From b6c3f5be7c6ac3375f44de4545c1ffe216b34022 Mon Sep 17 00:00:00 2001 From: Larry Finger Date: Tue, 2 Feb 2010 10:08:19 -0600 Subject: b43: Fix throughput regression Commit c7ab5ef9bcd281135c21b4732c9be779585181be entitled "b43: implement short slot and basic rate handling" reduced the transmit throughput for my BCM4311 device from 18 Mb/s to 0.7 Mb/s. The basic rate handling portion is OK, the problem is in the short slot handling. Prior to this change, the short slot enable/disable routines were never called. Experimentation showed that the critical part was changing the value at offset 0x0010 in the shared memory. This is supposed to contain the 802.11 Slot Time in usec, but if it is changed from its initial value of zero, performance is destroyed. On the other hand, changing the value in the MMIO register corresponding to the Interframe Slot Time increased performance from 18 to 22 Mb/s. A BCM4306/3 also shows dramatic improvement of the transmit rate from 5.3 to 19.0 Mb/s. Other changes in the patch include removal of the magic number for the MMIO register, and allowing the slot time to be set for any PHY operating in the 2.4 GHz band. Previously, the routine was executed only for G PHYs. Signed-off-by: Larry Finger Cc: Stable [Any stable version back through 2.6.28] Signed-off-by: John W. Linville --- drivers/net/wireless/b43/b43.h | 1 + drivers/net/wireless/b43/main.c | 13 ++++++++++--- 2 files changed, 11 insertions(+), 3 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/wireless/b43/b43.h b/drivers/net/wireless/b43/b43.h index fe3bf949199..c484cc25389 100644 --- a/drivers/net/wireless/b43/b43.h +++ b/drivers/net/wireless/b43/b43.h @@ -115,6 +115,7 @@ #define B43_MMIO_TSF_2 0x636 /* core rev < 3 only */ #define B43_MMIO_TSF_3 0x638 /* core rev < 3 only */ #define B43_MMIO_RNG 0x65A +#define B43_MMIO_IFSSLOT 0x684 /* Interframe slot time */ #define B43_MMIO_IFSCTL 0x688 /* Interframe space control */ #define B43_MMIO_IFSCTL_USE_EDCF 0x0004 #define B43_MMIO_POWERUP_DELAY 0x6A8 diff --git a/drivers/net/wireless/b43/main.c b/drivers/net/wireless/b43/main.c index 19b4eae47b5..fcbf0e27d9f 100644 --- a/drivers/net/wireless/b43/main.c +++ b/drivers/net/wireless/b43/main.c @@ -628,10 +628,17 @@ static void b43_upload_card_macaddress(struct b43_wldev *dev) static void b43_set_slot_time(struct b43_wldev *dev, u16 slot_time) { /* slot_time is in usec. */ - if (dev->phy.type != B43_PHYTYPE_G) + /* This test used to exit for all but a G PHY. */ + if (b43_current_band(dev->wl) == IEEE80211_BAND_5GHZ) return; - b43_write16(dev, 0x684, 510 + slot_time); - b43_shm_write16(dev, B43_SHM_SHARED, 0x0010, slot_time); + b43_write16(dev, B43_MMIO_IFSSLOT, 510 + slot_time); + /* Shared memory location 0x0010 is the slot time and should be + * set to slot_time; however, this register is initially 0 and changing + * the value adversely affects the transmit rate for BCM4311 + * devices. Until this behavior is unterstood, delete this step + * + * b43_shm_write16(dev, B43_SHM_SHARED, 0x0010, slot_time); + */ } static void b43_short_slot_timing_enable(struct b43_wldev *dev) -- cgit v1.2.3-70-g09d2 From 098dfded5b1b09927995e89c6d689f85a0f53384 Mon Sep 17 00:00:00 2001 From: Wey-Yi Guy Date: Fri, 5 Feb 2010 11:40:00 -0800 Subject: iwlwifi: Fix to set correct ht configuration iwl_set_rxon_ht() only get called in iwl_post_associate(); which cause possible incorrect ht configuration. Adding the call in iwl_mac_config() if IEEE80211_CONF_CHANGE_CHANNEL flag is set to re-configure and send rxon command. Fixes http://bugzilla.intellinuxwireless.org/show_bug.cgi?id=2146 Signed-off-by: Wey-Yi Guy Signed-off-by: Reinette Chatre CC: stable@kernel.org Signed-off-by: John W. Linville --- drivers/net/wireless/iwlwifi/iwl-core.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers/net') diff --git a/drivers/net/wireless/iwlwifi/iwl-core.c b/drivers/net/wireless/iwlwifi/iwl-core.c index 5461f105bd2..d10bea64fce 100644 --- a/drivers/net/wireless/iwlwifi/iwl-core.c +++ b/drivers/net/wireless/iwlwifi/iwl-core.c @@ -2744,6 +2744,7 @@ int iwl_mac_config(struct ieee80211_hw *hw, u32 changed) if ((le16_to_cpu(priv->staging_rxon.channel) != ch)) priv->staging_rxon.flags = 0; + iwl_set_rxon_ht(priv, ht_conf); iwl_set_rxon_channel(priv, conf->channel); iwl_set_flags_for_band(priv, conf->channel->band); -- cgit v1.2.3-70-g09d2 From 6c8afef551fef87a3bf24f8a74c69a7f2f72fc82 Mon Sep 17 00:00:00 2001 From: Sujith Date: Tue, 9 Feb 2010 10:07:00 +0530 Subject: ath9k: Fix sequence numbers for PAE frames Currently, PAE frames are not assigned proper sequence numbers. Since sending PAE frames as part of aggregates breaks crupto with several APs, they are sent as normal MPDUs. Fix the seqeuence number issue by updating the frame with the internal sequence number. Tested-by: Felix Fietkau Signed-off-by: Sujith Cc: stable@kernel.org Signed-off-by: John W. Linville --- drivers/net/wireless/ath/ath9k/xmit.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/wireless/ath/ath9k/xmit.c b/drivers/net/wireless/ath/ath9k/xmit.c index fa12b9060b0..29bf33692f7 100644 --- a/drivers/net/wireless/ath/ath9k/xmit.c +++ b/drivers/net/wireless/ath/ath9k/xmit.c @@ -1615,7 +1615,7 @@ static int ath_tx_setup_buffer(struct ieee80211_hw *hw, struct ath_buf *bf, bf->bf_frmlen -= padsize; } - if (conf_is_ht(&hw->conf) && !is_pae(skb)) + if (conf_is_ht(&hw->conf)) bf->bf_state.bf_type |= BUF_HT; bf->bf_flags = setup_tx_flags(sc, skb, txctl->txq); @@ -1701,7 +1701,7 @@ static void ath_tx_start_dma(struct ath_softc *sc, struct ath_buf *bf, goto tx_done; } - if (tx_info->flags & IEEE80211_TX_CTL_AMPDU) { + if ((tx_info->flags & IEEE80211_TX_CTL_AMPDU) && !is_pae(skb)) { /* * Try aggregation if it's a unicast data frame * and the destination is HT capable. -- cgit v1.2.3-70-g09d2 From 33a5d083e786f0c3fb4efedb59b0e8e3de39963b Mon Sep 17 00:00:00 2001 From: Roel Kluin Date: Tue, 9 Feb 2010 12:07:41 +0100 Subject: iwmc3200wifi: Test of wrong pointer after kzalloc in iwm_mlme_update_bss_table() The wrong pointer was tested. Signed-off-by: Roel Kluin Acked-by: Samuel Ortiz Signed-off-by: John W. Linville --- drivers/net/wireless/iwmc3200wifi/rx.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/net') diff --git a/drivers/net/wireless/iwmc3200wifi/rx.c b/drivers/net/wireless/iwmc3200wifi/rx.c index 3db3d8b0749..64d16fe37f9 100644 --- a/drivers/net/wireless/iwmc3200wifi/rx.c +++ b/drivers/net/wireless/iwmc3200wifi/rx.c @@ -794,7 +794,7 @@ static int iwm_mlme_update_bss_table(struct iwm_priv *iwm, u8 *buf, } bss->bss = kzalloc(bss_len, GFP_KERNEL); - if (!bss) { + if (!bss->bss) { kfree(bss); IWM_ERR(iwm, "Couldn't allocate bss\n"); return -ENOMEM; -- cgit v1.2.3-70-g09d2 From 174b24963eaf96dc5e093502ee09639aed13eb2f Mon Sep 17 00:00:00 2001 From: Jelle Martijn Kok Date: Wed, 10 Feb 2010 09:34:09 -0600 Subject: rtl8187: Add new device ID Add new RTL8187B device. Signed-off-by: Larry Finger Cc: Stable Signed-off-by: John W. Linville --- drivers/net/wireless/rtl818x/rtl8187_dev.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers/net') diff --git a/drivers/net/wireless/rtl818x/rtl8187_dev.c b/drivers/net/wireless/rtl818x/rtl8187_dev.c index bc5726dd5fe..7ba3052b070 100644 --- a/drivers/net/wireless/rtl818x/rtl8187_dev.c +++ b/drivers/net/wireless/rtl818x/rtl8187_dev.c @@ -65,6 +65,7 @@ static struct usb_device_id rtl8187_table[] __devinitdata = { /* Sitecom */ {USB_DEVICE(0x0df6, 0x000d), .driver_info = DEVICE_RTL8187}, {USB_DEVICE(0x0df6, 0x0028), .driver_info = DEVICE_RTL8187B}, + {USB_DEVICE(0x0df6, 0x0029), .driver_info = DEVICE_RTL8187B}, /* Sphairon Access Systems GmbH */ {USB_DEVICE(0x114B, 0x0150), .driver_info = DEVICE_RTL8187}, /* Dick Smith Electronics */ -- cgit v1.2.3-70-g09d2