From f860d526eb2939a1c37128900b5af2b6f3ff7f20 Mon Sep 17 00:00:00 2001 From: Felix Fietkau Date: Wed, 30 Jun 2010 02:07:48 +0200 Subject: ath9k: fix TSF after reset on AR913x MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit When issuing a reset, the TSF value is lost in the hardware because of the 913x specific cold reset. As with some AR9280 cards, the TSF needs to be preserved in software here. Additionally, there's an issue that frequently prevents a successful TSF write directly after the chip reset. In this case, repeating the TSF write after the initval-writes usually works. This patch detects failed TSF writes and recovers from them, taking into account the delay caused by the initval writes. Signed-off-by: Felix Fietkau Reported-by: Björn Smedman Cc: stable@kernel.org Signed-off-by: John W. Linville --- drivers/net/wireless/ath/ath9k/hw.c | 16 ++++++++++++++-- 1 file changed, 14 insertions(+), 2 deletions(-) (limited to 'drivers/net/wireless') diff --git a/drivers/net/wireless/ath/ath9k/hw.c b/drivers/net/wireless/ath/ath9k/hw.c index 6e87af42b30..6bf7e7ac987 100644 --- a/drivers/net/wireless/ath/ath9k/hw.c +++ b/drivers/net/wireless/ath/ath9k/hw.c @@ -1268,7 +1268,8 @@ int ath9k_hw_reset(struct ath_hw *ah, struct ath9k_channel *chan, macStaId1 = REG_READ(ah, AR_STA_ID1) & AR_STA_ID1_BASE_RATE_11B; /* For chips on which RTC reset is done, save TSF before it gets cleared */ - if (AR_SREV_9280(ah) && ah->eep_ops->get_eeprom(ah, EEP_OL_PWRCTRL)) + if (AR_SREV_9100(ah) || + (AR_SREV_9280(ah) && ah->eep_ops->get_eeprom(ah, EEP_OL_PWRCTRL))) tsf = ath9k_hw_gettsf64(ah); saveLedState = REG_READ(ah, AR_CFG_LED) & @@ -1300,7 +1301,7 @@ int ath9k_hw_reset(struct ath_hw *ah, struct ath9k_channel *chan, } /* Restore TSF */ - if (tsf && AR_SREV_9280(ah) && ah->eep_ops->get_eeprom(ah, EEP_OL_PWRCTRL)) + if (tsf) ath9k_hw_settsf64(ah, tsf); if (AR_SREV_9280_10_OR_LATER(ah)) @@ -1313,6 +1314,17 @@ int ath9k_hw_reset(struct ath_hw *ah, struct ath9k_channel *chan, if (r) return r; + /* + * Some AR91xx SoC devices frequently fail to accept TSF writes + * right after the chip reset. When that happens, write a new + * value after the initvals have been applied, with an offset + * based on measured time difference + */ + if (AR_SREV_9100(ah) && (ath9k_hw_gettsf64(ah) < tsf)) { + tsf += 1500; + ath9k_hw_settsf64(ah, tsf); + } + /* Setup MFP options for CCMP */ if (AR_SREV_9280_20_OR_LATER(ah)) { /* Mask Retry(b11), PwrMgt(b12), MoreData(b13) to 0 in mgmt -- cgit v1.2.3-70-g09d2