From f3926b49b7122f66f8f2a1da4ae3275b112ab3e7 Mon Sep 17 00:00:00 2001
From: Christian Lamparter <chunkeey@googlemail.com>
Date: Sat, 1 May 2010 18:18:18 +0200
Subject: ar9170usb: remove deprecated aggregation code

This patch removes the incomplete AMPDU implementation in ar9170usb.

The code in question is:
 * too big and complex (more than 550 SLOC.)
   This is enough to qualify for a new separate code file!

 * unbalanced quantity & quality
	over-engineered areas like:
		* xmit scheduling and queuing frames for multiple HT peers
		* redundant frame sorting
	are confronted by gaping holes:
		* accurate transmission feedback
		* firmware error-handling and device reset
		* HT rate control algorithm

 * error-prone
	Since its inclusion, hardly anything was done to fix
	any of the outlined flaws from the initial commit message.

   => This also indicates poor maintainability.

 * relies heavily on several spinlocks.

As a result of this shortcomings, the code is slow and does not
even support the most basic 11n requirement: HT station mode.

Therefore, I request to purge my heap of **** from the kernel:
"ar9170: implement transmit aggregation".

The next item on the agenda is: (re-)start from scratch with
an adequate design to accommodate the special requirements
and features of the available frameworks and tools.

Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/ath/ar9170/ar9170.h |  52 +--
 drivers/net/wireless/ath/ar9170/main.c   | 558 +------------------------------
 2 files changed, 12 insertions(+), 598 deletions(-)

(limited to 'drivers/net/wireless')

diff --git a/drivers/net/wireless/ath/ar9170/ar9170.h b/drivers/net/wireless/ath/ar9170/ar9170.h
index dc662b76a1c..4f845f80c09 100644
--- a/drivers/net/wireless/ath/ar9170/ar9170.h
+++ b/drivers/net/wireless/ath/ar9170/ar9170.h
@@ -109,41 +109,6 @@ struct ar9170_rxstream_mpdu_merge {
 	bool has_plcp;
 };
 
-#define AR9170_NUM_TID	16
-#define WME_BA_BMP_SIZE         64
-#define AR9170_NUM_MAX_AGG_LEN	(2 * WME_BA_BMP_SIZE)
-
-#define WME_AC_BE   2
-#define WME_AC_BK   3
-#define WME_AC_VI   1
-#define WME_AC_VO   0
-
-#define TID_TO_WME_AC(_tid)				\
-	((((_tid) == 0) || ((_tid) == 3)) ? WME_AC_BE :	\
-	 (((_tid) == 1) || ((_tid) == 2)) ? WME_AC_BK :	\
-	 (((_tid) == 4) || ((_tid) == 5)) ? WME_AC_VI :	\
-	 WME_AC_VO)
-
-#define BAW_WITHIN(_start, _bawsz, _seqno) \
-	((((_seqno) - (_start)) & 0xfff) < (_bawsz))
-
-enum ar9170_tid_state {
-	AR9170_TID_STATE_INVALID,
-	AR9170_TID_STATE_SHUTDOWN,
-	AR9170_TID_STATE_PROGRESS,
-	AR9170_TID_STATE_COMPLETE,
-};
-
-struct ar9170_sta_tid {
-	struct list_head list;
-	struct sk_buff_head queue;
-	u8 addr[ETH_ALEN];
-	u16 ssn;
-	u16 tid;
-	enum ar9170_tid_state state;
-	bool active;
-};
-
 struct ar9170_tx_queue_stats {
 	unsigned int len;
 	unsigned int limit;
@@ -152,14 +117,11 @@ struct ar9170_tx_queue_stats {
 
 #define AR9170_QUEUE_TIMEOUT		64
 #define AR9170_TX_TIMEOUT		8
-#define AR9170_BA_TIMEOUT		4
 #define AR9170_JANITOR_DELAY		128
 #define AR9170_TX_INVALID_RATE		0xffffffff
 
-#define AR9170_NUM_TX_STATUS		128
-#define AR9170_NUM_TX_AGG_MAX		30
-#define AR9170_NUM_TX_LIMIT_HARD       AR9170_TXQ_DEPTH
-#define AR9170_NUM_TX_LIMIT_SOFT       (AR9170_TXQ_DEPTH - 10)
+#define AR9170_NUM_TX_LIMIT_HARD	AR9170_TXQ_DEPTH
+#define AR9170_NUM_TX_LIMIT_SOFT	(AR9170_TXQ_DEPTH - 10)
 
 struct ar9170 {
 	struct ieee80211_hw *hw;
@@ -234,11 +196,6 @@ struct ar9170 {
 	struct sk_buff_head tx_pending[__AR9170_NUM_TXQ];
 	struct sk_buff_head tx_status[__AR9170_NUM_TXQ];
 	struct delayed_work tx_janitor;
-	/* tx ampdu */
-	struct sk_buff_head tx_status_ampdu;
-	spinlock_t tx_ampdu_list_lock;
-	struct list_head tx_ampdu_list;
-	atomic_t tx_ampdu_pending;
 
 	/* rxstream mpdu merge */
 	struct ar9170_rxstream_mpdu_merge rx_mpdu;
@@ -250,11 +207,6 @@ struct ar9170 {
 	u8 global_ampdu_factor;
 };
 
-struct ar9170_sta_info {
-	struct ar9170_sta_tid agg[AR9170_NUM_TID];
-	unsigned int ampdu_max_len;
-};
-
 struct ar9170_tx_info {
 	unsigned long timeout;
 };
diff --git a/drivers/net/wireless/ath/ar9170/main.c b/drivers/net/wireless/ath/ar9170/main.c
index dfcc055a827..b0654c87330 100644
--- a/drivers/net/wireless/ath/ar9170/main.c
+++ b/drivers/net/wireless/ath/ar9170/main.c
@@ -49,10 +49,6 @@ static int modparam_nohwcrypt;
 module_param_named(nohwcrypt, modparam_nohwcrypt, bool, S_IRUGO);
 MODULE_PARM_DESC(nohwcrypt, "Disable hardware encryption.");
 
-static int modparam_ht;
-module_param_named(ht, modparam_ht, bool, S_IRUGO);
-MODULE_PARM_DESC(ht, "enable MPDU aggregation.");
-
 #define RATE(_bitrate, _hw_rate, _txpidx, _flags) {	\
 	.bitrate	= (_bitrate),			\
 	.flags		= (_flags),			\
@@ -181,7 +177,6 @@ static struct ieee80211_supported_band ar9170_band_5GHz = {
 };
 
 static void ar9170_tx(struct ar9170 *ar);
-static bool ar9170_tx_ampdu(struct ar9170 *ar);
 
 static inline u16 ar9170_get_seq_h(struct ieee80211_hdr *hdr)
 {
@@ -194,21 +189,7 @@ static inline u16 ar9170_get_seq(struct sk_buff *skb)
 	return ar9170_get_seq_h((void *) txc->frame_data);
 }
 
-static inline u16 ar9170_get_tid_h(struct ieee80211_hdr *hdr)
-{
-	return (ieee80211_get_qos_ctl(hdr))[0] & IEEE80211_QOS_CTL_TID_MASK;
-}
-
-static inline u16 ar9170_get_tid(struct sk_buff *skb)
-{
-	struct ar9170_tx_control *txc = (void *) skb->data;
-	return ar9170_get_tid_h((struct ieee80211_hdr *) txc->frame_data);
-}
-
-#define GET_NEXT_SEQ(seq)	((seq + 1) & 0x0fff)
-#define GET_NEXT_SEQ_FROM_SKB(skb)	(GET_NEXT_SEQ(ar9170_get_seq(skb)))
-
-#if (defined AR9170_QUEUE_DEBUG) || (defined AR9170_TXAGG_DEBUG)
+#ifdef AR9170_QUEUE_DEBUG
 static void ar9170_print_txheader(struct ar9170 *ar, struct sk_buff *skb)
 {
 	struct ar9170_tx_control *txc = (void *) skb->data;
@@ -243,7 +224,7 @@ static void __ar9170_dump_txqueue(struct ar9170 *ar,
 		       "mismatch %d != %d\n", skb_queue_len(queue), i);
 	printk(KERN_DEBUG "---[ end ]---\n");
 }
-#endif /* AR9170_QUEUE_DEBUG || AR9170_TXAGG_DEBUG */
+#endif /* AR9170_QUEUE_DEBUG */
 
 #ifdef AR9170_QUEUE_DEBUG
 static void ar9170_dump_txqueue(struct ar9170 *ar,
@@ -274,20 +255,6 @@ static void __ar9170_dump_txstats(struct ar9170 *ar)
 }
 #endif /* AR9170_QUEUE_STOP_DEBUG */
 
-#ifdef AR9170_TXAGG_DEBUG
-static void ar9170_dump_tx_status_ampdu(struct ar9170 *ar)
-{
-	unsigned long flags;
-
-	spin_lock_irqsave(&ar->tx_status_ampdu.lock, flags);
-	printk(KERN_DEBUG "%s: A-MPDU tx_status queue =>\n",
-	       wiphy_name(ar->hw->wiphy));
-	__ar9170_dump_txqueue(ar, &ar->tx_status_ampdu);
-	spin_unlock_irqrestore(&ar->tx_status_ampdu.lock, flags);
-}
-
-#endif /* AR9170_TXAGG_DEBUG */
-
 /* caller must guarantee exclusive access for _bin_ queue. */
 static void ar9170_recycle_expired(struct ar9170 *ar,
 				   struct sk_buff_head *queue,
@@ -359,70 +326,6 @@ static void ar9170_tx_status(struct ar9170 *ar, struct sk_buff *skb,
 	ieee80211_tx_status_irqsafe(ar->hw, skb);
 }
 
-static void ar9170_tx_fake_ampdu_status(struct ar9170 *ar)
-{
-	struct sk_buff_head success;
-	struct sk_buff *skb;
-	unsigned int i;
-	unsigned long queue_bitmap = 0;
-
-	skb_queue_head_init(&success);
-
-	while (skb_queue_len(&ar->tx_status_ampdu) > AR9170_NUM_TX_STATUS)
-		__skb_queue_tail(&success, skb_dequeue(&ar->tx_status_ampdu));
-
-	ar9170_recycle_expired(ar, &ar->tx_status_ampdu, &success);
-
-#ifdef AR9170_TXAGG_DEBUG
-	printk(KERN_DEBUG "%s: collected %d A-MPDU frames.\n",
-	       wiphy_name(ar->hw->wiphy), skb_queue_len(&success));
-	__ar9170_dump_txqueue(ar, &success);
-#endif /* AR9170_TXAGG_DEBUG */
-
-	while ((skb = __skb_dequeue(&success))) {
-		struct ieee80211_tx_info *txinfo;
-
-		queue_bitmap |= BIT(skb_get_queue_mapping(skb));
-
-		txinfo = IEEE80211_SKB_CB(skb);
-		ieee80211_tx_info_clear_status(txinfo);
-
-		txinfo->flags |= IEEE80211_TX_STAT_ACK;
-		txinfo->status.rates[0].count = 1;
-
-		skb_pull(skb, sizeof(struct ar9170_tx_control));
-		ieee80211_tx_status_irqsafe(ar->hw, skb);
-	}
-
-	for_each_bit(i, &queue_bitmap, BITS_PER_BYTE) {
-#ifdef AR9170_QUEUE_STOP_DEBUG
-		printk(KERN_DEBUG "%s: wake queue %d\n",
-		       wiphy_name(ar->hw->wiphy), i);
-		__ar9170_dump_txstats(ar);
-#endif /* AR9170_QUEUE_STOP_DEBUG */
-		ieee80211_wake_queue(ar->hw, i);
-	}
-
-	if (queue_bitmap)
-		ar9170_tx(ar);
-}
-
-static void ar9170_tx_ampdu_callback(struct ar9170 *ar, struct sk_buff *skb)
-{
-	struct ieee80211_tx_info *txinfo = IEEE80211_SKB_CB(skb);
-	struct ar9170_tx_info *arinfo = (void *) txinfo->rate_driver_data;
-
-	arinfo->timeout = jiffies +
-			  msecs_to_jiffies(AR9170_BA_TIMEOUT);
-
-	skb_queue_tail(&ar->tx_status_ampdu, skb);
-	ar9170_tx_fake_ampdu_status(ar);
-
-	if (atomic_dec_and_test(&ar->tx_ampdu_pending) &&
-	    !list_empty(&ar->tx_ampdu_list))
-		ar9170_tx_ampdu(ar);
-}
-
 void ar9170_tx_callback(struct ar9170 *ar, struct sk_buff *skb)
 {
 	struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
@@ -446,14 +349,10 @@ void ar9170_tx_callback(struct ar9170 *ar, struct sk_buff *skb)
 	if (info->flags & IEEE80211_TX_CTL_NO_ACK) {
 		ar9170_tx_status(ar, skb, AR9170_TX_STATUS_FAILED);
 	} else {
-		if (info->flags & IEEE80211_TX_CTL_AMPDU) {
-			ar9170_tx_ampdu_callback(ar, skb);
-		} else {
-			arinfo->timeout = jiffies +
-				  msecs_to_jiffies(AR9170_TX_TIMEOUT);
+		arinfo->timeout = jiffies +
+			  msecs_to_jiffies(AR9170_TX_TIMEOUT);
 
-			skb_queue_tail(&ar->tx_status[queue], skb);
-		}
+		skb_queue_tail(&ar->tx_status[queue], skb);
 	}
 
 	if (!ar->tx_stats[queue].len &&
@@ -523,38 +422,6 @@ static struct sk_buff *ar9170_get_queued_skb(struct ar9170 *ar,
 	return NULL;
 }
 
-static void ar9170_handle_block_ack(struct ar9170 *ar, u16 count, u16 r)
-{
-	struct sk_buff *skb;
-	struct ieee80211_tx_info *txinfo;
-
-	while (count) {
-		skb = ar9170_get_queued_skb(ar, NULL, &ar->tx_status_ampdu, r);
-		if (!skb)
-			break;
-
-		txinfo = IEEE80211_SKB_CB(skb);
-		ieee80211_tx_info_clear_status(txinfo);
-
-		/* FIXME: maybe more ? */
-		txinfo->status.rates[0].count = 1;
-
-		skb_pull(skb, sizeof(struct ar9170_tx_control));
-		ieee80211_tx_status_irqsafe(ar->hw, skb);
-		count--;
-	}
-
-#ifdef AR9170_TXAGG_DEBUG
-	if (count) {
-		printk(KERN_DEBUG "%s: got %d more failed mpdus, but no more "
-		       "suitable frames left in tx_status queue.\n",
-		       wiphy_name(ar->hw->wiphy), count);
-
-		ar9170_dump_tx_status_ampdu(ar);
-	}
-#endif /* AR9170_TXAGG_DEBUG */
-}
-
 /*
  * This worker tries to keeps an maintain tx_status queues.
  * So we can guarantee that incoming tx_status reports are
@@ -591,8 +458,6 @@ static void ar9170_tx_janitor(struct work_struct *work)
 			resched = true;
 	}
 
-	ar9170_tx_fake_ampdu_status(ar);
-
 	if (!resched)
 		return;
 
@@ -672,10 +537,6 @@ void ar9170_handle_command_response(struct ar9170 *ar, void *buf, u32 len)
 
 	case 0xc5:
 		/* BlockACK events */
-		ar9170_handle_block_ack(ar,
-					le16_to_cpu(cmd->ba_fail_cnt.failed),
-					le16_to_cpu(cmd->ba_fail_cnt.rate));
-		ar9170_tx_fake_ampdu_status(ar);
 		break;
 
 	case 0xc6:
@@ -1246,7 +1107,6 @@ static int ar9170_op_start(struct ieee80211_hw *hw)
 	ar->global_ampdu_density = 6;
 	ar->global_ampdu_factor = 3;
 
-	atomic_set(&ar->tx_ampdu_pending, 0);
 	ar->bad_hw_nagger = jiffies;
 
 	err = ar->open(ar);
@@ -1309,40 +1169,10 @@ static void ar9170_op_stop(struct ieee80211_hw *hw)
 		skb_queue_purge(&ar->tx_pending[i]);
 		skb_queue_purge(&ar->tx_status[i]);
 	}
-	skb_queue_purge(&ar->tx_status_ampdu);
 
 	mutex_unlock(&ar->mutex);
 }
 
-static void ar9170_tx_indicate_immba(struct ar9170 *ar, struct sk_buff *skb)
-{
-	struct ar9170_tx_control *txc = (void *) skb->data;
-
-	txc->mac_control |= cpu_to_le16(AR9170_TX_MAC_IMM_AMPDU);
-}
-
-static void ar9170_tx_copy_phy(struct ar9170 *ar, struct sk_buff *dst,
-			       struct sk_buff *src)
-{
-	struct ar9170_tx_control *dst_txc, *src_txc;
-	struct ieee80211_tx_info *dst_info, *src_info;
-	struct ar9170_tx_info *dst_arinfo, *src_arinfo;
-
-	src_txc = (void *) src->data;
-	src_info = IEEE80211_SKB_CB(src);
-	src_arinfo = (void *) src_info->rate_driver_data;
-
-	dst_txc = (void *) dst->data;
-	dst_info = IEEE80211_SKB_CB(dst);
-	dst_arinfo = (void *) dst_info->rate_driver_data;
-
-	dst_txc->phy_control = src_txc->phy_control;
-
-	/* same MCS for the whole aggregate */
-	memcpy(dst_info->driver_rates, src_info->driver_rates,
-	       sizeof(dst_info->driver_rates));
-}
-
 static int ar9170_tx_prepare(struct ar9170 *ar, struct sk_buff *skb)
 {
 	struct ieee80211_hdr *hdr;
@@ -1419,14 +1249,7 @@ static int ar9170_tx_prepare(struct ar9170 *ar, struct sk_buff *skb)
 		txc->phy_control |=
 			cpu_to_le32(queue << AR9170_TX_PHY_QOS_SHIFT);
 
-		if (info->flags & IEEE80211_TX_CTL_AMPDU) {
-			if (unlikely(!info->control.sta))
-				goto err_out;
-
-			txc->mac_control |= cpu_to_le16(AR9170_TX_MAC_AGGR);
-		} else {
-			txc->mac_control |= cpu_to_le16(AR9170_TX_MAC_RATE_PROBE);
-		}
+		txc->mac_control |= cpu_to_le16(AR9170_TX_MAC_RATE_PROBE);
 	}
 
 	return 0;
@@ -1536,158 +1359,6 @@ static void ar9170_tx_prepare_phy(struct ar9170 *ar, struct sk_buff *skb)
 	txc->phy_control |= cpu_to_le32(chains << AR9170_TX_PHY_TXCHAIN_SHIFT);
 }
 
-static bool ar9170_tx_ampdu(struct ar9170 *ar)
-{
-	struct sk_buff_head agg;
-	struct ar9170_sta_tid *tid_info = NULL, *tmp;
-	struct sk_buff *skb, *first = NULL;
-	unsigned long flags, f2;
-	unsigned int i = 0;
-	u16 seq, queue, tmpssn;
-	bool run = false;
-
-	skb_queue_head_init(&agg);
-
-	spin_lock_irqsave(&ar->tx_ampdu_list_lock, flags);
-	if (list_empty(&ar->tx_ampdu_list)) {
-#ifdef AR9170_TXAGG_DEBUG
-		printk(KERN_DEBUG "%s: aggregation list is empty.\n",
-		       wiphy_name(ar->hw->wiphy));
-#endif /* AR9170_TXAGG_DEBUG */
-		goto out_unlock;
-	}
-
-	list_for_each_entry_safe(tid_info, tmp, &ar->tx_ampdu_list, list) {
-		if (tid_info->state != AR9170_TID_STATE_COMPLETE) {
-#ifdef AR9170_TXAGG_DEBUG
-			printk(KERN_DEBUG "%s: dangling aggregation entry!\n",
-			       wiphy_name(ar->hw->wiphy));
-#endif /* AR9170_TXAGG_DEBUG */
-			continue;
-		}
-
-		if (++i > 64) {
-#ifdef AR9170_TXAGG_DEBUG
-			printk(KERN_DEBUG "%s: enough frames aggregated.\n",
-			       wiphy_name(ar->hw->wiphy));
-#endif /* AR9170_TXAGG_DEBUG */
-			break;
-		}
-
-		queue = TID_TO_WME_AC(tid_info->tid);
-
-		if (skb_queue_len(&ar->tx_pending[queue]) >=
-		    AR9170_NUM_TX_AGG_MAX) {
-#ifdef AR9170_TXAGG_DEBUG
-			printk(KERN_DEBUG "%s: queue %d full.\n",
-			       wiphy_name(ar->hw->wiphy), queue);
-#endif /* AR9170_TXAGG_DEBUG */
-			continue;
-		}
-
-		list_del_init(&tid_info->list);
-
-		spin_lock_irqsave(&tid_info->queue.lock, f2);
-		tmpssn = seq = tid_info->ssn;
-		first = skb_peek(&tid_info->queue);
-
-		if (likely(first))
-			tmpssn = ar9170_get_seq(first);
-
-		if (unlikely(tmpssn != seq)) {
-#ifdef AR9170_TXAGG_DEBUG
-			printk(KERN_DEBUG "%s: ssn mismatch [%d != %d]\n.",
-			       wiphy_name(ar->hw->wiphy), seq, tmpssn);
-#endif /* AR9170_TXAGG_DEBUG */
-			tid_info->ssn = tmpssn;
-		}
-
-#ifdef AR9170_TXAGG_DEBUG
-		printk(KERN_DEBUG "%s: generate A-MPDU for tid:%d ssn:%d with "
-		       "%d queued frames.\n", wiphy_name(ar->hw->wiphy),
-		       tid_info->tid, tid_info->ssn,
-		       skb_queue_len(&tid_info->queue));
-		__ar9170_dump_txqueue(ar, &tid_info->queue);
-#endif /* AR9170_TXAGG_DEBUG */
-
-		while ((skb = skb_peek(&tid_info->queue))) {
-			if (unlikely(ar9170_get_seq(skb) != seq))
-				break;
-
-			__skb_unlink(skb, &tid_info->queue);
-			tid_info->ssn = seq = GET_NEXT_SEQ(seq);
-
-			if (unlikely(skb_get_queue_mapping(skb) != queue)) {
-#ifdef AR9170_TXAGG_DEBUG
-				printk(KERN_DEBUG "%s: tid:%d(q:%d) queue:%d "
-				       "!match.\n", wiphy_name(ar->hw->wiphy),
-				       tid_info->tid,
-				       TID_TO_WME_AC(tid_info->tid),
-				       skb_get_queue_mapping(skb));
-#endif /* AR9170_TXAGG_DEBUG */
-					dev_kfree_skb_any(skb);
-					continue;
-			}
-
-			if (unlikely(first == skb)) {
-				ar9170_tx_prepare_phy(ar, skb);
-				__skb_queue_tail(&agg, skb);
-				first = skb;
-			} else {
-				ar9170_tx_copy_phy(ar, skb, first);
-				__skb_queue_tail(&agg, skb);
-			}
-
-			if (unlikely(skb_queue_len(&agg) ==
-			    AR9170_NUM_TX_AGG_MAX))
-				break;
-		}
-
-		if (skb_queue_empty(&tid_info->queue))
-			tid_info->active = false;
-		else
-			list_add_tail(&tid_info->list,
-				      &ar->tx_ampdu_list);
-
-		spin_unlock_irqrestore(&tid_info->queue.lock, f2);
-
-		if (unlikely(skb_queue_empty(&agg))) {
-#ifdef AR9170_TXAGG_DEBUG
-			printk(KERN_DEBUG "%s: queued empty list!\n",
-			       wiphy_name(ar->hw->wiphy));
-#endif /* AR9170_TXAGG_DEBUG */
-			continue;
-		}
-
-		/*
-		 * tell the FW/HW that this is the last frame,
-		 * that way it will wait for the immediate block ack.
-		 */
-		ar9170_tx_indicate_immba(ar, skb_peek_tail(&agg));
-
-#ifdef AR9170_TXAGG_DEBUG
-		printk(KERN_DEBUG "%s: generated A-MPDU looks like this:\n",
-		       wiphy_name(ar->hw->wiphy));
-		__ar9170_dump_txqueue(ar, &agg);
-#endif /* AR9170_TXAGG_DEBUG */
-
-		spin_unlock_irqrestore(&ar->tx_ampdu_list_lock, flags);
-
-		spin_lock_irqsave(&ar->tx_pending[queue].lock, flags);
-		skb_queue_splice_tail_init(&agg, &ar->tx_pending[queue]);
-		spin_unlock_irqrestore(&ar->tx_pending[queue].lock, flags);
-		run = true;
-
-		spin_lock_irqsave(&ar->tx_ampdu_list_lock, flags);
-	}
-
-out_unlock:
-	spin_unlock_irqrestore(&ar->tx_ampdu_list_lock, flags);
-	__skb_queue_purge(&agg);
-
-	return run;
-}
-
 static void ar9170_tx(struct ar9170 *ar)
 {
 	struct sk_buff *skb;
@@ -1762,9 +1433,6 @@ static void ar9170_tx(struct ar9170 *ar)
 			arinfo->timeout = jiffies +
 					  msecs_to_jiffies(AR9170_TX_TIMEOUT);
 
-			if (info->flags & IEEE80211_TX_CTL_AMPDU)
-				atomic_inc(&ar->tx_ampdu_pending);
-
 #ifdef AR9170_QUEUE_DEBUG
 			printk(KERN_DEBUG "%s: send frame q:%d =>\n",
 			       wiphy_name(ar->hw->wiphy), i);
@@ -1773,9 +1441,6 @@ static void ar9170_tx(struct ar9170 *ar)
 
 			err = ar->tx(ar, skb);
 			if (unlikely(err)) {
-				if (info->flags & IEEE80211_TX_CTL_AMPDU)
-					atomic_dec(&ar->tx_ampdu_pending);
-
 				frames_failed++;
 				dev_kfree_skb_any(skb);
 			} else {
@@ -1822,94 +1487,11 @@ static void ar9170_tx(struct ar9170 *ar)
 				     msecs_to_jiffies(AR9170_JANITOR_DELAY));
 }
 
-static bool ar9170_tx_ampdu_queue(struct ar9170 *ar, struct sk_buff *skb)
-{
-	struct ieee80211_tx_info *txinfo;
-	struct ar9170_sta_info *sta_info;
-	struct ar9170_sta_tid *agg;
-	struct sk_buff *iter;
-	unsigned long flags, f2;
-	unsigned int max;
-	u16 tid, seq, qseq;
-	bool run = false, queue = false;
-
-	tid = ar9170_get_tid(skb);
-	seq = ar9170_get_seq(skb);
-	txinfo = IEEE80211_SKB_CB(skb);
-	sta_info = (void *) txinfo->control.sta->drv_priv;
-	agg = &sta_info->agg[tid];
-	max = sta_info->ampdu_max_len;
-
-	spin_lock_irqsave(&ar->tx_ampdu_list_lock, flags);
-
-	if (unlikely(agg->state != AR9170_TID_STATE_COMPLETE)) {
-#ifdef AR9170_TXAGG_DEBUG
-		printk(KERN_DEBUG "%s: BlockACK session not fully initialized "
-		       "for ESS:%pM tid:%d state:%d.\n",
-		       wiphy_name(ar->hw->wiphy), agg->addr, agg->tid,
-		       agg->state);
-#endif /* AR9170_TXAGG_DEBUG */
-		goto err_unlock;
-	}
-
-	if (!agg->active) {
-		agg->active = true;
-		agg->ssn = seq;
-		queue = true;
-	}
-
-	/* check if seq is within the BA window */
-	if (unlikely(!BAW_WITHIN(agg->ssn, max, seq))) {
-#ifdef AR9170_TXAGG_DEBUG
-		printk(KERN_DEBUG "%s: frame with tid:%d seq:%d does not "
-		       "fit into BA window (%d - %d)\n",
-		       wiphy_name(ar->hw->wiphy), tid, seq, agg->ssn,
-		       (agg->ssn + max) & 0xfff);
-#endif /* AR9170_TXAGG_DEBUG */
-		goto err_unlock;
-	}
-
-	spin_lock_irqsave(&agg->queue.lock, f2);
-
-	skb_queue_reverse_walk(&agg->queue, iter) {
-		qseq = ar9170_get_seq(iter);
-
-		if (GET_NEXT_SEQ(qseq) == seq) {
-			__skb_queue_after(&agg->queue, iter, skb);
-			goto queued;
-		}
-	}
-
-	__skb_queue_head(&agg->queue, skb);
-
-queued:
-	spin_unlock_irqrestore(&agg->queue.lock, f2);
-
-#ifdef AR9170_TXAGG_DEBUG
-	printk(KERN_DEBUG "%s: new aggregate %p queued.\n",
-	       wiphy_name(ar->hw->wiphy), skb);
-	__ar9170_dump_txqueue(ar, &agg->queue);
-#endif /* AR9170_TXAGG_DEBUG */
-
-	if (skb_queue_len(&agg->queue) >= AR9170_NUM_TX_AGG_MAX)
-		run = true;
-
-	if (queue)
-		list_add_tail(&agg->list, &ar->tx_ampdu_list);
-
-	spin_unlock_irqrestore(&ar->tx_ampdu_list_lock, flags);
-	return run;
-
-err_unlock:
-	spin_unlock_irqrestore(&ar->tx_ampdu_list_lock, flags);
-	dev_kfree_skb_irq(skb);
-	return false;
-}
-
 int ar9170_op_tx(struct ieee80211_hw *hw, struct sk_buff *skb)
 {
 	struct ar9170 *ar = hw->priv;
 	struct ieee80211_tx_info *info;
+	unsigned int queue;
 
 	if (unlikely(!IS_STARTED(ar)))
 		goto err_free;
@@ -1917,18 +1499,10 @@ int ar9170_op_tx(struct ieee80211_hw *hw, struct sk_buff *skb)
 	if (unlikely(ar9170_tx_prepare(ar, skb)))
 		goto err_free;
 
+	queue = skb_get_queue_mapping(skb);
 	info = IEEE80211_SKB_CB(skb);
-	if (info->flags & IEEE80211_TX_CTL_AMPDU) {
-		bool run = ar9170_tx_ampdu_queue(ar, skb);
-
-		if (run || !atomic_read(&ar->tx_ampdu_pending))
-			ar9170_tx_ampdu(ar);
-	} else {
-		unsigned int queue = skb_get_queue_mapping(skb);
-
-		ar9170_tx_prepare_phy(ar, skb);
-		skb_queue_tail(&ar->tx_pending[queue], skb);
-	}
+	ar9170_tx_prepare_phy(ar, skb);
+	skb_queue_tail(&ar->tx_pending[queue], skb);
 
 	ar9170_tx(ar);
 	return NETDEV_TX_OK;
@@ -2329,57 +1903,6 @@ out:
 	return err;
 }
 
-static int ar9170_sta_add(struct ieee80211_hw *hw,
-			  struct ieee80211_vif *vif,
-			  struct ieee80211_sta *sta)
-{
-	struct ar9170 *ar = hw->priv;
-	struct ar9170_sta_info *sta_info = (void *) sta->drv_priv;
-	unsigned int i;
-
-	memset(sta_info, 0, sizeof(*sta_info));
-
-	if (!sta->ht_cap.ht_supported)
-		return 0;
-
-	if (sta->ht_cap.ampdu_density > ar->global_ampdu_density)
-		ar->global_ampdu_density = sta->ht_cap.ampdu_density;
-
-	if (sta->ht_cap.ampdu_factor < ar->global_ampdu_factor)
-		ar->global_ampdu_factor = sta->ht_cap.ampdu_factor;
-
-	for (i = 0; i < AR9170_NUM_TID; i++) {
-		sta_info->agg[i].state = AR9170_TID_STATE_SHUTDOWN;
-		sta_info->agg[i].active = false;
-		sta_info->agg[i].ssn = 0;
-		sta_info->agg[i].tid = i;
-		INIT_LIST_HEAD(&sta_info->agg[i].list);
-		skb_queue_head_init(&sta_info->agg[i].queue);
-	}
-
-	sta_info->ampdu_max_len = 1 << (3 + sta->ht_cap.ampdu_factor);
-
-	return 0;
-}
-
-static int ar9170_sta_remove(struct ieee80211_hw *hw,
-			     struct ieee80211_vif *vif,
-			     struct ieee80211_sta *sta)
-{
-	struct ar9170_sta_info *sta_info = (void *) sta->drv_priv;
-	unsigned int i;
-
-	if (!sta->ht_cap.ht_supported)
-		return 0;
-
-	for (i = 0; i < AR9170_NUM_TID; i++) {
-		sta_info->agg[i].state = AR9170_TID_STATE_INVALID;
-		skb_queue_purge(&sta_info->agg[i].queue);
-	}
-
-	return 0;
-}
-
 static int ar9170_get_stats(struct ieee80211_hw *hw,
 			    struct ieee80211_low_level_stats *stats)
 {
@@ -2422,55 +1945,7 @@ static int ar9170_ampdu_action(struct ieee80211_hw *hw,
 			       enum ieee80211_ampdu_mlme_action action,
 			       struct ieee80211_sta *sta, u16 tid, u16 *ssn)
 {
-	struct ar9170 *ar = hw->priv;
-	struct ar9170_sta_info *sta_info = (void *) sta->drv_priv;
-	struct ar9170_sta_tid *tid_info = &sta_info->agg[tid];
-	unsigned long flags;
-
-	if (!modparam_ht)
-		return -EOPNOTSUPP;
-
 	switch (action) {
-	case IEEE80211_AMPDU_TX_START:
-		spin_lock_irqsave(&ar->tx_ampdu_list_lock, flags);
-		if (tid_info->state != AR9170_TID_STATE_SHUTDOWN ||
-		    !list_empty(&tid_info->list)) {
-			spin_unlock_irqrestore(&ar->tx_ampdu_list_lock, flags);
-#ifdef AR9170_TXAGG_DEBUG
-			printk(KERN_INFO "%s: A-MPDU [ESS:[%pM] tid:[%d]] "
-			       "is in a very bad state!\n",
-			       wiphy_name(hw->wiphy), sta->addr, tid);
-#endif /* AR9170_TXAGG_DEBUG */
-			return -EBUSY;
-		}
-
-		*ssn = tid_info->ssn;
-		tid_info->state = AR9170_TID_STATE_PROGRESS;
-		tid_info->active = false;
-		spin_unlock_irqrestore(&ar->tx_ampdu_list_lock, flags);
-		ieee80211_start_tx_ba_cb_irqsafe(vif, sta->addr, tid);
-		break;
-
-	case IEEE80211_AMPDU_TX_STOP:
-		spin_lock_irqsave(&ar->tx_ampdu_list_lock, flags);
-		tid_info->state = AR9170_TID_STATE_SHUTDOWN;
-		list_del_init(&tid_info->list);
-		tid_info->active = false;
-		skb_queue_purge(&tid_info->queue);
-		spin_unlock_irqrestore(&ar->tx_ampdu_list_lock, flags);
-		ieee80211_stop_tx_ba_cb_irqsafe(vif, sta->addr, tid);
-		break;
-
-	case IEEE80211_AMPDU_TX_OPERATIONAL:
-#ifdef AR9170_TXAGG_DEBUG
-		printk(KERN_INFO "%s: A-MPDU for %pM [tid:%d] Operational.\n",
-		       wiphy_name(hw->wiphy), sta->addr, tid);
-#endif /* AR9170_TXAGG_DEBUG */
-		spin_lock_irqsave(&ar->tx_ampdu_list_lock, flags);
-		sta_info->agg[tid].state = AR9170_TID_STATE_COMPLETE;
-		spin_unlock_irqrestore(&ar->tx_ampdu_list_lock, flags);
-		break;
-
 	case IEEE80211_AMPDU_RX_START:
 	case IEEE80211_AMPDU_RX_STOP:
 		/* Handled by firmware */
@@ -2496,8 +1971,6 @@ static const struct ieee80211_ops ar9170_ops = {
 	.bss_info_changed	= ar9170_op_bss_info_changed,
 	.get_tsf		= ar9170_op_get_tsf,
 	.set_key		= ar9170_set_key,
-	.sta_add		= ar9170_sta_add,
-	.sta_remove		= ar9170_sta_remove,
 	.get_stats		= ar9170_get_stats,
 	.ampdu_action		= ar9170_ampdu_action,
 };
@@ -2530,8 +2003,6 @@ void *ar9170_alloc(size_t priv_size)
 	mutex_init(&ar->mutex);
 	spin_lock_init(&ar->cmdlock);
 	spin_lock_init(&ar->tx_stats_lock);
-	spin_lock_init(&ar->tx_ampdu_list_lock);
-	skb_queue_head_init(&ar->tx_status_ampdu);
 	for (i = 0; i < __AR9170_NUM_TXQ; i++) {
 		skb_queue_head_init(&ar->tx_status[i]);
 		skb_queue_head_init(&ar->tx_pending[i]);
@@ -2539,7 +2010,6 @@ void *ar9170_alloc(size_t priv_size)
 	ar9170_rx_reset_rx_mpdu(ar);
 	INIT_WORK(&ar->beacon_work, ar9170_new_beacon);
 	INIT_DELAYED_WORK(&ar->tx_janitor, ar9170_tx_janitor);
-	INIT_LIST_HEAD(&ar->tx_ampdu_list);
 
 	/* all hw supports 2.4 GHz, so set channel to 1 by default */
 	ar->channel = &ar9170_2ghz_chantable[0];
@@ -2552,16 +2022,8 @@ void *ar9170_alloc(size_t priv_size)
 			 IEEE80211_HW_HOST_BROADCAST_PS_BUFFERING |
 			 IEEE80211_HW_SIGNAL_DBM;
 
-	if (modparam_ht) {
-		ar->hw->flags |= IEEE80211_HW_AMPDU_AGGREGATION;
-	} else {
-		ar9170_band_2GHz.ht_cap.ht_supported = false;
-		ar9170_band_5GHz.ht_cap.ht_supported = false;
-	}
-
 	ar->hw->queues = __AR9170_NUM_TXQ;
 	ar->hw->extra_tx_headroom = 8;
-	ar->hw->sta_data_size = sizeof(struct ar9170_sta_info);
 
 	ar->hw->max_rates = 1;
 	ar->hw->max_rate_tries = 3;
-- 
cgit v1.2.3-70-g09d2


From 3ef83d745bf5220bef3a0fd11b96eb9ac64c8e8e Mon Sep 17 00:00:00 2001
From: Felix Fietkau <nbd@openwrt.org>
Date: Tue, 4 May 2010 09:58:57 +0200
Subject: ath9k: fix another source of corrupt frames

Atheros hardware supports receiving frames that span multiple
descriptors and buffers. In this case, the rx status of every
descriptor except for the last one is invalid and may contain random
data. Because the driver does not support this, it needs to drop such
frames.

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/ath/ath9k/common.c | 10 ++++++++--
 1 file changed, 8 insertions(+), 2 deletions(-)

(limited to 'drivers/net/wireless')

diff --git a/drivers/net/wireless/ath/ath9k/common.c b/drivers/net/wireless/ath/ath9k/common.c
index b4424a623cf..579e15fb414 100644
--- a/drivers/net/wireless/ath/ath9k/common.c
+++ b/drivers/net/wireless/ath/ath9k/common.c
@@ -57,13 +57,19 @@ static bool ath9k_rx_accept(struct ath_common *common,
 	 * rs_more indicates chained descriptors which can be used
 	 * to link buffers together for a sort of scatter-gather
 	 * operation.
-	 *
+	 * reject the frame, we don't support scatter-gather yet and
+	 * the frame is probably corrupt anyway
+	 */
+	if (rx_stats->rs_more)
+		return false;
+
+	/*
 	 * The rx_stats->rs_status will not be set until the end of the
 	 * chained descriptors so it can be ignored if rs_more is set. The
 	 * rs_more will be false at the last element of the chained
 	 * descriptors.
 	 */
-	if (!rx_stats->rs_more && rx_stats->rs_status != 0) {
+	if (rx_stats->rs_status != 0) {
 		if (rx_stats->rs_status & ATH9K_RXERR_CRC)
 			rxs->flag |= RX_FLAG_FAILED_FCS_CRC;
 		if (rx_stats->rs_status & ATH9K_RXERR_PHY)
-- 
cgit v1.2.3-70-g09d2


From bac6fafd4d6a0af26aeb37277a39607f7ce0be77 Mon Sep 17 00:00:00 2001
From: David Kilroy <kilroyd@googlemail.com>
Date: Tue, 4 May 2010 22:54:41 +0100
Subject: orinoco: refactor xmit path

... so orinoco_usb can share some common functionality.

Handle 802.2 encapsulation and MIC calculation in that function.
The 802.3 header is prepended to the SKB. The calculated MIC is written
to a specified buffer. Also modify the transmit control word that will
be passed onto the hardware to specify whether the MIC is present, and
the key used.

Signed-off-by: David Kilroy <kilroyd@googlemail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/orinoco/main.c        | 169 ++++++++++++++++++-----------
 drivers/net/wireless/orinoco/orinoco.h     |   6 +
 drivers/net/wireless/orinoco/orinoco_usb.c |  91 ++++++++--------
 3 files changed, 155 insertions(+), 111 deletions(-)

(limited to 'drivers/net/wireless')

diff --git a/drivers/net/wireless/orinoco/main.c b/drivers/net/wireless/orinoco/main.c
index 7c9faa4c079..86f268cd89e 100644
--- a/drivers/net/wireless/orinoco/main.c
+++ b/drivers/net/wireless/orinoco/main.c
@@ -339,18 +339,109 @@ EXPORT_SYMBOL(orinoco_change_mtu);
 /* Tx path                                                          */
 /********************************************************************/
 
+/* Add encapsulation and MIC to the existing SKB.
+ * The main xmit routine will then send the whole lot to the card.
+ * Need 8 bytes headroom
+ * Need 8 bytes tailroom
+ *
+ *                          With encapsulated ethernet II frame
+ *                          --------
+ *                          803.3 header (14 bytes)
+ *                           dst[6]
+ * --------                  src[6]
+ * 803.3 header (14 bytes)   len[2]
+ *  dst[6]                  803.2 header (8 bytes)
+ *  src[6]                   encaps[6]
+ *  len[2] <- leave alone -> len[2]
+ * --------                 -------- <-- 0
+ * Payload                  Payload
+ * ...                      ...
+ *
+ * --------                 --------
+ *                          MIC (8 bytes)
+ *                          --------
+ *
+ * returns 0 on success, -ENOMEM on error.
+ */
+int orinoco_process_xmit_skb(struct sk_buff *skb,
+			     struct net_device *dev,
+			     struct orinoco_private *priv,
+			     int *tx_control,
+			     u8 *mic_buf)
+{
+	struct orinoco_tkip_key *key;
+	struct ethhdr *eh;
+	int do_mic;
+
+	key = (struct orinoco_tkip_key *) priv->keys[priv->tx_key].key;
+
+	do_mic = ((priv->encode_alg == ORINOCO_ALG_TKIP) &&
+		  (key != NULL));
+
+	if (do_mic)
+		*tx_control |= (priv->tx_key << HERMES_MIC_KEY_ID_SHIFT) |
+			HERMES_TXCTRL_MIC;
+
+	eh = (struct ethhdr *)skb->data;
+
+	/* Encapsulate Ethernet-II frames */
+	if (ntohs(eh->h_proto) > ETH_DATA_LEN) { /* Ethernet-II frame */
+		struct header_struct {
+			struct ethhdr eth;	/* 802.3 header */
+			u8 encap[6];		/* 802.2 header */
+		} __attribute__ ((packed)) hdr;
+		int len = skb->len + sizeof(encaps_hdr) - (2 * ETH_ALEN);
+
+		if (skb_headroom(skb) < ENCAPS_OVERHEAD) {
+			if (net_ratelimit())
+				printk(KERN_ERR
+				       "%s: Not enough headroom for 802.2 headers %d\n",
+				       dev->name, skb_headroom(skb));
+			return -ENOMEM;
+		}
+
+		/* Fill in new header */
+		memcpy(&hdr.eth, eh, 2 * ETH_ALEN);
+		hdr.eth.h_proto = htons(len);
+		memcpy(hdr.encap, encaps_hdr, sizeof(encaps_hdr));
+
+		/* Make room for the new header, and copy it in */
+		eh = (struct ethhdr *) skb_push(skb, ENCAPS_OVERHEAD);
+		memcpy(eh, &hdr, sizeof(hdr));
+	}
+
+	/* Calculate Michael MIC */
+	if (do_mic) {
+		size_t len = skb->len - ETH_HLEN;
+		u8 *mic = &mic_buf[0];
+
+		/* Have to write to an even address, so copy the spare
+		 * byte across */
+		if (skb->len % 2) {
+			*mic = skb->data[skb->len - 1];
+			mic++;
+		}
+
+		orinoco_mic(priv->tx_tfm_mic, key->tx_mic,
+			    eh->h_dest, eh->h_source, 0 /* priority */,
+			    skb->data + ETH_HLEN,
+			    len, mic);
+	}
+
+	return 0;
+}
+EXPORT_SYMBOL(orinoco_process_xmit_skb);
+
 static netdev_tx_t orinoco_xmit(struct sk_buff *skb, struct net_device *dev)
 {
 	struct orinoco_private *priv = ndev_priv(dev);
 	struct net_device_stats *stats = &priv->stats;
-	struct orinoco_tkip_key *key;
 	hermes_t *hw = &priv->hw;
 	int err = 0;
 	u16 txfid = priv->txfid;
-	struct ethhdr *eh;
 	int tx_control;
 	unsigned long flags;
-	int do_mic;
+	u8 mic_buf[MICHAEL_MIC_LEN+1];
 
 	if (!netif_running(dev)) {
 		printk(KERN_ERR "%s: Tx on stopped device!\n",
@@ -382,16 +473,12 @@ static netdev_tx_t orinoco_xmit(struct sk_buff *skb, struct net_device *dev)
 	if (skb->len < ETH_HLEN)
 		goto drop;
 
-	key = (struct orinoco_tkip_key *) priv->keys[priv->tx_key].key;
-
-	do_mic = ((priv->encode_alg == ORINOCO_ALG_TKIP) &&
-		  (key != NULL));
-
 	tx_control = HERMES_TXCTRL_TX_OK | HERMES_TXCTRL_TX_EX;
 
-	if (do_mic)
-		tx_control |= (priv->tx_key << HERMES_MIC_KEY_ID_SHIFT) |
-			HERMES_TXCTRL_MIC;
+	err = orinoco_process_xmit_skb(skb, dev, priv, &tx_control,
+				       &mic_buf[0]);
+	if (err)
+		goto drop;
 
 	if (priv->has_alt_txcntl) {
 		/* WPA enabled firmwares have tx_cntl at the end of
@@ -434,34 +521,6 @@ static netdev_tx_t orinoco_xmit(struct sk_buff *skb, struct net_device *dev)
 				   HERMES_802_3_OFFSET - HERMES_802_11_OFFSET);
 	}
 
-	eh = (struct ethhdr *)skb->data;
-
-	/* Encapsulate Ethernet-II frames */
-	if (ntohs(eh->h_proto) > ETH_DATA_LEN) { /* Ethernet-II frame */
-		struct header_struct {
-			struct ethhdr eth;	/* 802.3 header */
-			u8 encap[6];		/* 802.2 header */
-		} __attribute__ ((packed)) hdr;
-
-		/* Strip destination and source from the data */
-		skb_pull(skb, 2 * ETH_ALEN);
-
-		/* And move them to a separate header */
-		memcpy(&hdr.eth, eh, 2 * ETH_ALEN);
-		hdr.eth.h_proto = htons(sizeof(encaps_hdr) + skb->len);
-		memcpy(hdr.encap, encaps_hdr, sizeof(encaps_hdr));
-
-		/* Insert the SNAP header */
-		if (skb_headroom(skb) < sizeof(hdr)) {
-			printk(KERN_ERR
-			       "%s: Not enough headroom for 802.2 headers %d\n",
-			       dev->name, skb_headroom(skb));
-			goto drop;
-		}
-		eh = (struct ethhdr *) skb_push(skb, sizeof(hdr));
-		memcpy(eh, &hdr, sizeof(hdr));
-	}
-
 	err = hw->ops->bap_pwrite(hw, USER_BAP, skb->data, skb->len,
 				  txfid, HERMES_802_3_OFFSET);
 	if (err) {
@@ -470,32 +529,16 @@ static netdev_tx_t orinoco_xmit(struct sk_buff *skb, struct net_device *dev)
 		goto busy;
 	}
 
-	/* Calculate Michael MIC */
-	if (do_mic) {
-		u8 mic_buf[MICHAEL_MIC_LEN + 1];
-		u8 *mic;
-		size_t offset;
-		size_t len;
+	if (tx_control & HERMES_TXCTRL_MIC) {
+		size_t offset = HERMES_802_3_OFFSET + skb->len;
+		size_t len = MICHAEL_MIC_LEN;
 
-		if (skb->len % 2) {
-			/* MIC start is on an odd boundary */
-			mic_buf[0] = skb->data[skb->len - 1];
-			mic = &mic_buf[1];
-			offset = skb->len - 1;
-			len = MICHAEL_MIC_LEN + 1;
-		} else {
-			mic = &mic_buf[0];
-			offset = skb->len;
-			len = MICHAEL_MIC_LEN;
+		if (offset % 2) {
+			offset--;
+			len++;
 		}
-
-		orinoco_mic(priv->tx_tfm_mic, key->tx_mic,
-			    eh->h_dest, eh->h_source, 0 /* priority */,
-			    skb->data + ETH_HLEN, skb->len - ETH_HLEN, mic);
-
-		/* Write the MIC */
 		err = hw->ops->bap_pwrite(hw, USER_BAP, &mic_buf[0], len,
-					  txfid, HERMES_802_3_OFFSET + offset);
+					  txfid, offset);
 		if (err) {
 			printk(KERN_ERR "%s: Error %d writing MIC to BAP\n",
 			       dev->name, err);
@@ -2234,7 +2277,7 @@ int orinoco_if_add(struct orinoco_private *priv,
 	/* we use the default eth_mac_addr for setting the MAC addr */
 
 	/* Reserve space in skb for the SNAP header */
-	dev->hard_header_len += ENCAPS_OVERHEAD;
+	dev->needed_headroom = ENCAPS_OVERHEAD;
 
 	netif_carrier_off(dev);
 
diff --git a/drivers/net/wireless/orinoco/orinoco.h b/drivers/net/wireless/orinoco/orinoco.h
index e9f415a56d4..a6da86e0a70 100644
--- a/drivers/net/wireless/orinoco/orinoco.h
+++ b/drivers/net/wireless/orinoco/orinoco.h
@@ -200,6 +200,12 @@ extern irqreturn_t orinoco_interrupt(int irq, void *dev_id);
 extern void __orinoco_ev_info(struct net_device *dev, hermes_t *hw);
 extern void __orinoco_ev_rx(struct net_device *dev, hermes_t *hw);
 
+int orinoco_process_xmit_skb(struct sk_buff *skb,
+			     struct net_device *dev,
+			     struct orinoco_private *priv,
+			     int *tx_control,
+			     u8 *mic);
+
 /* Common ndo functions exported for reuse by orinoco_usb */
 int orinoco_open(struct net_device *dev);
 int orinoco_stop(struct net_device *dev);
diff --git a/drivers/net/wireless/orinoco/orinoco_usb.c b/drivers/net/wireless/orinoco/orinoco_usb.c
index e22093359f3..78f089baa8c 100644
--- a/drivers/net/wireless/orinoco/orinoco_usb.c
+++ b/drivers/net/wireless/orinoco/orinoco_usb.c
@@ -67,6 +67,7 @@
 #include <linux/wireless.h>
 #include <linux/firmware.h>
 
+#include "mic.h"
 #include "orinoco.h"
 
 #ifndef URB_ASYNC_UNLINK
@@ -1198,11 +1199,9 @@ static netdev_tx_t ezusb_xmit(struct sk_buff *skb, struct net_device *dev)
 	struct orinoco_private *priv = ndev_priv(dev);
 	struct net_device_stats *stats = &priv->stats;
 	struct ezusb_priv *upriv = priv->card;
+	u8 mic[MICHAEL_MIC_LEN+1];
 	int err = 0;
-	char *p;
-	struct ethhdr *eh;
-	int len, data_len, data_off;
-	__le16 tx_control;
+	int tx_control;
 	unsigned long flags;
 	struct request_context *ctx;
 	u8 *buf;
@@ -1222,7 +1221,7 @@ static netdev_tx_t ezusb_xmit(struct sk_buff *skb, struct net_device *dev)
 
 	if (orinoco_lock(priv, &flags) != 0) {
 		printk(KERN_ERR
-		       "%s: orinoco_xmit() called while hw_unavailable\n",
+		       "%s: ezusb_xmit() called while hw_unavailable\n",
 		       dev->name);
 		return NETDEV_TX_BUSY;
 	}
@@ -1232,53 +1231,46 @@ static netdev_tx_t ezusb_xmit(struct sk_buff *skb, struct net_device *dev)
 		/* Oops, the firmware hasn't established a connection,
 		   silently drop the packet (this seems to be the
 		   safest approach). */
-		stats->tx_errors++;
-		orinoco_unlock(priv, &flags);
-		dev_kfree_skb(skb);
-		return NETDEV_TX_OK;
+		goto drop;
 	}
 
+	/* Check packet length */
+	if (skb->len < ETH_HLEN)
+		goto drop;
+
 	ctx = ezusb_alloc_ctx(upriv, EZUSB_RID_TX, 0);
 	if (!ctx)
-		goto fail;
+		goto busy;
 
 	memset(ctx->buf, 0, BULK_BUF_SIZE);
 	buf = ctx->buf->data;
 
-	/* Length of the packet body */
-	/* FIXME: what if the skb is smaller than this? */
-	len = max_t(int, skb->len - ETH_HLEN, ETH_ZLEN - ETH_HLEN);
-
-	eh = (struct ethhdr *) skb->data;
-
-	tx_control = cpu_to_le16(0);
-	memcpy(buf, &tx_control, sizeof(tx_control));
-	buf += sizeof(tx_control);
-	/* Encapsulate Ethernet-II frames */
-	if (ntohs(eh->h_proto) > ETH_DATA_LEN) {	/* Ethernet-II frame */
-		struct header_struct *hdr = (void *) buf;
-		buf += sizeof(*hdr);
-		data_len = len;
-		data_off = sizeof(tx_control) + sizeof(*hdr);
-		p = skb->data + ETH_HLEN;
-
-		/* 802.3 header */
-		memcpy(hdr->dest, eh->h_dest, ETH_ALEN);
-		memcpy(hdr->src, eh->h_source, ETH_ALEN);
-		hdr->len = htons(data_len + ENCAPS_OVERHEAD);
-
-		/* 802.2 header */
-		memcpy(&hdr->dsap, &encaps_hdr, sizeof(encaps_hdr));
-
-		hdr->ethertype = eh->h_proto;
-	} else {		/* IEEE 802.3 frame */
-		data_len = len + ETH_HLEN;
-		data_off = sizeof(tx_control);
-		p = skb->data;
+	tx_control = 0;
+
+	err = orinoco_process_xmit_skb(skb, dev, priv, &tx_control,
+				       &mic[0]);
+	if (err)
+		goto drop;
+
+	{
+		__le16 *tx_cntl = (__le16 *)buf;
+		*tx_cntl = cpu_to_le16(tx_control);
+		buf += sizeof(*tx_cntl);
 	}
 
-	memcpy(buf, p, data_len);
-	buf += data_len;
+	memcpy(buf, skb->data, skb->len);
+	buf += skb->len;
+
+	if (tx_control & HERMES_TXCTRL_MIC) {
+		u8 *m = mic;
+		/* Mic has been offset so it can be copied to an even
+		 * address. We're copying eveything anyway, so we
+		 * don't need to copy that first byte. */
+		if (skb->len % 2)
+			m++;
+		memcpy(buf, m, MICHAEL_MIC_LEN);
+		buf += MICHAEL_MIC_LEN;
+	}
 
 	/* Finally, we actually initiate the send */
 	netif_stop_queue(dev);
@@ -1294,20 +1286,23 @@ static netdev_tx_t ezusb_xmit(struct sk_buff *skb, struct net_device *dev)
 		if (net_ratelimit())
 			printk(KERN_ERR "%s: Error %d transmitting packet\n",
 				dev->name, err);
-		stats->tx_errors++;
-		goto fail;
+		goto busy;
 	}
 
 	dev->trans_start = jiffies;
-	stats->tx_bytes += data_off + data_len;
+	stats->tx_bytes += skb->len;
+	goto ok;
 
-	orinoco_unlock(priv, &flags);
+ drop:
+	stats->tx_errors++;
+	stats->tx_dropped++;
 
+ ok:
+	orinoco_unlock(priv, &flags);
 	dev_kfree_skb(skb);
-
 	return NETDEV_TX_OK;
 
- fail:
+ busy:
 	orinoco_unlock(priv, &flags);
 	return NETDEV_TX_BUSY;
 }
-- 
cgit v1.2.3-70-g09d2


From f444de05d20e27cdd960c13fcbcfca3099f03143 Mon Sep 17 00:00:00 2001
From: Johannes Berg <johannes@sipsolutions.net>
Date: Wed, 5 May 2010 15:25:02 +0200
Subject: cfg80211/mac80211: better channel handling

Currently (all tested with hwsim) you can do stupid
things like setting up an AP on a certain channel,
then adding another virtual interface and making
that associate on another channel -- this will make
the beaconing to move channel but obviously without
the necessary IEs data update.

In order to improve this situation, first make the
configuration APIs (cfg80211 and nl80211) aware of
multi-channel operation -- we'll eventually need
that in the future anyway. There's one userland API
change and one API addition. The API change is that
now SET_WIPHY must be called with virtual interface
index rather than only wiphy index in order to take
effect for that interface -- luckily all current
users (hostapd) do that. For monitor interfaces, the
old setting is preserved, but monitors are always
slaved to other devices anyway so no guarantees.

The second userland API change is the introduction
of a per virtual interface SET_CHANNEL command, that
hostapd should use going forward to make it easier
to understand what's going on (it can automatically
detect a kernel with this command).

Other than mac80211, no existing cfg80211 drivers
are affected by this change because they only allow
a single virtual interface.

mac80211, however, now needs to be aware that the
channel settings are per interface now, and needs
to disallow (for now) real multi-channel operation,
which is another important part of this patch.

One of the immediate benefits is that you can now
start hostapd to operate on a hardware that already
has a connection on another virtual interface, as
long as you specify the same channel.

Note that two things are left unhandled (this is an
improvement -- not a complete fix):

 * different HT/no-HT modes

   currently you could start an HT AP and then
   connect to a non-HT network on the same channel
   which would configure the hardware for no HT;
   that can be fixed fairly easily

 * CSA

   An AP we're connected to on a virtual interface
   might indicate switching channels, and in that
   case we would follow it, regardless of how many
   other interfaces are operating; this requires
   more effort to fix but is pretty rare after all

Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/libertas/cfg.c |   1 +
 drivers/net/wireless/orinoco/cfg.c  |   1 +
 drivers/net/wireless/rndis_wlan.c   |   4 +-
 include/linux/nl80211.h             |  13 +++
 include/net/cfg80211.h              |  11 ++-
 net/mac80211/Makefile               |   3 +-
 net/mac80211/cfg.c                  |  41 +++++++++
 net/mac80211/chan.c                 |  57 ++++++++++++
 net/mac80211/ieee80211_i.h          |  11 +++
 net/wireless/chan.c                 |  56 ++++--------
 net/wireless/core.h                 |  12 +--
 net/wireless/ibss.c                 |   5 --
 net/wireless/nl80211.c              | 171 ++++++++++++++++++++++++++++--------
 net/wireless/sme.c                  |   5 --
 net/wireless/wext-compat.c          |  15 ++--
 net/wireless/wext-sme.c             |   2 +-
 16 files changed, 300 insertions(+), 108 deletions(-)
 create mode 100644 net/mac80211/chan.c

(limited to 'drivers/net/wireless')

diff --git a/drivers/net/wireless/libertas/cfg.c b/drivers/net/wireless/libertas/cfg.c
index 82ebe1461a7..ea9d0b2ea0d 100644
--- a/drivers/net/wireless/libertas/cfg.c
+++ b/drivers/net/wireless/libertas/cfg.c
@@ -78,6 +78,7 @@ static const u32 cipher_suites[] = {
 
 
 static int lbs_cfg_set_channel(struct wiphy *wiphy,
+	struct net_device *netdev,
 	struct ieee80211_channel *chan,
 	enum nl80211_channel_type channel_type)
 {
diff --git a/drivers/net/wireless/orinoco/cfg.c b/drivers/net/wireless/orinoco/cfg.c
index 81d228de9e5..8c4169c227a 100644
--- a/drivers/net/wireless/orinoco/cfg.c
+++ b/drivers/net/wireless/orinoco/cfg.c
@@ -159,6 +159,7 @@ static int orinoco_scan(struct wiphy *wiphy, struct net_device *dev,
 }
 
 static int orinoco_set_channel(struct wiphy *wiphy,
+			struct net_device *netdev,
 			struct ieee80211_channel *chan,
 			enum nl80211_channel_type channel_type)
 {
diff --git a/drivers/net/wireless/rndis_wlan.c b/drivers/net/wireless/rndis_wlan.c
index aceb95ef727..99d4f0de77c 100644
--- a/drivers/net/wireless/rndis_wlan.c
+++ b/drivers/net/wireless/rndis_wlan.c
@@ -534,7 +534,7 @@ static int rndis_join_ibss(struct wiphy *wiphy, struct net_device *dev,
 
 static int rndis_leave_ibss(struct wiphy *wiphy, struct net_device *dev);
 
-static int rndis_set_channel(struct wiphy *wiphy,
+static int rndis_set_channel(struct wiphy *wiphy, struct net_device *dev,
 	struct ieee80211_channel *chan, enum nl80211_channel_type channel_type);
 
 static int rndis_add_key(struct wiphy *wiphy, struct net_device *netdev,
@@ -2290,7 +2290,7 @@ static int rndis_leave_ibss(struct wiphy *wiphy, struct net_device *dev)
 	return deauthenticate(usbdev);
 }
 
-static int rndis_set_channel(struct wiphy *wiphy,
+static int rndis_set_channel(struct wiphy *wiphy, struct net_device *netdev,
 	struct ieee80211_channel *chan, enum nl80211_channel_type channel_type)
 {
 	struct rndis_wlan_private *priv = wiphy_priv(wiphy);
diff --git a/include/linux/nl80211.h b/include/linux/nl80211.h
index f8750f9a65b..b7c77f9712f 100644
--- a/include/linux/nl80211.h
+++ b/include/linux/nl80211.h
@@ -52,6 +52,8 @@
  *	%NL80211_ATTR_WIPHY_CHANNEL_TYPE, %NL80211_ATTR_WIPHY_RETRY_SHORT,
  *	%NL80211_ATTR_WIPHY_RETRY_LONG, %NL80211_ATTR_WIPHY_FRAG_THRESHOLD,
  *	and/or %NL80211_ATTR_WIPHY_RTS_THRESHOLD.
+ *	However, for setting the channel, see %NL80211_CMD_SET_CHANNEL
+ *	instead, the support here is for backward compatibility only.
  * @NL80211_CMD_NEW_WIPHY: Newly created wiphy, response to get request
  *	or rename notification. Has attributes %NL80211_ATTR_WIPHY and
  *	%NL80211_ATTR_WIPHY_NAME.
@@ -329,6 +331,15 @@
  * @NL80211_CMD_NOTIFY_CQM: Connection quality monitor notification. This
  *	command is used as an event to indicate the that a trigger level was
  *	reached.
+ * @NL80211_CMD_SET_CHANNEL: Set the channel (using %NL80211_ATTR_WIPHY_FREQ
+ *	and %NL80211_ATTR_WIPHY_CHANNEL_TYPE) the given interface (identifed
+ *	by %NL80211_ATTR_IFINDEX) shall operate on.
+ *	In case multiple channels are supported by the device, the mechanism
+ *	with which it switches channels is implementation-defined.
+ *	When a monitor interface is given, it can only switch channel while
+ *	no other interfaces are operating to avoid disturbing the operation
+ *	of any other interfaces, and other interfaces will again take
+ *	precedence when they are used.
  *
  * @NL80211_CMD_MAX: highest used command number
  * @__NL80211_CMD_AFTER_LAST: internal use
@@ -428,6 +439,8 @@ enum nl80211_commands {
 	NL80211_CMD_SET_CQM,
 	NL80211_CMD_NOTIFY_CQM,
 
+	NL80211_CMD_SET_CHANNEL,
+
 	/* add new commands above here */
 
 	/* used to define NL80211_CMD_MAX below */
diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h
index 7d10c0182f5..b44a2e5321a 100644
--- a/include/net/cfg80211.h
+++ b/include/net/cfg80211.h
@@ -966,7 +966,11 @@ struct cfg80211_pmksa {
  *
  * @set_txq_params: Set TX queue parameters
  *
- * @set_channel: Set channel
+ * @set_channel: Set channel for a given wireless interface. Some devices
+ *	may support multi-channel operation (by channel hopping) so cfg80211
+ *	doesn't verify much. Note, however, that the passed netdev may be
+ *	%NULL as well if the user requested changing the channel for the
+ *	device itself, or for a monitor interface.
  *
  * @scan: Request to do a scan. If returning zero, the scan request is given
  *	the driver, and will be valid until passed to cfg80211_scan_done().
@@ -1095,7 +1099,7 @@ struct cfg80211_ops {
 	int	(*set_txq_params)(struct wiphy *wiphy,
 				  struct ieee80211_txq_params *params);
 
-	int	(*set_channel)(struct wiphy *wiphy,
+	int	(*set_channel)(struct wiphy *wiphy, struct net_device *dev,
 			       struct ieee80211_channel *chan,
 			       enum nl80211_channel_type channel_type);
 
@@ -1461,6 +1465,8 @@ struct cfg80211_cached_keys;
  * @list: (private) Used to collect the interfaces
  * @netdev: (private) Used to reference back to the netdev
  * @current_bss: (private) Used by the internal configuration code
+ * @channel: (private) Used by the internal configuration code to track
+ *	user-set AP, monitor and WDS channels for wireless extensions
  * @bssid: (private) Used by the internal configuration code
  * @ssid: (private) Used by the internal configuration code
  * @ssid_len: (private) Used by the internal configuration code
@@ -1507,6 +1513,7 @@ struct wireless_dev {
 	struct cfg80211_internal_bss *authtry_bsses[MAX_AUTH_BSSES];
 	struct cfg80211_internal_bss *auth_bsses[MAX_AUTH_BSSES];
 	struct cfg80211_internal_bss *current_bss; /* associated / joined */
+	struct ieee80211_channel *channel;
 
 	bool ps;
 	int ps_timeout;
diff --git a/net/mac80211/Makefile b/net/mac80211/Makefile
index 04420291e7a..84b48ba8a77 100644
--- a/net/mac80211/Makefile
+++ b/net/mac80211/Makefile
@@ -23,7 +23,8 @@ mac80211-y := \
 	key.o \
 	util.o \
 	wme.o \
-	event.o
+	event.o \
+	chan.o
 
 mac80211-$(CONFIG_MAC80211_LEDS) += led.o
 mac80211-$(CONFIG_MAC80211_DEBUGFS) += \
diff --git a/net/mac80211/cfg.c b/net/mac80211/cfg.c
index b575a506621..414b7dd7d7f 100644
--- a/net/mac80211/cfg.c
+++ b/net/mac80211/cfg.c
@@ -1161,11 +1161,24 @@ static int ieee80211_set_txq_params(struct wiphy *wiphy,
 }
 
 static int ieee80211_set_channel(struct wiphy *wiphy,
+				 struct net_device *netdev,
 				 struct ieee80211_channel *chan,
 				 enum nl80211_channel_type channel_type)
 {
 	struct ieee80211_local *local = wiphy_priv(wiphy);
 
+	switch (ieee80211_get_channel_mode(local, NULL)) {
+	case CHAN_MODE_HOPPING:
+		return -EBUSY;
+	case CHAN_MODE_FIXED:
+		if (local->oper_channel == chan &&
+		    local->oper_channel_type == channel_type)
+			return 0;
+		return -EBUSY;
+	case CHAN_MODE_UNDEFINED:
+		break;
+	}
+
 	local->oper_channel = chan;
 	local->oper_channel_type = channel_type;
 
@@ -1213,6 +1226,20 @@ static int ieee80211_auth(struct wiphy *wiphy, struct net_device *dev,
 static int ieee80211_assoc(struct wiphy *wiphy, struct net_device *dev,
 			   struct cfg80211_assoc_request *req)
 {
+	struct ieee80211_local *local = wiphy_priv(wiphy);
+	struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
+
+	switch (ieee80211_get_channel_mode(local, sdata)) {
+	case CHAN_MODE_HOPPING:
+		return -EBUSY;
+	case CHAN_MODE_FIXED:
+		if (local->oper_channel == req->bss->channel)
+			break;
+		return -EBUSY;
+	case CHAN_MODE_UNDEFINED:
+		break;
+	}
+
 	return ieee80211_mgd_assoc(IEEE80211_DEV_TO_SUB_IF(dev), req);
 }
 
@@ -1235,8 +1262,22 @@ static int ieee80211_disassoc(struct wiphy *wiphy, struct net_device *dev,
 static int ieee80211_join_ibss(struct wiphy *wiphy, struct net_device *dev,
 			       struct cfg80211_ibss_params *params)
 {
+	struct ieee80211_local *local = wiphy_priv(wiphy);
 	struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
 
+	switch (ieee80211_get_channel_mode(local, sdata)) {
+	case CHAN_MODE_HOPPING:
+		return -EBUSY;
+	case CHAN_MODE_FIXED:
+		if (!params->channel_fixed)
+			return -EBUSY;
+		if (local->oper_channel == params->channel)
+			break;
+		return -EBUSY;
+	case CHAN_MODE_UNDEFINED:
+		break;
+	}
+
 	return ieee80211_ibss_join(sdata, params);
 }
 
diff --git a/net/mac80211/chan.c b/net/mac80211/chan.c
new file mode 100644
index 00000000000..08f3832661a
--- /dev/null
+++ b/net/mac80211/chan.c
@@ -0,0 +1,57 @@
+/*
+ * mac80211 - channel management
+ */
+
+#include "ieee80211_i.h"
+
+enum ieee80211_chan_mode
+__ieee80211_get_channel_mode(struct ieee80211_local *local,
+			     struct ieee80211_sub_if_data *ignore)
+{
+	struct ieee80211_sub_if_data *sdata;
+
+	WARN_ON(!mutex_is_locked(&local->iflist_mtx));
+
+	list_for_each_entry(sdata, &local->interfaces, list) {
+		if (sdata == ignore)
+			continue;
+
+		if (!ieee80211_sdata_running(sdata))
+			continue;
+
+		if (sdata->vif.type == NL80211_IFTYPE_MONITOR)
+			continue;
+
+		if (sdata->vif.type == NL80211_IFTYPE_STATION &&
+		    !sdata->u.mgd.associated)
+			continue;
+
+		if (sdata->vif.type == NL80211_IFTYPE_ADHOC) {
+			if (!sdata->u.ibss.ssid_len)
+				continue;
+			if (!sdata->u.ibss.fixed_channel)
+				return CHAN_MODE_HOPPING;
+		}
+
+		if (sdata->vif.type == NL80211_IFTYPE_AP &&
+		    !sdata->u.ap.beacon)
+			continue;
+
+		return CHAN_MODE_FIXED;
+	}
+
+	return CHAN_MODE_UNDEFINED;
+}
+
+enum ieee80211_chan_mode
+ieee80211_get_channel_mode(struct ieee80211_local *local,
+			   struct ieee80211_sub_if_data *ignore)
+{
+	enum ieee80211_chan_mode mode;
+
+	mutex_lock(&local->iflist_mtx);
+	mode = __ieee80211_get_channel_mode(local, ignore);
+	mutex_unlock(&local->iflist_mtx);
+
+	return mode;
+}
diff --git a/net/mac80211/ieee80211_i.h b/net/mac80211/ieee80211_i.h
index c8077a3647c..359edff3147 100644
--- a/net/mac80211/ieee80211_i.h
+++ b/net/mac80211/ieee80211_i.h
@@ -1229,6 +1229,17 @@ int ieee80211_wk_remain_on_channel(struct ieee80211_sub_if_data *sdata,
 int ieee80211_wk_cancel_remain_on_channel(
 	struct ieee80211_sub_if_data *sdata, u64 cookie);
 
+/* channel management */
+enum ieee80211_chan_mode {
+	CHAN_MODE_UNDEFINED,
+	CHAN_MODE_HOPPING,
+	CHAN_MODE_FIXED,
+};
+
+enum ieee80211_chan_mode
+ieee80211_get_channel_mode(struct ieee80211_local *local,
+			   struct ieee80211_sub_if_data *ignore);
+
 #ifdef CONFIG_MAC80211_NOINLINE
 #define debug_noinline noinline
 #else
diff --git a/net/wireless/chan.c b/net/wireless/chan.c
index bf1737fc9a7..d92d088026b 100644
--- a/net/wireless/chan.c
+++ b/net/wireless/chan.c
@@ -9,38 +9,6 @@
 #include <net/cfg80211.h>
 #include "core.h"
 
-struct ieee80211_channel *
-rdev_fixed_channel(struct cfg80211_registered_device *rdev,
-		   struct wireless_dev *for_wdev)
-{
-	struct wireless_dev *wdev;
-	struct ieee80211_channel *result = NULL;
-
-	WARN_ON(!mutex_is_locked(&rdev->devlist_mtx));
-
-	list_for_each_entry(wdev, &rdev->netdev_list, list) {
-		if (wdev == for_wdev)
-			continue;
-
-		/*
-		 * Lock manually to tell lockdep about allowed
-		 * nesting here if for_wdev->mtx is held already.
-		 * This is ok as it's all under the rdev devlist
-		 * mutex and as such can only be done once at any
-		 * given time.
-		 */
-		mutex_lock_nested(&wdev->mtx, SINGLE_DEPTH_NESTING);
-		if (wdev->current_bss)
-			result = wdev->current_bss->pub.channel;
-		wdev_unlock(wdev);
-
-		if (result)
-			break;
-	}
-
-	return result;
-}
-
 struct ieee80211_channel *
 rdev_freq_to_chan(struct cfg80211_registered_device *rdev,
 		  int freq, enum nl80211_channel_type channel_type)
@@ -75,15 +43,22 @@ rdev_freq_to_chan(struct cfg80211_registered_device *rdev,
 	return chan;
 }
 
-int rdev_set_freq(struct cfg80211_registered_device *rdev,
-		  struct wireless_dev *for_wdev,
-		  int freq, enum nl80211_channel_type channel_type)
+int cfg80211_set_freq(struct cfg80211_registered_device *rdev,
+		      struct wireless_dev *wdev, int freq,
+		      enum nl80211_channel_type channel_type)
 {
 	struct ieee80211_channel *chan;
 	int result;
 
-	if (rdev_fixed_channel(rdev, for_wdev))
-		return -EBUSY;
+	if (wdev->iftype == NL80211_IFTYPE_MONITOR)
+		wdev = NULL;
+
+	if (wdev) {
+		ASSERT_WDEV_LOCK(wdev);
+
+		if (!netif_running(wdev->netdev))
+			return -ENETDOWN;
+	}
 
 	if (!rdev->ops->set_channel)
 		return -EOPNOTSUPP;
@@ -92,11 +67,14 @@ int rdev_set_freq(struct cfg80211_registered_device *rdev,
 	if (!chan)
 		return -EINVAL;
 
-	result = rdev->ops->set_channel(&rdev->wiphy, chan, channel_type);
+	result = rdev->ops->set_channel(&rdev->wiphy,
+					wdev ? wdev->netdev : NULL,
+					chan, channel_type);
 	if (result)
 		return result;
 
-	rdev->channel = chan;
+	if (wdev)
+		wdev->channel = chan;
 
 	return 0;
 }
diff --git a/net/wireless/core.h b/net/wireless/core.h
index b2234b436ea..ae930acf75e 100644
--- a/net/wireless/core.h
+++ b/net/wireless/core.h
@@ -70,9 +70,6 @@ struct cfg80211_registered_device {
 	struct work_struct conn_work;
 	struct work_struct event_work;
 
-	/* current channel */
-	struct ieee80211_channel *channel;
-
 	/* must be last because of the way we do wiphy_priv(),
 	 * and it should at least be aligned to NETDEV_ALIGN */
 	struct wiphy wiphy __attribute__((__aligned__(NETDEV_ALIGN)));
@@ -387,15 +384,12 @@ int cfg80211_change_iface(struct cfg80211_registered_device *rdev,
 			  u32 *flags, struct vif_params *params);
 void cfg80211_process_rdev_events(struct cfg80211_registered_device *rdev);
 
-struct ieee80211_channel *
-rdev_fixed_channel(struct cfg80211_registered_device *rdev,
-		   struct wireless_dev *for_wdev);
 struct ieee80211_channel *
 rdev_freq_to_chan(struct cfg80211_registered_device *rdev,
 		  int freq, enum nl80211_channel_type channel_type);
-int rdev_set_freq(struct cfg80211_registered_device *rdev,
-		  struct wireless_dev *for_wdev,
-		  int freq, enum nl80211_channel_type channel_type);
+int cfg80211_set_freq(struct cfg80211_registered_device *rdev,
+		      struct wireless_dev *wdev, int freq,
+		      enum nl80211_channel_type channel_type);
 
 u16 cfg80211_calculate_bitrate(struct rate_info *rate);
 
diff --git a/net/wireless/ibss.c b/net/wireless/ibss.c
index 6ef5a491fb4..9825317e653 100644
--- a/net/wireless/ibss.c
+++ b/net/wireless/ibss.c
@@ -80,15 +80,10 @@ int __cfg80211_join_ibss(struct cfg80211_registered_device *rdev,
 			 struct cfg80211_cached_keys *connkeys)
 {
 	struct wireless_dev *wdev = dev->ieee80211_ptr;
-	struct ieee80211_channel *chan;
 	int err;
 
 	ASSERT_WDEV_LOCK(wdev);
 
-	chan = rdev_fixed_channel(rdev, wdev);
-	if (chan && chan != params->channel)
-		return -EBUSY;
-
 	if (wdev->ssid_len)
 		return -EALREADY;
 
diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c
index c27bef8e0c1..ec1b4a896c6 100644
--- a/net/wireless/nl80211.c
+++ b/net/wireless/nl80211.c
@@ -588,6 +588,7 @@ static int nl80211_send_wiphy(struct sk_buff *msg, u32 pid, u32 seq, int flags,
 		i++;
 		NLA_PUT_U32(msg, i, NL80211_CMD_SET_WIPHY_NETNS);
 	}
+	CMD(set_channel, SET_CHANNEL);
 
 #undef CMD
 
@@ -688,10 +689,90 @@ static int parse_txq_params(struct nlattr *tb[],
 	return 0;
 }
 
+static bool nl80211_can_set_dev_channel(struct wireless_dev *wdev)
+{
+	/*
+	 * You can only set the channel explicitly for AP, mesh
+	 * and WDS type interfaces; all others have their channel
+	 * managed via their respective "establish a connection"
+	 * command (connect, join, ...)
+	 *
+	 * Monitors are special as they are normally slaved to
+	 * whatever else is going on, so they behave as though
+	 * you tried setting the wiphy channel itself.
+	 */
+	return !wdev ||
+		wdev->iftype == NL80211_IFTYPE_AP ||
+		wdev->iftype == NL80211_IFTYPE_WDS ||
+		wdev->iftype == NL80211_IFTYPE_MESH_POINT ||
+		wdev->iftype == NL80211_IFTYPE_MONITOR;
+}
+
+static int __nl80211_set_channel(struct cfg80211_registered_device *rdev,
+				 struct wireless_dev *wdev,
+				 struct genl_info *info)
+{
+	enum nl80211_channel_type channel_type = NL80211_CHAN_NO_HT;
+	u32 freq;
+	int result;
+
+	if (!info->attrs[NL80211_ATTR_WIPHY_FREQ])
+		return -EINVAL;
+
+	if (!nl80211_can_set_dev_channel(wdev))
+		return -EOPNOTSUPP;
+
+	if (info->attrs[NL80211_ATTR_WIPHY_CHANNEL_TYPE]) {
+		channel_type = nla_get_u32(info->attrs[
+				   NL80211_ATTR_WIPHY_CHANNEL_TYPE]);
+		if (channel_type != NL80211_CHAN_NO_HT &&
+		    channel_type != NL80211_CHAN_HT20 &&
+		    channel_type != NL80211_CHAN_HT40PLUS &&
+		    channel_type != NL80211_CHAN_HT40MINUS)
+			return -EINVAL;
+	}
+
+	freq = nla_get_u32(info->attrs[NL80211_ATTR_WIPHY_FREQ]);
+
+	mutex_lock(&rdev->devlist_mtx);
+	if (wdev) {
+		wdev_lock(wdev);
+		result = cfg80211_set_freq(rdev, wdev, freq, channel_type);
+		wdev_unlock(wdev);
+	} else {
+		result = cfg80211_set_freq(rdev, NULL, freq, channel_type);
+	}
+	mutex_unlock(&rdev->devlist_mtx);
+
+	return result;
+}
+
+static int nl80211_set_channel(struct sk_buff *skb, struct genl_info *info)
+{
+	struct cfg80211_registered_device *rdev;
+	struct net_device *netdev;
+	int result;
+
+	rtnl_lock();
+
+	result = get_rdev_dev_by_info_ifindex(info, &rdev, &netdev);
+	if (result)
+		goto unlock;
+
+	result = __nl80211_set_channel(rdev, netdev->ieee80211_ptr, info);
+
+ unlock:
+	rtnl_unlock();
+
+	return result;
+}
+
 static int nl80211_set_wiphy(struct sk_buff *skb, struct genl_info *info)
 {
 	struct cfg80211_registered_device *rdev;
-	int result = 0, rem_txq_params = 0;
+	struct net_device *netdev = NULL;
+	struct wireless_dev *wdev;
+	int result, rem_txq_params = 0;
 	struct nlattr *nl_txq_params;
 	u32 changed;
 	u8 retry_short = 0, retry_long = 0;
@@ -700,16 +781,50 @@ static int nl80211_set_wiphy(struct sk_buff *skb, struct genl_info *info)
 
 	rtnl_lock();
 
+	/*
+	 * Try to find the wiphy and netdev. Normally this
+	 * function shouldn't need the netdev, but this is
+	 * done for backward compatibility -- previously
+	 * setting the channel was done per wiphy, but now
+	 * it is per netdev. Previous userland like hostapd
+	 * also passed a netdev to set_wiphy, so that it is
+	 * possible to let that go to the right netdev!
+	 */
 	mutex_lock(&cfg80211_mutex);
 
-	rdev = __cfg80211_rdev_from_info(info);
-	if (IS_ERR(rdev)) {
-		mutex_unlock(&cfg80211_mutex);
-		result = PTR_ERR(rdev);
-		goto unlock;
+	if (info->attrs[NL80211_ATTR_IFINDEX]) {
+		int ifindex = nla_get_u32(info->attrs[NL80211_ATTR_IFINDEX]);
+
+		netdev = dev_get_by_index(genl_info_net(info), ifindex);
+		if (netdev && netdev->ieee80211_ptr) {
+			rdev = wiphy_to_dev(netdev->ieee80211_ptr->wiphy);
+			mutex_lock(&rdev->mtx);
+		} else
+			netdev = NULL;
 	}
 
-	mutex_lock(&rdev->mtx);
+	if (!netdev) {
+		rdev = __cfg80211_rdev_from_info(info);
+		if (IS_ERR(rdev)) {
+			mutex_unlock(&cfg80211_mutex);
+			result = PTR_ERR(rdev);
+			goto unlock;
+		}
+		wdev = NULL;
+		netdev = NULL;
+		result = 0;
+
+		mutex_lock(&rdev->mtx);
+	} else if (netif_running(netdev) &&
+		   nl80211_can_set_dev_channel(netdev->ieee80211_ptr))
+		wdev = netdev->ieee80211_ptr;
+	else
+		wdev = NULL;
+
+	/*
+	 * end workaround code, by now the rdev is available
+	 * and locked, and wdev may or may not be NULL.
+	 */
 
 	if (info->attrs[NL80211_ATTR_WIPHY_NAME])
 		result = cfg80211_dev_rename(
@@ -748,26 +863,7 @@ static int nl80211_set_wiphy(struct sk_buff *skb, struct genl_info *info)
 	}
 
 	if (info->attrs[NL80211_ATTR_WIPHY_FREQ]) {
-		enum nl80211_channel_type channel_type = NL80211_CHAN_NO_HT;
-		u32 freq;
-
-		result = -EINVAL;
-
-		if (info->attrs[NL80211_ATTR_WIPHY_CHANNEL_TYPE]) {
-			channel_type = nla_get_u32(info->attrs[
-					   NL80211_ATTR_WIPHY_CHANNEL_TYPE]);
-			if (channel_type != NL80211_CHAN_NO_HT &&
-			    channel_type != NL80211_CHAN_HT20 &&
-			    channel_type != NL80211_CHAN_HT40PLUS &&
-			    channel_type != NL80211_CHAN_HT40MINUS)
-				goto bad_res;
-		}
-
-		freq = nla_get_u32(info->attrs[NL80211_ATTR_WIPHY_FREQ]);
-
-		mutex_lock(&rdev->devlist_mtx);
-		result = rdev_set_freq(rdev, NULL, freq, channel_type);
-		mutex_unlock(&rdev->devlist_mtx);
+		result = __nl80211_set_channel(rdev, wdev, info);
 		if (result)
 			goto bad_res;
 	}
@@ -864,6 +960,8 @@ static int nl80211_set_wiphy(struct sk_buff *skb, struct genl_info *info)
 
  bad_res:
 	mutex_unlock(&rdev->mtx);
+	if (netdev)
+		dev_put(netdev);
  unlock:
 	rtnl_unlock();
 	return result;
@@ -3561,9 +3659,8 @@ static int nl80211_associate(struct sk_buff *skb, struct genl_info *info)
 {
 	struct cfg80211_registered_device *rdev;
 	struct net_device *dev;
-	struct wireless_dev *wdev;
 	struct cfg80211_crypto_settings crypto;
-	struct ieee80211_channel *chan, *fixedchan;
+	struct ieee80211_channel *chan;
 	const u8 *bssid, *ssid, *ie = NULL, *prev_bssid = NULL;
 	int err, ssid_len, ie_len = 0;
 	bool use_mfp = false;
@@ -3606,16 +3703,6 @@ static int nl80211_associate(struct sk_buff *skb, struct genl_info *info)
 		goto out;
 	}
 
-	mutex_lock(&rdev->devlist_mtx);
-	wdev = dev->ieee80211_ptr;
-	fixedchan = rdev_fixed_channel(rdev, wdev);
-	if (fixedchan && chan != fixedchan) {
-		err = -EBUSY;
-		mutex_unlock(&rdev->devlist_mtx);
-		goto out;
-	}
-	mutex_unlock(&rdev->devlist_mtx);
-
 	ssid = nla_data(info->attrs[NL80211_ATTR_SSID]);
 	ssid_len = nla_len(info->attrs[NL80211_ATTR_SSID]);
 
@@ -5185,6 +5272,12 @@ static struct genl_ops nl80211_ops[] = {
 		.policy = nl80211_policy,
 		.flags = GENL_ADMIN_PERM,
 	},
+	{
+		.cmd = NL80211_CMD_SET_CHANNEL,
+		.doit = nl80211_set_channel,
+		.policy = nl80211_policy,
+		.flags = GENL_ADMIN_PERM,
+	},
 };
 
 static struct genl_multicast_group nl80211_mlme_mcgrp = {
diff --git a/net/wireless/sme.c b/net/wireless/sme.c
index dcd7685242f..14cf8163912 100644
--- a/net/wireless/sme.c
+++ b/net/wireless/sme.c
@@ -740,7 +740,6 @@ int __cfg80211_connect(struct cfg80211_registered_device *rdev,
 		       const u8 *prev_bssid)
 {
 	struct wireless_dev *wdev = dev->ieee80211_ptr;
-	struct ieee80211_channel *chan;
 	struct cfg80211_bss *bss = NULL;
 	int err;
 
@@ -749,10 +748,6 @@ int __cfg80211_connect(struct cfg80211_registered_device *rdev,
 	if (wdev->sme_state != CFG80211_SME_IDLE)
 		return -EALREADY;
 
-	chan = rdev_fixed_channel(rdev, wdev);
-	if (chan && chan != connect->channel)
-		return -EBUSY;
-
 	if (WARN_ON(wdev->connect_keys)) {
 		kfree(wdev->connect_keys);
 		wdev->connect_keys = NULL;
diff --git a/net/wireless/wext-compat.c b/net/wireless/wext-compat.c
index 9ab51838849..75848c6cb22 100644
--- a/net/wireless/wext-compat.c
+++ b/net/wireless/wext-compat.c
@@ -781,16 +781,22 @@ int cfg80211_wext_siwfreq(struct net_device *dev,
 		return cfg80211_mgd_wext_siwfreq(dev, info, wextfreq, extra);
 	case NL80211_IFTYPE_ADHOC:
 		return cfg80211_ibss_wext_siwfreq(dev, info, wextfreq, extra);
-	default:
+	case NL80211_IFTYPE_MONITOR:
+	case NL80211_IFTYPE_WDS:
+	case NL80211_IFTYPE_MESH_POINT:
 		freq = cfg80211_wext_freq(wdev->wiphy, wextfreq);
 		if (freq < 0)
 			return freq;
 		if (freq == 0)
 			return -EINVAL;
+		wdev_lock(wdev);
 		mutex_lock(&rdev->devlist_mtx);
-		err = rdev_set_freq(rdev, NULL, freq, NL80211_CHAN_NO_HT);
+		err = cfg80211_set_freq(rdev, wdev, freq, NL80211_CHAN_NO_HT);
 		mutex_unlock(&rdev->devlist_mtx);
+		wdev_unlock(wdev);
 		return err;
+	default:
+		return -EOPNOTSUPP;
 	}
 }
 EXPORT_SYMBOL_GPL(cfg80211_wext_siwfreq);
@@ -800,7 +806,6 @@ int cfg80211_wext_giwfreq(struct net_device *dev,
 			  struct iw_freq *freq, char *extra)
 {
 	struct wireless_dev *wdev = dev->ieee80211_ptr;
-	struct cfg80211_registered_device *rdev = wiphy_to_dev(wdev->wiphy);
 
 	switch (wdev->iftype) {
 	case NL80211_IFTYPE_STATION:
@@ -808,9 +813,9 @@ int cfg80211_wext_giwfreq(struct net_device *dev,
 	case NL80211_IFTYPE_ADHOC:
 		return cfg80211_ibss_wext_giwfreq(dev, info, freq, extra);
 	default:
-		if (!rdev->channel)
+		if (!wdev->channel)
 			return -EINVAL;
-		freq->m = rdev->channel->center_freq;
+		freq->m = wdev->channel->center_freq;
 		freq->e = 6;
 		return 0;
 	}
diff --git a/net/wireless/wext-sme.c b/net/wireless/wext-sme.c
index 5615a880253..8e5ab4f4e9c 100644
--- a/net/wireless/wext-sme.c
+++ b/net/wireless/wext-sme.c
@@ -107,7 +107,7 @@ int cfg80211_mgd_wext_siwfreq(struct net_device *dev,
 
 	/* SSID is not set, we just want to switch channel */
 	if (chan && !wdev->wext.connect.ssid_len) {
-		err = rdev_set_freq(rdev, wdev, freq, NL80211_CHAN_NO_HT);
+		err = cfg80211_set_freq(rdev, wdev, freq, NL80211_CHAN_NO_HT);
 		goto out;
 	}
 
-- 
cgit v1.2.3-70-g09d2


From 0aaffa9b9699894aab3266195a529baf9f96ac29 Mon Sep 17 00:00:00 2001
From: Johannes Berg <johannes@sipsolutions.net>
Date: Wed, 5 May 2010 15:28:27 +0200
Subject: mac80211: improve HT channel handling

Currently, when one interface switches HT mode,
all others will follow along. This is clearly
undesirable, since the new one might switch to
no-HT while another one is operating in HT.

Address this issue by keeping track of the HT
mode per interface, and allowing only changes
that are compatible, i.e. switching into HT40+
is not possible when another interface is in
HT40-, in that case the second one needs to
fall back to HT20.

Also, to allow drivers to know what's going on,
store the per-interface HT mode (channel type)
in the virtual interface's bss_conf.

Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/mac80211_hwsim.c | 19 +++++-----
 include/net/mac80211.h                |  4 ++
 net/mac80211/cfg.c                    | 23 +++++++++---
 net/mac80211/chan.c                   | 70 +++++++++++++++++++++++++++++++++++
 net/mac80211/ibss.c                   |  5 ++-
 net/mac80211/ieee80211_i.h            |  5 ++-
 net/mac80211/main.c                   |  2 +-
 net/mac80211/mlme.c                   | 44 +++++++++++-----------
 8 files changed, 132 insertions(+), 40 deletions(-)

(limited to 'drivers/net/wireless')

diff --git a/drivers/net/wireless/mac80211_hwsim.c b/drivers/net/wireless/mac80211_hwsim.c
index 62a739f6c37..bdce71a4ba2 100644
--- a/drivers/net/wireless/mac80211_hwsim.c
+++ b/drivers/net/wireless/mac80211_hwsim.c
@@ -651,17 +651,17 @@ static void mac80211_hwsim_beacon(unsigned long arg)
 	add_timer(&data->beacon_timer);
 }
 
+static const char *hwsim_chantypes[] = {
+	[NL80211_CHAN_NO_HT] = "noht",
+	[NL80211_CHAN_HT20] = "ht20",
+	[NL80211_CHAN_HT40MINUS] = "ht40-",
+	[NL80211_CHAN_HT40PLUS] = "ht40+",
+};
 
 static int mac80211_hwsim_config(struct ieee80211_hw *hw, u32 changed)
 {
 	struct mac80211_hwsim_data *data = hw->priv;
 	struct ieee80211_conf *conf = &hw->conf;
-	static const char *chantypes[4] = {
-		[NL80211_CHAN_NO_HT] = "noht",
-		[NL80211_CHAN_HT20] = "ht20",
-		[NL80211_CHAN_HT40MINUS] = "ht40-",
-		[NL80211_CHAN_HT40PLUS] = "ht40+",
-	};
 	static const char *smps_modes[IEEE80211_SMPS_NUM_MODES] = {
 		[IEEE80211_SMPS_AUTOMATIC] = "auto",
 		[IEEE80211_SMPS_OFF] = "off",
@@ -672,7 +672,7 @@ static int mac80211_hwsim_config(struct ieee80211_hw *hw, u32 changed)
 	printk(KERN_DEBUG "%s:%s (freq=%d/%s idle=%d ps=%d smps=%s)\n",
 	       wiphy_name(hw->wiphy), __func__,
 	       conf->channel->center_freq,
-	       chantypes[conf->channel_type],
+	       hwsim_chantypes[conf->channel_type],
 	       !!(conf->flags & IEEE80211_CONF_IDLE),
 	       !!(conf->flags & IEEE80211_CONF_PS),
 	       smps_modes[conf->smps_mode]);
@@ -760,9 +760,10 @@ static void mac80211_hwsim_bss_info_changed(struct ieee80211_hw *hw,
 	}
 
 	if (changed & BSS_CHANGED_HT) {
-		printk(KERN_DEBUG "  %s: HT: op_mode=0x%x\n",
+		printk(KERN_DEBUG "  %s: HT: op_mode=0x%x, chantype=%s\n",
 		       wiphy_name(hw->wiphy),
-		       info->ht_operation_mode);
+		       info->ht_operation_mode,
+		       hwsim_chantypes[info->channel_type]);
 	}
 
 	if (changed & BSS_CHANGED_BASIC_RATES) {
diff --git a/include/net/mac80211.h b/include/net/mac80211.h
index 0528615ac82..9448a5b1bb1 100644
--- a/include/net/mac80211.h
+++ b/include/net/mac80211.h
@@ -191,6 +191,9 @@ enum ieee80211_bss_change {
  *	the current band.
  * @bssid: The BSSID for this BSS
  * @enable_beacon: whether beaconing should be enabled or not
+ * @channel_type: Channel type for this BSS -- the hardware might be
+ *	configured for HT40+ while this BSS only uses no-HT, for
+ *	example.
  * @ht_operation_mode: HT operation mode (like in &struct ieee80211_ht_info).
  *	This field is only valid when the channel type is one of the HT types.
  * @cqm_rssi_thold: Connection quality monitor RSSI threshold, a zero value
@@ -215,6 +218,7 @@ struct ieee80211_bss_conf {
 	u16 ht_operation_mode;
 	s32 cqm_rssi_thold;
 	u32 cqm_rssi_hyst;
+	enum nl80211_channel_type channel_type;
 };
 
 /**
diff --git a/net/mac80211/cfg.c b/net/mac80211/cfg.c
index 414b7dd7d7f..ab166c6d939 100644
--- a/net/mac80211/cfg.c
+++ b/net/mac80211/cfg.c
@@ -1166,23 +1166,34 @@ static int ieee80211_set_channel(struct wiphy *wiphy,
 				 enum nl80211_channel_type channel_type)
 {
 	struct ieee80211_local *local = wiphy_priv(wiphy);
+	struct ieee80211_sub_if_data *sdata = NULL;
+
+	if (netdev)
+		sdata = IEEE80211_DEV_TO_SUB_IF(netdev);
 
 	switch (ieee80211_get_channel_mode(local, NULL)) {
 	case CHAN_MODE_HOPPING:
 		return -EBUSY;
 	case CHAN_MODE_FIXED:
-		if (local->oper_channel == chan &&
-		    local->oper_channel_type == channel_type)
+		if (local->oper_channel != chan)
+			return -EBUSY;
+		if (!sdata && local->_oper_channel_type == channel_type)
 			return 0;
-		return -EBUSY;
+		break;
 	case CHAN_MODE_UNDEFINED:
 		break;
 	}
 
 	local->oper_channel = chan;
-	local->oper_channel_type = channel_type;
 
-	return ieee80211_hw_config(local, IEEE80211_CONF_CHANGE_CHANNEL);
+	if (!ieee80211_set_channel_type(local, sdata, channel_type))
+		return -EBUSY;
+
+	ieee80211_hw_config(local, IEEE80211_CONF_CHANGE_CHANNEL);
+	if (sdata && sdata->vif.type != NL80211_IFTYPE_MONITOR)
+		ieee80211_bss_info_change_notify(sdata, BSS_CHANGED_HT);
+
+	return 0;
 }
 
 #ifdef CONFIG_PM
@@ -1406,7 +1417,7 @@ int __ieee80211_request_smps(struct ieee80211_sub_if_data *sdata,
 	 * association, there's no need to send an action frame.
 	 */
 	if (!sdata->u.mgd.associated ||
-	    sdata->local->oper_channel_type == NL80211_CHAN_NO_HT) {
+	    sdata->vif.bss_conf.channel_type == NL80211_CHAN_NO_HT) {
 		mutex_lock(&sdata->local->iflist_mtx);
 		ieee80211_recalc_smps(sdata->local, sdata);
 		mutex_unlock(&sdata->local->iflist_mtx);
diff --git a/net/mac80211/chan.c b/net/mac80211/chan.c
index 08f3832661a..5d218c530a4 100644
--- a/net/mac80211/chan.c
+++ b/net/mac80211/chan.c
@@ -2,6 +2,7 @@
  * mac80211 - channel management
  */
 
+#include <linux/nl80211.h>
 #include "ieee80211_i.h"
 
 enum ieee80211_chan_mode
@@ -55,3 +56,72 @@ ieee80211_get_channel_mode(struct ieee80211_local *local,
 
 	return mode;
 }
+
+bool ieee80211_set_channel_type(struct ieee80211_local *local,
+				struct ieee80211_sub_if_data *sdata,
+				enum nl80211_channel_type chantype)
+{
+	struct ieee80211_sub_if_data *tmp;
+	enum nl80211_channel_type superchan = NL80211_CHAN_NO_HT;
+	bool result;
+
+	mutex_lock(&local->iflist_mtx);
+
+	list_for_each_entry(tmp, &local->interfaces, list) {
+		if (tmp == sdata)
+			continue;
+
+		if (!ieee80211_sdata_running(tmp))
+			continue;
+
+		switch (tmp->vif.bss_conf.channel_type) {
+		case NL80211_CHAN_NO_HT:
+		case NL80211_CHAN_HT20:
+			superchan = tmp->vif.bss_conf.channel_type;
+			break;
+		case NL80211_CHAN_HT40PLUS:
+			WARN_ON(superchan == NL80211_CHAN_HT40MINUS);
+			superchan = NL80211_CHAN_HT40PLUS;
+			break;
+		case NL80211_CHAN_HT40MINUS:
+			WARN_ON(superchan == NL80211_CHAN_HT40PLUS);
+			superchan = NL80211_CHAN_HT40MINUS;
+			break;
+		}
+	}
+
+	switch (superchan) {
+	case NL80211_CHAN_NO_HT:
+	case NL80211_CHAN_HT20:
+		/*
+		 * allow any change that doesn't go to no-HT
+		 * (if it already is no-HT no change is needed)
+		 */
+		if (chantype == NL80211_CHAN_NO_HT)
+			break;
+		superchan = chantype;
+		break;
+	case NL80211_CHAN_HT40PLUS:
+	case NL80211_CHAN_HT40MINUS:
+		/* allow smaller bandwidth and same */
+		if (chantype == NL80211_CHAN_NO_HT)
+			break;
+		if (chantype == NL80211_CHAN_HT20)
+			break;
+		if (superchan == chantype)
+			break;
+		result = false;
+		goto out;
+	}
+
+	local->_oper_channel_type = superchan;
+
+	if (sdata)
+		sdata->vif.bss_conf.channel_type = chantype;
+
+	result = true;
+ out:
+	mutex_unlock(&local->iflist_mtx);
+
+	return result;
+}
diff --git a/net/mac80211/ibss.c b/net/mac80211/ibss.c
index d5855ae387e..36745f494f6 100644
--- a/net/mac80211/ibss.c
+++ b/net/mac80211/ibss.c
@@ -102,7 +102,7 @@ static void __ieee80211_sta_join_ibss(struct ieee80211_sub_if_data *sdata,
 	sdata->drop_unencrypted = capability & WLAN_CAPABILITY_PRIVACY ? 1 : 0;
 
 	local->oper_channel = chan;
-	local->oper_channel_type = NL80211_CHAN_NO_HT;
+	WARN_ON(!ieee80211_set_channel_type(local, sdata, NL80211_CHAN_NO_HT));
 	ieee80211_hw_config(local, IEEE80211_CONF_CHANGE_CHANNEL);
 
 	sband = local->hw.wiphy->bands[chan->band];
@@ -910,7 +910,8 @@ int ieee80211_ibss_join(struct ieee80211_sub_if_data *sdata,
 	/* fix ourselves to that channel now already */
 	if (params->channel_fixed) {
 		sdata->local->oper_channel = params->channel;
-		sdata->local->oper_channel_type = NL80211_CHAN_NO_HT;
+		WARN_ON(!ieee80211_set_channel_type(sdata->local, sdata,
+						    NL80211_CHAN_NO_HT));
 	}
 
 	if (params->ie) {
diff --git a/net/mac80211/ieee80211_i.h b/net/mac80211/ieee80211_i.h
index 359edff3147..69e7f4131f4 100644
--- a/net/mac80211/ieee80211_i.h
+++ b/net/mac80211/ieee80211_i.h
@@ -768,7 +768,7 @@ struct ieee80211_local {
 	enum mac80211_scan_state next_scan_state;
 	struct delayed_work scan_work;
 	struct ieee80211_sub_if_data *scan_sdata;
-	enum nl80211_channel_type oper_channel_type;
+	enum nl80211_channel_type _oper_channel_type;
 	struct ieee80211_channel *oper_channel, *csa_channel;
 
 	/* Temporary remain-on-channel for off-channel operations */
@@ -1239,6 +1239,9 @@ enum ieee80211_chan_mode {
 enum ieee80211_chan_mode
 ieee80211_get_channel_mode(struct ieee80211_local *local,
 			   struct ieee80211_sub_if_data *ignore);
+bool ieee80211_set_channel_type(struct ieee80211_local *local,
+				struct ieee80211_sub_if_data *sdata,
+				enum nl80211_channel_type chantype);
 
 #ifdef CONFIG_MAC80211_NOINLINE
 #define debug_noinline noinline
diff --git a/net/mac80211/main.c b/net/mac80211/main.c
index 353b6b42d9c..d763d76e809 100644
--- a/net/mac80211/main.c
+++ b/net/mac80211/main.c
@@ -111,7 +111,7 @@ int ieee80211_hw_config(struct ieee80211_local *local, u32 changed)
 		channel_type = local->tmp_channel_type;
 	} else {
 		chan = local->oper_channel;
-		channel_type = local->oper_channel_type;
+		channel_type = local->_oper_channel_type;
 	}
 
 	if (chan != local->hw.conf.channel ||
diff --git a/net/mac80211/mlme.c b/net/mac80211/mlme.c
index 17cb8ae912b..6e149b49d4f 100644
--- a/net/mac80211/mlme.c
+++ b/net/mac80211/mlme.c
@@ -136,11 +136,14 @@ static u32 ieee80211_enable_ht(struct ieee80211_sub_if_data *sdata,
 	struct sta_info *sta;
 	u32 changed = 0;
 	u16 ht_opmode;
-	bool enable_ht = true, ht_changed;
+	bool enable_ht = true;
+	enum nl80211_channel_type prev_chantype;
 	enum nl80211_channel_type channel_type = NL80211_CHAN_NO_HT;
 
 	sband = local->hw.wiphy->bands[local->hw.conf.channel->band];
 
+	prev_chantype = sdata->vif.bss_conf.channel_type;
+
 	/* HT is not supported */
 	if (!sband->ht_cap.ht_supported)
 		enable_ht = false;
@@ -171,38 +174,37 @@ static u32 ieee80211_enable_ht(struct ieee80211_sub_if_data *sdata,
 		}
 	}
 
-	ht_changed = conf_is_ht(&local->hw.conf) != enable_ht ||
-		     channel_type != local->hw.conf.channel_type;
-
 	if (local->tmp_channel)
 		local->tmp_channel_type = channel_type;
-	local->oper_channel_type = channel_type;
 
-	if (ht_changed) {
-                /* channel_type change automatically detected */
-		ieee80211_hw_config(local, 0);
+	if (!ieee80211_set_channel_type(local, sdata, channel_type)) {
+		/* can only fail due to HT40+/- mismatch */
+		channel_type = NL80211_CHAN_HT20;
+		WARN_ON(!ieee80211_set_channel_type(local, sdata, channel_type));
+	}
 
+	/* channel_type change automatically detected */
+	ieee80211_hw_config(local, 0);
+
+	if (prev_chantype != channel_type) {
 		rcu_read_lock();
 		sta = sta_info_get(sdata, bssid);
 		if (sta)
 			rate_control_rate_update(local, sband, sta,
 						 IEEE80211_RC_HT_CHANGED,
-						 local->oper_channel_type);
+						 channel_type);
 		rcu_read_unlock();
-        }
-
-	/* disable HT */
-	if (!enable_ht)
-		return 0;
+	}
 
 	ht_opmode = le16_to_cpu(hti->operation_mode);
 
 	/* if bss configuration changed store the new one */
-	if (!sdata->ht_opmode_valid ||
-	    sdata->vif.bss_conf.ht_operation_mode != ht_opmode) {
+	if (sdata->ht_opmode_valid != enable_ht ||
+	    sdata->vif.bss_conf.ht_operation_mode != ht_opmode ||
+	    prev_chantype != channel_type) {
 		changed |= BSS_CHANGED_HT;
 		sdata->vif.bss_conf.ht_operation_mode = ht_opmode;
-		sdata->ht_opmode_valid = true;
+		sdata->ht_opmode_valid = enable_ht;
 	}
 
 	return changed;
@@ -865,7 +867,7 @@ static void ieee80211_set_disassoc(struct ieee80211_sub_if_data *sdata,
 	ieee80211_set_wmm_default(sdata);
 
 	/* channel(_type) changes are handled by ieee80211_hw_config */
-	local->oper_channel_type = NL80211_CHAN_NO_HT;
+	WARN_ON(!ieee80211_set_channel_type(local, sdata, NL80211_CHAN_NO_HT));
 
 	/* on the next assoc, re-program HT parameters */
 	sdata->ht_opmode_valid = false;
@@ -882,8 +884,8 @@ static void ieee80211_set_disassoc(struct ieee80211_sub_if_data *sdata,
 
 	ieee80211_hw_config(local, config_changed);
 
-	/* And the BSSID changed -- not very interesting here */
-	changed |= BSS_CHANGED_BSSID;
+	/* The BSSID (not really interesting) and HT changed */
+	changed |= BSS_CHANGED_BSSID | BSS_CHANGED_HT;
 	ieee80211_bss_info_change_notify(sdata, changed);
 
 	if (remove_sta)
@@ -2265,7 +2267,7 @@ int ieee80211_mgd_action(struct ieee80211_sub_if_data *sdata,
 	if ((chan != local->tmp_channel ||
 	     channel_type != local->tmp_channel_type) &&
 	    (chan != local->oper_channel ||
-	     channel_type != local->oper_channel_type))
+	     channel_type != local->_oper_channel_type))
 		return -EBUSY;
 
 	skb = dev_alloc_skb(local->hw.extra_tx_headroom + len);
-- 
cgit v1.2.3-70-g09d2


From 9c6dda4e2dfea970a7105e3805f0195bc3079f2f Mon Sep 17 00:00:00 2001
From: Sujith <Sujith.Manoharan@atheros.com>
Date: Thu, 6 May 2010 14:45:47 +0530
Subject: ath9k_htc: Fix beaconing in IBSS mode

The current way of managing beaconing in ad-hoc
mode has a subtle race - the beacon obtained from mac80211
is freed in the SWBA handler rather than the TX
completion routine. But transmission of beacons goes
through the normal SKB queue maintained in hif_usb,
leading to a situation where __skb_dequeue() in the TX
completion handler goes kaput.

Fix this by simply getting a beacon from mac80211 for
every SWBA and free it in its completion routine.

Signed-off-by: Sujith <Sujith.Manoharan@atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/ath/ath9k/htc.h            |  5 ++--
 drivers/net/wireless/ath/ath9k/htc_drv_beacon.c | 39 +++++++------------------
 drivers/net/wireless/ath/ath9k/htc_drv_init.c   |  2 +-
 drivers/net/wireless/ath/ath9k/htc_drv_main.c   | 12 --------
 4 files changed, 13 insertions(+), 45 deletions(-)

(limited to 'drivers/net/wireless')

diff --git a/drivers/net/wireless/ath/ath9k/htc.h b/drivers/net/wireless/ath/ath9k/htc.h
index 1ae18bbc4d9..ad556aa8da3 100644
--- a/drivers/net/wireless/ath/ath9k/htc.h
+++ b/drivers/net/wireless/ath/ath9k/htc.h
@@ -356,7 +356,6 @@ struct ath9k_htc_priv {
 	u16 seq_no;
 	u32 bmiss_cnt;
 
-	struct sk_buff *beacon;
 	spinlock_t beacon_lock;
 
 	bool tx_queues_stop;
@@ -408,13 +407,13 @@ static inline void ath_read_cachesize(struct ath_common *common, int *csz)
 void ath9k_htc_beacon_config(struct ath9k_htc_priv *priv,
 			     struct ieee80211_vif *vif);
 void ath9k_htc_swba(struct ath9k_htc_priv *priv, u8 beacon_pending);
-void ath9k_htc_beacon_update(struct ath9k_htc_priv *priv,
-			     struct ieee80211_vif *vif);
 
 void ath9k_htc_rxep(void *priv, struct sk_buff *skb,
 		    enum htc_endpoint_id ep_id);
 void ath9k_htc_txep(void *priv, struct sk_buff *skb, enum htc_endpoint_id ep_id,
 		    bool txok);
+void ath9k_htc_beaconep(void *drv_priv, struct sk_buff *skb,
+			enum htc_endpoint_id ep_id, bool txok);
 
 void ath9k_htc_station_work(struct work_struct *work);
 void ath9k_htc_aggr_work(struct work_struct *work);
diff --git a/drivers/net/wireless/ath/ath9k/htc_drv_beacon.c b/drivers/net/wireless/ath/ath9k/htc_drv_beacon.c
index 7cb55f5b071..c10c7d002eb 100644
--- a/drivers/net/wireless/ath/ath9k/htc_drv_beacon.c
+++ b/drivers/net/wireless/ath/ath9k/htc_drv_beacon.c
@@ -165,22 +165,10 @@ static void ath9k_htc_beacon_config_adhoc(struct ath9k_htc_priv *priv,
 	WMI_CMD_BUF(WMI_ENABLE_INTR_CMDID, &htc_imask);
 }
 
-void ath9k_htc_beacon_update(struct ath9k_htc_priv *priv,
-			     struct ieee80211_vif *vif)
+void ath9k_htc_beaconep(void *drv_priv, struct sk_buff *skb,
+			enum htc_endpoint_id ep_id, bool txok)
 {
-	struct ath_common *common = ath9k_hw_common(priv->ah);
-
-	spin_lock_bh(&priv->beacon_lock);
-
-	if (priv->beacon)
-		dev_kfree_skb_any(priv->beacon);
-
-	priv->beacon = ieee80211_beacon_get(priv->hw, vif);
-	if (!priv->beacon)
-		ath_print(common, ATH_DBG_BEACON,
-			  "Unable to allocate beacon\n");
-
-	spin_unlock_bh(&priv->beacon_lock);
+	dev_kfree_skb_any(skb);
 }
 
 void ath9k_htc_swba(struct ath9k_htc_priv *priv, u8 beacon_pending)
@@ -189,6 +177,7 @@ void ath9k_htc_swba(struct ath9k_htc_priv *priv, u8 beacon_pending)
 	struct tx_beacon_header beacon_hdr;
 	struct ath9k_htc_tx_ctl tx_ctl;
 	struct ieee80211_tx_info *info;
+	struct sk_buff *beacon;
 	u8 *tx_fhdr;
 
 	memset(&beacon_hdr, 0, sizeof(struct tx_beacon_header));
@@ -207,25 +196,17 @@ void ath9k_htc_swba(struct ath9k_htc_priv *priv, u8 beacon_pending)
 		return;
 	}
 
-	if (unlikely(priv->beacon == NULL)) {
-		spin_unlock_bh(&priv->beacon_lock);
-		return;
-	}
-
-	/* Free the old SKB first */
-	dev_kfree_skb_any(priv->beacon);
-
 	/* Get a new beacon */
-	priv->beacon = ieee80211_beacon_get(priv->hw, priv->vif);
-	if (!priv->beacon) {
+	beacon = ieee80211_beacon_get(priv->hw, priv->vif);
+	if (!beacon) {
 		spin_unlock_bh(&priv->beacon_lock);
 		return;
 	}
 
-	info = IEEE80211_SKB_CB(priv->beacon);
+	info = IEEE80211_SKB_CB(beacon);
 	if (info->flags & IEEE80211_TX_CTL_ASSIGN_SEQ) {
 		struct ieee80211_hdr *hdr =
-			(struct ieee80211_hdr *) priv->beacon->data;
+			(struct ieee80211_hdr *) beacon->data;
 		priv->seq_no += 0x10;
 		hdr->seq_ctrl &= cpu_to_le16(IEEE80211_SCTL_FRAG);
 		hdr->seq_ctrl |= cpu_to_le16(priv->seq_no);
@@ -233,10 +214,10 @@ void ath9k_htc_swba(struct ath9k_htc_priv *priv, u8 beacon_pending)
 
 	tx_ctl.type = ATH9K_HTC_NORMAL;
 	beacon_hdr.vif_index = avp->index;
-	tx_fhdr = skb_push(priv->beacon, sizeof(beacon_hdr));
+	tx_fhdr = skb_push(beacon, sizeof(beacon_hdr));
 	memcpy(tx_fhdr, (u8 *) &beacon_hdr, sizeof(beacon_hdr));
 
-	htc_send(priv->htc, priv->beacon, priv->beacon_ep, &tx_ctl);
+	htc_send(priv->htc, beacon, priv->beacon_ep, &tx_ctl);
 
 	spin_unlock_bh(&priv->beacon_lock);
 }
diff --git a/drivers/net/wireless/ath/ath9k/htc_drv_init.c b/drivers/net/wireless/ath/ath9k/htc_drv_init.c
index 701f2ef5a44..17111fc1d2c 100644
--- a/drivers/net/wireless/ath/ath9k/htc_drv_init.c
+++ b/drivers/net/wireless/ath/ath9k/htc_drv_init.c
@@ -144,7 +144,7 @@ static int ath9k_init_htc_services(struct ath9k_htc_priv *priv)
 		goto err;
 
 	/* Beacon */
-	ret = ath9k_htc_connect_svc(priv, WMI_BEACON_SVC, NULL,
+	ret = ath9k_htc_connect_svc(priv, WMI_BEACON_SVC, ath9k_htc_beaconep,
 				    &priv->beacon_ep);
 	if (ret)
 		goto err;
diff --git a/drivers/net/wireless/ath/ath9k/htc_drv_main.c b/drivers/net/wireless/ath/ath9k/htc_drv_main.c
index ca7f3a78eb1..7c9e33ba95a 100644
--- a/drivers/net/wireless/ath/ath9k/htc_drv_main.c
+++ b/drivers/net/wireless/ath/ath9k/htc_drv_main.c
@@ -1313,15 +1313,6 @@ static void ath9k_htc_remove_interface(struct ieee80211_hw *hw,
 	priv->nvifs--;
 
 	ath9k_htc_remove_station(priv, vif, NULL);
-
-	if (vif->type == NL80211_IFTYPE_ADHOC) {
-		spin_lock_bh(&priv->beacon_lock);
-		if (priv->beacon)
-			dev_kfree_skb_any(priv->beacon);
-		priv->beacon = NULL;
-		spin_unlock_bh(&priv->beacon_lock);
-	}
-
 	priv->vif = NULL;
 
 	mutex_unlock(&priv->mutex);
@@ -1590,9 +1581,6 @@ static void ath9k_htc_bss_info_changed(struct ieee80211_hw *hw,
 		ath9k_htc_beacon_config(priv, vif);
 	}
 
-	if (changed & BSS_CHANGED_BEACON)
-		ath9k_htc_beacon_update(priv, vif);
-
 	if ((changed & BSS_CHANGED_BEACON_ENABLED) &&
 	    !bss_conf->enable_beacon) {
 		priv->op_flags &= ~OP_ENABLE_BEACON;
-- 
cgit v1.2.3-70-g09d2


From a21c2ab4210a89a71a0a99685acf16ae126b2eee Mon Sep 17 00:00:00 2001
From: Helmut Schaa <helmut.schaa@googlemail.com>
Date: Thu, 6 May 2010 12:29:04 +0200
Subject: rt2x00: rt2800: update initial SIFS values

Currently the CCK and OFDM SIFS value is set to 32us. This value is neither
used by the Ralink driver nor specified in 802.11.

Instead of using 10us for CCK SIFS (as defined in 802.11) use 16us like in the
Ralink drivers. And indeed using a SIFS value of 10us breaks connectivity with
11g + CTS protected connections. Add a comment to the code why we don't use 10us
for CCK SIFS value.

The OFDM SIFS value is set to 16us (as defined in 802.11 and also used by the
Ralink drivers).

Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com>
Acked-by: Ivo van Doorn <IvDoorn@gmail.com>
Acked-by: Gertjan van Wingerde <gwingerde@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/rt2x00/rt2800lib.c | 11 +++++++++--
 1 file changed, 9 insertions(+), 2 deletions(-)

(limited to 'drivers/net/wireless')

diff --git a/drivers/net/wireless/rt2x00/rt2800lib.c b/drivers/net/wireless/rt2x00/rt2800lib.c
index 6d2c66d9b29..11a0d8b6235 100644
--- a/drivers/net/wireless/rt2x00/rt2800lib.c
+++ b/drivers/net/wireless/rt2x00/rt2800lib.c
@@ -1414,9 +1414,16 @@ int rt2800_init_registers(struct rt2x00_dev *rt2x00dev)
 
 	rt2800_register_write(rt2x00dev, EXP_ACK_TIME, 0x002400ca);
 
+	/*
+	 * Usually the CCK SIFS time should be set to 10 and the OFDM SIFS
+	 * time should be set to 16. However, the original Ralink driver uses
+	 * 16 for both and indeed using a value of 10 for CCK SIFS results in
+	 * connection problems with 11g + CTS protection. Hence, use the same
+	 * defaults as the Ralink driver: 16 for both, CCK and OFDM SIFS.
+	 */
 	rt2800_register_read(rt2x00dev, XIFS_TIME_CFG, &reg);
-	rt2x00_set_field32(&reg, XIFS_TIME_CFG_CCKM_SIFS_TIME, 32);
-	rt2x00_set_field32(&reg, XIFS_TIME_CFG_OFDM_SIFS_TIME, 32);
+	rt2x00_set_field32(&reg, XIFS_TIME_CFG_CCKM_SIFS_TIME, 16);
+	rt2x00_set_field32(&reg, XIFS_TIME_CFG_OFDM_SIFS_TIME, 16);
 	rt2x00_set_field32(&reg, XIFS_TIME_CFG_OFDM_XIFS_TIME, 4);
 	rt2x00_set_field32(&reg, XIFS_TIME_CFG_EIFS, 314);
 	rt2x00_set_field32(&reg, XIFS_TIME_CFG_BB_RXEND_ENABLE, 1);
-- 
cgit v1.2.3-70-g09d2


From 809bfe81ce225d1f5a111840c3d9e30704d98478 Mon Sep 17 00:00:00 2001
From: Helmut Schaa <helmut.schaa@googlemail.com>
Date: Thu, 6 May 2010 12:29:44 +0200
Subject: rt2x00: rt2800: don't overwrite SIFS values on erp changes

The SIFS value is a constant and doesn't need to be updated on erp changes.
Furthermore the code used 10us for both, the OFDM SIFS and CCK SIFS time
which broke CTS protected 11g connections (see patch "rt2x00: rt2800: update
initial SIFS values" for details).

Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com>
Acked-by: Ivo van Doorn <IvDoorn@gmail.com>
Acked-by: Gertjan van Wingerde <gwingerde@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/rt2x00/rt2800lib.c | 2 --
 1 file changed, 2 deletions(-)

(limited to 'drivers/net/wireless')

diff --git a/drivers/net/wireless/rt2x00/rt2800lib.c b/drivers/net/wireless/rt2x00/rt2800lib.c
index 11a0d8b6235..b110368c00e 100644
--- a/drivers/net/wireless/rt2x00/rt2800lib.c
+++ b/drivers/net/wireless/rt2x00/rt2800lib.c
@@ -639,8 +639,6 @@ void rt2800_config_erp(struct rt2x00_dev *rt2x00dev, struct rt2x00lib_erp *erp)
 	rt2800_register_write(rt2x00dev, BKOFF_SLOT_CFG, reg);
 
 	rt2800_register_read(rt2x00dev, XIFS_TIME_CFG, &reg);
-	rt2x00_set_field32(&reg, XIFS_TIME_CFG_CCKM_SIFS_TIME, erp->sifs);
-	rt2x00_set_field32(&reg, XIFS_TIME_CFG_OFDM_SIFS_TIME, erp->sifs);
 	rt2x00_set_field32(&reg, XIFS_TIME_CFG_EIFS, erp->eifs);
 	rt2800_register_write(rt2x00dev, XIFS_TIME_CFG, reg);
 
-- 
cgit v1.2.3-70-g09d2


From 55f9321a024a2d03f71a23b74003792692ca1a38 Mon Sep 17 00:00:00 2001
From: Ivo van Doorn <ivdoorn@gmail.com>
Date: Thu, 6 May 2010 14:45:46 +0200
Subject: rt2x00: Fix RF3052 channel initialization

Update channel initialization for the RF3052 chipset.
According to the Ralink drivers, the rt3x array must be
used for this chipset, rather then the rt2x array.

Furthermore RF3052 supports the 5GHz band, extend
the rt3x array with the 5GHz channels, and use them
for the RF3052 chip.

Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
Acked-by: Gertjan van Wingerde <gwingerde@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/rt2x00/rt2800lib.c | 67 ++++++++++++++++++++++++++++-----
 1 file changed, 58 insertions(+), 9 deletions(-)

(limited to 'drivers/net/wireless')

diff --git a/drivers/net/wireless/rt2x00/rt2800lib.c b/drivers/net/wireless/rt2x00/rt2800lib.c
index b110368c00e..525267d4cc3 100644
--- a/drivers/net/wireless/rt2x00/rt2800lib.c
+++ b/drivers/net/wireless/rt2x00/rt2800lib.c
@@ -2223,7 +2223,7 @@ int rt2800_init_eeprom(struct rt2x00_dev *rt2x00dev)
 EXPORT_SYMBOL_GPL(rt2800_init_eeprom);
 
 /*
- * RF value list for rt28x0
+ * RF value list for rt28xx
  * Supports: 2.4 GHz (all) & 5.2 GHz (RF2850 & RF2750)
  */
 static const struct rf_channel rf_vals[] = {
@@ -2298,10 +2298,10 @@ static const struct rf_channel rf_vals[] = {
 };
 
 /*
- * RF value list for rt3070
- * Supports: 2.4 GHz
+ * RF value list for rt3xxx
+ * Supports: 2.4 GHz (all) & 5.2 GHz (RF3052)
  */
-static const struct rf_channel rf_vals_302x[] = {
+static const struct rf_channel rf_vals_3x[] = {
 	{1,  241, 2, 2 },
 	{2,  241, 2, 7 },
 	{3,  242, 2, 2 },
@@ -2316,6 +2316,51 @@ static const struct rf_channel rf_vals_302x[] = {
 	{12, 246, 2, 7 },
 	{13, 247, 2, 2 },
 	{14, 248, 2, 4 },
+
+	/* 802.11 UNI / HyperLan 2 */
+	{36, 0x56, 0, 4},
+	{38, 0x56, 0, 6},
+	{40, 0x56, 0, 8},
+	{44, 0x57, 0, 0},
+	{46, 0x57, 0, 2},
+	{48, 0x57, 0, 4},
+	{52, 0x57, 0, 8},
+	{54, 0x57, 0, 10},
+	{56, 0x58, 0, 0},
+	{60, 0x58, 0, 4},
+	{62, 0x58, 0, 6},
+	{64, 0x58, 0, 8},
+
+	/* 802.11 HyperLan 2 */
+	{100, 0x5b, 0, 8},
+	{102, 0x5b, 0, 10},
+	{104, 0x5c, 0, 0},
+	{108, 0x5c, 0, 4},
+	{110, 0x5c, 0, 6},
+	{112, 0x5c, 0, 8},
+	{116, 0x5d, 0, 0},
+	{118, 0x5d, 0, 2},
+	{120, 0x5d, 0, 4},
+	{124, 0x5d, 0, 8},
+	{126, 0x5d, 0, 10},
+	{128, 0x5e, 0, 0},
+	{132, 0x5e, 0, 4},
+	{134, 0x5e, 0, 6},
+	{136, 0x5e, 0, 8},
+	{140, 0x5f, 0, 0},
+
+	/* 802.11 UNII */
+	{149, 0x5f, 0, 9},
+	{151, 0x5f, 0, 11},
+	{153, 0x60, 0, 1},
+	{157, 0x60, 0, 5},
+	{159, 0x60, 0, 7},
+	{161, 0x60, 0, 9},
+	{165, 0x61, 0, 1},
+	{167, 0x61, 0, 3},
+	{169, 0x61, 0, 5},
+	{171, 0x61, 0, 7},
+	{173, 0x61, 0, 9},
 };
 
 int rt2800_probe_hw_mode(struct rt2x00_dev *rt2x00dev)
@@ -2356,11 +2401,11 @@ int rt2800_probe_hw_mode(struct rt2x00_dev *rt2x00dev)
 	spec->supported_rates = SUPPORT_RATE_CCK | SUPPORT_RATE_OFDM;
 
 	if (rt2x00_rf(rt2x00dev, RF2820) ||
-	    rt2x00_rf(rt2x00dev, RF2720) ||
-	    rt2x00_rf(rt2x00dev, RF3052)) {
+	    rt2x00_rf(rt2x00dev, RF2720)) {
 		spec->num_channels = 14;
 		spec->channels = rf_vals;
-	} else if (rt2x00_rf(rt2x00dev, RF2850) || rt2x00_rf(rt2x00dev, RF2750)) {
+	} else if (rt2x00_rf(rt2x00dev, RF2850) ||
+		   rt2x00_rf(rt2x00dev, RF2750)) {
 		spec->supported_bands |= SUPPORT_BAND_5GHZ;
 		spec->num_channels = ARRAY_SIZE(rf_vals);
 		spec->channels = rf_vals;
@@ -2368,8 +2413,12 @@ int rt2800_probe_hw_mode(struct rt2x00_dev *rt2x00dev)
 		   rt2x00_rf(rt2x00dev, RF2020) ||
 		   rt2x00_rf(rt2x00dev, RF3021) ||
 		   rt2x00_rf(rt2x00dev, RF3022)) {
-		spec->num_channels = ARRAY_SIZE(rf_vals_302x);
-		spec->channels = rf_vals_302x;
+		spec->num_channels = 14;
+		spec->channels = rf_vals_3x;
+	} else if (rt2x00_rf(rt2x00dev, RF3052)) {
+		spec->supported_bands |= SUPPORT_BAND_5GHZ;
+		spec->num_channels = ARRAY_SIZE(rf_vals_3x);
+		spec->channels = rf_vals_3x;
 	}
 
 	/*
-- 
cgit v1.2.3-70-g09d2


From 51e080deba57437459571f26a3c6f3db03324c4c Mon Sep 17 00:00:00 2001
From: "John W. Linville" <linville@tuxdriver.com>
Date: Thu, 6 May 2010 16:26:23 -0400
Subject: rtl8180: assign sequence numbers in the driver

This is a step towards support for beaconing modes of operation.

Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/rtl818x/rtl8180.h     |  3 +++
 drivers/net/wireless/rtl818x/rtl8180_dev.c | 10 ++++++++++
 2 files changed, 13 insertions(+)

(limited to 'drivers/net/wireless')

diff --git a/drivers/net/wireless/rtl818x/rtl8180.h b/drivers/net/wireless/rtl818x/rtl8180.h
index de3844fe06d..b92d678abc0 100644
--- a/drivers/net/wireless/rtl818x/rtl8180.h
+++ b/drivers/net/wireless/rtl818x/rtl8180.h
@@ -78,6 +78,9 @@ struct rtl8180_priv {
 	u32 anaparam;
 	u16 rfparam;
 	u8 csthreshold;
+
+	/* sequence # */
+	u16 seqno;
 };
 
 void rtl8180_write_phy(struct ieee80211_hw *dev, u8 addr, u32 data);
diff --git a/drivers/net/wireless/rtl818x/rtl8180_dev.c b/drivers/net/wireless/rtl818x/rtl8180_dev.c
index 093b93d62cc..3a214d7507a 100644
--- a/drivers/net/wireless/rtl818x/rtl8180_dev.c
+++ b/drivers/net/wireless/rtl818x/rtl8180_dev.c
@@ -233,6 +233,7 @@ static irqreturn_t rtl8180_interrupt(int irq, void *dev_id)
 static int rtl8180_tx(struct ieee80211_hw *dev, struct sk_buff *skb)
 {
 	struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
+	struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)skb->data;
 	struct rtl8180_priv *priv = dev->priv;
 	struct rtl8180_tx_ring *ring;
 	struct rtl8180_tx_desc *entry;
@@ -284,6 +285,14 @@ static int rtl8180_tx(struct ieee80211_hw *dev, struct sk_buff *skb)
 	}
 
 	spin_lock_irqsave(&priv->lock, flags);
+
+	if (info->flags & IEEE80211_TX_CTL_ASSIGN_SEQ) {
+		if (info->flags & IEEE80211_TX_CTL_FIRST_FRAGMENT)
+			priv->seqno += 0x10;
+		hdr->seq_ctrl &= cpu_to_le16(IEEE80211_SCTL_FRAG);
+		hdr->seq_ctrl |= cpu_to_le16(priv->seqno);
+	}
+
 	idx = (ring->idx + skb_queue_len(&ring->queue)) % ring->entries;
 	entry = &ring->desc[idx];
 
@@ -298,6 +307,7 @@ static int rtl8180_tx(struct ieee80211_hw *dev, struct sk_buff *skb)
 	__skb_queue_tail(&ring->queue, skb);
 	if (ring->entries - skb_queue_len(&ring->queue) < 2)
 		ieee80211_stop_queue(dev, prio);
+
 	spin_unlock_irqrestore(&priv->lock, flags);
 
 	rtl818x_iowrite8(priv, &priv->map->TX_DMA_POLLING, (1 << (prio + 4)));
-- 
cgit v1.2.3-70-g09d2


From c809e86c11a64488acc85ddf12ece3c9b879ccb6 Mon Sep 17 00:00:00 2001
From: "John W. Linville" <linville@tuxdriver.com>
Date: Thu, 6 May 2010 16:49:40 -0400
Subject: rtl8180: add software-based support for IBSS mode

Device documentation suggests that hardware support for beaconing
is available.  But I implemented software-based beacon generation
as an experiment and it seems better to have that working now rather
than waiting for something better to materialize.

Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/rtl818x/rtl8180.h     |  8 +++
 drivers/net/wireless/rtl818x/rtl8180_dev.c | 82 ++++++++++++++++++++++++++----
 2 files changed, 80 insertions(+), 10 deletions(-)

(limited to 'drivers/net/wireless')

diff --git a/drivers/net/wireless/rtl818x/rtl8180.h b/drivers/net/wireless/rtl818x/rtl8180.h
index b92d678abc0..4baf0cf0826 100644
--- a/drivers/net/wireless/rtl818x/rtl8180.h
+++ b/drivers/net/wireless/rtl818x/rtl8180.h
@@ -55,6 +55,14 @@ struct rtl8180_tx_ring {
 	struct sk_buff_head queue;
 };
 
+struct rtl8180_vif {
+	struct ieee80211_hw *dev;
+
+	/* beaconing */
+	struct delayed_work beacon_work;
+	bool enable_beacon;
+};
+
 struct rtl8180_priv {
 	/* common between rtl818x drivers */
 	struct rtl818x_csr __iomem *map;
diff --git a/drivers/net/wireless/rtl818x/rtl8180_dev.c b/drivers/net/wireless/rtl818x/rtl8180_dev.c
index 3a214d7507a..cbdc5cfec90 100644
--- a/drivers/net/wireless/rtl818x/rtl8180_dev.c
+++ b/drivers/net/wireless/rtl818x/rtl8180_dev.c
@@ -662,10 +662,59 @@ static void rtl8180_stop(struct ieee80211_hw *dev)
 		rtl8180_free_tx_ring(dev, i);
 }
 
+static u64 rtl8180_get_tsf(struct ieee80211_hw *dev)
+{
+	struct rtl8180_priv *priv = dev->priv;
+
+	return rtl818x_ioread32(priv, &priv->map->TSFT[0]) |
+	       (u64)(rtl818x_ioread32(priv, &priv->map->TSFT[1])) << 32;
+}
+
+void rtl8180_beacon_work(struct work_struct *work)
+{
+	struct rtl8180_vif *vif_priv =
+		container_of(work, struct rtl8180_vif, beacon_work.work);
+	struct ieee80211_vif *vif =
+		container_of((void *)vif_priv, struct ieee80211_vif, drv_priv);
+	struct ieee80211_hw *dev = vif_priv->dev;
+	struct ieee80211_mgmt *mgmt;
+	struct sk_buff *skb;
+	int err = 0;
+
+	/* don't overflow the tx ring */
+	if (ieee80211_queue_stopped(dev, 0))
+		goto resched;
+
+	/* grab a fresh beacon */
+	skb = ieee80211_beacon_get(dev, vif);
+
+	/*
+	 * update beacon timestamp w/ TSF value
+	 * TODO: make hardware update beacon timestamp
+	 */
+	mgmt = (struct ieee80211_mgmt *)skb->data;
+	mgmt->u.beacon.timestamp = cpu_to_le64(rtl8180_get_tsf(dev));
+
+	/* TODO: use actual beacon queue */
+	skb_set_queue_mapping(skb, 0);
+
+	err = rtl8180_tx(dev, skb);
+	WARN_ON(err);
+
+resched:
+	/*
+	 * schedule next beacon
+	 * TODO: use hardware support for beacon timing
+	 */
+	schedule_delayed_work(&vif_priv->beacon_work,
+			usecs_to_jiffies(1024 * vif->bss_conf.beacon_int));
+}
+
 static int rtl8180_add_interface(struct ieee80211_hw *dev,
 				 struct ieee80211_vif *vif)
 {
 	struct rtl8180_priv *priv = dev->priv;
+	struct rtl8180_vif *vif_priv;
 
 	/*
 	 * We only support one active interface at a time.
@@ -675,6 +724,7 @@ static int rtl8180_add_interface(struct ieee80211_hw *dev,
 
 	switch (vif->type) {
 	case NL80211_IFTYPE_STATION:
+	case NL80211_IFTYPE_ADHOC:
 		break;
 	default:
 		return -EOPNOTSUPP;
@@ -682,6 +732,12 @@ static int rtl8180_add_interface(struct ieee80211_hw *dev,
 
 	priv->vif = vif;
 
+	/* Initialize driver private area */
+	vif_priv = (struct rtl8180_vif *)&vif->drv_priv;
+	vif_priv->dev = dev;
+	INIT_DELAYED_WORK(&vif_priv->beacon_work, rtl8180_beacon_work);
+	vif_priv->enable_beacon = false;
+
 	rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, RTL818X_EEPROM_CMD_CONFIG);
 	rtl818x_iowrite32(priv, (__le32 __iomem *)&priv->map->MAC[0],
 			  le32_to_cpu(*(__le32 *)vif->addr));
@@ -715,8 +771,11 @@ static void rtl8180_bss_info_changed(struct ieee80211_hw *dev,
 				     u32 changed)
 {
 	struct rtl8180_priv *priv = dev->priv;
+	struct rtl8180_vif *vif_priv;
 	int i;
 
+	vif_priv = (struct rtl8180_vif *)&vif->drv_priv;
+
 	if (changed & BSS_CHANGED_BSSID) {
 		for (i = 0; i < ETH_ALEN; i++)
 			rtl818x_iowrite8(priv, &priv->map->BSSID[i],
@@ -731,7 +790,16 @@ static void rtl8180_bss_info_changed(struct ieee80211_hw *dev,
 	}
 
 	if (changed & BSS_CHANGED_ERP_SLOT && priv->rf->conf_erp)
-	        priv->rf->conf_erp(dev, info);
+		priv->rf->conf_erp(dev, info);
+
+	if (changed & BSS_CHANGED_BEACON_ENABLED)
+		vif_priv->enable_beacon = info->enable_beacon;
+
+	if (changed & (BSS_CHANGED_BEACON_ENABLED | BSS_CHANGED_BEACON)) {
+		cancel_delayed_work_sync(&vif_priv->beacon_work);
+		if (vif_priv->enable_beacon)
+			schedule_work(&vif_priv->beacon_work.work);
+	}
 }
 
 static u64 rtl8180_prepare_multicast(struct ieee80211_hw *dev, int mc_count,
@@ -772,14 +840,6 @@ static void rtl8180_configure_filter(struct ieee80211_hw *dev,
 	rtl818x_iowrite32(priv, &priv->map->RX_CONF, priv->rx_conf);
 }
 
-static u64 rtl8180_get_tsf(struct ieee80211_hw *dev)
-{
-	struct rtl8180_priv *priv = dev->priv;
-
-	return rtl818x_ioread32(priv, &priv->map->TSFT[0]) |
-	       (u64)(rtl818x_ioread32(priv, &priv->map->TSFT[1])) << 32;
-}
-
 static const struct ieee80211_ops rtl8180_ops = {
 	.tx			= rtl8180_tx,
 	.start			= rtl8180_start,
@@ -916,7 +976,9 @@ static int __devinit rtl8180_probe(struct pci_dev *pdev,
 	dev->flags = IEEE80211_HW_HOST_BROADCAST_PS_BUFFERING |
 		     IEEE80211_HW_RX_INCLUDES_FCS |
 		     IEEE80211_HW_SIGNAL_UNSPEC;
-	dev->wiphy->interface_modes = BIT(NL80211_IFTYPE_STATION);
+	dev->vif_data_size = sizeof(struct rtl8180_vif);
+	dev->wiphy->interface_modes = BIT(NL80211_IFTYPE_STATION) |
+					BIT(NL80211_IFTYPE_ADHOC);
 	dev->queues = 1;
 	dev->max_signal = 65;
 
-- 
cgit v1.2.3-70-g09d2


From 8e1559949928d4d8bfe044bfcf57879faff82e19 Mon Sep 17 00:00:00 2001
From: "Luis R. Rodriguez" <lrodriguez@atheros.com>
Date: Thu, 6 May 2010 22:41:12 -0400
Subject: ath9k_common: move the rate status setting into ath9k_process_rate()

This has no real functional change, this just moves the setting the
the mac80211 rate index into ath9k_process_rate(). This allows us
to eventually make ath9k_process_rate() return a negative value
in case we have detected a specific case rate situation which should
have been ignored.

Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/ath/ath9k/common.c | 40 ++++++++++++++++++++++-----------
 1 file changed, 27 insertions(+), 13 deletions(-)

(limited to 'drivers/net/wireless')

diff --git a/drivers/net/wireless/ath/ath9k/common.c b/drivers/net/wireless/ath/ath9k/common.c
index 579e15fb414..254dcbdbc06 100644
--- a/drivers/net/wireless/ath/ath9k/common.c
+++ b/drivers/net/wireless/ath/ath9k/common.c
@@ -108,11 +108,11 @@ static bool ath9k_rx_accept(struct ath_common *common,
 	return true;
 }
 
-static u8 ath9k_process_rate(struct ath_common *common,
-			     struct ieee80211_hw *hw,
-			     struct ath_rx_status *rx_stats,
-			     struct ieee80211_rx_status *rxs,
-			     struct sk_buff *skb)
+static int ath9k_process_rate(struct ath_common *common,
+			      struct ieee80211_hw *hw,
+			      struct ath_rx_status *rx_stats,
+			      struct ieee80211_rx_status *rxs,
+			      struct sk_buff *skb)
 {
 	struct ieee80211_supported_band *sband;
 	enum ieee80211_band band;
@@ -128,25 +128,33 @@ static u8 ath9k_process_rate(struct ath_common *common,
 			rxs->flag |= RX_FLAG_40MHZ;
 		if (rx_stats->rs_flags & ATH9K_RX_GI)
 			rxs->flag |= RX_FLAG_SHORT_GI;
-		return rx_stats->rs_rate & 0x7f;
+		rxs->rate_idx = rx_stats->rs_rate & 0x7f;
+		return 0;
 	}
 
 	for (i = 0; i < sband->n_bitrates; i++) {
-		if (sband->bitrates[i].hw_value == rx_stats->rs_rate)
-			return i;
+		if (sband->bitrates[i].hw_value == rx_stats->rs_rate) {
+			rxs->rate_idx = i;
+			return 0;
+		}
 		if (sband->bitrates[i].hw_value_short == rx_stats->rs_rate) {
 			rxs->flag |= RX_FLAG_SHORTPRE;
-			return i;
+			rxs->rate_idx = i;
+			return 0;
 		}
 	}
 
-	/* No valid hardware bitrate found -- we should not get here */
+	/*
+	 * No valid hardware bitrate found -- we should not get here
+	 * because hardware has already validated this frame as OK.
+	 */
 	ath_print(common, ATH_DBG_XMIT, "unsupported hw bitrate detected "
 		  "0x%02x using 1 Mbit\n", rx_stats->rs_rate);
 	if ((common->debug_mask & ATH_DBG_XMIT))
 		print_hex_dump_bytes("", DUMP_PREFIX_NONE, skb->data, skb->len);
 
-        return 0;
+	rxs->rate_idx = 0;
+	return 0;
 }
 
 static void ath9k_process_rssi(struct ath_common *common,
@@ -208,13 +216,19 @@ int ath9k_cmn_rx_skb_preprocess(struct ath_common *common,
 	struct ath_hw *ah = common->ah;
 
 	memset(rx_status, 0, sizeof(struct ieee80211_rx_status));
+
+	/*
+	 * everything but the rate is checked here, the rate check is done
+	 * separately to avoid doing two lookups for a rate for each frame.
+	 */
 	if (!ath9k_rx_accept(common, skb, rx_status, rx_stats, decrypt_error))
 		return -EINVAL;
 
 	ath9k_process_rssi(common, hw, skb, rx_stats);
 
-	rx_status->rate_idx = ath9k_process_rate(common, hw,
-						 rx_stats, rx_status, skb);
+	if (ath9k_process_rate(common, hw, rx_stats, rx_status, skb))
+		return -EINVAL;
+
 	rx_status->mactime = ath9k_hw_extend_tsf(ah, rx_stats->rs_tstamp);
 	rx_status->band = hw->conf.channel->band;
 	rx_status->freq = hw->conf.channel->center_freq;
-- 
cgit v1.2.3-70-g09d2


From 6f256de70b90aecbb550a2df387684ed2136b792 Mon Sep 17 00:00:00 2001
From: "Luis R. Rodriguez" <lrodriguez@atheros.com>
Date: Thu, 6 May 2010 22:41:13 -0400
Subject: ath9k_common: drop incomming frames with an invalid hardware rate

ath9k_common (used by ath9k and ath9k_htc) trusts the frames
blessed by hardware as OK are infact correct even if the rate
seen by the driver is unrecognized. ath9k_common just treats
these frames in mac80211 as frames as frames under 1 mbps rate.
It seems this might not be the best thing to do as other parts of
the frame might not be valid so just drop these frames for now.

Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/ath/ath9k/common.c | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

(limited to 'drivers/net/wireless')

diff --git a/drivers/net/wireless/ath/ath9k/common.c b/drivers/net/wireless/ath/ath9k/common.c
index 254dcbdbc06..7707341cd0d 100644
--- a/drivers/net/wireless/ath/ath9k/common.c
+++ b/drivers/net/wireless/ath/ath9k/common.c
@@ -153,8 +153,7 @@ static int ath9k_process_rate(struct ath_common *common,
 	if ((common->debug_mask & ATH_DBG_XMIT))
 		print_hex_dump_bytes("", DUMP_PREFIX_NONE, skb->data, skb->len);
 
-	rxs->rate_idx = 0;
-	return 0;
+	return -EINVAL;
 }
 
 static void ath9k_process_rssi(struct ath_common *common,
-- 
cgit v1.2.3-70-g09d2


From bc6fb35644ee46725f51ef27e901bd5d7e52c101 Mon Sep 17 00:00:00 2001
From: "Luis R. Rodriguez" <lrodriguez@atheros.com>
Date: Thu, 6 May 2010 22:41:14 -0400
Subject: ath9k_hw: Update initvals for AR9003 for xb113

Generated using the new shiny intivals-tool [1]:

initvals -w -f ar9003 > ar9003_initvals.h

The respective checksums are:

0x000000005a76829d        ar9300_2p0_radio_postamble
0x000000009d90cb74        ar9300Modes_lowest_ob_db_tx_gain_table_2p0
0x00000000e0bc2c84        ar9300Modes_fast_clock_2p0
0x00000000852fca34        ar9300_2p0_radio_core
0x0000000000000000        ar9300Common_rx_gain_table_merlin_2p0
0x0000000078658fb5        ar9300_2p0_mac_postamble
0x0000000023235333        ar9300_2p0_soc_postamble
0x0000000054d41904        ar9200_merlin_2p0_radio_core
0x00000000618455d4        ar9300_2p0_baseband_postamble
0x000000009aa590a4        ar9300_2p0_baseband_core
0x000000004783d946        ar9300Modes_high_power_tx_gain_table_2p0
0x000000006681db44        ar9300Modes_high_ob_db_tx_gain_table_2p0
0x000000001f318700        ar9300Common_rx_gain_table_2p0
0x000000009990cb74        ar9300Modes_low_ob_db_tx_gain_table_2p0
0x00000000c9d66d40        ar9300_2p0_mac_core
0x0000000039139500        ar9300Common_wo_xlna_rx_gain_table_2p0
0x00000000a0c54980        ar9300_2p0_soc_preamble
0x00000000292e2544        ar9300PciePhy_pll_on_clkreq_disable_L1_2p0
0x000000002d3e2544        ar9300PciePhy_clkreq_enable_L1_2p0
0x00000000293e2544        ar9300PciePhy_clkreq_disable_L1_2p0

[1] http://wireless.kernel.org/en/users/Drivers/ath9k_hw/initvals-tool

Cc: Tom Hammel <thammel@atheros.com>
Cc: Enis Akay <Enis.Akay@Atheros.com>
Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/ath/ath9k/ar9003_initvals.h | 204 +++++++++++------------
 1 file changed, 102 insertions(+), 102 deletions(-)

(limited to 'drivers/net/wireless')

diff --git a/drivers/net/wireless/ath/ath9k/ar9003_initvals.h b/drivers/net/wireless/ath/ath9k/ar9003_initvals.h
index a131cd10ef2..ef6116e1303 100644
--- a/drivers/net/wireless/ath/ath9k/ar9003_initvals.h
+++ b/drivers/net/wireless/ath/ath9k/ar9003_initvals.h
@@ -541,7 +541,7 @@ static const u32 ar9300_2p0_mac_postamble[][5] = {
 
 static const u32 ar9300_2p0_soc_postamble[][5] = {
 	/* Addr      5G_HT20     5G_HT40     2G_HT40     2G_HT20   */
-	{0x00007010, 0x00000023, 0x00000023, 0x00000022, 0x00000022},
+	{0x00007010, 0x00000023, 0x00000023, 0x00000023, 0x00000023},
 };
 
 static const u32 ar9200_merlin_2p0_radio_core[][2] = {
@@ -588,12 +588,12 @@ static const u32 ar9200_merlin_2p0_radio_core[][2] = {
 
 static const u32 ar9300_2p0_baseband_postamble[][5] = {
 	/* Addr      5G_HT20     5G_HT40     2G_HT40     2G_HT20   */
-	{0x00009810, 0xd00a8005, 0xd00a8005, 0xd00a8005, 0xd00a8005},
+	{0x00009810, 0xd00a8005, 0xd00a8005, 0xd00a8005, 0xd00a800b},
 	{0x00009820, 0x206a022e, 0x206a022e, 0x206a012e, 0x206a012e},
 	{0x00009824, 0x5ac640d0, 0x5ac640d0, 0x5ac640d0, 0x5ac640d0},
 	{0x00009828, 0x06903081, 0x06903081, 0x06903881, 0x06903881},
 	{0x0000982c, 0x05eea6d4, 0x05eea6d4, 0x05eea6d4, 0x05eea6d4},
-	{0x00009830, 0x0000059c, 0x0000059c, 0x0000059c, 0x0000059c},
+	{0x00009830, 0x0000059c, 0x0000059c, 0x0000059c, 0x00000b9c},
 	{0x00009c00, 0x00000044, 0x000000c4, 0x000000c4, 0x00000044},
 	{0x00009e00, 0x0372161e, 0x0372161e, 0x037216a0, 0x037216a0},
 	{0x00009e04, 0x00802020, 0x00802020, 0x00802020, 0x00802020},
@@ -744,7 +744,7 @@ static const u32 ar9300_2p0_baseband_core[][2] = {
 	{0x0000a408, 0x0e79e5c6},
 	{0x0000a40c, 0x00820820},
 	{0x0000a414, 0x1ce739ce},
-	{0x0000a418, 0x7d001dce},
+	{0x0000a418, 0x2d001dce},
 	{0x0000a41c, 0x1ce739ce},
 	{0x0000a420, 0x000001ce},
 	{0x0000a424, 0x1ce739ce},
@@ -756,7 +756,7 @@ static const u32 ar9300_2p0_baseband_core[][2] = {
 	{0x0000a43c, 0x00000000},
 	{0x0000a440, 0x00000000},
 	{0x0000a444, 0x00000000},
-	{0x0000a448, 0x07000080},
+	{0x0000a448, 0x04000080},
 	{0x0000a44c, 0x00000001},
 	{0x0000a450, 0x00010000},
 	{0x0000a458, 0x00000000},
@@ -777,7 +777,7 @@ static const u32 ar9300_2p0_baseband_core[][2] = {
 	{0x0000a638, 0x00000000},
 	{0x0000a63c, 0x00000000},
 	{0x0000a640, 0x00000000},
-	{0x0000a644, 0x3ffd9d74},
+	{0x0000a644, 0x3fad9d74},
 	{0x0000a648, 0x0048060a},
 	{0x0000a64c, 0x00000637},
 	{0x0000a670, 0x03020100},
@@ -835,9 +835,9 @@ static const u32 ar9300_2p0_baseband_core[][2] = {
 
 static const u32 ar9300Modes_high_power_tx_gain_table_2p0[][5] = {
 	/* Addr      5G_HT20     5G_HT40     2G_HT40     2G_HT20   */
-	{0x0000a410, 0x000050db, 0x000050db, 0x000050d9, 0x000050d9},
-	{0x0000a500, 0x00020220, 0x00020220, 0x00000000, 0x00000000},
-	{0x0000a504, 0x06020223, 0x06020223, 0x04000002, 0x04000002},
+	{0x0000a410, 0x000050d9, 0x000050d9, 0x000050d9, 0x000050d9},
+	{0x0000a500, 0x00002220, 0x00002220, 0x00000000, 0x00000000},
+	{0x0000a504, 0x06002223, 0x06002223, 0x04000002, 0x04000002},
 	{0x0000a508, 0x0a022220, 0x0a022220, 0x08000004, 0x08000004},
 	{0x0000a50c, 0x0f022223, 0x0f022223, 0x0b000200, 0x0b000200},
 	{0x0000a510, 0x14022620, 0x14022620, 0x0f000202, 0x0f000202},
@@ -848,28 +848,28 @@ static const u32 ar9300Modes_high_power_tx_gain_table_2p0[][5] = {
 	{0x0000a524, 0x28023042, 0x28023042, 0x1f000a02, 0x1f000a02},
 	{0x0000a528, 0x2c023044, 0x2c023044, 0x23000a04, 0x23000a04},
 	{0x0000a52c, 0x2f023644, 0x2f023644, 0x26000a20, 0x26000a20},
-	{0x0000a530, 0x34043643, 0x34043643, 0x2a000e20, 0x2a000e20},
-	{0x0000a534, 0x38043a44, 0x38043a44, 0x2e000e22, 0x2e000e22},
-	{0x0000a538, 0x3b043e45, 0x3b043e45, 0x31000e24, 0x31000e24},
-	{0x0000a53c, 0x40063e46, 0x40063e46, 0x34001640, 0x34001640},
-	{0x0000a540, 0x44083e46, 0x44083e46, 0x38001660, 0x38001660},
-	{0x0000a544, 0x46083e66, 0x46083e66, 0x3b001861, 0x3b001861},
-	{0x0000a548, 0x4b0a3e69, 0x4b0a3e69, 0x3e001a81, 0x3e001a81},
-	{0x0000a54c, 0x4f0a5e66, 0x4f0a5e66, 0x42001a83, 0x42001a83},
-	{0x0000a550, 0x540a7e66, 0x540a7e66, 0x44001c84, 0x44001c84},
-	{0x0000a554, 0x570a7e89, 0x570a7e89, 0x48001ce3, 0x48001ce3},
-	{0x0000a558, 0x5c0e7e8a, 0x5c0e7e8a, 0x4c001ce5, 0x4c001ce5},
-	{0x0000a55c, 0x60127e8b, 0x60127e8b, 0x50001ce9, 0x50001ce9},
-	{0x0000a560, 0x65127ecc, 0x65127ecc, 0x54001ceb, 0x54001ceb},
-	{0x0000a564, 0x6b169ecd, 0x6b169ecd, 0x56001eec, 0x56001eec},
-	{0x0000a568, 0x70169f0e, 0x70169f0e, 0x56001eec, 0x56001eec},
-	{0x0000a56c, 0x75169f4f, 0x75169f4f, 0x56001eec, 0x56001eec},
-	{0x0000a570, 0x75169f4f, 0x75169f4f, 0x56001eec, 0x56001eec},
-	{0x0000a574, 0x75169f4f, 0x75169f4f, 0x56001eec, 0x56001eec},
-	{0x0000a578, 0x75169f4f, 0x75169f4f, 0x56001eec, 0x56001eec},
-	{0x0000a57c, 0x75169f4f, 0x75169f4f, 0x56001eec, 0x56001eec},
-	{0x0000a580, 0x00820220, 0x00820220, 0x00800000, 0x00800000},
-	{0x0000a584, 0x06820223, 0x06820223, 0x04800002, 0x04800002},
+	{0x0000a530, 0x34025643, 0x34025643, 0x2a000e20, 0x2a000e20},
+	{0x0000a534, 0x38025a44, 0x38025a44, 0x2e000e22, 0x2e000e22},
+	{0x0000a538, 0x3b025e45, 0x3b025e45, 0x31000e24, 0x31000e24},
+	{0x0000a53c, 0x41025e4a, 0x41025e4a, 0x34001640, 0x34001640},
+	{0x0000a540, 0x48025e6c, 0x48025e6c, 0x38001660, 0x38001660},
+	{0x0000a544, 0x4e025e8e, 0x4e025e8e, 0x3b001861, 0x3b001861},
+	{0x0000a548, 0x53025eb2, 0x53025eb2, 0x3e001a81, 0x3e001a81},
+	{0x0000a54c, 0x59025eb5, 0x59025eb5, 0x42001a83, 0x42001a83},
+	{0x0000a550, 0x5f025ef6, 0x5f025ef6, 0x44001c84, 0x44001c84},
+	{0x0000a554, 0x62025f56, 0x62025f56, 0x48001ce3, 0x48001ce3},
+	{0x0000a558, 0x66027f56, 0x66027f56, 0x4c001ce5, 0x4c001ce5},
+	{0x0000a55c, 0x6a029f56, 0x6a029f56, 0x50001ce9, 0x50001ce9},
+	{0x0000a560, 0x70049f56, 0x70049f56, 0x54001ceb, 0x54001ceb},
+	{0x0000a564, 0x7504ff56, 0x7504ff56, 0x56001eec, 0x56001eec},
+	{0x0000a568, 0x7504ff56, 0x7504ff56, 0x56001eec, 0x56001eec},
+	{0x0000a56c, 0x7504ff56, 0x7504ff56, 0x56001eec, 0x56001eec},
+	{0x0000a570, 0x7504ff56, 0x7504ff56, 0x56001eec, 0x56001eec},
+	{0x0000a574, 0x7504ff56, 0x7504ff56, 0x56001eec, 0x56001eec},
+	{0x0000a578, 0x7504ff56, 0x7504ff56, 0x56001eec, 0x56001eec},
+	{0x0000a57c, 0x7504ff56, 0x7504ff56, 0x56001eec, 0x56001eec},
+	{0x0000a580, 0x00802220, 0x00802220, 0x00800000, 0x00800000},
+	{0x0000a584, 0x06802223, 0x06802223, 0x04800002, 0x04800002},
 	{0x0000a588, 0x0a822220, 0x0a822220, 0x08800004, 0x08800004},
 	{0x0000a58c, 0x0f822223, 0x0f822223, 0x0b800200, 0x0b800200},
 	{0x0000a590, 0x14822620, 0x14822620, 0x0f800202, 0x0f800202},
@@ -880,42 +880,42 @@ static const u32 ar9300Modes_high_power_tx_gain_table_2p0[][5] = {
 	{0x0000a5a4, 0x28823042, 0x28823042, 0x1f800a02, 0x1f800a02},
 	{0x0000a5a8, 0x2c823044, 0x2c823044, 0x23800a04, 0x23800a04},
 	{0x0000a5ac, 0x2f823644, 0x2f823644, 0x26800a20, 0x26800a20},
-	{0x0000a5b0, 0x34843643, 0x34843643, 0x2a800e20, 0x2a800e20},
-	{0x0000a5b4, 0x38843a44, 0x38843a44, 0x2e800e22, 0x2e800e22},
-	{0x0000a5b8, 0x3b843e45, 0x3b843e45, 0x31800e24, 0x31800e24},
-	{0x0000a5bc, 0x40863e46, 0x40863e46, 0x34801640, 0x34801640},
-	{0x0000a5c0, 0x4c8a3065, 0x44883e46, 0x44883e46, 0x38801660},
-	{0x0000a5c4, 0x46883e66, 0x46883e66, 0x3b801861, 0x3b801861},
-	{0x0000a5c8, 0x4b8a3e69, 0x4b8a3e69, 0x3e801a81, 0x3e801a81},
-	{0x0000a5cc, 0x4f8a5e66, 0x4f8a5e66, 0x42801a83, 0x42801a83},
-	{0x0000a5d0, 0x548a7e66, 0x548a7e66, 0x44801c84, 0x44801c84},
-	{0x0000a5d4, 0x578a7e89, 0x578a7e89, 0x48801ce3, 0x48801ce3},
-	{0x0000a5d8, 0x5c8e7e8a, 0x5c8e7e8a, 0x4c801ce5, 0x4c801ce5},
-	{0x0000a5dc, 0x60927e8b, 0x60927e8b, 0x50801ce9, 0x50801ce9},
-	{0x0000a5e0, 0x65927ecc, 0x65927ecc, 0x54801ceb, 0x54801ceb},
-	{0x0000a5e4, 0x6b969ecd, 0x6b969ecd, 0x56801eec, 0x56801eec},
-	{0x0000a5e8, 0x70969f0e, 0x70969f0e, 0x56801eec, 0x56801eec},
-	{0x0000a5ec, 0x75969f4f, 0x75969f4f, 0x56801eec, 0x56801eec},
-	{0x0000a5f0, 0x75969f4f, 0x75969f4f, 0x56801eec, 0x56801eec},
-	{0x0000a5f4, 0x75969f4f, 0x75969f4f, 0x56801eec, 0x56801eec},
-	{0x0000a5f8, 0x75969f4f, 0x75969f4f, 0x56801eec, 0x56801eec},
-	{0x0000a5fc, 0x75969f4f, 0x75969f4f, 0x56801eec, 0x56801eec},
+	{0x0000a5b0, 0x34825643, 0x34825643, 0x2a800e20, 0x2a800e20},
+	{0x0000a5b4, 0x38825a44, 0x38825a44, 0x2e800e22, 0x2e800e22},
+	{0x0000a5b8, 0x3b825e45, 0x3b825e45, 0x31800e24, 0x31800e24},
+	{0x0000a5bc, 0x41825e4a, 0x41825e4a, 0x34801640, 0x34801640},
+	{0x0000a5c0, 0x48825e6c, 0x48825e6c, 0x38801660, 0x38801660},
+	{0x0000a5c4, 0x4e825e8e, 0x4e825e8e, 0x3b801861, 0x3b801861},
+	{0x0000a5c8, 0x53825eb2, 0x53825eb2, 0x3e801a81, 0x3e801a81},
+	{0x0000a5cc, 0x59825eb5, 0x59825eb5, 0x42801a83, 0x42801a83},
+	{0x0000a5d0, 0x5f825ef6, 0x5f825ef6, 0x44801c84, 0x44801c84},
+	{0x0000a5d4, 0x62825f56, 0x62825f56, 0x48801ce3, 0x48801ce3},
+	{0x0000a5d8, 0x66827f56, 0x66827f56, 0x4c801ce5, 0x4c801ce5},
+	{0x0000a5dc, 0x6a829f56, 0x6a829f56, 0x50801ce9, 0x50801ce9},
+	{0x0000a5e0, 0x70849f56, 0x70849f56, 0x54801ceb, 0x54801ceb},
+	{0x0000a5e4, 0x7584ff56, 0x7584ff56, 0x56801eec, 0x56801eec},
+	{0x0000a5e8, 0x7584ff56, 0x7584ff56, 0x56801eec, 0x56801eec},
+	{0x0000a5ec, 0x7584ff56, 0x7584ff56, 0x56801eec, 0x56801eec},
+	{0x0000a5f0, 0x7584ff56, 0x7584ff56, 0x56801eec, 0x56801eec},
+	{0x0000a5f4, 0x7584ff56, 0x7584ff56, 0x56801eec, 0x56801eec},
+	{0x0000a5f8, 0x7584ff56, 0x7584ff56, 0x56801eec, 0x56801eec},
+	{0x0000a5fc, 0x7584ff56, 0x7584ff56, 0x56801eec, 0x56801eec},
 	{0x00016044, 0x056db2e6, 0x056db2e6, 0x056db2e6, 0x056db2e6},
-	{0x00016048, 0xad241a61, 0xad241a61, 0xad241a61, 0xad241a61},
+	{0x00016048, 0xae481a61, 0xae481a61, 0xae481a61, 0xae481a61},
 	{0x00016068, 0x6eb6db6c, 0x6eb6db6c, 0x6eb6db6c, 0x6eb6db6c},
 	{0x00016444, 0x056db2e6, 0x056db2e6, 0x056db2e6, 0x056db2e6},
-	{0x00016448, 0xad241a61, 0xad241a61, 0xad241a61, 0xad241a61},
+	{0x00016448, 0xae481a61, 0xae481a61, 0xae481a61, 0xae481a61},
 	{0x00016468, 0x6eb6db6c, 0x6eb6db6c, 0x6eb6db6c, 0x6eb6db6c},
 	{0x00016844, 0x056db2e6, 0x056db2e6, 0x056db2e6, 0x056db2e6},
-	{0x00016848, 0xad241a61, 0xad241a61, 0xad241a61, 0xad241a61},
+	{0x00016848, 0xae481a61, 0xae481a61, 0xae481a61, 0xae481a61},
 	{0x00016868, 0x6eb6db6c, 0x6eb6db6c, 0x6eb6db6c, 0x6eb6db6c},
 };
 
 static const u32 ar9300Modes_high_ob_db_tx_gain_table_2p0[][5] = {
 	/* Addr      5G_HT20     5G_HT40     2G_HT40     2G_HT20   */
-	{0x0000a410, 0x000050db, 0x000050db, 0x000050d9, 0x000050d9},
-	{0x0000a500, 0x00020220, 0x00020220, 0x00000000, 0x00000000},
-	{0x0000a504, 0x06020223, 0x06020223, 0x04000002, 0x04000002},
+	{0x0000a410, 0x000050d9, 0x000050d9, 0x000050d9, 0x000050d9},
+	{0x0000a500, 0x00002220, 0x00002220, 0x00000000, 0x00000000},
+	{0x0000a504, 0x06002223, 0x06002223, 0x04000002, 0x04000002},
 	{0x0000a508, 0x0a022220, 0x0a022220, 0x08000004, 0x08000004},
 	{0x0000a50c, 0x0f022223, 0x0f022223, 0x0b000200, 0x0b000200},
 	{0x0000a510, 0x14022620, 0x14022620, 0x0f000202, 0x0f000202},
@@ -926,28 +926,28 @@ static const u32 ar9300Modes_high_ob_db_tx_gain_table_2p0[][5] = {
 	{0x0000a524, 0x28023042, 0x28023042, 0x1f000a02, 0x1f000a02},
 	{0x0000a528, 0x2c023044, 0x2c023044, 0x23000a04, 0x23000a04},
 	{0x0000a52c, 0x2f023644, 0x2f023644, 0x26000a20, 0x26000a20},
-	{0x0000a530, 0x34043643, 0x34043643, 0x2a000e20, 0x2a000e20},
-	{0x0000a534, 0x38043a44, 0x38043a44, 0x2e000e22, 0x2e000e22},
-	{0x0000a538, 0x3b043e45, 0x3b043e45, 0x31000e24, 0x31000e24},
-	{0x0000a53c, 0x40063e46, 0x40063e46, 0x34001640, 0x34001640},
-	{0x0000a540, 0x44083e46, 0x44083e46, 0x38001660, 0x38001660},
-	{0x0000a544, 0x46083e66, 0x46083e66, 0x3b001861, 0x3b001861},
-	{0x0000a548, 0x4b0a3e69, 0x4b0a3e69, 0x3e001a81, 0x3e001a81},
-	{0x0000a54c, 0x4f0a5e66, 0x4f0a5e66, 0x42001a83, 0x42001a83},
-	{0x0000a550, 0x540a7e66, 0x540a7e66, 0x44001c84, 0x44001c84},
-	{0x0000a554, 0x570a7e89, 0x570a7e89, 0x48001ce3, 0x48001ce3},
-	{0x0000a558, 0x5c0e7e8a, 0x5c0e7e8a, 0x4c001ce5, 0x4c001ce5},
-	{0x0000a55c, 0x60127e8b, 0x60127e8b, 0x50001ce9, 0x50001ce9},
-	{0x0000a560, 0x65127ecc, 0x65127ecc, 0x54001ceb, 0x54001ceb},
-	{0x0000a564, 0x6b169ecd, 0x6b169ecd, 0x56001eec, 0x56001eec},
-	{0x0000a568, 0x70169f0e, 0x70169f0e, 0x56001eec, 0x56001eec},
-	{0x0000a56c, 0x75169f4f, 0x75169f4f, 0x56001eec, 0x56001eec},
-	{0x0000a570, 0x75169f4f, 0x75169f4f, 0x56001eec, 0x56001eec},
-	{0x0000a574, 0x75169f4f, 0x75169f4f, 0x56001eec, 0x56001eec},
-	{0x0000a578, 0x75169f4f, 0x75169f4f, 0x56001eec, 0x56001eec},
-	{0x0000a57c, 0x75169f4f, 0x75169f4f, 0x56001eec, 0x56001eec},
-	{0x0000a580, 0x00820220, 0x00820220, 0x00800000, 0x00800000},
-	{0x0000a584, 0x06820223, 0x06820223, 0x04800002, 0x04800002},
+	{0x0000a530, 0x34025643, 0x34025643, 0x2a000e20, 0x2a000e20},
+	{0x0000a534, 0x38025a44, 0x38025a44, 0x2e000e22, 0x2e000e22},
+	{0x0000a538, 0x3b025e45, 0x3b025e45, 0x31000e24, 0x31000e24},
+	{0x0000a53c, 0x41025e4a, 0x41025e4a, 0x34001640, 0x34001640},
+	{0x0000a540, 0x48025e6c, 0x48025e6c, 0x38001660, 0x38001660},
+	{0x0000a544, 0x4e025e8e, 0x4e025e8e, 0x3b001861, 0x3b001861},
+	{0x0000a548, 0x53025eb2, 0x53025eb2, 0x3e001a81, 0x3e001a81},
+	{0x0000a54c, 0x59025eb5, 0x59025eb5, 0x42001a83, 0x42001a83},
+	{0x0000a550, 0x5f025ef6, 0x5f025ef6, 0x44001c84, 0x44001c84},
+	{0x0000a554, 0x62025f56, 0x62025f56, 0x48001ce3, 0x48001ce3},
+	{0x0000a558, 0x66027f56, 0x66027f56, 0x4c001ce5, 0x4c001ce5},
+	{0x0000a55c, 0x6a029f56, 0x6a029f56, 0x50001ce9, 0x50001ce9},
+	{0x0000a560, 0x70049f56, 0x70049f56, 0x54001ceb, 0x54001ceb},
+	{0x0000a564, 0x7504ff56, 0x7504ff56, 0x56001eec, 0x56001eec},
+	{0x0000a568, 0x7504ff56, 0x7504ff56, 0x56001eec, 0x56001eec},
+	{0x0000a56c, 0x7504ff56, 0x7504ff56, 0x56001eec, 0x56001eec},
+	{0x0000a570, 0x7504ff56, 0x7504ff56, 0x56001eec, 0x56001eec},
+	{0x0000a574, 0x7504ff56, 0x7504ff56, 0x56001eec, 0x56001eec},
+	{0x0000a578, 0x7504ff56, 0x7504ff56, 0x56001eec, 0x56001eec},
+	{0x0000a57c, 0x7504ff56, 0x7504ff56, 0x56001eec, 0x56001eec},
+	{0x0000a580, 0x00802220, 0x00802220, 0x00800000, 0x00800000},
+	{0x0000a584, 0x06802223, 0x06802223, 0x04800002, 0x04800002},
 	{0x0000a588, 0x0a822220, 0x0a822220, 0x08800004, 0x08800004},
 	{0x0000a58c, 0x0f822223, 0x0f822223, 0x0b800200, 0x0b800200},
 	{0x0000a590, 0x14822620, 0x14822620, 0x0f800202, 0x0f800202},
@@ -958,34 +958,34 @@ static const u32 ar9300Modes_high_ob_db_tx_gain_table_2p0[][5] = {
 	{0x0000a5a4, 0x28823042, 0x28823042, 0x1f800a02, 0x1f800a02},
 	{0x0000a5a8, 0x2c823044, 0x2c823044, 0x23800a04, 0x23800a04},
 	{0x0000a5ac, 0x2f823644, 0x2f823644, 0x26800a20, 0x26800a20},
-	{0x0000a5b0, 0x34843643, 0x34843643, 0x2a800e20, 0x2a800e20},
-	{0x0000a5b4, 0x38843a44, 0x38843a44, 0x2e800e22, 0x2e800e22},
-	{0x0000a5b8, 0x3b843e45, 0x3b843e45, 0x31800e24, 0x31800e24},
-	{0x0000a5bc, 0x40863e46, 0x40863e46, 0x34801640, 0x34801640},
-	{0x0000a5c0, 0x44883e46, 0x44883e46, 0x38801660, 0x38801660},
-	{0x0000a5c4, 0x46883e66, 0x46883e66, 0x3b801861, 0x3b801861},
-	{0x0000a5c8, 0x4b8a3e69, 0x4b8a3e69, 0x3e801a81, 0x3e801a81},
-	{0x0000a5cc, 0x4f8a5e66, 0x4f8a5e66, 0x42801a83, 0x42801a83},
-	{0x0000a5d0, 0x548a7e66, 0x548a7e66, 0x44801c84, 0x44801c84},
-	{0x0000a5d4, 0x578a7e89, 0x578a7e89, 0x48801ce3, 0x48801ce3},
-	{0x0000a5d8, 0x5c8e7e8a, 0x5c8e7e8a, 0x4c801ce5, 0x4c801ce5},
-	{0x0000a5dc, 0x60927e8b, 0x60927e8b, 0x50801ce9, 0x50801ce9},
-	{0x0000a5e0, 0x65927ecc, 0x65927ecc, 0x54801ceb, 0x54801ceb},
-	{0x0000a5e4, 0x6b969ecd, 0x6b969ecd, 0x56801eec, 0x56801eec},
-	{0x0000a5e8, 0x70969f0e, 0x70969f0e, 0x56801eec, 0x56801eec},
-	{0x0000a5ec, 0x75969f4f, 0x75969f4f, 0x56801eec, 0x56801eec},
-	{0x0000a5f0, 0x75969f4f, 0x75969f4f, 0x56801eec, 0x56801eec},
-	{0x0000a5f4, 0x75969f4f, 0x75969f4f, 0x56801eec, 0x56801eec},
-	{0x0000a5f8, 0x75969f4f, 0x75969f4f, 0x56801eec, 0x56801eec},
-	{0x0000a5fc, 0x75969f4f, 0x75969f4f, 0x56801eec, 0x56801eec},
+	{0x0000a5b0, 0x34825643, 0x34825643, 0x2a800e20, 0x2a800e20},
+	{0x0000a5b4, 0x38825a44, 0x38825a44, 0x2e800e22, 0x2e800e22},
+	{0x0000a5b8, 0x3b825e45, 0x3b825e45, 0x31800e24, 0x31800e24},
+	{0x0000a5bc, 0x41825e4a, 0x41825e4a, 0x34801640, 0x34801640},
+	{0x0000a5c0, 0x48825e6c, 0x48825e6c, 0x38801660, 0x38801660},
+	{0x0000a5c4, 0x4e825e8e, 0x4e825e8e, 0x3b801861, 0x3b801861},
+	{0x0000a5c8, 0x53825eb2, 0x53825eb2, 0x3e801a81, 0x3e801a81},
+	{0x0000a5cc, 0x59825eb5, 0x59825eb5, 0x42801a83, 0x42801a83},
+	{0x0000a5d0, 0x5f825ef6, 0x5f825ef6, 0x44801c84, 0x44801c84},
+	{0x0000a5d4, 0x62825f56, 0x62825f56, 0x48801ce3, 0x48801ce3},
+	{0x0000a5d8, 0x66827f56, 0x66827f56, 0x4c801ce5, 0x4c801ce5},
+	{0x0000a5dc, 0x6a829f56, 0x6a829f56, 0x50801ce9, 0x50801ce9},
+	{0x0000a5e0, 0x70849f56, 0x70849f56, 0x54801ceb, 0x54801ceb},
+	{0x0000a5e4, 0x7584ff56, 0x7584ff56, 0x56801eec, 0x56801eec},
+	{0x0000a5e8, 0x7584ff56, 0x7584ff56, 0x56801eec, 0x56801eec},
+	{0x0000a5ec, 0x7584ff56, 0x7584ff56, 0x56801eec, 0x56801eec},
+	{0x0000a5f0, 0x7584ff56, 0x7584ff56, 0x56801eec, 0x56801eec},
+	{0x0000a5f4, 0x7584ff56, 0x7584ff56, 0x56801eec, 0x56801eec},
+	{0x0000a5f8, 0x7584ff56, 0x7584ff56, 0x56801eec, 0x56801eec},
+	{0x0000a5fc, 0x7584ff56, 0x7584ff56, 0x56801eec, 0x56801eec},
 	{0x00016044, 0x056db2e4, 0x056db2e4, 0x056db2e4, 0x056db2e4},
-	{0x00016048, 0x8c001a61, 0x8c001a61, 0x8c001a61, 0x8c001a61},
+	{0x00016048, 0x8e481a61, 0x8e481a61, 0x8e481a61, 0x8e481a61},
 	{0x00016068, 0x6db6db6c, 0x6db6db6c, 0x6db6db6c, 0x6db6db6c},
 	{0x00016444, 0x056db2e4, 0x056db2e4, 0x056db2e4, 0x056db2e4},
-	{0x00016448, 0x8c001a61, 0x8c001a61, 0x8c001a61, 0x8c001a61},
+	{0x00016448, 0x8e481a61, 0x8e481a61, 0x8e481a61, 0x8e481a61},
 	{0x00016468, 0x6db6db6c, 0x6db6db6c, 0x6db6db6c, 0x6db6db6c},
 	{0x00016844, 0x056db2e4, 0x056db2e4, 0x056db2e4, 0x056db2e4},
-	{0x00016848, 0x8c001a61, 0x8c001a61, 0x8c001a61, 0x8c001a61},
+	{0x00016848, 0x8e481a61, 0x8e481a61, 0x8e481a61, 0x8e481a61},
 	{0x00016868, 0x6db6db6c, 0x6db6db6c, 0x6db6db6c, 0x6db6db6c},
 };
 
-- 
cgit v1.2.3-70-g09d2


From 2ff6575b1e497f88acf2c7de7e1ba015267b689d Mon Sep 17 00:00:00 2001
From: Sujith <Sujith.Manoharan@atheros.com>
Date: Fri, 7 May 2010 13:37:57 +0530
Subject: ath9k_htc: Handle IDLE LED properly

Switch LED off/on when handling CONF_CHANGE_IDLE.
Not doing this would leave the radio LED on even
though the chip would be in full sleep mode.

Signed-off-by: Sujith <Sujith.Manoharan@atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/ath/ath9k/htc_drv_main.c | 26 +++++++++++++++++++-------
 1 file changed, 19 insertions(+), 7 deletions(-)

(limited to 'drivers/net/wireless')

diff --git a/drivers/net/wireless/ath/ath9k/htc_drv_main.c b/drivers/net/wireless/ath/ath9k/htc_drv_main.c
index 7c9e33ba95a..f5035860526 100644
--- a/drivers/net/wireless/ath/ath9k/htc_drv_main.c
+++ b/drivers/net/wireless/ath/ath9k/htc_drv_main.c
@@ -1099,7 +1099,7 @@ fail_tx:
 	return 0;
 }
 
-static int ath9k_htc_radio_enable(struct ieee80211_hw *hw)
+static int ath9k_htc_radio_enable(struct ieee80211_hw *hw, bool led)
 {
 	struct ath9k_htc_priv *priv = hw->priv;
 	struct ath_hw *ah = priv->ah;
@@ -1147,6 +1147,13 @@ static int ath9k_htc_radio_enable(struct ieee80211_hw *hw)
 	priv->tx_queues_stop = false;
 	spin_unlock_bh(&priv->tx_lock);
 
+	if (led) {
+		/* Enable LED */
+		ath9k_hw_cfg_output(ah, ah->led_pin,
+				    AR_GPIO_OUTPUT_MUX_AS_OUTPUT);
+		ath9k_hw_set_gpio(ah, ah->led_pin, 0);
+	}
+
 	ieee80211_wake_queues(hw);
 
 	return ret;
@@ -1158,13 +1165,13 @@ static int ath9k_htc_start(struct ieee80211_hw *hw)
 	int ret = 0;
 
 	mutex_lock(&priv->mutex);
-	ret = ath9k_htc_radio_enable(hw);
+	ret = ath9k_htc_radio_enable(hw, false);
 	mutex_unlock(&priv->mutex);
 
 	return ret;
 }
 
-static void ath9k_htc_radio_disable(struct ieee80211_hw *hw)
+static void ath9k_htc_radio_disable(struct ieee80211_hw *hw, bool led)
 {
 	struct ath9k_htc_priv *priv = hw->priv;
 	struct ath_hw *ah = priv->ah;
@@ -1177,6 +1184,12 @@ static void ath9k_htc_radio_disable(struct ieee80211_hw *hw)
 		return;
 	}
 
+	if (led) {
+		/* Disable LED */
+		ath9k_hw_set_gpio(ah, ah->led_pin, 1);
+		ath9k_hw_cfg_gpio_input(ah, ah->led_pin);
+	}
+
 	/* Cancel all the running timers/work .. */
 	cancel_work_sync(&priv->ps_work);
 	cancel_delayed_work_sync(&priv->ath9k_ani_work);
@@ -1217,7 +1230,7 @@ static void ath9k_htc_stop(struct ieee80211_hw *hw)
 	struct ath9k_htc_priv *priv = hw->priv;
 
 	mutex_lock(&priv->mutex);
-	ath9k_htc_radio_disable(hw);
+	ath9k_htc_radio_disable(hw, false);
 	mutex_unlock(&priv->mutex);
 }
 
@@ -1337,7 +1350,7 @@ static int ath9k_htc_config(struct ieee80211_hw *hw, u32 changed)
 
 		if (enable_radio) {
 			ath9k_htc_setpower(priv, ATH9K_PM_AWAKE);
-			ath9k_htc_radio_enable(hw);
+			ath9k_htc_radio_enable(hw, true);
 			ath_print(common, ATH_DBG_CONFIG,
 				  "not-idle: enabling radio\n");
 		}
@@ -1389,10 +1402,9 @@ static int ath9k_htc_config(struct ieee80211_hw *hw, u32 changed)
 	if (priv->ps_idle) {
 		ath_print(common, ATH_DBG_CONFIG,
 			  "idle: disabling radio\n");
-		ath9k_htc_radio_disable(hw);
+		ath9k_htc_radio_disable(hw, true);
 	}
 
-
 	mutex_unlock(&priv->mutex);
 
 	return 0;
-- 
cgit v1.2.3-70-g09d2


From d717fd6188b2ea63cf9dc0a870fd312c312841cd Mon Sep 17 00:00:00 2001
From: Juuso Oikarinen <juuso.oikarinen@nokia.com>
Date: Fri, 7 May 2010 11:38:58 +0300
Subject: wl1271: Add sysfs file to retrieve HW PG-version and ROM-version

This patch reads the HW PG version (along with a ROM-version, embedded in the
same value) from the wl1271 hardware and publishes the value in a sysfs -file.

Signed-off-by: Juuso Oikarinen <juuso.oikarinen@nokia.com>
Reviewed-by: Luciano Coelho <luciano.coelho@nokia.com>
Signed-off-by: Luciano Coelho <luciano.coelho@nokia.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/wl12xx/wl1271.h      |  2 ++
 drivers/net/wireless/wl12xx/wl1271_boot.c | 12 +++++++++++
 drivers/net/wireless/wl12xx/wl1271_boot.h |  3 +++
 drivers/net/wireless/wl12xx/wl1271_main.c | 34 +++++++++++++++++++++++++++++++
 4 files changed, 51 insertions(+)

(limited to 'drivers/net/wireless')

diff --git a/drivers/net/wireless/wl12xx/wl1271.h b/drivers/net/wireless/wl12xx/wl1271.h
index 75887e74205..3e1769dd1b5 100644
--- a/drivers/net/wireless/wl12xx/wl1271.h
+++ b/drivers/net/wireless/wl12xx/wl1271.h
@@ -388,6 +388,8 @@ struct wl1271 {
 	size_t fw_len;
 	struct wl1271_nvs_file *nvs;
 
+	s8 hw_pg_ver;
+
 	u8 bssid[ETH_ALEN];
 	u8 mac_addr[ETH_ALEN];
 	u8 bss_type;
diff --git a/drivers/net/wireless/wl12xx/wl1271_boot.c b/drivers/net/wireless/wl12xx/wl1271_boot.c
index 7e797157783..139a1e0fc7e 100644
--- a/drivers/net/wireless/wl12xx/wl1271_boot.c
+++ b/drivers/net/wireless/wl12xx/wl1271_boot.c
@@ -440,11 +440,23 @@ static int wl1271_boot_write_irq_polarity(struct wl1271 *wl)
 	return 0;
 }
 
+static void wl1271_boot_hw_version(struct wl1271 *wl)
+{
+	u32 fuse;
+
+	fuse = wl1271_top_reg_read(wl, REG_FUSE_DATA_2_1);
+	fuse = (fuse & PG_VER_MASK) >> PG_VER_OFFSET;
+
+	wl->hw_pg_ver = (s8)fuse;
+}
+
 int wl1271_boot(struct wl1271 *wl)
 {
 	int ret = 0;
 	u32 tmp, clk, pause;
 
+	wl1271_boot_hw_version(wl);
+
 	if (REF_CLOCK == 0 || REF_CLOCK == 2 || REF_CLOCK == 4)
 		/* ref clk: 19.2/38.4/38.4-XTAL */
 		clk = 0x3;
diff --git a/drivers/net/wireless/wl12xx/wl1271_boot.h b/drivers/net/wireless/wl12xx/wl1271_boot.h
index 95ecc524195..f829699d597 100644
--- a/drivers/net/wireless/wl12xx/wl1271_boot.h
+++ b/drivers/net/wireless/wl12xx/wl1271_boot.h
@@ -55,6 +55,9 @@ struct wl1271_static_data {
 #define OCP_REG_CLK_POLARITY 0x0cb2
 #define OCP_REG_CLK_PULL     0x0cb4
 
+#define REG_FUSE_DATA_2_1    0x050a
+#define PG_VER_MASK          0x3c
+#define PG_VER_OFFSET        2
 
 #define CMD_MBOX_ADDRESS     0x407B4
 
diff --git a/drivers/net/wireless/wl12xx/wl1271_main.c b/drivers/net/wireless/wl12xx/wl1271_main.c
index b0837255de6..36dfdee5fbf 100644
--- a/drivers/net/wireless/wl12xx/wl1271_main.c
+++ b/drivers/net/wireless/wl12xx/wl1271_main.c
@@ -2232,6 +2232,29 @@ static DEVICE_ATTR(bt_coex_state, S_IRUGO | S_IWUSR,
 		   wl1271_sysfs_show_bt_coex_state,
 		   wl1271_sysfs_store_bt_coex_state);
 
+static ssize_t wl1271_sysfs_show_hw_pg_ver(struct device *dev,
+					   struct device_attribute *attr,
+					   char *buf)
+{
+	struct wl1271 *wl = dev_get_drvdata(dev);
+	ssize_t len;
+
+	/* FIXME: what's the maximum length of buf? page size?*/
+	len = 500;
+
+	mutex_lock(&wl->mutex);
+	if (wl->hw_pg_ver >= 0)
+		len = snprintf(buf, len, "%d\n", wl->hw_pg_ver);
+	else
+		len = snprintf(buf, len, "n/a\n");
+	mutex_unlock(&wl->mutex);
+
+	return len;
+}
+
+static DEVICE_ATTR(hw_pg_ver, S_IRUGO | S_IWUSR,
+		   wl1271_sysfs_show_hw_pg_ver, NULL);
+
 int wl1271_register_hw(struct wl1271 *wl)
 {
 	int ret;
@@ -2351,6 +2374,7 @@ struct ieee80211_hw *wl1271_alloc_hw(void)
 	wl->vif = NULL;
 	wl->flags = 0;
 	wl->sg_enabled = true;
+	wl->hw_pg_ver = -1;
 
 	for (i = 0; i < ACX_TX_DESCRIPTORS; i++)
 		wl->tx_frames[i] = NULL;
@@ -2380,8 +2404,18 @@ struct ieee80211_hw *wl1271_alloc_hw(void)
 		goto err_platform;
 	}
 
+	/* Create sysfs file to get HW PG version */
+	ret = device_create_file(&wl->plat_dev->dev, &dev_attr_hw_pg_ver);
+	if (ret < 0) {
+		wl1271_error("failed to create sysfs file hw_pg_ver");
+		goto err_bt_coex_state;
+	}
+
 	return hw;
 
+err_bt_coex_state:
+	device_remove_file(&wl->plat_dev->dev, &dev_attr_bt_coex_state);
+
 err_platform:
 	platform_device_unregister(wl->plat_dev);
 
-- 
cgit v1.2.3-70-g09d2


From 554d7209c87a7b7ec70c14d9ed1c01e05f5dbc23 Mon Sep 17 00:00:00 2001
From: Juuso Oikarinen <juuso.oikarinen@nokia.com>
Date: Fri, 7 May 2010 11:38:59 +0300
Subject: wl1271: Fix 32 bit register read related endiannes bug

Reading single registers did not pay attention to data endianness. This patch
fix that.

Signed-off-by: Juuso Oikarinen <juuso.oikarinen@nokia.com>
Reviewed-by: Luciano Coelho <luciano.coelho@nokia.com>
Signed-off-by: Luciano Coelho <luciano.coelho@nokia.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/wl12xx/wl1271.h    | 2 +-
 drivers/net/wireless/wl12xx/wl1271_io.h | 4 ++--
 2 files changed, 3 insertions(+), 3 deletions(-)

(limited to 'drivers/net/wireless')

diff --git a/drivers/net/wireless/wl12xx/wl1271.h b/drivers/net/wireless/wl12xx/wl1271.h
index 3e1769dd1b5..6f1b6b5640c 100644
--- a/drivers/net/wireless/wl12xx/wl1271.h
+++ b/drivers/net/wireless/wl12xx/wl1271.h
@@ -481,7 +481,7 @@ struct wl1271 {
 	struct wl1271_stats stats;
 	struct wl1271_debugfs debugfs;
 
-	u32 buffer_32;
+	__le32 buffer_32;
 	u32 buffer_cmd;
 	u32 buffer_busyword[WL1271_BUSY_WORD_CNT];
 
diff --git a/drivers/net/wireless/wl12xx/wl1271_io.h b/drivers/net/wireless/wl12xx/wl1271_io.h
index d8837ef0bb4..bc806c74c63 100644
--- a/drivers/net/wireless/wl12xx/wl1271_io.h
+++ b/drivers/net/wireless/wl12xx/wl1271_io.h
@@ -74,12 +74,12 @@ static inline u32 wl1271_raw_read32(struct wl1271 *wl, int addr)
 	wl1271_raw_read(wl, addr, &wl->buffer_32,
 			    sizeof(wl->buffer_32), false);
 
-	return wl->buffer_32;
+	return le32_to_cpu(wl->buffer_32);
 }
 
 static inline void wl1271_raw_write32(struct wl1271 *wl, int addr, u32 val)
 {
-	wl->buffer_32 = val;
+	wl->buffer_32 = cpu_to_le32(val);
 	wl1271_raw_write(wl, addr, &wl->buffer_32,
 			     sizeof(wl->buffer_32), false);
 }
-- 
cgit v1.2.3-70-g09d2


From 69e5434cd536c7eb4d5be0d0b7db06ed420c1315 Mon Sep 17 00:00:00 2001
From: Juuso Oikarinen <juuso.oikarinen@nokia.com>
Date: Fri, 7 May 2010 11:39:00 +0300
Subject: wl1271: Fix to join and channel number handling

This patch changes the way JOIN's are performed, and channel numbers updated.
The reason for this is that the firmware JOIN command clears WPA(2) key
material, and if done while associated to a WPA(2) secured AP, will render
the data-path unusable.

While the channel is not usually changed while associated (and currently we
could not even support something like that), after performing a scan operation
while associated, mac80211 will re-set the current channel to the driver. This
caused our problem.

Also, the mac80211 is assuming that the driver channel configuration remains
persistent over periods of IDLE. Therefore remove channel resetting to zero
from the unjoin function.

Signed-off-by: Juuso Oikarinen <juuso.oikarinen@nokia.com>
Reviewed-by: Teemu Paasikivi <ext-teemu.3.paasikivi@nokia.com>
Signed-off-by: Luciano Coelho <luciano.coelho@nokia.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/wl12xx/wl1271_main.c | 29 +++++++++++++++++++++++------
 1 file changed, 23 insertions(+), 6 deletions(-)

(limited to 'drivers/net/wireless')

diff --git a/drivers/net/wireless/wl12xx/wl1271_main.c b/drivers/net/wireless/wl12xx/wl1271_main.c
index 36dfdee5fbf..3e4b9fbe8a0 100644
--- a/drivers/net/wireless/wl12xx/wl1271_main.c
+++ b/drivers/net/wireless/wl12xx/wl1271_main.c
@@ -1139,10 +1139,25 @@ out:
 	return ret;
 }
 
-static int wl1271_join(struct wl1271 *wl)
+static int wl1271_join(struct wl1271 *wl, bool set_assoc)
 {
 	int ret;
 
+	/*
+	 * One of the side effects of the JOIN command is that is clears
+	 * WPA/WPA2 keys from the chipset. Performing a JOIN while associated
+	 * to a WPA/WPA2 access point will therefore kill the data-path.
+	 * Currently there is no supported scenario for JOIN during
+	 * association - if it becomes a supported scenario, the WPA/WPA2 keys
+	 * must be handled somehow.
+	 *
+	 */
+	if (test_bit(WL1271_FLAG_STA_ASSOCIATED, &wl->flags))
+		wl1271_info("JOIN while associated.");
+
+	if (set_assoc)
+		set_bit(WL1271_FLAG_STA_ASSOCIATED, &wl->flags);
+
 	ret = wl1271_cmd_join(wl, wl->set_bss_type);
 	if (ret < 0)
 		goto out;
@@ -1189,7 +1204,6 @@ static int wl1271_unjoin(struct wl1271 *wl)
 		goto out;
 
 	clear_bit(WL1271_FLAG_JOINED, &wl->flags);
-	wl->channel = 0;
 	memset(wl->bssid, 0, ETH_ALEN);
 
 	/* stop filterting packets based on bssid */
@@ -1249,7 +1263,9 @@ static int wl1271_op_config(struct ieee80211_hw *hw, u32 changed)
 		goto out;
 
 	/* if the channel changes while joined, join again */
-	if (changed & IEEE80211_CONF_CHANGE_CHANNEL) {
+	if (changed & IEEE80211_CONF_CHANGE_CHANNEL &&
+	    ((wl->band != conf->channel->band) ||
+	     (wl->channel != channel))) {
 		wl->band = conf->channel->band;
 		wl->channel = channel;
 
@@ -1269,7 +1285,7 @@ static int wl1271_op_config(struct ieee80211_hw *hw, u32 changed)
 				       "failed %d", ret);
 
 		if (test_bit(WL1271_FLAG_JOINED, &wl->flags)) {
-			ret = wl1271_join(wl);
+			ret = wl1271_join(wl, false);
 			if (ret < 0)
 				wl1271_warning("cmd join to update channel "
 					       "failed %d", ret);
@@ -1651,6 +1667,7 @@ static void wl1271_op_bss_info_changed(struct ieee80211_hw *hw,
 	enum wl1271_cmd_ps_mode mode;
 	struct wl1271 *wl = hw->priv;
 	bool do_join = false;
+	bool set_assoc = false;
 	int ret;
 
 	wl1271_debug(DEBUG_MAC80211, "mac80211 bss info changed");
@@ -1760,7 +1777,7 @@ static void wl1271_op_bss_info_changed(struct ieee80211_hw *hw,
 		if (bss_conf->assoc) {
 			u32 rates;
 			wl->aid = bss_conf->aid;
-			set_bit(WL1271_FLAG_STA_ASSOCIATED, &wl->flags);
+			set_assoc = true;
 
 			/*
 			 * use basic rates from AP, and determine lowest rate
@@ -1860,7 +1877,7 @@ static void wl1271_op_bss_info_changed(struct ieee80211_hw *hw,
 	}
 
 	if (do_join) {
-		ret = wl1271_join(wl);
+		ret = wl1271_join(wl, set_assoc);
 		if (ret < 0) {
 			wl1271_warning("cmd join failed %d", ret);
 			goto out_sleep;
-- 
cgit v1.2.3-70-g09d2


From 0cbb1034396243173fa5acac715fcf416fa76644 Mon Sep 17 00:00:00 2001
From: Teemu Paasikivi <ext-teemu.3.paasikivi@nokia.com>
Date: Fri, 7 May 2010 11:39:01 +0300
Subject: wl1271: Increase timeout for command event waiting

Incresed the timeout value for command complete event waiting from 100
ms to 750 ms. In some rare cases it can take about 600 ms before
complete event for join command is received. This is most propably
caused by the firmware being busy with scanning related activities.

Signed-off-by: Teemu Paasikivi <ext-teemu.3.paasikivi@nokia.com>
Reviewed-by: Juuso Oikarinen <juuso.oikarinen@nokia.com>
Signed-off-by: Luciano Coelho <luciano.coelho@nokia.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/wl12xx/wl1271_cmd.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'drivers/net/wireless')

diff --git a/drivers/net/wireless/wl12xx/wl1271_cmd.h b/drivers/net/wireless/wl12xx/wl1271_cmd.h
index 00f78b7aa38..f2820b42a94 100644
--- a/drivers/net/wireless/wl12xx/wl1271_cmd.h
+++ b/drivers/net/wireless/wl12xx/wl1271_cmd.h
@@ -129,7 +129,7 @@ enum cmd_templ {
 /* unit ms */
 #define WL1271_COMMAND_TIMEOUT     2000
 #define WL1271_CMD_TEMPL_MAX_SIZE  252
-#define WL1271_EVENT_TIMEOUT       100
+#define WL1271_EVENT_TIMEOUT       750
 
 struct wl1271_cmd_header {
 	__le16 id;
-- 
cgit v1.2.3-70-g09d2


From cbd1ea87a198669537591cef9ee834d6986c169b Mon Sep 17 00:00:00 2001
From: Juuso Oikarinen <juuso.oikarinen@nokia.com>
Date: Fri, 7 May 2010 11:39:02 +0300
Subject: wl1271: Reduce PSM entry hang over period from 128 => 1 ms

Currently, we configure a 128ms hang over period for the PSM entry
(the firmware will remain active for 128ms after sending the null func for
PSM and getting an ack for it.) This is a huge power consumption issue, and
appears unnecessary. So, configure the value to 1 ms.

Signed-off-by: Juuso Oikarinen <juuso.oikarinen@nokia.com>
Reviewed-by: Janne Ylalehto <janne.ylalehto@nokia.com>
Signed-off-by: Luciano Coelho <luciano.coelho@nokia.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/wl12xx/wl1271_cmd.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'drivers/net/wireless')

diff --git a/drivers/net/wireless/wl12xx/wl1271_cmd.c b/drivers/net/wireless/wl12xx/wl1271_cmd.c
index 4292f8dc2a8..0a2d2ed1e1b 100644
--- a/drivers/net/wireless/wl12xx/wl1271_cmd.c
+++ b/drivers/net/wireless/wl12xx/wl1271_cmd.c
@@ -515,7 +515,7 @@ int wl1271_cmd_ps_mode(struct wl1271 *wl, u8 ps_mode, bool send)
 	ps_params->ps_mode = ps_mode;
 	ps_params->send_null_data = send;
 	ps_params->retries = 5;
-	ps_params->hang_over_period = 128;
+	ps_params->hang_over_period = 1;
 	ps_params->null_data_rate = cpu_to_le32(1); /* 1 Mbps */
 
 	ret = wl1271_cmd_send(wl, CMD_SET_PS_MODE, ps_params,
-- 
cgit v1.2.3-70-g09d2


From 1affa091975e47d50ce6a88e9b1abfe717c2fe27 Mon Sep 17 00:00:00 2001
From: Helmut Schaa <helmut.schaa@googlemail.com>
Date: Fri, 7 May 2010 11:03:08 +0200
Subject: rt2x00: rt2800: use correct txop value in tx descriptor

rt2800 devices use a different enumeration to specify what IFS values should
be used on frame transmission compared to the other rt2x00 devices. Hence,
create a new enum called txop that contains the valid values.

Furthermore use the appropriate txop values as found in the ralink drivers:
- TXOP_BACKOFF for management frames
- TXOP_SIFS for subsequent fragments in a burst
- TXOP_HTTXOP for all data frames

Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com>
Acked-by: Ivo van Doorn <IvDoorn@gmail.com>
Acked-by: Gertjan van Wingerde <gwingerde@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/rt2x00/rt2800pci.c   |  2 +-
 drivers/net/wireless/rt2x00/rt2800usb.c   |  2 +-
 drivers/net/wireless/rt2x00/rt2x00ht.c    | 17 +++++++++++++++++
 drivers/net/wireless/rt2x00/rt2x00queue.h |  2 ++
 drivers/net/wireless/rt2x00/rt2x00reg.h   | 10 ++++++++++
 5 files changed, 31 insertions(+), 2 deletions(-)

(limited to 'drivers/net/wireless')

diff --git a/drivers/net/wireless/rt2x00/rt2800pci.c b/drivers/net/wireless/rt2x00/rt2800pci.c
index f08b6a37bf2..df2c3fb8b4b 100644
--- a/drivers/net/wireless/rt2x00/rt2800pci.c
+++ b/drivers/net/wireless/rt2x00/rt2800pci.c
@@ -643,7 +643,7 @@ static int rt2800pci_write_tx_data(struct queue_entry* entry,
 	rt2x00_set_field32(&word, TXWI_W0_AMPDU,
 			   test_bit(ENTRY_TXD_HT_AMPDU, &txdesc->flags));
 	rt2x00_set_field32(&word, TXWI_W0_MPDU_DENSITY, txdesc->mpdu_density);
-	rt2x00_set_field32(&word, TXWI_W0_TX_OP, txdesc->ifs);
+	rt2x00_set_field32(&word, TXWI_W0_TX_OP, txdesc->txop);
 	rt2x00_set_field32(&word, TXWI_W0_MCS, txdesc->mcs);
 	rt2x00_set_field32(&word, TXWI_W0_BW,
 			   test_bit(ENTRY_TXD_HT_BW_40, &txdesc->flags));
diff --git a/drivers/net/wireless/rt2x00/rt2800usb.c b/drivers/net/wireless/rt2x00/rt2800usb.c
index 67f8234f24d..94b68127811 100644
--- a/drivers/net/wireless/rt2x00/rt2800usb.c
+++ b/drivers/net/wireless/rt2x00/rt2800usb.c
@@ -417,7 +417,7 @@ static void rt2800usb_write_tx_desc(struct rt2x00_dev *rt2x00dev,
 	rt2x00_set_field32(&word, TXWI_W0_AMPDU,
 			   test_bit(ENTRY_TXD_HT_AMPDU, &txdesc->flags));
 	rt2x00_set_field32(&word, TXWI_W0_MPDU_DENSITY, txdesc->mpdu_density);
-	rt2x00_set_field32(&word, TXWI_W0_TX_OP, txdesc->ifs);
+	rt2x00_set_field32(&word, TXWI_W0_TX_OP, txdesc->txop);
 	rt2x00_set_field32(&word, TXWI_W0_MCS, txdesc->mcs);
 	rt2x00_set_field32(&word, TXWI_W0_BW,
 			   test_bit(ENTRY_TXD_HT_BW_40, &txdesc->flags));
diff --git a/drivers/net/wireless/rt2x00/rt2x00ht.c b/drivers/net/wireless/rt2x00/rt2x00ht.c
index 1056c92143a..5a407602ce3 100644
--- a/drivers/net/wireless/rt2x00/rt2x00ht.c
+++ b/drivers/net/wireless/rt2x00/rt2x00ht.c
@@ -35,6 +35,7 @@ void rt2x00ht_create_tx_descriptor(struct queue_entry *entry,
 {
 	struct ieee80211_tx_info *tx_info = IEEE80211_SKB_CB(entry->skb);
 	struct ieee80211_tx_rate *txrate = &tx_info->control.rates[0];
+	struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)entry->skb->data;
 
 	if (tx_info->control.sta)
 		txdesc->mpdu_density =
@@ -66,4 +67,20 @@ void rt2x00ht_create_tx_descriptor(struct queue_entry *entry,
 		__set_bit(ENTRY_TXD_HT_BW_40, &txdesc->flags);
 	if (txrate->flags & IEEE80211_TX_RC_SHORT_GI)
 		__set_bit(ENTRY_TXD_HT_SHORT_GI, &txdesc->flags);
+
+	/*
+	 * Determine IFS values
+	 * - Use TXOP_BACKOFF for management frames
+	 * - Use TXOP_SIFS for fragment bursts
+	 * - Use TXOP_HTTXOP for everything else
+	 *
+	 * Note: rt2800 devices won't use CTS protection (if used)
+	 * for frames not transmitted with TXOP_HTTXOP
+	 */
+	if (ieee80211_is_mgmt(hdr->frame_control))
+		txdesc->txop = TXOP_BACKOFF;
+	else if (!(tx_info->flags & IEEE80211_TX_CTL_FIRST_FRAGMENT))
+		txdesc->txop = TXOP_SIFS;
+	else
+		txdesc->txop = TXOP_HTTXOP;
 }
diff --git a/drivers/net/wireless/rt2x00/rt2x00queue.h b/drivers/net/wireless/rt2x00/rt2x00queue.h
index 94a48c174d6..36a957adc1f 100644
--- a/drivers/net/wireless/rt2x00/rt2x00queue.h
+++ b/drivers/net/wireless/rt2x00/rt2x00queue.h
@@ -299,6 +299,7 @@ enum txentry_desc_flags {
  * @retry_limit: Max number of retries.
  * @aifs: AIFS value.
  * @ifs: IFS value.
+ * @txop: IFS value for 11n capable chips.
  * @cw_min: cwmin value.
  * @cw_max: cwmax value.
  * @cipher: Cipher type used for encryption.
@@ -328,6 +329,7 @@ struct txentry_desc {
 	short retry_limit;
 	short aifs;
 	short ifs;
+	short txop;
 	short cw_min;
 	short cw_max;
 
diff --git a/drivers/net/wireless/rt2x00/rt2x00reg.h b/drivers/net/wireless/rt2x00/rt2x00reg.h
index 603bfc0adaa..b9fe94873ee 100644
--- a/drivers/net/wireless/rt2x00/rt2x00reg.h
+++ b/drivers/net/wireless/rt2x00/rt2x00reg.h
@@ -100,6 +100,16 @@ enum ifs {
 	IFS_NONE = 3,
 };
 
+/*
+ * IFS backoff values for HT devices
+ */
+enum txop {
+	TXOP_HTTXOP = 0,
+	TXOP_PIFS = 1,
+	TXOP_SIFS = 2,
+	TXOP_BACKOFF = 3,
+};
+
 /*
  * Cipher types for hardware encryption
  */
-- 
cgit v1.2.3-70-g09d2


From 9e385c56a1eecfb62dbc5162037fb4ed1676b27e Mon Sep 17 00:00:00 2001
From: "John W. Linville" <linville@tuxdriver.com>
Date: Mon, 10 May 2010 14:24:34 -0400
Subject: rtl8180: change PCI DMA mask to DMA_BIT_MASK(32)
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

From the original report:

"I had problems to get my rtl8185 PCI card running on Sparc64: I always
got an error about "No suitable DMA available" followed by an error
that no device could be detected. When comparing the rtl8180 driver to
others I noticed that others are mostly using DMA_BIT_MASK so I changed
the custom mask to DMA_BIT_MASK(32) which fixed my issue."

Reported-by: Tiziano Müller <tm@dev-zero.ch>
Acked-by: David S. Miller <davem@davemloft.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/rtl818x/rtl8180_dev.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

(limited to 'drivers/net/wireless')

diff --git a/drivers/net/wireless/rtl818x/rtl8180_dev.c b/drivers/net/wireless/rtl818x/rtl8180_dev.c
index cbdc5cfec90..9430f962c16 100644
--- a/drivers/net/wireless/rtl818x/rtl8180_dev.c
+++ b/drivers/net/wireless/rtl818x/rtl8180_dev.c
@@ -926,8 +926,8 @@ static int __devinit rtl8180_probe(struct pci_dev *pdev,
 		goto err_free_reg;
 	}
 
-	if ((err = pci_set_dma_mask(pdev, 0xFFFFFF00ULL)) ||
-	    (err = pci_set_consistent_dma_mask(pdev, 0xFFFFFF00ULL))) {
+	if ((err = pci_set_dma_mask(pdev, DMA_BIT_MASK(32))) ||
+	    (err = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(32)))) {
 		printk(KERN_ERR "%s (rtl8180): No suitable DMA available\n",
 		       pci_name(pdev));
 		goto err_free_reg;
-- 
cgit v1.2.3-70-g09d2


From 5efa3a6bf4dd1674920d7419cbde9d731cdb61f1 Mon Sep 17 00:00:00 2001
From: "Luis R. Rodriguez" <lrodriguez@atheros.com>
Date: Fri, 7 May 2010 18:23:22 -0400
Subject: ath9k_hw: enable PCIe low power mode for AR9003

Cc: Paul Shaw <paul.shaw@atheros.com>
Cc: Don Breslin <don.breslin@atheros.com>
Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/ath/ath9k/hw.c | 20 ++++++++++++++++++++
 1 file changed, 20 insertions(+)

(limited to 'drivers/net/wireless')

diff --git a/drivers/net/wireless/ath/ath9k/hw.c b/drivers/net/wireless/ath/ath9k/hw.c
index 8f37f1c2a38..f2d0389a66c 100644
--- a/drivers/net/wireless/ath/ath9k/hw.c
+++ b/drivers/net/wireless/ath/ath9k/hw.c
@@ -573,6 +573,26 @@ static int __ath9k_hw_init(struct ath_hw *ah)
 
 	ath9k_hw_init_mode_regs(ah);
 
+	/*
+	 * Configire PCIE after Ini init. SERDES values now come from ini file
+	 * This enables PCIe low power mode.
+	 */
+	if (AR_SREV_9300_20_OR_LATER(ah)) {
+		u32 regval;
+		unsigned int i;
+
+		/* Set Bits 16 and 17 in the AR_WA register. */
+		regval = REG_READ(ah, AR_WA);
+		regval |= 0x00030000;
+		REG_WRITE(ah, AR_WA, regval);
+
+		for (i = 0; i < ah->iniPcieSerdesLowPower.ia_rows; i++) {
+			REG_WRITE(ah,
+				  INI_RA(&ah->iniPcieSerdesLowPower, i, 0),
+				  INI_RA(&ah->iniPcieSerdesLowPower, i, 1));
+		}
+	}
+
 	if (ah->is_pciexpress)
 		ath9k_hw_configpcipowersave(ah, 0, 0);
 	else
-- 
cgit v1.2.3-70-g09d2


From 7ada88e5e5d7b465de8d0441b4a8d890a602074f Mon Sep 17 00:00:00 2001
From: Dan Carpenter <error27@gmail.com>
Date: Sat, 8 May 2010 18:21:01 +0200
Subject: iwlwifi: remove stray mutex_unlock()

This mutex_unlock() has been here from the initial commit, but as nearly
as I can tell, there isn't a reason for it.

Signed-off-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/iwlwifi/iwl-3945.c | 1 -
 1 file changed, 1 deletion(-)

(limited to 'drivers/net/wireless')

diff --git a/drivers/net/wireless/iwlwifi/iwl-3945.c b/drivers/net/wireless/iwlwifi/iwl-3945.c
index 9dad8672d70..3faa78ceaed 100644
--- a/drivers/net/wireless/iwlwifi/iwl-3945.c
+++ b/drivers/net/wireless/iwlwifi/iwl-3945.c
@@ -2482,7 +2482,6 @@ int iwl3945_hw_set_hw_params(struct iwl_priv *priv)
 				   &priv->_3945.shared_phys, GFP_KERNEL);
 	if (!priv->_3945.shared_virt) {
 		IWL_ERR(priv, "failed to allocate pci memory\n");
-		mutex_unlock(&priv->mutex);
 		return -ENOMEM;
 	}
 
-- 
cgit v1.2.3-70-g09d2


From 277a64d17ee819161242ce3059a9c2d0f8dfd29c Mon Sep 17 00:00:00 2001
From: Dan Carpenter <error27@gmail.com>
Date: Sat, 8 May 2010 18:23:20 +0200
Subject: ath9k/htc_drv_main: null dereference typo

This is a stray null dereference.  We initialize "ista" properly later on.

Signed-off-by: Dan Carpenter <error27@gmail.com>
Acked-by: Sujith <Sujith.Manoharan@atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/ath/ath9k/htc_drv_main.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'drivers/net/wireless')

diff --git a/drivers/net/wireless/ath/ath9k/htc_drv_main.c b/drivers/net/wireless/ath/ath9k/htc_drv_main.c
index f5035860526..e75db06e808 100644
--- a/drivers/net/wireless/ath/ath9k/htc_drv_main.c
+++ b/drivers/net/wireless/ath/ath9k/htc_drv_main.c
@@ -461,7 +461,7 @@ static int ath9k_htc_aggr_oper(struct ath9k_htc_priv *priv,
 	struct ath_common *common = ath9k_hw_common(priv->ah);
 	struct ath9k_htc_target_aggr aggr;
 	struct ieee80211_sta *sta = NULL;
-	struct ath9k_htc_sta *ista = (struct ath9k_htc_sta *) sta->drv_priv;
+	struct ath9k_htc_sta *ista;
 	int ret = 0;
 	u8 cmd_rsp;
 
-- 
cgit v1.2.3-70-g09d2


From 0730d114194364d078dbd0cfce708e8c67dccdfb Mon Sep 17 00:00:00 2001
From: Dan Carpenter <error27@gmail.com>
Date: Sat, 8 May 2010 18:24:02 +0200
Subject: ath9k/htc_drv_main: off by one error

I changed "> ATH9K_HTC_MAX_TID" to ">= ATH9K_HTC_MAX_TID" to avoid a
potential overflow.

Signed-off-by: Dan Carpenter <error27@gmail.com>
Acked-by: Sujith <Sujith.Manoharan@atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/ath/ath9k/htc_drv_main.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'drivers/net/wireless')

diff --git a/drivers/net/wireless/ath/ath9k/htc_drv_main.c b/drivers/net/wireless/ath/ath9k/htc_drv_main.c
index e75db06e808..6c386dad1d4 100644
--- a/drivers/net/wireless/ath/ath9k/htc_drv_main.c
+++ b/drivers/net/wireless/ath/ath9k/htc_drv_main.c
@@ -465,7 +465,7 @@ static int ath9k_htc_aggr_oper(struct ath9k_htc_priv *priv,
 	int ret = 0;
 	u8 cmd_rsp;
 
-	if (tid > ATH9K_HTC_MAX_TID)
+	if (tid >= ATH9K_HTC_MAX_TID)
 		return -EINVAL;
 
 	memset(&aggr, 0, sizeof(struct ath9k_htc_target_aggr));
-- 
cgit v1.2.3-70-g09d2


From 05e8594d5594acb62896571a7fe04faa647e0437 Mon Sep 17 00:00:00 2001
From: Dan Carpenter <error27@gmail.com>
Date: Sat, 8 May 2010 18:24:38 +0200
Subject: ath5k: several off by one range checks

There are several places that use > ARRAY_SIZE() instead of
>= ARRAY_SIZE().

Signed-off-by: Dan Carpenter <error27@gmail.com>
Acked-by: Bob Copeland <me@bobcopeland.com>
Acked-by: Bruno Randolf <br1@einfach.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/ath/ath5k/ani.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

(limited to 'drivers/net/wireless')

diff --git a/drivers/net/wireless/ath/ath5k/ani.c b/drivers/net/wireless/ath/ath5k/ani.c
index 584a32859bd..f2311ab3550 100644
--- a/drivers/net/wireless/ath/ath5k/ani.c
+++ b/drivers/net/wireless/ath/ath5k/ani.c
@@ -73,7 +73,7 @@ ath5k_ani_set_noise_immunity_level(struct ath5k_hw *ah, int level)
 	const s8 hi[] = { -14, -12 };
 	const s8 fr[] = { -78, -80 };
 #endif
-	if (level < 0 || level > ARRAY_SIZE(sz)) {
+	if (level < 0 || level >= ARRAY_SIZE(sz)) {
 		ATH5K_DBG_UNLIMIT(ah->ah_sc, ATH5K_DEBUG_ANI,
 			"level out of range %d", level);
 		return;
@@ -104,7 +104,7 @@ ath5k_ani_set_spur_immunity_level(struct ath5k_hw *ah, int level)
 {
 	const int val[] = { 2, 4, 6, 8, 10, 12, 14, 16 };
 
-	if (level < 0 || level > ARRAY_SIZE(val) ||
+	if (level < 0 || level >= ARRAY_SIZE(val) ||
 	    level > ah->ah_sc->ani_state.max_spur_level) {
 		ATH5K_DBG_UNLIMIT(ah->ah_sc, ATH5K_DEBUG_ANI,
 			"level out of range %d", level);
@@ -129,7 +129,7 @@ ath5k_ani_set_firstep_level(struct ath5k_hw *ah, int level)
 {
 	const int val[] = { 0, 4, 8 };
 
-	if (level < 0 || level > ARRAY_SIZE(val)) {
+	if (level < 0 || level >= ARRAY_SIZE(val)) {
 		ATH5K_DBG_UNLIMIT(ah->ah_sc, ATH5K_DEBUG_ANI,
 			"level out of range %d", level);
 		return;
-- 
cgit v1.2.3-70-g09d2


From d43e49ec83b7d1b1339205e1f3980a447658dc40 Mon Sep 17 00:00:00 2001
From: Gertjan van Wingerde <gwingerde@gmail.com>
Date: Sat, 8 May 2010 23:40:18 +0200
Subject: rt2x00: Fix setting of txdesc->length field.

We should take the stripping of the IV into account for the txdesc->length
field.

Signed-off-by: Gertjan van Wingerde <gwingerde@gmail.com>
Acked-by: Ivo van Doorn <IvDoorn@gmail.com>
Tested-by: Pavel Roskin <proski@gnu.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/rt2x00/rt2x00crypto.c | 1 +
 1 file changed, 1 insertion(+)

(limited to 'drivers/net/wireless')

diff --git a/drivers/net/wireless/rt2x00/rt2x00crypto.c b/drivers/net/wireless/rt2x00/rt2x00crypto.c
index d291c7862e1..583dacd8d24 100644
--- a/drivers/net/wireless/rt2x00/rt2x00crypto.c
+++ b/drivers/net/wireless/rt2x00/rt2x00crypto.c
@@ -128,6 +128,7 @@ void rt2x00crypto_tx_remove_iv(struct sk_buff *skb, struct txentry_desc *txdesc)
 
 	/* Pull buffer to correct size */
 	skb_pull(skb, txdesc->iv_len);
+	txdesc->length -= txdesc->iv_len;
 
 	/* IV/EIV data has officially been stripped */
 	skbdesc->flags |= SKBDESC_IV_STRIPPED;
-- 
cgit v1.2.3-70-g09d2


From e6a8aab1648226d64772a8224df0677f555a5632 Mon Sep 17 00:00:00 2001
From: Gertjan van Wingerde <gwingerde@gmail.com>
Date: Sat, 8 May 2010 23:40:19 +0200
Subject: rt2x00: Clean up rt2800usb.h.

Remove unused RXD_DESC_SIZE define and remove duplicated RXWI definitions
from rt2800.h.

Signed-off-by: Gertjan van Wingerde <gwingerde@gmail.com>
Acked-by: Ivo van Doorn <IvDoorn@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/rt2x00/rt2800usb.h | 40 ---------------------------------
 1 file changed, 40 deletions(-)

(limited to 'drivers/net/wireless')

diff --git a/drivers/net/wireless/rt2x00/rt2800usb.h b/drivers/net/wireless/rt2x00/rt2800usb.h
index d1d8ae94b4d..2bca6a71a7f 100644
--- a/drivers/net/wireless/rt2x00/rt2800usb.h
+++ b/drivers/net/wireless/rt2x00/rt2800usb.h
@@ -79,8 +79,6 @@
  */
 #define TXINFO_DESC_SIZE		( 1 * sizeof(__le32) )
 #define RXINFO_DESC_SIZE		( 1 * sizeof(__le32) )
-#define RXWI_DESC_SIZE			( 4 * sizeof(__le32) )
-#define RXD_DESC_SIZE			( 1 * sizeof(__le32) )
 
 /*
  * TX Info structure
@@ -112,44 +110,6 @@
 
 #define RXINFO_W0_USB_DMA_RX_PKT_LEN	FIELD32(0x0000ffff)
 
-/*
- * RX WI structure
- */
-
-/*
- * Word0
- */
-#define RXWI_W0_WIRELESS_CLI_ID		FIELD32(0x000000ff)
-#define RXWI_W0_KEY_INDEX		FIELD32(0x00000300)
-#define RXWI_W0_BSSID			FIELD32(0x00001c00)
-#define RXWI_W0_UDF			FIELD32(0x0000e000)
-#define RXWI_W0_MPDU_TOTAL_BYTE_COUNT	FIELD32(0x0fff0000)
-#define RXWI_W0_TID			FIELD32(0xf0000000)
-
-/*
- * Word1
- */
-#define RXWI_W1_FRAG			FIELD32(0x0000000f)
-#define RXWI_W1_SEQUENCE		FIELD32(0x0000fff0)
-#define RXWI_W1_MCS			FIELD32(0x007f0000)
-#define RXWI_W1_BW			FIELD32(0x00800000)
-#define RXWI_W1_SHORT_GI		FIELD32(0x01000000)
-#define RXWI_W1_STBC			FIELD32(0x06000000)
-#define RXWI_W1_PHYMODE			FIELD32(0xc0000000)
-
-/*
- * Word2
- */
-#define RXWI_W2_RSSI0			FIELD32(0x000000ff)
-#define RXWI_W2_RSSI1			FIELD32(0x0000ff00)
-#define RXWI_W2_RSSI2			FIELD32(0x00ff0000)
-
-/*
- * Word3
- */
-#define RXWI_W3_SNR0			FIELD32(0x000000ff)
-#define RXWI_W3_SNR1			FIELD32(0x0000ff00)
-
 /*
  * RX descriptor format for RX Ring.
  */
-- 
cgit v1.2.3-70-g09d2


From 78b8f3b0ddb061af1e3907f9c4bca76eae39f79f Mon Sep 17 00:00:00 2001
From: Gertjan van Wingerde <gwingerde@gmail.com>
Date: Sat, 8 May 2010 23:40:20 +0200
Subject: rt2x00: Don't check whether hardware crypto is enabled when reading
 RXD.

We should simply follow what the hardware told us it has done.

Signed-off-by: Gertjan van Wingerde <gwingerde@gmail.com>
Acked-by: Ivo van Doorn <IvDoorn@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/rt2x00/rt2500usb.c |  8 +++-----
 drivers/net/wireless/rt2x00/rt2800pci.c | 17 +++++++----------
 drivers/net/wireless/rt2x00/rt2800usb.c |  8 ++------
 drivers/net/wireless/rt2x00/rt61pci.c   |  8 ++------
 drivers/net/wireless/rt2x00/rt73usb.c   |  8 ++------
 5 files changed, 16 insertions(+), 33 deletions(-)

(limited to 'drivers/net/wireless')

diff --git a/drivers/net/wireless/rt2x00/rt2500usb.c b/drivers/net/wireless/rt2x00/rt2500usb.c
index c6e6e7b0ea5..f90b308899a 100644
--- a/drivers/net/wireless/rt2x00/rt2500usb.c
+++ b/drivers/net/wireless/rt2x00/rt2500usb.c
@@ -1213,11 +1213,9 @@ static void rt2500usb_fill_rxdone(struct queue_entry *entry,
 	if (rt2x00_get_field32(word0, RXD_W0_PHYSICAL_ERROR))
 		rxdesc->flags |= RX_FLAG_FAILED_PLCP_CRC;
 
-	if (test_bit(CONFIG_SUPPORT_HW_CRYPTO, &rt2x00dev->flags)) {
-		rxdesc->cipher = rt2x00_get_field32(word0, RXD_W0_CIPHER);
-		if (rt2x00_get_field32(word0, RXD_W0_CIPHER_ERROR))
-			rxdesc->cipher_status = RX_CRYPTO_FAIL_KEY;
-	}
+	rxdesc->cipher = rt2x00_get_field32(word0, RXD_W0_CIPHER);
+	if (rt2x00_get_field32(word0, RXD_W0_CIPHER_ERROR))
+		rxdesc->cipher_status = RX_CRYPTO_FAIL_KEY;
 
 	if (rxdesc->cipher != CIPHER_NONE) {
 		_rt2x00_desc_read(rxd, 2, &rxdesc->iv[0]);
diff --git a/drivers/net/wireless/rt2x00/rt2800pci.c b/drivers/net/wireless/rt2x00/rt2800pci.c
index df2c3fb8b4b..b9ec08180aa 100644
--- a/drivers/net/wireless/rt2x00/rt2800pci.c
+++ b/drivers/net/wireless/rt2x00/rt2800pci.c
@@ -840,16 +840,13 @@ static void rt2800pci_fill_rxdone(struct queue_entry *entry,
 	if (rt2x00_get_field32(rxd3, RXD_W3_CRC_ERROR))
 		rxdesc->flags |= RX_FLAG_FAILED_FCS_CRC;
 
-	if (test_bit(CONFIG_SUPPORT_HW_CRYPTO, &rt2x00dev->flags)) {
-		/*
-		 * Unfortunately we don't know the cipher type used during
-		 * decryption. This prevents us from correct providing
-		 * correct statistics through debugfs.
-		 */
-		rxdesc->cipher = rt2x00_get_field32(rxwi0, RXWI_W0_UDF);
-		rxdesc->cipher_status =
-		    rt2x00_get_field32(rxd3, RXD_W3_CIPHER_ERROR);
-	}
+	/*
+	 * Unfortunately we don't know the cipher type used during
+	 * decryption. This prevents us from correct providing
+	 * correct statistics through debugfs.
+	 */
+	rxdesc->cipher = rt2x00_get_field32(rxwi0, RXWI_W0_UDF);
+	rxdesc->cipher_status = rt2x00_get_field32(rxd3, RXD_W3_CIPHER_ERROR);
 
 	if (rt2x00_get_field32(rxd3, RXD_W3_DECRYPTED)) {
 		/*
diff --git a/drivers/net/wireless/rt2x00/rt2800usb.c b/drivers/net/wireless/rt2x00/rt2800usb.c
index 94b68127811..df7ad981b80 100644
--- a/drivers/net/wireless/rt2x00/rt2800usb.c
+++ b/drivers/net/wireless/rt2x00/rt2800usb.c
@@ -549,7 +549,6 @@ static void rt2800usb_kick_tx_queue(struct rt2x00_dev *rt2x00dev,
 static void rt2800usb_fill_rxdone(struct queue_entry *entry,
 				  struct rxdone_entry_desc *rxdesc)
 {
-	struct rt2x00_dev *rt2x00dev = entry->queue->rt2x00dev;
 	struct skb_frame_desc *skbdesc = get_skb_frame_desc(entry->skb);
 	__le32 *rxi = (__le32 *)entry->skb->data;
 	__le32 *rxwi;
@@ -595,11 +594,8 @@ static void rt2800usb_fill_rxdone(struct queue_entry *entry,
 	if (rt2x00_get_field32(rxd0, RXD_W0_CRC_ERROR))
 		rxdesc->flags |= RX_FLAG_FAILED_FCS_CRC;
 
-	if (test_bit(CONFIG_SUPPORT_HW_CRYPTO, &rt2x00dev->flags)) {
-		rxdesc->cipher = rt2x00_get_field32(rxwi0, RXWI_W0_UDF);
-		rxdesc->cipher_status =
-		    rt2x00_get_field32(rxd0, RXD_W0_CIPHER_ERROR);
-	}
+	rxdesc->cipher = rt2x00_get_field32(rxwi0, RXWI_W0_UDF);
+	rxdesc->cipher_status = rt2x00_get_field32(rxd0, RXD_W0_CIPHER_ERROR);
 
 	if (rt2x00_get_field32(rxd0, RXD_W0_DECRYPTED)) {
 		/*
diff --git a/drivers/net/wireless/rt2x00/rt61pci.c b/drivers/net/wireless/rt2x00/rt61pci.c
index 8099ecaf869..1b0c70d6569 100644
--- a/drivers/net/wireless/rt2x00/rt61pci.c
+++ b/drivers/net/wireless/rt2x00/rt61pci.c
@@ -1968,12 +1968,8 @@ static void rt61pci_fill_rxdone(struct queue_entry *entry,
 	if (rt2x00_get_field32(word0, RXD_W0_CRC_ERROR))
 		rxdesc->flags |= RX_FLAG_FAILED_FCS_CRC;
 
-	if (test_bit(CONFIG_SUPPORT_HW_CRYPTO, &rt2x00dev->flags)) {
-		rxdesc->cipher =
-		    rt2x00_get_field32(word0, RXD_W0_CIPHER_ALG);
-		rxdesc->cipher_status =
-		    rt2x00_get_field32(word0, RXD_W0_CIPHER_ERROR);
-	}
+	rxdesc->cipher = rt2x00_get_field32(word0, RXD_W0_CIPHER_ALG);
+	rxdesc->cipher_status = rt2x00_get_field32(word0, RXD_W0_CIPHER_ERROR);
 
 	if (rxdesc->cipher != CIPHER_NONE) {
 		_rt2x00_desc_read(entry_priv->desc, 2, &rxdesc->iv[0]);
diff --git a/drivers/net/wireless/rt2x00/rt73usb.c b/drivers/net/wireless/rt2x00/rt73usb.c
index 1399c18bc66..6acba620971 100644
--- a/drivers/net/wireless/rt2x00/rt73usb.c
+++ b/drivers/net/wireless/rt2x00/rt73usb.c
@@ -1644,12 +1644,8 @@ static void rt73usb_fill_rxdone(struct queue_entry *entry,
 	if (rt2x00_get_field32(word0, RXD_W0_CRC_ERROR))
 		rxdesc->flags |= RX_FLAG_FAILED_FCS_CRC;
 
-	if (test_bit(CONFIG_SUPPORT_HW_CRYPTO, &rt2x00dev->flags)) {
-		rxdesc->cipher =
-		    rt2x00_get_field32(word0, RXD_W0_CIPHER_ALG);
-		rxdesc->cipher_status =
-		    rt2x00_get_field32(word0, RXD_W0_CIPHER_ERROR);
-	}
+	rxdesc->cipher = rt2x00_get_field32(word0, RXD_W0_CIPHER_ALG);
+	rxdesc->cipher_status = rt2x00_get_field32(word0, RXD_W0_CIPHER_ERROR);
 
 	if (rxdesc->cipher != CIPHER_NONE) {
 		_rt2x00_desc_read(rxd, 2, &rxdesc->iv[0]);
-- 
cgit v1.2.3-70-g09d2


From 59679b91d1d33ebe90b72ffded9a57dba788fa6b Mon Sep 17 00:00:00 2001
From: Gertjan van Wingerde <gwingerde@gmail.com>
Date: Sat, 8 May 2010 23:40:21 +0200
Subject: rt2x00: Factor out TXWI writing to common rt2800 code.

TXWI writing is exactly the same for rt2800pci and rt2800usb, so
make it common code.

Signed-off-by: Gertjan van Wingerde <gwingerde@gmail.com>
Acked-by: Ivo van Doorn <IvDoorn@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/rt2x00/rt2800lib.c | 54 +++++++++++++++++++++++++++++++
 drivers/net/wireless/rt2x00/rt2800lib.h |  2 ++
 drivers/net/wireless/rt2x00/rt2800pci.c | 56 +--------------------------------
 drivers/net/wireless/rt2x00/rt2800usb.c | 50 ++---------------------------
 4 files changed, 60 insertions(+), 102 deletions(-)

(limited to 'drivers/net/wireless')

diff --git a/drivers/net/wireless/rt2x00/rt2800lib.c b/drivers/net/wireless/rt2x00/rt2800lib.c
index 525267d4cc3..28d82ce0552 100644
--- a/drivers/net/wireless/rt2x00/rt2800lib.c
+++ b/drivers/net/wireless/rt2x00/rt2800lib.c
@@ -281,6 +281,60 @@ int rt2800_wait_wpdma_ready(struct rt2x00_dev *rt2x00dev)
 }
 EXPORT_SYMBOL_GPL(rt2800_wait_wpdma_ready);
 
+void rt2800_write_txwi(struct sk_buff *skb, struct txentry_desc *txdesc)
+{
+	__le32 *txwi = (__le32 *)(skb->data - TXWI_DESC_SIZE);
+	u32 word;
+
+	/*
+	 * Initialize TX Info descriptor
+	 */
+	rt2x00_desc_read(txwi, 0, &word);
+	rt2x00_set_field32(&word, TXWI_W0_FRAG,
+			   test_bit(ENTRY_TXD_MORE_FRAG, &txdesc->flags));
+	rt2x00_set_field32(&word, TXWI_W0_MIMO_PS, 0);
+	rt2x00_set_field32(&word, TXWI_W0_CF_ACK, 0);
+	rt2x00_set_field32(&word, TXWI_W0_TS,
+			   test_bit(ENTRY_TXD_REQ_TIMESTAMP, &txdesc->flags));
+	rt2x00_set_field32(&word, TXWI_W0_AMPDU,
+			   test_bit(ENTRY_TXD_HT_AMPDU, &txdesc->flags));
+	rt2x00_set_field32(&word, TXWI_W0_MPDU_DENSITY, txdesc->mpdu_density);
+	rt2x00_set_field32(&word, TXWI_W0_TX_OP, txdesc->txop);
+	rt2x00_set_field32(&word, TXWI_W0_MCS, txdesc->mcs);
+	rt2x00_set_field32(&word, TXWI_W0_BW,
+			   test_bit(ENTRY_TXD_HT_BW_40, &txdesc->flags));
+	rt2x00_set_field32(&word, TXWI_W0_SHORT_GI,
+			   test_bit(ENTRY_TXD_HT_SHORT_GI, &txdesc->flags));
+	rt2x00_set_field32(&word, TXWI_W0_STBC, txdesc->stbc);
+	rt2x00_set_field32(&word, TXWI_W0_PHYMODE, txdesc->rate_mode);
+	rt2x00_desc_write(txwi, 0, word);
+
+	rt2x00_desc_read(txwi, 1, &word);
+	rt2x00_set_field32(&word, TXWI_W1_ACK,
+			   test_bit(ENTRY_TXD_ACK, &txdesc->flags));
+	rt2x00_set_field32(&word, TXWI_W1_NSEQ,
+			   test_bit(ENTRY_TXD_GENERATE_SEQ, &txdesc->flags));
+	rt2x00_set_field32(&word, TXWI_W1_BW_WIN_SIZE, txdesc->ba_size);
+	rt2x00_set_field32(&word, TXWI_W1_WIRELESS_CLI_ID,
+			   test_bit(ENTRY_TXD_ENCRYPT, &txdesc->flags) ?
+			   txdesc->key_idx : 0xff);
+	rt2x00_set_field32(&word, TXWI_W1_MPDU_TOTAL_BYTE_COUNT,
+			   txdesc->length);
+	rt2x00_set_field32(&word, TXWI_W1_PACKETID, txdesc->queue + 1);
+	rt2x00_desc_write(txwi, 1, word);
+
+	/*
+	 * Always write 0 to IV/EIV fields, hardware will insert the IV
+	 * from the IVEIV register when TXD_W3_WIV is set to 0.
+	 * When TXD_W3_WIV is set to 1 it will use the IV data
+	 * from the descriptor. The TXWI_W1_WIRELESS_CLI_ID indicates which
+	 * crypto entry in the registers should be used to encrypt the frame.
+	 */
+	_rt2x00_desc_write(txwi, 2, 0 /* skbdesc->iv[0] */);
+	_rt2x00_desc_write(txwi, 3, 0 /* skbdesc->iv[1] */);
+}
+EXPORT_SYMBOL_GPL(rt2800_write_txwi);
+
 #ifdef CONFIG_RT2X00_LIB_DEBUGFS
 const struct rt2x00debug rt2800_rt2x00debug = {
 	.owner	= THIS_MODULE,
diff --git a/drivers/net/wireless/rt2x00/rt2800lib.h b/drivers/net/wireless/rt2x00/rt2800lib.h
index ebabeae62d1..b805310e126 100644
--- a/drivers/net/wireless/rt2x00/rt2800lib.h
+++ b/drivers/net/wireless/rt2x00/rt2800lib.h
@@ -111,6 +111,8 @@ void rt2800_mcu_request(struct rt2x00_dev *rt2x00dev,
 			const u8 command, const u8 token,
 			const u8 arg0, const u8 arg1);
 
+void rt2800_write_txwi(struct sk_buff *skb, struct txentry_desc *txdesc);
+
 extern const struct rt2x00debug rt2800_rt2x00debug;
 
 int rt2800_rfkill_poll(struct rt2x00_dev *rt2x00dev);
diff --git a/drivers/net/wireless/rt2x00/rt2800pci.c b/drivers/net/wireless/rt2x00/rt2800pci.c
index b9ec08180aa..bd56cd16485 100644
--- a/drivers/net/wireless/rt2x00/rt2800pci.c
+++ b/drivers/net/wireless/rt2x00/rt2800pci.c
@@ -616,67 +616,13 @@ static int rt2800pci_set_device_state(struct rt2x00_dev *rt2x00dev,
 static int rt2800pci_write_tx_data(struct queue_entry* entry,
 				   struct txentry_desc *txdesc)
 {
-	struct rt2x00_dev *rt2x00dev = entry->queue->rt2x00dev;
-	struct sk_buff *skb = entry->skb;
-	struct skb_frame_desc *skbdesc;
 	int ret;
-	__le32 *txwi;
-	u32 word;
 
 	ret = rt2x00pci_write_tx_data(entry, txdesc);
 	if (ret)
 		return ret;
 
-	skbdesc = get_skb_frame_desc(skb);
-	txwi = (__le32 *)(skb->data - rt2x00dev->ops->extra_tx_headroom);
-
-	/*
-	 * Initialize TX Info descriptor
-	 */
-	rt2x00_desc_read(txwi, 0, &word);
-	rt2x00_set_field32(&word, TXWI_W0_FRAG,
-			   test_bit(ENTRY_TXD_MORE_FRAG, &txdesc->flags));
-	rt2x00_set_field32(&word, TXWI_W0_MIMO_PS, 0);
-	rt2x00_set_field32(&word, TXWI_W0_CF_ACK, 0);
-	rt2x00_set_field32(&word, TXWI_W0_TS,
-			   test_bit(ENTRY_TXD_REQ_TIMESTAMP, &txdesc->flags));
-	rt2x00_set_field32(&word, TXWI_W0_AMPDU,
-			   test_bit(ENTRY_TXD_HT_AMPDU, &txdesc->flags));
-	rt2x00_set_field32(&word, TXWI_W0_MPDU_DENSITY, txdesc->mpdu_density);
-	rt2x00_set_field32(&word, TXWI_W0_TX_OP, txdesc->txop);
-	rt2x00_set_field32(&word, TXWI_W0_MCS, txdesc->mcs);
-	rt2x00_set_field32(&word, TXWI_W0_BW,
-			   test_bit(ENTRY_TXD_HT_BW_40, &txdesc->flags));
-	rt2x00_set_field32(&word, TXWI_W0_SHORT_GI,
-			   test_bit(ENTRY_TXD_HT_SHORT_GI, &txdesc->flags));
-	rt2x00_set_field32(&word, TXWI_W0_STBC, txdesc->stbc);
-	rt2x00_set_field32(&word, TXWI_W0_PHYMODE, txdesc->rate_mode);
-	rt2x00_desc_write(txwi, 0, word);
-
-	rt2x00_desc_read(txwi, 1, &word);
-	rt2x00_set_field32(&word, TXWI_W1_ACK,
-			   test_bit(ENTRY_TXD_ACK, &txdesc->flags));
-	rt2x00_set_field32(&word, TXWI_W1_NSEQ,
-			   test_bit(ENTRY_TXD_GENERATE_SEQ, &txdesc->flags));
-	rt2x00_set_field32(&word, TXWI_W1_BW_WIN_SIZE, txdesc->ba_size);
-	rt2x00_set_field32(&word, TXWI_W1_WIRELESS_CLI_ID,
-			   test_bit(ENTRY_TXD_ENCRYPT, &txdesc->flags) ?
-			   txdesc->key_idx : 0xff);
-	rt2x00_set_field32(&word, TXWI_W1_MPDU_TOTAL_BYTE_COUNT,
-			   txdesc->length);
-	rt2x00_set_field32(&word, TXWI_W1_PACKETID,
-			   skbdesc->entry->queue->qid + 1);
-	rt2x00_desc_write(txwi, 1, word);
-
-	/*
-	 * Always write 0 to IV/EIV fields, hardware will insert the IV
-	 * from the IVEIV register when TXD_W3_WIV is set to 0.
-	 * When TXD_W3_WIV is set to 1 it will use the IV data
-	 * from the descriptor. The TXWI_W1_WIRELESS_CLI_ID indicates which
-	 * crypto entry in the registers should be used to encrypt the frame.
-	 */
-	_rt2x00_desc_write(txwi, 2, 0 /* skbdesc->iv[0] */);
-	_rt2x00_desc_write(txwi, 3, 0 /* skbdesc->iv[1] */);
+	rt2800_write_txwi(entry->skb, txdesc);
 
 	return 0;
 }
diff --git a/drivers/net/wireless/rt2x00/rt2800usb.c b/drivers/net/wireless/rt2x00/rt2800usb.c
index df7ad981b80..b39b858e0cf 100644
--- a/drivers/net/wireless/rt2x00/rt2800usb.c
+++ b/drivers/net/wireless/rt2x00/rt2800usb.c
@@ -401,59 +401,15 @@ static void rt2800usb_write_tx_desc(struct rt2x00_dev *rt2x00dev,
 {
 	struct skb_frame_desc *skbdesc = get_skb_frame_desc(skb);
 	__le32 *txi = skbdesc->desc;
-	__le32 *txwi = &txi[TXINFO_DESC_SIZE / sizeof(__le32)];
 	u32 word;
 
 	/*
-	 * Initialize TX Info descriptor
+	 * Initialize TXWI descriptor
 	 */
-	rt2x00_desc_read(txwi, 0, &word);
-	rt2x00_set_field32(&word, TXWI_W0_FRAG,
-			   test_bit(ENTRY_TXD_MORE_FRAG, &txdesc->flags));
-	rt2x00_set_field32(&word, TXWI_W0_MIMO_PS, 0);
-	rt2x00_set_field32(&word, TXWI_W0_CF_ACK, 0);
-	rt2x00_set_field32(&word, TXWI_W0_TS,
-			   test_bit(ENTRY_TXD_REQ_TIMESTAMP, &txdesc->flags));
-	rt2x00_set_field32(&word, TXWI_W0_AMPDU,
-			   test_bit(ENTRY_TXD_HT_AMPDU, &txdesc->flags));
-	rt2x00_set_field32(&word, TXWI_W0_MPDU_DENSITY, txdesc->mpdu_density);
-	rt2x00_set_field32(&word, TXWI_W0_TX_OP, txdesc->txop);
-	rt2x00_set_field32(&word, TXWI_W0_MCS, txdesc->mcs);
-	rt2x00_set_field32(&word, TXWI_W0_BW,
-			   test_bit(ENTRY_TXD_HT_BW_40, &txdesc->flags));
-	rt2x00_set_field32(&word, TXWI_W0_SHORT_GI,
-			   test_bit(ENTRY_TXD_HT_SHORT_GI, &txdesc->flags));
-	rt2x00_set_field32(&word, TXWI_W0_STBC, txdesc->stbc);
-	rt2x00_set_field32(&word, TXWI_W0_PHYMODE, txdesc->rate_mode);
-	rt2x00_desc_write(txwi, 0, word);
-
-	rt2x00_desc_read(txwi, 1, &word);
-	rt2x00_set_field32(&word, TXWI_W1_ACK,
-			   test_bit(ENTRY_TXD_ACK, &txdesc->flags));
-	rt2x00_set_field32(&word, TXWI_W1_NSEQ,
-			   test_bit(ENTRY_TXD_GENERATE_SEQ, &txdesc->flags));
-	rt2x00_set_field32(&word, TXWI_W1_BW_WIN_SIZE, txdesc->ba_size);
-	rt2x00_set_field32(&word, TXWI_W1_WIRELESS_CLI_ID,
-			   test_bit(ENTRY_TXD_ENCRYPT, &txdesc->flags) ?
-			   txdesc->key_idx : 0xff);
-	rt2x00_set_field32(&word, TXWI_W1_MPDU_TOTAL_BYTE_COUNT,
-			   txdesc->length);
-	rt2x00_set_field32(&word, TXWI_W1_PACKETID,
-			   skbdesc->entry->queue->qid + 1);
-	rt2x00_desc_write(txwi, 1, word);
+	rt2800_write_txwi(skb, txdesc);
 
 	/*
-	 * Always write 0 to IV/EIV fields, hardware will insert the IV
-	 * from the IVEIV register when TXINFO_W0_WIV is set to 0.
-	 * When TXINFO_W0_WIV is set to 1 it will use the IV data
-	 * from the descriptor. The TXWI_W1_WIRELESS_CLI_ID indicates which
-	 * crypto entry in the registers should be used to encrypt the frame.
-	 */
-	_rt2x00_desc_write(txwi, 2, 0 /* skbdesc->iv[0] */);
-	_rt2x00_desc_write(txwi, 3, 0 /* skbdesc->iv[1] */);
-
-	/*
-	 * Initialize TX descriptor
+	 * Initialize TXINFO descriptor
 	 */
 	rt2x00_desc_read(txi, 0, &word);
 	rt2x00_set_field32(&word, TXINFO_W0_USB_DMA_TX_PKT_LEN,
-- 
cgit v1.2.3-70-g09d2


From 2de64dd22d0390688b853788dcadee3c0ad9e518 Mon Sep 17 00:00:00 2001
From: Gertjan van Wingerde <gwingerde@gmail.com>
Date: Sat, 8 May 2010 23:40:22 +0200
Subject: rt2x00: Factor out RXWI processing to common rt2800 code.

RXWI processing is exactly the same for rt2800pci and rt2800usb, so
make it common code.

Signed-off-by: Gertjan van Wingerde <gwingerde@gmail.com>
Acked-by: Ivo van Doorn <IvDoorn@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/rt2x00/rt2800lib.c | 44 ++++++++++++++++++++
 drivers/net/wireless/rt2x00/rt2800lib.h |  1 +
 drivers/net/wireless/rt2x00/rt2800pci.c | 57 +++++--------------------
 drivers/net/wireless/rt2x00/rt2800usb.c | 74 ++++++++++-----------------------
 4 files changed, 79 insertions(+), 97 deletions(-)

(limited to 'drivers/net/wireless')

diff --git a/drivers/net/wireless/rt2x00/rt2800lib.c b/drivers/net/wireless/rt2x00/rt2800lib.c
index 28d82ce0552..7410ac1acaf 100644
--- a/drivers/net/wireless/rt2x00/rt2800lib.c
+++ b/drivers/net/wireless/rt2x00/rt2800lib.c
@@ -335,6 +335,50 @@ void rt2800_write_txwi(struct sk_buff *skb, struct txentry_desc *txdesc)
 }
 EXPORT_SYMBOL_GPL(rt2800_write_txwi);
 
+void rt2800_process_rxwi(struct sk_buff *skb, struct rxdone_entry_desc *rxdesc)
+{
+	__le32 *rxwi = (__le32 *) skb->data;
+	u32 word;
+
+	rt2x00_desc_read(rxwi, 0, &word);
+
+	rxdesc->cipher = rt2x00_get_field32(word, RXWI_W0_UDF);
+	rxdesc->size = rt2x00_get_field32(word, RXWI_W0_MPDU_TOTAL_BYTE_COUNT);
+
+	rt2x00_desc_read(rxwi, 1, &word);
+
+	if (rt2x00_get_field32(word, RXWI_W1_SHORT_GI))
+		rxdesc->flags |= RX_FLAG_SHORT_GI;
+
+	if (rt2x00_get_field32(word, RXWI_W1_BW))
+		rxdesc->flags |= RX_FLAG_40MHZ;
+
+	/*
+	 * Detect RX rate, always use MCS as signal type.
+	 */
+	rxdesc->dev_flags |= RXDONE_SIGNAL_MCS;
+	rxdesc->signal = rt2x00_get_field32(word, RXWI_W1_MCS);
+	rxdesc->rate_mode = rt2x00_get_field32(word, RXWI_W1_PHYMODE);
+
+	/*
+	 * Mask of 0x8 bit to remove the short preamble flag.
+	 */
+	if (rxdesc->rate_mode == RATE_MODE_CCK)
+		rxdesc->signal &= ~0x8;
+
+	rt2x00_desc_read(rxwi, 2, &word);
+
+	rxdesc->rssi =
+	    (rt2x00_get_field32(word, RXWI_W2_RSSI0) +
+	     rt2x00_get_field32(word, RXWI_W2_RSSI1)) / 2;
+
+	/*
+	 * Remove RXWI descriptor from start of buffer.
+	 */
+	skb_pull(skb, RXWI_DESC_SIZE);
+}
+EXPORT_SYMBOL_GPL(rt2800_process_rxwi);
+
 #ifdef CONFIG_RT2X00_LIB_DEBUGFS
 const struct rt2x00debug rt2800_rt2x00debug = {
 	.owner	= THIS_MODULE,
diff --git a/drivers/net/wireless/rt2x00/rt2800lib.h b/drivers/net/wireless/rt2x00/rt2800lib.h
index b805310e126..94de999e229 100644
--- a/drivers/net/wireless/rt2x00/rt2800lib.h
+++ b/drivers/net/wireless/rt2x00/rt2800lib.h
@@ -112,6 +112,7 @@ void rt2800_mcu_request(struct rt2x00_dev *rt2x00dev,
 			const u8 arg0, const u8 arg1);
 
 void rt2800_write_txwi(struct sk_buff *skb, struct txentry_desc *txdesc);
+void rt2800_process_rxwi(struct sk_buff *skb, struct rxdone_entry_desc *txdesc);
 
 extern const struct rt2x00debug rt2800_rt2x00debug;
 
diff --git a/drivers/net/wireless/rt2x00/rt2800pci.c b/drivers/net/wireless/rt2x00/rt2800pci.c
index bd56cd16485..308842a2e8b 100644
--- a/drivers/net/wireless/rt2x00/rt2800pci.c
+++ b/drivers/net/wireless/rt2x00/rt2800pci.c
@@ -770,20 +770,11 @@ static void rt2800pci_fill_rxdone(struct queue_entry *entry,
 	struct rt2x00_dev *rt2x00dev = entry->queue->rt2x00dev;
 	struct queue_entry_priv_pci *entry_priv = entry->priv_data;
 	__le32 *rxd = entry_priv->desc;
-	__le32 *rxwi = (__le32 *)entry->skb->data;
-	u32 rxd3;
-	u32 rxwi0;
-	u32 rxwi1;
-	u32 rxwi2;
-	u32 rxwi3;
-
-	rt2x00_desc_read(rxd, 3, &rxd3);
-	rt2x00_desc_read(rxwi, 0, &rxwi0);
-	rt2x00_desc_read(rxwi, 1, &rxwi1);
-	rt2x00_desc_read(rxwi, 2, &rxwi2);
-	rt2x00_desc_read(rxwi, 3, &rxwi3);
-
-	if (rt2x00_get_field32(rxd3, RXD_W3_CRC_ERROR))
+	u32 word;
+
+	rt2x00_desc_read(rxd, 3, &word);
+
+	if (rt2x00_get_field32(word, RXD_W3_CRC_ERROR))
 		rxdesc->flags |= RX_FLAG_FAILED_FCS_CRC;
 
 	/*
@@ -791,10 +782,9 @@ static void rt2800pci_fill_rxdone(struct queue_entry *entry,
 	 * decryption. This prevents us from correct providing
 	 * correct statistics through debugfs.
 	 */
-	rxdesc->cipher = rt2x00_get_field32(rxwi0, RXWI_W0_UDF);
-	rxdesc->cipher_status = rt2x00_get_field32(rxd3, RXD_W3_CIPHER_ERROR);
+	rxdesc->cipher_status = rt2x00_get_field32(word, RXD_W3_CIPHER_ERROR);
 
-	if (rt2x00_get_field32(rxd3, RXD_W3_DECRYPTED)) {
+	if (rt2x00_get_field32(word, RXD_W3_DECRYPTED)) {
 		/*
 		 * Hardware has stripped IV/EIV data from 802.11 frame during
 		 * decryption. Unfortunately the descriptor doesn't contain
@@ -809,47 +799,22 @@ static void rt2800pci_fill_rxdone(struct queue_entry *entry,
 			rxdesc->flags |= RX_FLAG_MMIC_ERROR;
 	}
 
-	if (rt2x00_get_field32(rxd3, RXD_W3_MY_BSS))
+	if (rt2x00_get_field32(word, RXD_W3_MY_BSS))
 		rxdesc->dev_flags |= RXDONE_MY_BSS;
 
-	if (rt2x00_get_field32(rxd3, RXD_W3_L2PAD))
+	if (rt2x00_get_field32(word, RXD_W3_L2PAD))
 		rxdesc->dev_flags |= RXDONE_L2PAD;
 
-	if (rt2x00_get_field32(rxwi1, RXWI_W1_SHORT_GI))
-		rxdesc->flags |= RX_FLAG_SHORT_GI;
-
-	if (rt2x00_get_field32(rxwi1, RXWI_W1_BW))
-		rxdesc->flags |= RX_FLAG_40MHZ;
-
 	/*
-	 * Detect RX rate, always use MCS as signal type.
+	 * Process the RXWI structure that is at the start of the buffer.
 	 */
-	rxdesc->dev_flags |= RXDONE_SIGNAL_MCS;
-	rxdesc->rate_mode = rt2x00_get_field32(rxwi1, RXWI_W1_PHYMODE);
-	rxdesc->signal = rt2x00_get_field32(rxwi1, RXWI_W1_MCS);
-
-	/*
-	 * Mask of 0x8 bit to remove the short preamble flag.
-	 */
-	if (rxdesc->rate_mode == RATE_MODE_CCK)
-		rxdesc->signal &= ~0x8;
-
-	rxdesc->rssi =
-	    (rt2x00_get_field32(rxwi2, RXWI_W2_RSSI0) +
-	     rt2x00_get_field32(rxwi2, RXWI_W2_RSSI1)) / 2;
-
-	rxdesc->size = rt2x00_get_field32(rxwi0, RXWI_W0_MPDU_TOTAL_BYTE_COUNT);
+	rt2800_process_rxwi(entry->skb, rxdesc);
 
 	/*
 	 * Set RX IDX in register to inform hardware that we have handled
 	 * this entry and it is available for reuse again.
 	 */
 	rt2800_register_write(rt2x00dev, RX_CRX_IDX, entry->entry_idx);
-
-	/*
-	 * Remove TXWI descriptor from start of buffer.
-	 */
-	skb_pull(entry->skb, RXWI_DESC_SIZE);
 }
 
 /*
diff --git a/drivers/net/wireless/rt2x00/rt2800usb.c b/drivers/net/wireless/rt2x00/rt2800usb.c
index b39b858e0cf..db371193b50 100644
--- a/drivers/net/wireless/rt2x00/rt2800usb.c
+++ b/drivers/net/wireless/rt2x00/rt2800usb.c
@@ -507,53 +507,45 @@ static void rt2800usb_fill_rxdone(struct queue_entry *entry,
 {
 	struct skb_frame_desc *skbdesc = get_skb_frame_desc(entry->skb);
 	__le32 *rxi = (__le32 *)entry->skb->data;
-	__le32 *rxwi;
 	__le32 *rxd;
-	u32 rxi0;
-	u32 rxwi0;
-	u32 rxwi1;
-	u32 rxwi2;
-	u32 rxwi3;
-	u32 rxd0;
+	u32 word;
 	int rx_pkt_len;
 
+	/*
+	 * Copy descriptor to the skbdesc->desc buffer, making it safe from
+	 * moving of frame data in rt2x00usb.
+	 */
+	memcpy(skbdesc->desc, rxi, skbdesc->desc_len);
+
 	/*
 	 * RX frame format is :
 	 * | RXINFO | RXWI | header | L2 pad | payload | pad | RXD | USB pad |
 	 *          |<------------ rx_pkt_len -------------->|
 	 */
-	rt2x00_desc_read(rxi, 0, &rxi0);
-	rx_pkt_len = rt2x00_get_field32(rxi0, RXINFO_W0_USB_DMA_RX_PKT_LEN);
-
-	rxwi = (__le32 *)(entry->skb->data + RXINFO_DESC_SIZE);
+	rt2x00_desc_read(rxi, 0, &word);
+	rx_pkt_len = rt2x00_get_field32(word, RXINFO_W0_USB_DMA_RX_PKT_LEN);
 
 	/*
-	 * FIXME : we need to check for rx_pkt_len validity
+	 * Remove the RXINFO structure from the sbk.
 	 */
-	rxd = (__le32 *)(entry->skb->data + RXINFO_DESC_SIZE + rx_pkt_len);
+	skb_pull(entry->skb, RXINFO_DESC_SIZE);
 
 	/*
-	 * Copy descriptor to the skbdesc->desc buffer, making it safe from
-	 * moving of frame data in rt2x00usb.
+	 * FIXME: we need to check for rx_pkt_len validity
 	 */
-	memcpy(skbdesc->desc, rxi, skbdesc->desc_len);
+	rxd = (__le32 *)(entry->skb->data + rx_pkt_len);
 
 	/*
 	 * It is now safe to read the descriptor on all architectures.
 	 */
-	rt2x00_desc_read(rxwi, 0, &rxwi0);
-	rt2x00_desc_read(rxwi, 1, &rxwi1);
-	rt2x00_desc_read(rxwi, 2, &rxwi2);
-	rt2x00_desc_read(rxwi, 3, &rxwi3);
-	rt2x00_desc_read(rxd, 0, &rxd0);
+	rt2x00_desc_read(rxd, 0, &word);
 
-	if (rt2x00_get_field32(rxd0, RXD_W0_CRC_ERROR))
+	if (rt2x00_get_field32(word, RXD_W0_CRC_ERROR))
 		rxdesc->flags |= RX_FLAG_FAILED_FCS_CRC;
 
-	rxdesc->cipher = rt2x00_get_field32(rxwi0, RXWI_W0_UDF);
-	rxdesc->cipher_status = rt2x00_get_field32(rxd0, RXD_W0_CIPHER_ERROR);
+	rxdesc->cipher_status = rt2x00_get_field32(word, RXD_W0_CIPHER_ERROR);
 
-	if (rt2x00_get_field32(rxd0, RXD_W0_DECRYPTED)) {
+	if (rt2x00_get_field32(word, RXD_W0_DECRYPTED)) {
 		/*
 		 * Hardware has stripped IV/EIV data from 802.11 frame during
 		 * decryption. Unfortunately the descriptor doesn't contain
@@ -568,41 +560,21 @@ static void rt2800usb_fill_rxdone(struct queue_entry *entry,
 			rxdesc->flags |= RX_FLAG_MMIC_ERROR;
 	}
 
-	if (rt2x00_get_field32(rxd0, RXD_W0_MY_BSS))
+	if (rt2x00_get_field32(word, RXD_W0_MY_BSS))
 		rxdesc->dev_flags |= RXDONE_MY_BSS;
 
-	if (rt2x00_get_field32(rxd0, RXD_W0_L2PAD))
+	if (rt2x00_get_field32(word, RXD_W0_L2PAD))
 		rxdesc->dev_flags |= RXDONE_L2PAD;
 
-	if (rt2x00_get_field32(rxwi1, RXWI_W1_SHORT_GI))
-		rxdesc->flags |= RX_FLAG_SHORT_GI;
-
-	if (rt2x00_get_field32(rxwi1, RXWI_W1_BW))
-		rxdesc->flags |= RX_FLAG_40MHZ;
-
 	/*
-	 * Detect RX rate, always use MCS as signal type.
+	 * Remove RXD descriptor from end of buffer.
 	 */
-	rxdesc->dev_flags |= RXDONE_SIGNAL_MCS;
-	rxdesc->rate_mode = rt2x00_get_field32(rxwi1, RXWI_W1_PHYMODE);
-	rxdesc->signal = rt2x00_get_field32(rxwi1, RXWI_W1_MCS);
-
-	/*
-	 * Mask of 0x8 bit to remove the short preamble flag.
-	 */
-	if (rxdesc->rate_mode == RATE_MODE_CCK)
-		rxdesc->signal &= ~0x8;
-
-	rxdesc->rssi =
-	    (rt2x00_get_field32(rxwi2, RXWI_W2_RSSI0) +
-	     rt2x00_get_field32(rxwi2, RXWI_W2_RSSI1)) / 2;
-
-	rxdesc->size = rt2x00_get_field32(rxwi0, RXWI_W0_MPDU_TOTAL_BYTE_COUNT);
+	skb_trim(entry->skb, rx_pkt_len);
 
 	/*
-	 * Remove RXWI descriptor from start of buffer.
+	 * Process the RXWI structure.
 	 */
-	skb_pull(entry->skb, skbdesc->desc_len);
+	rt2800_process_rxwi(entry->skb, rxdesc);
 }
 
 /*
-- 
cgit v1.2.3-70-g09d2


From d61cb26696e19494c049297def6c8f37d9e2f534 Mon Sep 17 00:00:00 2001
From: Gertjan van Wingerde <gwingerde@gmail.com>
Date: Sat, 8 May 2010 23:40:24 +0200
Subject: rt2x00: Clean up all driver's kick_tx_queue callback functions.

All of the driver's kick_tx_queue callback functions treat the TX queue
for beacons in a special manner.
Clean this up by integrating the kicking of the beacon queue into the
write_beacon callback function, and let the generic code no longer call
the kick_tx_queue callback function when updating the beacon.

Signed-off-by: Gertjan van Wingerde <gwingerde@gmail.com>
Acked-by: Ivo van Doorn <IvDoorn@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/rt2x00/rt2400pci.c   | 19 +++++------
 drivers/net/wireless/rt2x00/rt2500pci.c   | 19 +++++------
 drivers/net/wireless/rt2x00/rt2500usb.c   | 55 +++++++++++++------------------
 drivers/net/wireless/rt2x00/rt2800pci.c   | 20 +++++------
 drivers/net/wireless/rt2x00/rt2800usb.c   | 29 +++++-----------
 drivers/net/wireless/rt2x00/rt2x00queue.c |  5 +--
 drivers/net/wireless/rt2x00/rt61pci.c     | 30 ++++++++---------
 drivers/net/wireless/rt2x00/rt73usb.c     | 40 ++++++++--------------
 8 files changed, 83 insertions(+), 134 deletions(-)

(limited to 'drivers/net/wireless')

diff --git a/drivers/net/wireless/rt2x00/rt2400pci.c b/drivers/net/wireless/rt2x00/rt2400pci.c
index 6f898913492..9c13a4e0e73 100644
--- a/drivers/net/wireless/rt2x00/rt2400pci.c
+++ b/drivers/net/wireless/rt2x00/rt2400pci.c
@@ -1089,6 +1089,14 @@ static void rt2400pci_write_beacon(struct queue_entry *entry)
 	rt2x00_desc_read(entry_priv->desc, 1, &word);
 	rt2x00_set_field32(&word, TXD_W1_BUFFER_ADDRESS, skbdesc->skb_dma);
 	rt2x00_desc_write(entry_priv->desc, 1, word);
+
+	/*
+	 * Enable beaconing again.
+	 */
+	rt2x00_set_field32(&reg, CSR14_TSF_COUNT, 1);
+	rt2x00_set_field32(&reg, CSR14_TBCN, 1);
+	rt2x00_set_field32(&reg, CSR14_BEACON_GEN, 1);
+	rt2x00pci_register_write(rt2x00dev, CSR14, reg);
 }
 
 static void rt2400pci_kick_tx_queue(struct rt2x00_dev *rt2x00dev,
@@ -1096,17 +1104,6 @@ static void rt2400pci_kick_tx_queue(struct rt2x00_dev *rt2x00dev,
 {
 	u32 reg;
 
-	if (queue == QID_BEACON) {
-		rt2x00pci_register_read(rt2x00dev, CSR14, &reg);
-		if (!rt2x00_get_field32(reg, CSR14_BEACON_GEN)) {
-			rt2x00_set_field32(&reg, CSR14_TSF_COUNT, 1);
-			rt2x00_set_field32(&reg, CSR14_TBCN, 1);
-			rt2x00_set_field32(&reg, CSR14_BEACON_GEN, 1);
-			rt2x00pci_register_write(rt2x00dev, CSR14, reg);
-		}
-		return;
-	}
-
 	rt2x00pci_register_read(rt2x00dev, TXCSR0, &reg);
 	rt2x00_set_field32(&reg, TXCSR0_KICK_PRIO, (queue == QID_AC_BE));
 	rt2x00_set_field32(&reg, TXCSR0_KICK_TX, (queue == QID_AC_BK));
diff --git a/drivers/net/wireless/rt2x00/rt2500pci.c b/drivers/net/wireless/rt2x00/rt2500pci.c
index d9b630455e7..84ab56ec587 100644
--- a/drivers/net/wireless/rt2x00/rt2500pci.c
+++ b/drivers/net/wireless/rt2x00/rt2500pci.c
@@ -1246,6 +1246,14 @@ static void rt2500pci_write_beacon(struct queue_entry *entry)
 	rt2x00_desc_read(entry_priv->desc, 1, &word);
 	rt2x00_set_field32(&word, TXD_W1_BUFFER_ADDRESS, skbdesc->skb_dma);
 	rt2x00_desc_write(entry_priv->desc, 1, word);
+
+	/*
+	 * Enable beaconing again.
+	 */
+	rt2x00_set_field32(&reg, CSR14_TSF_COUNT, 1);
+	rt2x00_set_field32(&reg, CSR14_TBCN, 1);
+	rt2x00_set_field32(&reg, CSR14_BEACON_GEN, 1);
+	rt2x00pci_register_write(rt2x00dev, CSR14, reg);
 }
 
 static void rt2500pci_kick_tx_queue(struct rt2x00_dev *rt2x00dev,
@@ -1253,17 +1261,6 @@ static void rt2500pci_kick_tx_queue(struct rt2x00_dev *rt2x00dev,
 {
 	u32 reg;
 
-	if (queue == QID_BEACON) {
-		rt2x00pci_register_read(rt2x00dev, CSR14, &reg);
-		if (!rt2x00_get_field32(reg, CSR14_BEACON_GEN)) {
-			rt2x00_set_field32(&reg, CSR14_TSF_COUNT, 1);
-			rt2x00_set_field32(&reg, CSR14_TBCN, 1);
-			rt2x00_set_field32(&reg, CSR14_BEACON_GEN, 1);
-			rt2x00pci_register_write(rt2x00dev, CSR14, reg);
-		}
-		return;
-	}
-
 	rt2x00pci_register_read(rt2x00dev, TXCSR0, &reg);
 	rt2x00_set_field32(&reg, TXCSR0_KICK_PRIO, (queue == QID_AC_BE));
 	rt2x00_set_field32(&reg, TXCSR0_KICK_TX, (queue == QID_AC_BK));
diff --git a/drivers/net/wireless/rt2x00/rt2500usb.c b/drivers/net/wireless/rt2x00/rt2500usb.c
index f90b308899a..5ee9b9fd77b 100644
--- a/drivers/net/wireless/rt2x00/rt2500usb.c
+++ b/drivers/net/wireless/rt2x00/rt2500usb.c
@@ -1090,7 +1090,7 @@ static void rt2500usb_write_beacon(struct queue_entry *entry)
 	struct skb_frame_desc *skbdesc = get_skb_frame_desc(entry->skb);
 	int pipe = usb_sndbulkpipe(usb_dev, entry->queue->usb_endpoint);
 	int length;
-	u16 reg;
+	u16 reg, reg0;
 
 	/*
 	 * Add the descriptor in front of the skb.
@@ -1132,6 +1132,26 @@ static void rt2500usb_write_beacon(struct queue_entry *entry)
 	 * Send out the guardian byte.
 	 */
 	usb_submit_urb(bcn_priv->guardian_urb, GFP_ATOMIC);
+
+	/*
+	 * Enable beaconing again.
+	 */
+	rt2x00_set_field16(&reg, TXRX_CSR19_TSF_COUNT, 1);
+	rt2x00_set_field16(&reg, TXRX_CSR19_TBCN, 1);
+	reg0 = reg;
+	rt2x00_set_field16(&reg, TXRX_CSR19_BEACON_GEN, 1);
+	/*
+	 * Beacon generation will fail initially.
+	 * To prevent this we need to change the TXRX_CSR19
+	 * register several times (reg0 is the same as reg
+	 * except for TXRX_CSR19_BEACON_GEN, which is 0 in reg0
+	 * and 1 in reg).
+	 */
+	rt2500usb_register_write(rt2x00dev, TXRX_CSR19, reg);
+	rt2500usb_register_write(rt2x00dev, TXRX_CSR19, reg0);
+	rt2500usb_register_write(rt2x00dev, TXRX_CSR19, reg);
+	rt2500usb_register_write(rt2x00dev, TXRX_CSR19, reg0);
+	rt2500usb_register_write(rt2x00dev, TXRX_CSR19, reg);
 }
 
 static int rt2500usb_get_tx_data_len(struct queue_entry *entry)
@@ -1148,37 +1168,6 @@ static int rt2500usb_get_tx_data_len(struct queue_entry *entry)
 	return length;
 }
 
-static void rt2500usb_kick_tx_queue(struct rt2x00_dev *rt2x00dev,
-				    const enum data_queue_qid queue)
-{
-	u16 reg, reg0;
-
-	if (queue != QID_BEACON) {
-		rt2x00usb_kick_tx_queue(rt2x00dev, queue);
-		return;
-	}
-
-	rt2500usb_register_read(rt2x00dev, TXRX_CSR19, &reg);
-	if (!rt2x00_get_field16(reg, TXRX_CSR19_BEACON_GEN)) {
-		rt2x00_set_field16(&reg, TXRX_CSR19_TSF_COUNT, 1);
-		rt2x00_set_field16(&reg, TXRX_CSR19_TBCN, 1);
-		reg0 = reg;
-		rt2x00_set_field16(&reg, TXRX_CSR19_BEACON_GEN, 1);
-		/*
-		 * Beacon generation will fail initially.
-		 * To prevent this we need to change the TXRX_CSR19
-		 * register several times (reg0 is the same as reg
-		 * except for TXRX_CSR19_BEACON_GEN, which is 0 in reg0
-		 * and 1 in reg).
-		 */
-		rt2500usb_register_write(rt2x00dev, TXRX_CSR19, reg);
-		rt2500usb_register_write(rt2x00dev, TXRX_CSR19, reg0);
-		rt2500usb_register_write(rt2x00dev, TXRX_CSR19, reg);
-		rt2500usb_register_write(rt2x00dev, TXRX_CSR19, reg0);
-		rt2500usb_register_write(rt2x00dev, TXRX_CSR19, reg);
-	}
-}
-
 /*
  * RX control handlers
  */
@@ -1777,7 +1766,7 @@ static const struct rt2x00lib_ops rt2500usb_rt2x00_ops = {
 	.write_tx_data		= rt2x00usb_write_tx_data,
 	.write_beacon		= rt2500usb_write_beacon,
 	.get_tx_data_len	= rt2500usb_get_tx_data_len,
-	.kick_tx_queue		= rt2500usb_kick_tx_queue,
+	.kick_tx_queue		= rt2x00usb_kick_tx_queue,
 	.kill_tx_queue		= rt2x00usb_kill_tx_queue,
 	.fill_rxdone		= rt2500usb_fill_rxdone,
 	.config_shared_key	= rt2500usb_config_key,
diff --git a/drivers/net/wireless/rt2x00/rt2800pci.c b/drivers/net/wireless/rt2x00/rt2800pci.c
index 308842a2e8b..6d564607bbb 100644
--- a/drivers/net/wireless/rt2x00/rt2800pci.c
+++ b/drivers/net/wireless/rt2x00/rt2800pci.c
@@ -704,6 +704,14 @@ static void rt2800pci_write_beacon(struct queue_entry *entry)
 				      beacon_base + skbdesc->desc_len,
 				      entry->skb->data, entry->skb->len);
 
+	/*
+	 * Enable beaconing again.
+	 */
+	rt2x00_set_field32(&reg, BCN_TIME_CFG_TSF_TICKING, 1);
+	rt2x00_set_field32(&reg, BCN_TIME_CFG_TBTT_ENABLE, 1);
+	rt2x00_set_field32(&reg, BCN_TIME_CFG_BEACON_GEN, 1);
+	rt2800_register_write(rt2x00dev, BCN_TIME_CFG, reg);
+
 	/*
 	 * Clean up beacon skb.
 	 */
@@ -716,18 +724,6 @@ static void rt2800pci_kick_tx_queue(struct rt2x00_dev *rt2x00dev,
 {
 	struct data_queue *queue;
 	unsigned int idx, qidx = 0;
-	u32 reg;
-
-	if (queue_idx == QID_BEACON) {
-		rt2800_register_read(rt2x00dev, BCN_TIME_CFG, &reg);
-		if (!rt2x00_get_field32(reg, BCN_TIME_CFG_BEACON_GEN)) {
-			rt2x00_set_field32(&reg, BCN_TIME_CFG_TSF_TICKING, 1);
-			rt2x00_set_field32(&reg, BCN_TIME_CFG_TBTT_ENABLE, 1);
-			rt2x00_set_field32(&reg, BCN_TIME_CFG_BEACON_GEN, 1);
-			rt2800_register_write(rt2x00dev, BCN_TIME_CFG, reg);
-		}
-		return;
-	}
 
 	if (queue_idx > QID_HCCA && queue_idx != QID_MGMT)
 		return;
diff --git a/drivers/net/wireless/rt2x00/rt2800usb.c b/drivers/net/wireless/rt2x00/rt2800usb.c
index db371193b50..dbec71852f0 100644
--- a/drivers/net/wireless/rt2x00/rt2800usb.c
+++ b/drivers/net/wireless/rt2x00/rt2800usb.c
@@ -458,6 +458,14 @@ static void rt2800usb_write_beacon(struct queue_entry *entry)
 					    entry->skb->data, entry->skb->len,
 					    REGISTER_TIMEOUT32(entry->skb->len));
 
+	/*
+	 * Enable beaconing again.
+	 */
+	rt2x00_set_field32(&reg, BCN_TIME_CFG_TSF_TICKING, 1);
+	rt2x00_set_field32(&reg, BCN_TIME_CFG_TBTT_ENABLE, 1);
+	rt2x00_set_field32(&reg, BCN_TIME_CFG_BEACON_GEN, 1);
+	rt2800_register_write(rt2x00dev, BCN_TIME_CFG, reg);
+
 	/*
 	 * Clean up the beacon skb.
 	 */
@@ -480,25 +488,6 @@ static int rt2800usb_get_tx_data_len(struct queue_entry *entry)
 	return length;
 }
 
-static void rt2800usb_kick_tx_queue(struct rt2x00_dev *rt2x00dev,
-				    const enum data_queue_qid queue)
-{
-	u32 reg;
-
-	if (queue != QID_BEACON) {
-		rt2x00usb_kick_tx_queue(rt2x00dev, queue);
-		return;
-	}
-
-	rt2800_register_read(rt2x00dev, BCN_TIME_CFG, &reg);
-	if (!rt2x00_get_field32(reg, BCN_TIME_CFG_BEACON_GEN)) {
-		rt2x00_set_field32(&reg, BCN_TIME_CFG_TSF_TICKING, 1);
-		rt2x00_set_field32(&reg, BCN_TIME_CFG_TBTT_ENABLE, 1);
-		rt2x00_set_field32(&reg, BCN_TIME_CFG_BEACON_GEN, 1);
-		rt2800_register_write(rt2x00dev, BCN_TIME_CFG, reg);
-	}
-}
-
 /*
  * RX control handlers
  */
@@ -667,7 +656,7 @@ static const struct rt2x00lib_ops rt2800usb_rt2x00_ops = {
 	.write_tx_data		= rt2x00usb_write_tx_data,
 	.write_beacon		= rt2800usb_write_beacon,
 	.get_tx_data_len	= rt2800usb_get_tx_data_len,
-	.kick_tx_queue		= rt2800usb_kick_tx_queue,
+	.kick_tx_queue		= rt2x00usb_kick_tx_queue,
 	.kill_tx_queue		= rt2x00usb_kill_tx_queue,
 	.fill_rxdone		= rt2800usb_fill_rxdone,
 	.config_shared_key	= rt2800_config_shared_key,
diff --git a/drivers/net/wireless/rt2x00/rt2x00queue.c b/drivers/net/wireless/rt2x00/rt2x00queue.c
index 59d9459acfa..949aaad0cbd 100644
--- a/drivers/net/wireless/rt2x00/rt2x00queue.c
+++ b/drivers/net/wireless/rt2x00/rt2x00queue.c
@@ -602,12 +602,9 @@ int rt2x00queue_update_beacon(struct rt2x00_dev *rt2x00dev,
 	rt2x00queue_write_tx_descriptor(intf->beacon, &txdesc);
 
 	/*
-	 * Send beacon to hardware.
-	 * Also enable beacon generation, which might have been disabled
-	 * by the driver during the config_beacon() callback function.
+	 * Send beacon to hardware and enable beacon genaration..
 	 */
 	rt2x00dev->ops->lib->write_beacon(intf->beacon);
-	rt2x00dev->ops->lib->kick_tx_queue(rt2x00dev, QID_BEACON);
 
 	mutex_unlock(&intf->beacon_skb_mutex);
 
diff --git a/drivers/net/wireless/rt2x00/rt61pci.c b/drivers/net/wireless/rt2x00/rt61pci.c
index 1b0c70d6569..9e3a1ee426e 100644
--- a/drivers/net/wireless/rt2x00/rt61pci.c
+++ b/drivers/net/wireless/rt2x00/rt61pci.c
@@ -1868,6 +1868,19 @@ static void rt61pci_write_beacon(struct queue_entry *entry)
 				      beacon_base + skbdesc->desc_len,
 				      entry->skb->data, entry->skb->len);
 
+	/*
+	 * Enable beaconing again.
+	 *
+	 * For Wi-Fi faily generated beacons between participating
+	 * stations. Set TBTT phase adaptive adjustment step to 8us.
+	 */
+	rt2x00pci_register_write(rt2x00dev, TXRX_CSR10, 0x00001008);
+
+	rt2x00_set_field32(&reg, TXRX_CSR9_TSF_TICKING, 1);
+	rt2x00_set_field32(&reg, TXRX_CSR9_TBTT_ENABLE, 1);
+	rt2x00_set_field32(&reg, TXRX_CSR9_BEACON_GEN, 1);
+	rt2x00pci_register_write(rt2x00dev, TXRX_CSR9, reg);
+
 	/*
 	 * Clean up beacon skb.
 	 */
@@ -1880,23 +1893,6 @@ static void rt61pci_kick_tx_queue(struct rt2x00_dev *rt2x00dev,
 {
 	u32 reg;
 
-	if (queue == QID_BEACON) {
-		/*
-		 * For Wi-Fi faily generated beacons between participating
-		 * stations. Set TBTT phase adaptive adjustment step to 8us.
-		 */
-		rt2x00pci_register_write(rt2x00dev, TXRX_CSR10, 0x00001008);
-
-		rt2x00pci_register_read(rt2x00dev, TXRX_CSR9, &reg);
-		if (!rt2x00_get_field32(reg, TXRX_CSR9_BEACON_GEN)) {
-			rt2x00_set_field32(&reg, TXRX_CSR9_TSF_TICKING, 1);
-			rt2x00_set_field32(&reg, TXRX_CSR9_TBTT_ENABLE, 1);
-			rt2x00_set_field32(&reg, TXRX_CSR9_BEACON_GEN, 1);
-			rt2x00pci_register_write(rt2x00dev, TXRX_CSR9, reg);
-		}
-		return;
-	}
-
 	rt2x00pci_register_read(rt2x00dev, TX_CNTL_CSR, &reg);
 	rt2x00_set_field32(&reg, TX_CNTL_CSR_KICK_TX_AC0, (queue == QID_AC_BE));
 	rt2x00_set_field32(&reg, TX_CNTL_CSR_KICK_TX_AC1, (queue == QID_AC_BK));
diff --git a/drivers/net/wireless/rt2x00/rt73usb.c b/drivers/net/wireless/rt2x00/rt73usb.c
index 6acba620971..ca3707af4b4 100644
--- a/drivers/net/wireless/rt2x00/rt73usb.c
+++ b/drivers/net/wireless/rt2x00/rt73usb.c
@@ -1535,6 +1535,19 @@ static void rt73usb_write_beacon(struct queue_entry *entry)
 					    entry->skb->data, entry->skb->len,
 					    REGISTER_TIMEOUT32(entry->skb->len));
 
+	/*
+	 * Enable beaconing again.
+	 *
+	 * For Wi-Fi faily generated beacons between participating stations.
+	 * Set TBTT phase adaptive adjustment step to 8us (default 16us)
+	 */
+	rt2x00usb_register_write(rt2x00dev, TXRX_CSR10, 0x00001008);
+
+	rt2x00_set_field32(&reg, TXRX_CSR9_TSF_TICKING, 1);
+	rt2x00_set_field32(&reg, TXRX_CSR9_TBTT_ENABLE, 1);
+	rt2x00_set_field32(&reg, TXRX_CSR9_BEACON_GEN, 1);
+	rt2x00usb_register_write(rt2x00dev, TXRX_CSR9, reg);
+
 	/*
 	 * Clean up the beacon skb.
 	 */
@@ -1556,31 +1569,6 @@ static int rt73usb_get_tx_data_len(struct queue_entry *entry)
 	return length;
 }
 
-static void rt73usb_kick_tx_queue(struct rt2x00_dev *rt2x00dev,
-				  const enum data_queue_qid queue)
-{
-	u32 reg;
-
-	if (queue != QID_BEACON) {
-		rt2x00usb_kick_tx_queue(rt2x00dev, queue);
-		return;
-	}
-
-	/*
-	 * For Wi-Fi faily generated beacons between participating stations.
-	 * Set TBTT phase adaptive adjustment step to 8us (default 16us)
-	 */
-	rt2x00usb_register_write(rt2x00dev, TXRX_CSR10, 0x00001008);
-
-	rt2x00usb_register_read(rt2x00dev, TXRX_CSR9, &reg);
-	if (!rt2x00_get_field32(reg, TXRX_CSR9_BEACON_GEN)) {
-		rt2x00_set_field32(&reg, TXRX_CSR9_TSF_TICKING, 1);
-		rt2x00_set_field32(&reg, TXRX_CSR9_TBTT_ENABLE, 1);
-		rt2x00_set_field32(&reg, TXRX_CSR9_BEACON_GEN, 1);
-		rt2x00usb_register_write(rt2x00dev, TXRX_CSR9, reg);
-	}
-}
-
 /*
  * RX control handlers
  */
@@ -2261,7 +2249,7 @@ static const struct rt2x00lib_ops rt73usb_rt2x00_ops = {
 	.write_tx_data		= rt2x00usb_write_tx_data,
 	.write_beacon		= rt73usb_write_beacon,
 	.get_tx_data_len	= rt73usb_get_tx_data_len,
-	.kick_tx_queue		= rt73usb_kick_tx_queue,
+	.kick_tx_queue		= rt2x00usb_kick_tx_queue,
 	.kill_tx_queue		= rt2x00usb_kill_tx_queue,
 	.fill_rxdone		= rt73usb_fill_rxdone,
 	.config_shared_key	= rt73usb_config_shared_key,
-- 
cgit v1.2.3-70-g09d2


From f224f4ef794c4a9146a7fa7303018fecab8c9328 Mon Sep 17 00:00:00 2001
From: Gertjan van Wingerde <gwingerde@gmail.com>
Date: Sat, 8 May 2010 23:40:25 +0200
Subject: rt2x00: provide beacon's txdesc to write_beacon callback function.

Preparation to fix rt2800 beaconing.

Signed-off-by: Gertjan van Wingerde <gwingerde@gmail.com>
Acked-by: Ivo van Doorn <IvDoorn@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/rt2x00/rt2400pci.c   | 3 ++-
 drivers/net/wireless/rt2x00/rt2500pci.c   | 3 ++-
 drivers/net/wireless/rt2x00/rt2500usb.c   | 3 ++-
 drivers/net/wireless/rt2x00/rt2800pci.c   | 3 ++-
 drivers/net/wireless/rt2x00/rt2800usb.c   | 3 ++-
 drivers/net/wireless/rt2x00/rt2x00.h      | 3 ++-
 drivers/net/wireless/rt2x00/rt2x00queue.c | 2 +-
 drivers/net/wireless/rt2x00/rt61pci.c     | 3 ++-
 drivers/net/wireless/rt2x00/rt73usb.c     | 3 ++-
 9 files changed, 17 insertions(+), 9 deletions(-)

(limited to 'drivers/net/wireless')

diff --git a/drivers/net/wireless/rt2x00/rt2400pci.c b/drivers/net/wireless/rt2x00/rt2400pci.c
index 9c13a4e0e73..4b3845152e1 100644
--- a/drivers/net/wireless/rt2x00/rt2400pci.c
+++ b/drivers/net/wireless/rt2x00/rt2400pci.c
@@ -1059,7 +1059,8 @@ static void rt2400pci_write_tx_desc(struct rt2x00_dev *rt2x00dev,
 /*
  * TX data initialization
  */
-static void rt2400pci_write_beacon(struct queue_entry *entry)
+static void rt2400pci_write_beacon(struct queue_entry *entry,
+				   struct txentry_desc *txdesc)
 {
 	struct rt2x00_dev *rt2x00dev = entry->queue->rt2x00dev;
 	struct queue_entry_priv_pci *entry_priv = entry->priv_data;
diff --git a/drivers/net/wireless/rt2x00/rt2500pci.c b/drivers/net/wireless/rt2x00/rt2500pci.c
index 84ab56ec587..d876c6d8759 100644
--- a/drivers/net/wireless/rt2x00/rt2500pci.c
+++ b/drivers/net/wireless/rt2x00/rt2500pci.c
@@ -1216,7 +1216,8 @@ static void rt2500pci_write_tx_desc(struct rt2x00_dev *rt2x00dev,
 /*
  * TX data initialization
  */
-static void rt2500pci_write_beacon(struct queue_entry *entry)
+static void rt2500pci_write_beacon(struct queue_entry *entry,
+				   struct txentry_desc *txdesc)
 {
 	struct rt2x00_dev *rt2x00dev = entry->queue->rt2x00dev;
 	struct queue_entry_priv_pci *entry_priv = entry->priv_data;
diff --git a/drivers/net/wireless/rt2x00/rt2500usb.c b/drivers/net/wireless/rt2x00/rt2500usb.c
index 5ee9b9fd77b..30c0544e803 100644
--- a/drivers/net/wireless/rt2x00/rt2500usb.c
+++ b/drivers/net/wireless/rt2x00/rt2500usb.c
@@ -1082,7 +1082,8 @@ static void rt2500usb_write_tx_desc(struct rt2x00_dev *rt2x00dev,
  */
 static void rt2500usb_beacondone(struct urb *urb);
 
-static void rt2500usb_write_beacon(struct queue_entry *entry)
+static void rt2500usb_write_beacon(struct queue_entry *entry,
+				   struct txentry_desc *txdesc)
 {
 	struct rt2x00_dev *rt2x00dev = entry->queue->rt2x00dev;
 	struct usb_device *usb_dev = to_usb_device_intf(rt2x00dev->dev);
diff --git a/drivers/net/wireless/rt2x00/rt2800pci.c b/drivers/net/wireless/rt2x00/rt2800pci.c
index 6d564607bbb..80c67681cf9 100644
--- a/drivers/net/wireless/rt2x00/rt2800pci.c
+++ b/drivers/net/wireless/rt2x00/rt2800pci.c
@@ -678,7 +678,8 @@ static void rt2800pci_write_tx_desc(struct rt2x00_dev *rt2x00dev,
 /*
  * TX data initialization
  */
-static void rt2800pci_write_beacon(struct queue_entry *entry)
+static void rt2800pci_write_beacon(struct queue_entry *entry,
+				   struct txentry_desc *txdesc)
 {
 	struct rt2x00_dev *rt2x00dev = entry->queue->rt2x00dev;
 	struct skb_frame_desc *skbdesc = get_skb_frame_desc(entry->skb);
diff --git a/drivers/net/wireless/rt2x00/rt2800usb.c b/drivers/net/wireless/rt2x00/rt2800usb.c
index dbec71852f0..d992a9352ed 100644
--- a/drivers/net/wireless/rt2x00/rt2800usb.c
+++ b/drivers/net/wireless/rt2x00/rt2800usb.c
@@ -427,7 +427,8 @@ static void rt2800usb_write_tx_desc(struct rt2x00_dev *rt2x00dev,
 /*
  * TX data initialization
  */
-static void rt2800usb_write_beacon(struct queue_entry *entry)
+static void rt2800usb_write_beacon(struct queue_entry *entry,
+				   struct txentry_desc *txdesc)
 {
 	struct rt2x00_dev *rt2x00dev = entry->queue->rt2x00dev;
 	struct skb_frame_desc *skbdesc = get_skb_frame_desc(entry->skb);
diff --git a/drivers/net/wireless/rt2x00/rt2x00.h b/drivers/net/wireless/rt2x00/rt2x00.h
index 4f9b666f7a7..6c1ff4c15c8 100644
--- a/drivers/net/wireless/rt2x00/rt2x00.h
+++ b/drivers/net/wireless/rt2x00/rt2x00.h
@@ -551,7 +551,8 @@ struct rt2x00lib_ops {
 			       struct txentry_desc *txdesc);
 	int (*write_tx_data) (struct queue_entry *entry,
 			      struct txentry_desc *txdesc);
-	void (*write_beacon) (struct queue_entry *entry);
+	void (*write_beacon) (struct queue_entry *entry,
+			      struct txentry_desc *txdesc);
 	int (*get_tx_data_len) (struct queue_entry *entry);
 	void (*kick_tx_queue) (struct rt2x00_dev *rt2x00dev,
 			       const enum data_queue_qid queue);
diff --git a/drivers/net/wireless/rt2x00/rt2x00queue.c b/drivers/net/wireless/rt2x00/rt2x00queue.c
index 949aaad0cbd..12ec68577f9 100644
--- a/drivers/net/wireless/rt2x00/rt2x00queue.c
+++ b/drivers/net/wireless/rt2x00/rt2x00queue.c
@@ -604,7 +604,7 @@ int rt2x00queue_update_beacon(struct rt2x00_dev *rt2x00dev,
 	/*
 	 * Send beacon to hardware and enable beacon genaration..
 	 */
-	rt2x00dev->ops->lib->write_beacon(intf->beacon);
+	rt2x00dev->ops->lib->write_beacon(intf->beacon, &txdesc);
 
 	mutex_unlock(&intf->beacon_skb_mutex);
 
diff --git a/drivers/net/wireless/rt2x00/rt61pci.c b/drivers/net/wireless/rt2x00/rt61pci.c
index 9e3a1ee426e..24363634e6f 100644
--- a/drivers/net/wireless/rt2x00/rt61pci.c
+++ b/drivers/net/wireless/rt2x00/rt61pci.c
@@ -1842,7 +1842,8 @@ static void rt61pci_write_tx_desc(struct rt2x00_dev *rt2x00dev,
 /*
  * TX data initialization
  */
-static void rt61pci_write_beacon(struct queue_entry *entry)
+static void rt61pci_write_beacon(struct queue_entry *entry,
+				 struct txentry_desc *txdesc)
 {
 	struct rt2x00_dev *rt2x00dev = entry->queue->rt2x00dev;
 	struct skb_frame_desc *skbdesc = get_skb_frame_desc(entry->skb);
diff --git a/drivers/net/wireless/rt2x00/rt73usb.c b/drivers/net/wireless/rt2x00/rt73usb.c
index ca3707af4b4..81f6db1b16f 100644
--- a/drivers/net/wireless/rt2x00/rt73usb.c
+++ b/drivers/net/wireless/rt2x00/rt73usb.c
@@ -1504,7 +1504,8 @@ static void rt73usb_write_tx_desc(struct rt2x00_dev *rt2x00dev,
 /*
  * TX data initialization
  */
-static void rt73usb_write_beacon(struct queue_entry *entry)
+static void rt73usb_write_beacon(struct queue_entry *entry,
+				 struct txentry_desc *txdesc)
 {
 	struct rt2x00_dev *rt2x00dev = entry->queue->rt2x00dev;
 	struct skb_frame_desc *skbdesc = get_skb_frame_desc(entry->skb);
-- 
cgit v1.2.3-70-g09d2


From 3b9f0ed78cf2eb678edd60d74a4a36f5947d003d Mon Sep 17 00:00:00 2001
From: Gertjan van Wingerde <gwingerde@gmail.com>
Date: Sat, 8 May 2010 23:40:26 +0200
Subject: rt2x00: Fix beaconing on rt2800.

According to the Ralink vendor driver for rt2800 we don't need a full
TXD for a beacon but just a TXWI in front of the actual beacon.
Fix the rt2800pci and rt2800usb beaconing code accordingly.

Signed-off-by: Gertjan van Wingerde <gwingerde@gmail.com>
Acked-by: Ivo van Doorn <IvDoorn@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/rt2x00/rt2800pci.c | 17 +++++++++--------
 drivers/net/wireless/rt2x00/rt2800usb.c | 14 ++++++--------
 2 files changed, 15 insertions(+), 16 deletions(-)

(limited to 'drivers/net/wireless')

diff --git a/drivers/net/wireless/rt2x00/rt2800pci.c b/drivers/net/wireless/rt2x00/rt2800pci.c
index 80c67681cf9..7d4778d66e7 100644
--- a/drivers/net/wireless/rt2x00/rt2800pci.c
+++ b/drivers/net/wireless/rt2x00/rt2800pci.c
@@ -682,7 +682,6 @@ static void rt2800pci_write_beacon(struct queue_entry *entry,
 				   struct txentry_desc *txdesc)
 {
 	struct rt2x00_dev *rt2x00dev = entry->queue->rt2x00dev;
-	struct skb_frame_desc *skbdesc = get_skb_frame_desc(entry->skb);
 	unsigned int beacon_base;
 	u32 reg;
 
@@ -695,15 +694,17 @@ static void rt2800pci_write_beacon(struct queue_entry *entry,
 	rt2800_register_write(rt2x00dev, BCN_TIME_CFG, reg);
 
 	/*
-	 * Write entire beacon with descriptor to register.
+	 * Add the TXWI for the beacon to the skb.
+	 */
+	rt2800_write_txwi(entry->skb, txdesc);
+	skb_push(entry->skb, TXWI_DESC_SIZE);
+
+	/*
+	 * Write entire beacon with TXWI to register.
 	 */
 	beacon_base = HW_BEACON_OFFSET(entry->entry_idx);
-	rt2800_register_multiwrite(rt2x00dev,
-				      beacon_base,
-				      skbdesc->desc, skbdesc->desc_len);
-	rt2800_register_multiwrite(rt2x00dev,
-				      beacon_base + skbdesc->desc_len,
-				      entry->skb->data, entry->skb->len);
+	rt2800_register_multiwrite(rt2x00dev, beacon_base,
+				   entry->skb->data, entry->skb->len);
 
 	/*
 	 * Enable beaconing again.
diff --git a/drivers/net/wireless/rt2x00/rt2800usb.c b/drivers/net/wireless/rt2x00/rt2800usb.c
index d992a9352ed..00e7906dc20 100644
--- a/drivers/net/wireless/rt2x00/rt2800usb.c
+++ b/drivers/net/wireless/rt2x00/rt2800usb.c
@@ -431,17 +431,9 @@ static void rt2800usb_write_beacon(struct queue_entry *entry,
 				   struct txentry_desc *txdesc)
 {
 	struct rt2x00_dev *rt2x00dev = entry->queue->rt2x00dev;
-	struct skb_frame_desc *skbdesc = get_skb_frame_desc(entry->skb);
 	unsigned int beacon_base;
 	u32 reg;
 
-	/*
-	 * Add the descriptor in front of the skb.
-	 */
-	skb_push(entry->skb, entry->queue->desc_size);
-	memcpy(entry->skb->data, skbdesc->desc, skbdesc->desc_len);
-	skbdesc->desc = entry->skb->data;
-
 	/*
 	 * Disable beaconing while we are reloading the beacon data,
 	 * otherwise we might be sending out invalid data.
@@ -450,6 +442,12 @@ static void rt2800usb_write_beacon(struct queue_entry *entry,
 	rt2x00_set_field32(&reg, BCN_TIME_CFG_BEACON_GEN, 0);
 	rt2800_register_write(rt2x00dev, BCN_TIME_CFG, reg);
 
+	/*
+	 * Add the TXWI for the beacon to the skb.
+	 */
+	rt2800_write_txwi(entry->skb, txdesc);
+	skb_push(entry->skb, TXWI_DESC_SIZE);
+
 	/*
 	 * Write entire beacon with descriptor to register.
 	 */
-- 
cgit v1.2.3-70-g09d2


From 6295d81552f4b58256a9f7d85ce630b862598753 Mon Sep 17 00:00:00 2001
From: Gertjan van Wingerde <gwingerde@gmail.com>
Date: Sun, 9 May 2010 21:24:22 +0200
Subject: rt2x00: Clean up generic procedures on descriptor writing.

With a little bit of restructuring it isn't necessary to have special
cases in rt2x00queue_write_tx_descriptor for writing the descriptor
for beacons.
Simply split off the kicking of the TX queue to a separate function
with is only called for non-beacons.

Signed-off-by: Gertjan van Wingerde <gwingerde@gmail.com>
Acked-by: Ivo van Doorn <IvDoorn@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/rt2x00/rt2x00queue.c | 16 ++++++++++------
 1 file changed, 10 insertions(+), 6 deletions(-)

(limited to 'drivers/net/wireless')

diff --git a/drivers/net/wireless/rt2x00/rt2x00queue.c b/drivers/net/wireless/rt2x00/rt2x00queue.c
index 12ec68577f9..97b2c765065 100644
--- a/drivers/net/wireless/rt2x00/rt2x00queue.c
+++ b/drivers/net/wireless/rt2x00/rt2x00queue.c
@@ -428,20 +428,23 @@ static void rt2x00queue_write_tx_descriptor(struct queue_entry *entry,
 	 * it is now ready to be dumped to userspace through debugfs.
 	 */
 	rt2x00debug_dump_frame(rt2x00dev, DUMP_FRAME_TX, entry->skb);
+}
+
+static void rt2x00queue_kick_tx_queue(struct queue_entry *entry,
+				      struct txentry_desc *txdesc)
+{
+	struct data_queue *queue = entry->queue;
+	struct rt2x00_dev *rt2x00dev = queue->rt2x00dev;
 
 	/*
 	 * Check if we need to kick the queue, there are however a few rules
-	 *	1) Don't kick beacon queue
-	 *	2) Don't kick unless this is the last in frame in a burst.
+	 *	1) Don't kick unless this is the last in frame in a burst.
 	 *	   When the burst flag is set, this frame is always followed
 	 *	   by another frame which in some way are related to eachother.
 	 *	   This is true for fragments, RTS or CTS-to-self frames.
-	 *	3) Rule 2 can be broken when the available entries
+	 *	2) Rule 1 can be broken when the available entries
 	 *	   in the queue are less then a certain threshold.
 	 */
-	if (entry->queue->qid == QID_BEACON)
-		return;
-
 	if (rt2x00queue_threshold(queue) ||
 	    !test_bit(ENTRY_TXD_BURST, &txdesc->flags))
 		rt2x00dev->ops->lib->kick_tx_queue(rt2x00dev, queue->qid);
@@ -537,6 +540,7 @@ int rt2x00queue_write_tx_frame(struct data_queue *queue, struct sk_buff *skb,
 
 	rt2x00queue_index_inc(queue, Q_INDEX);
 	rt2x00queue_write_tx_descriptor(entry, &txdesc);
+	rt2x00queue_kick_tx_queue(entry, &txdesc);
 
 	return 0;
 }
-- 
cgit v1.2.3-70-g09d2


From a6bc03a07f8676d336e697914e9fe6cd54474ad1 Mon Sep 17 00:00:00 2001
From: Xose Vazquez Perez <xose.vazquez@gmail.com>
Date: Mon, 10 May 2010 11:35:36 +0200
Subject: wireless: rt2x00: rt2800usb: replace X by x

s/X/x

Signed-off-by: Xose Vazquez Perez <xose.vazquez@gmail.com>
Acked-by: Ivo van Doorn <IvDoorn@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/rt2x00/rt2800usb.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'drivers/net/wireless')

diff --git a/drivers/net/wireless/rt2x00/rt2800usb.c b/drivers/net/wireless/rt2x00/rt2800usb.c
index 00e7906dc20..d48d705d180 100644
--- a/drivers/net/wireless/rt2x00/rt2800usb.c
+++ b/drivers/net/wireless/rt2x00/rt2800usb.c
@@ -753,7 +753,7 @@ static struct usb_device_id rt2800usb_device_table[] = {
 	{ USB_DEVICE(0x7392, 0x7717), USB_DEVICE_DATA(&rt2800usb_ops) },
 	{ USB_DEVICE(0x7392, 0x7718), USB_DEVICE_DATA(&rt2800usb_ops) },
 	/* EnGenius */
-	{ USB_DEVICE(0X1740, 0x9701), USB_DEVICE_DATA(&rt2800usb_ops) },
+	{ USB_DEVICE(0x1740, 0x9701), USB_DEVICE_DATA(&rt2800usb_ops) },
 	{ USB_DEVICE(0x1740, 0x9702), USB_DEVICE_DATA(&rt2800usb_ops) },
 	/* Gigabyte */
 	{ USB_DEVICE(0x1044, 0x800b), USB_DEVICE_DATA(&rt2800usb_ops) },
-- 
cgit v1.2.3-70-g09d2


From 9459d59fbf0bc82ff4c804679fa8bc22788eca63 Mon Sep 17 00:00:00 2001
From: Randy Dunlap <randy.dunlap@oracle.com>
Date: Mon, 10 May 2010 09:24:29 -0700
Subject: wireless: depends on NET

When CONFIG_NET is disabled, the attempt to build wext-priv.c
fails with:

net/wireless/wext-priv.c: In function 'ioctl_private_call':
net/wireless/wext-priv.c:207: error: implicit declaration of function 'call_commit_handler'

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/Kconfig | 1 +
 1 file changed, 1 insertion(+)

(limited to 'drivers/net/wireless')

diff --git a/drivers/net/wireless/Kconfig b/drivers/net/wireless/Kconfig
index 2fbe9b4506c..174e3442d51 100644
--- a/drivers/net/wireless/Kconfig
+++ b/drivers/net/wireless/Kconfig
@@ -5,6 +5,7 @@
 menuconfig WLAN
 	bool "Wireless LAN"
 	depends on !S390
+	depends on NET
 	select WIRELESS
 	default y
 	---help---
-- 
cgit v1.2.3-70-g09d2