211_MAX_FRAG_THRESHOLD; local->hw.conf.long_frame_max_tx_count = 4; diff --git a/net/mac80211/mesh_hwmp.c b/net/mac80211/mesh_hwmp.c index 501c7831adb..e8d573d592e 100644 --- a/net/mac80211/mesh_hwmp.c +++ b/net/mac80211/mesh_hwmp.c @@ -218,12 +218,16 @@ static u32 airtime_link_metric_get(struct ieee80211_local *local, if (sta->fail_avg >= 100) return MAX_METRIC; + + if (sta->last_tx_rate.flags & IEEE80211_TX_RC_MCS) + return MAX_METRIC; + err = (sta->fail_avg << ARITH_SHIFT) / 100; /* bitrate is in units of 100 Kbps, while we need rate in units of * 1Mbps. This will be corrected on tx_time computation. */ - rate = sband->bitrates[sta->last_txrate_idx].bitrate; + rate = sband->bitrates[sta->last_tx_rate.idx].bitrate; tx_time = (device_constant + 10 * test_frame_len / rate); estimated_retx = ((1 << (2 * ARITH_SHIFT)) / (s_unit - err)); result = (tx_time * estimated_retx) >> (2 * ARITH_SHIFT) ; diff --git a/net/mac80211/rate.c b/net/mac80211/rate.c index 5d786720d93..3fa7ab28506 100644 --- a/net/mac80211/rate.c +++ b/net/mac80211/rate.c @@ -199,48 +199,44 @@ static void rate_control_release(struct kref *kref) } void rate_control_get_rate(struct ieee80211_sub_if_data *sdata, - struct ieee80211_supported_band *sband, - struct sta_info *sta, struct sk_buff *skb, - struct rate_selection *sel) + struct sta_info *sta, + struct ieee80211_tx_rate_control *txrc) { struct rate_control_ref *ref = sdata->local->rate_ctrl; void *priv_sta = NULL; struct ieee80211_sta *ista = NULL; + struct ieee80211_tx_info *info = IEEE80211_SKB_CB(txrc->skb); int i; - sel->rate_idx = -1; - sel->nonerp_idx = -1; - sel->probe_idx = -1; - sel->max_rate_idx = sdata->max_ratectrl_rateidx; - if (sta) { ista = &sta->sta; priv_sta = sta->rate_ctrl_priv; } + for (i = 0; i < IEEE80211_TX_MAX_RATES; i++) { + info->control.rates[i].idx = -1; + info->control.rates[i].flags = 0; + info->control.rates[i].count = 1; + } + if (sta && sdata->force_unicast_rateidx > -1) - sel->rate_idx = sdata->force_unicast_rateidx; + info->control.rates[0].idx = sdata->force_unicast_rateidx; else - ref->ops->get_rate(ref->priv, sband, ista, priv_sta, skb, sel); - - if (sdata->max_ratectrl_rateidx > -1 && - sel->rate_idx > sdata->max_ratectrl_rateidx) - sel->rate_idx = sdata->max_ratectrl_rateidx; - - BUG_ON(sel->rate_idx < 0); - - /* Select a non-ERP backup rate. */ - if (sel->nonerp_idx < 0) { - for (i = 0; i < sband->n_bitrates; i++) { - struct ieee80211_rate *rate = &sband->bitrates[i]; - if (sband->bitrates[sel->rate_idx].bitrate < rate->bitrate) - break; - - if (rate_supported(ista, sband->band, i) && - !(rate->flags & IEEE80211_RATE_ERP_G)) - sel->nonerp_idx = i; - } + ref->ops->get_rate(ref->priv, ista, priv_sta, txrc); + + /* + * try to enforce the maximum rate the user wanted + */ + if (sdata->max_ratectrl_rateidx > -1) + for (i = 0; i < IEEE80211_TX_MAX_RATES; i++) { + if (info->control.rates[i].flags & IEEE80211_TX_RC_MCS) + continue; + info->control.rates[i].idx = + min_t(s8, info->control.rates[i].idx, + sdata->max_ratectrl_rateidx); } + + BUG_ON(info->control.rates[0].idx < 0); } struct rate_control_ref *rate_control_get(struct rate_control_ref *ref) diff --git a/net/mac80211/rate.h b/net/mac80211/rate.h index d0092f847f8..7c25edf9ac5 100644 --- a/net/mac80211/rate.h +++ b/net/mac80211/rate.h @@ -31,9 +31,8 @@ struct rate_control_ref { struct rate_control_ref *rate_control_alloc(const char *name, struct ieee80211_local *local); void rate_control_get_rate(struct ieee80211_sub_if_data *sdata, - struct ieee80211_supported_band *sband, - struct sta_info *sta, struct sk_buff *skb, - struct rate_selection *sel); + struct sta_info *sta, + struct ieee80211_tx_rate_control *txrc); struct rate_control_ref *rate_control_get(struct rate_control_ref *ref); void rate_control_put(struct rate_control_ref *ref); diff --git a/net/mac80211/rc80211_minstrel.c b/net/mac80211/rc80211_minstrel.c index f6d69dab07a..759ddd8bf0f 100644 --- a/net/mac80211/rc80211_minstrel.c +++ b/net/mac80211/rc80211_minstrel.c @@ -169,30 +169,20 @@ minstrel_tx_status(void *priv, struct ieee80211_supported_band *sband, { struct minstrel_sta_info *mi = priv_sta; struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb); - struct ieee80211_tx_altrate *ar = info->status.retries; - struct minstrel_priv *mp = priv; - int i, ndx, tries; - int success = 0; + struct ieee80211_tx_rate *ar = info->status.rates; + int i, ndx; + int success; - if (!info->status.excessive_retries) - success = 1; + success = !!(info->flags & IEEE80211_TX_STAT_ACK); - if (!mp->has_mrr || (ar[0].rate_idx < 0)) { - ndx = rix_to_ndx(mi, info->tx_rate_idx); - tries = info->status.retry_count + 1; - mi->r[ndx].success += success; - mi->r[ndx].attempts += tries; - return; - } - - for (i = 0; i < 4; i++) { - if (ar[i].rate_idx < 0) + for (i = 0; i < IEEE80211_TX_MAX_RATES; i++) { + if (ar[i].idx < 0) break; - ndx = rix_to_ndx(mi, ar[i].rate_idx); - mi->r[ndx].attempts += ar[i].limit + 1; + ndx = rix_to_ndx(mi, ar[i].idx); + mi->r[ndx].attempts += ar[i].count; - if ((i != 3) && (ar[i + 1].rate_idx < 0)) + if ((i != IEEE80211_TX_MAX_RATES - 1) && (ar[i + 1].idx < 0)) mi->r[ndx].success += success; } @@ -210,9 +200,9 @@ minstrel_get_retry_count(struct minstrel_rate *mr, { unsigned int retry = mr->adjusted_retry_count; - if (info->flags & IEEE80211_TX_CTL_USE_RTS_CTS) + if (info->control.rates[0].flags & IEEE80211_TX_RC_USE_RTS_CTS) retry = max(2U, min(mr->retry_count_rtscts, retry)); - else if (info->flags & IEEE80211_TX_CTL_USE_CTS_PROTECT) + else if (info->control.rates[0].flags & IEEE80211_TX_RC_USE_CTS_PROTECT) retry = max(2U, min(mr->retry_count_cts, retry)); return retry; } @@ -234,14 +224,15 @@ minstrel_get_next_sample(struct minstrel_sta_info *mi) } void -minstrel_get_rate(void *priv, struct ieee80211_supported_band *sband, - struct ieee80211_sta *sta, void *priv_sta, - struct sk_buff *skb, struct rate_selection *sel) +minstrel_get_rate(void *priv, struct ieee80211_sta *sta, + void *priv_sta, struct ieee80211_tx_rate_control *txrc) { + struct sk_buff *skb = txrc->skb; + struct ieee80211_supported_band *sband = txrc->sband; struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb); struct minstrel_sta_info *mi = priv_sta; struct minstrel_priv *mp = priv; - struct ieee80211_tx_altrate *ar = info->control.retries; + struct ieee80211_tx_rate *ar = info->control.rates; unsigned int ndx, sample_ndx = 0; bool mrr; bool sample_slower = false; @@ -251,16 +242,12 @@ minstrel_get_rate(void *priv, struct ieee80211_supported_band *sband, int sample_rate; if (!sta || !mi || use_low_rate(skb)) { - sel->rate_idx = rate_lowest_index(sband, sta); + ar[0].idx = rate_lowest_index(sband, sta); + ar[0].count = mp->max_retry; return; } - mrr = mp->has_mrr; - - /* mac80211 does not allow mrr for RTS/CTS */ - if ((info->flags & IEEE80211_TX_CTL_USE_RTS_CTS) || - (info->flags & IEEE80211_TX_CTL_USE_CTS_PROTECT)) - mrr = false; + mrr = mp->has_mrr && !txrc->rts && !txrc->bss_conf->use_cts_prot; if (time_after(jiffies, mi->stats_update + (mp->update_interval * HZ) / 1000)) @@ -315,13 +302,12 @@ minstrel_get_rate(void *priv, struct ieee80211_supported_band *sband, mi->sample_deferred++; } } - sel->rate_idx = mi->r[ndx].rix; - info->control.retry_limit = minstrel_get_retry_count(&mi->r[ndx], info); + ar[0].idx = mi->r[ndx].rix; + ar[0].count = minstrel_get_retry_count(&mi->r[ndx], info); if (!mrr) { - ar[0].rate_idx = mi->lowest_rix; - ar[0].limit = mp->max_retry; - ar[1].rate_idx = -1; + ar[1].idx = mi->lowest_rix; + ar[1].count = mp->max_retry; return; } @@ -336,9 +322,9 @@ minstrel_get_rate(void *priv, struct ieee80211_supported_band *sband, } mrr_ndx[1] = mi->max_prob_rate; mrr_ndx[2] = 0; - for (i = 0; i < 3; i++) { - ar[i].rate_idx = mi->r[mrr_ndx[i]].rix; - ar[i].limit = mi->r[mrr_ndx[i]].adjusted_retry_count; + for (i = 1; i < 4; i++) { + ar[i].idx = mi->r[mrr_ndx[i - 1]].rix; + ar[i].count = mi->r[mrr_ndx[i - 1]].adjusted_retry_count; } } @@ -532,13 +518,13 @@ minstrel_alloc(struct ieee80211_hw *hw, struct dentry *debugfsdir) /* maximum time that the hw is allowed to stay in one MRR segment */ mp->segment_size = 6000; - if (hw->max_altrate_tries > 0) - mp->max_retry = hw->max_altrate_tries; + if (hw->max_rate_tries > 0) + mp->max_retry = hw->max_rate_tries; else /* safe default, does not necessarily have to match hw properties */ mp->max_retry = 7; - if (hw->max_altrates >= 3) + if (hw->max_rates >= 4) mp->has_mrr = true; mp->hw = hw; diff --git a/net/mac80211/rc80211_pid.h b/net/mac80211/rc80211_pid.h index ce099ea1d5d..1a873f00691 100644 --- a/net/mac80211/rc80211_pid.h +++ b/net/mac80211/rc80211_pid.h @@ -61,6 +61,7 @@ enum rc_pid_event_type { union rc_pid_event_data { /* RC_PID_EVENT_TX_STATUS */ struct { + u32 flags; struct ieee80211_tx_info tx_status; }; /* RC_PID_EVENT_TYPE_RATE_CHANGE */ diff --git a/net/mac80211/rc80211_pid_algo.c b/net/mac80211/rc80211_pid_algo.c index 86eb374e3b8..92caecfcee7 100644 --- a/net/mac80211/rc80211_pid_algo.c +++ b/net/mac80211/rc80211_pid_algo.c @@ -241,7 +241,7 @@ static void rate_control_pid_tx_status(void *priv, struct ieee80211_supported_ba /* Ignore all frames that were sent with a different rate than the rate * we currently advise mac80211 to use. */ - if (info->tx_rate_idx != spinfo->txrate_idx) + if (info->status.rates[0].idx != spinfo->txrate_idx) return; spinfo->tx_num_xmit++; @@ -253,10 +253,10 @@ static void rate_control_pid_tx_status(void *priv, struct ieee80211_supported_ba /* We count frames that totally failed to be transmitted as two bad * frames, those that made it out but had some retries as one good and * one bad frame. */ - if (info->status.excessive_retries) { + if (!(info->flags & IEEE80211_TX_STAT_ACK)) { spinfo->tx_num_failed += 2; spinfo->tx_num_xmit++; - } else if (info->status.retry_count) { + } else if (info->status.rates[0].count) { spinfo->tx_num_failed++; spinfo->tx_num_xmit++; } @@ -270,23 +270,32 @@ static void rate_control_pid_tx_status(void *priv, struct ieee80211_supported_ba } static void -rate_control_pid_get_rate(void *priv, struct ieee80211_supported_band *sband, - struct ieee80211_sta *sta, void *priv_sta, - struct sk_buff *skb, - struct rate_selection *sel) +rate_control_pid_get_rate(void *priv, struct ieee80211_sta *sta, + void *priv_sta, + struct ieee80211_tx_rate_control *txrc) { + struct sk_buff *skb = txrc->skb; + struct ieee80211_supported_band *sband = txrc->sband; struct ieee80211_hdr *hdr = (struct ieee80211_hdr *) skb->data; + struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb); struct rc_pid_sta_info *spinfo = priv_sta; int rateidx; u16 fc; + if (txrc->rts) + info->control.rates[0].count = + txrc->hw->conf.long_frame_max_tx_count; + else + info->control.rates[0].count = + txrc->hw->conf.short_frame_max_tx_count; + /* Send management frames and broadcast/multicast data using lowest * rate. */ fc = le16_to_cpu(hdr->frame_control); if (!sta || !spinfo || (fc & IEEE80211_FCTL_FTYPE) != IEEE80211_FTYPE_DATA || is_multicast_ether_addr(hdr->addr1)) { - sel->rate_idx = rate_lowest_index(sband, sta); + info->control.rates[0].idx = rate_lowest_index(sband, sta); return; } @@ -295,7 +304,7 @@ rate_control_pid_get_rate(void *priv, struct ieee80211_supported_band *sband, if (rateidx >= sband->n_bitrates) rateidx = sband->n_bitrates - 1; - sel->rate_idx = rateidx; + info->control.rates[0].idx = rateidx; #ifdef CONFIG_MAC80211_DEBUGFS rate_control_pid_event_tx_rate(&spinfo->events, diff --git a/net/mac80211/rc80211_pid_debugfs.c b/net/mac80211/rc80211_pid_debugfs.c index 8121d3bc683..a08a9b53034 100644 --- a/net/mac80211/rc80211_pid_debugfs.c +++ b/net/mac80211/rc80211_pid_debugfs.c @@ -43,6 +43,7 @@ void rate_control_pid_event_tx_status(struct rc_pid_event_buffer *buf, { union rc_pid_event_data evd; + evd.flags = stat->flags; memcpy(&evd.tx_status, stat, sizeof(struct ieee80211_tx_info)); rate_control_pid_event(buf, RC_PID_EVENT_TYPE_TX_STATUS, &evd); } @@ -167,8 +168,8 @@ static ssize_t rate_control_pid_events_read(struct file *file, char __user *buf, switch (ev->type) { case RC_PID_EVENT_TYPE_TX_STATUS: p += snprintf(pb + p, length - p, "tx_status %u %u", - ev->data.tx_status.status.excessive_retries, - ev->data.tx_status.status.retry_count); + !(ev->data.flags & IEEE80211_TX_STAT_ACK), + ev->data.tx_status.status.rates[0].idx); break; case RC_PID_EVENT_TYPE_RATE_CHANGE: p += snprintf(pb + p, length - p, "rate_change %d %d", diff --git a/net/mac80211/sta_info.h b/net/mac80211/sta_info.h index 168a39a298b..4ac372aa75c 100644 --- a/net/mac80211/sta_info.h +++ b/net/mac80211/sta_info.h @@ -196,7 +196,7 @@ struct sta_ampdu_mlme { * @tx_packets: number of RX/TX MSDUs * @tx_bytes: TBD * @tx_fragments: number of transmitted MPDUs - * @last_txrate_idx: Index of the last used transmit rate + * @last_txrate: description of the last used transmit rate * @tid_seq: TBD * @ampdu_mlme: TBD * @timer_to_tid: identity mapping to ID timers @@ -267,7 +267,7 @@ struct sta_info { unsigned long tx_packets; unsigned long tx_bytes; unsigned long tx_fragments; - unsigned int last_txrate_idx; + struct ieee80211_tx_rate last_tx_rate; u16 tid_seq[IEEE80211_QOS_CTL_TID_MASK + 1]; /* diff --git a/net/mac80211/tx.c b/net/mac80211/tx.c index 6f3e4be9763..21951bac1ef 100644 --- a/net/mac80211/tx.c +++ b/net/mac80211/tx.c @@ -46,13 +46,20 @@ static __le16 ieee80211_duration(struct ieee80211_tx_data *tx, int group_addr, struct ieee80211_local *local = tx->local; struct ieee80211_supported_band *sband; struct ieee80211_hdr *hdr; + struct ieee80211_tx_info *info = IEEE80211_SKB_CB(tx->skb); + + /* assume HW handles this */ + if (info->control.rates[0].flags & IEEE80211_TX_RC_MCS) + return 0; + + /* uh huh? */ + if (WARN_ON_ONCE(info->control.rates[0].idx < 0)) + return 0; sband = local->hw.wiphy->bands[tx->channel->band]; - txrate = &sband->bitrates[tx->rate_idx]; + txrate = &sband->bitrates[info->control.rates[0].idx]; - erp = 0; - if (tx->sdata->flags & IEEE80211_SDATA_OPERATING_GMODE) - erp = txrate->flags & IEEE80211_RATE_ERP_G; + erp = txrate->flags & IEEE80211_RATE_ERP_G; /* * data and mgmt (except PS Poll): @@ -437,140 +444,154 @@ ieee80211_tx_h_select_key(struct ieee80211_tx_data *tx) static ieee80211_tx_result debug_noinline ieee80211_tx_h_rate_ctrl(struct ieee80211_tx_data *tx) { - struct rate_selection rsel; - struct ieee80211_supported_band *sband; struct ieee80211_tx_info *info = IEEE80211_SKB_CB(tx->skb); + struct ieee80211_hdr *hdr = (void *)tx->skb->data; + struct ieee80211_supported_band *sband; + struct ieee80211_rate *rate; + int i, len; + bool inval = false, rts = false, short_preamble = false; + struct ieee80211_tx_rate_control txrc; - sband = tx->local->hw.wiphy->bands[tx->channel->band]; + memset(&txrc, 0, sizeof(txrc)); - if (likely(tx->rate_idx < 0)) { - rate_control_get_rate(tx->sdata, sband, tx->sta, - tx->skb, &rsel); - if (tx->sta) - tx->sta->last_txrate_idx = rsel.rate_idx; - tx->rate_idx = rsel.rate_idx; - if (unlikely(rsel.probe_idx >= 0)) { - info->flags |= IEEE80211_TX_CTL_RATE_CTRL_PROBE; - tx->flags |= IEEE80211_TX_PROBE_LAST_FRAG; - info->control.retries[0].rate_idx = tx->rate_idx; - info->control.retries[0].limit = tx->local->hw.max_altrate_tries; - tx->rate_idx = rsel.probe_idx; - } else if (info->control.retries[0].limit == 0) - info->control.retries[0].rate_idx = -1; - - if (unlikely(tx->rate_idx < 0)) - return TX_DROP; - } else - info->control.retries[0].rate_idx = -1; + sband = tx->local->hw.wiphy->bands[tx->channel->band]; - if (tx->sdata->vif.bss_conf.use_cts_prot && - (tx->flags & IEEE80211_TX_FRAGMENTED) && (rsel.nonerp_idx >= 0)) { - tx->last_frag_rate_idx = tx->rate_idx; - if (rsel.probe_idx >= 0) - tx->flags &= ~IEEE80211_TX_PROBE_LAST_FRAG; - else - tx->flags |= IEEE80211_TX_PROBE_LAST_FRAG; - tx->rate_idx = rsel.nonerp_idx; - info->tx_rate_idx = rsel.nonerp_idx; - info->flags &= ~IEEE80211_TX_CTL_RATE_CTRL_PROBE; - } else { - tx->last_frag_rate_idx = tx->rate_idx; - info->tx_rate_idx = tx->rate_idx; + len = min_t(int, tx->skb->len + FCS_LEN, + tx->local->fragmentation_threshold); + + /* set up the tx rate control struct we give the RC algo */ + txrc.hw = local_to_hw(tx->local); + txrc.sband = sband; + txrc.bss_conf = &tx->sdata->vif.bss_conf; + txrc.skb = tx->skb; + txrc.reported_rate.idx = -1; + txrc.max_rate_idx = tx->sdata->max_ratectrl_rateidx; + + /* set up RTS protection if desired */ + if (tx->local->rts_threshold < IEEE80211_MAX_RTS_THRESHOLD && + len > tx->local->rts_threshold) { + txrc.rts = rts = true; } - info->tx_rate_idx = tx->rate_idx; - return TX_CONTINUE; -} + /* + * Use short preamble if the BSS can handle it, but not for + * management frames unless we know the receiver can handle + * that -- the management frame might be to a station that + * just wants a probe response. + */ + if (tx->sdata->vif.bss_conf.use_short_preamble && + (ieee80211_is_data(hdr->frame_control) || + (tx->sta && test_sta_flags(tx->sta, WLAN_STA_SHORT_PREAMBLE)))) + txrc.short_preamble = short_preamble = true; -static ieee80211_tx_result debug_noinline -ieee80211_tx_h_misc(struct ieee80211_tx_data *tx) -{ - struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)tx->skb->data; - struct ieee80211_tx_info *info = IEEE80211_SKB_CB(tx->skb); - struct ieee80211_supported_band *sband; - sband = tx->local->hw.wiphy->bands[tx->channel->band]; + rate_control_get_rate(tx->sdata, tx->sta, &txrc); + + if (unlikely(info->control.rates[0].idx < 0)) + return TX_DROP; + + if (txrc.reported_rate.idx < 0) + txrc.reported_rate = info->control.rates[0]; if (tx->sta) - info->control.sta = &tx->sta->sta; + tx->sta->last_tx_rate = txrc.reported_rate; - if (!info->control.retry_limit) { - if (!is_multicast_ether_addr(hdr->addr1)) { - int len = min_t(int, tx->skb->len + FCS_LEN, - tx->local->fragmentation_threshold); - if (len > tx->local->rts_threshold - && tx->local->rts_threshold < - IEEE80211_MAX_RTS_THRESHOLD) { - info->flags |= IEEE80211_TX_CTL_USE_RTS_CTS; - info->flags |= - IEEE80211_TX_CTL_LONG_RETRY_LIMIT; - info->control.retry_limit = - tx->local->hw.conf.long_frame_max_tx_count - 1; - } else { - info->control.retry_limit = - tx->local->hw.conf.short_frame_max_tx_count - 1; - } - } else { - info->control.retry_limit = 1; - } - } + if (unlikely(!info->control.rates[0].count)) + info->control.rates[0].count = 1; - if (tx->flags & IEEE80211_TX_FRAGMENTED) { - /* Do not use multiple retry rates when sending fragmented - * frames. - * TODO: The last fragment could still use multiple retry - * rates. */ - info->control.retries[0].rate_idx = -1; + if (is_multicast_ether_addr(hdr->addr1)) { + /* + * XXX: verify the rate is in the basic rateset + */ + return TX_CONTINUE; } - /* Use CTS protection for unicast frames sent using extended rates if - * there are associated non-ERP stations and RTS/CTS is not configured - * for the frame. */ - if ((tx->sdata->flags & IEEE80211_SDATA_OPERATING_GMODE) && - (sband->bitrates[tx->rate_idx].flags & IEEE80211_RATE_ERP_G) && - (tx->flags & IEEE80211_TX_UNICAST) && - tx->sdata->vif.bss_conf.use_cts_prot && - !(info->flags & IEEE80211_TX_CTL_USE_RTS_CTS)) - info->flags |= IEEE80211_TX_CTL_USE_CTS_PROTECT; - - /* Transmit data frames using short preambles if the driver supports - * short preambles at the selected rate and short preambles are - * available on the network at the current point in time. */ - if (ieee80211_is_data(hdr->frame_control) && - (sband->bitrates[tx->rate_idx].flags & IEEE80211_RATE_SHORT_PREAMBLE) && - tx->sdata->vif.bss_conf.use_short_preamble && - (!tx->sta || test_sta_flags(tx->sta, WLAN_STA_SHORT_PREAMBLE))) { - info->flags |= IEEE80211_TX_CTL_SHORT_PREAMBLE; + /* + * set up the RTS/CTS rate as the fastest basic rate + * that is not faster than the data rate + * + * XXX: Should this check all retry rates? + */ + if (!(info->control.rates[0].flags & IEEE80211_TX_RC_MCS)) { + s8 baserate = 0; + + rate = &sband->bitrates[info->control.rates[0].idx]; + + for (i = 0; i < sband->n_bitrates; i++) { + /* must be a basic rate */ + if (!(tx->sdata->vif.bss_conf.basic_rates & BIT(i))) + continue; + /* must not be faster than the data rate */ + if (sband->bitrates[i].bitrate > rate->bitrate) + continue; + /* maximum */ + if (sband->bitrates[baserate].bitrate < + sband->bitrates[i].bitrate) + baserate = i; + } + + info->control.rts_cts_rate_idx = baserate; } - if ((info->flags & IEEE80211_TX_CTL_USE_RTS_CTS) || - (info->flags & IEEE80211_TX_CTL_USE_CTS_PROTECT)) { - struct ieee80211_rate *rate; - s8 baserate = -1; - int idx; + for (i = 0; i < IEEE80211_TX_MAX_RATES; i++) { + /* + * make sure there's no valid rate following + * an invalid one, just in case drivers don't + * take the API seriously to stop at -1. + */ + if (inval) { + info->control.rates[i].idx = -1; + continue; + } + if (info->control.rates[i].idx < 0) { + inval = true; + continue; + } - /* Do not use multiple retry rates when using RTS/CTS */ - info->control.retries[0].rate_idx = -1; + /* + * For now assume MCS is already set up correctly, this + * needs to be fixed. + */ + if (info->control.rates[i].flags & IEEE80211_TX_RC_MCS) { + WARN_ON(info->control.rates[i].idx > 76); + continue; + } - /* Use min(data rate, max base rate) as CTS/RTS rate */ - rate = &sband->bitrates[tx->rate_idx]; + /* set up RTS protection if desired */ + if (rts) + info->control.rates[i].flags |= + IEEE80211_TX_RC_USE_RTS_CTS; - for (idx = 0; idx < sband->n_bitrates; idx++) { - if (sband->bitrates[idx].bitrate > rate->bitrate) - continue; - if (tx->sdata->vif.bss_conf.basic_rates & BIT(idx) && - (baserate < 0 || - (sband->bitrates[baserate].bitrate - < sband->bitrates[idx].bitrate))) - baserate = idx; + /* RC is busted */ + if (WARN_ON(info->control.rates[i].idx >= + sband->n_bitrates)) { + info->control.rates[i].idx = -1; + continue; } - if (baserate >= 0) - info->control.rts_cts_rate_idx = baserate; - else - info->control.rts_cts_rate_idx = 0; + rate = &sband->bitrates[info->control.rates[i].idx]; + + /* set up short preamble */ + if (short_preamble && + rate->flags & IEEE80211_RATE_SHORT_PREAMBLE) + info->control.rates[i].flags |= + IEEE80211_TX_RC_USE_SHORT_PREAMBLE; + + /* set up G protection */ + if (!rts && tx->sdata->vif.bss_conf.use_cts_prot && + rate->flags & IEEE80211_RATE_ERP_G) + info->control.rates[i].flags |= + IEEE80211_TX_RC_USE_CTS_PROTECT; } + return TX_CONTINUE; +} + +static ieee80211_tx_result debug_noinline +ieee80211_tx_h_misc(struct ieee80211_tx_data *tx) +{ + struct ieee80211_tx_info *info = IEEE80211_SKB_CB(tx->skb); + if (tx->sta) info->control.sta = &tx->sta->sta; @@ -678,6 +699,7 @@ ieee80211_tx_h_fragment(struct ieee80211_tx_data *tx) left = payload_len - per_fragm; for (i = 0; i < num_fragm - 1; i++) { struct ieee80211_hdr *fhdr; + struct ieee80211_tx_info *info; size_t copylen; if (left <= 0) @@ -692,20 +714,45 @@ ieee80211_tx_h_fragment(struct ieee80211_tx_data *tx) IEEE80211_ENCRYPT_TAILROOM); if (!frag) goto fail; + /* Make sure that all fragments use the same priority so * that they end up using the same TX queue */ frag->priority = first->priority; + skb_reserve(frag, tx->local->tx_headroom + IEEE80211_ENCRYPT_HEADROOM); + + /* copy TX information */ + info = IEEE80211_SKB_CB(frag); + memcpy(info, first->cb, sizeof(frag->cb)); + + /* copy/fill in 802.11 header */ fhdr = (struct ieee80211_hdr *) skb_put(frag, hdrlen); memcpy(fhdr, first->data, hdrlen); - if (i == num_fragm - 2) - fhdr->frame_control &= cpu_to_le16(~IEEE80211_FCTL_MOREFRAGS); fhdr->seq_ctrl = cpu_to_le16(seq | ((i + 1) & IEEE80211_SCTL_FRAG)); + + if (i == num_fragm - 2) { + /* clear MOREFRAGS bit for the last fragment */ + fhdr->frame_control &= cpu_to_le16(~IEEE80211_FCTL_MOREFRAGS); + } else { + /* + * No multi-rate retries for fragmented frames, that + * would completely throw off the NAV at other STAs. + */ + info->control.rates[1].idx = -1; + info->control.rates[2].idx = -1; + info->control.rates[3].idx = -1; + info->control.rates[4].idx = -1; + BUILD_BUG_ON(IEEE80211_TX_MAX_RATES != 5); + info->flags &= ~IEEE80211_TX_CTL_RATE_CTRL_PROBE; + } + + /* copy data */ copylen = left > per_fragm ? per_fragm : left; memcpy(skb_put(frag, copylen), pos, copylen); - memcpy(frag->cb, first->cb, sizeof(frag->cb)); + skb_copy_queue_mapping(frag, first); + frag->do_not_encrypt = first->do_not_encrypt; pos += copylen; @@ -765,12 +812,10 @@ ieee80211_tx_h_calculate_duration(struct ieee80211_tx_data *tx) tx->extra_frag[0]->len); for (i = 0; i < tx->num_extra_frag; i++) { - if (i + 1 < tx->num_extra_frag) { + if (i + 1 < tx->num_extra_frag) next_len = tx->extra_frag[i + 1]->len; - } else { + else next_len = 0; - tx->rate_idx = tx->last_frag_rate_idx; - } hdr = (struct ieee80211_hdr *)tx->extra_frag[i]->data; hdr->duration_id = ieee80211_duration(tx, 0, next_len); @@ -823,7 +868,6 @@ __ieee80211_parse_tx_radiotap(struct ieee80211_tx_data *tx, (struct ieee80211_radiotap_header *) skb->data; struct ieee80211_supported_band *sband; int ret = ieee80211_radiotap_iterator_init(&iterator, rthdr, skb->len); - struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb); sband = tx->local->hw.wiphy->bands[tx->channel->band]; @@ -837,8 +881,6 @@ __ieee80211_parse_tx_radiotap(struct ieee80211_tx_data *tx, */ while (!ret) { - int i, target_rate; - ret = ieee80211_radiotap_iterator_next(&iterator); if (ret) @@ -852,38 +894,6 @@ __ieee80211_parse_tx_radiotap(struct ieee80211_tx_data *tx, * get_unaligned((type *)iterator.this_arg) to dereference * iterator.this_arg for type "type" safely on all arches. */ - case IEEE80211_RADIOTAP_RATE: - /* - * radiotap rate u8 is in 500kbps units eg, 0x02=1Mbps - * ieee80211 rate int is in 100kbps units eg, 0x0a=1Mbps - */ - target_rate = (*iterator.this_arg) * 5; - for (i = 0; i < sband->n_bitrates; i++) { - struct ieee80211_rate *r; - - r = &sband->bitrates[i]; - - if (r->bitrate == target_rate) { - tx->rate_idx = i; - break; - } - } - break; - - case IEEE80211_RADIOTAP_ANTENNA: - /* - * radiotap uses 0 for 1st ant, mac80211 is 1 for - * 1st ant - */ - info->antenna_sel_tx = (*iterator.this_arg) + 1; - break; - -#if 0 - case IEEE80211_RADIOTAP_DBM_TX_POWER: - control->power_level = *iterator.this_arg; - break; -#endif - case IEEE80211_RADIOTAP_FLAGS: if (*iterator.this_arg & IEEE80211_RADIOTAP_F_FCS) { /* @@ -949,8 +959,6 @@ __ieee80211_tx_prepare(struct ieee80211_tx_data *tx, tx->local = local; tx->sdata = IEEE80211_DEV_TO_SUB_IF(dev); tx->channel = local->hw.conf.channel; - tx->rate_idx = -1; - tx->last_frag_rate_idx = -1; /* * Set this flag (used below to indicate "automatic fragmentation"), * it will be cleared/left by radiotap as desired. @@ -1051,23 +1059,11 @@ static int __ieee80211_tx(struct ieee80211_local *local, struct sk_buff *skb, if (!tx->extra_frag[i]) continue; info = IEEE80211_SKB_CB(tx->extra_frag[i]); - info->flags &= ~(IEEE80211_TX_CTL_USE_RTS_CTS | - IEEE80211_TX_CTL_USE_CTS_PROTECT | - IEEE80211_TX_CTL_CLEAR_PS_FILT | + info->flags &= ~(IEEE80211_TX_CTL_CLEAR_PS_FILT | IEEE80211_TX_CTL_FIRST_FRAGMENT); if (netif_subqueue_stopped(local->mdev, tx->extra_frag[i])) return IEEE80211_TX_FRAG_AGAIN; - if (i == tx->num_extra_frag) { - info->tx_rate_idx = tx->last_frag_rate_idx; - - if (tx->flags & IEEE80211_TX_PROBE_LAST_FRAG) - info->flags |= - IEEE80211_TX_CTL_RATE_CTRL_PROBE; - else - info->flags &= - ~IEEE80211_TX_CTL_RATE_CTRL_PROBE; - } ret = local->ops->tx(local_to_hw(local), tx->extra_frag[i]); @@ -1204,9 +1200,6 @@ retry: store->skb = skb; store->extra_frag = tx.extra_frag; store->num_extra_frag = tx.num_extra_frag; - store->last_frag_rate_idx = tx.last_frag_rate_idx; - store->last_frag_rate_ctrl_probe = - !!(tx.flags & IEEE80211_TX_PROBE_LAST_FRAG); } out: rcu_read_unlock(); @@ -1763,10 +1756,7 @@ void ieee80211_tx_pending(unsigned long data) store = &local->pending_packet[i]; tx.extra_frag = store->extra_frag; tx.num_extra_frag = store->num_extra_frag; - tx.last_frag_rate_idx = store->last_frag_rate_idx; tx.flags = 0; - if (store->last_frag_rate_ctrl_probe) - tx.flags |= IEEE80211_TX_PROBE_LAST_FRAG; ret = __ieee80211_tx(local, store->skb, &tx); if (ret) { if (ret == IEEE80211_TX_FRAG_AGAIN) @@ -1854,7 +1844,6 @@ struct sk_buff *ieee80211_beacon_get(struct ieee80211_hw *hw, struct ieee80211_sub_if_data *sdata = NULL; struct ieee80211_if_ap *ap = NULL; struct ieee80211_if_sta *ifsta = NULL; - struct rate_selection rsel; struct beacon_data *beacon; struct ieee80211_supported_band *sband; enum ieee80211_band band = local->hw.conf.channel->band; @@ -1958,32 +1947,23 @@ struct sk_buff *ieee80211_beacon_get(struct ieee80211_hw *hw, skb->do_not_encrypt = 1; info->band = band; - rate_control_get_rate(sdata, sband, NULL, skb, &rsel); - - if (unlikely(rsel.rate_idx < 0)) { - if (net_ratelimit()) { - printk(KERN_DEBUG "%s: ieee80211_beacon_get: " - "no rate found\n", - wiphy_name(local->hw.wiphy)); - } - dev_kfree_skb_any(skb); - skb = NULL; - goto out; - } + /* + * XXX: For now, always use the lowest rate + */ + info->control.rates[0].idx = 0; + info->control.rates[0].count = 1; + info->control.rates[1].idx = -1; + info->control.rates[2].idx = -1; + info->control.rates[3].idx = -1; + info->control.rates[4].idx = -1; + BUILD_BUG_ON(IEEE80211_TX_MAX_RATES != 5); info->control.vif = vif; - info->tx_rate_idx = rsel.rate_idx; info->flags |= IEEE80211_TX_CTL_NO_ACK; info->flags |= IEEE80211_TX_CTL_CLEAR_PS_FILT; info->flags |= IEEE80211_TX_CTL_ASSIGN_SEQ; - if (sdata->vif.bss_conf.use_short_preamble && - sband->bitrates[rsel.rate_idx].flags & IEEE80211_RATE_SHORT_PREAMBLE) - info->flags |= IEEE80211_TX_CTL_SHORT_PREAMBLE; - - info->control.retry_limit = 1; - -out: + out: rcu_read_unlock(); return skb; } diff --git a/net/mac80211/wext.c b/net/mac80211/wext.c index f7e442f80a1..31d2e74a1bc 100644 --- a/net/mac80211/wext.c +++ b/net/mac80211/wext.c @@ -636,8 +636,8 @@ static int ieee80211_ioctl_giwrate(struct net_device *dev, sta = sta_info_get(local, sdata->u.sta.bssid); - if (sta && sta->last_txrate_idx < sband->n_bitrates) - rate->value = sband->bitrates[sta->last_txrate_idx].bitrate; + if (sta && !(sta->last_tx_rate.flags & IEEE80211_TX_RC_MCS)) + rate->value = sband->bitrates[sta->last_tx_rate.idx].bitrate; else rate->value = 0; -- cgit v1.2.3-70-g09d2 From be3d48106c1e5d075784e5e67928a6b5ffc0f3b6 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Fri, 24 Oct 2008 20:32:21 +0200 Subject: wireless: remove struct regdom hinting The code needs to be split out and cleaned up, so as a first step remove the capability, to add it back in a subsequent patch as a separate function. Also remove the publically facing return value of the function and the wiphy argument. A number of internal functions go from being generic helpers to just being used for alpha2 setting. Signed-off-by: Johannes Berg Signed-off-by: John W. Linville --- Documentation/networking/regulatory.txt | 11 +++--- drivers/net/wireless/zd1211rw/zd_mac.c | 2 +- include/net/wireless.h | 23 +++--------- net/wireless/nl80211.c | 2 +- net/wireless/reg.c | 63 +++++++++------------------------ net/wireless/reg.h | 23 ++++-------- 6 files changed, 36 insertions(+), 88 deletions(-) (limited to 'drivers/net/wireless/zd1211rw/zd_mac.c') diff --git a/Documentation/networking/regulatory.txt b/Documentation/networking/regulatory.txt index 357d4ba4f13..dcf31648414 100644 --- a/Documentation/networking/regulatory.txt +++ b/Documentation/networking/regulatory.txt @@ -131,11 +131,13 @@ are expected to do this during initialization. r = zd_reg2alpha2(mac->regdomain, alpha2); if (!r) - regulatory_hint(hw->wiphy, alpha2, NULL); + regulatory_hint(hw->wiphy, alpha2); Example code - drivers providing a built in regulatory domain: -------------------------------------------------------------- +[NOTE: This API is not currently available, it can be added when required] + If you have regulatory information you can obtain from your driver and you *need* to use this we let you build a regulatory domain structure and pass it to the wireless core. To do this you should @@ -182,6 +184,7 @@ Then in some part of your code after your wiphy has been registered: memcpy(rd, &mydriver_jp_regdom, sizeof(struct ieee80211_regdomain)); for (i=0; i < num_rules; i++) - memcpy(&rd->reg_rules[i], &mydriver_jp_regdom.reg_rules[i], - sizeof(struct ieee80211_reg_rule)); - return regulatory_hint(hw->wiphy, NULL, rd); + memcpy(&rd->reg_rules[i], + &mydriver_jp_regdom.reg_rules[i], + sizeof(struct ieee80211_reg_rule)); + regulatory_struct_hint(rd); diff --git a/drivers/net/wireless/zd1211rw/zd_mac.c b/drivers/net/wireless/zd1211rw/zd_mac.c index 2f0802b29c4..07513e48b8f 100644 --- a/drivers/net/wireless/zd1211rw/zd_mac.c +++ b/drivers/net/wireless/zd1211rw/zd_mac.c @@ -171,7 +171,7 @@ int zd_mac_init_hw(struct ieee80211_hw *hw) r = zd_reg2alpha2(mac->regdomain, alpha2); if (!r) - regulatory_hint(hw->wiphy, alpha2, NULL); + regulatory_hint(hw->wiphy, alpha2); r = 0; disable_int: diff --git a/include/net/wireless.h b/include/net/wireless.h index 6e3ea015904..41294c5f6f8 100644 --- a/include/net/wireless.h +++ b/include/net/wireless.h @@ -342,34 +342,19 @@ ieee80211_get_channel(struct wiphy *wiphy, int freq) /** * regulatory_hint - driver hint to the wireless core a regulatory domain - * @wiphy: the driver's very own &struct wiphy + * @wiphy: the wireless device giving the hint (used only for reporting + * conflicts) * @alpha2: the ISO/IEC 3166 alpha2 the driver claims its regulatory domain * should be in. If @rd is set this should be NULL. Note that if you * set this to NULL you should still set rd->alpha2 to some accepted * alpha2. - * @rd: a complete regulatory domain provided by the driver. If passed - * the driver does not need to worry about freeing it. * * Wireless drivers can use this function to hint to the wireless core * what it believes should be the current regulatory domain by * giving it an ISO/IEC 3166 alpha2 country code it knows its regulatory * domain should be in or by providing a completely build regulatory domain. * If the driver provides an ISO/IEC 3166 alpha2 userspace will be queried - * for a regulatory domain structure for the respective country. If - * a regulatory domain is build and passed you should set the alpha2 - * if possible, otherwise set it to the special value of "99" which tells - * the wireless core it is unknown. - * - * Returns -EALREADY if *a regulatory domain* has already been set. Note that - * this could be by another driver. It is safe for drivers to continue if - * -EALREADY is returned, if drivers are not capable of world roaming they - * should not register more channels than they support. Right now we only - * support listening to the first driver hint. If the driver is capable - * of world roaming but wants to respect its own EEPROM mappings for - * specific regulatory domains it should register the @reg_notifier callback - * on the &struct wiphy. Returns 0 if the hint went through fine or through an - * intersection operation. Otherwise a standard error code is returned. + * for a regulatory domain structure for the respective country. */ -extern int regulatory_hint(struct wiphy *wiphy, - const char *alpha2, struct ieee80211_regdomain *rd); +extern void regulatory_hint(struct wiphy *wiphy, const char *alpha2); #endif /* __NET_WIRELESS_H */ diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c index f82cc9aa690..5e1d658a8b5 100644 --- a/net/wireless/nl80211.c +++ b/net/wireless/nl80211.c @@ -1695,7 +1695,7 @@ static int nl80211_req_set_reg(struct sk_buff *skb, struct genl_info *info) return -EINVAL; #endif mutex_lock(&cfg80211_drv_mutex); - r = __regulatory_hint(NULL, REGDOM_SET_BY_USER, data, NULL); + r = __regulatory_hint(NULL, REGDOM_SET_BY_USER, data); mutex_unlock(&cfg80211_drv_mutex); return r; } diff --git a/net/wireless/reg.c b/net/wireless/reg.c index 038f8f133c5..dc10071deaa 100644 --- a/net/wireless/reg.c +++ b/net/wireless/reg.c @@ -42,7 +42,10 @@ #include "core.h" #include "reg.h" -/* wiphy is set if this request's initiator is REGDOM_SET_BY_DRIVER */ +/* + * wiphy is set if this request's initiator is + * REGDOM_SET_BY_COUNTRY_IE or _DRIVER + */ struct regulatory_request { struct wiphy *wiphy; enum reg_set_by initiator; @@ -298,7 +301,7 @@ static int call_crda(const char *alpha2) /* This has the logic which determines when a new request * should be ignored. */ static int ignore_request(struct wiphy *wiphy, enum reg_set_by set_by, - char *alpha2, struct ieee80211_regdomain *rd) + const char *alpha2) { /* All initial requests are respected */ if (!last_request) @@ -343,22 +346,8 @@ static int ignore_request(struct wiphy *wiphy, enum reg_set_by set_by, return 1; case REGDOM_SET_BY_DRIVER: BUG_ON(!wiphy); - if (last_request->initiator == REGDOM_SET_BY_DRIVER) { - /* Two separate drivers hinting different things, - * this is possible if you have two devices present - * on a system with different EEPROM regulatory - * readings. XXX: Do intersection, we support only - * the first regulatory hint for now */ - if (last_request->wiphy != wiphy) - return -EALREADY; - if (rd) - return -EALREADY; - /* Driver should not be trying to hint different - * regulatory domains! */ - BUG_ON(!alpha2_equal(alpha2, - cfg80211_regdomain->alpha2)); + if (last_request->initiator == REGDOM_SET_BY_DRIVER) return -EALREADY; - } if (last_request->initiator == REGDOM_SET_BY_CORE) return 0; /* XXX: Handle intersection, and add the @@ -557,40 +546,32 @@ void wiphy_update_regulatory(struct wiphy *wiphy, enum reg_set_by setby) /* Caller must hold &cfg80211_drv_mutex */ int __regulatory_hint(struct wiphy *wiphy, enum reg_set_by set_by, - const char *alpha2, struct ieee80211_regdomain *rd) + const char *alpha2) { struct regulatory_request *request; - char *rd_alpha2; int r = 0; - r = ignore_request(wiphy, set_by, (char *) alpha2, rd); + r = ignore_request(wiphy, set_by, alpha2); if (r) return r; - if (rd) - rd_alpha2 = rd->alpha2; - else - rd_alpha2 = (char *) alpha2; - switch (set_by) { case REGDOM_SET_BY_CORE: case REGDOM_SET_BY_COUNTRY_IE: case REGDOM_SET_BY_DRIVER: case REGDOM_SET_BY_USER: request = kzalloc(sizeof(struct regulatory_request), - GFP_KERNEL); + GFP_KERNEL); if (!request) return -ENOMEM; - request->alpha2[0] = rd_alpha2[0]; - request->alpha2[1] = rd_alpha2[1]; + request->alpha2[0] = alpha2[0]; + request->alpha2[1] = alpha2[1]; request->initiator = set_by; request->wiphy = wiphy; kfree(last_request); last_request = request; - if (rd) - break; r = call_crda(alpha2); #ifndef CONFIG_WIRELESS_OLD_REGULATORY if (r) @@ -605,25 +586,13 @@ int __regulatory_hint(struct wiphy *wiphy, enum reg_set_by set_by, return r; } -int regulatory_hint(struct wiphy *wiphy, const char *alpha2, - struct ieee80211_regdomain *rd) +void regulatory_hint(struct wiphy *wiphy, const char *alpha2) { - int r; - BUG_ON(!rd && !alpha2); + BUG_ON(!alpha2); mutex_lock(&cfg80211_drv_mutex); - - r = __regulatory_hint(wiphy, REGDOM_SET_BY_DRIVER, alpha2, rd); - if (r || !rd) - goto unlock_and_exit; - - /* If the driver passed a regulatory domain we skipped asking - * userspace for one so we can now go ahead and set it */ - r = set_regdom(rd); - -unlock_and_exit: + __regulatory_hint(wiphy, REGDOM_SET_BY_DRIVER, alpha2); mutex_unlock(&cfg80211_drv_mutex); - return r; } EXPORT_SYMBOL(regulatory_hint); @@ -792,11 +761,11 @@ int regulatory_init(void) * that is not a valid ISO / IEC 3166 alpha2 */ if (ieee80211_regdom[0] != 'E' || ieee80211_regdom[1] != 'U') err = __regulatory_hint(NULL, REGDOM_SET_BY_CORE, - ieee80211_regdom, NULL); + ieee80211_regdom); #else cfg80211_regdomain = cfg80211_world_regdom; - err = __regulatory_hint(NULL, REGDOM_SET_BY_CORE, "00", NULL); + err = __regulatory_hint(NULL, REGDOM_SET_BY_CORE, "00"); if (err) printk(KERN_ERR "cfg80211: calling CRDA failed - " "unable to update world regulatory domain, " diff --git a/net/wireless/reg.h b/net/wireless/reg.h index 0c1572b92fe..c9b6b6358bb 100644 --- a/net/wireless/reg.h +++ b/net/wireless/reg.h @@ -11,30 +11,21 @@ int set_regdom(const struct ieee80211_regdomain *rd); /** * __regulatory_hint - hint to the wireless core a regulatory domain - * @wiphy: if a driver is providing the hint this is the driver's very - * own &struct wiphy + * @wiphy: if the hint comes from country information from an AP, this + * is required to be set to the wiphy that received the information * @alpha2: the ISO/IEC 3166 alpha2 being claimed the regulatory domain - * should be in. If @rd is set this should be NULL - * @rd: a complete regulatory domain, if passed the caller need not worry - * about freeing it + * should be in. * * The Wireless subsystem can use this function to hint to the wireless core * what it believes should be the current regulatory domain by * giving it an ISO/IEC 3166 alpha2 country code it knows its regulatory - * domain should be in or by providing a completely build regulatory domain. + * domain should be in. * - * Returns -EALREADY if *a regulatory domain* has already been set. Note that - * this could be by another driver. It is safe for drivers to continue if - * -EALREADY is returned, if drivers are not capable of world roaming they - * should not register more channels than they support. Right now we only - * support listening to the first driver hint. If the driver is capable - * of world roaming but wants to respect its own EEPROM mappings for - * specific regulatory domains it should register the @reg_notifier callback - * on the &struct wiphy. Returns 0 if the hint went through fine or through an - * intersection operation. Otherwise a standard error code is returned. + * Returns zero if all went fine, %-EALREADY if a regulatory domain had + * already been set or other standard error codes. * */ extern int __regulatory_hint(struct wiphy *wiphy, enum reg_set_by set_by, - const char *alpha2, struct ieee80211_regdomain *rd); + const char *alpha2); #endif /* __NET_WIRELESS_REG_H */ -- cgit v1.2.3-70-g09d2 From cde6901b7b69557a6f90f3183f76eda581af015e Mon Sep 17 00:00:00 2001 From: Shaddy Baddah Date: Fri, 28 Nov 2008 17:10:45 +1100 Subject: zd1211rw: use unaligned safe memcmp() in-place of compare_ether_addr() Under my 2.6.28-rc6 sparc64, when associating to an AP through my zd1211rw device, I was seeing kernel log messages like (not exact output): Kernel unaligned access at TPC[10129b68] zd_mac_rx+0x144/0x32c [zd1211rw] For the zd1211rw module, on RX, the 80211 packet will be located after the PLCP header in the skb data buffer. The PLCP header being 5 bytes long, the 80211 header will start unaligned from an aligned skb buffer. As per Documentation/unaligned-memory-access.txt, we must replace the not unaligned() safe compare_ether_addr() with memcmp() to protect architectures that require alignment. Signed-off-by: Shaddy Baddah Signed-off-by: John W. Linville --- drivers/net/wireless/zd1211rw/zd_mac.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/net/wireless/zd1211rw/zd_mac.c') diff --git a/drivers/net/wireless/zd1211rw/zd_mac.c b/drivers/net/wireless/zd1211rw/zd_mac.c index fe1867b25ff..cac732f4047 100644 --- a/drivers/net/wireless/zd1211rw/zd_mac.c +++ b/drivers/net/wireless/zd1211rw/zd_mac.c @@ -615,7 +615,7 @@ static int filter_ack(struct ieee80211_hw *hw, struct ieee80211_hdr *rx_hdr, struct ieee80211_hdr *tx_hdr; tx_hdr = (struct ieee80211_hdr *)skb->data; - if (likely(!compare_ether_addr(tx_hdr->addr2, rx_hdr->addr1))) + if (likely(!memcmp(tx_hdr->addr2, rx_hdr->addr1, ETH_ALEN))) { __skb_unlink(skb, q); tx_status(hw, skb, IEEE80211_TX_STAT_ACK, stats->signal, 1); -- cgit v1.2.3-70-g09d2