From a487a8f7b6947f6445e5a1aa876522916785d5ec Mon Sep 17 00:00:00 2001 From: Auke Kok Date: Fri, 9 Jun 2006 11:29:03 -0700 Subject: e1000: prevent statistics from garbling during bus resets If a PCI bus error/fault triggers a PCI bus reset, attempts to get the ethernet packet count statistics from the hardware will fail, returning garbage data upstream. This patch skips statistics data collection if the PCI device is not on the bus. Signed-off-by: Linas Vepstas Cc: Jesse Brandeburg Signed-off-by: Andrew Morton Acked-by: Auke Kok --- drivers/net/e1000/e1000_main.c | 8 +++++++- 1 file changed, 7 insertions(+), 1 deletion(-) (limited to 'drivers/net') diff --git a/drivers/net/e1000/e1000_main.c b/drivers/net/e1000/e1000_main.c index 56c7492e3e9..a373ccb308d 100644 --- a/drivers/net/e1000/e1000_main.c +++ b/drivers/net/e1000/e1000_main.c @@ -3045,14 +3045,20 @@ void e1000_update_stats(struct e1000_adapter *adapter) { struct e1000_hw *hw = &adapter->hw; + struct pci_dev *pdev = adapter->pdev; unsigned long flags; uint16_t phy_tmp; #define PHY_IDLE_ERROR_COUNT_MASK 0x00FF - /* Prevent stats update while adapter is being reset */ + /* + * Prevent stats update while adapter is being reset, or if the pci + * connection is down. + */ if (adapter->link_speed == 0) return; + if (pdev->error_state && pdev->error_state != pci_channel_io_normal) + return; spin_lock_irqsave(&adapter->stats_lock, flags); -- cgit v1.2.3-70-g09d2 From acfbc9fde2ec7f304398f6ad7644002e07bf84bc Mon Sep 17 00:00:00 2001 From: Auke Kok Date: Tue, 27 Jun 2006 09:06:24 -0700 Subject: e1000: fix loopback ethtool test Ethtool was reporting that loopback failed randomly on esb2 systems. Upon study it was found that the phy manual was changed with respect to the loopback mode bits. The new value fixes it. Signed-off-by: Jesse Brandeburg Signed-off-by: Auke Kok --- drivers/net/e1000/e1000_ethtool.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/net') diff --git a/drivers/net/e1000/e1000_ethtool.c b/drivers/net/e1000/e1000_ethtool.c index 6ed7f599eba..845d293b2f6 100644 --- a/drivers/net/e1000/e1000_ethtool.c +++ b/drivers/net/e1000/e1000_ethtool.c @@ -1246,7 +1246,7 @@ e1000_integrated_phy_loopback(struct e1000_adapter *adapter) } else if (adapter->hw.phy_type == e1000_phy_gg82563) { e1000_write_phy_reg(&adapter->hw, GG82563_PHY_KMRN_MODE_CTRL, - 0x1CE); + 0x1CC); } /* force 1000, set loopback */ e1000_write_phy_reg(&adapter->hw, PHY_CTRL, 0x4140); -- cgit v1.2.3-70-g09d2 From 2db10a081c5c1082d58809a1bcf1a6073f4db160 Mon Sep 17 00:00:00 2001 From: Auke Kok Date: Tue, 27 Jun 2006 09:06:28 -0700 Subject: e1000: rework driver hardware reset locking After studying the driver mac reset code it was found that there were multiple race conditions possible to reset the unit twice or bring it e1000_up() double. This fixes all occurences where the driver needs to reset the mac. We also remove irq requesting/releasing into _open and _close so that while the device is _up we will never touch the irq's. This fixes the double free irq bug that people saw. To make sure that the watchdog task doesn't cause another race we let it run as a non-scheduled task. Signed-off-by: Jesse Brandeburg Signed-off-by: Auke Kok --- drivers/net/e1000/e1000.h | 8 ++- drivers/net/e1000/e1000_ethtool.c | 46 ++++++++------ drivers/net/e1000/e1000_main.c | 126 ++++++++++++++++++++++---------------- 3 files changed, 105 insertions(+), 75 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/e1000/e1000.h b/drivers/net/e1000/e1000.h index 2bc34fbfa69..2b96ad0482e 100644 --- a/drivers/net/e1000/e1000.h +++ b/drivers/net/e1000/e1000.h @@ -69,7 +69,6 @@ #ifdef NETIF_F_TSO #include #endif -#include #include #include #include @@ -255,7 +254,6 @@ struct e1000_adapter { spinlock_t tx_queue_lock; #endif atomic_t irq_sem; - struct work_struct watchdog_task; struct work_struct reset_task; uint8_t fc_autoneg; @@ -340,8 +338,13 @@ struct e1000_adapter { #ifdef NETIF_F_TSO boolean_t tso_force; #endif + unsigned long flags; }; +enum e1000_state_t { + __E1000_DRIVER_TESTING, + __E1000_RESETTING, +}; /* e1000_main.c */ extern char e1000_driver_name[]; @@ -349,6 +352,7 @@ extern char e1000_driver_version[]; int e1000_up(struct e1000_adapter *adapter); void e1000_down(struct e1000_adapter *adapter); void e1000_reset(struct e1000_adapter *adapter); +void e1000_reinit_locked(struct e1000_adapter *adapter); int e1000_setup_all_tx_resources(struct e1000_adapter *adapter); void e1000_free_all_tx_resources(struct e1000_adapter *adapter); int e1000_setup_all_rx_resources(struct e1000_adapter *adapter); diff --git a/drivers/net/e1000/e1000_ethtool.c b/drivers/net/e1000/e1000_ethtool.c index 845d293b2f6..cf5c5f46341 100644 --- a/drivers/net/e1000/e1000_ethtool.c +++ b/drivers/net/e1000/e1000_ethtool.c @@ -203,11 +203,9 @@ e1000_set_settings(struct net_device *netdev, struct ethtool_cmd *ecmd) /* reset the link */ - if (netif_running(adapter->netdev)) { - e1000_down(adapter); - e1000_reset(adapter); - e1000_up(adapter); - } else + if (netif_running(adapter->netdev)) + e1000_reinit_locked(adapter); + else e1000_reset(adapter); return 0; @@ -254,10 +252,9 @@ e1000_set_pauseparam(struct net_device *netdev, hw->original_fc = hw->fc; if (adapter->fc_autoneg == AUTONEG_ENABLE) { - if (netif_running(adapter->netdev)) { - e1000_down(adapter); - e1000_up(adapter); - } else + if (netif_running(adapter->netdev)) + e1000_reinit_locked(adapter); + else e1000_reset(adapter); } else return ((hw->media_type == e1000_media_type_fiber) ? @@ -279,10 +276,9 @@ e1000_set_rx_csum(struct net_device *netdev, uint32_t data) struct e1000_adapter *adapter = netdev_priv(netdev); adapter->rx_csum = data; - if (netif_running(netdev)) { - e1000_down(adapter); - e1000_up(adapter); - } else + if (netif_running(netdev)) + e1000_reinit_locked(adapter); + else e1000_reset(adapter); return 0; } @@ -631,6 +627,9 @@ e1000_set_ringparam(struct net_device *netdev, tx_ring_size = sizeof(struct e1000_tx_ring) * adapter->num_tx_queues; rx_ring_size = sizeof(struct e1000_rx_ring) * adapter->num_rx_queues; + while (test_and_set_bit(__E1000_RESETTING, &adapter->flags)) + msleep(1); + if (netif_running(adapter->netdev)) e1000_down(adapter); @@ -691,9 +690,11 @@ e1000_set_ringparam(struct net_device *netdev, adapter->rx_ring = rx_new; adapter->tx_ring = tx_new; if ((err = e1000_up(adapter))) - return err; + goto err_setup; } + clear_bit(__E1000_RESETTING, &adapter->flags); + return 0; err_setup_tx: e1000_free_all_rx_resources(adapter); @@ -701,6 +702,8 @@ err_setup_rx: adapter->rx_ring = rx_old; adapter->tx_ring = tx_old; e1000_up(adapter); +err_setup: + clear_bit(__E1000_RESETTING, &adapter->flags); return err; } @@ -1568,6 +1571,7 @@ e1000_diag_test(struct net_device *netdev, struct e1000_adapter *adapter = netdev_priv(netdev); boolean_t if_running = netif_running(netdev); + set_bit(__E1000_DRIVER_TESTING, &adapter->flags); if (eth_test->flags == ETH_TEST_FL_OFFLINE) { /* Offline tests */ @@ -1582,7 +1586,8 @@ e1000_diag_test(struct net_device *netdev, eth_test->flags |= ETH_TEST_FL_FAILED; if (if_running) - e1000_down(adapter); + /* indicate we're in test mode */ + dev_close(netdev); else e1000_reset(adapter); @@ -1607,8 +1612,9 @@ e1000_diag_test(struct net_device *netdev, adapter->hw.autoneg = autoneg; e1000_reset(adapter); + clear_bit(__E1000_DRIVER_TESTING, &adapter->flags); if (if_running) - e1000_up(adapter); + dev_open(netdev); } else { /* Online tests */ if (e1000_link_test(adapter, &data[4])) @@ -1619,6 +1625,8 @@ e1000_diag_test(struct net_device *netdev, data[1] = 0; data[2] = 0; data[3] = 0; + + clear_bit(__E1000_DRIVER_TESTING, &adapter->flags); } msleep_interruptible(4 * 1000); } @@ -1807,10 +1815,8 @@ static int e1000_nway_reset(struct net_device *netdev) { struct e1000_adapter *adapter = netdev_priv(netdev); - if (netif_running(netdev)) { - e1000_down(adapter); - e1000_up(adapter); - } + if (netif_running(netdev)) + e1000_reinit_locked(adapter); return 0; } diff --git a/drivers/net/e1000/e1000_main.c b/drivers/net/e1000/e1000_main.c index a373ccb308d..52d698bb259 100644 --- a/drivers/net/e1000/e1000_main.c +++ b/drivers/net/e1000/e1000_main.c @@ -133,7 +133,6 @@ static void e1000_clean_rx_ring(struct e1000_adapter *adapter, static void e1000_set_multi(struct net_device *netdev); static void e1000_update_phy_info(unsigned long data); static void e1000_watchdog(unsigned long data); -static void e1000_watchdog_task(struct e1000_adapter *adapter); static void e1000_82547_tx_fifo_stall(unsigned long data); static int e1000_xmit_frame(struct sk_buff *skb, struct net_device *netdev); static struct net_device_stats * e1000_get_stats(struct net_device *netdev); @@ -261,6 +260,44 @@ e1000_exit_module(void) module_exit(e1000_exit_module); +static int e1000_request_irq(struct e1000_adapter *adapter) +{ + struct net_device *netdev = adapter->netdev; + int flags, err = 0; + + flags = SA_SHIRQ | SA_SAMPLE_RANDOM; +#ifdef CONFIG_PCI_MSI + if (adapter->hw.mac_type > e1000_82547_rev_2) { + adapter->have_msi = TRUE; + if ((err = pci_enable_msi(adapter->pdev))) { + DPRINTK(PROBE, ERR, + "Unable to allocate MSI interrupt Error: %d\n", err); + adapter->have_msi = FALSE; + } + } + if (adapter->have_msi) + flags &= ~SA_SHIRQ; +#endif + if ((err = request_irq(adapter->pdev->irq, &e1000_intr, flags, + netdev->name, netdev))) + DPRINTK(PROBE, ERR, + "Unable to allocate interrupt Error: %d\n", err); + + return err; +} + +static void e1000_free_irq(struct e1000_adapter *adapter) +{ + struct net_device *netdev = adapter->netdev; + + free_irq(adapter->pdev->irq, netdev); + +#ifdef CONFIG_PCI_MSI + if (adapter->have_msi) + pci_disable_msi(adapter->pdev); +#endif +} + /** * e1000_irq_disable - Mask off interrupt generation on the NIC * @adapter: board private structure @@ -387,7 +424,7 @@ int e1000_up(struct e1000_adapter *adapter) { struct net_device *netdev = adapter->netdev; - int i, err; + int i; /* hardware has been reset, we need to reload some things */ @@ -415,24 +452,6 @@ e1000_up(struct e1000_adapter *adapter) E1000_DESC_UNUSED(ring)); } -#ifdef CONFIG_PCI_MSI - if (adapter->hw.mac_type > e1000_82547_rev_2) { - adapter->have_msi = TRUE; - if ((err = pci_enable_msi(adapter->pdev))) { - DPRINTK(PROBE, ERR, - "Unable to allocate MSI interrupt Error: %d\n", err); - adapter->have_msi = FALSE; - } - } -#endif - if ((err = request_irq(adapter->pdev->irq, &e1000_intr, - SA_SHIRQ | SA_SAMPLE_RANDOM, - netdev->name, netdev))) { - DPRINTK(PROBE, ERR, - "Unable to allocate interrupt Error: %d\n", err); - return err; - } - adapter->tx_queue_len = netdev->tx_queue_len; mod_timer(&adapter->watchdog_timer, jiffies); @@ -450,16 +469,10 @@ e1000_down(struct e1000_adapter *adapter) { struct net_device *netdev = adapter->netdev; boolean_t mng_mode_enabled = (adapter->hw.mac_type >= e1000_82571) && - e1000_check_mng_mode(&adapter->hw); + e1000_check_mng_mode(&adapter->hw); e1000_irq_disable(adapter); - free_irq(adapter->pdev->irq, netdev); -#ifdef CONFIG_PCI_MSI - if (adapter->hw.mac_type > e1000_82547_rev_2 && - adapter->have_msi == TRUE) - pci_disable_msi(adapter->pdev); -#endif del_timer_sync(&adapter->tx_fifo_stall_timer); del_timer_sync(&adapter->watchdog_timer); del_timer_sync(&adapter->phy_info_timer); @@ -495,6 +508,17 @@ e1000_down(struct e1000_adapter *adapter) } } +void +e1000_reinit_locked(struct e1000_adapter *adapter) +{ + WARN_ON(in_interrupt()); + while (test_and_set_bit(__E1000_RESETTING, &adapter->flags)) + msleep(1); + e1000_down(adapter); + e1000_up(adapter); + clear_bit(__E1000_RESETTING, &adapter->flags); +} + void e1000_reset(struct e1000_adapter *adapter) { @@ -758,9 +782,6 @@ e1000_probe(struct pci_dev *pdev, adapter->watchdog_timer.function = &e1000_watchdog; adapter->watchdog_timer.data = (unsigned long) adapter; - INIT_WORK(&adapter->watchdog_task, - (void (*)(void *))e1000_watchdog_task, adapter); - init_timer(&adapter->phy_info_timer); adapter->phy_info_timer.function = &e1000_update_phy_info; adapter->phy_info_timer.data = (unsigned long) adapter; @@ -1078,6 +1099,10 @@ e1000_open(struct net_device *netdev) struct e1000_adapter *adapter = netdev_priv(netdev); int err; + /* disallow open during test */ + if (test_bit(__E1000_DRIVER_TESTING, &adapter->flags)) + return -EBUSY; + /* allocate transmit descriptors */ if ((err = e1000_setup_all_tx_resources(adapter))) @@ -1088,6 +1113,10 @@ e1000_open(struct net_device *netdev) if ((err = e1000_setup_all_rx_resources(adapter))) goto err_setup_rx; + err = e1000_request_irq(adapter); + if (err) + goto err_up; + if ((err = e1000_up(adapter))) goto err_up; adapter->mng_vlan_id = E1000_MNG_VLAN_NONE; @@ -1131,7 +1160,9 @@ e1000_close(struct net_device *netdev) { struct e1000_adapter *adapter = netdev_priv(netdev); + WARN_ON(test_bit(__E1000_RESETTING, &adapter->flags)); e1000_down(adapter); + e1000_free_irq(adapter); e1000_free_all_tx_resources(adapter); e1000_free_all_rx_resources(adapter); @@ -2201,14 +2232,6 @@ static void e1000_watchdog(unsigned long data) { struct e1000_adapter *adapter = (struct e1000_adapter *) data; - - /* Do the rest outside of interrupt context */ - schedule_work(&adapter->watchdog_task); -} - -static void -e1000_watchdog_task(struct e1000_adapter *adapter) -{ struct net_device *netdev = adapter->netdev; struct e1000_tx_ring *txdr = adapter->tx_ring; uint32_t link, tctl; @@ -2919,8 +2942,7 @@ e1000_reset_task(struct net_device *netdev) { struct e1000_adapter *adapter = netdev_priv(netdev); - e1000_down(adapter); - e1000_up(adapter); + e1000_reinit_locked(adapter); } /** @@ -3026,10 +3048,8 @@ e1000_change_mtu(struct net_device *netdev, int new_mtu) netdev->mtu = new_mtu; - if (netif_running(netdev)) { - e1000_down(adapter); - e1000_up(adapter); - } + if (netif_running(netdev)) + e1000_reinit_locked(adapter); adapter->hw.max_frame_size = max_frame; @@ -4180,10 +4200,9 @@ e1000_mii_ioctl(struct net_device *netdev, struct ifreq *ifr, int cmd) return retval; } } - if (netif_running(adapter->netdev)) { - e1000_down(adapter); - e1000_up(adapter); - } else + if (netif_running(adapter->netdev)) + e1000_reinit_locked(adapter); + else e1000_reset(adapter); break; case M88E1000_PHY_SPEC_CTRL: @@ -4200,10 +4219,9 @@ e1000_mii_ioctl(struct net_device *netdev, struct ifreq *ifr, int cmd) case PHY_CTRL: if (mii_reg & MII_CR_POWER_DOWN) break; - if (netif_running(adapter->netdev)) { - e1000_down(adapter); - e1000_up(adapter); - } else + if (netif_running(adapter->netdev)) + e1000_reinit_locked(adapter); + else e1000_reset(adapter); break; } @@ -4462,8 +4480,10 @@ e1000_suspend(struct pci_dev *pdev, pm_message_t state) netif_device_detach(netdev); - if (netif_running(netdev)) + if (netif_running(netdev)) { + WARN_ON(test_bit(__E1000_RESETTING, &adapter->flags)); e1000_down(adapter); + } #ifdef CONFIG_PM /* Implement our own version of pci_save_state(pdev) because pci- -- cgit v1.2.3-70-g09d2 From 79f05bf0ba9b41561600f3cdfdf86b5184fc6675 Mon Sep 17 00:00:00 2001 From: Auke Kok Date: Tue, 27 Jun 2006 09:06:32 -0700 Subject: e1000: Make PHY powerup/down a function In relation to the irq work done earlier we also move the PHY powerup and powerdown functions into separate functions and move the calls to _close and _open, making the PHY stay in it's power state as long as the device is _up. Signed-off-by: Jesse Brandeburg Signed-off-by: Auke Kok --- drivers/net/e1000/e1000_main.c | 76 +++++++++++++++++++++++++++--------------- 1 file changed, 49 insertions(+), 27 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/e1000/e1000_main.c b/drivers/net/e1000/e1000_main.c index 52d698bb259..813d5e0e458 100644 --- a/drivers/net/e1000/e1000_main.c +++ b/drivers/net/e1000/e1000_main.c @@ -428,14 +428,6 @@ e1000_up(struct e1000_adapter *adapter) /* hardware has been reset, we need to reload some things */ - /* Reset the PHY if it was previously powered down */ - if (adapter->hw.media_type == e1000_media_type_copper) { - uint16_t mii_reg; - e1000_read_phy_reg(&adapter->hw, PHY_CTRL, &mii_reg); - if (mii_reg & MII_CR_POWER_DOWN) - e1000_phy_hw_reset(&adapter->hw); - } - e1000_set_multi(netdev); e1000_restore_vlan(adapter); @@ -464,12 +456,56 @@ e1000_up(struct e1000_adapter *adapter) return 0; } +/** + * e1000_power_up_phy - restore link in case the phy was powered down + * @adapter: address of board private structure + * + * The phy may be powered down to save power and turn off link when the + * driver is unloaded and wake on lan is not enabled (among others) + * *** this routine MUST be followed by a call to e1000_reset *** + * + **/ + +static void e1000_power_up_phy(struct e1000_adapter *adapter) +{ + uint16_t mii_reg = 0; + + /* Just clear the power down bit to wake the phy back up */ + if (adapter->hw.media_type == e1000_media_type_copper) { + /* according to the manual, the phy will retain its + * settings across a power-down/up cycle */ + e1000_read_phy_reg(&adapter->hw, PHY_CTRL, &mii_reg); + mii_reg &= ~MII_CR_POWER_DOWN; + e1000_write_phy_reg(&adapter->hw, PHY_CTRL, mii_reg); + } +} + +static void e1000_power_down_phy(struct e1000_adapter *adapter) +{ + boolean_t mng_mode_enabled = (adapter->hw.mac_type >= e1000_82571) && + e1000_check_mng_mode(&adapter->hw); + /* Power down the PHY so no link is implied when interface is down + * The PHY cannot be powered down if any of the following is TRUE + * (a) WoL is enabled + * (b) AMT is active + * (c) SoL/IDER session is active */ + if (!adapter->wol && adapter->hw.mac_type >= e1000_82540 && + adapter->hw.media_type == e1000_media_type_copper && + !(E1000_READ_REG(&adapter->hw, MANC) & E1000_MANC_SMBUS_EN) && + !mng_mode_enabled && + !e1000_check_phy_reset_block(&adapter->hw)) { + uint16_t mii_reg = 0; + e1000_read_phy_reg(&adapter->hw, PHY_CTRL, &mii_reg); + mii_reg |= MII_CR_POWER_DOWN; + e1000_write_phy_reg(&adapter->hw, PHY_CTRL, mii_reg); + mdelay(1); + } +} + void e1000_down(struct e1000_adapter *adapter) { struct net_device *netdev = adapter->netdev; - boolean_t mng_mode_enabled = (adapter->hw.mac_type >= e1000_82571) && - e1000_check_mng_mode(&adapter->hw); e1000_irq_disable(adapter); @@ -489,23 +525,6 @@ e1000_down(struct e1000_adapter *adapter) e1000_reset(adapter); e1000_clean_all_tx_rings(adapter); e1000_clean_all_rx_rings(adapter); - - /* Power down the PHY so no link is implied when interface is down * - * The PHY cannot be powered down if any of the following is TRUE * - * (a) WoL is enabled - * (b) AMT is active - * (c) SoL/IDER session is active */ - if (!adapter->wol && adapter->hw.mac_type >= e1000_82540 && - adapter->hw.media_type == e1000_media_type_copper && - !(E1000_READ_REG(&adapter->hw, MANC) & E1000_MANC_SMBUS_EN) && - !mng_mode_enabled && - !e1000_check_phy_reset_block(&adapter->hw)) { - uint16_t mii_reg; - e1000_read_phy_reg(&adapter->hw, PHY_CTRL, &mii_reg); - mii_reg |= MII_CR_POWER_DOWN; - e1000_write_phy_reg(&adapter->hw, PHY_CTRL, mii_reg); - mdelay(1); - } } void @@ -1117,6 +1136,8 @@ e1000_open(struct net_device *netdev) if (err) goto err_up; + e1000_power_up_phy(adapter); + if ((err = e1000_up(adapter))) goto err_up; adapter->mng_vlan_id = E1000_MNG_VLAN_NONE; @@ -1162,6 +1183,7 @@ e1000_close(struct net_device *netdev) WARN_ON(test_bit(__E1000_RESETTING, &adapter->flags)); e1000_down(adapter); + e1000_power_down_phy(adapter); e1000_free_irq(adapter); e1000_free_all_tx_resources(adapter); -- cgit v1.2.3-70-g09d2 From 6fdfef162426766611b1f640138e4720f56e45f8 Mon Sep 17 00:00:00 2001 From: Auke Kok Date: Tue, 27 Jun 2006 09:06:36 -0700 Subject: e1000: fix CONFIG_PM blocks e1000_suspend is called even when !CONFIG_PM. The non-PM code inside of it is properly #ifdef'd. This fixes the compiler warnings when !CONFIG_PM. Signed-off-by: Jesse Brandeburg Signed-off-by: Auke Kok --- drivers/net/e1000/e1000_main.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/e1000/e1000_main.c b/drivers/net/e1000/e1000_main.c index 813d5e0e458..7cf5e5dce0d 100644 --- a/drivers/net/e1000/e1000_main.c +++ b/drivers/net/e1000/e1000_main.c @@ -177,8 +177,8 @@ static void e1000_vlan_rx_add_vid(struct net_device *netdev, uint16_t vid); static void e1000_vlan_rx_kill_vid(struct net_device *netdev, uint16_t vid); static void e1000_restore_vlan(struct e1000_adapter *adapter); -#ifdef CONFIG_PM static int e1000_suspend(struct pci_dev *pdev, pm_message_t state); +#ifdef CONFIG_PM static int e1000_resume(struct pci_dev *pdev); #endif static void e1000_shutdown(struct pci_dev *pdev); @@ -205,8 +205,8 @@ static struct pci_driver e1000_driver = { .probe = e1000_probe, .remove = __devexit_p(e1000_remove), /* Power Managment Hooks */ -#ifdef CONFIG_PM .suspend = e1000_suspend, +#ifdef CONFIG_PM .resume = e1000_resume, #endif .shutdown = e1000_shutdown, @@ -4498,7 +4498,9 @@ e1000_suspend(struct pci_dev *pdev, pm_message_t state) struct e1000_adapter *adapter = netdev_priv(netdev); uint32_t ctrl, ctrl_ext, rctl, manc, status; uint32_t wufc = adapter->wol; +#ifdef CONFIG_PM int retval = 0; +#endif netif_device_detach(netdev); -- cgit v1.2.3-70-g09d2 From 0cbabbb0725fa34a37d6b7870b2d2fe17d1a0a94 Mon Sep 17 00:00:00 2001 From: Auke Kok Date: Tue, 27 Jun 2006 09:06:41 -0700 Subject: e1000: small performance tweak by removing double code buffer_info is already filled at the end of this while() loop. Signed-off-by: Jesse Brandeburg Signed-off-by: Auke Kok --- drivers/net/e1000/e1000_main.c | 1 - 1 file changed, 1 deletion(-) (limited to 'drivers/net') diff --git a/drivers/net/e1000/e1000_main.c b/drivers/net/e1000/e1000_main.c index 7cf5e5dce0d..76e36a4fd98 100644 --- a/drivers/net/e1000/e1000_main.c +++ b/drivers/net/e1000/e1000_main.c @@ -3717,7 +3717,6 @@ e1000_clean_rx_irq_ps(struct e1000_adapter *adapter, buffer_info = &rx_ring->buffer_info[i]; while (staterr & E1000_RXD_STAT_DD) { - buffer_info = &rx_ring->buffer_info[i]; ps_page = &rx_ring->ps_page[i]; ps_page_dma = &rx_ring->ps_page_dma[i]; #ifdef CONFIG_E1000_NAPI -- cgit v1.2.3-70-g09d2 From 9a53a2029885e0088e9149679215b95d04deb57b Mon Sep 17 00:00:00 2001 From: Auke Kok Date: Tue, 27 Jun 2006 09:06:45 -0700 Subject: e1000: add smart power down code Smart Power Down is a power saving feature in newer e1000 hardware. We disable it because it causes time to link to be long, but make it a user choice. Signed-off-by: Jesse Brandeburg Signed-off-by: Auke Kok --- drivers/net/e1000/e1000.h | 1 + drivers/net/e1000/e1000_main.c | 15 +++++++++++++++ drivers/net/e1000/e1000_param.c | 25 +++++++++++++++++++++++++ 3 files changed, 41 insertions(+) (limited to 'drivers/net') diff --git a/drivers/net/e1000/e1000.h b/drivers/net/e1000/e1000.h index 2b96ad0482e..dbdaa332cac 100644 --- a/drivers/net/e1000/e1000.h +++ b/drivers/net/e1000/e1000.h @@ -338,6 +338,7 @@ struct e1000_adapter { #ifdef NETIF_F_TSO boolean_t tso_force; #endif + boolean_t smart_power_down; /* phy smart power down */ unsigned long flags; }; diff --git a/drivers/net/e1000/e1000_main.c b/drivers/net/e1000/e1000_main.c index 76e36a4fd98..ea18f3085f6 100644 --- a/drivers/net/e1000/e1000_main.c +++ b/drivers/net/e1000/e1000_main.c @@ -607,6 +607,21 @@ e1000_reset(struct e1000_adapter *adapter) e1000_reset_adaptive(&adapter->hw); e1000_phy_get_info(&adapter->hw, &adapter->phy_info); + + if (!adapter->smart_power_down && + (adapter->hw.mac_type == e1000_82571 || + adapter->hw.mac_type == e1000_82572)) { + uint16_t phy_data = 0; + /* speed up time to link by disabling smart power down, ignore + * the return value of this function because there is nothing + * different we would do if it failed */ + e1000_read_phy_reg(&adapter->hw, IGP02E1000_PHY_POWER_MGMT, + &phy_data); + phy_data &= ~IGP02E1000_PM_SPD; + e1000_write_phy_reg(&adapter->hw, IGP02E1000_PHY_POWER_MGMT, + phy_data); + } + if (adapter->en_mng_pt) { manc = E1000_READ_REG(&adapter->hw, MANC); manc |= (E1000_MANC_ARP_EN | E1000_MANC_EN_MNG2HOST); diff --git a/drivers/net/e1000/e1000_param.c b/drivers/net/e1000/e1000_param.c index e55f8969a0f..a8d9295b077 100644 --- a/drivers/net/e1000/e1000_param.c +++ b/drivers/net/e1000/e1000_param.c @@ -183,6 +183,15 @@ E1000_PARAM(RxAbsIntDelay, "Receive Absolute Interrupt Delay"); E1000_PARAM(InterruptThrottleRate, "Interrupt Throttling Rate"); +/* Enable Smart Power Down of the PHY + * + * Valid Range: 0, 1 + * + * Default Value: 0 (disabled) + */ + +E1000_PARAM(SmartPowerDownEnable, "Enable PHY smart power down"); + #define AUTONEG_ADV_DEFAULT 0x2F #define AUTONEG_ADV_MASK 0x2F #define FLOW_CONTROL_DEFAULT FLOW_CONTROL_FULL @@ -494,6 +503,22 @@ e1000_check_options(struct e1000_adapter *adapter) adapter->itr = opt.def; } } + { /* Smart Power Down */ + struct e1000_option opt = { + .type = enable_option, + .name = "PHY Smart Power Down", + .err = "defaulting to Disabled", + .def = OPTION_DISABLED + }; + + if (num_SmartPowerDownEnable > bd) { + int spd = SmartPowerDownEnable[bd]; + e1000_validate_option(&spd, &opt, adapter); + adapter->smart_power_down = spd; + } else { + adapter->smart_power_down = opt.def; + } + } switch (adapter->hw.media_type) { case e1000_media_type_fiber: -- cgit v1.2.3-70-g09d2 From a5eafce2ce2fd3a1956657d85908ca691b870e5d Mon Sep 17 00:00:00 2001 From: Auke Kok Date: Tue, 27 Jun 2006 09:06:49 -0700 Subject: e1000: change printk into DPRINTK Changing a printk message to make clear that this message is originating from e1000. Signed-off-by: Jesse Brandeburg Signed-off-by: Auke Kok --- drivers/net/e1000/e1000_main.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/net') diff --git a/drivers/net/e1000/e1000_main.c b/drivers/net/e1000/e1000_main.c index ea18f3085f6..fc39cbcee2b 100644 --- a/drivers/net/e1000/e1000_main.c +++ b/drivers/net/e1000/e1000_main.c @@ -2841,7 +2841,7 @@ e1000_xmit_frame(struct sk_buff *skb, struct net_device *netdev) case e1000_82573: pull_size = min((unsigned int)4, skb->data_len); if (!__pskb_pull_tail(skb, pull_size)) { - printk(KERN_ERR + DPRINTK(DRV, ERR, "__pskb_pull_tail failed.\n"); dev_kfree_skb_any(skb); return NETDEV_TX_OK; -- cgit v1.2.3-70-g09d2 From 864c4e45ec6d1bfe16a14d887d5baad201419aba Mon Sep 17 00:00:00 2001 From: Auke Kok Date: Tue, 27 Jun 2006 09:06:53 -0700 Subject: e1000: recycle skb Recycle an skb to improve performance a bit. Signed-off-by: Jesse Brandeburg Signed-off-by: Auke Kok --- drivers/net/e1000/e1000_main.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'drivers/net') diff --git a/drivers/net/e1000/e1000_main.c b/drivers/net/e1000/e1000_main.c index fc39cbcee2b..c58fafd1c4b 100644 --- a/drivers/net/e1000/e1000_main.c +++ b/drivers/net/e1000/e1000_main.c @@ -3604,7 +3604,8 @@ e1000_clean_rx_irq(struct e1000_adapter *adapter, /* All receives must fit into a single buffer */ E1000_DBG("%s: Receive packet consumed multiple" " buffers\n", netdev->name); - dev_kfree_skb_irq(skb); + /* recycle */ + buffer_info-> skb = skb; goto next_desc; } -- cgit v1.2.3-70-g09d2 From 17231712ab89fa085bc235ef19c1e6e0c163e4fc Mon Sep 17 00:00:00 2001 From: Auke Kok Date: Tue, 27 Jun 2006 09:06:59 -0700 Subject: e1000: rework module param code with uninitialized values We can take uninitialized values into account which minimizes code and allows us to simplify the parameter checking code greatly. Signed-off-by: Jesse Brandeburg Signed-off-by: Auke Kok --- drivers/net/e1000/e1000_param.c | 167 +++++++++++++++------------------------- 1 file changed, 61 insertions(+), 106 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/e1000/e1000_param.c b/drivers/net/e1000/e1000_param.c index a8d9295b077..bd6c040b3cf 100644 --- a/drivers/net/e1000/e1000_param.c +++ b/drivers/net/e1000/e1000_param.c @@ -45,6 +45,16 @@ */ #define E1000_PARAM_INIT { [0 ... E1000_MAX_NIC] = OPTION_UNSET } +/* Module Parameters are always initialized to -1, so that the driver + * can tell the difference between no user specified value or the + * user asking for the default value. + * The true default values are loaded in when e1000_check_options is called. + * + * This is a GCC extension to ANSI C. + * See the item "Labeled Elements in Initializers" in the section + * "Extensions to the C Language Family" of the GCC documentation. + */ + #define E1000_PARAM(X, desc) \ static int __devinitdata X[E1000_MAX_NIC+1] = E1000_PARAM_INIT; \ static int num_##X = 0; \ @@ -305,6 +315,7 @@ e1000_check_options(struct e1000_adapter *adapter) DPRINTK(PROBE, NOTICE, "Warning: no configuration for board #%i\n", bd); DPRINTK(PROBE, NOTICE, "Using defaults for all values\n"); + bd = E1000_MAX_NIC; } { /* Transmit Descriptor Count */ @@ -322,14 +333,9 @@ e1000_check_options(struct e1000_adapter *adapter) opt.arg.r.max = mac_type < e1000_82544 ? E1000_MAX_TXD : E1000_MAX_82544_TXD; - if (num_TxDescriptors > bd) { - tx_ring->count = TxDescriptors[bd]; - e1000_validate_option(&tx_ring->count, &opt, adapter); - E1000_ROUNDUP(tx_ring->count, - REQ_TX_DESCRIPTOR_MULTIPLE); - } else { - tx_ring->count = opt.def; - } + tx_ring->count = TxDescriptors[bd]; + e1000_validate_option(&tx_ring->count, &opt, adapter); + E1000_ROUNDUP(tx_ring->count, REQ_TX_DESCRIPTOR_MULTIPLE); for (i = 0; i < adapter->num_tx_queues; i++) tx_ring[i].count = tx_ring->count; } @@ -348,14 +354,9 @@ e1000_check_options(struct e1000_adapter *adapter) opt.arg.r.max = mac_type < e1000_82544 ? E1000_MAX_RXD : E1000_MAX_82544_RXD; - if (num_RxDescriptors > bd) { - rx_ring->count = RxDescriptors[bd]; - e1000_validate_option(&rx_ring->count, &opt, adapter); - E1000_ROUNDUP(rx_ring->count, - REQ_RX_DESCRIPTOR_MULTIPLE); - } else { - rx_ring->count = opt.def; - } + rx_ring->count = RxDescriptors[bd]; + e1000_validate_option(&rx_ring->count, &opt, adapter); + E1000_ROUNDUP(rx_ring->count, REQ_RX_DESCRIPTOR_MULTIPLE); for (i = 0; i < adapter->num_rx_queues; i++) rx_ring[i].count = rx_ring->count; } @@ -367,13 +368,9 @@ e1000_check_options(struct e1000_adapter *adapter) .def = OPTION_ENABLED }; - if (num_XsumRX > bd) { - int rx_csum = XsumRX[bd]; - e1000_validate_option(&rx_csum, &opt, adapter); - adapter->rx_csum = rx_csum; - } else { - adapter->rx_csum = opt.def; - } + int rx_csum = XsumRX[bd]; + e1000_validate_option(&rx_csum, &opt, adapter); + adapter->rx_csum = rx_csum; } { /* Flow Control */ @@ -393,13 +390,9 @@ e1000_check_options(struct e1000_adapter *adapter) .p = fc_list }} }; - if (num_FlowControl > bd) { - int fc = FlowControl[bd]; - e1000_validate_option(&fc, &opt, adapter); - adapter->hw.fc = adapter->hw.original_fc = fc; - } else { - adapter->hw.fc = adapter->hw.original_fc = opt.def; - } + int fc = FlowControl[bd]; + e1000_validate_option(&fc, &opt, adapter); + adapter->hw.fc = adapter->hw.original_fc = fc; } { /* Transmit Interrupt Delay */ struct e1000_option opt = { @@ -411,13 +404,8 @@ e1000_check_options(struct e1000_adapter *adapter) .max = MAX_TXDELAY }} }; - if (num_TxIntDelay > bd) { - adapter->tx_int_delay = TxIntDelay[bd]; - e1000_validate_option(&adapter->tx_int_delay, &opt, - adapter); - } else { - adapter->tx_int_delay = opt.def; - } + adapter->tx_int_delay = TxIntDelay[bd]; + e1000_validate_option(&adapter->tx_int_delay, &opt, adapter); } { /* Transmit Absolute Interrupt Delay */ struct e1000_option opt = { @@ -429,13 +417,9 @@ e1000_check_options(struct e1000_adapter *adapter) .max = MAX_TXABSDELAY }} }; - if (num_TxAbsIntDelay > bd) { - adapter->tx_abs_int_delay = TxAbsIntDelay[bd]; - e1000_validate_option(&adapter->tx_abs_int_delay, &opt, - adapter); - } else { - adapter->tx_abs_int_delay = opt.def; - } + adapter->tx_abs_int_delay = TxAbsIntDelay[bd]; + e1000_validate_option(&adapter->tx_abs_int_delay, &opt, + adapter); } { /* Receive Interrupt Delay */ struct e1000_option opt = { @@ -447,13 +431,8 @@ e1000_check_options(struct e1000_adapter *adapter) .max = MAX_RXDELAY }} }; - if (num_RxIntDelay > bd) { - adapter->rx_int_delay = RxIntDelay[bd]; - e1000_validate_option(&adapter->rx_int_delay, &opt, - adapter); - } else { - adapter->rx_int_delay = opt.def; - } + adapter->rx_int_delay = RxIntDelay[bd]; + e1000_validate_option(&adapter->rx_int_delay, &opt, adapter); } { /* Receive Absolute Interrupt Delay */ struct e1000_option opt = { @@ -465,13 +444,9 @@ e1000_check_options(struct e1000_adapter *adapter) .max = MAX_RXABSDELAY }} }; - if (num_RxAbsIntDelay > bd) { - adapter->rx_abs_int_delay = RxAbsIntDelay[bd]; - e1000_validate_option(&adapter->rx_abs_int_delay, &opt, - adapter); - } else { - adapter->rx_abs_int_delay = opt.def; - } + adapter->rx_abs_int_delay = RxAbsIntDelay[bd]; + e1000_validate_option(&adapter->rx_abs_int_delay, &opt, + adapter); } { /* Interrupt Throttling Rate */ struct e1000_option opt = { @@ -483,24 +458,18 @@ e1000_check_options(struct e1000_adapter *adapter) .max = MAX_ITR }} }; - if (num_InterruptThrottleRate > bd) { - adapter->itr = InterruptThrottleRate[bd]; - switch (adapter->itr) { - case 0: - DPRINTK(PROBE, INFO, "%s turned off\n", - opt.name); - break; - case 1: - DPRINTK(PROBE, INFO, "%s set to dynamic mode\n", - opt.name); - break; - default: - e1000_validate_option(&adapter->itr, &opt, - adapter); - break; - } - } else { - adapter->itr = opt.def; + adapter->itr = InterruptThrottleRate[bd]; + switch (adapter->itr) { + case 0: + DPRINTK(PROBE, INFO, "%s turned off\n", opt.name); + break; + case 1: + DPRINTK(PROBE, INFO, "%s set to dynamic mode\n", + opt.name); + break; + default: + e1000_validate_option(&adapter->itr, &opt, adapter); + break; } } { /* Smart Power Down */ @@ -511,13 +480,9 @@ e1000_check_options(struct e1000_adapter *adapter) .def = OPTION_DISABLED }; - if (num_SmartPowerDownEnable > bd) { - int spd = SmartPowerDownEnable[bd]; - e1000_validate_option(&spd, &opt, adapter); - adapter->smart_power_down = spd; - } else { - adapter->smart_power_down = opt.def; - } + int spd = SmartPowerDownEnable[bd]; + e1000_validate_option(&spd, &opt, adapter); + adapter->smart_power_down = spd; } switch (adapter->hw.media_type) { @@ -544,17 +509,18 @@ static void __devinit e1000_check_fiber_options(struct e1000_adapter *adapter) { int bd = adapter->bd_number; - if (num_Speed > bd) { + bd = bd > E1000_MAX_NIC ? E1000_MAX_NIC : bd; + if ((Speed[bd] != OPTION_UNSET)) { DPRINTK(PROBE, INFO, "Speed not valid for fiber adapters, " "parameter ignored\n"); } - if (num_Duplex > bd) { + if ((Duplex[bd] != OPTION_UNSET)) { DPRINTK(PROBE, INFO, "Duplex not valid for fiber adapters, " "parameter ignored\n"); } - if ((num_AutoNeg > bd) && (AutoNeg[bd] != 0x20)) { + if ((AutoNeg[bd] != OPTION_UNSET) && (AutoNeg[bd] != 0x20)) { DPRINTK(PROBE, INFO, "AutoNeg other than 1000/Full is " "not valid for fiber adapters, " "parameter ignored\n"); @@ -573,6 +539,7 @@ e1000_check_copper_options(struct e1000_adapter *adapter) { int speed, dplx, an; int bd = adapter->bd_number; + bd = bd > E1000_MAX_NIC ? E1000_MAX_NIC : bd; { /* Speed */ struct e1000_opt_list speed_list[] = {{ 0, "" }, @@ -589,12 +556,8 @@ e1000_check_copper_options(struct e1000_adapter *adapter) .p = speed_list }} }; - if (num_Speed > bd) { - speed = Speed[bd]; - e1000_validate_option(&speed, &opt, adapter); - } else { - speed = opt.def; - } + speed = Speed[bd]; + e1000_validate_option(&speed, &opt, adapter); } { /* Duplex */ struct e1000_opt_list dplx_list[] = {{ 0, "" }, @@ -616,15 +579,11 @@ e1000_check_copper_options(struct e1000_adapter *adapter) "Speed/Duplex/AutoNeg parameter ignored.\n"); return; } - if (num_Duplex > bd) { - dplx = Duplex[bd]; - e1000_validate_option(&dplx, &opt, adapter); - } else { - dplx = opt.def; - } + dplx = Duplex[bd]; + e1000_validate_option(&dplx, &opt, adapter); } - if ((num_AutoNeg > bd) && (speed != 0 || dplx != 0)) { + if (AutoNeg[bd] != OPTION_UNSET && (speed != 0 || dplx != 0)) { DPRINTK(PROBE, INFO, "AutoNeg specified along with Speed or Duplex, " "parameter ignored\n"); @@ -673,19 +632,15 @@ e1000_check_copper_options(struct e1000_adapter *adapter) .p = an_list }} }; - if (num_AutoNeg > bd) { - an = AutoNeg[bd]; - e1000_validate_option(&an, &opt, adapter); - } else { - an = opt.def; - } + an = AutoNeg[bd]; + e1000_validate_option(&an, &opt, adapter); adapter->hw.autoneg_advertised = an; } switch (speed + dplx) { case 0: adapter->hw.autoneg = adapter->fc_autoneg = 1; - if ((num_Speed > bd) && (speed != 0 || dplx != 0)) + if (Speed[bd] != OPTION_UNSET || Duplex[bd] != OPTION_UNSET) DPRINTK(PROBE, INFO, "Speed and duplex autonegotiation enabled\n"); break; -- cgit v1.2.3-70-g09d2 From 4ca213a6957318219822c024c8e4c61b3e42a7dc Mon Sep 17 00:00:00 2001 From: Auke Kok Date: Tue, 27 Jun 2006 09:07:08 -0700 Subject: e1000: force register write flushes to circumvent broken platforms A certain AMD64 bridge (8132) has an option to turn on write combining which breaks our adapter. To circumvent this we need to flush every write. Signed-off-by: Jesse Brandeburg Signed-off-by: Auke Kok --- drivers/net/e1000/e1000_hw.c | 24 ++++++++++++++++++++++-- drivers/net/e1000/e1000_main.c | 18 +++++++++++------- 2 files changed, 33 insertions(+), 9 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/e1000/e1000_hw.c b/drivers/net/e1000/e1000_hw.c index 3959039b16e..749d621a07d 100644 --- a/drivers/net/e1000/e1000_hw.c +++ b/drivers/net/e1000/e1000_hw.c @@ -705,8 +705,12 @@ e1000_init_hw(struct e1000_hw *hw) /* Zero out the Multicast HASH table */ DEBUGOUT("Zeroing the MTA\n"); mta_size = E1000_MC_TBL_SIZE; - for(i = 0; i < mta_size; i++) + for(i = 0; i < mta_size; i++) { E1000_WRITE_REG_ARRAY(hw, MTA, i, 0); + /* use write flush to prevent Memory Write Block (MWB) from + * occuring when accessing our register space */ + E1000_WRITE_FLUSH(hw); + } /* Set the PCI priority bit correctly in the CTRL register. This * determines if the adapter gives priority to receives, or if it @@ -5106,7 +5110,9 @@ e1000_init_rx_addrs(struct e1000_hw *hw) DEBUGOUT("Clearing RAR[1-15]\n"); for(i = 1; i < rar_num; i++) { E1000_WRITE_REG_ARRAY(hw, RA, (i << 1), 0); + E1000_WRITE_FLUSH(hw); E1000_WRITE_REG_ARRAY(hw, RA, ((i << 1) + 1), 0); + E1000_WRITE_FLUSH(hw); } } @@ -5153,7 +5159,9 @@ e1000_mc_addr_list_update(struct e1000_hw *hw, for(i = rar_used_count; i < num_rar_entry; i++) { E1000_WRITE_REG_ARRAY(hw, RA, (i << 1), 0); + E1000_WRITE_FLUSH(hw); E1000_WRITE_REG_ARRAY(hw, RA, ((i << 1) + 1), 0); + E1000_WRITE_FLUSH(hw); } /* Clear the MTA */ @@ -5161,6 +5169,7 @@ e1000_mc_addr_list_update(struct e1000_hw *hw, num_mta_entry = E1000_NUM_MTA_REGISTERS; for(i = 0; i < num_mta_entry; i++) { E1000_WRITE_REG_ARRAY(hw, MTA, i, 0); + E1000_WRITE_FLUSH(hw); } /* Add the new addresses */ @@ -5275,9 +5284,12 @@ e1000_mta_set(struct e1000_hw *hw, if((hw->mac_type == e1000_82544) && ((hash_reg & 0x1) == 1)) { temp = E1000_READ_REG_ARRAY(hw, MTA, (hash_reg - 1)); E1000_WRITE_REG_ARRAY(hw, MTA, hash_reg, mta); + E1000_WRITE_FLUSH(hw); E1000_WRITE_REG_ARRAY(hw, MTA, (hash_reg - 1), temp); + E1000_WRITE_FLUSH(hw); } else { E1000_WRITE_REG_ARRAY(hw, MTA, hash_reg, mta); + E1000_WRITE_FLUSH(hw); } } @@ -5334,7 +5346,9 @@ e1000_rar_set(struct e1000_hw *hw, } E1000_WRITE_REG_ARRAY(hw, RA, (index << 1), rar_low); + E1000_WRITE_FLUSH(hw); E1000_WRITE_REG_ARRAY(hw, RA, ((index << 1) + 1), rar_high); + E1000_WRITE_FLUSH(hw); } /****************************************************************************** @@ -5354,9 +5368,12 @@ e1000_write_vfta(struct e1000_hw *hw, if((hw->mac_type == e1000_82544) && ((offset & 0x1) == 1)) { temp = E1000_READ_REG_ARRAY(hw, VFTA, (offset - 1)); E1000_WRITE_REG_ARRAY(hw, VFTA, offset, value); + E1000_WRITE_FLUSH(hw); E1000_WRITE_REG_ARRAY(hw, VFTA, (offset - 1), temp); + E1000_WRITE_FLUSH(hw); } else { E1000_WRITE_REG_ARRAY(hw, VFTA, offset, value); + E1000_WRITE_FLUSH(hw); } } @@ -5392,6 +5409,7 @@ e1000_clear_vfta(struct e1000_hw *hw) * manageability unit */ vfta_value = (offset == vfta_offset) ? vfta_bit_in_reg : 0; E1000_WRITE_REG_ARRAY(hw, VFTA, offset, vfta_value); + E1000_WRITE_FLUSH(hw); } } @@ -6928,8 +6946,10 @@ e1000_mng_write_cmd_header(struct e1000_hw * hw, length >>= 2; /* The device driver writes the relevant command block into the ram area. */ - for (i = 0; i < length; i++) + for (i = 0; i < length; i++) { E1000_WRITE_REG_ARRAY_DWORD(hw, HOST_IF, i, *((uint32_t *) hdr + i)); + E1000_WRITE_FLUSH(hw); + } return E1000_SUCCESS; } diff --git a/drivers/net/e1000/e1000_main.c b/drivers/net/e1000/e1000_main.c index c58fafd1c4b..c44ed6f4ba7 100644 --- a/drivers/net/e1000/e1000_main.c +++ b/drivers/net/e1000/e1000_main.c @@ -1370,11 +1370,11 @@ e1000_configure_tx(struct e1000_adapter *adapter) tdba = adapter->tx_ring[0].dma; tdlen = adapter->tx_ring[0].count * sizeof(struct e1000_tx_desc); - E1000_WRITE_REG(hw, TDBAL, (tdba & 0x00000000ffffffffULL)); - E1000_WRITE_REG(hw, TDBAH, (tdba >> 32)); E1000_WRITE_REG(hw, TDLEN, tdlen); - E1000_WRITE_REG(hw, TDH, 0); + E1000_WRITE_REG(hw, TDBAH, (tdba >> 32)); + E1000_WRITE_REG(hw, TDBAL, (tdba & 0x00000000ffffffffULL)); E1000_WRITE_REG(hw, TDT, 0); + E1000_WRITE_REG(hw, TDH, 0); adapter->tx_ring[0].tdh = E1000_TDH; adapter->tx_ring[0].tdt = E1000_TDT; break; @@ -1780,11 +1780,11 @@ e1000_configure_rx(struct e1000_adapter *adapter) case 1: default: rdba = adapter->rx_ring[0].dma; - E1000_WRITE_REG(hw, RDBAL, (rdba & 0x00000000ffffffffULL)); - E1000_WRITE_REG(hw, RDBAH, (rdba >> 32)); E1000_WRITE_REG(hw, RDLEN, rdlen); - E1000_WRITE_REG(hw, RDH, 0); + E1000_WRITE_REG(hw, RDBAH, (rdba >> 32)); + E1000_WRITE_REG(hw, RDBAL, (rdba & 0x00000000ffffffffULL)); E1000_WRITE_REG(hw, RDT, 0); + E1000_WRITE_REG(hw, RDH, 0); adapter->rx_ring[0].rdh = E1000_RDH; adapter->rx_ring[0].rdt = E1000_RDT; break; @@ -2189,14 +2189,18 @@ e1000_set_multi(struct net_device *netdev) mc_ptr = mc_ptr->next; } else { E1000_WRITE_REG_ARRAY(hw, RA, i << 1, 0); + E1000_WRITE_FLUSH(hw); E1000_WRITE_REG_ARRAY(hw, RA, (i << 1) + 1, 0); + E1000_WRITE_FLUSH(hw); } } /* clear the old settings from the multicast hash table */ - for (i = 0; i < E1000_NUM_MTA_REGISTERS; i++) + for (i = 0; i < E1000_NUM_MTA_REGISTERS; i++) { E1000_WRITE_REG_ARRAY(hw, MTA, i, 0); + E1000_WRITE_FLUSH(hw); + } /* load any remaining addresses into the hash table */ -- cgit v1.2.3-70-g09d2 From 7dfee0cb1d506897805b663dd95e9651619a4d4d Mon Sep 17 00:00:00 2001 From: Auke Kok Date: Tue, 27 Jun 2006 09:07:50 -0700 Subject: e1000: disable CRC stripping workaround CRC stripping is breaking SMBUS-connected BMC's. We disable this feature to make it work. This fixes related bugs regarding SOL. Signed-off-by: Jesse Brandeburg Signed-off-by: Auke Kok --- drivers/net/e1000/e1000_main.c | 5 +---- 1 file changed, 1 insertion(+), 4 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/e1000/e1000_main.c b/drivers/net/e1000/e1000_main.c index c44ed6f4ba7..a9e55dc10c5 100644 --- a/drivers/net/e1000/e1000_main.c +++ b/drivers/net/e1000/e1000_main.c @@ -1628,9 +1628,6 @@ e1000_setup_rctl(struct e1000_adapter *adapter) E1000_RCTL_LBM_NO | E1000_RCTL_RDMTS_HALF | (adapter->hw.mc_filter_type << E1000_RCTL_MO_SHIFT); - if (adapter->hw.mac_type > e1000_82543) - rctl |= E1000_RCTL_SECRC; - if (adapter->hw.tbi_compatibility_on == 1) rctl |= E1000_RCTL_SBP; else @@ -1696,7 +1693,7 @@ e1000_setup_rctl(struct e1000_adapter *adapter) rfctl |= E1000_RFCTL_IPV6_DIS; E1000_WRITE_REG(&adapter->hw, RFCTL, rfctl); - rctl |= E1000_RCTL_DTYP_PS | E1000_RCTL_SECRC; + rctl |= E1000_RCTL_DTYP_PS; psrctl |= adapter->rx_ps_bsize0 >> E1000_PSRCTL_BSIZE0_SHIFT; -- cgit v1.2.3-70-g09d2 From f1b3a85354d3877fae45ef448e7e49c2efd692d5 Mon Sep 17 00:00:00 2001 From: Auke Kok Date: Tue, 27 Jun 2006 09:07:56 -0700 Subject: e1000: fix adapter led blinking inconsistency Several e1000 adapters were not blinking correctly or inconsistently. This patch cleans this up and makes them all behave the same as far as possible. Signed-off-by: Jeff Kirsher Signed-off-by: Auke Kok --- drivers/net/e1000/e1000_ethtool.c | 15 +-------------- drivers/net/e1000/e1000_hw.c | 38 ++++++++++++++++++++++++++++++++++++++ drivers/net/e1000/e1000_hw.h | 1 + 3 files changed, 40 insertions(+), 14 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/e1000/e1000_ethtool.c b/drivers/net/e1000/e1000_ethtool.c index cf5c5f46341..06091553292 100644 --- a/drivers/net/e1000/e1000_ethtool.c +++ b/drivers/net/e1000/e1000_ethtool.c @@ -1786,21 +1786,8 @@ e1000_phys_id(struct net_device *netdev, uint32_t data) mod_timer(&adapter->blink_timer, jiffies); msleep_interruptible(data * 1000); del_timer_sync(&adapter->blink_timer); - } else if (adapter->hw.mac_type < e1000_82573) { - E1000_WRITE_REG(&adapter->hw, LEDCTL, - (E1000_LEDCTL_LED2_BLINK_RATE | - E1000_LEDCTL_LED0_BLINK | E1000_LEDCTL_LED2_BLINK | - (E1000_LEDCTL_MODE_LED_ON << E1000_LEDCTL_LED2_MODE_SHIFT) | - (E1000_LEDCTL_MODE_LINK_ACTIVITY << E1000_LEDCTL_LED0_MODE_SHIFT) | - (E1000_LEDCTL_MODE_LED_OFF << E1000_LEDCTL_LED1_MODE_SHIFT))); - msleep_interruptible(data * 1000); } else { - E1000_WRITE_REG(&adapter->hw, LEDCTL, - (E1000_LEDCTL_LED2_BLINK_RATE | - E1000_LEDCTL_LED1_BLINK | E1000_LEDCTL_LED2_BLINK | - (E1000_LEDCTL_MODE_LED_ON << E1000_LEDCTL_LED2_MODE_SHIFT) | - (E1000_LEDCTL_MODE_LINK_ACTIVITY << E1000_LEDCTL_LED1_MODE_SHIFT) | - (E1000_LEDCTL_MODE_LED_OFF << E1000_LEDCTL_LED0_MODE_SHIFT))); + e1000_blink_led_start(&adapter->hw); msleep_interruptible(data * 1000); } diff --git a/drivers/net/e1000/e1000_hw.c b/drivers/net/e1000/e1000_hw.c index 749d621a07d..1c5b18478fb 100644 --- a/drivers/net/e1000/e1000_hw.c +++ b/drivers/net/e1000/e1000_hw.c @@ -5536,6 +5536,44 @@ e1000_setup_led(struct e1000_hw *hw) return E1000_SUCCESS; } +/****************************************************************************** + * Used on 82571 and later Si that has LED blink bits. + * Callers must use their own timer and should have already called + * e1000_id_led_init() + * Call e1000_cleanup led() to stop blinking + * + * hw - Struct containing variables accessed by shared code + *****************************************************************************/ +int32_t +e1000_blink_led_start(struct e1000_hw *hw) +{ + int16_t i; + uint32_t ledctl_blink = 0; + + DEBUGFUNC("e1000_id_led_blink_on"); + + if (hw->mac_type < e1000_82571) { + /* Nothing to do */ + return E1000_SUCCESS; + } + if (hw->media_type == e1000_media_type_fiber) { + /* always blink LED0 for PCI-E fiber */ + ledctl_blink = E1000_LEDCTL_LED0_BLINK | + (E1000_LEDCTL_MODE_LED_ON << E1000_LEDCTL_LED0_MODE_SHIFT); + } else { + /* set the blink bit for each LED that's "on" (0x0E) in ledctl_mode2 */ + ledctl_blink = hw->ledctl_mode2; + for (i=0; i < 4; i++) + if (((hw->ledctl_mode2 >> (i * 8)) & 0xFF) == + E1000_LEDCTL_MODE_LED_ON) + ledctl_blink |= (E1000_LEDCTL_LED0_BLINK << (i * 8)); + } + + E1000_WRITE_REG(hw, LEDCTL, ledctl_blink); + + return E1000_SUCCESS; +} + /****************************************************************************** * Restores the saved state of the SW controlable LED. * diff --git a/drivers/net/e1000/e1000_hw.h b/drivers/net/e1000/e1000_hw.h index 467c9ed944f..941b47d6167 100644 --- a/drivers/net/e1000/e1000_hw.h +++ b/drivers/net/e1000/e1000_hw.h @@ -401,6 +401,7 @@ int32_t e1000_setup_led(struct e1000_hw *hw); int32_t e1000_cleanup_led(struct e1000_hw *hw); int32_t e1000_led_on(struct e1000_hw *hw); int32_t e1000_led_off(struct e1000_hw *hw); +int32_t e1000_blink_led_start(struct e1000_hw *hw); /* Adaptive IFS Functions */ -- cgit v1.2.3-70-g09d2 From ee04022a21764a12e29eee144b72344ebfe0a55c Mon Sep 17 00:00:00 2001 From: Auke Kok Date: Tue, 27 Jun 2006 09:08:03 -0700 Subject: e1000: M88 PHY workaround M88 rev 2 PHY needs a longer downshift to function properly. This adds a much longer downshift counter for this specific device. Signed-off-by: Jesse Brandeburg Signed-off-by: Auke Kok --- drivers/net/e1000/e1000_hw.c | 46 ++++++++++++++++++++++++++++---------------- drivers/net/e1000/e1000_hw.h | 11 +++++++++++ 2 files changed, 40 insertions(+), 17 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/e1000/e1000_hw.c b/drivers/net/e1000/e1000_hw.c index 1c5b18478fb..37eb351b4c9 100644 --- a/drivers/net/e1000/e1000_hw.c +++ b/drivers/net/e1000/e1000_hw.c @@ -1565,28 +1565,40 @@ e1000_copper_link_mgp_setup(struct e1000_hw *hw) phy_data &= ~M88E1000_PSCR_POLARITY_REVERSAL; if(hw->disable_polarity_correction == 1) phy_data |= M88E1000_PSCR_POLARITY_REVERSAL; - ret_val = e1000_write_phy_reg(hw, M88E1000_PHY_SPEC_CTRL, phy_data); - if(ret_val) - return ret_val; - - /* Force TX_CLK in the Extended PHY Specific Control Register - * to 25MHz clock. - */ - ret_val = e1000_read_phy_reg(hw, M88E1000_EXT_PHY_SPEC_CTRL, &phy_data); - if(ret_val) + ret_val = e1000_write_phy_reg(hw, M88E1000_PHY_SPEC_CTRL, phy_data); + if (ret_val) return ret_val; - phy_data |= M88E1000_EPSCR_TX_CLK_25; - if (hw->phy_revision < M88E1011_I_REV_4) { - /* Configure Master and Slave downshift values */ - phy_data &= ~(M88E1000_EPSCR_MASTER_DOWNSHIFT_MASK | + /* Force TX_CLK in the Extended PHY Specific Control Register + * to 25MHz clock. + */ + ret_val = e1000_read_phy_reg(hw, M88E1000_EXT_PHY_SPEC_CTRL, &phy_data); + if (ret_val) + return ret_val; + + phy_data |= M88E1000_EPSCR_TX_CLK_25; + + if ((hw->phy_revision == E1000_REVISION_2) && + (hw->phy_id == M88E1111_I_PHY_ID)) { + /* Vidalia Phy, set the downshift counter to 5x */ + phy_data &= ~(M88EC018_EPSCR_DOWNSHIFT_COUNTER_MASK); + phy_data |= M88EC018_EPSCR_DOWNSHIFT_COUNTER_5X; + ret_val = e1000_write_phy_reg(hw, + M88E1000_EXT_PHY_SPEC_CTRL, phy_data); + if (ret_val) + return ret_val; + } else { + /* Configure Master and Slave downshift values */ + phy_data &= ~(M88E1000_EPSCR_MASTER_DOWNSHIFT_MASK | M88E1000_EPSCR_SLAVE_DOWNSHIFT_MASK); - phy_data |= (M88E1000_EPSCR_MASTER_DOWNSHIFT_1X | + phy_data |= (M88E1000_EPSCR_MASTER_DOWNSHIFT_1X | M88E1000_EPSCR_SLAVE_DOWNSHIFT_1X); - ret_val = e1000_write_phy_reg(hw, M88E1000_EXT_PHY_SPEC_CTRL, phy_data); - if(ret_val) - return ret_val; + ret_val = e1000_write_phy_reg(hw, + M88E1000_EXT_PHY_SPEC_CTRL, phy_data); + if (ret_val) + return ret_val; + } } /* SW Reset the PHY so all changes take effect */ diff --git a/drivers/net/e1000/e1000_hw.h b/drivers/net/e1000/e1000_hw.h index 941b47d6167..1908e0d3110 100644 --- a/drivers/net/e1000/e1000_hw.h +++ b/drivers/net/e1000/e1000_hw.h @@ -2765,6 +2765,17 @@ struct e1000_host_command_info { #define M88E1000_EPSCR_TX_CLK_25 0x0070 /* 25 MHz TX_CLK */ #define M88E1000_EPSCR_TX_CLK_0 0x0000 /* NO TX_CLK */ +/* M88EC018 Rev 2 specific DownShift settings */ +#define M88EC018_EPSCR_DOWNSHIFT_COUNTER_MASK 0x0E00 +#define M88EC018_EPSCR_DOWNSHIFT_COUNTER_1X 0x0000 +#define M88EC018_EPSCR_DOWNSHIFT_COUNTER_2X 0x0200 +#define M88EC018_EPSCR_DOWNSHIFT_COUNTER_3X 0x0400 +#define M88EC018_EPSCR_DOWNSHIFT_COUNTER_4X 0x0600 +#define M88EC018_EPSCR_DOWNSHIFT_COUNTER_5X 0x0800 +#define M88EC018_EPSCR_DOWNSHIFT_COUNTER_6X 0x0A00 +#define M88EC018_EPSCR_DOWNSHIFT_COUNTER_7X 0x0C00 +#define M88EC018_EPSCR_DOWNSHIFT_COUNTER_8X 0x0E00 + /* IGP01E1000 Specific Port Config Register - R/W */ #define IGP01E1000_PSCFR_AUTO_MDIX_PAR_DETECT 0x0010 #define IGP01E1000_PSCFR_PRE_EN 0x0020 -- cgit v1.2.3-70-g09d2 From 592600a0536f0d5aab4dc95f19515a37d03430f8 Mon Sep 17 00:00:00 2001 From: Auke Kok Date: Tue, 27 Jun 2006 09:08:09 -0700 Subject: e1000: check return value of _get_speed_and_duplex We were not checking the return value of get_speed_and_duplex properly, whih may contain an error value. Signed-off-by: Jesse Brandeburg Signed-off-by: Auke Kok --- drivers/net/e1000/e1000_hw.c | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/e1000/e1000_hw.c b/drivers/net/e1000/e1000_hw.c index 37eb351b4c9..784f9505864 100644 --- a/drivers/net/e1000/e1000_hw.c +++ b/drivers/net/e1000/e1000_hw.c @@ -2737,8 +2737,12 @@ e1000_check_for_link(struct e1000_hw *hw) */ if(hw->tbi_compatibility_en) { uint16_t speed, duplex; - e1000_get_speed_and_duplex(hw, &speed, &duplex); - if(speed != SPEED_1000) { + ret_val = e1000_get_speed_and_duplex(hw, &speed, &duplex); + if (ret_val) { + DEBUGOUT("Error getting link speed and duplex\n"); + return ret_val; + } + if (speed != SPEED_1000) { /* If link speed is not set to gigabit speed, we do not need * to enable TBI compatibility. */ -- cgit v1.2.3-70-g09d2 From ab7bc0ad72a12ef8eacc1560c9342aa567f3531d Mon Sep 17 00:00:00 2001 From: Auke Kok Date: Tue, 27 Jun 2006 09:08:13 -0700 Subject: e1000: disable ERT Hardware is reported to have problems with ERT. We disable it for all hardware to make sure we are not seeing unexplainable user problems. Signed-off-by: Jesse Brandeburg Signed-off-by: Auke Kok --- drivers/net/e1000/e1000_main.c | 3 --- 1 file changed, 3 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/e1000/e1000_main.c b/drivers/net/e1000/e1000_main.c index a9e55dc10c5..cc0c77c4c17 100644 --- a/drivers/net/e1000/e1000_main.c +++ b/drivers/net/e1000/e1000_main.c @@ -1806,9 +1806,6 @@ e1000_configure_rx(struct e1000_adapter *adapter) E1000_WRITE_REG(hw, RXCSUM, rxcsum); } - if (hw->mac_type == e1000_82573) - E1000_WRITE_REG(hw, ERT, 0x0100); - /* Enable Receives */ E1000_WRITE_REG(hw, RCTL, rctl); } -- cgit v1.2.3-70-g09d2 From d37ea5d56293b7a883d2a993df5d8b9fb660ed3b Mon Sep 17 00:00:00 2001 From: Auke Kok Date: Tue, 27 Jun 2006 09:08:17 -0700 Subject: e1000: add ich8lan core functions This implements the core new functions needed for ich8's internal NIC. This includes: * ich8 specific read/write code * flash/nvm access code * software semaphore flag functions * 10/100 PHY (fe - no gigabit speed) support for low-end versions * A workaround for a powerdown sequence problem discovered that affects a small number of motherboard. Signed-off-by: Jesse Brandeburg Signed-off-by: Auke Kok --- drivers/net/e1000/e1000_hw.c | 1000 ++++++++++++++++++++++++++++++++++++++- drivers/net/e1000/e1000_hw.h | 386 ++++++++++++++- drivers/net/e1000/e1000_osdep.h | 13 + 3 files changed, 1392 insertions(+), 7 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/e1000/e1000_hw.c b/drivers/net/e1000/e1000_hw.c index 784f9505864..a3f5ccdfafc 100644 --- a/drivers/net/e1000/e1000_hw.c +++ b/drivers/net/e1000/e1000_hw.c @@ -3616,12 +3616,121 @@ e1000_phy_reset(struct e1000_hw *hw) return E1000_SUCCESS; } +/****************************************************************************** +* Work-around for 82566 power-down: on D3 entry- +* 1) disable gigabit link +* 2) write VR power-down enable +* 3) read it back +* if successful continue, else issue LCD reset and repeat +* +* hw - struct containing variables accessed by shared code +******************************************************************************/ +void +e1000_phy_powerdown_workaround(struct e1000_hw *hw) +{ + int32_t reg; + uint16_t phy_data; + int32_t retry = 0; + + DEBUGFUNC("e1000_phy_powerdown_workaround"); + + if (hw->phy_type != e1000_phy_igp_3) + return; + + do { + /* Disable link */ + reg = E1000_READ_REG(hw, PHY_CTRL); + E1000_WRITE_REG(hw, PHY_CTRL, reg | E1000_PHY_CTRL_GBE_DISABLE | + E1000_PHY_CTRL_NOND0A_GBE_DISABLE); + + /* Write VR power-down enable */ + e1000_read_phy_reg(hw, IGP3_VR_CTRL, &phy_data); + e1000_write_phy_reg(hw, IGP3_VR_CTRL, phy_data | + IGP3_VR_CTRL_MODE_SHUT); + + /* Read it back and test */ + e1000_read_phy_reg(hw, IGP3_VR_CTRL, &phy_data); + if ((phy_data & IGP3_VR_CTRL_MODE_SHUT) || retry) + break; + + /* Issue PHY reset and repeat at most one more time */ + reg = E1000_READ_REG(hw, CTRL); + E1000_WRITE_REG(hw, CTRL, reg | E1000_CTRL_PHY_RST); + retry++; + } while (retry); + + return; + +} + +/****************************************************************************** +* Work-around for 82566 Kumeran PCS lock loss: +* On link status change (i.e. PCI reset, speed change) and link is up and +* speed is gigabit- +* 0) if workaround is optionally disabled do nothing +* 1) wait 1ms for Kumeran link to come up +* 2) check Kumeran Diagnostic register PCS lock loss bit +* 3) if not set the link is locked (all is good), otherwise... +* 4) reset the PHY +* 5) repeat up to 10 times +* Note: this is only called for IGP3 copper when speed is 1gb. +* +* hw - struct containing variables accessed by shared code +******************************************************************************/ +int32_t +e1000_kumeran_lock_loss_workaround(struct e1000_hw *hw) +{ + int32_t ret_val; + int32_t reg; + int32_t cnt; + uint16_t phy_data; + + if (hw->kmrn_lock_loss_workaround_disabled) + return E1000_SUCCESS; + + /* Make sure link is up before proceeding. If not just return. + * Attempting this while link is negotiating fouls up link + * stability */ + ret_val = e1000_read_phy_reg(hw, PHY_STATUS, &phy_data); + ret_val = e1000_read_phy_reg(hw, PHY_STATUS, &phy_data); + + if (phy_data & MII_SR_LINK_STATUS) { + for (cnt = 0; cnt < 10; cnt++) { + /* read once to clear */ + ret_val = e1000_read_phy_reg(hw, IGP3_KMRN_DIAG, &phy_data); + if (ret_val) + return ret_val; + /* and again to get new status */ + ret_val = e1000_read_phy_reg(hw, IGP3_KMRN_DIAG, &phy_data); + if (ret_val) + return ret_val; + + /* check for PCS lock */ + if (!(phy_data & IGP3_KMRN_DIAG_PCS_LOCK_LOSS)) + return E1000_SUCCESS; + + /* Issue PHY reset */ + e1000_phy_hw_reset(hw); + msec_delay_irq(5); + } + /* Disable GigE link negotiation */ + reg = E1000_READ_REG(hw, PHY_CTRL); + E1000_WRITE_REG(hw, PHY_CTRL, reg | E1000_PHY_CTRL_GBE_DISABLE | + E1000_PHY_CTRL_NOND0A_GBE_DISABLE); + + /* unable to acquire PCS lock */ + return E1000_ERR_PHY; + } + + return E1000_SUCCESS; +} + /****************************************************************************** * Probes the expected PHY address for known PHY IDs * * hw - Struct containing variables accessed by shared code ******************************************************************************/ -static int32_t +int32_t e1000_detect_gig_phy(struct e1000_hw *hw) { int32_t phy_init_status, ret_val; @@ -3803,6 +3912,53 @@ e1000_phy_igp_get_info(struct e1000_hw *hw, return E1000_SUCCESS; } +/****************************************************************************** +* Get PHY information from various PHY registers for ife PHY only. +* +* hw - Struct containing variables accessed by shared code +* phy_info - PHY information structure +******************************************************************************/ +int32_t +e1000_phy_ife_get_info(struct e1000_hw *hw, + struct e1000_phy_info *phy_info) +{ + int32_t ret_val; + uint16_t phy_data, polarity; + + DEBUGFUNC("e1000_phy_ife_get_info"); + + phy_info->downshift = (e1000_downshift)hw->speed_downgraded; + phy_info->extended_10bt_distance = e1000_10bt_ext_dist_enable_normal; + + ret_val = e1000_read_phy_reg(hw, IFE_PHY_SPECIAL_CONTROL, &phy_data); + if (ret_val) + return ret_val; + phy_info->polarity_correction = + (phy_data & IFE_PSC_AUTO_POLARITY_DISABLE) >> + IFE_PSC_AUTO_POLARITY_DISABLE_SHIFT; + + if (phy_info->polarity_correction == e1000_polarity_reversal_enabled) { + ret_val = e1000_check_polarity(hw, &polarity); + if (ret_val) + return ret_val; + } else { + /* Polarity is forced. */ + polarity = (phy_data & IFE_PSC_FORCE_POLARITY) >> + IFE_PSC_FORCE_POLARITY_SHIFT; + } + phy_info->cable_polarity = polarity; + + ret_val = e1000_read_phy_reg(hw, IFE_PHY_MDIX_CONTROL, &phy_data); + if (ret_val) + return ret_val; + + phy_info->mdix_mode = + (phy_data & (IFE_PMC_AUTO_MDIX | IFE_PMC_FORCE_MDIX)) >> + IFE_PMC_MDIX_MODE_SHIFT; + + return E1000_SUCCESS; +} + /****************************************************************************** * Get PHY information from various PHY registers fot m88 PHY only. * @@ -7630,4 +7786,846 @@ e1000_arc_subsystem_valid(struct e1000_hw *hw) } +/****************************************************************************** + * Configure PCI-Ex no-snoop + * + * hw - Struct containing variables accessed by shared code. + * no_snoop - Bitmap of no-snoop events. + * + * returns: E1000_SUCCESS + * + *****************************************************************************/ +int32_t +e1000_set_pci_ex_no_snoop(struct e1000_hw *hw, uint32_t no_snoop) +{ + uint32_t gcr_reg = 0; + + DEBUGFUNC("e1000_set_pci_ex_no_snoop"); + + if (hw->bus_type == e1000_bus_type_unknown) + e1000_get_bus_info(hw); + + if (hw->bus_type != e1000_bus_type_pci_express) + return E1000_SUCCESS; + + if (no_snoop) { + gcr_reg = E1000_READ_REG(hw, GCR); + gcr_reg &= ~(PCI_EX_NO_SNOOP_ALL); + gcr_reg |= no_snoop; + E1000_WRITE_REG(hw, GCR, gcr_reg); + } + if (hw->mac_type == e1000_ich8lan) { + uint32_t ctrl_ext; + + E1000_WRITE_REG(hw, GCR, PCI_EX_82566_SNOOP_ALL); + + ctrl_ext = E1000_READ_REG(hw, CTRL_EXT); + ctrl_ext |= E1000_CTRL_EXT_RO_DIS; + E1000_WRITE_REG(hw, CTRL_EXT, ctrl_ext); + } + + return E1000_SUCCESS; +} + +/*************************************************************************** + * + * Get software semaphore FLAG bit (SWFLAG). + * SWFLAG is used to synchronize the access to all shared resource between + * SW, FW and HW. + * + * hw: Struct containing variables accessed by shared code + * + ***************************************************************************/ +int32_t +e1000_get_software_flag(struct e1000_hw *hw) +{ + int32_t timeout = PHY_CFG_TIMEOUT; + uint32_t extcnf_ctrl; + + DEBUGFUNC("e1000_get_software_flag"); + + if (hw->mac_type == e1000_ich8lan) { + while (timeout) { + extcnf_ctrl = E1000_READ_REG(hw, EXTCNF_CTRL); + extcnf_ctrl |= E1000_EXTCNF_CTRL_SWFLAG; + E1000_WRITE_REG(hw, EXTCNF_CTRL, extcnf_ctrl); + + extcnf_ctrl = E1000_READ_REG(hw, EXTCNF_CTRL); + if (extcnf_ctrl & E1000_EXTCNF_CTRL_SWFLAG) + break; + msec_delay_irq(1); + timeout--; + } + + if (!timeout) { + DEBUGOUT("FW or HW locks the resource too long.\n"); + return -E1000_ERR_CONFIG; + } + } + + return E1000_SUCCESS; +} + +/*************************************************************************** + * + * Release software semaphore FLAG bit (SWFLAG). + * SWFLAG is used to synchronize the access to all shared resource between + * SW, FW and HW. + * + * hw: Struct containing variables accessed by shared code + * + ***************************************************************************/ +void +e1000_release_software_flag(struct e1000_hw *hw) +{ + uint32_t extcnf_ctrl; + + DEBUGFUNC("e1000_release_software_flag"); + + if (hw->mac_type == e1000_ich8lan) { + extcnf_ctrl= E1000_READ_REG(hw, EXTCNF_CTRL); + extcnf_ctrl &= ~E1000_EXTCNF_CTRL_SWFLAG; + E1000_WRITE_REG(hw, EXTCNF_CTRL, extcnf_ctrl); + } + + return; +} + +/*************************************************************************** + * + * Disable dynamic power down mode in ife PHY. + * It can be used to workaround band-gap problem. + * + * hw: Struct containing variables accessed by shared code + * + ***************************************************************************/ +int32_t +e1000_ife_disable_dynamic_power_down(struct e1000_hw *hw) +{ + uint16_t phy_data; + int32_t ret_val = E1000_SUCCESS; + + DEBUGFUNC("e1000_ife_disable_dynamic_power_down"); + + if (hw->phy_type == e1000_phy_ife) { + ret_val = e1000_read_phy_reg(hw, IFE_PHY_SPECIAL_CONTROL, &phy_data); + if (ret_val) + return ret_val; + + phy_data |= IFE_PSC_DISABLE_DYNAMIC_POWER_DOWN; + ret_val = e1000_write_phy_reg(hw, IFE_PHY_SPECIAL_CONTROL, phy_data); + } + + return ret_val; +} + +/*************************************************************************** + * + * Enable dynamic power down mode in ife PHY. + * It can be used to workaround band-gap problem. + * + * hw: Struct containing variables accessed by shared code + * + ***************************************************************************/ +int32_t +e1000_ife_enable_dynamic_power_down(struct e1000_hw *hw) +{ + uint16_t phy_data; + int32_t ret_val = E1000_SUCCESS; + + DEBUGFUNC("e1000_ife_enable_dynamic_power_down"); + + if (hw->phy_type == e1000_phy_ife) { + ret_val = e1000_read_phy_reg(hw, IFE_PHY_SPECIAL_CONTROL, &phy_data); + if (ret_val) + return ret_val; + + phy_data &= ~IFE_PSC_DISABLE_DYNAMIC_POWER_DOWN; + ret_val = e1000_write_phy_reg(hw, IFE_PHY_SPECIAL_CONTROL, phy_data); + } + + return ret_val; +} + +/****************************************************************************** + * Reads a 16 bit word or words from the EEPROM using the ICH8's flash access + * register. + * + * hw - Struct containing variables accessed by shared code + * offset - offset of word in the EEPROM to read + * data - word read from the EEPROM + * words - number of words to read + *****************************************************************************/ +int32_t +e1000_read_eeprom_ich8(struct e1000_hw *hw, uint16_t offset, uint16_t words, + uint16_t *data) +{ + int32_t error = E1000_SUCCESS; + uint32_t flash_bank = 0; + uint32_t act_offset = 0; + uint32_t bank_offset = 0; + uint16_t word = 0; + uint16_t i = 0; + + /* We need to know which is the valid flash bank. In the event + * that we didn't allocate eeprom_shadow_ram, we may not be + * managing flash_bank. So it cannot be trusted and needs + * to be updated with each read. + */ + /* Value of bit 22 corresponds to the flash bank we're on. */ + flash_bank = (E1000_READ_REG(hw, EECD) & E1000_EECD_SEC1VAL) ? 1 : 0; + + /* Adjust offset appropriately if we're on bank 1 - adjust for word size */ + bank_offset = flash_bank * (hw->flash_bank_size * 2); + + error = e1000_get_software_flag(hw); + if (error != E1000_SUCCESS) + return error; + + for (i = 0; i < words; i++) { + if (hw->eeprom_shadow_ram != NULL && + hw->eeprom_shadow_ram[offset+i].modified == TRUE) { + data[i] = hw->eeprom_shadow_ram[offset+i].eeprom_word; + } else { + /* The NVM part needs a byte offset, hence * 2 */ + act_offset = bank_offset + ((offset + i) * 2); + error = e1000_read_ich8_word(hw, act_offset, &word); + if (error != E1000_SUCCESS) + break; + data[i] = word; + } + } + + e1000_release_software_flag(hw); + + return error; +} + +/****************************************************************************** + * Writes a 16 bit word or words to the EEPROM using the ICH8's flash access + * register. Actually, writes are written to the shadow ram cache in the hw + * structure hw->e1000_shadow_ram. e1000_commit_shadow_ram flushes this to + * the NVM, which occurs when the NVM checksum is updated. + * + * hw - Struct containing variables accessed by shared code + * offset - offset of word in the EEPROM to write + * words - number of words to write + * data - words to write to the EEPROM + *****************************************************************************/ +int32_t +e1000_write_eeprom_ich8(struct e1000_hw *hw, uint16_t offset, uint16_t words, + uint16_t *data) +{ + uint32_t i = 0; + int32_t error = E1000_SUCCESS; + + error = e1000_get_software_flag(hw); + if (error != E1000_SUCCESS) + return error; + + /* A driver can write to the NVM only if it has eeprom_shadow_ram + * allocated. Subsequent reads to the modified words are read from + * this cached structure as well. Writes will only go into this + * cached structure unless it's followed by a call to + * e1000_update_eeprom_checksum() where it will commit the changes + * and clear the "modified" field. + */ + if (hw->eeprom_shadow_ram != NULL) { + for (i = 0; i < words; i++) { + if ((offset + i) < E1000_SHADOW_RAM_WORDS) { + hw->eeprom_shadow_ram[offset+i].modified = TRUE; + hw->eeprom_shadow_ram[offset+i].eeprom_word = data[i]; + } else { + error = -E1000_ERR_EEPROM; + break; + } + } + } else { + /* Drivers have the option to not allocate eeprom_shadow_ram as long + * as they don't perform any NVM writes. An attempt in doing so + * will result in this error. + */ + error = -E1000_ERR_EEPROM; + } + + e1000_release_software_flag(hw); + + return error; +} + +/****************************************************************************** + * This function does initial flash setup so that a new read/write/erase cycle + * can be started. + * + * hw - The pointer to the hw structure + ****************************************************************************/ +int32_t +e1000_ich8_cycle_init(struct e1000_hw *hw) +{ + union ich8_hws_flash_status hsfsts; + int32_t error = E1000_ERR_EEPROM; + int32_t i = 0; + + DEBUGFUNC("e1000_ich8_cycle_init"); + + hsfsts.regval = E1000_READ_ICH8_REG16(hw, ICH8_FLASH_HSFSTS); + + /* May be check the Flash Des Valid bit in Hw status */ + if (hsfsts.hsf_status.fldesvalid == 0) { + DEBUGOUT("Flash descriptor invalid. SW Sequencing must be used."); + return error; + } + + /* Clear FCERR in Hw status by writing 1 */ + /* Clear DAEL in Hw status by writing a 1 */ + hsfsts.hsf_status.flcerr = 1; + hsfsts.hsf_status.dael = 1; + + E1000_WRITE_ICH8_REG16(hw, ICH8_FLASH_HSFSTS, hsfsts.regval); + + /* Either we should have a hardware SPI cycle in progress bit to check + * against, in order to start a new cycle or FDONE bit should be changed + * in the hardware so that it is 1 after harware reset, which can then be + * used as an indication whether a cycle is in progress or has been + * completed .. we should also have some software semaphore mechanism to + * guard FDONE or the cycle in progress bit so that two threads access to + * those bits can be sequentiallized or a way so that 2 threads dont + * start the cycle at the same time */ + + if (hsfsts.hsf_status.flcinprog == 0) { + /* There is no cycle running at present, so we can start a cycle */ + /* Begin by setting Flash Cycle Done. */ + hsfsts.hsf_status.flcdone = 1; + E1000_WRITE_ICH8_REG16(hw, ICH8_FLASH_HSFSTS, hsfsts.regval); + error = E1000_SUCCESS; + } else { + /* otherwise poll for sometime so the current cycle has a chance + * to end before giving up. */ + for (i = 0; i < ICH8_FLASH_COMMAND_TIMEOUT; i++) { + hsfsts.regval = E1000_READ_ICH8_REG16(hw, ICH8_FLASH_HSFSTS); + if (hsfsts.hsf_status.flcinprog == 0) { + error = E1000_SUCCESS; + break; + } + udelay(1); + } + if (error == E1000_SUCCESS) { + /* Successful in waiting for previous cycle to timeout, + * now set the Flash Cycle Done. */ + hsfsts.hsf_status.flcdone = 1; + E1000_WRITE_ICH8_REG16(hw, ICH8_FLASH_HSFSTS, hsfsts.regval); + } else { + DEBUGOUT("Flash controller busy, cannot get access"); + } + } + return error; +} + +/****************************************************************************** + * This function starts a flash cycle and waits for its completion + * + * hw - The pointer to the hw structure + ****************************************************************************/ +int32_t +e1000_ich8_flash_cycle(struct e1000_hw *hw, uint32_t timeout) +{ + union ich8_hws_flash_ctrl hsflctl; + union ich8_hws_flash_status hsfsts; + int32_t error = E1000_ERR_EEPROM; + uint32_t i = 0; + + /* Start a cycle by writing 1 in Flash Cycle Go in Hw Flash Control */ + hsflctl.regval = E1000_READ_ICH8_REG16(hw, ICH8_FLASH_HSFCTL); + hsflctl.hsf_ctrl.flcgo = 1; + E1000_WRITE_ICH8_REG16(hw, ICH8_FLASH_HSFCTL, hsflctl.regval); + + /* wait till FDONE bit is set to 1 */ + do { + hsfsts.regval = E1000_READ_ICH8_REG16(hw, ICH8_FLASH_HSFSTS); + if (hsfsts.hsf_status.flcdone == 1) + break; + udelay(1); + i++; + } while (i < timeout); + if (hsfsts.hsf_status.flcdone == 1 && hsfsts.hsf_status.flcerr == 0) { + error = E1000_SUCCESS; + } + return error; +} + +/****************************************************************************** + * Reads a byte or word from the NVM using the ICH8 flash access registers. + * + * hw - The pointer to the hw structure + * index - The index of the byte or word to read. + * size - Size of data to read, 1=byte 2=word + * data - Pointer to the word to store the value read. + *****************************************************************************/ +int32_t +e1000_read_ich8_data(struct e1000_hw *hw, uint32_t index, + uint32_t size, uint16_t* data) +{ + union ich8_hws_flash_status hsfsts; + union ich8_hws_flash_ctrl hsflctl; + uint32_t flash_linear_address; + uint32_t flash_data = 0; + int32_t error = -E1000_ERR_EEPROM; + int32_t count = 0; + + DEBUGFUNC("e1000_read_ich8_data"); + + if (size < 1 || size > 2 || data == 0x0 || + index > ICH8_FLASH_LINEAR_ADDR_MASK) + return error; + + flash_linear_address = (ICH8_FLASH_LINEAR_ADDR_MASK & index) + + hw->flash_base_addr; + + do { + udelay(1); + /* Steps */ + error = e1000_ich8_cycle_init(hw); + if (error != E1000_SUCCESS) + break; + + hsflctl.regval = E1000_READ_ICH8_REG16(hw, ICH8_FLASH_HSFCTL); + /* 0b/1b corresponds to 1 or 2 byte size, respectively. */ + hsflctl.hsf_ctrl.fldbcount = size - 1; + hsflctl.hsf_ctrl.flcycle = ICH8_CYCLE_READ; + E1000_WRITE_ICH8_REG16(hw, ICH8_FLASH_HSFCTL, hsflctl.regval); + + /* Write the last 24 bits of index into Flash Linear address field in + * Flash Address */ + /* TODO: TBD maybe check the index against the size of flash */ + + E1000_WRITE_ICH8_REG(hw, ICH8_FLASH_FADDR, flash_linear_address); + + error = e1000_ich8_flash_cycle(hw, ICH8_FLASH_COMMAND_TIMEOUT); + + /* Check if FCERR is set to 1, if set to 1, clear it and try the whole + * sequence a few more times, else read in (shift in) the Flash Data0, + * the order is least significant byte first msb to lsb */ + if (error == E1000_SUCCESS) { + flash_data = E1000_READ_ICH8_REG(hw, ICH8_FLASH_FDATA0); + if (size == 1) { + *data = (uint8_t)(flash_data & 0x000000FF); + } else if (size == 2) { + *data = (uint16_t)(flash_data & 0x0000FFFF); + } + break; + } else { + /* If we've gotten here, then things are probably completely hosed, + * but if the error condition is detected, it won't hurt to give + * it another try...ICH8_FLASH_CYCLE_REPEAT_COUNT times. + */ + hsfsts.regval = E1000_READ_ICH8_REG16(hw, ICH8_FLASH_HSFSTS); + if (hsfsts.hsf_status.flcerr == 1) { + /* Repeat for some time before giving up. */ + continue; + } else if (hsfsts.hsf_status.flcdone == 0) { + DEBUGOUT("Timeout error - flash cycle did not complete."); + break; + } + } + } while (count++ < ICH8_FLASH_CYCLE_REPEAT_COUNT); + + return error; +} + +/****************************************************************************** + * Writes One /two bytes to the NVM using the ICH8 flash access registers. + * + * hw - The pointer to the hw structure + * index - The index of the byte/word to read. + * size - Size of data to read, 1=byte 2=word + * data - The byte(s) to write to the NVM. + *****************************************************************************/ +int32_t +e1000_write_ich8_data(struct e1000_hw *hw, uint32_t index, uint32_t size, + uint16_t data) +{ + union ich8_hws_flash_status hsfsts; + union ich8_hws_flash_ctrl hsflctl; + uint32_t flash_linear_address; + uint32_t flash_data = 0; + int32_t error = -E1000_ERR_EEPROM; + int32_t count = 0; + + DEBUGFUNC("e1000_write_ich8_data"); + + if (size < 1 || size > 2 || data > size * 0xff || + index > ICH8_FLASH_LINEAR_ADDR_MASK) + return error; + + flash_linear_address = (ICH8_FLASH_LINEAR_ADDR_MASK & index) + + hw->flash_base_addr; + + do { + udelay(1); + /* Steps */ + error = e1000_ich8_cycle_init(hw); + if (error != E1000_SUCCESS) + break; + + hsflctl.regval = E1000_READ_ICH8_REG16(hw, ICH8_FLASH_HSFCTL); + /* 0b/1b corresponds to 1 or 2 byte size, respectively. */ + hsflctl.hsf_ctrl.fldbcount = size -1; + hsflctl.hsf_ctrl.flcycle = ICH8_CYCLE_WRITE; + E1000_WRITE_ICH8_REG16(hw, ICH8_FLASH_HSFCTL, hsflctl.regval); + + /* Write the last 24 bits of index into Flash Linear address field in + * Flash Address */ + E1000_WRITE_ICH8_REG(hw, ICH8_FLASH_FADDR, flash_linear_address); + + if (size == 1) + flash_data = (uint32_t)data & 0x00FF; + else + flash_data = (uint32_t)data; + + E1000_WRITE_ICH8_REG(hw, ICH8_FLASH_FDATA0, flash_data); + + /* check if FCERR is set to 1 , if set to 1, clear it and try the whole + * sequence a few more times else done */ + error = e1000_ich8_flash_cycle(hw, ICH8_FLASH_COMMAND_TIMEOUT); + if (error == E1000_SUCCESS) { + break; + } else { + /* If we're here, then things are most likely completely hosed, + * but if the error condition is detected, it won't hurt to give + * it another try...ICH8_FLASH_CYCLE_REPEAT_COUNT times. + */ + hsfsts.regval = E1000_READ_ICH8_REG16(hw, ICH8_FLASH_HSFSTS); + if (hsfsts.hsf_status.flcerr == 1) { + /* Repeat for some time before giving up. */ + continue; + } else if (hsfsts.hsf_status.flcdone == 0) { + DEBUGOUT("Timeout error - flash cycle did not complete."); + break; + } + } + } while (count++ < ICH8_FLASH_CYCLE_REPEAT_COUNT); + + return error; +} + +/****************************************************************************** + * Reads a single byte from the NVM using the ICH8 flash access registers. + * + * hw - pointer to e1000_hw structure + * index - The index of the byte to read. + * data - Pointer to a byte to store the value read. + *****************************************************************************/ +int32_t +e1000_read_ich8_byte(struct e1000_hw *hw, uint32_t index, uint8_t* data) +{ + int32_t status = E1000_SUCCESS; + uint16_t word = 0; + + status = e1000_read_ich8_data(hw, index, 1, &word); + if (status == E1000_SUCCESS) { + *data = (uint8_t)word; + } + + return status; +} + +/****************************************************************************** + * Writes a single byte to the NVM using the ICH8 flash access registers. + * Performs verification by reading back the value and then going through + * a retry algorithm before giving up. + * + * hw - pointer to e1000_hw structure + * index - The index of the byte to write. + * byte - The byte to write to the NVM. + *****************************************************************************/ +int32_t +e1000_verify_write_ich8_byte(struct e1000_hw *hw, uint32_t index, uint8_t byte) +{ + int32_t error = E1000_SUCCESS; + int32_t program_retries; + uint8_t temp_byte; + + e1000_write_ich8_byte(hw, index, byte); + udelay(100); + + for (program_retries = 0; program_retries < 100; program_retries++) { + e1000_read_ich8_byte(hw, index, &temp_byte); + if (temp_byte == byte) + break; + udelay(10); + e1000_write_ich8_byte(hw, index, byte); + udelay(100); + } + if (program_retries == 100) + error = E1000_ERR_EEPROM; + + return error; +} + +/****************************************************************************** + * Writes a single byte to the NVM using the ICH8 flash access registers. + * + * hw - pointer to e1000_hw structure + * index - The index of the byte to read. + * data - The byte to write to the NVM. + *****************************************************************************/ +int32_t +e1000_write_ich8_byte(struct e1000_hw *hw, uint32_t index, uint8_t data) +{ + int32_t status = E1000_SUCCESS; + uint16_t word = (uint16_t)data; + + status = e1000_write_ich8_data(hw, index, 1, word); + + return status; +} + +/****************************************************************************** + * Reads a word from the NVM using the ICH8 flash access registers. + * + * hw - pointer to e1000_hw structure + * index - The starting byte index of the word to read. + * data - Pointer to a word to store the value read. + *****************************************************************************/ +int32_t +e1000_read_ich8_word(struct e1000_hw *hw, uint32_t index, uint16_t *data) +{ + int32_t status = E1000_SUCCESS; + status = e1000_read_ich8_data(hw, index, 2, data); + return status; +} + +/****************************************************************************** + * Writes a word to the NVM using the ICH8 flash access registers. + * + * hw - pointer to e1000_hw structure + * index - The starting byte index of the word to read. + * data - The word to write to the NVM. + *****************************************************************************/ +int32_t +e1000_write_ich8_word(struct e1000_hw *hw, uint32_t index, uint16_t data) +{ + int32_t status = E1000_SUCCESS; + status = e1000_write_ich8_data(hw, index, 2, data); + return status; +} + +/****************************************************************************** + * Erases the bank specified. Each bank is a 4k block. Segments are 0 based. + * segment N is 4096 * N + flash_reg_addr. + * + * hw - pointer to e1000_hw structure + * segment - 0 for first segment, 1 for second segment, etc. + *****************************************************************************/ +int32_t +e1000_erase_ich8_4k_segment(struct e1000_hw *hw, uint32_t segment) +{ + union ich8_hws_flash_status hsfsts; + union ich8_hws_flash_ctrl hsflctl; + uint32_t flash_linear_address; + int32_t count = 0; + int32_t error = E1000_ERR_EEPROM; + int32_t iteration, seg_size; + int32_t sector_size; + int32_t j = 0; + int32_t error_flag = 0; + + hsfsts.regval = E1000_READ_ICH8_REG16(hw, ICH8_FLASH_HSFSTS); + + /* Determine HW Sector size: Read BERASE bits of Hw flash Status register */ + /* 00: The Hw sector is 256 bytes, hence we need to erase 16 + * consecutive sectors. The start index for the nth Hw sector can be + * calculated as = segment * 4096 + n * 256 + * 01: The Hw sector is 4K bytes, hence we need to erase 1 sector. + * The start index for the nth Hw sector can be calculated + * as = segment * 4096 + * 10: Error condition + * 11: The Hw sector size is much bigger than the size asked to + * erase...error condition */ + if (hsfsts.hsf_status.berasesz == 0x0) { + /* Hw sector size 256 */ + sector_size = seg_size = ICH8_FLASH_SEG_SIZE_256; + iteration = ICH8_FLASH_SECTOR_SIZE / ICH8_FLASH_SEG_SIZE_256; + } else if (hsfsts.hsf_status.berasesz == 0x1) { + sector_size = seg_size = ICH8_FLASH_SEG_SIZE_4K; + iteration = 1; + } else if (hsfsts.hsf_status.berasesz == 0x3) { + sector_size = seg_size = ICH8_FLASH_SEG_SIZE_64K; + iteration = 1; + } else { + return error; + } + + for (j = 0; j < iteration ; j++) { + do { + count++; + /* Steps */ + error = e1000_ich8_cycle_init(hw); + if (error != E1000_SUCCESS) { + error_flag = 1; + break; + } + + /* Write a value 11 (block Erase) in Flash Cycle field in Hw flash + * Control */ + hsflctl.regval = E1000_READ_ICH8_REG16(hw, ICH8_FLASH_HSFCTL); + hsflctl.hsf_ctrl.flcycle = ICH8_CYCLE_ERASE; + E1000_WRITE_ICH8_REG16(hw, ICH8_FLASH_HSFCTL, hsflctl.regval); + + /* Write the last 24 bits of an index within the block into Flash + * Linear address field in Flash Address. This probably needs to + * be calculated here based off the on-chip segment size and the + * software segment size assumed (4K) */ + /* TBD */ + flash_linear_address = segment * sector_size + j * seg_size; + flash_linear_address &= ICH8_FLASH_LINEAR_ADDR_MASK; + flash_linear_address += hw->flash_base_addr; + + E1000_WRITE_ICH8_REG(hw, ICH8_FLASH_FADDR, flash_linear_address); + + error = e1000_ich8_flash_cycle(hw, 1000000); + /* Check if FCERR is set to 1. If 1, clear it and try the whole + * sequence a few more times else Done */ + if (error == E1000_SUCCESS) { + break; + } else { + hsfsts.regval = E1000_READ_ICH8_REG16(hw, ICH8_FLASH_HSFSTS); + if (hsfsts.hsf_status.flcerr == 1) { + /* repeat for some time before giving up */ + continue; + } else if (hsfsts.hsf_status.flcdone == 0) { + error_flag = 1; + break; + } + } + } while ((count < ICH8_FLASH_CYCLE_REPEAT_COUNT) && !error_flag); + if (error_flag == 1) + break; + } + if (error_flag != 1) + error = E1000_SUCCESS; + return error; +} + +/****************************************************************************** + * + * Reverse duplex setting without breaking the link. + * + * hw: Struct containing variables accessed by shared code + * + *****************************************************************************/ +int32_t +e1000_duplex_reversal(struct e1000_hw *hw) +{ + int32_t ret_val; + uint16_t phy_data; + + if (hw->phy_type != e1000_phy_igp_3) + return E1000_SUCCESS; + + ret_val = e1000_read_phy_reg(hw, PHY_CTRL, &phy_data); + if (ret_val) + return ret_val; + + phy_data ^= MII_CR_FULL_DUPLEX; + + ret_val = e1000_write_phy_reg(hw, PHY_CTRL, phy_data); + if (ret_val) + return ret_val; + + ret_val = e1000_read_phy_reg(hw, IGP3E1000_PHY_MISC_CTRL, &phy_data); + if (ret_val) + return ret_val; + + phy_data |= IGP3_PHY_MISC_DUPLEX_MANUAL_SET; + ret_val = e1000_write_phy_reg(hw, IGP3E1000_PHY_MISC_CTRL, phy_data); + + return ret_val; +} + +int32_t +e1000_init_lcd_from_nvm_config_region(struct e1000_hw *hw, + uint32_t cnf_base_addr, uint32_t cnf_size) +{ + uint32_t ret_val = E1000_SUCCESS; + uint16_t word_addr, reg_data, reg_addr; + uint16_t i; + + /* cnf_base_addr is in DWORD */ + word_addr = (uint16_t)(cnf_base_addr << 1); + + /* cnf_size is returned in size of dwords */ + for (i = 0; i < cnf_size; i++) { + ret_val = e1000_read_eeprom(hw, (word_addr + i*2), 1, ®_data); + if (ret_val) + return ret_val; + + ret_val = e1000_read_eeprom(hw, (word_addr + i*2 + 1), 1, ®_addr); + if (ret_val) + return ret_val; + + ret_val = e1000_get_software_flag(hw); + if (ret_val != E1000_SUCCESS) + return ret_val; + + ret_val = e1000_write_phy_reg_ex(hw, (uint32_t)reg_addr, reg_data); + + e1000_release_software_flag(hw); + } + + return ret_val; +} + + +int32_t +e1000_init_lcd_from_nvm(struct e1000_hw *hw) +{ + uint32_t reg_data, cnf_base_addr, cnf_size, ret_val, loop; + + if (hw->phy_type != e1000_phy_igp_3) + return E1000_SUCCESS; + + /* Check if SW needs configure the PHY */ + reg_data = E1000_READ_REG(hw, FEXTNVM); + if (!(reg_data & FEXTNVM_SW_CONFIG)) + return E1000_SUCCESS; + + /* Wait for basic configuration completes before proceeding*/ + loop = 0; + do { + reg_data = E1000_READ_REG(hw, STATUS) & E1000_STATUS_LAN_INIT_DONE; + udelay(100); + loop++; + } while ((!reg_data) && (loop < 50)); + + /* Clear the Init Done bit for the next init event */ + reg_data = E1000_READ_REG(hw, STATUS); + reg_data &= ~E1000_STATUS_LAN_INIT_DONE; + E1000_WRITE_REG(hw, STATUS, reg_data); + + /* Make sure HW does not configure LCD from PHY extended configuration + before SW configuration */ + reg_data = E1000_READ_REG(hw, EXTCNF_CTRL); + if ((reg_data & E1000_EXTCNF_CTRL_LCD_WRITE_ENABLE) == 0x0000) { + reg_data = E1000_READ_REG(hw, EXTCNF_SIZE); + cnf_size = reg_data & E1000_EXTCNF_SIZE_EXT_PCIE_LENGTH; + cnf_size >>= 16; + if (cnf_size) { + reg_data = E1000_READ_REG(hw, EXTCNF_CTRL); + cnf_base_addr = reg_data & E1000_EXTCNF_CTRL_EXT_CNF_POINTER; + /* cnf_base_addr is in DWORD */ + cnf_base_addr >>= 16; + + /* Configure LCD from extended configuration region. */ + ret_val = e1000_init_lcd_from_nvm_config_region(hw, cnf_base_addr, + cnf_size); + if (ret_val) + return ret_val; + } + } + + return E1000_SUCCESS; +} + + diff --git a/drivers/net/e1000/e1000_hw.h b/drivers/net/e1000/e1000_hw.h index 1908e0d3110..f9341e3276b 100644 --- a/drivers/net/e1000/e1000_hw.h +++ b/drivers/net/e1000/e1000_hw.h @@ -62,6 +62,7 @@ typedef enum { e1000_82572, e1000_82573, e1000_80003es2lan, + e1000_ich8lan, e1000_num_macs } e1000_mac_type; @@ -70,6 +71,7 @@ typedef enum { e1000_eeprom_spi, e1000_eeprom_microwire, e1000_eeprom_flash, + e1000_eeprom_ich8, e1000_eeprom_none, /* No NVM support */ e1000_num_eeprom_types } e1000_eeprom_type; @@ -98,6 +100,11 @@ typedef enum { e1000_fc_default = 0xFF } e1000_fc_type; +struct e1000_shadow_ram { + uint16_t eeprom_word; + boolean_t modified; +}; + /* PCI bus types */ typedef enum { e1000_bus_type_unknown = 0, @@ -218,6 +225,8 @@ typedef enum { e1000_phy_igp, e1000_phy_igp_2, e1000_phy_gg82563, + e1000_phy_igp_3, + e1000_phy_ife, e1000_phy_undefined = 0xFF } e1000_phy_type; @@ -313,6 +322,10 @@ int32_t e1000_read_phy_reg(struct e1000_hw *hw, uint32_t reg_addr, uint16_t *phy int32_t e1000_write_phy_reg(struct e1000_hw *hw, uint32_t reg_addr, uint16_t data); int32_t e1000_phy_hw_reset(struct e1000_hw *hw); int32_t e1000_phy_reset(struct e1000_hw *hw); +void e1000_phy_powerdown_workaround(struct e1000_hw *hw); +int32_t e1000_kumeran_lock_loss_workaround(struct e1000_hw *hw); +int32_t e1000_init_lcd_from_nvm_config_region(struct e1000_hw *hw, uint32_t cnf_base_addr, uint32_t cnf_size); +int32_t e1000_init_lcd_from_nvm(struct e1000_hw *hw); int32_t e1000_phy_get_info(struct e1000_hw *hw, struct e1000_phy_info *phy_info); int32_t e1000_validate_mdi_setting(struct e1000_hw *hw); int32_t e1000_read_kmrn_reg(struct e1000_hw *hw, uint32_t reg_addr, uint16_t *data); @@ -331,6 +344,7 @@ uint32_t e1000_enable_mng_pass_thru(struct e1000_hw *hw); #define E1000_MNG_DHCP_COOKIE_OFFSET 0x6F0 /* Cookie offset */ #define E1000_MNG_DHCP_COOKIE_LENGTH 0x10 /* Cookie length */ #define E1000_MNG_IAMT_MODE 0x3 +#define E1000_MNG_ICH_IAMT_MODE 0x2 #define E1000_IAMT_SIGNATURE 0x544D4149 /* Intel(R) Active Management Technology signature */ #define E1000_MNG_DHCP_COOKIE_STATUS_PARSING_SUPPORT 0x1 /* DHCP parsing enabled */ @@ -388,6 +402,8 @@ int32_t e1000_read_part_num(struct e1000_hw *hw, uint32_t * part_num); int32_t e1000_read_mac_addr(struct e1000_hw * hw); int32_t e1000_swfw_sync_acquire(struct e1000_hw *hw, uint16_t mask); void e1000_swfw_sync_release(struct e1000_hw *hw, uint16_t mask); +void e1000_release_software_flag(struct e1000_hw *hw); +int32_t e1000_get_software_flag(struct e1000_hw *hw); /* Filters (multicast, vlan, receive) */ void e1000_mc_addr_list_update(struct e1000_hw *hw, uint8_t * mc_addr_list, uint32_t mc_addr_count, uint32_t pad, uint32_t rar_used_count); @@ -423,6 +439,29 @@ int32_t e1000_disable_pciex_master(struct e1000_hw *hw); int32_t e1000_get_software_semaphore(struct e1000_hw *hw); void e1000_release_software_semaphore(struct e1000_hw *hw); int32_t e1000_check_phy_reset_block(struct e1000_hw *hw); +int32_t e1000_set_pci_ex_no_snoop(struct e1000_hw *hw, uint32_t no_snoop); + +int32_t e1000_read_ich8_byte(struct e1000_hw *hw, uint32_t index, + uint8_t *data); +int32_t e1000_verify_write_ich8_byte(struct e1000_hw *hw, uint32_t index, + uint8_t byte); +int32_t e1000_write_ich8_byte(struct e1000_hw *hw, uint32_t index, + uint8_t byte); +int32_t e1000_read_ich8_word(struct e1000_hw *hw, uint32_t index, + uint16_t *data); +int32_t e1000_read_ich8_data(struct e1000_hw *hw, uint32_t index, + uint32_t size, uint16_t *data); +int32_t e1000_read_eeprom_ich8(struct e1000_hw *hw, uint16_t offset, + uint16_t words, uint16_t *data); +int32_t e1000_write_eeprom_ich8(struct e1000_hw *hw, uint16_t offset, + uint16_t words, uint16_t *data); +int32_t e1000_erase_ich8_4k_segment(struct e1000_hw *hw, uint32_t segment); + + +#define E1000_READ_REG_IO(a, reg) \ + e1000_read_reg_io((a), E1000_##reg) +#define E1000_WRITE_REG_IO(a, reg, val) \ + e1000_write_reg_io((a), E1000_##reg, val) /* PCI Device IDs */ #define E1000_DEV_ID_82542 0x1000 @@ -447,6 +486,7 @@ int32_t e1000_check_phy_reset_block(struct e1000_hw *hw); #define E1000_DEV_ID_82546EB_QUAD_COPPER 0x101D #define E1000_DEV_ID_82541EI 0x1013 #define E1000_DEV_ID_82541EI_MOBILE 0x1018 +#define E1000_DEV_ID_82541ER_LOM 0x1014 #define E1000_DEV_ID_82541ER 0x1078 #define E1000_DEV_ID_82547GI 0x1075 #define E1000_DEV_ID_82541GI 0x1076 @@ -458,18 +498,28 @@ int32_t e1000_check_phy_reset_block(struct e1000_hw *hw); #define E1000_DEV_ID_82546GB_PCIE 0x108A #define E1000_DEV_ID_82546GB_QUAD_COPPER 0x1099 #define E1000_DEV_ID_82547EI 0x1019 +#define E1000_DEV_ID_82547EI_MOBILE 0x101A #define E1000_DEV_ID_82571EB_COPPER 0x105E #define E1000_DEV_ID_82571EB_FIBER 0x105F #define E1000_DEV_ID_82571EB_SERDES 0x1060 #define E1000_DEV_ID_82572EI_COPPER 0x107D #define E1000_DEV_ID_82572EI_FIBER 0x107E #define E1000_DEV_ID_82572EI_SERDES 0x107F +#define E1000_DEV_ID_82572EI 0x10B9 #define E1000_DEV_ID_82573E 0x108B #define E1000_DEV_ID_82573E_IAMT 0x108C #define E1000_DEV_ID_82573L 0x109A #define E1000_DEV_ID_82546GB_QUAD_COPPER_KSP3 0x10B5 #define E1000_DEV_ID_80003ES2LAN_COPPER_DPT 0x1096 #define E1000_DEV_ID_80003ES2LAN_SERDES_DPT 0x1098 +#define E1000_DEV_ID_80003ES2LAN_COPPER_SPT 0x10BA +#define E1000_DEV_ID_80003ES2LAN_SERDES_SPT 0x10BB + +#define E1000_DEV_ID_ICH8_IGP_M_AMT 0x1049 +#define E1000_DEV_ID_ICH8_IGP_AMT 0x104A +#define E1000_DEV_ID_ICH8_IGP_C 0x104B +#define E1000_DEV_ID_ICH8_IFE 0x104C +#define E1000_DEV_ID_ICH8_IGP_M 0x104D #define NODE_ADDRESS_SIZE 6 @@ -540,6 +590,14 @@ int32_t e1000_check_phy_reset_block(struct e1000_hw *hw); E1000_IMS_RXSEQ | \ E1000_IMS_LSC) +/* Additional interrupts need to be handled for e1000_ich8lan: + DSW = The FW changed the status of the DISSW bit in FWSM + PHYINT = The LAN connected device generates an interrupt + EPRST = Manageability reset event */ +#define IMS_ICH8LAN_ENABLE_MASK (\ + E1000_IMS_DSW | \ + E1000_IMS_PHYINT | \ + E1000_IMS_EPRST) /* Number of high/low register pairs in the RAR. The RAR (Receive Address * Registers) holds the directed and multicast addresses that we monitor. We @@ -547,6 +605,7 @@ int32_t e1000_check_phy_reset_block(struct e1000_hw *hw); * E1000_RAR_ENTRIES - 1 multicast addresses. */ #define E1000_RAR_ENTRIES 15 +#define E1000_RAR_ENTRIES_ICH8LAN 7 #define MIN_NUMBER_OF_DESCRIPTORS 8 #define MAX_NUMBER_OF_DESCRIPTORS 0xFFF8 @@ -768,6 +827,9 @@ struct e1000_data_desc { #define E1000_MC_TBL_SIZE 128 /* Multicast Filter Table (4096 bits) */ #define E1000_VLAN_FILTER_TBL_SIZE 128 /* VLAN Filter Table (4096 bits) */ +#define E1000_NUM_UNICAST_ICH8LAN 7 +#define E1000_MC_TBL_SIZE_ICH8LAN 32 + /* Receive Address Register */ struct e1000_rar { @@ -777,6 +839,7 @@ struct e1000_rar { /* Number of entries in the Multicast Table Array (MTA). */ #define E1000_NUM_MTA_REGISTERS 128 +#define E1000_NUM_MTA_REGISTERS_ICH8LAN 32 /* IPv4 Address Table Entry */ struct e1000_ipv4_at_entry { @@ -787,6 +850,7 @@ struct e1000_ipv4_at_entry { /* Four wakeup IP addresses are supported */ #define E1000_WAKEUP_IP_ADDRESS_COUNT_MAX 4 #define E1000_IP4AT_SIZE E1000_WAKEUP_IP_ADDRESS_COUNT_MAX +#define E1000_IP4AT_SIZE_ICH8LAN 3 #define E1000_IP6AT_SIZE 1 /* IPv6 Address Table Entry */ @@ -845,6 +909,7 @@ struct e1000_ffvt_entry { #define E1000_FLA 0x0001C /* Flash Access - RW */ #define E1000_MDIC 0x00020 /* MDI Control - RW */ #define E1000_SCTL 0x00024 /* SerDes Control - RW */ +#define E1000_FEXTNVM 0x00028 /* Future Extended NVM register */ #define E1000_FCAL 0x00028 /* Flow Control Address Low - RW */ #define E1000_FCAH 0x0002C /* Flow Control Address High -RW */ #define E1000_FCT 0x00030 /* Flow Control Type - RW */ @@ -873,6 +938,8 @@ struct e1000_ffvt_entry { #define E1000_LEDCTL 0x00E00 /* LED Control - RW */ #define E1000_EXTCNF_CTRL 0x00F00 /* Extended Configuration Control */ #define E1000_EXTCNF_SIZE 0x00F08 /* Extended Configuration Size */ +#define E1000_PHY_CTRL 0x00F10 /* PHY Control Register in CSR */ +#define FEXTNVM_SW_CONFIG 0x0001 #define E1000_PBA 0x01000 /* Packet Buffer Allocation - RW */ #define E1000_PBS 0x01008 /* Packet Buffer Size */ #define E1000_EEMNGCTL 0x01010 /* MNG EEprom Control */ @@ -900,11 +967,13 @@ struct e1000_ffvt_entry { #define E1000_RDH0 E1000_RDH /* RX Desc Head (0) - RW */ #define E1000_RDT0 E1000_RDT /* RX Desc Tail (0) - RW */ #define E1000_RDTR0 E1000_RDTR /* RX Delay Timer (0) - RW */ -#define E1000_RXDCTL 0x02828 /* RX Descriptor Control - RW */ +#define E1000_RXDCTL 0x02828 /* RX Descriptor Control queue 0 - RW */ +#define E1000_RXDCTL1 0x02928 /* RX Descriptor Control queue 1 - RW */ #define E1000_RADV 0x0282C /* RX Interrupt Absolute Delay Timer - RW */ #define E1000_RSRPD 0x02C00 /* RX Small Packet Detect - RW */ #define E1000_RAID 0x02C08 /* Receive Ack Interrupt Delay - RW */ #define E1000_TXDMAC 0x03000 /* TX DMA Control - RW */ +#define E1000_KABGTXD 0x03004 /* AFE Band Gap Transmit Ref Data */ #define E1000_TDFH 0x03410 /* TX Data FIFO Head - RW */ #define E1000_TDFT 0x03418 /* TX Data FIFO Tail - RW */ #define E1000_TDFHS 0x03420 /* TX Data FIFO Head Saved - RW */ @@ -1051,6 +1120,7 @@ struct e1000_ffvt_entry { #define E1000_82542_FLA E1000_FLA #define E1000_82542_MDIC E1000_MDIC #define E1000_82542_SCTL E1000_SCTL +#define E1000_82542_FEXTNVM E1000_FEXTNVM #define E1000_82542_FCAL E1000_FCAL #define E1000_82542_FCAH E1000_FCAH #define E1000_82542_FCT E1000_FCT @@ -1074,6 +1144,19 @@ struct e1000_ffvt_entry { #define E1000_82542_RDLEN0 E1000_82542_RDLEN #define E1000_82542_RDH0 E1000_82542_RDH #define E1000_82542_RDT0 E1000_82542_RDT +#define E1000_82542_SRRCTL(_n) (0x280C + ((_n) << 8)) /* Split and Replication + * RX Control - RW */ +#define E1000_82542_DCA_RXCTRL(_n) (0x02814 + ((_n) << 8)) +#define E1000_82542_RDBAH3 0x02B04 /* RX Desc Base High Queue 3 - RW */ +#define E1000_82542_RDBAL3 0x02B00 /* RX Desc Low Queue 3 - RW */ +#define E1000_82542_RDLEN3 0x02B08 /* RX Desc Length Queue 3 - RW */ +#define E1000_82542_RDH3 0x02B10 /* RX Desc Head Queue 3 - RW */ +#define E1000_82542_RDT3 0x02B18 /* RX Desc Tail Queue 3 - RW */ +#define E1000_82542_RDBAL2 0x02A00 /* RX Desc Base Low Queue 2 - RW */ +#define E1000_82542_RDBAH2 0x02A04 /* RX Desc Base High Queue 2 - RW */ +#define E1000_82542_RDLEN2 0x02A08 /* RX Desc Length Queue 2 - RW */ +#define E1000_82542_RDH2 0x02A10 /* RX Desc Head Queue 2 - RW */ +#define E1000_82542_RDT2 0x02A18 /* RX Desc Tail Queue 2 - RW */ #define E1000_82542_RDTR1 0x00130 #define E1000_82542_RDBAL1 0x00138 #define E1000_82542_RDBAH1 0x0013C @@ -1111,11 +1194,14 @@ struct e1000_ffvt_entry { #define E1000_82542_FLOP E1000_FLOP #define E1000_82542_EXTCNF_CTRL E1000_EXTCNF_CTRL #define E1000_82542_EXTCNF_SIZE E1000_EXTCNF_SIZE +#define E1000_82542_PHY_CTRL E1000_PHY_CTRL #define E1000_82542_ERT E1000_ERT #define E1000_82542_RXDCTL E1000_RXDCTL +#define E1000_82542_RXDCTL1 E1000_RXDCTL1 #define E1000_82542_RADV E1000_RADV #define E1000_82542_RSRPD E1000_RSRPD #define E1000_82542_TXDMAC E1000_TXDMAC +#define E1000_82542_KABGTXD E1000_KABGTXD #define E1000_82542_TDFHS E1000_TDFHS #define E1000_82542_TDFTS E1000_TDFTS #define E1000_82542_TDFPC E1000_TDFPC @@ -1311,13 +1397,16 @@ struct e1000_hw_stats { /* Structure containing variables used by the shared code (e1000_hw.c) */ struct e1000_hw { - uint8_t __iomem *hw_addr; + uint8_t *hw_addr; uint8_t *flash_address; e1000_mac_type mac_type; e1000_phy_type phy_type; uint32_t phy_init_script; e1000_media_type media_type; void *back; + struct e1000_shadow_ram *eeprom_shadow_ram; + uint32_t flash_bank_size; + uint32_t flash_base_addr; e1000_fc_type fc; e1000_bus_speed bus_speed; e1000_bus_width bus_width; @@ -1329,6 +1418,7 @@ struct e1000_hw { uint32_t asf_firmware_present; uint32_t eeprom_semaphore_present; uint32_t swfw_sync_present; + uint32_t swfwhw_semaphore_present; unsigned long io_base; uint32_t phy_id; uint32_t phy_revision; @@ -1388,6 +1478,7 @@ struct e1000_hw { boolean_t in_ifs_mode; boolean_t mng_reg_access_disabled; boolean_t leave_av_bit_off; + boolean_t kmrn_lock_loss_workaround_disabled; }; @@ -1436,6 +1527,7 @@ struct e1000_hw { #define E1000_CTRL_RTE 0x20000000 /* Routing tag enable */ #define E1000_CTRL_VME 0x40000000 /* IEEE VLAN mode enable */ #define E1000_CTRL_PHY_RST 0x80000000 /* PHY Reset */ +#define E1000_CTRL_SW2FW_INT 0x02000000 /* Initiate an interrupt to manageability engine */ /* Device Status */ #define E1000_STATUS_FD 0x00000001 /* Full duplex.0=half,1=full */ @@ -1450,6 +1542,8 @@ struct e1000_hw { #define E1000_STATUS_SPEED_10 0x00000000 /* Speed 10Mb/s */ #define E1000_STATUS_SPEED_100 0x00000040 /* Speed 100Mb/s */ #define E1000_STATUS_SPEED_1000 0x00000080 /* Speed 1000Mb/s */ +#define E1000_STATUS_LAN_INIT_DONE 0x00000200 /* Lan Init Completion + by EEPROM/Flash */ #define E1000_STATUS_ASDV 0x00000300 /* Auto speed detect value */ #define E1000_STATUS_DOCK_CI 0x00000800 /* Change in Dock/Undock state. Clear on write '0'. */ #define E1000_STATUS_GIO_MASTER_ENABLE 0x00080000 /* Status of Master requests. */ @@ -1507,6 +1601,10 @@ struct e1000_hw { #define E1000_STM_OPCODE 0xDB00 #define E1000_HICR_FW_RESET 0xC0 +#define E1000_SHADOW_RAM_WORDS 2048 +#define E1000_ICH8_NVM_SIG_WORD 0x13 +#define E1000_ICH8_NVM_SIG_MASK 0xC0 + /* EEPROM Read */ #define E1000_EERD_START 0x00000001 /* Start Read */ #define E1000_EERD_DONE 0x00000010 /* Read Done */ @@ -1552,7 +1650,6 @@ struct e1000_hw { #define E1000_CTRL_EXT_WR_WMARK_320 0x01000000 #define E1000_CTRL_EXT_WR_WMARK_384 0x02000000 #define E1000_CTRL_EXT_WR_WMARK_448 0x03000000 -#define E1000_CTRL_EXT_CANC 0x04000000 /* Interrupt delay cancellation */ #define E1000_CTRL_EXT_DRV_LOAD 0x10000000 /* Driver loaded bit for FW */ #define E1000_CTRL_EXT_IAME 0x08000000 /* Interrupt acknowledge Auto-mask */ #define E1000_CTRL_EXT_INT_TIMER_CLR 0x20000000 /* Clear Interrupt timers after IMS clear */ @@ -1592,12 +1689,31 @@ struct e1000_hw { #define E1000_KUMCTRLSTA_FIFO_CTRL_TX_BYPASS 0x00000800 /* In-Band Control */ +#define E1000_KUMCTRLSTA_INB_CTRL_LINK_STATUS_TX_TIMEOUT_DEFAULT 0x00000500 #define E1000_KUMCTRLSTA_INB_CTRL_DIS_PADDING 0x00000010 /* Half-Duplex Control */ #define E1000_KUMCTRLSTA_HD_CTRL_10_100_DEFAULT 0x00000004 #define E1000_KUMCTRLSTA_HD_CTRL_1000_DEFAULT 0x00000000 +#define E1000_KUMCTRLSTA_OFFSET_K0S_CTRL 0x0000001E + +#define E1000_KUMCTRLSTA_DIAG_FELPBK 0x2000 +#define E1000_KUMCTRLSTA_DIAG_NELPBK 0x1000 + +#define E1000_KUMCTRLSTA_K0S_100_EN 0x2000 +#define E1000_KUMCTRLSTA_K0S_GBE_EN 0x1000 +#define E1000_KUMCTRLSTA_K0S_ENTRY_LATENCY_MASK 0x0003 + +#define E1000_KABGTXD_BGSQLBIAS 0x00050000 + +#define E1000_PHY_CTRL_SPD_EN 0x00000001 +#define E1000_PHY_CTRL_D0A_LPLU 0x00000002 +#define E1000_PHY_CTRL_NOND0A_LPLU 0x00000004 +#define E1000_PHY_CTRL_NOND0A_GBE_DISABLE 0x00000008 +#define E1000_PHY_CTRL_GBE_DISABLE 0x00000040 +#define E1000_PHY_CTRL_B2B_EN 0x00000080 + /* LED Control */ #define E1000_LEDCTL_LED0_MODE_MASK 0x0000000F #define E1000_LEDCTL_LED0_MODE_SHIFT 0 @@ -1667,6 +1783,9 @@ struct e1000_hw { #define E1000_ICR_RXD_FIFO_PAR1 0x01000000 /* queue 1 Rx descriptor FIFO parity error */ #define E1000_ICR_TXD_FIFO_PAR1 0x02000000 /* queue 1 Tx descriptor FIFO parity error */ #define E1000_ICR_ALL_PARITY 0x03F00000 /* all parity error bits */ +#define E1000_ICR_DSW 0x00000020 /* FW changed the status of DISSW bit in the FWSM */ +#define E1000_ICR_PHYINT 0x00001000 /* LAN connected device generates an interrupt */ +#define E1000_ICR_EPRST 0x00100000 /* ME handware reset occurs */ /* Interrupt Cause Set */ #define E1000_ICS_TXDW E1000_ICR_TXDW /* Transmit desc written back */ @@ -1693,6 +1812,9 @@ struct e1000_hw { #define E1000_ICS_PB_PAR E1000_ICR_PB_PAR /* packet buffer parity error */ #define E1000_ICS_RXD_FIFO_PAR1 E1000_ICR_RXD_FIFO_PAR1 /* queue 1 Rx descriptor FIFO parity error */ #define E1000_ICS_TXD_FIFO_PAR1 E1000_ICR_TXD_FIFO_PAR1 /* queue 1 Tx descriptor FIFO parity error */ +#define E1000_ICS_DSW E1000_ICR_DSW +#define E1000_ICS_PHYINT E1000_ICR_PHYINT +#define E1000_ICS_EPRST E1000_ICR_EPRST /* Interrupt Mask Set */ #define E1000_IMS_TXDW E1000_ICR_TXDW /* Transmit desc written back */ @@ -1719,6 +1841,9 @@ struct e1000_hw { #define E1000_IMS_PB_PAR E1000_ICR_PB_PAR /* packet buffer parity error */ #define E1000_IMS_RXD_FIFO_PAR1 E1000_ICR_RXD_FIFO_PAR1 /* queue 1 Rx descriptor FIFO parity error */ #define E1000_IMS_TXD_FIFO_PAR1 E1000_ICR_TXD_FIFO_PAR1 /* queue 1 Tx descriptor FIFO parity error */ +#define E1000_IMS_DSW E1000_ICR_DSW +#define E1000_IMS_PHYINT E1000_ICR_PHYINT +#define E1000_IMS_EPRST E1000_ICR_EPRST /* Interrupt Mask Clear */ #define E1000_IMC_TXDW E1000_ICR_TXDW /* Transmit desc written back */ @@ -1745,6 +1870,9 @@ struct e1000_hw { #define E1000_IMC_PB_PAR E1000_ICR_PB_PAR /* packet buffer parity error */ #define E1000_IMC_RXD_FIFO_PAR1 E1000_ICR_RXD_FIFO_PAR1 /* queue 1 Rx descriptor FIFO parity error */ #define E1000_IMC_TXD_FIFO_PAR1 E1000_ICR_TXD_FIFO_PAR1 /* queue 1 Tx descriptor FIFO parity error */ +#define E1000_IMC_DSW E1000_ICR_DSW +#define E1000_IMC_PHYINT E1000_ICR_PHYINT +#define E1000_IMC_EPRST E1000_ICR_EPRST /* Receive Control */ #define E1000_RCTL_RST 0x00000001 /* Software reset */ @@ -1919,9 +2047,10 @@ struct e1000_hw { #define E1000_MRQC_RSS_FIELD_MASK 0xFFFF0000 #define E1000_MRQC_RSS_FIELD_IPV4_TCP 0x00010000 #define E1000_MRQC_RSS_FIELD_IPV4 0x00020000 -#define E1000_MRQC_RSS_FIELD_IPV6_TCP 0x00040000 +#define E1000_MRQC_RSS_FIELD_IPV6_TCP_EX 0x00040000 #define E1000_MRQC_RSS_FIELD_IPV6_EX 0x00080000 #define E1000_MRQC_RSS_FIELD_IPV6 0x00100000 +#define E1000_MRQC_RSS_FIELD_IPV6_TCP 0x00200000 /* Definitions for power management and wakeup registers */ /* Wake Up Control */ @@ -2011,6 +2140,15 @@ struct e1000_hw { #define E1000_FWSM_MODE_SHIFT 1 #define E1000_FWSM_FW_VALID 0x00008000 /* FW established a valid mode */ +#define E1000_FWSM_RSPCIPHY 0x00000040 /* Reset PHY on PCI reset */ +#define E1000_FWSM_DISSW 0x10000000 /* FW disable SW Write Access */ +#define E1000_FWSM_SKUSEL_MASK 0x60000000 /* LAN SKU select */ +#define E1000_FWSM_SKUEL_SHIFT 29 +#define E1000_FWSM_SKUSEL_EMB 0x0 /* Embedded SKU */ +#define E1000_FWSM_SKUSEL_CONS 0x1 /* Consumer SKU */ +#define E1000_FWSM_SKUSEL_PERF_100 0x2 /* Perf & Corp 10/100 SKU */ +#define E1000_FWSM_SKUSEL_PERF_GBE 0x3 /* Perf & Copr GbE SKU */ + /* FFLT Debug Register */ #define E1000_FFLT_DBG_INVC 0x00100000 /* Invalid /C/ code handling */ @@ -2083,6 +2221,8 @@ struct e1000_host_command_info { E1000_GCR_TXDSCW_NO_SNOOP | \ E1000_GCR_TXDSCR_NO_SNOOP) +#define PCI_EX_82566_SNOOP_ALL PCI_EX_NO_SNOOP_ALL + #define E1000_GCR_L1_ACT_WITHOUT_L0S_RX 0x08000000 /* Function Active and Power State to MNG */ #define E1000_FACTPS_FUNC0_POWER_STATE_MASK 0x00000003 @@ -2141,8 +2281,10 @@ struct e1000_host_command_info { #define EEPROM_PHY_CLASS_WORD 0x0007 #define EEPROM_INIT_CONTROL1_REG 0x000A #define EEPROM_INIT_CONTROL2_REG 0x000F +#define EEPROM_SWDEF_PINS_CTRL_PORT_1 0x0010 #define EEPROM_INIT_CONTROL3_PORT_B 0x0014 #define EEPROM_INIT_3GIO_3 0x001A +#define EEPROM_SWDEF_PINS_CTRL_PORT_0 0x0020 #define EEPROM_INIT_CONTROL3_PORT_A 0x0024 #define EEPROM_CFG 0x0012 #define EEPROM_FLASH_VERSION 0x0032 @@ -2154,10 +2296,16 @@ struct e1000_host_command_info { /* Word definitions for ID LED Settings */ #define ID_LED_RESERVED_0000 0x0000 #define ID_LED_RESERVED_FFFF 0xFFFF +#define ID_LED_RESERVED_82573 0xF746 +#define ID_LED_DEFAULT_82573 0x1811 #define ID_LED_DEFAULT ((ID_LED_OFF1_ON2 << 12) | \ (ID_LED_OFF1_OFF2 << 8) | \ (ID_LED_DEF1_DEF2 << 4) | \ (ID_LED_DEF1_DEF2)) +#define ID_LED_DEFAULT_ICH8LAN ((ID_LED_DEF1_DEF2 << 12) | \ + (ID_LED_DEF1_OFF2 << 8) | \ + (ID_LED_DEF1_ON2 << 4) | \ + (ID_LED_DEF1_DEF2)) #define ID_LED_DEF1_DEF2 0x1 #define ID_LED_DEF1_ON2 0x2 #define ID_LED_DEF1_OFF2 0x3 @@ -2192,6 +2340,11 @@ struct e1000_host_command_info { #define EEPROM_WORD0F_ASM_DIR 0x2000 #define EEPROM_WORD0F_ANE 0x0800 #define EEPROM_WORD0F_SWPDIO_EXT 0x00F0 +#define EEPROM_WORD0F_LPLU 0x0001 + +/* Mask bits for fields in Word 0x10/0x20 of the EEPROM */ +#define EEPROM_WORD1020_GIGA_DISABLE 0x0010 +#define EEPROM_WORD1020_GIGA_DISABLE_NON_D0A 0x0008 /* Mask bits for fields in Word 0x1a of the EEPROM */ #define EEPROM_WORD1A_ASPM_MASK 0x000C @@ -2266,23 +2419,29 @@ struct e1000_host_command_info { #define E1000_EXTCNF_CTRL_D_UD_OWNER 0x00000010 #define E1000_EXTCNF_CTRL_MDIO_SW_OWNERSHIP 0x00000020 #define E1000_EXTCNF_CTRL_MDIO_HW_OWNERSHIP 0x00000040 -#define E1000_EXTCNF_CTRL_EXT_CNF_POINTER 0x1FFF0000 +#define E1000_EXTCNF_CTRL_EXT_CNF_POINTER 0x0FFF0000 #define E1000_EXTCNF_SIZE_EXT_PHY_LENGTH 0x000000FF #define E1000_EXTCNF_SIZE_EXT_DOCK_LENGTH 0x0000FF00 #define E1000_EXTCNF_SIZE_EXT_PCIE_LENGTH 0x00FF0000 +#define E1000_EXTCNF_CTRL_LCD_WRITE_ENABLE 0x00000001 +#define E1000_EXTCNF_CTRL_SWFLAG 0x00000020 /* PBA constants */ +#define E1000_PBA_8K 0x0008 /* 8KB, default Rx allocation */ #define E1000_PBA_12K 0x000C /* 12KB, default Rx allocation */ #define E1000_PBA_16K 0x0010 /* 16KB, default TX allocation */ #define E1000_PBA_22K 0x0016 #define E1000_PBA_24K 0x0018 #define E1000_PBA_30K 0x001E #define E1000_PBA_32K 0x0020 +#define E1000_PBA_34K 0x0022 #define E1000_PBA_38K 0x0026 #define E1000_PBA_40K 0x0028 #define E1000_PBA_48K 0x0030 /* 48KB, default RX allocation */ +#define E1000_PBS_16K E1000_PBA_16K + /* Flow Control Constants */ #define FLOW_CONTROL_ADDRESS_LOW 0x00C28001 #define FLOW_CONTROL_ADDRESS_HIGH 0x00000100 @@ -2337,7 +2496,7 @@ struct e1000_host_command_info { /* Number of milliseconds we wait for Eeprom auto read bit done after MAC reset */ #define AUTO_READ_DONE_TIMEOUT 10 /* Number of milliseconds we wait for PHY configuration done after MAC reset */ -#define PHY_CFG_TIMEOUT 40 +#define PHY_CFG_TIMEOUT 100 #define E1000_TX_BUFFER_SIZE ((uint32_t)1514) @@ -3002,6 +3161,221 @@ struct e1000_host_command_info { #define L1LXT971A_PHY_ID 0x001378E0 #define GG82563_E_PHY_ID 0x01410CA0 + +/* Bits... + * 15-5: page + * 4-0: register offset + */ +#define PHY_PAGE_SHIFT 5 +#define PHY_REG(page, reg) \ + (((page) << PHY_PAGE_SHIFT) | ((reg) & MAX_PHY_REG_ADDRESS)) + +#define IGP3_PHY_PORT_CTRL \ + PHY_REG(769, 17) /* Port General Configuration */ +#define IGP3_PHY_RATE_ADAPT_CTRL \ + PHY_REG(769, 25) /* Rate Adapter Control Register */ + +#define IGP3_KMRN_FIFO_CTRL_STATS \ + PHY_REG(770, 16) /* KMRN FIFO's control/status register */ +#define IGP3_KMRN_POWER_MNG_CTRL \ + PHY_REG(770, 17) /* KMRN Power Management Control Register */ +#define IGP3_KMRN_INBAND_CTRL \ + PHY_REG(770, 18) /* KMRN Inband Control Register */ +#define IGP3_KMRN_DIAG \ + PHY_REG(770, 19) /* KMRN Diagnostic register */ +#define IGP3_KMRN_DIAG_PCS_LOCK_LOSS 0x0002 /* RX PCS is not synced */ +#define IGP3_KMRN_ACK_TIMEOUT \ + PHY_REG(770, 20) /* KMRN Acknowledge Timeouts register */ + +#define IGP3_VR_CTRL \ + PHY_REG(776, 18) /* Voltage regulator control register */ +#define IGP3_VR_CTRL_MODE_SHUT 0x0200 /* Enter powerdown, shutdown VRs */ + +#define IGP3_CAPABILITY \ + PHY_REG(776, 19) /* IGP3 Capability Register */ + +/* Capabilities for SKU Control */ +#define IGP3_CAP_INITIATE_TEAM 0x0001 /* Able to initiate a team */ +#define IGP3_CAP_WFM 0x0002 /* Support WoL and PXE */ +#define IGP3_CAP_ASF 0x0004 /* Support ASF */ +#define IGP3_CAP_LPLU 0x0008 /* Support Low Power Link Up */ +#define IGP3_CAP_DC_AUTO_SPEED 0x0010 /* Support AC/DC Auto Link Speed */ +#define IGP3_CAP_SPD 0x0020 /* Support Smart Power Down */ +#define IGP3_CAP_MULT_QUEUE 0x0040 /* Support 2 tx & 2 rx queues */ +#define IGP3_CAP_RSS 0x0080 /* Support RSS */ +#define IGP3_CAP_8021PQ 0x0100 /* Support 802.1Q & 802.1p */ +#define IGP3_CAP_AMT_CB 0x0200 /* Support active manageability and circuit breaker */ + +#define IGP3_PPC_JORDAN_EN 0x0001 +#define IGP3_PPC_JORDAN_GIGA_SPEED 0x0002 + +#define IGP3_KMRN_PMC_EE_IDLE_LINK_DIS 0x0001 +#define IGP3_KMRN_PMC_K0S_ENTRY_LATENCY_MASK 0x001E +#define IGP3_KMRN_PMC_K0S_MODE1_EN_GIGA 0x0020 +#define IGP3_KMRN_PMC_K0S_MODE1_EN_100 0x0040 + +#define IGP3E1000_PHY_MISC_CTRL 0x1B /* Misc. Ctrl register */ +#define IGP3_PHY_MISC_DUPLEX_MANUAL_SET 0x1000 /* Duplex Manual Set */ + +#define IGP3_KMRN_EXT_CTRL PHY_REG(770, 18) +#define IGP3_KMRN_EC_DIS_INBAND 0x0080 + +#define IGP03E1000_E_PHY_ID 0x02A80390 +#define IFE_E_PHY_ID 0x02A80330 /* 10/100 PHY */ +#define IFE_PLUS_E_PHY_ID 0x02A80320 +#define IFE_C_E_PHY_ID 0x02A80310 + +#define IFE_PHY_EXTENDED_STATUS_CONTROL 0x10 /* 100BaseTx Extended Status, Control and Address */ +#define IFE_PHY_SPECIAL_CONTROL 0x11 /* 100BaseTx PHY special control register */ +#define IFE_PHY_RCV_FALSE_CARRIER 0x13 /* 100BaseTx Receive False Carrier Counter */ +#define IFE_PHY_RCV_DISCONNECT 0x14 /* 100BaseTx Receive Disconnet Counter */ +#define IFE_PHY_RCV_ERROT_FRAME 0x15 /* 100BaseTx Receive Error Frame Counter */ +#define IFE_PHY_RCV_SYMBOL_ERR 0x16 /* Receive Symbol Error Counter */ +#define IFE_PHY_PREM_EOF_ERR 0x17 /* 100BaseTx Receive Premature End Of Frame Error Counter */ +#define IFE_PHY_RCV_EOF_ERR 0x18 /* 10BaseT Receive End Of Frame Error Counter */ +#define IFE_PHY_TX_JABBER_DETECT 0x19 /* 10BaseT Transmit Jabber Detect Counter */ +#define IFE_PHY_EQUALIZER 0x1A /* PHY Equalizer Control and Status */ +#define IFE_PHY_SPECIAL_CONTROL_LED 0x1B /* PHY special control and LED configuration */ +#define IFE_PHY_MDIX_CONTROL 0x1C /* MDI/MDI-X Control register */ +#define IFE_PHY_HWI_CONTROL 0x1D /* Hardware Integrity Control (HWI) */ + +#define IFE_PESC_REDUCED_POWER_DOWN_DISABLE 0x2000 /* Defaut 1 = Disable auto reduced power down */ +#define IFE_PESC_100BTX_POWER_DOWN 0x0400 /* Indicates the power state of 100BASE-TX */ +#define IFE_PESC_10BTX_POWER_DOWN 0x0200 /* Indicates the power state of 10BASE-T */ +#define IFE_PESC_POLARITY_REVERSED 0x0100 /* Indicates 10BASE-T polarity */ +#define IFE_PESC_PHY_ADDR_MASK 0x007C /* Bit 6:2 for sampled PHY address */ +#define IFE_PESC_SPEED 0x0002 /* Auto-negotiation speed result 1=100Mbs, 0=10Mbs */ +#define IFE_PESC_DUPLEX 0x0001 /* Auto-negotiation duplex result 1=Full, 0=Half */ +#define IFE_PESC_POLARITY_REVERSED_SHIFT 8 + +#define IFE_PSC_DISABLE_DYNAMIC_POWER_DOWN 0x0100 /* 1 = Dyanmic Power Down disabled */ +#define IFE_PSC_FORCE_POLARITY 0x0020 /* 1=Reversed Polarity, 0=Normal */ +#define IFE_PSC_AUTO_POLARITY_DISABLE 0x0010 /* 1=Auto Polarity Disabled, 0=Enabled */ +#define IFE_PSC_JABBER_FUNC_DISABLE 0x0001 /* 1=Jabber Disabled, 0=Normal Jabber Operation */ +#define IFE_PSC_FORCE_POLARITY_SHIFT 5 +#define IFE_PSC_AUTO_POLARITY_DISABLE_SHIFT 4 + +#define IFE_PMC_AUTO_MDIX 0x0080 /* 1=enable MDI/MDI-X feature, default 0=disabled */ +#define IFE_PMC_FORCE_MDIX 0x0040 /* 1=force MDIX-X, 0=force MDI */ +#define IFE_PMC_MDIX_STATUS 0x0020 /* 1=MDI-X, 0=MDI */ +#define IFE_PMC_AUTO_MDIX_COMPLETE 0x0010 /* Resolution algorthm is completed */ +#define IFE_PMC_MDIX_MODE_SHIFT 6 +#define IFE_PHC_MDIX_RESET_ALL_MASK 0x0000 /* Disable auto MDI-X */ + +#define IFE_PHC_HWI_ENABLE 0x8000 /* Enable the HWI feature */ +#define IFE_PHC_ABILITY_CHECK 0x4000 /* 1= Test Passed, 0=failed */ +#define IFE_PHC_TEST_EXEC 0x2000 /* PHY launch test pulses on the wire */ +#define IFE_PHC_HIGHZ 0x0200 /* 1 = Open Circuit */ +#define IFE_PHC_LOWZ 0x0400 /* 1 = Short Circuit */ +#define IFE_PHC_LOW_HIGH_Z_MASK 0x0600 /* Mask for indication type of problem on the line */ +#define IFE_PHC_DISTANCE_MASK 0x01FF /* Mask for distance to the cable problem, in 80cm granularity */ +#define IFE_PHC_RESET_ALL_MASK 0x0000 /* Disable HWI */ +#define IFE_PSCL_PROBE_MODE 0x0020 /* LED Probe mode */ +#define IFE_PSCL_PROBE_LEDS_OFF 0x0006 /* Force LEDs 0 and 2 off */ +#define IFE_PSCL_PROBE_LEDS_ON 0x0007 /* Force LEDs 0 and 2 on */ + +#define ICH8_FLASH_COMMAND_TIMEOUT 500 /* 500 ms , should be adjusted */ +#define ICH8_FLASH_CYCLE_REPEAT_COUNT 10 /* 10 cycles , should be adjusted */ +#define ICH8_FLASH_SEG_SIZE_256 256 +#define ICH8_FLASH_SEG_SIZE_4K 4096 +#define ICH8_FLASH_SEG_SIZE_64K 65536 + +#define ICH8_CYCLE_READ 0x0 +#define ICH8_CYCLE_RESERVED 0x1 +#define ICH8_CYCLE_WRITE 0x2 +#define ICH8_CYCLE_ERASE 0x3 + +#define ICH8_FLASH_GFPREG 0x0000 +#define ICH8_FLASH_HSFSTS 0x0004 +#define ICH8_FLASH_HSFCTL 0x0006 +#define ICH8_FLASH_FADDR 0x0008 +#define ICH8_FLASH_FDATA0 0x0010 +#define ICH8_FLASH_FRACC 0x0050 +#define ICH8_FLASH_FREG0 0x0054 +#define ICH8_FLASH_FREG1 0x0058 +#define ICH8_FLASH_FREG2 0x005C +#define ICH8_FLASH_FREG3 0x0060 +#define ICH8_FLASH_FPR0 0x0074 +#define ICH8_FLASH_FPR1 0x0078 +#define ICH8_FLASH_SSFSTS 0x0090 +#define ICH8_FLASH_SSFCTL 0x0092 +#define ICH8_FLASH_PREOP 0x0094 +#define ICH8_FLASH_OPTYPE 0x0096 +#define ICH8_FLASH_OPMENU 0x0098 + +#define ICH8_FLASH_REG_MAPSIZE 0x00A0 +#define ICH8_FLASH_SECTOR_SIZE 4096 +#define ICH8_GFPREG_BASE_MASK 0x1FFF +#define ICH8_FLASH_LINEAR_ADDR_MASK 0x00FFFFFF + +/* ICH8 GbE Flash Hardware Sequencing Flash Status Register bit breakdown */ +/* Offset 04h HSFSTS */ +union ich8_hws_flash_status { + struct ich8_hsfsts { +#ifdef E1000_BIG_ENDIAN + uint16_t reserved2 :6; + uint16_t fldesvalid :1; + uint16_t flockdn :1; + uint16_t flcdone :1; + uint16_t flcerr :1; + uint16_t dael :1; + uint16_t berasesz :2; + uint16_t flcinprog :1; + uint16_t reserved1 :2; +#else + uint16_t flcdone :1; /* bit 0 Flash Cycle Done */ + uint16_t flcerr :1; /* bit 1 Flash Cycle Error */ + uint16_t dael :1; /* bit 2 Direct Access error Log */ + uint16_t berasesz :2; /* bit 4:3 Block/Sector Erase Size */ + uint16_t flcinprog :1; /* bit 5 flash SPI cycle in Progress */ + uint16_t reserved1 :2; /* bit 13:6 Reserved */ + uint16_t reserved2 :6; /* bit 13:6 Reserved */ + uint16_t fldesvalid :1; /* bit 14 Flash Descriptor Valid */ + uint16_t flockdn :1; /* bit 15 Flash Configuration Lock-Down */ +#endif + } hsf_status; + uint16_t regval; +}; + +/* ICH8 GbE Flash Hardware Sequencing Flash control Register bit breakdown */ +/* Offset 06h FLCTL */ +union ich8_hws_flash_ctrl { + struct ich8_hsflctl { +#ifdef E1000_BIG_ENDIAN + uint16_t fldbcount :2; + uint16_t flockdn :6; + uint16_t flcgo :1; + uint16_t flcycle :2; + uint16_t reserved :5; +#else + uint16_t flcgo :1; /* 0 Flash Cycle Go */ + uint16_t flcycle :2; /* 2:1 Flash Cycle */ + uint16_t reserved :5; /* 7:3 Reserved */ + uint16_t fldbcount :2; /* 9:8 Flash Data Byte Count */ + uint16_t flockdn :6; /* 15:10 Reserved */ +#endif + } hsf_ctrl; + uint16_t regval; +}; + +/* ICH8 Flash Region Access Permissions */ +union ich8_hws_flash_regacc { + struct ich8_flracc { +#ifdef E1000_BIG_ENDIAN + uint32_t gmwag :8; + uint32_t gmrag :8; + uint32_t grwa :8; + uint32_t grra :8; +#else + uint32_t grra :8; /* 0:7 GbE region Read Access */ + uint32_t grwa :8; /* 8:15 GbE region Write Access */ + uint32_t gmrag :8; /* 23:16 GbE Master Read Access Grant */ + uint32_t gmwag :8; /* 31:24 GbE Master Write Access Grant */ +#endif + } hsf_flregacc; + uint16_t regval; +}; + /* Miscellaneous PHY bit definitions. */ #define PHY_PREAMBLE 0xFFFFFFFF #define PHY_SOF 0x01 diff --git a/drivers/net/e1000/e1000_osdep.h b/drivers/net/e1000/e1000_osdep.h index 048d052be29..2d3e8b06cab 100644 --- a/drivers/net/e1000/e1000_osdep.h +++ b/drivers/net/e1000/e1000_osdep.h @@ -127,4 +127,17 @@ typedef enum { #define E1000_WRITE_FLUSH(a) E1000_READ_REG(a, STATUS) +#define E1000_WRITE_ICH8_REG(a, reg, value) ( \ + writel((value), ((a)->flash_address + reg))) + +#define E1000_READ_ICH8_REG(a, reg) ( \ + readl((a)->flash_address + reg)) + +#define E1000_WRITE_ICH8_REG16(a, reg, value) ( \ + writew((value), ((a)->flash_address + reg))) + +#define E1000_READ_ICH8_REG16(a, reg) ( \ + readw((a)->flash_address + reg)) + + #endif /* _E1000_OSDEP_H_ */ -- cgit v1.2.3-70-g09d2 From cd94dd0b648ceb64ca5e41d9ccfa99c1e30e92ef Mon Sep 17 00:00:00 2001 From: Auke Kok Date: Tue, 27 Jun 2006 09:08:22 -0700 Subject: e1000: integrate ich8 support into driver This hooks up the ich8 structure into the driver itself. Signed-off-by: Jesse Brandeburg Signed-off-by: Auke Kok --- drivers/net/e1000/e1000.h | 1 + drivers/net/e1000/e1000_ethtool.c | 80 +++-- drivers/net/e1000/e1000_hw.c | 654 ++++++++++++++++++++++++++++++++------ drivers/net/e1000/e1000_main.c | 120 ++++++- 4 files changed, 725 insertions(+), 130 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/e1000/e1000.h b/drivers/net/e1000/e1000.h index dbdaa332cac..323a2683417 100644 --- a/drivers/net/e1000/e1000.h +++ b/drivers/net/e1000/e1000.h @@ -143,6 +143,7 @@ struct e1000_adapter; #define AUTO_ALL_MODES 0 #define E1000_EEPROM_82544_APM 0x0004 +#define E1000_EEPROM_ICH8_APME 0x0004 #define E1000_EEPROM_APME 0x0400 #ifndef E1000_MASTER_SLAVE diff --git a/drivers/net/e1000/e1000_ethtool.c b/drivers/net/e1000/e1000_ethtool.c index 06091553292..3a0b847fac3 100644 --- a/drivers/net/e1000/e1000_ethtool.c +++ b/drivers/net/e1000/e1000_ethtool.c @@ -109,7 +109,8 @@ e1000_get_settings(struct net_device *netdev, struct ethtool_cmd *ecmd) SUPPORTED_1000baseT_Full| SUPPORTED_Autoneg | SUPPORTED_TP); - + if (hw->phy_type == e1000_phy_ife) + ecmd->supported &= ~SUPPORTED_1000baseT_Full; ecmd->advertising = ADVERTISED_TP; if (hw->autoneg == 1) { @@ -573,6 +574,7 @@ e1000_get_drvinfo(struct net_device *netdev, case e1000_82572: case e1000_82573: case e1000_80003es2lan: + case e1000_ich8lan: sprintf(firmware_version, "%d.%d-%d", (eeprom_data & 0xF000) >> 12, (eeprom_data & 0x0FF0) >> 4, @@ -757,6 +759,7 @@ e1000_reg_test(struct e1000_adapter *adapter, uint64_t *data) toggle = 0x7FFFF3FF; break; case e1000_82573: + case e1000_ich8lan: toggle = 0x7FFFF033; break; default: @@ -776,11 +779,12 @@ e1000_reg_test(struct e1000_adapter *adapter, uint64_t *data) } /* restore previous status */ E1000_WRITE_REG(&adapter->hw, STATUS, before); - - REG_PATTERN_TEST(FCAL, 0xFFFFFFFF, 0xFFFFFFFF); - REG_PATTERN_TEST(FCAH, 0x0000FFFF, 0xFFFFFFFF); - REG_PATTERN_TEST(FCT, 0x0000FFFF, 0xFFFFFFFF); - REG_PATTERN_TEST(VET, 0x0000FFFF, 0xFFFFFFFF); + if (adapter->hw.mac_type != e1000_ich8lan) { + REG_PATTERN_TEST(FCAL, 0xFFFFFFFF, 0xFFFFFFFF); + REG_PATTERN_TEST(FCAH, 0x0000FFFF, 0xFFFFFFFF); + REG_PATTERN_TEST(FCT, 0x0000FFFF, 0xFFFFFFFF); + REG_PATTERN_TEST(VET, 0x0000FFFF, 0xFFFFFFFF); + } REG_PATTERN_TEST(RDTR, 0x0000FFFF, 0xFFFFFFFF); REG_PATTERN_TEST(RDBAH, 0xFFFFFFFF, 0xFFFFFFFF); REG_PATTERN_TEST(RDLEN, 0x000FFF80, 0x000FFFFF); @@ -793,20 +797,22 @@ e1000_reg_test(struct e1000_adapter *adapter, uint64_t *data) REG_PATTERN_TEST(TDLEN, 0x000FFF80, 0x000FFFFF); REG_SET_AND_CHECK(RCTL, 0xFFFFFFFF, 0x00000000); - REG_SET_AND_CHECK(RCTL, 0x06DFB3FE, 0x003FFFFB); + before = (adapter->hw.mac_type == e1000_ich8lan ? + 0x06C3B33E : 0x06DFB3FE); + REG_SET_AND_CHECK(RCTL, before, 0x003FFFFB); REG_SET_AND_CHECK(TCTL, 0xFFFFFFFF, 0x00000000); if (adapter->hw.mac_type >= e1000_82543) { - REG_SET_AND_CHECK(RCTL, 0x06DFB3FE, 0xFFFFFFFF); + REG_SET_AND_CHECK(RCTL, before, 0xFFFFFFFF); REG_PATTERN_TEST(RDBAL, 0xFFFFFFF0, 0xFFFFFFFF); - REG_PATTERN_TEST(TXCW, 0xC000FFFF, 0x0000FFFF); + if (adapter->hw.mac_type != e1000_ich8lan) + REG_PATTERN_TEST(TXCW, 0xC000FFFF, 0x0000FFFF); REG_PATTERN_TEST(TDBAL, 0xFFFFFFF0, 0xFFFFFFFF); REG_PATTERN_TEST(TIDV, 0x0000FFFF, 0x0000FFFF); - - for (i = 0; i < E1000_RAR_ENTRIES; i++) { - REG_PATTERN_TEST(RA + ((i << 1) << 2), 0xFFFFFFFF, - 0xFFFFFFFF); + value = (adapter->hw.mac_type == e1000_ich8lan ? + E1000_RAR_ENTRIES_ICH8LAN : E1000_RAR_ENTRIES); + for (i = 0; i < value; i++) { REG_PATTERN_TEST(RA + (((i << 1) + 1) << 2), 0x8003FFFF, 0xFFFFFFFF); } @@ -820,7 +826,9 @@ e1000_reg_test(struct e1000_adapter *adapter, uint64_t *data) } - for (i = 0; i < E1000_MC_TBL_SIZE; i++) + value = (adapter->hw.mac_type == e1000_ich8lan ? + E1000_MC_TBL_SIZE_ICH8LAN : E1000_MC_TBL_SIZE); + for (i = 0; i < value; i++) REG_PATTERN_TEST(MTA + (i << 2), 0xFFFFFFFF, 0xFFFFFFFF); *data = 0; @@ -892,6 +900,8 @@ e1000_intr_test(struct e1000_adapter *adapter, uint64_t *data) /* Test each interrupt */ for (; i < 10; i++) { + if (adapter->hw.mac_type == e1000_ich8lan && i == 8) + continue; /* Interrupt to test */ mask = 1 << i; @@ -1251,16 +1261,31 @@ e1000_integrated_phy_loopback(struct e1000_adapter *adapter) GG82563_PHY_KMRN_MODE_CTRL, 0x1CC); } - /* force 1000, set loopback */ - e1000_write_phy_reg(&adapter->hw, PHY_CTRL, 0x4140); - /* Now set up the MAC to the same speed/duplex as the PHY. */ ctrl_reg = E1000_READ_REG(&adapter->hw, CTRL); - ctrl_reg &= ~E1000_CTRL_SPD_SEL; /* Clear the speed sel bits */ - ctrl_reg |= (E1000_CTRL_FRCSPD | /* Set the Force Speed Bit */ - E1000_CTRL_FRCDPX | /* Set the Force Duplex Bit */ - E1000_CTRL_SPD_1000 |/* Force Speed to 1000 */ - E1000_CTRL_FD); /* Force Duplex to FULL */ + + if (adapter->hw.phy_type == e1000_phy_ife) { + /* force 100, set loopback */ + e1000_write_phy_reg(&adapter->hw, PHY_CTRL, 0x6100); + + /* Now set up the MAC to the same speed/duplex as the PHY. */ + ctrl_reg &= ~E1000_CTRL_SPD_SEL; /* Clear the speed sel bits */ + ctrl_reg |= (E1000_CTRL_FRCSPD | /* Set the Force Speed Bit */ + E1000_CTRL_FRCDPX | /* Set the Force Duplex Bit */ + E1000_CTRL_SPD_100 |/* Force Speed to 100 */ + E1000_CTRL_FD); /* Force Duplex to FULL */ + } else { + /* force 1000, set loopback */ + e1000_write_phy_reg(&adapter->hw, PHY_CTRL, 0x4140); + + /* Now set up the MAC to the same speed/duplex as the PHY. */ + ctrl_reg = E1000_READ_REG(&adapter->hw, CTRL); + ctrl_reg &= ~E1000_CTRL_SPD_SEL; /* Clear the speed sel bits */ + ctrl_reg |= (E1000_CTRL_FRCSPD | /* Set the Force Speed Bit */ + E1000_CTRL_FRCDPX | /* Set the Force Duplex Bit */ + E1000_CTRL_SPD_1000 |/* Force Speed to 1000 */ + E1000_CTRL_FD); /* Force Duplex to FULL */ + } if (adapter->hw.media_type == e1000_media_type_copper && adapter->hw.phy_type == e1000_phy_m88) { @@ -1320,6 +1345,7 @@ e1000_set_phy_loopback(struct e1000_adapter *adapter) case e1000_82572: case e1000_82573: case e1000_80003es2lan: + case e1000_ich8lan: return e1000_integrated_phy_loopback(adapter); break; @@ -1786,6 +1812,16 @@ e1000_phys_id(struct net_device *netdev, uint32_t data) mod_timer(&adapter->blink_timer, jiffies); msleep_interruptible(data * 1000); del_timer_sync(&adapter->blink_timer); + } else if (adapter->hw.phy_type == e1000_phy_ife) { + if (!adapter->blink_timer.function) { + init_timer(&adapter->blink_timer); + adapter->blink_timer.function = e1000_led_blink_callback; + adapter->blink_timer.data = (unsigned long) adapter; + } + mod_timer(&adapter->blink_timer, jiffies); + msleep_interruptible(data * 1000); + del_timer_sync(&adapter->blink_timer); + e1000_write_phy_reg(&(adapter->hw), IFE_PHY_SPECIAL_CONTROL_LED, 0); } else { e1000_blink_led_start(&adapter->hw); msleep_interruptible(data * 1000); diff --git a/drivers/net/e1000/e1000_hw.c b/drivers/net/e1000/e1000_hw.c index a3f5ccdfafc..583518ae49c 100644 --- a/drivers/net/e1000/e1000_hw.c +++ b/drivers/net/e1000/e1000_hw.c @@ -101,7 +101,8 @@ static void e1000_write_reg_io(struct e1000_hw *hw, uint32_t offset, #define E1000_WRITE_REG_IO(a, reg, val) \ e1000_write_reg_io((a), E1000_##reg, val) -static int32_t e1000_configure_kmrn_for_10_100(struct e1000_hw *hw); +static int32_t e1000_configure_kmrn_for_10_100(struct e1000_hw *hw, + uint16_t duplex); static int32_t e1000_configure_kmrn_for_1000(struct e1000_hw *hw); /* IGP cable length table */ @@ -156,6 +157,14 @@ e1000_set_phy_type(struct e1000_hw *hw) hw->phy_type = e1000_phy_igp; break; } + case IGP03E1000_E_PHY_ID: + hw->phy_type = e1000_phy_igp_3; + break; + case IFE_E_PHY_ID: + case IFE_PLUS_E_PHY_ID: + case IFE_C_E_PHY_ID: + hw->phy_type = e1000_phy_ife; + break; case GG82563_E_PHY_ID: if (hw->mac_type == e1000_80003es2lan) { hw->phy_type = e1000_phy_gg82563; @@ -332,6 +341,7 @@ e1000_set_mac_type(struct e1000_hw *hw) break; case E1000_DEV_ID_82541EI: case E1000_DEV_ID_82541EI_MOBILE: + case E1000_DEV_ID_82541ER_LOM: hw->mac_type = e1000_82541; break; case E1000_DEV_ID_82541ER: @@ -341,6 +351,7 @@ e1000_set_mac_type(struct e1000_hw *hw) hw->mac_type = e1000_82541_rev_2; break; case E1000_DEV_ID_82547EI: + case E1000_DEV_ID_82547EI_MOBILE: hw->mac_type = e1000_82547; break; case E1000_DEV_ID_82547GI: @@ -354,6 +365,7 @@ e1000_set_mac_type(struct e1000_hw *hw) case E1000_DEV_ID_82572EI_COPPER: case E1000_DEV_ID_82572EI_FIBER: case E1000_DEV_ID_82572EI_SERDES: + case E1000_DEV_ID_82572EI: hw->mac_type = e1000_82572; break; case E1000_DEV_ID_82573E: @@ -361,16 +373,29 @@ e1000_set_mac_type(struct e1000_hw *hw) case E1000_DEV_ID_82573L: hw->mac_type = e1000_82573; break; + case E1000_DEV_ID_80003ES2LAN_COPPER_SPT: + case E1000_DEV_ID_80003ES2LAN_SERDES_SPT: case E1000_DEV_ID_80003ES2LAN_COPPER_DPT: case E1000_DEV_ID_80003ES2LAN_SERDES_DPT: hw->mac_type = e1000_80003es2lan; break; + case E1000_DEV_ID_ICH8_IGP_M_AMT: + case E1000_DEV_ID_ICH8_IGP_AMT: + case E1000_DEV_ID_ICH8_IGP_C: + case E1000_DEV_ID_ICH8_IFE: + case E1000_DEV_ID_ICH8_IGP_M: + hw->mac_type = e1000_ich8lan; + break; default: /* Should never have loaded on this device */ return -E1000_ERR_MAC_TYPE; } switch(hw->mac_type) { + case e1000_ich8lan: + hw->swfwhw_semaphore_present = TRUE; + hw->asf_firmware_present = TRUE; + break; case e1000_80003es2lan: hw->swfw_sync_present = TRUE; /* fall through */ @@ -423,6 +448,7 @@ e1000_set_media_type(struct e1000_hw *hw) case e1000_82542_rev2_1: hw->media_type = e1000_media_type_fiber; break; + case e1000_ich8lan: case e1000_82573: /* The STATUS_TBIMODE bit is reserved or reused for the this * device. @@ -527,6 +553,14 @@ e1000_reset_hw(struct e1000_hw *hw) } while(timeout); } + /* Workaround for ICH8 bit corruption issue in FIFO memory */ + if (hw->mac_type == e1000_ich8lan) { + /* Set Tx and Rx buffer allocation to 8k apiece. */ + E1000_WRITE_REG(hw, PBA, E1000_PBA_8K); + /* Set Packet Buffer Size to 16k. */ + E1000_WRITE_REG(hw, PBS, E1000_PBS_16K); + } + /* Issue a global reset to the MAC. This will reset the chip's * transmit, receive, DMA, and link units. It will not effect * the current PCI configuration. The global reset bit is self- @@ -550,6 +584,20 @@ e1000_reset_hw(struct e1000_hw *hw) /* Reset is performed on a shadow of the control register */ E1000_WRITE_REG(hw, CTRL_DUP, (ctrl | E1000_CTRL_RST)); break; + case e1000_ich8lan: + if (!hw->phy_reset_disable && + e1000_check_phy_reset_block(hw) == E1000_SUCCESS) { + /* e1000_ich8lan PHY HW reset requires MAC CORE reset + * at the same time to make sure the interface between + * MAC and the external PHY is reset. + */ + ctrl |= E1000_CTRL_PHY_RST; + } + + e1000_get_software_flag(hw); + E1000_WRITE_REG(hw, CTRL, (ctrl | E1000_CTRL_RST)); + msec_delay(5); + break; default: E1000_WRITE_REG(hw, CTRL, (ctrl | E1000_CTRL_RST)); break; @@ -591,6 +639,7 @@ e1000_reset_hw(struct e1000_hw *hw) /* fall through */ case e1000_82571: case e1000_82572: + case e1000_ich8lan: case e1000_80003es2lan: ret_val = e1000_get_auto_rd_done(hw); if(ret_val) @@ -633,6 +682,12 @@ e1000_reset_hw(struct e1000_hw *hw) e1000_pci_set_mwi(hw); } + if (hw->mac_type == e1000_ich8lan) { + uint32_t kab = E1000_READ_REG(hw, KABGTXD); + kab |= E1000_KABGTXD_BGSQLBIAS; + E1000_WRITE_REG(hw, KABGTXD, kab); + } + return E1000_SUCCESS; } @@ -675,9 +730,12 @@ e1000_init_hw(struct e1000_hw *hw) /* Disabling VLAN filtering. */ DEBUGOUT("Initializing the IEEE VLAN\n"); - if (hw->mac_type < e1000_82545_rev_3) - E1000_WRITE_REG(hw, VET, 0); - e1000_clear_vfta(hw); + /* VET hardcoded to standard value and VFTA removed in ICH8 LAN */ + if (hw->mac_type != e1000_ich8lan) { + if (hw->mac_type < e1000_82545_rev_3) + E1000_WRITE_REG(hw, VET, 0); + e1000_clear_vfta(hw); + } /* For 82542 (rev 2.0), disable MWI and put the receiver into reset */ if(hw->mac_type == e1000_82542_rev2_0) { @@ -705,6 +763,8 @@ e1000_init_hw(struct e1000_hw *hw) /* Zero out the Multicast HASH table */ DEBUGOUT("Zeroing the MTA\n"); mta_size = E1000_MC_TBL_SIZE; + if (hw->mac_type == e1000_ich8lan) + mta_size = E1000_MC_TBL_SIZE_ICH8LAN; for(i = 0; i < mta_size; i++) { E1000_WRITE_REG_ARRAY(hw, MTA, i, 0); /* use write flush to prevent Memory Write Block (MWB) from @@ -748,6 +808,10 @@ e1000_init_hw(struct e1000_hw *hw) break; } + /* More time needed for PHY to initialize */ + if (hw->mac_type == e1000_ich8lan) + msec_delay(15); + /* Call a subroutine to configure the link and setup flow control. */ ret_val = e1000_setup_link(hw); @@ -761,6 +825,7 @@ e1000_init_hw(struct e1000_hw *hw) case e1000_82571: case e1000_82572: case e1000_82573: + case e1000_ich8lan: case e1000_80003es2lan: ctrl |= E1000_TXDCTL_COUNT_DESC; break; @@ -799,6 +864,7 @@ e1000_init_hw(struct e1000_hw *hw) /* Fall through */ case e1000_82571: case e1000_82572: + case e1000_ich8lan: ctrl = E1000_READ_REG(hw, TXDCTL1); ctrl = (ctrl & ~E1000_TXDCTL_WTHRESH) | E1000_TXDCTL_FULL_TX_DESC_WB; if(hw->mac_type >= e1000_82571) @@ -822,6 +888,11 @@ e1000_init_hw(struct e1000_hw *hw) */ e1000_clear_hw_cntrs(hw); + /* ICH8 No-snoop bits are opposite polarity. + * Set to snoop by default after reset. */ + if (hw->mac_type == e1000_ich8lan) + e1000_set_pci_ex_no_snoop(hw, PCI_EX_82566_SNOOP_ALL); + if (hw->device_id == E1000_DEV_ID_82546GB_QUAD_COPPER || hw->device_id == E1000_DEV_ID_82546GB_QUAD_COPPER_KSP3) { ctrl_ext = E1000_READ_REG(hw, CTRL_EXT); @@ -909,6 +980,7 @@ e1000_setup_link(struct e1000_hw *hw) */ if (hw->fc == e1000_fc_default) { switch (hw->mac_type) { + case e1000_ich8lan: case e1000_82573: hw->fc = e1000_fc_full; break; @@ -975,9 +1047,12 @@ e1000_setup_link(struct e1000_hw *hw) */ DEBUGOUT("Initializing the Flow Control address, type and timer regs\n"); - E1000_WRITE_REG(hw, FCAL, FLOW_CONTROL_ADDRESS_LOW); - E1000_WRITE_REG(hw, FCAH, FLOW_CONTROL_ADDRESS_HIGH); - E1000_WRITE_REG(hw, FCT, FLOW_CONTROL_TYPE); + /* FCAL/H and FCT are hardcoded to standard values in e1000_ich8lan. */ + if (hw->mac_type != e1000_ich8lan) { + E1000_WRITE_REG(hw, FCT, FLOW_CONTROL_TYPE); + E1000_WRITE_REG(hw, FCAH, FLOW_CONTROL_ADDRESS_HIGH); + E1000_WRITE_REG(hw, FCAL, FLOW_CONTROL_ADDRESS_LOW); + } E1000_WRITE_REG(hw, FCTTV, hw->fc_pause_time); @@ -1241,12 +1316,13 @@ e1000_copper_link_igp_setup(struct e1000_hw *hw) /* Wait 10ms for MAC to configure PHY from eeprom settings */ msec_delay(15); - + if (hw->mac_type != e1000_ich8lan) { /* Configure activity LED after PHY reset */ led_ctrl = E1000_READ_REG(hw, LEDCTL); led_ctrl &= IGP_ACTIVITY_LED_MASK; led_ctrl |= (IGP_ACTIVITY_LED_ENABLE | IGP_LED3_MODE); E1000_WRITE_REG(hw, LEDCTL, led_ctrl); + } /* disable lplu d3 during driver init */ ret_val = e1000_set_d3_lplu_state(hw, FALSE); @@ -1482,8 +1558,7 @@ e1000_copper_link_ggp_setup(struct e1000_hw *hw) if (ret_val) return ret_val; - /* Enable Pass False Carrier on the PHY */ - phy_data |= GG82563_KMCR_PASS_FALSE_CARRIER; + phy_data &= ~GG82563_KMCR_PASS_FALSE_CARRIER; ret_val = e1000_write_phy_reg(hw, GG82563_PHY_KMRN_MODE_CTRL, phy_data); @@ -1636,6 +1711,10 @@ e1000_copper_link_autoneg(struct e1000_hw *hw) if(hw->autoneg_advertised == 0) hw->autoneg_advertised = AUTONEG_ADVERTISE_SPEED_DEFAULT; + /* IFE phy only supports 10/100 */ + if (hw->phy_type == e1000_phy_ife) + hw->autoneg_advertised &= AUTONEG_ADVERTISE_10_100_ALL; + DEBUGOUT("Reconfiguring auto-neg advertisement params\n"); ret_val = e1000_phy_setup_autoneg(hw); if(ret_val) { @@ -1733,6 +1812,26 @@ e1000_setup_copper_link(struct e1000_hw *hw) DEBUGFUNC("e1000_setup_copper_link"); + switch (hw->mac_type) { + case e1000_80003es2lan: + case e1000_ich8lan: + /* Set the mac to wait the maximum time between each + * iteration and increase the max iterations when + * polling the phy; this fixes erroneous timeouts at 10Mbps. */ + ret_val = e1000_write_kmrn_reg(hw, GG82563_REG(0x34, 4), 0xFFFF); + if (ret_val) + return ret_val; + ret_val = e1000_read_kmrn_reg(hw, GG82563_REG(0x34, 9), ®_data); + if (ret_val) + return ret_val; + reg_data |= 0x3F; + ret_val = e1000_write_kmrn_reg(hw, GG82563_REG(0x34, 9), reg_data); + if (ret_val) + return ret_val; + default: + break; + } + /* Check if it is a valid PHY and set PHY mode if necessary. */ ret_val = e1000_copper_link_preconfig(hw); if(ret_val) @@ -1740,10 +1839,8 @@ e1000_setup_copper_link(struct e1000_hw *hw) switch (hw->mac_type) { case e1000_80003es2lan: - ret_val = e1000_read_kmrn_reg(hw, E1000_KUMCTRLSTA_OFFSET_INB_CTRL, - ®_data); - if (ret_val) - return ret_val; + /* Kumeran registers are written-only */ + reg_data = E1000_KUMCTRLSTA_INB_CTRL_LINK_STATUS_TX_TIMEOUT_DEFAULT; reg_data |= E1000_KUMCTRLSTA_INB_CTRL_DIS_PADDING; ret_val = e1000_write_kmrn_reg(hw, E1000_KUMCTRLSTA_OFFSET_INB_CTRL, reg_data); @@ -1755,6 +1852,7 @@ e1000_setup_copper_link(struct e1000_hw *hw) } if (hw->phy_type == e1000_phy_igp || + hw->phy_type == e1000_phy_igp_3 || hw->phy_type == e1000_phy_igp_2) { ret_val = e1000_copper_link_igp_setup(hw); if(ret_val) @@ -1819,7 +1917,7 @@ e1000_setup_copper_link(struct e1000_hw *hw) * hw - Struct containing variables accessed by shared code ******************************************************************************/ static int32_t -e1000_configure_kmrn_for_10_100(struct e1000_hw *hw) +e1000_configure_kmrn_for_10_100(struct e1000_hw *hw, uint16_t duplex) { int32_t ret_val = E1000_SUCCESS; uint32_t tipg; @@ -1839,6 +1937,18 @@ e1000_configure_kmrn_for_10_100(struct e1000_hw *hw) tipg |= DEFAULT_80003ES2LAN_TIPG_IPGT_10_100; E1000_WRITE_REG(hw, TIPG, tipg); + ret_val = e1000_read_phy_reg(hw, GG82563_PHY_KMRN_MODE_CTRL, ®_data); + + if (ret_val) + return ret_val; + + if (duplex == HALF_DUPLEX) + reg_data |= GG82563_KMCR_PASS_FALSE_CARRIER; + else + reg_data &= ~GG82563_KMCR_PASS_FALSE_CARRIER; + + ret_val = e1000_write_phy_reg(hw, GG82563_PHY_KMRN_MODE_CTRL, reg_data); + return ret_val; } @@ -1863,6 +1973,14 @@ e1000_configure_kmrn_for_1000(struct e1000_hw *hw) tipg |= DEFAULT_80003ES2LAN_TIPG_IPGT_1000; E1000_WRITE_REG(hw, TIPG, tipg); + ret_val = e1000_read_phy_reg(hw, GG82563_PHY_KMRN_MODE_CTRL, ®_data); + + if (ret_val) + return ret_val; + + reg_data &= ~GG82563_KMCR_PASS_FALSE_CARRIER; + ret_val = e1000_write_phy_reg(hw, GG82563_PHY_KMRN_MODE_CTRL, reg_data); + return ret_val; } @@ -1885,10 +2003,13 @@ e1000_phy_setup_autoneg(struct e1000_hw *hw) if(ret_val) return ret_val; - /* Read the MII 1000Base-T Control Register (Address 9). */ - ret_val = e1000_read_phy_reg(hw, PHY_1000T_CTRL, &mii_1000t_ctrl_reg); - if(ret_val) - return ret_val; + if (hw->phy_type != e1000_phy_ife) { + /* Read the MII 1000Base-T Control Register (Address 9). */ + ret_val = e1000_read_phy_reg(hw, PHY_1000T_CTRL, &mii_1000t_ctrl_reg); + if (ret_val) + return ret_val; + } else + mii_1000t_ctrl_reg=0; /* Need to parse both autoneg_advertised and fc and set up * the appropriate PHY registers. First we will parse for @@ -1939,6 +2060,9 @@ e1000_phy_setup_autoneg(struct e1000_hw *hw) if(hw->autoneg_advertised & ADVERTISE_1000_FULL) { DEBUGOUT("Advertise 1000mb Full duplex\n"); mii_1000t_ctrl_reg |= CR_1000T_FD_CAPS; + if (hw->phy_type == e1000_phy_ife) { + DEBUGOUT("e1000_phy_ife is a 10/100 PHY. Gigabit speed is not supported.\n"); + } } /* Check for a software override of the flow control settings, and @@ -2000,9 +2124,11 @@ e1000_phy_setup_autoneg(struct e1000_hw *hw) DEBUGOUT1("Auto-Neg Advertising %x\n", mii_autoneg_adv_reg); - ret_val = e1000_write_phy_reg(hw, PHY_1000T_CTRL, mii_1000t_ctrl_reg); - if(ret_val) - return ret_val; + if (hw->phy_type != e1000_phy_ife) { + ret_val = e1000_write_phy_reg(hw, PHY_1000T_CTRL, mii_1000t_ctrl_reg); + if (ret_val) + return ret_val; + } return E1000_SUCCESS; } @@ -2105,6 +2231,18 @@ e1000_phy_force_speed_duplex(struct e1000_hw *hw) /* Need to reset the PHY or these changes will be ignored */ mii_ctrl_reg |= MII_CR_RESET; + /* Disable MDI-X support for 10/100 */ + } else if (hw->phy_type == e1000_phy_ife) { + ret_val = e1000_read_phy_reg(hw, IFE_PHY_MDIX_CONTROL, &phy_data); + if (ret_val) + return ret_val; + + phy_data &= ~IFE_PMC_AUTO_MDIX; + phy_data &= ~IFE_PMC_FORCE_MDIX; + + ret_val = e1000_write_phy_reg(hw, IFE_PHY_MDIX_CONTROL, phy_data); + if (ret_val) + return ret_val; } else { /* Clear Auto-Crossover to force MDI manually. IGP requires MDI * forced whenever speed or duplex are forced. @@ -2909,7 +3047,13 @@ e1000_get_speed_and_duplex(struct e1000_hw *hw, if (*speed == SPEED_1000) ret_val = e1000_configure_kmrn_for_1000(hw); else - ret_val = e1000_configure_kmrn_for_10_100(hw); + ret_val = e1000_configure_kmrn_for_10_100(hw, *duplex); + if (ret_val) + return ret_val; + } + + if ((hw->phy_type == e1000_phy_igp_3) && (*speed == SPEED_1000)) { + ret_val = e1000_kumeran_lock_loss_workaround(hw); if (ret_val) return ret_val; } @@ -3099,6 +3243,9 @@ e1000_swfw_sync_acquire(struct e1000_hw *hw, uint16_t mask) DEBUGFUNC("e1000_swfw_sync_acquire"); + if (hw->swfwhw_semaphore_present) + return e1000_get_software_flag(hw); + if (!hw->swfw_sync_present) return e1000_get_hw_eeprom_semaphore(hw); @@ -3138,6 +3285,11 @@ e1000_swfw_sync_release(struct e1000_hw *hw, uint16_t mask) DEBUGFUNC("e1000_swfw_sync_release"); + if (hw->swfwhw_semaphore_present) { + e1000_release_software_flag(hw); + return; + } + if (!hw->swfw_sync_present) { e1000_put_hw_eeprom_semaphore(hw); return; @@ -3180,7 +3332,8 @@ e1000_read_phy_reg(struct e1000_hw *hw, if (e1000_swfw_sync_acquire(hw, swfw)) return -E1000_ERR_SWFW_SYNC; - if((hw->phy_type == e1000_phy_igp || + if ((hw->phy_type == e1000_phy_igp || + hw->phy_type == e1000_phy_igp_3 || hw->phy_type == e1000_phy_igp_2) && (reg_addr > MAX_PHY_MULTI_PAGE_REG)) { ret_val = e1000_write_phy_reg_ex(hw, IGP01E1000_PHY_PAGE_SELECT, @@ -3319,7 +3472,8 @@ e1000_write_phy_reg(struct e1000_hw *hw, if (e1000_swfw_sync_acquire(hw, swfw)) return -E1000_ERR_SWFW_SYNC; - if((hw->phy_type == e1000_phy_igp || + if ((hw->phy_type == e1000_phy_igp || + hw->phy_type == e1000_phy_igp_3 || hw->phy_type == e1000_phy_igp_2) && (reg_addr > MAX_PHY_MULTI_PAGE_REG)) { ret_val = e1000_write_phy_reg_ex(hw, IGP01E1000_PHY_PAGE_SELECT, @@ -3534,7 +3688,7 @@ e1000_phy_hw_reset(struct e1000_hw *hw) E1000_WRITE_FLUSH(hw); if (hw->mac_type >= e1000_82571) - msec_delay(10); + msec_delay_irq(10); e1000_swfw_sync_release(hw, swfw); } else { /* Read the Extended Device Control Register, assert the PHY_RESET_DIR @@ -3564,6 +3718,12 @@ e1000_phy_hw_reset(struct e1000_hw *hw) ret_val = e1000_get_phy_cfg_done(hw); e1000_release_software_semaphore(hw); + if ((hw->mac_type == e1000_ich8lan) && + (hw->phy_type == e1000_phy_igp_3)) { + ret_val = e1000_init_lcd_from_nvm(hw); + if (ret_val) + return ret_val; + } return ret_val; } @@ -3592,9 +3752,11 @@ e1000_phy_reset(struct e1000_hw *hw) case e1000_82541_rev_2: case e1000_82571: case e1000_82572: + case e1000_ich8lan: ret_val = e1000_phy_hw_reset(hw); if(ret_val) return ret_val; + break; default: ret_val = e1000_read_phy_reg(hw, PHY_CTRL, &phy_data); @@ -3742,8 +3904,8 @@ e1000_detect_gig_phy(struct e1000_hw *hw) /* The 82571 firmware may still be configuring the PHY. In this * case, we cannot access the PHY until the configuration is done. So * we explicitly set the PHY values. */ - if(hw->mac_type == e1000_82571 || - hw->mac_type == e1000_82572) { + if (hw->mac_type == e1000_82571 || + hw->mac_type == e1000_82572) { hw->phy_id = IGP01E1000_I_PHY_ID; hw->phy_type = e1000_phy_igp_2; return E1000_SUCCESS; @@ -3760,7 +3922,7 @@ e1000_detect_gig_phy(struct e1000_hw *hw) /* Read the PHY ID Registers to identify which PHY is onboard. */ ret_val = e1000_read_phy_reg(hw, PHY_ID1, &phy_id_high); - if(ret_val) + if (ret_val) return ret_val; hw->phy_id = (uint32_t) (phy_id_high << 16); @@ -3798,6 +3960,12 @@ e1000_detect_gig_phy(struct e1000_hw *hw) case e1000_80003es2lan: if (hw->phy_id == GG82563_E_PHY_ID) match = TRUE; break; + case e1000_ich8lan: + if (hw->phy_id == IGP03E1000_E_PHY_ID) match = TRUE; + if (hw->phy_id == IFE_E_PHY_ID) match = TRUE; + if (hw->phy_id == IFE_PLUS_E_PHY_ID) match = TRUE; + if (hw->phy_id == IFE_C_E_PHY_ID) match = TRUE; + break; default: DEBUGOUT1("Invalid MAC type %d\n", hw->mac_type); return -E1000_ERR_CONFIG; @@ -4074,9 +4242,12 @@ e1000_phy_get_info(struct e1000_hw *hw, return -E1000_ERR_CONFIG; } - if(hw->phy_type == e1000_phy_igp || + if (hw->phy_type == e1000_phy_igp || + hw->phy_type == e1000_phy_igp_3 || hw->phy_type == e1000_phy_igp_2) return e1000_phy_igp_get_info(hw, phy_info); + else if (hw->phy_type == e1000_phy_ife) + return e1000_phy_ife_get_info(hw, phy_info); else return e1000_phy_m88_get_info(hw, phy_info); } @@ -4225,6 +4396,35 @@ e1000_init_eeprom_params(struct e1000_hw *hw) eeprom->use_eerd = TRUE; eeprom->use_eewr = FALSE; break; + case e1000_ich8lan: + { + int32_t i = 0; + uint32_t flash_size = E1000_READ_ICH8_REG(hw, ICH8_FLASH_GFPREG); + + eeprom->type = e1000_eeprom_ich8; + eeprom->use_eerd = FALSE; + eeprom->use_eewr = FALSE; + eeprom->word_size = E1000_SHADOW_RAM_WORDS; + + /* Zero the shadow RAM structure. But don't load it from NVM + * so as to save time for driver init */ + if (hw->eeprom_shadow_ram != NULL) { + for (i = 0; i < E1000_SHADOW_RAM_WORDS; i++) { + hw->eeprom_shadow_ram[i].modified = FALSE; + hw->eeprom_shadow_ram[i].eeprom_word = 0xFFFF; + } + } + + hw->flash_base_addr = (flash_size & ICH8_GFPREG_BASE_MASK) * + ICH8_FLASH_SECTOR_SIZE; + + hw->flash_bank_size = ((flash_size >> 16) & ICH8_GFPREG_BASE_MASK) + 1; + hw->flash_bank_size -= (flash_size & ICH8_GFPREG_BASE_MASK); + hw->flash_bank_size *= ICH8_FLASH_SECTOR_SIZE; + hw->flash_bank_size /= 2 * sizeof(uint16_t); + + break; + } default: break; } @@ -4645,7 +4845,10 @@ e1000_read_eeprom(struct e1000_hw *hw, return ret_val; } - if(eeprom->type == e1000_eeprom_spi) { + if (eeprom->type == e1000_eeprom_ich8) + return e1000_read_eeprom_ich8(hw, offset, words, data); + + if (eeprom->type == e1000_eeprom_spi) { uint16_t word_in; uint8_t read_opcode = EEPROM_READ_OPCODE_SPI; @@ -4812,7 +5015,10 @@ e1000_is_onboard_nvm_eeprom(struct e1000_hw *hw) DEBUGFUNC("e1000_is_onboard_nvm_eeprom"); - if(hw->mac_type == e1000_82573) { + if (hw->mac_type == e1000_ich8lan) + return FALSE; + + if (hw->mac_type == e1000_82573) { eecd = E1000_READ_REG(hw, EECD); /* Isolate bits 15 & 16 */ @@ -4862,8 +5068,22 @@ e1000_validate_eeprom_checksum(struct e1000_hw *hw) } } - for(i = 0; i < (EEPROM_CHECKSUM_REG + 1); i++) { - if(e1000_read_eeprom(hw, i, 1, &eeprom_data) < 0) { + if (hw->mac_type == e1000_ich8lan) { + /* Drivers must allocate the shadow ram structure for the + * EEPROM checksum to be updated. Otherwise, this bit as well + * as the checksum must both be set correctly for this + * validation to pass. + */ + e1000_read_eeprom(hw, 0x19, 1, &eeprom_data); + if ((eeprom_data & 0x40) == 0) { + eeprom_data |= 0x40; + e1000_write_eeprom(hw, 0x19, 1, &eeprom_data); + e1000_update_eeprom_checksum(hw); + } + } + + for (i = 0; i < (EEPROM_CHECKSUM_REG + 1); i++) { + if (e1000_read_eeprom(hw, i, 1, &eeprom_data) < 0) { DEBUGOUT("EEPROM Read Error\n"); return -E1000_ERR_EEPROM; } @@ -4889,6 +5109,7 @@ e1000_validate_eeprom_checksum(struct e1000_hw *hw) int32_t e1000_update_eeprom_checksum(struct e1000_hw *hw) { + uint32_t ctrl_ext; uint16_t checksum = 0; uint16_t i, eeprom_data; @@ -4907,6 +5128,14 @@ e1000_update_eeprom_checksum(struct e1000_hw *hw) return -E1000_ERR_EEPROM; } else if (hw->eeprom.type == e1000_eeprom_flash) { e1000_commit_shadow_ram(hw); + } else if (hw->eeprom.type == e1000_eeprom_ich8) { + e1000_commit_shadow_ram(hw); + /* Reload the EEPROM, or else modifications will not appear + * until after next adapter reset. */ + ctrl_ext = E1000_READ_REG(hw, CTRL_EXT); + ctrl_ext |= E1000_CTRL_EXT_EE_RST; + E1000_WRITE_REG(hw, CTRL_EXT, ctrl_ext); + msec_delay(10); } return E1000_SUCCESS; } @@ -4946,6 +5175,9 @@ e1000_write_eeprom(struct e1000_hw *hw, if(eeprom->use_eewr == TRUE) return e1000_write_eeprom_eewr(hw, offset, words, data); + if (eeprom->type == e1000_eeprom_ich8) + return e1000_write_eeprom_ich8(hw, offset, words, data); + /* Prepare the EEPROM for writing */ if (e1000_acquire_eeprom(hw) != E1000_SUCCESS) return -E1000_ERR_EEPROM; @@ -5133,11 +5365,17 @@ e1000_commit_shadow_ram(struct e1000_hw *hw) uint32_t flop = 0; uint32_t i = 0; int32_t error = E1000_SUCCESS; - - /* The flop register will be used to determine if flash type is STM */ - flop = E1000_READ_REG(hw, FLOP); + uint32_t old_bank_offset = 0; + uint32_t new_bank_offset = 0; + uint32_t sector_retries = 0; + uint8_t low_byte = 0; + uint8_t high_byte = 0; + uint8_t temp_byte = 0; + boolean_t sector_write_failed = FALSE; if (hw->mac_type == e1000_82573) { + /* The flop register will be used to determine if flash type is STM */ + flop = E1000_READ_REG(hw, FLOP); for (i=0; i < attempts; i++) { eecd = E1000_READ_REG(hw, EECD); if ((eecd & E1000_EECD_FLUPD) == 0) { @@ -5171,6 +5409,106 @@ e1000_commit_shadow_ram(struct e1000_hw *hw) } } + if (hw->mac_type == e1000_ich8lan && hw->eeprom_shadow_ram != NULL) { + /* We're writing to the opposite bank so if we're on bank 1, + * write to bank 0 etc. We also need to erase the segment that + * is going to be written */ + if (!(E1000_READ_REG(hw, EECD) & E1000_EECD_SEC1VAL)) { + new_bank_offset = hw->flash_bank_size * 2; + old_bank_offset = 0; + e1000_erase_ich8_4k_segment(hw, 1); + } else { + old_bank_offset = hw->flash_bank_size * 2; + new_bank_offset = 0; + e1000_erase_ich8_4k_segment(hw, 0); + } + + do { + sector_write_failed = FALSE; + /* Loop for every byte in the shadow RAM, + * which is in units of words. */ + for (i = 0; i < E1000_SHADOW_RAM_WORDS; i++) { + /* Determine whether to write the value stored + * in the other NVM bank or a modified value stored + * in the shadow RAM */ + if (hw->eeprom_shadow_ram[i].modified == TRUE) { + low_byte = (uint8_t)hw->eeprom_shadow_ram[i].eeprom_word; + e1000_read_ich8_byte(hw, (i << 1) + old_bank_offset, + &temp_byte); + udelay(100); + error = e1000_verify_write_ich8_byte(hw, + (i << 1) + new_bank_offset, + low_byte); + if (error != E1000_SUCCESS) + sector_write_failed = TRUE; + high_byte = + (uint8_t)(hw->eeprom_shadow_ram[i].eeprom_word >> 8); + e1000_read_ich8_byte(hw, (i << 1) + old_bank_offset + 1, + &temp_byte); + udelay(100); + } else { + e1000_read_ich8_byte(hw, (i << 1) + old_bank_offset, + &low_byte); + udelay(100); + error = e1000_verify_write_ich8_byte(hw, + (i << 1) + new_bank_offset, low_byte); + if (error != E1000_SUCCESS) + sector_write_failed = TRUE; + e1000_read_ich8_byte(hw, (i << 1) + old_bank_offset + 1, + &high_byte); + } + + /* If the word is 0x13, then make sure the signature bits + * (15:14) are 11b until the commit has completed. + * This will allow us to write 10b which indicates the + * signature is valid. We want to do this after the write + * has completed so that we don't mark the segment valid + * while the write is still in progress */ + if (i == E1000_ICH8_NVM_SIG_WORD) + high_byte = E1000_ICH8_NVM_SIG_MASK | high_byte; + + error = e1000_verify_write_ich8_byte(hw, + (i << 1) + new_bank_offset + 1, high_byte); + if (error != E1000_SUCCESS) + sector_write_failed = TRUE; + + if (sector_write_failed == FALSE) { + /* Clear the now not used entry in the cache */ + hw->eeprom_shadow_ram[i].modified = FALSE; + hw->eeprom_shadow_ram[i].eeprom_word = 0xFFFF; + } + } + + /* Don't bother writing the segment valid bits if sector + * programming failed. */ + if (sector_write_failed == FALSE) { + /* Finally validate the new segment by setting bit 15:14 + * to 10b in word 0x13 , this can be done without an + * erase as well since these bits are 11 to start with + * and we need to change bit 14 to 0b */ + e1000_read_ich8_byte(hw, + E1000_ICH8_NVM_SIG_WORD * 2 + 1 + new_bank_offset, + &high_byte); + high_byte &= 0xBF; + error = e1000_verify_write_ich8_byte(hw, + E1000_ICH8_NVM_SIG_WORD * 2 + 1 + new_bank_offset, + high_byte); + if (error != E1000_SUCCESS) + sector_write_failed = TRUE; + + /* And invalidate the previously valid segment by setting + * its signature word (0x13) high_byte to 0b. This can be + * done without an erase because flash erase sets all bits + * to 1's. We can write 1's to 0's without an erase */ + error = e1000_verify_write_ich8_byte(hw, + E1000_ICH8_NVM_SIG_WORD * 2 + 1 + old_bank_offset, + 0); + if (error != E1000_SUCCESS) + sector_write_failed = TRUE; + } + } while (++sector_retries < 10 && sector_write_failed == TRUE); + } + return error; } @@ -5278,6 +5616,9 @@ e1000_init_rx_addrs(struct e1000_hw *hw) * the other port. */ if ((hw->mac_type == e1000_82571) && (hw->laa_is_present == TRUE)) rar_num -= 1; + if (hw->mac_type == e1000_ich8lan) + rar_num = E1000_RAR_ENTRIES_ICH8LAN; + /* Zero out the other 15 receive addresses. */ DEBUGOUT("Clearing RAR[1-15]\n"); for(i = 1; i < rar_num; i++) { @@ -5288,7 +5629,6 @@ e1000_init_rx_addrs(struct e1000_hw *hw) } } -#if 0 /****************************************************************************** * Updates the MAC's list of multicast addresses. * @@ -5323,6 +5663,8 @@ e1000_mc_addr_list_update(struct e1000_hw *hw, /* Clear RAR[1-15] */ DEBUGOUT(" Clearing RAR[1-15]\n"); num_rar_entry = E1000_RAR_ENTRIES; + if (hw->mac_type == e1000_ich8lan) + num_rar_entry = E1000_RAR_ENTRIES_ICH8LAN; /* Reserve a spot for the Locally Administered Address to work around * an 82571 issue in which a reset on one port will reload the MAC on * the other port. */ @@ -5339,6 +5681,8 @@ e1000_mc_addr_list_update(struct e1000_hw *hw, /* Clear the MTA */ DEBUGOUT(" Clearing MTA\n"); num_mta_entry = E1000_NUM_MTA_REGISTERS; + if (hw->mac_type == e1000_ich8lan) + num_mta_entry = E1000_NUM_MTA_REGISTERS_ICH8LAN; for(i = 0; i < num_mta_entry; i++) { E1000_WRITE_REG_ARRAY(hw, MTA, i, 0); E1000_WRITE_FLUSH(hw); @@ -5375,7 +5719,6 @@ e1000_mc_addr_list_update(struct e1000_hw *hw, } DEBUGOUT("MC Update Complete\n"); } -#endif /* 0 */ /****************************************************************************** * Hashes an address to determine its location in the multicast table @@ -5398,24 +5741,46 @@ e1000_hash_mc_addr(struct e1000_hw *hw, * LSB MSB */ case 0: - /* [47:36] i.e. 0x563 for above example address */ - hash_value = ((mc_addr[4] >> 4) | (((uint16_t) mc_addr[5]) << 4)); + if (hw->mac_type == e1000_ich8lan) { + /* [47:38] i.e. 0x158 for above example address */ + hash_value = ((mc_addr[4] >> 6) | (((uint16_t) mc_addr[5]) << 2)); + } else { + /* [47:36] i.e. 0x563 for above example address */ + hash_value = ((mc_addr[4] >> 4) | (((uint16_t) mc_addr[5]) << 4)); + } break; case 1: - /* [46:35] i.e. 0xAC6 for above example address */ - hash_value = ((mc_addr[4] >> 3) | (((uint16_t) mc_addr[5]) << 5)); + if (hw->mac_type == e1000_ich8lan) { + /* [46:37] i.e. 0x2B1 for above example address */ + hash_value = ((mc_addr[4] >> 5) | (((uint16_t) mc_addr[5]) << 3)); + } else { + /* [46:35] i.e. 0xAC6 for above example address */ + hash_value = ((mc_addr[4] >> 3) | (((uint16_t) mc_addr[5]) << 5)); + } break; case 2: - /* [45:34] i.e. 0x5D8 for above example address */ - hash_value = ((mc_addr[4] >> 2) | (((uint16_t) mc_addr[5]) << 6)); + if (hw->mac_type == e1000_ich8lan) { + /*[45:36] i.e. 0x163 for above example address */ + hash_value = ((mc_addr[4] >> 4) | (((uint16_t) mc_addr[5]) << 4)); + } else { + /* [45:34] i.e. 0x5D8 for above example address */ + hash_value = ((mc_addr[4] >> 2) | (((uint16_t) mc_addr[5]) << 6)); + } break; case 3: - /* [43:32] i.e. 0x634 for above example address */ - hash_value = ((mc_addr[4]) | (((uint16_t) mc_addr[5]) << 8)); + if (hw->mac_type == e1000_ich8lan) { + /* [43:34] i.e. 0x18D for above example address */ + hash_value = ((mc_addr[4] >> 2) | (((uint16_t) mc_addr[5]) << 6)); + } else { + /* [43:32] i.e. 0x634 for above example address */ + hash_value = ((mc_addr[4]) | (((uint16_t) mc_addr[5]) << 8)); + } break; } hash_value &= 0xFFF; + if (hw->mac_type == e1000_ich8lan) + hash_value &= 0x3FF; return hash_value; } @@ -5443,6 +5808,8 @@ e1000_mta_set(struct e1000_hw *hw, * register are determined by the lower 5 bits of the value. */ hash_reg = (hash_value >> 5) & 0x7F; + if (hw->mac_type == e1000_ich8lan) + hash_reg &= 0x1F; hash_bit = hash_value & 0x1F; mta = E1000_READ_REG_ARRAY(hw, MTA, hash_reg); @@ -5537,7 +5904,10 @@ e1000_write_vfta(struct e1000_hw *hw, { uint32_t temp; - if((hw->mac_type == e1000_82544) && ((offset & 0x1) == 1)) { + if (hw->mac_type == e1000_ich8lan) + return; + + if ((hw->mac_type == e1000_82544) && ((offset & 0x1) == 1)) { temp = E1000_READ_REG_ARRAY(hw, VFTA, (offset - 1)); E1000_WRITE_REG_ARRAY(hw, VFTA, offset, value); E1000_WRITE_FLUSH(hw); @@ -5562,6 +5932,9 @@ e1000_clear_vfta(struct e1000_hw *hw) uint32_t vfta_offset = 0; uint32_t vfta_bit_in_reg = 0; + if (hw->mac_type == e1000_ich8lan) + return; + if (hw->mac_type == e1000_82573) { if (hw->mng_cookie.vlan_id != 0) { /* The VFTA is a 4096b bit-field, each identifying a single VLAN @@ -5611,9 +5984,18 @@ e1000_id_led_init(struct e1000_hw * hw) DEBUGOUT("EEPROM Read Error\n"); return -E1000_ERR_EEPROM; } - if((eeprom_data== ID_LED_RESERVED_0000) || - (eeprom_data == ID_LED_RESERVED_FFFF)) eeprom_data = ID_LED_DEFAULT; - for(i = 0; i < 4; i++) { + + if ((hw->mac_type == e1000_82573) && + (eeprom_data == ID_LED_RESERVED_82573)) + eeprom_data = ID_LED_DEFAULT_82573; + else if ((eeprom_data == ID_LED_RESERVED_0000) || + (eeprom_data == ID_LED_RESERVED_FFFF)) { + if (hw->mac_type == e1000_ich8lan) + eeprom_data = ID_LED_DEFAULT_ICH8LAN; + else + eeprom_data = ID_LED_DEFAULT; + } + for (i = 0; i < 4; i++) { temp = (eeprom_data >> (i << 2)) & led_mask; switch(temp) { case ID_LED_ON1_DEF2: @@ -5776,6 +6158,10 @@ e1000_cleanup_led(struct e1000_hw *hw) return ret_val; /* Fall Through */ default: + if (hw->phy_type == e1000_phy_ife) { + e1000_write_phy_reg(hw, IFE_PHY_SPECIAL_CONTROL_LED, 0); + break; + } /* Restore LEDCTL settings */ E1000_WRITE_REG(hw, LEDCTL, hw->ledctl_default); break; @@ -5820,7 +6206,10 @@ e1000_led_on(struct e1000_hw *hw) /* Clear SW Defineable Pin 0 to turn on the LED */ ctrl &= ~E1000_CTRL_SWDPIN0; ctrl |= E1000_CTRL_SWDPIO0; - } else if(hw->media_type == e1000_media_type_copper) { + } else if (hw->phy_type == e1000_phy_ife) { + e1000_write_phy_reg(hw, IFE_PHY_SPECIAL_CONTROL_LED, + (IFE_PSCL_PROBE_MODE | IFE_PSCL_PROBE_LEDS_ON)); + } else if (hw->media_type == e1000_media_type_copper) { E1000_WRITE_REG(hw, LEDCTL, hw->ledctl_mode2); return E1000_SUCCESS; } @@ -5868,7 +6257,10 @@ e1000_led_off(struct e1000_hw *hw) /* Set SW Defineable Pin 0 to turn off the LED */ ctrl |= E1000_CTRL_SWDPIN0; ctrl |= E1000_CTRL_SWDPIO0; - } else if(hw->media_type == e1000_media_type_copper) { + } else if (hw->phy_type == e1000_phy_ife) { + e1000_write_phy_reg(hw, IFE_PHY_SPECIAL_CONTROL_LED, + (IFE_PSCL_PROBE_MODE | IFE_PSCL_PROBE_LEDS_OFF)); + } else if (hw->media_type == e1000_media_type_copper) { E1000_WRITE_REG(hw, LEDCTL, hw->ledctl_mode1); return E1000_SUCCESS; } @@ -5906,12 +6298,16 @@ e1000_clear_hw_cntrs(struct e1000_hw *hw) temp = E1000_READ_REG(hw, XOFFRXC); temp = E1000_READ_REG(hw, XOFFTXC); temp = E1000_READ_REG(hw, FCRUC); + + if (hw->mac_type != e1000_ich8lan) { temp = E1000_READ_REG(hw, PRC64); temp = E1000_READ_REG(hw, PRC127); temp = E1000_READ_REG(hw, PRC255); temp = E1000_READ_REG(hw, PRC511); temp = E1000_READ_REG(hw, PRC1023); temp = E1000_READ_REG(hw, PRC1522); + } + temp = E1000_READ_REG(hw, GPRC); temp = E1000_READ_REG(hw, BPRC); temp = E1000_READ_REG(hw, MPRC); @@ -5931,12 +6327,16 @@ e1000_clear_hw_cntrs(struct e1000_hw *hw) temp = E1000_READ_REG(hw, TOTH); temp = E1000_READ_REG(hw, TPR); temp = E1000_READ_REG(hw, TPT); + + if (hw->mac_type != e1000_ich8lan) { temp = E1000_READ_REG(hw, PTC64); temp = E1000_READ_REG(hw, PTC127); temp = E1000_READ_REG(hw, PTC255); temp = E1000_READ_REG(hw, PTC511); temp = E1000_READ_REG(hw, PTC1023); temp = E1000_READ_REG(hw, PTC1522); + } + temp = E1000_READ_REG(hw, MPTC); temp = E1000_READ_REG(hw, BPTC); @@ -5959,6 +6359,9 @@ e1000_clear_hw_cntrs(struct e1000_hw *hw) temp = E1000_READ_REG(hw, IAC); temp = E1000_READ_REG(hw, ICRXOC); + + if (hw->mac_type == e1000_ich8lan) return; + temp = E1000_READ_REG(hw, ICRXPTC); temp = E1000_READ_REG(hw, ICRXATC); temp = E1000_READ_REG(hw, ICTXPTC); @@ -6139,6 +6542,7 @@ e1000_get_bus_info(struct e1000_hw *hw) hw->bus_width = e1000_bus_width_pciex_1; break; case e1000_82571: + case e1000_ich8lan: case e1000_80003es2lan: hw->bus_type = e1000_bus_type_pci_express; hw->bus_speed = e1000_bus_speed_2500; @@ -6176,8 +6580,6 @@ e1000_get_bus_info(struct e1000_hw *hw) break; } } - -#if 0 /****************************************************************************** * Reads a value from one of the devices registers using port I/O (as opposed * memory mapped I/O). Only 82544 and newer devices support port I/O. @@ -6195,7 +6597,6 @@ e1000_read_reg_io(struct e1000_hw *hw, e1000_io_write(hw, io_addr, offset); return e1000_io_read(hw, io_data); } -#endif /* 0 */ /****************************************************************************** * Writes a value to one of the devices registers using port I/O (as opposed to @@ -6240,8 +6641,6 @@ e1000_get_cable_length(struct e1000_hw *hw, { int32_t ret_val; uint16_t agc_value = 0; - uint16_t cur_agc, min_agc = IGP01E1000_AGC_LENGTH_TABLE_SIZE; - uint16_t max_agc = 0; uint16_t i, phy_data; uint16_t cable_length; @@ -6314,6 +6713,8 @@ e1000_get_cable_length(struct e1000_hw *hw, break; } } else if(hw->phy_type == e1000_phy_igp) { /* For IGP PHY */ + uint16_t cur_agc_value; + uint16_t min_agc_value = IGP01E1000_AGC_LENGTH_TABLE_SIZE; uint16_t agc_reg_array[IGP01E1000_PHY_CHANNEL_NUM] = {IGP01E1000_PHY_AGC_A, IGP01E1000_PHY_AGC_B, @@ -6326,23 +6727,23 @@ e1000_get_cable_length(struct e1000_hw *hw, if(ret_val) return ret_val; - cur_agc = phy_data >> IGP01E1000_AGC_LENGTH_SHIFT; + cur_agc_value = phy_data >> IGP01E1000_AGC_LENGTH_SHIFT; - /* Array bound check. */ - if((cur_agc >= IGP01E1000_AGC_LENGTH_TABLE_SIZE - 1) || - (cur_agc == 0)) + /* Value bound check. */ + if ((cur_agc_value >= IGP01E1000_AGC_LENGTH_TABLE_SIZE - 1) || + (cur_agc_value == 0)) return -E1000_ERR_PHY; - agc_value += cur_agc; + agc_value += cur_agc_value; /* Update minimal AGC value. */ - if(min_agc > cur_agc) - min_agc = cur_agc; + if (min_agc_value > cur_agc_value) + min_agc_value = cur_agc_value; } /* Remove the minimal AGC result for length < 50m */ - if(agc_value < IGP01E1000_PHY_CHANNEL_NUM * e1000_igp_cable_length_50) { - agc_value -= min_agc; + if (agc_value < IGP01E1000_PHY_CHANNEL_NUM * e1000_igp_cable_length_50) { + agc_value -= min_agc_value; /* Get the average length of the remaining 3 channels */ agc_value /= (IGP01E1000_PHY_CHANNEL_NUM - 1); @@ -6358,7 +6759,10 @@ e1000_get_cable_length(struct e1000_hw *hw, IGP01E1000_AGC_RANGE) : 0; *max_length = e1000_igp_cable_length_table[agc_value] + IGP01E1000_AGC_RANGE; - } else if (hw->phy_type == e1000_phy_igp_2) { + } else if (hw->phy_type == e1000_phy_igp_2 || + hw->phy_type == e1000_phy_igp_3) { + uint16_t cur_agc_index, max_agc_index = 0; + uint16_t min_agc_index = IGP02E1000_AGC_LENGTH_TABLE_SIZE - 1; uint16_t agc_reg_array[IGP02E1000_PHY_CHANNEL_NUM] = {IGP02E1000_PHY_AGC_A, IGP02E1000_PHY_AGC_B, @@ -6373,19 +6777,27 @@ e1000_get_cable_length(struct e1000_hw *hw, /* Getting bits 15:9, which represent the combination of course and * fine gain values. The result is a number that can be put into * the lookup table to obtain the approximate cable length. */ - cur_agc = (phy_data >> IGP02E1000_AGC_LENGTH_SHIFT) & - IGP02E1000_AGC_LENGTH_MASK; + cur_agc_index = (phy_data >> IGP02E1000_AGC_LENGTH_SHIFT) & + IGP02E1000_AGC_LENGTH_MASK; + + /* Array index bound check. */ + if ((cur_agc_index >= IGP02E1000_AGC_LENGTH_TABLE_SIZE) || + (cur_agc_index == 0)) + return -E1000_ERR_PHY; /* Remove min & max AGC values from calculation. */ - if (e1000_igp_2_cable_length_table[min_agc] > e1000_igp_2_cable_length_table[cur_agc]) - min_agc = cur_agc; - if (e1000_igp_2_cable_length_table[max_agc] < e1000_igp_2_cable_length_table[cur_agc]) - max_agc = cur_agc; + if (e1000_igp_2_cable_length_table[min_agc_index] > + e1000_igp_2_cable_length_table[cur_agc_index]) + min_agc_index = cur_agc_index; + if (e1000_igp_2_cable_length_table[max_agc_index] < + e1000_igp_2_cable_length_table[cur_agc_index]) + max_agc_index = cur_agc_index; - agc_value += e1000_igp_2_cable_length_table[cur_agc]; + agc_value += e1000_igp_2_cable_length_table[cur_agc_index]; } - agc_value -= (e1000_igp_2_cable_length_table[min_agc] + e1000_igp_2_cable_length_table[max_agc]); + agc_value -= (e1000_igp_2_cable_length_table[min_agc_index] + + e1000_igp_2_cable_length_table[max_agc_index]); agc_value /= (IGP02E1000_PHY_CHANNEL_NUM - 2); /* Calculate cable length with the error range of +/- 10 meters. */ @@ -6431,7 +6843,8 @@ e1000_check_polarity(struct e1000_hw *hw, return ret_val; *polarity = (phy_data & M88E1000_PSSR_REV_POLARITY) >> M88E1000_PSSR_REV_POLARITY_SHIFT; - } else if(hw->phy_type == e1000_phy_igp || + } else if (hw->phy_type == e1000_phy_igp || + hw->phy_type == e1000_phy_igp_3 || hw->phy_type == e1000_phy_igp_2) { /* Read the Status register to check the speed */ ret_val = e1000_read_phy_reg(hw, IGP01E1000_PHY_PORT_STATUS, @@ -6457,6 +6870,13 @@ e1000_check_polarity(struct e1000_hw *hw, * 100 Mbps this bit is always 0) */ *polarity = phy_data & IGP01E1000_PSSR_POLARITY_REVERSED; } + } else if (hw->phy_type == e1000_phy_ife) { + ret_val = e1000_read_phy_reg(hw, IFE_PHY_EXTENDED_STATUS_CONTROL, + &phy_data); + if (ret_val) + return ret_val; + *polarity = (phy_data & IFE_PESC_POLARITY_REVERSED) >> + IFE_PESC_POLARITY_REVERSED_SHIFT; } return E1000_SUCCESS; } @@ -6484,7 +6904,8 @@ e1000_check_downshift(struct e1000_hw *hw) DEBUGFUNC("e1000_check_downshift"); - if(hw->phy_type == e1000_phy_igp || + if (hw->phy_type == e1000_phy_igp || + hw->phy_type == e1000_phy_igp_3 || hw->phy_type == e1000_phy_igp_2) { ret_val = e1000_read_phy_reg(hw, IGP01E1000_PHY_LINK_HEALTH, &phy_data); @@ -6501,6 +6922,9 @@ e1000_check_downshift(struct e1000_hw *hw) hw->speed_downgraded = (phy_data & M88E1000_PSSR_DOWNSHIFT) >> M88E1000_PSSR_DOWNSHIFT_SHIFT; + } else if (hw->phy_type == e1000_phy_ife) { + /* e1000_phy_ife supports 10/100 speed only */ + hw->speed_downgraded = FALSE; } return E1000_SUCCESS; @@ -6545,7 +6969,9 @@ e1000_config_dsp_after_link_change(struct e1000_hw *hw, if(speed == SPEED_1000) { - e1000_get_cable_length(hw, &min_length, &max_length); + ret_val = e1000_get_cable_length(hw, &min_length, &max_length); + if (ret_val) + return ret_val; if((hw->dsp_config_state == e1000_dsp_config_enabled) && min_length >= e1000_igp_cable_length_50) { @@ -6753,20 +7179,27 @@ static int32_t e1000_set_d3_lplu_state(struct e1000_hw *hw, boolean_t active) { + uint32_t phy_ctrl = 0; int32_t ret_val; uint16_t phy_data; DEBUGFUNC("e1000_set_d3_lplu_state"); - if(hw->phy_type != e1000_phy_igp && hw->phy_type != e1000_phy_igp_2) + if (hw->phy_type != e1000_phy_igp && hw->phy_type != e1000_phy_igp_2 + && hw->phy_type != e1000_phy_igp_3) return E1000_SUCCESS; /* During driver activity LPLU should not be used or it will attain link * from the lowest speeds starting from 10Mbps. The capability is used for * Dx transitions and states */ - if(hw->mac_type == e1000_82541_rev_2 || hw->mac_type == e1000_82547_rev_2) { + if (hw->mac_type == e1000_82541_rev_2 || hw->mac_type == e1000_82547_rev_2) { ret_val = e1000_read_phy_reg(hw, IGP01E1000_GMII_FIFO, &phy_data); - if(ret_val) + if (ret_val) return ret_val; + } else if (hw->mac_type == e1000_ich8lan) { + /* MAC writes into PHY register based on the state transition + * and start auto-negotiation. SW driver can overwrite the settings + * in CSR PHY power control E1000_PHY_CTRL register. */ + phy_ctrl = E1000_READ_REG(hw, PHY_CTRL); } else { ret_val = e1000_read_phy_reg(hw, IGP02E1000_PHY_POWER_MGMT, &phy_data); if(ret_val) @@ -6781,11 +7214,16 @@ e1000_set_d3_lplu_state(struct e1000_hw *hw, if(ret_val) return ret_val; } else { + if (hw->mac_type == e1000_ich8lan) { + phy_ctrl &= ~E1000_PHY_CTRL_NOND0A_LPLU; + E1000_WRITE_REG(hw, PHY_CTRL, phy_ctrl); + } else { phy_data &= ~IGP02E1000_PM_D3_LPLU; ret_val = e1000_write_phy_reg(hw, IGP02E1000_PHY_POWER_MGMT, phy_data); if (ret_val) return ret_val; + } } /* LPLU and SmartSpeed are mutually exclusive. LPLU is used during @@ -6821,17 +7259,22 @@ e1000_set_d3_lplu_state(struct e1000_hw *hw, (hw->autoneg_advertised == AUTONEG_ADVERTISE_10_100_ALL)) { if(hw->mac_type == e1000_82541_rev_2 || - hw->mac_type == e1000_82547_rev_2) { + hw->mac_type == e1000_82547_rev_2) { phy_data |= IGP01E1000_GMII_FLEX_SPD; ret_val = e1000_write_phy_reg(hw, IGP01E1000_GMII_FIFO, phy_data); if(ret_val) return ret_val; } else { + if (hw->mac_type == e1000_ich8lan) { + phy_ctrl |= E1000_PHY_CTRL_NOND0A_LPLU; + E1000_WRITE_REG(hw, PHY_CTRL, phy_ctrl); + } else { phy_data |= IGP02E1000_PM_D3_LPLU; ret_val = e1000_write_phy_reg(hw, IGP02E1000_PHY_POWER_MGMT, phy_data); if (ret_val) return ret_val; + } } /* When LPLU is enabled we should disable SmartSpeed */ @@ -6866,6 +7309,7 @@ static int32_t e1000_set_d0_lplu_state(struct e1000_hw *hw, boolean_t active) { + uint32_t phy_ctrl = 0; int32_t ret_val; uint16_t phy_data; DEBUGFUNC("e1000_set_d0_lplu_state"); @@ -6873,15 +7317,24 @@ e1000_set_d0_lplu_state(struct e1000_hw *hw, if(hw->mac_type <= e1000_82547_rev_2) return E1000_SUCCESS; + if (hw->mac_type == e1000_ich8lan) { + phy_ctrl = E1000_READ_REG(hw, PHY_CTRL); + } else { ret_val = e1000_read_phy_reg(hw, IGP02E1000_PHY_POWER_MGMT, &phy_data); if(ret_val) return ret_val; + } if (!active) { + if (hw->mac_type == e1000_ich8lan) { + phy_ctrl &= ~E1000_PHY_CTRL_D0A_LPLU; + E1000_WRITE_REG(hw, PHY_CTRL, phy_ctrl); + } else { phy_data &= ~IGP02E1000_PM_D0_LPLU; ret_val = e1000_write_phy_reg(hw, IGP02E1000_PHY_POWER_MGMT, phy_data); if (ret_val) return ret_val; + } /* LPLU and SmartSpeed are mutually exclusive. LPLU is used during * Dx states where the power conservation is most important. During @@ -6914,10 +7367,15 @@ e1000_set_d0_lplu_state(struct e1000_hw *hw, } else { + if (hw->mac_type == e1000_ich8lan) { + phy_ctrl |= E1000_PHY_CTRL_D0A_LPLU; + E1000_WRITE_REG(hw, PHY_CTRL, phy_ctrl); + } else { phy_data |= IGP02E1000_PM_D0_LPLU; ret_val = e1000_write_phy_reg(hw, IGP02E1000_PHY_POWER_MGMT, phy_data); if (ret_val) return ret_val; + } /* When LPLU is enabled we should disable SmartSpeed */ ret_val = e1000_read_phy_reg(hw, IGP01E1000_PHY_PORT_CONFIG, &phy_data); @@ -7191,15 +7649,18 @@ e1000_mng_write_commit( * returns - TRUE when the mode is IAMT or FALSE. ****************************************************************************/ boolean_t -e1000_check_mng_mode( - struct e1000_hw *hw) +e1000_check_mng_mode(struct e1000_hw *hw) { uint32_t fwsm; fwsm = E1000_READ_REG(hw, FWSM); - if((fwsm & E1000_FWSM_MODE_MASK) == - (E1000_MNG_IAMT_MODE << E1000_FWSM_MODE_SHIFT)) + if (hw->mac_type == e1000_ich8lan) { + if ((fwsm & E1000_FWSM_MODE_MASK) == + (E1000_MNG_ICH_IAMT_MODE << E1000_FWSM_MODE_SHIFT)) + return TRUE; + } else if ((fwsm & E1000_FWSM_MODE_MASK) == + (E1000_MNG_IAMT_MODE << E1000_FWSM_MODE_SHIFT)) return TRUE; return FALSE; @@ -7439,7 +7900,6 @@ e1000_set_pci_express_master_disable(struct e1000_hw *hw) E1000_WRITE_REG(hw, CTRL, ctrl); } -#if 0 /*************************************************************************** * * Enables PCI-Express master access. @@ -7463,7 +7923,6 @@ e1000_enable_pciex_master(struct e1000_hw *hw) ctrl &= ~E1000_CTRL_GIO_MASTER_DISABLE; E1000_WRITE_REG(hw, CTRL, ctrl); } -#endif /* 0 */ /******************************************************************************* * @@ -7529,8 +7988,10 @@ e1000_get_auto_rd_done(struct e1000_hw *hw) case e1000_82572: case e1000_82573: case e1000_80003es2lan: - while(timeout) { - if (E1000_READ_REG(hw, EECD) & E1000_EECD_AUTO_RD) break; + case e1000_ich8lan: + while (timeout) { + if (E1000_READ_REG(hw, EECD) & E1000_EECD_AUTO_RD) + break; else msec_delay(1); timeout--; } @@ -7570,7 +8031,7 @@ e1000_get_phy_cfg_done(struct e1000_hw *hw) switch (hw->mac_type) { default: - msec_delay(10); + msec_delay_irq(10); break; case e1000_80003es2lan: /* Separate *_CFG_DONE_* bit for each port */ @@ -7753,6 +8214,13 @@ int32_t e1000_check_phy_reset_block(struct e1000_hw *hw) { uint32_t manc = 0; + uint32_t fwsm = 0; + + if (hw->mac_type == e1000_ich8lan) { + fwsm = E1000_READ_REG(hw, FWSM); + return (fwsm & E1000_FWSM_RSPCIPHY) ? E1000_SUCCESS + : E1000_BLK_PHY_RESET; + } if (hw->mac_type > e1000_82547_rev_2) manc = E1000_READ_REG(hw, MANC); @@ -7779,6 +8247,8 @@ e1000_arc_subsystem_valid(struct e1000_hw *hw) if((fwsm & E1000_FWSM_MODE_MASK) != 0) return TRUE; break; + case e1000_ich8lan: + return TRUE; default: break; } diff --git a/drivers/net/e1000/e1000_main.c b/drivers/net/e1000/e1000_main.c index cc0c77c4c17..f5c6f08966c 100644 --- a/drivers/net/e1000/e1000_main.c +++ b/drivers/net/e1000/e1000_main.c @@ -366,6 +366,7 @@ e1000_release_hw_control(struct e1000_adapter *adapter) { uint32_t ctrl_ext; uint32_t swsm; + uint32_t extcnf; /* Let firmware taken over control of h/w */ switch (adapter->hw.mac_type) { @@ -380,6 +381,11 @@ e1000_release_hw_control(struct e1000_adapter *adapter) swsm = E1000_READ_REG(&adapter->hw, SWSM); E1000_WRITE_REG(&adapter->hw, SWSM, swsm & ~E1000_SWSM_DRV_LOAD); + case e1000_ich8lan: + extcnf = E1000_READ_REG(&adapter->hw, CTRL_EXT); + E1000_WRITE_REG(&adapter->hw, CTRL_EXT, + extcnf & ~E1000_CTRL_EXT_DRV_LOAD); + break; default: break; } @@ -401,6 +407,7 @@ e1000_get_hw_control(struct e1000_adapter *adapter) { uint32_t ctrl_ext; uint32_t swsm; + uint32_t extcnf; /* Let firmware know the driver has taken over */ switch (adapter->hw.mac_type) { case e1000_82571: @@ -415,6 +422,11 @@ e1000_get_hw_control(struct e1000_adapter *adapter) E1000_WRITE_REG(&adapter->hw, SWSM, swsm | E1000_SWSM_DRV_LOAD); break; + case e1000_ich8lan: + extcnf = E1000_READ_REG(&adapter->hw, EXTCNF_CTRL); + E1000_WRITE_REG(&adapter->hw, EXTCNF_CTRL, + extcnf | E1000_EXTCNF_CTRL_SWFLAG); + break; default: break; } @@ -490,6 +502,7 @@ static void e1000_power_down_phy(struct e1000_adapter *adapter) * (b) AMT is active * (c) SoL/IDER session is active */ if (!adapter->wol && adapter->hw.mac_type >= e1000_82540 && + adapter->hw.mac_type != e1000_ich8lan && adapter->hw.media_type == e1000_media_type_copper && !(E1000_READ_REG(&adapter->hw, MANC) & E1000_MANC_SMBUS_EN) && !mng_mode_enabled && @@ -561,6 +574,9 @@ e1000_reset(struct e1000_adapter *adapter) case e1000_82573: pba = E1000_PBA_12K; break; + case e1000_ich8lan: + pba = E1000_PBA_8K; + break; default: pba = E1000_PBA_48K; break; @@ -585,6 +601,12 @@ e1000_reset(struct e1000_adapter *adapter) /* Set the FC high water mark to 90% of the FIFO size. * Required to clear last 3 LSB */ fc_high_water_mark = ((pba * 9216)/10) & 0xFFF8; + /* We can't use 90% on small FIFOs because the remainder + * would be less than 1 full frame. In this case, we size + * it to allow at least a full frame above the high water + * mark. */ + if (pba < E1000_PBA_16K) + fc_high_water_mark = (pba * 1024) - 1600; adapter->hw.fc_high_water = fc_high_water_mark; adapter->hw.fc_low_water = fc_high_water_mark - 8; @@ -622,6 +644,8 @@ e1000_reset(struct e1000_adapter *adapter) phy_data); } + if (adapter->hw.mac_type < e1000_ich8lan) + /* FIXME: this code is duplicate and wrong for PCI Express */ if (adapter->en_mng_pt) { manc = E1000_READ_REG(&adapter->hw, MANC); manc |= (E1000_MANC_ARP_EN | E1000_MANC_EN_MNG2HOST); @@ -648,6 +672,7 @@ e1000_probe(struct pci_dev *pdev, struct net_device *netdev; struct e1000_adapter *adapter; unsigned long mmio_start, mmio_len; + unsigned long flash_start, flash_len; static int cards_found = 0; static int e1000_ksp3_port_a = 0; /* global ksp3 port a indication */ @@ -657,10 +682,12 @@ e1000_probe(struct pci_dev *pdev, if ((err = pci_enable_device(pdev))) return err; - if (!(err = pci_set_dma_mask(pdev, DMA_64BIT_MASK))) { + if (!(err = pci_set_dma_mask(pdev, DMA_64BIT_MASK)) && + !(err = pci_set_consistent_dma_mask(pdev, DMA_64BIT_MASK))) { pci_using_dac = 1; } else { - if ((err = pci_set_dma_mask(pdev, DMA_32BIT_MASK))) { + if ((err = pci_set_dma_mask(pdev, DMA_32BIT_MASK)) && + (err = pci_set_consistent_dma_mask(pdev, DMA_32BIT_MASK))) { E1000_ERR("No usable DMA configuration, aborting\n"); return err; } @@ -740,6 +767,19 @@ e1000_probe(struct pci_dev *pdev, if ((err = e1000_sw_init(adapter))) goto err_sw_init; + /* Flash BAR mapping must happen after e1000_sw_init + * because it depends on mac_type */ + if ((adapter->hw.mac_type == e1000_ich8lan) && + (pci_resource_flags(pdev, 1) & IORESOURCE_MEM)) { + flash_start = pci_resource_start(pdev, 1); + flash_len = pci_resource_len(pdev, 1); + adapter->hw.flash_address = ioremap(flash_start, flash_len); + if (!adapter->hw.flash_address) { + err = -EIO; + goto err_flashmap; + } + } + if ((err = e1000_check_phy_reset_block(&adapter->hw))) DPRINTK(PROBE, INFO, "PHY reset is blocked due to SOL/IDER session.\n"); @@ -758,6 +798,8 @@ e1000_probe(struct pci_dev *pdev, NETIF_F_HW_VLAN_TX | NETIF_F_HW_VLAN_RX | NETIF_F_HW_VLAN_FILTER; + if (adapter->hw.mac_type == e1000_ich8lan) + netdev->features &= ~NETIF_F_HW_VLAN_FILTER; } #ifdef NETIF_F_TSO @@ -773,11 +815,17 @@ e1000_probe(struct pci_dev *pdev, if (pci_using_dac) netdev->features |= NETIF_F_HIGHDMA; - /* hard_start_xmit is safe against parallel locking */ netdev->features |= NETIF_F_LLTX; adapter->en_mng_pt = e1000_enable_mng_pass_thru(&adapter->hw); + /* initialize eeprom parameters */ + + if (e1000_init_eeprom_params(&adapter->hw)) { + E1000_ERR("EEPROM initialization failed\n"); + return -EIO; + } + /* before reading the EEPROM, reset the controller to * put the device in a known good starting state */ @@ -845,6 +893,11 @@ e1000_probe(struct pci_dev *pdev, EEPROM_INIT_CONTROL2_REG, 1, &eeprom_data); eeprom_apme_mask = E1000_EEPROM_82544_APM; break; + case e1000_ich8lan: + e1000_read_eeprom(&adapter->hw, + EEPROM_INIT_CONTROL1_REG, 1, &eeprom_data); + eeprom_apme_mask = E1000_EEPROM_ICH8_APME; + break; case e1000_82546: case e1000_82546_rev_3: case e1000_82571: @@ -904,6 +957,9 @@ e1000_probe(struct pci_dev *pdev, return 0; err_register: + if (adapter->hw.flash_address) + iounmap(adapter->hw.flash_address); +err_flashmap: err_sw_init: err_eeprom: iounmap(adapter->hw.hw_addr); @@ -937,6 +993,7 @@ e1000_remove(struct pci_dev *pdev) flush_scheduled_work(); if (adapter->hw.mac_type >= e1000_82540 && + adapter->hw.mac_type != e1000_ich8lan && adapter->hw.media_type == e1000_media_type_copper) { manc = E1000_READ_REG(&adapter->hw, MANC); if (manc & E1000_MANC_SMBUS_EN) { @@ -965,6 +1022,8 @@ e1000_remove(struct pci_dev *pdev) #endif iounmap(adapter->hw.hw_addr); + if (adapter->hw.flash_address) + iounmap(adapter->hw.flash_address); pci_release_regions(pdev); free_netdev(netdev); @@ -1015,13 +1074,6 @@ e1000_sw_init(struct e1000_adapter *adapter) return -EIO; } - /* initialize eeprom parameters */ - - if (e1000_init_eeprom_params(hw)) { - E1000_ERR("EEPROM initialization failed\n"); - return -EIO; - } - switch (hw->mac_type) { default: break; @@ -1257,8 +1309,7 @@ e1000_setup_tx_resources(struct e1000_adapter *adapter, int size; size = sizeof(struct e1000_buffer) * txdr->count; - - txdr->buffer_info = vmalloc_node(size, pcibus_to_node(pdev->bus)); + txdr->buffer_info = vmalloc(size); if (!txdr->buffer_info) { DPRINTK(PROBE, ERR, "Unable to allocate memory for the transmit descriptor ring\n"); @@ -1486,7 +1537,7 @@ e1000_setup_rx_resources(struct e1000_adapter *adapter, int size, desc_len; size = sizeof(struct e1000_buffer) * rxdr->count; - rxdr->buffer_info = vmalloc_node(size, pcibus_to_node(pdev->bus)); + rxdr->buffer_info = vmalloc(size); if (!rxdr->buffer_info) { DPRINTK(PROBE, ERR, "Unable to allocate memory for the receive descriptor ring\n"); @@ -2145,6 +2196,12 @@ e1000_set_multi(struct net_device *netdev) uint32_t rctl; uint32_t hash_value; int i, rar_entries = E1000_RAR_ENTRIES; + int mta_reg_count = (hw->mac_type == e1000_ich8lan) ? + E1000_NUM_MTA_REGISTERS_ICH8LAN : + E1000_NUM_MTA_REGISTERS; + + if (adapter->hw.mac_type == e1000_ich8lan) + rar_entries = E1000_RAR_ENTRIES_ICH8LAN; /* reserve RAR[14] for LAA over-write work-around */ if (adapter->hw.mac_type == e1000_82571) @@ -2191,7 +2248,7 @@ e1000_set_multi(struct net_device *netdev) /* clear the old settings from the multicast hash table */ - for (i = 0; i < E1000_NUM_MTA_REGISTERS; i++) { + for (i = 0; i < mta_reg_count; i++) { E1000_WRITE_REG_ARRAY(hw, MTA, i, 0); E1000_WRITE_FLUSH(hw); } @@ -2270,8 +2327,16 @@ e1000_watchdog(unsigned long data) struct net_device *netdev = adapter->netdev; struct e1000_tx_ring *txdr = adapter->tx_ring; uint32_t link, tctl; - - e1000_check_for_link(&adapter->hw); + int32_t ret_val; + + ret_val = e1000_check_for_link(&adapter->hw); + if ((ret_val == E1000_ERR_PHY) && + (adapter->hw.phy_type == e1000_phy_igp_3) && + (E1000_READ_REG(&adapter->hw, CTRL) & E1000_PHY_CTRL_GBE_DISABLE)) { + /* See e1000_kumeran_lock_loss_workaround() */ + DPRINTK(LINK, INFO, + "Gigabit has been disabled, downgrading speed\n"); + } if (adapter->hw.mac_type == e1000_82573) { e1000_enable_tx_pkt_filtering(&adapter->hw); if (adapter->mng_vlan_id != adapter->hw.mng_cookie.vlan_id) @@ -2837,6 +2902,7 @@ e1000_xmit_frame(struct sk_buff *skb, struct net_device *netdev) case e1000_82571: case e1000_82572: case e1000_82573: + case e1000_ich8lan: pull_size = min((unsigned int)4, skb->data_len); if (!__pskb_pull_tail(skb, pull_size)) { DPRINTK(DRV, ERR, @@ -3021,6 +3087,7 @@ e1000_change_mtu(struct net_device *netdev, int new_mtu) /* Adapter-specific max frame size limits. */ switch (adapter->hw.mac_type) { case e1000_undefined ... e1000_82542_rev2_1: + case e1000_ich8lan: if (max_frame > MAXIMUM_ETHERNET_FRAME_SIZE) { DPRINTK(PROBE, ERR, "Jumbo Frames not supported.\n"); return -EINVAL; @@ -3129,12 +3196,15 @@ e1000_update_stats(struct e1000_adapter *adapter) adapter->stats.bprc += E1000_READ_REG(hw, BPRC); adapter->stats.mprc += E1000_READ_REG(hw, MPRC); adapter->stats.roc += E1000_READ_REG(hw, ROC); + + if (adapter->hw.mac_type != e1000_ich8lan) { adapter->stats.prc64 += E1000_READ_REG(hw, PRC64); adapter->stats.prc127 += E1000_READ_REG(hw, PRC127); adapter->stats.prc255 += E1000_READ_REG(hw, PRC255); adapter->stats.prc511 += E1000_READ_REG(hw, PRC511); adapter->stats.prc1023 += E1000_READ_REG(hw, PRC1023); adapter->stats.prc1522 += E1000_READ_REG(hw, PRC1522); + } adapter->stats.symerrs += E1000_READ_REG(hw, SYMERRS); adapter->stats.mpc += E1000_READ_REG(hw, MPC); @@ -3162,12 +3232,16 @@ e1000_update_stats(struct e1000_adapter *adapter) adapter->stats.totl += E1000_READ_REG(hw, TOTL); adapter->stats.toth += E1000_READ_REG(hw, TOTH); adapter->stats.tpr += E1000_READ_REG(hw, TPR); + + if (adapter->hw.mac_type != e1000_ich8lan) { adapter->stats.ptc64 += E1000_READ_REG(hw, PTC64); adapter->stats.ptc127 += E1000_READ_REG(hw, PTC127); adapter->stats.ptc255 += E1000_READ_REG(hw, PTC255); adapter->stats.ptc511 += E1000_READ_REG(hw, PTC511); adapter->stats.ptc1023 += E1000_READ_REG(hw, PTC1023); adapter->stats.ptc1522 += E1000_READ_REG(hw, PTC1522); + } + adapter->stats.mptc += E1000_READ_REG(hw, MPTC); adapter->stats.bptc += E1000_READ_REG(hw, BPTC); @@ -3189,6 +3263,8 @@ e1000_update_stats(struct e1000_adapter *adapter) if (hw->mac_type > e1000_82547_rev_2) { adapter->stats.iac += E1000_READ_REG(hw, IAC); adapter->stats.icrxoc += E1000_READ_REG(hw, ICRXOC); + + if (adapter->hw.mac_type != e1000_ich8lan) { adapter->stats.icrxptc += E1000_READ_REG(hw, ICRXPTC); adapter->stats.icrxatc += E1000_READ_REG(hw, ICRXATC); adapter->stats.ictxptc += E1000_READ_REG(hw, ICTXPTC); @@ -3196,6 +3272,7 @@ e1000_update_stats(struct e1000_adapter *adapter) adapter->stats.ictxqec += E1000_READ_REG(hw, ICTXQEC); adapter->stats.ictxqmtc += E1000_READ_REG(hw, ICTXQMTC); adapter->stats.icrxdmtc += E1000_READ_REG(hw, ICRXDMTC); + } } /* Fill out the OS statistics structure */ @@ -4330,18 +4407,21 @@ e1000_vlan_rx_register(struct net_device *netdev, struct vlan_group *grp) ctrl |= E1000_CTRL_VME; E1000_WRITE_REG(&adapter->hw, CTRL, ctrl); + if (adapter->hw.mac_type != e1000_ich8lan) { /* enable VLAN receive filtering */ rctl = E1000_READ_REG(&adapter->hw, RCTL); rctl |= E1000_RCTL_VFE; rctl &= ~E1000_RCTL_CFIEN; E1000_WRITE_REG(&adapter->hw, RCTL, rctl); e1000_update_mng_vlan(adapter); + } } else { /* disable VLAN tag insert/strip */ ctrl = E1000_READ_REG(&adapter->hw, CTRL); ctrl &= ~E1000_CTRL_VME; E1000_WRITE_REG(&adapter->hw, CTRL, ctrl); + if (adapter->hw.mac_type != e1000_ich8lan) { /* disable VLAN filtering */ rctl = E1000_READ_REG(&adapter->hw, RCTL); rctl &= ~E1000_RCTL_VFE; @@ -4350,6 +4430,7 @@ e1000_vlan_rx_register(struct net_device *netdev, struct vlan_group *grp) e1000_vlan_rx_kill_vid(netdev, adapter->mng_vlan_id); adapter->mng_vlan_id = E1000_MNG_VLAN_NONE; } + } } e1000_irq_enable(adapter); @@ -4578,7 +4659,9 @@ e1000_suspend(struct pci_dev *pdev, pm_message_t state) pci_enable_wake(pdev, PCI_D3cold, 0); } + /* FIXME: this code is incorrect for PCI Express */ if (adapter->hw.mac_type >= e1000_82540 && + adapter->hw.mac_type != e1000_ich8lan && adapter->hw.media_type == e1000_media_type_copper) { manc = E1000_READ_REG(&adapter->hw, MANC); if (manc & E1000_MANC_SMBUS_EN) { @@ -4589,6 +4672,9 @@ e1000_suspend(struct pci_dev *pdev, pm_message_t state) } } + if (adapter->hw.phy_type == e1000_phy_igp_3) + e1000_phy_powerdown_workaround(&adapter->hw); + /* Release control of h/w to f/w. If f/w is AMT enabled, this * would have already happened in close and is redundant. */ e1000_release_hw_control(adapter); @@ -4624,7 +4710,9 @@ e1000_resume(struct pci_dev *pdev) netif_device_attach(netdev); + /* FIXME: this code is incorrect for PCI Express */ if (adapter->hw.mac_type >= e1000_82540 && + adapter->hw.mac_type != e1000_ich8lan && adapter->hw.media_type == e1000_media_type_copper) { manc = E1000_READ_REG(&adapter->hw, MANC); manc &= ~(E1000_MANC_ARP_EN); -- cgit v1.2.3-70-g09d2 From 1f9e7e3d32f7ff3fd3a936fc9ad59770b3d29774 Mon Sep 17 00:00:00 2001 From: Auke Kok Date: Tue, 27 Jun 2006 09:08:26 -0700 Subject: e1000: allow user to disable ich8 lock loss workaround The workaround for the ich8 lock loss problem is only needed for a very small amount of systems. This adds an option for the user to disable the workaround. Signed-off-by: Jesse Brandeburg Signed-off-by: Auke Kok --- drivers/net/e1000/e1000_param.c | 21 +++++++++++++++++++++ 1 file changed, 21 insertions(+) (limited to 'drivers/net') diff --git a/drivers/net/e1000/e1000_param.c b/drivers/net/e1000/e1000_param.c index bd6c040b3cf..0ef413172c6 100644 --- a/drivers/net/e1000/e1000_param.c +++ b/drivers/net/e1000/e1000_param.c @@ -202,6 +202,15 @@ E1000_PARAM(InterruptThrottleRate, "Interrupt Throttling Rate"); E1000_PARAM(SmartPowerDownEnable, "Enable PHY smart power down"); +/* Enable Kumeran Lock Loss workaround + * + * Valid Range: 0, 1 + * + * Default Value: 1 (enabled) + */ + +E1000_PARAM(KumeranLockLoss, "Enable Kumeran lock loss workaround"); + #define AUTONEG_ADV_DEFAULT 0x2F #define AUTONEG_ADV_MASK 0x2F #define FLOW_CONTROL_DEFAULT FLOW_CONTROL_FULL @@ -484,6 +493,18 @@ e1000_check_options(struct e1000_adapter *adapter) e1000_validate_option(&spd, &opt, adapter); adapter->smart_power_down = spd; } + { /* Kumeran Lock Loss Workaround */ + struct e1000_option opt = { + .type = enable_option, + .name = "Kumeran Lock Loss Workaround", + .err = "defaulting to Enabled", + .def = OPTION_ENABLED + }; + + int kmrn_lock_loss = KumeranLockLoss[bd]; + e1000_validate_option(&kmrn_lock_loss, &opt, adapter); + adapter->hw.kmrn_lock_loss_workaround_disabled = !kmrn_lock_loss; + } switch (adapter->hw.media_type) { case e1000_media_type_fiber: -- cgit v1.2.3-70-g09d2 From ae2c3860eb18712b71861bb6fc8d7e11e0f79e6d Mon Sep 17 00:00:00 2001 From: Auke Kok Date: Tue, 27 Jun 2006 09:08:30 -0700 Subject: e1000: add ich8lan device ID's Add the device ID's of the supported ICH8 LAN devices. Signed-off-by: Jesse Brandeburg Signed-off-by: Auke Kok --- drivers/net/e1000/e1000_main.c | 7 +++++++ 1 file changed, 7 insertions(+) (limited to 'drivers/net') diff --git a/drivers/net/e1000/e1000_main.c b/drivers/net/e1000/e1000_main.c index f5c6f08966c..70d2dfe2022 100644 --- a/drivers/net/e1000/e1000_main.c +++ b/drivers/net/e1000/e1000_main.c @@ -73,6 +73,11 @@ static struct pci_device_id e1000_pci_tbl[] = { INTEL_E1000_ETHERNET_DEVICE(0x1026), INTEL_E1000_ETHERNET_DEVICE(0x1027), INTEL_E1000_ETHERNET_DEVICE(0x1028), + INTEL_E1000_ETHERNET_DEVICE(0x1049), + INTEL_E1000_ETHERNET_DEVICE(0x104A), + INTEL_E1000_ETHERNET_DEVICE(0x104B), + INTEL_E1000_ETHERNET_DEVICE(0x104C), + INTEL_E1000_ETHERNET_DEVICE(0x104D), INTEL_E1000_ETHERNET_DEVICE(0x105E), INTEL_E1000_ETHERNET_DEVICE(0x105F), INTEL_E1000_ETHERNET_DEVICE(0x1060), @@ -96,6 +101,8 @@ static struct pci_device_id e1000_pci_tbl[] = { INTEL_E1000_ETHERNET_DEVICE(0x109A), INTEL_E1000_ETHERNET_DEVICE(0x10B5), INTEL_E1000_ETHERNET_DEVICE(0x10B9), + INTEL_E1000_ETHERNET_DEVICE(0x10BA), + INTEL_E1000_ETHERNET_DEVICE(0x10BB), /* required last entry */ {0,} }; -- cgit v1.2.3-70-g09d2 From e4ac9773be2ea01b707da0496ab1527ec6cdda4e Mon Sep 17 00:00:00 2001 From: Auke Kok Date: Tue, 27 Jun 2006 09:08:34 -0700 Subject: e1000: increase version to 7.1.9-k2 Increment the version to 7.1.9-k2 Signed-off-by: Jesse Brandeburg Signed-off-by: Auke Kok --- drivers/net/e1000/e1000_main.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/net') diff --git a/drivers/net/e1000/e1000_main.c b/drivers/net/e1000/e1000_main.c index 70d2dfe2022..f9a02c1ab52 100644 --- a/drivers/net/e1000/e1000_main.c +++ b/drivers/net/e1000/e1000_main.c @@ -36,7 +36,7 @@ static char e1000_driver_string[] = "Intel(R) PRO/1000 Network Driver"; #else #define DRIVERNAPI "-NAPI" #endif -#define DRV_VERSION "7.0.38-k4"DRIVERNAPI +#define DRV_VERSION "7.1.9-k2"DRIVERNAPI char e1000_driver_version[] = DRV_VERSION; static char e1000_copyright[] = "Copyright (c) 1999-2006 Intel Corporation."; -- cgit v1.2.3-70-g09d2 From 36e1e84768b1123eb632aff153104855c71684cc Mon Sep 17 00:00:00 2001 From: Jeff Garzik Date: Tue, 27 Jun 2006 07:38:33 -0400 Subject: [netdrvr] epic100: minor cleanups - Remove in-source changelog, it's in the global kernel history. - convert silly and useless version to useful one - replace invariant pci_id_tbl[]::io_size uses with EPIC_TOTAL_SIZE - remove now-unused io_size member from pci_id_tbl[] - current kernel style prefers dev_printk() for the rare ethernet driver messages that cannot print an 'eth%d' prefix. Signed-off-by: Jeff Garzik --- drivers/net/epic100.c | 71 ++++++++------------------------------------------- 1 file changed, 10 insertions(+), 61 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/epic100.c b/drivers/net/epic100.c index 9f3e09a3d88..05c9a26a74e 100644 --- a/drivers/net/epic100.c +++ b/drivers/net/epic100.c @@ -19,62 +19,15 @@ Information and updates available at http://www.scyld.com/network/epic100.html + [this link no longer provides anything useful -jgarzik] --------------------------------------------------------------------- - Linux kernel-specific changes: - - LK1.1.2 (jgarzik): - * Merge becker version 1.09 (4/08/2000) - - LK1.1.3: - * Major bugfix to 1.09 driver (Francis Romieu) - - LK1.1.4 (jgarzik): - * Merge becker test version 1.09 (5/29/2000) - - LK1.1.5: - * Fix locking (jgarzik) - * Limit 83c175 probe to ethernet-class PCI devices (rgooch) - - LK1.1.6: - * Merge becker version 1.11 - * Move pci_enable_device before any PCI BAR len checks - - LK1.1.7: - * { fill me in } - - LK1.1.8: - * ethtool driver info support (jgarzik) - - LK1.1.9: - * ethtool media get/set support (jgarzik) - - LK1.1.10: - * revert MII transceiver init change (jgarzik) - - LK1.1.11: - * implement ETHTOOL_[GS]SET, _NWAY_RST, _[GS]MSGLVL, _GLINK (jgarzik) - * replace some MII-related magic numbers with constants - - LK1.1.12: - * fix power-up sequence - - LK1.1.13: - * revert version 1.1.12, power-up sequence "fix" - - LK1.1.14 (Kryzsztof Halasa): - * fix spurious bad initializations - * pound phy a la SMSC's app note on the subject - - AC1.1.14ac - * fix power up/down for ethtool that broke in 1.11 - */ #define DRV_NAME "epic100" -#define DRV_VERSION "1.11+LK1.1.14+AC1.1.14" -#define DRV_RELDATE "June 2, 2004" +#define DRV_VERSION "2.0" +#define DRV_RELDATE "June 27, 2006" /* The user-configurable values. These may be modified when a driver module is loaded.*/ @@ -204,19 +157,15 @@ typedef enum { struct epic_chip_info { const char *name; - int io_size; /* Needed for I/O region check or ioremap(). */ int drv_flags; /* Driver use, intended as capability flags. */ }; /* indexed by chip_t */ static const struct epic_chip_info pci_id_tbl[] = { - { "SMSC EPIC/100 83c170", - EPIC_TOTAL_SIZE, TYPE2_INTR | NO_MII | MII_PWRDWN }, - { "SMSC EPIC/100 83c170", - EPIC_TOTAL_SIZE, TYPE2_INTR }, - { "SMSC EPIC/C 83c175", - EPIC_TOTAL_SIZE, TYPE2_INTR | MII_PWRDWN }, + { "SMSC EPIC/100 83c170", TYPE2_INTR | NO_MII | MII_PWRDWN }, + { "SMSC EPIC/100 83c170", TYPE2_INTR }, + { "SMSC EPIC/C 83c175", TYPE2_INTR | MII_PWRDWN }, }; @@ -385,8 +334,8 @@ static int __devinit epic_init_one (struct pci_dev *pdev, goto out; irq = pdev->irq; - if (pci_resource_len(pdev, 0) < pci_id_tbl[chip_idx].io_size) { - printk (KERN_ERR "card %d: no PCI region space\n", card_idx); + if (pci_resource_len(pdev, 0) < EPIC_TOTAL_SIZE) { + dev_printk(KERN_ERR, &pdev->dev, "no PCI region space\n"); ret = -ENODEV; goto err_out_disable; } @@ -401,7 +350,7 @@ static int __devinit epic_init_one (struct pci_dev *pdev, dev = alloc_etherdev(sizeof (*ep)); if (!dev) { - printk (KERN_ERR "card %d: no memory for eth device\n", card_idx); + dev_printk(KERN_ERR, &pdev->dev, "no memory for eth device\n"); goto err_out_free_res; } SET_MODULE_OWNER(dev); @@ -413,7 +362,7 @@ static int __devinit epic_init_one (struct pci_dev *pdev, ioaddr = pci_resource_start (pdev, 1); ioaddr = (long) ioremap (ioaddr, pci_resource_len (pdev, 1)); if (!ioaddr) { - printk (KERN_ERR DRV_NAME " %d: ioremap failed\n", card_idx); + dev_printk(KERN_ERR, &pdev->dev, "ioremap failed\n"); goto err_out_free_netdev; } #endif -- cgit v1.2.3-70-g09d2 From 03a8c6611aa18f919f8700b18f925e9008b616a8 Mon Sep 17 00:00:00 2001 From: Jeff Garzik Date: Tue, 27 Jun 2006 07:57:22 -0400 Subject: [netdrvr] Remove Linux-specific changelogs from several Becker template drivers When in-kernel net drivers branched from Donald Becker's vanilla driver set, in the days before BitKeeper and git, a driver changelog was maintained in the driver source code. These days, the kernel's changelog is far superior and much more accurate, so the in-driver changelogs are removed. Another relic of the Becker/kernel split was version numbering, using "foo-LKx.y.z" notation, resulting in weird version numbers like "1.17b-LK1.1.9". These drivers are for older hardware, and see few changes these days, so the version numbers were all bumped to something more simple. Finally, in xircom_tulip_cb specifically, an additional cleanup removes the always-enabled CARDBUS cpp macro. Signed-off-by: Jeff Garzik --- drivers/net/dl2k.c | 43 +------------ drivers/net/hamachi.c | 13 +--- drivers/net/natsemi.c | 117 +--------------------------------- drivers/net/starfire.c | 122 +----------------------------------- drivers/net/sundance.c | 84 +------------------------ drivers/net/tulip/xircom_tulip_cb.c | 27 ++------ drivers/net/via-rhine.c | 110 +------------------------------- drivers/net/yellowfin.c | 30 +-------- 8 files changed, 24 insertions(+), 522 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/dl2k.c b/drivers/net/dl2k.c index 4b6ddb70f92..402961e68c8 100644 --- a/drivers/net/dl2k.c +++ b/drivers/net/dl2k.c @@ -9,49 +9,10 @@ the Free Software Foundation; either version 2 of the License, or (at your option) any later version. */ -/* - Rev Date Description - ========================================================================== - 0.01 2001/05/03 Created DL2000-based linux driver - 0.02 2001/05/21 Added VLAN and hardware checksum support. - 1.00 2001/06/26 Added jumbo frame support. - 1.01 2001/08/21 Added two parameters, rx_coalesce and rx_timeout. - 1.02 2001/10/08 Supported fiber media. - Added flow control parameters. - 1.03 2001/10/12 Changed the default media to 1000mbps_fd for - the fiber devices. - 1.04 2001/11/08 Fixed Tx stopped when tx very busy. - 1.05 2001/11/22 Fixed Tx stopped when unidirectional tx busy. - 1.06 2001/12/13 Fixed disconnect bug at 10Mbps mode. - Fixed tx_full flag incorrect. - Added tx_coalesce paramter. - 1.07 2002/01/03 Fixed miscount of RX frame error. - 1.08 2002/01/17 Fixed the multicast bug. - 1.09 2002/03/07 Move rx-poll-now to re-fill loop. - Added rio_timer() to watch rx buffers. - 1.10 2002/04/16 Fixed miscount of carrier error. - 1.11 2002/05/23 Added ISR schedule scheme - Fixed miscount of rx frame error for DGE-550SX. - Fixed VLAN bug. - 1.12 2002/06/13 Lock tx_coalesce=1 on 10/100Mbps mode. - 1.13 2002/08/13 1. Fix disconnection (many tx:carrier/rx:frame - errs) with some mainboards. - 2. Use definition "DRV_NAME" "DRV_VERSION" - "DRV_RELDATE" for flexibility. - 1.14 2002/08/14 Support ethtool. - 1.15 2002/08/27 Changed the default media to Auto-Negotiation - for the fiber devices. - 1.16 2002/09/04 More power down time for fiber devices auto- - negotiation. - Fix disconnect bug after ifup and ifdown. - 1.17 2002/10/03 Fix RMON statistics overflow. - Always use I/O mapping to access eeprom, - avoid system freezing with some chipsets. -*/ #define DRV_NAME "D-Link DL2000-based linux driver" -#define DRV_VERSION "v1.17b" -#define DRV_RELDATE "2006/03/10" +#define DRV_VERSION "v1.18" +#define DRV_RELDATE "2006/06/27" #include "dl2k.h" #include diff --git a/drivers/net/hamachi.c b/drivers/net/hamachi.c index 7bcd939c6ed..1b212a56933 100644 --- a/drivers/net/hamachi.c +++ b/drivers/net/hamachi.c @@ -20,22 +20,15 @@ Support and updates available at http://www.scyld.com/network/hamachi.html + [link no longer provides useful info -jgarzik] or http://www.parl.clemson.edu/~keithu/hamachi.html - - - Linux kernel changelog: - - LK1.0.1: - - fix lack of pci_dev<->dev association - - ethtool support (jgarzik) - */ #define DRV_NAME "hamachi" -#define DRV_VERSION "1.01+LK1.0.1" -#define DRV_RELDATE "5/18/2001" +#define DRV_VERSION "2.0" +#define DRV_RELDATE "June 27, 2006" /* A few user-configurable values. */ diff --git a/drivers/net/natsemi.c b/drivers/net/natsemi.c index 9df2628be1e..db0475a1102 100644 --- a/drivers/net/natsemi.c +++ b/drivers/net/natsemi.c @@ -20,120 +20,9 @@ Support information and updates available at http://www.scyld.com/network/netsemi.html + [link no longer provides useful info -jgarzik] - Linux kernel modifications: - - Version 1.0.1: - - Spinlock fixes - - Bug fixes and better intr performance (Tjeerd) - Version 1.0.2: - - Now reads correct MAC address from eeprom - Version 1.0.3: - - Eliminate redundant priv->tx_full flag - - Call netif_start_queue from dev->tx_timeout - - wmb() in start_tx() to flush data - - Update Tx locking - - Clean up PCI enable (davej) - Version 1.0.4: - - Merge Donald Becker's natsemi.c version 1.07 - Version 1.0.5: - - { fill me in } - Version 1.0.6: - * ethtool support (jgarzik) - * Proper initialization of the card (which sometimes - fails to occur and leaves the card in a non-functional - state). (uzi) - - * Some documented register settings to optimize some - of the 100Mbit autodetection circuitry in rev C cards. (uzi) - - * Polling of the PHY intr for stuff like link state - change and auto- negotiation to finally work properly. (uzi) - - * One-liner removal of a duplicate declaration of - netdev_error(). (uzi) - - Version 1.0.7: (Manfred Spraul) - * pci dma - * SMP locking update - * full reset added into tx_timeout - * correct multicast hash generation (both big and little endian) - [copied from a natsemi driver version - from Myrio Corporation, Greg Smith] - * suspend/resume - - version 1.0.8 (Tim Hockin ) - * ETHTOOL_* support - * Wake on lan support (Erik Gilling) - * MXDMA fixes for serverworks - * EEPROM reload - - version 1.0.9 (Manfred Spraul) - * Main change: fix lack of synchronize - netif_close/netif_suspend against a last interrupt - or packet. - * do not enable superflous interrupts (e.g. the - drivers relies on TxDone - TxIntr not needed) - * wait that the hardware has really stopped in close - and suspend. - * workaround for the (at least) gcc-2.95.1 compiler - problem. Also simplifies the code a bit. - * disable_irq() in tx_timeout - needed to protect - against rx interrupts. - * stop the nic before switching into silent rx mode - for wol (required according to docu). - - version 1.0.10: - * use long for ee_addr (various) - * print pointers properly (DaveM) - * include asm/irq.h (?) - - version 1.0.11: - * check and reset if PHY errors appear (Adrian Sun) - * WoL cleanup (Tim Hockin) - * Magic number cleanup (Tim Hockin) - * Don't reload EEPROM on every reset (Tim Hockin) - * Save and restore EEPROM state across reset (Tim Hockin) - * MDIO Cleanup (Tim Hockin) - * Reformat register offsets/bits (jgarzik) - - version 1.0.12: - * ETHTOOL_* further support (Tim Hockin) - - version 1.0.13: - * ETHTOOL_[G]EEPROM support (Tim Hockin) - - version 1.0.13: - * crc cleanup (Matt Domsch ) - - version 1.0.14: - * Cleanup some messages and autoneg in ethtool (Tim Hockin) - - version 1.0.15: - * Get rid of cable_magic flag - * use new (National provided) solution for cable magic issue - - version 1.0.16: - * call netdev_rx() for RxErrors (Manfred Spraul) - * formatting and cleanups - * change options and full_duplex arrays to be zero - initialized - * enable only the WoL and PHY interrupts in wol mode - - version 1.0.17: - * only do cable_magic on 83815 and early 83816 (Tim Hockin) - * create a function for rx refill (Manfred Spraul) - * combine drain_ring and init_ring (Manfred Spraul) - * oom handling (Manfred Spraul) - * hands_off instead of playing with netif_device_{de,a}ttach - (Manfred Spraul) - * be sure to write the MAC back to the chip (Manfred Spraul) - * lengthen EEPROM timeout, and always warn about timeouts - (Manfred Spraul) - * comments update (Manfred) - * do the right thing on a phy-reset (Manfred and Tim) - TODO: * big endian support with CFG:BEM instead of cpu_to_le32 */ @@ -165,8 +54,8 @@ #include #define DRV_NAME "natsemi" -#define DRV_VERSION "1.07+LK1.0.17" -#define DRV_RELDATE "Sep 27, 2002" +#define DRV_VERSION "2.0" +#define DRV_RELDATE "June 27, 2006" #define RX_OFFSET 2 diff --git a/drivers/net/starfire.c b/drivers/net/starfire.c index ed1f59901ff..24d55b4591b 100644 --- a/drivers/net/starfire.c +++ b/drivers/net/starfire.c @@ -22,129 +22,13 @@ Support and updates available at http://www.scyld.com/network/starfire.html + [link no longer provides useful info -jgarzik] - ----------------------------------------------------------- - - Linux kernel-specific changes: - - LK1.1.1 (jgarzik): - - Use PCI driver interface - - Fix MOD_xxx races - - softnet fixups - - LK1.1.2 (jgarzik): - - Merge Becker version 0.15 - - LK1.1.3 (Andrew Morton) - - Timer cleanups - - LK1.1.4 (jgarzik): - - Merge Becker version 1.03 - - LK1.2.1 (Ion Badulescu ) - - Support hardware Rx/Tx checksumming - - Use the GFP firmware taken from Adaptec's Netware driver - - LK1.2.2 (Ion Badulescu) - - Backported to 2.2.x - - LK1.2.3 (Ion Badulescu) - - Fix the flaky mdio interface - - More compat clean-ups - - LK1.2.4 (Ion Badulescu) - - More 2.2.x initialization fixes - - LK1.2.5 (Ion Badulescu) - - Several fixes from Manfred Spraul - - LK1.2.6 (Ion Badulescu) - - Fixed ifup/ifdown/ifup problem in 2.4.x - - LK1.2.7 (Ion Badulescu) - - Removed unused code - - Made more functions static and __init - - LK1.2.8 (Ion Badulescu) - - Quell bogus error messages, inform about the Tx threshold - - Removed #ifdef CONFIG_PCI, this driver is PCI only - - LK1.2.9 (Ion Badulescu) - - Merged Jeff Garzik's changes from 2.4.4-pre5 - - Added 2.2.x compatibility stuff required by the above changes - - LK1.2.9a (Ion Badulescu) - - More updates from Jeff Garzik - - LK1.3.0 (Ion Badulescu) - - Merged zerocopy support - - LK1.3.1 (Ion Badulescu) - - Added ethtool support - - Added GPIO (media change) interrupt support - - LK1.3.2 (Ion Badulescu) - - Fixed 2.2.x compatibility issues introduced in 1.3.1 - - Fixed ethtool ioctl returning uninitialized memory - - LK1.3.3 (Ion Badulescu) - - Initialize the TxMode register properly - - Don't dereference dev->priv after freeing it - - LK1.3.4 (Ion Badulescu) - - Fixed initialization timing problems - - Fixed interrupt mask definitions - - LK1.3.5 (jgarzik) - - ethtool NWAY_RST, GLINK, [GS]MSGLVL support - - LK1.3.6: - - Sparc64 support and fixes (Ion Badulescu) - - Better stats and error handling (Ion Badulescu) - - Use new pci_set_mwi() PCI API function (jgarzik) - - LK1.3.7 (Ion Badulescu) - - minimal implementation of tx_timeout() - - correctly shutdown the Rx/Tx engines in netdev_close() - - added calls to netif_carrier_on/off - (patch from Stefan Rompf ) - - VLAN support - - LK1.3.8 (Ion Badulescu) - - adjust DMA burst size on sparc64 - - 64-bit support - - reworked zerocopy support for 64-bit buffers - - working and usable interrupt mitigation/latency - - reduced Tx interrupt frequency for lower interrupt overhead - - LK1.3.9 (Ion Badulescu) - - bugfix for mcast filter - - enable the right kind of Tx interrupts (TxDMADone, not TxDone) - - LK1.4.0 (Ion Badulescu) - - NAPI support - - LK1.4.1 (Ion Badulescu) - - flush PCI posting buffers after disabling Rx interrupts - - put the chip to a D3 slumber on driver unload - - added config option to enable/disable NAPI - - LK1.4.2 (Ion Badulescu) - - finally added firmware (GPL'ed by Adaptec) - - removed compatibility code for 2.2.x - - LK1.4.2.1 (Ion Badulescu) - - fixed 32/64 bit issues on i386 + CONFIG_HIGHMEM - - added 32-bit padding to outgoing skb's, removed previous workaround - -TODO: - fix forced speed/duplexing code (broken a long time ago, when - somebody converted the driver to use the generic MII code) - - fix VLAN support */ #define DRV_NAME "starfire" -#define DRV_VERSION "1.03+LK1.4.2.1" -#define DRV_RELDATE "October 3, 2005" +#define DRV_VERSION "2.0" +#define DRV_RELDATE "June 27, 2006" #include #include diff --git a/drivers/net/sundance.c b/drivers/net/sundance.c index 643fceae3db..de664519665 100644 --- a/drivers/net/sundance.c +++ b/drivers/net/sundance.c @@ -16,91 +16,13 @@ Support and updates available at http://www.scyld.com/network/sundance.html + [link no longer provides useful info -jgarzik] - - Version LK1.01a (jgarzik): - - Replace some MII-related magic numbers with constants - - Version LK1.02 (D-Link): - - Add new board to PCI ID list - - Fix multicast bug - - Version LK1.03 (D-Link): - - New Rx scheme, reduce Rx congestion - - Option to disable flow control - - Version LK1.04 (D-Link): - - Tx timeout recovery - - More support for ethtool. - - Version LK1.04a: - - Remove unused/constant members from struct pci_id_info - (which then allows removal of 'drv_flags' from private struct) - (jgarzik) - - If no phy is found, fail to load that board (jgarzik) - - Always start phy id scan at id 1 to avoid problems (Donald Becker) - - Autodetect where mii_preable_required is needed, - default to not needed. (Donald Becker) - - Version LK1.04b: - - Remove mii_preamble_required module parameter (Donald Becker) - - Add per-interface mii_preamble_required (setting is autodetected) - (Donald Becker) - - Remove unnecessary cast from void pointer (jgarzik) - - Re-align comments in private struct (jgarzik) - - Version LK1.04c (jgarzik): - - Support bitmapped message levels (NETIF_MSG_xxx), and the - two ethtool ioctls that get/set them - - Don't hand-code MII ethtool support, use standard API/lib - - Version LK1.04d: - - Merge from Donald Becker's sundance.c: (Jason Lunz) - * proper support for variably-sized MTUs - * default to PIO, to fix chip bugs - - Add missing unregister_netdev (Jason Lunz) - - Add CONFIG_SUNDANCE_MMIO config option (jgarzik) - - Better rx buf size calculation (Donald Becker) - - Version LK1.05 (D-Link): - - Fix DFE-580TX packet drop issue (for DL10050C) - - Fix reset_tx logic - - Version LK1.06 (D-Link): - - Fix crash while unloading driver - - Versin LK1.06b (D-Link): - - New tx scheme, adaptive tx_coalesce - - Version LK1.07 (D-Link): - - Fix tx bugs in big-endian machines - - Remove unused max_interrupt_work module parameter, the new - NAPI-like rx scheme doesn't need it. - - Remove redundancy get_stats() in intr_handler(), those - I/O access could affect performance in ARM-based system - - Add Linux software VLAN support - - Version LK1.08 (Philippe De Muyter phdm@macqel.be): - - Fix bug of custom mac address - (StationAddr register only accept word write) - - Version LK1.09 (D-Link): - - Fix the flowctrl bug. - - Set Pause bit in MII ANAR if flow control enabled. - - Version LK1.09a (ICPlus): - - Add the delay time in reading the contents of EEPROM - - Version LK1.10 (Philippe De Muyter phdm@macqel.be): - - Make 'unblock interface after Tx underrun' work - - Version LK1.11 (Pedro Alejandro Lopez-Valencia palopezv at gmail.com): - - Add support for IC Plus Corporation IP100A chipset */ #define DRV_NAME "sundance" -#define DRV_VERSION "1.01+LK1.11" -#define DRV_RELDATE "14-Jun-2006" +#define DRV_VERSION "1.1" +#define DRV_RELDATE "27-Jun-2006" /* The user-configurable values. diff --git a/drivers/net/tulip/xircom_tulip_cb.c b/drivers/net/tulip/xircom_tulip_cb.c index 091ebb7a62f..17ca7dc42e6 100644 --- a/drivers/net/tulip/xircom_tulip_cb.c +++ b/drivers/net/tulip/xircom_tulip_cb.c @@ -10,26 +10,11 @@ 410 Severn Ave., Suite 210 Annapolis MD 21403 - ----------------------------------------------------------- - - Linux kernel-specific changes: - - LK1.0 (Ion Badulescu) - - Major cleanup - - Use 2.4 PCI API - - Support ethtool - - Rewrite perfect filter/hash code - - Use interrupts for media changes - - LK1.1 (Ion Badulescu) - - Disallow negotiation of unsupported full-duplex modes */ #define DRV_NAME "xircom_tulip_cb" -#define DRV_VERSION "0.91+LK1.1" -#define DRV_RELDATE "October 11, 2001" - -#define CARDBUS 1 +#define DRV_VERSION "0.92" +#define DRV_RELDATE "June 27, 2006" /* A few user-configurable values. */ @@ -306,10 +291,10 @@ struct xircom_private { struct xircom_tx_desc tx_ring[TX_RING_SIZE]; /* The saved address of a sent-in-place packet/buffer, for skfree(). */ struct sk_buff* tx_skbuff[TX_RING_SIZE]; -#ifdef CARDBUS + /* The X3201-3 requires 4-byte aligned tx bufs */ struct sk_buff* tx_aligned_skbuff[TX_RING_SIZE]; -#endif + /* The addresses of receive-in-place skbuffs. */ struct sk_buff* rx_skbuff[RX_RING_SIZE]; u16 setup_frame[PKT_SETUP_SZ / sizeof(u16)]; /* Pseudo-Tx frame to init address table. */ @@ -908,10 +893,8 @@ static void xircom_init_ring(struct net_device *dev) tp->tx_skbuff[i] = NULL; tp->tx_ring[i].status = 0; tp->tx_ring[i].buffer2 = virt_to_bus(&tp->tx_ring[i+1]); -#ifdef CARDBUS if (tp->chip_id == X3201_3) tp->tx_aligned_skbuff[i] = dev_alloc_skb(PKT_BUF_SZ); -#endif /* CARDBUS */ } tp->tx_ring[i-1].buffer2 = virt_to_bus(&tp->tx_ring[0]); } @@ -931,12 +914,10 @@ xircom_start_xmit(struct sk_buff *skb, struct net_device *dev) entry = tp->cur_tx % TX_RING_SIZE; tp->tx_skbuff[entry] = skb; -#ifdef CARDBUS if (tp->chip_id == X3201_3) { memcpy(tp->tx_aligned_skbuff[entry]->data,skb->data,skb->len); tp->tx_ring[entry].buffer1 = virt_to_bus(tp->tx_aligned_skbuff[entry]->data); } else -#endif tp->tx_ring[entry].buffer1 = virt_to_bus(skb->data); if (tp->cur_tx - tp->dirty_tx < TX_RING_SIZE/2) {/* Typical path */ diff --git a/drivers/net/via-rhine.c b/drivers/net/via-rhine.c index 98b6f3207d3..e48e76ce73a 100644 --- a/drivers/net/via-rhine.c +++ b/drivers/net/via-rhine.c @@ -25,117 +25,13 @@ version. He may or may not be interested in bug reports on this code. You can find his versions at: http://www.scyld.com/network/via-rhine.html - - - Linux kernel version history: - - LK1.1.0: - - Jeff Garzik: softnet 'n stuff - - LK1.1.1: - - Justin Guyett: softnet and locking fixes - - Jeff Garzik: use PCI interface - - LK1.1.2: - - Urban Widmark: minor cleanups, merges from Becker 1.03a/1.04 versions - - LK1.1.3: - - Urban Widmark: use PCI DMA interface (with thanks to the eepro100.c - code) update "Theory of Operation" with - softnet/locking changes - - Dave Miller: PCI DMA and endian fixups - - Jeff Garzik: MOD_xxx race fixes, updated PCI resource allocation - - LK1.1.4: - - Urban Widmark: fix gcc 2.95.2 problem and - remove writel's to fixed address 0x7c - - LK1.1.5: - - Urban Widmark: mdio locking, bounce buffer changes - merges from Beckers 1.05 version - added netif_running_on/off support - - LK1.1.6: - - Urban Widmark: merges from Beckers 1.08b version (VT6102 + mdio) - set netif_running_on/off on startup, del_timer_sync - - LK1.1.7: - - Manfred Spraul: added reset into tx_timeout - - LK1.1.9: - - Urban Widmark: merges from Beckers 1.10 version - (media selection + eeprom reload) - - David Vrabel: merges from D-Link "1.11" version - (disable WOL and PME on startup) - - LK1.1.10: - - Manfred Spraul: use "singlecopy" for unaligned buffers - don't allocate bounce buffers for !ReqTxAlign cards - - LK1.1.11: - - David Woodhouse: Set dev->base_addr before the first time we call - wait_for_reset(). It's a lot happier that way. - Free np->tx_bufs only if we actually allocated it. - - LK1.1.12: - - Martin Eriksson: Allow Memory-Mapped IO to be enabled. - - LK1.1.13 (jgarzik): - - Add ethtool support - - Replace some MII-related magic numbers with constants - - LK1.1.14 (Ivan G.): - - fixes comments for Rhine-III - - removes W_MAX_TIMEOUT (unused) - - adds HasDavicomPhy for Rhine-I (basis: linuxfet driver; my card - is R-I and has Davicom chip, flag is referenced in kernel driver) - - sends chip_id as a parameter to wait_for_reset since np is not - initialized on first call - - changes mmio "else if (chip_id==VT6102)" to "else" so it will work - for Rhine-III's (documentation says same bit is correct) - - transmit frame queue message is off by one - fixed - - adds IntrNormalSummary to "Something Wicked" exclusion list - so normal interrupts will not trigger the message (src: Donald Becker) - (Roger Luethi) - - show confused chip where to continue after Tx error - - location of collision counter is chip specific - - allow selecting backoff algorithm (module parameter) - - LK1.1.15 (jgarzik): - - Use new MII lib helper generic_mii_ioctl - - LK1.1.16 (Roger Luethi) - - Etherleak fix - - Handle Tx buffer underrun - - Fix bugs in full duplex handling - - New reset code uses "force reset" cmd on Rhine-II - - Various clean ups - - LK1.1.17 (Roger Luethi) - - Fix race in via_rhine_start_tx() - - On errors, wait for Tx engine to turn off before scavenging - - Handle Tx descriptor write-back race on Rhine-II - - Force flushing for PCI posted writes - - More reset code changes - - LK1.1.18 (Roger Luethi) - - No filtering multicast in promisc mode (Edward Peng) - - Fix for Rhine-I Tx timeouts - - LK1.1.19 (Roger Luethi) - - Increase Tx threshold for unspecified errors - - LK1.2.0-2.6 (Roger Luethi) - - Massive clean-up - - Rewrite PHY, media handling (remove options, full_duplex, backoff) - - Fix Tx engine race for good - - Craig Brind: Zero padded aligned buffers for short packets. + [link no longer provides useful info -jgarzik] */ #define DRV_NAME "via-rhine" -#define DRV_VERSION "1.2.0-2.6" -#define DRV_RELDATE "June-10-2004" +#define DRV_VERSION "1.4.0" +#define DRV_RELDATE "June-27-2006" /* A few user-configurable values. diff --git a/drivers/net/yellowfin.c b/drivers/net/yellowfin.c index bbbf7e274a2..207340fe8df 100644 --- a/drivers/net/yellowfin.c +++ b/drivers/net/yellowfin.c @@ -19,37 +19,13 @@ Support and updates available at http://www.scyld.com/network/yellowfin.html + [link no longer provides useful info -jgarzik] - - Linux kernel changelog: - ----------------------- - - LK1.1.1 (jgarzik): Port to 2.4 kernel - - LK1.1.2 (jgarzik): - * Merge in becker version 1.05 - - LK1.1.3 (jgarzik): - * Various cleanups - * Update yellowfin_timer to correctly calculate duplex. - (suggested by Manfred Spraul) - - LK1.1.4 (val@nmt.edu): - * Fix three endian-ness bugs - * Support dual function SYM53C885E ethernet chip - - LK1.1.5 (val@nmt.edu): - * Fix forced full-duplex bug I introduced - - LK1.1.6 (val@nmt.edu): - * Only print warning on truly "oversized" packets - * Fix theoretical bug on gigabit cards - return to 1.1.3 behavior - */ #define DRV_NAME "yellowfin" -#define DRV_VERSION "1.05+LK1.1.6" -#define DRV_RELDATE "Feb 11, 2002" +#define DRV_VERSION "2.0" +#define DRV_RELDATE "Jun 27, 2006" #define PFX DRV_NAME ": " -- cgit v1.2.3-70-g09d2 From c3d8e682b7d10f57d13c86ecbb15806781d6e953 Mon Sep 17 00:00:00 2001 From: Jeff Garzik Date: Tue, 27 Jun 2006 08:54:34 -0400 Subject: [netdrvr] Remove Becker-template 'io_size' member, when invariant Becker-derived drivers often have the 'io_size' member in their chip info struct, indicating the minimum required size of the I/O resource (usually a PCI BAR). For many situations, this number is either constant or irrelevant (due to pci_iomap convenience behavior). This change removes the io_size invariant member, and replaces it with a compile-time constant. Drivers updated: fealnx, gt96100eth, winbond-840, yellowfin Additionally, - gt96100eth: unused 'drv_flags' removed from gt96100eth - winbond-840: unused struct match_info removed - winbond-840: mark pci_id_tbl[] const, __devinitdata Signed-off-by: Jeff Garzik --- drivers/net/fealnx.c | 7 +++---- drivers/net/gt96100eth.c | 3 +-- drivers/net/gt96100eth.h | 2 -- drivers/net/tulip/winbond-840.c | 29 +++++++++++++---------------- drivers/net/yellowfin.c | 9 +++++---- 5 files changed, 22 insertions(+), 28 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/fealnx.c b/drivers/net/fealnx.c index c701951dcd6..0e6a495549f 100644 --- a/drivers/net/fealnx.c +++ b/drivers/net/fealnx.c @@ -146,14 +146,13 @@ enum phy_type_flags { struct chip_info { char *chip_name; - int io_size; int flags; }; static const struct chip_info skel_netdrv_tbl[] = { - {"100/10M Ethernet PCI Adapter", 136, HAS_MII_XCVR}, - {"100/10M Ethernet PCI Adapter", 136, HAS_CHIP_XCVR}, - {"1000/100/10M Ethernet PCI Adapter", 136, HAS_MII_XCVR}, + { "100/10M Ethernet PCI Adapter", HAS_MII_XCVR }, + { "100/10M Ethernet PCI Adapter", HAS_CHIP_XCVR }, + { "1000/100/10M Ethernet PCI Adapter", HAS_MII_XCVR }, }; /* Offsets to the Command and Status Registers. */ diff --git a/drivers/net/gt96100eth.c b/drivers/net/gt96100eth.c index 49dacc6e35a..2b4db741447 100644 --- a/drivers/net/gt96100eth.c +++ b/drivers/net/gt96100eth.c @@ -699,7 +699,6 @@ static int __init gt96100_probe1(struct pci_dev *pci, int port_num) memset(gp, 0, sizeof(*gp)); // clear it gp->port_num = port_num; - gp->io_size = GT96100_ETH_IO_SIZE; gp->port_offset = port_num * GT96100_ETH_IO_SIZE; gp->phy_addr = phy_addr; gp->chip_rev = chip_rev; @@ -1531,7 +1530,7 @@ static void gt96100_cleanup_module(void) + sizeof(gt96100_td_t) * TX_RING_SIZE, gp->rx_ring); free_netdev(gtif->dev); - release_region(gtif->iobase, gp->io_size); + release_region(gtif->iobase, GT96100_ETH_IO_SIZE); } } } diff --git a/drivers/net/gt96100eth.h b/drivers/net/gt96100eth.h index 2a8331938b8..3b62a87c7d7 100644 --- a/drivers/net/gt96100eth.h +++ b/drivers/net/gt96100eth.h @@ -331,7 +331,6 @@ struct gt96100_private { mib_counters_t mib; struct net_device_stats stats; - int io_size; int port_num; // 0 or 1 int chip_rev; u32 port_offset; @@ -340,7 +339,6 @@ struct gt96100_private { u32 last_psr; // last value of the port status register int options; /* User-settable misc. driver options. */ - int drv_flags; struct timer_list timer; spinlock_t lock; /* Serialise access to device */ }; diff --git a/drivers/net/tulip/winbond-840.c b/drivers/net/tulip/winbond-840.c index b4c0d101a7d..7f414815cc6 100644 --- a/drivers/net/tulip/winbond-840.c +++ b/drivers/net/tulip/winbond-840.c @@ -224,24 +224,21 @@ static const struct pci_device_id w840_pci_tbl[] = { }; MODULE_DEVICE_TABLE(pci, w840_pci_tbl); +enum { + netdev_res_size = 128, /* size of PCI BAR resource */ +}; + struct pci_id_info { const char *name; - struct match_info { - int pci, pci_mask, subsystem, subsystem_mask; - int revision, revision_mask; /* Only 8 bits. */ - } id; - int io_size; /* Needed for I/O region check or ioremap(). */ - int drv_flags; /* Driver use, intended as capability flags. */ + int drv_flags; /* Driver use, intended as capability flags. */ }; -static struct pci_id_info pci_id_tbl[] = { - {"Winbond W89c840", /* Sometime a Level-One switch card. */ - { 0x08401050, 0xffffffff, 0x81530000, 0xffff0000 }, - 128, CanHaveMII | HasBrokenTx | FDXOnNoMII}, - {"Winbond W89c840", { 0x08401050, 0xffffffff, }, - 128, CanHaveMII | HasBrokenTx}, - {"Compex RL100-ATX", { 0x201111F6, 0xffffffff,}, - 128, CanHaveMII | HasBrokenTx}, - {NULL,}, /* 0 terminated list. */ + +static const struct pci_id_info pci_id_tbl[] __devinitdata = { + { /* Sometime a Level-One switch card. */ + "Winbond W89c840", CanHaveMII | HasBrokenTx | FDXOnNoMII}, + { "Winbond W89c840", CanHaveMII | HasBrokenTx}, + { "Compex RL100-ATX", CanHaveMII | HasBrokenTx}, + { } /* terminate list. */ }; /* This driver was written to use PCI memory space, however some x86 systems @@ -399,7 +396,7 @@ static int __devinit w840_probe1 (struct pci_dev *pdev, #ifdef USE_IO_OPS bar = 0; #endif - ioaddr = pci_iomap(pdev, bar, pci_id_tbl[chip_idx].io_size); + ioaddr = pci_iomap(pdev, bar, netdev_res_size); if (!ioaddr) goto err_out_free_res; diff --git a/drivers/net/yellowfin.c b/drivers/net/yellowfin.c index 207340fe8df..8459a18254a 100644 --- a/drivers/net/yellowfin.c +++ b/drivers/net/yellowfin.c @@ -215,8 +215,11 @@ enum capability_flags { HasMACAddrBug=32, /* Only on early revs. */ DontUseEeprom=64, /* Don't read the MAC from the EEPROm. */ }; + /* The PCI I/O space extent. */ -#define YELLOWFIN_SIZE 0x100 +enum { + YELLOWFIN_SIZE = 0x100, +}; struct pci_id_info { const char *name; @@ -224,16 +227,14 @@ struct pci_id_info { int pci, pci_mask, subsystem, subsystem_mask; int revision, revision_mask; /* Only 8 bits. */ } id; - int io_size; /* Needed for I/O region check or ioremap(). */ int drv_flags; /* Driver use, intended as capability flags. */ }; static const struct pci_id_info pci_id_tbl[] = { {"Yellowfin G-NIC Gigabit Ethernet", { 0x07021000, 0xffffffff}, - YELLOWFIN_SIZE, FullTxStatus | IsGigabit | HasMulticastBug | HasMACAddrBug | DontUseEeprom}, {"Symbios SYM83C885", { 0x07011000, 0xffffffff}, - YELLOWFIN_SIZE, HasMII | DontUseEeprom }, + HasMII | DontUseEeprom }, { } }; -- cgit v1.2.3-70-g09d2 From 8ab6f3f706f5cb91bc0793afc95c8809837ece05 Mon Sep 17 00:00:00 2001 From: Jeff Garzik Date: Tue, 27 Jun 2006 08:56:23 -0400 Subject: [netdrvr] via-velocity: use netdev_priv() where appropriate Signed-off-by: Jeff Garzik --- drivers/net/via-velocity.c | 38 +++++++++++++++++++------------------- 1 file changed, 19 insertions(+), 19 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/via-velocity.c b/drivers/net/via-velocity.c index ba2972ba375..bbab3972ff8 100644 --- a/drivers/net/via-velocity.c +++ b/drivers/net/via-velocity.c @@ -341,7 +341,7 @@ static char __devinit *get_chip_name(enum chip_type chip_id) static void __devexit velocity_remove1(struct pci_dev *pdev) { struct net_device *dev = pci_get_drvdata(pdev); - struct velocity_info *vptr = dev->priv; + struct velocity_info *vptr = netdev_priv(dev); #ifdef CONFIG_PM unsigned long flags; @@ -708,7 +708,7 @@ static int __devinit velocity_found1(struct pci_dev *pdev, const struct pci_devi SET_MODULE_OWNER(dev); SET_NETDEV_DEV(dev, &pdev->dev); - vptr = dev->priv; + vptr = netdev_priv(dev); if (first) { @@ -1728,7 +1728,7 @@ static void velocity_free_tx_buf(struct velocity_info *vptr, struct velocity_td_ static int velocity_open(struct net_device *dev) { - struct velocity_info *vptr = dev->priv; + struct velocity_info *vptr = netdev_priv(dev); int ret; vptr->rx_buf_sz = (dev->mtu <= 1504 ? PKT_BUF_SZ : dev->mtu + 32); @@ -1785,7 +1785,7 @@ err_free_desc_rings: static int velocity_change_mtu(struct net_device *dev, int new_mtu) { - struct velocity_info *vptr = dev->priv; + struct velocity_info *vptr = netdev_priv(dev); unsigned long flags; int oldmtu = dev->mtu; int ret = 0; @@ -1861,7 +1861,7 @@ static void velocity_shutdown(struct velocity_info *vptr) static int velocity_close(struct net_device *dev) { - struct velocity_info *vptr = dev->priv; + struct velocity_info *vptr = netdev_priv(dev); netif_stop_queue(dev); velocity_shutdown(vptr); @@ -1894,7 +1894,7 @@ static int velocity_close(struct net_device *dev) static int velocity_xmit(struct sk_buff *skb, struct net_device *dev) { - struct velocity_info *vptr = dev->priv; + struct velocity_info *vptr = netdev_priv(dev); int qnum = 0; struct tx_desc *td_ptr; struct velocity_td_info *tdinfo; @@ -2049,7 +2049,7 @@ static int velocity_xmit(struct sk_buff *skb, struct net_device *dev) static int velocity_intr(int irq, void *dev_instance, struct pt_regs *regs) { struct net_device *dev = dev_instance; - struct velocity_info *vptr = dev->priv; + struct velocity_info *vptr = netdev_priv(dev); u32 isr_status; int max_count = 0; @@ -2104,7 +2104,7 @@ static int velocity_intr(int irq, void *dev_instance, struct pt_regs *regs) static void velocity_set_multi(struct net_device *dev) { - struct velocity_info *vptr = dev->priv; + struct velocity_info *vptr = netdev_priv(dev); struct mac_regs __iomem * regs = vptr->mac_regs; u8 rx_mode; int i; @@ -2153,7 +2153,7 @@ static void velocity_set_multi(struct net_device *dev) static struct net_device_stats *velocity_get_stats(struct net_device *dev) { - struct velocity_info *vptr = dev->priv; + struct velocity_info *vptr = netdev_priv(dev); /* If the hardware is down, don't touch MII */ if(!netif_running(dev)) @@ -2196,7 +2196,7 @@ static struct net_device_stats *velocity_get_stats(struct net_device *dev) static int velocity_ioctl(struct net_device *dev, struct ifreq *rq, int cmd) { - struct velocity_info *vptr = dev->priv; + struct velocity_info *vptr = netdev_priv(dev); int ret; /* If we are asked for information and the device is power @@ -2825,7 +2825,7 @@ static void enable_flow_control_ability(struct velocity_info *vptr) static int velocity_ethtool_up(struct net_device *dev) { - struct velocity_info *vptr = dev->priv; + struct velocity_info *vptr = netdev_priv(dev); if (!netif_running(dev)) pci_set_power_state(vptr->pdev, PCI_D0); return 0; @@ -2841,14 +2841,14 @@ static int velocity_ethtool_up(struct net_device *dev) static void velocity_ethtool_down(struct net_device *dev) { - struct velocity_info *vptr = dev->priv; + struct velocity_info *vptr = netdev_priv(dev); if (!netif_running(dev)) pci_set_power_state(vptr->pdev, PCI_D3hot); } static int velocity_get_settings(struct net_device *dev, struct ethtool_cmd *cmd) { - struct velocity_info *vptr = dev->priv; + struct velocity_info *vptr = netdev_priv(dev); struct mac_regs __iomem * regs = vptr->mac_regs; u32 status; status = check_connection_type(vptr->mac_regs); @@ -2873,7 +2873,7 @@ static int velocity_get_settings(struct net_device *dev, struct ethtool_cmd *cmd static int velocity_set_settings(struct net_device *dev, struct ethtool_cmd *cmd) { - struct velocity_info *vptr = dev->priv; + struct velocity_info *vptr = netdev_priv(dev); u32 curr_status; u32 new_status = 0; int ret = 0; @@ -2896,14 +2896,14 @@ static int velocity_set_settings(struct net_device *dev, struct ethtool_cmd *cmd static u32 velocity_get_link(struct net_device *dev) { - struct velocity_info *vptr = dev->priv; + struct velocity_info *vptr = netdev_priv(dev); struct mac_regs __iomem * regs = vptr->mac_regs; return BYTE_REG_BITS_IS_ON(PHYSR0_LINKGD, ®s->PHYSR0) ? 0 : 1; } static void velocity_get_drvinfo(struct net_device *dev, struct ethtool_drvinfo *info) { - struct velocity_info *vptr = dev->priv; + struct velocity_info *vptr = netdev_priv(dev); strcpy(info->driver, VELOCITY_NAME); strcpy(info->version, VELOCITY_VERSION); strcpy(info->bus_info, pci_name(vptr->pdev)); @@ -2911,7 +2911,7 @@ static void velocity_get_drvinfo(struct net_device *dev, struct ethtool_drvinfo static void velocity_ethtool_get_wol(struct net_device *dev, struct ethtool_wolinfo *wol) { - struct velocity_info *vptr = dev->priv; + struct velocity_info *vptr = netdev_priv(dev); wol->supported = WAKE_PHY | WAKE_MAGIC | WAKE_UCAST | WAKE_ARP; wol->wolopts |= WAKE_MAGIC; /* @@ -2927,7 +2927,7 @@ static void velocity_ethtool_get_wol(struct net_device *dev, struct ethtool_woli static int velocity_ethtool_set_wol(struct net_device *dev, struct ethtool_wolinfo *wol) { - struct velocity_info *vptr = dev->priv; + struct velocity_info *vptr = netdev_priv(dev); if (!(wol->wolopts & (WAKE_PHY | WAKE_MAGIC | WAKE_UCAST | WAKE_ARP))) return -EFAULT; @@ -2992,7 +2992,7 @@ static struct ethtool_ops velocity_ethtool_ops = { static int velocity_mii_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd) { - struct velocity_info *vptr = dev->priv; + struct velocity_info *vptr = netdev_priv(dev); struct mac_regs __iomem * regs = vptr->mac_regs; unsigned long flags; struct mii_ioctl_data *miidata = if_mii(ifr); -- cgit v1.2.3-70-g09d2 From 46009c8bcd5d7c9fcbfc17d0455a471bea5be4d4 Mon Sep 17 00:00:00 2001 From: Jeff Garzik Date: Tue, 27 Jun 2006 09:12:38 -0400 Subject: [netdrvr] minor cleanups in Becker-derived drivers - fealnx: convert #define to enum - fealnx, sundance: mark chip info table __devinitdata - fealnx: use dev_printk() during probe - fealnx: formatting cleanups - starfire: remove obsolete comment - sundance, via-rhine: add some whitespace where useful, in tables - sundance: prefer "{ }" table terminator - via-rhine: mark PCI probe table const Signed-off-by: Jeff Garzik --- drivers/net/fealnx.c | 13 ++++++++----- drivers/net/starfire.c | 1 - drivers/net/sundance.c | 22 +++++++++++----------- drivers/net/via-rhine.c | 11 +++++------ 4 files changed, 24 insertions(+), 23 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/fealnx.c b/drivers/net/fealnx.c index 0e6a495549f..aaf13665876 100644 --- a/drivers/net/fealnx.c +++ b/drivers/net/fealnx.c @@ -124,7 +124,9 @@ MODULE_PARM_DESC(multicast_filter_limit, "fealnx maximum number of filtered mult MODULE_PARM_DESC(options, "fealnx: Bits 0-3: media type, bit 17: full duplex"); MODULE_PARM_DESC(full_duplex, "fealnx full duplex setting(s) (1)"); -#define MIN_REGION_SIZE 136 +enum { + MIN_REGION_SIZE = 136, +}; /* A chip capabilities table, matching the entries in pci_tbl[] above. */ enum chip_capability_flags { @@ -149,7 +151,7 @@ struct chip_info { int flags; }; -static const struct chip_info skel_netdrv_tbl[] = { +static const struct chip_info skel_netdrv_tbl[] __devinitdata = { { "100/10M Ethernet PCI Adapter", HAS_MII_XCVR }, { "100/10M Ethernet PCI Adapter", HAS_CHIP_XCVR }, { "1000/100/10M Ethernet PCI Adapter", HAS_MII_XCVR }, @@ -503,13 +505,14 @@ static int __devinit fealnx_init_one(struct pci_dev *pdev, len = pci_resource_len(pdev, bar); if (len < MIN_REGION_SIZE) { - printk(KERN_ERR "%s: region size %ld too small, aborting\n", - boardname, len); + dev_printk(KERN_ERR, &pdev->dev, + "region size %ld too small, aborting\n", len); return -ENODEV; } i = pci_request_regions(pdev, boardname); - if (i) return i; + if (i) + return i; irq = pdev->irq; diff --git a/drivers/net/starfire.c b/drivers/net/starfire.c index 24d55b4591b..c0a62b00ffc 100644 --- a/drivers/net/starfire.c +++ b/drivers/net/starfire.c @@ -730,7 +730,6 @@ static int __devinit starfire_init_one(struct pci_dev *pdev, goto err_out_free_netdev; } - /* ioremap is borken in Linux-2.2.x/sparc64 */ base = ioremap(ioaddr, io_size); if (!base) { printk(KERN_ERR DRV_NAME " %d: cannot remap %#x @ %#lx, aborting\n", diff --git a/drivers/net/sundance.c b/drivers/net/sundance.c index de664519665..ac17377b3e9 100644 --- a/drivers/net/sundance.c +++ b/drivers/net/sundance.c @@ -204,15 +204,15 @@ IVc. Errata #define USE_IO_OPS 1 #endif -static struct pci_device_id sundance_pci_tbl[] = { - {0x1186, 0x1002, 0x1186, 0x1002, 0, 0, 0}, - {0x1186, 0x1002, 0x1186, 0x1003, 0, 0, 1}, - {0x1186, 0x1002, 0x1186, 0x1012, 0, 0, 2}, - {0x1186, 0x1002, 0x1186, 0x1040, 0, 0, 3}, - {0x1186, 0x1002, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4}, - {0x13F0, 0x0201, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 5}, - {0x13F0, 0x0200, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 6}, - {0,} +static const struct pci_device_id sundance_pci_tbl[] = { + { 0x1186, 0x1002, 0x1186, 0x1002, 0, 0, 0 }, + { 0x1186, 0x1002, 0x1186, 0x1003, 0, 0, 1 }, + { 0x1186, 0x1002, 0x1186, 0x1012, 0, 0, 2 }, + { 0x1186, 0x1002, 0x1186, 0x1040, 0, 0, 3 }, + { 0x1186, 0x1002, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4 }, + { 0x13F0, 0x0201, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 5 }, + { 0x13F0, 0x0200, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 6 }, + { } }; MODULE_DEVICE_TABLE(pci, sundance_pci_tbl); @@ -223,7 +223,7 @@ enum { struct pci_id_info { const char *name; }; -static const struct pci_id_info pci_id_tbl[] = { +static const struct pci_id_info pci_id_tbl[] __devinitdata = { {"D-Link DFE-550TX FAST Ethernet Adapter"}, {"D-Link DFE-550FX 100Mbps Fiber-optics Adapter"}, {"D-Link DFE-580TX 4 port Server Adapter"}, @@ -231,7 +231,7 @@ static const struct pci_id_info pci_id_tbl[] = { {"D-Link DL10050-based FAST Ethernet Adapter"}, {"Sundance Technology Alta"}, {"IC Plus Corporation IP100A FAST Ethernet Adapter"}, - {NULL,}, /* 0 terminated list. */ + { } /* terminate list. */ }; /* This driver was written to use PCI memory space, however x86-oriented diff --git a/drivers/net/via-rhine.c b/drivers/net/via-rhine.c index e48e76ce73a..d3d0ec97031 100644 --- a/drivers/net/via-rhine.c +++ b/drivers/net/via-rhine.c @@ -252,12 +252,11 @@ enum rhine_quirks { /* Beware of PCI posted writes */ #define IOSYNC do { ioread8(ioaddr + StationAddr); } while (0) -static struct pci_device_id rhine_pci_tbl[] = -{ - {0x1106, 0x3043, PCI_ANY_ID, PCI_ANY_ID, 0, 0, }, /* VT86C100A */ - {0x1106, 0x3065, PCI_ANY_ID, PCI_ANY_ID, 0, 0, }, /* VT6102 */ - {0x1106, 0x3106, PCI_ANY_ID, PCI_ANY_ID, 0, 0, }, /* 6105{,L,LOM} */ - {0x1106, 0x3053, PCI_ANY_ID, PCI_ANY_ID, 0, 0, }, /* VT6105M */ +static const struct pci_device_id rhine_pci_tbl[] = { + { 0x1106, 0x3043, PCI_ANY_ID, PCI_ANY_ID, }, /* VT86C100A */ + { 0x1106, 0x3065, PCI_ANY_ID, PCI_ANY_ID, }, /* VT6102 */ + { 0x1106, 0x3106, PCI_ANY_ID, PCI_ANY_ID, }, /* 6105{,L,LOM} */ + { 0x1106, 0x3053, PCI_ANY_ID, PCI_ANY_ID, }, /* VT6105M */ { } /* terminate list */ }; MODULE_DEVICE_TABLE(pci, rhine_pci_tbl); -- cgit v1.2.3-70-g09d2 From e54f48933f414fa447c26d16524a4c9a8e2facc6 Mon Sep 17 00:00:00 2001 From: Jeff Garzik Date: Tue, 27 Jun 2006 09:20:08 -0400 Subject: [netdrvr] via-velocity: misc. cleanups - const-ify pci_device_id table - clean up pci_device_id table with PCI_DEVICE() - don't store internal pointer in pci_device_id table, use pci_device_id::driver_data as an integer index - use dev_printk() for messages where eth%d prefix is unavailable - formatting fixes Signed-off-by: Jeff Garzik --- drivers/net/via-velocity.c | 48 +++++++++++++++++++++------------------------- 1 file changed, 22 insertions(+), 26 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/via-velocity.c b/drivers/net/via-velocity.c index bbab3972ff8..019dcf2457b 100644 --- a/drivers/net/via-velocity.c +++ b/drivers/net/via-velocity.c @@ -304,10 +304,9 @@ static struct velocity_info_tbl chip_info_table[] = { * device driver. Used for hotplug autoloading. */ -static struct pci_device_id velocity_id_table[] __devinitdata = { - {PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_612X, - PCI_ANY_ID, PCI_ANY_ID, 0, 0, (unsigned long) chip_info_table}, - {0, } +static const struct pci_device_id velocity_id_table[] __devinitdata = { + { PCI_DEVICE(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_612X) }, + { } }; MODULE_DEVICE_TABLE(pci, velocity_id_table); @@ -686,21 +685,23 @@ static int __devinit velocity_found1(struct pci_dev *pdev, const struct pci_devi static int first = 1; struct net_device *dev; int i; - struct velocity_info_tbl *info = (struct velocity_info_tbl *) ent->driver_data; + struct velocity_info_tbl *info = &chip_info_table[ent->driver_data]; struct velocity_info *vptr; struct mac_regs __iomem * regs; int ret = -ENOMEM; + /* FIXME: this driver, like almost all other ethernet drivers, + * can support more than MAX_UNITS. + */ if (velocity_nics >= MAX_UNITS) { - printk(KERN_NOTICE VELOCITY_NAME ": already found %d NICs.\n", - velocity_nics); + dev_printk(KERN_NOTICE, &pdev->dev, "already found %d NICs.\n", + velocity_nics); return -ENODEV; } dev = alloc_etherdev(sizeof(struct velocity_info)); - - if (dev == NULL) { - printk(KERN_ERR VELOCITY_NAME ": allocate net device failed.\n"); + if (!dev) { + dev_printk(KERN_ERR, &pdev->dev, "allocate net device failed.\n"); goto out; } @@ -731,13 +732,13 @@ static int __devinit velocity_found1(struct pci_dev *pdev, const struct pci_devi ret = velocity_get_pci_info(vptr, pdev); if (ret < 0) { - printk(KERN_ERR VELOCITY_NAME ": Failed to find PCI device.\n"); + /* error message already printed */ goto err_disable; } ret = pci_request_regions(pdev, VELOCITY_NAME); if (ret < 0) { - printk(KERN_ERR VELOCITY_NAME ": Failed to find PCI device.\n"); + dev_printk(KERN_ERR, &pdev->dev, "No PCI resources.\n"); goto err_disable; } @@ -883,8 +884,7 @@ static void __devinit velocity_init_info(struct pci_dev *pdev, struct velocity_i static int __devinit velocity_get_pci_info(struct velocity_info *vptr, struct pci_dev *pdev) { - - if(pci_read_config_byte(pdev, PCI_REVISION_ID, &vptr->rev_id) < 0) + if (pci_read_config_byte(pdev, PCI_REVISION_ID, &vptr->rev_id) < 0) return -EIO; pci_set_master(pdev); @@ -892,24 +892,20 @@ static int __devinit velocity_get_pci_info(struct velocity_info *vptr, struct pc vptr->ioaddr = pci_resource_start(pdev, 0); vptr->memaddr = pci_resource_start(pdev, 1); - if(!(pci_resource_flags(pdev, 0) & IORESOURCE_IO)) - { - printk(KERN_ERR "%s: region #0 is not an I/O resource, aborting.\n", - pci_name(pdev)); + if (!(pci_resource_flags(pdev, 0) & IORESOURCE_IO)) { + dev_printk(KERN_ERR, &pdev->dev, + "region #0 is not an I/O resource, aborting.\n"); return -EINVAL; } - if((pci_resource_flags(pdev, 1) & IORESOURCE_IO)) - { - printk(KERN_ERR "%s: region #1 is an I/O resource, aborting.\n", - pci_name(pdev)); + if ((pci_resource_flags(pdev, 1) & IORESOURCE_IO)) { + dev_printk(KERN_ERR, &pdev->dev, + "region #1 is an I/O resource, aborting.\n"); return -EINVAL; } - if(pci_resource_len(pdev, 1) < 256) - { - printk(KERN_ERR "%s: region #1 is too small.\n", - pci_name(pdev)); + if (pci_resource_len(pdev, 1) < 256) { + dev_printk(KERN_ERR, &pdev->dev, "region #1 is too small.\n"); return -EINVAL; } vptr->pdev = pdev; -- cgit v1.2.3-70-g09d2 From cabb7667dc150320ccd9d6f64fbd7a34766bc775 Mon Sep 17 00:00:00 2001 From: Jeff Garzik Date: Tue, 27 Jun 2006 09:25:28 -0400 Subject: [netdrvr] via-velocity: remove io_size struct member, it is invariant Replace io_size struct members with VELOCITY_IO_SIZE constant. Also, constify chip_info_table[]. Signed-off-by: Jeff Garzik --- drivers/net/via-velocity.c | 20 +++++++++++--------- drivers/net/via-velocity.h | 4 ++-- 2 files changed, 13 insertions(+), 11 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/via-velocity.c b/drivers/net/via-velocity.c index 019dcf2457b..7e3b2a31814 100644 --- a/drivers/net/via-velocity.c +++ b/drivers/net/via-velocity.c @@ -229,7 +229,8 @@ static int rx_copybreak = 200; module_param(rx_copybreak, int, 0644); MODULE_PARM_DESC(rx_copybreak, "Copy breakpoint for copy-only-tiny-frames"); -static void velocity_init_info(struct pci_dev *pdev, struct velocity_info *vptr, struct velocity_info_tbl *info); +static void velocity_init_info(struct pci_dev *pdev, struct velocity_info *vptr, + const struct velocity_info_tbl *info); static int velocity_get_pci_info(struct velocity_info *, struct pci_dev *pdev); static void velocity_print_info(struct velocity_info *vptr); static int velocity_open(struct net_device *dev); @@ -294,9 +295,9 @@ static void velocity_unregister_notifier(void) * Internal board variants. At the moment we have only one */ -static struct velocity_info_tbl chip_info_table[] = { - {CHIP_TYPE_VT6110, "VIA Networking Velocity Family Gigabit Ethernet Adapter", 256, 1, 0x00FFFFFFUL}, - {0, NULL} +static const struct velocity_info_tbl chip_info_table[] __devinitdata = { + {CHIP_TYPE_VT6110, "VIA Networking Velocity Family Gigabit Ethernet Adapter", 1, 0x00FFFFFFUL}, + { } }; /* @@ -685,7 +686,7 @@ static int __devinit velocity_found1(struct pci_dev *pdev, const struct pci_devi static int first = 1; struct net_device *dev; int i; - struct velocity_info_tbl *info = &chip_info_table[ent->driver_data]; + const struct velocity_info_tbl *info = &chip_info_table[ent->driver_data]; struct velocity_info *vptr; struct mac_regs __iomem * regs; int ret = -ENOMEM; @@ -742,7 +743,7 @@ static int __devinit velocity_found1(struct pci_dev *pdev, const struct pci_devi goto err_disable; } - regs = ioremap(vptr->memaddr, vptr->io_size); + regs = ioremap(vptr->memaddr, VELOCITY_IO_SIZE); if (regs == NULL) { ret = -EIO; goto err_release_res; @@ -860,13 +861,14 @@ static void __devinit velocity_print_info(struct velocity_info *vptr) * discovered. */ -static void __devinit velocity_init_info(struct pci_dev *pdev, struct velocity_info *vptr, struct velocity_info_tbl *info) +static void __devinit velocity_init_info(struct pci_dev *pdev, + struct velocity_info *vptr, + const struct velocity_info_tbl *info) { memset(vptr, 0, sizeof(struct velocity_info)); vptr->pdev = pdev; vptr->chip_id = info->chip_id; - vptr->io_size = info->io_size; vptr->num_txq = info->txqueue; vptr->multicast_limit = MCAM_SIZE; spin_lock_init(&vptr->lock); @@ -904,7 +906,7 @@ static int __devinit velocity_get_pci_info(struct velocity_info *vptr, struct pc return -EINVAL; } - if (pci_resource_len(pdev, 1) < 256) { + if (pci_resource_len(pdev, 1) < VELOCITY_IO_SIZE) { dev_printk(KERN_ERR, &pdev->dev, "region #1 is too small.\n"); return -EINVAL; } diff --git a/drivers/net/via-velocity.h b/drivers/net/via-velocity.h index f1b2640ebdc..496c3d59744 100644 --- a/drivers/net/via-velocity.h +++ b/drivers/net/via-velocity.h @@ -31,6 +31,8 @@ #define VELOCITY_FULL_DRV_NAM "VIA Networking Velocity Family Gigabit Ethernet Adapter Driver" #define VELOCITY_VERSION "1.13" +#define VELOCITY_IO_SIZE 256 + #define PKT_BUF_SZ 1540 #define MAX_UNITS 8 @@ -1191,7 +1193,6 @@ enum chip_type { struct velocity_info_tbl { enum chip_type chip_id; char *name; - int io_size; int txqueue; u32 flags; }; @@ -1751,7 +1752,6 @@ struct velocity_info { struct mac_regs __iomem * mac_regs; unsigned long memaddr; unsigned long ioaddr; - u32 io_size; u8 rev_id; -- cgit v1.2.3-70-g09d2 From 2e8a538d865de0eb9813c8a0f2284e920299c0cc Mon Sep 17 00:00:00 2001 From: Jeff Garzik Date: Tue, 27 Jun 2006 10:47:51 -0400 Subject: [netdrvr] Use dev_printk() when ethernet interface isn't available For messages prior to register_netdev(), prefer dev_printk() because that prints out both our driver name and our [PCI | whatever] bus id. Updates: 8139{cp,too}, b44, bnx2, cassini, {eepro,epic}100, fealnx, hamachi, ne2k-pci, ns83820, pci-skeleton, r8169. Signed-off-by: Jeff Garzik --- drivers/net/8139cp.c | 38 ++++++++++++++++++++++---------------- drivers/net/8139too.c | 41 +++++++++++++++++++++++++---------------- drivers/net/b44.c | 28 +++++++++++++++------------- drivers/net/bnx2.c | 37 ++++++++++++++++++++++--------------- drivers/net/cassini.c | 20 ++++++++++---------- drivers/net/eepro100.c | 8 +++++--- drivers/net/epic100.c | 23 ++++++++++++----------- drivers/net/fealnx.c | 17 +++++++++-------- drivers/net/hamachi.c | 3 ++- drivers/net/ne2k-pci.c | 12 ++++++++---- drivers/net/ns83820.c | 14 +++++++++----- drivers/net/pci-skeleton.c | 24 +++++++++++++++--------- drivers/net/r8169.c | 43 +++++++++++++++++++------------------------ 13 files changed, 173 insertions(+), 135 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/8139cp.c b/drivers/net/8139cp.c index 1959654cbec..93b7c904bba 100644 --- a/drivers/net/8139cp.c +++ b/drivers/net/8139cp.c @@ -1836,9 +1836,11 @@ static int cp_init_one (struct pci_dev *pdev, const struct pci_device_id *ent) if (pdev->vendor == PCI_VENDOR_ID_REALTEK && pdev->device == PCI_DEVICE_ID_REALTEK_8139 && pci_rev < 0x20) { - printk(KERN_ERR PFX "pci dev %s (id %04x:%04x rev %02x) is not an 8139C+ compatible chip\n", - pci_name(pdev), pdev->vendor, pdev->device, pci_rev); - printk(KERN_ERR PFX "Try the \"8139too\" driver instead.\n"); + dev_printk(KERN_ERR, &pdev->dev, + "This (id %04x:%04x rev %02x) is not an 8139C+ compatible chip\n", + pdev->vendor, pdev->device, pci_rev); + dev_printk(KERN_ERR, &pdev->dev, + "Try the \"8139too\" driver instead.\n"); return -ENODEV; } @@ -1876,14 +1878,14 @@ static int cp_init_one (struct pci_dev *pdev, const struct pci_device_id *ent) pciaddr = pci_resource_start(pdev, 1); if (!pciaddr) { rc = -EIO; - printk(KERN_ERR PFX "no MMIO resource for pci dev %s\n", - pci_name(pdev)); + dev_printk(KERN_ERR, &pdev->dev, "no MMIO resource\n"); goto err_out_res; } if (pci_resource_len(pdev, 1) < CP_REGS_SIZE) { rc = -EIO; - printk(KERN_ERR PFX "MMIO resource (%llx) too small on pci dev %s\n", - (unsigned long long)pci_resource_len(pdev, 1), pci_name(pdev)); + dev_printk(KERN_ERR, &pdev->dev, + "MMIO resource (%llx) too small\n", + (unsigned long long)pci_resource_len(pdev, 1)); goto err_out_res; } @@ -1897,14 +1899,15 @@ static int cp_init_one (struct pci_dev *pdev, const struct pci_device_id *ent) rc = pci_set_dma_mask(pdev, DMA_32BIT_MASK); if (rc) { - printk(KERN_ERR PFX "No usable DMA configuration, " - "aborting.\n"); + dev_printk(KERN_ERR, &pdev->dev, + "No usable DMA configuration, aborting.\n"); goto err_out_res; } rc = pci_set_consistent_dma_mask(pdev, DMA_32BIT_MASK); if (rc) { - printk(KERN_ERR PFX "No usable consistent DMA configuration, " - "aborting.\n"); + dev_printk(KERN_ERR, &pdev->dev, + "No usable consistent DMA configuration, " + "aborting.\n"); goto err_out_res; } } @@ -1915,9 +1918,10 @@ static int cp_init_one (struct pci_dev *pdev, const struct pci_device_id *ent) regs = ioremap(pciaddr, CP_REGS_SIZE); if (!regs) { rc = -EIO; - printk(KERN_ERR PFX "Cannot map PCI MMIO (%llx@%llx) on pci dev %s\n", - (unsigned long long)pci_resource_len(pdev, 1), - (unsigned long long)pciaddr, pci_name(pdev)); + dev_printk(KERN_ERR, &pdev->dev, + "Cannot map PCI MMIO (%llx@%llx)\n", + (unsigned long long)pci_resource_len(pdev, 1), + (unsigned long long)pciaddr); goto err_out_res; } dev->base_addr = (unsigned long) regs; @@ -1986,7 +1990,8 @@ static int cp_init_one (struct pci_dev *pdev, const struct pci_device_id *ent) /* enable busmastering and memory-write-invalidate */ pci_set_master(pdev); - if (cp->wol_enabled) cp_set_d3_state (cp); + if (cp->wol_enabled) + cp_set_d3_state (cp); return 0; @@ -2011,7 +2016,8 @@ static void cp_remove_one (struct pci_dev *pdev) BUG_ON(!dev); unregister_netdev(dev); iounmap(cp->regs); - if (cp->wol_enabled) pci_set_power_state (pdev, PCI_D0); + if (cp->wol_enabled) + pci_set_power_state (pdev, PCI_D0); pci_release_regions(pdev); pci_clear_mwi(pdev); pci_disable_device(pdev); diff --git a/drivers/net/8139too.c b/drivers/net/8139too.c index 717506b2b13..5e9ef52a5ca 100644 --- a/drivers/net/8139too.c +++ b/drivers/net/8139too.c @@ -768,7 +768,8 @@ static int __devinit rtl8139_init_board (struct pci_dev *pdev, /* dev and priv zeroed in alloc_etherdev */ dev = alloc_etherdev (sizeof (*tp)); if (dev == NULL) { - printk (KERN_ERR PFX "%s: Unable to alloc new net device\n", pci_name(pdev)); + dev_printk (KERN_ERR, &pdev->dev, + "Unable to alloc new net device\n"); return -ENOMEM; } SET_MODULE_OWNER(dev); @@ -800,31 +801,35 @@ static int __devinit rtl8139_init_board (struct pci_dev *pdev, #ifdef USE_IO_OPS /* make sure PCI base addr 0 is PIO */ if (!(pio_flags & IORESOURCE_IO)) { - printk (KERN_ERR PFX "%s: region #0 not a PIO resource, aborting\n", pci_name(pdev)); + dev_printk (KERN_ERR, &pdev->dev, + "region #0 not a PIO resource, aborting\n"); rc = -ENODEV; goto err_out; } /* check for weird/broken PCI region reporting */ if (pio_len < RTL_MIN_IO_SIZE) { - printk (KERN_ERR PFX "%s: Invalid PCI I/O region size(s), aborting\n", pci_name(pdev)); + dev_printk (KERN_ERR, &pdev->dev, + "Invalid PCI I/O region size(s), aborting\n"); rc = -ENODEV; goto err_out; } #else /* make sure PCI base addr 1 is MMIO */ if (!(mmio_flags & IORESOURCE_MEM)) { - printk (KERN_ERR PFX "%s: region #1 not an MMIO resource, aborting\n", pci_name(pdev)); + dev_printk (KERN_ERR, &pdev->dev, + "region #1 not an MMIO resource, aborting\n"); rc = -ENODEV; goto err_out; } if (mmio_len < RTL_MIN_IO_SIZE) { - printk (KERN_ERR PFX "%s: Invalid PCI mem region size(s), aborting\n", pci_name(pdev)); + dev_printk (KERN_ERR, &pdev->dev, + "Invalid PCI mem region size(s), aborting\n"); rc = -ENODEV; goto err_out; } #endif - rc = pci_request_regions (pdev, "8139too"); + rc = pci_request_regions (pdev, DRV_NAME); if (rc) goto err_out; disable_dev_on_err = 1; @@ -835,7 +840,7 @@ static int __devinit rtl8139_init_board (struct pci_dev *pdev, #ifdef USE_IO_OPS ioaddr = ioport_map(pio_start, pio_len); if (!ioaddr) { - printk (KERN_ERR PFX "%s: cannot map PIO, aborting\n", pci_name(pdev)); + dev_printk (KERN_ERR, &pdev->dev, "cannot map PIO, aborting\n"); rc = -EIO; goto err_out; } @@ -846,7 +851,8 @@ static int __devinit rtl8139_init_board (struct pci_dev *pdev, /* ioremap MMIO region */ ioaddr = pci_iomap(pdev, 1, 0); if (ioaddr == NULL) { - printk (KERN_ERR PFX "%s: cannot remap MMIO, aborting\n", pci_name(pdev)); + dev_printk (KERN_ERR, &pdev->dev, + "cannot remap MMIO, aborting\n"); rc = -EIO; goto err_out; } @@ -860,8 +866,8 @@ static int __devinit rtl8139_init_board (struct pci_dev *pdev, /* check for missing/broken hardware */ if (RTL_R32 (TxConfig) == 0xFFFFFFFF) { - printk (KERN_ERR PFX "%s: Chip not responding, ignoring board\n", - pci_name(pdev)); + dev_printk (KERN_ERR, &pdev->dev, + "Chip not responding, ignoring board\n"); rc = -EIO; goto err_out; } @@ -875,9 +881,10 @@ static int __devinit rtl8139_init_board (struct pci_dev *pdev, } /* if unknown chip, assume array element #0, original RTL-8139 in this case */ - printk (KERN_DEBUG PFX "%s: unknown chip version, assuming RTL-8139\n", - pci_name(pdev)); - printk (KERN_DEBUG PFX "%s: TxConfig = 0x%lx\n", pci_name(pdev), RTL_R32 (TxConfig)); + dev_printk (KERN_DEBUG, &pdev->dev, + "unknown chip version, assuming RTL-8139\n"); + dev_printk (KERN_DEBUG, &pdev->dev, + "TxConfig = 0x%lx\n", RTL_R32 (TxConfig)); tp->chipset = 0; match: @@ -954,9 +961,11 @@ static int __devinit rtl8139_init_one (struct pci_dev *pdev, if (pdev->vendor == PCI_VENDOR_ID_REALTEK && pdev->device == PCI_DEVICE_ID_REALTEK_8139 && pci_rev >= 0x20) { - printk(KERN_INFO PFX "pci dev %s (id %04x:%04x rev %02x) is an enhanced 8139C+ chip\n", - pci_name(pdev), pdev->vendor, pdev->device, pci_rev); - printk(KERN_INFO PFX "Use the \"8139cp\" driver for improved performance and stability.\n"); + dev_printk(KERN_INFO, &pdev->dev, + "This (id %04x:%04x rev %02x) is an enhanced 8139C+ chip\n", + pdev->vendor, pdev->device, pci_rev); + dev_printk(KERN_INFO, &pdev->dev, + "Use the \"8139cp\" driver for improved performance and stability.\n"); } i = rtl8139_init_board (pdev, &dev); diff --git a/drivers/net/b44.c b/drivers/net/b44.c index cd98d31dee8..5815e3dc125 100644 --- a/drivers/net/b44.c +++ b/drivers/net/b44.c @@ -2120,13 +2120,14 @@ static int __devinit b44_init_one(struct pci_dev *pdev, err = pci_enable_device(pdev); if (err) { - printk(KERN_ERR PFX "Cannot enable PCI device, " + dev_printk(KERN_ERR, &pdev->dev, "Cannot enable PCI device, " "aborting.\n"); return err; } if (!(pci_resource_flags(pdev, 0) & IORESOURCE_MEM)) { - printk(KERN_ERR PFX "Cannot find proper PCI device " + dev_printk(KERN_ERR, &pdev->dev, + "Cannot find proper PCI device " "base address, aborting.\n"); err = -ENODEV; goto err_out_disable_pdev; @@ -2134,8 +2135,8 @@ static int __devinit b44_init_one(struct pci_dev *pdev, err = pci_request_regions(pdev, DRV_MODULE_NAME); if (err) { - printk(KERN_ERR PFX "Cannot obtain PCI resources, " - "aborting.\n"); + dev_printk(KERN_ERR, &pdev->dev, + "Cannot obtain PCI resources, aborting.\n"); goto err_out_disable_pdev; } @@ -2143,15 +2144,15 @@ static int __devinit b44_init_one(struct pci_dev *pdev, err = pci_set_dma_mask(pdev, (u64) B44_DMA_MASK); if (err) { - printk(KERN_ERR PFX "No usable DMA configuration, " - "aborting.\n"); + dev_printk(KERN_ERR, &pdev->dev, + "No usable DMA configuration, aborting.\n"); goto err_out_free_res; } err = pci_set_consistent_dma_mask(pdev, (u64) B44_DMA_MASK); if (err) { - printk(KERN_ERR PFX "No usable DMA configuration, " - "aborting.\n"); + dev_printk(KERN_ERR, &pdev->dev, + "No usable DMA configuration, aborting.\n"); goto err_out_free_res; } @@ -2160,7 +2161,8 @@ static int __devinit b44_init_one(struct pci_dev *pdev, dev = alloc_etherdev(sizeof(*bp)); if (!dev) { - printk(KERN_ERR PFX "Etherdev alloc failed, aborting.\n"); + dev_printk(KERN_ERR, &pdev->dev, + "Etherdev alloc failed, aborting.\n"); err = -ENOMEM; goto err_out_free_res; } @@ -2181,7 +2183,7 @@ static int __devinit b44_init_one(struct pci_dev *pdev, bp->regs = ioremap(b44reg_base, b44reg_len); if (bp->regs == 0UL) { - printk(KERN_ERR PFX "Cannot map device registers, " + dev_printk(KERN_ERR, &pdev->dev, "Cannot map device registers, " "aborting.\n"); err = -ENOMEM; goto err_out_free_dev; @@ -2212,8 +2214,8 @@ static int __devinit b44_init_one(struct pci_dev *pdev, err = b44_get_invariants(bp); if (err) { - printk(KERN_ERR PFX "Problem fetching invariants of chip, " - "aborting.\n"); + dev_printk(KERN_ERR, &pdev->dev, + "Problem fetching invariants of chip, aborting.\n"); goto err_out_iounmap; } @@ -2233,7 +2235,7 @@ static int __devinit b44_init_one(struct pci_dev *pdev, err = register_netdev(dev); if (err) { - printk(KERN_ERR PFX "Cannot register net device, " + dev_printk(KERN_ERR, &pdev->dev, "Cannot register net device, " "aborting.\n"); goto err_out_iounmap; } diff --git a/drivers/net/bnx2.c b/drivers/net/bnx2.c index 4f4db5ae503..5502b9aeda5 100644 --- a/drivers/net/bnx2.c +++ b/drivers/net/bnx2.c @@ -5575,20 +5575,22 @@ bnx2_init_board(struct pci_dev *pdev, struct net_device *dev) /* enable device (incl. PCI PM wakeup), and bus-mastering */ rc = pci_enable_device(pdev); if (rc) { - printk(KERN_ERR PFX "Cannot enable PCI device, aborting."); + dev_printk(KERN_ERR, &pdev->dev, + "Cannot enable PCI device, aborting."); goto err_out; } if (!(pci_resource_flags(pdev, 0) & IORESOURCE_MEM)) { - printk(KERN_ERR PFX "Cannot find PCI device base address, " - "aborting.\n"); + dev_printk(KERN_ERR, &pdev->dev, + "Cannot find PCI device base address, aborting.\n"); rc = -ENODEV; goto err_out_disable; } rc = pci_request_regions(pdev, DRV_MODULE_NAME); if (rc) { - printk(KERN_ERR PFX "Cannot obtain PCI resources, aborting.\n"); + dev_printk(KERN_ERR, &pdev->dev, + "Cannot obtain PCI resources, aborting.\n"); goto err_out_disable; } @@ -5596,15 +5598,16 @@ bnx2_init_board(struct pci_dev *pdev, struct net_device *dev) bp->pm_cap = pci_find_capability(pdev, PCI_CAP_ID_PM); if (bp->pm_cap == 0) { - printk(KERN_ERR PFX "Cannot find power management capability, " - "aborting.\n"); + dev_printk(KERN_ERR, &pdev->dev, + "Cannot find power management capability, aborting.\n"); rc = -EIO; goto err_out_release; } bp->pcix_cap = pci_find_capability(pdev, PCI_CAP_ID_PCIX); if (bp->pcix_cap == 0) { - printk(KERN_ERR PFX "Cannot find PCIX capability, aborting.\n"); + dev_printk(KERN_ERR, &pdev->dev, + "Cannot find PCIX capability, aborting.\n"); rc = -EIO; goto err_out_release; } @@ -5612,14 +5615,15 @@ bnx2_init_board(struct pci_dev *pdev, struct net_device *dev) if (pci_set_dma_mask(pdev, DMA_64BIT_MASK) == 0) { bp->flags |= USING_DAC_FLAG; if (pci_set_consistent_dma_mask(pdev, DMA_64BIT_MASK) != 0) { - printk(KERN_ERR PFX "pci_set_consistent_dma_mask " - "failed, aborting.\n"); + dev_printk(KERN_ERR, &pdev->dev, + "pci_set_consistent_dma_mask failed, aborting.\n"); rc = -EIO; goto err_out_release; } } else if (pci_set_dma_mask(pdev, DMA_32BIT_MASK) != 0) { - printk(KERN_ERR PFX "System does not support DMA, aborting.\n"); + dev_printk(KERN_ERR, &pdev->dev, + "System does not support DMA, aborting.\n"); rc = -EIO; goto err_out_release; } @@ -5639,7 +5643,8 @@ bnx2_init_board(struct pci_dev *pdev, struct net_device *dev) bp->regview = ioremap_nocache(dev->base_addr, mem_len); if (!bp->regview) { - printk(KERN_ERR PFX "Cannot map register space, aborting.\n"); + dev_printk(KERN_ERR, &pdev->dev, + "Cannot map register space, aborting.\n"); rc = -ENOMEM; goto err_out_release; } @@ -5711,8 +5716,8 @@ bnx2_init_board(struct pci_dev *pdev, struct net_device *dev) else if ((CHIP_ID(bp) == CHIP_ID_5706_A1) && !(bp->flags & PCIX_FLAG)) { - printk(KERN_ERR PFX "5706 A1 can only be used in a PCIX bus, " - "aborting.\n"); + dev_printk(KERN_ERR, &pdev->dev, + "5706 A1 can only be used in a PCIX bus, aborting.\n"); goto err_out_unmap; } @@ -5733,7 +5738,8 @@ bnx2_init_board(struct pci_dev *pdev, struct net_device *dev) if ((reg & BNX2_DEV_INFO_SIGNATURE_MAGIC_MASK) != BNX2_DEV_INFO_SIGNATURE_MAGIC) { - printk(KERN_ERR PFX "Firmware not running, aborting.\n"); + dev_printk(KERN_ERR, &pdev->dev, + "Firmware not running, aborting.\n"); rc = -ENODEV; goto err_out_unmap; } @@ -5895,7 +5901,8 @@ bnx2_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) #endif if ((rc = register_netdev(dev))) { - printk(KERN_ERR PFX "Cannot register net device\n"); + dev_printk(KERN_ERR, &pdev->dev, + "Cannot register net device\n"); if (bp->regview) iounmap(bp->regview); pci_release_regions(pdev); diff --git a/drivers/net/cassini.c b/drivers/net/cassini.c index d33130f6470..428e2067738 100644 --- a/drivers/net/cassini.c +++ b/drivers/net/cassini.c @@ -4887,13 +4887,13 @@ static int __devinit cas_init_one(struct pci_dev *pdev, err = pci_enable_device(pdev); if (err) { - printk(KERN_ERR PFX "Cannot enable PCI device, " + dev_printk(KERN_ERR, &pdev->dev, "Cannot enable PCI device, " "aborting.\n"); return err; } if (!(pci_resource_flags(pdev, 0) & IORESOURCE_MEM)) { - printk(KERN_ERR PFX "Cannot find proper PCI device " + dev_printk(KERN_ERR, &pdev->dev, "Cannot find proper PCI device " "base address, aborting.\n"); err = -ENODEV; goto err_out_disable_pdev; @@ -4901,7 +4901,7 @@ static int __devinit cas_init_one(struct pci_dev *pdev, dev = alloc_etherdev(sizeof(*cp)); if (!dev) { - printk(KERN_ERR PFX "Etherdev alloc failed, aborting.\n"); + dev_printk(KERN_ERR, &pdev->dev, "Etherdev alloc failed, aborting.\n"); err = -ENOMEM; goto err_out_disable_pdev; } @@ -4910,7 +4910,7 @@ static int __devinit cas_init_one(struct pci_dev *pdev, err = pci_request_regions(pdev, dev->name); if (err) { - printk(KERN_ERR PFX "Cannot obtain PCI resources, " + dev_printk(KERN_ERR, &pdev->dev, "Cannot obtain PCI resources, " "aborting.\n"); goto err_out_free_netdev; } @@ -4941,7 +4941,7 @@ static int __devinit cas_init_one(struct pci_dev *pdev, if (pci_write_config_byte(pdev, PCI_CACHE_LINE_SIZE, cas_cacheline_size)) { - printk(KERN_ERR PFX "Could not set PCI cache " + dev_printk(KERN_ERR, &pdev->dev, "Could not set PCI cache " "line size\n"); goto err_write_cacheline; } @@ -4955,7 +4955,7 @@ static int __devinit cas_init_one(struct pci_dev *pdev, err = pci_set_consistent_dma_mask(pdev, DMA_64BIT_MASK); if (err < 0) { - printk(KERN_ERR PFX "Unable to obtain 64-bit DMA " + dev_printk(KERN_ERR, &pdev->dev, "Unable to obtain 64-bit DMA " "for consistent allocations\n"); goto err_out_free_res; } @@ -4963,7 +4963,7 @@ static int __devinit cas_init_one(struct pci_dev *pdev, } else { err = pci_set_dma_mask(pdev, DMA_32BIT_MASK); if (err) { - printk(KERN_ERR PFX "No usable DMA configuration, " + dev_printk(KERN_ERR, &pdev->dev, "No usable DMA configuration, " "aborting.\n"); goto err_out_free_res; } @@ -5023,7 +5023,7 @@ static int __devinit cas_init_one(struct pci_dev *pdev, /* give us access to cassini registers */ cp->regs = pci_iomap(pdev, 0, casreg_len); if (cp->regs == 0UL) { - printk(KERN_ERR PFX "Cannot map device registers, " + dev_printk(KERN_ERR, &pdev->dev, "Cannot map device registers, " "aborting.\n"); goto err_out_free_res; } @@ -5040,7 +5040,7 @@ static int __devinit cas_init_one(struct pci_dev *pdev, pci_alloc_consistent(pdev, sizeof(struct cas_init_block), &cp->block_dvma); if (!cp->init_block) { - printk(KERN_ERR PFX "Cannot allocate init block, " + dev_printk(KERN_ERR, &pdev->dev, "Cannot allocate init block, " "aborting.\n"); goto err_out_iounmap; } @@ -5085,7 +5085,7 @@ static int __devinit cas_init_one(struct pci_dev *pdev, dev->features |= NETIF_F_HIGHDMA; if (register_netdev(dev)) { - printk(KERN_ERR PFX "Cannot register net device, " + dev_printk(KERN_ERR, &pdev->dev, "Cannot register net device, " "aborting.\n"); goto err_out_free_consistent; } diff --git a/drivers/net/eepro100.c b/drivers/net/eepro100.c index 2ad32754292..bccb12e03c2 100644 --- a/drivers/net/eepro100.c +++ b/drivers/net/eepro100.c @@ -555,12 +555,14 @@ static int __devinit eepro100_init_one (struct pci_dev *pdev, if (!request_region(pci_resource_start(pdev, 1), pci_resource_len(pdev, 1), "eepro100")) { - printk (KERN_ERR "eepro100: cannot reserve I/O ports\n"); + dev_printk (KERN_ERR, &pdev->dev, + "eepro100: cannot reserve I/O ports\n"); goto err_out_none; } if (!request_mem_region(pci_resource_start(pdev, 0), pci_resource_len(pdev, 0), "eepro100")) { - printk (KERN_ERR "eepro100: cannot reserve MMIO region\n"); + dev_printk (KERN_ERR, &pdev->dev, + "eepro100: cannot reserve MMIO region\n"); goto err_out_free_pio_region; } @@ -573,7 +575,7 @@ static int __devinit eepro100_init_one (struct pci_dev *pdev, ioaddr = pci_iomap(pdev, pci_bar, 0); if (!ioaddr) { - printk (KERN_ERR "eepro100: cannot remap IO\n"); + dev_printk (KERN_ERR, &pdev->dev, "eepro100: cannot remap IO\n"); goto err_out_free_mmio_region; } diff --git a/drivers/net/epic100.c b/drivers/net/epic100.c index 05c9a26a74e..6dd0e9d159d 100644 --- a/drivers/net/epic100.c +++ b/drivers/net/epic100.c @@ -422,8 +422,7 @@ static int __devinit epic_init_one (struct pci_dev *pdev, ((u16 *)dev->dev_addr)[i] = le16_to_cpu(inw(ioaddr + LAN0 + i*4)); if (debug > 2) { - printk(KERN_DEBUG DRV_NAME "(%s): EEPROM contents\n", - pci_name(pdev)); + dev_printk(KERN_DEBUG, &pdev->dev, "EEPROM contents:\n"); for (i = 0; i < 64; i++) printk(" %4.4x%s", read_eeprom(ioaddr, i), i % 16 == 15 ? "\n" : ""); @@ -445,21 +444,23 @@ static int __devinit epic_init_one (struct pci_dev *pdev, int mii_status = mdio_read(dev, phy, MII_BMSR); if (mii_status != 0xffff && mii_status != 0x0000) { ep->phys[phy_idx++] = phy; - printk(KERN_INFO DRV_NAME "(%s): MII transceiver #%d control " - "%4.4x status %4.4x.\n", - pci_name(pdev), phy, mdio_read(dev, phy, 0), mii_status); + dev_printk(KERN_INFO, &pdev->dev, + "MII transceiver #%d control " + "%4.4x status %4.4x.\n", + phy, mdio_read(dev, phy, 0), mii_status); } } ep->mii_phy_cnt = phy_idx; if (phy_idx != 0) { phy = ep->phys[0]; ep->mii.advertising = mdio_read(dev, phy, MII_ADVERTISE); - printk(KERN_INFO DRV_NAME "(%s): Autonegotiation advertising %4.4x link " + dev_printk(KERN_INFO, &pdev->dev, + "Autonegotiation advertising %4.4x link " "partner %4.4x.\n", - pci_name(pdev), ep->mii.advertising, mdio_read(dev, phy, 5)); + ep->mii.advertising, mdio_read(dev, phy, 5)); } else if ( ! (ep->chip_flags & NO_MII)) { - printk(KERN_WARNING DRV_NAME "(%s): ***WARNING***: No MII transceiver found!\n", - pci_name(pdev)); + dev_printk(KERN_WARNING, &pdev->dev, + "***WARNING***: No MII transceiver found!\n"); /* Use the known PHY address of the EPII. */ ep->phys[0] = 3; } @@ -474,8 +475,8 @@ static int __devinit epic_init_one (struct pci_dev *pdev, /* The lower four bits are the media type. */ if (duplex) { ep->mii.force_media = ep->mii.full_duplex = 1; - printk(KERN_INFO DRV_NAME "(%s): Forced full duplex operation requested.\n", - pci_name(pdev)); + dev_printk(KERN_INFO, &pdev->dev, + "Forced full duplex operation requested.\n"); } dev->if_port = ep->default_port = option; diff --git a/drivers/net/fealnx.c b/drivers/net/fealnx.c index aaf13665876..d26140ad36e 100644 --- a/drivers/net/fealnx.c +++ b/drivers/net/fealnx.c @@ -578,9 +578,9 @@ static int __devinit fealnx_init_one(struct pci_dev *pdev, if (mii_status != 0xffff && mii_status != 0x0000) { np->phys[phy_idx++] = phy; - printk(KERN_INFO - "%s: MII PHY found at address %d, status " - "0x%4.4x.\n", dev->name, phy, mii_status); + dev_printk(KERN_INFO, &pdev->dev, + "MII PHY found at address %d, status " + "0x%4.4x.\n", phy, mii_status); /* get phy type */ { unsigned int data; @@ -603,10 +603,10 @@ static int __devinit fealnx_init_one(struct pci_dev *pdev, } np->mii_cnt = phy_idx; - if (phy_idx == 0) { - printk(KERN_WARNING "%s: MII PHY not found -- this device may " - "not operate correctly.\n", dev->name); - } + if (phy_idx == 0) + dev_printk(KERN_WARNING, &pdev->dev, + "MII PHY not found -- this device may " + "not operate correctly.\n"); } else { np->phys[0] = 32; /* 89/6/23 add, (begin) */ @@ -632,7 +632,8 @@ static int __devinit fealnx_init_one(struct pci_dev *pdev, np->mii.full_duplex = full_duplex[card_idx]; if (np->mii.full_duplex) { - printk(KERN_INFO "%s: Media type forced to Full Duplex.\n", dev->name); + dev_printk(KERN_INFO, &pdev->dev, + "Media type forced to Full Duplex.\n"); /* 89/6/13 add, (begin) */ // if (np->PHYType==MarvellPHY) if ((np->PHYType == MarvellPHY) || (np->PHYType == LevelOnePHY)) { diff --git a/drivers/net/hamachi.c b/drivers/net/hamachi.c index 1b212a56933..409c6aab041 100644 --- a/drivers/net/hamachi.c +++ b/drivers/net/hamachi.c @@ -601,7 +601,8 @@ static int __devinit hamachi_init_one (struct pci_dev *pdev, pci_set_master(pdev); i = pci_request_regions(pdev, DRV_NAME); - if (i) return i; + if (i) + return i; irq = pdev->irq; ioaddr = ioremap(base, 0x400); diff --git a/drivers/net/ne2k-pci.c b/drivers/net/ne2k-pci.c index fa50eb88940..4f226064d55 100644 --- a/drivers/net/ne2k-pci.c +++ b/drivers/net/ne2k-pci.c @@ -231,12 +231,14 @@ static int __devinit ne2k_pci_init_one (struct pci_dev *pdev, irq = pdev->irq; if (!ioaddr || ((pci_resource_flags (pdev, 0) & IORESOURCE_IO) == 0)) { - printk (KERN_ERR PFX "no I/O resource at PCI BAR #0\n"); + dev_printk (KERN_ERR, &pdev->dev, + "no I/O resource at PCI BAR #0\n"); return -ENODEV; } if (request_region (ioaddr, NE_IO_EXTENT, DRV_NAME) == NULL) { - printk (KERN_ERR PFX "I/O resource 0x%x @ 0x%lx busy\n", + dev_printk (KERN_ERR, &pdev->dev, + "I/O resource 0x%x @ 0x%lx busy\n", NE_IO_EXTENT, ioaddr); return -EBUSY; } @@ -263,7 +265,8 @@ static int __devinit ne2k_pci_init_one (struct pci_dev *pdev, /* Allocate net_device, dev->priv; fill in 8390 specific dev fields. */ dev = alloc_ei_netdev(); if (!dev) { - printk (KERN_ERR PFX "cannot allocate ethernet device\n"); + dev_printk (KERN_ERR, &pdev->dev, + "cannot allocate ethernet device\n"); goto err_out_free_res; } SET_MODULE_OWNER(dev); @@ -281,7 +284,8 @@ static int __devinit ne2k_pci_init_one (struct pci_dev *pdev, while ((inb(ioaddr + EN0_ISR) & ENISR_RESET) == 0) /* Limit wait: '2' avoids jiffy roll-over. */ if (jiffies - reset_start_time > 2) { - printk(KERN_ERR PFX "Card failure (no reset ack).\n"); + dev_printk(KERN_ERR, &pdev->dev, + "Card failure (no reset ack).\n"); goto err_out_free_netdev; } diff --git a/drivers/net/ns83820.c b/drivers/net/ns83820.c index 70429108c40..d6e7ac2d0c9 100644 --- a/drivers/net/ns83820.c +++ b/drivers/net/ns83820.c @@ -1832,7 +1832,8 @@ static int __devinit ns83820_init_one(struct pci_dev *pci_dev, const struct pci_ } else if (!pci_set_dma_mask(pci_dev, DMA_32BIT_MASK)) { using_dac = 0; } else { - printk(KERN_WARNING "ns83820.c: pci_set_dma_mask failed!\n"); + dev_printk(KERN_WARNING, &pci_dev->dev, + "pci_set_dma_mask failed!\n"); return -ENODEV; } @@ -1855,7 +1856,8 @@ static int __devinit ns83820_init_one(struct pci_dev *pci_dev, const struct pci_ err = pci_enable_device(pci_dev); if (err) { - printk(KERN_INFO "ns83820: pci_enable_dev failed: %d\n", err); + dev_printk(KERN_INFO, &pci_dev->dev, + "pci_enable_dev failed: %d\n", err); goto out_free; } @@ -1884,8 +1886,9 @@ static int __devinit ns83820_init_one(struct pci_dev *pci_dev, const struct pci_ err = request_irq(pci_dev->irq, ns83820_irq, IRQF_SHARED, DRV_NAME, ndev); if (err) { - printk(KERN_INFO "ns83820: unable to register irq %d\n", - pci_dev->irq); + dev_printk(KERN_INFO, &pci_dev->dev, + "unable to register irq %d, err %d\n", + pci_dev->irq, err); goto out_disable; } @@ -1899,7 +1902,8 @@ static int __devinit ns83820_init_one(struct pci_dev *pci_dev, const struct pci_ rtnl_lock(); err = dev_alloc_name(ndev, ndev->name); if (err < 0) { - printk(KERN_INFO "ns83820: unable to get netdev name: %d\n", err); + dev_printk(KERN_INFO, &pci_dev->dev, + "unable to get netdev name: %d\n", err); goto out_free_irq; } diff --git a/drivers/net/pci-skeleton.c b/drivers/net/pci-skeleton.c index 3388ee1313e..9c1ce318b07 100644 --- a/drivers/net/pci-skeleton.c +++ b/drivers/net/pci-skeleton.c @@ -601,7 +601,8 @@ static int __devinit netdrv_init_board (struct pci_dev *pdev, /* dev zeroed in alloc_etherdev */ dev = alloc_etherdev (sizeof (*tp)); if (dev == NULL) { - printk (KERN_ERR PFX "unable to alloc new ethernet\n"); + dev_printk (KERN_ERR, &pdev->dev, + "unable to alloc new ethernet\n"); DPRINTK ("EXIT, returning -ENOMEM\n"); return -ENOMEM; } @@ -631,14 +632,16 @@ static int __devinit netdrv_init_board (struct pci_dev *pdev, /* make sure PCI base addr 0 is PIO */ if (!(pio_flags & IORESOURCE_IO)) { - printk (KERN_ERR PFX "region #0 not a PIO resource, aborting\n"); + dev_printk (KERN_ERR, &pdev->dev, + "region #0 not a PIO resource, aborting\n"); rc = -ENODEV; goto err_out; } /* make sure PCI base addr 1 is MMIO */ if (!(mmio_flags & IORESOURCE_MEM)) { - printk (KERN_ERR PFX "region #1 not an MMIO resource, aborting\n"); + dev_printk (KERN_ERR, &pdev->dev, + "region #1 not an MMIO resource, aborting\n"); rc = -ENODEV; goto err_out; } @@ -646,12 +649,13 @@ static int __devinit netdrv_init_board (struct pci_dev *pdev, /* check for weird/broken PCI region reporting */ if ((pio_len < NETDRV_MIN_IO_SIZE) || (mmio_len < NETDRV_MIN_IO_SIZE)) { - printk (KERN_ERR PFX "Invalid PCI region size(s), aborting\n"); + dev_printk (KERN_ERR, &pdev->dev, + "Invalid PCI region size(s), aborting\n"); rc = -ENODEV; goto err_out; } - rc = pci_request_regions (pdev, "pci-skeleton"); + rc = pci_request_regions (pdev, MODNAME); if (rc) goto err_out; @@ -663,7 +667,8 @@ static int __devinit netdrv_init_board (struct pci_dev *pdev, /* ioremap MMIO region */ ioaddr = ioremap (mmio_start, mmio_len); if (ioaddr == NULL) { - printk (KERN_ERR PFX "cannot remap MMIO, aborting\n"); + dev_printk (KERN_ERR, &pdev->dev, + "cannot remap MMIO, aborting\n"); rc = -EIO; goto err_out_free_res; } @@ -699,9 +704,10 @@ static int __devinit netdrv_init_board (struct pci_dev *pdev, } /* if unknown chip, assume array element #0, original RTL-8139 in this case */ - printk (KERN_DEBUG PFX "PCI device %s: unknown chip version, assuming RTL-8139\n", - pci_name(pdev)); - printk (KERN_DEBUG PFX "PCI device %s: TxConfig = 0x%lx\n", pci_name(pdev), NETDRV_R32 (TxConfig)); + dev_printk (KERN_DEBUG, &pdev->dev, + "unknown chip version, assuming RTL-8139\n"); + dev_printk (KERN_DEBUG, &pdev->dev, "TxConfig = 0x%lx\n", + NETDRV_R32 (TxConfig)); tp->chipset = 0; match: diff --git a/drivers/net/r8169.c b/drivers/net/r8169.c index 16a0ef1b136..ae2a1f8f145 100644 --- a/drivers/net/r8169.c +++ b/drivers/net/r8169.c @@ -1406,7 +1406,8 @@ rtl8169_init_board(struct pci_dev *pdev, struct net_device **dev_out, dev = alloc_etherdev(sizeof (*tp)); if (dev == NULL) { if (netif_msg_drv(&debug)) - printk(KERN_ERR PFX "unable to alloc new ethernet\n"); + dev_printk(KERN_ERR, &pdev->dev, + "unable to alloc new ethernet\n"); goto err_out; } @@ -1418,10 +1419,8 @@ rtl8169_init_board(struct pci_dev *pdev, struct net_device **dev_out, /* enable device (incl. PCI PM wakeup and hotplug setup) */ rc = pci_enable_device(pdev); if (rc < 0) { - if (netif_msg_probe(tp)) { - printk(KERN_ERR PFX "%s: enable failure\n", - pci_name(pdev)); - } + if (netif_msg_probe(tp)) + dev_printk(KERN_ERR, &pdev->dev, "enable failure\n"); goto err_out_free_dev; } @@ -1437,37 +1436,33 @@ rtl8169_init_board(struct pci_dev *pdev, struct net_device **dev_out, pci_read_config_word(pdev, pm_cap + PCI_PM_CTRL, &pwr_command); acpi_idle_state = pwr_command & PCI_PM_CTRL_STATE_MASK; } else { - if (netif_msg_probe(tp)) { - printk(KERN_ERR PFX + if (netif_msg_probe(tp)) + dev_printk(KERN_ERR, &pdev->dev, "PowerManagement capability not found.\n"); - } } /* make sure PCI base addr 1 is MMIO */ if (!(pci_resource_flags(pdev, 1) & IORESOURCE_MEM)) { - if (netif_msg_probe(tp)) { - printk(KERN_ERR PFX + if (netif_msg_probe(tp)) + dev_printk(KERN_ERR, &pdev->dev, "region #1 not an MMIO resource, aborting\n"); - } rc = -ENODEV; goto err_out_mwi; } /* check for weird/broken PCI region reporting */ if (pci_resource_len(pdev, 1) < R8169_REGS_SIZE) { - if (netif_msg_probe(tp)) { - printk(KERN_ERR PFX + if (netif_msg_probe(tp)) + dev_printk(KERN_ERR, &pdev->dev, "Invalid PCI region size(s), aborting\n"); - } rc = -ENODEV; goto err_out_mwi; } rc = pci_request_regions(pdev, MODULENAME); if (rc < 0) { - if (netif_msg_probe(tp)) { - printk(KERN_ERR PFX "%s: could not request regions.\n", - pci_name(pdev)); - } + if (netif_msg_probe(tp)) + dev_printk(KERN_ERR, &pdev->dev, + "could not request regions.\n"); goto err_out_mwi; } @@ -1480,10 +1475,9 @@ rtl8169_init_board(struct pci_dev *pdev, struct net_device **dev_out, } else { rc = pci_set_dma_mask(pdev, DMA_32BIT_MASK); if (rc < 0) { - if (netif_msg_probe(tp)) { - printk(KERN_ERR PFX + if (netif_msg_probe(tp)) + dev_printk(KERN_ERR, &pdev->dev, "DMA configuration failed.\n"); - } goto err_out_free_res; } } @@ -1494,7 +1488,8 @@ rtl8169_init_board(struct pci_dev *pdev, struct net_device **dev_out, ioaddr = ioremap(pci_resource_start(pdev, 1), R8169_REGS_SIZE); if (ioaddr == NULL) { if (netif_msg_probe(tp)) - printk(KERN_ERR PFX "cannot remap MMIO, aborting\n"); + dev_printk(KERN_ERR, &pdev->dev, + "cannot remap MMIO, aborting\n"); rc = -EIO; goto err_out_free_res; } @@ -1526,9 +1521,9 @@ rtl8169_init_board(struct pci_dev *pdev, struct net_device **dev_out, if (i < 0) { /* Unknown chip: assume array element #0, original RTL-8169 */ if (netif_msg_probe(tp)) { - printk(KERN_DEBUG PFX "PCI device %s: " + dev_printk(KERN_DEBUG, &pdev->dev, "unknown chip version, assuming %s\n", - pci_name(pdev), rtl_chip_info[0].name); + rtl_chip_info[0].name); } i++; } -- cgit v1.2.3-70-g09d2 From 9b91cf9daac41eeaaea57ecfe68dc13bb0305fa9 Mon Sep 17 00:00:00 2001 From: Jeff Garzik Date: Tue, 27 Jun 2006 11:39:50 -0400 Subject: [netdrvr] use dev_xxx() printk helpers, rather than dev_printk(KERN_xxx, ... Suggested by Jiri Slaby. Signed-off-by: Jeff Garzik --- drivers/net/8139cp.c | 17 +++++++---------- drivers/net/8139too.c | 27 ++++++++++----------------- drivers/net/b44.c | 23 +++++++++-------------- drivers/net/bnx2.c | 29 +++++++++++------------------ drivers/net/cassini.c | 25 ++++++++++--------------- drivers/net/eepro100.c | 8 +++----- drivers/net/epic100.c | 15 +++++++-------- drivers/net/fealnx.c | 9 ++++----- drivers/net/ne2k-pci.c | 11 ++++------- drivers/net/ns83820.c | 12 ++++-------- drivers/net/pci-skeleton.c | 15 +++++---------- drivers/net/r8169.c | 19 ++++++++----------- drivers/net/via-velocity.c | 12 ++++++------ 13 files changed, 88 insertions(+), 134 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/8139cp.c b/drivers/net/8139cp.c index 93b7c904bba..d2150baa7e3 100644 --- a/drivers/net/8139cp.c +++ b/drivers/net/8139cp.c @@ -1836,11 +1836,10 @@ static int cp_init_one (struct pci_dev *pdev, const struct pci_device_id *ent) if (pdev->vendor == PCI_VENDOR_ID_REALTEK && pdev->device == PCI_DEVICE_ID_REALTEK_8139 && pci_rev < 0x20) { - dev_printk(KERN_ERR, &pdev->dev, + dev_err(&pdev->dev, "This (id %04x:%04x rev %02x) is not an 8139C+ compatible chip\n", pdev->vendor, pdev->device, pci_rev); - dev_printk(KERN_ERR, &pdev->dev, - "Try the \"8139too\" driver instead.\n"); + dev_err(&pdev->dev, "Try the \"8139too\" driver instead.\n"); return -ENODEV; } @@ -1878,13 +1877,12 @@ static int cp_init_one (struct pci_dev *pdev, const struct pci_device_id *ent) pciaddr = pci_resource_start(pdev, 1); if (!pciaddr) { rc = -EIO; - dev_printk(KERN_ERR, &pdev->dev, "no MMIO resource\n"); + dev_err(&pdev->dev, "no MMIO resource\n"); goto err_out_res; } if (pci_resource_len(pdev, 1) < CP_REGS_SIZE) { rc = -EIO; - dev_printk(KERN_ERR, &pdev->dev, - "MMIO resource (%llx) too small\n", + dev_err(&pdev->dev, "MMIO resource (%llx) too small\n", (unsigned long long)pci_resource_len(pdev, 1)); goto err_out_res; } @@ -1899,13 +1897,13 @@ static int cp_init_one (struct pci_dev *pdev, const struct pci_device_id *ent) rc = pci_set_dma_mask(pdev, DMA_32BIT_MASK); if (rc) { - dev_printk(KERN_ERR, &pdev->dev, + dev_err(&pdev->dev, "No usable DMA configuration, aborting.\n"); goto err_out_res; } rc = pci_set_consistent_dma_mask(pdev, DMA_32BIT_MASK); if (rc) { - dev_printk(KERN_ERR, &pdev->dev, + dev_err(&pdev->dev, "No usable consistent DMA configuration, " "aborting.\n"); goto err_out_res; @@ -1918,8 +1916,7 @@ static int cp_init_one (struct pci_dev *pdev, const struct pci_device_id *ent) regs = ioremap(pciaddr, CP_REGS_SIZE); if (!regs) { rc = -EIO; - dev_printk(KERN_ERR, &pdev->dev, - "Cannot map PCI MMIO (%llx@%llx)\n", + dev_err(&pdev->dev, "Cannot map PCI MMIO (%lx@%lx)\n", (unsigned long long)pci_resource_len(pdev, 1), (unsigned long long)pciaddr); goto err_out_res; diff --git a/drivers/net/8139too.c b/drivers/net/8139too.c index 5e9ef52a5ca..cd9718512d1 100644 --- a/drivers/net/8139too.c +++ b/drivers/net/8139too.c @@ -768,8 +768,7 @@ static int __devinit rtl8139_init_board (struct pci_dev *pdev, /* dev and priv zeroed in alloc_etherdev */ dev = alloc_etherdev (sizeof (*tp)); if (dev == NULL) { - dev_printk (KERN_ERR, &pdev->dev, - "Unable to alloc new net device\n"); + dev_err(&pdev->dev, "Unable to alloc new net device\n"); return -ENOMEM; } SET_MODULE_OWNER(dev); @@ -801,29 +800,25 @@ static int __devinit rtl8139_init_board (struct pci_dev *pdev, #ifdef USE_IO_OPS /* make sure PCI base addr 0 is PIO */ if (!(pio_flags & IORESOURCE_IO)) { - dev_printk (KERN_ERR, &pdev->dev, - "region #0 not a PIO resource, aborting\n"); + dev_err(&pdev->dev, "region #0 not a PIO resource, aborting\n"); rc = -ENODEV; goto err_out; } /* check for weird/broken PCI region reporting */ if (pio_len < RTL_MIN_IO_SIZE) { - dev_printk (KERN_ERR, &pdev->dev, - "Invalid PCI I/O region size(s), aborting\n"); + dev_err(&pdev->dev, "Invalid PCI I/O region size(s), aborting\n"); rc = -ENODEV; goto err_out; } #else /* make sure PCI base addr 1 is MMIO */ if (!(mmio_flags & IORESOURCE_MEM)) { - dev_printk (KERN_ERR, &pdev->dev, - "region #1 not an MMIO resource, aborting\n"); + dev_err(&pdev->dev, "region #1 not an MMIO resource, aborting\n"); rc = -ENODEV; goto err_out; } if (mmio_len < RTL_MIN_IO_SIZE) { - dev_printk (KERN_ERR, &pdev->dev, - "Invalid PCI mem region size(s), aborting\n"); + dev_err(&pdev->dev, "Invalid PCI mem region size(s), aborting\n"); rc = -ENODEV; goto err_out; } @@ -840,7 +835,7 @@ static int __devinit rtl8139_init_board (struct pci_dev *pdev, #ifdef USE_IO_OPS ioaddr = ioport_map(pio_start, pio_len); if (!ioaddr) { - dev_printk (KERN_ERR, &pdev->dev, "cannot map PIO, aborting\n"); + dev_err(&pdev->dev, "cannot map PIO, aborting\n"); rc = -EIO; goto err_out; } @@ -851,8 +846,7 @@ static int __devinit rtl8139_init_board (struct pci_dev *pdev, /* ioremap MMIO region */ ioaddr = pci_iomap(pdev, 1, 0); if (ioaddr == NULL) { - dev_printk (KERN_ERR, &pdev->dev, - "cannot remap MMIO, aborting\n"); + dev_err(&pdev->dev, "cannot remap MMIO, aborting\n"); rc = -EIO; goto err_out; } @@ -866,8 +860,7 @@ static int __devinit rtl8139_init_board (struct pci_dev *pdev, /* check for missing/broken hardware */ if (RTL_R32 (TxConfig) == 0xFFFFFFFF) { - dev_printk (KERN_ERR, &pdev->dev, - "Chip not responding, ignoring board\n"); + dev_err(&pdev->dev, "Chip not responding, ignoring board\n"); rc = -EIO; goto err_out; } @@ -961,10 +954,10 @@ static int __devinit rtl8139_init_one (struct pci_dev *pdev, if (pdev->vendor == PCI_VENDOR_ID_REALTEK && pdev->device == PCI_DEVICE_ID_REALTEK_8139 && pci_rev >= 0x20) { - dev_printk(KERN_INFO, &pdev->dev, + dev_info(&pdev->dev, "This (id %04x:%04x rev %02x) is an enhanced 8139C+ chip\n", pdev->vendor, pdev->device, pci_rev); - dev_printk(KERN_INFO, &pdev->dev, + dev_info(&pdev->dev, "Use the \"8139cp\" driver for improved performance and stability.\n"); } diff --git a/drivers/net/b44.c b/drivers/net/b44.c index 5815e3dc125..bea0fc0ede2 100644 --- a/drivers/net/b44.c +++ b/drivers/net/b44.c @@ -2120,13 +2120,13 @@ static int __devinit b44_init_one(struct pci_dev *pdev, err = pci_enable_device(pdev); if (err) { - dev_printk(KERN_ERR, &pdev->dev, "Cannot enable PCI device, " + dev_err(&pdev->dev, "Cannot enable PCI device, " "aborting.\n"); return err; } if (!(pci_resource_flags(pdev, 0) & IORESOURCE_MEM)) { - dev_printk(KERN_ERR, &pdev->dev, + dev_err(&pdev->dev, "Cannot find proper PCI device " "base address, aborting.\n"); err = -ENODEV; @@ -2135,7 +2135,7 @@ static int __devinit b44_init_one(struct pci_dev *pdev, err = pci_request_regions(pdev, DRV_MODULE_NAME); if (err) { - dev_printk(KERN_ERR, &pdev->dev, + dev_err(&pdev->dev, "Cannot obtain PCI resources, aborting.\n"); goto err_out_disable_pdev; } @@ -2144,15 +2144,13 @@ static int __devinit b44_init_one(struct pci_dev *pdev, err = pci_set_dma_mask(pdev, (u64) B44_DMA_MASK); if (err) { - dev_printk(KERN_ERR, &pdev->dev, - "No usable DMA configuration, aborting.\n"); + dev_err(&pdev->dev, "No usable DMA configuration, aborting.\n"); goto err_out_free_res; } err = pci_set_consistent_dma_mask(pdev, (u64) B44_DMA_MASK); if (err) { - dev_printk(KERN_ERR, &pdev->dev, - "No usable DMA configuration, aborting.\n"); + dev_err(&pdev->dev, "No usable DMA configuration, aborting.\n"); goto err_out_free_res; } @@ -2161,8 +2159,7 @@ static int __devinit b44_init_one(struct pci_dev *pdev, dev = alloc_etherdev(sizeof(*bp)); if (!dev) { - dev_printk(KERN_ERR, &pdev->dev, - "Etherdev alloc failed, aborting.\n"); + dev_err(&pdev->dev, "Etherdev alloc failed, aborting.\n"); err = -ENOMEM; goto err_out_free_res; } @@ -2183,8 +2180,7 @@ static int __devinit b44_init_one(struct pci_dev *pdev, bp->regs = ioremap(b44reg_base, b44reg_len); if (bp->regs == 0UL) { - dev_printk(KERN_ERR, &pdev->dev, "Cannot map device registers, " - "aborting.\n"); + dev_err(&pdev->dev, "Cannot map device registers, aborting.\n"); err = -ENOMEM; goto err_out_free_dev; } @@ -2214,7 +2210,7 @@ static int __devinit b44_init_one(struct pci_dev *pdev, err = b44_get_invariants(bp); if (err) { - dev_printk(KERN_ERR, &pdev->dev, + dev_err(&pdev->dev, "Problem fetching invariants of chip, aborting.\n"); goto err_out_iounmap; } @@ -2235,8 +2231,7 @@ static int __devinit b44_init_one(struct pci_dev *pdev, err = register_netdev(dev); if (err) { - dev_printk(KERN_ERR, &pdev->dev, "Cannot register net device, " - "aborting.\n"); + dev_err(&pdev->dev, "Cannot register net device, aborting.\n"); goto err_out_iounmap; } diff --git a/drivers/net/bnx2.c b/drivers/net/bnx2.c index 5502b9aeda5..64b6a72b4f6 100644 --- a/drivers/net/bnx2.c +++ b/drivers/net/bnx2.c @@ -5575,13 +5575,12 @@ bnx2_init_board(struct pci_dev *pdev, struct net_device *dev) /* enable device (incl. PCI PM wakeup), and bus-mastering */ rc = pci_enable_device(pdev); if (rc) { - dev_printk(KERN_ERR, &pdev->dev, - "Cannot enable PCI device, aborting."); + dev_err(&pdev->dev, "Cannot enable PCI device, aborting."); goto err_out; } if (!(pci_resource_flags(pdev, 0) & IORESOURCE_MEM)) { - dev_printk(KERN_ERR, &pdev->dev, + dev_err(&pdev->dev, "Cannot find PCI device base address, aborting.\n"); rc = -ENODEV; goto err_out_disable; @@ -5589,8 +5588,7 @@ bnx2_init_board(struct pci_dev *pdev, struct net_device *dev) rc = pci_request_regions(pdev, DRV_MODULE_NAME); if (rc) { - dev_printk(KERN_ERR, &pdev->dev, - "Cannot obtain PCI resources, aborting.\n"); + dev_err(&pdev->dev, "Cannot obtain PCI resources, aborting.\n"); goto err_out_disable; } @@ -5598,7 +5596,7 @@ bnx2_init_board(struct pci_dev *pdev, struct net_device *dev) bp->pm_cap = pci_find_capability(pdev, PCI_CAP_ID_PM); if (bp->pm_cap == 0) { - dev_printk(KERN_ERR, &pdev->dev, + dev_err(&pdev->dev, "Cannot find power management capability, aborting.\n"); rc = -EIO; goto err_out_release; @@ -5606,8 +5604,7 @@ bnx2_init_board(struct pci_dev *pdev, struct net_device *dev) bp->pcix_cap = pci_find_capability(pdev, PCI_CAP_ID_PCIX); if (bp->pcix_cap == 0) { - dev_printk(KERN_ERR, &pdev->dev, - "Cannot find PCIX capability, aborting.\n"); + dev_err(&pdev->dev, "Cannot find PCIX capability, aborting.\n"); rc = -EIO; goto err_out_release; } @@ -5615,15 +5612,14 @@ bnx2_init_board(struct pci_dev *pdev, struct net_device *dev) if (pci_set_dma_mask(pdev, DMA_64BIT_MASK) == 0) { bp->flags |= USING_DAC_FLAG; if (pci_set_consistent_dma_mask(pdev, DMA_64BIT_MASK) != 0) { - dev_printk(KERN_ERR, &pdev->dev, + dev_err(&pdev->dev, "pci_set_consistent_dma_mask failed, aborting.\n"); rc = -EIO; goto err_out_release; } } else if (pci_set_dma_mask(pdev, DMA_32BIT_MASK) != 0) { - dev_printk(KERN_ERR, &pdev->dev, - "System does not support DMA, aborting.\n"); + dev_err(&pdev->dev, "System does not support DMA, aborting.\n"); rc = -EIO; goto err_out_release; } @@ -5643,8 +5639,7 @@ bnx2_init_board(struct pci_dev *pdev, struct net_device *dev) bp->regview = ioremap_nocache(dev->base_addr, mem_len); if (!bp->regview) { - dev_printk(KERN_ERR, &pdev->dev, - "Cannot map register space, aborting.\n"); + dev_err(&pdev->dev, "Cannot map register space, aborting.\n"); rc = -ENOMEM; goto err_out_release; } @@ -5716,7 +5711,7 @@ bnx2_init_board(struct pci_dev *pdev, struct net_device *dev) else if ((CHIP_ID(bp) == CHIP_ID_5706_A1) && !(bp->flags & PCIX_FLAG)) { - dev_printk(KERN_ERR, &pdev->dev, + dev_err(&pdev->dev, "5706 A1 can only be used in a PCIX bus, aborting.\n"); goto err_out_unmap; } @@ -5738,8 +5733,7 @@ bnx2_init_board(struct pci_dev *pdev, struct net_device *dev) if ((reg & BNX2_DEV_INFO_SIGNATURE_MAGIC_MASK) != BNX2_DEV_INFO_SIGNATURE_MAGIC) { - dev_printk(KERN_ERR, &pdev->dev, - "Firmware not running, aborting.\n"); + dev_err(&pdev->dev, "Firmware not running, aborting.\n"); rc = -ENODEV; goto err_out_unmap; } @@ -5901,8 +5895,7 @@ bnx2_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) #endif if ((rc = register_netdev(dev))) { - dev_printk(KERN_ERR, &pdev->dev, - "Cannot register net device\n"); + dev_err(&pdev->dev, "Cannot register net device\n"); if (bp->regview) iounmap(bp->regview); pci_release_regions(pdev); diff --git a/drivers/net/cassini.c b/drivers/net/cassini.c index 428e2067738..a31544ccb3c 100644 --- a/drivers/net/cassini.c +++ b/drivers/net/cassini.c @@ -4887,13 +4887,12 @@ static int __devinit cas_init_one(struct pci_dev *pdev, err = pci_enable_device(pdev); if (err) { - dev_printk(KERN_ERR, &pdev->dev, "Cannot enable PCI device, " - "aborting.\n"); + dev_err(&pdev->dev, "Cannot enable PCI device, aborting.\n"); return err; } if (!(pci_resource_flags(pdev, 0) & IORESOURCE_MEM)) { - dev_printk(KERN_ERR, &pdev->dev, "Cannot find proper PCI device " + dev_err(&pdev->dev, "Cannot find proper PCI device " "base address, aborting.\n"); err = -ENODEV; goto err_out_disable_pdev; @@ -4901,7 +4900,7 @@ static int __devinit cas_init_one(struct pci_dev *pdev, dev = alloc_etherdev(sizeof(*cp)); if (!dev) { - dev_printk(KERN_ERR, &pdev->dev, "Etherdev alloc failed, aborting.\n"); + dev_err(&pdev->dev, "Etherdev alloc failed, aborting.\n"); err = -ENOMEM; goto err_out_disable_pdev; } @@ -4910,8 +4909,7 @@ static int __devinit cas_init_one(struct pci_dev *pdev, err = pci_request_regions(pdev, dev->name); if (err) { - dev_printk(KERN_ERR, &pdev->dev, "Cannot obtain PCI resources, " - "aborting.\n"); + dev_err(&pdev->dev, "Cannot obtain PCI resources, aborting.\n"); goto err_out_free_netdev; } pci_set_master(pdev); @@ -4941,7 +4939,7 @@ static int __devinit cas_init_one(struct pci_dev *pdev, if (pci_write_config_byte(pdev, PCI_CACHE_LINE_SIZE, cas_cacheline_size)) { - dev_printk(KERN_ERR, &pdev->dev, "Could not set PCI cache " + dev_err(&pdev->dev, "Could not set PCI cache " "line size\n"); goto err_write_cacheline; } @@ -4955,7 +4953,7 @@ static int __devinit cas_init_one(struct pci_dev *pdev, err = pci_set_consistent_dma_mask(pdev, DMA_64BIT_MASK); if (err < 0) { - dev_printk(KERN_ERR, &pdev->dev, "Unable to obtain 64-bit DMA " + dev_err(&pdev->dev, "Unable to obtain 64-bit DMA " "for consistent allocations\n"); goto err_out_free_res; } @@ -4963,7 +4961,7 @@ static int __devinit cas_init_one(struct pci_dev *pdev, } else { err = pci_set_dma_mask(pdev, DMA_32BIT_MASK); if (err) { - dev_printk(KERN_ERR, &pdev->dev, "No usable DMA configuration, " + dev_err(&pdev->dev, "No usable DMA configuration, " "aborting.\n"); goto err_out_free_res; } @@ -5023,8 +5021,7 @@ static int __devinit cas_init_one(struct pci_dev *pdev, /* give us access to cassini registers */ cp->regs = pci_iomap(pdev, 0, casreg_len); if (cp->regs == 0UL) { - dev_printk(KERN_ERR, &pdev->dev, "Cannot map device registers, " - "aborting.\n"); + dev_err(&pdev->dev, "Cannot map device registers, aborting.\n"); goto err_out_free_res; } cp->casreg_len = casreg_len; @@ -5040,8 +5037,7 @@ static int __devinit cas_init_one(struct pci_dev *pdev, pci_alloc_consistent(pdev, sizeof(struct cas_init_block), &cp->block_dvma); if (!cp->init_block) { - dev_printk(KERN_ERR, &pdev->dev, "Cannot allocate init block, " - "aborting.\n"); + dev_err(&pdev->dev, "Cannot allocate init block, aborting.\n"); goto err_out_iounmap; } @@ -5085,8 +5081,7 @@ static int __devinit cas_init_one(struct pci_dev *pdev, dev->features |= NETIF_F_HIGHDMA; if (register_netdev(dev)) { - dev_printk(KERN_ERR, &pdev->dev, "Cannot register net device, " - "aborting.\n"); + dev_err(&pdev->dev, "Cannot register net device, aborting.\n"); goto err_out_free_consistent; } diff --git a/drivers/net/eepro100.c b/drivers/net/eepro100.c index bccb12e03c2..e445988c92e 100644 --- a/drivers/net/eepro100.c +++ b/drivers/net/eepro100.c @@ -555,14 +555,12 @@ static int __devinit eepro100_init_one (struct pci_dev *pdev, if (!request_region(pci_resource_start(pdev, 1), pci_resource_len(pdev, 1), "eepro100")) { - dev_printk (KERN_ERR, &pdev->dev, - "eepro100: cannot reserve I/O ports\n"); + dev_err(&pdev->dev, "eepro100: cannot reserve I/O ports\n"); goto err_out_none; } if (!request_mem_region(pci_resource_start(pdev, 0), pci_resource_len(pdev, 0), "eepro100")) { - dev_printk (KERN_ERR, &pdev->dev, - "eepro100: cannot reserve MMIO region\n"); + dev_err(&pdev->dev, "eepro100: cannot reserve MMIO region\n"); goto err_out_free_pio_region; } @@ -575,7 +573,7 @@ static int __devinit eepro100_init_one (struct pci_dev *pdev, ioaddr = pci_iomap(pdev, pci_bar, 0); if (!ioaddr) { - dev_printk (KERN_ERR, &pdev->dev, "eepro100: cannot remap IO\n"); + dev_err(&pdev->dev, "eepro100: cannot remap IO\n"); goto err_out_free_mmio_region; } diff --git a/drivers/net/epic100.c b/drivers/net/epic100.c index 6dd0e9d159d..a67650ccf08 100644 --- a/drivers/net/epic100.c +++ b/drivers/net/epic100.c @@ -335,7 +335,7 @@ static int __devinit epic_init_one (struct pci_dev *pdev, irq = pdev->irq; if (pci_resource_len(pdev, 0) < EPIC_TOTAL_SIZE) { - dev_printk(KERN_ERR, &pdev->dev, "no PCI region space\n"); + dev_err(&pdev->dev, "no PCI region space\n"); ret = -ENODEV; goto err_out_disable; } @@ -350,7 +350,7 @@ static int __devinit epic_init_one (struct pci_dev *pdev, dev = alloc_etherdev(sizeof (*ep)); if (!dev) { - dev_printk(KERN_ERR, &pdev->dev, "no memory for eth device\n"); + dev_err(&pdev->dev, "no memory for eth device\n"); goto err_out_free_res; } SET_MODULE_OWNER(dev); @@ -362,7 +362,7 @@ static int __devinit epic_init_one (struct pci_dev *pdev, ioaddr = pci_resource_start (pdev, 1); ioaddr = (long) ioremap (ioaddr, pci_resource_len (pdev, 1)); if (!ioaddr) { - dev_printk(KERN_ERR, &pdev->dev, "ioremap failed\n"); + dev_err(&pdev->dev, "ioremap failed\n"); goto err_out_free_netdev; } #endif @@ -444,7 +444,7 @@ static int __devinit epic_init_one (struct pci_dev *pdev, int mii_status = mdio_read(dev, phy, MII_BMSR); if (mii_status != 0xffff && mii_status != 0x0000) { ep->phys[phy_idx++] = phy; - dev_printk(KERN_INFO, &pdev->dev, + dev_info(&pdev->dev, "MII transceiver #%d control " "%4.4x status %4.4x.\n", phy, mdio_read(dev, phy, 0), mii_status); @@ -454,12 +454,12 @@ static int __devinit epic_init_one (struct pci_dev *pdev, if (phy_idx != 0) { phy = ep->phys[0]; ep->mii.advertising = mdio_read(dev, phy, MII_ADVERTISE); - dev_printk(KERN_INFO, &pdev->dev, + dev_info(&pdev->dev, "Autonegotiation advertising %4.4x link " "partner %4.4x.\n", ep->mii.advertising, mdio_read(dev, phy, 5)); } else if ( ! (ep->chip_flags & NO_MII)) { - dev_printk(KERN_WARNING, &pdev->dev, + dev_warn(&pdev->dev, "***WARNING***: No MII transceiver found!\n"); /* Use the known PHY address of the EPII. */ ep->phys[0] = 3; @@ -475,8 +475,7 @@ static int __devinit epic_init_one (struct pci_dev *pdev, /* The lower four bits are the media type. */ if (duplex) { ep->mii.force_media = ep->mii.full_duplex = 1; - dev_printk(KERN_INFO, &pdev->dev, - "Forced full duplex operation requested.\n"); + dev_info(&pdev->dev, "Forced full duplex requested.\n"); } dev->if_port = ep->default_port = option; diff --git a/drivers/net/fealnx.c b/drivers/net/fealnx.c index d26140ad36e..97d34fee8c1 100644 --- a/drivers/net/fealnx.c +++ b/drivers/net/fealnx.c @@ -505,7 +505,7 @@ static int __devinit fealnx_init_one(struct pci_dev *pdev, len = pci_resource_len(pdev, bar); if (len < MIN_REGION_SIZE) { - dev_printk(KERN_ERR, &pdev->dev, + dev_err(&pdev->dev, "region size %ld too small, aborting\n", len); return -ENODEV; } @@ -578,7 +578,7 @@ static int __devinit fealnx_init_one(struct pci_dev *pdev, if (mii_status != 0xffff && mii_status != 0x0000) { np->phys[phy_idx++] = phy; - dev_printk(KERN_INFO, &pdev->dev, + dev_info(&pdev->dev, "MII PHY found at address %d, status " "0x%4.4x.\n", phy, mii_status); /* get phy type */ @@ -604,7 +604,7 @@ static int __devinit fealnx_init_one(struct pci_dev *pdev, np->mii_cnt = phy_idx; if (phy_idx == 0) - dev_printk(KERN_WARNING, &pdev->dev, + dev_warn(&pdev->dev, "MII PHY not found -- this device may " "not operate correctly.\n"); } else { @@ -632,8 +632,7 @@ static int __devinit fealnx_init_one(struct pci_dev *pdev, np->mii.full_duplex = full_duplex[card_idx]; if (np->mii.full_duplex) { - dev_printk(KERN_INFO, &pdev->dev, - "Media type forced to Full Duplex.\n"); + dev_info(&pdev->dev, "Media type forced to Full Duplex.\n"); /* 89/6/13 add, (begin) */ // if (np->PHYType==MarvellPHY) if ((np->PHYType == MarvellPHY) || (np->PHYType == LevelOnePHY)) { diff --git a/drivers/net/ne2k-pci.c b/drivers/net/ne2k-pci.c index 4f226064d55..34bdba9eec7 100644 --- a/drivers/net/ne2k-pci.c +++ b/drivers/net/ne2k-pci.c @@ -231,14 +231,12 @@ static int __devinit ne2k_pci_init_one (struct pci_dev *pdev, irq = pdev->irq; if (!ioaddr || ((pci_resource_flags (pdev, 0) & IORESOURCE_IO) == 0)) { - dev_printk (KERN_ERR, &pdev->dev, - "no I/O resource at PCI BAR #0\n"); + dev_err(&pdev->dev, "no I/O resource at PCI BAR #0\n"); return -ENODEV; } if (request_region (ioaddr, NE_IO_EXTENT, DRV_NAME) == NULL) { - dev_printk (KERN_ERR, &pdev->dev, - "I/O resource 0x%x @ 0x%lx busy\n", + dev_err(&pdev->dev, "I/O resource 0x%x @ 0x%lx busy\n", NE_IO_EXTENT, ioaddr); return -EBUSY; } @@ -265,8 +263,7 @@ static int __devinit ne2k_pci_init_one (struct pci_dev *pdev, /* Allocate net_device, dev->priv; fill in 8390 specific dev fields. */ dev = alloc_ei_netdev(); if (!dev) { - dev_printk (KERN_ERR, &pdev->dev, - "cannot allocate ethernet device\n"); + dev_err(&pdev->dev, "cannot allocate ethernet device\n"); goto err_out_free_res; } SET_MODULE_OWNER(dev); @@ -284,7 +281,7 @@ static int __devinit ne2k_pci_init_one (struct pci_dev *pdev, while ((inb(ioaddr + EN0_ISR) & ENISR_RESET) == 0) /* Limit wait: '2' avoids jiffy roll-over. */ if (jiffies - reset_start_time > 2) { - dev_printk(KERN_ERR, &pdev->dev, + dev_err(&pdev->dev, "Card failure (no reset ack).\n"); goto err_out_free_netdev; } diff --git a/drivers/net/ns83820.c b/drivers/net/ns83820.c index d6e7ac2d0c9..d0ed8646902 100644 --- a/drivers/net/ns83820.c +++ b/drivers/net/ns83820.c @@ -1832,8 +1832,7 @@ static int __devinit ns83820_init_one(struct pci_dev *pci_dev, const struct pci_ } else if (!pci_set_dma_mask(pci_dev, DMA_32BIT_MASK)) { using_dac = 0; } else { - dev_printk(KERN_WARNING, &pci_dev->dev, - "pci_set_dma_mask failed!\n"); + dev_warn(&pci_dev->dev, "pci_set_dma_mask failed!\n"); return -ENODEV; } @@ -1856,8 +1855,7 @@ static int __devinit ns83820_init_one(struct pci_dev *pci_dev, const struct pci_ err = pci_enable_device(pci_dev); if (err) { - dev_printk(KERN_INFO, &pci_dev->dev, - "pci_enable_dev failed: %d\n", err); + dev_info(&pci_dev->dev, "pci_enable_dev failed: %d\n", err); goto out_free; } @@ -1886,8 +1884,7 @@ static int __devinit ns83820_init_one(struct pci_dev *pci_dev, const struct pci_ err = request_irq(pci_dev->irq, ns83820_irq, IRQF_SHARED, DRV_NAME, ndev); if (err) { - dev_printk(KERN_INFO, &pci_dev->dev, - "unable to register irq %d, err %d\n", + dev_info(&pci_dev->dev, "unable to register irq %d, err %d\n", pci_dev->irq, err); goto out_disable; } @@ -1902,8 +1899,7 @@ static int __devinit ns83820_init_one(struct pci_dev *pci_dev, const struct pci_ rtnl_lock(); err = dev_alloc_name(ndev, ndev->name); if (err < 0) { - dev_printk(KERN_INFO, &pci_dev->dev, - "unable to get netdev name: %d\n", err); + dev_info(&pci_dev->dev, "unable to get netdev name: %d\n", err); goto out_free_irq; } diff --git a/drivers/net/pci-skeleton.c b/drivers/net/pci-skeleton.c index 9c1ce318b07..e0e29396404 100644 --- a/drivers/net/pci-skeleton.c +++ b/drivers/net/pci-skeleton.c @@ -601,8 +601,7 @@ static int __devinit netdrv_init_board (struct pci_dev *pdev, /* dev zeroed in alloc_etherdev */ dev = alloc_etherdev (sizeof (*tp)); if (dev == NULL) { - dev_printk (KERN_ERR, &pdev->dev, - "unable to alloc new ethernet\n"); + dev_err(&pdev->dev, "unable to alloc new ethernet\n"); DPRINTK ("EXIT, returning -ENOMEM\n"); return -ENOMEM; } @@ -632,16 +631,14 @@ static int __devinit netdrv_init_board (struct pci_dev *pdev, /* make sure PCI base addr 0 is PIO */ if (!(pio_flags & IORESOURCE_IO)) { - dev_printk (KERN_ERR, &pdev->dev, - "region #0 not a PIO resource, aborting\n"); + dev_err(&pdev->dev, "region #0 not a PIO resource, aborting\n"); rc = -ENODEV; goto err_out; } /* make sure PCI base addr 1 is MMIO */ if (!(mmio_flags & IORESOURCE_MEM)) { - dev_printk (KERN_ERR, &pdev->dev, - "region #1 not an MMIO resource, aborting\n"); + dev_err(&pdev->dev, "region #1 not an MMIO resource, aborting\n"); rc = -ENODEV; goto err_out; } @@ -649,8 +646,7 @@ static int __devinit netdrv_init_board (struct pci_dev *pdev, /* check for weird/broken PCI region reporting */ if ((pio_len < NETDRV_MIN_IO_SIZE) || (mmio_len < NETDRV_MIN_IO_SIZE)) { - dev_printk (KERN_ERR, &pdev->dev, - "Invalid PCI region size(s), aborting\n"); + dev_err(&pdev->dev, "Invalid PCI region size(s), aborting\n"); rc = -ENODEV; goto err_out; } @@ -667,8 +663,7 @@ static int __devinit netdrv_init_board (struct pci_dev *pdev, /* ioremap MMIO region */ ioaddr = ioremap (mmio_start, mmio_len); if (ioaddr == NULL) { - dev_printk (KERN_ERR, &pdev->dev, - "cannot remap MMIO, aborting\n"); + dev_err(&pdev->dev, "cannot remap MMIO, aborting\n"); rc = -EIO; goto err_out_free_res; } diff --git a/drivers/net/r8169.c b/drivers/net/r8169.c index ae2a1f8f145..4c2f575faad 100644 --- a/drivers/net/r8169.c +++ b/drivers/net/r8169.c @@ -1406,8 +1406,7 @@ rtl8169_init_board(struct pci_dev *pdev, struct net_device **dev_out, dev = alloc_etherdev(sizeof (*tp)); if (dev == NULL) { if (netif_msg_drv(&debug)) - dev_printk(KERN_ERR, &pdev->dev, - "unable to alloc new ethernet\n"); + dev_err(&pdev->dev, "unable to alloc new ethernet\n"); goto err_out; } @@ -1420,7 +1419,7 @@ rtl8169_init_board(struct pci_dev *pdev, struct net_device **dev_out, rc = pci_enable_device(pdev); if (rc < 0) { if (netif_msg_probe(tp)) - dev_printk(KERN_ERR, &pdev->dev, "enable failure\n"); + dev_err(&pdev->dev, "enable failure\n"); goto err_out_free_dev; } @@ -1437,14 +1436,14 @@ rtl8169_init_board(struct pci_dev *pdev, struct net_device **dev_out, acpi_idle_state = pwr_command & PCI_PM_CTRL_STATE_MASK; } else { if (netif_msg_probe(tp)) - dev_printk(KERN_ERR, &pdev->dev, + dev_err(&pdev->dev, "PowerManagement capability not found.\n"); } /* make sure PCI base addr 1 is MMIO */ if (!(pci_resource_flags(pdev, 1) & IORESOURCE_MEM)) { if (netif_msg_probe(tp)) - dev_printk(KERN_ERR, &pdev->dev, + dev_err(&pdev->dev, "region #1 not an MMIO resource, aborting\n"); rc = -ENODEV; goto err_out_mwi; @@ -1452,7 +1451,7 @@ rtl8169_init_board(struct pci_dev *pdev, struct net_device **dev_out, /* check for weird/broken PCI region reporting */ if (pci_resource_len(pdev, 1) < R8169_REGS_SIZE) { if (netif_msg_probe(tp)) - dev_printk(KERN_ERR, &pdev->dev, + dev_err(&pdev->dev, "Invalid PCI region size(s), aborting\n"); rc = -ENODEV; goto err_out_mwi; @@ -1461,8 +1460,7 @@ rtl8169_init_board(struct pci_dev *pdev, struct net_device **dev_out, rc = pci_request_regions(pdev, MODULENAME); if (rc < 0) { if (netif_msg_probe(tp)) - dev_printk(KERN_ERR, &pdev->dev, - "could not request regions.\n"); + dev_err(&pdev->dev, "could not request regions.\n"); goto err_out_mwi; } @@ -1476,7 +1474,7 @@ rtl8169_init_board(struct pci_dev *pdev, struct net_device **dev_out, rc = pci_set_dma_mask(pdev, DMA_32BIT_MASK); if (rc < 0) { if (netif_msg_probe(tp)) - dev_printk(KERN_ERR, &pdev->dev, + dev_err(&pdev->dev, "DMA configuration failed.\n"); goto err_out_free_res; } @@ -1488,8 +1486,7 @@ rtl8169_init_board(struct pci_dev *pdev, struct net_device **dev_out, ioaddr = ioremap(pci_resource_start(pdev, 1), R8169_REGS_SIZE); if (ioaddr == NULL) { if (netif_msg_probe(tp)) - dev_printk(KERN_ERR, &pdev->dev, - "cannot remap MMIO, aborting\n"); + dev_err(&pdev->dev, "cannot remap MMIO, aborting\n"); rc = -EIO; goto err_out_free_res; } diff --git a/drivers/net/via-velocity.c b/drivers/net/via-velocity.c index 7e3b2a31814..f5b0078eb4a 100644 --- a/drivers/net/via-velocity.c +++ b/drivers/net/via-velocity.c @@ -695,14 +695,14 @@ static int __devinit velocity_found1(struct pci_dev *pdev, const struct pci_devi * can support more than MAX_UNITS. */ if (velocity_nics >= MAX_UNITS) { - dev_printk(KERN_NOTICE, &pdev->dev, "already found %d NICs.\n", + dev_notice(&pdev->dev, "already found %d NICs.\n", velocity_nics); return -ENODEV; } dev = alloc_etherdev(sizeof(struct velocity_info)); if (!dev) { - dev_printk(KERN_ERR, &pdev->dev, "allocate net device failed.\n"); + dev_err(&pdev->dev, "allocate net device failed.\n"); goto out; } @@ -739,7 +739,7 @@ static int __devinit velocity_found1(struct pci_dev *pdev, const struct pci_devi ret = pci_request_regions(pdev, VELOCITY_NAME); if (ret < 0) { - dev_printk(KERN_ERR, &pdev->dev, "No PCI resources.\n"); + dev_err(&pdev->dev, "No PCI resources.\n"); goto err_disable; } @@ -895,19 +895,19 @@ static int __devinit velocity_get_pci_info(struct velocity_info *vptr, struct pc vptr->memaddr = pci_resource_start(pdev, 1); if (!(pci_resource_flags(pdev, 0) & IORESOURCE_IO)) { - dev_printk(KERN_ERR, &pdev->dev, + dev_err(&pdev->dev, "region #0 is not an I/O resource, aborting.\n"); return -EINVAL; } if ((pci_resource_flags(pdev, 1) & IORESOURCE_IO)) { - dev_printk(KERN_ERR, &pdev->dev, + dev_err(&pdev->dev, "region #1 is an I/O resource, aborting.\n"); return -EINVAL; } if (pci_resource_len(pdev, 1) < VELOCITY_IO_SIZE) { - dev_printk(KERN_ERR, &pdev->dev, "region #1 is too small.\n"); + dev_err(&pdev->dev, "region #1 is too small.\n"); return -EINVAL; } vptr->pdev = pdev; -- cgit v1.2.3-70-g09d2 From d3cef4ee2207033b9f231da308d966f357af34da Mon Sep 17 00:00:00 2001 From: Faidon Liambotis Date: Sat, 10 Jun 2006 20:54:58 +0300 Subject: [PATCH] Add two PLX device IDs This patch adds device IDs for Symbol LA-4123 and Global Sun Tech GL24110P to the HostAP PLX driver. This is not tested with real hardware, but there is no reason why it shouldn't work. Please test. Signed-off-by: Faidon Liambotis Signed-off-by: John W. Linville --- drivers/net/wireless/hostap/hostap_plx.c | 2 ++ 1 file changed, 2 insertions(+) (limited to 'drivers/net') diff --git a/drivers/net/wireless/hostap/hostap_plx.c b/drivers/net/wireless/hostap/hostap_plx.c index 49860fa61c3..6dfa041be66 100644 --- a/drivers/net/wireless/hostap/hostap_plx.c +++ b/drivers/net/wireless/hostap/hostap_plx.c @@ -66,10 +66,12 @@ static struct pci_device_id prism2_plx_id_table[] __devinitdata = { PLXDEV(0x10b7, 0x7770, "3Com AirConnect PCI 777A"), PLXDEV(0x111a, 0x1023, "Siemens SpeedStream SS1023"), PLXDEV(0x126c, 0x8030, "Nortel emobility"), + PLXDEV(0x1562, 0x0001, "Symbol LA-4123"), PLXDEV(0x1385, 0x4100, "Netgear MA301"), PLXDEV(0x15e8, 0x0130, "National Datacomm NCP130 (PLX9052)"), PLXDEV(0x15e8, 0x0131, "National Datacomm NCP130 (TMD7160)"), PLXDEV(0x1638, 0x1100, "Eumitcom WL11000"), + PLXDEV(0x16ab, 0x1100, "Global Sun Tech GL24110P"), PLXDEV(0x16ab, 0x1101, "Global Sun Tech GL24110P (?)"), PLXDEV(0x16ab, 0x1102, "Linksys WPC11 with WDT11"), PLXDEV(0x16ab, 0x1103, "Longshine 8031"), -- cgit v1.2.3-70-g09d2 From e8d596972221aea55ae7f5c2bb7d5895039f664d Mon Sep 17 00:00:00 2001 From: Daniel Drake Date: Wed, 14 Jun 2006 17:51:14 +0200 Subject: [PATCH] bcm43xx: use softmac-suggested TX rate Use Softmac-suggested TX ratecode: ieee80211softmac_suggest_txrate() Signed-off-by: Daniel Drake Signed-off-by: Michael Buesch Signed-off-by: John W. Linville --- drivers/net/wireless/bcm43xx/bcm43xx_xmit.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) (limited to 'drivers/net') diff --git a/drivers/net/wireless/bcm43xx/bcm43xx_xmit.c b/drivers/net/wireless/bcm43xx/bcm43xx_xmit.c index d8ece28c079..6dbd855b364 100644 --- a/drivers/net/wireless/bcm43xx/bcm43xx_xmit.c +++ b/drivers/net/wireless/bcm43xx/bcm43xx_xmit.c @@ -296,11 +296,14 @@ void bcm43xx_generate_txhdr(struct bcm43xx_private *bcm, u16 control = 0; u16 wsec_rate = 0; u16 encrypt_frame; + const u16 ftype = WLAN_FC_GET_TYPE(le16_to_cpu(wireless_header->frame_ctl)); + const int is_mgt = (ftype == IEEE80211_FTYPE_MGMT); /* Now construct the TX header. */ memset(txhdr, 0, sizeof(*txhdr)); - bitrate = bcm->softmac->txrates.default_rate; + bitrate = ieee80211softmac_suggest_txrate(bcm->softmac, + is_multicast_ether_addr(wireless_header->addr1), is_mgt); ofdm_modulation = !(ieee80211_is_cck_rate(bitrate)); fallback_bitrate = bcm43xx_calc_fallback_rate(bitrate); fallback_ofdm_modulation = !(ieee80211_is_cck_rate(fallback_bitrate)); -- cgit v1.2.3-70-g09d2 From a1d79aaaa564abc19b7bf3a024bb371fa7648a15 Mon Sep 17 00:00:00 2001 From: Michael Buesch Date: Sat, 17 Jun 2006 15:19:05 +0200 Subject: [PATCH] bcm43xx: workaround init_board vs. IRQ race Place the Init-vs-IRQ workaround before any card register access, because we might not have the wireless core mapped at all times in init. So this will result in a Machine Check caused by a bus error. Signed-off-by: Michael Buesch Signed-off-by: John W. Linville --- drivers/net/wireless/bcm43xx/bcm43xx_main.c | 27 ++++++++++++++------------- 1 file changed, 14 insertions(+), 13 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/wireless/bcm43xx/bcm43xx_main.c b/drivers/net/wireless/bcm43xx/bcm43xx_main.c index d8f5600578b..673ab11d92a 100644 --- a/drivers/net/wireless/bcm43xx/bcm43xx_main.c +++ b/drivers/net/wireless/bcm43xx/bcm43xx_main.c @@ -1885,6 +1885,15 @@ static irqreturn_t bcm43xx_interrupt_handler(int irq, void *dev_id, struct pt_re spin_lock(&bcm->irq_lock); + /* Only accept IRQs, if we are initialized properly. + * This avoids an RX race while initializing. + * We should probably not enable IRQs before we are initialized + * completely, but some careful work is needed to fix this. I think it + * is best to stay with this cheap workaround for now... . + */ + if (unlikely(bcm43xx_status(bcm) != BCM43xx_STAT_INITIALIZED)) + goto out; + reason = bcm43xx_read32(bcm, BCM43xx_MMIO_GEN_IRQ_REASON); if (reason == 0xffffffff) { /* irq not for us (shared irq) */ @@ -1906,19 +1915,11 @@ static irqreturn_t bcm43xx_interrupt_handler(int irq, void *dev_id, struct pt_re bcm43xx_interrupt_ack(bcm, reason); - /* Only accept IRQs, if we are initialized properly. - * This avoids an RX race while initializing. - * We should probably not enable IRQs before we are initialized - * completely, but some careful work is needed to fix this. I think it - * is best to stay with this cheap workaround for now... . - */ - if (likely(bcm43xx_status(bcm) == BCM43xx_STAT_INITIALIZED)) { - /* disable all IRQs. They are enabled again in the bottom half. */ - bcm->irq_savedstate = bcm43xx_interrupt_disable(bcm, BCM43xx_IRQ_ALL); - /* save the reason code and call our bottom half. */ - bcm->irq_reason = reason; - tasklet_schedule(&bcm->isr_tasklet); - } + /* disable all IRQs. They are enabled again in the bottom half. */ + bcm->irq_savedstate = bcm43xx_interrupt_disable(bcm, BCM43xx_IRQ_ALL); + /* save the reason code and call our bottom half. */ + bcm->irq_reason = reason; + tasklet_schedule(&bcm->isr_tasklet); out: mmiowb(); -- cgit v1.2.3-70-g09d2 From fc8fd3400b716615933a47be453839d190b235bd Mon Sep 17 00:00:00 2001 From: Larry Finger Date: Sun, 25 Jun 2006 21:32:21 -0500 Subject: [PATCH] Convert bcm43xx-softmac to use the ieee80211_is_valid_channel routine The current version of bcm43xx-softmac uses local routines to check if a channel is valid. As noted in the comments, these routines do not take any regulatory information into account. This patch converts the code to use the equivalent routine in ieee80211, which is being converted to know about regulatory information. Signed-Off-By: Larry Finger Signed-off-by: John W. Linville --- drivers/net/wireless/bcm43xx/bcm43xx_main.h | 24 ------------------------ drivers/net/wireless/bcm43xx/bcm43xx_radio.c | 7 ++----- drivers/net/wireless/bcm43xx/bcm43xx_wx.c | 2 +- 3 files changed, 3 insertions(+), 30 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/wireless/bcm43xx/bcm43xx_main.h b/drivers/net/wireless/bcm43xx/bcm43xx_main.h index 30a202b258b..116493671f8 100644 --- a/drivers/net/wireless/bcm43xx/bcm43xx_main.h +++ b/drivers/net/wireless/bcm43xx/bcm43xx_main.h @@ -112,30 +112,6 @@ int bcm43xx_channel_to_freq(struct bcm43xx_private *bcm, return bcm43xx_channel_to_freq_bg(channel); } -/* Lightweight function to check if a channel number is valid. - * Note that this does _NOT_ check for geographical restrictions! - */ -static inline -int bcm43xx_is_valid_channel_a(u8 channel) -{ - return (channel >= IEEE80211_52GHZ_MIN_CHANNEL - && channel <= IEEE80211_52GHZ_MAX_CHANNEL); -} -static inline -int bcm43xx_is_valid_channel_bg(u8 channel) -{ - return (channel >= IEEE80211_24GHZ_MIN_CHANNEL - && channel <= IEEE80211_24GHZ_MAX_CHANNEL); -} -static inline -int bcm43xx_is_valid_channel(struct bcm43xx_private *bcm, - u8 channel) -{ - if (bcm43xx_current_phy(bcm)->type == BCM43xx_PHYTYPE_A) - return bcm43xx_is_valid_channel_a(channel); - return bcm43xx_is_valid_channel_bg(channel); -} - void bcm43xx_tsf_read(struct bcm43xx_private *bcm, u64 *tsf); void bcm43xx_tsf_write(struct bcm43xx_private *bcm, u64 tsf); diff --git a/drivers/net/wireless/bcm43xx/bcm43xx_radio.c b/drivers/net/wireless/bcm43xx/bcm43xx_radio.c index af5c0bff169..bb9c484d7e1 100644 --- a/drivers/net/wireless/bcm43xx/bcm43xx_radio.c +++ b/drivers/net/wireless/bcm43xx/bcm43xx_radio.c @@ -1594,11 +1594,11 @@ int bcm43xx_radio_selectchannel(struct bcm43xx_private *bcm, u16 r8, tmp; u16 freq; + if (!ieee80211_is_valid_channel(bcm->ieee, channel)) + return -EINVAL; if ((radio->manufact == 0x17F) && (radio->version == 0x2060) && (radio->revision == 1)) { - if (channel > 200) - return -EINVAL; freq = channel2freq_a(channel); r8 = bcm43xx_radio_read16(bcm, 0x0008); @@ -1651,9 +1651,6 @@ int bcm43xx_radio_selectchannel(struct bcm43xx_private *bcm, TODO(); //TODO: TSSI2dbm workaround bcm43xx_phy_xmitpower(bcm);//FIXME correct? } else { - if ((channel < 1) || (channel > 14)) - return -EINVAL; - if (synthetic_pu_workaround) bcm43xx_synth_pu_workaround(bcm, channel); diff --git a/drivers/net/wireless/bcm43xx/bcm43xx_wx.c b/drivers/net/wireless/bcm43xx/bcm43xx_wx.c index c35cb3a0777..5c36e29efff 100644 --- a/drivers/net/wireless/bcm43xx/bcm43xx_wx.c +++ b/drivers/net/wireless/bcm43xx/bcm43xx_wx.c @@ -119,7 +119,7 @@ static int bcm43xx_wx_set_channelfreq(struct net_device *net_dev, channel = bcm43xx_freq_to_channel(bcm, data->freq.m); freq = data->freq.m; } - if (!bcm43xx_is_valid_channel(bcm, channel)) + if (!ieee80211_is_valid_channel(bcm->ieee, channel)) goto out_unlock; if (bcm43xx_status(bcm) == BCM43xx_STAT_INITIALIZED) { //ieee80211softmac_disassoc(softmac, $REASON); -- cgit v1.2.3-70-g09d2 From 4359219425a0918a72775480e125fbb077de338d Mon Sep 17 00:00:00 2001 From: Daniel Drake Date: Fri, 16 Jun 2006 20:50:22 +0100 Subject: [PATCH] bcm43xx: enable shared key authentication I recently patched softmac to enable shared key authentication. This small patch will enable crazy or unfortunate bcm43xx users to use this new capability. Signed-off-by: Daniel Drake Signed-off-by: John W. Linville --- drivers/net/wireless/bcm43xx/bcm43xx_main.c | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'drivers/net') diff --git a/drivers/net/wireless/bcm43xx/bcm43xx_main.c b/drivers/net/wireless/bcm43xx/bcm43xx_main.c index 673ab11d92a..e1c5a939bca 100644 --- a/drivers/net/wireless/bcm43xx/bcm43xx_main.c +++ b/drivers/net/wireless/bcm43xx/bcm43xx_main.c @@ -3699,6 +3699,10 @@ static void bcm43xx_ieee80211_set_security(struct net_device *net_dev, secinfo->encrypt = sec->encrypt; dprintk(", .encrypt = %d", sec->encrypt); } + if (sec->flags & SEC_AUTH_MODE) { + secinfo->auth_mode = sec->auth_mode; + dprintk(", .auth_mode = %d\n", sec->auth_mode); + } dprintk("\n"); if (bcm43xx_status(bcm) == BCM43xx_STAT_INITIALIZED && !bcm->ieee->host_encrypt) { -- cgit v1.2.3-70-g09d2 From e85d0918b54fbd9b38003752f7d665416b06edd8 Mon Sep 17 00:00:00 2001 From: Daniel Drake Date: Fri, 2 Jun 2006 17:11:32 +0100 Subject: [PATCH] ZyDAS ZD1211 USB-WLAN driver There are 60+ USB wifi adapters available on the market based on the ZyDAS ZD1211 chip. Unlike the predecessor (ZD1201), ZD1211 does not have a hardware MAC, so most data operations are coordinated by the device driver. The ZD1211 chip sits alongside an RF transceiver which is also controlled by the driver. Our driver currently supports 2 RF types, we know of one other available in a few marketed products which we will be supporting soon. Our driver also supports the newer revision of ZD1211, called ZD1211B. The initialization and RF operations are slightly different for the new revision, but the main difference is 802.11e support. Our driver does not support the QoS features yet, but we think we know how to use them. This driver is based on ZyDAS's own GPL driver available from www.zydas.com.tw. ZyDAS engineers have been responsive and supportive of our efforts, so thumbs up to them. Additionally, the firmware is redistributable and they have provided device specs. This driver has been written primarily by Ulrich Kunitz and myself. Graham Gower, Greg KH, Remco and Bryan Rittmeyer have also contributed. The developers of ieee80211 and softmac have made our lives so much easier- thanks! We maintain a small info-page: http://zd1211.ath.cx/wiki/DriverRewrite If there is enough time for review, we would like to aim for inclusion in 2.6.18. The driver works nicely as a STA, and can connect to both open and encrypted networks (we are using software-based encryption for now). We will work towards supporting more advanced features in the future (ad-hoc, master mode, 802.11a, ...). Signed-off-by: Daniel Drake Signed-off-by: John W. Linville --- drivers/net/wireless/Kconfig | 1 + drivers/net/wireless/Makefile | 1 + drivers/net/wireless/zd1211rw/Kconfig | 19 + drivers/net/wireless/zd1211rw/Makefile | 11 + drivers/net/wireless/zd1211rw/zd_chip.c | 1615 ++++++++++++++++++++++++++ drivers/net/wireless/zd1211rw/zd_chip.h | 825 +++++++++++++ drivers/net/wireless/zd1211rw/zd_def.h | 48 + drivers/net/wireless/zd1211rw/zd_ieee80211.c | 191 +++ drivers/net/wireless/zd1211rw/zd_ieee80211.h | 85 ++ drivers/net/wireless/zd1211rw/zd_mac.c | 1055 +++++++++++++++++ drivers/net/wireless/zd1211rw/zd_mac.h | 190 +++ drivers/net/wireless/zd1211rw/zd_netdev.c | 267 +++++ drivers/net/wireless/zd1211rw/zd_netdev.h | 45 + drivers/net/wireless/zd1211rw/zd_rf.c | 151 +++ drivers/net/wireless/zd1211rw/zd_rf.h | 82 ++ drivers/net/wireless/zd1211rw/zd_rf_al2230.c | 308 +++++ drivers/net/wireless/zd1211rw/zd_rf_rf2959.c | 279 +++++ drivers/net/wireless/zd1211rw/zd_types.h | 71 ++ drivers/net/wireless/zd1211rw/zd_usb.c | 1316 +++++++++++++++++++++ drivers/net/wireless/zd1211rw/zd_usb.h | 240 ++++ drivers/net/wireless/zd1211rw/zd_util.c | 82 ++ drivers/net/wireless/zd1211rw/zd_util.h | 29 + 22 files changed, 6911 insertions(+) create mode 100644 drivers/net/wireless/zd1211rw/Kconfig create mode 100644 drivers/net/wireless/zd1211rw/Makefile create mode 100644 drivers/net/wireless/zd1211rw/zd_chip.c create mode 100644 drivers/net/wireless/zd1211rw/zd_chip.h create mode 100644 drivers/net/wireless/zd1211rw/zd_def.h create mode 100644 drivers/net/wireless/zd1211rw/zd_ieee80211.c create mode 100644 drivers/net/wireless/zd1211rw/zd_ieee80211.h create mode 100644 drivers/net/wireless/zd1211rw/zd_mac.c create mode 100644 drivers/net/wireless/zd1211rw/zd_mac.h create mode 100644 drivers/net/wireless/zd1211rw/zd_netdev.c create mode 100644 drivers/net/wireless/zd1211rw/zd_netdev.h create mode 100644 drivers/net/wireless/zd1211rw/zd_rf.c create mode 100644 drivers/net/wireless/zd1211rw/zd_rf.h create mode 100644 drivers/net/wireless/zd1211rw/zd_rf_al2230.c create mode 100644 drivers/net/wireless/zd1211rw/zd_rf_rf2959.c create mode 100644 drivers/net/wireless/zd1211rw/zd_types.h create mode 100644 drivers/net/wireless/zd1211rw/zd_usb.c create mode 100644 drivers/net/wireless/zd1211rw/zd_usb.h create mode 100644 drivers/net/wireless/zd1211rw/zd_util.c create mode 100644 drivers/net/wireless/zd1211rw/zd_util.h (limited to 'drivers/net') diff --git a/drivers/net/wireless/Kconfig b/drivers/net/wireless/Kconfig index 30ec235e693..fa9d2c4edc9 100644 --- a/drivers/net/wireless/Kconfig +++ b/drivers/net/wireless/Kconfig @@ -550,6 +550,7 @@ config USB_ZD1201 source "drivers/net/wireless/hostap/Kconfig" source "drivers/net/wireless/bcm43xx/Kconfig" +source "drivers/net/wireless/zd1211rw/Kconfig" # yes, this works even when no drivers are selected config NET_WIRELESS diff --git a/drivers/net/wireless/Makefile b/drivers/net/wireless/Makefile index 512603de309..c613af17a15 100644 --- a/drivers/net/wireless/Makefile +++ b/drivers/net/wireless/Makefile @@ -36,6 +36,7 @@ obj-$(CONFIG_PRISM54) += prism54/ obj-$(CONFIG_HOSTAP) += hostap/ obj-$(CONFIG_BCM43XX) += bcm43xx/ +obj-$(CONFIG_ZD1211RW) += zd1211rw/ # 16-bit wireless PCMCIA client drivers obj-$(CONFIG_PCMCIA_RAYCS) += ray_cs.o diff --git a/drivers/net/wireless/zd1211rw/Kconfig b/drivers/net/wireless/zd1211rw/Kconfig new file mode 100644 index 00000000000..66ed55bc546 --- /dev/null +++ b/drivers/net/wireless/zd1211rw/Kconfig @@ -0,0 +1,19 @@ +config ZD1211RW + tristate "ZyDAS ZD1211/ZD1211B USB-wireless support" + depends on USB && IEEE80211 && IEEE80211_SOFTMAC && NET_RADIO && EXPERIMENTAL + select FW_LOADER + ---help--- + This is an experimental driver for the ZyDAS ZD1211/ZD1211B wireless + chip, present in many USB-wireless adapters. + + Device firmware is required alongside this driver. You can download the + firmware distribution from http://zd1211.ath.cx/get-firmware + +config ZD1211RW_DEBUG + bool "ZyDAS ZD1211 debugging" + depends on ZD1211RW + ---help--- + ZD1211 debugging messages. Choosing Y will result in additional debug + messages being saved to your kernel logs, which may help debug any + problems. + diff --git a/drivers/net/wireless/zd1211rw/Makefile b/drivers/net/wireless/zd1211rw/Makefile new file mode 100644 index 00000000000..500314fc74d --- /dev/null +++ b/drivers/net/wireless/zd1211rw/Makefile @@ -0,0 +1,11 @@ +obj-$(CONFIG_ZD1211RW) += zd1211rw.o + +zd1211rw-objs := zd_chip.o zd_ieee80211.o \ + zd_mac.o zd_netdev.o \ + zd_rf_al2230.o zd_rf_rf2959.o \ + zd_rf.o zd_usb.o zd_util.o + +ifeq ($(CONFIG_ZD1211RW_DEBUG),y) +EXTRA_CFLAGS += -DDEBUG +endif + diff --git a/drivers/net/wireless/zd1211rw/zd_chip.c b/drivers/net/wireless/zd1211rw/zd_chip.c new file mode 100644 index 00000000000..efc9c4bd826 --- /dev/null +++ b/drivers/net/wireless/zd1211rw/zd_chip.c @@ -0,0 +1,1615 @@ +/* zd_chip.c + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +/* This file implements all the hardware specific functions for the ZD1211 + * and ZD1211B chips. Support for the ZD1211B was possible after Timothy + * Legge sent me a ZD1211B device. Thank you Tim. -- Uli + */ + +#include +#include + +#include "zd_def.h" +#include "zd_chip.h" +#include "zd_ieee80211.h" +#include "zd_mac.h" +#include "zd_rf.h" +#include "zd_util.h" + +void zd_chip_init(struct zd_chip *chip, + struct net_device *netdev, + struct usb_interface *intf) +{ + memset(chip, 0, sizeof(*chip)); + mutex_init(&chip->mutex); + zd_usb_init(&chip->usb, netdev, intf); + zd_rf_init(&chip->rf); +} + +void zd_chip_clear(struct zd_chip *chip) +{ + mutex_lock(&chip->mutex); + zd_usb_clear(&chip->usb); + zd_rf_clear(&chip->rf); + mutex_unlock(&chip->mutex); + mutex_destroy(&chip->mutex); + memset(chip, 0, sizeof(*chip)); +} + +static int scnprint_mac_oui(const u8 *addr, char *buffer, size_t size) +{ + return scnprintf(buffer, size, "%02x-%02x-%02x", + addr[0], addr[1], addr[2]); +} + +/* Prints an identifier line, which will support debugging. */ +static int scnprint_id(struct zd_chip *chip, char *buffer, size_t size) +{ + int i = 0; + + i = scnprintf(buffer, size, "zd1211%s chip ", + chip->is_zd1211b ? "b" : ""); + i += zd_usb_scnprint_id(&chip->usb, buffer+i, size-i); + i += scnprintf(buffer+i, size-i, " "); + i += scnprint_mac_oui(chip->e2p_mac, buffer+i, size-i); + i += scnprintf(buffer+i, size-i, " "); + i += zd_rf_scnprint_id(&chip->rf, buffer+i, size-i); + i += scnprintf(buffer+i, size-i, " pa%1x %c%c%c", chip->pa_type, + chip->patch_cck_gain ? 'g' : '-', + chip->patch_cr157 ? '7' : '-', + chip->patch_6m_band_edge ? '6' : '-'); + return i; +} + +static void print_id(struct zd_chip *chip) +{ + char buffer[80]; + + scnprint_id(chip, buffer, sizeof(buffer)); + buffer[sizeof(buffer)-1] = 0; + dev_info(zd_chip_dev(chip), "%s\n", buffer); +} + +/* Read a variable number of 32-bit values. Parameter count is not allowed to + * exceed USB_MAX_IOREAD32_COUNT. + */ +int zd_ioread32v_locked(struct zd_chip *chip, u32 *values, const zd_addr_t *addr, + unsigned int count) +{ + int r; + int i; + zd_addr_t *a16 = (zd_addr_t *)NULL; + u16 *v16; + unsigned int count16; + + if (count > USB_MAX_IOREAD32_COUNT) + return -EINVAL; + + /* Allocate a single memory block for values and addresses. */ + count16 = 2*count; + a16 = (zd_addr_t *)kmalloc(count16 * (sizeof(zd_addr_t) + sizeof(u16)), + GFP_NOFS); + if (!a16) { + dev_dbg_f(zd_chip_dev(chip), + "error ENOMEM in allocation of a16\n"); + r = -ENOMEM; + goto out; + } + v16 = (u16 *)(a16 + count16); + + for (i = 0; i < count; i++) { + int j = 2*i; + /* We read the high word always first. */ + a16[j] = zd_inc_word(addr[i]); + a16[j+1] = addr[i]; + } + + r = zd_ioread16v_locked(chip, v16, a16, count16); + if (r) { + dev_dbg_f(zd_chip_dev(chip), + "error: zd_ioread16v_locked. Error number %d\n", r); + goto out; + } + + for (i = 0; i < count; i++) { + int j = 2*i; + values[i] = (v16[j] << 16) | v16[j+1]; + } + +out: + kfree((void *)a16); + return r; +} + +int _zd_iowrite32v_locked(struct zd_chip *chip, const struct zd_ioreq32 *ioreqs, + unsigned int count) +{ + int i, j, r; + struct zd_ioreq16 *ioreqs16; + unsigned int count16; + + ZD_ASSERT(mutex_is_locked(&chip->mutex)); + + if (count == 0) + return 0; + if (count > USB_MAX_IOWRITE32_COUNT) + return -EINVAL; + + /* Allocate a single memory block for values and addresses. */ + count16 = 2*count; + ioreqs16 = kmalloc(count16 * sizeof(struct zd_ioreq16), GFP_NOFS); + if (!ioreqs16) { + r = -ENOMEM; + dev_dbg_f(zd_chip_dev(chip), + "error %d in ioreqs16 allocation\n", r); + goto out; + } + + for (i = 0; i < count; i++) { + j = 2*i; + /* We write the high word always first. */ + ioreqs16[j].value = ioreqs[i].value >> 16; + ioreqs16[j].addr = zd_inc_word(ioreqs[i].addr); + ioreqs16[j+1].value = ioreqs[i].value; + ioreqs16[j+1].addr = ioreqs[i].addr; + } + + r = zd_usb_iowrite16v(&chip->usb, ioreqs16, count16); +#ifdef DEBUG + if (r) { + dev_dbg_f(zd_chip_dev(chip), + "error %d in zd_usb_write16v\n", r); + } +#endif /* DEBUG */ +out: + kfree(ioreqs16); + return r; +} + +int zd_iowrite16a_locked(struct zd_chip *chip, + const struct zd_ioreq16 *ioreqs, unsigned int count) +{ + int r; + unsigned int i, j, t, max; + + ZD_ASSERT(mutex_is_locked(&chip->mutex)); + for (i = 0; i < count; i += j + t) { + t = 0; + max = count-i; + if (max > USB_MAX_IOWRITE16_COUNT) + max = USB_MAX_IOWRITE16_COUNT; + for (j = 0; j < max; j++) { + if (!ioreqs[i+j].addr) { + t = 1; + break; + } + } + + r = zd_usb_iowrite16v(&chip->usb, &ioreqs[i], j); + if (r) { + dev_dbg_f(zd_chip_dev(chip), + "error zd_usb_iowrite16v. Error number %d\n", + r); + return r; + } + } + + return 0; +} + +/* Writes a variable number of 32 bit registers. The functions will split + * that in several USB requests. A split can be forced by inserting an IO + * request with an zero address field. + */ +int zd_iowrite32a_locked(struct zd_chip *chip, + const struct zd_ioreq32 *ioreqs, unsigned int count) +{ + int r; + unsigned int i, j, t, max; + + for (i = 0; i < count; i += j + t) { + t = 0; + max = count-i; + if (max > USB_MAX_IOWRITE32_COUNT) + max = USB_MAX_IOWRITE32_COUNT; + for (j = 0; j < max; j++) { + if (!ioreqs[i+j].addr) { + t = 1; + break; + } + } + + r = _zd_iowrite32v_locked(chip, &ioreqs[i], j); + if (r) { + dev_dbg_f(zd_chip_dev(chip), + "error _zd_iowrite32v_locked." + " Error number %d\n", r); + return r; + } + } + + return 0; +} + +int zd_ioread16(struct zd_chip *chip, zd_addr_t addr, u16 *value) +{ + int r; + + ZD_ASSERT(!mutex_is_locked(&chip->mutex)); + mutex_lock(&chip->mutex); + r = zd_ioread16_locked(chip, value, addr); + mutex_unlock(&chip->mutex); + return r; +} + +int zd_ioread32(struct zd_chip *chip, zd_addr_t addr, u32 *value) +{ + int r; + + ZD_ASSERT(!mutex_is_locked(&chip->mutex)); + mutex_lock(&chip->mutex); + r = zd_ioread32_locked(chip, value, addr); + mutex_unlock(&chip->mutex); + return r; +} + +int zd_iowrite16(struct zd_chip *chip, zd_addr_t addr, u16 value) +{ + int r; + + ZD_ASSERT(!mutex_is_locked(&chip->mutex)); + mutex_lock(&chip->mutex); + r = zd_iowrite16_locked(chip, value, addr); + mutex_unlock(&chip->mutex); + return r; +} + +int zd_iowrite32(struct zd_chip *chip, zd_addr_t addr, u32 value) +{ + int r; + + ZD_ASSERT(!mutex_is_locked(&chip->mutex)); + mutex_lock(&chip->mutex); + r = zd_iowrite32_locked(chip, value, addr); + mutex_unlock(&chip->mutex); + return r; +} + +int zd_ioread32v(struct zd_chip *chip, const zd_addr_t *addresses, + u32 *values, unsigned int count) +{ + int r; + + ZD_ASSERT(!mutex_is_locked(&chip->mutex)); + mutex_lock(&chip->mutex); + r = zd_ioread32v_locked(chip, values, addresses, count); + mutex_unlock(&chip->mutex); + return r; +} + +int zd_iowrite32a(struct zd_chip *chip, const struct zd_ioreq32 *ioreqs, + unsigned int count) +{ + int r; + + ZD_ASSERT(!mutex_is_locked(&chip->mutex)); + mutex_lock(&chip->mutex); + r = zd_iowrite32a_locked(chip, ioreqs, count); + mutex_unlock(&chip->mutex); + return r; +} + +static int read_pod(struct zd_chip *chip, u8 *rf_type) +{ + int r; + u32 value; + + ZD_ASSERT(mutex_is_locked(&chip->mutex)); + r = zd_ioread32_locked(chip, &value, E2P_POD); + if (r) + goto error; + dev_dbg_f(zd_chip_dev(chip), "E2P_POD %#010x\n", value); + + /* FIXME: AL2230 handling (Bit 7 in POD) */ + *rf_type = value & 0x0f; + chip->pa_type = (value >> 16) & 0x0f; + chip->patch_cck_gain = (value >> 8) & 0x1; + chip->patch_cr157 = (value >> 13) & 0x1; + chip->patch_6m_band_edge = (value >> 21) & 0x1; + + dev_dbg_f(zd_chip_dev(chip), + "RF %s %#01x PA type %#01x patch CCK %d patch CR157 %d " + "patch 6M %d\n", + zd_rf_name(*rf_type), *rf_type, + chip->pa_type, chip->patch_cck_gain, + chip->patch_cr157, chip->patch_6m_band_edge); + return 0; +error: + *rf_type = 0; + chip->pa_type = 0; + chip->patch_cck_gain = 0; + chip->patch_cr157 = 0; + chip->patch_6m_band_edge = 0; + return r; +} + +static int _read_mac_addr(struct zd_chip *chip, u8 *mac_addr, + const zd_addr_t *addr) +{ + int r; + u32 parts[2]; + + r = zd_ioread32v_locked(chip, parts, (const zd_addr_t *)addr, 2); + if (r) { + dev_dbg_f(zd_chip_dev(chip), + "error: couldn't read e2p macs. Error number %d\n", r); + return r; + } + + mac_addr[0] = parts[0]; + mac_addr[1] = parts[0] >> 8; + mac_addr[2] = parts[0] >> 16; + mac_addr[3] = parts[0] >> 24; + mac_addr[4] = parts[1]; + mac_addr[5] = parts[1] >> 8; + + return 0; +} + +static int read_e2p_mac_addr(struct zd_chip *chip) +{ + static const zd_addr_t addr[2] = { E2P_MAC_ADDR_P1, E2P_MAC_ADDR_P2 }; + + ZD_ASSERT(mutex_is_locked(&chip->mutex)); + return _read_mac_addr(chip, chip->e2p_mac, (const zd_addr_t *)addr); +} + +/* MAC address: if custom mac addresses are to to be used CR_MAC_ADDR_P1 and + * CR_MAC_ADDR_P2 must be overwritten + */ +void zd_get_e2p_mac_addr(struct zd_chip *chip, u8 *mac_addr) +{ + mutex_lock(&chip->mutex); + memcpy(mac_addr, chip->e2p_mac, ETH_ALEN); + mutex_unlock(&chip->mutex); +} + +static int read_mac_addr(struct zd_chip *chip, u8 *mac_addr) +{ + static const zd_addr_t addr[2] = { CR_MAC_ADDR_P1, CR_MAC_ADDR_P2 }; + return _read_mac_addr(chip, mac_addr, (const zd_addr_t *)addr); +} + +int zd_read_mac_addr(struct zd_chip *chip, u8 *mac_addr) +{ + int r; + + dev_dbg_f(zd_chip_dev(chip), "\n"); + mutex_lock(&chip->mutex); + r = read_mac_addr(chip, mac_addr); + mutex_unlock(&chip->mutex); + return r; +} + +int zd_write_mac_addr(struct zd_chip *chip, const u8 *mac_addr) +{ + int r; + struct zd_ioreq32 reqs[2] = { + [0] = { .addr = CR_MAC_ADDR_P1 }, + [1] = { .addr = CR_MAC_ADDR_P2 }, + }; + + reqs[0].value = (mac_addr[3] << 24) + | (mac_addr[2] << 16) + | (mac_addr[1] << 8) + | mac_addr[0]; + reqs[1].value = (mac_addr[5] << 8) + | mac_addr[4]; + + dev_dbg_f(zd_chip_dev(chip), + "mac addr " MAC_FMT "\n", MAC_ARG(mac_addr)); + + mutex_lock(&chip->mutex); + r = zd_iowrite32a_locked(chip, reqs, ARRAY_SIZE(reqs)); +#ifdef DEBUG + { + u8 tmp[ETH_ALEN]; + read_mac_addr(chip, tmp); + } +#endif /* DEBUG */ + mutex_unlock(&chip->mutex); + return r; +} + +int zd_read_regdomain(struct zd_chip *chip, u8 *regdomain) +{ + int r; + u32 value; + + mutex_lock(&chip->mutex); + r = zd_ioread32_locked(chip, &value, E2P_SUBID); + mutex_unlock(&chip->mutex); + if (r) + return r; + + *regdomain = value >> 16; + dev_dbg_f(zd_chip_dev(chip), "regdomain: %#04x\n", *regdomain); + + return 0; +} + +static int read_values(struct zd_chip *chip, u8 *values, size_t count, + zd_addr_t e2p_addr, u32 guard) +{ + int r; + int i; + u32 v; + + ZD_ASSERT(mutex_is_locked(&chip->mutex)); + for (i = 0;;) { + r = zd_ioread32_locked(chip, &v, e2p_addr+i/2); + if (r) + return r; + v -= guard; + if (i+4 < count) { + values[i++] = v; + values[i++] = v >> 8; + values[i++] = v >> 16; + values[i++] = v >> 24; + continue; + } + for (;i < count; i++) + values[i] = v >> (8*(i%3)); + return 0; + } +} + +static int read_pwr_cal_values(struct zd_chip *chip) +{ + return read_values(chip, chip->pwr_cal_values, + E2P_CHANNEL_COUNT, E2P_PWR_CAL_VALUE1, + 0); +} + +static int read_pwr_int_values(struct zd_chip *chip) +{ + return read_values(chip, chip->pwr_int_values, + E2P_CHANNEL_COUNT, E2P_PWR_INT_VALUE1, + E2P_PWR_INT_GUARD); +} + +static int read_ofdm_cal_values(struct zd_chip *chip) +{ + int r; + int i; + static const zd_addr_t addresses[] = { + E2P_36M_CAL_VALUE1, + E2P_48M_CAL_VALUE1, + E2P_54M_CAL_VALUE1, + }; + + for (i = 0; i < 3; i++) { + r = read_values(chip, chip->ofdm_cal_values[i], + E2P_CHANNEL_COUNT, addresses[i], 0); + if (r) + return r; + } + return 0; +} + +static int read_cal_int_tables(struct zd_chip *chip) +{ + int r; + + r = read_pwr_cal_values(chip); + if (r) + return r; + r = read_pwr_int_values(chip); + if (r) + return r; + r = read_ofdm_cal_values(chip); + if (r) + return r; + return 0; +} + +/* phy means physical registers */ +int zd_chip_lock_phy_regs(struct zd_chip *chip) +{ + int r; + u32 tmp; + + ZD_ASSERT(mutex_is_locked(&chip->mutex)); + r = zd_ioread32_locked(chip, &tmp, CR_REG1); + if (r) { + dev_err(zd_chip_dev(chip), "error ioread32(CR_REG1): %d\n", r); + return r; + } + + dev_dbg_f(zd_chip_dev(chip), + "CR_REG1: 0x%02x -> 0x%02x\n", tmp, tmp & ~UNLOCK_PHY_REGS); + tmp &= ~UNLOCK_PHY_REGS; + + r = zd_iowrite32_locked(chip, tmp, CR_REG1); + if (r) + dev_err(zd_chip_dev(chip), "error iowrite32(CR_REG1): %d\n", r); + return r; +} + +int zd_chip_unlock_phy_regs(struct zd_chip *chip) +{ + int r; + u32 tmp; + + ZD_ASSERT(mutex_is_locked(&chip->mutex)); + r = zd_ioread32_locked(chip, &tmp, CR_REG1); + if (r) { + dev_err(zd_chip_dev(chip), + "error ioread32(CR_REG1): %d\n", r); + return r; + } + + dev_dbg_f(zd_chip_dev(chip), + "CR_REG1: 0x%02x -> 0x%02x\n", tmp, tmp | UNLOCK_PHY_REGS); + tmp |= UNLOCK_PHY_REGS; + + r = zd_iowrite32_locked(chip, tmp, CR_REG1); + if (r) + dev_err(zd_chip_dev(chip), "error iowrite32(CR_REG1): %d\n", r); + return r; +} + +/* CR157 can be optionally patched by the EEPROM */ +static int patch_cr157(struct zd_chip *chip) +{ + int r; + u32 value; + + if (!chip->patch_cr157) + return 0; + + r = zd_ioread32_locked(chip, &value, E2P_PHY_REG); + if (r) + return r; + + dev_dbg_f(zd_chip_dev(chip), "patching value %x\n", value >> 8); + return zd_iowrite32_locked(chip, value >> 8, CR157); +} + +/* + * 6M band edge can be optionally overwritten for certain RF's + * Vendor driver says: for FCC regulation, enabled per HWFeature 6M band edge + * bit (for AL2230, AL2230S) + */ +static int patch_6m_band_edge(struct zd_chip *chip, int channel) +{ + struct zd_ioreq16 ioreqs[] = { + { CR128, 0x14 }, { CR129, 0x12 }, { CR130, 0x10 }, + { CR47, 0x1e }, + }; + + if (!chip->patch_6m_band_edge || !chip->rf.patch_6m_band_edge) + return 0; + + /* FIXME: Channel 11 is not the edge for all regulatory domains. */ + if (channel == 1 || channel == 11) + ioreqs[0].value = 0x12; + + dev_dbg_f(zd_chip_dev(chip), "patching for channel %d\n", channel); + return zd_iowrite16a_locked(chip, ioreqs, ARRAY_SIZE(ioreqs)); +} + +static int zd1211_hw_reset_phy(struct zd_chip *chip) +{ + static const struct zd_ioreq16 ioreqs[] = { + { CR0, 0x0a }, { CR1, 0x06 }, { CR2, 0x26 }, + { CR3, 0x38 }, { CR4, 0x80 }, { CR9, 0xa0 }, + { CR10, 0x81 }, { CR11, 0x00 }, { CR12, 0x7f }, + { CR13, 0x8c }, { CR14, 0x80 }, { CR15, 0x3d }, + { CR16, 0x20 }, { CR17, 0x1e }, { CR18, 0x0a }, + { CR19, 0x48 }, { CR20, 0x0c }, { CR21, 0x0c }, + { CR22, 0x23 }, { CR23, 0x90 }, { CR24, 0x14 }, + { CR25, 0x40 }, { CR26, 0x10 }, { CR27, 0x19 }, + { CR28, 0x7f }, { CR29, 0x80 }, { CR30, 0x4b }, + { CR31, 0x60 }, { CR32, 0x43 }, { CR33, 0x08 }, + { CR34, 0x06 }, { CR35, 0x0a }, { CR36, 0x00 }, + { CR37, 0x00 }, { CR38, 0x38 }, { CR39, 0x0c }, + { CR40, 0x84 }, { CR41, 0x2a }, { CR42, 0x80 }, + { CR43, 0x10 }, { CR44, 0x12 }, { CR46, 0xff }, + { CR47, 0x1E }, { CR48, 0x26 }, { CR49, 0x5b }, + { CR64, 0xd0 }, { CR65, 0x04 }, { CR66, 0x58 }, + { CR67, 0xc9 }, { CR68, 0x88 }, { CR69, 0x41 }, + { CR70, 0x23 }, { CR71, 0x10 }, { CR72, 0xff }, + { CR73, 0x32 }, { CR74, 0x30 }, { CR75, 0x65 }, + { CR76, 0x41 }, { CR77, 0x1b }, { CR78, 0x30 }, + { CR79, 0x68 }, { CR80, 0x64 }, { CR81, 0x64 }, + { CR82, 0x00 }, { CR83, 0x00 }, { CR84, 0x00 }, + { CR85, 0x02 }, { CR86, 0x00 }, { CR87, 0x00 }, + { CR88, 0xff }, { CR89, 0xfc }, { CR90, 0x00 }, + { CR91, 0x00 }, { CR92, 0x00 }, { CR93, 0x08 }, + { CR94, 0x00 }, { CR95, 0x00 }, { CR96, 0xff }, + { CR97, 0xe7 }, { CR98, 0x00 }, { CR99, 0x00 }, + { CR100, 0x00 }, { CR101, 0xae }, { CR102, 0x02 }, + { CR103, 0x00 }, { CR104, 0x03 }, { CR105, 0x65 }, + { CR106, 0x04 }, { CR107, 0x00 }, { CR108, 0x0a }, + { CR109, 0xaa }, { CR110, 0xaa }, { CR111, 0x25 }, + { CR112, 0x25 }, { CR113, 0x00 }, { CR119, 0x1e }, + { CR125, 0x90 }, { CR126, 0x00 }, { CR127, 0x00 }, + { }, + { CR5, 0x00 }, { CR6, 0x00 }, { CR7, 0x00 }, + { CR8, 0x00 }, { CR9, 0x20 }, { CR12, 0xf0 }, + { CR20, 0x0e }, { CR21, 0x0e }, { CR27, 0x10 }, + { CR44, 0x33 }, { CR47, 0x1E }, { CR83, 0x24 }, + { CR84, 0x04 }, { CR85, 0x00 }, { CR86, 0x0C }, + { CR87, 0x12 }, { CR88, 0x0C }, { CR89, 0x00 }, + { CR90, 0x10 }, { CR91, 0x08 }, { CR93, 0x00 }, + { CR94, 0x01 }, { CR95, 0x00 }, { CR96, 0x50 }, + { CR97, 0x37 }, { CR98, 0x35 }, { CR101, 0x13 }, + { CR102, 0x27 }, { CR103, 0x27 }, { CR104, 0x18 }, + { CR105, 0x12 }, { CR109, 0x27 }, { CR110, 0x27 }, + { CR111, 0x27 }, { CR112, 0x27 }, { CR113, 0x27 }, + { CR114, 0x27 }, { CR115, 0x26 }, { CR116, 0x24 }, + { CR117, 0xfc }, { CR118, 0xfa }, { CR120, 0x4f }, + { CR123, 0x27 }, { CR125, 0xaa }, { CR127, 0x03 }, + { CR128, 0x14 }, { CR129, 0x12 }, { CR130, 0x10 }, + { CR131, 0x0C }, { CR136, 0xdf }, { CR137, 0x40 }, + { CR138, 0xa0 }, { CR139, 0xb0 }, { CR140, 0x99 }, + { CR141, 0x82 }, { CR142, 0x54 }, { CR143, 0x1c }, + { CR144, 0x6c }, { CR147, 0x07 }, { CR148, 0x4c }, + { CR149, 0x50 }, { CR150, 0x0e }, { CR151, 0x18 }, + { CR160, 0xfe }, { CR161, 0xee }, { CR162, 0xaa }, + { CR163, 0xfa }, { CR164, 0xfa }, { CR165, 0xea }, + { CR166, 0xbe }, { CR167, 0xbe }, { CR168, 0x6a }, + { CR169, 0xba }, { CR170, 0xba }, { CR171, 0xba }, + /* Note: CR204 must lead the CR203 */ + { CR204, 0x7d }, + { }, + { CR203, 0x30 }, + }; + + int r, t; + + dev_dbg_f(zd_chip_dev(chip), "\n"); + + r = zd_chip_lock_phy_regs(chip); + if (r) + goto out; + + r = zd_iowrite16a_locked(chip, ioreqs, ARRAY_SIZE(ioreqs)); + if (r) + goto unlock; + + r = patch_cr157(chip); +unlock: + t = zd_chip_unlock_phy_regs(chip); + if (t && !r) + r = t; +out: + return r; +} + +static int zd1211b_hw_reset_phy(struct zd_chip *chip) +{ + static const struct zd_ioreq16 ioreqs[] = { + { CR0, 0x14 }, { CR1, 0x06 }, { CR2, 0x26 }, + { CR3, 0x38 }, { CR4, 0x80 }, { CR9, 0xe0 }, + { CR10, 0x81 }, + /* power control { { CR11, 1 << 6 }, */ + { CR11, 0x00 }, + { CR12, 0xf0 }, { CR13, 0x8c }, { CR14, 0x80 }, + { CR15, 0x3d }, { CR16, 0x20 }, { CR17, 0x1e }, + { CR18, 0x0a }, { CR19, 0x48 }, + { CR20, 0x10 }, /* Org:0x0E, ComTrend:RalLink AP */ + { CR21, 0x0e }, { CR22, 0x23 }, { CR23, 0x90 }, + { CR24, 0x14 }, { CR25, 0x40 }, { CR26, 0x10 }, + { CR27, 0x10 }, { CR28, 0x7f }, { CR29, 0x80 }, + { CR30, 0x49 }, /* jointly decoder, no ASIC */ + { CR31, 0x60 }, { CR32, 0x43 }, { CR33, 0x08 }, + { CR34, 0x06 }, { CR35, 0x0a }, { CR36, 0x00 }, + { CR37, 0x00 }, { CR38, 0x38 }, { CR39, 0x0c }, + { CR40, 0x84 }, { CR41, 0x2a }, { CR42, 0x80 }, + { CR43, 0x10 }, { CR44, 0x33 }, { CR46, 0xff }, + { CR47, 0x1E }, { CR48, 0x26 }, { CR49, 0x5b }, + { CR64, 0xd0 }, { CR65, 0x04 }, { CR66, 0x58 }, + { CR67, 0xc9 }, { CR68, 0x88 }, { CR69, 0x41 }, + { CR70, 0x23 }, { CR71, 0x10 }, { CR72, 0xff }, + { CR73, 0x32 }, { CR74, 0x30 }, { CR75, 0x65 }, + { CR76, 0x41 }, { CR77, 0x1b }, { CR78, 0x30 }, + { CR79, 0xf0 }, { CR80, 0x64 }, { CR81, 0x64 }, + { CR82, 0x00 }, { CR83, 0x24 }, { CR84, 0x04 }, + { CR85, 0x00 }, { CR86, 0x0c }, { CR87, 0x12 }, + { CR88, 0x0c }, { CR89, 0x00 }, { CR90, 0x58 }, + { CR91, 0x04 }, { CR92, 0x00 }, { CR93, 0x00 }, + { CR94, 0x01 }, + { CR95, 0x20 }, /* ZD1211B */ + { CR96, 0x50 }, { CR97, 0x37 }, { CR98, 0x35 }, + { CR99, 0x00 }, { CR100, 0x01 }, { CR101, 0x13 }, + { CR102, 0x27 }, { CR103, 0x27 }, { CR104, 0x18 }, + { CR105, 0x12 }, { CR106, 0x04 }, { CR107, 0x00 }, + { CR108, 0x0a }, { CR109, 0x27 }, { CR110, 0x27 }, + { CR111, 0x27 }, { CR112, 0x27 }, { CR113, 0x27 }, + { CR114, 0x27 }, { CR115, 0x26 }, { CR116, 0x24 }, + { CR117, 0xfc }, { CR118, 0xfa }, { CR119, 0x1e }, + { CR125, 0x90 }, { CR126, 0x00 }, { CR127, 0x00 }, + { CR128, 0x14 }, { CR129, 0x12 }, { CR130, 0x10 }, + { CR131, 0x0c }, { CR136, 0xdf }, { CR137, 0xa0 }, + { CR138, 0xa8 }, { CR139, 0xb4 }, { CR140, 0x98 }, + { CR141, 0x82 }, { CR142, 0x53 }, { CR143, 0x1c }, + { CR144, 0x6c }, { CR147, 0x07 }, { CR148, 0x40 }, + { CR149, 0x40 }, /* Org:0x50 ComTrend:RalLink AP */ + { CR150, 0x14 }, /* Org:0x0E ComTrend:RalLink AP */ + { CR151, 0x18 }, { CR159, 0x70 }, { CR160, 0xfe }, + { CR161, 0xee }, { CR162, 0xaa }, { CR163, 0xfa }, + { CR164, 0xfa }, { CR165, 0xea }, { CR166, 0xbe }, + { CR167, 0xbe }, { CR168, 0x6a }, { CR169, 0xba }, + { CR170, 0xba }, { CR171, 0xba }, + /* Note: CR204 must lead the CR203 */ + { CR204, 0x7d }, + {}, + { CR203, 0x30 }, + }; + + int r, t; + + dev_dbg_f(zd_chip_dev(chip), "\n"); + + r = zd_chip_lock_phy_regs(chip); + if (r) + goto out; + + r = zd_iowrite16a_locked(chip, ioreqs, ARRAY_SIZE(ioreqs)); + if (r) + goto unlock; + + r = patch_cr157(chip); +unlock: + t = zd_chip_unlock_phy_regs(chip); + if (t && !r) + r = t; +out: + return r; +} + +static int hw_reset_phy(struct zd_chip *chip) +{ + return chip->is_zd1211b ? zd1211b_hw_reset_phy(chip) : + zd1211_hw_reset_phy(chip); +} + +static int zd1211_hw_init_hmac(struct zd_chip *chip) +{ + static const struct zd_ioreq32 ioreqs[] = { + { CR_ACK_TIMEOUT_EXT, 0x20 }, + { CR_ADDA_MBIAS_WARMTIME, 0x30000808 }, + { CR_ZD1211_RETRY_MAX, 0x2 }, + { CR_SNIFFER_ON, 0 }, + { CR_RX_FILTER, AP_RX_FILTER }, + { CR_GROUP_HASH_P1, 0x00 }, + { CR_GROUP_HASH_P2, 0x80000000 }, + { CR_REG1, 0xa4 }, + { CR_ADDA_PWR_DWN, 0x7f }, + { CR_BCN_PLCP_CFG, 0x00f00401 }, + { CR_PHY_DELAY, 0x00 }, + { CR_ACK_TIMEOUT_EXT, 0x80 }, + { CR_ADDA_PWR_DWN, 0x00 }, + { CR_ACK_TIME_80211, 0x100 }, + { CR_IFS_VALUE, 0x547c032 }, + { CR_RX_PE_DELAY, 0x70 }, + { CR_PS_CTRL, 0x10000000 }, + { CR_RTS_CTS_RATE, 0x02030203 }, + { CR_RX_THRESHOLD, 0x000c0640 }, + { CR_AFTER_PNP, 0x1 }, + { CR_WEP_PROTECT, 0x114 }, + }; + + int r; + + dev_dbg_f(zd_chip_dev(chip), "\n"); + ZD_ASSERT(mutex_is_locked(&chip->mutex)); + r = zd_iowrite32a_locked(chip, ioreqs, ARRAY_SIZE(ioreqs)); +#ifdef DEBUG + if (r) { + dev_err(zd_chip_dev(chip), + "error in zd_iowrite32a_locked. Error number %d\n", r); + } +#endif /* DEBUG */ + return r; +} + +static int zd1211b_hw_init_hmac(struct zd_chip *chip) +{ + static const struct zd_ioreq32 ioreqs[] = { + { CR_ACK_TIMEOUT_EXT, 0x20 }, + { CR_ADDA_MBIAS_WARMTIME, 0x30000808 }, + { CR_ZD1211B_RETRY_MAX, 0x02020202 }, + { CR_ZD1211B_TX_PWR_CTL4, 0x007f003f }, + { CR_ZD1211B_TX_PWR_CTL3, 0x007f003f }, + { CR_ZD1211B_TX_PWR_CTL2, 0x003f001f }, + { CR_ZD1211B_TX_PWR_CTL1, 0x001f000f }, + { CR_ZD1211B_AIFS_CTL1, 0x00280028 }, + { CR_ZD1211B_AIFS_CTL2, 0x008C003C }, + { CR_ZD1211B_TXOP, 0x01800824 }, + { CR_SNIFFER_ON, 0 }, + { CR_RX_FILTER, AP_RX_FILTER }, + { CR_GROUP_HASH_P1, 0x00 }, + { CR_GROUP_HASH_P2, 0x80000000 }, + { CR_REG1, 0xa4 }, + { CR_ADDA_PWR_DWN, 0x7f }, + { CR_BCN_PLCP_CFG, 0x00f00401 }, + { CR_PHY_DELAY, 0x00 }, + { CR_ACK_TIMEOUT_EXT, 0x80 }, + { CR_ADDA_PWR_DWN, 0x00 }, + { CR_ACK_TIME_80211, 0x100 }, + { CR_IFS_VALUE, 0x547c032 }, + { CR_RX_PE_DELAY, 0x70 }, + { CR_PS_CTRL, 0x10000000 }, + { CR_RTS_CTS_RATE, 0x02030203 }, + { CR_RX_THRESHOLD, 0x000c0640 }, + { CR_AFTER_PNP, 0x1 }, + { CR_WEP_PROTECT, 0x114 }, + }; + + int r; + + dev_dbg_f(zd_chip_dev(chip), "\n"); + ZD_ASSERT(mutex_is_locked(&chip->mutex)); + r = zd_iowrite32a_locked(chip, ioreqs, ARRAY_SIZE(ioreqs)); + if (r) { + dev_dbg_f(zd_chip_dev(chip), + "error in zd_iowrite32a_locked. Error number %d\n", r); + } + return r; +} + +static int hw_init_hmac(struct zd_chip *chip) +{ + return chip->is_zd1211b ? + zd1211b_hw_init_hmac(chip) : zd1211_hw_init_hmac(chip); +} + +struct aw_pt_bi { + u32 atim_wnd_period; + u32 pre_tbtt; + u32 beacon_interval; +}; + +static int get_aw_pt_bi(struct zd_chip *chip, struct aw_pt_bi *s) +{ + int r; + static const zd_addr_t aw_pt_bi_addr[] = + { CR_ATIM_WND_PERIOD, CR_PRE_TBTT, CR_BCN_INTERVAL }; + u32 values[3]; + + r = zd_ioread32v_locked(chip, values, (const zd_addr_t *)aw_pt_bi_addr, + ARRAY_SIZE(aw_pt_bi_addr)); + if (r) { + memset(s, 0, sizeof(*s)); + return r; + } + + s->atim_wnd_period = values[0]; + s->pre_tbtt = values[1]; + s->beacon_interval = values[2]; + dev_dbg_f(zd_chip_dev(chip), "aw %u pt %u bi %u\n", + s->atim_wnd_period, s->pre_tbtt, s->beacon_interval); + return 0; +} + +static int set_aw_pt_bi(struct zd_chip *chip, struct aw_pt_bi *s) +{ + struct zd_ioreq32 reqs[3]; + + if (s->beacon_interval <= 5) + s->beacon_interval = 5; + if (s->pre_tbtt < 4 || s->pre_tbtt >= s->beacon_interval) + s->pre_tbtt = s->beacon_interval - 1; + if (s->atim_wnd_period >= s->pre_tbtt) + s->atim_wnd_period = s->pre_tbtt - 1; + + reqs[0].addr = CR_ATIM_WND_PERIOD; + reqs[0].value = s->atim_wnd_period; + reqs[1].addr = CR_PRE_TBTT; + reqs[1].value = s->pre_tbtt; + reqs[2].addr = CR_BCN_INTERVAL; + reqs[2].value = s->beacon_interval; + + dev_dbg_f(zd_chip_dev(chip), + "aw %u pt %u bi %u\n", s->atim_wnd_period, s->pre_tbtt, + s->beacon_interval); + return zd_iowrite32a_locked(chip, reqs, ARRAY_SIZE(reqs)); +} + + +static int set_beacon_interval(struct zd_chip *chip, u32 interval) +{ + int r; + struct aw_pt_bi s; + + ZD_ASSERT(mutex_is_locked(&chip->mutex)); + r = get_aw_pt_bi(chip, &s); + if (r) + return r; + s.beacon_interval = interval; + return set_aw_pt_bi(chip, &s); +} + +int zd_set_beacon_interval(struct zd_chip *chip, u32 interval) +{ + int r; + + mutex_lock(&chip->mutex); + r = set_beacon_interval(chip, interval); + mutex_unlock(&chip->mutex); + return r; +} + +static int hw_init(struct zd_chip *chip) +{ + int r; + + dev_dbg_f(zd_chip_dev(chip), "\n"); + ZD_ASSERT(mutex_is_locked(&chip->mutex)); + r = hw_reset_phy(chip); + if (r) + return r; + + r = hw_init_hmac(chip); + if (r) + return r; + r = set_beacon_interval(chip, 100); + if (r) + return r; + return 0; +} + +#ifdef DEBUG +static int dump_cr(struct zd_chip *chip, const zd_addr_t addr, + const char *addr_string) +{ + int r; + u32 value; + + r = zd_ioread32_locked(chip, &value, addr); + if (r) { + dev_dbg_f(zd_chip_dev(chip), + "error reading %s. Error number %d\n", addr_string, r); + return r; + } + + dev_dbg_f(zd_chip_dev(chip), "%s %#010x\n", + addr_string, (unsigned int)value); + return 0; +} + +static int test_init(struct zd_chip *chip) +{ + int r; + + r = dump_cr(chip, CR_AFTER_PNP, "CR_AFTER_PNP"); + if (r) + return r; + r = dump_cr(chip, CR_GPI_EN, "CR_GPI_EN"); + if (r) + return r; + return dump_cr(chip, CR_INTERRUPT, "CR_INTERRUPT"); +} + +static void dump_fw_registers(struct zd_chip *chip) +{ + static const zd_addr_t addr[4] = { + FW_FIRMWARE_VER, FW_USB_SPEED, FW_FIX_TX_RATE, + FW_LINK_STATUS + }; + + int r; + u16 values[4]; + + r = zd_ioread16v_locked(chip, values, (const zd_addr_t*)addr, + ARRAY_SIZE(addr)); + if (r) { + dev_dbg_f(zd_chip_dev(chip), "error %d zd_ioread16v_locked\n", + r); + return; + } + + dev_dbg_f(zd_chip_dev(chip), "FW_FIRMWARE_VER %#06hx\n", values[0]); + dev_dbg_f(zd_chip_dev(chip), "FW_USB_SPEED %#06hx\n", values[1]); + dev_dbg_f(zd_chip_dev(chip), "FW_FIX_TX_RATE %#06hx\n", values[2]); + dev_dbg_f(zd_chip_dev(chip), "FW_LINK_STATUS %#06hx\n", values[3]); +} +#endif /* DEBUG */ + +static int print_fw_version(struct zd_chip *chip) +{ + int r; + u16 version; + + r = zd_ioread16_locked(chip, &version, FW_FIRMWARE_VER); + if (r) + return r; + + dev_info(zd_chip_dev(chip),"firmware version %04hx\n", version); + return 0; +} + +static int set_mandatory_rates(struct zd_chip *chip, enum ieee80211_std std) +{ + u32 rates; + ZD_ASSERT(mutex_is_locked(&chip->mutex)); + /* This sets the mandatory rates, which only depend from the standard + * that the device is supporting. Until further notice we should try + * to support 802.11g also for full speed USB. + */ + switch (std) { + case IEEE80211B: + rates = CR_RATE_1M|CR_RATE_2M|CR_RATE_5_5M|CR_RATE_11M; + break; + case IEEE80211G: + rates = CR_RATE_1M|CR_RATE_2M|CR_RATE_5_5M|CR_RATE_11M| + CR_RATE_6M|CR_RATE_12M|CR_RATE_24M; + break; + default: + return -EINVAL; + } + return zd_iowrite32_locked(chip, rates, CR_MANDATORY_RATE_TBL); +} + +int zd_chip_enable_hwint(struct zd_chip *chip) +{ + int r; + + mutex_lock(&chip->mutex); + r = zd_iowrite32_locked(chip, HWINT_ENABLED, CR_INTERRUPT); + mutex_unlock(&chip->mutex); + return r; +} + +static int disable_hwint(struct zd_chip *chip) +{ + return zd_iowrite32_locked(chip, HWINT_DISABLED, CR_INTERRUPT); +} + +int zd_chip_disable_hwint(struct zd_chip *chip) +{ + int r; + + mutex_lock(&chip->mutex); + r = disable_hwint(chip); + mutex_unlock(&chip->mutex); + return r; +} + +int zd_chip_init_hw(struct zd_chip *chip, u8 device_type) +{ + int r; + u8 rf_type; + + dev_dbg_f(zd_chip_dev(chip), "\n"); + + mutex_lock(&chip->mutex); + chip->is_zd1211b = (device_type == DEVICE_ZD1211B) != 0; + +#ifdef DEBUG + r = test_init(chip); + if (r) + goto out; +#endif + r = zd_iowrite32_locked(chip, 1, CR_AFTER_PNP); + if (r) + goto out; + + r = zd_usb_init_hw(&chip->usb); + if (r) + goto out; + + /* GPI is always disabled, also in the other driver. + */ + r = zd_iowrite32_locked(chip, 0, CR_GPI_EN); + if (r) + goto out; + r = zd_iowrite32_locked(chip, CWIN_SIZE, CR_CWMIN_CWMAX); + if (r) + goto out; + /* Currently we support IEEE 802.11g for full and high speed USB. + * It might be discussed, whether we should suppport pure b mode for + * full speed USB. + */ + r = set_mandatory_rates(chip, IEEE80211G); + if (r) + goto out; + /* Disabling interrupts is certainly a smart thing here. + */ + r = disable_hwint(chip); + if (r) + goto out; + r = read_pod(chip, &rf_type); + if (r) + goto out; + r = hw_init(chip); + if (r) + goto out; + r = zd_rf_init_hw(&chip->rf, rf_type); + if (r) + goto out; + + r = print_fw_version(chip); + if (r) + goto out; + +#ifdef DEBUG + dump_fw_registers(chip); + r = test_init(chip); + if (r) + goto out; +#endif /* DEBUG */ + + r = read_e2p_mac_addr(chip); + if (r) + goto out; + + r = read_cal_int_tables(chip); + if (r) + goto out; + + print_id(chip); +out: + mutex_unlock(&chip->mutex); + return r; +} + +static int update_pwr_int(struct zd_chip *chip, u8 channel) +{ + u8 value = chip->pwr_int_values[channel - 1]; + dev_dbg_f(zd_chip_dev(chip), "channel %d pwr_int %#04x\n", + channel, value); + return zd_iowrite32_locked(chip, value, CR31); +} + +static int update_pwr_cal(struct zd_chip *chip, u8 channel) +{ + u8 value = chip->pwr_cal_values[channel-1]; + dev_dbg_f(zd_chip_dev(chip), "channel %d pwr_cal %#04x\n", + channel, value); + return zd_iowrite32_locked(chip, value, CR68); +} + +static int update_ofdm_cal(struct zd_chip *chip, u8 channel) +{ + struct zd_ioreq32 ioreqs[3]; + + ioreqs[0].addr = CR67; + ioreqs[0].value = chip->ofdm_cal_values[OFDM_36M_INDEX][channel-1]; + ioreqs[1].addr = CR66; + ioreqs[1].value = chip->ofdm_cal_values[OFDM_48M_INDEX][channel-1]; + ioreqs[2].addr = CR65; + ioreqs[2].value = chip->ofdm_cal_values[OFDM_54M_INDEX][channel-1]; + + dev_dbg_f(zd_chip_dev(chip), + "channel %d ofdm_cal 36M %#04x 48M %#04x 54M %#04x\n", + channel, ioreqs[0].value, ioreqs[1].value, ioreqs[2].value); + return zd_iowrite32a_locked(chip, ioreqs, ARRAY_SIZE(ioreqs)); +} + +static int update_channel_integration_and_calibration(struct zd_chip *chip, + u8 channel) +{ + int r; + + r = update_pwr_int(chip, channel); + if (r) + return r; + if (chip->is_zd1211b) { + static const struct zd_ioreq32 ioreqs[] = { + { CR69, 0x28 }, + {}, + { CR69, 0x2a }, + }; + + r = update_ofdm_cal(chip, channel); + if (r) + return r; + r = update_pwr_cal(chip, channel); + if (r) + return r; + r = zd_iowrite32a_locked(chip, ioreqs, ARRAY_SIZE(ioreqs)); + if (r) + return r; + } + + return 0; +} + +/* The CCK baseband gain can be optionally patched by the EEPROM */ +static int patch_cck_gain(struct zd_chip *chip) +{ + int r; + u32 value; + + if (!chip->patch_cck_gain) + return 0; + + ZD_ASSERT(mutex_is_locked(&chip->mutex)); + r = zd_ioread32_locked(chip, &value, E2P_PHY_REG); + if (r) + return r; + dev_dbg_f(zd_chip_dev(chip), "patching value %x\n", value & 0xff); + return zd_iowrite32_locked(chip, value & 0xff, CR47); +} + +int zd_chip_set_channel(struct zd_chip *chip, u8 channel) +{ + int r, t; + + mutex_lock(&chip->mutex); + r = zd_chip_lock_phy_regs(chip); + if (r) + goto out; + r = zd_rf_set_channel(&chip->rf, channel); + if (r) + goto unlock; + r = update_channel_integration_and_calibration(chip, channel); + if (r) + goto unlock; + r = patch_cck_gain(chip); + if (r) + goto unlock; + r = patch_6m_band_edge(chip, channel); + if (r) + goto unlock; + r = zd_iowrite32_locked(chip, 0, CR_CONFIG_PHILIPS); +unlock: + t = zd_chip_unlock_phy_regs(chip); + if (t && !r) + r = t; +out: + mutex_unlock(&chip->mutex); + return r; +} + +u8 zd_chip_get_channel(struct zd_chip *chip) +{ + u8 channel; + + mutex_lock(&chip->mutex); + channel = chip->rf.channel; + mutex_unlock(&chip->mutex); + return channel; +} + +static u16 led_mask(int led) +{ + switch (led) { + case 1: + return LED1; + case 2: + return LED2; + default: + return 0; + } +} + +static int read_led_reg(struct zd_chip *chip, u16 *status) +{ + ZD_ASSERT(mutex_is_locked(&chip->mutex)); + return zd_ioread16_locked(chip, status, CR_LED); +} + +static int write_led_reg(struct zd_chip *chip, u16 status) +{ + ZD_ASSERT(mutex_is_locked(&chip->mutex)); + return zd_iowrite16_locked(chip, status, CR_LED); +} + +int zd_chip_led_status(struct zd_chip *chip, int led, enum led_status status) +{ + int r, ret; + u16 mask = led_mask(led); + u16 reg; + + if (!mask) + return -EINVAL; + mutex_lock(&chip->mutex); + r = read_led_reg(chip, ®); + if (r) + return r; + switch (status) { + case LED_STATUS: + return (reg & mask) ? LED_ON : LED_OFF; + case LED_OFF: + reg &= ~mask; + ret = LED_OFF; + break; + case LED_FLIP: + reg ^= mask; + ret = (reg&mask) ? LED_ON : LED_OFF; + break; + case LED_ON: + reg |= mask; + ret = LED_ON; + break; + default: + return -EINVAL; + } + r = write_led_reg(chip, reg); + if (r) { + ret = r; + goto out; + } +out: + mutex_unlock(&chip->mutex); + return r; +} + +int zd_chip_led_flip(struct zd_chip *chip, int led, + const unsigned int *phases_msecs, unsigned int count) +{ + int i, r; + enum led_status status; + + r = zd_chip_led_status(chip, led, LED_STATUS); + if (r) + return r; + status = r; + for (i = 0; i < count; i++) { + r = zd_chip_led_status(chip, led, LED_FLIP); + if (r < 0) + goto out; + msleep(phases_msecs[i]); + } + +out: + zd_chip_led_status(chip, led, status); + return r; +} + +int zd_chip_set_basic_rates(struct zd_chip *chip, u16 cr_rates) +{ + int r; + + if (cr_rates & ~(CR_RATES_80211B|CR_RATES_80211G)) + return -EINVAL; + + mutex_lock(&chip->mutex); + r = zd_iowrite32_locked(chip, cr_rates, CR_BASIC_RATE_TBL); + mutex_unlock(&chip->mutex); + return r; +} + +static int ofdm_qual_db(u8 status_quality, u8 rate, unsigned int size) +{ + static const u16 constants[] = { + 715, 655, 585, 540, 470, 410, 360, 315, + 270, 235, 205, 175, 150, 125, 105, 85, + 65, 50, 40, 25, 15 + }; + + int i; + u32 x; + + /* It seems that their quality parameter is somehow per signal + * and is now transferred per bit. + */ + switch (rate) { + case ZD_OFDM_RATE_6M: + case ZD_OFDM_RATE_12M: + case ZD_OFDM_RATE_24M: + size *= 2; + break; + case ZD_OFDM_RATE_9M: + case ZD_OFDM_RATE_18M: + case ZD_OFDM_RATE_36M: + case ZD_OFDM_RATE_54M: + size *= 4; + size /= 3; + break; + case ZD_OFDM_RATE_48M: + size *= 3; + size /= 2; + break; + default: + return -EINVAL; + } + + x = (10000 * status_quality)/size; + for (i = 0; i < ARRAY_SIZE(constants); i++) { + if (x > constants[i]) + break; + } + + return i; +} + +static unsigned int log10times100(unsigned int x) +{ + static const u8 log10[] = { + 0, + 0, 30, 47, 60, 69, 77, 84, 90, 95, 100, + 104, 107, 111, 114, 117, 120, 123, 125, 127, 130, + 132, 134, 136, 138, 139, 141, 143, 144, 146, 147, + 149, 150, 151, 153, 154, 155, 156, 157, 159, 160, + 161, 162, 163, 164, 165, 166, 167, 168, 169, 169, + 170, 171, 172, 173, 174, 174, 175, 176, 177, 177, + 178, 179, 179, 180, 181, 181, 182, 183, 183, 184, + 185, 185, 186, 186, 187, 188, 188, 189, 189, 190, + 190, 191, 191, 192, 192, 193, 193, 194, 194, 195, + 195, 196, 196, 197, 197, 198, 198, 199, 199, 200, + 200, 200, 201, 201, 202, 202, 202, 203, 203, 204, + 204, 204, 205, 205, 206, 206, 206, 207, 207, 207, + 208, 208, 208, 209, 209, 210, 210, 210, 211, 211, + 211, 212, 212, 212, 213, 213, 213, 213, 214, 214, + 214, 215, 215, 215, 216, 216, 216, 217, 217, 217, + 217, 218, 218, 218, 219, 219, 219, 219, 220, 220, + 220, 220, 221, 221, 221, 222, 222, 222, 222, 223, + 223, 223, 223, 224, 224, 224, 224, + }; + + return x < ARRAY_SIZE(log10) ? log10[x] : 225; +} + +enum { + MAX_CCK_EVM_DB = 45, +}; + +static int cck_evm_db(u8 status_quality) +{ + return (20 * log10times100(status_quality)) / 100; +} + +static int cck_snr_db(u8 status_quality) +{ + int r = MAX_CCK_EVM_DB - cck_evm_db(status_quality); + ZD_ASSERT(r >= 0); + return r; +} + +static int rx_qual_db(const void *rx_frame, unsigned int size, + const struct rx_status *status) +{ + return (status->frame_status&ZD_RX_OFDM) ? + ofdm_qual_db(status->signal_quality_ofdm, + zd_ofdm_plcp_header_rate(rx_frame), + size) : + cck_snr_db(status->signal_quality_cck); +} + +u8 zd_rx_qual_percent(const void *rx_frame, unsigned int size, + const struct rx_status *status) +{ + int r = rx_qual_db(rx_frame, size, status); + if (r < 0) + r = 0; + r = (r * 100) / 14; + if (r > 100) + r = 100; + return r; +} + +u8 zd_rx_strength_percent(u8 rssi) +{ + int r = (rssi*100) / 30; + if (r > 100) + r = 100; + return (u8) r; +} + +u16 zd_rx_rate(const void *rx_frame, const struct rx_status *status) +{ + static const u16 ofdm_rates[] = { + [ZD_OFDM_RATE_6M] = 60, + [ZD_OFDM_RATE_9M] = 90, + [ZD_OFDM_RATE_12M] = 120, + [ZD_OFDM_RATE_18M] = 180, + [ZD_OFDM_RATE_24M] = 240, + [ZD_OFDM_RATE_36M] = 360, + [ZD_OFDM_RATE_48M] = 480, + [ZD_OFDM_RATE_54M] = 540, + }; + u16 rate; + if (status->frame_status & ZD_RX_OFDM) { + u8 ofdm_rate = zd_ofdm_plcp_header_rate(rx_frame); + rate = ofdm_rates[ofdm_rate & 0xf]; + } else { + u8 cck_rate = zd_cck_plcp_header_rate(rx_frame); + switch (cck_rate) { + case ZD_CCK_SIGNAL_1M: + rate = 10; + break; + case ZD_CCK_SIGNAL_2M: + rate = 20; + break; + case ZD_CCK_SIGNAL_5M5: + rate = 55; + break; + case ZD_CCK_SIGNAL_11M: + rate = 110; + break; + default: + rate = 0; + } + } + + return rate; +} + +int zd_chip_switch_radio_on(struct zd_chip *chip) +{ + int r; + + mutex_lock(&chip->mutex); + r = zd_switch_radio_on(&chip->rf); + mutex_unlock(&chip->mutex); + return r; +} + +int zd_chip_switch_radio_off(struct zd_chip *chip) +{ + int r; + + mutex_lock(&chip->mutex); + r = zd_switch_radio_off(&chip->rf); + mutex_unlock(&chip->mutex); + return r; +} + +int zd_chip_enable_int(struct zd_chip *chip) +{ + int r; + + mutex_lock(&chip->mutex); + r = zd_usb_enable_int(&chip->usb); + mutex_unlock(&chip->mutex); + return r; +} + +void zd_chip_disable_int(struct zd_chip *chip) +{ + mutex_lock(&chip->mutex); + zd_usb_disable_int(&chip->usb); + mutex_unlock(&chip->mutex); +} + +int zd_chip_enable_rx(struct zd_chip *chip) +{ + int r; + + mutex_lock(&chip->mutex); + r = zd_usb_enable_rx(&chip->usb); + mutex_unlock(&chip->mutex); + return r; +} + +void zd_chip_disable_rx(struct zd_chip *chip) +{ + mutex_lock(&chip->mutex); + zd_usb_disable_rx(&chip->usb); + mutex_unlock(&chip->mutex); +} + +int zd_rfwritev_locked(struct zd_chip *chip, + const u32* values, unsigned int count, u8 bits) +{ + int r; + unsigned int i; + + for (i = 0; i < count; i++) { + r = zd_rfwrite_locked(chip, values[i], bits); + if (r) + return r; + } + + return 0; +} diff --git a/drivers/net/wireless/zd1211rw/zd_chip.h b/drivers/net/wireless/zd1211rw/zd_chip.h new file mode 100644 index 00000000000..805121093ab --- /dev/null +++ b/drivers/net/wireless/zd1211rw/zd_chip.h @@ -0,0 +1,825 @@ +/* zd_chip.h + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#ifndef _ZD_CHIP_H +#define _ZD_CHIP_H + +#include "zd_types.h" +#include "zd_rf.h" +#include "zd_usb.h" + +/* Header for the Media Access Controller (MAC) and the Baseband Processor + * (BBP). It appears that the ZD1211 wraps the old ZD1205 with USB glue and + * adds a processor for handling the USB protocol. + */ + +/* 8-bit hardware registers */ +#define CR0 CTL_REG(0x0000) +#define CR1 CTL_REG(0x0004) +#define CR2 CTL_REG(0x0008) +#define CR3 CTL_REG(0x000C) + +#define CR5 CTL_REG(0x0010) +/* bit 5: if set short preamble used + * bit 6: filter band - Japan channel 14 on, else off + */ +#define CR6 CTL_REG(0x0014) +#define CR7 CTL_REG(0x0018) +#define CR8 CTL_REG(0x001C) + +#define CR4 CTL_REG(0x0020) + +#define CR9 CTL_REG(0x0024) +/* bit 2: antenna switch (together with CR10) */ +#define CR10 CTL_REG(0x0028) +/* bit 1: antenna switch (together with CR9) + * RF2959 controls with CR11 radion on and off + */ +#define CR11 CTL_REG(0x002C) +/* bit 6: TX power control for OFDM + * RF2959 controls with CR10 radio on and off + */ +#define CR12 CTL_REG(0x0030) +#define CR13 CTL_REG(0x0034) +#define CR14 CTL_REG(0x0038) +#define CR15 CTL_REG(0x003C) +#define CR16 CTL_REG(0x0040) +#define CR17 CTL_REG(0x0044) +#define CR18 CTL_REG(0x0048) +#define CR19 CTL_REG(0x004C) +#define CR20 CTL_REG(0x0050) +#define CR21 CTL_REG(0x0054) +#define CR22 CTL_REG(0x0058) +#define CR23 CTL_REG(0x005C) +#define CR24 CTL_REG(0x0060) /* CCA threshold */ +#define CR25 CTL_REG(0x0064) +#define CR26 CTL_REG(0x0068) +#define CR27 CTL_REG(0x006C) +#define CR28 CTL_REG(0x0070) +#define CR29 CTL_REG(0x0074) +#define CR30 CTL_REG(0x0078) +#define CR31 CTL_REG(0x007C) /* TX power control for RF in CCK mode */ +#define CR32 CTL_REG(0x0080) +#define CR33 CTL_REG(0x0084) +#define CR34 CTL_REG(0x0088) +#define CR35 CTL_REG(0x008C) +#define CR36 CTL_REG(0x0090) +#define CR37 CTL_REG(0x0094) +#define CR38 CTL_REG(0x0098) +#define CR39 CTL_REG(0x009C) +#define CR40 CTL_REG(0x00A0) +#define CR41 CTL_REG(0x00A4) +#define CR42 CTL_REG(0x00A8) +#define CR43 CTL_REG(0x00AC) +#define CR44 CTL_REG(0x00B0) +#define CR45 CTL_REG(0x00B4) +#define CR46 CTL_REG(0x00B8) +#define CR47 CTL_REG(0x00BC) /* CCK baseband gain + * (patch value might be in EEPROM) + */ +#define CR48 CTL_REG(0x00C0) +#define CR49 CTL_REG(0x00C4) +#define CR50 CTL_REG(0x00C8) +#define CR51 CTL_REG(0x00CC) /* TX power control for RF in 6-36M modes */ +#define CR52 CTL_REG(0x00D0) /* TX power control for RF in 48M mode */ +#define CR53 CTL_REG(0x00D4) /* TX power control for RF in 54M mode */ +#define CR54 CTL_REG(0x00D8) +#define CR55 CTL_REG(0x00DC) +#define CR56 CTL_REG(0x00E0) +#define CR57 CTL_REG(0x00E4) +#define CR58 CTL_REG(0x00E8) +#define CR59 CTL_REG(0x00EC) +#define CR60 CTL_REG(0x00F0) +#define CR61 CTL_REG(0x00F4) +#define CR62 CTL_REG(0x00F8) +#define CR63 CTL_REG(0x00FC) +#define CR64 CTL_REG(0x0100) +#define CR65 CTL_REG(0x0104) /* OFDM 54M calibration */ +#define CR66 CTL_REG(0x0108) /* OFDM 48M calibration */ +#define CR67 CTL_REG(0x010C) /* OFDM 36M calibration */ +#define CR68 CTL_REG(0x0110) /* CCK calibration */ +#define CR69 CTL_REG(0x0114) +#define CR70 CTL_REG(0x0118) +#define CR71 CTL_REG(0x011C) +#define CR72 CTL_REG(0x0120) +#define CR73 CTL_REG(0x0124) +#define CR74 CTL_REG(0x0128) +#define CR75 CTL_REG(0x012C) +#define CR76 CTL_REG(0x0130) +#define CR77 CTL_REG(0x0134) +#define CR78 CTL_REG(0x0138) +#define CR79 CTL_REG(0x013C) +#define CR80 CTL_REG(0x0140) +#define CR81 CTL_REG(0x0144) +#define CR82 CTL_REG(0x0148) +#define CR83 CTL_REG(0x014C) +#define CR84 CTL_REG(0x0150) +#define CR85 CTL_REG(0x0154) +#define CR86 CTL_REG(0x0158) +#define CR87 CTL_REG(0x015C) +#define CR88 CTL_REG(0x0160) +#define CR89 CTL_REG(0x0164) +#define CR90 CTL_REG(0x0168) +#define CR91 CTL_REG(0x016C) +#define CR92 CTL_REG(0x0170) +#define CR93 CTL_REG(0x0174) +#define CR94 CTL_REG(0x0178) +#define CR95 CTL_REG(0x017C) +#define CR96 CTL_REG(0x0180) +#define CR97 CTL_REG(0x0184) +#define CR98 CTL_REG(0x0188) +#define CR99 CTL_REG(0x018C) +#define CR100 CTL_REG(0x0190) +#define CR101 CTL_REG(0x0194) +#define CR102 CTL_REG(0x0198) +#define CR103 CTL_REG(0x019C) +#define CR104 CTL_REG(0x01A0) +#define CR105 CTL_REG(0x01A4) +#define CR106 CTL_REG(0x01A8) +#define CR107 CTL_REG(0x01AC) +#define CR108 CTL_REG(0x01B0) +#define CR109 CTL_REG(0x01B4) +#define CR110 CTL_REG(0x01B8) +#define CR111 CTL_REG(0x01BC) +#define CR112 CTL_REG(0x01C0) +#define CR113 CTL_REG(0x01C4) +#define CR114 CTL_REG(0x01C8) +#define CR115 CTL_REG(0x01CC) +#define CR116 CTL_REG(0x01D0) +#define CR117 CTL_REG(0x01D4) +#define CR118 CTL_REG(0x01D8) +#define CR119 CTL_REG(0x01DC) +#define CR120 CTL_REG(0x01E0) +#define CR121 CTL_REG(0x01E4) +#define CR122 CTL_REG(0x01E8) +#define CR123 CTL_REG(0x01EC) +#define CR124 CTL_REG(0x01F0) +#define CR125 CTL_REG(0x01F4) +#define CR126 CTL_REG(0x01F8) +#define CR127 CTL_REG(0x01FC) +#define CR128 CTL_REG(0x0200) +#define CR129 CTL_REG(0x0204) +#define CR130 CTL_REG(0x0208) +#define CR131 CTL_REG(0x020C) +#define CR132 CTL_REG(0x0210) +#define CR133 CTL_REG(0x0214) +#define CR134 CTL_REG(0x0218) +#define CR135 CTL_REG(0x021C) +#define CR136 CTL_REG(0x0220) +#define CR137 CTL_REG(0x0224) +#define CR138 CTL_REG(0x0228) +#define CR139 CTL_REG(0x022C) +#define CR140 CTL_REG(0x0230) +#define CR141 CTL_REG(0x0234) +#define CR142 CTL_REG(0x0238) +#define CR143 CTL_REG(0x023C) +#define CR144 CTL_REG(0x0240) +#define CR145 CTL_REG(0x0244) +#define CR146 CTL_REG(0x0248) +#define CR147 CTL_REG(0x024C) +#define CR148 CTL_REG(0x0250) +#define CR149 CTL_REG(0x0254) +#define CR150 CTL_REG(0x0258) +#define CR151 CTL_REG(0x025C) +#define CR152 CTL_REG(0x0260) +#define CR153 CTL_REG(0x0264) +#define CR154 CTL_REG(0x0268) +#define CR155 CTL_REG(0x026C) +#define CR156 CTL_REG(0x0270) +#define CR157 CTL_REG(0x0274) +#define CR158 CTL_REG(0x0278) +#define CR159 CTL_REG(0x027C) +#define CR160 CTL_REG(0x0280) +#define CR161 CTL_REG(0x0284) +#define CR162 CTL_REG(0x0288) +#define CR163 CTL_REG(0x028C) +#define CR164 CTL_REG(0x0290) +#define CR165 CTL_REG(0x0294) +#define CR166 CTL_REG(0x0298) +#define CR167 CTL_REG(0x029C) +#define CR168 CTL_REG(0x02A0) +#define CR169 CTL_REG(0x02A4) +#define CR170 CTL_REG(0x02A8) +#define CR171 CTL_REG(0x02AC) +#define CR172 CTL_REG(0x02B0) +#define CR173 CTL_REG(0x02B4) +#define CR174 CTL_REG(0x02B8) +#define CR175 CTL_REG(0x02BC) +#define CR176 CTL_REG(0x02C0) +#define CR177 CTL_REG(0x02C4) +#define CR178 CTL_REG(0x02C8) +#define CR179 CTL_REG(0x02CC) +#define CR180 CTL_REG(0x02D0) +#define CR181 CTL_REG(0x02D4) +#define CR182 CTL_REG(0x02D8) +#define CR183 CTL_REG(0x02DC) +#define CR184 CTL_REG(0x02E0) +#define CR185 CTL_REG(0x02E4) +#define CR186 CTL_REG(0x02E8) +#define CR187 CTL_REG(0x02EC) +#define CR188 CTL_REG(0x02F0) +#define CR189 CTL_REG(0x02F4) +#define CR190 CTL_REG(0x02F8) +#define CR191 CTL_REG(0x02FC) +#define CR192 CTL_REG(0x0300) +#define CR193 CTL_REG(0x0304) +#define CR194 CTL_REG(0x0308) +#define CR195 CTL_REG(0x030C) +#define CR196 CTL_REG(0x0310) +#define CR197 CTL_REG(0x0314) +#define CR198 CTL_REG(0x0318) +#define CR199 CTL_REG(0x031C) +#define CR200 CTL_REG(0x0320) +#define CR201 CTL_REG(0x0324) +#define CR202 CTL_REG(0x0328) +#define CR203 CTL_REG(0x032C) /* I2C bus template value & flash control */ +#define CR204 CTL_REG(0x0330) +#define CR205 CTL_REG(0x0334) +#define CR206 CTL_REG(0x0338) +#define CR207 CTL_REG(0x033C) +#define CR208 CTL_REG(0x0340) +#define CR209 CTL_REG(0x0344) +#define CR210 CTL_REG(0x0348) +#define CR211 CTL_REG(0x034C) +#define CR212 CTL_REG(0x0350) +#define CR213 CTL_REG(0x0354) +#define CR214 CTL_REG(0x0358) +#define CR215 CTL_REG(0x035C) +#define CR216 CTL_REG(0x0360) +#define CR217 CTL_REG(0x0364) +#define CR218 CTL_REG(0x0368) +#define CR219 CTL_REG(0x036C) +#define CR220 CTL_REG(0x0370) +#define CR221 CTL_REG(0x0374) +#define CR222 CTL_REG(0x0378) +#define CR223 CTL_REG(0x037C) +#define CR224 CTL_REG(0x0380) +#define CR225 CTL_REG(0x0384) +#define CR226 CTL_REG(0x0388) +#define CR227 CTL_REG(0x038C) +#define CR228 CTL_REG(0x0390) +#define CR229 CTL_REG(0x0394) +#define CR230 CTL_REG(0x0398) +#define CR231 CTL_REG(0x039C) +#define CR232 CTL_REG(0x03A0) +#define CR233 CTL_REG(0x03A4) +#define CR234 CTL_REG(0x03A8) +#define CR235 CTL_REG(0x03AC) +#define CR236 CTL_REG(0x03B0) + +#define CR240 CTL_REG(0x03C0) +/* bit 7: host-controlled RF register writes + * CR241-CR245: for hardware controlled writing of RF bits, not needed for + * USB + */ +#define CR241 CTL_REG(0x03C4) +#define CR242 CTL_REG(0x03C8) +#define CR243 CTL_REG(0x03CC) +#define CR244 CTL_REG(0x03D0) +#define CR245 CTL_REG(0x03D4) + +#define CR251 CTL_REG(0x03EC) /* only used for activation and deactivation of + * Airoha RFs AL2230 and AL7230B + */ +#define CR252 CTL_REG(0x03F0) +#define CR253 CTL_REG(0x03F4) +#define CR254 CTL_REG(0x03F8) +#define CR255 CTL_REG(0x03FC) + +#define CR_MAX_PHY_REG 255 + +/* Taken from the ZYDAS driver, not all of them are relevant for the ZSD1211 + * driver. + */ + +#define CR_RF_IF_CLK CTL_REG(0x0400) +#define CR_RF_IF_DATA CTL_REG(0x0404) +#define CR_PE1_PE2 CTL_REG(0x0408) +#define CR_PE2_DLY CTL_REG(0x040C) +#define CR_LE1 CTL_REG(0x0410) +#define CR_LE2 CTL_REG(0x0414) +/* Seems to enable/disable GPI (General Purpose IO?) */ +#define CR_GPI_EN CTL_REG(0x0418) +#define CR_RADIO_PD CTL_REG(0x042C) +#define CR_RF2948_PD CTL_REG(0x042C) +#define CR_ENABLE_PS_MANUAL_AGC CTL_REG(0x043C) +#define CR_CONFIG_PHILIPS CTL_REG(0x0440) +#define CR_SA2400_SER_AP CTL_REG(0x0444) +#define CR_I2C_WRITE CTL_REG(0x0444) +#define CR_SA2400_SER_RP CTL_REG(0x0448) +#define CR_RADIO_PE CTL_REG(0x0458) +#define CR_RST_BUS_MASTER CTL_REG(0x045C) +#define CR_RFCFG CTL_REG(0x0464) +#define CR_HSTSCHG CTL_REG(0x046C) +#define CR_PHY_ON CTL_REG(0x0474) +#define CR_RX_DELAY CTL_REG(0x0478) +#define CR_RX_PE_DELAY CTL_REG(0x047C) +#define CR_GPIO_1 CTL_REG(0x0490) +#define CR_GPIO_2 CTL_REG(0x0494) +#define CR_EncryBufMux CTL_REG(0x04A8) +#define CR_PS_CTRL CTL_REG(0x0500) +#define CR_ADDA_PWR_DWN CTL_REG(0x0504) +#define CR_ADDA_MBIAS_WARMTIME CTL_REG(0x0508) +#define CR_MAC_PS_STATE CTL_REG(0x050C) + +#define CR_INTERRUPT CTL_REG(0x0510) +#define INT_TX_COMPLETE 0x00000001 +#define INT_RX_COMPLETE 0x00000002 +#define INT_RETRY_FAIL 0x00000004 +#define INT_WAKEUP 0x00000008 +#define INT_DTIM_NOTIFY 0x00000020 +#define INT_CFG_NEXT_BCN 0x00000040 +#define INT_BUS_ABORT 0x00000080 +#define INT_TX_FIFO_READY 0x00000100 +#define INT_UART 0x00000200 +#define INT_TX_COMPLETE_EN 0x00010000 +#define INT_RX_COMPLETE_EN 0x00020000 +#define INT_RETRY_FAIL_EN 0x00040000 +#define INT_WAKEUP_EN 0x00080000 +#define INT_DTIM_NOTIFY_EN 0x00200000 +#define INT_CFG_NEXT_BCN_EN 0x00400000 +#define INT_BUS_ABORT_EN 0x00800000 +#define INT_TX_FIFO_READY_EN 0x01000000 +#define INT_UART_EN 0x02000000 + +#define CR_TSF_LOW_PART CTL_REG(0x0514) +#define CR_TSF_HIGH_PART CTL_REG(0x0518) + +/* Following three values are in time units (1024us) + * Following condition must be met: + * atim < tbtt < bcn + */ +#define CR_ATIM_WND_PERIOD CTL_REG(0x051C) +#define CR_BCN_INTERVAL CTL_REG(0x0520) +#define CR_PRE_TBTT CTL_REG(0x0524) +/* in units of TU(1024us) */ + +/* for UART support */ +#define CR_UART_RBR_THR_DLL CTL_REG(0x0540) +#define CR_UART_DLM_IER CTL_REG(0x0544) +#define CR_UART_IIR_FCR CTL_REG(0x0548) +#define CR_UART_LCR CTL_REG(0x054c) +#define CR_UART_MCR CTL_REG(0x0550) +#define CR_UART_LSR CTL_REG(0x0554) +#define CR_UART_MSR CTL_REG(0x0558) +#define CR_UART_ECR CTL_REG(0x055c) +#define CR_UART_STATUS CTL_REG(0x0560) + +#define CR_PCI_TX_ADDR_P1 CTL_REG(0x0600) +#define CR_PCI_TX_AddR_P2 CTL_REG(0x0604) +#define CR_PCI_RX_AddR_P1 CTL_REG(0x0608) +#define CR_PCI_RX_AddR_P2 CTL_REG(0x060C) + +/* must be overwritten if custom MAC address will be used */ +#define CR_MAC_ADDR_P1 CTL_REG(0x0610) +#define CR_MAC_ADDR_P2 CTL_REG(0x0614) +#define CR_BSSID_P1 CTL_REG(0x0618) +#define CR_BSSID_P2 CTL_REG(0x061C) +#define CR_BCN_PLCP_CFG CTL_REG(0x0620) +#define CR_GROUP_HASH_P1 CTL_REG(0x0624) +#define CR_GROUP_HASH_P2 CTL_REG(0x0628) +#define CR_RX_TIMEOUT CTL_REG(0x062C) + +/* Basic rates supported by the BSS. When producing ACK or CTS messages, the + * device will use a rate in this table that is less than or equal to the rate + * of the incoming frame which prompted the response */ +#define CR_BASIC_RATE_TBL CTL_REG(0x0630) +#define CR_RATE_1M 0x0001 /* 802.11b */ +#define CR_RATE_2M 0x0002 /* 802.11b */ +#define CR_RATE_5_5M 0x0004 /* 802.11b */ +#define CR_RATE_11M 0x0008 /* 802.11b */ +#define CR_RATE_6M 0x0100 /* 802.11g */ +#define CR_RATE_9M 0x0200 /* 802.11g */ +#define CR_RATE_12M 0x0400 /* 802.11g */ +#define CR_RATE_18M 0x0800 /* 802.11g */ +#define CR_RATE_24M 0x1000 /* 802.11g */ +#define CR_RATE_36M 0x2000 /* 802.11g */ +#define CR_RATE_48M 0x4000 /* 802.11g */ +#define CR_RATE_54M 0x8000 /* 802.11g */ +#define CR_RATES_80211G 0xff00 +#define CR_RATES_80211B 0x000f + +/* Mandatory rates required in the BSS. When producing ACK or CTS messages, if + * the device could not find an appropriate rate in CR_BASIC_RATE_TBL, it will + * look for a rate in this table that is less than or equal to the rate of + * the incoming frame. */ +#define CR_MANDATORY_RATE_TBL CTL_REG(0x0634) +#define CR_RTS_CTS_RATE CTL_REG(0x0638) + +#define CR_WEP_PROTECT CTL_REG(0x063C) +#define CR_RX_THRESHOLD CTL_REG(0x0640) + +/* register for controlling the LEDS */ +#define CR_LED CTL_REG(0x0644) +/* masks for controlling LEDs */ +#define LED1 0x0100 +#define LED2 0x0200 + +/* Seems to indicate that the configuration is over. + */ +#define CR_AFTER_PNP CTL_REG(0x0648) +#define CR_ACK_TIME_80211 CTL_REG(0x0658) + +#define CR_RX_OFFSET CTL_REG(0x065c) + +#define CR_PHY_DELAY CTL_REG(0x066C) +#define CR_BCN_FIFO CTL_REG(0x0670) +#define CR_SNIFFER_ON CTL_REG(0x0674) + +#define CR_ENCRYPTION_TYPE CTL_REG(0x0678) +#define NO_WEP 0 +#define WEP64 1 +#define WEP128 5 +#define WEP256 6 +#define ENC_SNIFFER 8 + +#define CR_ZD1211_RETRY_MAX CTL_REG(0x067C) + +#define CR_REG1 CTL_REG(0x0680) +/* Setting the bit UNLOCK_PHY_REGS disallows the write access to physical + * registers, so one could argue it is a LOCK bit. But calling it + * LOCK_PHY_REGS makes it confusing. + */ +#define UNLOCK_PHY_REGS 0x0080 + +#define CR_DEVICE_STATE CTL_REG(0x0684) +#define CR_UNDERRUN_CNT CTL_REG(0x0688) + +#define CR_RX_FILTER CTL_REG(0x068c) +#define RX_FILTER_ASSOC_RESPONSE 0x0002 +#define RX_FILTER_PROBE_RESPONSE 0x0020 +#define RX_FILTER_BEACON 0x0100 +#define RX_FILTER_AUTH 0x0800 +/* Sniff modus sets filter to 0xfffff */ + +#define CR_ACK_TIMEOUT_EXT CTL_REG(0x0690) +#define CR_BCN_FIFO_SEMAPHORE CTL_REG(0x0694) +#define CR_IFS_VALUE CTL_REG(0x0698) +#define CR_RX_TIME_OUT CTL_REG(0x069C) +#define CR_TOTAL_RX_FRM CTL_REG(0x06A0) +#define CR_CRC32_CNT CTL_REG(0x06A4) +#define CR_CRC16_CNT CTL_REG(0x06A8) +#define CR_DECRYPTION_ERR_UNI CTL_REG(0x06AC) +#define CR_RX_FIFO_OVERRUN CTL_REG(0x06B0) + +#define CR_DECRYPTION_ERR_MUL CTL_REG(0x06BC) + +#define CR_NAV_CNT CTL_REG(0x06C4) +#define CR_NAV_CCA CTL_REG(0x06C8) +#define CR_RETRY_CNT CTL_REG(0x06CC) + +#define CR_READ_TCB_ADDR CTL_REG(0x06E8) +#define CR_READ_RFD_ADDR CTL_REG(0x06EC) +#define CR_CWMIN_CWMAX CTL_REG(0x06F0) +#define CR_TOTAL_TX_FRM CTL_REG(0x06F4) + +/* CAM: Continuous Access Mode (power management) */ +#define CR_CAM_MODE CTL_REG(0x0700) +#define CR_CAM_ROLL_TB_LOW CTL_REG(0x0704) +#define CR_CAM_ROLL_TB_HIGH CTL_REG(0x0708) +#define CR_CAM_ADDRESS CTL_REG(0x070C) +#define CR_CAM_DATA CTL_REG(0x0710) + +#define CR_ROMDIR CTL_REG(0x0714) + +#define CR_DECRY_ERR_FLG_LOW CTL_REG(0x0714) +#define CR_DECRY_ERR_FLG_HIGH CTL_REG(0x0718) + +#define CR_WEPKEY0 CTL_REG(0x0720) +#define CR_WEPKEY1 CTL_REG(0x0724) +#define CR_WEPKEY2 CTL_REG(0x0728) +#define CR_WEPKEY3 CTL_REG(0x072C) +#define CR_WEPKEY4 CTL_REG(0x0730) +#define CR_WEPKEY5 CTL_REG(0x0734) +#define CR_WEPKEY6 CTL_REG(0x0738) +#define CR_WEPKEY7 CTL_REG(0x073C) +#define CR_WEPKEY8 CTL_REG(0x0740) +#define CR_WEPKEY9 CTL_REG(0x0744) +#define CR_WEPKEY10 CTL_REG(0x0748) +#define CR_WEPKEY11 CTL_REG(0x074C) +#define CR_WEPKEY12 CTL_REG(0x0750) +#define CR_WEPKEY13 CTL_REG(0x0754) +#define CR_WEPKEY14 CTL_REG(0x0758) +#define CR_WEPKEY15 CTL_REG(0x075c) +#define CR_TKIP_MODE CTL_REG(0x0760) + +#define CR_EEPROM_PROTECT0 CTL_REG(0x0758) +#define CR_EEPROM_PROTECT1 CTL_REG(0x075C) + +#define CR_DBG_FIFO_RD CTL_REG(0x0800) +#define CR_DBG_SELECT CTL_REG(0x0804) +#define CR_FIFO_Length CTL_REG(0x0808) + + +#define CR_RSSI_MGC CTL_REG(0x0810) + +#define CR_PON CTL_REG(0x0818) +#define CR_RX_ON CTL_REG(0x081C) +#define CR_TX_ON CTL_REG(0x0820) +#define CR_CHIP_EN CTL_REG(0x0824) +#define CR_LO_SW CTL_REG(0x0828) +#define CR_TXRX_SW CTL_REG(0x082C) +#define CR_S_MD CTL_REG(0x0830) + +#define CR_USB_DEBUG_PORT CTL_REG(0x0888) + +#define CR_ZD1211B_TX_PWR_CTL1 CTL_REG(0x0b00) +#define CR_ZD1211B_TX_PWR_CTL2 CTL_REG(0x0b04) +#define CR_ZD1211B_TX_PWR_CTL3 CTL_REG(0x0b08) +#define CR_ZD1211B_TX_PWR_CTL4 CTL_REG(0x0b0c) +#define CR_ZD1211B_AIFS_CTL1 CTL_REG(0x0b10) +#define CR_ZD1211B_AIFS_CTL2 CTL_REG(0x0b14) +#define CR_ZD1211B_TXOP CTL_REG(0x0b20) +#define CR_ZD1211B_RETRY_MAX CTL_REG(0x0b28) + +#define AP_RX_FILTER 0x0400feff +#define STA_RX_FILTER 0x0000ffff + +#define CWIN_SIZE 0x007f043f + + +#define HWINT_ENABLED 0x004f0000 +#define HWINT_DISABLED 0 + +#define E2P_PWR_INT_GUARD 8 +#define E2P_CHANNEL_COUNT 14 + +/* If you compare this addresses with the ZYDAS orignal driver, please notify + * that we use word mapping for the EEPROM. + */ + +/* + * Upper 16 bit contains the regulatory domain. + */ +#define E2P_SUBID E2P_REG(0x00) +#define E2P_POD E2P_REG(0x02) +#define E2P_MAC_ADDR_P1 E2P_REG(0x04) +#define E2P_MAC_ADDR_P2 E2P_REG(0x06) +#define E2P_PWR_CAL_VALUE1 E2P_REG(0x08) +#define E2P_PWR_CAL_VALUE2 E2P_REG(0x0a) +#define E2P_PWR_CAL_VALUE3 E2P_REG(0x0c) +#define E2P_PWR_CAL_VALUE4 E2P_REG(0x0e) +#define E2P_PWR_INT_VALUE1 E2P_REG(0x10) +#define E2P_PWR_INT_VALUE2 E2P_REG(0x12) +#define E2P_PWR_INT_VALUE3 E2P_REG(0x14) +#define E2P_PWR_INT_VALUE4 E2P_REG(0x16) + +/* Contains a bit for each allowed channel. It gives for Europe (ETSI 0x30) + * also only 11 channels. */ +#define E2P_ALLOWED_CHANNEL E2P_REG(0x18) + +#define E2P_PHY_REG E2P_REG(0x1a) +#define E2P_DEVICE_VER E2P_REG(0x20) +#define E2P_36M_CAL_VALUE1 E2P_REG(0x28) +#define E2P_36M_CAL_VALUE2 E2P_REG(0x2a) +#define E2P_36M_CAL_VALUE3 E2P_REG(0x2c) +#define E2P_36M_CAL_VALUE4 E2P_REG(0x2e) +#define E2P_11A_INT_VALUE1 E2P_REG(0x30) +#define E2P_11A_INT_VALUE2 E2P_REG(0x32) +#define E2P_11A_INT_VALUE3 E2P_REG(0x34) +#define E2P_11A_INT_VALUE4 E2P_REG(0x36) +#define E2P_48M_CAL_VALUE1 E2P_REG(0x38) +#define E2P_48M_CAL_VALUE2 E2P_REG(0x3a) +#define E2P_48M_CAL_VALUE3 E2P_REG(0x3c) +#define E2P_48M_CAL_VALUE4 E2P_REG(0x3e) +#define E2P_48M_INT_VALUE1 E2P_REG(0x40) +#define E2P_48M_INT_VALUE2 E2P_REG(0x42) +#define E2P_48M_INT_VALUE3 E2P_REG(0x44) +#define E2P_48M_INT_VALUE4 E2P_REG(0x46) +#define E2P_54M_CAL_VALUE1 E2P_REG(0x48) /* ??? */ +#define E2P_54M_CAL_VALUE2 E2P_REG(0x4a) +#define E2P_54M_CAL_VALUE3 E2P_REG(0x4c) +#define E2P_54M_CAL_VALUE4 E2P_REG(0x4e) +#define E2P_54M_INT_VALUE1 E2P_REG(0x50) +#define E2P_54M_INT_VALUE2 E2P_REG(0x52) +#define E2P_54M_INT_VALUE3 E2P_REG(0x54) +#define E2P_54M_INT_VALUE4 E2P_REG(0x56) + +/* All 16 bit values */ +#define FW_FIRMWARE_VER FW_REG(0) +/* non-zero if USB high speed connection */ +#define FW_USB_SPEED FW_REG(1) +#define FW_FIX_TX_RATE FW_REG(2) +/* Seems to be able to control LEDs over the firmware */ +#define FW_LINK_STATUS FW_REG(3) +#define FW_SOFT_RESET FW_REG(4) +#define FW_FLASH_CHK FW_REG(5) + +enum { + CR_BASE_OFFSET = 0x9000, + FW_START_OFFSET = 0xee00, + FW_BASE_ADDR_OFFSET = FW_START_OFFSET + 0x1d, + EEPROM_START_OFFSET = 0xf800, + EEPROM_SIZE = 0x800, /* words */ + LOAD_CODE_SIZE = 0xe, /* words */ + LOAD_VECT_SIZE = 0x10000 - 0xfff7, /* words */ + EEPROM_REGS_OFFSET = LOAD_CODE_SIZE + LOAD_VECT_SIZE, + E2P_BASE_OFFSET = EEPROM_START_OFFSET + + EEPROM_REGS_OFFSET, +}; + +#define FW_REG_TABLE_ADDR USB_ADDR(FW_START_OFFSET + 0x1d) + +enum { + /* indices for ofdm_cal_values */ + OFDM_36M_INDEX = 0, + OFDM_48M_INDEX = 1, + OFDM_54M_INDEX = 2, +}; + +struct zd_chip { + struct zd_usb usb; + struct zd_rf rf; + struct mutex mutex; + u8 e2p_mac[ETH_ALEN]; + /* EepSetPoint in the vendor driver */ + u8 pwr_cal_values[E2P_CHANNEL_COUNT]; + /* integration values in the vendor driver */ + u8 pwr_int_values[E2P_CHANNEL_COUNT]; + /* SetPointOFDM in the vendor driver */ + u8 ofdm_cal_values[3][E2P_CHANNEL_COUNT]; + u8 pa_type:4, patch_cck_gain:1, patch_cr157:1, patch_6m_band_edge:1, + is_zd1211b:1; +}; + +static inline struct zd_chip *zd_usb_to_chip(struct zd_usb *usb) +{ + return container_of(usb, struct zd_chip, usb); +} + +static inline struct zd_chip *zd_rf_to_chip(struct zd_rf *rf) +{ + return container_of(rf, struct zd_chip, rf); +} + +#define zd_chip_dev(chip) (&(chip)->usb.intf->dev) + +void zd_chip_init(struct zd_chip *chip, + struct net_device *netdev, + struct usb_interface *intf); +void zd_chip_clear(struct zd_chip *chip); +int zd_chip_init_hw(struct zd_chip *chip, u8 device_type); +int zd_chip_reset(struct zd_chip *chip); + +static inline int zd_ioread16v_locked(struct zd_chip *chip, u16 *values, + const zd_addr_t *addresses, + unsigned int count) +{ + ZD_ASSERT(mutex_is_locked(&chip->mutex)); + return zd_usb_ioread16v(&chip->usb, values, addresses, count); +} + +static inline int zd_ioread16_locked(struct zd_chip *chip, u16 *value, + const zd_addr_t addr) +{ + ZD_ASSERT(mutex_is_locked(&chip->mutex)); + return zd_usb_ioread16(&chip->usb, value, addr); +} + +int zd_ioread32v_locked(struct zd_chip *chip, u32 *values, + const zd_addr_t *addresses, unsigned int count); + +static inline int zd_ioread32_locked(struct zd_chip *chip, u32 *value, + const zd_addr_t addr) +{ + return zd_ioread32v_locked(chip, value, (const zd_addr_t *)&addr, 1); +} + +static inline int zd_iowrite16_locked(struct zd_chip *chip, u16 value, + zd_addr_t addr) +{ + struct zd_ioreq16 ioreq; + + ZD_ASSERT(mutex_is_locked(&chip->mutex)); + ioreq.addr = addr; + ioreq.value = value; + + return zd_usb_iowrite16v(&chip->usb, &ioreq, 1); +} + +int zd_iowrite16a_locked(struct zd_chip *chip, + const struct zd_ioreq16 *ioreqs, unsigned int count); + +int _zd_iowrite32v_locked(struct zd_chip *chip, const struct zd_ioreq32 *ioreqs, + unsigned int count); + +static inline int zd_iowrite32_locked(struct zd_chip *chip, u32 value, + zd_addr_t addr) +{ + struct zd_ioreq32 ioreq; + + ioreq.addr = addr; + ioreq.value = value; + + return _zd_iowrite32v_locked(chip, &ioreq, 1); +} + +int zd_iowrite32a_locked(struct zd_chip *chip, + const struct zd_ioreq32 *ioreqs, unsigned int count); + +static inline int zd_rfwrite_locked(struct zd_chip *chip, u32 value, u8 bits) +{ + ZD_ASSERT(mutex_is_locked(&chip->mutex)); + return zd_usb_rfwrite(&chip->usb, value, bits); +} + +int zd_rfwritev_locked(struct zd_chip *chip, + const u32* values, unsigned int count, u8 bits); + +/* Locking functions for reading and writing registers. + * The different parameters are intentional. + */ +int zd_ioread16(struct zd_chip *chip, zd_addr_t addr, u16 *value); +int zd_iowrite16(struct zd_chip *chip, zd_addr_t addr, u16 value); +int zd_ioread32(struct zd_chip *chip, zd_addr_t addr, u32 *value); +int zd_iowrite32(struct zd_chip *chip, zd_addr_t addr, u32 value); +int zd_ioread32v(struct zd_chip *chip, const zd_addr_t *addresses, + u32 *values, unsigned int count); +int zd_iowrite32a(struct zd_chip *chip, const struct zd_ioreq32 *ioreqs, + unsigned int count); + +int zd_chip_set_channel(struct zd_chip *chip, u8 channel); +static inline u8 _zd_chip_get_channel(struct zd_chip *chip) +{ + return chip->rf.channel; +} +u8 zd_chip_get_channel(struct zd_chip *chip); +int zd_read_regdomain(struct zd_chip *chip, u8 *regdomain); +void zd_get_e2p_mac_addr(struct zd_chip *chip, u8 *mac_addr); +int zd_read_mac_addr(struct zd_chip *chip, u8 *mac_addr); +int zd_write_mac_addr(struct zd_chip *chip, const u8 *mac_addr); +int zd_chip_switch_radio_on(struct zd_chip *chip); +int zd_chip_switch_radio_off(struct zd_chip *chip); +int zd_chip_enable_int(struct zd_chip *chip); +void zd_chip_disable_int(struct zd_chip *chip); +int zd_chip_enable_rx(struct zd_chip *chip); +void zd_chip_disable_rx(struct zd_chip *chip); +int zd_chip_enable_hwint(struct zd_chip *chip); +int zd_chip_disable_hwint(struct zd_chip *chip); + +static inline int zd_get_encryption_type(struct zd_chip *chip, u32 *type) +{ + return zd_ioread32(chip, CR_ENCRYPTION_TYPE, type); +} + +static inline int zd_set_encryption_type(struct zd_chip *chip, u32 type) +{ + return zd_iowrite32(chip, CR_ENCRYPTION_TYPE, type); +} + +static inline int zd_chip_get_basic_rates(struct zd_chip *chip, u16 *cr_rates) +{ + return zd_ioread16(chip, CR_BASIC_RATE_TBL, cr_rates); +} + +int zd_chip_set_basic_rates(struct zd_chip *chip, u16 cr_rates); + +static inline int zd_chip_set_rx_filter(struct zd_chip *chip, u32 filter) +{ + return zd_iowrite32(chip, CR_RX_FILTER, filter); +} + +int zd_chip_lock_phy_regs(struct zd_chip *chip); +int zd_chip_unlock_phy_regs(struct zd_chip *chip); + +enum led_status { + LED_OFF = 0, + LED_ON = 1, + LED_FLIP = 2, + LED_STATUS = 3, +}; + +int zd_chip_led_status(struct zd_chip *chip, int led, enum led_status status); +int zd_chip_led_flip(struct zd_chip *chip, int led, + const unsigned int *phases_msecs, unsigned int count); + +int zd_set_beacon_interval(struct zd_chip *chip, u32 interval); + +static inline int zd_get_beacon_interval(struct zd_chip *chip, u32 *interval) +{ + return zd_ioread32(chip, CR_BCN_INTERVAL, interval); +} + +struct rx_status; + +u8 zd_rx_qual_percent(const void *rx_frame, unsigned int size, + const struct rx_status *status); +u8 zd_rx_strength_percent(u8 rssi); + +u16 zd_rx_rate(const void *rx_frame, const struct rx_status *status); + +#endif /* _ZD_CHIP_H */ diff --git a/drivers/net/wireless/zd1211rw/zd_def.h b/drivers/net/wireless/zd1211rw/zd_def.h new file mode 100644 index 00000000000..465906812fc --- /dev/null +++ b/drivers/net/wireless/zd1211rw/zd_def.h @@ -0,0 +1,48 @@ +/* zd_def.h + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#ifndef _ZD_DEF_H +#define _ZD_DEF_H + +#include +#include +#include +#include + +#define dev_printk_f(level, dev, fmt, args...) \ + dev_printk(level, dev, "%s() " fmt, __func__, ##args) + +#ifdef DEBUG +# define dev_dbg_f(dev, fmt, args...) \ + dev_printk_f(KERN_DEBUG, dev, fmt, ## args) +#else +# define dev_dbg_f(dev, fmt, args...) do { (void)(dev); } while (0) +#endif /* DEBUG */ + +#ifdef DEBUG +# define ZD_ASSERT(x) \ +do { \ + if (!(x)) { \ + pr_debug("%s:%d ASSERT %s VIOLATED!\n", \ + __FILE__, __LINE__, __stringify(x)); \ + } \ +} while (0) +#else +# define ZD_ASSERT(x) do { } while (0) +#endif + +#endif /* _ZD_DEF_H */ diff --git a/drivers/net/wireless/zd1211rw/zd_ieee80211.c b/drivers/net/wireless/zd1211rw/zd_ieee80211.c new file mode 100644 index 00000000000..66905f7b61f --- /dev/null +++ b/drivers/net/wireless/zd1211rw/zd_ieee80211.c @@ -0,0 +1,191 @@ +/* zd_ieee80211.c + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +/* + * A lot of this code is generic and should be moved into the upper layers + * at some point. + */ + +#include +#include +#include +#include + +#include "zd_def.h" +#include "zd_ieee80211.h" +#include "zd_mac.h" + +static const struct channel_range channel_ranges[] = { + [0] = { 0, 0}, + [ZD_REGDOMAIN_FCC] = { 1, 12}, + [ZD_REGDOMAIN_IC] = { 1, 12}, + [ZD_REGDOMAIN_ETSI] = { 1, 14}, + [ZD_REGDOMAIN_JAPAN] = { 1, 14}, + [ZD_REGDOMAIN_SPAIN] = { 1, 14}, + [ZD_REGDOMAIN_FRANCE] = { 1, 14}, + [ZD_REGDOMAIN_JAPAN_ADD] = {14, 15}, +}; + +const struct channel_range *zd_channel_range(u8 regdomain) +{ + if (regdomain >= ARRAY_SIZE(channel_ranges)) + regdomain = 0; + return &channel_ranges[regdomain]; +} + +int zd_regdomain_supports_channel(u8 regdomain, u8 channel) +{ + const struct channel_range *range = zd_channel_range(regdomain); + return range->start <= channel && channel < range->end; +} + +int zd_regdomain_supported(u8 regdomain) +{ + const struct channel_range *range = zd_channel_range(regdomain); + return range->start != 0; +} + +/* Stores channel frequencies in MHz. */ +static const u16 channel_frequencies[] = { + 2412, 2417, 2422, 2427, 2432, 2437, 2442, 2447, + 2452, 2457, 2462, 2467, 2472, 2484, +}; + +#define NUM_CHANNELS ARRAY_SIZE(channel_frequencies) + +static int compute_freq(struct iw_freq *freq, u32 mhz, u32 hz) +{ + u32 factor; + + freq->e = 0; + if (mhz >= 1000000000U) { + pr_debug("zd1211 mhz %u to large\n", mhz); + freq->m = 0; + return -EINVAL; + } + + factor = 1000; + while (mhz >= factor) { + + freq->e += 1; + factor *= 10; + } + + factor /= 1000U; + freq->m = mhz * (1000000U/factor) + hz/factor; + + return 0; +} + +int zd_channel_to_freq(struct iw_freq *freq, u8 channel) +{ + if (channel > NUM_CHANNELS) { + freq->m = 0; + freq->e = 0; + return -EINVAL; + } + if (!channel) { + freq->m = 0; + freq->e = 0; + return -EINVAL; + } + return compute_freq(freq, channel_frequencies[channel-1], 0); +} + +static int freq_to_mhz(const struct iw_freq *freq) +{ + u32 factor; + int e; + + /* Such high frequencies are not supported. */ + if (freq->e > 6) + return -EINVAL; + + factor = 1; + for (e = freq->e; e > 0; --e) { + factor *= 10; + } + factor = 1000000U / factor; + + if (freq->m % factor) { + return -EINVAL; + } + + return freq->m / factor; +} + +int zd_find_channel(u8 *channel, const struct iw_freq *freq) +{ + int i, r; + u32 mhz; + + if (!(freq->flags & IW_FREQ_FIXED)) + return 0; + + if (freq->m < 1000) { + if (freq->m > NUM_CHANNELS || freq->m == 0) + return -EINVAL; + *channel = freq->m; + return 1; + } + + r = freq_to_mhz(freq); + if (r < 0) + return r; + mhz = r; + + for (i = 0; i < NUM_CHANNELS; i++) { + if (mhz == channel_frequencies[i]) { + *channel = i+1; + return 1; + } + } + + return -EINVAL; +} + +int zd_geo_init(struct ieee80211_device *ieee, u8 regdomain) +{ + struct ieee80211_geo geo; + const struct channel_range *range; + int i; + u8 channel; + + dev_dbg(zd_mac_dev(zd_netdev_mac(ieee->dev)), + "regdomain %#04x\n", regdomain); + + range = zd_channel_range(regdomain); + if (range->start == 0) { + dev_err(zd_mac_dev(zd_netdev_mac(ieee->dev)), + "zd1211 regdomain %#04x not supported\n", + regdomain); + return -EINVAL; + } + + memset(&geo, 0, sizeof(geo)); + + for (i = 0, channel = range->start; channel < range->end; channel++) { + struct ieee80211_channel *chan = &geo.bg[i++]; + chan->freq = channel_frequencies[channel - 1]; + chan->channel = channel; + } + + geo.bg_channels = i; + memcpy(geo.name, "XX ", 4); + ieee80211_set_geo(ieee, &geo); + return 0; +} diff --git a/drivers/net/wireless/zd1211rw/zd_ieee80211.h b/drivers/net/wireless/zd1211rw/zd_ieee80211.h new file mode 100644 index 00000000000..36329890dfe --- /dev/null +++ b/drivers/net/wireless/zd1211rw/zd_ieee80211.h @@ -0,0 +1,85 @@ +#ifndef _ZD_IEEE80211_H +#define _ZD_IEEE80211_H + +#include +#include "zd_types.h" + +/* Additional definitions from the standards. + */ + +#define ZD_REGDOMAIN_FCC 0x10 +#define ZD_REGDOMAIN_IC 0x20 +#define ZD_REGDOMAIN_ETSI 0x30 +#define ZD_REGDOMAIN_SPAIN 0x31 +#define ZD_REGDOMAIN_FRANCE 0x32 +#define ZD_REGDOMAIN_JAPAN_ADD 0x40 +#define ZD_REGDOMAIN_JAPAN 0x41 + +enum { + MIN_CHANNEL24 = 1, + MAX_CHANNEL24 = 14, +}; + +struct channel_range { + u8 start; + u8 end; /* exclusive (channel must be less than end) */ +}; + +struct iw_freq; + +int zd_geo_init(struct ieee80211_device *ieee, u8 regdomain); + +const struct channel_range *zd_channel_range(u8 regdomain); +int zd_regdomain_supports_channel(u8 regdomain, u8 channel); +int zd_regdomain_supported(u8 regdomain); + +/* for 2.4 GHz band */ +int zd_channel_to_freq(struct iw_freq *freq, u8 channel); +int zd_find_channel(u8 *channel, const struct iw_freq *freq); + +#define ZD_PLCP_SERVICE_LENGTH_EXTENSION 0x80 + +struct ofdm_plcp_header { + u8 prefix[3]; + __le16 service; +} __attribute__((packed)); + +static inline u8 zd_ofdm_plcp_header_rate( + const struct ofdm_plcp_header *header) +{ + return header->prefix[0] & 0xf; +} + +#define ZD_OFDM_RATE_6M 0xb +#define ZD_OFDM_RATE_9M 0xf +#define ZD_OFDM_RATE_12M 0xa +#define ZD_OFDM_RATE_18M 0xe +#define ZD_OFDM_RATE_24M 0x9 +#define ZD_OFDM_RATE_36M 0xd +#define ZD_OFDM_RATE_48M 0x8 +#define ZD_OFDM_RATE_54M 0xc + +struct cck_plcp_header { + u8 signal; + u8 service; + __le16 length; + __le16 crc16; +} __attribute__((packed)); + +static inline u8 zd_cck_plcp_header_rate(const struct cck_plcp_header *header) +{ + return header->signal; +} + +#define ZD_CCK_SIGNAL_1M 0x0a +#define ZD_CCK_SIGNAL_2M 0x14 +#define ZD_CCK_SIGNAL_5M5 0x37 +#define ZD_CCK_SIGNAL_11M 0x6e + +enum ieee80211_std { + IEEE80211B = 0x01, + IEEE80211A = 0x02, + IEEE80211G = 0x04, +}; + +#endif /* _ZD_IEEE80211_H */ diff --git a/drivers/net/wireless/zd1211rw/zd_mac.c b/drivers/net/wireless/zd1211rw/zd_mac.c new file mode 100644 index 00000000000..bbe067ec7de --- /dev/null +++ b/drivers/net/wireless/zd1211rw/zd_mac.c @@ -0,0 +1,1055 @@ +/* zd_mac.c + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#include +#include +#include +#include +#include +#include + +#include "zd_def.h" +#include "zd_chip.h" +#include "zd_mac.h" +#include "zd_ieee80211.h" +#include "zd_netdev.h" +#include "zd_rf.h" +#include "zd_util.h" + +static void ieee_init(struct ieee80211_device *ieee); +static void softmac_init(struct ieee80211softmac_device *sm); + +int zd_mac_init(struct zd_mac *mac, + struct net_device *netdev, + struct usb_interface *intf) +{ + struct ieee80211_device *ieee = zd_netdev_ieee80211(netdev); + + memset(mac, 0, sizeof(*mac)); + spin_lock_init(&mac->lock); + mac->netdev = netdev; + + ieee_init(ieee); + softmac_init(ieee80211_priv(netdev)); + zd_chip_init(&mac->chip, netdev, intf); + return 0; +} + +static int reset_channel(struct zd_mac *mac) +{ + int r; + unsigned long flags; + const struct channel_range *range; + + spin_lock_irqsave(&mac->lock, flags); + range = zd_channel_range(mac->regdomain); + if (!range->start) { + r = -EINVAL; + goto out; + } + mac->requested_channel = range->start; + r = 0; +out: + spin_unlock_irqrestore(&mac->lock, flags); + return r; +} + +int zd_mac_init_hw(struct zd_mac *mac, u8 device_type) +{ + int r; + struct zd_chip *chip = &mac->chip; + u8 addr[ETH_ALEN]; + u8 default_regdomain; + + r = zd_chip_enable_int(chip); + if (r) + goto out; + r = zd_chip_init_hw(chip, device_type); + if (r) + goto disable_int; + + zd_get_e2p_mac_addr(chip, addr); + r = zd_write_mac_addr(chip, addr); + if (r) + goto disable_int; + ZD_ASSERT(!irqs_disabled()); + spin_lock_irq(&mac->lock); + memcpy(mac->netdev->dev_addr, addr, ETH_ALEN); + spin_unlock_irq(&mac->lock); + + r = zd_read_regdomain(chip, &default_regdomain); + if (r) + goto disable_int; + if (!zd_regdomain_supported(default_regdomain)) { + dev_dbg_f(zd_mac_dev(mac), + "Regulatory Domain %#04x is not supported.\n", + default_regdomain); + r = -EINVAL; + goto disable_int; + } + spin_lock_irq(&mac->lock); + mac->regdomain = mac->default_regdomain = default_regdomain; + spin_unlock_irq(&mac->lock); + r = reset_channel(mac); + if (r) + goto disable_int; + + r = zd_set_encryption_type(chip, NO_WEP); + if (r) + goto disable_int; + + r = zd_geo_init(zd_mac_to_ieee80211(mac), mac->regdomain); + if (r) + goto disable_int; + + r = 0; +disable_int: + zd_chip_disable_int(chip); +out: + return r; +} + +void zd_mac_clear(struct zd_mac *mac) +{ + /* Aquire the lock. */ + spin_lock(&mac->lock); + spin_unlock(&mac->lock); + zd_chip_clear(&mac->chip); + memset(mac, 0, sizeof(*mac)); +} + +static int reset_mode(struct zd_mac *mac) +{ + struct ieee80211_device *ieee = zd_mac_to_ieee80211(mac); + struct zd_ioreq32 ioreqs[3] = { + { CR_RX_FILTER, RX_FILTER_BEACON|RX_FILTER_PROBE_RESPONSE| + RX_FILTER_AUTH|RX_FILTER_ASSOC_RESPONSE }, + { CR_SNIFFER_ON, 0U }, + { CR_ENCRYPTION_TYPE, NO_WEP }, + }; + + if (ieee->iw_mode == IW_MODE_MONITOR) { + ioreqs[0].value = 0xffffffff; + ioreqs[1].value = 0x1; + ioreqs[2].value = ENC_SNIFFER; + } + + return zd_iowrite32a(&mac->chip, ioreqs, 3); +} + +int zd_mac_open(struct net_device *netdev) +{ + struct zd_mac *mac = zd_netdev_mac(netdev); + struct zd_chip *chip = &mac->chip; + int r; + + r = zd_chip_enable_int(chip); + if (r < 0) + goto out; + + r = zd_chip_set_basic_rates(chip, CR_RATES_80211B | CR_RATES_80211G); + if (r < 0) + goto disable_int; + r = reset_mode(mac); + if (r) + goto disable_int; + r = zd_chip_switch_radio_on(chip); + if (r < 0) + goto disable_int; + r = zd_chip_set_channel(chip, mac->requested_channel); + if (r < 0) + goto disable_radio; + r = zd_chip_enable_rx(chip); + if (r < 0) + goto disable_radio; + r = zd_chip_enable_hwint(chip); + if (r < 0) + goto disable_rx; + + ieee80211softmac_start(netdev); + return 0; +disable_rx: + zd_chip_disable_rx(chip); +disable_radio: + zd_chip_switch_radio_off(chip); +disable_int: + zd_chip_disable_int(chip); +out: + return r; +} + +int zd_mac_stop(struct net_device *netdev) +{ + struct zd_mac *mac = zd_netdev_mac(netdev); + struct zd_chip *chip = &mac->chip; + + /* + * The order here deliberately is a little different from the open() + * method, since we need to make sure there is no opportunity for RX + * frames to be processed by softmac after we have stopped it. + */ + + zd_chip_disable_rx(chip); + ieee80211softmac_stop(netdev); + + zd_chip_disable_hwint(chip); + zd_chip_switch_radio_off(chip); + zd_chip_disable_int(chip); + + return 0; +} + +int zd_mac_set_mac_address(struct net_device *netdev, void *p) +{ + int r; + unsigned long flags; + struct sockaddr *addr = p; + struct zd_mac *mac = zd_netdev_mac(netdev); + struct zd_chip *chip = &mac->chip; + + if (!is_valid_ether_addr(addr->sa_data)) + return -EADDRNOTAVAIL; + + dev_dbg_f(zd_mac_dev(mac), + "Setting MAC to " MAC_FMT "\n", MAC_ARG(addr->sa_data)); + + r = zd_write_mac_addr(chip, addr->sa_data); + if (r) + return r; + + spin_lock_irqsave(&mac->lock, flags); + memcpy(netdev->dev_addr, addr->sa_data, ETH_ALEN); + spin_unlock_irqrestore(&mac->lock, flags); + + return 0; +} + +int zd_mac_set_regdomain(struct zd_mac *mac, u8 regdomain) +{ + int r; + u8 channel; + + ZD_ASSERT(!irqs_disabled()); + spin_lock_irq(&mac->lock); + if (regdomain == 0) { + regdomain = mac->default_regdomain; + } + if (!zd_regdomain_supported(regdomain)) { + spin_unlock_irq(&mac->lock); + return -EINVAL; + } + mac->regdomain = regdomain; + channel = mac->requested_channel; + spin_unlock_irq(&mac->lock); + + r = zd_geo_init(zd_mac_to_ieee80211(mac), regdomain); + if (r) + return r; + if (!zd_regdomain_supports_channel(regdomain, channel)) { + r = reset_channel(mac); + if (r) + return r; + } + + return 0; +} + +u8 zd_mac_get_regdomain(struct zd_mac *mac) +{ + unsigned long flags; + u8 regdomain; + + spin_lock_irqsave(&mac->lock, flags); + regdomain = mac->regdomain; + spin_unlock_irqrestore(&mac->lock, flags); + return regdomain; +} + +static void set_channel(struct net_device *netdev, u8 channel) +{ + struct zd_mac *mac = zd_netdev_mac(netdev); + + dev_dbg_f(zd_mac_dev(mac), "channel %d\n", channel); + + zd_chip_set_channel(&mac->chip, channel); +} + +/* TODO: Should not work in Managed mode. */ +int zd_mac_request_channel(struct zd_mac *mac, u8 channel) +{ + unsigned long lock_flags; + struct ieee80211_device *ieee = zd_mac_to_ieee80211(mac); + + if (ieee->iw_mode == IW_MODE_INFRA) + return -EPERM; + + spin_lock_irqsave(&mac->lock, lock_flags); + if (!zd_regdomain_supports_channel(mac->regdomain, channel)) { + spin_unlock_irqrestore(&mac->lock, lock_flags); + return -EINVAL; + } + mac->requested_channel = channel; + spin_unlock_irqrestore(&mac->lock, lock_flags); + if (netif_running(mac->netdev)) + return zd_chip_set_channel(&mac->chip, channel); + else + return 0; +} + +int zd_mac_get_channel(struct zd_mac *mac, u8 *channel, u8 *flags) +{ + struct ieee80211_device *ieee = zd_mac_to_ieee80211(mac); + + *channel = zd_chip_get_channel(&mac->chip); + if (ieee->iw_mode != IW_MODE_INFRA) { + spin_lock_irq(&mac->lock); + *flags = *channel == mac->requested_channel ? + MAC_FIXED_CHANNEL : 0; + spin_unlock(&mac->lock); + } else { + *flags = 0; + } + dev_dbg_f(zd_mac_dev(mac), "channel %u flags %u\n", *channel, *flags); + return 0; +} + +/* If wrong rate is given, we are falling back to the slowest rate: 1MBit/s */ +static u8 cs_typed_rate(u8 cs_rate) +{ + static const u8 typed_rates[16] = { + [ZD_CS_CCK_RATE_1M] = ZD_CS_CCK|ZD_CS_CCK_RATE_1M, + [ZD_CS_CCK_RATE_2M] = ZD_CS_CCK|ZD_CS_CCK_RATE_2M, + [ZD_CS_CCK_RATE_5_5M] = ZD_CS_CCK|ZD_CS_CCK_RATE_5_5M, + [ZD_CS_CCK_RATE_11M] = ZD_CS_CCK|ZD_CS_CCK_RATE_11M, + [ZD_OFDM_RATE_6M] = ZD_CS_OFDM|ZD_OFDM_RATE_6M, + [ZD_OFDM_RATE_9M] = ZD_CS_OFDM|ZD_OFDM_RATE_9M, + [ZD_OFDM_RATE_12M] = ZD_CS_OFDM|ZD_OFDM_RATE_12M, + [ZD_OFDM_RATE_18M] = ZD_CS_OFDM|ZD_OFDM_RATE_18M, + [ZD_OFDM_RATE_24M] = ZD_CS_OFDM|ZD_OFDM_RATE_24M, + [ZD_OFDM_RATE_36M] = ZD_CS_OFDM|ZD_OFDM_RATE_36M, + [ZD_OFDM_RATE_48M] = ZD_CS_OFDM|ZD_OFDM_RATE_48M, + [ZD_OFDM_RATE_54M] = ZD_CS_OFDM|ZD_OFDM_RATE_54M, + }; + + ZD_ASSERT(ZD_CS_RATE_MASK == 0x0f); + return typed_rates[cs_rate & ZD_CS_RATE_MASK]; +} + +/* Fallback to lowest rate, if rate is unknown. */ +static u8 rate_to_cs_rate(u8 rate) +{ + switch (rate) { + case IEEE80211_CCK_RATE_2MB: + return ZD_CS_CCK_RATE_2M; + case IEEE80211_CCK_RATE_5MB: + return ZD_CS_CCK_RATE_5_5M; + case IEEE80211_CCK_RATE_11MB: + return ZD_CS_CCK_RATE_11M; + case IEEE80211_OFDM_RATE_6MB: + return ZD_OFDM_RATE_6M; + case IEEE80211_OFDM_RATE_9MB: + return ZD_OFDM_RATE_9M; + case IEEE80211_OFDM_RATE_12MB: + return ZD_OFDM_RATE_12M; + case IEEE80211_OFDM_RATE_18MB: + return ZD_OFDM_RATE_18M; + case IEEE80211_OFDM_RATE_24MB: + return ZD_OFDM_RATE_24M; + case IEEE80211_OFDM_RATE_36MB: + return ZD_OFDM_RATE_36M; + case IEEE80211_OFDM_RATE_48MB: + return ZD_OFDM_RATE_48M; + case IEEE80211_OFDM_RATE_54MB: + return ZD_OFDM_RATE_54M; + } + return ZD_CS_CCK_RATE_1M; +} + +int zd_mac_set_mode(struct zd_mac *mac, u32 mode) +{ + struct ieee80211_device *ieee; + + switch (mode) { + case IW_MODE_AUTO: + case IW_MODE_ADHOC: + case IW_MODE_INFRA: + mac->netdev->type = ARPHRD_ETHER; + break; + case IW_MODE_MONITOR: + mac->netdev->type = ARPHRD_IEEE80211_RADIOTAP; + break; + default: + dev_dbg_f(zd_mac_dev(mac), "wrong mode %u\n", mode); + return -EINVAL; + } + + ieee = zd_mac_to_ieee80211(mac); + ZD_ASSERT(!irqs_disabled()); + spin_lock_irq(&ieee->lock); + ieee->iw_mode = mode; + spin_unlock_irq(&ieee->lock); + + if (netif_running(mac->netdev)) + return reset_mode(mac); + + return 0; +} + +int zd_mac_get_mode(struct zd_mac *mac, u32 *mode) +{ + unsigned long flags; + struct ieee80211_device *ieee; + + ieee = zd_mac_to_ieee80211(mac); + spin_lock_irqsave(&ieee->lock, flags); + *mode = ieee->iw_mode; + spin_unlock_irqrestore(&ieee->lock, flags); + return 0; +} + +int zd_mac_get_range(struct zd_mac *mac, struct iw_range *range) +{ + int i; + const struct channel_range *channel_range; + u8 regdomain; + + memset(range, 0, sizeof(*range)); + + /* FIXME: Not so important and depends on the mode. For 802.11g + * usually this value is used. It seems to be that Bit/s number is + * given here. + */ + range->throughput = 27 * 1000 * 1000; + + range->max_qual.qual = 100; + range->max_qual.level = 100; + + /* FIXME: Needs still to be tuned. */ + range->avg_qual.qual = 71; + range->avg_qual.level = 80; + + /* FIXME: depends on standard? */ + range->min_rts = 256; + range->max_rts = 2346; + + range->min_frag = MIN_FRAG_THRESHOLD; + range->max_frag = MAX_FRAG_THRESHOLD; + + range->max_encoding_tokens = WEP_KEYS; + range->num_encoding_sizes = 2; + range->encoding_size[0] = 5; + range->encoding_size[1] = WEP_KEY_LEN; + + range->we_version_compiled = WIRELESS_EXT; + range->we_version_source = 20; + + ZD_ASSERT(!irqs_disabled()); + spin_lock_irq(&mac->lock); + regdomain = mac->regdomain; + spin_unlock_irq(&mac->lock); + channel_range = zd_channel_range(regdomain); + + range->num_channels = channel_range->end - channel_range->start; + range->old_num_channels = range->num_channels; + range->num_frequency = range->num_channels; + range->old_num_frequency = range->num_frequency; + + for (i = 0; i < range->num_frequency; i++) { + struct iw_freq *freq = &range->freq[i]; + freq->i = channel_range->start + i; + zd_channel_to_freq(freq, freq->i); + } + + return 0; +} + +static int zd_calc_tx_length_us(u8 *service, u8 cs_rate, u16 tx_length) +{ + static const u8 rate_divisor[] = { + [ZD_CS_CCK_RATE_1M] = 1, + [ZD_CS_CCK_RATE_2M] = 2, + [ZD_CS_CCK_RATE_5_5M] = 11, /* bits must be doubled */ + [ZD_CS_CCK_RATE_11M] = 11, + [ZD_OFDM_RATE_6M] = 6, + [ZD_OFDM_RATE_9M] = 9, + [ZD_OFDM_RATE_12M] = 12, + [ZD_OFDM_RATE_18M] = 18, + [ZD_OFDM_RATE_24M] = 24, + [ZD_OFDM_RATE_36M] = 36, + [ZD_OFDM_RATE_48M] = 48, + [ZD_OFDM_RATE_54M] = 54, + }; + + u32 bits = (u32)tx_length * 8; + u32 divisor; + + divisor = rate_divisor[cs_rate]; + if (divisor == 0) + return -EINVAL; + + switch (cs_rate) { + case ZD_CS_CCK_RATE_5_5M: + bits = (2*bits) + 10; /* round up to the next integer */ + break; + case ZD_CS_CCK_RATE_11M: + if (service) { + u32 t = bits % 11; + *service &= ~ZD_PLCP_SERVICE_LENGTH_EXTENSION; + if (0 < t && t <= 3) { + *service |= ZD_PLCP_SERVICE_LENGTH_EXTENSION; + } + } + bits += 10; /* round up to the next integer */ + break; + } + + return bits/divisor; +} + +enum { + R2M_SHORT_PREAMBLE = 0x01, + R2M_11A = 0x02, +}; + +static u8 cs_rate_to_modulation(u8 cs_rate, int flags) +{ + u8 modulation; + + modulation = cs_typed_rate(cs_rate); + if (flags & R2M_SHORT_PREAMBLE) { + switch (ZD_CS_RATE(modulation)) { + case ZD_CS_CCK_RATE_2M: + case ZD_CS_CCK_RATE_5_5M: + case ZD_CS_CCK_RATE_11M: + modulation |= ZD_CS_CCK_PREA_SHORT; + return modulation; + } + } + if (flags & R2M_11A) { + if (ZD_CS_TYPE(modulation) == ZD_CS_OFDM) + modulation |= ZD_CS_OFDM_MODE_11A; + } + return modulation; +} + +static void cs_set_modulation(struct zd_mac *mac, struct zd_ctrlset *cs, + struct ieee80211_hdr_4addr *hdr) +{ + struct ieee80211softmac_device *softmac = ieee80211_priv(mac->netdev); + u16 ftype = WLAN_FC_GET_TYPE(le16_to_cpu(hdr->frame_ctl)); + u8 rate, cs_rate; + int is_mgt = (ftype == IEEE80211_FTYPE_MGMT) != 0; + + /* FIXME: 802.11a? short preamble? */ + rate = ieee80211softmac_suggest_txrate(softmac, + is_multicast_ether_addr(hdr->addr1), is_mgt); + + cs_rate = rate_to_cs_rate(rate); + cs->modulation = cs_rate_to_modulation(cs_rate, 0); +} + +static void cs_set_control(struct zd_mac *mac, struct zd_ctrlset *cs, + struct ieee80211_hdr_4addr *header) +{ + unsigned int tx_length = le16_to_cpu(cs->tx_length); + u16 fctl = le16_to_cpu(header->frame_ctl); + u16 ftype = WLAN_FC_GET_TYPE(fctl); + u16 stype = WLAN_FC_GET_STYPE(fctl); + + /* + * CONTROL: + * - start at 0x00 + * - if fragment 0, enable bit 0 + * - if backoff needed, enable bit 0 + * - if burst (backoff not needed) disable bit 0 + * - if multicast, enable bit 1 + * - if PS-POLL frame, enable bit 2 + * - if in INDEPENDENT_BSS mode and zd1205_DestPowerSave, then enable + * bit 4 (FIXME: wtf) + * - if frag_len > RTS threshold, set bit 5 as long if it isnt + * multicast or mgt + * - if bit 5 is set, and we are in OFDM mode, unset bit 5 and set bit + * 7 + */ + + cs->control = 0; + + /* First fragment */ + if (WLAN_GET_SEQ_FRAG(le16_to_cpu(header->seq_ctl)) == 0) + cs->control |= ZD_CS_NEED_RANDOM_BACKOFF; + + /* Multicast */ + if (is_multicast_ether_addr(header->addr1)) + cs->control |= ZD_CS_MULTICAST; + + /* PS-POLL */ + if (stype == IEEE80211_STYPE_PSPOLL) + cs->control |= ZD_CS_PS_POLL_FRAME; + + if (!is_multicast_ether_addr(header->addr1) && + ftype != IEEE80211_FTYPE_MGMT && + tx_length > zd_netdev_ieee80211(mac->netdev)->rts) + { + /* FIXME: check the logic */ + if (ZD_CS_TYPE(cs->modulation) == ZD_CS_OFDM) { + /* 802.11g */ + cs->control |= ZD_CS_SELF_CTS; + } else { /* 802.11b */ + cs->control |= ZD_CS_RTS; + } + } + + /* FIXME: Management frame? */ +} + +static int fill_ctrlset(struct zd_mac *mac, + struct ieee80211_txb *txb, + int frag_num) +{ + int r; + struct sk_buff *skb = txb->fragments[frag_num]; + struct ieee80211_hdr_4addr *hdr = + (struct ieee80211_hdr_4addr *) skb->data; + unsigned int frag_len = skb->len + IEEE80211_FCS_LEN; + unsigned int next_frag_len; + unsigned int packet_length; + struct zd_ctrlset *cs = (struct zd_ctrlset *) + skb_push(skb, sizeof(struct zd_ctrlset)); + + if (frag_num+1 < txb->nr_frags) { + next_frag_len = txb->fragments[frag_num+1]->len + + IEEE80211_FCS_LEN; + } else { + next_frag_len = 0; + } + ZD_ASSERT(frag_len <= 0xffff); + ZD_ASSERT(next_frag_len <= 0xffff); + + cs_set_modulation(mac, cs, hdr); + + cs->tx_length = cpu_to_le16(frag_len); + + cs_set_control(mac, cs, hdr); + + packet_length = frag_len + sizeof(struct zd_ctrlset) + 10; + ZD_ASSERT(packet_length <= 0xffff); + /* ZD1211B: Computing the length difference this way, gives us + * flexibility to compute the packet length. + */ + cs->packet_length = cpu_to_le16(mac->chip.is_zd1211b ? + packet_length - frag_len : packet_length); + + /* + * CURRENT LENGTH: + * - transmit frame length in microseconds + * - seems to be derived from frame length + * - see Cal_Us_Service() in zdinlinef.h + * - if macp->bTxBurstEnable is enabled, then multiply by 4 + * - bTxBurstEnable is never set in the vendor driver + * + * SERVICE: + * - "for PLCP configuration" + * - always 0 except in some situations at 802.11b 11M + * - see line 53 of zdinlinef.h + */ + cs->service = 0; + r = zd_calc_tx_length_us(&cs->service, ZD_CS_RATE(cs->modulation), + le16_to_cpu(cs->tx_length)); + if (r < 0) + return r; + cs->current_length = cpu_to_le16(r); + + if (next_frag_len == 0) { + cs->next_frame_length = 0; + } else { + r = zd_calc_tx_length_us(NULL, ZD_CS_RATE(cs->modulation), + next_frag_len); + if (r < 0) + return r; + cs->next_frame_length = cpu_to_le16(r); + } + + return 0; +} + +static int zd_mac_tx(struct zd_mac *mac, struct ieee80211_txb *txb, int pri) +{ + int i, r; + + for (i = 0; i < txb->nr_frags; i++) { + struct sk_buff *skb = txb->fragments[i]; + + r = fill_ctrlset(mac, txb, i); + if (r) + return r; + r = zd_usb_tx(&mac->chip.usb, skb->data, skb->len); + if (r) + return r; + } + + /* FIXME: shouldn't this be handled by the upper layers? */ + mac->netdev->trans_start = jiffies; + + ieee80211_txb_free(txb); + return 0; +} + +struct zd_rt_hdr { + struct ieee80211_radiotap_header rt_hdr; + u8 rt_flags; + u16 rt_channel; + u16 rt_chbitmask; + u16 rt_rate; +}; + +static void fill_rt_header(void *buffer, struct zd_mac *mac, + const struct ieee80211_rx_stats *stats, + const struct rx_status *status) +{ + struct zd_rt_hdr *hdr = buffer; + + hdr->rt_hdr.it_version = PKTHDR_RADIOTAP_VERSION; + hdr->rt_hdr.it_pad = 0; + hdr->rt_hdr.it_len = cpu_to_le16(sizeof(struct zd_rt_hdr)); + hdr->rt_hdr.it_present = cpu_to_le32((1 << IEEE80211_RADIOTAP_FLAGS) | + (1 << IEEE80211_RADIOTAP_CHANNEL) | + (1 << IEEE80211_RADIOTAP_RATE)); + + hdr->rt_flags = 0; + if (status->decryption_type & (ZD_RX_WEP64|ZD_RX_WEP128|ZD_RX_WEP256)) + hdr->rt_flags |= IEEE80211_RADIOTAP_F_WEP; + + /* FIXME: 802.11a */ + hdr->rt_channel = cpu_to_le16(ieee80211chan2mhz( + _zd_chip_get_channel(&mac->chip))); + hdr->rt_chbitmask = cpu_to_le16(IEEE80211_CHAN_2GHZ | + ((status->frame_status & ZD_RX_FRAME_MODULATION_MASK) == + ZD_RX_OFDM ? IEEE80211_CHAN_OFDM : IEEE80211_CHAN_CCK)); + + hdr->rt_rate = stats->rate / 5; +} + +/* Returns 1 if the data packet is for us and 0 otherwise. */ +static int is_data_packet_for_us(struct ieee80211_device *ieee, + struct ieee80211_hdr_4addr *hdr) +{ + struct net_device *netdev = ieee->dev; + u16 fc = le16_to_cpu(hdr->frame_ctl); + + ZD_ASSERT(WLAN_FC_GET_TYPE(fc) == IEEE80211_FTYPE_DATA); + + switch (ieee->iw_mode) { + case IW_MODE_ADHOC: + if ((fc & (IEEE80211_FCTL_TODS|IEEE80211_FCTL_FROMDS)) != 0 || + memcmp(hdr->addr3, ieee->bssid, ETH_ALEN) != 0) + return 0; + break; + case IW_MODE_AUTO: + case IW_MODE_INFRA: + if ((fc & (IEEE80211_FCTL_TODS|IEEE80211_FCTL_FROMDS)) != + IEEE80211_FCTL_FROMDS || + memcmp(hdr->addr2, ieee->bssid, ETH_ALEN) != 0) + return 0; + break; + default: + ZD_ASSERT(ieee->iw_mode != IW_MODE_MONITOR); + return 0; + } + + return memcmp(hdr->addr1, netdev->dev_addr, ETH_ALEN) == 0 || + is_multicast_ether_addr(hdr->addr1) || + (netdev->flags & IFF_PROMISC); +} + +/* Filters receiving packets. If it returns 1 send it to ieee80211_rx, if 0 + * return. If an error is detected -EINVAL is returned. ieee80211_rx_mgt() is + * called here. + * + * It has been based on ieee80211_rx_any. + */ +static int filter_rx(struct ieee80211_device *ieee, + const u8 *buffer, unsigned int length, + struct ieee80211_rx_stats *stats) +{ + struct ieee80211_hdr_4addr *hdr; + u16 fc; + + if (ieee->iw_mode == IW_MODE_MONITOR) + return 1; + + hdr = (struct ieee80211_hdr_4addr *)buffer; + fc = le16_to_cpu(hdr->frame_ctl); + if ((fc & IEEE80211_FCTL_VERS) != 0) + return -EINVAL; + + switch (WLAN_FC_GET_TYPE(fc)) { + case IEEE80211_FTYPE_MGMT: + if (length < sizeof(struct ieee80211_hdr_3addr)) + return -EINVAL; + ieee80211_rx_mgt(ieee, hdr, stats); + return 0; + case IEEE80211_FTYPE_CTL: + /* Ignore invalid short buffers */ + return 0; + case IEEE80211_FTYPE_DATA: + if (length < sizeof(struct ieee80211_hdr_3addr)) + return -EINVAL; + return is_data_packet_for_us(ieee, hdr); + } + + return -EINVAL; +} + +static void update_qual_rssi(struct zd_mac *mac, u8 qual_percent, u8 rssi) +{ + unsigned long flags; + + spin_lock_irqsave(&mac->lock, flags); + mac->qual_average = (7 * mac->qual_average + qual_percent) / 8; + mac->rssi_average = (7 * mac->rssi_average + rssi) / 8; + spin_unlock_irqrestore(&mac->lock, flags); +} + +static int fill_rx_stats(struct ieee80211_rx_stats *stats, + const struct rx_status **pstatus, + struct zd_mac *mac, + const u8 *buffer, unsigned int length) +{ + const struct rx_status *status; + + *pstatus = status = zd_tail(buffer, length, sizeof(struct rx_status)); + if (status->frame_status & ZD_RX_ERROR) { + /* FIXME: update? */ + return -EINVAL; + } + memset(stats, 0, sizeof(struct ieee80211_rx_stats)); + stats->len = length - (ZD_PLCP_HEADER_SIZE + IEEE80211_FCS_LEN + + + sizeof(struct rx_status)); + /* FIXME: 802.11a */ + stats->freq = IEEE80211_24GHZ_BAND; + stats->received_channel = _zd_chip_get_channel(&mac->chip); + stats->rssi = zd_rx_strength_percent(status->signal_strength); + stats->signal = zd_rx_qual_percent(buffer, + length - sizeof(struct rx_status), + status); + stats->mask = IEEE80211_STATMASK_RSSI | IEEE80211_STATMASK_SIGNAL; + stats->rate = zd_rx_rate(buffer, status); + if (stats->rate) + stats->mask |= IEEE80211_STATMASK_RATE; + + update_qual_rssi(mac, stats->signal, stats->rssi); + return 0; +} + +int zd_mac_rx(struct zd_mac *mac, const u8 *buffer, unsigned int length) +{ + int r; + struct ieee80211_device *ieee = zd_mac_to_ieee80211(mac); + struct ieee80211_rx_stats stats; + const struct rx_status *status; + struct sk_buff *skb; + + if (length < ZD_PLCP_HEADER_SIZE + IEEE80211_1ADDR_LEN + + IEEE80211_FCS_LEN + sizeof(struct rx_status)) + return -EINVAL; + + r = fill_rx_stats(&stats, &status, mac, buffer, length); + if (r) + return r; + + length -= ZD_PLCP_HEADER_SIZE+IEEE80211_FCS_LEN+ + sizeof(struct rx_status); + buffer += ZD_PLCP_HEADER_SIZE; + + r = filter_rx(ieee, buffer, length, &stats); + if (r <= 0) + return r; + + skb = dev_alloc_skb(sizeof(struct zd_rt_hdr) + length); + if (!skb) + return -ENOMEM; + if (ieee->iw_mode == IW_MODE_MONITOR) + fill_rt_header(skb_put(skb, sizeof(struct zd_rt_hdr)), mac, + &stats, status); + memcpy(skb_put(skb, length), buffer, length); + + r = ieee80211_rx(ieee, skb, &stats); + if (!r) { + ZD_ASSERT(in_irq()); + dev_kfree_skb_irq(skb); + } + return 0; +} + +static int netdev_tx(struct ieee80211_txb *txb, struct net_device *netdev, + int pri) +{ + return zd_mac_tx(zd_netdev_mac(netdev), txb, pri); +} + +static void set_security(struct net_device *netdev, + struct ieee80211_security *sec) +{ + struct ieee80211_device *ieee = zd_netdev_ieee80211(netdev); + struct ieee80211_security *secinfo = &ieee->sec; + int keyidx; + + dev_dbg_f(zd_mac_dev(zd_netdev_mac(netdev)), "\n"); + + for (keyidx = 0; keyidxflags & (1<encode_alg[keyidx] = sec->encode_alg[keyidx]; + secinfo->key_sizes[keyidx] = sec->key_sizes[keyidx]; + memcpy(secinfo->keys[keyidx], sec->keys[keyidx], + SCM_KEY_LEN); + } + + if (sec->flags & SEC_ACTIVE_KEY) { + secinfo->active_key = sec->active_key; + dev_dbg_f(zd_mac_dev(zd_netdev_mac(netdev)), + " .active_key = %d\n", sec->active_key); + } + if (sec->flags & SEC_UNICAST_GROUP) { + secinfo->unicast_uses_group = sec->unicast_uses_group; + dev_dbg_f(zd_mac_dev(zd_netdev_mac(netdev)), + " .unicast_uses_group = %d\n", + sec->unicast_uses_group); + } + if (sec->flags & SEC_LEVEL) { + secinfo->level = sec->level; + dev_dbg_f(zd_mac_dev(zd_netdev_mac(netdev)), + " .level = %d\n", sec->level); + } + if (sec->flags & SEC_ENABLED) { + secinfo->enabled = sec->enabled; + dev_dbg_f(zd_mac_dev(zd_netdev_mac(netdev)), + " .enabled = %d\n", sec->enabled); + } + if (sec->flags & SEC_ENCRYPT) { + secinfo->encrypt = sec->encrypt; + dev_dbg_f(zd_mac_dev(zd_netdev_mac(netdev)), + " .encrypt = %d\n", sec->encrypt); + } + if (sec->flags & SEC_AUTH_MODE) { + secinfo->auth_mode = sec->auth_mode; + dev_dbg_f(zd_mac_dev(zd_netdev_mac(netdev)), + " .auth_mode = %d\n", sec->auth_mode); + } +} + +static void ieee_init(struct ieee80211_device *ieee) +{ + ieee->mode = IEEE_B | IEEE_G; + ieee->freq_band = IEEE80211_24GHZ_BAND; + ieee->modulation = IEEE80211_OFDM_MODULATION | IEEE80211_CCK_MODULATION; + ieee->tx_headroom = sizeof(struct zd_ctrlset); + ieee->set_security = set_security; + ieee->hard_start_xmit = netdev_tx; + + /* Software encryption/decryption for now */ + ieee->host_build_iv = 0; + ieee->host_encrypt = 1; + ieee->host_decrypt = 1; + + /* FIXME: default to managed mode, until ieee80211 and zd1211rw can + * correctly support AUTO */ + ieee->iw_mode = IW_MODE_INFRA; +} + +static void softmac_init(struct ieee80211softmac_device *sm) +{ + sm->set_channel = set_channel; +} + +struct iw_statistics *zd_mac_get_wireless_stats(struct net_device *ndev) +{ + struct zd_mac *mac = zd_netdev_mac(ndev); + struct iw_statistics *iw_stats = &mac->iw_stats; + + memset(iw_stats, 0, sizeof(struct iw_statistics)); + /* We are not setting the status, because ieee->state is not updated + * at all and this driver doesn't track authentication state. + */ + spin_lock_irq(&mac->lock); + iw_stats->qual.qual = mac->qual_average; + iw_stats->qual.level = mac->rssi_average; + iw_stats->qual.updated = IW_QUAL_QUAL_UPDATED|IW_QUAL_LEVEL_UPDATED| + IW_QUAL_NOISE_INVALID; + spin_unlock_irq(&mac->lock); + /* TODO: update counter */ + return iw_stats; +} + +#ifdef DEBUG +static const char* decryption_types[] = { + [ZD_RX_NO_WEP] = "none", + [ZD_RX_WEP64] = "WEP64", + [ZD_RX_TKIP] = "TKIP", + [ZD_RX_AES] = "AES", + [ZD_RX_WEP128] = "WEP128", + [ZD_RX_WEP256] = "WEP256", +}; + +static const char *decryption_type_string(u8 type) +{ + const char *s; + + if (type < ARRAY_SIZE(decryption_types)) { + s = decryption_types[type]; + } else { + s = NULL; + } + return s ? s : "unknown"; +} + +static int is_ofdm(u8 frame_status) +{ + return (frame_status & ZD_RX_OFDM); +} + +void zd_dump_rx_status(const struct rx_status *status) +{ + const char* modulation; + u8 quality; + + if (is_ofdm(status->frame_status)) { + modulation = "ofdm"; + quality = status->signal_quality_ofdm; + } else { + modulation = "cck"; + quality = status->signal_quality_cck; + } + pr_debug("rx status %s strength %#04x qual %#04x decryption %s\n", + modulation, status->signal_strength, quality, + decryption_type_string(status->decryption_type)); + if (status->frame_status & ZD_RX_ERROR) { + pr_debug("rx error %s%s%s%s%s%s\n", + (status->frame_status & ZD_RX_TIMEOUT_ERROR) ? + "timeout " : "", + (status->frame_status & ZD_RX_FIFO_OVERRUN_ERROR) ? + "fifo " : "", + (status->frame_status & ZD_RX_DECRYPTION_ERROR) ? + "decryption " : "", + (status->frame_status & ZD_RX_CRC32_ERROR) ? + "crc32 " : "", + (status->frame_status & ZD_RX_NO_ADDR1_MATCH_ERROR) ? + "addr1 " : "", + (status->frame_status & ZD_RX_CRC16_ERROR) ? + "crc16" : ""); + } +} +#endif /* DEBUG */ diff --git a/drivers/net/wireless/zd1211rw/zd_mac.h b/drivers/net/wireless/zd1211rw/zd_mac.h new file mode 100644 index 00000000000..71e382c589e --- /dev/null +++ b/drivers/net/wireless/zd1211rw/zd_mac.h @@ -0,0 +1,190 @@ +/* zd_mac.c + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#ifndef _ZD_MAC_H +#define _ZD_MAC_H + +#include +#include +#include +#include + +#include "zd_chip.h" +#include "zd_netdev.h" + +struct zd_ctrlset { + u8 modulation; + __le16 tx_length; + u8 control; + /* stores only the difference to tx_length on ZD1211B */ + __le16 packet_length; + __le16 current_length; + u8 service; + __le16 next_frame_length; +} __attribute__((packed)); + +#define ZD_CS_RESERVED_SIZE 25 + +/* zd_crtlset field modulation */ +#define ZD_CS_RATE_MASK 0x0f +#define ZD_CS_TYPE_MASK 0x10 +#define ZD_CS_RATE(modulation) ((modulation) & ZD_CS_RATE_MASK) +#define ZD_CS_TYPE(modulation) ((modulation) & ZD_CS_TYPE_MASK) + +#define ZD_CS_CCK 0x00 +#define ZD_CS_OFDM 0x10 + +#define ZD_CS_CCK_RATE_1M 0x00 +#define ZD_CS_CCK_RATE_2M 0x01 +#define ZD_CS_CCK_RATE_5_5M 0x02 +#define ZD_CS_CCK_RATE_11M 0x03 +/* The rates for OFDM are encoded as in the PLCP header. Use ZD_OFDM_RATE_*. + */ + +/* bit 5 is preamble (when in CCK mode), or a/g selection (when in OFDM mode) */ +#define ZD_CS_CCK_PREA_LONG 0x00 +#define ZD_CS_CCK_PREA_SHORT 0x20 +#define ZD_CS_OFDM_MODE_11G 0x00 +#define ZD_CS_OFDM_MODE_11A 0x20 + +/* zd_ctrlset control field */ +#define ZD_CS_NEED_RANDOM_BACKOFF 0x01 +#define ZD_CS_MULTICAST 0x02 + +#define ZD_CS_FRAME_TYPE_MASK 0x0c +#define ZD_CS_DATA_FRAME 0x00 +#define ZD_CS_PS_POLL_FRAME 0x04 +#define ZD_CS_MANAGEMENT_FRAME 0x08 +#define ZD_CS_NO_SEQUENCE_CTL_FRAME 0x0c + +#define ZD_CS_WAKE_DESTINATION 0x10 +#define ZD_CS_RTS 0x20 +#define ZD_CS_ENCRYPT 0x40 +#define ZD_CS_SELF_CTS 0x80 + +/* Incoming frames are prepended by a PLCP header */ +#define ZD_PLCP_HEADER_SIZE 5 + +struct rx_length_info { + __le16 length[3]; + __le16 tag; +} __attribute__((packed)); + +#define RX_LENGTH_INFO_TAG 0x697e + +struct rx_status { + /* rssi */ + u8 signal_strength; + u8 signal_quality_cck; + u8 signal_quality_ofdm; + u8 decryption_type; + u8 frame_status; +} __attribute__((packed)); + +/* rx_status field decryption_type */ +#define ZD_RX_NO_WEP 0 +#define ZD_RX_WEP64 1 +#define ZD_RX_TKIP 2 +#define ZD_RX_AES 4 +#define ZD_RX_WEP128 5 +#define ZD_RX_WEP256 6 + +/* rx_status field frame_status */ +#define ZD_RX_FRAME_MODULATION_MASK 0x01 +#define ZD_RX_CCK 0x00 +#define ZD_RX_OFDM 0x01 + +#define ZD_RX_TIMEOUT_ERROR 0x02 +#define ZD_RX_FIFO_OVERRUN_ERROR 0x04 +#define ZD_RX_DECRYPTION_ERROR 0x08 +#define ZD_RX_CRC32_ERROR 0x10 +#define ZD_RX_NO_ADDR1_MATCH_ERROR 0x20 +#define ZD_RX_CRC16_ERROR 0x40 +#define ZD_RX_ERROR 0x80 + +enum mac_flags { + MAC_FIXED_CHANNEL = 0x01, +}; + +struct zd_mac { + struct net_device *netdev; + struct zd_chip chip; + spinlock_t lock; + /* Unlocked reading possible */ + struct iw_statistics iw_stats; + u8 qual_average; + u8 rssi_average; + u8 regdomain; + u8 default_regdomain; + u8 requested_channel; +}; + +static inline struct ieee80211_device *zd_mac_to_ieee80211(struct zd_mac *mac) +{ + return zd_netdev_ieee80211(mac->netdev); +} + +static inline struct zd_mac *zd_netdev_mac(struct net_device *netdev) +{ + return ieee80211softmac_priv(netdev); +} + +static inline struct zd_mac *zd_chip_to_mac(struct zd_chip *chip) +{ + return container_of(chip, struct zd_mac, chip); +} + +static inline struct zd_mac *zd_usb_to_mac(struct zd_usb *usb) +{ + return zd_chip_to_mac(zd_usb_to_chip(usb)); +} + +#define zd_mac_dev(mac) (zd_chip_dev(&(mac)->chip)) + +int zd_mac_init(struct zd_mac *mac, + struct net_device *netdev, + struct usb_interface *intf); +void zd_mac_clear(struct zd_mac *mac); + +int zd_mac_init_hw(struct zd_mac *mac, u8 device_type); + +int zd_mac_open(struct net_device *netdev); +int zd_mac_stop(struct net_device *netdev); +int zd_mac_set_mac_address(struct net_device *dev, void *p); + +int zd_mac_rx(struct zd_mac *mac, const u8 *buffer, unsigned int length); + +int zd_mac_set_regdomain(struct zd_mac *zd_mac, u8 regdomain); +u8 zd_mac_get_regdomain(struct zd_mac *zd_mac); + +int zd_mac_request_channel(struct zd_mac *mac, u8 channel); +int zd_mac_get_channel(struct zd_mac *mac, u8 *channel, u8 *flags); + +int zd_mac_set_mode(struct zd_mac *mac, u32 mode); +int zd_mac_get_mode(struct zd_mac *mac, u32 *mode); + +int zd_mac_get_range(struct zd_mac *mac, struct iw_range *range); + +struct iw_statistics *zd_mac_get_wireless_stats(struct net_device *ndev); + +#ifdef DEBUG +void zd_dump_rx_status(const struct rx_status *status); +#else +#define zd_dump_rx_status(status) +#endif /* DEBUG */ + +#endif /* _ZD_MAC_H */ diff --git a/drivers/net/wireless/zd1211rw/zd_netdev.c b/drivers/net/wireless/zd1211rw/zd_netdev.c new file mode 100644 index 00000000000..9df232c2c86 --- /dev/null +++ b/drivers/net/wireless/zd1211rw/zd_netdev.c @@ -0,0 +1,267 @@ +/* zd_netdev.c + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#include +#include +#include +#include +#include +#include +#include + +#include "zd_def.h" +#include "zd_netdev.h" +#include "zd_mac.h" +#include "zd_ieee80211.h" + +/* Region 0 means reset regdomain to default. */ +static int zd_set_regdomain(struct net_device *netdev, + struct iw_request_info *info, + union iwreq_data *req, char *extra) +{ + const u8 *regdomain = (u8 *)req; + return zd_mac_set_regdomain(zd_netdev_mac(netdev), *regdomain); +} + +static int zd_get_regdomain(struct net_device *netdev, + struct iw_request_info *info, + union iwreq_data *req, char *extra) +{ + u8 *regdomain = (u8 *)req; + if (!regdomain) + return -EINVAL; + *regdomain = zd_mac_get_regdomain(zd_netdev_mac(netdev)); + return 0; +} + +static const struct iw_priv_args zd_priv_args[] = { + { + .cmd = ZD_PRIV_SET_REGDOMAIN, + .set_args = IW_PRIV_TYPE_BYTE | IW_PRIV_SIZE_FIXED | 1, + .name = "set_regdomain", + }, + { + .cmd = ZD_PRIV_GET_REGDOMAIN, + .get_args = IW_PRIV_TYPE_BYTE | IW_PRIV_SIZE_FIXED | 1, + .name = "get_regdomain", + }, +}; + +#define PRIV_OFFSET(x) [(x)-SIOCIWFIRSTPRIV] + +static const iw_handler zd_priv_handler[] = { + PRIV_OFFSET(ZD_PRIV_SET_REGDOMAIN) = zd_set_regdomain, + PRIV_OFFSET(ZD_PRIV_GET_REGDOMAIN) = zd_get_regdomain, +}; + +static int iw_get_name(struct net_device *netdev, + struct iw_request_info *info, + union iwreq_data *req, char *extra) +{ + /* FIXME: check whether 802.11a will also supported, add also + * zd1211B, if we support it. + */ + strlcpy(req->name, "802.11g zd1211", IFNAMSIZ); + return 0; +} + +static int iw_set_freq(struct net_device *netdev, + struct iw_request_info *info, + union iwreq_data *req, char *extra) +{ + int r; + struct zd_mac *mac = zd_netdev_mac(netdev); + struct iw_freq *freq = &req->freq; + u8 channel; + + r = zd_find_channel(&channel, freq); + if (r < 0) + return r; + r = zd_mac_request_channel(mac, channel); + return r; +} + +static int iw_get_freq(struct net_device *netdev, + struct iw_request_info *info, + union iwreq_data *req, char *extra) +{ + int r; + struct zd_mac *mac = zd_netdev_mac(netdev); + struct iw_freq *freq = &req->freq; + u8 channel; + u8 flags; + + r = zd_mac_get_channel(mac, &channel, &flags); + if (r) + return r; + + freq->flags = (flags & MAC_FIXED_CHANNEL) ? + IW_FREQ_FIXED : IW_FREQ_AUTO; + dev_dbg_f(zd_mac_dev(mac), "channel %s\n", + (flags & MAC_FIXED_CHANNEL) ? "fixed" : "auto"); + return zd_channel_to_freq(freq, channel); +} + +static int iw_set_mode(struct net_device *netdev, + struct iw_request_info *info, + union iwreq_data *req, char *extra) +{ + return zd_mac_set_mode(zd_netdev_mac(netdev), req->mode); +} + +static int iw_get_mode(struct net_device *netdev, + struct iw_request_info *info, + union iwreq_data *req, char *extra) +{ + return zd_mac_get_mode(zd_netdev_mac(netdev), &req->mode); +} + +static int iw_get_range(struct net_device *netdev, + struct iw_request_info *info, + union iwreq_data *req, char *extra) +{ + struct iw_range *range = (struct iw_range *)extra; + + dev_dbg_f(zd_mac_dev(zd_netdev_mac(netdev)), "\n"); + req->data.length = sizeof(*range); + return zd_mac_get_range(zd_netdev_mac(netdev), range); +} + +static int iw_set_encode(struct net_device *netdev, + struct iw_request_info *info, + union iwreq_data *data, + char *extra) +{ + return ieee80211_wx_set_encode(zd_netdev_ieee80211(netdev), info, + data, extra); +} + +static int iw_get_encode(struct net_device *netdev, + struct iw_request_info *info, + union iwreq_data *data, + char *extra) +{ + return ieee80211_wx_get_encode(zd_netdev_ieee80211(netdev), info, + data, extra); +} + +static int iw_set_encodeext(struct net_device *netdev, + struct iw_request_info *info, + union iwreq_data *data, + char *extra) +{ + return ieee80211_wx_set_encodeext(zd_netdev_ieee80211(netdev), info, + data, extra); +} + +static int iw_get_encodeext(struct net_device *netdev, + struct iw_request_info *info, + union iwreq_data *data, + char *extra) +{ + return ieee80211_wx_get_encodeext(zd_netdev_ieee80211(netdev), info, + data, extra); +} + +#define WX(x) [(x)-SIOCIWFIRST] + +static const iw_handler zd_standard_iw_handlers[] = { + WX(SIOCGIWNAME) = iw_get_name, + WX(SIOCSIWFREQ) = iw_set_freq, + WX(SIOCGIWFREQ) = iw_get_freq, + WX(SIOCSIWMODE) = iw_set_mode, + WX(SIOCGIWMODE) = iw_get_mode, + WX(SIOCGIWRANGE) = iw_get_range, + WX(SIOCSIWENCODE) = iw_set_encode, + WX(SIOCGIWENCODE) = iw_get_encode, + WX(SIOCSIWENCODEEXT) = iw_set_encodeext, + WX(SIOCGIWENCODEEXT) = iw_get_encodeext, + WX(SIOCSIWAUTH) = ieee80211_wx_set_auth, + WX(SIOCGIWAUTH) = ieee80211_wx_get_auth, + WX(SIOCSIWSCAN) = ieee80211softmac_wx_trigger_scan, + WX(SIOCGIWSCAN) = ieee80211softmac_wx_get_scan_results, + WX(SIOCSIWESSID) = ieee80211softmac_wx_set_essid, + WX(SIOCGIWESSID) = ieee80211softmac_wx_get_essid, + WX(SIOCSIWAP) = ieee80211softmac_wx_set_wap, + WX(SIOCGIWAP) = ieee80211softmac_wx_get_wap, + WX(SIOCSIWRATE) = ieee80211softmac_wx_set_rate, + WX(SIOCGIWRATE) = ieee80211softmac_wx_get_rate, + WX(SIOCSIWGENIE) = ieee80211softmac_wx_set_genie, + WX(SIOCGIWGENIE) = ieee80211softmac_wx_get_genie, + WX(SIOCSIWMLME) = ieee80211softmac_wx_set_mlme, +}; + +static const struct iw_handler_def iw_handler_def = { + .standard = zd_standard_iw_handlers, + .num_standard = ARRAY_SIZE(zd_standard_iw_handlers), + .private = zd_priv_handler, + .num_private = ARRAY_SIZE(zd_priv_handler), + .private_args = zd_priv_args, + .num_private_args = ARRAY_SIZE(zd_priv_args), + .get_wireless_stats = zd_mac_get_wireless_stats, +}; + +struct net_device *zd_netdev_alloc(struct usb_interface *intf) +{ + int r; + struct net_device *netdev; + struct zd_mac *mac; + + netdev = alloc_ieee80211softmac(sizeof(struct zd_mac)); + if (!netdev) { + dev_dbg_f(&intf->dev, "out of memory\n"); + return NULL; + } + + mac = zd_netdev_mac(netdev); + r = zd_mac_init(mac, netdev, intf); + if (r) { + usb_set_intfdata(intf, NULL); + free_ieee80211(netdev); + return NULL; + } + + SET_MODULE_OWNER(netdev); + SET_NETDEV_DEV(netdev, &intf->dev); + + dev_dbg_f(&intf->dev, "netdev->flags %#06hx\n", netdev->flags); + dev_dbg_f(&intf->dev, "netdev->features %#010lx\n", netdev->features); + + netdev->open = zd_mac_open; + netdev->stop = zd_mac_stop; + /* netdev->get_stats = */ + /* netdev->set_multicast_list = */ + netdev->set_mac_address = zd_mac_set_mac_address; + netdev->wireless_handlers = &iw_handler_def; + /* netdev->ethtool_ops = */ + + return netdev; +} + +void zd_netdev_free(struct net_device *netdev) +{ + if (!netdev) + return; + + zd_mac_clear(zd_netdev_mac(netdev)); + free_ieee80211(netdev); +} + +void zd_netdev_disconnect(struct net_device *netdev) +{ + unregister_netdev(netdev); +} diff --git a/drivers/net/wireless/zd1211rw/zd_netdev.h b/drivers/net/wireless/zd1211rw/zd_netdev.h new file mode 100644 index 00000000000..374a957073c --- /dev/null +++ b/drivers/net/wireless/zd1211rw/zd_netdev.h @@ -0,0 +1,45 @@ +/* zd_netdev.h: Header for net device related functions. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#ifndef _ZD_NETDEV_H +#define _ZD_NETDEV_H + +#include +#include +#include + +#define ZD_PRIV_SET_REGDOMAIN (SIOCIWFIRSTPRIV) +#define ZD_PRIV_GET_REGDOMAIN (SIOCIWFIRSTPRIV+1) + +static inline struct ieee80211_device *zd_netdev_ieee80211( + struct net_device *ndev) +{ + return netdev_priv(ndev); +} + +static inline struct net_device *zd_ieee80211_to_netdev( + struct ieee80211_device *ieee) +{ + return ieee->dev; +} + +struct net_device *zd_netdev_alloc(struct usb_interface *intf); +void zd_netdev_free(struct net_device *netdev); + +void zd_netdev_disconnect(struct net_device *netdev); + +#endif /* _ZD_NETDEV_H */ diff --git a/drivers/net/wireless/zd1211rw/zd_rf.c b/drivers/net/wireless/zd1211rw/zd_rf.c new file mode 100644 index 00000000000..d3770d2c61b --- /dev/null +++ b/drivers/net/wireless/zd1211rw/zd_rf.c @@ -0,0 +1,151 @@ +/* zd_rf.c + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#include +#include + +#include "zd_def.h" +#include "zd_rf.h" +#include "zd_ieee80211.h" +#include "zd_chip.h" + +static const char *rfs[] = { + [0] = "unknown RF0", + [1] = "unknown RF1", + [UW2451_RF] = "UW2451_RF", + [UCHIP_RF] = "UCHIP_RF", + [AL2230_RF] = "AL2230_RF", + [AL7230B_RF] = "AL7230B_RF", + [THETA_RF] = "THETA_RF", + [AL2210_RF] = "AL2210_RF", + [MAXIM_NEW_RF] = "MAXIM_NEW_RF", + [UW2453_RF] = "UW2453_RF", + [AL2230S_RF] = "AL2230S_RF", + [RALINK_RF] = "RALINK_RF", + [INTERSIL_RF] = "INTERSIL_RF", + [RF2959_RF] = "RF2959_RF", + [MAXIM_NEW2_RF] = "MAXIM_NEW2_RF", + [PHILIPS_RF] = "PHILIPS_RF", +}; + +const char *zd_rf_name(u8 type) +{ + if (type & 0xf0) + type = 0; + return rfs[type]; +} + +void zd_rf_init(struct zd_rf *rf) +{ + memset(rf, 0, sizeof(*rf)); +} + +void zd_rf_clear(struct zd_rf *rf) +{ + memset(rf, 0, sizeof(*rf)); +} + +int zd_rf_init_hw(struct zd_rf *rf, u8 type) +{ + int r, t; + struct zd_chip *chip = zd_rf_to_chip(rf); + + ZD_ASSERT(mutex_is_locked(&chip->mutex)); + switch (type) { + case RF2959_RF: + r = zd_rf_init_rf2959(rf); + if (r) + return r; + break; + case AL2230_RF: + r = zd_rf_init_al2230(rf); + if (r) + return r; + break; + default: + dev_err(zd_chip_dev(chip), + "RF %s %#x is not supported\n", zd_rf_name(type), type); + rf->type = 0; + return -ENODEV; + } + + rf->type = type; + + r = zd_chip_lock_phy_regs(chip); + if (r) + return r; + t = rf->init_hw(rf); + r = zd_chip_unlock_phy_regs(chip); + if (t) + r = t; + return r; +} + +int zd_rf_scnprint_id(struct zd_rf *rf, char *buffer, size_t size) +{ + return scnprintf(buffer, size, "%s", zd_rf_name(rf->type)); +} + +int zd_rf_set_channel(struct zd_rf *rf, u8 channel) +{ + int r; + + ZD_ASSERT(mutex_is_locked(&zd_rf_to_chip(rf)->mutex)); + if (channel < MIN_CHANNEL24) + return -EINVAL; + if (channel > MAX_CHANNEL24) + return -EINVAL; + dev_dbg_f(zd_chip_dev(zd_rf_to_chip(rf)), "channel: %d\n", channel); + + r = rf->set_channel(rf, channel); + if (r >= 0) + rf->channel = channel; + return r; +} + +int zd_switch_radio_on(struct zd_rf *rf) +{ + int r, t; + struct zd_chip *chip = zd_rf_to_chip(rf); + + ZD_ASSERT(mutex_is_locked(&chip->mutex)); + r = zd_chip_lock_phy_regs(chip); + if (r) + return r; + t = rf->switch_radio_on(rf); + r = zd_chip_unlock_phy_regs(chip); + if (t) + r = t; + return r; +} + +int zd_switch_radio_off(struct zd_rf *rf) +{ + int r, t; + struct zd_chip *chip = zd_rf_to_chip(rf); + + /* TODO: move phy regs handling to zd_chip */ + ZD_ASSERT(mutex_is_locked(&chip->mutex)); + r = zd_chip_lock_phy_regs(chip); + if (r) + return r; + t = rf->switch_radio_off(rf); + r = zd_chip_unlock_phy_regs(chip); + if (t) + r = t; + return r; +} diff --git a/drivers/net/wireless/zd1211rw/zd_rf.h b/drivers/net/wireless/zd1211rw/zd_rf.h new file mode 100644 index 00000000000..ea30f693fcc --- /dev/null +++ b/drivers/net/wireless/zd1211rw/zd_rf.h @@ -0,0 +1,82 @@ +/* zd_rf.h + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#ifndef _ZD_RF_H +#define _ZD_RF_H + +#include "zd_types.h" + +#define UW2451_RF 0x2 +#define UCHIP_RF 0x3 +#define AL2230_RF 0x4 +#define AL7230B_RF 0x5 /* a,b,g */ +#define THETA_RF 0x6 +#define AL2210_RF 0x7 +#define MAXIM_NEW_RF 0x8 +#define UW2453_RF 0x9 +#define AL2230S_RF 0xa +#define RALINK_RF 0xb +#define INTERSIL_RF 0xc +#define RF2959_RF 0xd +#define MAXIM_NEW2_RF 0xe +#define PHILIPS_RF 0xf + +#define RF_CHANNEL(ch) [(ch)-1] + +/* Provides functions of the RF transceiver. */ + +enum { + RF_REG_BITS = 6, + RF_VALUE_BITS = 18, + RF_RV_BITS = RF_REG_BITS + RF_VALUE_BITS, +}; + +struct zd_rf { + u8 type; + + u8 channel; + /* + * Whether this RF should patch the 6M band edge + * (assuming E2P_POD agrees) + */ + u8 patch_6m_band_edge:1; + + /* RF-specific functions */ + int (*init_hw)(struct zd_rf *rf); + int (*set_channel)(struct zd_rf *rf, u8 channel); + int (*switch_radio_on)(struct zd_rf *rf); + int (*switch_radio_off)(struct zd_rf *rf); +}; + +const char *zd_rf_name(u8 type); +void zd_rf_init(struct zd_rf *rf); +void zd_rf_clear(struct zd_rf *rf); +int zd_rf_init_hw(struct zd_rf *rf, u8 type); + +int zd_rf_scnprint_id(struct zd_rf *rf, char *buffer, size_t size); + +int zd_rf_set_channel(struct zd_rf *rf, u8 channel); + +int zd_switch_radio_on(struct zd_rf *rf); +int zd_switch_radio_off(struct zd_rf *rf); + +/* Functions for individual RF chips */ + +int zd_rf_init_rf2959(struct zd_rf *rf); +int zd_rf_init_al2230(struct zd_rf *rf); + +#endif /* _ZD_RF_H */ diff --git a/drivers/net/wireless/zd1211rw/zd_rf_al2230.c b/drivers/net/wireless/zd1211rw/zd_rf_al2230.c new file mode 100644 index 00000000000..0948b25f660 --- /dev/null +++ b/drivers/net/wireless/zd1211rw/zd_rf_al2230.c @@ -0,0 +1,308 @@ +/* zd_rf_al2230.c: Functions for the AL2230 RF controller + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#include + +#include "zd_rf.h" +#include "zd_usb.h" +#include "zd_chip.h" + +static const u32 al2230_table[][3] = { + RF_CHANNEL( 1) = { 0x03f790, 0x033331, 0x00000d, }, + RF_CHANNEL( 2) = { 0x03f790, 0x0b3331, 0x00000d, }, + RF_CHANNEL( 3) = { 0x03e790, 0x033331, 0x00000d, }, + RF_CHANNEL( 4) = { 0x03e790, 0x0b3331, 0x00000d, }, + RF_CHANNEL( 5) = { 0x03f7a0, 0x033331, 0x00000d, }, + RF_CHANNEL( 6) = { 0x03f7a0, 0x0b3331, 0x00000d, }, + RF_CHANNEL( 7) = { 0x03e7a0, 0x033331, 0x00000d, }, + RF_CHANNEL( 8) = { 0x03e7a0, 0x0b3331, 0x00000d, }, + RF_CHANNEL( 9) = { 0x03f7b0, 0x033331, 0x00000d, }, + RF_CHANNEL(10) = { 0x03f7b0, 0x0b3331, 0x00000d, }, + RF_CHANNEL(11) = { 0x03e7b0, 0x033331, 0x00000d, }, + RF_CHANNEL(12) = { 0x03e7b0, 0x0b3331, 0x00000d, }, + RF_CHANNEL(13) = { 0x03f7c0, 0x033331, 0x00000d, }, + RF_CHANNEL(14) = { 0x03e7c0, 0x066661, 0x00000d, }, +}; + +static int zd1211_al2230_init_hw(struct zd_rf *rf) +{ + int r; + struct zd_chip *chip = zd_rf_to_chip(rf); + + static const struct zd_ioreq16 ioreqs[] = { + { CR15, 0x20 }, { CR23, 0x40 }, { CR24, 0x20 }, + { CR26, 0x11 }, { CR28, 0x3e }, { CR29, 0x00 }, + { CR44, 0x33 }, { CR106, 0x2a }, { CR107, 0x1a }, + { CR109, 0x09 }, { CR110, 0x27 }, { CR111, 0x2b }, + { CR112, 0x2b }, { CR119, 0x0a }, { CR10, 0x89 }, + /* for newest (3rd cut) AL2300 */ + { CR17, 0x28 }, + { CR26, 0x93 }, { CR34, 0x30 }, + /* for newest (3rd cut) AL2300 */ + { CR35, 0x3e }, + { CR41, 0x24 }, { CR44, 0x32 }, + /* for newest (3rd cut) AL2300 */ + { CR46, 0x96 }, + { CR47, 0x1e }, { CR79, 0x58 }, { CR80, 0x30 }, + { CR81, 0x30 }, { CR87, 0x0a }, { CR89, 0x04 }, + { CR92, 0x0a }, { CR99, 0x28 }, { CR100, 0x00 }, + { CR101, 0x13 }, { CR102, 0x27 }, { CR106, 0x24 }, + { CR107, 0x2a }, { CR109, 0x09 }, { CR110, 0x13 }, + { CR111, 0x1f }, { CR112, 0x1f }, { CR113, 0x27 }, + { CR114, 0x27 }, + /* for newest (3rd cut) AL2300 */ + { CR115, 0x24 }, + { CR116, 0x24 }, { CR117, 0xf4 }, { CR118, 0xfc }, + { CR119, 0x10 }, { CR120, 0x4f }, { CR121, 0x77 }, + { CR122, 0xe0 }, { CR137, 0x88 }, { CR252, 0xff }, + { CR253, 0xff }, + + /* These following happen separately in the vendor driver */ + { }, + + /* shdnb(PLL_ON)=0 */ + { CR251, 0x2f }, + /* shdnb(PLL_ON)=1 */ + { CR251, 0x3f }, + { CR138, 0x28 }, { CR203, 0x06 }, + }; + + static const u32 rv[] = { + /* Channel 1 */ + 0x03f790, + 0x033331, + 0x00000d, + + 0x0b3331, + 0x03b812, + 0x00fff3, + 0x000da4, + 0x0f4dc5, /* fix freq shift, 0x04edc5 */ + 0x0805b6, + 0x011687, + 0x000688, + 0x0403b9, /* external control TX power (CR31) */ + 0x00dbba, + 0x00099b, + 0x0bdffc, + 0x00000d, + 0x00500f, + + /* These writes happen separately in the vendor driver */ + 0x00d00f, + 0x004c0f, + 0x00540f, + 0x00700f, + 0x00500f, + }; + + r = zd_iowrite16a_locked(chip, ioreqs, ARRAY_SIZE(ioreqs)); + if (r) + return r; + + r = zd_rfwritev_locked(chip, rv, ARRAY_SIZE(rv), RF_RV_BITS); + if (r) + return r; + + return 0; +} + +static int zd1211b_al2230_init_hw(struct zd_rf *rf) +{ + int r; + struct zd_chip *chip = zd_rf_to_chip(rf); + + static const struct zd_ioreq16 ioreqs1[] = { + { CR10, 0x89 }, { CR15, 0x20 }, + { CR17, 0x2B }, /* for newest(3rd cut) AL2230 */ + { CR23, 0x40 }, { CR24, 0x20 }, { CR26, 0x93 }, + { CR28, 0x3e }, { CR29, 0x00 }, + { CR33, 0x28 }, /* 5621 */ + { CR34, 0x30 }, + { CR35, 0x3e }, /* for newest(3rd cut) AL2230 */ + { CR41, 0x24 }, { CR44, 0x32 }, + { CR46, 0x99 }, /* for newest(3rd cut) AL2230 */ + { CR47, 0x1e }, + + /* ZD1211B 05.06.10 */ + { CR48, 0x00 }, { CR49, 0x00 }, { CR51, 0x01 }, + { CR52, 0x80 }, { CR53, 0x7e }, { CR65, 0x00 }, + { CR66, 0x00 }, { CR67, 0x00 }, { CR68, 0x00 }, + { CR69, 0x28 }, + + { CR79, 0x58 }, { CR80, 0x30 }, { CR81, 0x30 }, + { CR87, 0x0a }, { CR89, 0x04 }, + { CR91, 0x00 }, /* 5621 */ + { CR92, 0x0a }, + { CR98, 0x8d }, /* 4804, for 1212 new algorithm */ + { CR99, 0x00 }, /* 5621 */ + { CR101, 0x13 }, { CR102, 0x27 }, + { CR106, 0x24 }, /* for newest(3rd cut) AL2230 */ + { CR107, 0x2a }, + { CR109, 0x13 }, /* 4804, for 1212 new algorithm */ + { CR110, 0x1f }, /* 4804, for 1212 new algorithm */ + { CR111, 0x1f }, { CR112, 0x1f }, { CR113, 0x27 }, + { CR114, 0x27 }, + { CR115, 0x26 }, /* 24->26 at 4902 for newest(3rd cut) AL2230 */ + { CR116, 0x24 }, + { CR117, 0xfa }, /* for 1211b */ + { CR118, 0xfa }, /* for 1211b */ + { CR119, 0x10 }, + { CR120, 0x4f }, + { CR121, 0x6c }, /* for 1211b */ + { CR122, 0xfc }, /* E0->FC at 4902 */ + { CR123, 0x57 }, /* 5623 */ + { CR125, 0xad }, /* 4804, for 1212 new algorithm */ + { CR126, 0x6c }, /* 5614 */ + { CR127, 0x03 }, /* 4804, for 1212 new algorithm */ + { CR137, 0x50 }, /* 5614 */ + { CR138, 0xa8 }, + { CR144, 0xac }, /* 5621 */ + { CR150, 0x0d }, { CR252, 0x00 }, { CR253, 0x00 }, + }; + + static const u32 rv1[] = { + /* channel 1 */ + 0x03f790, + 0x033331, + 0x00000d, + + 0x0b3331, + 0x03b812, + 0x00fff3, + 0x0005a4, + 0x0f4dc5, /* fix freq shift 0x044dc5 */ + 0x0805b6, + 0x0146c7, + 0x000688, + 0x0403b9, /* External control TX power (CR31) */ + 0x00dbba, + 0x00099b, + 0x0bdffc, + 0x00000d, + 0x00580f, + }; + + static const struct zd_ioreq16 ioreqs2[] = { + { CR47, 0x1e }, { CR_RFCFG, 0x03 }, + }; + + static const u32 rv2[] = { + 0x00880f, + 0x00080f, + }; + + static const struct zd_ioreq16 ioreqs3[] = { + { CR_RFCFG, 0x00 }, { CR47, 0x1e }, { CR251, 0x7f }, + }; + + static const u32 rv3[] = { + 0x00d80f, + 0x00780f, + 0x00580f, + }; + + static const struct zd_ioreq16 ioreqs4[] = { + { CR138, 0x28 }, { CR203, 0x06 }, + }; + + r = zd_iowrite16a_locked(chip, ioreqs1, ARRAY_SIZE(ioreqs1)); + if (r) + return r; + r = zd_rfwritev_locked(chip, rv1, ARRAY_SIZE(rv1), RF_RV_BITS); + if (r) + return r; + r = zd_iowrite16a_locked(chip, ioreqs2, ARRAY_SIZE(ioreqs2)); + if (r) + return r; + r = zd_rfwritev_locked(chip, rv2, ARRAY_SIZE(rv2), RF_RV_BITS); + if (r) + return r; + r = zd_iowrite16a_locked(chip, ioreqs3, ARRAY_SIZE(ioreqs3)); + if (r) + return r; + r = zd_rfwritev_locked(chip, rv3, ARRAY_SIZE(rv3), RF_RV_BITS); + if (r) + return r; + return zd_iowrite16a_locked(chip, ioreqs4, ARRAY_SIZE(ioreqs4)); +} + +static int al2230_set_channel(struct zd_rf *rf, u8 channel) +{ + int r; + const u32 *rv = al2230_table[channel-1]; + struct zd_chip *chip = zd_rf_to_chip(rf); + static const struct zd_ioreq16 ioreqs[] = { + { CR138, 0x28 }, + { CR203, 0x06 }, + }; + + r = zd_rfwritev_locked(chip, rv, 3, RF_RV_BITS); + if (r) + return r; + return zd_iowrite16a_locked(chip, ioreqs, ARRAY_SIZE(ioreqs)); +} + +static int zd1211_al2230_switch_radio_on(struct zd_rf *rf) +{ + struct zd_chip *chip = zd_rf_to_chip(rf); + static const struct zd_ioreq16 ioreqs[] = { + { CR11, 0x00 }, + { CR251, 0x3f }, + }; + + return zd_iowrite16a_locked(chip, ioreqs, ARRAY_SIZE(ioreqs)); +} + +static int zd1211b_al2230_switch_radio_on(struct zd_rf *rf) +{ + struct zd_chip *chip = zd_rf_to_chip(rf); + static const struct zd_ioreq16 ioreqs[] = { + { CR11, 0x00 }, + { CR251, 0x7f }, + }; + + return zd_iowrite16a_locked(chip, ioreqs, ARRAY_SIZE(ioreqs)); +} + +static int al2230_switch_radio_off(struct zd_rf *rf) +{ + struct zd_chip *chip = zd_rf_to_chip(rf); + static const struct zd_ioreq16 ioreqs[] = { + { CR11, 0x04 }, + { CR251, 0x2f }, + }; + + return zd_iowrite16a_locked(chip, ioreqs, ARRAY_SIZE(ioreqs)); +} + +int zd_rf_init_al2230(struct zd_rf *rf) +{ + struct zd_chip *chip = zd_rf_to_chip(rf); + + rf->set_channel = al2230_set_channel; + rf->switch_radio_off = al2230_switch_radio_off; + if (chip->is_zd1211b) { + rf->init_hw = zd1211b_al2230_init_hw; + rf->switch_radio_on = zd1211b_al2230_switch_radio_on; + } else { + rf->init_hw = zd1211_al2230_init_hw; + rf->switch_radio_on = zd1211_al2230_switch_radio_on; + } + rf->patch_6m_band_edge = 1; + return 0; +} diff --git a/drivers/net/wireless/zd1211rw/zd_rf_rf2959.c b/drivers/net/wireless/zd1211rw/zd_rf_rf2959.c new file mode 100644 index 00000000000..58247271cc2 --- /dev/null +++ b/drivers/net/wireless/zd1211rw/zd_rf_rf2959.c @@ -0,0 +1,279 @@ +/* zd_rf_rfmd.c: Functions for the RFMD RF controller + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#include + +#include "zd_rf.h" +#include "zd_usb.h" +#include "zd_chip.h" + +static u32 rf2959_table[][2] = { + RF_CHANNEL( 1) = { 0x181979, 0x1e6666 }, + RF_CHANNEL( 2) = { 0x181989, 0x1e6666 }, + RF_CHANNEL( 3) = { 0x181999, 0x1e6666 }, + RF_CHANNEL( 4) = { 0x1819a9, 0x1e6666 }, + RF_CHANNEL( 5) = { 0x1819b9, 0x1e6666 }, + RF_CHANNEL( 6) = { 0x1819c9, 0x1e6666 }, + RF_CHANNEL( 7) = { 0x1819d9, 0x1e6666 }, + RF_CHANNEL( 8) = { 0x1819e9, 0x1e6666 }, + RF_CHANNEL( 9) = { 0x1819f9, 0x1e6666 }, + RF_CHANNEL(10) = { 0x181a09, 0x1e6666 }, + RF_CHANNEL(11) = { 0x181a19, 0x1e6666 }, + RF_CHANNEL(12) = { 0x181a29, 0x1e6666 }, + RF_CHANNEL(13) = { 0x181a39, 0x1e6666 }, + RF_CHANNEL(14) = { 0x181a60, 0x1c0000 }, +}; + +#if 0 +static int bits(u32 rw, int from, int to) +{ + rw &= ~(0xffffffffU << (to+1)); + rw >>= from; + return rw; +} + +static int bit(u32 rw, int bit) +{ + return bits(rw, bit, bit); +} + +static void dump_regwrite(u32 rw) +{ + int reg = bits(rw, 18, 22); + int rw_flag = bits(rw, 23, 23); + PDEBUG("rf2959 %#010x reg %d rw %d", rw, reg, rw_flag); + + switch (reg) { + case 0: + PDEBUG("reg0 CFG1 ref_sel %d hybernate %d rf_vco_reg_en %d" + " if_vco_reg_en %d if_vga_en %d", + bits(rw, 14, 15), bit(rw, 3), bit(rw, 2), bit(rw, 1), + bit(rw, 0)); + break; + case 1: + PDEBUG("reg1 IFPLL1 pll_en1 %d kv_en1 %d vtc_en1 %d lpf1 %d" + " cpl1 %d pdp1 %d autocal_en1 %d ld_en1 %d ifloopr %d" + " ifloopc %d dac1 %d", + bit(rw, 17), bit(rw, 16), bit(rw, 15), bit(rw, 14), + bit(rw, 13), bit(rw, 12), bit(rw, 11), bit(rw, 10), + bits(rw, 7, 9), bits(rw, 4, 6), bits(rw, 0, 3)); + break; + case 2: + PDEBUG("reg2 IFPLL2 n1 %d num1 %d", + bits(rw, 6, 17), bits(rw, 0, 5)); + break; + case 3: + PDEBUG("reg3 IFPLL3 num %d", bits(rw, 0, 17)); + break; + case 4: + PDEBUG("reg4 IFPLL4 dn1 %#04x ct_def1 %d kv_def1 %d", + bits(rw, 8, 16), bits(rw, 4, 7), bits(rw, 0, 3)); + break; + case 5: + PDEBUG("reg5 RFPLL1 pll_en %d kv_en %d vtc_en %d lpf %d cpl %d" + " pdp %d autocal_en %d ld_en %d rfloopr %d rfloopc %d" + " dac %d", + bit(rw, 17), bit(rw, 16), bit(rw, 15), bit(rw, 14), + bit(rw, 13), bit(rw, 12), bit(rw, 11), bit(rw, 10), + bits(rw, 7, 9), bits(rw, 4, 6), bits(rw, 0,3)); + break; + case 6: + PDEBUG("reg6 RFPLL2 n %d num %d", + bits(rw, 6, 17), bits(rw, 0, 5)); + break; + case 7: + PDEBUG("reg7 RFPLL3 num2 %d", bits(rw, 0, 17)); + break; + case 8: + PDEBUG("reg8 RFPLL4 dn %#06x ct_def %d kv_def %d", + bits(rw, 8, 16), bits(rw, 4, 7), bits(rw, 0, 3)); + break; + case 9: + PDEBUG("reg9 CAL1 tvco %d tlock %d m_ct_value %d ld_window %d", + bits(rw, 13, 17), bits(rw, 8, 12), bits(rw, 3, 7), + bits(rw, 0, 2)); + break; + case 10: + PDEBUG("reg10 TXRX1 rxdcfbbyps %d pcontrol %d txvgc %d" + " rxlpfbw %d txlpfbw %d txdiffmode %d txenmode %d" + " intbiasen %d tybypass %d", + bit(rw, 17), bits(rw, 15, 16), bits(rw, 10, 14), + bits(rw, 7, 9), bits(rw, 4, 6), bit(rw, 3), bit(rw, 2), + bit(rw, 1), bit(rw, 0)); + break; + case 11: + PDEBUG("reg11 PCNT1 mid_bias %d p_desired %d pc_offset %d" + " tx_delay %d", + bits(rw, 15, 17), bits(rw, 9, 14), bits(rw, 3, 8), + bits(rw, 0, 2)); + break; + case 12: + PDEBUG("reg12 PCNT2 max_power %d mid_power %d min_power %d", + bits(rw, 12, 17), bits(rw, 6, 11), bits(rw, 0, 5)); + break; + case 13: + PDEBUG("reg13 VCOT1 rfpll vco comp %d ifpll vco comp %d" + " lobias %d if_biasbuf %d if_biasvco %d rf_biasbuf %d" + " rf_biasvco %d", + bit(rw, 17), bit(rw, 16), bit(rw, 15), + bits(rw, 8, 9), bits(rw, 5, 7), bits(rw, 3, 4), + bits(rw, 0, 2)); + break; + case 14: + PDEBUG("reg14 IQCAL rx_acal %d rx_pcal %d" + " tx_acal %d tx_pcal %d", + bits(rw, 13, 17), bits(rw, 9, 12), bits(rw, 4, 8), + bits(rw, 0, 3)); + break; + } +} +#endif /* 0 */ + +static int rf2959_init_hw(struct zd_rf *rf) +{ + int r; + struct zd_chip *chip = zd_rf_to_chip(rf); + + static const struct zd_ioreq16 ioreqs[] = { + { CR2, 0x1E }, { CR9, 0x20 }, { CR10, 0x89 }, + { CR11, 0x00 }, { CR15, 0xD0 }, { CR17, 0x68 }, + { CR19, 0x4a }, { CR20, 0x0c }, { CR21, 0x0E }, + { CR23, 0x48 }, + /* normal size for cca threshold */ + { CR24, 0x14 }, + /* { CR24, 0x20 }, */ + { CR26, 0x90 }, { CR27, 0x30 }, { CR29, 0x20 }, + { CR31, 0xb2 }, { CR32, 0x43 }, { CR33, 0x28 }, + { CR38, 0x30 }, { CR34, 0x0f }, { CR35, 0xF0 }, + { CR41, 0x2a }, { CR46, 0x7F }, { CR47, 0x1E }, + { CR51, 0xc5 }, { CR52, 0xc5 }, { CR53, 0xc5 }, + { CR79, 0x58 }, { CR80, 0x30 }, { CR81, 0x30 }, + { CR82, 0x00 }, { CR83, 0x24 }, { CR84, 0x04 }, + { CR85, 0x00 }, { CR86, 0x10 }, { CR87, 0x2A }, + { CR88, 0x10 }, { CR89, 0x24 }, { CR90, 0x18 }, + /* { CR91, 0x18 }, */ + /* should solve continous CTS frame problems */ + { CR91, 0x00 }, + { CR92, 0x0a }, { CR93, 0x00 }, { CR94, 0x01 }, + { CR95, 0x00 }, { CR96, 0x40 }, { CR97, 0x37 }, + { CR98, 0x05 }, { CR99, 0x28 }, { CR100, 0x00 }, + { CR101, 0x13 }, { CR102, 0x27 }, { CR103, 0x27 }, + { CR104, 0x18 }, { CR105, 0x12 }, + /* normal size */ + { CR106, 0x1a }, + /* { CR106, 0x22 }, */ + { CR107, 0x24 }, { CR108, 0x0a }, { CR109, 0x13 }, + { CR110, 0x2F }, { CR111, 0x27 }, { CR112, 0x27 }, + { CR113, 0x27 }, { CR114, 0x27 }, { CR115, 0x40 }, + { CR116, 0x40 }, { CR117, 0xF0 }, { CR118, 0xF0 }, + { CR119, 0x16 }, + /* no TX continuation */ + { CR122, 0x00 }, + /* { CR122, 0xff }, */ + { CR127, 0x03 }, { CR131, 0x08 }, { CR138, 0x28 }, + { CR148, 0x44 }, { CR150, 0x10 }, { CR169, 0xBB }, + { CR170, 0xBB }, + }; + + static const u32 rv[] = { + 0x000007, /* REG0(CFG1) */ + 0x07dd43, /* REG1(IFPLL1) */ + 0x080959, /* REG2(IFPLL2) */ + 0x0e6666, + 0x116a57, /* REG4 */ + 0x17dd43, /* REG5 */ + 0x1819f9, /* REG6 */ + 0x1e6666, + 0x214554, + 0x25e7fa, + 0x27fffa, + /* The Zydas driver somehow forgets to set this value. It's + * only set for Japan. We are using internal power control + * for now. + */ + 0x294128, /* internal power */ + /* 0x28252c, */ /* External control TX power */ + /* CR31_CCK, CR51_6-36M, CR52_48M, CR53_54M */ + 0x2c0000, + 0x300000, + 0x340000, /* REG13(0xD) */ + 0x381e0f, /* REG14(0xE) */ + /* Bogus, RF2959's data sheet doesn't know register 27, which is + * actually referenced here. The commented 0x11 is 17. + */ + 0x6c180f, /* REG27(0x11) */ + }; + + r = zd_iowrite16a_locked(chip, ioreqs, ARRAY_SIZE(ioreqs)); + if (r) + return r; + + return zd_rfwritev_locked(chip, rv, ARRAY_SIZE(rv), RF_RV_BITS); +} + +static int rf2959_set_channel(struct zd_rf *rf, u8 channel) +{ + int i, r; + u32 *rv = rf2959_table[channel-1]; + struct zd_chip *chip = zd_rf_to_chip(rf); + + for (i = 0; i < 2; i++) { + r = zd_rfwrite_locked(chip, rv[i], RF_RV_BITS); + if (r) + return r; + } + return 0; +} + +static int rf2959_switch_radio_on(struct zd_rf *rf) +{ + static const struct zd_ioreq16 ioreqs[] = { + { CR10, 0x89 }, + { CR11, 0x00 }, + }; + struct zd_chip *chip = zd_rf_to_chip(rf); + + return zd_iowrite16a_locked(chip, ioreqs, ARRAY_SIZE(ioreqs)); +} + +static int rf2959_switch_radio_off(struct zd_rf *rf) +{ + static const struct zd_ioreq16 ioreqs[] = { + { CR10, 0x15 }, + { CR11, 0x81 }, + }; + struct zd_chip *chip = zd_rf_to_chip(rf); + + return zd_iowrite16a_locked(chip, ioreqs, ARRAY_SIZE(ioreqs)); +} + +int zd_rf_init_rf2959(struct zd_rf *rf) +{ + struct zd_chip *chip = zd_rf_to_chip(rf); + + if (chip->is_zd1211b) { + dev_err(zd_chip_dev(chip), + "RF2959 is currently not supported for ZD1211B" + " devices\n"); + return -ENODEV; + } + rf->init_hw = rf2959_init_hw; + rf->set_channel = rf2959_set_channel; + rf->switch_radio_on = rf2959_switch_radio_on; + rf->switch_radio_off = rf2959_switch_radio_off; + return 0; +} diff --git a/drivers/net/wireless/zd1211rw/zd_types.h b/drivers/net/wireless/zd1211rw/zd_types.h new file mode 100644 index 00000000000..0155a1584ed --- /dev/null +++ b/drivers/net/wireless/zd1211rw/zd_types.h @@ -0,0 +1,71 @@ +/* zd_types.h + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#ifndef _ZD_TYPES_H +#define _ZD_TYPES_H + +#include + +/* We have three register spaces mapped into the overall USB address space of + * 64K words (16-bit values). There is the control register space of + * double-word registers, the eeprom register space and the firmware register + * space. The control register space is byte mapped, the others are word + * mapped. + * + * For that reason, we are using byte offsets for control registers and word + * offsets for everything else. + */ + +typedef u32 __nocast zd_addr_t; + +enum { + ADDR_BASE_MASK = 0xff000000, + ADDR_OFFSET_MASK = 0x0000ffff, + ADDR_ZERO_MASK = 0x00ff0000, + NULL_BASE = 0x00000000, + USB_BASE = 0x01000000, + CR_BASE = 0x02000000, + CR_MAX_OFFSET = 0x0b30, + E2P_BASE = 0x03000000, + E2P_MAX_OFFSET = 0x007e, + FW_BASE = 0x04000000, + FW_MAX_OFFSET = 0x0005, +}; + +#define ZD_ADDR_BASE(addr) ((u32)(addr) & ADDR_BASE_MASK) +#define ZD_OFFSET(addr) ((u32)(addr) & ADDR_OFFSET_MASK) + +#define ZD_ADDR(base, offset) \ + ((zd_addr_t)(((base) & ADDR_BASE_MASK) | ((offset) & ADDR_OFFSET_MASK))) + +#define ZD_NULL_ADDR ((zd_addr_t)0) +#define USB_REG(offset) ZD_ADDR(USB_BASE, offset) /* word addressing */ +#define CTL_REG(offset) ZD_ADDR(CR_BASE, offset) /* byte addressing */ +#define E2P_REG(offset) ZD_ADDR(E2P_BASE, offset) /* word addressing */ +#define FW_REG(offset) ZD_ADDR(FW_BASE, offset) /* word addressing */ + +static inline zd_addr_t zd_inc_word(zd_addr_t addr) +{ + u32 base = ZD_ADDR_BASE(addr); + u32 offset = ZD_OFFSET(addr); + + offset += base == CR_BASE ? 2 : 1; + + return base | offset; +} + +#endif /* _ZD_TYPES_H */ diff --git a/drivers/net/wireless/zd1211rw/zd_usb.c b/drivers/net/wireless/zd1211rw/zd_usb.c new file mode 100644 index 00000000000..ce1cb2c6aa8 --- /dev/null +++ b/drivers/net/wireless/zd1211rw/zd_usb.c @@ -0,0 +1,1316 @@ +/* zd_usb.c + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include "zd_def.h" +#include "zd_netdev.h" +#include "zd_mac.h" +#include "zd_usb.h" +#include "zd_util.h" + +static struct usb_device_id usb_ids[] = { + /* ZD1211 */ + { USB_DEVICE(0x0ace, 0x1211), .driver_info = DEVICE_ZD1211 }, + { USB_DEVICE(0x07b8, 0x6001), .driver_info = DEVICE_ZD1211 }, + { USB_DEVICE(0x126f, 0xa006), .driver_info = DEVICE_ZD1211 }, + { USB_DEVICE(0x6891, 0xa727), .driver_info = DEVICE_ZD1211 }, + { USB_DEVICE(0x0df6, 0x9071), .driver_info = DEVICE_ZD1211 }, + { USB_DEVICE(0x157e, 0x300b), .driver_info = DEVICE_ZD1211 }, + /* ZD1211B */ + { USB_DEVICE(0x0ace, 0x1215), .driver_info = DEVICE_ZD1211B }, + { USB_DEVICE(0x157e, 0x300d), .driver_info = DEVICE_ZD1211B }, + {} +}; + +MODULE_LICENSE("GPL"); +MODULE_DESCRIPTION("USB driver for devices with the ZD1211 chip."); +MODULE_AUTHOR("Ulrich Kunitz"); +MODULE_AUTHOR("Daniel Drake"); +MODULE_VERSION("1.0"); +MODULE_DEVICE_TABLE(usb, usb_ids); + +#define FW_ZD1211_PREFIX "zd1211/zd1211_" +#define FW_ZD1211B_PREFIX "zd1211/zd1211b_" + +/* register address handling */ + +#ifdef DEBUG +static int check_addr(struct zd_usb *usb, zd_addr_t addr) +{ + u32 base = ZD_ADDR_BASE(addr); + u32 offset = ZD_OFFSET(addr); + + if ((u32)addr & ADDR_ZERO_MASK) + goto invalid_address; + switch (base) { + case USB_BASE: + break; + case CR_BASE: + if (offset > CR_MAX_OFFSET) { + dev_dbg(zd_usb_dev(usb), + "CR offset %#010x larger than" + " CR_MAX_OFFSET %#10x\n", + offset, CR_MAX_OFFSET); + goto invalid_address; + } + if (offset & 1) { + dev_dbg(zd_usb_dev(usb), + "CR offset %#010x is not a multiple of 2\n", + offset); + goto invalid_address; + } + break; + case E2P_BASE: + if (offset > E2P_MAX_OFFSET) { + dev_dbg(zd_usb_dev(usb), + "E2P offset %#010x larger than" + " E2P_MAX_OFFSET %#010x\n", + offset, E2P_MAX_OFFSET); + goto invalid_address; + } + break; + case FW_BASE: + if (!usb->fw_base_offset) { + dev_dbg(zd_usb_dev(usb), + "ERROR: fw base offset has not been set\n"); + return -EAGAIN; + } + if (offset > FW_MAX_OFFSET) { + dev_dbg(zd_usb_dev(usb), + "FW offset %#10x is larger than" + " FW_MAX_OFFSET %#010x\n", + offset, FW_MAX_OFFSET); + goto invalid_address; + } + break; + default: + dev_dbg(zd_usb_dev(usb), + "address has unsupported base %#010x\n", addr); + goto invalid_address; + } + + return 0; +invalid_address: + dev_dbg(zd_usb_dev(usb), + "ERROR: invalid address: %#010x\n", addr); + return -EINVAL; +} +#endif /* DEBUG */ + +static u16 usb_addr(struct zd_usb *usb, zd_addr_t addr) +{ + u32 base; + u16 offset; + + base = ZD_ADDR_BASE(addr); + offset = ZD_OFFSET(addr); + + ZD_ASSERT(check_addr(usb, addr) == 0); + + switch (base) { + case CR_BASE: + offset += CR_BASE_OFFSET; + break; + case E2P_BASE: + offset += E2P_BASE_OFFSET; + break; + case FW_BASE: + offset += usb->fw_base_offset; + break; + } + + return offset; +} + +/* USB device initialization */ + +static int request_fw_file( + const struct firmware **fw, const char *name, struct device *device) +{ + int r; + + dev_dbg_f(device, "fw name %s\n", name); + + r = request_firmware(fw, name, device); + if (r) + dev_err(device, + "Could not load firmware file %s. Error number %d\n", + name, r); + return r; +} + +static inline u16 get_bcdDevice(const struct usb_device *udev) +{ + return le16_to_cpu(udev->descriptor.bcdDevice); +} + +enum upload_code_flags { + REBOOT = 1, +}; + +/* Ensures that MAX_TRANSFER_SIZE is even. */ +#define MAX_TRANSFER_SIZE (USB_MAX_TRANSFER_SIZE & ~1) + +static int upload_code(struct usb_device *udev, + const u8 *data, size_t size, u16 code_offset, int flags) +{ + u8 *p; + int r; + + /* USB request blocks need "kmalloced" buffers. + */ + p = kmalloc(MAX_TRANSFER_SIZE, GFP_KERNEL); + if (!p) { + dev_err(&udev->dev, "out of memory\n"); + r = -ENOMEM; + goto error; + } + + size &= ~1; + while (size > 0) { + size_t transfer_size = size <= MAX_TRANSFER_SIZE ? + size : MAX_TRANSFER_SIZE; + + dev_dbg_f(&udev->dev, "transfer size %zu\n", transfer_size); + + memcpy(p, data, transfer_size); + r = usb_control_msg(udev, usb_sndctrlpipe(udev, 0), + USB_REQ_FIRMWARE_DOWNLOAD, + USB_DIR_OUT | USB_TYPE_VENDOR, + code_offset, 0, p, transfer_size, 1000 /* ms */); + if (r < 0) { + dev_err(&udev->dev, + "USB control request for firmware upload" + " failed. Error number %d\n", r); + goto error; + } + transfer_size = r & ~1; + + size -= transfer_size; + data += transfer_size; + code_offset += transfer_size/sizeof(u16); + } + + if (flags & REBOOT) { + u8 ret; + + r = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0), + USB_REQ_FIRMWARE_CONFIRM, + USB_DIR_IN | USB_TYPE_VENDOR, + 0, 0, &ret, sizeof(ret), 5000 /* ms */); + if (r != sizeof(ret)) { + dev_err(&udev->dev, + "control request firmeware confirmation failed." + " Return value %d\n", r); + if (r >= 0) + r = -ENODEV; + goto error; + } + if (ret & 0x80) { + dev_err(&udev->dev, + "Internal error while downloading." + " Firmware confirm return value %#04x\n", + (unsigned int)ret); + r = -ENODEV; + goto error; + } + dev_dbg_f(&udev->dev, "firmware confirm return value %#04x\n", + (unsigned int)ret); + } + + r = 0; +error: + kfree(p); + return r; +} + +static u16 get_word(const void *data, u16 offset) +{ + const __le16 *p = data; + return le16_to_cpu(p[offset]); +} + +static char *get_fw_name(char *buffer, size_t size, u8 device_type, + const char* postfix) +{ + scnprintf(buffer, size, "%s%s", + device_type == DEVICE_ZD1211B ? + FW_ZD1211B_PREFIX : FW_ZD1211_PREFIX, + postfix); + return buffer; +} + +static int upload_firmware(struct usb_device *udev, u8 device_type) +{ + int r; + u16 fw_bcdDevice; + u16 bcdDevice; + const struct firmware *ub_fw = NULL; + const struct firmware *uph_fw = NULL; + char fw_name[128]; + + bcdDevice = get_bcdDevice(udev); + + r = request_fw_file(&ub_fw, + get_fw_name(fw_name, sizeof(fw_name), device_type, "ub"), + &udev->dev); + if (r) + goto error; + + fw_bcdDevice = get_word(ub_fw->data, EEPROM_REGS_OFFSET); + + /* FIXME: do we have any reason to perform the kludge that the vendor + * driver does when there is a version mismatch? (their driver uploads + * different firmwares and stuff) + */ + if (fw_bcdDevice != bcdDevice) { + dev_info(&udev->dev, + "firmware device id %#06x and actual device id " + "%#06x differ, continuing anyway\n", + fw_bcdDevice, bcdDevice); + } else { + dev_dbg_f(&udev->dev, + "firmware device id %#06x is equal to the " + "actual device id\n", fw_bcdDevice); + } + + + r = request_fw_file(&uph_fw, + get_fw_name(fw_name, sizeof(fw_name), device_type, "uphr"), + &udev->dev); + if (r) + goto error; + + r = upload_code(udev, uph_fw->data, uph_fw->size, FW_START_OFFSET, + REBOOT); + if (r) { + dev_err(&udev->dev, + "Could not upload firmware code uph. Error number %d\n", + r); + } + + /* FALL-THROUGH */ +error: + release_firmware(ub_fw); + release_firmware(uph_fw); + return r; +} + +static void disable_read_regs_int(struct zd_usb *usb) +{ + struct zd_usb_interrupt *intr = &usb->intr; + + ZD_ASSERT(in_interrupt()); + spin_lock(&intr->lock); + intr->read_regs_enabled = 0; + spin_unlock(&intr->lock); +} + +#define urb_dev(urb) (&(urb)->dev->dev) + +static inline void handle_regs_int(struct urb *urb) +{ + struct zd_usb *usb = urb->context; + struct zd_usb_interrupt *intr = &usb->intr; + int len; + + ZD_ASSERT(in_interrupt()); + spin_lock(&intr->lock); + + if (intr->read_regs_enabled) { + intr->read_regs.length = len = urb->actual_length; + + if (len > sizeof(intr->read_regs.buffer)) + len = sizeof(intr->read_regs.buffer); + memcpy(intr->read_regs.buffer, urb->transfer_buffer, len); + intr->read_regs_enabled = 0; + complete(&intr->read_regs.completion); + goto out; + } + + dev_dbg_f(urb_dev(urb), "regs interrupt ignored\n"); +out: + spin_unlock(&intr->lock); +} + +static inline void handle_retry_failed_int(struct urb *urb) +{ + dev_dbg_f(urb_dev(urb), "retry failed interrupt\n"); +} + + +static void int_urb_complete(struct urb *urb, struct pt_regs *pt_regs) +{ + int r; + struct usb_int_header *hdr; + + switch (urb->status) { + case 0: + break; + case -ESHUTDOWN: + case -EINVAL: + case -ENODEV: + case -ENOENT: + case -ECONNRESET: + goto kfree; + case -EPIPE: + usb_clear_halt(urb->dev, EP_INT_IN); + /* FALL-THROUGH */ + default: + goto resubmit; + } + + if (urb->actual_length < sizeof(hdr)) { + dev_dbg_f(urb_dev(urb), "error: urb %p to small\n", urb); + goto resubmit; + } + + hdr = urb->transfer_buffer; + if (hdr->type != USB_INT_TYPE) { + dev_dbg_f(urb_dev(urb), "error: urb %p wrong type\n", urb); + goto resubmit; + } + + switch (hdr->id) { + case USB_INT_ID_REGS: + handle_regs_int(urb); + break; + case USB_INT_ID_RETRY_FAILED: + handle_retry_failed_int(urb); + break; + default: + dev_dbg_f(urb_dev(urb), "error: urb %p unknown id %x\n", urb, + (unsigned int)hdr->id); + goto resubmit; + } + +resubmit: + r = usb_submit_urb(urb, GFP_ATOMIC); + if (r) { + dev_dbg_f(urb_dev(urb), "resubmit urb %p\n", urb); + goto kfree; + } + return; +kfree: + kfree(urb->transfer_buffer); +} + +static inline int int_urb_interval(struct usb_device *udev) +{ + switch (udev->speed) { + case USB_SPEED_HIGH: + return 4; + case USB_SPEED_LOW: + return 10; + case USB_SPEED_FULL: + default: + return 1; + } +} + +static inline int usb_int_enabled(struct zd_usb *usb) +{ + unsigned long flags; + struct zd_usb_interrupt *intr = &usb->intr; + struct urb *urb; + + spin_lock_irqsave(&intr->lock, flags); + urb = intr->urb; + spin_unlock_irqrestore(&intr->lock, flags); + return urb != NULL; +} + +int zd_usb_enable_int(struct zd_usb *usb) +{ + int r; + struct usb_device *udev; + struct zd_usb_interrupt *intr = &usb->intr; + void *transfer_buffer = NULL; + struct urb *urb; + + dev_dbg_f(zd_usb_dev(usb), "\n"); + + urb = usb_alloc_urb(0, GFP_NOFS); + if (!urb) { + r = -ENOMEM; + goto out; + } + + ZD_ASSERT(!irqs_disabled()); + spin_lock_irq(&intr->lock); + if (intr->urb) { + spin_unlock_irq(&intr->lock); + r = 0; + goto error_free_urb; + } + intr->urb = urb; + spin_unlock_irq(&intr->lock); + + /* TODO: make it a DMA buffer */ + r = -ENOMEM; + transfer_buffer = kmalloc(USB_MAX_EP_INT_BUFFER, GFP_NOFS); + if (!transfer_buffer) { + dev_dbg_f(zd_usb_dev(usb), + "couldn't allocate transfer_buffer\n"); + goto error_set_urb_null; + } + + udev = zd_usb_to_usbdev(usb); + usb_fill_int_urb(urb, udev, usb_rcvintpipe(udev, EP_INT_IN), + transfer_buffer, USB_MAX_EP_INT_BUFFER, + int_urb_complete, usb, + intr->interval); + + dev_dbg_f(zd_usb_dev(usb), "submit urb %p\n", intr->urb); + r = usb_submit_urb(urb, GFP_NOFS); + if (r) { + dev_dbg_f(zd_usb_dev(usb), + "Couldn't submit urb. Error number %d\n", r); + goto error; + } + + return 0; +error: + kfree(transfer_buffer); +error_set_urb_null: + spin_lock_irq(&intr->lock); + intr->urb = NULL; + spin_unlock_irq(&intr->lock); +error_free_urb: + usb_free_urb(urb); +out: + return r; +} + +void zd_usb_disable_int(struct zd_usb *usb) +{ + unsigned long flags; + struct zd_usb_interrupt *intr = &usb->intr; + struct urb *urb; + + spin_lock_irqsave(&intr->lock, flags); + urb = intr->urb; + if (!urb) { + spin_unlock_irqrestore(&intr->lock, flags); + return; + } + intr->urb = NULL; + spin_unlock_irqrestore(&intr->lock, flags); + + usb_kill_urb(urb); + dev_dbg_f(zd_usb_dev(usb), "urb %p killed\n", urb); + usb_free_urb(urb); +} + +static void handle_rx_packet(struct zd_usb *usb, const u8 *buffer, + unsigned int length) +{ + int i; + struct zd_mac *mac = zd_usb_to_mac(usb); + const struct rx_length_info *length_info; + + if (length < sizeof(struct rx_length_info)) { + /* It's not a complete packet anyhow. */ + return; + } + length_info = (struct rx_length_info *) + (buffer + length - sizeof(struct rx_length_info)); + + /* It might be that three frames are merged into a single URB + * transaction. We have to check for the length info tag. + * + * While testing we discovered that length_info might be unaligned, + * because if USB transactions are merged, the last packet will not + * be padded. Unaligned access might also happen if the length_info + * structure is not present. + */ + if (get_unaligned(&length_info->tag) == RX_LENGTH_INFO_TAG) { + unsigned int l, k, n; + for (i = 0, l = 0;; i++) { + k = le16_to_cpu(get_unaligned( + &length_info->length[i])); + n = l+k; + if (n > length) + return; + zd_mac_rx(mac, buffer+l, k); + if (i >= 2) + return; + l = (n+3) & ~3; + } + } else { + zd_mac_rx(mac, buffer, length); + } +} + +static void rx_urb_complete(struct urb *urb, struct pt_regs *pt_regs) +{ + struct zd_usb *usb; + struct zd_usb_rx *rx; + const u8 *buffer; + unsigned int length; + + switch (urb->status) { + case 0: + break; + case -ESHUTDOWN: + case -EINVAL: + case -ENODEV: + case -ENOENT: + case -ECONNRESET: + return; + case -EPIPE: + usb_clear_halt(urb->dev, EP_DATA_IN); + /* FALL-THROUGH */ + default: + dev_dbg_f(urb_dev(urb), "urb %p error %d\n", urb, urb->status); + goto resubmit; + } + + buffer = urb->transfer_buffer; + length = urb->actual_length; + usb = urb->context; + rx = &usb->rx; + + if (length%rx->usb_packet_size > rx->usb_packet_size-4) { + /* If there is an old first fragment, we don't care. */ + dev_dbg_f(urb_dev(urb), "*** first fragment ***\n"); + ZD_ASSERT(length <= ARRAY_SIZE(rx->fragment)); + spin_lock(&rx->lock); + memcpy(rx->fragment, buffer, length); + rx->fragment_length = length; + spin_unlock(&rx->lock); + goto resubmit; + } + + spin_lock(&rx->lock); + if (rx->fragment_length > 0) { + /* We are on a second fragment, we believe */ + ZD_ASSERT(length + rx->fragment_length <= + ARRAY_SIZE(rx->fragment)); + dev_dbg_f(urb_dev(urb), "*** second fragment ***\n"); + memcpy(rx->fragment+rx->fragment_length, buffer, length); + handle_rx_packet(usb, rx->fragment, + rx->fragment_length + length); + rx->fragment_length = 0; + spin_unlock(&rx->lock); + } else { + spin_unlock(&rx->lock); + handle_rx_packet(usb, buffer, length); + } + +resubmit: + usb_submit_urb(urb, GFP_ATOMIC); +} + +struct urb *alloc_urb(struct zd_usb *usb) +{ + struct usb_device *udev = zd_usb_to_usbdev(usb); + struct urb *urb; + void *buffer; + + urb = usb_alloc_urb(0, GFP_NOFS); + if (!urb) + return NULL; + buffer = usb_buffer_alloc(udev, USB_MAX_RX_SIZE, GFP_NOFS, + &urb->transfer_dma); + if (!buffer) { + usb_free_urb(urb); + return NULL; + } + + usb_fill_bulk_urb(urb, udev, usb_rcvbulkpipe(udev, EP_DATA_IN), + buffer, USB_MAX_RX_SIZE, + rx_urb_complete, usb); + urb->transfer_flags |= URB_NO_TRANSFER_DMA_MAP; + + return urb; +} + +void free_urb(struct urb *urb) +{ + if (!urb) + return; + usb_buffer_free(urb->dev, urb->transfer_buffer_length, + urb->transfer_buffer, urb->transfer_dma); + usb_free_urb(urb); +} + +int zd_usb_enable_rx(struct zd_usb *usb) +{ + int i, r; + struct zd_usb_rx *rx = &usb->rx; + struct urb **urbs; + + dev_dbg_f(zd_usb_dev(usb), "\n"); + + r = -ENOMEM; + urbs = kcalloc(URBS_COUNT, sizeof(struct urb *), GFP_NOFS); + if (!urbs) + goto error; + for (i = 0; i < URBS_COUNT; i++) { + urbs[i] = alloc_urb(usb); + if (!urbs[i]) + goto error; + } + + ZD_ASSERT(!irqs_disabled()); + spin_lock_irq(&rx->lock); + if (rx->urbs) { + spin_unlock_irq(&rx->lock); + r = 0; + goto error; + } + rx->urbs = urbs; + rx->urbs_count = URBS_COUNT; + spin_unlock_irq(&rx->lock); + + for (i = 0; i < URBS_COUNT; i++) { + r = usb_submit_urb(urbs[i], GFP_NOFS); + if (r) + goto error_submit; + } + + return 0; +error_submit: + for (i = 0; i < URBS_COUNT; i++) { + usb_kill_urb(urbs[i]); + } + spin_lock_irq(&rx->lock); + rx->urbs = NULL; + rx->urbs_count = 0; + spin_unlock_irq(&rx->lock); +error: + if (urbs) { + for (i = 0; i < URBS_COUNT; i++) + free_urb(urbs[i]); + } + return r; +} + +void zd_usb_disable_rx(struct zd_usb *usb) +{ + int i; + unsigned long flags; + struct urb **urbs; + unsigned int count; + struct zd_usb_rx *rx = &usb->rx; + + spin_lock_irqsave(&rx->lock, flags); + urbs = rx->urbs; + count = rx->urbs_count; + spin_unlock_irqrestore(&rx->lock, flags); + if (!urbs) + return; + + for (i = 0; i < count; i++) { + usb_kill_urb(urbs[i]); + free_urb(urbs[i]); + } + kfree(urbs); + + spin_lock_irqsave(&rx->lock, flags); + rx->urbs = NULL; + rx->urbs_count = 0; + spin_unlock_irqrestore(&rx->lock, flags); +} + +static void tx_urb_complete(struct urb *urb, struct pt_regs *pt_regs) +{ + int r; + + switch (urb->status) { + case 0: + break; + case -ESHUTDOWN: + case -EINVAL: + case -ENODEV: + case -ENOENT: + case -ECONNRESET: + dev_dbg_f(urb_dev(urb), "urb %p error %d\n", urb, urb->status); + break; + case -EPIPE: + usb_clear_halt(urb->dev, EP_DATA_OUT); + /* FALL-THROUGH */ + default: + dev_dbg_f(urb_dev(urb), "urb %p error %d\n", urb, urb->status); + goto resubmit; + } +free_urb: + usb_buffer_free(urb->dev, urb->transfer_buffer_length, + urb->transfer_buffer, urb->transfer_dma); + usb_free_urb(urb); + return; +resubmit: + r = usb_submit_urb(urb, GFP_ATOMIC); + if (r) { + dev_dbg_f(urb_dev(urb), "error resubmit urb %p %d\n", urb, r); + goto free_urb; + } +} + +/* Puts the frame on the USB endpoint. It doesn't wait for + * completion. The frame must contain the control set. + */ +int zd_usb_tx(struct zd_usb *usb, const u8 *frame, unsigned int length) +{ + int r; + struct usb_device *udev = zd_usb_to_usbdev(usb); + struct urb *urb; + void *buffer; + + urb = usb_alloc_urb(0, GFP_ATOMIC); + if (!urb) { + r = -ENOMEM; + goto out; + } + + buffer = usb_buffer_alloc(zd_usb_to_usbdev(usb), length, GFP_ATOMIC, + &urb->transfer_dma); + if (!buffer) { + r = -ENOMEM; + goto error_free_urb; + } + memcpy(buffer, frame, length); + + usb_fill_bulk_urb(urb, udev, usb_sndbulkpipe(udev, EP_DATA_OUT), + buffer, length, tx_urb_complete, NULL); + urb->transfer_flags |= URB_NO_TRANSFER_DMA_MAP; + + r = usb_submit_urb(urb, GFP_ATOMIC); + if (r) + goto error; + return 0; +error: + usb_buffer_free(zd_usb_to_usbdev(usb), length, buffer, + urb->transfer_dma); +error_free_urb: + usb_free_urb(urb); +out: + return r; +} + +static inline void init_usb_interrupt(struct zd_usb *usb) +{ + struct zd_usb_interrupt *intr = &usb->intr; + + spin_lock_init(&intr->lock); + intr->interval = int_urb_interval(zd_usb_to_usbdev(usb)); + init_completion(&intr->read_regs.completion); + intr->read_regs.cr_int_addr = cpu_to_le16(usb_addr(usb, CR_INTERRUPT)); +} + +static inline void init_usb_rx(struct zd_usb *usb) +{ + struct zd_usb_rx *rx = &usb->rx; + spin_lock_init(&rx->lock); + if (interface_to_usbdev(usb->intf)->speed == USB_SPEED_HIGH) { + rx->usb_packet_size = 512; + } else { + rx->usb_packet_size = 64; + } + ZD_ASSERT(rx->fragment_length == 0); +} + +static inline void init_usb_tx(struct zd_usb *usb) +{ + /* FIXME: at this point we will allocate a fixed number of urb's for + * use in a cyclic scheme */ +} + +void zd_usb_init(struct zd_usb *usb, struct net_device *netdev, + struct usb_interface *intf) +{ + memset(usb, 0, sizeof(*usb)); + usb->intf = usb_get_intf(intf); + usb_set_intfdata(usb->intf, netdev); + init_usb_interrupt(usb); + init_usb_tx(usb); + init_usb_rx(usb); +} + +int zd_usb_init_hw(struct zd_usb *usb) +{ + int r; + struct zd_chip *chip = zd_usb_to_chip(usb); + + ZD_ASSERT(mutex_is_locked(&chip->mutex)); + r = zd_ioread16_locked(chip, &usb->fw_base_offset, + USB_REG((u16)FW_BASE_ADDR_OFFSET)); + if (r) + return r; + dev_dbg_f(zd_usb_dev(usb), "fw_base_offset: %#06hx\n", + usb->fw_base_offset); + + return 0; +} + +void zd_usb_clear(struct zd_usb *usb) +{ + usb_set_intfdata(usb->intf, NULL); + usb_put_intf(usb->intf); + memset(usb, 0, sizeof(*usb)); + /* FIXME: usb_interrupt, usb_tx, usb_rx? */ +} + +static const char *speed(enum usb_device_speed speed) +{ + switch (speed) { + case USB_SPEED_LOW: + return "low"; + case USB_SPEED_FULL: + return "full"; + case USB_SPEED_HIGH: + return "high"; + default: + return "unknown speed"; + } +} + +static int scnprint_id(struct usb_device *udev, char *buffer, size_t size) +{ + return scnprintf(buffer, size, "%04hx:%04hx v%04hx %s", + le16_to_cpu(udev->descriptor.idVendor), + le16_to_cpu(udev->descriptor.idProduct), + get_bcdDevice(udev), + speed(udev->speed)); +} + +int zd_usb_scnprint_id(struct zd_usb *usb, char *buffer, size_t size) +{ + struct usb_device *udev = interface_to_usbdev(usb->intf); + return scnprint_id(udev, buffer, size); +} + +#ifdef DEBUG +static void print_id(struct usb_device *udev) +{ + char buffer[40]; + + scnprint_id(udev, buffer, sizeof(buffer)); + buffer[sizeof(buffer)-1] = 0; + dev_dbg_f(&udev->dev, "%s\n", buffer); +} +#else +#define print_id(udev) do { } while (0) +#endif + +static int probe(struct usb_interface *intf, const struct usb_device_id *id) +{ + int r; + struct usb_device *udev = interface_to_usbdev(intf); + struct net_device *netdev = NULL; + + print_id(udev); + + switch (udev->speed) { + case USB_SPEED_LOW: + case USB_SPEED_FULL: + case USB_SPEED_HIGH: + break; + default: + dev_dbg_f(&intf->dev, "Unknown USB speed\n"); + r = -ENODEV; + goto error; + } + + netdev = zd_netdev_alloc(intf); + if (netdev == NULL) { + r = -ENOMEM; + goto error; + } + + r = upload_firmware(udev, id->driver_info); + if (r) { + dev_err(&intf->dev, + "couldn't load firmware. Error number %d\n", r); + goto error; + } + + r = usb_reset_configuration(udev); + if (r) { + dev_dbg_f(&intf->dev, + "couldn't reset configuration. Error number %d\n", r); + goto error; + } + + /* At this point the interrupt endpoint is not generally enabled. We + * save the USB bandwidth until the network device is opened. But + * notify that the initialization of the MAC will require the + * interrupts to be temporary enabled. + */ + r = zd_mac_init_hw(zd_netdev_mac(netdev), id->driver_info); + if (r) { + dev_dbg_f(&intf->dev, + "couldn't initialize mac. Error number %d\n", r); + goto error; + } + + r = register_netdev(netdev); + if (r) { + dev_dbg_f(&intf->dev, + "couldn't register netdev. Error number %d\n", r); + goto error; + } + + dev_dbg_f(&intf->dev, "successful\n"); + dev_info(&intf->dev,"%s\n", netdev->name); + return 0; +error: + usb_reset_device(interface_to_usbdev(intf)); + zd_netdev_free(netdev); + return r; +} + +static void disconnect(struct usb_interface *intf) +{ + struct net_device *netdev = zd_intf_to_netdev(intf); + struct zd_mac *mac = zd_netdev_mac(netdev); + struct zd_usb *usb = &mac->chip.usb; + + dev_dbg_f(zd_usb_dev(usb), "\n"); + + zd_netdev_disconnect(netdev); + + /* Just in case something has gone wrong! */ + zd_usb_disable_rx(usb); + zd_usb_disable_int(usb); + + /* If the disconnect has been caused by a removal of the + * driver module, the reset allows reloading of the driver. If the + * reset will not be executed here, the upload of the firmware in the + * probe function caused by the reloading of the driver will fail. + */ + usb_reset_device(interface_to_usbdev(intf)); + + /* If somebody still waits on this lock now, this is an error. */ + zd_netdev_free(netdev); + dev_dbg(&intf->dev, "disconnected\n"); +} + +static struct usb_driver driver = { + .name = "zd1211rw", + .id_table = usb_ids, + .probe = probe, + .disconnect = disconnect, +}; + +static int __init usb_init(void) +{ + int r; + + pr_debug("usb_init()\n"); + + r = usb_register(&driver); + if (r) { + printk(KERN_ERR "usb_register() failed. Error number %d\n", r); + return r; + } + + pr_debug("zd1211rw initialized\n"); + return 0; +} + +static void __exit usb_exit(void) +{ + pr_debug("usb_exit()\n"); + usb_deregister(&driver); +} + +module_init(usb_init); +module_exit(usb_exit); + +static int usb_int_regs_length(unsigned int count) +{ + return sizeof(struct usb_int_regs) + count * sizeof(struct reg_data); +} + +static void prepare_read_regs_int(struct zd_usb *usb) +{ + struct zd_usb_interrupt *intr = &usb->intr; + + spin_lock(&intr->lock); + intr->read_regs_enabled = 1; + INIT_COMPLETION(intr->read_regs.completion); + spin_unlock(&intr->lock); +} + +static int get_results(struct zd_usb *usb, u16 *values, + struct usb_req_read_regs *req, unsigned int count) +{ + int r; + int i; + struct zd_usb_interrupt *intr = &usb->intr; + struct read_regs_int *rr = &intr->read_regs; + struct usb_int_regs *regs = (struct usb_int_regs *)rr->buffer; + + spin_lock(&intr->lock); + + r = -EIO; + /* The created block size seems to be larger than expected. + * However results appear to be correct. + */ + if (rr->length < usb_int_regs_length(count)) { + dev_dbg_f(zd_usb_dev(usb), + "error: actual length %d less than expected %d\n", + rr->length, usb_int_regs_length(count)); + goto error_unlock; + } + if (rr->length > sizeof(rr->buffer)) { + dev_dbg_f(zd_usb_dev(usb), + "error: actual length %d exceeds buffer size %zu\n", + rr->length, sizeof(rr->buffer)); + goto error_unlock; + } + + for (i = 0; i < count; i++) { + struct reg_data *rd = ®s->regs[i]; + if (rd->addr != req->addr[i]) { + dev_dbg_f(zd_usb_dev(usb), + "rd[%d] addr %#06hx expected %#06hx\n", i, + le16_to_cpu(rd->addr), + le16_to_cpu(req->addr[i])); + goto error_unlock; + } + values[i] = le16_to_cpu(rd->value); + } + + r = 0; +error_unlock: + spin_unlock(&intr->lock); + return r; +} + +int zd_usb_ioread16v(struct zd_usb *usb, u16 *values, + const zd_addr_t *addresses, unsigned int count) +{ + int r; + int i, req_len, actual_req_len; + struct usb_device *udev; + struct usb_req_read_regs *req = NULL; + unsigned long timeout; + + if (count < 1) { + dev_dbg_f(zd_usb_dev(usb), "error: count is zero\n"); + return -EINVAL; + } + if (count > USB_MAX_IOREAD16_COUNT) { + dev_dbg_f(zd_usb_dev(usb), + "error: count %u exceeds possible max %u\n", + count, USB_MAX_IOREAD16_COUNT); + return -EINVAL; + } + if (in_atomic()) { + dev_dbg_f(zd_usb_dev(usb), + "error: io in atomic context not supported\n"); + return -EWOULDBLOCK; + } + if (!usb_int_enabled(usb)) { + dev_dbg_f(zd_usb_dev(usb), + "error: usb interrupt not enabled\n"); + return -EWOULDBLOCK; + } + + req_len = sizeof(struct usb_req_read_regs) + count * sizeof(__le16); + req = kmalloc(req_len, GFP_NOFS); + if (!req) + return -ENOMEM; + req->id = cpu_to_le16(USB_REQ_READ_REGS); + for (i = 0; i < count; i++) + req->addr[i] = cpu_to_le16(usb_addr(usb, addresses[i])); + + udev = zd_usb_to_usbdev(usb); + prepare_read_regs_int(usb); + r = usb_bulk_msg(udev, usb_sndbulkpipe(udev, EP_REGS_OUT), + req, req_len, &actual_req_len, 1000 /* ms */); + if (r) { + dev_dbg_f(zd_usb_dev(usb), + "error in usb_bulk_msg(). Error number %d\n", r); + goto error; + } + if (req_len != actual_req_len) { + dev_dbg_f(zd_usb_dev(usb), "error in usb_bulk_msg()\n" + " req_len %d != actual_req_len %d\n", + req_len, actual_req_len); + r = -EIO; + goto error; + } + + timeout = wait_for_completion_timeout(&usb->intr.read_regs.completion, + msecs_to_jiffies(1000)); + if (!timeout) { + disable_read_regs_int(usb); + dev_dbg_f(zd_usb_dev(usb), "read timed out\n"); + r = -ETIMEDOUT; + goto error; + } + + r = get_results(usb, values, req, count); +error: + kfree(req); + return r; +} + +int zd_usb_iowrite16v(struct zd_usb *usb, const struct zd_ioreq16 *ioreqs, + unsigned int count) +{ + int r; + struct usb_device *udev; + struct usb_req_write_regs *req = NULL; + int i, req_len, actual_req_len; + + if (count == 0) + return 0; + if (count > USB_MAX_IOWRITE16_COUNT) { + dev_dbg_f(zd_usb_dev(usb), + "error: count %u exceeds possible max %u\n", + count, USB_MAX_IOWRITE16_COUNT); + return -EINVAL; + } + if (in_atomic()) { + dev_dbg_f(zd_usb_dev(usb), + "error: io in atomic context not supported\n"); + return -EWOULDBLOCK; + } + + req_len = sizeof(struct usb_req_write_regs) + + count * sizeof(struct reg_data); + req = kmalloc(req_len, GFP_NOFS); + if (!req) + return -ENOMEM; + + req->id = cpu_to_le16(USB_REQ_WRITE_REGS); + for (i = 0; i < count; i++) { + struct reg_data *rw = &req->reg_writes[i]; + rw->addr = cpu_to_le16(usb_addr(usb, ioreqs[i].addr)); + rw->value = cpu_to_le16(ioreqs[i].value); + } + + udev = zd_usb_to_usbdev(usb); + r = usb_bulk_msg(udev, usb_sndbulkpipe(udev, EP_REGS_OUT), + req, req_len, &actual_req_len, 1000 /* ms */); + if (r) { + dev_dbg_f(zd_usb_dev(usb), + "error in usb_bulk_msg(). Error number %d\n", r); + goto error; + } + if (req_len != actual_req_len) { + dev_dbg_f(zd_usb_dev(usb), + "error in usb_bulk_msg()" + " req_len %d != actual_req_len %d\n", + req_len, actual_req_len); + r = -EIO; + goto error; + } + + /* FALL-THROUGH with r == 0 */ +error: + kfree(req); + return r; +} + +int zd_usb_rfwrite(struct zd_usb *usb, u32 value, u8 bits) +{ + int r; + struct usb_device *udev; + struct usb_req_rfwrite *req = NULL; + int i, req_len, actual_req_len; + u16 bit_value_template; + + if (in_atomic()) { + dev_dbg_f(zd_usb_dev(usb), + "error: io in atomic context not supported\n"); + return -EWOULDBLOCK; + } + if (bits < USB_MIN_RFWRITE_BIT_COUNT) { + dev_dbg_f(zd_usb_dev(usb), + "error: bits %d are smaller than" + " USB_MIN_RFWRITE_BIT_COUNT %d\n", + bits, USB_MIN_RFWRITE_BIT_COUNT); + return -EINVAL; + } + if (bits > USB_MAX_RFWRITE_BIT_COUNT) { + dev_dbg_f(zd_usb_dev(usb), + "error: bits %d exceed USB_MAX_RFWRITE_BIT_COUNT %d\n", + bits, USB_MAX_RFWRITE_BIT_COUNT); + return -EINVAL; + } +#ifdef DEBUG + if (value & (~0UL << bits)) { + dev_dbg_f(zd_usb_dev(usb), + "error: value %#09x has bits >= %d set\n", + value, bits); + return -EINVAL; + } +#endif /* DEBUG */ + + dev_dbg_f(zd_usb_dev(usb), "value %#09x bits %d\n", value, bits); + + r = zd_usb_ioread16(usb, &bit_value_template, CR203); + if (r) { + dev_dbg_f(zd_usb_dev(usb), + "error %d: Couldn't read CR203\n", r); + goto out; + } + bit_value_template &= ~(RF_IF_LE|RF_CLK|RF_DATA); + + req_len = sizeof(struct usb_req_rfwrite) + bits * sizeof(__le16); + req = kmalloc(req_len, GFP_NOFS); + if (!req) + return -ENOMEM; + + req->id = cpu_to_le16(USB_REQ_WRITE_RF); + /* 1: 3683a, but not used in ZYDAS driver */ + req->value = cpu_to_le16(2); + req->bits = cpu_to_le16(bits); + + for (i = 0; i < bits; i++) { + u16 bv = bit_value_template; + if (value & (1 << (bits-1-i))) + bv |= RF_DATA; + req->bit_values[i] = cpu_to_le16(bv); + } + + udev = zd_usb_to_usbdev(usb); + r = usb_bulk_msg(udev, usb_sndbulkpipe(udev, EP_REGS_OUT), + req, req_len, &actual_req_len, 1000 /* ms */); + if (r) { + dev_dbg_f(zd_usb_dev(usb), + "error in usb_bulk_msg(). Error number %d\n", r); + goto out; + } + if (req_len != actual_req_len) { + dev_dbg_f(zd_usb_dev(usb), "error in usb_bulk_msg()" + " req_len %d != actual_req_len %d\n", + req_len, actual_req_len); + r = -EIO; + goto out; + } + + /* FALL-THROUGH with r == 0 */ +out: + kfree(req); + return r; +} diff --git a/drivers/net/wireless/zd1211rw/zd_usb.h b/drivers/net/wireless/zd1211rw/zd_usb.h new file mode 100644 index 00000000000..d6420283bd5 --- /dev/null +++ b/drivers/net/wireless/zd1211rw/zd_usb.h @@ -0,0 +1,240 @@ +/* zd_usb.h: Header for USB interface implemented by ZD1211 chip + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#ifndef _ZD_USB_H +#define _ZD_USB_H + +#include +#include +#include +#include +#include + +#include "zd_def.h" +#include "zd_types.h" + +enum devicetype { + DEVICE_ZD1211 = 0, + DEVICE_ZD1211B = 1, +}; + +enum endpoints { + EP_CTRL = 0, + EP_DATA_OUT = 1, + EP_DATA_IN = 2, + EP_INT_IN = 3, + EP_REGS_OUT = 4, +}; + +enum { + USB_MAX_TRANSFER_SIZE = 4096, /* bytes */ + /* FIXME: The original driver uses this value. We have to check, + * whether the MAX_TRANSFER_SIZE is sufficient and this needs only be + * used if one combined frame is split over two USB transactions. + */ + USB_MAX_RX_SIZE = 4800, /* bytes */ + USB_MAX_IOWRITE16_COUNT = 15, + USB_MAX_IOWRITE32_COUNT = USB_MAX_IOWRITE16_COUNT/2, + USB_MAX_IOREAD16_COUNT = 15, + USB_MAX_IOREAD32_COUNT = USB_MAX_IOREAD16_COUNT/2, + USB_MIN_RFWRITE_BIT_COUNT = 16, + USB_MAX_RFWRITE_BIT_COUNT = 28, + USB_MAX_EP_INT_BUFFER = 64, + USB_ZD1211B_BCD_DEVICE = 0x4810, +}; + +enum control_requests { + USB_REQ_WRITE_REGS = 0x21, + USB_REQ_READ_REGS = 0x22, + USB_REQ_WRITE_RF = 0x23, + USB_REQ_PROG_FLASH = 0x24, + USB_REQ_EEPROM_START = 0x0128, /* ? request is a byte */ + USB_REQ_EEPROM_MID = 0x28, + USB_REQ_EEPROM_END = 0x0228, /* ? request is a byte */ + USB_REQ_FIRMWARE_DOWNLOAD = 0x30, + USB_REQ_FIRMWARE_CONFIRM = 0x31, + USB_REQ_FIRMWARE_READ_DATA = 0x32, +}; + +struct usb_req_read_regs { + __le16 id; + __le16 addr[0]; +} __attribute__((packed)); + +struct reg_data { + __le16 addr; + __le16 value; +} __attribute__((packed)); + +struct usb_req_write_regs { + __le16 id; + struct reg_data reg_writes[0]; +} __attribute__((packed)); + +enum { + RF_IF_LE = 0x02, + RF_CLK = 0x04, + RF_DATA = 0x08, +}; + +struct usb_req_rfwrite { + __le16 id; + __le16 value; + /* 1: 3683a */ + /* 2: other (default) */ + __le16 bits; + /* RF2595: 24 */ + __le16 bit_values[0]; + /* (CR203 & ~(RF_IF_LE | RF_CLK | RF_DATA)) | (bit ? RF_DATA : 0) */ +} __attribute__((packed)); + +/* USB interrupt */ + +enum usb_int_id { + USB_INT_TYPE = 0x01, + USB_INT_ID_REGS = 0x90, + USB_INT_ID_RETRY_FAILED = 0xa0, +}; + +enum usb_int_flags { + USB_INT_READ_REGS_EN = 0x01, +}; + +struct usb_int_header { + u8 type; /* must always be 1 */ + u8 id; +} __attribute__((packed)); + +struct usb_int_regs { + struct usb_int_header hdr; + struct reg_data regs[0]; +} __attribute__((packed)); + +struct usb_int_retry_fail { + struct usb_int_header hdr; + u8 new_rate; + u8 _dummy; + u8 addr[ETH_ALEN]; + u8 ibss_wakeup_dest; +} __attribute__((packed)); + +struct read_regs_int { + struct completion completion; + /* Stores the USB int structure and contains the USB address of the + * first requested register before request. + */ + u8 buffer[USB_MAX_EP_INT_BUFFER]; + int length; + __le16 cr_int_addr; +}; + +struct zd_ioreq16 { + zd_addr_t addr; + u16 value; +}; + +struct zd_ioreq32 { + zd_addr_t addr; + u32 value; +}; + +struct zd_usb_interrupt { + struct read_regs_int read_regs; + spinlock_t lock; + struct urb *urb; + int interval; + u8 read_regs_enabled:1; +}; + +static inline struct usb_int_regs *get_read_regs(struct zd_usb_interrupt *intr) +{ + return (struct usb_int_regs *)intr->read_regs.buffer; +} + +#define URBS_COUNT 5 + +struct zd_usb_rx { + spinlock_t lock; + u8 fragment[2*USB_MAX_RX_SIZE]; + unsigned int fragment_length; + unsigned int usb_packet_size; + struct urb **urbs; + int urbs_count; +}; + +struct zd_usb_tx { + spinlock_t lock; +}; + +/* Contains the usb parts. The structure doesn't require a lock, because intf + * and fw_base_offset, will not be changed after initialization. + */ +struct zd_usb { + struct zd_usb_interrupt intr; + struct zd_usb_rx rx; + struct zd_usb_tx tx; + struct usb_interface *intf; + u16 fw_base_offset; +}; + +#define zd_usb_dev(usb) (&usb->intf->dev) + +static inline struct usb_device *zd_usb_to_usbdev(struct zd_usb *usb) +{ + return interface_to_usbdev(usb->intf); +} + +static inline struct net_device *zd_intf_to_netdev(struct usb_interface *intf) +{ + return usb_get_intfdata(intf); +} + +static inline struct net_device *zd_usb_to_netdev(struct zd_usb *usb) +{ + return zd_intf_to_netdev(usb->intf); +} + +void zd_usb_init(struct zd_usb *usb, struct net_device *netdev, + struct usb_interface *intf); +int zd_usb_init_hw(struct zd_usb *usb); +void zd_usb_clear(struct zd_usb *usb); + +int zd_usb_scnprint_id(struct zd_usb *usb, char *buffer, size_t size); + +int zd_usb_enable_int(struct zd_usb *usb); +void zd_usb_disable_int(struct zd_usb *usb); + +int zd_usb_enable_rx(struct zd_usb *usb); +void zd_usb_disable_rx(struct zd_usb *usb); + +int zd_usb_tx(struct zd_usb *usb, const u8 *frame, unsigned int length); + +int zd_usb_ioread16v(struct zd_usb *usb, u16 *values, + const zd_addr_t *addresses, unsigned int count); + +static inline int zd_usb_ioread16(struct zd_usb *usb, u16 *value, + const zd_addr_t addr) +{ + return zd_usb_ioread16v(usb, value, (const zd_addr_t *)&addr, 1); +} + +int zd_usb_iowrite16v(struct zd_usb *usb, const struct zd_ioreq16 *ioreqs, + unsigned int count); + +int zd_usb_rfwrite(struct zd_usb *usb, u32 value, u8 bits); + +#endif /* _ZD_USB_H */ diff --git a/drivers/net/wireless/zd1211rw/zd_util.c b/drivers/net/wireless/zd1211rw/zd_util.c new file mode 100644 index 00000000000..d20036c15d1 --- /dev/null +++ b/drivers/net/wireless/zd1211rw/zd_util.c @@ -0,0 +1,82 @@ +/* zd_util.c + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + * Utility program + */ + +#include "zd_def.h" +#include "zd_util.h" + +#ifdef DEBUG +static char hex(u8 v) +{ + v &= 0xf; + return (v < 10 ? '0' : 'a' - 10) + v; +} + +static char hex_print(u8 c) +{ + return (0x20 <= c && c < 0x7f) ? c : '.'; +} + +static void dump_line(const u8 *bytes, size_t size) +{ + char c; + size_t i; + + size = size <= 8 ? size : 8; + printk(KERN_DEBUG "zd1211 %p ", bytes); + for (i = 0; i < 8; i++) { + switch (i) { + case 1: + case 5: + c = '.'; + break; + case 3: + c = ':'; + break; + default: + c = ' '; + } + if (i < size) { + printk("%c%c%c", hex(bytes[i] >> 4), hex(bytes[i]), c); + } else { + printk(" %c", c); + } + } + + for (i = 0; i < size; i++) + printk("%c", hex_print(bytes[i])); + printk("\n"); +} + +void zd_hexdump(const void *bytes, size_t size) +{ + size_t i = 0; + + do { + dump_line((u8 *)bytes + i, size-i); + i += 8; + } while (i < size); +} +#endif /* DEBUG */ + +void *zd_tail(const void *buffer, size_t buffer_size, size_t tail_size) +{ + if (buffer_size < tail_size) + return NULL; + return (u8 *)buffer + (buffer_size - tail_size); +} diff --git a/drivers/net/wireless/zd1211rw/zd_util.h b/drivers/net/wireless/zd1211rw/zd_util.h new file mode 100644 index 00000000000..ce26f7adea9 --- /dev/null +++ b/drivers/net/wireless/zd1211rw/zd_util.h @@ -0,0 +1,29 @@ +/* zd_util.h + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#ifndef _ZD_UTIL_H +#define _ZD_UTIL_H + +void *zd_tail(const void *buffer, size_t buffer_size, size_t tail_size); + +#ifdef DEBUG +void zd_hexdump(const void *bytes, size_t size); +#else +#define zd_hexdump(bytes, size) +#endif /* DEBUG */ + +#endif /* _ZD_UTIL_H */ -- cgit v1.2.3-70-g09d2 From c9a4b35df9a5e24065e2dd80aa18a381da62339d Mon Sep 17 00:00:00 2001 From: Daniel Drake Date: Sun, 11 Jun 2006 23:18:54 +0100 Subject: [PATCH] zd1211rw: disable TX queue during stop This avoids some potential races. Signed-off-by: Daniel Drake Signed-off-by: John W. Linville --- drivers/net/wireless/zd1211rw/zd_mac.c | 2 ++ 1 file changed, 2 insertions(+) (limited to 'drivers/net') diff --git a/drivers/net/wireless/zd1211rw/zd_mac.c b/drivers/net/wireless/zd1211rw/zd_mac.c index bbe067ec7de..3bdc54d128d 100644 --- a/drivers/net/wireless/zd1211rw/zd_mac.c +++ b/drivers/net/wireless/zd1211rw/zd_mac.c @@ -197,6 +197,8 @@ int zd_mac_stop(struct net_device *netdev) struct zd_mac *mac = zd_netdev_mac(netdev); struct zd_chip *chip = &mac->chip; + netif_stop_queue(netdev); + /* * The order here deliberately is a little different from the open() * method, since we need to make sure there is no opportunity for RX -- cgit v1.2.3-70-g09d2 From 0c639b31068e8e111ec330a3634d95e20c11aab6 Mon Sep 17 00:00:00 2001 From: Kim Phillips Date: Wed, 28 Jun 2006 21:13:23 -0500 Subject: [PATCH] Add support for the Cicada 8201 PHY Add support for the Cicada 8201 PHY, a.k.a Vitesse VSC8201. This PHY is present on the MPC8349mITX. Signed-off-by: Kim Phillips Signed-off-by: Andy Fleming Signed-off-by: Jeff Garzik --- drivers/net/phy/cicada.c | 42 ++++++++++++++++++++++++++++++++++++------ 1 file changed, 36 insertions(+), 6 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/phy/cicada.c b/drivers/net/phy/cicada.c index 3efb715c28d..ae60e6e4107 100644 --- a/drivers/net/phy/cicada.c +++ b/drivers/net/phy/cicada.c @@ -103,7 +103,22 @@ static int cis820x_config_intr(struct phy_device *phydev) return err; } -/* Cicada 820x */ +/* Cicada 8201, a.k.a Vitesse VSC8201 */ +static struct phy_driver cis8201_driver = { + .phy_id = 0x000fc410, + .name = "Cicada Cis8201", + .phy_id_mask = 0x000ffff0, + .features = PHY_GBIT_FEATURES, + .flags = PHY_HAS_INTERRUPT, + .config_init = &cis820x_config_init, + .config_aneg = &genphy_config_aneg, + .read_status = &genphy_read_status, + .ack_interrupt = &cis820x_ack_interrupt, + .config_intr = &cis820x_config_intr, + .driver = { .owner = THIS_MODULE,}, +}; + +/* Cicada 8204 */ static struct phy_driver cis8204_driver = { .phy_id = 0x000fc440, .name = "Cicada Cis8204", @@ -118,15 +133,30 @@ static struct phy_driver cis8204_driver = { .driver = { .owner = THIS_MODULE,}, }; -static int __init cis8204_init(void) +static int __init cicada_init(void) { - return phy_driver_register(&cis8204_driver); + int ret; + + ret = phy_driver_register(&cis8204_driver); + if (ret) + goto err1; + + ret = phy_driver_register(&cis8201_driver); + if (ret) + goto err2; + return 0; + +err2: + phy_driver_unregister(&cis8204_driver); +err1: + return ret; } -static void __exit cis8204_exit(void) +static void __exit cicada_exit(void) { phy_driver_unregister(&cis8204_driver); + phy_driver_unregister(&cis8201_driver); } -module_init(cis8204_init); -module_exit(cis8204_exit); +module_init(cicada_init); +module_exit(cicada_exit); -- cgit v1.2.3-70-g09d2 From dcaf9769801ff49268f5a7a8376045e251700dcf Mon Sep 17 00:00:00 2001 From: Don Fry Date: Thu, 29 Jun 2006 13:52:29 -0700 Subject: [PATCH] pcnet32: Fix Section mismatch error Fix Section mismatch error. Tested ia32 and ppc64. Signed-off-by: Don Fry Signed-off-by: Jeff Garzik --- drivers/net/pcnet32.c | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/pcnet32.c b/drivers/net/pcnet32.c index d768f3d1ac2..5d9be50fd98 100644 --- a/drivers/net/pcnet32.c +++ b/drivers/net/pcnet32.c @@ -277,7 +277,6 @@ struct pcnet32_private { u32 phymask; }; -static void pcnet32_probe_vlbus(void); static int pcnet32_probe_pci(struct pci_dev *, const struct pci_device_id *); static int pcnet32_probe1(unsigned long, int, struct pci_dev *); static int pcnet32_open(struct net_device *); @@ -952,7 +951,7 @@ static struct ethtool_ops pcnet32_ethtool_ops = { /* only probes for non-PCI devices, the rest are handled by * pci_register_driver via pcnet32_probe_pci */ -static void __devinit pcnet32_probe_vlbus(void) +static void __devinit pcnet32_probe_vlbus(unsigned int *pcnet32_portlist) { unsigned int *port, ioaddr; @@ -2730,7 +2729,7 @@ static int __init pcnet32_init_module(void) /* should we find any remaining VLbus devices ? */ if (pcnet32vlb) - pcnet32_probe_vlbus(); + pcnet32_probe_vlbus(pcnet32_portlist); if (cards_found && (pcnet32_debug & NETIF_MSG_PROBE)) printk(KERN_INFO PFX "%d cards_found.\n", cards_found); -- cgit v1.2.3-70-g09d2 From f2622a2b16f27d0087c913115dc15ee70797d58b Mon Sep 17 00:00:00 2001 From: Don Fry Date: Thu, 29 Jun 2006 13:52:58 -0700 Subject: [PATCH] pcnet32: Use PCI_DEVICE macro Jon Mason wrote on Thu, 12 Jan 2006 17:07:49 -0600: This patch adds the PCI_DEVICE macro to the pcnet32 driver. This has been tested on my opteron with my "trident" adapter. Don Fry modified it slightly and tested on ia32 and ppc64. Signed-off-by: Jon Mason Signed-off-by: Don Fry Signed-off-by: Jeff Garzik --- drivers/net/pcnet32.c | 11 ++++------- 1 file changed, 4 insertions(+), 7 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/pcnet32.c b/drivers/net/pcnet32.c index 5d9be50fd98..971bd6e91e4 100644 --- a/drivers/net/pcnet32.c +++ b/drivers/net/pcnet32.c @@ -58,18 +58,15 @@ static const char *const version = * PCI device identifiers for "new style" Linux PCI Device Drivers */ static struct pci_device_id pcnet32_pci_tbl[] = { - { PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_LANCE_HOME, - PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, - { PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_LANCE, - PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, + { PCI_DEVICE(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_LANCE_HOME), }, + { PCI_DEVICE(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_LANCE), }, /* * Adapters that were sold with IBM's RS/6000 or pSeries hardware have * the incorrect vendor id. */ - { PCI_VENDOR_ID_TRIDENT, PCI_DEVICE_ID_AMD_LANCE, - PCI_ANY_ID, PCI_ANY_ID, - PCI_CLASS_NETWORK_ETHERNET << 8, 0xffff00, 0}, + { PCI_DEVICE(PCI_VENDOR_ID_TRIDENT, PCI_DEVICE_ID_AMD_LANCE), + .class = (PCI_CLASS_NETWORK_ETHERNET << 8), .class_mask = 0xffff00, }, { } /* terminate list */ }; -- cgit v1.2.3-70-g09d2 From 6dcd60c2c78ca87163730472ddea6aa1a7754b61 Mon Sep 17 00:00:00 2001 From: Don Fry Date: Thu, 29 Jun 2006 13:53:23 -0700 Subject: [PATCH] pcnet32: Fix off-by-one in get_ringparam Fix off-by-one in pcnet32_get_ringparam Signed-off-by: Don Fry Signed-off-by: Jeff Garzik --- drivers/net/pcnet32.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/pcnet32.c b/drivers/net/pcnet32.c index 971bd6e91e4..5fcd4d94871 100644 --- a/drivers/net/pcnet32.c +++ b/drivers/net/pcnet32.c @@ -515,10 +515,10 @@ static void pcnet32_get_ringparam(struct net_device *dev, { struct pcnet32_private *lp = dev->priv; - ering->tx_max_pending = TX_MAX_RING_SIZE - 1; - ering->tx_pending = lp->tx_ring_size - 1; - ering->rx_max_pending = RX_MAX_RING_SIZE - 1; - ering->rx_pending = lp->rx_ring_size - 1; + ering->tx_max_pending = TX_MAX_RING_SIZE; + ering->tx_pending = lp->tx_ring_size; + ering->rx_max_pending = RX_MAX_RING_SIZE; + ering->rx_pending = lp->rx_ring_size; } static int pcnet32_set_ringparam(struct net_device *dev, -- cgit v1.2.3-70-g09d2 From 12fa30f35b52e85b4c37a2ef3c3320c158d510fa Mon Sep 17 00:00:00 2001 From: Don Fry Date: Thu, 29 Jun 2006 13:53:48 -0700 Subject: [PATCH] pcnet32: Use kcalloc instead of kmalloc and memset On 2006-03-08 Eric Sesterhenn wrote: converts drivers/net to kzalloc usage. Don Fry modified it to use netif_msg_drv. Tested ia32 and ppc64. Signed-off-by: Eric Sesterhenn Signed-off-by: Don Fry Signed-off-by: Jeff Garzik --- drivers/net/pcnet32.c | 24 ++++++++++-------------- 1 file changed, 10 insertions(+), 14 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/pcnet32.c b/drivers/net/pcnet32.c index 5fcd4d94871..f89b7a1e24d 100644 --- a/drivers/net/pcnet32.c +++ b/drivers/net/pcnet32.c @@ -1432,7 +1432,7 @@ static int pcnet32_alloc_ring(struct net_device *dev, char *name) lp->tx_ring_size, &lp->tx_ring_dma_addr); if (lp->tx_ring == NULL) { - if (pcnet32_debug & NETIF_MSG_DRV) + if (netif_msg_drv(lp)) printk("\n" KERN_ERR PFX "%s: Consistent memory allocation failed.\n", name); @@ -1444,52 +1444,48 @@ static int pcnet32_alloc_ring(struct net_device *dev, char *name) lp->rx_ring_size, &lp->rx_ring_dma_addr); if (lp->rx_ring == NULL) { - if (pcnet32_debug & NETIF_MSG_DRV) + if (netif_msg_drv(lp)) printk("\n" KERN_ERR PFX "%s: Consistent memory allocation failed.\n", name); return -ENOMEM; } - lp->tx_dma_addr = kmalloc(sizeof(dma_addr_t) * lp->tx_ring_size, + lp->tx_dma_addr = kcalloc(lp->tx_ring_size, sizeof(dma_addr_t), GFP_ATOMIC); if (!lp->tx_dma_addr) { - if (pcnet32_debug & NETIF_MSG_DRV) + if (netif_msg_drv(lp)) printk("\n" KERN_ERR PFX "%s: Memory allocation failed.\n", name); return -ENOMEM; } - memset(lp->tx_dma_addr, 0, sizeof(dma_addr_t) * lp->tx_ring_size); - lp->rx_dma_addr = kmalloc(sizeof(dma_addr_t) * lp->rx_ring_size, + lp->rx_dma_addr = kcalloc(lp->rx_ring_size, sizeof(dma_addr_t), GFP_ATOMIC); if (!lp->rx_dma_addr) { - if (pcnet32_debug & NETIF_MSG_DRV) + if (netif_msg_drv(lp)) printk("\n" KERN_ERR PFX "%s: Memory allocation failed.\n", name); return -ENOMEM; } - memset(lp->rx_dma_addr, 0, sizeof(dma_addr_t) * lp->rx_ring_size); - lp->tx_skbuff = kmalloc(sizeof(struct sk_buff *) * lp->tx_ring_size, + lp->tx_skbuff = kcalloc(lp->tx_ring_size, sizeof(struct sk_buff *), GFP_ATOMIC); if (!lp->tx_skbuff) { - if (pcnet32_debug & NETIF_MSG_DRV) + if (netif_msg_drv(lp)) printk("\n" KERN_ERR PFX "%s: Memory allocation failed.\n", name); return -ENOMEM; } - memset(lp->tx_skbuff, 0, sizeof(struct sk_buff *) * lp->tx_ring_size); - lp->rx_skbuff = kmalloc(sizeof(struct sk_buff *) * lp->rx_ring_size, + lp->rx_skbuff = kcalloc(lp->rx_ring_size, sizeof(struct sk_buff *), GFP_ATOMIC); if (!lp->rx_skbuff) { - if (pcnet32_debug & NETIF_MSG_DRV) + if (netif_msg_drv(lp)) printk("\n" KERN_ERR PFX "%s: Memory allocation failed.\n", name); return -ENOMEM; } - memset(lp->rx_skbuff, 0, sizeof(struct sk_buff *) * lp->rx_ring_size); return 0; } -- cgit v1.2.3-70-g09d2 From 06c878500893c315795fcf944ecbd85c3d023040 Mon Sep 17 00:00:00 2001 From: Don Fry Date: Thu, 29 Jun 2006 13:54:38 -0700 Subject: [PATCH] pcnet32: Handle memory allocation failures cleanly when resizing tx/rx rings Fix pcnet32_set_ringparam to handle memory allocation errors without leaving the adapter in an inoperative state and null pointers waiting to be dereferenced. Tested ia32 and ppc64. Signed-off-by: Don Fry Signed-off-by: Jeff Garzik --- drivers/net/pcnet32.c | 275 +++++++++++++++++++++++++++++++++++++++++++++----- 1 file changed, 251 insertions(+), 24 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/pcnet32.c b/drivers/net/pcnet32.c index f89b7a1e24d..e79c3b6bee1 100644 --- a/drivers/net/pcnet32.c +++ b/drivers/net/pcnet32.c @@ -185,6 +185,23 @@ static int homepna[MAX_UNITS]; #define PCNET32_TOTAL_SIZE 0x20 +#define CSR0 0 +#define CSR0_INIT 0x1 +#define CSR0_START 0x2 +#define CSR0_STOP 0x4 +#define CSR0_TXPOLL 0x8 +#define CSR0_INTEN 0x40 +#define CSR0_IDON 0x0100 +#define CSR0_NORMAL (CSR0_START | CSR0_INTEN) +#define PCNET32_INIT_LOW 1 +#define PCNET32_INIT_HIGH 2 +#define CSR3 3 +#define CSR4 4 +#define CSR5 5 +#define CSR5_SUSPEND 0x0001 +#define CSR15 15 +#define PCNET32_MC_FILTER 8 + /* The PCNET32 Rx and Tx ring descriptors. */ struct pcnet32_rx_head { u32 base; @@ -415,6 +432,219 @@ static struct pcnet32_access pcnet32_dwio = { .reset = pcnet32_dwio_reset }; +static void pcnet32_netif_stop(struct net_device *dev) +{ + dev->trans_start = jiffies; + netif_poll_disable(dev); + netif_tx_disable(dev); +} + +static void pcnet32_netif_start(struct net_device *dev) +{ + netif_wake_queue(dev); + netif_poll_enable(dev); +} + +/* + * Allocate space for the new sized tx ring. + * Free old resources + * Save new resources. + * Any failure keeps old resources. + * Must be called with lp->lock held. + */ +static void pcnet32_realloc_tx_ring(struct net_device *dev, + struct pcnet32_private *lp, + unsigned int size) +{ + dma_addr_t new_ring_dma_addr; + dma_addr_t *new_dma_addr_list; + struct pcnet32_tx_head *new_tx_ring; + struct sk_buff **new_skb_list; + + pcnet32_purge_tx_ring(dev); + + new_tx_ring = pci_alloc_consistent(lp->pci_dev, + sizeof(struct pcnet32_tx_head) * + (1 << size), + &new_ring_dma_addr); + if (new_tx_ring == NULL) { + if (netif_msg_drv(lp)) + printk("\n" KERN_ERR + "%s: Consistent memory allocation failed.\n", + dev->name); + return; + } + memset(new_tx_ring, 0, sizeof(struct pcnet32_tx_head) * (1 << size)); + + new_dma_addr_list = kcalloc((1 << size), sizeof(dma_addr_t), + GFP_ATOMIC); + if (!new_dma_addr_list) { + if (netif_msg_drv(lp)) + printk("\n" KERN_ERR + "%s: Memory allocation failed.\n", dev->name); + goto free_new_tx_ring; + } + + new_skb_list = kcalloc((1 << size), sizeof(struct sk_buff *), + GFP_ATOMIC); + if (!new_skb_list) { + if (netif_msg_drv(lp)) + printk("\n" KERN_ERR + "%s: Memory allocation failed.\n", dev->name); + goto free_new_lists; + } + + kfree(lp->tx_skbuff); + kfree(lp->tx_dma_addr); + pci_free_consistent(lp->pci_dev, + sizeof(struct pcnet32_tx_head) * + lp->tx_ring_size, lp->tx_ring, + lp->tx_ring_dma_addr); + + lp->tx_ring_size = (1 << size); + lp->tx_mod_mask = lp->tx_ring_size - 1; + lp->tx_len_bits = (size << 12); + lp->tx_ring = new_tx_ring; + lp->tx_ring_dma_addr = new_ring_dma_addr; + lp->tx_dma_addr = new_dma_addr_list; + lp->tx_skbuff = new_skb_list; + return; + + free_new_lists: + kfree(new_dma_addr_list); + free_new_tx_ring: + pci_free_consistent(lp->pci_dev, + sizeof(struct pcnet32_tx_head) * + (1 << size), + new_tx_ring, + new_ring_dma_addr); + return; +} + +/* + * Allocate space for the new sized rx ring. + * Re-use old receive buffers. + * alloc extra buffers + * free unneeded buffers + * free unneeded buffers + * Save new resources. + * Any failure keeps old resources. + * Must be called with lp->lock held. + */ +static void pcnet32_realloc_rx_ring(struct net_device *dev, + struct pcnet32_private *lp, + unsigned int size) +{ + dma_addr_t new_ring_dma_addr; + dma_addr_t *new_dma_addr_list; + struct pcnet32_rx_head *new_rx_ring; + struct sk_buff **new_skb_list; + int new, overlap; + + new_rx_ring = pci_alloc_consistent(lp->pci_dev, + sizeof(struct pcnet32_rx_head) * + (1 << size), + &new_ring_dma_addr); + if (new_rx_ring == NULL) { + if (netif_msg_drv(lp)) + printk("\n" KERN_ERR + "%s: Consistent memory allocation failed.\n", + dev->name); + return; + } + memset(new_rx_ring, 0, sizeof(struct pcnet32_rx_head) * (1 << size)); + + new_dma_addr_list = kcalloc((1 << size), sizeof(dma_addr_t), + GFP_ATOMIC); + if (!new_dma_addr_list) { + if (netif_msg_drv(lp)) + printk("\n" KERN_ERR + "%s: Memory allocation failed.\n", dev->name); + goto free_new_rx_ring; + } + + new_skb_list = kcalloc((1 << size), sizeof(struct sk_buff *), + GFP_ATOMIC); + if (!new_skb_list) { + if (netif_msg_drv(lp)) + printk("\n" KERN_ERR + "%s: Memory allocation failed.\n", dev->name); + goto free_new_lists; + } + + /* first copy the current receive buffers */ + overlap = min(size, lp->rx_ring_size); + for (new = 0; new < overlap; new++) { + new_rx_ring[new] = lp->rx_ring[new]; + new_dma_addr_list[new] = lp->rx_dma_addr[new]; + new_skb_list[new] = lp->rx_skbuff[new]; + } + /* now allocate any new buffers needed */ + for (; new < size; new++ ) { + struct sk_buff *rx_skbuff; + new_skb_list[new] = dev_alloc_skb(PKT_BUF_SZ); + if (!(rx_skbuff = new_skb_list[new])) { + /* keep the original lists and buffers */ + if (netif_msg_drv(lp)) + printk(KERN_ERR + "%s: pcnet32_realloc_rx_ring dev_alloc_skb failed.\n", + dev->name); + goto free_all_new; + } + skb_reserve(rx_skbuff, 2); + + new_dma_addr_list[new] = + pci_map_single(lp->pci_dev, rx_skbuff->data, + PKT_BUF_SZ - 2, PCI_DMA_FROMDEVICE); + new_rx_ring[new].base = (u32) le32_to_cpu(new_dma_addr_list[new]); + new_rx_ring[new].buf_length = le16_to_cpu(2 - PKT_BUF_SZ); + new_rx_ring[new].status = le16_to_cpu(0x8000); + } + /* and free any unneeded buffers */ + for (; new < lp->rx_ring_size; new++) { + if (lp->rx_skbuff[new]) { + pci_unmap_single(lp->pci_dev, lp->rx_dma_addr[new], + PKT_BUF_SZ - 2, PCI_DMA_FROMDEVICE); + dev_kfree_skb(lp->rx_skbuff[new]); + } + } + + kfree(lp->rx_skbuff); + kfree(lp->rx_dma_addr); + pci_free_consistent(lp->pci_dev, + sizeof(struct pcnet32_rx_head) * + lp->rx_ring_size, lp->rx_ring, + lp->rx_ring_dma_addr); + + lp->rx_ring_size = (1 << size); + lp->rx_mod_mask = lp->rx_ring_size - 1; + lp->rx_len_bits = (size << 4); + lp->rx_ring = new_rx_ring; + lp->rx_ring_dma_addr = new_ring_dma_addr; + lp->rx_dma_addr = new_dma_addr_list; + lp->rx_skbuff = new_skb_list; + return; + + free_all_new: + for (; --new >= lp->rx_ring_size; ) { + if (new_skb_list[new]) { + pci_unmap_single(lp->pci_dev, new_dma_addr_list[new], + PKT_BUF_SZ - 2, PCI_DMA_FROMDEVICE); + dev_kfree_skb(new_skb_list[new]); + } + } + kfree(new_skb_list); + free_new_lists: + kfree(new_dma_addr_list); + free_new_rx_ring: + pci_free_consistent(lp->pci_dev, + sizeof(struct pcnet32_rx_head) * + (1 << size), + new_rx_ring, + new_ring_dma_addr); + return; +} + #ifdef CONFIG_NET_POLL_CONTROLLER static void pcnet32_poll_controller(struct net_device *dev) { @@ -526,56 +756,53 @@ static int pcnet32_set_ringparam(struct net_device *dev, { struct pcnet32_private *lp = dev->priv; unsigned long flags; + unsigned int size; + ulong ioaddr = dev->base_addr; int i; if (ering->rx_mini_pending || ering->rx_jumbo_pending) return -EINVAL; if (netif_running(dev)) - pcnet32_close(dev); + pcnet32_netif_stop(dev); spin_lock_irqsave(&lp->lock, flags); - pcnet32_free_ring(dev); - lp->tx_ring_size = - min(ering->tx_pending, (unsigned int)TX_MAX_RING_SIZE); - lp->rx_ring_size = - min(ering->rx_pending, (unsigned int)RX_MAX_RING_SIZE); + lp->a.write_csr(ioaddr, CSR0, CSR0_STOP); /* stop the chip */ + + size = min(ering->tx_pending, (unsigned int)TX_MAX_RING_SIZE); /* set the minimum ring size to 4, to allow the loopback test to work * unchanged. */ for (i = 2; i <= PCNET32_LOG_MAX_TX_BUFFERS; i++) { - if (lp->tx_ring_size <= (1 << i)) + if (size <= (1 << i)) break; } - lp->tx_ring_size = (1 << i); - lp->tx_mod_mask = lp->tx_ring_size - 1; - lp->tx_len_bits = (i << 12); - + if ((1 << i) != lp->tx_ring_size) + pcnet32_realloc_tx_ring(dev, lp, i); + + size = min(ering->rx_pending, (unsigned int)RX_MAX_RING_SIZE); for (i = 2; i <= PCNET32_LOG_MAX_RX_BUFFERS; i++) { - if (lp->rx_ring_size <= (1 << i)) + if (size <= (1 << i)) break; } - lp->rx_ring_size = (1 << i); - lp->rx_mod_mask = lp->rx_ring_size - 1; - lp->rx_len_bits = (i << 4); + if ((1 << i) != lp->rx_ring_size) + pcnet32_realloc_rx_ring(dev, lp, i); + + dev->weight = lp->rx_ring_size / 2; - if (pcnet32_alloc_ring(dev, dev->name)) { - pcnet32_free_ring(dev); - spin_unlock_irqrestore(&lp->lock, flags); - return -ENOMEM; + if (netif_running(dev)) { + pcnet32_netif_start(dev); + pcnet32_restart(dev, CSR0_NORMAL); } spin_unlock_irqrestore(&lp->lock, flags); - if (pcnet32_debug & NETIF_MSG_DRV) - printk(KERN_INFO PFX + if (netif_msg_drv(lp)) + printk(KERN_INFO "%s: Ring Param Settings: RX: %d, TX: %d\n", dev->name, lp->rx_ring_size, lp->tx_ring_size); - if (netif_running(dev)) - pcnet32_open(dev); - return 0; } -- cgit v1.2.3-70-g09d2 From df27f4a610e22e8c8c740286368cc13e0600f22c Mon Sep 17 00:00:00 2001 From: Don Fry Date: Thu, 29 Jun 2006 13:55:02 -0700 Subject: [PATCH] pcnet32: Suspend the chip rather than restart when changing multicast/promisc Suspend the chip if possible rather than stop and discard all tx and rx frames, when changing the mcast list or entering/leaving promiscuous mode. Created common pcnet32_suspend routine. Tested ia32 and ppc64 Signed-off-by: Don Fry Signed-off-by: Jeff Garzik --- drivers/net/pcnet32.c | 95 ++++++++++++++++++++++++++++++++++++--------------- 1 file changed, 68 insertions(+), 27 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/pcnet32.c b/drivers/net/pcnet32.c index e79c3b6bee1..fe055824283 100644 --- a/drivers/net/pcnet32.c +++ b/drivers/net/pcnet32.c @@ -1062,6 +1062,43 @@ static int pcnet32_phys_id(struct net_device *dev, u32 data) return 0; } +/* + * lp->lock must be held. + */ +static int pcnet32_suspend(struct net_device *dev, unsigned long *flags, + int can_sleep) +{ + int csr5; + struct pcnet32_private *lp = dev->priv; + struct pcnet32_access *a = &lp->a; + ulong ioaddr = dev->base_addr; + int ticks; + + /* set SUSPEND (SPND) - CSR5 bit 0 */ + csr5 = a->read_csr(ioaddr, CSR5); + a->write_csr(ioaddr, CSR5, csr5 | CSR5_SUSPEND); + + /* poll waiting for bit to be set */ + ticks = 0; + while (!(a->read_csr(ioaddr, CSR5) & CSR5_SUSPEND)) { + spin_unlock_irqrestore(&lp->lock, *flags); + if (can_sleep) + msleep(1); + else + mdelay(1); + spin_lock_irqsave(&lp->lock, *flags); + ticks++; + if (ticks > 200) { + if (netif_msg_hw(lp)) + printk(KERN_DEBUG + "%s: Error getting into suspend!\n", + dev->name); + return 0; + } + } + return 1; +} + #define PCNET32_REGS_PER_PHY 32 #define PCNET32_MAX_PHYS 32 static int pcnet32_get_regs_len(struct net_device *dev) @@ -1080,32 +1117,13 @@ static void pcnet32_get_regs(struct net_device *dev, struct ethtool_regs *regs, struct pcnet32_private *lp = dev->priv; struct pcnet32_access *a = &lp->a; ulong ioaddr = dev->base_addr; - int ticks; unsigned long flags; spin_lock_irqsave(&lp->lock, flags); - csr0 = a->read_csr(ioaddr, 0); - if (!(csr0 & 0x0004)) { /* If not stopped */ - /* set SUSPEND (SPND) - CSR5 bit 0 */ - a->write_csr(ioaddr, 5, 0x0001); - - /* poll waiting for bit to be set */ - ticks = 0; - while (!(a->read_csr(ioaddr, 5) & 0x0001)) { - spin_unlock_irqrestore(&lp->lock, flags); - mdelay(1); - spin_lock_irqsave(&lp->lock, flags); - ticks++; - if (ticks > 200) { - if (netif_msg_hw(lp)) - printk(KERN_DEBUG - "%s: Error getting into suspend!\n", - dev->name); - break; - } - } - } + csr0 = a->read_csr(ioaddr, CSR0); + if (!(csr0 & CSR0_STOP)) /* If not stopped */ + pcnet32_suspend(dev, &flags, 1); /* read address PROM */ for (i = 0; i < 16; i += 2) @@ -1142,9 +1160,12 @@ static void pcnet32_get_regs(struct net_device *dev, struct ethtool_regs *regs, } } - if (!(csr0 & 0x0004)) { /* If not stopped */ + if (!(csr0 & CSR0_STOP)) { /* If not stopped */ + int csr5; + /* clear SUSPEND (SPND) - CSR5 bit 0 */ - a->write_csr(ioaddr, 5, 0x0000); + csr5 = a->read_csr(ioaddr, CSR5); + a->write_csr(ioaddr, CSR5, csr5 & (~CSR5_SUSPEND)); } spin_unlock_irqrestore(&lp->lock, flags); @@ -2652,6 +2673,7 @@ static void pcnet32_load_multicast(struct net_device *dev) volatile struct pcnet32_init_block *ib = &lp->init_block; volatile u16 *mcast_table = (u16 *) & ib->filter; struct dev_mc_list *dmi = dev->mc_list; + unsigned long ioaddr = dev->base_addr; char *addrs; int i; u32 crc; @@ -2660,6 +2682,10 @@ static void pcnet32_load_multicast(struct net_device *dev) if (dev->flags & IFF_ALLMULTI) { ib->filter[0] = 0xffffffff; ib->filter[1] = 0xffffffff; + lp->a.write_csr(ioaddr, PCNET32_MC_FILTER, 0xffff); + lp->a.write_csr(ioaddr, PCNET32_MC_FILTER+1, 0xffff); + lp->a.write_csr(ioaddr, PCNET32_MC_FILTER+2, 0xffff); + lp->a.write_csr(ioaddr, PCNET32_MC_FILTER+3, 0xffff); return; } /* clear the multicast filter */ @@ -2681,6 +2707,9 @@ static void pcnet32_load_multicast(struct net_device *dev) le16_to_cpu(le16_to_cpu(mcast_table[crc >> 4]) | (1 << (crc & 0xf))); } + for (i = 0; i < 4; i++) + lp->a.write_csr(ioaddr, PCNET32_MC_FILTER + i, + le16_to_cpu(mcast_table[i])); return; } @@ -2691,8 +2720,11 @@ static void pcnet32_set_multicast_list(struct net_device *dev) { unsigned long ioaddr = dev->base_addr, flags; struct pcnet32_private *lp = dev->priv; + int csr15, suspended; spin_lock_irqsave(&lp->lock, flags); + suspended = pcnet32_suspend(dev, &flags, 0); + csr15 = lp->a.read_csr(ioaddr, CSR15); if (dev->flags & IFF_PROMISC) { /* Log any net taps. */ if (netif_msg_hw(lp)) @@ -2701,15 +2733,24 @@ static void pcnet32_set_multicast_list(struct net_device *dev) lp->init_block.mode = le16_to_cpu(0x8000 | (lp->options & PCNET32_PORT_PORTSEL) << 7); + lp->a.write_csr(ioaddr, CSR15, csr15 | 0x8000); } else { lp->init_block.mode = le16_to_cpu((lp->options & PCNET32_PORT_PORTSEL) << 7); + lp->a.write_csr(ioaddr, CSR15, csr15 & 0x7fff); pcnet32_load_multicast(dev); } - lp->a.write_csr(ioaddr, 0, 0x0004); /* Temporarily stop the lance. */ - pcnet32_restart(dev, 0x0042); /* Resume normal operation */ - netif_wake_queue(dev); + if (suspended) { + int csr5; + /* clear SUSPEND (SPND) - CSR5 bit 0 */ + csr5 = lp->a.read_csr(ioaddr, CSR5); + lp->a.write_csr(ioaddr, CSR5, csr5 & (~CSR5_SUSPEND)); + } else { + lp->a.write_csr(ioaddr, CSR0, CSR0_STOP); + pcnet32_restart(dev, CSR0_NORMAL); + netif_wake_queue(dev); + } spin_unlock_irqrestore(&lp->lock, flags); } -- cgit v1.2.3-70-g09d2 From ac5bfe40f94cc8df512d247a5588897b0bc6dbea Mon Sep 17 00:00:00 2001 From: Don Fry Date: Thu, 29 Jun 2006 13:55:27 -0700 Subject: [PATCH] pcnet32: Cleanup rx buffers after loopback test. More cleanup to pcnet32_loopback_test to release receive buffers if device is not up. Created common routine to free rx buffers. Tested ia32 and ppc64 Signed-off-by: Don Fry Signed-off-by: Jeff Garzik --- drivers/net/pcnet32.c | 102 +++++++++++++++++++++----------------------------- 1 file changed, 43 insertions(+), 59 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/pcnet32.c b/drivers/net/pcnet32.c index fe055824283..4daafe30335 100644 --- a/drivers/net/pcnet32.c +++ b/drivers/net/pcnet32.c @@ -645,6 +645,25 @@ static void pcnet32_realloc_rx_ring(struct net_device *dev, return; } +static void pcnet32_purge_rx_ring(struct net_device *dev) +{ + struct pcnet32_private *lp = dev->priv; + int i; + + /* free all allocated skbuffs */ + for (i = 0; i < lp->rx_ring_size; i++) { + lp->rx_ring[i].status = 0; /* CPU owns buffer */ + wmb(); /* Make sure adapter sees owner change */ + if (lp->rx_skbuff[i]) { + pci_unmap_single(lp->pci_dev, lp->rx_dma_addr[i], + PKT_BUF_SZ - 2, PCI_DMA_FROMDEVICE); + dev_kfree_skb_any(lp->rx_skbuff[i]); + } + lp->rx_skbuff[i] = NULL; + lp->rx_dma_addr[i] = 0; + } +} + #ifdef CONFIG_NET_POLL_CONTROLLER static void pcnet32_poll_controller(struct net_device *dev) { @@ -856,29 +875,27 @@ static int pcnet32_loopback_test(struct net_device *dev, uint64_t * data1) unsigned long flags; unsigned long ticks; - *data1 = 1; /* status of test, default to fail */ rc = 1; /* default to fail */ if (netif_running(dev)) pcnet32_close(dev); spin_lock_irqsave(&lp->lock, flags); + lp->a.write_csr(ioaddr, CSR0, CSR0_STOP); /* stop the chip */ + + numbuffs = min(numbuffs, (int)min(lp->rx_ring_size, lp->tx_ring_size)); /* Reset the PCNET32 */ lp->a.reset(ioaddr); + lp->a.write_csr(ioaddr, CSR4, 0x0915); /* switch pcnet32 to 32bit mode */ lp->a.write_bcr(ioaddr, 20, 2); - lp->init_block.mode = - le16_to_cpu((lp->options & PCNET32_PORT_PORTSEL) << 7); - lp->init_block.filter[0] = 0; - lp->init_block.filter[1] = 0; - /* purge & init rings but don't actually restart */ pcnet32_restart(dev, 0x0000); - lp->a.write_csr(ioaddr, 0, 0x0004); /* Set STOP bit */ + lp->a.write_csr(ioaddr, CSR0, CSR0_STOP); /* Set STOP bit */ /* Initialize Transmit buffers. */ size = data_len + 15; @@ -920,14 +937,15 @@ static int pcnet32_loopback_test(struct net_device *dev, uint64_t * data1) } } - x = a->read_bcr(ioaddr, 32); /* set internal loopback in BSR32 */ - x = x | 0x0002; - a->write_bcr(ioaddr, 32, x); + x = a->read_bcr(ioaddr, 32); /* set internal loopback in BCR32 */ + a->write_bcr(ioaddr, 32, x | 0x0002); - lp->a.write_csr(ioaddr, 15, 0x0044); /* set int loopback in CSR15 */ + /* set int loopback in CSR15 */ + x = a->read_csr(ioaddr, CSR15) & 0xfffc; + lp->a.write_csr(ioaddr, CSR15, x | 0x0044); teststatus = le16_to_cpu(0x8000); - lp->a.write_csr(ioaddr, 0, 0x0002); /* Set STRT bit */ + lp->a.write_csr(ioaddr, CSR0, CSR0_START); /* Set STRT bit */ /* Check status of descriptors */ for (x = 0; x < numbuffs; x++) { @@ -935,7 +953,7 @@ static int pcnet32_loopback_test(struct net_device *dev, uint64_t * data1) rmb(); while ((lp->rx_ring[x].status & teststatus) && (ticks < 200)) { spin_unlock_irqrestore(&lp->lock, flags); - mdelay(1); + msleep(1); spin_lock_irqsave(&lp->lock, flags); rmb(); ticks++; @@ -948,7 +966,7 @@ static int pcnet32_loopback_test(struct net_device *dev, uint64_t * data1) } } - lp->a.write_csr(ioaddr, 0, 0x0004); /* Set STOP bit */ + lp->a.write_csr(ioaddr, CSR0, CSR0_STOP); /* Set STOP bit */ wmb(); if (netif_msg_hw(lp) && netif_msg_pktdata(lp)) { printk(KERN_DEBUG "%s: RX loopback packets:\n", dev->name); @@ -981,25 +999,24 @@ static int pcnet32_loopback_test(struct net_device *dev, uint64_t * data1) } x++; } - if (!rc) { - *data1 = 0; - } clean_up: + *data1 = rc; pcnet32_purge_tx_ring(dev); - x = a->read_csr(ioaddr, 15) & 0xFFFF; - a->write_csr(ioaddr, 15, (x & ~0x0044)); /* reset bits 6 and 2 */ - x = a->read_bcr(ioaddr, 32); /* reset internal loopback */ - x = x & ~0x0002; - a->write_bcr(ioaddr, 32, x); + x = a->read_csr(ioaddr, CSR15); + a->write_csr(ioaddr, CSR15, (x & ~0x0044)); /* reset bits 6 and 2 */ - spin_unlock_irqrestore(&lp->lock, flags); + x = a->read_bcr(ioaddr, 32); /* reset internal loopback */ + a->write_bcr(ioaddr, 32, (x & ~0x0002)); if (netif_running(dev)) { + spin_unlock_irqrestore(&lp->lock, flags); pcnet32_open(dev); } else { + pcnet32_purge_rx_ring(dev); lp->a.write_bcr(ioaddr, 20, 4); /* return to 16bit mode */ + spin_unlock_irqrestore(&lp->lock, flags); } return (rc); @@ -1997,16 +2014,7 @@ static int pcnet32_open(struct net_device *dev) err_free_ring: /* free any allocated skbuffs */ - for (i = 0; i < lp->rx_ring_size; i++) { - lp->rx_ring[i].status = 0; - if (lp->rx_skbuff[i]) { - pci_unmap_single(lp->pci_dev, lp->rx_dma_addr[i], - PKT_BUF_SZ - 2, PCI_DMA_FROMDEVICE); - dev_kfree_skb(lp->rx_skbuff[i]); - } - lp->rx_skbuff[i] = NULL; - lp->rx_dma_addr[i] = 0; - } + pcnet32_purge_rx_ring(dev); /* * Switch back to 16bit mode to avoid problems with dumb @@ -2588,7 +2596,6 @@ static int pcnet32_close(struct net_device *dev) { unsigned long ioaddr = dev->base_addr; struct pcnet32_private *lp = dev->priv; - int i; unsigned long flags; del_timer_sync(&lp->watchdog_timer); @@ -2619,31 +2626,8 @@ static int pcnet32_close(struct net_device *dev) spin_lock_irqsave(&lp->lock, flags); - /* free all allocated skbuffs */ - for (i = 0; i < lp->rx_ring_size; i++) { - lp->rx_ring[i].status = 0; - wmb(); /* Make sure adapter sees owner change */ - if (lp->rx_skbuff[i]) { - pci_unmap_single(lp->pci_dev, lp->rx_dma_addr[i], - PKT_BUF_SZ - 2, PCI_DMA_FROMDEVICE); - dev_kfree_skb(lp->rx_skbuff[i]); - } - lp->rx_skbuff[i] = NULL; - lp->rx_dma_addr[i] = 0; - } - - for (i = 0; i < lp->tx_ring_size; i++) { - lp->tx_ring[i].status = 0; /* CPU owns buffer */ - wmb(); /* Make sure adapter sees owner change */ - if (lp->tx_skbuff[i]) { - pci_unmap_single(lp->pci_dev, lp->tx_dma_addr[i], - lp->tx_skbuff[i]->len, - PCI_DMA_TODEVICE); - dev_kfree_skb(lp->tx_skbuff[i]); - } - lp->tx_skbuff[i] = NULL; - lp->tx_dma_addr[i] = 0; - } + pcnet32_purge_rx_ring(dev); + pcnet32_purge_tx_ring(dev); spin_unlock_irqrestore(&lp->lock, flags); -- cgit v1.2.3-70-g09d2 From 3a10ccebe928691d16a001687552228d32ff7910 Mon Sep 17 00:00:00 2001 From: Ingo Molnar Date: Fri, 30 Jun 2006 02:25:06 -0700 Subject: [PATCH] lock validator: fix ns83820.c irq-flags bug Barry K. Nathan reported the following lockdep warning: [ 197.343948] BUG: warning at kernel/lockdep.c:1856/trace_hardirqs_on() [ 197.345928] [] show_trace_log_lvl+0x5b/0x105 [ 197.346359] [] show_trace+0x1b/0x20 [ 197.346759] [] dump_stack+0x1f/0x24 [ 197.347159] [] trace_hardirqs_on+0xfb/0x185 [ 197.348873] [] _spin_unlock_irq+0x24/0x2d [ 197.350620] [] do_tx_done+0x171/0x179 [ns83820] [ 197.350895] [] ns83820_irq+0x149/0x20b [ns83820] [ 197.351166] [] handle_IRQ_event+0x1d/0x52 [ 197.353216] [] handle_level_irq+0x97/0xe1 [ 197.355157] [] do_IRQ+0x8b/0xac [ 197.355612] [] common_interrupt+0x25/0x2c this is caused because the ns83820 driver re-enables irq flags in hardirq context. While legal in theory, in practice it should only be done if the hardware is really old and has some very high overhead in its ISR. (such as PIO IDE) For modern hardware, running ISRs with irqs enabled is discouraged, because 1) new hardware is fast enough to not cause latency problems 2) allowing the nesting of hardware interrupts only 'spreads out' the handling of the current ISR, causing extra cachemisses that would otherwise not happen. Furthermore, on architectures where ISRs share the kernel stacks, enabling interrupts in ISRs introduces a much higher kernel-stack-nesting and thus kernel-stack-overflow risk. 3) not managing irq-flags via the _irqsave / _irqrestore variants is dangerous: it's easy to forget whether one function nests inside another, and irq flags might be mismanaged. In the few cases where re-enabling interrupts in an ISR is considered useful (and unavoidable), it has to be taught to the lock validator explicitly (because the lock validator needs the "no ISR ever enables hardirqs" artificial simplification to keep the IRQ/softirq locking dependencies manageable). This teaching is done via the explicit use local_irq_enable_in_hardirq(). On a stock kernel this maps to local_irq_enable(). If the lock validator is enabled then this does not enable interrupts. Now, the analysis of drivers/net/ns83820.c's irq flags use: the irq-enabling in irq context seems intentional, but i dont think it's justified. Furthermore, the driver suffers from problem #3 above too, in ns83820_tx_timeout() it disables irqs via local_irq_save(), but then it calls do_tx_done() which does a spin_unlock_irq(), re-enabling for a function that does not expect it! While currently this bug seems harmless (only some debug printout seems to be affected by it), it's nevertheless something to be fixed. So this patch makes the ns83820 ISR irq-flags-safe, and cleans up do_tx_done() use and locking to avoid the ns83820_tx_timeout() bug. From: Arjan van de Ven ns83820_mib_isr takes the misc_lock in IRQ context. All other places that do this in the ISR already use _irqsave versions, make this consistent at least. At some point in the future someone should audit the driver to see if all _irqsave's in the ISR can go away, this is generally an iffy/fragile proposition though; for now get it safe, simple and consistent. From: Arjan van de Ven ok this is a real driver deadlock: The ns83820 driver enabled interrupts (by unlocking the misc_lock with _irq) while still holding the rx_info.lock, which is required to be irq safe since it's used in the ISR like this: writel(1, dev->base + IER); spin_unlock_irq(&dev->misc_lock); kick_rx(ndev); spin_unlock_irq(&dev->rx_info.lock); This is can cause a deadlock if an irq was pending at the first spin_unlock_irq already, or if one would hit during kick_rx(). Simply remove the first _irq solves this Signed-off-by: Ingo Molnar Cc: Benjamin LaHaise Cc: Jeff Garzik Signed-off-by: Arjan van de Ven Signed-off-by: Andrew Morton Signed-off-by: Jeff Garzik --- drivers/net/ns83820.c | 31 +++++++++++++++++-------------- 1 file changed, 17 insertions(+), 14 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/ns83820.c b/drivers/net/ns83820.c index d0ed8646902..0e76859c90a 100644 --- a/drivers/net/ns83820.c +++ b/drivers/net/ns83820.c @@ -803,7 +803,7 @@ static int ns83820_setup_rx(struct net_device *ndev) writel(dev->IMR_cache, dev->base + IMR); writel(1, dev->base + IER); - spin_unlock_irq(&dev->misc_lock); + spin_unlock(&dev->misc_lock); kick_rx(ndev); @@ -1012,8 +1012,6 @@ static void do_tx_done(struct net_device *ndev) struct ns83820 *dev = PRIV(ndev); u32 cmdsts, tx_done_idx, *desc; - spin_lock_irq(&dev->tx_lock); - dprintk("do_tx_done(%p)\n", ndev); tx_done_idx = dev->tx_done_idx; desc = dev->tx_descs + (tx_done_idx * DESC_SIZE); @@ -1069,7 +1067,6 @@ static void do_tx_done(struct net_device *ndev) netif_start_queue(ndev); netif_wake_queue(ndev); } - spin_unlock_irq(&dev->tx_lock); } static void ns83820_cleanup_tx(struct ns83820 *dev) @@ -1281,11 +1278,13 @@ static struct ethtool_ops ops = { .get_link = ns83820_get_link }; +/* this function is called in irq context from the ISR */ static void ns83820_mib_isr(struct ns83820 *dev) { - spin_lock(&dev->misc_lock); + unsigned long flags; + spin_lock_irqsave(&dev->misc_lock, flags); ns83820_update_stats(dev); - spin_unlock(&dev->misc_lock); + spin_unlock_irqrestore(&dev->misc_lock, flags); } static void ns83820_do_isr(struct net_device *ndev, u32 isr); @@ -1307,6 +1306,8 @@ static irqreturn_t ns83820_irq(int foo, void *data, struct pt_regs *regs) static void ns83820_do_isr(struct net_device *ndev, u32 isr) { struct ns83820 *dev = PRIV(ndev); + unsigned long flags; + #ifdef DEBUG if (isr & ~(ISR_PHY | ISR_RXDESC | ISR_RXEARLY | ISR_RXOK | ISR_RXERR | ISR_TXIDLE | ISR_TXOK | ISR_TXDESC)) Dprintk("odd isr? 0x%08x\n", isr); @@ -1321,10 +1322,10 @@ static void ns83820_do_isr(struct net_device *ndev, u32 isr) if ((ISR_RXDESC | ISR_RXOK) & isr) { prefetch(dev->rx_info.next_rx_desc); - spin_lock_irq(&dev->misc_lock); + spin_lock_irqsave(&dev->misc_lock, flags); dev->IMR_cache &= ~(ISR_RXDESC | ISR_RXOK); writel(dev->IMR_cache, dev->base + IMR); - spin_unlock_irq(&dev->misc_lock); + spin_unlock_irqrestore(&dev->misc_lock, flags); tasklet_schedule(&dev->rx_tasklet); //rx_irq(ndev); @@ -1370,16 +1371,18 @@ static void ns83820_do_isr(struct net_device *ndev, u32 isr) * work has accumulated */ if ((ISR_TXDESC | ISR_TXIDLE | ISR_TXOK | ISR_TXERR) & isr) { + spin_lock_irqsave(&dev->tx_lock, flags); do_tx_done(ndev); + spin_unlock_irqrestore(&dev->tx_lock, flags); /* Disable TxOk if there are no outstanding tx packets. */ if ((dev->tx_done_idx == dev->tx_free_idx) && (dev->IMR_cache & ISR_TXOK)) { - spin_lock_irq(&dev->misc_lock); + spin_lock_irqsave(&dev->misc_lock, flags); dev->IMR_cache &= ~ISR_TXOK; writel(dev->IMR_cache, dev->base + IMR); - spin_unlock_irq(&dev->misc_lock); + spin_unlock_irqrestore(&dev->misc_lock, flags); } } @@ -1390,10 +1393,10 @@ static void ns83820_do_isr(struct net_device *ndev, u32 isr) * nature are expected, we must enable TxOk. */ if ((ISR_TXIDLE & isr) && (dev->tx_done_idx != dev->tx_free_idx)) { - spin_lock_irq(&dev->misc_lock); + spin_lock_irqsave(&dev->misc_lock, flags); dev->IMR_cache |= ISR_TXOK; writel(dev->IMR_cache, dev->base + IMR); - spin_unlock_irq(&dev->misc_lock); + spin_unlock_irqrestore(&dev->misc_lock, flags); } /* MIB interrupt: one of the statistics counters is about to overflow */ @@ -1455,7 +1458,7 @@ static void ns83820_tx_timeout(struct net_device *ndev) u32 tx_done_idx, *desc; unsigned long flags; - local_irq_save(flags); + spin_lock_irqsave(&dev->tx_lock, flags); tx_done_idx = dev->tx_done_idx; desc = dev->tx_descs + (tx_done_idx * DESC_SIZE); @@ -1482,7 +1485,7 @@ static void ns83820_tx_timeout(struct net_device *ndev) ndev->name, tx_done_idx, dev->tx_free_idx, le32_to_cpu(desc[DESC_CMDSTS])); - local_irq_restore(flags); + spin_unlock_irqrestore(&dev->tx_lock, flags); } static void ns83820_tx_watch(unsigned long data) -- cgit v1.2.3-70-g09d2 From 5b552b16420d11ec59d301494477713ab5cc1f43 Mon Sep 17 00:00:00 2001 From: Andreas Mohr Date: Fri, 30 Jun 2006 02:25:07 -0700 Subject: [PATCH] NI5010 netcard cleanup - updated MAINTAINERS entry to new format - updated Jan-Pascal's (ACKed) and my email address - driver cleanup/modernization (runtime-, not hardware-tested) [bunk@stusta.de: build fix] Signed-off-by: Andreas Mohr Cc: Jeff Garzik Cc: Jan-Pascal van Best Signed-off-by: Adrian Bunk Signed-off-by: Andrew Morton Signed-off-by: Jeff Garzik --- MAINTAINERS | 7 ++++--- drivers/net/ni5010.c | 52 ++++++++++++++++++++++++---------------------------- 2 files changed, 28 insertions(+), 31 deletions(-) (limited to 'drivers/net') diff --git a/MAINTAINERS b/MAINTAINERS index 5f76a4f5cd4..196a31c9752 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -2039,9 +2039,10 @@ L: linux-kernel@vger.kernel.org S: Maintained NI5010 NETWORK DRIVER -P: Jan-Pascal van Best and Andreas Mohr -M: Jan-Pascal van Best -M: Andreas Mohr <100.30936@germany.net> +P: Jan-Pascal van Best +M: janpascal@vanbest.org +P: Andreas Mohr +M: andi@lisas.de L: netdev@vger.kernel.org S: Maintained diff --git a/drivers/net/ni5010.c b/drivers/net/ni5010.c index a68bf474f6e..d4be207d321 100644 --- a/drivers/net/ni5010.c +++ b/drivers/net/ni5010.c @@ -1,17 +1,12 @@ /* ni5010.c: A network driver for the MiCom-Interlan NI5010 ethercard. * - * Copyright 1996,1997 Jan-Pascal van Best and Andreas Mohr. + * Copyright 1996,1997,2006 Jan-Pascal van Best and Andreas Mohr. * * This software may be used and distributed according to the terms * of the GNU General Public License, incorporated herein by reference. * * The authors may be reached as: - * jvbest@wi.leidenuniv.nl a.mohr@mailto.de - * or by snail mail as - * Jan-Pascal van Best Andreas Mohr - * Klikspaanweg 58-4 Stauferstr. 6 - * 2324 LZ Leiden D-71272 Renningen - * The Netherlands Germany + * janpascal@vanbest.org andi@lisas.de * * Sources: * Donald Becker's "skeleton.c" @@ -27,8 +22,9 @@ * 970503 v0.93: Fixed auto-irq failure on warm reboot (JB) * 970623 v1.00: First kernel version (AM) * 970814 v1.01: Added detection of onboard receive buffer size (AM) + * 060611 v1.02: slight cleanup: email addresses, driver modernization. * Bugs: - * - None known... + * - not SMP-safe (no locking of I/O accesses) * - Note that you have to patch ifconfig for the new /proc/net/dev * format. It gives incorrect stats otherwise. * @@ -39,7 +35,7 @@ * Complete merge with Andreas' driver * Implement ring buffers (Is this useful? You can't squeeze * too many packet in a 2k buffer!) - * Implement DMA (Again, is this useful? Some docs says DMA is + * Implement DMA (Again, is this useful? Some docs say DMA is * slower than programmed I/O) * * Compile with: @@ -47,7 +43,7 @@ * -DMODULE -c ni5010.c * * Insert with e.g.: - * insmod ni5010.o io=0x300 irq=5 + * insmod ni5010.ko io=0x300 irq=5 */ #include @@ -69,15 +65,15 @@ #include "ni5010.h" -static const char *boardname = "NI5010"; -static char *version = - "ni5010.c: v1.00 06/23/97 Jan-Pascal van Best and Andreas Mohr\n"; +static const char boardname[] = "NI5010"; +static char version[] __initdata = + "ni5010.c: v1.02 20060611 Jan-Pascal van Best and Andreas Mohr\n"; /* bufsize_rcv == 0 means autoprobing */ static unsigned int bufsize_rcv; -#define jumpered_interrupts /* IRQ line jumpered on board */ -#undef jumpered_dma /* No DMA used */ +#define JUMPERED_INTERRUPTS /* IRQ line jumpered on board */ +#undef JUMPERED_DMA /* No DMA used */ #undef FULL_IODETECT /* Only detect in portlist */ #ifndef FULL_IODETECT @@ -281,7 +277,7 @@ static int __init ni5010_probe1(struct net_device *dev, int ioaddr) PRINTK2((KERN_DEBUG "%s: I/O #4 passed!\n", dev->name)); -#ifdef jumpered_interrupts +#ifdef JUMPERED_INTERRUPTS if (dev->irq == 0xff) ; else if (dev->irq < 2) { @@ -305,7 +301,7 @@ static int __init ni5010_probe1(struct net_device *dev, int ioaddr) } else if (dev->irq == 2) { dev->irq = 9; } -#endif /* jumpered_irq */ +#endif /* JUMPERED_INTERRUPTS */ PRINTK2((KERN_DEBUG "%s: I/O #9 passed!\n", dev->name)); /* DMA is not supported (yet?), so no use detecting it */ @@ -334,7 +330,7 @@ static int __init ni5010_probe1(struct net_device *dev, int ioaddr) outw(0, IE_GP); /* Point GP at start of packet */ outb(0, IE_RBUF); /* set buffer byte 0 to 0 again */ } - printk("// bufsize rcv/xmt=%d/%d\n", bufsize_rcv, NI5010_BUFSIZE); + printk("-> bufsize rcv/xmt=%d/%d\n", bufsize_rcv, NI5010_BUFSIZE); memset(dev->priv, 0, sizeof(struct ni5010_local)); dev->open = ni5010_open; @@ -354,11 +350,9 @@ static int __init ni5010_probe1(struct net_device *dev, int ioaddr) outb(0xff, EDLC_XCLR); /* Kill all pending xmt interrupts */ printk(KERN_INFO "%s: NI5010 found at 0x%x, using IRQ %d", dev->name, ioaddr, dev->irq); - if (dev->dma) printk(" & DMA %d", dev->dma); + if (dev->dma) + printk(" & DMA %d", dev->dma); printk(".\n"); - - printk(KERN_INFO "Join the NI5010 driver development team!\n"); - printk(KERN_INFO "Mail to a.mohr@mailto.de or jvbest@wi.leidenuniv.nl\n"); return 0; out: release_region(dev->base_addr, NI5010_IO_EXTENT); @@ -371,7 +365,7 @@ out: * * This routine should set everything up anew at each open, even * registers that "should" only need to be set once at boot, so that - * there is non-reboot way to recover if something goes wrong. + * there is a non-reboot way to recover if something goes wrong. */ static int ni5010_open(struct net_device *dev) @@ -390,13 +384,13 @@ static int ni5010_open(struct net_device *dev) * Always allocate the DMA channel after the IRQ, * and clean up on failure. */ -#ifdef jumpered_dma +#ifdef JUMPERED_DMA if (request_dma(dev->dma, cardname)) { printk(KERN_WARNING "%s: Cannot get dma %#2x\n", dev->name, dev->dma); free_irq(dev->irq, NULL); return -EAGAIN; } -#endif /* jumpered_dma */ +#endif /* JUMPERED_DMA */ PRINTK3((KERN_DEBUG "%s: passed open() #2\n", dev->name)); /* Reset the hardware here. Don't forget to set the station address. */ @@ -633,7 +627,7 @@ static int ni5010_close(struct net_device *dev) int ioaddr = dev->base_addr; PRINTK2((KERN_DEBUG "%s: entering ni5010_close\n", dev->name)); -#ifdef jumpered_interrupts +#ifdef JUMPERED_INTERRUPTS free_irq(dev->irq, NULL); #endif /* Put card in held-RESET state */ @@ -771,7 +765,7 @@ module_param(irq, int, 0); MODULE_PARM_DESC(io, "ni5010 I/O base address"); MODULE_PARM_DESC(irq, "ni5010 IRQ number"); -int init_module(void) +static int __init ni5010_init_module(void) { PRINTK2((KERN_DEBUG "%s: entering init_module\n", boardname)); /* @@ -792,13 +786,15 @@ int init_module(void) return 0; } -void cleanup_module(void) +static void __exit ni5010_cleanup_module(void) { PRINTK2((KERN_DEBUG "%s: entering cleanup_module\n", boardname)); unregister_netdev(dev_ni5010); release_region(dev_ni5010->base_addr, NI5010_IO_EXTENT); free_netdev(dev_ni5010); } +module_init(ni5010_init_module); +module_exit(ni5010_cleanup_module); #endif /* MODULE */ MODULE_LICENSE("GPL"); -- cgit v1.2.3-70-g09d2 From 22db99bd32646aa33051e23420ff3517cc70cad5 Mon Sep 17 00:00:00 2001 From: Paul Fulghum Date: Fri, 30 Jun 2006 02:27:19 -0700 Subject: [PATCH] remove dead entry in net wan Kconfig Remove dead entry from net wan Kconfig and net wan Makefile.. This entry is left over from 2.4 where synclink used syncppp driver directly. synclink drivers now use generic HDLC Signed-off-by: Paul Fulghum Signed-off-by: Andrew Morton Signed-off-by: Jeff Garzik --- drivers/net/wan/Kconfig | 12 ------------ drivers/net/wan/Makefile | 1 - 2 files changed, 13 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/wan/Kconfig b/drivers/net/wan/Kconfig index b5328b0ff92..54b8e492ef9 100644 --- a/drivers/net/wan/Kconfig +++ b/drivers/net/wan/Kconfig @@ -134,18 +134,6 @@ config SEALEVEL_4021 The driver will be compiled as a module: the module will be called sealevel. -config SYNCLINK_SYNCPPP - tristate "SyncLink HDLC/SYNCPPP support" - depends on WAN - help - Enables HDLC/SYNCPPP support for the SyncLink WAN driver. - - Normally the SyncLink WAN driver works with the main PPP driver - and pppd program. - HDLC/SYNCPPP support allows use of the Cisco HDLC/PPP driver - . The SyncLink WAN driver (in - character devices) must also be enabled. - # Generic HDLC config HDLC tristate "Generic HDLC layer" diff --git a/drivers/net/wan/Makefile b/drivers/net/wan/Makefile index 823c6d5ab90..316ca6869d5 100644 --- a/drivers/net/wan/Makefile +++ b/drivers/net/wan/Makefile @@ -28,7 +28,6 @@ obj-$(CONFIG_COSA) += syncppp.o cosa.o obj-$(CONFIG_FARSYNC) += syncppp.o farsync.o obj-$(CONFIG_DSCC4) += dscc4.o obj-$(CONFIG_LANMEDIA) += syncppp.o -obj-$(CONFIG_SYNCLINK_SYNCPPP) += syncppp.o obj-$(CONFIG_X25_ASY) += x25_asy.o obj-$(CONFIG_LANMEDIA) += lmc/ -- cgit v1.2.3-70-g09d2 From b07db75a9f542c1a1745fcb047fd743843db8daa Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Fri, 30 Jun 2006 13:56:13 +0100 Subject: [PATCH] Fix freeing of net device Plus optical sugar. Signed-off-by: Ralf Baechle Signed-off-by: Jeff Garzik --- drivers/net/declance.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/declance.c b/drivers/net/declance.c index 2038ca7e49c..6ad5796121c 100644 --- a/drivers/net/declance.c +++ b/drivers/net/declance.c @@ -703,8 +703,8 @@ static irqreturn_t lance_dma_merr_int(const int irq, void *dev_id, return IRQ_HANDLED; } -static irqreturn_t -lance_interrupt(const int irq, void *dev_id, struct pt_regs *regs) +static irqreturn_t lance_interrupt(const int irq, void *dev_id, + struct pt_regs *regs) { struct net_device *dev = (struct net_device *) dev_id; struct lance_private *lp = netdev_priv(dev); @@ -1253,7 +1253,7 @@ static int __init dec_lance_init(const int type, const int slot) return 0; err_out_free_dev: - kfree(dev); + free_netdev(dev); err_out: return ret; @@ -1299,6 +1299,7 @@ static void __exit dec_lance_cleanup(void) while (root_lance_dev) { struct net_device *dev = root_lance_dev; struct lance_private *lp = netdev_priv(dev); + unregister_netdev(dev); #ifdef CONFIG_TC if (lp->slot >= 0) -- cgit v1.2.3-70-g09d2 From ec590970f0f45a11c06b9525cd718dbdde22b4a3 Mon Sep 17 00:00:00 2001 From: "brice@myri.com" Date: Mon, 3 Jul 2006 18:02:31 -0400 Subject: [PATCH] myri10ge - Drop unused pm_state The pm_state field in the myri10ge_priv structure is unused. Drop it. Signed-off-by: Brice Goglin Signed-off-by: Jeff Garzik --- drivers/net/myri10ge/myri10ge.c | 1 - 1 file changed, 1 deletion(-) (limited to 'drivers/net') diff --git a/drivers/net/myri10ge/myri10ge.c b/drivers/net/myri10ge/myri10ge.c index 72aad42db7b..82ee0ed62cd 100644 --- a/drivers/net/myri10ge/myri10ge.c +++ b/drivers/net/myri10ge/myri10ge.c @@ -188,7 +188,6 @@ struct myri10ge_priv { int vendor_specific_offset; u32 devctl; u16 msi_flags; - u32 pm_state[16]; u32 read_dma; u32 write_dma; u32 read_write_dma; -- cgit v1.2.3-70-g09d2 From 18ac544306855aa366d34d29755f4596acd7a58d Mon Sep 17 00:00:00 2001 From: "brice@myri.com" Date: Mon, 3 Jul 2006 18:02:32 -0400 Subject: [PATCH] myri10ge - Drop ununsed nvidia chipset id The workaround for the AER capability of the nVidia chipset has been removed, we don't need this PCI id anymore. Drop it. Signed-off-by: Brice Goglin Signed-off-by: Jeff Garzik --- drivers/net/myri10ge/myri10ge.c | 2 -- 1 file changed, 2 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/myri10ge/myri10ge.c b/drivers/net/myri10ge/myri10ge.c index 82ee0ed62cd..8345e4f2579 100644 --- a/drivers/net/myri10ge/myri10ge.c +++ b/drivers/net/myri10ge/myri10ge.c @@ -2196,8 +2196,6 @@ static int myri10ge_change_mtu(struct net_device *dev, int new_mtu) * any other device, except if forced with myri10ge_ecrc_enable > 1. */ -#define PCI_DEVICE_ID_NVIDIA_NFORCE_CK804_PCIE 0x005d - static void myri10ge_enable_ecrc(struct myri10ge_priv *mgp) { struct pci_dev *bridge = mgp->pdev->bus->self; -- cgit v1.2.3-70-g09d2 From d6020787488e837d3c2b24eb1b8cf9849058d340 Mon Sep 17 00:00:00 2001 From: Brice Goglin Date: Mon, 3 Jul 2006 18:41:30 -0400 Subject: [PATCH] myri10ge - Use dev_info() when printing parameters after probe Displaying the interface name when listing the device parameters at the end of myri10ge_probe is not a good idea since udev might rename the interface soon afterwards. Print the bus id instead, using dev_info(). Signed-off-by: Brice Goglin Signed-off-by: Jeff Garzik --- drivers/net/myri10ge/myri10ge.c | 9 ++++----- 1 file changed, 4 insertions(+), 5 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/myri10ge/myri10ge.c b/drivers/net/myri10ge/myri10ge.c index 8345e4f2579..abb5dd57c73 100644 --- a/drivers/net/myri10ge/myri10ge.c +++ b/drivers/net/myri10ge/myri10ge.c @@ -2734,11 +2734,10 @@ static int myri10ge_probe(struct pci_dev *pdev, const struct pci_device_id *ent) dev_err(&pdev->dev, "register_netdev failed: %d\n", status); goto abort_with_irq; } - - printk(KERN_INFO "myri10ge: %s: %s IRQ %d, tx bndry %d, fw %s, WC %s\n", - netdev->name, (mgp->msi_enabled ? "MSI" : "xPIC"), - pdev->irq, mgp->tx.boundary, mgp->fw_name, - (mgp->mtrr >= 0 ? "Enabled" : "Disabled")); + dev_info(dev, "%s IRQ %d, tx bndry %d, fw %s, WC %s\n", + (mgp->msi_enabled ? "MSI" : "xPIC"), + pdev->irq, mgp->tx.boundary, mgp->fw_name, + (mgp->mtrr >= 0 ? "Enabled" : "Disabled")); return 0; -- cgit v1.2.3-70-g09d2 From 2c1a108890c5b57cf3f7d7909f55c4fae0f52f19 Mon Sep 17 00:00:00 2001 From: Brice Goglin Date: Mon, 3 Jul 2006 18:16:46 -0400 Subject: [PATCH] myri10ge - Export more parameters to ethtool Add the IRQ line, the tx_boundary, and whether Write-combining and MSI are enabled to the list of parameters that are exported to ethtool. Signed-off-by: Brice Goglin Signed-off-by: Jeff Garzik --- drivers/net/myri10ge/myri10ge.c | 5 +++++ 1 file changed, 5 insertions(+) (limited to 'drivers/net') diff --git a/drivers/net/myri10ge/myri10ge.c b/drivers/net/myri10ge/myri10ge.c index abb5dd57c73..f4c8fd373b9 100644 --- a/drivers/net/myri10ge/myri10ge.c +++ b/drivers/net/myri10ge/myri10ge.c @@ -1288,6 +1288,7 @@ static const char myri10ge_gstrings_stats[][ETH_GSTRING_LEN] = { "tx_aborted_errors", "tx_carrier_errors", "tx_fifo_errors", "tx_heartbeat_errors", "tx_window_errors", /* device-specific stats */ + "tx_boundary", "WC", "irq", "MSI", "read_dma_bw_MBs", "write_dma_bw_MBs", "read_write_dma_bw_MBs", "serial_number", "tx_pkt_start", "tx_pkt_done", "tx_req", "tx_done", "rx_small_cnt", "rx_big_cnt", @@ -1326,6 +1327,10 @@ myri10ge_get_ethtool_stats(struct net_device *netdev, for (i = 0; i < MYRI10GE_NET_STATS_LEN; i++) data[i] = ((unsigned long *)&mgp->stats)[i]; + data[i++] = (unsigned int)mgp->tx.boundary; + data[i++] = (unsigned int)(mgp->mtrr >= 0); + data[i++] = (unsigned int)mgp->pdev->irq; + data[i++] = (unsigned int)mgp->msi_enabled; data[i++] = (unsigned int)mgp->read_dma; data[i++] = (unsigned int)mgp->write_dma; data[i++] = (unsigned int)mgp->read_write_dma; -- cgit v1.2.3-70-g09d2 From 20ed7c094dfe33b0e15e8c60f60012b9278631d3 Mon Sep 17 00:00:00 2001 From: Jeff Garzik Date: Wed, 5 Jul 2006 14:28:34 -0400 Subject: [netdrvr] 3c59x: snip changelog from source code Driver source code is not the preferred place to store change history. Acked-by: Andrew Morton Signed-off-by: Jeff Garzik --- drivers/net/3c59x.c | 166 ---------------------------------------------------- 1 file changed, 166 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/3c59x.c b/drivers/net/3c59x.c index 2819de79442..80e8ca013e4 100644 --- a/drivers/net/3c59x.c +++ b/drivers/net/3c59x.c @@ -17,172 +17,6 @@ 410 Severn Ave., Suite 210 Annapolis MD 21403 - Linux Kernel Additions: - - 0.99H+lk0.9 - David S. Miller - softnet, PCI DMA updates - 0.99H+lk1.0 - Jeff Garzik - Remove compatibility defines for kernel versions < 2.2.x. - Update for new 2.3.x module interface - LK1.1.2 (March 19, 2000) - * New PCI interface (jgarzik) - - LK1.1.3 25 April 2000, Andrew Morton - - Merged with 3c575_cb.c - - Don't set RxComplete in boomerang interrupt enable reg - - spinlock in vortex_timer to protect mdio functions - - disable local interrupts around call to vortex_interrupt in - vortex_tx_timeout() (So vortex_interrupt can use spin_lock()) - - Select window 3 in vortex_timer()'s write to Wn3_MAC_Ctrl - - In vortex_start_xmit(), move the lock to _after_ we've altered - vp->cur_tx and vp->tx_full. This defeats the race between - vortex_start_xmit() and vortex_interrupt which was identified - by Bogdan Costescu. - - Merged back support for six new cards from various sources - - Set vortex_have_pci if pci_module_init returns zero (fixes cardbus - insertion oops) - - Tell it that 3c905C has NWAY for 100bT autoneg - - Fix handling of SetStatusEnd in 'Too much work..' code, as - per 2.3.99's 3c575_cb (Dave Hinds). - - Split ISR into two for vortex & boomerang - - Fix MOD_INC/DEC races - - Handle resource allocation failures. - - Fix 3CCFE575CT LED polarity - - Make tx_interrupt_mitigation the default - - LK1.1.4 25 April 2000, Andrew Morton - - Add extra TxReset to vortex_up() to fix 575_cb hotplug initialisation probs. - - Put vortex_info_tbl into __devinitdata - - In the vortex_error StatsFull HACK, disable stats in vp->intr_enable as well - as in the hardware. - - Increased the loop counter in issue_and_wait from 2,000 to 4,000. - - LK1.1.5 28 April 2000, andrewm - - Added powerpc defines (John Daniel said these work...) - - Some extra diagnostics - - In vortex_error(), reset the Tx on maxCollisions. Otherwise most - chips usually get a Tx timeout. - - Added extra_reset module parm - - Replaced some inline timer manip with mod_timer - (Franois romieu ) - - In vortex_up(), don't make Wn3_config initialisation dependent upon has_nway - (this came across from 3c575_cb). - - LK1.1.6 06 Jun 2000, andrewm - - Backed out the PPC defines. - - Use del_timer_sync(), mod_timer(). - - Fix wrapped ulong comparison in boomerang_rx() - - Add IS_TORNADO, use it to suppress 3c905C checksum error msg - (Donald Becker, I Lee Hetherington ) - - Replace union wn3_config with BFINS/BFEXT manipulation for - sparc64 (Pete Zaitcev, Peter Jones) - - In vortex_error, do_tx_reset and vortex_tx_timeout(Vortex): - do a netif_wake_queue() to better recover from errors. (Anders Pedersen, - Donald Becker) - - Print a warning on out-of-memory (rate limited to 1 per 10 secs) - - Added two more Cardbus 575 NICs: 5b57 and 6564 (Paul Wagland) - - LK1.1.7 2 Jul 2000 andrewm - - Better handling of shared IRQs - - Reset the transmitter on a Tx reclaim error - - Fixed crash under OOM during vortex_open() (Mark Hemment) - - Fix Rx cessation problem during OOM (help from Mark Hemment) - - The spinlocks around the mdio access were blocking interrupts for 300uS. - Fix all this to use spin_lock_bh() within mdio_read/write - - Only write to TxFreeThreshold if it's a boomerang - other NICs don't - have one. - - Added 802.3x MAC-layer flow control support - - LK1.1.8 13 Aug 2000 andrewm - - Ignore request_region() return value - already reserved if Cardbus. - - Merged some additional Cardbus flags from Don's 0.99Qk - - Some fixes for 3c556 (Fred Maciel) - - Fix for EISA initialisation (Jan Rekorajski) - - Renamed MII_XCVR_PWR and EEPROM_230 to align with 3c575_cb and D. Becker's drivers - - Fixed MII_XCVR_PWR for 3CCFE575CT - - Added INVERT_LED_PWR, used it. - - Backed out the extra_reset stuff - - LK1.1.9 12 Sep 2000 andrewm - - Backed out the tx_reset_resume flags. It was a no-op. - - In vortex_error, don't reset the Tx on txReclaim errors - - In vortex_error, don't reset the Tx on maxCollisions errors. - Hence backed out all the DownListPtr logic here. - - In vortex_error, give Tornado cards a partial TxReset on - maxCollisions (David Hinds). Defined MAX_COLLISION_RESET for this. - - Redid some driver flags and device names based on pcmcia_cs-3.1.20. - - Fixed a bug where, if vp->tx_full is set when the interface - is downed, it remains set when the interface is upped. Bad - things happen. - - LK1.1.10 17 Sep 2000 andrewm - - Added EEPROM_8BIT for 3c555 (Fred Maciel) - - Added experimental support for the 3c556B Laptop Hurricane (Louis Gerbarg) - - Add HAS_NWAY to "3c900 Cyclone 10Mbps TPO" - - LK1.1.11 13 Nov 2000 andrewm - - Dump MOD_INC/DEC_USE_COUNT, use SET_MODULE_OWNER - - LK1.1.12 1 Jan 2001 andrewm (2.4.0-pre1) - - Call pci_enable_device before we request our IRQ (Tobias Ringstrom) - - Add 3c590 PCI latency timer hack to vortex_probe1 (from 0.99Ra) - - Added extended issue_and_wait for the 3c905CX. - - Look for an MII on PHY index 24 first (3c905CX oddity). - - Add HAS_NWAY to 3cSOHO100-TX (Brett Frankenberger) - - Don't free skbs we don't own on oom path in vortex_open(). - - LK1.1.13 27 Jan 2001 - - Added explicit `medialock' flag so we can truly - lock the media type down with `options'. - - "check ioremap return and some tidbits" (Arnaldo Carvalho de Melo ) - - Added and used EEPROM_NORESET for 3c556B PM resumes. - - Fixed leakage of vp->rx_ring. - - Break out separate HAS_HWCKSM device capability flag. - - Kill vp->tx_full (ANK) - - Merge zerocopy fragment handling (ANK?) - - LK1.1.14 15 Feb 2001 - - Enable WOL. Can be turned on with `enable_wol' module option. - - EISA and PCI initialisation fixes (jgarzik, Manfred Spraul) - - If a device's internalconfig register reports it has NWAY, - use it, even if autoselect is enabled. - - LK1.1.15 6 June 2001 akpm - - Prevent double counting of received bytes (Lars Christensen) - - Add ethtool support (jgarzik) - - Add module parm descriptions (Andrzej M. Krzysztofowicz) - - Implemented alloc_etherdev() API - - Special-case the 'Tx error 82' message. - - LK1.1.16 18 July 2001 akpm - - Make NETIF_F_SG dependent upon nr_free_highpages(), not on CONFIG_HIGHMEM - - Lessen verbosity of bootup messages - - Fix WOL - use new PM API functions. - - Use netif_running() instead of vp->open in suspend/resume. - - Don't reset the interface logic on open/close/rmmod. It upsets - autonegotiation, and hence DHCP (from 0.99T). - - Back out EEPROM_NORESET flag because of the above (we do it for all - NICs). - - Correct 3c982 identification string - - Rename wait_for_completion() to issue_and_wait() to avoid completion.h - clash. - - LK1.1.17 18Dec01 akpm - - PCI ID 9805 is a Python-T, not a dual-port Cyclone. Apparently. - And it has NWAY. - - Mask our advertised modes (vp->advertising) with our capabilities - (MII reg5) when deciding which duplex mode to use. - - Add `global_options' as default for options[]. Ditto global_enable_wol, - global_full_duplex. - - LK1.1.18 01Jul02 akpm - - Fix for undocumented transceiver power-up bit on some 3c566B's - (Donald Becker, Rahul Karnik) - - - See http://www.zip.com.au/~akpm/linux/#3c59x-2.3 for more details. - - Also see Documentation/networking/vortex.txt - - LK1.1.19 10Nov02 Marc Zyngier - - EISA sysfs integration. */ /* -- cgit v1.2.3-70-g09d2 From bce305f4fe779f29d99d414685243f5da0803254 Mon Sep 17 00:00:00 2001 From: Arjan van de Ven Date: Wed, 5 Jul 2006 15:00:40 +0200 Subject: [PATCH] 8139too deadlock fix > stack backtrace: > [] rtl8139_start_xmit+0xd9/0xff [8139too] > [] netpoll_send_skb+0x98/0xea This seems to be a real deadlock... So netpoll_send_skb takes the _xmit_lock, which is all nitty gritty but then rtl8139_start_xmit comes around while that lock is taken, and does spin_unlock_irq(&tp->lock); which.. enables interrupts and softirqs; this is quite bad because the xmit lock is taken in softirq context for the watchdog like this: [] _spin_lock+0x23/0x32 [] dev_watchdog+0x14/0xb1 [] run_timer_softirq+0xf2/0x14a [] __do_softirq+0x55/0xb0 [] do_softirq+0x58/0xbd Which would deadlock now that the spin_unlock_irq() has enabled irqs/softirqs while the _xmit_lock is still held. The patch below turns this into a irqsave/irqrestore pair so that interrupts don't get enabled unconditionally. Signed-off-by: Arjan van de Ven Signed-off-by: Ingo Molnar Signed-off-by: Jeff Garzik --- drivers/net/8139too.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/8139too.c b/drivers/net/8139too.c index cd9718512d1..e4f4eaff767 100644 --- a/drivers/net/8139too.c +++ b/drivers/net/8139too.c @@ -1709,6 +1709,7 @@ static int rtl8139_start_xmit (struct sk_buff *skb, struct net_device *dev) void __iomem *ioaddr = tp->mmio_addr; unsigned int entry; unsigned int len = skb->len; + unsigned long flags; /* Calculate the next Tx descriptor entry. */ entry = tp->cur_tx % NUM_TX_DESC; @@ -1725,7 +1726,7 @@ static int rtl8139_start_xmit (struct sk_buff *skb, struct net_device *dev) return 0; } - spin_lock_irq(&tp->lock); + spin_lock_irqsave(&tp->lock, flags); RTL_W32_F (TxStatus0 + (entry * sizeof (u32)), tp->tx_flag | max(len, (unsigned int)ETH_ZLEN)); @@ -1736,7 +1737,7 @@ static int rtl8139_start_xmit (struct sk_buff *skb, struct net_device *dev) if ((tp->cur_tx - NUM_TX_DESC) == tp->dirty_tx) netif_stop_queue (dev); - spin_unlock_irq(&tp->lock); + spin_unlock_irqrestore(&tp->lock, flags); if (netif_msg_tx_queued(tp)) printk (KERN_DEBUG "%s: Queued Tx packet size %u to slot %d.\n", -- cgit v1.2.3-70-g09d2 From c165b0040502ef0d2b5751eef3cd96ea8210ae4c Mon Sep 17 00:00:00 2001 From: "John W. Linville" Date: Sat, 8 Jul 2006 13:28:53 -0700 Subject: [TG3]: add amd8131 to "write reorder" chipsets Add the AMD 8131 bridge to the list of chipsets that reorder writes. Signed-off-by: John W. Linville Acked-by: Michael Chan Signed-off-by: David S. Miller --- drivers/net/tg3.c | 2 ++ 1 file changed, 2 insertions(+) (limited to 'drivers/net') diff --git a/drivers/net/tg3.c b/drivers/net/tg3.c index f645921aff8..ce6f3be86da 100644 --- a/drivers/net/tg3.c +++ b/drivers/net/tg3.c @@ -10078,6 +10078,8 @@ static int __devinit tg3_get_invariants(struct tg3 *tp) static struct pci_device_id write_reorder_chipsets[] = { { PCI_DEVICE(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_FE_GATE_700C) }, + { PCI_DEVICE(PCI_VENDOR_ID_AMD, + PCI_DEVICE_ID_AMD_8131_BRIDGE) }, { PCI_DEVICE(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8385_0) }, { }, -- cgit v1.2.3-70-g09d2 From 9c6c6795eda34e4dc38ecac912a16b6314082beb Mon Sep 17 00:00:00 2001 From: Adrian Bunk Date: Sat, 8 Jul 2006 13:33:28 -0700 Subject: [IRDA]: fix drivers/net/irda/ali-ircc.c:ali_ircc_init() The Coverity checker spotted, that from the changes from commit 898b1d16f8230fb912a0c2248df685735c6ceda3 the if (ret) platform_driver_unregister(&ali_ircc_driver); was dead code. This patch changes this function to what seems to have been the intention. Signed-off-by: Adrian Bunk Signed-off-by: David S. Miller --- drivers/net/irda/ali-ircc.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'drivers/net') diff --git a/drivers/net/irda/ali-ircc.c b/drivers/net/irda/ali-ircc.c index bf1fca5a3fa..e3c8cd5eca6 100644 --- a/drivers/net/irda/ali-ircc.c +++ b/drivers/net/irda/ali-ircc.c @@ -146,7 +146,7 @@ static int __init ali_ircc_init(void) { ali_chip_t *chip; chipio_t info; - int ret = -ENODEV; + int ret; int cfg, cfg_base; int reg, revision; int i = 0; @@ -160,6 +160,7 @@ static int __init ali_ircc_init(void) return ret; } + ret = -ENODEV; /* Probe for all the ALi chipsets we know about */ for (chip= chips; chip->name; chip++, i++) -- cgit v1.2.3-70-g09d2 From 89114afd435a486deb8583e89f490fc274444d18 Mon Sep 17 00:00:00 2001 From: Herbert Xu Date: Sat, 8 Jul 2006 13:34:32 -0700 Subject: [NET] gso: Add skb_is_gso This patch adds the wrapper function skb_is_gso which can be used instead of directly testing skb_shinfo(skb)->gso_size. This makes things a little nicer and allows us to change the primary key for indicating whether an skb is GSO (if we ever want to do that). Signed-off-by: Herbert Xu Signed-off-by: David S. Miller --- drivers/net/bnx2.c | 2 +- drivers/net/chelsio/sge.c | 2 +- drivers/net/e1000/e1000_main.c | 7 +++---- drivers/net/forcedeth.c | 2 +- drivers/net/ixgb/ixgb_main.c | 2 +- drivers/net/loopback.c | 2 +- drivers/net/myri10ge/myri10ge.c | 2 +- drivers/net/sky2.c | 2 +- drivers/net/typhoon.c | 4 ++-- drivers/s390/net/qeth_main.c | 2 +- include/linux/netdevice.h | 2 +- include/linux/skbuff.h | 5 +++++ net/bridge/br_forward.c | 2 +- net/bridge/br_netfilter.c | 2 +- net/ipv4/ip_output.c | 4 ++-- net/ipv4/xfrm4_output.c | 2 +- net/ipv6/ip6_output.c | 4 ++-- net/ipv6/xfrm6_output.c | 2 +- 18 files changed, 27 insertions(+), 23 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/bnx2.c b/drivers/net/bnx2.c index 64b6a72b4f6..db73de0d251 100644 --- a/drivers/net/bnx2.c +++ b/drivers/net/bnx2.c @@ -1639,7 +1639,7 @@ bnx2_tx_int(struct bnx2 *bp) skb = tx_buf->skb; #ifdef BCM_TSO /* partial BD completions possible with TSO packets */ - if (skb_shinfo(skb)->gso_size) { + if (skb_is_gso(skb)) { u16 last_idx, last_ring_idx; last_idx = sw_cons + diff --git a/drivers/net/chelsio/sge.c b/drivers/net/chelsio/sge.c index 87f94d939ff..61b3754f50f 100644 --- a/drivers/net/chelsio/sge.c +++ b/drivers/net/chelsio/sge.c @@ -1417,7 +1417,7 @@ int t1_start_xmit(struct sk_buff *skb, struct net_device *dev) struct cpl_tx_pkt *cpl; #ifdef NETIF_F_TSO - if (skb_shinfo(skb)->gso_size) { + if (skb_is_gso(skb)) { int eth_type; struct cpl_tx_pkt_lso *hdr; diff --git a/drivers/net/e1000/e1000_main.c b/drivers/net/e1000/e1000_main.c index f77624f5f17..1f34d06d01b 100644 --- a/drivers/net/e1000/e1000_main.c +++ b/drivers/net/e1000/e1000_main.c @@ -2394,7 +2394,7 @@ e1000_tso(struct e1000_adapter *adapter, struct e1000_tx_ring *tx_ring, uint8_t ipcss, ipcso, tucss, tucso, hdr_len; int err; - if (skb_shinfo(skb)->gso_size) { + if (skb_is_gso(skb)) { if (skb_header_cloned(skb)) { err = pskb_expand_head(skb, 0, 0, GFP_ATOMIC); if (err) @@ -2519,7 +2519,7 @@ e1000_tx_map(struct e1000_adapter *adapter, struct e1000_tx_ring *tx_ring, * tso gets written back prematurely before the data is fully * DMA'd to the controller */ if (!skb->data_len && tx_ring->last_tx_tso && - !skb_shinfo(skb)->gso_size) { + !skb_is_gso(skb)) { tx_ring->last_tx_tso = 0; size -= 4; } @@ -2806,8 +2806,7 @@ e1000_xmit_frame(struct sk_buff *skb, struct net_device *netdev) #ifdef NETIF_F_TSO /* Controller Erratum workaround */ - if (!skb->data_len && tx_ring->last_tx_tso && - !skb_shinfo(skb)->gso_size) + if (!skb->data_len && tx_ring->last_tx_tso && !skb_is_gso(skb)) count++; #endif diff --git a/drivers/net/forcedeth.c b/drivers/net/forcedeth.c index 037d870712f..ad81ec68f88 100644 --- a/drivers/net/forcedeth.c +++ b/drivers/net/forcedeth.c @@ -1495,7 +1495,7 @@ static int nv_start_xmit(struct sk_buff *skb, struct net_device *dev) np->tx_skbuff[nr] = skb; #ifdef NETIF_F_TSO - if (skb_shinfo(skb)->gso_size) + if (skb_is_gso(skb)) tx_flags_extra = NV_TX2_TSO | (skb_shinfo(skb)->gso_size << NV_TX2_TSO_SHIFT); else #endif diff --git a/drivers/net/ixgb/ixgb_main.c b/drivers/net/ixgb/ixgb_main.c index b91e082483f..7eb08d92913 100644 --- a/drivers/net/ixgb/ixgb_main.c +++ b/drivers/net/ixgb/ixgb_main.c @@ -1173,7 +1173,7 @@ ixgb_tso(struct ixgb_adapter *adapter, struct sk_buff *skb) uint16_t ipcse, tucse, mss; int err; - if(likely(skb_shinfo(skb)->gso_size)) { + if (likely(skb_is_gso(skb))) { if (skb_header_cloned(skb)) { err = pskb_expand_head(skb, 0, 0, GFP_ATOMIC); if (err) diff --git a/drivers/net/loopback.c b/drivers/net/loopback.c index 43fef7de8cb..997cbce9af6 100644 --- a/drivers/net/loopback.c +++ b/drivers/net/loopback.c @@ -139,7 +139,7 @@ static int loopback_xmit(struct sk_buff *skb, struct net_device *dev) #endif #ifdef LOOPBACK_TSO - if (skb_shinfo(skb)->gso_size) { + if (skb_is_gso(skb)) { BUG_ON(skb->protocol != htons(ETH_P_IP)); BUG_ON(skb->nh.iph->protocol != IPPROTO_TCP); diff --git a/drivers/net/myri10ge/myri10ge.c b/drivers/net/myri10ge/myri10ge.c index f4c8fd373b9..ee1de971a71 100644 --- a/drivers/net/myri10ge/myri10ge.c +++ b/drivers/net/myri10ge/myri10ge.c @@ -2116,7 +2116,7 @@ abort_linearize: } idx = (idx + 1) & tx->mask; } while (idx != last_idx); - if (skb_shinfo(skb)->gso_size) { + if (skb_is_gso(skb)) { printk(KERN_ERR "myri10ge: %s: TSO but wanted to linearize?!?!?\n", mgp->dev->name); diff --git a/drivers/net/sky2.c b/drivers/net/sky2.c index 418f169a6a3..31093760aa1 100644 --- a/drivers/net/sky2.c +++ b/drivers/net/sky2.c @@ -1159,7 +1159,7 @@ static unsigned tx_le_req(const struct sk_buff *skb) count = sizeof(dma_addr_t) / sizeof(u32); count += skb_shinfo(skb)->nr_frags * count; - if (skb_shinfo(skb)->gso_size) + if (skb_is_gso(skb)) ++count; if (skb->ip_summed == CHECKSUM_HW) diff --git a/drivers/net/typhoon.c b/drivers/net/typhoon.c index 063816f2b11..4103c37172f 100644 --- a/drivers/net/typhoon.c +++ b/drivers/net/typhoon.c @@ -805,7 +805,7 @@ typhoon_start_tx(struct sk_buff *skb, struct net_device *dev) * If problems develop with TSO, check this first. */ numDesc = skb_shinfo(skb)->nr_frags + 1; - if(skb_tso_size(skb)) + if (skb_is_gso(skb)) numDesc++; /* When checking for free space in the ring, we need to also @@ -845,7 +845,7 @@ typhoon_start_tx(struct sk_buff *skb, struct net_device *dev) TYPHOON_TX_PF_VLAN_TAG_SHIFT); } - if(skb_tso_size(skb)) { + if (skb_is_gso(skb)) { first_txd->processFlags |= TYPHOON_TX_PF_TCP_SEGMENT; first_txd->numDesc++; diff --git a/drivers/s390/net/qeth_main.c b/drivers/s390/net/qeth_main.c index 8e8963f1573..329e12c1fae 100644 --- a/drivers/s390/net/qeth_main.c +++ b/drivers/s390/net/qeth_main.c @@ -4457,7 +4457,7 @@ qeth_send_packet(struct qeth_card *card, struct sk_buff *skb) queue = card->qdio.out_qs [qeth_get_priority_queue(card, skb, ipv, cast_type)]; - if (skb_shinfo(skb)->gso_size) + if (skb_is_gso(skb)) large_send = card->options.large_send; /*are we able to do TSO ? If so ,prepare and send it from here */ diff --git a/include/linux/netdevice.h b/include/linux/netdevice.h index 85f99f60dee..0359a643001 100644 --- a/include/linux/netdevice.h +++ b/include/linux/netdevice.h @@ -1001,7 +1001,7 @@ static inline int net_gso_ok(int features, int gso_type) static inline int skb_gso_ok(struct sk_buff *skb, int features) { - return net_gso_ok(features, skb_shinfo(skb)->gso_size ? + return net_gso_ok(features, skb_is_gso(skb) ? skb_shinfo(skb)->gso_type : 0); } diff --git a/include/linux/skbuff.h b/include/linux/skbuff.h index 3597b4f1438..0bf31b83578 100644 --- a/include/linux/skbuff.h +++ b/include/linux/skbuff.h @@ -1455,5 +1455,10 @@ static inline void skb_init_secmark(struct sk_buff *skb) { } #endif +static inline int skb_is_gso(const struct sk_buff *skb) +{ + return skb_shinfo(skb)->gso_size; +} + #endif /* __KERNEL__ */ #endif /* _LINUX_SKBUFF_H */ diff --git a/net/bridge/br_forward.c b/net/bridge/br_forward.c index 8be9f2123e5..6ccd32b3080 100644 --- a/net/bridge/br_forward.c +++ b/net/bridge/br_forward.c @@ -35,7 +35,7 @@ static inline unsigned packet_length(const struct sk_buff *skb) int br_dev_queue_push_xmit(struct sk_buff *skb) { /* drop mtu oversized packets except gso */ - if (packet_length(skb) > skb->dev->mtu && !skb_shinfo(skb)->gso_size) + if (packet_length(skb) > skb->dev->mtu && !skb_is_gso(skb)) kfree_skb(skb); else { #ifdef CONFIG_BRIDGE_NETFILTER diff --git a/net/bridge/br_netfilter.c b/net/bridge/br_netfilter.c index 8298a5179ae..cbc8a389a0a 100644 --- a/net/bridge/br_netfilter.c +++ b/net/bridge/br_netfilter.c @@ -761,7 +761,7 @@ static int br_nf_dev_queue_xmit(struct sk_buff *skb) { if (skb->protocol == htons(ETH_P_IP) && skb->len > skb->dev->mtu && - !skb_shinfo(skb)->gso_size) + !skb_is_gso(skb)) return ip_fragment(skb, br_dev_queue_push_xmit); else return br_dev_queue_push_xmit(skb); diff --git a/net/ipv4/ip_output.c b/net/ipv4/ip_output.c index ca0e714613f..7c9f9a6421b 100644 --- a/net/ipv4/ip_output.c +++ b/net/ipv4/ip_output.c @@ -209,7 +209,7 @@ static inline int ip_finish_output(struct sk_buff *skb) return dst_output(skb); } #endif - if (skb->len > dst_mtu(skb->dst) && !skb_shinfo(skb)->gso_size) + if (skb->len > dst_mtu(skb->dst) && !skb_is_gso(skb)) return ip_fragment(skb, ip_finish_output2); else return ip_finish_output2(skb); @@ -1095,7 +1095,7 @@ ssize_t ip_append_page(struct sock *sk, struct page *page, while (size > 0) { int i; - if (skb_shinfo(skb)->gso_size) + if (skb_is_gso(skb)) len = size; else { diff --git a/net/ipv4/xfrm4_output.c b/net/ipv4/xfrm4_output.c index 193363e2293..d16f863cf68 100644 --- a/net/ipv4/xfrm4_output.c +++ b/net/ipv4/xfrm4_output.c @@ -134,7 +134,7 @@ static int xfrm4_output_finish(struct sk_buff *skb) } #endif - if (!skb_shinfo(skb)->gso_size) + if (!skb_is_gso(skb)) return xfrm4_output_finish2(skb); skb->protocol = htons(ETH_P_IP); diff --git a/net/ipv6/ip6_output.c b/net/ipv6/ip6_output.c index 2c5b44575af..3bc74ce7880 100644 --- a/net/ipv6/ip6_output.c +++ b/net/ipv6/ip6_output.c @@ -147,7 +147,7 @@ static int ip6_output2(struct sk_buff *skb) int ip6_output(struct sk_buff *skb) { - if ((skb->len > dst_mtu(skb->dst) && !skb_shinfo(skb)->gso_size) || + if ((skb->len > dst_mtu(skb->dst) && !skb_is_gso(skb)) || dst_allfrag(skb->dst)) return ip6_fragment(skb, ip6_output2); else @@ -229,7 +229,7 @@ int ip6_xmit(struct sock *sk, struct sk_buff *skb, struct flowi *fl, skb->priority = sk->sk_priority; mtu = dst_mtu(dst); - if ((skb->len <= mtu) || ipfragok || skb_shinfo(skb)->gso_size) { + if ((skb->len <= mtu) || ipfragok || skb_is_gso(skb)) { IP6_INC_STATS(IPSTATS_MIB_OUTREQUESTS); return NF_HOOK(PF_INET6, NF_IP6_LOCAL_OUT, skb, NULL, dst->dev, dst_output); diff --git a/net/ipv6/xfrm6_output.c b/net/ipv6/xfrm6_output.c index 48fccb1eca0..0eea60ea9eb 100644 --- a/net/ipv6/xfrm6_output.c +++ b/net/ipv6/xfrm6_output.c @@ -122,7 +122,7 @@ static int xfrm6_output_finish(struct sk_buff *skb) { struct sk_buff *segs; - if (!skb_shinfo(skb)->gso_size) + if (!skb_is_gso(skb)) return xfrm6_output_finish2(skb); skb->protocol = htons(ETH_P_IP); -- cgit v1.2.3-70-g09d2 From 522536f6b24e63ac946259af65224f107dff7857 Mon Sep 17 00:00:00 2001 From: Larry Finger Date: Wed, 28 Jun 2006 19:11:21 -0500 Subject: [PATCH] bcm43xx-softmac: Fix an off-by-one condition in handle_irq_noise An assert statement near the start of handle_irq_noise in the softmac version of bcm43xx_main.c is there to protect against out of bound addressing using variable bcm->noisecalc.nr_samples. The arrays in question have a dimension of 8, thus the value must be < 8. Signed-Off-By: Larry.Finger Signed-off-by: John W. Linville --- drivers/net/wireless/bcm43xx/bcm43xx_main.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/net') diff --git a/drivers/net/wireless/bcm43xx/bcm43xx_main.c b/drivers/net/wireless/bcm43xx/bcm43xx_main.c index e1c5a939bca..3889f79e712 100644 --- a/drivers/net/wireless/bcm43xx/bcm43xx_main.c +++ b/drivers/net/wireless/bcm43xx/bcm43xx_main.c @@ -1547,7 +1547,7 @@ static void handle_irq_noise(struct bcm43xx_private *bcm) goto generate_new; /* Get the noise samples. */ - assert(bcm->noisecalc.nr_samples <= 8); + assert(bcm->noisecalc.nr_samples < 8); i = bcm->noisecalc.nr_samples; noise[0] = limit_value(noise[0], 0, ARRAY_SIZE(radio->nrssi_lt) - 1); noise[1] = limit_value(noise[1], 0, ARRAY_SIZE(radio->nrssi_lt) - 1); -- cgit v1.2.3-70-g09d2 From b312d799b324e895745ffe148def234fc60d5b74 Mon Sep 17 00:00:00 2001 From: Daniel Drake Date: Wed, 5 Jul 2006 15:57:39 +0100 Subject: [PATCH] zd1211rw: usb_clear_halt not allowed in IRQ context We will reimplement halt-clearing later, when we have periodic housekeeping routines in place. This will do as a temporary fix, the EPIPE case has not yet been seen. Signed-off-by: Daniel Drake Signed-off-by: John W. Linville --- drivers/net/wireless/zd1211rw/zd_usb.c | 12 +++--------- 1 file changed, 3 insertions(+), 9 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/wireless/zd1211rw/zd_usb.c b/drivers/net/wireless/zd1211rw/zd_usb.c index ce1cb2c6aa8..72f90525bf6 100644 --- a/drivers/net/wireless/zd1211rw/zd_usb.c +++ b/drivers/net/wireless/zd1211rw/zd_usb.c @@ -375,10 +375,8 @@ static void int_urb_complete(struct urb *urb, struct pt_regs *pt_regs) case -ENODEV: case -ENOENT: case -ECONNRESET: - goto kfree; case -EPIPE: - usb_clear_halt(urb->dev, EP_INT_IN); - /* FALL-THROUGH */ + goto kfree; default: goto resubmit; } @@ -580,10 +578,8 @@ static void rx_urb_complete(struct urb *urb, struct pt_regs *pt_regs) case -ENODEV: case -ENOENT: case -ECONNRESET: - return; case -EPIPE: - usb_clear_halt(urb->dev, EP_DATA_IN); - /* FALL-THROUGH */ + return; default: dev_dbg_f(urb_dev(urb), "urb %p error %d\n", urb, urb->status); goto resubmit; @@ -749,11 +745,9 @@ static void tx_urb_complete(struct urb *urb, struct pt_regs *pt_regs) case -ENODEV: case -ENOENT: case -ECONNRESET: + case -EPIPE: dev_dbg_f(urb_dev(urb), "urb %p error %d\n", urb, urb->status); break; - case -EPIPE: - usb_clear_halt(urb->dev, EP_DATA_OUT); - /* FALL-THROUGH */ default: dev_dbg_f(urb_dev(urb), "urb %p error %d\n", urb, urb->status); goto resubmit; -- cgit v1.2.3-70-g09d2 From 73ca66b97b73257a7d832d502c36fc19fe847809 Mon Sep 17 00:00:00 2001 From: Magnus Damm Date: Mon, 10 Jul 2006 04:44:09 -0700 Subject: [PATCH] release_firmware() fixes Use release_firmware() to free requested resources. According to Documentation/firmware_class/README the request_firmware() call should be followed by a release_firmware(). Some drivers do not however free the firmware previously allocated with request_firmware(). This patch tries to fix this by making sure that release_firmware() is used as expected. Signed-off-by: Magnus Damm Acked-by: Marcel Holtmann Cc: Mauro Carvalho Chehab Cc: "John W. Linville" Cc: Greg KH Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/bluetooth/bcm203x.c | 1 + drivers/media/dvb/frontends/nxt200x.c | 4 ++-- drivers/media/dvb/frontends/or51211.c | 2 +- drivers/media/dvb/frontends/sp8870.c | 2 +- drivers/media/dvb/frontends/sp887x.c | 2 +- drivers/media/video/cx88/cx88-blackbird.c | 3 +++ drivers/net/wireless/spectrum_cs.c | 37 +++++++++++++------------------ 7 files changed, 25 insertions(+), 26 deletions(-) (limited to 'drivers/net') diff --git a/drivers/bluetooth/bcm203x.c b/drivers/bluetooth/bcm203x.c index 6f67141f4de..13ba729cdd5 100644 --- a/drivers/bluetooth/bcm203x.c +++ b/drivers/bluetooth/bcm203x.c @@ -234,6 +234,7 @@ static int bcm203x_probe(struct usb_interface *intf, const struct usb_device_id data->fw_data = kmalloc(firmware->size, GFP_KERNEL); if (!data->fw_data) { BT_ERR("Can't allocate memory for firmware image"); + release_firmware(firmware); usb_free_urb(data->urb); kfree(data->buffer); kfree(data); diff --git a/drivers/media/dvb/frontends/nxt200x.c b/drivers/media/dvb/frontends/nxt200x.c index 55671cb5255..87c286ee6a0 100644 --- a/drivers/media/dvb/frontends/nxt200x.c +++ b/drivers/media/dvb/frontends/nxt200x.c @@ -896,9 +896,9 @@ static int nxt2002_init(struct dvb_frontend* fe) } ret = nxt2002_load_firmware(fe, fw); + release_firmware(fw); if (ret) { printk("nxt2002: Writing firmware to device failed\n"); - release_firmware(fw); return ret; } printk("nxt2002: Firmware upload complete\n"); @@ -960,9 +960,9 @@ static int nxt2004_init(struct dvb_frontend* fe) } ret = nxt2004_load_firmware(fe, fw); + release_firmware(fw); if (ret) { printk("nxt2004: Writing firmware to device failed\n"); - release_firmware(fw); return ret; } printk("nxt2004: Firmware upload complete\n"); diff --git a/drivers/media/dvb/frontends/or51211.c b/drivers/media/dvb/frontends/or51211.c index 26bed616fab..2bf124b5368 100644 --- a/drivers/media/dvb/frontends/or51211.c +++ b/drivers/media/dvb/frontends/or51211.c @@ -437,10 +437,10 @@ static int or51211_init(struct dvb_frontend* fe) } ret = or51211_load_firmware(fe, fw); + release_firmware(fw); if (ret) { printk(KERN_WARNING "or51211: Writing firmware to " "device failed!\n"); - release_firmware(fw); return ret; } printk(KERN_INFO "or51211: Firmware upload complete.\n"); diff --git a/drivers/media/dvb/frontends/sp8870.c b/drivers/media/dvb/frontends/sp8870.c index 44ec5b9a469..d98fd5c2e13 100644 --- a/drivers/media/dvb/frontends/sp8870.c +++ b/drivers/media/dvb/frontends/sp8870.c @@ -318,7 +318,6 @@ static int sp8870_init (struct dvb_frontend* fe) printk("sp8870: waiting for firmware upload (%s)...\n", SP8870_DEFAULT_FIRMWARE); if (state->config->request_firmware(fe, &fw, SP8870_DEFAULT_FIRMWARE)) { printk("sp8870: no firmware upload (timeout or file not found?)\n"); - release_firmware(fw); return -EIO; } @@ -327,6 +326,7 @@ static int sp8870_init (struct dvb_frontend* fe) release_firmware(fw); return -EIO; } + release_firmware(fw); printk("sp8870: firmware upload complete\n"); /* enable TS output and interface pins */ diff --git a/drivers/media/dvb/frontends/sp887x.c b/drivers/media/dvb/frontends/sp887x.c index b0a2b02f660..5c2f8f4e0ae 100644 --- a/drivers/media/dvb/frontends/sp887x.c +++ b/drivers/media/dvb/frontends/sp887x.c @@ -520,9 +520,9 @@ static int sp887x_init(struct dvb_frontend* fe) } ret = sp887x_initial_setup(fe, fw); + release_firmware(fw); if (ret) { printk("sp887x: writing firmware to device failed\n"); - release_firmware(fw); return ret; } printk("sp887x: firmware upload complete\n"); diff --git a/drivers/media/video/cx88/cx88-blackbird.c b/drivers/media/video/cx88/cx88-blackbird.c index 349632b48e9..b60177f173c 100644 --- a/drivers/media/video/cx88/cx88-blackbird.c +++ b/drivers/media/video/cx88/cx88-blackbird.c @@ -453,11 +453,13 @@ static int blackbird_load_firmware(struct cx8802_dev *dev) if (firmware->size != BLACKBIRD_FIRM_IMAGE_SIZE) { dprintk(0, "ERROR: Firmware size mismatch (have %zd, expected %d)\n", firmware->size, BLACKBIRD_FIRM_IMAGE_SIZE); + release_firmware(firmware); return -1; } if (0 != memcmp(firmware->data, magic, 8)) { dprintk(0, "ERROR: Firmware magic mismatch, wrong file?\n"); + release_firmware(firmware); return -1; } @@ -478,6 +480,7 @@ static int blackbird_load_firmware(struct cx8802_dev *dev) } if (checksum) { dprintk(0, "ERROR: Firmware load failed (checksum mismatch).\n"); + release_firmware(firmware); return -1; } release_firmware(firmware); diff --git a/drivers/net/wireless/spectrum_cs.c b/drivers/net/wireless/spectrum_cs.c index 15465278c78..7f78b7801fb 100644 --- a/drivers/net/wireless/spectrum_cs.c +++ b/drivers/net/wireless/spectrum_cs.c @@ -34,8 +34,6 @@ #include "orinoco.h" -static unsigned char *primsym; -static unsigned char *secsym; static const char primary_fw_name[] = "symbol_sp24t_prim_fw"; static const char secondary_fw_name[] = "symbol_sp24t_sec_fw"; @@ -440,7 +438,7 @@ spectrum_load_blocks(hermes_t *hw, const struct dblock *first_block) */ static int spectrum_dl_image(hermes_t *hw, struct pcmcia_device *link, - const unsigned char *image) + const unsigned char *image, int secondary) { int ret; const unsigned char *ptr; @@ -455,7 +453,7 @@ spectrum_dl_image(hermes_t *hw, struct pcmcia_device *link, first_block = (const struct dblock *) ptr; /* Read the PDA */ - if (image != primsym) { + if (secondary) { ret = spectrum_read_pda(hw, pda, sizeof(pda)); if (ret) return ret; @@ -472,7 +470,7 @@ spectrum_dl_image(hermes_t *hw, struct pcmcia_device *link, return ret; /* Write the PDA to the adapter */ - if (image != primsym) { + if (secondary) { ret = spectrum_apply_pda(hw, first_block, pda); if (ret) return ret; @@ -487,7 +485,7 @@ spectrum_dl_image(hermes_t *hw, struct pcmcia_device *link, ret = hermes_init(hw); /* hermes_reset() should return 0 with the secondary firmware */ - if (image != primsym && ret != 0) + if (secondary && ret != 0) return -ENODEV; /* And this should work with any firmware */ @@ -509,33 +507,30 @@ spectrum_dl_firmware(hermes_t *hw, struct pcmcia_device *link) const struct firmware *fw_entry; if (request_firmware(&fw_entry, primary_fw_name, - &handle_to_dev(link)) == 0) { - primsym = fw_entry->data; - } else { + &handle_to_dev(link)) != 0) { printk(KERN_ERR PFX "Cannot find firmware: %s\n", primary_fw_name); return -ENOENT; } - if (request_firmware(&fw_entry, secondary_fw_name, - &handle_to_dev(link)) == 0) { - secsym = fw_entry->data; - } else { - printk(KERN_ERR PFX "Cannot find firmware: %s\n", - secondary_fw_name); - return -ENOENT; - } - /* Load primary firmware */ - ret = spectrum_dl_image(hw, link, primsym); + ret = spectrum_dl_image(hw, link, fw_entry->data, 0); + release_firmware(fw_entry); if (ret) { printk(KERN_ERR PFX "Primary firmware download failed\n"); return ret; } - /* Load secondary firmware */ - ret = spectrum_dl_image(hw, link, secsym); + if (request_firmware(&fw_entry, secondary_fw_name, + &handle_to_dev(link)) != 0) { + printk(KERN_ERR PFX "Cannot find firmware: %s\n", + secondary_fw_name); + return -ENOENT; + } + /* Load secondary firmware */ + ret = spectrum_dl_image(hw, link, fw_entry->data, 1); + release_firmware(fw_entry); if (ret) { printk(KERN_ERR PFX "Secondary firmware download failed\n"); } -- cgit v1.2.3-70-g09d2 From 1eeb7e42888b3bde403596eebdbd64452a53f4d5 Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Mon, 10 Jul 2006 11:24:46 -0700 Subject: [BPQ] lockdep: fix false positive Bpqether is encapsulating AX.25 frames into ethernet frames. There is a virtual bpqether device paired with each ethernet devices, so it's normal to pass through dev_queue_xmit twice for each frame which triggers the locking detector. Signed-off-by: Ralf Baechle Signed-off-by: David S. Miller --- drivers/net/hamradio/bpqether.c | 7 +++++++ 1 file changed, 7 insertions(+) (limited to 'drivers/net') diff --git a/drivers/net/hamradio/bpqether.c b/drivers/net/hamradio/bpqether.c index 0641f54fc63..889f338132f 100644 --- a/drivers/net/hamradio/bpqether.c +++ b/drivers/net/hamradio/bpqether.c @@ -122,6 +122,12 @@ struct bpqdev { static LIST_HEAD(bpq_devices); +/* + * bpqether network devices are paired with ethernet devices below them, so + * form a special "super class" of normal ethernet devices; split their locks + * off into a separate class since they always nest. + */ +static struct lock_class_key bpq_netdev_xmit_lock_key; /* ------------------------------------------------------------------------ */ @@ -528,6 +534,7 @@ static int bpq_new_device(struct net_device *edev) err = register_netdevice(ndev); if (err) goto error; + lockdep_set_class(&ndev->_xmit_lock, &bpq_netdev_xmit_lock_key); /* List protected by RTNL */ list_add_rcu(&bpq->bpq_list, &bpq_devices); -- cgit v1.2.3-70-g09d2 From c2ce920468624d87ec5f91f080ea99681dae6d88 Mon Sep 17 00:00:00 2001 From: Krzysztof Halasa Date: Wed, 12 Jul 2006 13:46:12 -0700 Subject: [WAN]: converting generic HDLC to use netif_dormant*() This patch converts generic HDLC (and WAN drivers using it) from hdlc_set_carrier() to netif_dormant*() interface. WAN hardware drivers should now use netif_carrier_on|off() like other network drivers. Signed-off-by: Krzysztof Halasa Signed-off-by: David S. Miller --- drivers/net/wan/c101.c | 26 ++++++++++------- drivers/net/wan/hd6457x.c | 26 +++++++++++++---- drivers/net/wan/hdlc_cisco.c | 14 +++------ drivers/net/wan/hdlc_fr.c | 14 ++------- drivers/net/wan/hdlc_generic.c | 65 +++++++++++++++++++++++------------------- drivers/net/wan/wanxl.c | 5 +++- include/linux/hdlc.h | 2 -- 7 files changed, 82 insertions(+), 70 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/wan/c101.c b/drivers/net/wan/c101.c index c92ac9fde08..2c09ec908a3 100644 --- a/drivers/net/wan/c101.c +++ b/drivers/net/wan/c101.c @@ -116,27 +116,33 @@ static inline void openwin(card_t *card, u8 page) #include "hd6457x.c" +static inline void set_carrier(port_t *port) +{ + if (!sca_in(MSCI1_OFFSET + ST3, port) & ST3_DCD) + netif_carrier_on(port_to_dev(port)); + else + netif_carrier_off(port_to_dev(port)); +} + + static void sca_msci_intr(port_t *port) { - struct net_device *dev = port_to_dev(port); - card_t* card = port_to_card(port); - u8 stat = sca_in(MSCI1_OFFSET + ST1, card); /* read MSCI ST1 status */ + u8 stat = sca_in(MSCI1_OFFSET + ST1, port); /* read MSCI ST1 status */ /* Reset MSCI TX underrun status bit */ - sca_out(stat & ST1_UDRN, MSCI0_OFFSET + ST1, card); + sca_out(stat & ST1_UDRN, MSCI0_OFFSET + ST1, port); if (stat & ST1_UDRN) { - struct net_device_stats *stats = hdlc_stats(dev); + struct net_device_stats *stats = hdlc_stats(port_to_dev(port)); stats->tx_errors++; /* TX Underrun error detected */ stats->tx_fifo_errors++; } /* Reset MSCI CDCD status bit - uses ch#2 DCD input */ - sca_out(stat & ST1_CDCD, MSCI1_OFFSET + ST1, card); + sca_out(stat & ST1_CDCD, MSCI1_OFFSET + ST1, port); if (stat & ST1_CDCD) - hdlc_set_carrier(!(sca_in(MSCI1_OFFSET + ST3, card) & ST3_DCD), - dev); + set_carrier(port); } @@ -190,7 +196,7 @@ static int c101_open(struct net_device *dev) sca_out(IE1_UDRN, MSCI0_OFFSET + IE1, port); sca_out(IE0_TXINT, MSCI0_OFFSET + IE0, port); - hdlc_set_carrier(!(sca_in(MSCI1_OFFSET + ST3, port) & ST3_DCD), dev); + set_carrier(port); printk(KERN_DEBUG "0x%X\n", sca_in(MSCI1_OFFSET + ST3, port)); /* enable MSCI1 CDCD interrupt */ @@ -378,7 +384,7 @@ static int __init c101_run(unsigned long irq, unsigned long winbase) } sca_init_sync_port(card); /* Set up C101 memory */ - hdlc_set_carrier(!(sca_in(MSCI1_OFFSET + ST3, card) & ST3_DCD), dev); + set_carrier(card); printk(KERN_INFO "%s: Moxa C101 on IRQ%u," " using %u TX + %u RX packets rings\n", diff --git a/drivers/net/wan/hd6457x.c b/drivers/net/wan/hd6457x.c index d3743321a97..dce2bb317b8 100644 --- a/drivers/net/wan/hd6457x.c +++ b/drivers/net/wan/hd6457x.c @@ -168,6 +168,23 @@ static inline u32 buffer_offset(port_t *port, u16 desc, int transmit) } +static inline void sca_set_carrier(port_t *port) +{ + if (!(sca_in(get_msci(port) + ST3, port_to_card(port)) & ST3_DCD)) { +#ifdef DEBUG_LINK + printk(KERN_DEBUG "%s: sca_set_carrier on\n", + port_to_dev(port)->name); +#endif + netif_carrier_on(port_to_dev(port)); + } else { +#ifdef DEBUG_LINK + printk(KERN_DEBUG "%s: sca_set_carrier off\n", + port_to_dev(port)->name); +#endif + netif_carrier_off(port_to_dev(port)); + } +} + static void sca_init_sync_port(port_t *port) { @@ -237,9 +254,7 @@ static void sca_init_sync_port(port_t *port) sca_out(DIR_BOFE, DIR_TX(phy_node(port)), card); } } - - hdlc_set_carrier(!(sca_in(get_msci(port) + ST3, card) & ST3_DCD), - port_to_dev(port)); + sca_set_carrier(port); } @@ -262,8 +277,7 @@ static inline void sca_msci_intr(port_t *port) } if (stat & ST1_CDCD) - hdlc_set_carrier(!(sca_in(msci + ST3, card) & ST3_DCD), - port_to_dev(port)); + sca_set_carrier(port); } #endif @@ -566,7 +580,7 @@ static void sca_open(struct net_device *dev) - all DMA interrupts */ - hdlc_set_carrier(!(sca_in(msci + ST3, card) & ST3_DCD), dev); + sca_set_carrier(port); #ifdef __HD64570_H /* MSCI TX INT and RX INT A IRQ enable */ diff --git a/drivers/net/wan/hdlc_cisco.c b/drivers/net/wan/hdlc_cisco.c index 1fd04662c4f..f289daba0c7 100644 --- a/drivers/net/wan/hdlc_cisco.c +++ b/drivers/net/wan/hdlc_cisco.c @@ -192,9 +192,7 @@ static int cisco_rx(struct sk_buff *skb) "uptime %ud%uh%um%us)\n", dev->name, days, hrs, min, sec); -#if 0 - netif_carrier_on(dev); -#endif + netif_dormant_off(dev); hdlc->state.cisco.up = 1; } } @@ -227,9 +225,7 @@ static void cisco_timer(unsigned long arg) hdlc->state.cisco.settings.timeout * HZ)) { hdlc->state.cisco.up = 0; printk(KERN_INFO "%s: Link down\n", dev->name); -#if 0 - netif_carrier_off(dev); -#endif + netif_dormant_on(dev); } cisco_keepalive_send(dev, CISCO_KEEPALIVE_REQ, @@ -265,10 +261,7 @@ static void cisco_stop(struct net_device *dev) { hdlc_device *hdlc = dev_to_hdlc(dev); del_timer_sync(&hdlc->state.cisco.timer); -#if 0 - if (netif_carrier_ok(dev)) - netif_carrier_off(dev); -#endif + netif_dormant_on(dev); hdlc->state.cisco.up = 0; hdlc->state.cisco.request_sent = 0; } @@ -328,6 +321,7 @@ int hdlc_cisco_ioctl(struct net_device *dev, struct ifreq *ifr) dev->type = ARPHRD_CISCO; dev->flags = IFF_POINTOPOINT | IFF_NOARP; dev->addr_len = 0; + netif_dormant_on(dev); return 0; } diff --git a/drivers/net/wan/hdlc_fr.c b/drivers/net/wan/hdlc_fr.c index 523afe17564..7bb737bbdeb 100644 --- a/drivers/net/wan/hdlc_fr.c +++ b/drivers/net/wan/hdlc_fr.c @@ -301,7 +301,7 @@ static int pvc_open(struct net_device *dev) if (pvc->open_count++ == 0) { hdlc_device *hdlc = dev_to_hdlc(pvc->master); if (hdlc->state.fr.settings.lmi == LMI_NONE) - pvc->state.active = hdlc->carrier; + pvc->state.active = netif_carrier_ok(pvc->master); pvc_carrier(pvc->state.active, pvc); hdlc->state.fr.dce_changed = 1; @@ -545,11 +545,7 @@ static void fr_set_link_state(int reliable, struct net_device *dev) hdlc->state.fr.reliable = reliable; if (reliable) { -#if 0 - if (!netif_carrier_ok(dev)) - netif_carrier_on(dev); -#endif - + netif_dormant_off(dev); hdlc->state.fr.n391cnt = 0; /* Request full status */ hdlc->state.fr.dce_changed = 1; @@ -562,11 +558,7 @@ static void fr_set_link_state(int reliable, struct net_device *dev) } } } else { -#if 0 - if (netif_carrier_ok(dev)) - netif_carrier_off(dev); -#endif - + netif_dormant_on(dev); while (pvc) { /* Deactivate all PVCs */ pvc_carrier(0, pvc); pvc->state.exist = pvc->state.active = 0; diff --git a/drivers/net/wan/hdlc_generic.c b/drivers/net/wan/hdlc_generic.c index b7da55140fb..04ca1f7b642 100644 --- a/drivers/net/wan/hdlc_generic.c +++ b/drivers/net/wan/hdlc_generic.c @@ -34,10 +34,11 @@ #include #include #include +#include #include -static const char* version = "HDLC support module revision 1.18"; +static const char* version = "HDLC support module revision 1.19"; #undef DEBUG_LINK @@ -73,57 +74,51 @@ static int hdlc_rcv(struct sk_buff *skb, struct net_device *dev, -static void __hdlc_set_carrier_on(struct net_device *dev) +static inline void hdlc_proto_start(struct net_device *dev) { hdlc_device *hdlc = dev_to_hdlc(dev); if (hdlc->proto.start) return hdlc->proto.start(dev); -#if 0 -#ifdef DEBUG_LINK - if (netif_carrier_ok(dev)) - printk(KERN_ERR "hdlc_set_carrier_on(): already on\n"); -#endif - netif_carrier_on(dev); -#endif } -static void __hdlc_set_carrier_off(struct net_device *dev) +static inline void hdlc_proto_stop(struct net_device *dev) { hdlc_device *hdlc = dev_to_hdlc(dev); if (hdlc->proto.stop) return hdlc->proto.stop(dev); - -#if 0 -#ifdef DEBUG_LINK - if (!netif_carrier_ok(dev)) - printk(KERN_ERR "hdlc_set_carrier_off(): already off\n"); -#endif - netif_carrier_off(dev); -#endif } -void hdlc_set_carrier(int on, struct net_device *dev) +static int hdlc_device_event(struct notifier_block *this, unsigned long event, + void *ptr) { - hdlc_device *hdlc = dev_to_hdlc(dev); + struct net_device *dev = ptr; + hdlc_device *hdlc; unsigned long flags; - on = on ? 1 : 0; + int on; + + if (dev->get_stats != hdlc_get_stats) + return NOTIFY_DONE; /* not an HDLC device */ + + if (event != NETDEV_CHANGE) + return NOTIFY_DONE; /* Only interrested in carrier changes */ + + on = netif_carrier_ok(dev); #ifdef DEBUG_LINK - printk(KERN_DEBUG "hdlc_set_carrier %i\n", on); + printk(KERN_DEBUG "%s: hdlc_device_event NETDEV_CHANGE, carrier %i\n", + dev->name, on); #endif + hdlc = dev_to_hdlc(dev); spin_lock_irqsave(&hdlc->state_lock, flags); if (hdlc->carrier == on) goto carrier_exit; /* no change in DCD line level */ -#ifdef DEBUG_LINK - printk(KERN_INFO "%s: carrier %s\n", dev->name, on ? "ON" : "off"); -#endif hdlc->carrier = on; if (!hdlc->open) @@ -131,14 +126,15 @@ void hdlc_set_carrier(int on, struct net_device *dev) if (hdlc->carrier) { printk(KERN_INFO "%s: Carrier detected\n", dev->name); - __hdlc_set_carrier_on(dev); + hdlc_proto_start(dev); } else { printk(KERN_INFO "%s: Carrier lost\n", dev->name); - __hdlc_set_carrier_off(dev); + hdlc_proto_stop(dev); } carrier_exit: spin_unlock_irqrestore(&hdlc->state_lock, flags); + return NOTIFY_DONE; } @@ -165,7 +161,7 @@ int hdlc_open(struct net_device *dev) if (hdlc->carrier) { printk(KERN_INFO "%s: Carrier detected\n", dev->name); - __hdlc_set_carrier_on(dev); + hdlc_proto_start(dev); } else printk(KERN_INFO "%s: No carrier\n", dev->name); @@ -190,7 +186,7 @@ void hdlc_close(struct net_device *dev) hdlc->open = 0; if (hdlc->carrier) - __hdlc_set_carrier_off(dev); + hdlc_proto_stop(dev); spin_unlock_irq(&hdlc->state_lock); @@ -303,7 +299,6 @@ MODULE_LICENSE("GPL v2"); EXPORT_SYMBOL(hdlc_open); EXPORT_SYMBOL(hdlc_close); -EXPORT_SYMBOL(hdlc_set_carrier); EXPORT_SYMBOL(hdlc_ioctl); EXPORT_SYMBOL(hdlc_setup); EXPORT_SYMBOL(alloc_hdlcdev); @@ -315,9 +310,18 @@ static struct packet_type hdlc_packet_type = { }; +static struct notifier_block hdlc_notifier = { + .notifier_call = hdlc_device_event, +}; + + static int __init hdlc_module_init(void) { + int result; + printk(KERN_INFO "%s\n", version); + if ((result = register_netdevice_notifier(&hdlc_notifier)) != 0) + return result; dev_add_pack(&hdlc_packet_type); return 0; } @@ -327,6 +331,7 @@ static int __init hdlc_module_init(void) static void __exit hdlc_module_exit(void) { dev_remove_pack(&hdlc_packet_type); + unregister_netdevice_notifier(&hdlc_notifier); } diff --git a/drivers/net/wan/wanxl.c b/drivers/net/wan/wanxl.c index d564224cdca..b2031dfc4bb 100644 --- a/drivers/net/wan/wanxl.c +++ b/drivers/net/wan/wanxl.c @@ -149,7 +149,10 @@ static inline void wanxl_cable_intr(port_t *port) printk(KERN_INFO "%s: %s%s module, %s cable%s%s\n", port->dev->name, pm, dte, cable, dsr, dcd); - hdlc_set_carrier(value & STATUS_CABLE_DCD, port->dev); + if (value & STATUS_CABLE_DCD) + netif_carrier_on(port->dev); + else + netif_carrier_off(port->dev); } diff --git a/include/linux/hdlc.h b/include/linux/hdlc.h index 4513f9e4093..d5ebbb29aea 100644 --- a/include/linux/hdlc.h +++ b/include/linux/hdlc.h @@ -224,8 +224,6 @@ static __inline__ void debug_frame(const struct sk_buff *skb) int hdlc_open(struct net_device *dev); /* Must be called by hardware driver when HDLC device is being closed */ void hdlc_close(struct net_device *dev); -/* Called by hardware driver when DCD line level changes */ -void hdlc_set_carrier(int on, struct net_device *dev); /* May be used by hardware driver to gain control over HDLC device */ static __inline__ void hdlc_proto_detach(hdlc_device *hdlc) -- cgit v1.2.3-70-g09d2 From 9744e218aad2ef4569b0de960ff193fb50f5d6e0 Mon Sep 17 00:00:00 2001 From: Ayaz Abdulla Date: Thu, 6 Jul 2006 16:45:58 -0400 Subject: [PATCH] forcedeth: deferral fixup This patch adds the definition for the deferral registers and fixes up the use of these registers. Signed-Off-By: Ayaz Abdulla Signed-off-by: Jeff Garzik --- drivers/net/forcedeth.c | 26 +++++++++++++++++++------- 1 file changed, 19 insertions(+), 7 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/forcedeth.c b/drivers/net/forcedeth.c index ad81ec68f88..1a315d09d95 100644 --- a/drivers/net/forcedeth.c +++ b/drivers/net/forcedeth.c @@ -240,10 +240,12 @@ enum { #define NVREG_RNDSEED_FORCE2 0x2d00 #define NVREG_RNDSEED_FORCE3 0x7400 - NvRegUnknownSetupReg1 = 0xA0, -#define NVREG_UNKSETUP1_VAL 0x16070f - NvRegUnknownSetupReg2 = 0xA4, -#define NVREG_UNKSETUP2_VAL 0x16 + NvRegTxDeferral = 0xA0, +#define NVREG_TX_DEFERRAL_DEFAULT 0x15050f +#define NVREG_TX_DEFERRAL_RGMII_10_100 0x16070f +#define NVREG_TX_DEFERRAL_RGMII_1000 0x14050f + NvRegRxDeferral = 0xA4, +#define NVREG_RX_DEFERRAL_DEFAULT 0x16 NvRegMacAddrA = 0xA8, NvRegMacAddrB = 0xAC, NvRegMulticastAddrA = 0xB0, @@ -2127,7 +2129,7 @@ static int nv_update_linkspeed(struct net_device *dev) int newdup = np->duplex; int mii_status; int retval = 0; - u32 control_1000, status_1000, phyreg, pause_flags; + u32 control_1000, status_1000, phyreg, pause_flags, txreg; /* BMSR_LSTATUS is latched, read it twice: * we want the current value. @@ -2245,6 +2247,16 @@ set_speed: phyreg |= PHY_1000; writel(phyreg, base + NvRegPhyInterface); + if (phyreg & PHY_RGMII) { + if ((np->linkspeed & NVREG_LINKSPEED_MASK) == NVREG_LINKSPEED_1000) + txreg = NVREG_TX_DEFERRAL_RGMII_1000; + else + txreg = NVREG_TX_DEFERRAL_RGMII_10_100; + } else { + txreg = NVREG_TX_DEFERRAL_DEFAULT; + } + writel(txreg, base + NvRegTxDeferral); + writel(NVREG_MISC1_FORCE | ( np->duplex ? 0 : NVREG_MISC1_HD), base + NvRegMisc1); pci_push(base); @@ -3932,8 +3944,8 @@ static int nv_open(struct net_device *dev) writel(readl(base + NvRegReceiverStatus), base + NvRegReceiverStatus); get_random_bytes(&i, sizeof(i)); writel(NVREG_RNDSEED_FORCE | (i&NVREG_RNDSEED_MASK), base + NvRegRandomSeed); - writel(NVREG_UNKSETUP1_VAL, base + NvRegUnknownSetupReg1); - writel(NVREG_UNKSETUP2_VAL, base + NvRegUnknownSetupReg2); + writel(NVREG_TX_DEFERRAL_DEFAULT, base + NvRegTxDeferral); + writel(NVREG_RX_DEFERRAL_DEFAULT, base + NvRegRxDeferral); if (poll_interval == -1) { if (optimization_mode == NV_OPTIMIZATION_MODE_THROUGHPUT) writel(NVREG_POLL_DEFAULT_THROUGHPUT, base + NvRegPollingInterval); -- cgit v1.2.3-70-g09d2 From 95d161cbab9d4da8b3c2d179ae11825e1294989e Mon Sep 17 00:00:00 2001 From: Ayaz Abdulla Date: Thu, 6 Jul 2006 16:46:25 -0400 Subject: [PATCH] forcedeth: watermark fixup This patch defines the watermark registers and fixes up the use of this register. Signed-Off-By: Ayaz Abdulla Signed-off-by: Jeff Garzik --- drivers/net/forcedeth.c | 23 +++++++++++++++++++---- 1 file changed, 19 insertions(+), 4 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/forcedeth.c b/drivers/net/forcedeth.c index 1a315d09d95..11b8f1b43dd 100644 --- a/drivers/net/forcedeth.c +++ b/drivers/net/forcedeth.c @@ -271,8 +271,10 @@ enum { #define NVREG_LINKSPEED_MASK (0xFFF) NvRegUnknownSetupReg5 = 0x130, #define NVREG_UNKSETUP5_BIT31 (1<<31) - NvRegUnknownSetupReg3 = 0x13c, -#define NVREG_UNKSETUP3_VAL1 0x200010 + NvRegTxWatermark = 0x13c, +#define NVREG_TX_WM_DESC1_DEFAULT 0x0200010 +#define NVREG_TX_WM_DESC2_3_DEFAULT 0x1e08000 +#define NVREG_TX_WM_DESC2_3_1000 0xfe08000 NvRegTxRxControl = 0x144, #define NVREG_TXRXCTL_KICK 0x0001 #define NVREG_TXRXCTL_BIT1 0x0002 @@ -660,7 +662,7 @@ static const struct register_test nv_registers_test[] = { { NvRegMisc1, 0x03c }, { NvRegOffloadConfig, 0x03ff }, { NvRegMulticastAddrA, 0xffffffff }, - { NvRegUnknownSetupReg3, 0x0ff }, + { NvRegTxWatermark, 0x0ff }, { NvRegWakeUpFlags, 0x07777 }, { 0,0 } }; @@ -2257,6 +2259,16 @@ set_speed: } writel(txreg, base + NvRegTxDeferral); + if (np->desc_ver == DESC_VER_1) { + txreg = NVREG_TX_WM_DESC1_DEFAULT; + } else { + if ((np->linkspeed & NVREG_LINKSPEED_MASK) == NVREG_LINKSPEED_1000) + txreg = NVREG_TX_WM_DESC2_3_1000; + else + txreg = NVREG_TX_WM_DESC2_3_DEFAULT; + } + writel(txreg, base + NvRegTxWatermark); + writel(NVREG_MISC1_FORCE | ( np->duplex ? 0 : NVREG_MISC1_HD), base + NvRegMisc1); pci_push(base); @@ -3922,7 +3934,10 @@ static int nv_open(struct net_device *dev) /* 5) continue setup */ writel(np->linkspeed, base + NvRegLinkSpeed); - writel(NVREG_UNKSETUP3_VAL1, base + NvRegUnknownSetupReg3); + if (np->desc_ver == DESC_VER_1) + writel(NVREG_TX_WM_DESC1_DEFAULT, base + NvRegTxWatermark); + else + writel(NVREG_TX_WM_DESC2_3_DEFAULT, base + NvRegTxWatermark); writel(np->txrxctl_bits, base + NvRegTxRxControl); writel(np->vlanctl_bits, base + NvRegVlanControl); pci_push(base); -- cgit v1.2.3-70-g09d2 From 61ef5c00a6477e076b8b77be805c5f58b77539cf Mon Sep 17 00:00:00 2001 From: Andrew Morton Date: Thu, 6 Jul 2006 23:58:19 -0700 Subject: [PATCH] e1000: irq naming update Use the new names. Cc: Auke Kok Cc: Jeff Garzik Signed-off-by: Andrew Morton Signed-off-by: Jeff Garzik --- drivers/net/e1000/e1000_main.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/net') diff --git a/drivers/net/e1000/e1000_main.c b/drivers/net/e1000/e1000_main.c index 6e7d31bacf4..6d3d4193450 100644 --- a/drivers/net/e1000/e1000_main.c +++ b/drivers/net/e1000/e1000_main.c @@ -283,7 +283,7 @@ static int e1000_request_irq(struct e1000_adapter *adapter) } } if (adapter->have_msi) - flags &= ~SA_SHIRQ; + flags &= ~IRQF_SHARED; #endif if ((err = request_irq(adapter->pdev->irq, &e1000_intr, flags, netdev->name, netdev))) -- cgit v1.2.3-70-g09d2 From e6a8fee2098f29749e4e48321611f2d661b2eb71 Mon Sep 17 00:00:00 2001 From: Ananda Raju Date: Thu, 6 Jul 2006 23:58:23 -0700 Subject: [PATCH] s2io driver irq fix Modification and bug fixes with respect to irq registration. - Enable interrupts after request_irq - Restored MSI data register value at driver unload time Signed-off-by: Ananda Raju Cc: Jeff Garzik Signed-off-by: Andrew Morton Signed-off-by: Jeff Garzik --- drivers/net/s2io.c | 285 +++++++++++++++++++++++++++-------------------------- drivers/net/s2io.h | 5 +- 2 files changed, 145 insertions(+), 145 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/s2io.c b/drivers/net/s2io.c index c6b77acb35e..e1fe3a0a7b0 100644 --- a/drivers/net/s2io.c +++ b/drivers/net/s2io.c @@ -1976,7 +1976,6 @@ static int start_nic(struct s2io_nic *nic) XENA_dev_config_t __iomem *bar0 = nic->bar0; struct net_device *dev = nic->dev; register u64 val64 = 0; - u16 interruptible; u16 subid, i; mac_info_t *mac_control; struct config_param *config; @@ -2047,16 +2046,6 @@ static int start_nic(struct s2io_nic *nic) return FAILURE; } - /* Enable select interrupts */ - if (nic->intr_type != INTA) - en_dis_able_nic_intrs(nic, ENA_ALL_INTRS, DISABLE_INTRS); - else { - interruptible = TX_TRAFFIC_INTR | RX_TRAFFIC_INTR; - interruptible |= TX_PIC_INTR | RX_PIC_INTR; - interruptible |= TX_MAC_INTR | RX_MAC_INTR; - en_dis_able_nic_intrs(nic, interruptible, ENABLE_INTRS); - } - /* * With some switches, link might be already up at this point. * Because of this weird behavior, when we enable laser, @@ -3749,101 +3738,19 @@ static int s2io_open(struct net_device *dev) if (err) { DBG_PRINT(ERR_DBG, "%s: H/W initialization failed\n", dev->name); - if (err == -ENODEV) - goto hw_init_failed; - else - goto hw_enable_failed; - } - - /* Store the values of the MSIX table in the nic_t structure */ - store_xmsi_data(sp); - - /* After proper initialization of H/W, register ISR */ - if (sp->intr_type == MSI) { - err = request_irq((int) sp->pdev->irq, s2io_msi_handle, - IRQF_SHARED, sp->name, dev); - if (err) { - DBG_PRINT(ERR_DBG, "%s: MSI registration \ -failed\n", dev->name); - goto isr_registration_failed; - } - } - if (sp->intr_type == MSI_X) { - int i; - - for (i=1; (sp->s2io_entries[i].in_use == MSIX_FLG); i++) { - if (sp->s2io_entries[i].type == MSIX_FIFO_TYPE) { - sprintf(sp->desc1, "%s:MSI-X-%d-TX", - dev->name, i); - err = request_irq(sp->entries[i].vector, - s2io_msix_fifo_handle, 0, sp->desc1, - sp->s2io_entries[i].arg); - DBG_PRINT(ERR_DBG, "%s @ 0x%llx\n", sp->desc1, - (unsigned long long)sp->msix_info[i].addr); - } else { - sprintf(sp->desc2, "%s:MSI-X-%d-RX", - dev->name, i); - err = request_irq(sp->entries[i].vector, - s2io_msix_ring_handle, 0, sp->desc2, - sp->s2io_entries[i].arg); - DBG_PRINT(ERR_DBG, "%s @ 0x%llx\n", sp->desc2, - (unsigned long long)sp->msix_info[i].addr); - } - if (err) { - DBG_PRINT(ERR_DBG, "%s: MSI-X-%d registration \ -failed\n", dev->name, i); - DBG_PRINT(ERR_DBG, "Returned: %d\n", err); - goto isr_registration_failed; - } - sp->s2io_entries[i].in_use = MSIX_REGISTERED_SUCCESS; - } - } - if (sp->intr_type == INTA) { - err = request_irq((int) sp->pdev->irq, s2io_isr, IRQF_SHARED, - sp->name, dev); - if (err) { - DBG_PRINT(ERR_DBG, "%s: ISR registration failed\n", - dev->name); - goto isr_registration_failed; - } + goto hw_init_failed; } if (s2io_set_mac_addr(dev, dev->dev_addr) == FAILURE) { DBG_PRINT(ERR_DBG, "Set Mac Address Failed\n"); + s2io_card_down(sp); err = -ENODEV; - goto setting_mac_address_failed; + goto hw_init_failed; } netif_start_queue(dev); return 0; -setting_mac_address_failed: - if (sp->intr_type != MSI_X) - free_irq(sp->pdev->irq, dev); -isr_registration_failed: - del_timer_sync(&sp->alarm_timer); - if (sp->intr_type == MSI_X) { - int i; - u16 msi_control; /* Temp variable */ - - for (i=1; (sp->s2io_entries[i].in_use == - MSIX_REGISTERED_SUCCESS); i++) { - int vector = sp->entries[i].vector; - void *arg = sp->s2io_entries[i].arg; - - free_irq(vector, arg); - } - pci_disable_msix(sp->pdev); - - /* Temp */ - pci_read_config_word(sp->pdev, 0x42, &msi_control); - msi_control &= 0xFFFE; /* Disable MSI */ - pci_write_config_word(sp->pdev, 0x42, msi_control); - } - else if (sp->intr_type == MSI) - pci_disable_msi(sp->pdev); -hw_enable_failed: - s2io_reset(sp); hw_init_failed: if (sp->intr_type == MSI_X) { if (sp->entries) @@ -3874,7 +3781,7 @@ static int s2io_close(struct net_device *dev) flush_scheduled_work(); netif_stop_queue(dev); /* Reset card, kill tasklet and free Tx and Rx buffers. */ - s2io_card_down(sp, 1); + s2io_card_down(sp); sp->device_close_flag = TRUE; /* Device is shut down. */ return 0; @@ -5919,7 +5826,7 @@ static int s2io_change_mtu(struct net_device *dev, int new_mtu) dev->mtu = new_mtu; if (netif_running(dev)) { - s2io_card_down(sp, 0); + s2io_card_down(sp); netif_stop_queue(dev); if (s2io_card_up(sp)) { DBG_PRINT(ERR_DBG, "%s: Device bring up failed\n", @@ -6216,43 +6123,106 @@ static int rxd_owner_bit_reset(nic_t *sp) } -static void s2io_card_down(nic_t * sp, int flag) +static int s2io_add_isr(nic_t * sp) { - int cnt = 0; - XENA_dev_config_t __iomem *bar0 = sp->bar0; - unsigned long flags; - register u64 val64 = 0; + int ret = 0; struct net_device *dev = sp->dev; + int err = 0; - del_timer_sync(&sp->alarm_timer); - /* If s2io_set_link task is executing, wait till it completes. */ - while (test_and_set_bit(0, &(sp->link_state))) { - msleep(50); + if (sp->intr_type == MSI) + ret = s2io_enable_msi(sp); + else if (sp->intr_type == MSI_X) + ret = s2io_enable_msi_x(sp); + if (ret) { + DBG_PRINT(ERR_DBG, "%s: Defaulting to INTA\n", dev->name); + sp->intr_type = INTA; } - atomic_set(&sp->card_state, CARD_DOWN); - /* disable Tx and Rx traffic on the NIC */ - stop_nic(sp); - if (flag) { - if (sp->intr_type == MSI_X) { - int i; - u16 msi_control; + /* Store the values of the MSIX table in the nic_t structure */ + store_xmsi_data(sp); - for (i=1; (sp->s2io_entries[i].in_use == - MSIX_REGISTERED_SUCCESS); i++) { - int vector = sp->entries[i].vector; - void *arg = sp->s2io_entries[i].arg; + /* After proper initialization of H/W, register ISR */ + if (sp->intr_type == MSI) { + err = request_irq((int) sp->pdev->irq, s2io_msi_handle, + IRQF_SHARED, sp->name, dev); + if (err) { + pci_disable_msi(sp->pdev); + DBG_PRINT(ERR_DBG, "%s: MSI registration failed\n", + dev->name); + return -1; + } + } + if (sp->intr_type == MSI_X) { + int i; - free_irq(vector, arg); + for (i=1; (sp->s2io_entries[i].in_use == MSIX_FLG); i++) { + if (sp->s2io_entries[i].type == MSIX_FIFO_TYPE) { + sprintf(sp->desc[i], "%s:MSI-X-%d-TX", + dev->name, i); + err = request_irq(sp->entries[i].vector, + s2io_msix_fifo_handle, 0, sp->desc[i], + sp->s2io_entries[i].arg); + DBG_PRINT(ERR_DBG, "%s @ 0x%llx\n", sp->desc[i], + (unsigned long long)sp->msix_info[i].addr); + } else { + sprintf(sp->desc[i], "%s:MSI-X-%d-RX", + dev->name, i); + err = request_irq(sp->entries[i].vector, + s2io_msix_ring_handle, 0, sp->desc[i], + sp->s2io_entries[i].arg); + DBG_PRINT(ERR_DBG, "%s @ 0x%llx\n", sp->desc[i], + (unsigned long long)sp->msix_info[i].addr); } - pci_read_config_word(sp->pdev, 0x42, &msi_control); - msi_control &= 0xFFFE; /* Disable MSI */ - pci_write_config_word(sp->pdev, 0x42, msi_control); - pci_disable_msix(sp->pdev); - } else { - free_irq(sp->pdev->irq, dev); - if (sp->intr_type == MSI) - pci_disable_msi(sp->pdev); + if (err) { + DBG_PRINT(ERR_DBG,"%s:MSI-X-%d registration " + "failed\n", dev->name, i); + DBG_PRINT(ERR_DBG, "Returned: %d\n", err); + return -1; + } + sp->s2io_entries[i].in_use = MSIX_REGISTERED_SUCCESS; + } + } + if (sp->intr_type == INTA) { + err = request_irq((int) sp->pdev->irq, s2io_isr, IRQF_SHARED, + sp->name, dev); + if (err) { + DBG_PRINT(ERR_DBG, "%s: ISR registration failed\n", + dev->name); + return -1; + } + } + return 0; +} +static void s2io_rem_isr(nic_t * sp) +{ + int cnt = 0; + struct net_device *dev = sp->dev; + + if (sp->intr_type == MSI_X) { + int i; + u16 msi_control; + + for (i=1; (sp->s2io_entries[i].in_use == + MSIX_REGISTERED_SUCCESS); i++) { + int vector = sp->entries[i].vector; + void *arg = sp->s2io_entries[i].arg; + + free_irq(vector, arg); + } + pci_read_config_word(sp->pdev, 0x42, &msi_control); + msi_control &= 0xFFFE; /* Disable MSI */ + pci_write_config_word(sp->pdev, 0x42, msi_control); + + pci_disable_msix(sp->pdev); + } else { + free_irq(sp->pdev->irq, dev); + if (sp->intr_type == MSI) { + u16 val; + + pci_disable_msi(sp->pdev); + pci_read_config_word(sp->pdev, 0x4c, &val); + val ^= 0x1; + pci_write_config_word(sp->pdev, 0x4c, val); } } /* Waiting till all Interrupt handlers are complete */ @@ -6263,6 +6233,26 @@ static void s2io_card_down(nic_t * sp, int flag) break; cnt++; } while(cnt < 5); +} + +static void s2io_card_down(nic_t * sp) +{ + int cnt = 0; + XENA_dev_config_t __iomem *bar0 = sp->bar0; + unsigned long flags; + register u64 val64 = 0; + + del_timer_sync(&sp->alarm_timer); + /* If s2io_set_link task is executing, wait till it completes. */ + while (test_and_set_bit(0, &(sp->link_state))) { + msleep(50); + } + atomic_set(&sp->card_state, CARD_DOWN); + + /* disable Tx and Rx traffic on the NIC */ + stop_nic(sp); + + s2io_rem_isr(sp); /* Kill tasklet. */ tasklet_kill(&sp->task); @@ -6314,23 +6304,16 @@ static int s2io_card_up(nic_t * sp) mac_info_t *mac_control; struct config_param *config; struct net_device *dev = (struct net_device *) sp->dev; + u16 interruptible; /* Initialize the H/W I/O registers */ if (init_nic(sp) != 0) { DBG_PRINT(ERR_DBG, "%s: H/W initialization failed\n", dev->name); + s2io_reset(sp); return -ENODEV; } - if (sp->intr_type == MSI) - ret = s2io_enable_msi(sp); - else if (sp->intr_type == MSI_X) - ret = s2io_enable_msi_x(sp); - if (ret) { - DBG_PRINT(ERR_DBG, "%s: Defaulting to INTA\n", dev->name); - sp->intr_type = INTA; - } - /* * Initializing the Rx buffers. For now we are considering only 1 * Rx ring and initializing buffers into 30 Rx blocks @@ -6361,21 +6344,39 @@ static int s2io_card_up(nic_t * sp) sp->lro_max_aggr_per_sess = lro_max_pkts; } - /* Enable tasklet for the device */ - tasklet_init(&sp->task, s2io_tasklet, (unsigned long) dev); - /* Enable Rx Traffic and interrupts on the NIC */ if (start_nic(sp)) { DBG_PRINT(ERR_DBG, "%s: Starting NIC failed\n", dev->name); - tasklet_kill(&sp->task); s2io_reset(sp); - free_irq(dev->irq, dev); + free_rx_buffers(sp); + return -ENODEV; + } + + /* Add interrupt service routine */ + if (s2io_add_isr(sp) != 0) { + if (sp->intr_type == MSI_X) + s2io_rem_isr(sp); + s2io_reset(sp); free_rx_buffers(sp); return -ENODEV; } S2IO_TIMER_CONF(sp->alarm_timer, s2io_alarm_handle, sp, (HZ/2)); + /* Enable tasklet for the device */ + tasklet_init(&sp->task, s2io_tasklet, (unsigned long) dev); + + /* Enable select interrupts */ + if (sp->intr_type != INTA) + en_dis_able_nic_intrs(sp, ENA_ALL_INTRS, DISABLE_INTRS); + else { + interruptible = TX_TRAFFIC_INTR | RX_TRAFFIC_INTR; + interruptible |= TX_PIC_INTR | RX_PIC_INTR; + interruptible |= TX_MAC_INTR | RX_MAC_INTR; + en_dis_able_nic_intrs(sp, interruptible, ENABLE_INTRS); + } + + atomic_set(&sp->card_state, CARD_UP); return 0; } @@ -6395,7 +6396,7 @@ static void s2io_restart_nic(unsigned long data) struct net_device *dev = (struct net_device *) data; nic_t *sp = dev->priv; - s2io_card_down(sp, 0); + s2io_card_down(sp); if (s2io_card_up(sp)) { DBG_PRINT(ERR_DBG, "%s: Device bring up failed\n", dev->name); diff --git a/drivers/net/s2io.h b/drivers/net/s2io.h index c43f5217970..217097bc22f 100644 --- a/drivers/net/s2io.h +++ b/drivers/net/s2io.h @@ -829,8 +829,7 @@ struct s2io_nic { #define MSIX_FLG 0xA5 struct msix_entry *entries; struct s2io_msix_entry *s2io_entries; - char desc1[35]; - char desc2[35]; + char desc[MAX_REQUESTED_MSI_X][25]; int avail_msix_vectors; /* No. of MSI-X vectors granted by system */ @@ -1002,7 +1001,7 @@ static int verify_xena_quiescence(nic_t *sp, u64 val64, int flag); static struct ethtool_ops netdev_ethtool_ops; static void s2io_set_link(unsigned long data); static int s2io_set_swapper(nic_t * sp); -static void s2io_card_down(nic_t *nic, int flag); +static void s2io_card_down(nic_t *nic); static int s2io_card_up(nic_t *nic); static int get_xena_rev_id(struct pci_dev *pdev); static void restore_xmsi_data(nic_t *nic); -- cgit v1.2.3-70-g09d2 From 4626dd46f5e70dfb70f4b57cf527c8de9f80e4fa Mon Sep 17 00:00:00 2001 From: Andrew Morton Date: Thu, 6 Jul 2006 23:58:26 -0700 Subject: [PATCH] 8139cp.c printk fix drivers/net/8139cp.c: In function 'cp_init_one': drivers/net/8139cp.c:1919: warning: format '%lx' expects type 'long unsigned int', but argument 4 has type 'resource_size_t' drivers/net/8139cp.c:1919: warning: format '%lx' expects type 'long unsigned int', but argument 5 has type 'resource_size_t' Signed-off-by: Andrew Morton Signed-off-by: Jeff Garzik --- drivers/net/8139cp.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/net') diff --git a/drivers/net/8139cp.c b/drivers/net/8139cp.c index d2150baa7e3..1428bb7715a 100644 --- a/drivers/net/8139cp.c +++ b/drivers/net/8139cp.c @@ -1916,7 +1916,7 @@ static int cp_init_one (struct pci_dev *pdev, const struct pci_device_id *ent) regs = ioremap(pciaddr, CP_REGS_SIZE); if (!regs) { rc = -EIO; - dev_err(&pdev->dev, "Cannot map PCI MMIO (%lx@%lx)\n", + dev_err(&pdev->dev, "Cannot map PCI MMIO (%Lx@%Lx)\n", (unsigned long long)pci_resource_len(pdev, 1), (unsigned long long)pciaddr); goto err_out_res; -- cgit v1.2.3-70-g09d2 From c5d965caa1dbb54077673cf22e3f8a58e1cc866c Mon Sep 17 00:00:00 2001 From: Dmitry Torokhov Date: Thu, 6 Jul 2006 23:58:27 -0700 Subject: [PATCH] smsc-ircc2: fix section reference mismatches subsystem_configurations array is only used by an __init function, therefore it should be marked __initdata, not __devinitdata. Signed-off-by: Dmitry Torokhov Signed-off-by: Andrew Morton Signed-off-by: Jeff Garzik --- drivers/net/irda/smsc-ircc2.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/net') diff --git a/drivers/net/irda/smsc-ircc2.c b/drivers/net/irda/smsc-ircc2.c index a4674044bd6..2eff45bedc7 100644 --- a/drivers/net/irda/smsc-ircc2.c +++ b/drivers/net/irda/smsc-ircc2.c @@ -2353,7 +2353,7 @@ static int __init smsc_superio_lpc(unsigned short cfg_base) #ifdef CONFIG_PCI #define PCIID_VENDOR_INTEL 0x8086 #define PCIID_VENDOR_ALI 0x10b9 -static struct smsc_ircc_subsystem_configuration subsystem_configurations[] __devinitdata = { +static struct smsc_ircc_subsystem_configuration subsystem_configurations[] __initdata = { { .vendor = PCIID_VENDOR_INTEL, /* Intel 82801DBM LPC bridge */ .device = 0x24cc, -- cgit v1.2.3-70-g09d2 From 709cf0187d286cb1bf2c210e62bba98afdec859c Mon Sep 17 00:00:00 2001 From: Auke Kok Date: Mon, 10 Jul 2006 08:51:43 -0700 Subject: [PATCH] ixgb: fix tx unit hang - properly calculate desciptor count There were some tso bugs that only showed up with heavy load and 16kB pages that this patch fixes by making the driver's internal use count of descriptors match the count that it was estimating it needed using the DESC_NEEDED macro. This bug caused NETDEV_WATCHDOG resets aka tx timeouts. Signed-off-by: Jesse Brandeburg Signed-off-by: Auke Kok Signed-off-by: Jeff Garzik --- drivers/net/ixgb/ixgb_main.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/ixgb/ixgb_main.c b/drivers/net/ixgb/ixgb_main.c index 7eb08d92913..7bbd447289b 100644 --- a/drivers/net/ixgb/ixgb_main.c +++ b/drivers/net/ixgb/ixgb_main.c @@ -1281,7 +1281,7 @@ ixgb_tx_map(struct ixgb_adapter *adapter, struct sk_buff *skb, while(len) { buffer_info = &tx_ring->buffer_info[i]; - size = min(len, IXGB_MAX_JUMBO_FRAME_SIZE); + size = min(len, IXGB_MAX_DATA_PER_TXD); buffer_info->length = size; buffer_info->dma = pci_map_single(adapter->pdev, @@ -1306,7 +1306,7 @@ ixgb_tx_map(struct ixgb_adapter *adapter, struct sk_buff *skb, while(len) { buffer_info = &tx_ring->buffer_info[i]; - size = min(len, IXGB_MAX_JUMBO_FRAME_SIZE); + size = min(len, IXGB_MAX_DATA_PER_TXD); buffer_info->length = size; buffer_info->dma = pci_map_page(adapter->pdev, -- cgit v1.2.3-70-g09d2 From 8431adfd37c306c05abeac8879be7b4e03273a4f Mon Sep 17 00:00:00 2001 From: Deepak Saxena Date: Tue, 11 Jul 2006 23:02:48 -0700 Subject: [PATCH] Update smc91x driver with ARM Versatile board info We need to specify a Versatile-specific SMC_IRQ_FLAGS value or the new generic IRQ layer will complain thusly: No IRQF_TRIGGER set_type function for IRQ 25 () Signed-off-by: Deepak Saxena Signed-off-by: Jeff Garzik --- drivers/net/smc91x.h | 18 ++++++++++++++++++ 1 file changed, 18 insertions(+) (limited to 'drivers/net') diff --git a/drivers/net/smc91x.h b/drivers/net/smc91x.h index b4028049ed7..4ec4b4d23ae 100644 --- a/drivers/net/smc91x.h +++ b/drivers/net/smc91x.h @@ -354,6 +354,24 @@ static inline void LPD7_SMC_outsw (unsigned char* a, int r, #define SMC_IRQ_FLAGS (0) +#elif defined(CONFIG_ARCH_VERSATILE) + +#define SMC_CAN_USE_8BIT 1 +#define SMC_CAN_USE_16BIT 1 +#define SMC_CAN_USE_32BIT 1 +#define SMC_NOWAIT 1 + +#define SMC_inb(a, r) readb((a) + (r)) +#define SMC_inw(a, r) readw((a) + (r)) +#define SMC_inl(a, r) readl((a) + (r)) +#define SMC_outb(v, a, r) writeb(v, (a) + (r)) +#define SMC_outw(v, a, r) writew(v, (a) + (r)) +#define SMC_outl(v, a, r) writel(v, (a) + (r)) +#define SMC_insl(a, r, p, l) readsl((a) + (r), p, l) +#define SMC_outsl(a, r, p, l) writesl((a) + (r), p, l) + +#define SMC_IRQ_FLAGS (0) + #else #define SMC_CAN_USE_8BIT 1 -- cgit v1.2.3-70-g09d2 From 4c2248cc57f83ce551511a6c1736383938dd9d1b Mon Sep 17 00:00:00 2001 From: Brice Goglin Date: Sun, 9 Jul 2006 21:10:18 -0400 Subject: [PATCH] myri10ge return value fix Andrew Morton wrote: > All these functions return error codes, and we're not checking them. We > should. So there's a patch which marks all these things as __must_check, > which causes around 1,500 new warnings. > The following patch fixes such a warning in myri10ge. Check pci_enable_device() return value in myri10ge_resume(). Signed-off-by: Brice Goglin Signed-off-by: Jeff Garzik --- drivers/net/myri10ge/myri10ge.c | 13 ++++++++++--- 1 file changed, 10 insertions(+), 3 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/myri10ge/myri10ge.c b/drivers/net/myri10ge/myri10ge.c index ee1de971a71..07ca9480a6f 100644 --- a/drivers/net/myri10ge/myri10ge.c +++ b/drivers/net/myri10ge/myri10ge.c @@ -2412,14 +2412,20 @@ static int myri10ge_resume(struct pci_dev *pdev) return -EIO; } myri10ge_restore_state(mgp); - pci_enable_device(pdev); + + status = pci_enable_device(pdev); + if (status < 0) { + dev_err(&pdev->dev, "failed to enable device\n"); + return -EIO; + } + pci_set_master(pdev); status = request_irq(pdev->irq, myri10ge_intr, IRQF_SHARED, netdev->name, mgp); if (status != 0) { dev_err(&pdev->dev, "failed to allocate IRQ\n"); - goto abort_with_msi; + goto abort_with_enabled; } myri10ge_reset(mgp); @@ -2438,7 +2444,8 @@ static int myri10ge_resume(struct pci_dev *pdev) return 0; -abort_with_msi: +abort_with_enabled: + pci_disable_device(pdev); return -EIO; } -- cgit v1.2.3-70-g09d2 From fbb88b3e0b59fbc877c884f5fc978428b2fe7aea Mon Sep 17 00:00:00 2001 From: Stephen Hemminger Date: Wed, 12 Jul 2006 15:23:42 -0700 Subject: [PATCH] sky2: fix truncated collision threshold mask Patch to correct broken collision threshold mask in sky2 driver. Should be three bits wide, but the mask only allows for 1 bit to be set. Thanks & Regards Neil Signed-off-by: Neil Horman Signed-off-by: Stephen Hemminger sky2.h | 2 +- 1 files changed, 1 insertion(+), 1 deletion(-) Signed-off-by: Jeff Garzik --- drivers/net/sky2.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/net') diff --git a/drivers/net/sky2.h b/drivers/net/sky2.h index 8a0bc5525f0..2db8d19b22d 100644 --- a/drivers/net/sky2.h +++ b/drivers/net/sky2.h @@ -1480,7 +1480,7 @@ enum { GM_TXCR_FORCE_JAM = 1<<15, /* Bit 15: Force Jam / Flow-Control */ GM_TXCR_CRC_DIS = 1<<14, /* Bit 14: Disable insertion of CRC */ GM_TXCR_PAD_DIS = 1<<13, /* Bit 13: Disable padding of packets */ - GM_TXCR_COL_THR_MSK = 1<<10, /* Bit 12..10: Collision Threshold */ + GM_TXCR_COL_THR_MSK = 7<<10, /* Bit 12..10: Collision Threshold */ }; #define TX_COL_THR(x) (((x)<<10) & GM_TXCR_COL_THR_MSK) -- cgit v1.2.3-70-g09d2 From 83405f058eb78b515ccf5b9066fe0a51d55114a0 Mon Sep 17 00:00:00 2001 From: Stephen Hemminger Date: Wed, 12 Jul 2006 15:23:43 -0700 Subject: [PATCH] skge: fix truncated collision threshold mask Patch to correct broken collision threshold mask in (same problem as sky2 driver). Should be three bits wide, but the mask only allows for 1 bit to be set. Signed-off-by: Stephen Hemminger Signed-off-by: Jeff Garzik --- drivers/net/skge.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/skge.h b/drivers/net/skge.h index ed19ff47ce1..593387b3c0d 100644 --- a/drivers/net/skge.h +++ b/drivers/net/skge.h @@ -1734,11 +1734,11 @@ enum { GM_TXCR_FORCE_JAM = 1<<15, /* Bit 15: Force Jam / Flow-Control */ GM_TXCR_CRC_DIS = 1<<14, /* Bit 14: Disable insertion of CRC */ GM_TXCR_PAD_DIS = 1<<13, /* Bit 13: Disable padding of packets */ - GM_TXCR_COL_THR_MSK = 1<<10, /* Bit 12..10: Collision Threshold */ + GM_TXCR_COL_THR_MSK = 7<<10, /* Bit 12..10: Collision Threshold */ }; #define TX_COL_THR(x) (((x)<<10) & GM_TXCR_COL_THR_MSK) -#define TX_COL_DEF 0x04 +#define TX_COL_DEF 0x04 /* late collision after 64 byte */ /* GM_RX_CTRL 16 bit r/w Receive Control Register */ enum { -- cgit v1.2.3-70-g09d2 From f326fe768b39fe4131b1e2ca266c9c385ca307f4 Mon Sep 17 00:00:00 2001 From: Stephen Hemminger Date: Wed, 12 Jul 2006 15:23:44 -0700 Subject: [PATCH] sk98lin: fix truncated collision threshold mask Patch to correct broken collision threshold mask in (same problem as sky2 driver). Should be three bits wide, but the mask only allows for 1 bit to be set. Signed-off-by: Stephen Hemminger Signed-off-by: Jeff Garzik --- drivers/net/sk98lin/h/xmac_ii.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/net') diff --git a/drivers/net/sk98lin/h/xmac_ii.h b/drivers/net/sk98lin/h/xmac_ii.h index 2b19f8ad031..7f8e6d0084c 100644 --- a/drivers/net/sk98lin/h/xmac_ii.h +++ b/drivers/net/sk98lin/h/xmac_ii.h @@ -1473,7 +1473,7 @@ extern "C" { #define GM_TXCR_FORCE_JAM (1<<15) /* Bit 15: Force Jam / Flow-Control */ #define GM_TXCR_CRC_DIS (1<<14) /* Bit 14: Disable insertion of CRC */ #define GM_TXCR_PAD_DIS (1<<13) /* Bit 13: Disable padding of packets */ -#define GM_TXCR_COL_THR_MSK (1<<10) /* Bit 12..10: Collision Threshold */ +#define GM_TXCR_COL_THR_MSK (7<<10) /* Bit 12..10: Collision Threshold */ #define TX_COL_THR(x) (SHIFT10(x) & GM_TXCR_COL_THR_MSK) -- cgit v1.2.3-70-g09d2 From 59139528c8e7880eee437e81647ade1b36af0d41 Mon Sep 17 00:00:00 2001 From: Stephen Hemminger Date: Wed, 12 Jul 2006 15:23:45 -0700 Subject: [PATCH] sky2: sky2_reset section mismatch Since sky2_reset gets call from sky2_resume it shouldn't be tagged with devinit. Signed-off-by: Stephen Hemminger Signed-off-by: Jeff Garzik --- drivers/net/sky2.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/net') diff --git a/drivers/net/sky2.c b/drivers/net/sky2.c index 31093760aa1..4af3b86f62b 100644 --- a/drivers/net/sky2.c +++ b/drivers/net/sky2.c @@ -2286,7 +2286,7 @@ static inline u32 sky2_clk2us(const struct sky2_hw *hw, u32 clk) } -static int __devinit sky2_reset(struct sky2_hw *hw) +static int sky2_reset(struct sky2_hw *hw) { u16 status; u8 t8, pmd_type; -- cgit v1.2.3-70-g09d2 From 6a5706b99c98e3c974cf5b55324e4eed7f82e55a Mon Sep 17 00:00:00 2001 From: Stephen Hemminger Date: Wed, 12 Jul 2006 15:23:46 -0700 Subject: [PATCH] sky2: NAPI suspend/resume of dual port cards The changes to handle suspend/resume didn't handle the case where a dual port card has the first port down, but the second is running. In this driver, all NAPI polling is done on the primary port. Signed-off-by: Stephen Hemminger Signed-off-by: Jeff Garzik --- drivers/net/sky2.c | 11 ++++------- 1 file changed, 4 insertions(+), 7 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/sky2.c b/drivers/net/sky2.c index 4af3b86f62b..5e8f9efd90a 100644 --- a/drivers/net/sky2.c +++ b/drivers/net/sky2.c @@ -3437,17 +3437,14 @@ static int sky2_suspend(struct pci_dev *pdev, pm_message_t state) return -EINVAL; del_timer_sync(&hw->idle_timer); + netif_poll_disable(hw->dev[0]); for (i = 0; i < hw->ports; i++) { struct net_device *dev = hw->dev[i]; - if (dev) { - if (!netif_running(dev)) - continue; - + if (netif_running(dev)) { sky2_down(dev); netif_device_detach(dev); - netif_poll_disable(dev); } } @@ -3474,9 +3471,8 @@ static int sky2_resume(struct pci_dev *pdev) for (i = 0; i < hw->ports; i++) { struct net_device *dev = hw->dev[i]; - if (dev && netif_running(dev)) { + if (netif_running(dev)) { netif_device_attach(dev); - netif_poll_enable(dev); err = sky2_up(dev); if (err) { @@ -3488,6 +3484,7 @@ static int sky2_resume(struct pci_dev *pdev) } } + netif_poll_enable(hw->dev[0]); sky2_idle_start(hw); out: return err; -- cgit v1.2.3-70-g09d2 From afa195da458cb06f302c37f8d37b21b177060aed Mon Sep 17 00:00:00 2001 From: Stephen Hemminger Date: Wed, 12 Jul 2006 15:23:47 -0700 Subject: [PATCH] sky2: PHY power on delays The documentation says we need to wait after turning on the PHY. Also, don't enable WOL by default. Signed-off-by: Stephen Hemminger Signed-off-by: Jeff Garzik --- drivers/net/sky2.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'drivers/net') diff --git a/drivers/net/sky2.c b/drivers/net/sky2.c index 5e8f9efd90a..e65689ebe14 100644 --- a/drivers/net/sky2.c +++ b/drivers/net/sky2.c @@ -234,7 +234,6 @@ static void sky2_set_power_state(struct sky2_hw *hw, pci_power_t state) } if (hw->chip_id == CHIP_ID_YUKON_EC_U) { - sky2_write16(hw, B0_CTST, Y2_HW_WOL_ON); sky2_pci_write32(hw, PCI_DEV_REG3, 0); reg1 = sky2_pci_read32(hw, PCI_DEV_REG4); reg1 &= P_ASPM_CONTROL_MSK; @@ -243,6 +242,7 @@ static void sky2_set_power_state(struct sky2_hw *hw, pci_power_t state) } sky2_pci_write32(hw, PCI_DEV_REG1, reg1); + udelay(100); break; @@ -255,6 +255,7 @@ static void sky2_set_power_state(struct sky2_hw *hw, pci_power_t state) else reg1 |= (PCI_Y2_PHY1_POWD | PCI_Y2_PHY2_POWD); sky2_pci_write32(hw, PCI_DEV_REG1, reg1); + udelay(100); if (hw->chip_id == CHIP_ID_YUKON_XL && hw->chip_rev > 1) sky2_write8(hw, B2_Y2_CLK_GATE, 0); -- cgit v1.2.3-70-g09d2 From 22e1170310ec6afa41e0dc7ac9dfac735d82dcab Mon Sep 17 00:00:00 2001 From: Stephen Hemminger Date: Wed, 12 Jul 2006 15:23:48 -0700 Subject: [PATCH] sky2: optimize receive restart When the driver handles multiple packets per NAPI poll, it is better to reload the receive ring, then tell the hardware. Otherwise, under packet storm with flow control, the driver/hardware will degrade down to one packet getting through per pause-exchange. Likewise on transmit, don't wakeup until a little more than minimum ring space is available. Signed-off-by: Stephen Hemminger Signed-off-by: Jeff Garzik --- drivers/net/sky2.c | 27 ++++++++++++++++++++++----- 1 file changed, 22 insertions(+), 5 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/sky2.c b/drivers/net/sky2.c index e65689ebe14..d98f28c34e5 100644 --- a/drivers/net/sky2.c +++ b/drivers/net/sky2.c @@ -65,6 +65,7 @@ #define RX_MAX_PENDING (RX_LE_SIZE/2 - 2) #define RX_DEF_PENDING RX_MAX_PENDING #define RX_SKB_ALIGN 8 +#define RX_BUF_WRITE 16 #define TX_RING_SIZE 512 #define TX_DEF_PENDING (TX_RING_SIZE - 1) @@ -1390,7 +1391,7 @@ static void sky2_tx_complete(struct sky2_port *sky2, u16 done) } sky2->tx_cons = put; - if (tx_avail(sky2) > MAX_SKB_TX_LE) + if (tx_avail(sky2) > MAX_SKB_TX_LE + 4) netif_wake_queue(dev); } @@ -1889,9 +1890,6 @@ resubmit: re->skb->ip_summed = CHECKSUM_NONE; sky2_rx_add(sky2, re->mapaddr); - /* Tell receiver about new buffers. */ - sky2_put_idx(sky2->hw, rxqaddr[sky2->port], sky2->rx_put); - return skb; oversize: @@ -1938,7 +1936,9 @@ static inline int sky2_more_work(const struct sky2_hw *hw) /* Process status response ring */ static int sky2_status_intr(struct sky2_hw *hw, int to_do) { + struct sky2_port *sky2; int work_done = 0; + unsigned buf_write[2] = { 0, 0 }; u16 hwidx = sky2_read16(hw, STAT_PUT_IDX); rmb(); @@ -1946,7 +1946,6 @@ static int sky2_status_intr(struct sky2_hw *hw, int to_do) while (hw->st_idx != hwidx) { struct sky2_status_le *le = hw->st_le + hw->st_idx; struct net_device *dev; - struct sky2_port *sky2; struct sk_buff *skb; u32 status; u16 length; @@ -1979,6 +1978,14 @@ static int sky2_status_intr(struct sky2_hw *hw, int to_do) #endif netif_receive_skb(skb); + /* Update receiver after 16 frames */ + if (++buf_write[le->link] == RX_BUF_WRITE) { + sky2_put_idx(hw, rxqaddr[le->link], + sky2->rx_put); + buf_write[le->link] = 0; + } + + /* Stop after net poll weight */ if (++work_done >= to_do) goto exit_loop; break; @@ -2017,6 +2024,16 @@ static int sky2_status_intr(struct sky2_hw *hw, int to_do) } exit_loop: + if (buf_write[0]) { + sky2 = netdev_priv(hw->dev[0]); + sky2_put_idx(hw, Q_R1, sky2->rx_put); + } + + if (buf_write[1]) { + sky2 = netdev_priv(hw->dev[1]); + sky2_put_idx(hw, Q_R2, sky2->rx_put); + } + return work_done; } -- cgit v1.2.3-70-g09d2 From d3d9e484b2ca502c87156b69fa6b8f8fd5fa18a0 Mon Sep 17 00:00:00 2001 From: Auke Kok Date: Fri, 14 Jul 2006 16:14:23 -0700 Subject: e1000: Redo netpoll fix to address community concerns The original suggested fix for netpoll was found to be racy on SMP kernels. While it is highly unlikely that this race would ever be seen in the real world due to current netpoll usage models, we implemented this updated fix to address concerns. Signed-off-by: Mitch Williams Signed-off-by: Auke Kok --- drivers/net/e1000/e1000_main.c | 37 +++++++++++++++---------------------- 1 file changed, 15 insertions(+), 22 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/e1000/e1000_main.c b/drivers/net/e1000/e1000_main.c index 6d3d4193450..1c6bcad5b91 100644 --- a/drivers/net/e1000/e1000_main.c +++ b/drivers/net/e1000/e1000_main.c @@ -3387,8 +3387,8 @@ e1000_intr(int irq, void *data, struct pt_regs *regs) E1000_WRITE_REG(hw, IMC, ~0); E1000_WRITE_FLUSH(hw); } - if (likely(netif_rx_schedule_prep(&adapter->polling_netdev[0]))) - __netif_rx_schedule(&adapter->polling_netdev[0]); + if (likely(netif_rx_schedule_prep(netdev))) + __netif_rx_schedule(netdev); else e1000_irq_enable(adapter); #else @@ -3431,34 +3431,26 @@ e1000_clean(struct net_device *poll_dev, int *budget) { struct e1000_adapter *adapter; int work_to_do = min(*budget, poll_dev->quota); - int tx_cleaned = 0, i = 0, work_done = 0; + int tx_cleaned = 0, work_done = 0; /* Must NOT use netdev_priv macro here. */ adapter = poll_dev->priv; /* Keep link state information with original netdev */ - if (!netif_carrier_ok(adapter->netdev)) + if (!netif_carrier_ok(poll_dev)) goto quit_polling; - while (poll_dev != &adapter->polling_netdev[i]) { - i++; - BUG_ON(i == adapter->num_rx_queues); + /* e1000_clean is called per-cpu. This lock protects + * tx_ring[0] from being cleaned by multiple cpus + * simultaneously. A failure obtaining the lock means + * tx_ring[0] is currently being cleaned anyway. */ + if (spin_trylock(&adapter->tx_queue_lock)) { + tx_cleaned = e1000_clean_tx_irq(adapter, + &adapter->tx_ring[0]); + spin_unlock(&adapter->tx_queue_lock); } - if (likely(adapter->num_tx_queues == 1)) { - /* e1000_clean is called per-cpu. This lock protects - * tx_ring[0] from being cleaned by multiple cpus - * simultaneously. A failure obtaining the lock means - * tx_ring[0] is currently being cleaned anyway. */ - if (spin_trylock(&adapter->tx_queue_lock)) { - tx_cleaned = e1000_clean_tx_irq(adapter, - &adapter->tx_ring[0]); - spin_unlock(&adapter->tx_queue_lock); - } - } else - tx_cleaned = e1000_clean_tx_irq(adapter, &adapter->tx_ring[i]); - - adapter->clean_rx(adapter, &adapter->rx_ring[i], + adapter->clean_rx(adapter, &adapter->rx_ring[0], &work_done, work_to_do); *budget -= work_done; @@ -3466,7 +3458,7 @@ e1000_clean(struct net_device *poll_dev, int *budget) /* If no Tx and not enough Rx work done, exit the polling mode */ if ((!tx_cleaned && (work_done == 0)) || - !netif_running(adapter->netdev)) { + !netif_running(poll_dev)) { quit_polling: netif_rx_complete(poll_dev); e1000_irq_enable(adapter); @@ -4752,6 +4744,7 @@ static void e1000_netpoll(struct net_device *netdev) { struct e1000_adapter *adapter = netdev_priv(netdev); + disable_irq(adapter->pdev->irq); e1000_intr(adapter->pdev->irq, netdev, NULL); e1000_clean_tx_irq(adapter, adapter->tx_ring); -- cgit v1.2.3-70-g09d2 From f235a2abb27b9396d2108dd2987fb8262cb508a3 Mon Sep 17 00:00:00 2001 From: Auke Kok Date: Fri, 14 Jul 2006 16:14:34 -0700 Subject: e1000: remove CRC bytes from measured packet length After removing the hardware CRC stripping which causes problems with SOL and related issues, we need to compensate for this changed size. Signed-off-by: Jesse Brandeburg Signed-off-by: Auke Kok --- drivers/net/e1000/e1000_main.c | 10 +++++++++- 1 file changed, 9 insertions(+), 1 deletion(-) (limited to 'drivers/net') diff --git a/drivers/net/e1000/e1000_main.c b/drivers/net/e1000/e1000_main.c index 1c6bcad5b91..0074a3a506a 100644 --- a/drivers/net/e1000/e1000_main.c +++ b/drivers/net/e1000/e1000_main.c @@ -3673,6 +3673,9 @@ e1000_clean_rx_irq(struct e1000_adapter *adapter, length = le16_to_cpu(rx_desc->length); + /* adjust length to remove Ethernet CRC */ + length -= 4; + if (unlikely(!(status & E1000_RXD_STAT_EOP))) { /* All receives must fit into a single buffer */ E1000_DBG("%s: Receive packet consumed multiple" @@ -3877,8 +3880,9 @@ e1000_clean_rx_irq_ps(struct e1000_adapter *adapter, pci_dma_sync_single_for_device(pdev, ps_page_dma->ps_page_dma[0], PAGE_SIZE, PCI_DMA_FROMDEVICE); + /* remove the CRC */ + l1 -= 4; skb_put(skb, l1); - length += l1; goto copydone; } /* if */ } @@ -3897,6 +3901,10 @@ e1000_clean_rx_irq_ps(struct e1000_adapter *adapter, skb->truesize += length; } + /* strip the ethernet crc, problem is we're using pages now so + * this whole operation can get a little cpu intensive */ + pskb_trim(skb, skb->len - 4); + copydone: e1000_rx_checksum(adapter, staterr, le16_to_cpu(rx_desc->wb.lower.hi_dword.csum_ip.csum), skb); -- cgit v1.2.3-70-g09d2 From eb0f8054dd2e8b3cdf3af4771583b1dc2e1327cc Mon Sep 17 00:00:00 2001 From: Auke Kok Date: Fri, 14 Jul 2006 16:14:48 -0700 Subject: e1000: fix panic on large frame receive when mtu=default A panic was reported when receiving 1522 size packets if using the default MTU. we should set the initial rx buffer length to the value that e1000changemtu sets so that we can receive any packet that would not be dropped by LPE=0. Signed-off-by: Jesse Brandeburg Signed-off-by: Auke Kok --- drivers/net/e1000/e1000.h | 3 +++ drivers/net/e1000/e1000_main.c | 3 +-- 2 files changed, 4 insertions(+), 2 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/e1000/e1000.h b/drivers/net/e1000/e1000.h index f411bbb44f8..d304297c496 100644 --- a/drivers/net/e1000/e1000.h +++ b/drivers/net/e1000/e1000.h @@ -110,6 +110,9 @@ struct e1000_adapter; #define E1000_MIN_RXD 80 #define E1000_MAX_82544_RXD 4096 +/* this is the size past which hardware will drop packets when setting LPE=0 */ +#define MAXIMUM_ETHERNET_VLAN_SIZE 1522 + /* Supported Rx Buffer Sizes */ #define E1000_RXBUFFER_128 128 /* Used for packet split */ #define E1000_RXBUFFER_256 256 /* Used for packet split */ diff --git a/drivers/net/e1000/e1000_main.c b/drivers/net/e1000/e1000_main.c index 0074a3a506a..154acb2cde9 100644 --- a/drivers/net/e1000/e1000_main.c +++ b/drivers/net/e1000/e1000_main.c @@ -1068,7 +1068,7 @@ e1000_sw_init(struct e1000_adapter *adapter) pci_read_config_word(pdev, PCI_COMMAND, &hw->pci_cmd_word); - adapter->rx_buffer_len = MAXIMUM_ETHERNET_FRAME_SIZE; + adapter->rx_buffer_len = MAXIMUM_ETHERNET_VLAN_SIZE; adapter->rx_ps_bsize0 = E1000_RXBUFFER_128; hw->max_frame_size = netdev->mtu + ENET_HEADER_SIZE + ETHERNET_FCS_SIZE; @@ -3148,7 +3148,6 @@ e1000_change_mtu(struct net_device *netdev, int new_mtu) adapter->rx_buffer_len = E1000_RXBUFFER_16384; /* adjust allocation if LPE protects us, and we aren't using SBP */ -#define MAXIMUM_ETHERNET_VLAN_SIZE 1522 if (!adapter->hw.tbi_compatibility_on && ((max_frame == MAXIMUM_ETHERNET_FRAME_SIZE) || (max_frame == MAXIMUM_ETHERNET_VLAN_SIZE))) -- cgit v1.2.3-70-g09d2 From 36902f2e35b132442746df6034462b7cdb7d82ab Mon Sep 17 00:00:00 2001 From: Auke Kok Date: Fri, 14 Jul 2006 16:14:55 -0700 Subject: e1000: bump version to 7.1.9-k4 Bump the version to 7.1.9-k4 to indicate three extra changes. Signed-off-by: Auke Kok --- drivers/net/e1000/e1000_main.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/net') diff --git a/drivers/net/e1000/e1000_main.c b/drivers/net/e1000/e1000_main.c index 154acb2cde9..da62db89742 100644 --- a/drivers/net/e1000/e1000_main.c +++ b/drivers/net/e1000/e1000_main.c @@ -36,7 +36,7 @@ static char e1000_driver_string[] = "Intel(R) PRO/1000 Network Driver"; #else #define DRIVERNAPI "-NAPI" #endif -#define DRV_VERSION "7.1.9-k2"DRIVERNAPI +#define DRV_VERSION "7.1.9-k4"DRIVERNAPI char e1000_driver_version[] = DRV_VERSION; static char e1000_copyright[] = "Copyright (c) 1999-2006 Intel Corporation."; -- cgit v1.2.3-70-g09d2 From caa0371e8b7391919d984672c887f660a6117f67 Mon Sep 17 00:00:00 2001 From: Stephen Hemminger Date: Mon, 17 Jul 2006 09:54:34 -0400 Subject: [PATCH] sky2: NAPI poll fix When sky2 driver gets lots of received packets at once, it can get stuck. The NAPI poll routine gets called back to keep going, but since no IRQ bits are set it doesn't make progress. Increase version, since this is serious enough problem that I want to be able to tell new from old problems. Signed-off-by: Stephen Hemminger Signed-off-by: Jeff Garzik --- drivers/net/sky2.c | 7 ++----- 1 file changed, 2 insertions(+), 5 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/sky2.c b/drivers/net/sky2.c index d98f28c34e5..de91609ca11 100644 --- a/drivers/net/sky2.c +++ b/drivers/net/sky2.c @@ -50,7 +50,7 @@ #include "sky2.h" #define DRV_NAME "sky2" -#define DRV_VERSION "1.4" +#define DRV_VERSION "1.5" #define PFX DRV_NAME " " /* @@ -2204,9 +2204,6 @@ static int sky2_poll(struct net_device *dev0, int *budget) int work_done = 0; u32 status = sky2_read32(hw, B0_Y2_SP_EISR); - if (!~status) - goto out; - if (status & Y2_IS_HW_ERR) sky2_hw_intr(hw); @@ -2243,7 +2240,7 @@ static int sky2_poll(struct net_device *dev0, int *budget) if (sky2_more_work(hw)) return 1; -out: + netif_rx_complete(dev0); sky2_read32(hw, B0_Y2_SP_LISR); -- cgit v1.2.3-70-g09d2 From ee962a5cee5b534666dbfa5e3ec3c633c90c6b1a Mon Sep 17 00:00:00 2001 From: Jens Osterkamp Date: Thu, 13 Jul 2006 11:54:23 +0200 Subject: [PATCH] spidernet: bug fix for init code We want to intitialize addr instead of data register first. Signed-off-by: Jens Osterkamp Signed-off-by: Arnd Bergmann Signed-off-by: Jeff Garzik --- drivers/net/spider_net.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/net') diff --git a/drivers/net/spider_net.c b/drivers/net/spider_net.c index fb1d5a8a45c..05b474f2c8b 100644 --- a/drivers/net/spider_net.c +++ b/drivers/net/spider_net.c @@ -1938,7 +1938,7 @@ spider_net_workaround_rxramfull(struct spider_net_card *card) /* empty sequencer data */ for (sequencer = 0; sequencer < SPIDER_NET_FIRMWARE_SEQS; sequencer++) { - spider_net_write_reg(card, SPIDER_NET_GSnPRGDAT + + spider_net_write_reg(card, SPIDER_NET_GSnPRGADR + sequencer * 8, 0x0); for (i = 0; i < SPIDER_NET_FIRMWARE_SEQWORDS; i++) { spider_net_write_reg(card, SPIDER_NET_GSnPRGDAT + -- cgit v1.2.3-70-g09d2 From bdd01503c3e4e9827df015bc7e440d5498308fdd Mon Sep 17 00:00:00 2001 From: Jens Osterkamp Date: Thu, 13 Jul 2006 11:54:08 +0200 Subject: [PATCH] spidernet: rework tx queue handling With this patch TX queue descriptors are not chained per default any more. The pointer to next descriptor is set only when next descriptor is prepaired for transfer. Also the mechanism of checking wether Spider is ready has been changed: it checks not for CARDOWNED flag in status of previous descriptor but for a TXDMAENABLED flag in Spider's register. Signed-off-by: Maxim Shchetynin Signed-off-by: Arnd Bergmann Signed-off-by: Jens Osterkamp Signed-off-by: Jeff Garzik --- drivers/net/spider_net.c | 578 +++++++++++++++++++++-------------------------- drivers/net/spider_net.h | 73 ++---- 2 files changed, 274 insertions(+), 377 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/spider_net.c b/drivers/net/spider_net.c index 05b474f2c8b..647f62e9707 100644 --- a/drivers/net/spider_net.c +++ b/drivers/net/spider_net.c @@ -84,7 +84,7 @@ MODULE_DEVICE_TABLE(pci, spider_net_pci_tbl); * * returns the content of the specified SMMIO register. */ -static u32 +static inline u32 spider_net_read_reg(struct spider_net_card *card, u32 reg) { u32 value; @@ -101,7 +101,7 @@ spider_net_read_reg(struct spider_net_card *card, u32 reg) * @reg: register to write to * @value: value to write into the specified SMMIO register */ -static void +static inline void spider_net_write_reg(struct spider_net_card *card, u32 reg, u32 value) { value = cpu_to_le32(value); @@ -259,39 +259,10 @@ spider_net_get_mac_address(struct net_device *netdev) * * returns the status as in the dmac_cmd_status field of the descriptor */ -static enum spider_net_descr_status +static inline int spider_net_get_descr_status(struct spider_net_descr *descr) { - u32 cmd_status; - - cmd_status = descr->dmac_cmd_status; - cmd_status >>= SPIDER_NET_DESCR_IND_PROC_SHIFT; - /* no need to mask out any bits, as cmd_status is 32 bits wide only - * (and unsigned) */ - return cmd_status; -} - -/** - * spider_net_set_descr_status -- sets the status of a descriptor - * @descr: descriptor to change - * @status: status to set in the descriptor - * - * changes the status to the specified value. Doesn't change other bits - * in the status - */ -static void -spider_net_set_descr_status(struct spider_net_descr *descr, - enum spider_net_descr_status status) -{ - u32 cmd_status; - /* read the status */ - cmd_status = descr->dmac_cmd_status; - /* clean the upper 4 bits */ - cmd_status &= SPIDER_NET_DESCR_IND_PROC_MASKO; - /* add the status to it */ - cmd_status |= ((u32)status)<dmac_cmd_status = cmd_status; + return descr->dmac_cmd_status & SPIDER_NET_DESCR_IND_PROC_MASK; } /** @@ -328,24 +299,23 @@ spider_net_free_chain(struct spider_net_card *card, static int spider_net_init_chain(struct spider_net_card *card, struct spider_net_descr_chain *chain, - struct spider_net_descr *start_descr, int no) + struct spider_net_descr *start_descr, + int direction, int no) { int i; struct spider_net_descr *descr; dma_addr_t buf; - atomic_set(&card->rx_chain_refill,0); - descr = start_descr; memset(descr, 0, sizeof(*descr) * no); /* set up the hardware pointers in each descriptor */ for (i=0; idmac_cmd_status = SPIDER_NET_DESCR_NOT_IN_USE; buf = pci_map_single(card->pdev, descr, SPIDER_NET_DESCR_SIZE, - PCI_DMA_BIDIRECTIONAL); + direction); if (buf == DMA_ERROR_CODE) goto iommu_error; @@ -360,10 +330,11 @@ spider_net_init_chain(struct spider_net_card *card, start_descr->prev = descr-1; descr = start_descr; - for (i=0; i < no; i++, descr++) { - descr->next_descr_addr = descr->next->bus_addr; - } + if (direction == PCI_DMA_FROMDEVICE) + for (i=0; i < no; i++, descr++) + descr->next_descr_addr = descr->next->bus_addr; + spin_lock_init(&chain->lock); chain->head = start_descr; chain->tail = start_descr; @@ -375,7 +346,7 @@ iommu_error: if (descr->bus_addr) pci_unmap_single(card->pdev, descr->bus_addr, SPIDER_NET_DESCR_SIZE, - PCI_DMA_BIDIRECTIONAL); + direction); return -ENOMEM; } @@ -396,7 +367,7 @@ spider_net_free_rx_chain_contents(struct spider_net_card *card) dev_kfree_skb(descr->skb); pci_unmap_single(card->pdev, descr->buf_addr, SPIDER_NET_MAX_FRAME, - PCI_DMA_BIDIRECTIONAL); + PCI_DMA_FROMDEVICE); } descr = descr->next; } @@ -446,15 +417,16 @@ spider_net_prepare_rx_descr(struct spider_net_card *card, skb_reserve(descr->skb, SPIDER_NET_RXBUF_ALIGN - offset); /* io-mmu-map the skb */ buf = pci_map_single(card->pdev, descr->skb->data, - SPIDER_NET_MAX_FRAME, PCI_DMA_BIDIRECTIONAL); + SPIDER_NET_MAX_FRAME, PCI_DMA_FROMDEVICE); descr->buf_addr = buf; if (buf == DMA_ERROR_CODE) { dev_kfree_skb_any(descr->skb); if (netif_msg_rx_err(card) && net_ratelimit()) pr_err("Could not iommu-map rx buffer\n"); - spider_net_set_descr_status(descr, SPIDER_NET_DESCR_NOT_IN_USE); + descr->dmac_cmd_status = SPIDER_NET_DESCR_NOT_IN_USE; } else { - descr->dmac_cmd_status = SPIDER_NET_DMAC_RX_CARDOWNED; + descr->dmac_cmd_status = SPIDER_NET_DESCR_CARDOWNED | + SPIDER_NET_DMAC_NOINTR_COMPLETE; } return error; @@ -468,7 +440,7 @@ spider_net_prepare_rx_descr(struct spider_net_card *card, * chip by writing to the appropriate register. DMA is enabled in * spider_net_enable_rxdmac. */ -static void +static inline void spider_net_enable_rxchtails(struct spider_net_card *card) { /* assume chain is aligned correctly */ @@ -483,7 +455,7 @@ spider_net_enable_rxchtails(struct spider_net_card *card) * spider_net_enable_rxdmac enables the DMA controller by setting RX_DMA_EN * in the GDADMACCNTR register */ -static void +static inline void spider_net_enable_rxdmac(struct spider_net_card *card) { wmb(); @@ -500,23 +472,24 @@ spider_net_enable_rxdmac(struct spider_net_card *card) static void spider_net_refill_rx_chain(struct spider_net_card *card) { - struct spider_net_descr_chain *chain; - - chain = &card->rx_chain; + struct spider_net_descr_chain *chain = &card->rx_chain; + unsigned long flags; /* one context doing the refill (and a second context seeing that * and omitting it) is ok. If called by NAPI, we'll be called again * as spider_net_decode_one_descr is called several times. If some * interrupt calls us, the NAPI is about to clean up anyway. */ - if (atomic_inc_return(&card->rx_chain_refill) == 1) - while (spider_net_get_descr_status(chain->head) == - SPIDER_NET_DESCR_NOT_IN_USE) { - if (spider_net_prepare_rx_descr(card, chain->head)) - break; - chain->head = chain->head->next; - } + if (!spin_trylock_irqsave(&chain->lock, flags)) + return; + + while (spider_net_get_descr_status(chain->head) == + SPIDER_NET_DESCR_NOT_IN_USE) { + if (spider_net_prepare_rx_descr(card, chain->head)) + break; + chain->head = chain->head->next; + } - atomic_dec(&card->rx_chain_refill); + spin_unlock_irqrestore(&chain->lock, flags); } /** @@ -553,111 +526,6 @@ error: return result; } -/** - * spider_net_release_tx_descr - processes a used tx descriptor - * @card: card structure - * @descr: descriptor to release - * - * releases a used tx descriptor (unmapping, freeing of skb) - */ -static void -spider_net_release_tx_descr(struct spider_net_card *card, - struct spider_net_descr *descr) -{ - struct sk_buff *skb; - - /* unmap the skb */ - skb = descr->skb; - pci_unmap_single(card->pdev, descr->buf_addr, skb->len, - PCI_DMA_BIDIRECTIONAL); - - dev_kfree_skb_any(skb); - - /* set status to not used */ - spider_net_set_descr_status(descr, SPIDER_NET_DESCR_NOT_IN_USE); -} - -/** - * spider_net_release_tx_chain - processes sent tx descriptors - * @card: adapter structure - * @brutal: if set, don't care about whether descriptor seems to be in use - * - * returns 0 if the tx ring is empty, otherwise 1. - * - * spider_net_release_tx_chain releases the tx descriptors that spider has - * finished with (if non-brutal) or simply release tx descriptors (if brutal). - * If some other context is calling this function, we return 1 so that we're - * scheduled again (if we were scheduled) and will not loose initiative. - */ -static int -spider_net_release_tx_chain(struct spider_net_card *card, int brutal) -{ - struct spider_net_descr_chain *tx_chain = &card->tx_chain; - enum spider_net_descr_status status; - - if (atomic_inc_return(&card->tx_chain_release) != 1) { - atomic_dec(&card->tx_chain_release); - return 1; - } - - for (;;) { - status = spider_net_get_descr_status(tx_chain->tail); - switch (status) { - case SPIDER_NET_DESCR_CARDOWNED: - if (!brutal) - goto out; - /* fallthrough, if we release the descriptors - * brutally (then we don't care about - * SPIDER_NET_DESCR_CARDOWNED) */ - case SPIDER_NET_DESCR_RESPONSE_ERROR: - case SPIDER_NET_DESCR_PROTECTION_ERROR: - case SPIDER_NET_DESCR_FORCE_END: - if (netif_msg_tx_err(card)) - pr_err("%s: forcing end of tx descriptor " - "with status x%02x\n", - card->netdev->name, status); - card->netdev_stats.tx_dropped++; - break; - - case SPIDER_NET_DESCR_COMPLETE: - card->netdev_stats.tx_packets++; - card->netdev_stats.tx_bytes += - tx_chain->tail->skb->len; - break; - - default: /* any other value (== SPIDER_NET_DESCR_NOT_IN_USE) */ - goto out; - } - spider_net_release_tx_descr(card, tx_chain->tail); - tx_chain->tail = tx_chain->tail->next; - } -out: - atomic_dec(&card->tx_chain_release); - - netif_wake_queue(card->netdev); - - if (status == SPIDER_NET_DESCR_CARDOWNED) - return 1; - return 0; -} - -/** - * spider_net_cleanup_tx_ring - cleans up the TX ring - * @card: card structure - * - * spider_net_cleanup_tx_ring is called by the tx_timer (as we don't use - * interrupts to cleanup our TX ring) and returns sent packets to the stack - * by freeing them - */ -static void -spider_net_cleanup_tx_ring(struct spider_net_card *card) -{ - if ( (spider_net_release_tx_chain(card, 0)) && - (card->netdev->flags & IFF_UP) ) { - mod_timer(&card->tx_timer, jiffies + SPIDER_NET_TX_TIMER); - } -} - /** * spider_net_get_multicast_hash - generates hash for multicast filter table * @addr: multicast address @@ -760,97 +628,6 @@ spider_net_disable_rxdmac(struct spider_net_card *card) SPIDER_NET_DMA_RX_FEND_VALUE); } -/** - * spider_net_stop - called upon ifconfig down - * @netdev: interface device structure - * - * always returns 0 - */ -int -spider_net_stop(struct net_device *netdev) -{ - struct spider_net_card *card = netdev_priv(netdev); - - tasklet_kill(&card->rxram_full_tl); - netif_poll_disable(netdev); - netif_carrier_off(netdev); - netif_stop_queue(netdev); - del_timer_sync(&card->tx_timer); - - /* disable/mask all interrupts */ - spider_net_write_reg(card, SPIDER_NET_GHIINT0MSK, 0); - spider_net_write_reg(card, SPIDER_NET_GHIINT1MSK, 0); - spider_net_write_reg(card, SPIDER_NET_GHIINT2MSK, 0); - - /* free_irq(netdev->irq, netdev);*/ - free_irq(to_pci_dev(netdev->class_dev.dev)->irq, netdev); - - spider_net_write_reg(card, SPIDER_NET_GDTDMACCNTR, - SPIDER_NET_DMA_TX_FEND_VALUE); - - /* turn off DMA, force end */ - spider_net_disable_rxdmac(card); - - /* release chains */ - spider_net_release_tx_chain(card, 1); - - spider_net_free_chain(card, &card->tx_chain); - spider_net_free_chain(card, &card->rx_chain); - - return 0; -} - -/** - * spider_net_get_next_tx_descr - returns the next available tx descriptor - * @card: device structure to get descriptor from - * - * returns the address of the next descriptor, or NULL if not available. - */ -static struct spider_net_descr * -spider_net_get_next_tx_descr(struct spider_net_card *card) -{ - /* check, if head points to not-in-use descr */ - if ( spider_net_get_descr_status(card->tx_chain.head) == - SPIDER_NET_DESCR_NOT_IN_USE ) { - return card->tx_chain.head; - } else { - return NULL; - } -} - -/** - * spider_net_set_txdescr_cmdstat - sets the tx descriptor command field - * @descr: descriptor structure to fill out - * @skb: packet to consider - * - * fills out the command and status field of the descriptor structure, - * depending on hardware checksum settings. - */ -static void -spider_net_set_txdescr_cmdstat(struct spider_net_descr *descr, - struct sk_buff *skb) -{ - /* make sure the other fields in the descriptor are written */ - wmb(); - - if (skb->ip_summed != CHECKSUM_HW) { - descr->dmac_cmd_status = SPIDER_NET_DMAC_CMDSTAT_NOCS; - return; - } - - /* is packet ip? - * if yes: tcp? udp? */ - if (skb->protocol == htons(ETH_P_IP)) { - if (skb->nh.iph->protocol == IPPROTO_TCP) - descr->dmac_cmd_status = SPIDER_NET_DMAC_CMDSTAT_TCPCS; - else if (skb->nh.iph->protocol == IPPROTO_UDP) - descr->dmac_cmd_status = SPIDER_NET_DMAC_CMDSTAT_UDPCS; - else /* the stack should checksum non-tcp and non-udp - packets on his own: NETIF_F_IP_CSUM */ - descr->dmac_cmd_status = SPIDER_NET_DMAC_CMDSTAT_NOCS; - } -} - /** * spider_net_prepare_tx_descr - fill tx descriptor with skb data * @card: card structure @@ -864,13 +641,12 @@ spider_net_set_txdescr_cmdstat(struct spider_net_descr *descr, */ static int spider_net_prepare_tx_descr(struct spider_net_card *card, - struct spider_net_descr *descr, struct sk_buff *skb) { + struct spider_net_descr *descr = card->tx_chain.head; dma_addr_t buf; - buf = pci_map_single(card->pdev, skb->data, - skb->len, PCI_DMA_BIDIRECTIONAL); + buf = pci_map_single(card->pdev, skb->data, skb->len, PCI_DMA_TODEVICE); if (buf == DMA_ERROR_CODE) { if (netif_msg_tx_err(card) && net_ratelimit()) pr_err("could not iommu-map packet (%p, %i). " @@ -880,10 +656,101 @@ spider_net_prepare_tx_descr(struct spider_net_card *card, descr->buf_addr = buf; descr->buf_size = skb->len; + descr->next_descr_addr = 0; descr->skb = skb; descr->data_status = 0; - spider_net_set_txdescr_cmdstat(descr,skb); + descr->dmac_cmd_status = + SPIDER_NET_DESCR_CARDOWNED | SPIDER_NET_DMAC_NOCS; + if (skb->protocol == htons(ETH_P_IP)) + switch (skb->nh.iph->protocol) { + case IPPROTO_TCP: + descr->dmac_cmd_status |= SPIDER_NET_DMAC_TCP; + break; + case IPPROTO_UDP: + descr->dmac_cmd_status |= SPIDER_NET_DMAC_UDP; + break; + } + + descr->prev->next_descr_addr = descr->bus_addr; + + return 0; +} + +/** + * spider_net_release_tx_descr - processes a used tx descriptor + * @card: card structure + * @descr: descriptor to release + * + * releases a used tx descriptor (unmapping, freeing of skb) + */ +static inline void +spider_net_release_tx_descr(struct spider_net_card *card) +{ + struct spider_net_descr *descr = card->tx_chain.tail; + struct sk_buff *skb; + + card->tx_chain.tail = card->tx_chain.tail->next; + descr->dmac_cmd_status |= SPIDER_NET_DESCR_NOT_IN_USE; + + /* unmap the skb */ + skb = descr->skb; + pci_unmap_single(card->pdev, descr->buf_addr, skb->len, + PCI_DMA_TODEVICE); + dev_kfree_skb_any(skb); +} + +/** + * spider_net_release_tx_chain - processes sent tx descriptors + * @card: adapter structure + * @brutal: if set, don't care about whether descriptor seems to be in use + * + * returns 0 if the tx ring is empty, otherwise 1. + * + * spider_net_release_tx_chain releases the tx descriptors that spider has + * finished with (if non-brutal) or simply release tx descriptors (if brutal). + * If some other context is calling this function, we return 1 so that we're + * scheduled again (if we were scheduled) and will not loose initiative. + */ +static int +spider_net_release_tx_chain(struct spider_net_card *card, int brutal) +{ + struct spider_net_descr_chain *chain = &card->tx_chain; + int status; + + spider_net_read_reg(card, SPIDER_NET_GDTDMACCNTR); + + while (chain->tail != chain->head) { + status = spider_net_get_descr_status(chain->tail); + switch (status) { + case SPIDER_NET_DESCR_COMPLETE: + card->netdev_stats.tx_packets++; + card->netdev_stats.tx_bytes += chain->tail->skb->len; + break; + + case SPIDER_NET_DESCR_CARDOWNED: + if (!brutal) + return 1; + /* fallthrough, if we release the descriptors + * brutally (then we don't care about + * SPIDER_NET_DESCR_CARDOWNED) */ + + case SPIDER_NET_DESCR_RESPONSE_ERROR: + case SPIDER_NET_DESCR_PROTECTION_ERROR: + case SPIDER_NET_DESCR_FORCE_END: + if (netif_msg_tx_err(card)) + pr_err("%s: forcing end of tx descriptor " + "with status x%02x\n", + card->netdev->name, status); + card->netdev_stats.tx_errors++; + break; + + default: + card->netdev_stats.tx_dropped++; + return 1; + } + spider_net_release_tx_descr(card); + } return 0; } @@ -896,18 +763,32 @@ spider_net_prepare_tx_descr(struct spider_net_card *card, * spider_net_kick_tx_dma writes the current tx chain head as start address * of the tx descriptor chain and enables the transmission DMA engine */ -static void -spider_net_kick_tx_dma(struct spider_net_card *card, - struct spider_net_descr *descr) +static inline void +spider_net_kick_tx_dma(struct spider_net_card *card) { - /* this is the only descriptor in the output chain. - * Enable TX DMA */ + struct spider_net_descr *descr; - spider_net_write_reg(card, SPIDER_NET_GDTDCHA, - descr->bus_addr); + if (spider_net_read_reg(card, SPIDER_NET_GDTDMACCNTR) & + SPIDER_NET_TX_DMA_EN) + goto out; - spider_net_write_reg(card, SPIDER_NET_GDTDMACCNTR, - SPIDER_NET_DMA_TX_VALUE); + descr = card->tx_chain.tail; + for (;;) { + if (spider_net_get_descr_status(descr) == + SPIDER_NET_DESCR_CARDOWNED) { + spider_net_write_reg(card, SPIDER_NET_GDTDCHA, + descr->bus_addr); + spider_net_write_reg(card, SPIDER_NET_GDTDMACCNTR, + SPIDER_NET_DMA_TX_VALUE); + break; + } + if (descr == card->tx_chain.head) + break; + descr = descr->next; + } + +out: + mod_timer(&card->tx_timer, jiffies + SPIDER_NET_TX_TIMER); } /** @@ -915,47 +796,69 @@ spider_net_kick_tx_dma(struct spider_net_card *card, * @skb: packet to send out * @netdev: interface device structure * - * returns 0 on success, <0 on failure + * returns 0 on success, !0 on failure */ static int spider_net_xmit(struct sk_buff *skb, struct net_device *netdev) { struct spider_net_card *card = netdev_priv(netdev); - struct spider_net_descr *descr; + struct spider_net_descr_chain *chain = &card->tx_chain; + struct spider_net_descr *descr = chain->head; + unsigned long flags; int result; + spin_lock_irqsave(&chain->lock, flags); + spider_net_release_tx_chain(card, 0); - descr = spider_net_get_next_tx_descr(card); + if (chain->head->next == chain->tail->prev) { + card->netdev_stats.tx_dropped++; + result = NETDEV_TX_LOCKED; + goto out; + } - if (!descr) - goto error; + if (spider_net_get_descr_status(descr) != SPIDER_NET_DESCR_NOT_IN_USE) { + result = NETDEV_TX_LOCKED; + goto out; + } - result = spider_net_prepare_tx_descr(card, descr, skb); - if (result) - goto error; + if (spider_net_prepare_tx_descr(card, skb) != 0) { + card->netdev_stats.tx_dropped++; + result = NETDEV_TX_BUSY; + goto out; + } + + result = NETDEV_TX_OK; + spider_net_kick_tx_dma(card); card->tx_chain.head = card->tx_chain.head->next; - if (spider_net_get_descr_status(descr->prev) != - SPIDER_NET_DESCR_CARDOWNED) { - /* make sure the current descriptor is in memory. Then - * kicking it on again makes sense, if the previous is not - * card-owned anymore. Check the previous descriptor twice - * to omit an mb() in heavy traffic cases */ - mb(); - if (spider_net_get_descr_status(descr->prev) != - SPIDER_NET_DESCR_CARDOWNED) - spider_net_kick_tx_dma(card, descr); - } +out: + spin_unlock_irqrestore(&chain->lock, flags); + netif_wake_queue(netdev); + return result; +} - mod_timer(&card->tx_timer, jiffies + SPIDER_NET_TX_TIMER); +/** + * spider_net_cleanup_tx_ring - cleans up the TX ring + * @card: card structure + * + * spider_net_cleanup_tx_ring is called by the tx_timer (as we don't use + * interrupts to cleanup our TX ring) and returns sent packets to the stack + * by freeing them + */ +static void +spider_net_cleanup_tx_ring(struct spider_net_card *card) +{ + unsigned long flags; - return NETDEV_TX_OK; + spin_lock_irqsave(&card->tx_chain.lock, flags); -error: - card->netdev_stats.tx_dropped++; - return NETDEV_TX_BUSY; + if ((spider_net_release_tx_chain(card, 0) != 0) && + (card->netdev->flags & IFF_UP)) + spider_net_kick_tx_dma(card); + + spin_unlock_irqrestore(&card->tx_chain.lock, flags); } /** @@ -1002,7 +905,7 @@ spider_net_pass_skb_up(struct spider_net_descr *descr, /* unmap descriptor */ pci_unmap_single(card->pdev, descr->buf_addr, SPIDER_NET_MAX_FRAME, - PCI_DMA_BIDIRECTIONAL); + PCI_DMA_FROMDEVICE); /* the cases we'll throw away the packet immediately */ if (data_error & SPIDER_NET_DESTROY_RX_FLAGS) { @@ -1067,14 +970,11 @@ spider_net_pass_skb_up(struct spider_net_descr *descr, static int spider_net_decode_one_descr(struct spider_net_card *card, int napi) { - enum spider_net_descr_status status; - struct spider_net_descr *descr; - struct spider_net_descr_chain *chain; + struct spider_net_descr_chain *chain = &card->rx_chain; + struct spider_net_descr *descr = chain->tail; + int status; int result; - chain = &card->rx_chain; - descr = chain->tail; - status = spider_net_get_descr_status(descr); if (status == SPIDER_NET_DESCR_CARDOWNED) { @@ -1103,7 +1003,7 @@ spider_net_decode_one_descr(struct spider_net_card *card, int napi) card->netdev->name, status); card->netdev_stats.rx_dropped++; pci_unmap_single(card->pdev, descr->buf_addr, - SPIDER_NET_MAX_FRAME, PCI_DMA_BIDIRECTIONAL); + SPIDER_NET_MAX_FRAME, PCI_DMA_FROMDEVICE); dev_kfree_skb_irq(descr->skb); goto refill; } @@ -1119,7 +1019,7 @@ spider_net_decode_one_descr(struct spider_net_card *card, int napi) /* ok, we've got a packet in descr */ result = spider_net_pass_skb_up(descr, card, napi); refill: - spider_net_set_descr_status(descr, SPIDER_NET_DESCR_NOT_IN_USE); + descr->dmac_cmd_status = SPIDER_NET_DESCR_NOT_IN_USE; /* change the descriptor state: */ if (!napi) spider_net_refill_rx_chain(card); @@ -1290,21 +1190,6 @@ spider_net_set_mac(struct net_device *netdev, void *p) return 0; } -/** - * spider_net_enable_txdmac - enables a TX DMA controller - * @card: card structure - * - * spider_net_enable_txdmac enables the TX DMA controller by setting the - * descriptor chain tail address - */ -static void -spider_net_enable_txdmac(struct spider_net_card *card) -{ - /* assume chain is aligned correctly */ - spider_net_write_reg(card, SPIDER_NET_GDTDCHA, - card->tx_chain.tail->bus_addr); -} - /** * spider_net_handle_rxram_full - cleans up RX ring upon RX RAM full interrupt * @card: card structure @@ -1653,7 +1538,6 @@ spider_net_enable_card(struct spider_net_card *card) { SPIDER_NET_GMRWOLCTRL, 0 }, { SPIDER_NET_GTESTMD, 0x10000000 }, { SPIDER_NET_GTTQMSK, 0x00400040 }, - { SPIDER_NET_GTESTMD, 0 }, { SPIDER_NET_GMACINTEN, 0 }, @@ -1692,9 +1576,6 @@ spider_net_enable_card(struct spider_net_card *card) spider_net_write_reg(card, SPIDER_NET_GRXDMAEN, SPIDER_NET_WOL_VALUE); - /* set chain tail adress for TX chain */ - spider_net_enable_txdmac(card); - spider_net_write_reg(card, SPIDER_NET_GMACLENLMT, SPIDER_NET_LENLMT_VALUE); spider_net_write_reg(card, SPIDER_NET_GMACMODE, @@ -1709,6 +1590,9 @@ spider_net_enable_card(struct spider_net_card *card) SPIDER_NET_INT1_MASK_VALUE); spider_net_write_reg(card, SPIDER_NET_GHIINT2MSK, SPIDER_NET_INT2_MASK_VALUE); + + spider_net_write_reg(card, SPIDER_NET_GDTDMACCNTR, + SPIDER_NET_GDTDCEIDIS); } /** @@ -1728,10 +1612,12 @@ spider_net_open(struct net_device *netdev) result = -ENOMEM; if (spider_net_init_chain(card, &card->tx_chain, - card->descr, tx_descriptors)) + card->descr, + PCI_DMA_TODEVICE, tx_descriptors)) goto alloc_tx_failed; if (spider_net_init_chain(card, &card->rx_chain, - card->descr + tx_descriptors, rx_descriptors)) + card->descr + tx_descriptors, + PCI_DMA_FROMDEVICE, rx_descriptors)) goto alloc_rx_failed; /* allocate rx skbs */ @@ -1954,6 +1840,49 @@ spider_net_workaround_rxramfull(struct spider_net_card *card) SPIDER_NET_CKRCTRL_STOP_VALUE); } +/** + * spider_net_stop - called upon ifconfig down + * @netdev: interface device structure + * + * always returns 0 + */ +int +spider_net_stop(struct net_device *netdev) +{ + struct spider_net_card *card = netdev_priv(netdev); + + tasklet_kill(&card->rxram_full_tl); + netif_poll_disable(netdev); + netif_carrier_off(netdev); + netif_stop_queue(netdev); + del_timer_sync(&card->tx_timer); + + /* disable/mask all interrupts */ + spider_net_write_reg(card, SPIDER_NET_GHIINT0MSK, 0); + spider_net_write_reg(card, SPIDER_NET_GHIINT1MSK, 0); + spider_net_write_reg(card, SPIDER_NET_GHIINT2MSK, 0); + + /* free_irq(netdev->irq, netdev);*/ + free_irq(to_pci_dev(netdev->class_dev.dev)->irq, netdev); + + spider_net_write_reg(card, SPIDER_NET_GDTDMACCNTR, + SPIDER_NET_DMA_TX_FEND_VALUE); + + /* turn off DMA, force end */ + spider_net_disable_rxdmac(card); + + /* release chains */ + if (spin_trylock(&card->tx_chain.lock)) { + spider_net_release_tx_chain(card, 1); + spin_unlock(&card->tx_chain.lock); + } + + spider_net_free_chain(card, &card->tx_chain); + spider_net_free_chain(card, &card->rx_chain); + + return 0; +} + /** * spider_net_tx_timeout_task - task scheduled by the watchdog timeout * function (to be called not under interrupt status) @@ -1982,7 +1911,7 @@ spider_net_tx_timeout_task(void *data) goto out; spider_net_open(netdev); - spider_net_kick_tx_dma(card, card->tx_chain.head); + spider_net_kick_tx_dma(card); netif_device_attach(netdev); out: @@ -2065,7 +1994,6 @@ spider_net_setup_netdev(struct spider_net_card *card) pci_set_drvdata(card->pdev, netdev); - atomic_set(&card->tx_chain_release,0); card->rxram_full_tl.data = (unsigned long) card; card->rxram_full_tl.func = (void (*)(unsigned long)) spider_net_handle_rxram_full; @@ -2079,7 +2007,7 @@ spider_net_setup_netdev(struct spider_net_card *card) spider_net_setup_netdev_ops(netdev); - netdev->features = NETIF_F_HW_CSUM; + netdev->features = NETIF_F_HW_CSUM | NETIF_F_LLTX; /* some time: NETIF_F_HW_VLAN_TX | NETIF_F_HW_VLAN_RX | * NETIF_F_HW_VLAN_FILTER */ diff --git a/drivers/net/spider_net.h b/drivers/net/spider_net.h index 3b8d951cf73..f6dcf180ae3 100644 --- a/drivers/net/spider_net.h +++ b/drivers/net/spider_net.h @@ -208,7 +208,10 @@ extern char spider_net_driver_name[]; #define SPIDER_NET_DMA_RX_VALUE 0x80000000 #define SPIDER_NET_DMA_RX_FEND_VALUE 0x00030003 /* to set TX_DMA_EN */ -#define SPIDER_NET_DMA_TX_VALUE 0x80000000 +#define SPIDER_NET_TX_DMA_EN 0x80000000 +#define SPIDER_NET_GDTDCEIDIS 0x00000002 +#define SPIDER_NET_DMA_TX_VALUE SPIDER_NET_TX_DMA_EN | \ + SPIDER_NET_GDTDCEIDIS #define SPIDER_NET_DMA_TX_FEND_VALUE 0x00030003 /* SPIDER_NET_UA_DESCR_VALUE is OR'ed with the unicast address */ @@ -329,55 +332,23 @@ enum spider_net_int2_status { (~SPIDER_NET_TXINT) & \ (~SPIDER_NET_RXINT) ) -#define SPIDER_NET_GPREXEC 0x80000000 -#define SPIDER_NET_GPRDAT_MASK 0x0000ffff +#define SPIDER_NET_GPREXEC 0x80000000 +#define SPIDER_NET_GPRDAT_MASK 0x0000ffff -/* descriptor bits - * - * 1010 descriptor ready - * 0 descr in middle of chain - * 000 fixed to 0 - * - * 0 no interrupt on completion - * 000 fixed to 0 - * 1 no ipsec processing - * 1 last descriptor for this frame - * 00 no checksum - * 10 tcp checksum - * 11 udp checksum - * - * 00 fixed to 0 - * 0 fixed to 0 - * 0 no interrupt on response errors - * 0 no interrupt on invalid descr - * 0 no interrupt on dma process termination - * 0 no interrupt on descr chain end - * 0 no interrupt on descr complete - * - * 000 fixed to 0 - * 0 response error interrupt status - * 0 invalid descr status - * 0 dma termination status - * 0 descr chain end status - * 0 descr complete status */ -#define SPIDER_NET_DMAC_CMDSTAT_NOCS 0xa00c0000 -#define SPIDER_NET_DMAC_CMDSTAT_TCPCS 0xa00e0000 -#define SPIDER_NET_DMAC_CMDSTAT_UDPCS 0xa00f0000 -#define SPIDER_NET_DESCR_IND_PROC_SHIFT 28 -#define SPIDER_NET_DESCR_IND_PROC_MASKO 0x0fffffff - -/* descr ready, descr is in middle of chain, get interrupt on completion */ -#define SPIDER_NET_DMAC_RX_CARDOWNED 0xa0800000 - -enum spider_net_descr_status { - SPIDER_NET_DESCR_COMPLETE = 0x00, /* used in rx and tx */ - SPIDER_NET_DESCR_RESPONSE_ERROR = 0x01, /* used in rx and tx */ - SPIDER_NET_DESCR_PROTECTION_ERROR = 0x02, /* used in rx and tx */ - SPIDER_NET_DESCR_FRAME_END = 0x04, /* used in rx */ - SPIDER_NET_DESCR_FORCE_END = 0x05, /* used in rx and tx */ - SPIDER_NET_DESCR_CARDOWNED = 0x0a, /* used in rx and tx */ - SPIDER_NET_DESCR_NOT_IN_USE /* any other value */ -}; +#define SPIDER_NET_DMAC_NOINTR_COMPLETE 0x00800000 +#define SPIDER_NET_DMAC_NOCS 0x00040000 +#define SPIDER_NET_DMAC_TCP 0x00020000 +#define SPIDER_NET_DMAC_UDP 0x00030000 +#define SPIDER_NET_TXDCEST 0x08000000 + +#define SPIDER_NET_DESCR_IND_PROC_MASK 0xF0000000 +#define SPIDER_NET_DESCR_COMPLETE 0x00000000 /* used in rx and tx */ +#define SPIDER_NET_DESCR_RESPONSE_ERROR 0x10000000 /* used in rx and tx */ +#define SPIDER_NET_DESCR_PROTECTION_ERROR 0x20000000 /* used in rx and tx */ +#define SPIDER_NET_DESCR_FRAME_END 0x40000000 /* used in rx */ +#define SPIDER_NET_DESCR_FORCE_END 0x50000000 /* used in rx and tx */ +#define SPIDER_NET_DESCR_CARDOWNED 0xA0000000 /* used in rx and tx */ +#define SPIDER_NET_DESCR_NOT_IN_USE 0xF0000000 struct spider_net_descr { /* as defined by the hardware */ @@ -398,7 +369,7 @@ struct spider_net_descr { } __attribute__((aligned(32))); struct spider_net_descr_chain { - /* we walk from tail to head */ + spinlock_t lock; struct spider_net_descr *head; struct spider_net_descr *tail; }; @@ -453,8 +424,6 @@ struct spider_net_card { struct spider_net_descr_chain tx_chain; struct spider_net_descr_chain rx_chain; - atomic_t rx_chain_refill; - atomic_t tx_chain_release; struct net_device_stats netdev_stats; -- cgit v1.2.3-70-g09d2 From 59b693fbbec37765426ba0916920ff93d2e26eb3 Mon Sep 17 00:00:00 2001 From: Jay Cliburn Date: Thu, 20 Jul 2006 23:23:57 +0200 Subject: via-velocity: fix speed and link status reported by ethtool The via-velocity driver reports incorrect speed and link detected status as viewed by ethtool (and probably other tools). This patch fixes those incorrect reports and prettifies a long line. Signed-off-by: Jay Cliburn Signed-off-by: Francois Romieu --- drivers/net/via-velocity.c | 17 +++++++++++++---- 1 file changed, 13 insertions(+), 4 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/via-velocity.c b/drivers/net/via-velocity.c index f5b0078eb4a..aa9cd92f46b 100644 --- a/drivers/net/via-velocity.c +++ b/drivers/net/via-velocity.c @@ -2742,7 +2742,7 @@ static u32 check_connection_type(struct mac_regs __iomem * regs) if (PHYSR0 & PHYSR0_SPDG) status |= VELOCITY_SPEED_1000; - if (PHYSR0 & PHYSR0_SPD10) + else if (PHYSR0 & PHYSR0_SPD10) status |= VELOCITY_SPEED_10; else status |= VELOCITY_SPEED_100; @@ -2851,8 +2851,17 @@ static int velocity_get_settings(struct net_device *dev, struct ethtool_cmd *cmd u32 status; status = check_connection_type(vptr->mac_regs); - cmd->supported = SUPPORTED_TP | SUPPORTED_Autoneg | SUPPORTED_10baseT_Half | SUPPORTED_10baseT_Full | SUPPORTED_100baseT_Half | SUPPORTED_100baseT_Full | SUPPORTED_1000baseT_Half | SUPPORTED_1000baseT_Full; - if (status & VELOCITY_SPEED_100) + cmd->supported = SUPPORTED_TP | + SUPPORTED_Autoneg | + SUPPORTED_10baseT_Half | + SUPPORTED_10baseT_Full | + SUPPORTED_100baseT_Half | + SUPPORTED_100baseT_Full | + SUPPORTED_1000baseT_Half | + SUPPORTED_1000baseT_Full; + if (status & VELOCITY_SPEED_1000) + cmd->speed = SPEED_1000; + else if (status & VELOCITY_SPEED_100) cmd->speed = SPEED_100; else cmd->speed = SPEED_10; @@ -2896,7 +2905,7 @@ static u32 velocity_get_link(struct net_device *dev) { struct velocity_info *vptr = netdev_priv(dev); struct mac_regs __iomem * regs = vptr->mac_regs; - return BYTE_REG_BITS_IS_ON(PHYSR0_LINKGD, ®s->PHYSR0) ? 0 : 1; + return BYTE_REG_BITS_IS_ON(PHYSR0_LINKGD, ®s->PHYSR0) ? 1 : 0; } static void velocity_get_drvinfo(struct net_device *dev, struct ethtool_drvinfo *info) -- cgit v1.2.3-70-g09d2 From 4bc83b4d409edacb33db6c71d03e963d9728476c Mon Sep 17 00:00:00 2001 From: Krzysztof Halasa Date: Fri, 21 Jul 2006 14:41:01 -0700 Subject: [WAN]: Added missing netif_dormant_off() to generic HDLC WAN: Fixed a problem with PPP/raw HDLC/X.25 protocols not doing netif_dormant_off() at startup. Signed-off-by: Krzysztof Halasa Signed-off-by: David S. Miller --- drivers/net/wan/hdlc_ppp.c | 1 + drivers/net/wan/hdlc_raw.c | 1 + drivers/net/wan/hdlc_raw_eth.c | 1 + drivers/net/wan/hdlc_x25.c | 1 + 4 files changed, 4 insertions(+) (limited to 'drivers/net') diff --git a/drivers/net/wan/hdlc_ppp.c b/drivers/net/wan/hdlc_ppp.c index b81263eaede..fbaab5bf71e 100644 --- a/drivers/net/wan/hdlc_ppp.c +++ b/drivers/net/wan/hdlc_ppp.c @@ -107,6 +107,7 @@ int hdlc_ppp_ioctl(struct net_device *dev, struct ifreq *ifr) dev->hard_header = NULL; dev->type = ARPHRD_PPP; dev->addr_len = 0; + netif_dormant_off(dev); return 0; } diff --git a/drivers/net/wan/hdlc_raw.c b/drivers/net/wan/hdlc_raw.c index 9456d31cb1c..f15aa6ba77f 100644 --- a/drivers/net/wan/hdlc_raw.c +++ b/drivers/net/wan/hdlc_raw.c @@ -82,6 +82,7 @@ int hdlc_raw_ioctl(struct net_device *dev, struct ifreq *ifr) dev->type = ARPHRD_RAWHDLC; dev->flags = IFF_POINTOPOINT | IFF_NOARP; dev->addr_len = 0; + netif_dormant_off(dev); return 0; } diff --git a/drivers/net/wan/hdlc_raw_eth.c b/drivers/net/wan/hdlc_raw_eth.c index b1285cc8fee..d1884987f94 100644 --- a/drivers/net/wan/hdlc_raw_eth.c +++ b/drivers/net/wan/hdlc_raw_eth.c @@ -100,6 +100,7 @@ int hdlc_raw_eth_ioctl(struct net_device *dev, struct ifreq *ifr) dev->tx_queue_len = old_qlen; memcpy(dev->dev_addr, "\x00\x01", 2); get_random_bytes(dev->dev_addr + 2, ETH_ALEN - 2); + netif_dormant_off(dev); return 0; } diff --git a/drivers/net/wan/hdlc_x25.c b/drivers/net/wan/hdlc_x25.c index 07e5eef1fe0..a867fb411f8 100644 --- a/drivers/net/wan/hdlc_x25.c +++ b/drivers/net/wan/hdlc_x25.c @@ -212,6 +212,7 @@ int hdlc_x25_ioctl(struct net_device *dev, struct ifreq *ifr) dev->hard_header = NULL; dev->type = ARPHRD_X25; dev->addr_len = 0; + netif_dormant_off(dev); return 0; } -- cgit v1.2.3-70-g09d2 From 41b1d174442d0845e58af4b1b171930fc09872c7 Mon Sep 17 00:00:00 2001 From: Krzysztof Halasa Date: Fri, 21 Jul 2006 14:41:36 -0700 Subject: [WAN]: Cosmetic changes to N2 and C101 drivers WAN: Cosmetic changes to N2 and C101 drivers Signed-off-by: Krzysztof Halasa Signed-off-by: David S. Miller --- drivers/net/wan/c101.c | 4 ++-- drivers/net/wan/n2.c | 3 ++- 2 files changed, 4 insertions(+), 3 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/wan/c101.c b/drivers/net/wan/c101.c index 2c09ec908a3..435e91ec462 100644 --- a/drivers/net/wan/c101.c +++ b/drivers/net/wan/c101.c @@ -197,7 +197,6 @@ static int c101_open(struct net_device *dev) sca_out(IE0_TXINT, MSCI0_OFFSET + IE0, port); set_carrier(port); - printk(KERN_DEBUG "0x%X\n", sca_in(MSCI1_OFFSET + ST3, port)); /* enable MSCI1 CDCD interrupt */ sca_out(IE1_CDCD, MSCI1_OFFSET + IE1, port); @@ -449,4 +448,5 @@ module_exit(c101_cleanup); MODULE_AUTHOR("Krzysztof Halasa "); MODULE_DESCRIPTION("Moxa C101 serial port driver"); MODULE_LICENSE("GPL v2"); -module_param(hw, charp, 0444); /* hw=irq,ram:irq,... */ +module_param(hw, charp, 0444); +MODULE_PARM_DESC(hw, "irq,ram:irq,..."); diff --git a/drivers/net/wan/n2.c b/drivers/net/wan/n2.c index e013b817cab..dcf46add3ad 100644 --- a/drivers/net/wan/n2.c +++ b/drivers/net/wan/n2.c @@ -564,4 +564,5 @@ module_exit(n2_cleanup); MODULE_AUTHOR("Krzysztof Halasa "); MODULE_DESCRIPTION("RISCom/N2 serial port driver"); MODULE_LICENSE("GPL v2"); -module_param(hw, charp, 0444); /* hw=io,irq,ram,ports:io,irq,... */ +module_param(hw, charp, 0444); +MODULE_PARM_DESC(hw, "io,irq,ram,ports:io,irq,..."); -- cgit v1.2.3-70-g09d2 From a0ee7c70b22f78593957f99faa06acb4747b8bc0 Mon Sep 17 00:00:00 2001 From: Jiri Slaby Date: Fri, 21 Jul 2006 14:51:02 -0700 Subject: [NET]: sun happymeal, little pci cleanup Use pci_register_driver instead of pci_module_init. Use PCI_DEVICE macro. Signed-off-by: Jiri Slaby Signed-off-by: David S. Miller --- drivers/net/sunhme.c | 9 ++------- 1 file changed, 2 insertions(+), 7 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/sunhme.c b/drivers/net/sunhme.c index 8673fd4c08c..c6f5bc3c042 100644 --- a/drivers/net/sunhme.c +++ b/drivers/net/sunhme.c @@ -3255,12 +3255,7 @@ static void __devexit happy_meal_pci_remove(struct pci_dev *pdev) } static struct pci_device_id happymeal_pci_ids[] = { - { - .vendor = PCI_VENDOR_ID_SUN, - .device = PCI_DEVICE_ID_SUN_HAPPYMEAL, - .subvendor = PCI_ANY_ID, - .subdevice = PCI_ANY_ID, - }, + { PCI_DEVICE(PCI_VENDOR_ID_SUN, PCI_DEVICE_ID_SUN_HAPPYMEAL) }, { } /* Terminating entry */ }; @@ -3275,7 +3270,7 @@ static struct pci_driver hme_pci_driver = { static int __init happy_meal_pci_init(void) { - return pci_module_init(&hme_pci_driver); + return pci_register_driver(&hme_pci_driver); } static void happy_meal_pci_exit(void) -- cgit v1.2.3-70-g09d2 From 4a9c74e5830444c1c3235848e06402c1d2ece1ea Mon Sep 17 00:00:00 2001 From: Nicolas Dichtel Date: Fri, 21 Jul 2006 14:56:02 -0700 Subject: [IFB] After ifb_init_one() failed, i is increased. Decrease It before entering in the loop for freeing the other ifb devices. Signed-off-by: Nicolas Dichtel Acked-by: Jamal Hadi Salim Signed-off-by: David S. Miller --- drivers/net/ifb.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers/net') diff --git a/drivers/net/ifb.c b/drivers/net/ifb.c index 3a42afab503..43e3f33ed5e 100644 --- a/drivers/net/ifb.c +++ b/drivers/net/ifb.c @@ -271,6 +271,7 @@ static int __init ifb_init_module(void) for (i = 0; i < numifbs && !err; i++) err = ifb_init_one(i); if (err) { + i--; while (--i >= 0) ifb_free_one(i); } -- cgit v1.2.3-70-g09d2 From 9ed36279f68c990d65cd3d64f27d81313474a118 Mon Sep 17 00:00:00 2001 From: Nicolas Dichtel Date: Fri, 21 Jul 2006 15:09:07 -0700 Subject: [DUMMY]: Avoid an oops when dummy_init_one() failed Signed-off-by: Nicolas Dichtel Signed-off-by: David S. Miller --- drivers/net/dummy.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers/net') diff --git a/drivers/net/dummy.c b/drivers/net/dummy.c index 36d511729f7..2146cf74425 100644 --- a/drivers/net/dummy.c +++ b/drivers/net/dummy.c @@ -132,6 +132,7 @@ static int __init dummy_init_module(void) for (i = 0; i < numdummies && !err; i++) err = dummy_init_one(i); if (err) { + i--; while (--i >= 0) dummy_free_one(i); } -- cgit v1.2.3-70-g09d2 From b9ec6c1b917e2e43a058a78198d54aeca3d71c6f Mon Sep 17 00:00:00 2001 From: Michael Chan Date: Tue, 25 Jul 2006 16:37:27 -0700 Subject: [TG3]: Add tg3_restart_hw() Add tg3_restart_hw() to handle failures when re-initializing the device. Signed-off-by: Michael Chan Signed-off-by: David S. Miller --- drivers/net/tg3.c | 80 ++++++++++++++++++++++++++++++++++++++++--------------- 1 file changed, 58 insertions(+), 22 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/tg3.c b/drivers/net/tg3.c index ce6f3be86da..1253cec6ebd 100644 --- a/drivers/net/tg3.c +++ b/drivers/net/tg3.c @@ -3590,6 +3590,28 @@ static irqreturn_t tg3_test_isr(int irq, void *dev_id, static int tg3_init_hw(struct tg3 *, int); static int tg3_halt(struct tg3 *, int, int); +/* Restart hardware after configuration changes, self-test, etc. + * Invoked with tp->lock held. + */ +static int tg3_restart_hw(struct tg3 *tp, int reset_phy) +{ + int err; + + err = tg3_init_hw(tp, reset_phy); + if (err) { + printk(KERN_ERR PFX "%s: Failed to re-initialize device, " + "aborting.\n", tp->dev->name); + tg3_halt(tp, RESET_KIND_SHUTDOWN, 1); + tg3_full_unlock(tp); + del_timer_sync(&tp->timer); + tp->irq_sync = 0; + netif_poll_enable(tp->dev); + dev_close(tp->dev); + tg3_full_lock(tp, 0); + } + return err; +} + #ifdef CONFIG_NET_POLL_CONTROLLER static void tg3_poll_controller(struct net_device *dev) { @@ -3630,13 +3652,15 @@ static void tg3_reset_task(void *_data) } tg3_halt(tp, RESET_KIND_SHUTDOWN, 0); - tg3_init_hw(tp, 1); + if (tg3_init_hw(tp, 1)) + goto out; tg3_netif_start(tp); if (restart_timer) mod_timer(&tp->timer, jiffies + 1); +out: tp->tg3_flags &= ~TG3_FLAG_IN_RESET_TASK; tg3_full_unlock(tp); @@ -4124,6 +4148,7 @@ static inline void tg3_set_mtu(struct net_device *dev, struct tg3 *tp, static int tg3_change_mtu(struct net_device *dev, int new_mtu) { struct tg3 *tp = netdev_priv(dev); + int err; if (new_mtu < TG3_MIN_MTU || new_mtu > TG3_MAX_MTU(tp)) return -EINVAL; @@ -4144,13 +4169,14 @@ static int tg3_change_mtu(struct net_device *dev, int new_mtu) tg3_set_mtu(dev, tp, new_mtu); - tg3_init_hw(tp, 0); + err = tg3_restart_hw(tp, 0); - tg3_netif_start(tp); + if (!err) + tg3_netif_start(tp); tg3_full_unlock(tp); - return 0; + return err; } /* Free up pending packets in all rx/tx rings. @@ -5815,6 +5841,7 @@ static int tg3_set_mac_addr(struct net_device *dev, void *p) { struct tg3 *tp = netdev_priv(dev); struct sockaddr *addr = p; + int err = 0; if (!is_valid_ether_addr(addr->sa_data)) return -EINVAL; @@ -5832,9 +5859,9 @@ static int tg3_set_mac_addr(struct net_device *dev, void *p) tg3_full_lock(tp, 1); tg3_halt(tp, RESET_KIND_SHUTDOWN, 1); - tg3_init_hw(tp, 0); - - tg3_netif_start(tp); + err = tg3_restart_hw(tp, 0); + if (!err) + tg3_netif_start(tp); tg3_full_unlock(tp); } else { spin_lock_bh(&tp->lock); @@ -5842,7 +5869,7 @@ static int tg3_set_mac_addr(struct net_device *dev, void *p) spin_unlock_bh(&tp->lock); } - return 0; + return err; } /* tp->lock is held. */ @@ -7956,7 +7983,7 @@ static void tg3_get_ringparam(struct net_device *dev, struct ethtool_ringparam * static int tg3_set_ringparam(struct net_device *dev, struct ethtool_ringparam *ering) { struct tg3 *tp = netdev_priv(dev); - int irq_sync = 0; + int irq_sync = 0, err = 0; if ((ering->rx_pending > TG3_RX_RING_SIZE - 1) || (ering->rx_jumbo_pending > TG3_RX_JUMBO_RING_SIZE - 1) || @@ -7980,13 +8007,14 @@ static int tg3_set_ringparam(struct net_device *dev, struct ethtool_ringparam *e if (netif_running(dev)) { tg3_halt(tp, RESET_KIND_SHUTDOWN, 1); - tg3_init_hw(tp, 1); - tg3_netif_start(tp); + err = tg3_restart_hw(tp, 1); + if (!err) + tg3_netif_start(tp); } tg3_full_unlock(tp); - return 0; + return err; } static void tg3_get_pauseparam(struct net_device *dev, struct ethtool_pauseparam *epause) @@ -8001,7 +8029,7 @@ static void tg3_get_pauseparam(struct net_device *dev, struct ethtool_pauseparam static int tg3_set_pauseparam(struct net_device *dev, struct ethtool_pauseparam *epause) { struct tg3 *tp = netdev_priv(dev); - int irq_sync = 0; + int irq_sync = 0, err = 0; if (netif_running(dev)) { tg3_netif_stop(tp); @@ -8025,13 +8053,14 @@ static int tg3_set_pauseparam(struct net_device *dev, struct ethtool_pauseparam if (netif_running(dev)) { tg3_halt(tp, RESET_KIND_SHUTDOWN, 1); - tg3_init_hw(tp, 1); - tg3_netif_start(tp); + err = tg3_restart_hw(tp, 1); + if (!err) + tg3_netif_start(tp); } tg3_full_unlock(tp); - return 0; + return err; } static u32 tg3_get_rx_csum(struct net_device *dev) @@ -8666,7 +8695,9 @@ static int tg3_test_loopback(struct tg3 *tp) if (!netif_running(tp->dev)) return TG3_LOOPBACK_FAILED; - tg3_reset_hw(tp, 1); + err = tg3_reset_hw(tp, 1); + if (err) + return TG3_LOOPBACK_FAILED; if (tg3_run_loopback(tp, TG3_MAC_LOOPBACK)) err |= TG3_MAC_LOOPBACK_FAILED; @@ -8740,8 +8771,8 @@ static void tg3_self_test(struct net_device *dev, struct ethtool_test *etest, tg3_halt(tp, RESET_KIND_SHUTDOWN, 1); if (netif_running(dev)) { tp->tg3_flags |= TG3_FLAG_INIT_COMPLETE; - tg3_init_hw(tp, 1); - tg3_netif_start(tp); + if (!tg3_restart_hw(tp, 1)) + tg3_netif_start(tp); } tg3_full_unlock(tp); @@ -11699,7 +11730,8 @@ static int tg3_suspend(struct pci_dev *pdev, pm_message_t state) tg3_full_lock(tp, 0); tp->tg3_flags |= TG3_FLAG_INIT_COMPLETE; - tg3_init_hw(tp, 1); + if (tg3_restart_hw(tp, 1)) + goto out; tp->timer.expires = jiffies + tp->timer_offset; add_timer(&tp->timer); @@ -11707,6 +11739,7 @@ static int tg3_suspend(struct pci_dev *pdev, pm_message_t state) netif_device_attach(dev); tg3_netif_start(tp); +out: tg3_full_unlock(tp); } @@ -11733,16 +11766,19 @@ static int tg3_resume(struct pci_dev *pdev) tg3_full_lock(tp, 0); tp->tg3_flags |= TG3_FLAG_INIT_COMPLETE; - tg3_init_hw(tp, 1); + err = tg3_restart_hw(tp, 1); + if (err) + goto out; tp->timer.expires = jiffies + tp->timer_offset; add_timer(&tp->timer); tg3_netif_start(tp); +out: tg3_full_unlock(tp); - return 0; + return err; } static struct pci_driver tg3_driver = { -- cgit v1.2.3-70-g09d2 From 32d8c5724b7b05c7d8f7386c49432104cc222e32 Mon Sep 17 00:00:00 2001 From: Michael Chan Date: Tue, 25 Jul 2006 16:38:29 -0700 Subject: [TG3]: Handle tg3_init_rings() failures Handle dev_alloc_skb() failures when initializing the RX rings. Without proper handling, the driver will crash when using a partial ring. Thanks to Stephane Doyon for reporting the bug and providing the initial patch. Howie Xu also reported the same issue. Signed-off-by: Michael Chan Signed-off-by: David S. Miller --- drivers/net/tg3.c | 32 +++++++++++++++++++++++++++----- 1 file changed, 27 insertions(+), 5 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/tg3.c b/drivers/net/tg3.c index 1253cec6ebd..d66b06f2b86 100644 --- a/drivers/net/tg3.c +++ b/drivers/net/tg3.c @@ -4258,7 +4258,7 @@ static void tg3_free_rings(struct tg3 *tp) * end up in the driver. tp->{tx,}lock are held and thus * we may not sleep. */ -static void tg3_init_rings(struct tg3 *tp) +static int tg3_init_rings(struct tg3 *tp) { u32 i; @@ -4307,18 +4307,38 @@ static void tg3_init_rings(struct tg3 *tp) /* Now allocate fresh SKBs for each rx ring. */ for (i = 0; i < tp->rx_pending; i++) { - if (tg3_alloc_rx_skb(tp, RXD_OPAQUE_RING_STD, - -1, i) < 0) + if (tg3_alloc_rx_skb(tp, RXD_OPAQUE_RING_STD, -1, i) < 0) { + printk(KERN_WARNING PFX + "%s: Using a smaller RX standard ring, " + "only %d out of %d buffers were allocated " + "successfully.\n", + tp->dev->name, i, tp->rx_pending); + if (i == 0) + return -ENOMEM; + tp->rx_pending = i; break; + } } if (tp->tg3_flags & TG3_FLAG_JUMBO_RING_ENABLE) { for (i = 0; i < tp->rx_jumbo_pending; i++) { if (tg3_alloc_rx_skb(tp, RXD_OPAQUE_RING_JUMBO, - -1, i) < 0) + -1, i) < 0) { + printk(KERN_WARNING PFX + "%s: Using a smaller RX jumbo ring, " + "only %d out of %d buffers were " + "allocated successfully.\n", + tp->dev->name, i, tp->rx_jumbo_pending); + if (i == 0) { + tg3_free_rings(tp); + return -ENOMEM; + } + tp->rx_jumbo_pending = i; break; + } } } + return 0; } /* @@ -5969,7 +5989,9 @@ static int tg3_reset_hw(struct tg3 *tp, int reset_phy) * can only do this after the hardware has been * successfully reset. */ - tg3_init_rings(tp); + err = tg3_init_rings(tp); + if (err) + return err; /* This value is determined during the probe time DMA * engine test, tg3_test_dma. -- cgit v1.2.3-70-g09d2 From b6e77a5346d8a739227ed73c2269966a4fd652b4 Mon Sep 17 00:00:00 2001 From: Michael Chan Date: Tue, 25 Jul 2006 16:39:12 -0700 Subject: [TG3]: Update version and reldate Update version to 3.63. Signed-off-by: Michael Chan Signed-off-by: David S. Miller --- drivers/net/tg3.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/tg3.c b/drivers/net/tg3.c index d66b06f2b86..1b8138f641e 100644 --- a/drivers/net/tg3.c +++ b/drivers/net/tg3.c @@ -68,8 +68,8 @@ #define DRV_MODULE_NAME "tg3" #define PFX DRV_MODULE_NAME ": " -#define DRV_MODULE_VERSION "3.62" -#define DRV_MODULE_RELDATE "June 30, 2006" +#define DRV_MODULE_VERSION "3.63" +#define DRV_MODULE_RELDATE "July 25, 2006" #define TG3_DEF_MAC_MODE 0 #define TG3_DEF_RX_MODE 0 -- cgit v1.2.3-70-g09d2 From d91928e906e2866563a69506bb77ffebcf50613c Mon Sep 17 00:00:00 2001 From: Pavel Machek Date: Thu, 27 Jul 2006 14:32:40 -0400 Subject: [PATCH] zd1201: workaround interference problem zd1201 has nasty tendency to emit magicall anti-wifi cloud when it is inserted into slot, but not used. Signed-off-by: Pavel Machek Signed-off-by: John W. Linville --- drivers/net/wireless/zd1201.c | 2 ++ 1 file changed, 2 insertions(+) (limited to 'drivers/net') diff --git a/drivers/net/wireless/zd1201.c b/drivers/net/wireless/zd1201.c index 662ecc8a33f..c52e9bcf8d0 100644 --- a/drivers/net/wireless/zd1201.c +++ b/drivers/net/wireless/zd1201.c @@ -1820,6 +1820,8 @@ static int zd1201_probe(struct usb_interface *interface, zd->dev->name); usb_set_intfdata(interface, zd); + zd1201_enable(zd); /* zd1201 likes to startup enabled, */ + zd1201_disable(zd); /* interfering with all the wifis in range */ return 0; err_net: -- cgit v1.2.3-70-g09d2 From 8fa9ea18e831417159b7b1a76a944f117252f9ec Mon Sep 17 00:00:00 2001 From: Robert Schulze Date: Wed, 5 Jul 2006 22:52:43 +0200 Subject: [PATCH] airo: should select crypto_aes The driver airo (for Cisco Wlan-Cards) complains about "failed to load transform for AES", when it is loaded and CRYPTO_AES is not selected in Kconfig. Signed-off-by: John W. Linville --- drivers/net/wireless/Kconfig | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers/net') diff --git a/drivers/net/wireless/Kconfig b/drivers/net/wireless/Kconfig index fa9d2c4edc9..2e8ac995d56 100644 --- a/drivers/net/wireless/Kconfig +++ b/drivers/net/wireless/Kconfig @@ -447,6 +447,7 @@ config AIRO_CS tristate "Cisco/Aironet 34X/35X/4500/4800 PCMCIA cards" depends on NET_RADIO && PCMCIA && (BROKEN || !M32R) select CRYPTO + select CRYPTO_AES ---help--- This is the standard Linux driver to support Cisco/Aironet PCMCIA 802.11 wireless cards. This driver is the same as the Aironet -- cgit v1.2.3-70-g09d2 From 345f6b8beb20338a2d792bf5974d01d457abee53 Mon Sep 17 00:00:00 2001 From: Daniel Drake Date: Tue, 11 Jul 2006 23:16:34 +0100 Subject: [PATCH] softmac: do shared key auth in workqueue Johann Uhrmann reported a bcm43xx crash and Michael Buesch tracked it down to a problem with the new shared key auth code (recursive calls into the driver) This patch (effectively Michael's patch with a couple of small modifications) solves the problem by sending the authentication challenge response frame from a workqueue entry. I also removed a lone \n from the bcm43xx messages relating to authentication mode - this small change was previously discussed but not patched in. Signed-off-by: Daniel Drake Acked-by: Johannes Berg Signed-off-by: Michael Buesch Signed-off-by: John W. Linville --- drivers/net/wireless/bcm43xx/bcm43xx_main.c | 2 +- net/ieee80211/softmac/ieee80211softmac_auth.c | 28 +++++++++++++++++++++------ 2 files changed, 23 insertions(+), 7 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/wireless/bcm43xx/bcm43xx_main.c b/drivers/net/wireless/bcm43xx/bcm43xx_main.c index 3889f79e712..df317c1e12a 100644 --- a/drivers/net/wireless/bcm43xx/bcm43xx_main.c +++ b/drivers/net/wireless/bcm43xx/bcm43xx_main.c @@ -3701,7 +3701,7 @@ static void bcm43xx_ieee80211_set_security(struct net_device *net_dev, } if (sec->flags & SEC_AUTH_MODE) { secinfo->auth_mode = sec->auth_mode; - dprintk(", .auth_mode = %d\n", sec->auth_mode); + dprintk(", .auth_mode = %d", sec->auth_mode); } dprintk("\n"); if (bcm43xx_status(bcm) == BCM43xx_STAT_INITIALIZED && diff --git a/net/ieee80211/softmac/ieee80211softmac_auth.c b/net/ieee80211/softmac/ieee80211softmac_auth.c index ebc33ca6e69..4cef39e171d 100644 --- a/net/ieee80211/softmac/ieee80211softmac_auth.c +++ b/net/ieee80211/softmac/ieee80211softmac_auth.c @@ -116,6 +116,16 @@ ieee80211softmac_auth_queue(void *data) kfree(auth); } +/* Sends a response to an auth challenge (for shared key auth). */ +static void +ieee80211softmac_auth_challenge_response(void *_aq) +{ + struct ieee80211softmac_auth_queue_item *aq = _aq; + + /* Send our response */ + ieee80211softmac_send_mgt_frame(aq->mac, aq->net, IEEE80211_STYPE_AUTH, aq->state); +} + /* Handle the auth response from the AP * This should be registered with ieee80211 as handle_auth */ @@ -197,24 +207,30 @@ ieee80211softmac_auth_resp(struct net_device *dev, struct ieee80211_auth *auth) case IEEE80211SOFTMAC_AUTH_SHARED_CHALLENGE: /* Check to make sure we have a challenge IE */ data = (u8 *)auth->info_element; - if(*data++ != MFIE_TYPE_CHALLENGE){ + if (*data++ != MFIE_TYPE_CHALLENGE) { printkl(KERN_NOTICE PFX "Shared Key Authentication failed due to a missing challenge.\n"); break; } /* Save the challenge */ spin_lock_irqsave(&mac->lock, flags); net->challenge_len = *data++; - if(net->challenge_len > WLAN_AUTH_CHALLENGE_LEN) + if (net->challenge_len > WLAN_AUTH_CHALLENGE_LEN) net->challenge_len = WLAN_AUTH_CHALLENGE_LEN; - if(net->challenge != NULL) + if (net->challenge != NULL) kfree(net->challenge); net->challenge = kmalloc(net->challenge_len, GFP_ATOMIC); memcpy(net->challenge, data, net->challenge_len); aq->state = IEEE80211SOFTMAC_AUTH_SHARED_RESPONSE; - spin_unlock_irqrestore(&mac->lock, flags); - /* Send our response */ - ieee80211softmac_send_mgt_frame(mac, aq->net, IEEE80211_STYPE_AUTH, aq->state); + /* We reuse the work struct from the auth request here. + * It is safe to do so as each one is per-request, and + * at this point (dealing with authentication response) + * we have obviously already sent the initial auth + * request. */ + cancel_delayed_work(&aq->work); + INIT_WORK(&aq->work, &ieee80211softmac_auth_challenge_response, (void *)aq); + schedule_work(&aq->work); + spin_unlock_irqrestore(&mac->lock, flags); return 0; case IEEE80211SOFTMAC_AUTH_SHARED_PASS: kfree(net->challenge); -- cgit v1.2.3-70-g09d2 From fe397d469fa3fbc678383ffbd0630e4849cca688 Mon Sep 17 00:00:00 2001 From: Dan Williams Date: Fri, 14 Jul 2006 11:41:47 -0400 Subject: [PATCH] orinoco: fix setting transmit key only When determining whether there's a key to set or not, orinoco should be looking at the key length, not the key data. Otherwise confusion reigns when trying to set TX key only, passing in zero-length key, but non-NULL pointer. Key length takes precedence over non-NULL key data. Signed-off-by: Dan Williams Signed-off-by: John W. Linville --- drivers/net/wireless/orinoco.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/wireless/orinoco.c b/drivers/net/wireless/orinoco.c index d6ed5781b93..317ace7f9aa 100644 --- a/drivers/net/wireless/orinoco.c +++ b/drivers/net/wireless/orinoco.c @@ -2875,7 +2875,7 @@ static int orinoco_ioctl_setiwencode(struct net_device *dev, if (orinoco_lock(priv, &flags) != 0) return -EBUSY; - if (erq->pointer) { + if (erq->length > 0) { if ((index < 0) || (index >= ORINOCO_MAX_KEYS)) index = priv->tx_key; @@ -2918,7 +2918,7 @@ static int orinoco_ioctl_setiwencode(struct net_device *dev, if (erq->flags & IW_ENCODE_RESTRICTED) restricted = 1; - if (erq->pointer) { + if (erq->pointer && erq->length > 0) { priv->keys[index].len = cpu_to_le16(xlen); memset(priv->keys[index].data, 0, sizeof(priv->keys[index].data)); -- cgit v1.2.3-70-g09d2 From 93853fd0d492524e9172297d8e8b8364dc2c4c59 Mon Sep 17 00:00:00 2001 From: Alexey Dobriyan Date: Fri, 28 Jul 2006 01:09:40 -0700 Subject: [SUNLANCE]: fix compilation on sparc-UP Signed-off-by: Alexey Dobriyan Signed-off-by: David S. Miller --- drivers/net/sunlance.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/sunlance.c b/drivers/net/sunlance.c index 1ef9fd39a79..0e3fdf7c6dd 100644 --- a/drivers/net/sunlance.c +++ b/drivers/net/sunlance.c @@ -1537,7 +1537,7 @@ static int __init sparc_lance_init(void) { if ((idprom->id_machtype == (SM_SUN4|SM_4_330)) || (idprom->id_machtype == (SM_SUN4|SM_4_470))) { - memset(&sun4_sdev, 0, sizeof(sdev)); + memset(&sun4_sdev, 0, sizeof(struct sbus_dev)); sun4_sdev.reg_addrs[0].phys_addr = sun4_eth_physaddr; sun4_sdev.irqs[0] = 6; return sparc_lance_probe_one(&sun4_sdev, NULL, NULL); @@ -1547,16 +1547,16 @@ static int __init sparc_lance_init(void) static int __exit sunlance_sun4_remove(void) { - struct lance_private *lp = dev_get_drvdata(&sun4_sdev->dev); + struct lance_private *lp = dev_get_drvdata(&sun4_sdev.ofdev.dev); struct net_device *net_dev = lp->dev; unregister_netdevice(net_dev); - lance_free_hwresources(root_lance_dev); + lance_free_hwresources(lp); free_netdev(net_dev); - dev_set_drvdata(&sun4_sdev->dev, NULL); + dev_set_drvdata(&sun4_sdev.ofdev.dev, NULL); return 0; } -- cgit v1.2.3-70-g09d2 From 9a71db721a2cbb9921b929b2699ab181f5a3c6c0 Mon Sep 17 00:00:00 2001 From: Brice Goglin Date: Fri, 21 Jul 2006 15:49:32 -0400 Subject: [PATCH] myri10ge - Always do a dummy RDMA after loading the firmware Always do a dummy RDMA after loading the firmware to work around buggy PCIe chipsets which do not implement resending properly. This is so cheap as to be almost free, and should never have been conditional on the tx boundary != 4096. Signed-off-by: Brice Goglin Signed-off-by: Jeff Garzik --- drivers/net/myri10ge/myri10ge.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/net') diff --git a/drivers/net/myri10ge/myri10ge.c b/drivers/net/myri10ge/myri10ge.c index 07ca9480a6f..c3e52c806b1 100644 --- a/drivers/net/myri10ge/myri10ge.c +++ b/drivers/net/myri10ge/myri10ge.c @@ -620,7 +620,7 @@ static int myri10ge_load_firmware(struct myri10ge_priv *mgp) return -ENXIO; } dev_info(&mgp->pdev->dev, "handoff confirmed\n"); - myri10ge_dummy_rdma(mgp, mgp->tx.boundary != 4096); + myri10ge_dummy_rdma(mgp, 1); return 0; } -- cgit v1.2.3-70-g09d2 From 187ff3b8575569668cde9021b9fe70386a4131fb Mon Sep 17 00:00:00 2001 From: Stephen Hemminger Date: Wed, 19 Jul 2006 14:08:42 -0700 Subject: [PATCH] skge: chip clock rate typo Okay, Fix both typo's in one patch .The impact is that the incorrect value was being computed for blinking LED and interrupt moderation values. Signed-off-by: Stephen Hemminger Signed-off-by: Jeff Garzik --- drivers/net/skge.c | 5 +---- 1 file changed, 1 insertion(+), 4 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/skge.c b/drivers/net/skge.c index 82200bfaa8e..7de9a07b2ac 100644 --- a/drivers/net/skge.c +++ b/drivers/net/skge.c @@ -516,10 +516,7 @@ static int skge_set_pauseparam(struct net_device *dev, /* Chip internal frequency for clock calculations */ static inline u32 hwkhz(const struct skge_hw *hw) { - if (hw->chip_id == CHIP_ID_GENESIS) - return 53215; /* or: 53.125 MHz */ - else - return 78215; /* or: 78.125 MHz */ + return (hw->chip_id == CHIP_ID_GENESIS) ? 53125 : 78125; } /* Chip HZ to microseconds */ -- cgit v1.2.3-70-g09d2 From 99f65f25c19a7a8a5789c300c2a575cff3453382 Mon Sep 17 00:00:00 2001 From: Ulrich Kunitz Date: Tue, 1 Aug 2006 23:43:30 +0200 Subject: [PATCH] zd1211rw: Fixes radiotap header There has been a problem in the radiotap header. Monitor mode works now with tcpdump 3.94 + libpcap 0.9.4. ethereal 0.99.0 + libpcap 0.9.4 is broken, because it doesn't find the right offset for the IEEE 802.11 header. Signed-off-by: Ulrich Kunitz Signed-off-by: John W. Linville --- drivers/net/wireless/zd1211rw/zd_mac.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/wireless/zd1211rw/zd_mac.c b/drivers/net/wireless/zd1211rw/zd_mac.c index 3bdc54d128d..b3943038ff8 100644 --- a/drivers/net/wireless/zd1211rw/zd_mac.c +++ b/drivers/net/wireless/zd1211rw/zd_mac.c @@ -713,10 +713,10 @@ static int zd_mac_tx(struct zd_mac *mac, struct ieee80211_txb *txb, int pri) struct zd_rt_hdr { struct ieee80211_radiotap_header rt_hdr; u8 rt_flags; + u8 rt_rate; u16 rt_channel; u16 rt_chbitmask; - u16 rt_rate; -}; +} __attribute__((packed)); static void fill_rt_header(void *buffer, struct zd_mac *mac, const struct ieee80211_rx_stats *stats, @@ -735,14 +735,14 @@ static void fill_rt_header(void *buffer, struct zd_mac *mac, if (status->decryption_type & (ZD_RX_WEP64|ZD_RX_WEP128|ZD_RX_WEP256)) hdr->rt_flags |= IEEE80211_RADIOTAP_F_WEP; + hdr->rt_rate = stats->rate / 5; + /* FIXME: 802.11a */ hdr->rt_channel = cpu_to_le16(ieee80211chan2mhz( _zd_chip_get_channel(&mac->chip))); hdr->rt_chbitmask = cpu_to_le16(IEEE80211_CHAN_2GHZ | ((status->frame_status & ZD_RX_FRAME_MODULATION_MASK) == ZD_RX_OFDM ? IEEE80211_CHAN_OFDM : IEEE80211_CHAN_CCK)); - - hdr->rt_rate = stats->rate / 5; } /* Returns 1 if the data packet is for us and 0 otherwise. */ -- cgit v1.2.3-70-g09d2 From 71eae25ece9ee6bc2fe9500c9c06bfbb46c55fb2 Mon Sep 17 00:00:00 2001 From: Daniel Drake Date: Tue, 1 Aug 2006 23:43:31 +0200 Subject: [PATCH] zd1211rw: Pass more management frame types up to host We'll be needing these at some point... Signed-off-by: Daniel Drake Signed-off-by: Ulrich Kunitz Signed-off-by: John W. Linville --- drivers/net/wireless/zd1211rw/zd_chip.h | 4 +++- drivers/net/wireless/zd1211rw/zd_mac.c | 6 ++++-- 2 files changed, 7 insertions(+), 3 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/wireless/zd1211rw/zd_chip.h b/drivers/net/wireless/zd1211rw/zd_chip.h index 805121093ab..0eb9c8facbd 100644 --- a/drivers/net/wireless/zd1211rw/zd_chip.h +++ b/drivers/net/wireless/zd1211rw/zd_chip.h @@ -461,10 +461,12 @@ #define CR_RX_FILTER CTL_REG(0x068c) #define RX_FILTER_ASSOC_RESPONSE 0x0002 +#define RX_FILTER_REASSOC_RESPONSE 0x0008 #define RX_FILTER_PROBE_RESPONSE 0x0020 #define RX_FILTER_BEACON 0x0100 +#define RX_FILTER_DISASSOC 0x0400 #define RX_FILTER_AUTH 0x0800 -/* Sniff modus sets filter to 0xfffff */ +/* Monitor mode sets filter to 0xfffff */ #define CR_ACK_TIMEOUT_EXT CTL_REG(0x0690) #define CR_BCN_FIFO_SEMAPHORE CTL_REG(0x0694) diff --git a/drivers/net/wireless/zd1211rw/zd_mac.c b/drivers/net/wireless/zd1211rw/zd_mac.c index b3943038ff8..1cf1fdab3c0 100644 --- a/drivers/net/wireless/zd1211rw/zd_mac.c +++ b/drivers/net/wireless/zd1211rw/zd_mac.c @@ -136,8 +136,10 @@ static int reset_mode(struct zd_mac *mac) { struct ieee80211_device *ieee = zd_mac_to_ieee80211(mac); struct zd_ioreq32 ioreqs[3] = { - { CR_RX_FILTER, RX_FILTER_BEACON|RX_FILTER_PROBE_RESPONSE| - RX_FILTER_AUTH|RX_FILTER_ASSOC_RESPONSE }, + { CR_RX_FILTER, RX_FILTER_BEACON | RX_FILTER_PROBE_RESPONSE | + RX_FILTER_AUTH | RX_FILTER_ASSOC_RESPONSE | + RX_FILTER_REASSOC_RESPONSE | + RX_FILTER_DISASSOC }, { CR_SNIFFER_ON, 0U }, { CR_ENCRYPTION_TYPE, NO_WEP }, }; -- cgit v1.2.3-70-g09d2 From 40da08bca6f4e7dec4a75c3c47800e5f4ca4e567 Mon Sep 17 00:00:00 2001 From: Daniel Drake Date: Tue, 1 Aug 2006 23:43:32 +0200 Subject: [PATCH] zd1211rw: Fix software encryption/decryption Apparently the ZD1211 doesn't mind, but the ZD1211B absolutely must be told that encryption is happening in software. Signed-off-by: Daniel Drake Signed-off-by: Ulrich Kunitz Signed-off-by: John W. Linville --- drivers/net/wireless/zd1211rw/zd_mac.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/wireless/zd1211rw/zd_mac.c b/drivers/net/wireless/zd1211rw/zd_mac.c index 1cf1fdab3c0..a66625c4348 100644 --- a/drivers/net/wireless/zd1211rw/zd_mac.c +++ b/drivers/net/wireless/zd1211rw/zd_mac.c @@ -108,7 +108,9 @@ int zd_mac_init_hw(struct zd_mac *mac, u8 device_type) if (r) goto disable_int; - r = zd_set_encryption_type(chip, NO_WEP); + /* We must inform the device that we are doing encryption/decryption in + * software at the moment. */ + r = zd_set_encryption_type(chip, ENC_SNIFFER); if (r) goto disable_int; @@ -141,7 +143,6 @@ static int reset_mode(struct zd_mac *mac) RX_FILTER_REASSOC_RESPONSE | RX_FILTER_DISASSOC }, { CR_SNIFFER_ON, 0U }, - { CR_ENCRYPTION_TYPE, NO_WEP }, }; if (ieee->iw_mode == IW_MODE_MONITOR) { -- cgit v1.2.3-70-g09d2 From b1162b639cc13d5a1ab9bcbd0a502599ddf49f86 Mon Sep 17 00:00:00 2001 From: Daniel Drake Date: Tue, 1 Aug 2006 23:43:33 +0200 Subject: [PATCH] zd1211rw: Remove bogus assert This function is never called in interrupt context, and it doesn't matter if it is called in IRQ context or not. Signed-off-by: Daniel Drake Signed-off-by: Ulrich Kunitz Signed-off-by: John W. Linville --- drivers/net/wireless/zd1211rw/zd_usb.c | 1 - 1 file changed, 1 deletion(-) (limited to 'drivers/net') diff --git a/drivers/net/wireless/zd1211rw/zd_usb.c b/drivers/net/wireless/zd1211rw/zd_usb.c index 72f90525bf6..f9a93f6abe8 100644 --- a/drivers/net/wireless/zd1211rw/zd_usb.c +++ b/drivers/net/wireless/zd1211rw/zd_usb.c @@ -323,7 +323,6 @@ static void disable_read_regs_int(struct zd_usb *usb) { struct zd_usb_interrupt *intr = &usb->intr; - ZD_ASSERT(in_interrupt()); spin_lock(&intr->lock); intr->read_regs_enabled = 0; spin_unlock(&intr->lock); -- cgit v1.2.3-70-g09d2 From b269825b9bb2c925bbaf4365ec9fa4c6a16e46b4 Mon Sep 17 00:00:00 2001 From: Ulrich Kunitz Date: Tue, 1 Aug 2006 23:43:34 +0200 Subject: [PATCH] zd1211rw: Fixed endianess issue with length info tag detection Discovered a problem while accessing www.python.org on my PPC32. The problem was pretty consistent for all sticks. The reason was that while testing for the length info tag, I ignored the endianess of the host system. Please recognize that converting the constant to little endian, we create faster code. Signed-off-by: Ulrich Kunitz Signed-off-by: John W. Linville --- drivers/net/wireless/zd1211rw/zd_usb.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/wireless/zd1211rw/zd_usb.c b/drivers/net/wireless/zd1211rw/zd_usb.c index f9a93f6abe8..6320984126c 100644 --- a/drivers/net/wireless/zd1211rw/zd_usb.c +++ b/drivers/net/wireless/zd1211rw/zd_usb.c @@ -544,11 +544,11 @@ static void handle_rx_packet(struct zd_usb *usb, const u8 *buffer, * be padded. Unaligned access might also happen if the length_info * structure is not present. */ - if (get_unaligned(&length_info->tag) == RX_LENGTH_INFO_TAG) { + if (get_unaligned(&length_info->tag) == cpu_to_le16(RX_LENGTH_INFO_TAG)) + { unsigned int l, k, n; for (i = 0, l = 0;; i++) { - k = le16_to_cpu(get_unaligned( - &length_info->length[i])); + k = le16_to_cpu(get_unaligned(&length_info->length[i])); n = l+k; if (n > length) return; -- cgit v1.2.3-70-g09d2 From fde627b54ce7bef094157074f3adb9b6e1a96d4c Mon Sep 17 00:00:00 2001 From: Ulrich Kunitz Date: Tue, 1 Aug 2006 23:43:35 +0200 Subject: [PATCH] zd1211rw: Packet filter fix for managed (STA) mode I had problems with my AVM Fritz!Box access point. It appeared that the AP deauthorized me and the softmac didn't reconnect me. This patch handles the problem. Signed-off-by: Ulrich Kunitz Signed-off-by: John W. Linville --- drivers/net/wireless/zd1211rw/zd_chip.c | 4 ++-- drivers/net/wireless/zd1211rw/zd_chip.h | 6 +++--- drivers/net/wireless/zd1211rw/zd_mac.c | 5 +---- 3 files changed, 6 insertions(+), 9 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/wireless/zd1211rw/zd_chip.c b/drivers/net/wireless/zd1211rw/zd_chip.c index efc9c4bd826..da9d06bdb81 100644 --- a/drivers/net/wireless/zd1211rw/zd_chip.c +++ b/drivers/net/wireless/zd1211rw/zd_chip.c @@ -797,7 +797,7 @@ static int zd1211_hw_init_hmac(struct zd_chip *chip) { CR_ADDA_MBIAS_WARMTIME, 0x30000808 }, { CR_ZD1211_RETRY_MAX, 0x2 }, { CR_SNIFFER_ON, 0 }, - { CR_RX_FILTER, AP_RX_FILTER }, + { CR_RX_FILTER, STA_RX_FILTER }, { CR_GROUP_HASH_P1, 0x00 }, { CR_GROUP_HASH_P2, 0x80000000 }, { CR_REG1, 0xa4 }, @@ -844,7 +844,7 @@ static int zd1211b_hw_init_hmac(struct zd_chip *chip) { CR_ZD1211B_AIFS_CTL2, 0x008C003C }, { CR_ZD1211B_TXOP, 0x01800824 }, { CR_SNIFFER_ON, 0 }, - { CR_RX_FILTER, AP_RX_FILTER }, + { CR_RX_FILTER, STA_RX_FILTER }, { CR_GROUP_HASH_P1, 0x00 }, { CR_GROUP_HASH_P2, 0x80000000 }, { CR_REG1, 0xa4 }, diff --git a/drivers/net/wireless/zd1211rw/zd_chip.h b/drivers/net/wireless/zd1211rw/zd_chip.h index 0eb9c8facbd..069d2b46733 100644 --- a/drivers/net/wireless/zd1211rw/zd_chip.h +++ b/drivers/net/wireless/zd1211rw/zd_chip.h @@ -466,6 +466,9 @@ #define RX_FILTER_BEACON 0x0100 #define RX_FILTER_DISASSOC 0x0400 #define RX_FILTER_AUTH 0x0800 +#define AP_RX_FILTER 0x0400feff +#define STA_RX_FILTER 0x0000ffff + /* Monitor mode sets filter to 0xfffff */ #define CR_ACK_TIMEOUT_EXT CTL_REG(0x0690) @@ -548,9 +551,6 @@ #define CR_ZD1211B_TXOP CTL_REG(0x0b20) #define CR_ZD1211B_RETRY_MAX CTL_REG(0x0b28) -#define AP_RX_FILTER 0x0400feff -#define STA_RX_FILTER 0x0000ffff - #define CWIN_SIZE 0x007f043f diff --git a/drivers/net/wireless/zd1211rw/zd_mac.c b/drivers/net/wireless/zd1211rw/zd_mac.c index a66625c4348..d6f3e02a0b5 100644 --- a/drivers/net/wireless/zd1211rw/zd_mac.c +++ b/drivers/net/wireless/zd1211rw/zd_mac.c @@ -138,10 +138,7 @@ static int reset_mode(struct zd_mac *mac) { struct ieee80211_device *ieee = zd_mac_to_ieee80211(mac); struct zd_ioreq32 ioreqs[3] = { - { CR_RX_FILTER, RX_FILTER_BEACON | RX_FILTER_PROBE_RESPONSE | - RX_FILTER_AUTH | RX_FILTER_ASSOC_RESPONSE | - RX_FILTER_REASSOC_RESPONSE | - RX_FILTER_DISASSOC }, + { CR_RX_FILTER, STA_RX_FILTER }, { CR_SNIFFER_ON, 0U }, }; -- cgit v1.2.3-70-g09d2 From 9cac2c35e26cc44978df654306bb92d7cfe7e2de Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Sun, 30 Jul 2006 20:20:54 -0700 Subject: [ATALK]: Make CONFIG_DEV_APPLETALK a tristate. MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Otherwise we allow building appletalk drivers in-kernel when CONFIG_ATALK is modular. That doesn't work because these drivers use symbols such as "alloc_talkdev" which is exported from code built by CONFIG_ATALK. Noticed by Toralf Förster. Signed-off-by: David S. Miller --- drivers/net/appletalk/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/net') diff --git a/drivers/net/appletalk/Kconfig b/drivers/net/appletalk/Kconfig index b14e89004c3..0a0e0cd81a2 100644 --- a/drivers/net/appletalk/Kconfig +++ b/drivers/net/appletalk/Kconfig @@ -29,7 +29,7 @@ config ATALK even politically correct people are allowed to say Y here. config DEV_APPLETALK - bool "Appletalk interfaces support" + tristate "Appletalk interfaces support" depends on ATALK help AppleTalk is the protocol that Apple computers can use to communicate -- cgit v1.2.3-70-g09d2 From a20e9c6291f27cac4a9ab450d124794c012f87d4 Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Mon, 31 Jul 2006 22:38:16 -0700 Subject: [TG3]: Convert to netdev_alloc_skb Signed-off-by: David S. Miller --- drivers/net/tg3.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/tg3.c b/drivers/net/tg3.c index 1b8138f641e..6f97962dd06 100644 --- a/drivers/net/tg3.c +++ b/drivers/net/tg3.c @@ -68,8 +68,8 @@ #define DRV_MODULE_NAME "tg3" #define PFX DRV_MODULE_NAME ": " -#define DRV_MODULE_VERSION "3.63" -#define DRV_MODULE_RELDATE "July 25, 2006" +#define DRV_MODULE_VERSION "3.64" +#define DRV_MODULE_RELDATE "July 31, 2006" #define TG3_DEF_MAC_MODE 0 #define TG3_DEF_RX_MODE 0 @@ -3097,7 +3097,7 @@ static int tg3_alloc_rx_skb(struct tg3 *tp, u32 opaque_key, * Callers depend upon this behavior and assume that * we leave everything unchanged if we fail. */ - skb = dev_alloc_skb(skb_size); + skb = netdev_alloc_skb(tp->dev, skb_size); if (skb == NULL) return -ENOMEM; @@ -3270,7 +3270,7 @@ static int tg3_rx(struct tg3 *tp, int budget) tg3_recycle_rx(tp, opaque_key, desc_idx, *post_ptr); - copy_skb = dev_alloc_skb(len + 2); + copy_skb = netdev_alloc_skb(tp->dev, len + 2); if (copy_skb == NULL) goto drop_it_no_recycle; @@ -8618,7 +8618,7 @@ static int tg3_run_loopback(struct tg3 *tp, int loopback_mode) err = -EIO; tx_len = 1514; - skb = dev_alloc_skb(tx_len); + skb = netdev_alloc_skb(tp->dev, tx_len); if (!skb) return -ENOMEM; -- cgit v1.2.3-70-g09d2 From 87f5032e0ca149bd03f0e2b46071b0c4a2312e82 Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Mon, 31 Jul 2006 22:39:40 -0700 Subject: [E1000]: Convert to netdev_alloc_skb Signed-off-by: David S. Miller --- drivers/net/e1000/e1000_main.c | 11 ++++++----- 1 file changed, 6 insertions(+), 5 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/e1000/e1000_main.c b/drivers/net/e1000/e1000_main.c index da62db89742..627f224d78b 100644 --- a/drivers/net/e1000/e1000_main.c +++ b/drivers/net/e1000/e1000_main.c @@ -3127,7 +3127,7 @@ e1000_change_mtu(struct net_device *netdev, int new_mtu) break; } - /* NOTE: dev_alloc_skb reserves 16 bytes, and typically NET_IP_ALIGN + /* NOTE: netdev_alloc_skb reserves 16 bytes, and typically NET_IP_ALIGN * means we reserve 2 more, this pushes us to allocate from the next * larger slab size * i.e. RXBUFFER_2048 --> size-4096 slab */ @@ -3708,7 +3708,7 @@ e1000_clean_rx_irq(struct e1000_adapter *adapter, #define E1000_CB_LENGTH 256 if (length < E1000_CB_LENGTH) { struct sk_buff *new_skb = - dev_alloc_skb(length + NET_IP_ALIGN); + netdev_alloc_skb(netdev, length + NET_IP_ALIGN); if (new_skb) { skb_reserve(new_skb, NET_IP_ALIGN); new_skb->dev = netdev; @@ -3979,7 +3979,7 @@ e1000_alloc_rx_buffers(struct e1000_adapter *adapter, while (cleaned_count--) { if (!(skb = buffer_info->skb)) - skb = dev_alloc_skb(bufsz); + skb = netdev_alloc_skb(netdev, bufsz); else { skb_trim(skb, 0); goto map_skb; @@ -3997,7 +3997,7 @@ e1000_alloc_rx_buffers(struct e1000_adapter *adapter, DPRINTK(RX_ERR, ERR, "skb align check failed: %u bytes " "at %p\n", bufsz, skb->data); /* Try again, without freeing the previous */ - skb = dev_alloc_skb(bufsz); + skb = netdev_alloc_skb(netdev, bufsz); /* Failed allocation, critical failure */ if (!skb) { dev_kfree_skb(oldskb); @@ -4121,7 +4121,8 @@ e1000_alloc_rx_buffers_ps(struct e1000_adapter *adapter, rx_desc->read.buffer_addr[j+1] = ~0; } - skb = dev_alloc_skb(adapter->rx_ps_bsize0 + NET_IP_ALIGN); + skb = netdev_alloc_skb(netdev, + adapter->rx_ps_bsize0 + NET_IP_ALIGN); if (unlikely(!skb)) { adapter->alloc_rx_buff_failed++; -- cgit v1.2.3-70-g09d2 From b41477f32a5aaf39a77741c0138b16f16a636c70 Mon Sep 17 00:00:00 2001 From: Ananda Raju Date: Mon, 24 Jul 2006 19:52:49 -0400 Subject: [PATCH] s2io driver bug fixes #1 This patch contains some of the bug fixes and enhancements done to s2io driver. Following are the brief description of changes 1. Introduced macro "S2IO_PARM_INT" for declaring integer load parameter 2. UDP_RR test failure, memset txdl after Tx completion 3. PXE boot may leave adapter in unknown state so do reset in probe. 4. Add Tx completion code in netpoll 5. In s2io_vpd_read() move array vpd_data[] to pointer, saves stack memory 6. Fix bug in ethtool online test Signed-off-by: Ananda Raju Signed-off-by: Jeff Garzik --- drivers/net/s2io.c | 158 +++++++++++++++++++++++++++-------------------------- drivers/net/s2io.h | 5 ++ 2 files changed, 85 insertions(+), 78 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/s2io.c b/drivers/net/s2io.c index e1fe3a0a7b0..4a4e38be80a 100644 --- a/drivers/net/s2io.c +++ b/drivers/net/s2io.c @@ -370,38 +370,50 @@ static const u64 fix_mac[] = { END_SIGN }; +MODULE_AUTHOR("Raghavendra Koushik "); +MODULE_LICENSE("GPL"); +MODULE_VERSION(DRV_VERSION); + + /* Module Loadable parameters. */ -static unsigned int tx_fifo_num = 1; -static unsigned int tx_fifo_len[MAX_TX_FIFOS] = - {DEFAULT_FIFO_0_LEN, [1 ...(MAX_TX_FIFOS - 1)] = DEFAULT_FIFO_1_7_LEN}; -static unsigned int rx_ring_num = 1; -static unsigned int rx_ring_sz[MAX_RX_RINGS] = - {[0 ...(MAX_RX_RINGS - 1)] = SMALL_BLK_CNT}; -static unsigned int rts_frm_len[MAX_RX_RINGS] = - {[0 ...(MAX_RX_RINGS - 1)] = 0 }; -static unsigned int rx_ring_mode = 1; -static unsigned int use_continuous_tx_intrs = 1; -static unsigned int rmac_pause_time = 0x100; -static unsigned int mc_pause_threshold_q0q3 = 187; -static unsigned int mc_pause_threshold_q4q7 = 187; -static unsigned int shared_splits; -static unsigned int tmac_util_period = 5; -static unsigned int rmac_util_period = 5; -static unsigned int bimodal = 0; -static unsigned int l3l4hdr_size = 128; -#ifndef CONFIG_S2IO_NAPI -static unsigned int indicate_max_pkts; -#endif +S2IO_PARM_INT(tx_fifo_num, 1); +S2IO_PARM_INT(rx_ring_num, 1); + + +S2IO_PARM_INT(rx_ring_mode, 1); +S2IO_PARM_INT(use_continuous_tx_intrs, 1); +S2IO_PARM_INT(rmac_pause_time, 0x100); +S2IO_PARM_INT(mc_pause_threshold_q0q3, 187); +S2IO_PARM_INT(mc_pause_threshold_q4q7, 187); +S2IO_PARM_INT(shared_splits, 0); +S2IO_PARM_INT(tmac_util_period, 5); +S2IO_PARM_INT(rmac_util_period, 5); +S2IO_PARM_INT(bimodal, 0); +S2IO_PARM_INT(l3l4hdr_size, 128); /* Frequency of Rx desc syncs expressed as power of 2 */ -static unsigned int rxsync_frequency = 3; +S2IO_PARM_INT(rxsync_frequency, 3); /* Interrupt type. Values can be 0(INTA), 1(MSI), 2(MSI_X) */ -static unsigned int intr_type = 0; +S2IO_PARM_INT(intr_type, 0); /* Large receive offload feature */ -static unsigned int lro = 0; +S2IO_PARM_INT(lro, 0); /* Max pkts to be aggregated by LRO at one time. If not specified, * aggregation happens until we hit max IP pkt size(64K) */ -static unsigned int lro_max_pkts = 0xFFFF; +S2IO_PARM_INT(lro_max_pkts, 0xFFFF); +#ifndef CONFIG_S2IO_NAPI +S2IO_PARM_INT(indicate_max_pkts, 0); +#endif + +static unsigned int tx_fifo_len[MAX_TX_FIFOS] = + {DEFAULT_FIFO_0_LEN, [1 ...(MAX_TX_FIFOS - 1)] = DEFAULT_FIFO_1_7_LEN}; +static unsigned int rx_ring_sz[MAX_RX_RINGS] = + {[0 ...(MAX_RX_RINGS - 1)] = SMALL_BLK_CNT}; +static unsigned int rts_frm_len[MAX_RX_RINGS] = + {[0 ...(MAX_RX_RINGS - 1)] = 0 }; + +module_param_array(tx_fifo_len, uint, NULL, 0); +module_param_array(rx_ring_sz, uint, NULL, 0); +module_param_array(rts_frm_len, uint, NULL, 0); /* * S2IO device table. @@ -464,10 +476,9 @@ static int init_shared_mem(struct s2io_nic *nic) size += config->tx_cfg[i].fifo_len; } if (size > MAX_AVAILABLE_TXDS) { - DBG_PRINT(ERR_DBG, "%s: Requested TxDs too high, ", - __FUNCTION__); + DBG_PRINT(ERR_DBG, "s2io: Requested TxDs too high, "); DBG_PRINT(ERR_DBG, "Requested: %d, max supported: 8192\n", size); - return FAILURE; + return -EINVAL; } lst_size = (sizeof(TxD_t) * config->max_txds); @@ -547,6 +558,7 @@ static int init_shared_mem(struct s2io_nic *nic) nic->ufo_in_band_v = kmalloc((sizeof(u64) * size), GFP_KERNEL); if (!nic->ufo_in_band_v) return -ENOMEM; + memset(nic->ufo_in_band_v, 0, size); /* Allocation and initialization of RXDs in Rings */ size = 0; @@ -1213,7 +1225,7 @@ static int init_nic(struct s2io_nic *nic) break; } - /* Enable Tx FIFO partition 0. */ + /* Enable all configured Tx FIFO partitions */ val64 = readq(&bar0->tx_fifo_partition_0); val64 |= (TX_FIFO_PARTITION_EN); writeq(val64, &bar0->tx_fifo_partition_0); @@ -1650,7 +1662,7 @@ static void en_dis_able_nic_intrs(struct s2io_nic *nic, u16 mask, int flag) writeq(temp64, &bar0->general_int_mask); /* * If Hercules adapter enable GPIO otherwise - * disabled all PCIX, Flash, MDIO, IIC and GPIO + * disable all PCIX, Flash, MDIO, IIC and GPIO * interrupts for now. * TODO */ @@ -2119,7 +2131,7 @@ static struct sk_buff *s2io_txdl_getskb(fifo_info_t *fifo_data, TxD_t *txdlp, in frag->size, PCI_DMA_TODEVICE); } } - txdlp->Host_Control = 0; + memset(txdlp,0, (sizeof(TxD_t) * fifo_data->max_txds)); return(skb); } @@ -2614,23 +2626,23 @@ no_rx: } #endif +#ifdef CONFIG_NET_POLL_CONTROLLER /** - * s2io_netpoll - Rx interrupt service handler for netpoll support + * s2io_netpoll - netpoll event handler entry point * @dev : pointer to the device structure. * Description: - * Polling 'interrupt' - used by things like netconsole to send skbs - * without having to re-enable interrupts. It's not called while - * the interrupt routine is executing. + * This function will be called by upper layer to check for events on the + * interface in situations where interrupts are disabled. It is used for + * specific in-kernel networking tasks, such as remote consoles and kernel + * debugging over the network (example netdump in RedHat). */ - -#ifdef CONFIG_NET_POLL_CONTROLLER static void s2io_netpoll(struct net_device *dev) { nic_t *nic = dev->priv; mac_info_t *mac_control; struct config_param *config; XENA_dev_config_t __iomem *bar0 = nic->bar0; - u64 val64; + u64 val64 = 0xFFFFFFFFFFFFFFFFULL; int i; disable_irq(dev->irq); @@ -2639,9 +2651,17 @@ static void s2io_netpoll(struct net_device *dev) mac_control = &nic->mac_control; config = &nic->config; - val64 = readq(&bar0->rx_traffic_int); writeq(val64, &bar0->rx_traffic_int); + writeq(val64, &bar0->tx_traffic_int); + + /* we need to free up the transmitted skbufs or else netpoll will + * run out of skbs and will fail and eventually netpoll application such + * as netdump will fail. + */ + for (i = 0; i < config->tx_fifo_num; i++) + tx_intr_handler(&mac_control->fifos[i]); + /* check for received packet and indicate up to network */ for (i = 0; i < config->rx_ring_num; i++) rx_intr_handler(&mac_control->rings[i]); @@ -3327,7 +3347,7 @@ static void s2io_reset(nic_t * sp) /* Clear certain PCI/PCI-X fields after reset */ if (sp->device_type == XFRAME_II_DEVICE) { - /* Clear parity err detect bit */ + /* Clear "detected parity error" bit */ pci_write_config_word(sp->pdev, PCI_STATUS, 0x8000); /* Clearing PCIX Ecc status register */ @@ -4942,7 +4962,8 @@ static int write_eeprom(nic_t * sp, int off, u64 data, int cnt) } static void s2io_vpd_read(nic_t *nic) { - u8 vpd_data[256],data; + u8 *vpd_data; + u8 data; int i=0, cnt, fail = 0; int vpd_addr = 0x80; @@ -4955,6 +4976,10 @@ static void s2io_vpd_read(nic_t *nic) vpd_addr = 0x50; } + vpd_data = kmalloc(256, GFP_KERNEL); + if (!vpd_data) + return; + for (i = 0; i < 256; i +=4 ) { pci_write_config_byte(nic->pdev, (vpd_addr + 2), i); pci_read_config_byte(nic->pdev, (vpd_addr + 2), &data); @@ -4977,6 +5002,7 @@ static void s2io_vpd_read(nic_t *nic) memset(nic->product_name, 0, vpd_data[1]); memcpy(nic->product_name, &vpd_data[3], vpd_data[1]); } + kfree(vpd_data); } /** @@ -5295,7 +5321,7 @@ static int s2io_link_test(nic_t * sp, uint64_t * data) else *data = 0; - return 0; + return *data; } /** @@ -6337,7 +6363,7 @@ static int s2io_card_up(nic_t * sp) s2io_set_multicast(dev); if (sp->lro) { - /* Initialize max aggregatable pkts based on MTU */ + /* Initialize max aggregatable pkts per session based on MTU */ sp->lro_max_aggr_per_sess = ((1<<16) - 1) / dev->mtu; /* Check if we can use(if specified) user provided value */ if (lro_max_pkts < sp->lro_max_aggr_per_sess) @@ -6438,7 +6464,7 @@ static void s2io_tx_watchdog(struct net_device *dev) * @cksum : FCS checksum of the frame. * @ring_no : the ring from which this RxD was extracted. * Description: - * This function is called by the Tx interrupt serivce routine to perform + * This function is called by the Rx interrupt serivce routine to perform * some OS related operations on the SKB before passing it to the upper * layers. It mainly checks if the checksum is OK, if so adds it to the * SKBs cksum variable, increments the Rx packet count and passes the SKB @@ -6698,33 +6724,6 @@ static void s2io_init_pci(nic_t * sp) pci_read_config_word(sp->pdev, PCI_COMMAND, &pci_cmd); } -MODULE_AUTHOR("Raghavendra Koushik "); -MODULE_LICENSE("GPL"); -MODULE_VERSION(DRV_VERSION); - -module_param(tx_fifo_num, int, 0); -module_param(rx_ring_num, int, 0); -module_param(rx_ring_mode, int, 0); -module_param_array(tx_fifo_len, uint, NULL, 0); -module_param_array(rx_ring_sz, uint, NULL, 0); -module_param_array(rts_frm_len, uint, NULL, 0); -module_param(use_continuous_tx_intrs, int, 1); -module_param(rmac_pause_time, int, 0); -module_param(mc_pause_threshold_q0q3, int, 0); -module_param(mc_pause_threshold_q4q7, int, 0); -module_param(shared_splits, int, 0); -module_param(tmac_util_period, int, 0); -module_param(rmac_util_period, int, 0); -module_param(bimodal, bool, 0); -module_param(l3l4hdr_size, int , 0); -#ifndef CONFIG_S2IO_NAPI -module_param(indicate_max_pkts, int, 0); -#endif -module_param(rxsync_frequency, int, 0); -module_param(intr_type, int, 0); -module_param(lro, int, 0); -module_param(lro_max_pkts, int, 0); - static int s2io_verify_parm(struct pci_dev *pdev, u8 *dev_intr_type) { if ( tx_fifo_num > 8) { @@ -6832,8 +6831,8 @@ s2io_init_nic(struct pci_dev *pdev, const struct pci_device_id *pre) } if (dev_intr_type != MSI_X) { if (pci_request_regions(pdev, s2io_driver_name)) { - DBG_PRINT(ERR_DBG, "Request Regions failed\n"), - pci_disable_device(pdev); + DBG_PRINT(ERR_DBG, "Request Regions failed\n"); + pci_disable_device(pdev); return -ENODEV; } } @@ -6957,7 +6956,7 @@ s2io_init_nic(struct pci_dev *pdev, const struct pci_device_id *pre) /* initialize the shared memory used by the NIC and the host */ if (init_shared_mem(sp)) { DBG_PRINT(ERR_DBG, "%s: Memory allocation failed\n", - __FUNCTION__); + dev->name); ret = -ENOMEM; goto mem_alloc_failed; } @@ -7094,6 +7093,9 @@ s2io_init_nic(struct pci_dev *pdev, const struct pci_device_id *pre) dev->addr_len = ETH_ALEN; memcpy(dev->dev_addr, sp->def_mac_addr, ETH_ALEN); + /* reset Nic and bring it to known state */ + s2io_reset(sp); + /* * Initialize the tasklet status and link state flags * and the card state parameter @@ -7131,11 +7133,11 @@ s2io_init_nic(struct pci_dev *pdev, const struct pci_device_id *pre) goto register_failed; } s2io_vpd_read(sp); - DBG_PRINT(ERR_DBG, "%s: Neterion %s",dev->name, sp->product_name); - DBG_PRINT(ERR_DBG, "(rev %d), Driver version %s\n", - get_xena_rev_id(sp->pdev), - s2io_driver_version); DBG_PRINT(ERR_DBG, "Copyright(c) 2002-2005 Neterion Inc.\n"); + DBG_PRINT(ERR_DBG, "%s: Neterion %s (rev %d)\n",dev->name, + sp->product_name, get_xena_rev_id(sp->pdev)); + DBG_PRINT(ERR_DBG, "%s: Driver version %s\n", dev->name, + s2io_driver_version); DBG_PRINT(ERR_DBG, "%s: MAC ADDR: " "%02x:%02x:%02x:%02x:%02x:%02x\n", dev->name, sp->def_mac_addr[0].mac_addr[0], diff --git a/drivers/net/s2io.h b/drivers/net/s2io.h index 217097bc22f..1654f71a9af 100644 --- a/drivers/net/s2io.h +++ b/drivers/net/s2io.h @@ -1011,4 +1011,9 @@ static void clear_lro_session(lro_t *lro); static void queue_rx_frame(struct sk_buff *skb); static void update_L3L4_header(nic_t *sp, lro_t *lro); static void lro_append_pkt(nic_t *sp, lro_t *lro, struct sk_buff *skb, u32 tcp_len); + +#define S2IO_PARM_INT(X, def_val) \ + static unsigned int X = def_val;\ + module_param(X , uint, 0); + #endif /* _S2IO_H */ -- cgit v1.2.3-70-g09d2 From 75c30b1368faaa9c740536b91a15a33aab62f30b Mon Sep 17 00:00:00 2001 From: Ananda Raju Date: Mon, 24 Jul 2006 19:55:09 -0400 Subject: [PATCH] s2io driver bug fixes #2 This patch contains some of the bug fixes and enhancements done to s2io driver. Following are the brief description of changes 1. code cleanup to handle gso modification better 2. Move repeated code in rx path, to a common function s2io_chk_rx_buffers() 3. Bug fix in MSI interrupt 4. clear statistics when card is down 5. Avoid linked list traversing in lro aggregation. 6. Use pci_dma_sync_single_for_cpu for buffer0 in case of 2/3 buffer mode. 7. ethtool tso get/set functions to set clear NETIF_F_TSO6 8. Stop LRO aggregation when we receive ECN notification Signed-off-by: Ananda Raju Signed-off-by: Jeff Garzik --- drivers/net/s2io.c | 228 ++++++++++++++++++++++------------------------------- drivers/net/s2io.h | 5 ++ 2 files changed, 98 insertions(+), 135 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/s2io.c b/drivers/net/s2io.c index 4a4e38be80a..132ed32bce1 100644 --- a/drivers/net/s2io.c +++ b/drivers/net/s2io.c @@ -76,7 +76,7 @@ #include "s2io.h" #include "s2io-regs.h" -#define DRV_VERSION "2.0.14.2" +#define DRV_VERSION "2.0.15.2" /* S2io Driver name & version. */ static char s2io_driver_name[] = "Neterion"; @@ -2383,9 +2383,14 @@ static int fill_rx_buffers(struct s2io_nic *nic, int ring_no) skb->data = (void *) (unsigned long)tmp; skb->tail = (void *) (unsigned long)tmp; - ((RxD3_t*)rxdp)->Buffer0_ptr = - pci_map_single(nic->pdev, ba->ba_0, BUF0_LEN, + if (!(((RxD3_t*)rxdp)->Buffer0_ptr)) + ((RxD3_t*)rxdp)->Buffer0_ptr = + pci_map_single(nic->pdev, ba->ba_0, BUF0_LEN, PCI_DMA_FROMDEVICE); + else + pci_dma_sync_single_for_device(nic->pdev, + (dma_addr_t) ((RxD3_t*)rxdp)->Buffer0_ptr, + BUF0_LEN, PCI_DMA_FROMDEVICE); rxdp->Control_2 = SET_BUFFER0_SIZE_3(BUF0_LEN); if (nic->rxd_mode == RXD_MODE_3B) { /* Two buffer mode */ @@ -2398,10 +2403,13 @@ static int fill_rx_buffers(struct s2io_nic *nic, int ring_no) (nic->pdev, skb->data, dev->mtu + 4, PCI_DMA_FROMDEVICE); - /* Buffer-1 will be dummy buffer not used */ - ((RxD3_t*)rxdp)->Buffer1_ptr = - pci_map_single(nic->pdev, ba->ba_1, BUF1_LEN, - PCI_DMA_FROMDEVICE); + /* Buffer-1 will be dummy buffer. Not used */ + if (!(((RxD3_t*)rxdp)->Buffer1_ptr)) { + ((RxD3_t*)rxdp)->Buffer1_ptr = + pci_map_single(nic->pdev, + ba->ba_1, BUF1_LEN, + PCI_DMA_FROMDEVICE); + } rxdp->Control_2 |= SET_BUFFER1_SIZE_3(1); rxdp->Control_2 |= SET_BUFFER2_SIZE_3 (dev->mtu + 4); @@ -2728,7 +2736,7 @@ static void rx_intr_handler(ring_info_t *ring_data) /* If your are next to put index then it's FIFO full condition */ if ((get_block == put_block) && (get_info.offset + 1) == put_info.offset) { - DBG_PRINT(ERR_DBG, "%s: Ring Full\n",dev->name); + DBG_PRINT(INTR_DBG, "%s: Ring Full\n",dev->name); break; } skb = (struct sk_buff *) ((unsigned long)rxdp->Host_Control); @@ -2748,18 +2756,15 @@ static void rx_intr_handler(ring_info_t *ring_data) HEADER_SNAP_SIZE, PCI_DMA_FROMDEVICE); } else if (nic->rxd_mode == RXD_MODE_3B) { - pci_unmap_single(nic->pdev, (dma_addr_t) + pci_dma_sync_single_for_cpu(nic->pdev, (dma_addr_t) ((RxD3_t*)rxdp)->Buffer0_ptr, BUF0_LEN, PCI_DMA_FROMDEVICE); - pci_unmap_single(nic->pdev, (dma_addr_t) - ((RxD3_t*)rxdp)->Buffer1_ptr, - BUF1_LEN, PCI_DMA_FROMDEVICE); pci_unmap_single(nic->pdev, (dma_addr_t) ((RxD3_t*)rxdp)->Buffer2_ptr, dev->mtu + 4, PCI_DMA_FROMDEVICE); } else { - pci_unmap_single(nic->pdev, (dma_addr_t) + pci_dma_sync_single_for_cpu(nic->pdev, (dma_addr_t) ((RxD3_t*)rxdp)->Buffer0_ptr, BUF0_LEN, PCI_DMA_FROMDEVICE); pci_unmap_single(nic->pdev, (dma_addr_t) @@ -3548,7 +3553,7 @@ static void restore_xmsi_data(nic_t *nic) u64 val64; int i; - for (i=0; i< nic->avail_msix_vectors; i++) { + for (i=0; i < MAX_REQUESTED_MSI_X; i++) { writeq(nic->msix_info[i].addr, &bar0->xmsi_address); writeq(nic->msix_info[i].data, &bar0->xmsi_data); val64 = (BIT(7) | BIT(15) | vBIT(i, 26, 6)); @@ -3567,7 +3572,7 @@ static void store_xmsi_data(nic_t *nic) int i; /* Store and display */ - for (i=0; i< nic->avail_msix_vectors; i++) { + for (i=0; i < MAX_REQUESTED_MSI_X; i++) { val64 = (BIT(15) | vBIT(i, 26, 6)); writeq(val64, &bar0->xmsi_access); if (wait_for_msix_trans(nic, i)) { @@ -3828,13 +3833,11 @@ static int s2io_xmit(struct sk_buff *skb, struct net_device *dev) TxD_t *txdp; TxFIFO_element_t __iomem *tx_fifo; unsigned long flags; -#ifdef NETIF_F_TSO - int mss; -#endif u16 vlan_tag = 0; int vlan_priority = 0; mac_info_t *mac_control; struct config_param *config; + int offload_type; mac_control = &sp->mac_control; config = &sp->config; @@ -3882,13 +3885,11 @@ static int s2io_xmit(struct sk_buff *skb, struct net_device *dev) return 0; } - txdp->Control_1 = 0; - txdp->Control_2 = 0; + offload_type = s2io_offload_type(skb); #ifdef NETIF_F_TSO - mss = skb_shinfo(skb)->gso_size; - if (skb_shinfo(skb)->gso_type & (SKB_GSO_TCPV4 | SKB_GSO_TCPV6)) { + if (offload_type & (SKB_GSO_TCPV4 | SKB_GSO_TCPV6)) { txdp->Control_1 |= TXD_TCP_LSO_EN; - txdp->Control_1 |= TXD_TCP_LSO_MSS(mss); + txdp->Control_1 |= TXD_TCP_LSO_MSS(s2io_tcp_mss(skb)); } #endif if (skb->ip_summed == CHECKSUM_HW) { @@ -3906,10 +3907,10 @@ static int s2io_xmit(struct sk_buff *skb, struct net_device *dev) } frg_len = skb->len - skb->data_len; - if (skb_shinfo(skb)->gso_type == SKB_GSO_UDP) { + if (offload_type == SKB_GSO_UDP) { int ufo_size; - ufo_size = skb_shinfo(skb)->gso_size; + ufo_size = s2io_udp_mss(skb); ufo_size &= ~7; txdp->Control_1 |= TXD_UFO_EN; txdp->Control_1 |= TXD_UFO_MSS(ufo_size); @@ -3926,16 +3927,13 @@ static int s2io_xmit(struct sk_buff *skb, struct net_device *dev) sp->ufo_in_band_v, sizeof(u64), PCI_DMA_TODEVICE); txdp++; - txdp->Control_1 = 0; - txdp->Control_2 = 0; } txdp->Buffer_Pointer = pci_map_single (sp->pdev, skb->data, frg_len, PCI_DMA_TODEVICE); txdp->Host_Control = (unsigned long) skb; txdp->Control_1 |= TXD_BUFFER0_SIZE(frg_len); - - if (skb_shinfo(skb)->gso_type == SKB_GSO_UDP) + if (offload_type == SKB_GSO_UDP) txdp->Control_1 |= TXD_UFO_EN; frg_cnt = skb_shinfo(skb)->nr_frags; @@ -3950,12 +3948,12 @@ static int s2io_xmit(struct sk_buff *skb, struct net_device *dev) (sp->pdev, frag->page, frag->page_offset, frag->size, PCI_DMA_TODEVICE); txdp->Control_1 = TXD_BUFFER0_SIZE(frag->size); - if (skb_shinfo(skb)->gso_type == SKB_GSO_UDP) + if (offload_type == SKB_GSO_UDP) txdp->Control_1 |= TXD_UFO_EN; } txdp->Control_1 |= TXD_GATHER_CODE_LAST; - if (skb_shinfo(skb)->gso_type == SKB_GSO_UDP) + if (offload_type == SKB_GSO_UDP) frg_cnt++; /* as Txd0 was used for inband header */ tx_fifo = mac_control->tx_FIFO_start[queue]; @@ -3964,13 +3962,9 @@ static int s2io_xmit(struct sk_buff *skb, struct net_device *dev) val64 = (TX_FIFO_LAST_TXD_NUM(frg_cnt) | TX_FIFO_FIRST_LIST | TX_FIFO_LAST_LIST); - -#ifdef NETIF_F_TSO - if (mss) - val64 |= TX_FIFO_SPECIAL_FUNC; -#endif - if (skb_shinfo(skb)->gso_type == SKB_GSO_UDP) + if (offload_type) val64 |= TX_FIFO_SPECIAL_FUNC; + writeq(val64, &tx_fifo->List_Control); mmiowb(); @@ -4004,13 +3998,41 @@ s2io_alarm_handle(unsigned long data) mod_timer(&sp->alarm_timer, jiffies + HZ / 2); } +static int s2io_chk_rx_buffers(nic_t *sp, int rng_n) +{ + int rxb_size, level; + + if (!sp->lro) { + rxb_size = atomic_read(&sp->rx_bufs_left[rng_n]); + level = rx_buffer_level(sp, rxb_size, rng_n); + + if ((level == PANIC) && (!TASKLET_IN_USE)) { + int ret; + DBG_PRINT(INTR_DBG, "%s: Rx BD hit ", __FUNCTION__); + DBG_PRINT(INTR_DBG, "PANIC levels\n"); + if ((ret = fill_rx_buffers(sp, rng_n)) == -ENOMEM) { + DBG_PRINT(ERR_DBG, "Out of memory in %s", + __FUNCTION__); + clear_bit(0, (&sp->tasklet_status)); + return -1; + } + clear_bit(0, (&sp->tasklet_status)); + } else if (level == LOW) + tasklet_schedule(&sp->task); + + } else if (fill_rx_buffers(sp, rng_n) == -ENOMEM) { + DBG_PRINT(ERR_DBG, "%s:Out of memory", sp->dev->name); + DBG_PRINT(ERR_DBG, " in Rx Intr!!\n"); + } + return 0; +} + static irqreturn_t s2io_msi_handle(int irq, void *dev_id, struct pt_regs *regs) { struct net_device *dev = (struct net_device *) dev_id; nic_t *sp = dev->priv; int i; - int ret; mac_info_t *mac_control; struct config_param *config; @@ -4032,35 +4054,8 @@ s2io_msi_handle(int irq, void *dev_id, struct pt_regs *regs) * reallocate the buffers from the interrupt handler itself, * else schedule a tasklet to reallocate the buffers. */ - for (i = 0; i < config->rx_ring_num; i++) { - if (!sp->lro) { - int rxb_size = atomic_read(&sp->rx_bufs_left[i]); - int level = rx_buffer_level(sp, rxb_size, i); - - if ((level == PANIC) && (!TASKLET_IN_USE)) { - DBG_PRINT(INTR_DBG, "%s: Rx BD hit ", - dev->name); - DBG_PRINT(INTR_DBG, "PANIC levels\n"); - if ((ret = fill_rx_buffers(sp, i)) == -ENOMEM) { - DBG_PRINT(ERR_DBG, "%s:Out of memory", - dev->name); - DBG_PRINT(ERR_DBG, " in ISR!!\n"); - clear_bit(0, (&sp->tasklet_status)); - atomic_dec(&sp->isr_cnt); - return IRQ_HANDLED; - } - clear_bit(0, (&sp->tasklet_status)); - } else if (level == LOW) { - tasklet_schedule(&sp->task); - } - } - else if (fill_rx_buffers(sp, i) == -ENOMEM) { - DBG_PRINT(ERR_DBG, "%s:Out of memory", - dev->name); - DBG_PRINT(ERR_DBG, " in Rx Intr!!\n"); - break; - } - } + for (i = 0; i < config->rx_ring_num; i++) + s2io_chk_rx_buffers(sp, i); atomic_dec(&sp->isr_cnt); return IRQ_HANDLED; @@ -4071,39 +4066,13 @@ s2io_msix_ring_handle(int irq, void *dev_id, struct pt_regs *regs) { ring_info_t *ring = (ring_info_t *)dev_id; nic_t *sp = ring->nic; - struct net_device *dev = (struct net_device *) dev_id; - int rxb_size, level, rng_n; atomic_inc(&sp->isr_cnt); - rx_intr_handler(ring); - rng_n = ring->ring_no; - if (!sp->lro) { - rxb_size = atomic_read(&sp->rx_bufs_left[rng_n]); - level = rx_buffer_level(sp, rxb_size, rng_n); - - if ((level == PANIC) && (!TASKLET_IN_USE)) { - int ret; - DBG_PRINT(INTR_DBG, "%s: Rx BD hit ", __FUNCTION__); - DBG_PRINT(INTR_DBG, "PANIC levels\n"); - if ((ret = fill_rx_buffers(sp, rng_n)) == -ENOMEM) { - DBG_PRINT(ERR_DBG, "Out of memory in %s", - __FUNCTION__); - clear_bit(0, (&sp->tasklet_status)); - return IRQ_HANDLED; - } - clear_bit(0, (&sp->tasklet_status)); - } else if (level == LOW) { - tasklet_schedule(&sp->task); - } - } - else if (fill_rx_buffers(sp, rng_n) == -ENOMEM) { - DBG_PRINT(ERR_DBG, "%s:Out of memory", dev->name); - DBG_PRINT(ERR_DBG, " in Rx Intr!!\n"); - } + rx_intr_handler(ring); + s2io_chk_rx_buffers(sp, ring->ring_no); atomic_dec(&sp->isr_cnt); - return IRQ_HANDLED; } @@ -4268,37 +4237,8 @@ static irqreturn_t s2io_isr(int irq, void *dev_id, struct pt_regs *regs) * else schedule a tasklet to reallocate the buffers. */ #ifndef CONFIG_S2IO_NAPI - for (i = 0; i < config->rx_ring_num; i++) { - if (!sp->lro) { - int ret; - int rxb_size = atomic_read(&sp->rx_bufs_left[i]); - int level = rx_buffer_level(sp, rxb_size, i); - - if ((level == PANIC) && (!TASKLET_IN_USE)) { - DBG_PRINT(INTR_DBG, "%s: Rx BD hit ", - dev->name); - DBG_PRINT(INTR_DBG, "PANIC levels\n"); - if ((ret = fill_rx_buffers(sp, i)) == -ENOMEM) { - DBG_PRINT(ERR_DBG, "%s:Out of memory", - dev->name); - DBG_PRINT(ERR_DBG, " in ISR!!\n"); - clear_bit(0, (&sp->tasklet_status)); - atomic_dec(&sp->isr_cnt); - writeq(org_mask, &bar0->general_int_mask); - return IRQ_HANDLED; - } - clear_bit(0, (&sp->tasklet_status)); - } else if (level == LOW) { - tasklet_schedule(&sp->task); - } - } - else if (fill_rx_buffers(sp, i) == -ENOMEM) { - DBG_PRINT(ERR_DBG, "%s:Out of memory", - dev->name); - DBG_PRINT(ERR_DBG, " in Rx intr!!\n"); - break; - } - } + for (i = 0; i < config->rx_ring_num; i++) + s2io_chk_rx_buffers(sp, i); #endif writeq(org_mask, &bar0->general_int_mask); atomic_dec(&sp->isr_cnt); @@ -4328,6 +4268,8 @@ static void s2io_updt_stats(nic_t *sp) if (cnt == 5) break; /* Updt failed */ } while(1); + } else { + memset(sp->mac_control.stats_info, 0, sizeof(StatInfo_t)); } } @@ -5779,6 +5721,19 @@ static int s2io_ethtool_op_set_tx_csum(struct net_device *dev, u32 data) return 0; } +static u32 s2io_ethtool_op_get_tso(struct net_device *dev) +{ + return (dev->features & NETIF_F_TSO) != 0; +} +static int s2io_ethtool_op_set_tso(struct net_device *dev, u32 data) +{ + if (data) + dev->features |= (NETIF_F_TSO | NETIF_F_TSO6); + else + dev->features &= ~(NETIF_F_TSO | NETIF_F_TSO6); + + return 0; +} static struct ethtool_ops netdev_ethtool_ops = { .get_settings = s2io_ethtool_gset, @@ -5799,8 +5754,8 @@ static struct ethtool_ops netdev_ethtool_ops = { .get_sg = ethtool_op_get_sg, .set_sg = ethtool_op_set_sg, #ifdef NETIF_F_TSO - .get_tso = ethtool_op_get_tso, - .set_tso = ethtool_op_set_tso, + .get_tso = s2io_ethtool_op_get_tso, + .set_tso = s2io_ethtool_op_set_tso, #endif .get_ufo = ethtool_op_get_ufo, .set_ufo = ethtool_op_set_ufo, @@ -7438,8 +7393,13 @@ static int verify_l3_l4_lro_capable(lro_t *l_lro, struct iphdr *ip, if (ip->ihl != 5) /* IP has options */ return -1; + /* If we see CE codepoint in IP header, packet is not mergeable */ + if (INET_ECN_is_ce(ipv4_get_dsfield(ip))) + return -1; + + /* If we see ECE or CWR flags in TCP header, packet is not mergeable */ if (tcp->urg || tcp->psh || tcp->rst || tcp->syn || tcp->fin || - !tcp->ack) { + tcp->ece || tcp->cwr || !tcp->ack) { /* * Currently recognize only the ack control word and * any other control field being set would result in @@ -7593,18 +7553,16 @@ static void queue_rx_frame(struct sk_buff *skb) static void lro_append_pkt(nic_t *sp, lro_t *lro, struct sk_buff *skb, u32 tcp_len) { - struct sk_buff *tmp, *first = lro->parent; + struct sk_buff *first = lro->parent; first->len += tcp_len; first->data_len = lro->frags_len; skb_pull(skb, (skb->len - tcp_len)); - if ((tmp = skb_shinfo(first)->frag_list)) { - while (tmp->next) - tmp = tmp->next; - tmp->next = skb; - } + if (skb_shinfo(first)->frag_list) + lro->last_frag->next = skb; else skb_shinfo(first)->frag_list = skb; + lro->last_frag = skb; sp->mac_control.stats_info->sw_stat.clubbed_frms_cnt++; return; } diff --git a/drivers/net/s2io.h b/drivers/net/s2io.h index 1654f71a9af..5ed49c3be1e 100644 --- a/drivers/net/s2io.h +++ b/drivers/net/s2io.h @@ -719,6 +719,7 @@ struct msix_info_st { /* Data structure to represent a LRO session */ typedef struct lro { struct sk_buff *parent; + struct sk_buff *last_frag; u8 *l2h; struct iphdr *iph; struct tcphdr *tcph; @@ -1012,6 +1013,10 @@ static void queue_rx_frame(struct sk_buff *skb); static void update_L3L4_header(nic_t *sp, lro_t *lro); static void lro_append_pkt(nic_t *sp, lro_t *lro, struct sk_buff *skb, u32 tcp_len); +#define s2io_tcp_mss(skb) skb_shinfo(skb)->gso_size +#define s2io_udp_mss(skb) skb_shinfo(skb)->gso_size +#define s2io_offload_type(skb) skb_shinfo(skb)->gso_type + #define S2IO_PARM_INT(X, def_val) \ static unsigned int X = def_val;\ module_param(X , uint, 0); -- cgit v1.2.3-70-g09d2 From 817acf5ebd9ea21f134fc90064b0f6686c5b169d Mon Sep 17 00:00:00 2001 From: Sergei Shtylylov Date: Wed, 26 Jul 2006 00:53:53 +0400 Subject: [PATCH] Stop calling phy_stop_interrupts() twice Prevent phylib from freeing PHY IRQ twice on closing an eth device: phy_disconnect() first calls phy_stop_interrupts(), then it calls phy_stop_machine() which in turn calls phy_stop_interrupts() making the kernel complain on each bootup... Signed-off-by: Sergei Shtylyov Signed-off-by: Jeff Garzik --- drivers/net/phy/phy.c | 8 ++------ 1 file changed, 2 insertions(+), 6 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/phy/phy.c b/drivers/net/phy/phy.c index 7d5c2233c25..f5aad77288f 100644 --- a/drivers/net/phy/phy.c +++ b/drivers/net/phy/phy.c @@ -419,9 +419,8 @@ void phy_start_machine(struct phy_device *phydev, /* phy_stop_machine * - * description: Stops the state machine timer, sets the state to - * UP (unless it wasn't up yet), and then frees the interrupt, - * if it is in use. This function must be called BEFORE + * description: Stops the state machine timer, sets the state to UP + * (unless it wasn't up yet). This function must be called BEFORE * phy_detach. */ void phy_stop_machine(struct phy_device *phydev) @@ -433,9 +432,6 @@ void phy_stop_machine(struct phy_device *phydev) phydev->state = PHY_UP; spin_unlock(&phydev->lock); - if (phydev->irq != PHY_POLL) - phy_stop_interrupts(phydev); - phydev->adjust_state = NULL; } -- cgit v1.2.3-70-g09d2 From e454358ace657af953b5b289f49cf733973f41e4 Mon Sep 17 00:00:00 2001 From: Brice Goglin Date: Sun, 30 Jul 2006 00:14:09 -0400 Subject: [PATCH] myri10ge - Write the firmware in 256-bytes chunks When writing the firmware to the NIC, the FIFO is 256-bytes long, so we use 256-bytes chunks and a read to wait until the previous write is done. Signed-off-by: Brice Goglin Signed-off-by: Jeff Garzik --- drivers/net/myri10ge/myri10ge.c | 19 +++++++------------ 1 file changed, 7 insertions(+), 12 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/myri10ge/myri10ge.c b/drivers/net/myri10ge/myri10ge.c index c3e52c806b1..198c6f0e010 100644 --- a/drivers/net/myri10ge/myri10ge.c +++ b/drivers/net/myri10ge/myri10ge.c @@ -448,6 +448,7 @@ static int myri10ge_load_hotplug_firmware(struct myri10ge_priv *mgp, u32 * size) struct mcp_gen_header *hdr; size_t hdr_offset; int status; + unsigned i; if ((status = request_firmware(&fw, mgp->fw_name, dev)) < 0) { dev_err(dev, "Unable to load %s firmware image via hotplug\n", @@ -479,18 +480,12 @@ static int myri10ge_load_hotplug_firmware(struct myri10ge_priv *mgp, u32 * size) goto abort_with_fw; crc = crc32(~0, fw->data, fw->size); - if (mgp->tx.boundary == 2048) { - /* Avoid PCI burst on chipset with unaligned completions. */ - int i; - __iomem u32 *ptr = (__iomem u32 *) (mgp->sram + - MYRI10GE_FW_OFFSET); - for (i = 0; i < fw->size / 4; i++) { - __raw_writel(((u32 *) fw->data)[i], ptr + i); - wmb(); - } - } else { - myri10ge_pio_copy(mgp->sram + MYRI10GE_FW_OFFSET, fw->data, - fw->size); + for (i = 0; i < fw->size; i += 256) { + myri10ge_pio_copy(mgp->sram + MYRI10GE_FW_OFFSET + i, + fw->data + i, + min(256U, (unsigned)(fw->size - i))); + mb(); + readb(mgp->sram); } /* corruption checking is good for parity recovery and buggy chipset */ memcpy_fromio(fw->data, mgp->sram + MYRI10GE_FW_OFFSET, fw->size); -- cgit v1.2.3-70-g09d2 From c54772e751c0262073e85a7aa87f093fc0dd44f1 Mon Sep 17 00:00:00 2001 From: Brice Goglin Date: Sun, 30 Jul 2006 00:14:15 -0400 Subject: [PATCH] myri10ge - Fix spurious invokations of the watchdog reset handler Fix spurious invocations of the watchdog reset handler. Signed-off-by: Brice Goglin Signed-off-by: Jeff Garzik --- drivers/net/myri10ge/myri10ge.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) (limited to 'drivers/net') diff --git a/drivers/net/myri10ge/myri10ge.c b/drivers/net/myri10ge/myri10ge.c index 198c6f0e010..06440a86bae 100644 --- a/drivers/net/myri10ge/myri10ge.c +++ b/drivers/net/myri10ge/myri10ge.c @@ -177,6 +177,7 @@ struct myri10ge_priv { struct work_struct watchdog_work; struct timer_list watchdog_timer; int watchdog_tx_done; + int watchdog_tx_req; int watchdog_resets; int tx_linearized; int pause; @@ -2542,7 +2543,8 @@ static void myri10ge_watchdog_timer(unsigned long arg) mgp = (struct myri10ge_priv *)arg; if (mgp->tx.req != mgp->tx.done && - mgp->tx.done == mgp->watchdog_tx_done) + mgp->tx.done == mgp->watchdog_tx_done && + mgp->watchdog_tx_req != mgp->watchdog_tx_done) /* nic seems like it might be stuck.. */ schedule_work(&mgp->watchdog_work); else @@ -2551,6 +2553,7 @@ static void myri10ge_watchdog_timer(unsigned long arg) jiffies + myri10ge_watchdog_timeout * HZ); mgp->watchdog_tx_done = mgp->tx.done; + mgp->watchdog_tx_req = mgp->tx.req; } static int myri10ge_probe(struct pci_dev *pdev, const struct pci_device_id *ent) -- cgit v1.2.3-70-g09d2 From d14cc9a342a8004b0ecfe66f1f12120962b61d8c Mon Sep 17 00:00:00 2001 From: Christoph Hellwig Date: Mon, 7 Aug 2006 16:11:48 -0700 Subject: [TG3]: skb->dev assignment is done by netdev_alloc_skb All caller of netdev_alloc_skb need to assign skb->dev shortly afterwards. Move it into common code. Signed-off-by: Christoph Hellwig Signed-off-by: David S. Miller --- drivers/net/tg3.c | 2 -- 1 file changed, 2 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/tg3.c b/drivers/net/tg3.c index 6f97962dd06..0afbed6753f 100644 --- a/drivers/net/tg3.c +++ b/drivers/net/tg3.c @@ -3101,7 +3101,6 @@ static int tg3_alloc_rx_skb(struct tg3 *tp, u32 opaque_key, if (skb == NULL) return -ENOMEM; - skb->dev = tp->dev; skb_reserve(skb, tp->rx_offset); mapping = pci_map_single(tp->pdev, skb->data, @@ -3274,7 +3273,6 @@ static int tg3_rx(struct tg3 *tp, int budget) if (copy_skb == NULL) goto drop_it_no_recycle; - copy_skb->dev = tp->dev; skb_reserve(copy_skb, 2); skb_put(copy_skb, len); pci_dma_sync_single_for_cpu(tp->pdev, dma_addr, len, PCI_DMA_FROMDEVICE); -- cgit v1.2.3-70-g09d2 From 1b2a720506ccf7c30baaeda5d990c29b31e21726 Mon Sep 17 00:00:00 2001 From: Michael Chan Date: Mon, 7 Aug 2006 21:46:02 -0700 Subject: [TG3]: Fix tx race condition Fix a subtle race condition between tg3_start_xmit() and tg3_tx() discovered by Herbert Xu : CPU0 CPU1 tg3_start_xmit() if (tx_ring_full) { tx_lock tg3_tx() if (!netif_queue_stopped) netif_stop_queue() if (!tx_ring_full) update_tx_ring netif_wake_queue() tx_unlock } Even though tx_ring is updated before the if statement in tg3_tx() in program order, it can be re-ordered by the CPU as shown above. This scenario can cause the tx queue to be stopped forever if tg3_tx() has just freed up the entire tx_ring. The possibility of this happening should be very rare though. The following changes are made: 1. Add memory barrier to fix the above race condition. 2. Eliminate the private tx_lock altogether and rely solely on netif_tx_lock. This eliminates one spinlock in tg3_start_xmit() when the ring is full. 3. Because of 2, use netif_tx_lock in tg3_tx() before calling netif_wake_queue(). 4. Change TX_BUFFS_AVAIL to an inline function with a memory barrier. Herbert and David suggested using the memory barrier instead of volatile. 5. Check for the full wake queue condition before getting netif_tx_lock in tg3_tx(). This reduces the number of unnecessary spinlocks when the tx ring is full in a steady-state condition. 6. Update version to 3.65. Signed-off-by: Michael Chan Acked-by: Herbert Xu Signed-off-by: David S. Miller --- drivers/net/tg3.c | 49 ++++++++++++++++++++++++++++--------------------- drivers/net/tg3.h | 8 +++----- 2 files changed, 31 insertions(+), 26 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/tg3.c b/drivers/net/tg3.c index 0afbed6753f..eafabb253f0 100644 --- a/drivers/net/tg3.c +++ b/drivers/net/tg3.c @@ -68,8 +68,8 @@ #define DRV_MODULE_NAME "tg3" #define PFX DRV_MODULE_NAME ": " -#define DRV_MODULE_VERSION "3.64" -#define DRV_MODULE_RELDATE "July 31, 2006" +#define DRV_MODULE_VERSION "3.65" +#define DRV_MODULE_RELDATE "August 07, 2006" #define TG3_DEF_MAC_MODE 0 #define TG3_DEF_RX_MODE 0 @@ -123,9 +123,6 @@ TG3_RX_RCB_RING_SIZE(tp)) #define TG3_TX_RING_BYTES (sizeof(struct tg3_tx_buffer_desc) * \ TG3_TX_RING_SIZE) -#define TX_BUFFS_AVAIL(TP) \ - ((TP)->tx_pending - \ - (((TP)->tx_prod - (TP)->tx_cons) & (TG3_TX_RING_SIZE - 1))) #define NEXT_TX(N) (((N) + 1) & (TG3_TX_RING_SIZE - 1)) #define RX_PKT_BUF_SZ (1536 + tp->rx_offset + 64) @@ -2987,6 +2984,13 @@ static void tg3_tx_recover(struct tg3 *tp) spin_unlock(&tp->lock); } +static inline u32 tg3_tx_avail(struct tg3 *tp) +{ + smp_mb(); + return (tp->tx_pending - + ((tp->tx_prod - tp->tx_cons) & (TG3_TX_RING_SIZE - 1))); +} + /* Tigon3 never reports partial packet sends. So we do not * need special logic to handle SKBs that have not had all * of their frags sent yet, like SunGEM does. @@ -3038,12 +3042,20 @@ static void tg3_tx(struct tg3 *tp) tp->tx_cons = sw_idx; - if (unlikely(netif_queue_stopped(tp->dev))) { - spin_lock(&tp->tx_lock); + /* Need to make the tx_cons update visible to tg3_start_xmit() + * before checking for netif_queue_stopped(). Without the + * memory barrier, there is a small possibility that tg3_start_xmit() + * will miss it and cause the queue to be stopped forever. + */ + smp_mb(); + + if (unlikely(netif_queue_stopped(tp->dev) && + (tg3_tx_avail(tp) > TG3_TX_WAKEUP_THRESH))) { + netif_tx_lock(tp->dev); if (netif_queue_stopped(tp->dev) && - (TX_BUFFS_AVAIL(tp) > TG3_TX_WAKEUP_THRESH)) + (tg3_tx_avail(tp) > TG3_TX_WAKEUP_THRESH)) netif_wake_queue(tp->dev); - spin_unlock(&tp->tx_lock); + netif_tx_unlock(tp->dev); } } @@ -3795,7 +3807,7 @@ static int tg3_start_xmit(struct sk_buff *skb, struct net_device *dev) * interrupt. Furthermore, IRQ processing runs lockless so we have * no IRQ context deadlocks to worry about either. Rejoice! */ - if (unlikely(TX_BUFFS_AVAIL(tp) <= (skb_shinfo(skb)->nr_frags + 1))) { + if (unlikely(tg3_tx_avail(tp) <= (skb_shinfo(skb)->nr_frags + 1))) { if (!netif_queue_stopped(dev)) { netif_stop_queue(dev); @@ -3891,12 +3903,10 @@ static int tg3_start_xmit(struct sk_buff *skb, struct net_device *dev) tw32_tx_mbox((MAILBOX_SNDHOST_PROD_IDX_0 + TG3_64BIT_REG_LOW), entry); tp->tx_prod = entry; - if (unlikely(TX_BUFFS_AVAIL(tp) <= (MAX_SKB_FRAGS + 1))) { - spin_lock(&tp->tx_lock); + if (unlikely(tg3_tx_avail(tp) <= (MAX_SKB_FRAGS + 1))) { netif_stop_queue(dev); - if (TX_BUFFS_AVAIL(tp) > TG3_TX_WAKEUP_THRESH) + if (tg3_tx_avail(tp) > TG3_TX_WAKEUP_THRESH) netif_wake_queue(tp->dev); - spin_unlock(&tp->tx_lock); } out_unlock: @@ -3918,7 +3928,7 @@ static int tg3_tso_bug(struct tg3 *tp, struct sk_buff *skb) struct sk_buff *segs, *nskb; /* Estimate the number of fragments in the worst case */ - if (unlikely(TX_BUFFS_AVAIL(tp) <= (skb_shinfo(skb)->gso_segs * 3))) { + if (unlikely(tg3_tx_avail(tp) <= (skb_shinfo(skb)->gso_segs * 3))) { netif_stop_queue(tp->dev); return NETDEV_TX_BUSY; } @@ -3958,7 +3968,7 @@ static int tg3_start_xmit_dma_bug(struct sk_buff *skb, struct net_device *dev) * interrupt. Furthermore, IRQ processing runs lockless so we have * no IRQ context deadlocks to worry about either. Rejoice! */ - if (unlikely(TX_BUFFS_AVAIL(tp) <= (skb_shinfo(skb)->nr_frags + 1))) { + if (unlikely(tg3_tx_avail(tp) <= (skb_shinfo(skb)->nr_frags + 1))) { if (!netif_queue_stopped(dev)) { netif_stop_queue(dev); @@ -4108,12 +4118,10 @@ static int tg3_start_xmit_dma_bug(struct sk_buff *skb, struct net_device *dev) tw32_tx_mbox((MAILBOX_SNDHOST_PROD_IDX_0 + TG3_64BIT_REG_LOW), entry); tp->tx_prod = entry; - if (unlikely(TX_BUFFS_AVAIL(tp) <= (MAX_SKB_FRAGS + 1))) { - spin_lock(&tp->tx_lock); + if (unlikely(tg3_tx_avail(tp) <= (MAX_SKB_FRAGS + 1))) { netif_stop_queue(dev); - if (TX_BUFFS_AVAIL(tp) > TG3_TX_WAKEUP_THRESH) + if (tg3_tx_avail(tp) > TG3_TX_WAKEUP_THRESH) netif_wake_queue(tp->dev); - spin_unlock(&tp->tx_lock); } out_unlock: @@ -11472,7 +11480,6 @@ static int __devinit tg3_init_one(struct pci_dev *pdev, tp->grc_mode |= GRC_MODE_BSWAP_NONFRM_DATA; #endif spin_lock_init(&tp->lock); - spin_lock_init(&tp->tx_lock); spin_lock_init(&tp->indirect_lock); INIT_WORK(&tp->reset_task, tg3_reset_task, tp); diff --git a/drivers/net/tg3.h b/drivers/net/tg3.h index ba2c98711c8..3ecf356cfb0 100644 --- a/drivers/net/tg3.h +++ b/drivers/net/tg3.h @@ -2079,9 +2079,9 @@ struct tg3 { * lock: Held during reset, PHY access, timer, and when * updating tg3_flags and tg3_flags2. * - * tx_lock: Held during tg3_start_xmit and tg3_tx only - * when calling netif_[start|stop]_queue. - * tg3_start_xmit is protected by netif_tx_lock. + * netif_tx_lock: Held during tg3_start_xmit. tg3_tx holds + * netif_tx_lock when it needs to call + * netif_wake_queue. * * Both of these locks are to be held with BH safety. * @@ -2118,8 +2118,6 @@ struct tg3 { u32 tx_cons; u32 tx_pending; - spinlock_t tx_lock; - struct tg3_tx_buffer_desc *tx_ring; struct tx_ring_info *tx_buffers; dma_addr_t tx_desc_mapping; -- cgit v1.2.3-70-g09d2 From 013b68bf7cb4edfb8753aac9bde3cb60c84bc067 Mon Sep 17 00:00:00 2001 From: Brice Goglin Date: Wed, 9 Aug 2006 00:07:53 -0400 Subject: [PATCH] myri10ge: always re-enable dummy rdmas in myri10ge_resume Dummy RDMA are always enabled on device startup since commit 9a71db721a2cbb9921b929b2699ab181f5a3c6c0 (to work around buggy PCIe chipsets which do not implement resending properly). But, we also need to always re-enable them when resuming the device. Signed-off-by: Brice Goglin Signed-off-by: Jeff Garzik --- drivers/net/myri10ge/myri10ge.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/net') diff --git a/drivers/net/myri10ge/myri10ge.c b/drivers/net/myri10ge/myri10ge.c index 06440a86bae..9bdd43ab357 100644 --- a/drivers/net/myri10ge/myri10ge.c +++ b/drivers/net/myri10ge/myri10ge.c @@ -2425,7 +2425,7 @@ static int myri10ge_resume(struct pci_dev *pdev) } myri10ge_reset(mgp); - myri10ge_dummy_rdma(mgp, mgp->tx.boundary != 4096); + myri10ge_dummy_rdma(mgp, 1); /* Save configuration space to be restored if the * nic resets due to a parity error */ -- cgit v1.2.3-70-g09d2 From 8d3d35b4e20dc2e678fc7cb51165905b5a32fb76 Mon Sep 17 00:00:00 2001 From: Stephen Hemminger Date: Wed, 9 Aug 2006 14:14:50 -0700 Subject: [PATCH] sky2: phy power problems on 88e805X chips On the 88E805X chipsets (used in laptops), the PHY was not getting powered out of shutdown properly. The variable reg1 was getting reused incorrectly. This is probably the cause of the bug. http://bugzilla.kernel.org/show_bug.cgi?id=6471 Signed-off-by: Stephen Hemminger Signed-off-by: Jeff Garzik --- drivers/net/sky2.c | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/sky2.c b/drivers/net/sky2.c index de91609ca11..933e87f1cc6 100644 --- a/drivers/net/sky2.c +++ b/drivers/net/sky2.c @@ -233,6 +233,8 @@ static void sky2_set_power_state(struct sky2_hw *hw, pci_power_t state) if (hw->ports > 1) reg1 |= PCI_Y2_PHY2_COMA; } + sky2_pci_write32(hw, PCI_DEV_REG1, reg1); + udelay(100); if (hw->chip_id == CHIP_ID_YUKON_EC_U) { sky2_pci_write32(hw, PCI_DEV_REG3, 0); @@ -242,9 +244,6 @@ static void sky2_set_power_state(struct sky2_hw *hw, pci_power_t state) sky2_pci_write32(hw, PCI_DEV_REG5, 0); } - sky2_pci_write32(hw, PCI_DEV_REG1, reg1); - udelay(100); - break; case PCI_D3hot: -- cgit v1.2.3-70-g09d2 From 09e590e5d5a93f2eaa748a89c623258e6bad1648 Mon Sep 17 00:00:00 2001 From: Lennert Buytenhek Date: Sat, 12 Aug 2006 10:55:07 +0200 Subject: [PATCH] smc91x: disable DMA mode on the logicpd pxa270 Enabling PXA DMA for the smc91x on the logicpd pxa270 produces unacceptable interference with the TFT panel, so disable it. Also delete the lpd270 versions of the SMC_{in,out}[bl]() macros, as they aren't used, since the board only supports 16bit accesses. Signed-off-by: Lennert Buytenhek Signed-off-by: Jeff Garzik --- drivers/net/smc91x.h | 5 ----- 1 file changed, 5 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/smc91x.h b/drivers/net/smc91x.h index 4ec4b4d23ae..9f9f8f2d533 100644 --- a/drivers/net/smc91x.h +++ b/drivers/net/smc91x.h @@ -136,14 +136,9 @@ #define SMC_CAN_USE_32BIT 0 #define SMC_IO_SHIFT 0 #define SMC_NOWAIT 1 -#define SMC_USE_PXA_DMA 1 -#define SMC_inb(a, r) readb((a) + (r)) #define SMC_inw(a, r) readw((a) + (r)) -#define SMC_inl(a, r) readl((a) + (r)) -#define SMC_outb(v, a, r) writeb(v, (a) + (r)) #define SMC_outw(v, a, r) writew(v, (a) + (r)) -#define SMC_outl(v, a, r) writel(v, (a) + (r)) #define SMC_insw(a, r, p, l) readsw((a) + (r), p, l) #define SMC_outsw(a, r, p, l) writesw((a) + (r), p, l) -- cgit v1.2.3-70-g09d2 From 2f8af120a159a843948749ea88bcacda9779b132 Mon Sep 17 00:00:00 2001 From: Michael Chan Date: Tue, 15 Aug 2006 01:39:10 -0700 Subject: [BNX2]: Fix tx race condition. Fix a subtle race condition between bnx2_start_xmit() and bnx2_tx_int() similar to the one in tg3 discovered by Herbert Xu: CPU0 CPU1 bnx2_start_xmit() if (tx_ring_full) { tx_lock bnx2_tx() if (!netif_queue_stopped) netif_stop_queue() if (!tx_ring_full) update_tx_ring netif_wake_queue() tx_unlock } Even though tx_ring is updated before the if statement in bnx2_tx_int() in program order, it can be re-ordered by the CPU as shown above. This scenario can cause the tx queue to be stopped forever if bnx2_tx_int() has just freed up the entire tx_ring. The possibility of this happening should be very rare though. The following changes are made, very much identical to the tg3 fix: 1. Add memory barrier to fix the above race condition. 2. Eliminate the private tx_lock altogether and rely solely on netif_tx_lock. This eliminates one spinlock in bnx2_start_xmit() when the ring is full. 3. Because of 2, use netif_tx_lock in bnx2_tx_int() before calling netif_wake_queue(). 4. Add memory barrier to bnx2_tx_avail(). 5. Add bp->tx_wake_thresh which is set to half the tx ring size. 6. Check for the full wake queue condition before getting netif_tx_lock in tg3_tx(). This reduces the number of unnecessary spinlocks when the tx ring is full in a steady-state condition. Signed-off-by: Michael Chan Signed-off-by: David S. Miller --- drivers/net/bnx2.c | 35 +++++++++++++++++++---------------- drivers/net/bnx2.h | 12 +++++------- 2 files changed, 24 insertions(+), 23 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/bnx2.c b/drivers/net/bnx2.c index db73de0d251..2099edbbfdf 100644 --- a/drivers/net/bnx2.c +++ b/drivers/net/bnx2.c @@ -209,8 +209,10 @@ MODULE_DEVICE_TABLE(pci, bnx2_pci_tbl); static inline u32 bnx2_tx_avail(struct bnx2 *bp) { - u32 diff = TX_RING_IDX(bp->tx_prod) - TX_RING_IDX(bp->tx_cons); + u32 diff; + smp_mb(); + diff = TX_RING_IDX(bp->tx_prod) - TX_RING_IDX(bp->tx_cons); if (diff > MAX_TX_DESC_CNT) diff = (diff & MAX_TX_DESC_CNT) - 1; return (bp->tx_ring_size - diff); @@ -1686,15 +1688,20 @@ bnx2_tx_int(struct bnx2 *bp) } bp->tx_cons = sw_cons; + /* Need to make the tx_cons update visible to bnx2_start_xmit() + * before checking for netif_queue_stopped(). Without the + * memory barrier, there is a small possibility that bnx2_start_xmit() + * will miss it and cause the queue to be stopped forever. + */ + smp_mb(); - if (unlikely(netif_queue_stopped(bp->dev))) { - spin_lock(&bp->tx_lock); + if (unlikely(netif_queue_stopped(bp->dev)) && + (bnx2_tx_avail(bp) > bp->tx_wake_thresh)) { + netif_tx_lock(bp->dev); if ((netif_queue_stopped(bp->dev)) && - (bnx2_tx_avail(bp) > MAX_SKB_FRAGS)) { - + (bnx2_tx_avail(bp) > bp->tx_wake_thresh)) netif_wake_queue(bp->dev); - } - spin_unlock(&bp->tx_lock); + netif_tx_unlock(bp->dev); } } @@ -3503,6 +3510,8 @@ bnx2_init_tx_ring(struct bnx2 *bp) struct tx_bd *txbd; u32 val; + bp->tx_wake_thresh = bp->tx_ring_size / 2; + txbd = &bp->tx_desc_ring[MAX_TX_DESC_CNT]; txbd->tx_bd_haddr_hi = (u64) bp->tx_desc_mapping >> 32; @@ -4390,10 +4399,8 @@ bnx2_vlan_rx_kill_vid(struct net_device *dev, uint16_t vid) #endif /* Called with netif_tx_lock. - * hard_start_xmit is pseudo-lockless - a lock is only required when - * the tx queue is full. This way, we get the benefit of lockless - * operations most of the time without the complexities to handle - * netif_stop_queue/wake_queue race conditions. + * bnx2_tx_int() runs without netif_tx_lock unless it needs to call + * netif_wake_queue(). */ static int bnx2_start_xmit(struct sk_buff *skb, struct net_device *dev) @@ -4512,12 +4519,9 @@ bnx2_start_xmit(struct sk_buff *skb, struct net_device *dev) dev->trans_start = jiffies; if (unlikely(bnx2_tx_avail(bp) <= MAX_SKB_FRAGS)) { - spin_lock(&bp->tx_lock); netif_stop_queue(dev); - - if (bnx2_tx_avail(bp) > MAX_SKB_FRAGS) + if (bnx2_tx_avail(bp) > bp->tx_wake_thresh) netif_wake_queue(dev); - spin_unlock(&bp->tx_lock); } return NETDEV_TX_OK; @@ -5628,7 +5632,6 @@ bnx2_init_board(struct pci_dev *pdev, struct net_device *dev) bp->pdev = pdev; spin_lock_init(&bp->phy_lock); - spin_lock_init(&bp->tx_lock); INIT_WORK(&bp->reset_task, bnx2_reset_task, bp); dev->base_addr = dev->mem_start = pci_resource_start(pdev, 0); diff --git a/drivers/net/bnx2.h b/drivers/net/bnx2.h index 658c5ee95c7..fe804763c60 100644 --- a/drivers/net/bnx2.h +++ b/drivers/net/bnx2.h @@ -3890,10 +3890,6 @@ struct bnx2 { u32 tx_prod_bseq __attribute__((aligned(L1_CACHE_BYTES))); u16 tx_prod; - struct tx_bd *tx_desc_ring; - struct sw_bd *tx_buf_ring; - int tx_ring_size; - u16 tx_cons __attribute__((aligned(L1_CACHE_BYTES))); u16 hw_tx_cons; @@ -3916,9 +3912,11 @@ struct bnx2 { struct sw_bd *rx_buf_ring; struct rx_bd *rx_desc_ring[MAX_RX_RINGS]; - /* Only used to synchronize netif_stop_queue/wake_queue when tx */ - /* ring is full */ - spinlock_t tx_lock; + /* TX constants */ + struct tx_bd *tx_desc_ring; + struct sw_bd *tx_buf_ring; + int tx_ring_size; + u32 tx_wake_thresh; /* End of fields used in the performance code paths. */ -- cgit v1.2.3-70-g09d2 From 932f3772cf76cc1b1fd1538ceee3edba9bf2164f Mon Sep 17 00:00:00 2001 From: Michael Chan Date: Tue, 15 Aug 2006 01:39:36 -0700 Subject: [BNX2]: Convert to netdev_alloc_skb() Convert dev_alloc_skb() to netdev_alloc_skb() and increase default rx ring size to 255. The old ring size of 100 was too small. Update version to 1.4.44. Signed-off-by: Michael Chan Signed-off-by: David S. Miller --- drivers/net/bnx2.c | 14 ++++++-------- 1 file changed, 6 insertions(+), 8 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/bnx2.c b/drivers/net/bnx2.c index 2099edbbfdf..652eb05a6c2 100644 --- a/drivers/net/bnx2.c +++ b/drivers/net/bnx2.c @@ -56,8 +56,8 @@ #define DRV_MODULE_NAME "bnx2" #define PFX DRV_MODULE_NAME ": " -#define DRV_MODULE_VERSION "1.4.43" -#define DRV_MODULE_RELDATE "June 28, 2006" +#define DRV_MODULE_VERSION "1.4.44" +#define DRV_MODULE_RELDATE "August 10, 2006" #define RUN_AT(x) (jiffies + (x)) @@ -1571,7 +1571,7 @@ bnx2_alloc_rx_skb(struct bnx2 *bp, u16 index) struct rx_bd *rxbd = &bp->rx_desc_ring[RX_RING(index)][RX_IDX(index)]; unsigned long align; - skb = dev_alloc_skb(bp->rx_buf_size); + skb = netdev_alloc_skb(bp->dev, bp->rx_buf_size); if (skb == NULL) { return -ENOMEM; } @@ -1580,7 +1580,6 @@ bnx2_alloc_rx_skb(struct bnx2 *bp, u16 index) skb_reserve(skb, 8 - align); } - skb->dev = bp->dev; mapping = pci_map_single(bp->pdev, skb->data, bp->rx_buf_use_size, PCI_DMA_FROMDEVICE); @@ -1793,7 +1792,7 @@ bnx2_rx_int(struct bnx2 *bp, int budget) if ((bp->dev->mtu > 1500) && (len <= RX_COPY_THRESH)) { struct sk_buff *new_skb; - new_skb = dev_alloc_skb(len + 2); + new_skb = netdev_alloc_skb(bp->dev, len + 2); if (new_skb == NULL) goto reuse_rx; @@ -1804,7 +1803,6 @@ bnx2_rx_int(struct bnx2 *bp, int budget) skb_reserve(new_skb, 2); skb_put(new_skb, len); - new_skb->dev = bp->dev; bnx2_reuse_rx_skb(bp, skb, sw_ring_cons, sw_ring_prod); @@ -3961,7 +3959,7 @@ bnx2_run_loopback(struct bnx2 *bp, int loopback_mode) return -EINVAL; pkt_size = 1514; - skb = dev_alloc_skb(pkt_size); + skb = netdev_alloc_skb(bp->dev, pkt_size); if (!skb) return -ENOMEM; packet = skb_put(skb, pkt_size); @@ -5754,7 +5752,7 @@ bnx2_init_board(struct pci_dev *pdev, struct net_device *dev) bp->mac_addr[5] = (u8) reg; bp->tx_ring_size = MAX_TX_DESC_CNT; - bnx2_set_rx_ring_size(bp, 100); + bnx2_set_rx_ring_size(bp, 255); bp->rx_csum = 1; -- cgit v1.2.3-70-g09d2 From d4274b51a5c8147b5341e15927368e75b632d297 Mon Sep 17 00:00:00 2001 From: Panagiotis Issaris Date: Tue, 15 Aug 2006 16:01:07 -0700 Subject: [PPP]: handle kmalloc failures and convert to using kzalloc The PPP code contains two kmalloc()s followed by memset()s without handling a possible memory allocation failure. (Suggested by Joe Perches). And furthermore, conversions from kmalloc+memset to kzalloc. [akpm@osdl.org: fix error-path leak] [akpm@osdl.org: cleanups] [paulus@samba.org: don't add useless printk and cardmap_destroy calls] Signed-off-by: Panagiotis Issaris Signed-off-by: Andrew Morton Signed-off-by: Paul Mackerras Signed-off-by: David S. Miller --- drivers/net/ppp_generic.c | 30 +++++++++++++++++++----------- 1 file changed, 19 insertions(+), 11 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/ppp_generic.c b/drivers/net/ppp_generic.c index 0ec6e9d57b9..c872f7c6cce 100644 --- a/drivers/net/ppp_generic.c +++ b/drivers/net/ppp_generic.c @@ -192,7 +192,7 @@ struct cardmap { void *ptr[CARDMAP_WIDTH]; }; static void *cardmap_get(struct cardmap *map, unsigned int nr); -static void cardmap_set(struct cardmap **map, unsigned int nr, void *ptr); +static int cardmap_set(struct cardmap **map, unsigned int nr, void *ptr); static unsigned int cardmap_find_first_free(struct cardmap *map); static void cardmap_destroy(struct cardmap **map); @@ -1995,10 +1995,9 @@ ppp_register_channel(struct ppp_channel *chan) { struct channel *pch; - pch = kmalloc(sizeof(struct channel), GFP_KERNEL); + pch = kzalloc(sizeof(struct channel), GFP_KERNEL); if (pch == 0) return -ENOMEM; - memset(pch, 0, sizeof(struct channel)); pch->ppp = NULL; pch->chan = chan; chan->ppp = pch; @@ -2408,13 +2407,12 @@ ppp_create_interface(int unit, int *retp) int ret = -ENOMEM; int i; - ppp = kmalloc(sizeof(struct ppp), GFP_KERNEL); + ppp = kzalloc(sizeof(struct ppp), GFP_KERNEL); if (!ppp) goto out; dev = alloc_netdev(0, "", ppp_setup); if (!dev) goto out1; - memset(ppp, 0, sizeof(struct ppp)); ppp->mru = PPP_MRU; init_ppp_file(&ppp->file, INTERFACE); @@ -2454,11 +2452,16 @@ ppp_create_interface(int unit, int *retp) } atomic_inc(&ppp_unit_count); - cardmap_set(&all_ppp_units, unit, ppp); + ret = cardmap_set(&all_ppp_units, unit, ppp); + if (ret != 0) + goto out3; + mutex_unlock(&all_ppp_mutex); *retp = 0; return ppp; +out3: + atomic_dec(&ppp_unit_count); out2: mutex_unlock(&all_ppp_mutex); free_netdev(dev); @@ -2695,7 +2698,7 @@ static void *cardmap_get(struct cardmap *map, unsigned int nr) return NULL; } -static void cardmap_set(struct cardmap **pmap, unsigned int nr, void *ptr) +static int cardmap_set(struct cardmap **pmap, unsigned int nr, void *ptr) { struct cardmap *p; int i; @@ -2704,8 +2707,9 @@ static void cardmap_set(struct cardmap **pmap, unsigned int nr, void *ptr) if (p == NULL || (nr >> p->shift) >= CARDMAP_WIDTH) { do { /* need a new top level */ - struct cardmap *np = kmalloc(sizeof(*np), GFP_KERNEL); - memset(np, 0, sizeof(*np)); + struct cardmap *np = kzalloc(sizeof(*np), GFP_KERNEL); + if (!np) + goto enomem; np->ptr[0] = p; if (p != NULL) { np->shift = p->shift + CARDMAP_ORDER; @@ -2719,8 +2723,9 @@ static void cardmap_set(struct cardmap **pmap, unsigned int nr, void *ptr) while (p->shift > 0) { i = (nr >> p->shift) & CARDMAP_MASK; if (p->ptr[i] == NULL) { - struct cardmap *np = kmalloc(sizeof(*np), GFP_KERNEL); - memset(np, 0, sizeof(*np)); + struct cardmap *np = kzalloc(sizeof(*np), GFP_KERNEL); + if (!np) + goto enomem; np->shift = p->shift - CARDMAP_ORDER; np->parent = p; p->ptr[i] = np; @@ -2735,6 +2740,9 @@ static void cardmap_set(struct cardmap **pmap, unsigned int nr, void *ptr) set_bit(i, &p->inuse); else clear_bit(i, &p->inuse); + return 0; + enomem: + return -ENOMEM; } static unsigned int cardmap_find_first_free(struct cardmap *map) -- cgit v1.2.3-70-g09d2 From 864fe05dfa4ff3e230acf3b4ccf878b6f22603c4 Mon Sep 17 00:00:00 2001 From: Andrew Morton Date: Mon, 14 Aug 2006 22:59:57 -0700 Subject: [PATCH] 82596 section fixes WARNING: drivers/net/82596.o - Section mismatch: reference to .init.text:i82596_probe from .text between 'init_module' (at offset 0x141) and 'i596_add_cmd' Also nail a couple of crazy inlines. Cc: Jeff Garzik Signed-off-by: Andrew Morton Signed-off-by: Jeff Garzik --- drivers/net/82596.c | 9 +++++---- 1 file changed, 5 insertions(+), 4 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/82596.c b/drivers/net/82596.c index 7e2ca957146..257d3bce399 100644 --- a/drivers/net/82596.c +++ b/drivers/net/82596.c @@ -899,7 +899,7 @@ memory_squeeze: } -static inline void i596_cleanup_cmd(struct net_device *dev, struct i596_private *lp) +static void i596_cleanup_cmd(struct net_device *dev, struct i596_private *lp) { struct i596_cmd *ptr; @@ -932,7 +932,8 @@ static inline void i596_cleanup_cmd(struct net_device *dev, struct i596_private lp->scb.cmd = I596_NULL; } -static inline void i596_reset(struct net_device *dev, struct i596_private *lp, int ioaddr) +static void i596_reset(struct net_device *dev, struct i596_private *lp, + int ioaddr) { unsigned long flags; @@ -1578,7 +1579,7 @@ static int debug = -1; module_param(debug, int, 0); MODULE_PARM_DESC(debug, "i82596 debug mask"); -int init_module(void) +int __init init_module(void) { if (debug >= 0) i596_debug = debug; @@ -1588,7 +1589,7 @@ int init_module(void) return 0; } -void cleanup_module(void) +void __exit cleanup_module(void) { unregister_netdev(dev_82596); #ifdef __mc68000__ -- cgit v1.2.3-70-g09d2 From 62a87b8051ded3d1fcb89773c9febd1bb34d3cbd Mon Sep 17 00:00:00 2001 From: Andrew Morton Date: Mon, 14 Aug 2006 22:59:57 -0700 Subject: [PATCH] ac3200 section fixes WARNING: drivers/net/ac3200.o - Section mismatch: reference to .init.text: from .text between 'init_module' (at offset 0xf9) and 'ac_close_card' Cc: Jeff Garzik Signed-off-by: Andrew Morton Signed-off-by: Jeff Garzik --- drivers/net/ac3200.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/ac3200.c b/drivers/net/ac3200.c index 7952dc6d77e..0fbbcb75af6 100644 --- a/drivers/net/ac3200.c +++ b/drivers/net/ac3200.c @@ -370,8 +370,7 @@ MODULE_PARM_DESC(mem, "Memory base address(es)"); MODULE_DESCRIPTION("Ansel AC3200 EISA ethernet driver"); MODULE_LICENSE("GPL"); -int -init_module(void) +int __init init_module(void) { struct net_device *dev; int this_dev, found = 0; -- cgit v1.2.3-70-g09d2 From 5f3bc456ce190a963a8816be5a318df9998f3bc5 Mon Sep 17 00:00:00 2001 From: Andrew Morton Date: Mon, 14 Aug 2006 22:59:58 -0700 Subject: [PATCH] cops section fix WARNING: drivers/net/appletalk/cops.o - Section mismatch: reference to .init.text:cops_probe from .text between 'init_module' (at offset 0xae) and 'cops_rx' Cc: "David S. Miller" Signed-off-by: Andrew Morton Signed-off-by: Jeff Garzik --- drivers/net/appletalk/cops.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/net') diff --git a/drivers/net/appletalk/cops.c b/drivers/net/appletalk/cops.c index 1d01ac0000e..ae7f828344d 100644 --- a/drivers/net/appletalk/cops.c +++ b/drivers/net/appletalk/cops.c @@ -1030,7 +1030,7 @@ module_param(io, int, 0); module_param(irq, int, 0); module_param(board_type, int, 0); -int init_module(void) +int __init init_module(void) { if (io == 0) printk(KERN_WARNING "%s: You shouldn't autoprobe with insmod\n", -- cgit v1.2.3-70-g09d2 From e26c129a49a7a4990f362a9cdb3084198b4d9d7b Mon Sep 17 00:00:00 2001 From: Andrew Morton Date: Mon, 14 Aug 2006 22:59:59 -0700 Subject: [PATCH] cs89x0 section fix WARNING: drivers/net/cs89x0.o - Section mismatch: reference to .init.data:version from .text between 'init_module' (at offset 0x13d8) and 'net_get_stats' WARNING: drivers/net/cs89x0.o - Section mismatch: reference to .init.text: from .text between 'init_module' (at offset 0x1634) and 'net_get_stats' WARNING: drivers/net/cs89x0.o - Section mismatch: reference to .init.text: from .text between 'init_module' (at offset 0x1a1f) and 'net_get_stats' Cc: Jeff Garzik Signed-off-by: Andrew Morton Signed-off-by: Jeff Garzik --- drivers/net/cs89x0.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/cs89x0.c b/drivers/net/cs89x0.c index 47eecce35fa..2dcca79b1f6 100644 --- a/drivers/net/cs89x0.c +++ b/drivers/net/cs89x0.c @@ -1905,8 +1905,7 @@ MODULE_LICENSE("GPL"); */ -int -init_module(void) +int __init init_module(void) { struct net_device *dev = alloc_etherdev(sizeof(struct net_local)); struct net_local *lp; -- cgit v1.2.3-70-g09d2 From 5d930108c914c04fbb0bfbb059d23a5fcaf0d1e7 Mon Sep 17 00:00:00 2001 From: Andrew Morton Date: Mon, 14 Aug 2006 22:59:59 -0700 Subject: [PATCH] at1700 section fix WARNING: drivers/net/at1700.o - Section mismatch: reference to .init.text:at1700_probe from .text between 'init_module' (at offset 0x75) and 'net_get_stats' Cc: Jeff Garzik Signed-off-by: Andrew Morton Signed-off-by: Jeff Garzik --- drivers/net/at1700.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/net') diff --git a/drivers/net/at1700.c b/drivers/net/at1700.c index 5d7929c79bc..4ca061c2d5b 100644 --- a/drivers/net/at1700.c +++ b/drivers/net/at1700.c @@ -901,7 +901,7 @@ MODULE_PARM_DESC(io, "AT1700/FMV18X I/O base address"); MODULE_PARM_DESC(irq, "AT1700/FMV18X IRQ number"); MODULE_PARM_DESC(net_debug, "AT1700/FMV18X debug level (0-6)"); -int init_module(void) +int __init init_module(void) { if (io == 0) printk("at1700: You should not use auto-probing with insmod!\n"); -- cgit v1.2.3-70-g09d2 From d543cbb6d192313d9027ed09c7a1e085b1234082 Mon Sep 17 00:00:00 2001 From: Andrew Morton Date: Mon, 14 Aug 2006 23:00:00 -0700 Subject: [PATCH] e2100 section fix WARNING: drivers/net/e2100.o - Section mismatch: reference to .init.text: from .text between 'init_module' (at offset 0xd9) and 'e21_reset_8390' Cc: Jeff Garzik Signed-off-by: Andrew Morton Signed-off-by: Jeff Garzik --- drivers/net/e2100.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/e2100.c b/drivers/net/e2100.c index e5c5cd2a271..e4e733a380e 100644 --- a/drivers/net/e2100.c +++ b/drivers/net/e2100.c @@ -425,8 +425,8 @@ MODULE_LICENSE("GPL"); /* This is set up so that only a single autoprobe takes place per call. ISA device autoprobes on a running machine are not recommended. */ -int -init_module(void) + +int __init init_module(void) { struct net_device *dev; int this_dev, found = 0; -- cgit v1.2.3-70-g09d2 From 02a3245fcf0911ff92100aa54823dc1c5950fba9 Mon Sep 17 00:00:00 2001 From: Andrew Morton Date: Mon, 14 Aug 2006 23:00:01 -0700 Subject: [PATCH] eepro section fix WARNING: drivers/net/eepro.o - Section mismatch: reference to .init.text: from .text between 'init_module' (at offset 0x284) and 'eepro_ethtool_get_drvinfo' WARNING: drivers/net/eepro.o - Section mismatch: reference to .init.text: from .text between 'init_module' (at offset 0x2a7) and 'eepro_ethtool_get_drvinfo' WARNING: drivers/net/eepro.o - Section mismatch: reference to .init.data:eepro_portlist from .text between 'init_module' (at offset 0x2b3) and 'eepro_ethtool_get_drvinfo' Cc: Jeff Garzik Signed-off-by: Andrew Morton Signed-off-by: Jeff Garzik --- drivers/net/eepro.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/eepro.c b/drivers/net/eepro.c index 20d31430c74..8dc61d65dd2 100644 --- a/drivers/net/eepro.c +++ b/drivers/net/eepro.c @@ -1807,8 +1807,7 @@ MODULE_PARM_DESC(irq, "EtherExpress Pro/10 IRQ number(s)"); MODULE_PARM_DESC(mem, "EtherExpress Pro/10 Rx buffer size(es) in kB (3-29)"); MODULE_PARM_DESC(autodetect, "EtherExpress Pro/10 force board(s) detection (0-1)"); -int -init_module(void) +int __init init_module(void) { struct net_device *dev; int i; -- cgit v1.2.3-70-g09d2 From b1176b95b4b851b05a2f541ef54e7ce3ed358d19 Mon Sep 17 00:00:00 2001 From: Andrew Morton Date: Mon, 14 Aug 2006 23:00:01 -0700 Subject: [PATCH] eexpress section fix WARNING: drivers/net/eexpress.o - Section mismatch: reference to .init.text: from .text between 'init_module' (at offset 0x6c3) and 'eexp_hw_lasttxstat' WARNING: drivers/net/eexpress.o - Section mismatch: reference to .init.text: from .text between 'init_module' (at offset 0x74f) and 'eexp_hw_lasttxstat' Cc: Jeff Garzik Signed-off-by: Andrew Morton Signed-off-by: Jeff Garzik --- drivers/net/eexpress.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/net') diff --git a/drivers/net/eexpress.c b/drivers/net/eexpress.c index 33291bcf6d4..0701c1d810c 100644 --- a/drivers/net/eexpress.c +++ b/drivers/net/eexpress.c @@ -1698,7 +1698,7 @@ MODULE_LICENSE("GPL"); * are specified, we verify and then use them. If no parameters are given, we * autoprobe for one card only. */ -int init_module(void) +int __init init_module(void) { struct net_device *dev; int this_dev, found = 0; -- cgit v1.2.3-70-g09d2 From 5757f5c6d7d9cbe4bf6a464f1842a767f505d440 Mon Sep 17 00:00:00 2001 From: Andrew Morton Date: Mon, 14 Aug 2006 23:00:02 -0700 Subject: [PATCH] es3210 section fix WARNING: drivers/net/es3210.o - Section mismatch: reference to .init.text: from .text between 'init_module' (at offset 0xdf) and 'es_close' WARNING: drivers/net/es3210.o - Section mismatch: reference to .init.text: from .text between 'init_module' (at offset 0x100) and 'es_close' Cc: Jeff Garzik Signed-off-by: Andrew Morton Signed-off-by: Jeff Garzik --- drivers/net/es3210.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/es3210.c b/drivers/net/es3210.c index 6b0ab1eac3f..fd7b32a24ea 100644 --- a/drivers/net/es3210.c +++ b/drivers/net/es3210.c @@ -421,8 +421,7 @@ MODULE_PARM_DESC(mem, "memory base address(es)"); MODULE_DESCRIPTION("Racal-Interlan ES3210 EISA ethernet driver"); MODULE_LICENSE("GPL"); -int -init_module(void) +int __init init_module(void) { struct net_device *dev; int this_dev, found = 0; -- cgit v1.2.3-70-g09d2 From 58f149fc65ebced1148789cfb37457a8c7aaca75 Mon Sep 17 00:00:00 2001 From: Andrew Morton Date: Mon, 14 Aug 2006 23:00:03 -0700 Subject: [PATCH] eth16i section fix WARNING: drivers/net/eth16i.o - Section mismatch: reference to .init.data:cardname from .text between 'init_module' (at offset 0x6d2) and 'eth16i_multicast' WARNING: drivers/net/eth16i.o - Section mismatch: reference to .init.text: from .text between 'init_module' (at offset 0x6ef) and 'eth16i_multicast' WARNING: drivers/net/eth16i.o - Section mismatch: reference to .init.text: from .text between 'init_module' (at offset 0x702) and 'eth16i_multicast' WARNING: drivers/net/eth16i.o - Section mismatch: reference to .init.data:cardname from .text between 'init_module' (at offset 0x70e) and 'eth16i_multicast' WARNING: drivers/net/eth16i.o - Section mismatch: reference to .init.text: from .text between 'init_module' (at offset 0x71d) and 'eth16i_multicast' WARNING: drivers/net/eth16i.o - Section mismatch: reference to .init.data:cardname from .text between 'init_module' (at offset 0x729) and 'eth16i_multicast' Cc: Jeff Garzik Signed-off-by: Andrew Morton Signed-off-by: Jeff Garzik --- drivers/net/eth16i.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/net') diff --git a/drivers/net/eth16i.c b/drivers/net/eth16i.c index 4bf76f86d8e..ca42efa9143 100644 --- a/drivers/net/eth16i.c +++ b/drivers/net/eth16i.c @@ -1434,7 +1434,7 @@ MODULE_PARM_DESC(mediatype, "eth16i media type of interface(s) (bnc,tp,dix,auto, module_param(debug, int, 0); MODULE_PARM_DESC(debug, "eth16i debug level (0-6)"); -int init_module(void) +int __init init_module(void) { int this_dev, found = 0; struct net_device *dev; -- cgit v1.2.3-70-g09d2 From 3805f0e28ca313893b87e881201561d5c1857dd8 Mon Sep 17 00:00:00 2001 From: Andrew Morton Date: Mon, 14 Aug 2006 23:00:03 -0700 Subject: [PATCH] lance section fix WARNING: drivers/net/lance.o - Section mismatch: reference to .init.data:lance_portlist from .text between 'init_module' (at offset 0x8d3) and 'lance_purge_ring' Cc: Jeff Garzik Signed-off-by: Andrew Morton Signed-off-by: Jeff Garzik --- drivers/net/lance.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/net') diff --git a/drivers/net/lance.c b/drivers/net/lance.c index c1c3452c90c..5b4dbfe5fb7 100644 --- a/drivers/net/lance.c +++ b/drivers/net/lance.c @@ -326,7 +326,7 @@ MODULE_PARM_DESC(dma, "LANCE/PCnet ISA DMA channel (ignored for some devices)"); MODULE_PARM_DESC(irq, "LANCE/PCnet IRQ number (ignored for some devices)"); MODULE_PARM_DESC(lance_debug, "LANCE/PCnet debug level (0-7)"); -int init_module(void) +int __init init_module(void) { struct net_device *dev; int this_dev, found = 0; -- cgit v1.2.3-70-g09d2 From dab3d02ec05d16aab680de471cb5d20c5d4852e8 Mon Sep 17 00:00:00 2001 From: Andrew Morton Date: Mon, 14 Aug 2006 23:00:04 -0700 Subject: [PATCH] lne390 section fix WARNING: drivers/net/lne390.o - Section mismatch: reference to .init.text: from .text between 'init_module' (at offset 0x100) and 'lne390_close' Cc: Jeff Garzik Signed-off-by: Andrew Morton Signed-off-by: Jeff Garzik --- drivers/net/lne390.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/net') diff --git a/drivers/net/lne390.c b/drivers/net/lne390.c index 646e89fc356..c0ec7f6abcb 100644 --- a/drivers/net/lne390.c +++ b/drivers/net/lne390.c @@ -406,7 +406,7 @@ MODULE_PARM_DESC(mem, "memory base address(es)"); MODULE_DESCRIPTION("Mylex LNE390A/B EISA Ethernet driver"); MODULE_LICENSE("GPL"); -int init_module(void) +int __init init_module(void) { struct net_device *dev; int this_dev, found = 0; -- cgit v1.2.3-70-g09d2 From 19a8664d8a05f75cab3cd4eb8022d22d3f0c53c3 Mon Sep 17 00:00:00 2001 From: Andrew Morton Date: Mon, 14 Aug 2006 23:00:05 -0700 Subject: [PATCH] ni52 section fix WARNING: drivers/net/ni52.o - Section mismatch: reference to .init.text:ni52_probe from .text between 'init_module' (at offset 0x997) and 'ni52_close' WARNING: drivers/net/ni65.o - Section mismatch: reference to .init.text:ni65_probe from .text between 'init_module' (at offset 0x54a) and 'ni65_stop_start' Cc: Jeff Garzik Signed-off-by: Andrew Morton Signed-off-by: Jeff Garzik --- drivers/net/ni52.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/net') diff --git a/drivers/net/ni52.c b/drivers/net/ni52.c index fa854c8fde7..4d52ecf8af5 100644 --- a/drivers/net/ni52.c +++ b/drivers/net/ni52.c @@ -1323,7 +1323,7 @@ MODULE_PARM_DESC(irq, "NI5210 IRQ number,required"); MODULE_PARM_DESC(memstart, "NI5210 memory base address,required"); MODULE_PARM_DESC(memend, "NI5210 memory end address,required"); -int init_module(void) +int __init init_module(void) { if(io <= 0x0 || !memend || !memstart || irq < 2) { printk("ni52: Autoprobing not allowed for modules.\nni52: Set symbols 'io' 'irq' 'memstart' and 'memend'\n"); -- cgit v1.2.3-70-g09d2 From 6d2cdb4fd1cc1b15ad070a57c9b2bc40bb1565e7 Mon Sep 17 00:00:00 2001 From: Andrew Morton Date: Mon, 14 Aug 2006 23:00:05 -0700 Subject: [PATCH] ibmtr section fix WARNING: drivers/net/tokenring/ibmtr.o - Section mismatch: reference to .init.data:ibmtr_mem_base from .text between 'ibmtr_probe1' (at offset 0x6e6) and 'ibmtr_probe_card' WARNING: drivers/net/tokenring/ibmtr.o - Section mismatch: reference to .init.data:ibmtr_mem_base from .text between 'ibmtr_probe1' (at offset 0x74a) and 'ibmtr_probe_card' WARNING: drivers/net/tokenring/ibmtr.o - Section mismatch: reference to .init.data:ibmtr_mem_base from .text between 'ibmtr_probe1' (at offset 0x7fd) and 'ibmtr_probe_card' Cc: Jeff Garzik Signed-off-by: Andrew Morton Signed-off-by: Jeff Garzik --- drivers/net/tokenring/ibmtr.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/tokenring/ibmtr.c b/drivers/net/tokenring/ibmtr.c index 9f491563944..4470025ff7f 100644 --- a/drivers/net/tokenring/ibmtr.c +++ b/drivers/net/tokenring/ibmtr.c @@ -140,7 +140,7 @@ in the event that chatty debug messages are desired - jjs 12/30/98 */ /* version and credits */ #ifndef PCMCIA -static char version[] __initdata = +static char version[] __devinitdata = "\nibmtr.c: v1.3.57 8/ 7/94 Peter De Schrijver and Mark Swanson\n" " v2.1.125 10/20/98 Paul Norton \n" " v2.2.0 12/30/98 Joel Sloan \n" @@ -216,7 +216,7 @@ static int __devinitdata turbo_irq[IBMTR_MAX_ADAPTERS] = {0}; static int __devinitdata turbo_searched = 0; #ifndef PCMCIA -static __u32 ibmtr_mem_base __initdata = 0xd0000; +static __u32 ibmtr_mem_base __devinitdata = 0xd0000; #endif static void __devinit PrtChanID(char *pcid, short stride) -- cgit v1.2.3-70-g09d2 From daca7cd7612639848c39744e02dab537755b31a1 Mon Sep 17 00:00:00 2001 From: Andrew Morton Date: Mon, 14 Aug 2006 23:00:06 -0700 Subject: [PATCH] smctr section fix WARNING: drivers/net/tokenring/smctr.o - Section mismatch: reference to .init.text: from .text between 'init_module' (at offset 0x2ba0) and 'smctr_reset_adapter' WARNING: drivers/net/tokenring/smctr.o - Section mismatch: reference to .init.text:smctr_probe from .text between 'init_module' (at offset 0x2bf4) and 'smctr_reset_adapter' Cc: Jeff Garzik Signed-off-by: Andrew Morton Signed-off-by: Jeff Garzik --- drivers/net/tokenring/smctr.c | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/tokenring/smctr.c b/drivers/net/tokenring/smctr.c index cd2e0251e2b..85a7f797d34 100644 --- a/drivers/net/tokenring/smctr.c +++ b/drivers/net/tokenring/smctr.c @@ -5666,7 +5666,7 @@ module_param_array(io, int, NULL, 0); module_param_array(irq, int, NULL, 0); module_param(ringspeed, int, 0); -static struct net_device *setup_card(int n) +static struct net_device * __init setup_card(int n) { struct net_device *dev = alloc_trdev(sizeof(struct net_local)); int err; @@ -5696,9 +5696,8 @@ out: free_netdev(dev); return ERR_PTR(err); } - -int init_module(void) +int __init init_module(void) { int i, found = 0; struct net_device *dev; -- cgit v1.2.3-70-g09d2 From 5e5fa01d55e9949660a89b23f4a43884eaf49097 Mon Sep 17 00:00:00 2001 From: Andrew Morton Date: Mon, 14 Aug 2006 23:00:06 -0700 Subject: [PATCH] wd section fix WARNING: drivers/net/wd.o - Section mismatch: reference to .init.text: from .text between 'init_module' (at offset 0xfd) and 'wd_open' WARNING: drivers/net/wd.o - Section mismatch: reference to .init.text: from .text between 'init_module' (at offset 0x14b) and 'wd_open' WARNING: drivers/net/wd.o - Section mismatch: reference to .init.data:wd_portlist from .text between 'init_module' (at offset 0x17f) and 'wd_open' Cc: Jeff Garzik Signed-off-by: Andrew Morton Signed-off-by: Jeff Garzik --- drivers/net/wd.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/wd.c b/drivers/net/wd.c index 7caa8dc88a5..b1ba1872f31 100644 --- a/drivers/net/wd.c +++ b/drivers/net/wd.c @@ -500,8 +500,8 @@ MODULE_LICENSE("GPL"); /* This is set up so that only a single autoprobe takes place per call. ISA device autoprobes on a running machine are not recommended. */ -int -init_module(void) + +int __init init_module(void) { struct net_device *dev; int this_dev, found = 0; -- cgit v1.2.3-70-g09d2 From 1e13b0d82d24ac3c8b2f16a09dd9ce537cad134c Mon Sep 17 00:00:00 2001 From: Andrew Morton Date: Mon, 14 Aug 2006 23:00:07 -0700 Subject: [PATCH] ni65 section fix WARNING: drivers/net/ni65.o - Section mismatch: reference to .init.text:ni65_probe from .text between 'init_module' (at offset 0x54a) and 'ni65_stop_start' Cc: Jeff Garzik Signed-off-by: Andrew Morton Signed-off-by: Jeff Garzik --- drivers/net/ni65.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/net') diff --git a/drivers/net/ni65.c b/drivers/net/ni65.c index bb42ff21848..810cc572f5f 100644 --- a/drivers/net/ni65.c +++ b/drivers/net/ni65.c @@ -1253,7 +1253,7 @@ MODULE_PARM_DESC(irq, "ni6510 IRQ number (ignored for some cards)"); MODULE_PARM_DESC(io, "ni6510 I/O base address"); MODULE_PARM_DESC(dma, "ni6510 ISA DMA channel (ignored for some cards)"); -int init_module(void) +int __init init_module(void) { dev_ni65 = ni65_probe(-1); return IS_ERR(dev_ni65) ? PTR_ERR(dev_ni65) : 0; -- cgit v1.2.3-70-g09d2 From c971ef46cb94b8bb4a12555fa757e5f67934fcd9 Mon Sep 17 00:00:00 2001 From: Andrew Morton Date: Mon, 14 Aug 2006 23:00:08 -0700 Subject: [PATCH] seeq8005 section fix WARNING: drivers/net/seeq8005.o - Section mismatch: reference to .init.text:seeq8005_probe from .text between 'init_module' (at offset 0x106) and 'seeq8005_open' Cc: Jeff Garzik Signed-off-by: Andrew Morton Signed-off-by: Jeff Garzik --- drivers/net/seeq8005.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/net') diff --git a/drivers/net/seeq8005.c b/drivers/net/seeq8005.c index efd0f235020..01392bca022 100644 --- a/drivers/net/seeq8005.c +++ b/drivers/net/seeq8005.c @@ -742,7 +742,7 @@ module_param(irq, int, 0); MODULE_PARM_DESC(io, "SEEQ 8005 I/O base address"); MODULE_PARM_DESC(irq, "SEEQ 8005 IRQ number"); -int init_module(void) +int __init init_module(void) { dev_seeq = seeq8005_probe(-1); if (IS_ERR(dev_seeq)) -- cgit v1.2.3-70-g09d2 From c9d26c9785d900d8547b268f0c0507f252879c48 Mon Sep 17 00:00:00 2001 From: Andrew Morton Date: Mon, 14 Aug 2006 23:00:08 -0700 Subject: [PATCH] winbond-840 section fix With CONFIG_HOTPLUG=n it won't compile: drivers/net/tulip/winbond-840.c:141: error: version causes a section type conflict (For some reason it gets the same error if marked __initdata. Give up.) Cc: Valerie Henson Cc: Jeff Garzik Signed-off-by: Andrew Morton Signed-off-by: Jeff Garzik --- drivers/net/tulip/winbond-840.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/net') diff --git a/drivers/net/tulip/winbond-840.c b/drivers/net/tulip/winbond-840.c index 7f414815cc6..eba9083da14 100644 --- a/drivers/net/tulip/winbond-840.c +++ b/drivers/net/tulip/winbond-840.c @@ -138,7 +138,7 @@ static int full_duplex[MAX_UNITS] = {-1, -1, -1, -1, -1, -1, -1, -1}; #include /* These identify the driver base version and may not be removed. */ -static char version[] __devinitdata = +static char version[] = KERN_INFO DRV_NAME ".c:v" DRV_VERSION " (2.4 port) " DRV_RELDATE " Donald Becker \n" KERN_INFO " http://www.scyld.com/network/drivers.html\n"; -- cgit v1.2.3-70-g09d2 From 90d5aed2d9c7d2f3915b75342988114fd7b6c13d Mon Sep 17 00:00:00 2001 From: Andrew Morton Date: Mon, 14 Aug 2006 23:00:09 -0700 Subject: [PATCH] fealnx section fix With CONFIG_HOTPLUG=n it won't compile: distcc[25607] ERROR: compile drivers/net/fealnx.c on g5/64 failed version[] is referred to from both __init code and from __devinit code, so move it out of __init altogether. Cc: Jeff Garzik Signed-off-by: Andrew Morton Signed-off-by: Jeff Garzik --- drivers/net/fealnx.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/net') diff --git a/drivers/net/fealnx.c b/drivers/net/fealnx.c index 97d34fee8c1..567e27413cf 100644 --- a/drivers/net/fealnx.c +++ b/drivers/net/fealnx.c @@ -92,7 +92,7 @@ static int full_duplex[MAX_UNITS] = { -1, -1, -1, -1, -1, -1, -1, -1 }; #include /* These identify the driver base version and may not be removed. */ -static char version[] __devinitdata = +static char version[] = KERN_INFO DRV_NAME ".c:v" DRV_VERSION " " DRV_RELDATE "\n"; -- cgit v1.2.3-70-g09d2 From 3418e469ebaebec16f7df83074087eb901fb76b9 Mon Sep 17 00:00:00 2001 From: Andrew Morton Date: Mon, 14 Aug 2006 23:00:10 -0700 Subject: [PATCH] sundance section fix drivers/net/sundance.c:110: error: version causes a section type conflict I don't understand this error. It's referred to from both __init and __devinit code. With CONFIG_HOTPLUG=n, version[] is placed in .init.data and is referred to from .init.text. Cc: Jeff Garzik Signed-off-by: Andrew Morton Signed-off-by: Jeff Garzik --- drivers/net/sundance.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/net') diff --git a/drivers/net/sundance.c b/drivers/net/sundance.c index ac17377b3e9..698568e751d 100644 --- a/drivers/net/sundance.c +++ b/drivers/net/sundance.c @@ -107,7 +107,7 @@ static char *media[MAX_UNITS]; #endif /* These identify the driver base version and may not be removed. */ -static char version[] __devinitdata = +static char version[] = KERN_INFO DRV_NAME ".c:v" DRV_VERSION " " DRV_RELDATE " Written by Donald Becker\n" KERN_INFO " http://www.scyld.com/network/sundance.html\n"; -- cgit v1.2.3-70-g09d2 From e4c780b1ffc7d7bc27b7dc57fcf17ebb8d3006bc Mon Sep 17 00:00:00 2001 From: Adrian Bunk Date: Mon, 14 Aug 2006 23:00:10 -0700 Subject: [PATCH] drivers/net/e1000/: possible cleanups - make needlessly global functions static - #if 0 the following unused global functions: - e1000_hw.c: e1000_mc_addr_list_update() - e1000_hw.c: e1000_read_reg_io() - e1000_hw.c: e1000_enable_pciex_master() - e1000_hw.c: e1000_ife_disable_dynamic_power_down() - e1000_hw.c: e1000_ife_enable_dynamic_power_down() - e1000_hw.c: e1000_write_ich8_word() - e1000_hw.c: e1000_duplex_reversal() - e1000_main.c: e1000_io_read() Signed-off-by: Adrian Bunk Cc: John Ronciak Cc: Jesse Brandeburg Cc: Jeff Kirsher Cc: Auke Kok Signed-off-by: Andrew Morton Signed-off-by: Jeff Garzik --- drivers/net/e1000/e1000_hw.c | 89 ++++++++++++++++++++++++++++++------------ drivers/net/e1000/e1000_hw.h | 32 --------------- drivers/net/e1000/e1000_main.c | 2 + 3 files changed, 67 insertions(+), 56 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/e1000/e1000_hw.c b/drivers/net/e1000/e1000_hw.c index 583518ae49c..b3b919116e0 100644 --- a/drivers/net/e1000/e1000_hw.c +++ b/drivers/net/e1000/e1000_hw.c @@ -105,6 +105,33 @@ static int32_t e1000_configure_kmrn_for_10_100(struct e1000_hw *hw, uint16_t duplex); static int32_t e1000_configure_kmrn_for_1000(struct e1000_hw *hw); +static int32_t e1000_erase_ich8_4k_segment(struct e1000_hw *hw, + uint32_t segment); +static int32_t e1000_get_software_flag(struct e1000_hw *hw); +static int32_t e1000_get_software_semaphore(struct e1000_hw *hw); +static int32_t e1000_init_lcd_from_nvm(struct e1000_hw *hw); +static int32_t e1000_kumeran_lock_loss_workaround(struct e1000_hw *hw); +static int32_t e1000_read_eeprom_ich8(struct e1000_hw *hw, uint16_t offset, + uint16_t words, uint16_t *data); +static int32_t e1000_read_ich8_byte(struct e1000_hw *hw, uint32_t index, + uint8_t* data); +static int32_t e1000_read_ich8_word(struct e1000_hw *hw, uint32_t index, + uint16_t *data); +static int32_t e1000_read_kmrn_reg(struct e1000_hw *hw, uint32_t reg_addr, + uint16_t *data); +static void e1000_release_software_flag(struct e1000_hw *hw); +static void e1000_release_software_semaphore(struct e1000_hw *hw); +static int32_t e1000_set_pci_ex_no_snoop(struct e1000_hw *hw, + uint32_t no_snoop); +static int32_t e1000_verify_write_ich8_byte(struct e1000_hw *hw, + uint32_t index, uint8_t byte); +static int32_t e1000_write_eeprom_ich8(struct e1000_hw *hw, uint16_t offset, + uint16_t words, uint16_t *data); +static int32_t e1000_write_ich8_byte(struct e1000_hw *hw, uint32_t index, + uint8_t data); +static int32_t e1000_write_kmrn_reg(struct e1000_hw *hw, uint32_t reg_addr, + uint16_t data); + /* IGP cable length table */ static const uint16_t e1000_igp_cable_length_table[IGP01E1000_AGC_LENGTH_TABLE_SIZE] = @@ -3233,7 +3260,7 @@ e1000_shift_in_mdi_bits(struct e1000_hw *hw) return data; } -int32_t +static int32_t e1000_swfw_sync_acquire(struct e1000_hw *hw, uint16_t mask) { uint32_t swfw_sync = 0; @@ -3277,7 +3304,7 @@ e1000_swfw_sync_acquire(struct e1000_hw *hw, uint16_t mask) return E1000_SUCCESS; } -void +static void e1000_swfw_sync_release(struct e1000_hw *hw, uint16_t mask) { uint32_t swfw_sync; @@ -3575,7 +3602,7 @@ e1000_write_phy_reg_ex(struct e1000_hw *hw, return E1000_SUCCESS; } -int32_t +static int32_t e1000_read_kmrn_reg(struct e1000_hw *hw, uint32_t reg_addr, uint16_t *data) @@ -3608,7 +3635,7 @@ e1000_read_kmrn_reg(struct e1000_hw *hw, return E1000_SUCCESS; } -int32_t +static int32_t e1000_write_kmrn_reg(struct e1000_hw *hw, uint32_t reg_addr, uint16_t data) @@ -3839,7 +3866,7 @@ e1000_phy_powerdown_workaround(struct e1000_hw *hw) * * hw - struct containing variables accessed by shared code ******************************************************************************/ -int32_t +static int32_t e1000_kumeran_lock_loss_workaround(struct e1000_hw *hw) { int32_t ret_val; @@ -4086,7 +4113,7 @@ e1000_phy_igp_get_info(struct e1000_hw *hw, * hw - Struct containing variables accessed by shared code * phy_info - PHY information structure ******************************************************************************/ -int32_t +static int32_t e1000_phy_ife_get_info(struct e1000_hw *hw, struct e1000_phy_info *phy_info) { @@ -5643,6 +5670,7 @@ e1000_init_rx_addrs(struct e1000_hw *hw) * for the first 15 multicast addresses, and hashes the rest into the * multicast table. *****************************************************************************/ +#if 0 void e1000_mc_addr_list_update(struct e1000_hw *hw, uint8_t *mc_addr_list, @@ -5719,6 +5747,7 @@ e1000_mc_addr_list_update(struct e1000_hw *hw, } DEBUGOUT("MC Update Complete\n"); } +#endif /* 0 */ /****************************************************************************** * Hashes an address to determine its location in the multicast table @@ -6587,6 +6616,7 @@ e1000_get_bus_info(struct e1000_hw *hw) * hw - Struct containing variables accessed by shared code * offset - offset to read from *****************************************************************************/ +#if 0 uint32_t e1000_read_reg_io(struct e1000_hw *hw, uint32_t offset) @@ -6597,6 +6627,7 @@ e1000_read_reg_io(struct e1000_hw *hw, e1000_io_write(hw, io_addr, offset); return e1000_io_read(hw, io_data); } +#endif /* 0 */ /****************************************************************************** * Writes a value to one of the devices registers using port I/O (as opposed to @@ -7909,6 +7940,7 @@ e1000_set_pci_express_master_disable(struct e1000_hw *hw) * returns: - none. * ***************************************************************************/ +#if 0 void e1000_enable_pciex_master(struct e1000_hw *hw) { @@ -7923,6 +7955,7 @@ e1000_enable_pciex_master(struct e1000_hw *hw) ctrl &= ~E1000_CTRL_GIO_MASTER_DISABLE; E1000_WRITE_REG(hw, CTRL, ctrl); } +#endif /* 0 */ /******************************************************************************* * @@ -8148,7 +8181,7 @@ e1000_put_hw_eeprom_semaphore(struct e1000_hw *hw) * E1000_SUCCESS at any other case. * ***************************************************************************/ -int32_t +static int32_t e1000_get_software_semaphore(struct e1000_hw *hw) { int32_t timeout = hw->eeprom.word_size + 1; @@ -8183,7 +8216,7 @@ e1000_get_software_semaphore(struct e1000_hw *hw) * hw: Struct containing variables accessed by shared code * ***************************************************************************/ -void +static void e1000_release_software_semaphore(struct e1000_hw *hw) { uint32_t swsm; @@ -8265,7 +8298,7 @@ e1000_arc_subsystem_valid(struct e1000_hw *hw) * returns: E1000_SUCCESS * *****************************************************************************/ -int32_t +static int32_t e1000_set_pci_ex_no_snoop(struct e1000_hw *hw, uint32_t no_snoop) { uint32_t gcr_reg = 0; @@ -8306,7 +8339,7 @@ e1000_set_pci_ex_no_snoop(struct e1000_hw *hw, uint32_t no_snoop) * hw: Struct containing variables accessed by shared code * ***************************************************************************/ -int32_t +static int32_t e1000_get_software_flag(struct e1000_hw *hw) { int32_t timeout = PHY_CFG_TIMEOUT; @@ -8345,7 +8378,7 @@ e1000_get_software_flag(struct e1000_hw *hw) * hw: Struct containing variables accessed by shared code * ***************************************************************************/ -void +static void e1000_release_software_flag(struct e1000_hw *hw) { uint32_t extcnf_ctrl; @@ -8369,6 +8402,7 @@ e1000_release_software_flag(struct e1000_hw *hw) * hw: Struct containing variables accessed by shared code * ***************************************************************************/ +#if 0 int32_t e1000_ife_disable_dynamic_power_down(struct e1000_hw *hw) { @@ -8388,6 +8422,7 @@ e1000_ife_disable_dynamic_power_down(struct e1000_hw *hw) return ret_val; } +#endif /* 0 */ /*************************************************************************** * @@ -8397,6 +8432,7 @@ e1000_ife_disable_dynamic_power_down(struct e1000_hw *hw) * hw: Struct containing variables accessed by shared code * ***************************************************************************/ +#if 0 int32_t e1000_ife_enable_dynamic_power_down(struct e1000_hw *hw) { @@ -8416,6 +8452,7 @@ e1000_ife_enable_dynamic_power_down(struct e1000_hw *hw) return ret_val; } +#endif /* 0 */ /****************************************************************************** * Reads a 16 bit word or words from the EEPROM using the ICH8's flash access @@ -8426,7 +8463,7 @@ e1000_ife_enable_dynamic_power_down(struct e1000_hw *hw) * data - word read from the EEPROM * words - number of words to read *****************************************************************************/ -int32_t +static int32_t e1000_read_eeprom_ich8(struct e1000_hw *hw, uint16_t offset, uint16_t words, uint16_t *data) { @@ -8482,7 +8519,7 @@ e1000_read_eeprom_ich8(struct e1000_hw *hw, uint16_t offset, uint16_t words, * words - number of words to write * data - words to write to the EEPROM *****************************************************************************/ -int32_t +static int32_t e1000_write_eeprom_ich8(struct e1000_hw *hw, uint16_t offset, uint16_t words, uint16_t *data) { @@ -8529,7 +8566,7 @@ e1000_write_eeprom_ich8(struct e1000_hw *hw, uint16_t offset, uint16_t words, * * hw - The pointer to the hw structure ****************************************************************************/ -int32_t +static int32_t e1000_ich8_cycle_init(struct e1000_hw *hw) { union ich8_hws_flash_status hsfsts; @@ -8596,7 +8633,7 @@ e1000_ich8_cycle_init(struct e1000_hw *hw) * * hw - The pointer to the hw structure ****************************************************************************/ -int32_t +static int32_t e1000_ich8_flash_cycle(struct e1000_hw *hw, uint32_t timeout) { union ich8_hws_flash_ctrl hsflctl; @@ -8631,7 +8668,7 @@ e1000_ich8_flash_cycle(struct e1000_hw *hw, uint32_t timeout) * size - Size of data to read, 1=byte 2=word * data - Pointer to the word to store the value read. *****************************************************************************/ -int32_t +static int32_t e1000_read_ich8_data(struct e1000_hw *hw, uint32_t index, uint32_t size, uint16_t* data) { @@ -8710,7 +8747,7 @@ e1000_read_ich8_data(struct e1000_hw *hw, uint32_t index, * size - Size of data to read, 1=byte 2=word * data - The byte(s) to write to the NVM. *****************************************************************************/ -int32_t +static int32_t e1000_write_ich8_data(struct e1000_hw *hw, uint32_t index, uint32_t size, uint16_t data) { @@ -8785,7 +8822,7 @@ e1000_write_ich8_data(struct e1000_hw *hw, uint32_t index, uint32_t size, * index - The index of the byte to read. * data - Pointer to a byte to store the value read. *****************************************************************************/ -int32_t +static int32_t e1000_read_ich8_byte(struct e1000_hw *hw, uint32_t index, uint8_t* data) { int32_t status = E1000_SUCCESS; @@ -8808,7 +8845,7 @@ e1000_read_ich8_byte(struct e1000_hw *hw, uint32_t index, uint8_t* data) * index - The index of the byte to write. * byte - The byte to write to the NVM. *****************************************************************************/ -int32_t +static int32_t e1000_verify_write_ich8_byte(struct e1000_hw *hw, uint32_t index, uint8_t byte) { int32_t error = E1000_SUCCESS; @@ -8839,7 +8876,7 @@ e1000_verify_write_ich8_byte(struct e1000_hw *hw, uint32_t index, uint8_t byte) * index - The index of the byte to read. * data - The byte to write to the NVM. *****************************************************************************/ -int32_t +static int32_t e1000_write_ich8_byte(struct e1000_hw *hw, uint32_t index, uint8_t data) { int32_t status = E1000_SUCCESS; @@ -8857,7 +8894,7 @@ e1000_write_ich8_byte(struct e1000_hw *hw, uint32_t index, uint8_t data) * index - The starting byte index of the word to read. * data - Pointer to a word to store the value read. *****************************************************************************/ -int32_t +static int32_t e1000_read_ich8_word(struct e1000_hw *hw, uint32_t index, uint16_t *data) { int32_t status = E1000_SUCCESS; @@ -8872,6 +8909,7 @@ e1000_read_ich8_word(struct e1000_hw *hw, uint32_t index, uint16_t *data) * index - The starting byte index of the word to read. * data - The word to write to the NVM. *****************************************************************************/ +#if 0 int32_t e1000_write_ich8_word(struct e1000_hw *hw, uint32_t index, uint16_t data) { @@ -8879,6 +8917,7 @@ e1000_write_ich8_word(struct e1000_hw *hw, uint32_t index, uint16_t data) status = e1000_write_ich8_data(hw, index, 2, data); return status; } +#endif /* 0 */ /****************************************************************************** * Erases the bank specified. Each bank is a 4k block. Segments are 0 based. @@ -8887,7 +8926,7 @@ e1000_write_ich8_word(struct e1000_hw *hw, uint32_t index, uint16_t data) * hw - pointer to e1000_hw structure * segment - 0 for first segment, 1 for second segment, etc. *****************************************************************************/ -int32_t +static int32_t e1000_erase_ich8_4k_segment(struct e1000_hw *hw, uint32_t segment) { union ich8_hws_flash_status hsfsts; @@ -8984,6 +9023,7 @@ e1000_erase_ich8_4k_segment(struct e1000_hw *hw, uint32_t segment) * hw: Struct containing variables accessed by shared code * *****************************************************************************/ +#if 0 int32_t e1000_duplex_reversal(struct e1000_hw *hw) { @@ -9012,8 +9052,9 @@ e1000_duplex_reversal(struct e1000_hw *hw) return ret_val; } +#endif /* 0 */ -int32_t +static int32_t e1000_init_lcd_from_nvm_config_region(struct e1000_hw *hw, uint32_t cnf_base_addr, uint32_t cnf_size) { @@ -9047,7 +9088,7 @@ e1000_init_lcd_from_nvm_config_region(struct e1000_hw *hw, } -int32_t +static int32_t e1000_init_lcd_from_nvm(struct e1000_hw *hw) { uint32_t reg_data, cnf_base_addr, cnf_size, ret_val, loop; diff --git a/drivers/net/e1000/e1000_hw.h b/drivers/net/e1000/e1000_hw.h index f9341e3276b..375b95518c3 100644 --- a/drivers/net/e1000/e1000_hw.h +++ b/drivers/net/e1000/e1000_hw.h @@ -323,13 +323,8 @@ int32_t e1000_write_phy_reg(struct e1000_hw *hw, uint32_t reg_addr, uint16_t dat int32_t e1000_phy_hw_reset(struct e1000_hw *hw); int32_t e1000_phy_reset(struct e1000_hw *hw); void e1000_phy_powerdown_workaround(struct e1000_hw *hw); -int32_t e1000_kumeran_lock_loss_workaround(struct e1000_hw *hw); -int32_t e1000_init_lcd_from_nvm_config_region(struct e1000_hw *hw, uint32_t cnf_base_addr, uint32_t cnf_size); -int32_t e1000_init_lcd_from_nvm(struct e1000_hw *hw); int32_t e1000_phy_get_info(struct e1000_hw *hw, struct e1000_phy_info *phy_info); int32_t e1000_validate_mdi_setting(struct e1000_hw *hw); -int32_t e1000_read_kmrn_reg(struct e1000_hw *hw, uint32_t reg_addr, uint16_t *data); -int32_t e1000_write_kmrn_reg(struct e1000_hw *hw, uint32_t reg_addr, uint16_t data); /* EEPROM Functions */ int32_t e1000_init_eeprom_params(struct e1000_hw *hw); @@ -400,13 +395,8 @@ int32_t e1000_update_eeprom_checksum(struct e1000_hw *hw); int32_t e1000_write_eeprom(struct e1000_hw *hw, uint16_t reg, uint16_t words, uint16_t *data); int32_t e1000_read_part_num(struct e1000_hw *hw, uint32_t * part_num); int32_t e1000_read_mac_addr(struct e1000_hw * hw); -int32_t e1000_swfw_sync_acquire(struct e1000_hw *hw, uint16_t mask); -void e1000_swfw_sync_release(struct e1000_hw *hw, uint16_t mask); -void e1000_release_software_flag(struct e1000_hw *hw); -int32_t e1000_get_software_flag(struct e1000_hw *hw); /* Filters (multicast, vlan, receive) */ -void e1000_mc_addr_list_update(struct e1000_hw *hw, uint8_t * mc_addr_list, uint32_t mc_addr_count, uint32_t pad, uint32_t rar_used_count); uint32_t e1000_hash_mc_addr(struct e1000_hw *hw, uint8_t * mc_addr); void e1000_mta_set(struct e1000_hw *hw, uint32_t hash_value); void e1000_rar_set(struct e1000_hw *hw, uint8_t * mc_addr, uint32_t rar_index); @@ -431,31 +421,9 @@ void e1000_pci_clear_mwi(struct e1000_hw *hw); void e1000_read_pci_cfg(struct e1000_hw *hw, uint32_t reg, uint16_t * value); void e1000_write_pci_cfg(struct e1000_hw *hw, uint32_t reg, uint16_t * value); /* Port I/O is only supported on 82544 and newer */ -uint32_t e1000_io_read(struct e1000_hw *hw, unsigned long port); -uint32_t e1000_read_reg_io(struct e1000_hw *hw, uint32_t offset); void e1000_io_write(struct e1000_hw *hw, unsigned long port, uint32_t value); -void e1000_enable_pciex_master(struct e1000_hw *hw); int32_t e1000_disable_pciex_master(struct e1000_hw *hw); -int32_t e1000_get_software_semaphore(struct e1000_hw *hw); -void e1000_release_software_semaphore(struct e1000_hw *hw); int32_t e1000_check_phy_reset_block(struct e1000_hw *hw); -int32_t e1000_set_pci_ex_no_snoop(struct e1000_hw *hw, uint32_t no_snoop); - -int32_t e1000_read_ich8_byte(struct e1000_hw *hw, uint32_t index, - uint8_t *data); -int32_t e1000_verify_write_ich8_byte(struct e1000_hw *hw, uint32_t index, - uint8_t byte); -int32_t e1000_write_ich8_byte(struct e1000_hw *hw, uint32_t index, - uint8_t byte); -int32_t e1000_read_ich8_word(struct e1000_hw *hw, uint32_t index, - uint16_t *data); -int32_t e1000_read_ich8_data(struct e1000_hw *hw, uint32_t index, - uint32_t size, uint16_t *data); -int32_t e1000_read_eeprom_ich8(struct e1000_hw *hw, uint16_t offset, - uint16_t words, uint16_t *data); -int32_t e1000_write_eeprom_ich8(struct e1000_hw *hw, uint16_t offset, - uint16_t words, uint16_t *data); -int32_t e1000_erase_ich8_4k_segment(struct e1000_hw *hw, uint32_t segment); #define E1000_READ_REG_IO(a, reg) \ diff --git a/drivers/net/e1000/e1000_main.c b/drivers/net/e1000/e1000_main.c index 627f224d78b..726f43d5593 100644 --- a/drivers/net/e1000/e1000_main.c +++ b/drivers/net/e1000/e1000_main.c @@ -4386,11 +4386,13 @@ e1000_write_pci_cfg(struct e1000_hw *hw, uint32_t reg, uint16_t *value) pci_write_config_word(adapter->pdev, reg, *value); } +#if 0 uint32_t e1000_io_read(struct e1000_hw *hw, unsigned long port) { return inl(port); } +#endif /* 0 */ void e1000_io_write(struct e1000_hw *hw, unsigned long port, uint32_t value) -- cgit v1.2.3-70-g09d2 From ce973b141dfac4a0f160c7435d65e3ea47753ce8 Mon Sep 17 00:00:00 2001 From: Li Yang Date: Mon, 14 Aug 2006 23:00:11 -0700 Subject: [PATCH] Freescale QE UCC gigabit ethernet driver QE(QUICC Engine) is a new generation communication coprocessor, which can be found on some of the latest Freescale PowerQUICC CPUs(e.g. MPC8360). The UCC(Unified Communications Controller) module of QE can work as gigabit Ethernet device. This patch provides driver for the device. Signed-off-by: Shlomi Gridish Signed-off-by: Li Yang Signed-off-by: Andrew Morton Signed-off-by: Jeff Garzik --- drivers/net/Kconfig | 27 + drivers/net/Makefile | 3 + drivers/net/ucc_geth.c | 4278 ++++++++++++++++++++++++++++++++++++++++++++ drivers/net/ucc_geth.h | 1339 ++++++++++++++ drivers/net/ucc_geth_phy.c | 801 +++++++++ drivers/net/ucc_geth_phy.h | 217 +++ 6 files changed, 6665 insertions(+) create mode 100644 drivers/net/ucc_geth.c create mode 100644 drivers/net/ucc_geth.h create mode 100644 drivers/net/ucc_geth_phy.c create mode 100644 drivers/net/ucc_geth_phy.h (limited to 'drivers/net') diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig index 39189903e35..ea1796e767b 100644 --- a/drivers/net/Kconfig +++ b/drivers/net/Kconfig @@ -2219,6 +2219,33 @@ config GFAR_NAPI bool "NAPI Support" depends on GIANFAR +config UCC_GETH + tristate "Freescale QE UCC GETH" + depends on QUICC_ENGINE && UCC_FAST + help + This driver supports the Gigabit Ethernet mode of QE UCC. + QE can be found on MPC836x CPUs. + +config UGETH_NAPI + bool "NAPI Support" + depends on UCC_GETH + +config UGETH_MAGIC_PACKET + bool "Magic Packet detection support" + depends on UCC_GETH + +config UGETH_FILTERING + bool "Mac address filtering support" + depends on UCC_GETH + +config UGETH_TX_ON_DEMOND + bool "Transmit on Demond support" + depends on UCC_GETH + +config UGETH_HAS_GIGA + bool + depends on UCC_GETH && MPC836x + config MV643XX_ETH tristate "MV-643XX Ethernet support" depends on MOMENCO_OCELOT_C || MOMENCO_JAGUAR_ATX || MV64360 || MOMENCO_OCELOT_3 || PPC_MULTIPLATFORM diff --git a/drivers/net/Makefile b/drivers/net/Makefile index c91e95126f7..8427bf9dec9 100644 --- a/drivers/net/Makefile +++ b/drivers/net/Makefile @@ -18,6 +18,9 @@ gianfar_driver-objs := gianfar.o \ gianfar_mii.o \ gianfar_sysfs.o +obj-$(CONFIG_UCC_GETH) += ucc_geth_driver.o +ucc_geth_driver-objs := ucc_geth.o ucc_geth_phy.o + # # link order important here # diff --git a/drivers/net/ucc_geth.c b/drivers/net/ucc_geth.c new file mode 100644 index 00000000000..47f49ef72bd --- /dev/null +++ b/drivers/net/ucc_geth.c @@ -0,0 +1,4278 @@ +/* + * Copyright (C) Freescale Semicondutor, Inc. 2006. All rights reserved. + * + * Author: Shlomi Gridish + * + * Description: + * QE UCC Gigabit Ethernet Driver + * + * Changelog: + * Jul 6, 2006 Li Yang + * - Rearrange code and style fixes + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include +#include +#include + +#include "ucc_geth.h" +#include "ucc_geth_phy.h" + +#undef DEBUG + +#define DRV_DESC "QE UCC Gigabit Ethernet Controller version:June 20, 2006" +#define DRV_NAME "ucc_geth" + +#define ugeth_printk(level, format, arg...) \ + printk(level format "\n", ## arg) + +#define ugeth_dbg(format, arg...) \ + ugeth_printk(KERN_DEBUG , format , ## arg) +#define ugeth_err(format, arg...) \ + ugeth_printk(KERN_ERR , format , ## arg) +#define ugeth_info(format, arg...) \ + ugeth_printk(KERN_INFO , format , ## arg) +#define ugeth_warn(format, arg...) \ + ugeth_printk(KERN_WARNING , format , ## arg) + +#ifdef UGETH_VERBOSE_DEBUG +#define ugeth_vdbg ugeth_dbg +#else +#define ugeth_vdbg(fmt, args...) do { } while (0) +#endif /* UGETH_VERBOSE_DEBUG */ + +static DEFINE_SPINLOCK(ugeth_lock); + +static ucc_geth_info_t ugeth_primary_info = { + .uf_info = { + .bd_mem_part = MEM_PART_SYSTEM, + .rtsm = UCC_FAST_SEND_IDLES_BETWEEN_FRAMES, + .max_rx_buf_length = 1536, +/* FIXME: should be changed in run time for 1G and 100M */ +#ifdef CONFIG_UGETH_HAS_GIGA + .urfs = UCC_GETH_URFS_GIGA_INIT, + .urfet = UCC_GETH_URFET_GIGA_INIT, + .urfset = UCC_GETH_URFSET_GIGA_INIT, + .utfs = UCC_GETH_UTFS_GIGA_INIT, + .utfet = UCC_GETH_UTFET_GIGA_INIT, + .utftt = UCC_GETH_UTFTT_GIGA_INIT, +#else + .urfs = UCC_GETH_URFS_INIT, + .urfet = UCC_GETH_URFET_INIT, + .urfset = UCC_GETH_URFSET_INIT, + .utfs = UCC_GETH_UTFS_INIT, + .utfet = UCC_GETH_UTFET_INIT, + .utftt = UCC_GETH_UTFTT_INIT, +#endif + .ufpt = 256, + .mode = UCC_FAST_PROTOCOL_MODE_ETHERNET, + .ttx_trx = UCC_FAST_GUMR_TRANSPARENT_TTX_TRX_NORMAL, + .tenc = UCC_FAST_TX_ENCODING_NRZ, + .renc = UCC_FAST_RX_ENCODING_NRZ, + .tcrc = UCC_FAST_16_BIT_CRC, + .synl = UCC_FAST_SYNC_LEN_NOT_USED, + }, + .numQueuesTx = 1, + .numQueuesRx = 1, + .extendedFilteringChainPointer = ((uint32_t) NULL), + .typeorlen = 3072 /*1536 */ , + .nonBackToBackIfgPart1 = 0x40, + .nonBackToBackIfgPart2 = 0x60, + .miminumInterFrameGapEnforcement = 0x50, + .backToBackInterFrameGap = 0x60, + .mblinterval = 128, + .nortsrbytetime = 5, + .fracsiz = 1, + .strictpriorityq = 0xff, + .altBebTruncation = 0xa, + .excessDefer = 1, + .maxRetransmission = 0xf, + .collisionWindow = 0x37, + .receiveFlowControl = 1, + .maxGroupAddrInHash = 4, + .maxIndAddrInHash = 4, + .prel = 7, + .maxFrameLength = 1518, + .minFrameLength = 64, + .maxD1Length = 1520, + .maxD2Length = 1520, + .vlantype = 0x8100, + .ecamptr = ((uint32_t) NULL), + .eventRegMask = UCCE_OTHER, + .pausePeriod = 0xf000, + .interruptcoalescingmaxvalue = {1, 1, 1, 1, 1, 1, 1, 1}, + .bdRingLenTx = { + TX_BD_RING_LEN, + TX_BD_RING_LEN, + TX_BD_RING_LEN, + TX_BD_RING_LEN, + TX_BD_RING_LEN, + TX_BD_RING_LEN, + TX_BD_RING_LEN, + TX_BD_RING_LEN}, + + .bdRingLenRx = { + RX_BD_RING_LEN, + RX_BD_RING_LEN, + RX_BD_RING_LEN, + RX_BD_RING_LEN, + RX_BD_RING_LEN, + RX_BD_RING_LEN, + RX_BD_RING_LEN, + RX_BD_RING_LEN}, + + .numStationAddresses = UCC_GETH_NUM_OF_STATION_ADDRESSES_1, + .largestexternallookupkeysize = + QE_FLTR_LARGEST_EXTERNAL_TABLE_LOOKUP_KEY_SIZE_NONE, + .statisticsMode = UCC_GETH_STATISTICS_GATHERING_MODE_NONE, + .vlanOperationTagged = UCC_GETH_VLAN_OPERATION_TAGGED_NOP, + .vlanOperationNonTagged = UCC_GETH_VLAN_OPERATION_NON_TAGGED_NOP, + .rxQoSMode = UCC_GETH_QOS_MODE_DEFAULT, + .aufc = UPSMR_AUTOMATIC_FLOW_CONTROL_MODE_NONE, + .padAndCrc = MACCFG2_PAD_AND_CRC_MODE_PAD_AND_CRC, + .numThreadsTx = UCC_GETH_NUM_OF_THREADS_4, + .numThreadsRx = UCC_GETH_NUM_OF_THREADS_4, + .riscTx = QE_RISC_ALLOCATION_RISC1_AND_RISC2, + .riscRx = QE_RISC_ALLOCATION_RISC1_AND_RISC2, +}; + +static ucc_geth_info_t ugeth_info[8]; + +#ifdef DEBUG +static void mem_disp(u8 *addr, int size) +{ + u8 *i; + int size16Aling = (size >> 4) << 4; + int size4Aling = (size >> 2) << 2; + int notAlign = 0; + if (size % 16) + notAlign = 1; + + for (i = addr; (u32) i < (u32) addr + size16Aling; i += 16) + printk("0x%08x: %08x %08x %08x %08x\r\n", + (u32) i, + *((u32 *) (i)), + *((u32 *) (i + 4)), + *((u32 *) (i + 8)), *((u32 *) (i + 12))); + if (notAlign == 1) + printk("0x%08x: ", (u32) i); + for (; (u32) i < (u32) addr + size4Aling; i += 4) + printk("%08x ", *((u32 *) (i))); + for (; (u32) i < (u32) addr + size; i++) + printk("%02x", *((u8 *) (i))); + if (notAlign == 1) + printk("\r\n"); +} +#endif /* DEBUG */ + +#ifdef CONFIG_UGETH_FILTERING +static void enqueue(struct list_head *node, struct list_head *lh) +{ + unsigned long flags; + + spin_lock_irqsave(ugeth_lock, flags); + list_add_tail(node, lh); + spin_unlock_irqrestore(ugeth_lock, flags); +} +#endif /* CONFIG_UGETH_FILTERING */ + +static struct list_head *dequeue(struct list_head *lh) +{ + unsigned long flags; + + spin_lock_irqsave(ugeth_lock, flags); + if (!list_empty(lh)) { + struct list_head *node = lh->next; + list_del(node); + spin_unlock_irqrestore(ugeth_lock, flags); + return node; + } else { + spin_unlock_irqrestore(ugeth_lock, flags); + return NULL; + } +} + +static int get_interface_details(enet_interface_e enet_interface, + enet_speed_e *speed, + int *r10m, + int *rmm, + int *rpm, + int *tbi, int *limited_to_full_duplex) +{ + /* Analyze enet_interface according to Interface Mode + Configuration table */ + switch (enet_interface) { + case ENET_10_MII: + *speed = ENET_SPEED_10BT; + break; + case ENET_10_RMII: + *speed = ENET_SPEED_10BT; + *r10m = 1; + *rmm = 1; + break; + case ENET_10_RGMII: + *speed = ENET_SPEED_10BT; + *rpm = 1; + *r10m = 1; + *limited_to_full_duplex = 1; + break; + case ENET_100_MII: + *speed = ENET_SPEED_100BT; + break; + case ENET_100_RMII: + *speed = ENET_SPEED_100BT; + *rmm = 1; + break; + case ENET_100_RGMII: + *speed = ENET_SPEED_100BT; + *rpm = 1; + *limited_to_full_duplex = 1; + break; + case ENET_1000_GMII: + *speed = ENET_SPEED_1000BT; + *limited_to_full_duplex = 1; + break; + case ENET_1000_RGMII: + *speed = ENET_SPEED_1000BT; + *rpm = 1; + *limited_to_full_duplex = 1; + break; + case ENET_1000_TBI: + *speed = ENET_SPEED_1000BT; + *tbi = 1; + *limited_to_full_duplex = 1; + break; + case ENET_1000_RTBI: + *speed = ENET_SPEED_1000BT; + *rpm = 1; + *tbi = 1; + *limited_to_full_duplex = 1; + break; + default: + return -EINVAL; + break; + } + + return 0; +} + +static struct sk_buff *get_new_skb(ucc_geth_private_t *ugeth, u8 *bd) +{ + struct sk_buff *skb = NULL; + + skb = dev_alloc_skb(ugeth->ug_info->uf_info.max_rx_buf_length + + UCC_GETH_RX_DATA_BUF_ALIGNMENT); + + if (skb == NULL) + return NULL; + + /* We need the data buffer to be aligned properly. We will reserve + * as many bytes as needed to align the data properly + */ + skb_reserve(skb, + UCC_GETH_RX_DATA_BUF_ALIGNMENT - + (((unsigned)skb->data) & (UCC_GETH_RX_DATA_BUF_ALIGNMENT - + 1))); + + skb->dev = ugeth->dev; + + BD_BUFFER_SET(bd, + dma_map_single(NULL, + skb->data, + ugeth->ug_info->uf_info.max_rx_buf_length + + UCC_GETH_RX_DATA_BUF_ALIGNMENT, + DMA_FROM_DEVICE)); + + BD_STATUS_AND_LENGTH_SET(bd, + (R_E | R_I | + (BD_STATUS_AND_LENGTH(bd) & R_W))); + + return skb; +} + +static int rx_bd_buffer_set(ucc_geth_private_t *ugeth, u8 rxQ) +{ + u8 *bd; + u32 bd_status; + struct sk_buff *skb; + int i; + + bd = ugeth->p_rx_bd_ring[rxQ]; + i = 0; + + do { + bd_status = BD_STATUS_AND_LENGTH(bd); + skb = get_new_skb(ugeth, bd); + + if (!skb) /* If can not allocate data buffer, + abort. Cleanup will be elsewhere */ + return -ENOMEM; + + ugeth->rx_skbuff[rxQ][i] = skb; + + /* advance the BD pointer */ + bd += UCC_GETH_SIZE_OF_BD; + i++; + } while (!(bd_status & R_W)); + + return 0; +} + +static int fill_init_enet_entries(ucc_geth_private_t *ugeth, + volatile u32 *p_start, + u8 num_entries, + u32 thread_size, + u32 thread_alignment, + qe_risc_allocation_e risc, + int skip_page_for_first_entry) +{ + u32 init_enet_offset; + u8 i; + int snum; + + for (i = 0; i < num_entries; i++) { + if ((snum = qe_get_snum()) < 0) { + ugeth_err("fill_init_enet_entries: Can not get SNUM."); + return snum; + } + if ((i == 0) && skip_page_for_first_entry) + /* First entry of Rx does not have page */ + init_enet_offset = 0; + else { + init_enet_offset = + qe_muram_alloc(thread_size, thread_alignment); + if (IS_MURAM_ERR(init_enet_offset)) { + ugeth_err + ("fill_init_enet_entries: Can not allocate DPRAM memory."); + qe_put_snum((u8) snum); + return -ENOMEM; + } + } + *(p_start++) = + ((u8) snum << ENET_INIT_PARAM_SNUM_SHIFT) | init_enet_offset + | risc; + } + + return 0; +} + +static int return_init_enet_entries(ucc_geth_private_t *ugeth, + volatile u32 *p_start, + u8 num_entries, + qe_risc_allocation_e risc, + int skip_page_for_first_entry) +{ + u32 init_enet_offset; + u8 i; + int snum; + + for (i = 0; i < num_entries; i++) { + /* Check that this entry was actually valid -- + needed in case failed in allocations */ + if ((*p_start & ENET_INIT_PARAM_RISC_MASK) == risc) { + snum = + (u32) (*p_start & ENET_INIT_PARAM_SNUM_MASK) >> + ENET_INIT_PARAM_SNUM_SHIFT; + qe_put_snum((u8) snum); + if (!((i == 0) && skip_page_for_first_entry)) { + /* First entry of Rx does not have page */ + init_enet_offset = + (in_be32(p_start) & + ENET_INIT_PARAM_PTR_MASK); + qe_muram_free(init_enet_offset); + } + *(p_start++) = 0; /* Just for cosmetics */ + } + } + + return 0; +} + +#ifdef DEBUG +static int dump_init_enet_entries(ucc_geth_private_t *ugeth, + volatile u32 *p_start, + u8 num_entries, + u32 thread_size, + qe_risc_allocation_e risc, + int skip_page_for_first_entry) +{ + u32 init_enet_offset; + u8 i; + int snum; + + for (i = 0; i < num_entries; i++) { + /* Check that this entry was actually valid -- + needed in case failed in allocations */ + if ((*p_start & ENET_INIT_PARAM_RISC_MASK) == risc) { + snum = + (u32) (*p_start & ENET_INIT_PARAM_SNUM_MASK) >> + ENET_INIT_PARAM_SNUM_SHIFT; + qe_put_snum((u8) snum); + if (!((i == 0) && skip_page_for_first_entry)) { + /* First entry of Rx does not have page */ + init_enet_offset = + (in_be32(p_start) & + ENET_INIT_PARAM_PTR_MASK); + ugeth_info("Init enet entry %d:", i); + ugeth_info("Base address: 0x%08x", + (u32) + qe_muram_addr(init_enet_offset)); + mem_disp(qe_muram_addr(init_enet_offset), + thread_size); + } + p_start++; + } + } + + return 0; +} +#endif + +#ifdef CONFIG_UGETH_FILTERING +static enet_addr_container_t *get_enet_addr_container(void) +{ + enet_addr_container_t *enet_addr_cont; + + /* allocate memory */ + enet_addr_cont = kmalloc(sizeof(enet_addr_container_t), GFP_KERNEL); + if (!enet_addr_cont) { + ugeth_err("%s: No memory for enet_addr_container_t object.", + __FUNCTION__); + return NULL; + } + + return enet_addr_cont; +} +#endif /* CONFIG_UGETH_FILTERING */ + +static void put_enet_addr_container(enet_addr_container_t *enet_addr_cont) +{ + kfree(enet_addr_cont); +} + +#ifdef CONFIG_UGETH_FILTERING +static int hw_add_addr_in_paddr(ucc_geth_private_t *ugeth, + enet_addr_t *p_enet_addr, u8 paddr_num) +{ + ucc_geth_82xx_address_filtering_pram_t *p_82xx_addr_filt; + + if (!(paddr_num < NUM_OF_PADDRS)) { + ugeth_warn("%s: Illagel paddr_num.", __FUNCTION__); + return -EINVAL; + } + + p_82xx_addr_filt = + (ucc_geth_82xx_address_filtering_pram_t *) ugeth->p_rx_glbl_pram-> + addressfiltering; + + /* Ethernet frames are defined in Little Endian mode, */ + /* therefore to insert the address we reverse the bytes. */ + out_be16(&p_82xx_addr_filt->paddr[paddr_num].h, + (u16) (((u16) (((u16) ((*p_enet_addr)[5])) << 8)) | + (u16) (*p_enet_addr)[4])); + out_be16(&p_82xx_addr_filt->paddr[paddr_num].m, + (u16) (((u16) (((u16) ((*p_enet_addr)[3])) << 8)) | + (u16) (*p_enet_addr)[2])); + out_be16(&p_82xx_addr_filt->paddr[paddr_num].l, + (u16) (((u16) (((u16) ((*p_enet_addr)[1])) << 8)) | + (u16) (*p_enet_addr)[0])); + + return 0; +} +#endif /* CONFIG_UGETH_FILTERING */ + +static int hw_clear_addr_in_paddr(ucc_geth_private_t *ugeth, u8 paddr_num) +{ + ucc_geth_82xx_address_filtering_pram_t *p_82xx_addr_filt; + + if (!(paddr_num < NUM_OF_PADDRS)) { + ugeth_warn("%s: Illagel paddr_num.", __FUNCTION__); + return -EINVAL; + } + + p_82xx_addr_filt = + (ucc_geth_82xx_address_filtering_pram_t *) ugeth->p_rx_glbl_pram-> + addressfiltering; + + /* Writing address ff.ff.ff.ff.ff.ff disables address + recognition for this register */ + out_be16(&p_82xx_addr_filt->paddr[paddr_num].h, 0xffff); + out_be16(&p_82xx_addr_filt->paddr[paddr_num].m, 0xffff); + out_be16(&p_82xx_addr_filt->paddr[paddr_num].l, 0xffff); + + return 0; +} + +static void hw_add_addr_in_hash(ucc_geth_private_t *ugeth, + enet_addr_t *p_enet_addr) +{ + ucc_geth_82xx_address_filtering_pram_t *p_82xx_addr_filt; + u32 cecr_subblock; + + p_82xx_addr_filt = + (ucc_geth_82xx_address_filtering_pram_t *) ugeth->p_rx_glbl_pram-> + addressfiltering; + + cecr_subblock = + ucc_fast_get_qe_cr_subblock(ugeth->ug_info->uf_info.ucc_num); + + /* Ethernet frames are defined in Little Endian mode, + therefor to insert */ + /* the address to the hash (Big Endian mode), we reverse the bytes.*/ + out_be16(&p_82xx_addr_filt->taddr.h, + (u16) (((u16) (((u16) ((*p_enet_addr)[5])) << 8)) | + (u16) (*p_enet_addr)[4])); + out_be16(&p_82xx_addr_filt->taddr.m, + (u16) (((u16) (((u16) ((*p_enet_addr)[3])) << 8)) | + (u16) (*p_enet_addr)[2])); + out_be16(&p_82xx_addr_filt->taddr.l, + (u16) (((u16) (((u16) ((*p_enet_addr)[1])) << 8)) | + (u16) (*p_enet_addr)[0])); + + qe_issue_cmd(QE_SET_GROUP_ADDRESS, cecr_subblock, + (u8) QE_CR_PROTOCOL_ETHERNET, 0); +} + +#ifdef CONFIG_UGETH_MAGIC_PACKET +static void magic_packet_detection_enable(ucc_geth_private_t *ugeth) +{ + ucc_fast_private_t *uccf; + ucc_geth_t *ug_regs; + u32 maccfg2, uccm; + + uccf = ugeth->uccf; + ug_regs = ugeth->ug_regs; + + /* Enable interrupts for magic packet detection */ + uccm = in_be32(uccf->p_uccm); + uccm |= UCCE_MPD; + out_be32(uccf->p_uccm, uccm); + + /* Enable magic packet detection */ + maccfg2 = in_be32(&ug_regs->maccfg2); + maccfg2 |= MACCFG2_MPE; + out_be32(&ug_regs->maccfg2, maccfg2); +} + +static void magic_packet_detection_disable(ucc_geth_private_t *ugeth) +{ + ucc_fast_private_t *uccf; + ucc_geth_t *ug_regs; + u32 maccfg2, uccm; + + uccf = ugeth->uccf; + ug_regs = ugeth->ug_regs; + + /* Disable interrupts for magic packet detection */ + uccm = in_be32(uccf->p_uccm); + uccm &= ~UCCE_MPD; + out_be32(uccf->p_uccm, uccm); + + /* Disable magic packet detection */ + maccfg2 = in_be32(&ug_regs->maccfg2); + maccfg2 &= ~MACCFG2_MPE; + out_be32(&ug_regs->maccfg2, maccfg2); +} +#endif /* MAGIC_PACKET */ + +static inline int compare_addr(enet_addr_t *addr1, enet_addr_t *addr2) +{ + return memcmp(addr1, addr2, ENET_NUM_OCTETS_PER_ADDRESS); +} + +#ifdef DEBUG +static void get_statistics(ucc_geth_private_t *ugeth, + ucc_geth_tx_firmware_statistics_t * + tx_firmware_statistics, + ucc_geth_rx_firmware_statistics_t * + rx_firmware_statistics, + ucc_geth_hardware_statistics_t *hardware_statistics) +{ + ucc_fast_t *uf_regs; + ucc_geth_t *ug_regs; + ucc_geth_tx_firmware_statistics_pram_t *p_tx_fw_statistics_pram; + ucc_geth_rx_firmware_statistics_pram_t *p_rx_fw_statistics_pram; + + ug_regs = ugeth->ug_regs; + uf_regs = (ucc_fast_t *) ug_regs; + p_tx_fw_statistics_pram = ugeth->p_tx_fw_statistics_pram; + p_rx_fw_statistics_pram = ugeth->p_rx_fw_statistics_pram; + + /* Tx firmware only if user handed pointer and driver actually + gathers Tx firmware statistics */ + if (tx_firmware_statistics && p_tx_fw_statistics_pram) { + tx_firmware_statistics->sicoltx = + in_be32(&p_tx_fw_statistics_pram->sicoltx); + tx_firmware_statistics->mulcoltx = + in_be32(&p_tx_fw_statistics_pram->mulcoltx); + tx_firmware_statistics->latecoltxfr = + in_be32(&p_tx_fw_statistics_pram->latecoltxfr); + tx_firmware_statistics->frabortduecol = + in_be32(&p_tx_fw_statistics_pram->frabortduecol); + tx_firmware_statistics->frlostinmactxer = + in_be32(&p_tx_fw_statistics_pram->frlostinmactxer); + tx_firmware_statistics->carriersenseertx = + in_be32(&p_tx_fw_statistics_pram->carriersenseertx); + tx_firmware_statistics->frtxok = + in_be32(&p_tx_fw_statistics_pram->frtxok); + tx_firmware_statistics->txfrexcessivedefer = + in_be32(&p_tx_fw_statistics_pram->txfrexcessivedefer); + tx_firmware_statistics->txpkts256 = + in_be32(&p_tx_fw_statistics_pram->txpkts256); + tx_firmware_statistics->txpkts512 = + in_be32(&p_tx_fw_statistics_pram->txpkts512); + tx_firmware_statistics->txpkts1024 = + in_be32(&p_tx_fw_statistics_pram->txpkts1024); + tx_firmware_statistics->txpktsjumbo = + in_be32(&p_tx_fw_statistics_pram->txpktsjumbo); + } + + /* Rx firmware only if user handed pointer and driver actually + * gathers Rx firmware statistics */ + if (rx_firmware_statistics && p_rx_fw_statistics_pram) { + int i; + rx_firmware_statistics->frrxfcser = + in_be32(&p_rx_fw_statistics_pram->frrxfcser); + rx_firmware_statistics->fraligner = + in_be32(&p_rx_fw_statistics_pram->fraligner); + rx_firmware_statistics->inrangelenrxer = + in_be32(&p_rx_fw_statistics_pram->inrangelenrxer); + rx_firmware_statistics->outrangelenrxer = + in_be32(&p_rx_fw_statistics_pram->outrangelenrxer); + rx_firmware_statistics->frtoolong = + in_be32(&p_rx_fw_statistics_pram->frtoolong); + rx_firmware_statistics->runt = + in_be32(&p_rx_fw_statistics_pram->runt); + rx_firmware_statistics->verylongevent = + in_be32(&p_rx_fw_statistics_pram->verylongevent); + rx_firmware_statistics->symbolerror = + in_be32(&p_rx_fw_statistics_pram->symbolerror); + rx_firmware_statistics->dropbsy = + in_be32(&p_rx_fw_statistics_pram->dropbsy); + for (i = 0; i < 0x8; i++) + rx_firmware_statistics->res0[i] = + p_rx_fw_statistics_pram->res0[i]; + rx_firmware_statistics->mismatchdrop = + in_be32(&p_rx_fw_statistics_pram->mismatchdrop); + rx_firmware_statistics->underpkts = + in_be32(&p_rx_fw_statistics_pram->underpkts); + rx_firmware_statistics->pkts256 = + in_be32(&p_rx_fw_statistics_pram->pkts256); + rx_firmware_statistics->pkts512 = + in_be32(&p_rx_fw_statistics_pram->pkts512); + rx_firmware_statistics->pkts1024 = + in_be32(&p_rx_fw_statistics_pram->pkts1024); + rx_firmware_statistics->pktsjumbo = + in_be32(&p_rx_fw_statistics_pram->pktsjumbo); + rx_firmware_statistics->frlossinmacer = + in_be32(&p_rx_fw_statistics_pram->frlossinmacer); + rx_firmware_statistics->pausefr = + in_be32(&p_rx_fw_statistics_pram->pausefr); + for (i = 0; i < 0x4; i++) + rx_firmware_statistics->res1[i] = + p_rx_fw_statistics_pram->res1[i]; + rx_firmware_statistics->removevlan = + in_be32(&p_rx_fw_statistics_pram->removevlan); + rx_firmware_statistics->replacevlan = + in_be32(&p_rx_fw_statistics_pram->replacevlan); + rx_firmware_statistics->insertvlan = + in_be32(&p_rx_fw_statistics_pram->insertvlan); + } + + /* Hardware only if user handed pointer and driver actually + gathers hardware statistics */ + if (hardware_statistics && (in_be32(&uf_regs->upsmr) & UPSMR_HSE)) { + hardware_statistics->tx64 = in_be32(&ug_regs->tx64); + hardware_statistics->tx127 = in_be32(&ug_regs->tx127); + hardware_statistics->tx255 = in_be32(&ug_regs->tx255); + hardware_statistics->rx64 = in_be32(&ug_regs->rx64); + hardware_statistics->rx127 = in_be32(&ug_regs->rx127); + hardware_statistics->rx255 = in_be32(&ug_regs->rx255); + hardware_statistics->txok = in_be32(&ug_regs->txok); + hardware_statistics->txcf = in_be16(&ug_regs->txcf); + hardware_statistics->tmca = in_be32(&ug_regs->tmca); + hardware_statistics->tbca = in_be32(&ug_regs->tbca); + hardware_statistics->rxfok = in_be32(&ug_regs->rxfok); + hardware_statistics->rxbok = in_be32(&ug_regs->rxbok); + hardware_statistics->rbyt = in_be32(&ug_regs->rbyt); + hardware_statistics->rmca = in_be32(&ug_regs->rmca); + hardware_statistics->rbca = in_be32(&ug_regs->rbca); + } +} + +static void dump_bds(ucc_geth_private_t *ugeth) +{ + int i; + int length; + + for (i = 0; i < ugeth->ug_info->numQueuesTx; i++) { + if (ugeth->p_tx_bd_ring[i]) { + length = + (ugeth->ug_info->bdRingLenTx[i] * + UCC_GETH_SIZE_OF_BD); + ugeth_info("TX BDs[%d]", i); + mem_disp(ugeth->p_tx_bd_ring[i], length); + } + } + for (i = 0; i < ugeth->ug_info->numQueuesRx; i++) { + if (ugeth->p_rx_bd_ring[i]) { + length = + (ugeth->ug_info->bdRingLenRx[i] * + UCC_GETH_SIZE_OF_BD); + ugeth_info("RX BDs[%d]", i); + mem_disp(ugeth->p_rx_bd_ring[i], length); + } + } +} + +static void dump_regs(ucc_geth_private_t *ugeth) +{ + int i; + + ugeth_info("UCC%d Geth registers:", ugeth->ug_info->uf_info.ucc_num); + ugeth_info("Base address: 0x%08x", (u32) ugeth->ug_regs); + + ugeth_info("maccfg1 : addr - 0x%08x, val - 0x%08x", + (u32) & ugeth->ug_regs->maccfg1, + in_be32(&ugeth->ug_regs->maccfg1)); + ugeth_info("maccfg2 : addr - 0x%08x, val - 0x%08x", + (u32) & ugeth->ug_regs->maccfg2, + in_be32(&ugeth->ug_regs->maccfg2)); + ugeth_info("ipgifg : addr - 0x%08x, val - 0x%08x", + (u32) & ugeth->ug_regs->ipgifg, + in_be32(&ugeth->ug_regs->ipgifg)); + ugeth_info("hafdup : addr - 0x%08x, val - 0x%08x", + (u32) & ugeth->ug_regs->hafdup, + in_be32(&ugeth->ug_regs->hafdup)); + ugeth_info("miimcfg : addr - 0x%08x, val - 0x%08x", + (u32) & ugeth->ug_regs->miimng.miimcfg, + in_be32(&ugeth->ug_regs->miimng.miimcfg)); + ugeth_info("miimcom : addr - 0x%08x, val - 0x%08x", + (u32) & ugeth->ug_regs->miimng.miimcom, + in_be32(&ugeth->ug_regs->miimng.miimcom)); + ugeth_info("miimadd : addr - 0x%08x, val - 0x%08x", + (u32) & ugeth->ug_regs->miimng.miimadd, + in_be32(&ugeth->ug_regs->miimng.miimadd)); + ugeth_info("miimcon : addr - 0x%08x, val - 0x%08x", + (u32) & ugeth->ug_regs->miimng.miimcon, + in_be32(&ugeth->ug_regs->miimng.miimcon)); + ugeth_info("miimstat : addr - 0x%08x, val - 0x%08x", + (u32) & ugeth->ug_regs->miimng.miimstat, + in_be32(&ugeth->ug_regs->miimng.miimstat)); + ugeth_info("miimmind : addr - 0x%08x, val - 0x%08x", + (u32) & ugeth->ug_regs->miimng.miimind, + in_be32(&ugeth->ug_regs->miimng.miimind)); + ugeth_info("ifctl : addr - 0x%08x, val - 0x%08x", + (u32) & ugeth->ug_regs->ifctl, + in_be32(&ugeth->ug_regs->ifctl)); + ugeth_info("ifstat : addr - 0x%08x, val - 0x%08x", + (u32) & ugeth->ug_regs->ifstat, + in_be32(&ugeth->ug_regs->ifstat)); + ugeth_info("macstnaddr1: addr - 0x%08x, val - 0x%08x", + (u32) & ugeth->ug_regs->macstnaddr1, + in_be32(&ugeth->ug_regs->macstnaddr1)); + ugeth_info("macstnaddr2: addr - 0x%08x, val - 0x%08x", + (u32) & ugeth->ug_regs->macstnaddr2, + in_be32(&ugeth->ug_regs->macstnaddr2)); + ugeth_info("uempr : addr - 0x%08x, val - 0x%08x", + (u32) & ugeth->ug_regs->uempr, + in_be32(&ugeth->ug_regs->uempr)); + ugeth_info("utbipar : addr - 0x%08x, val - 0x%08x", + (u32) & ugeth->ug_regs->utbipar, + in_be32(&ugeth->ug_regs->utbipar)); + ugeth_info("uescr : addr - 0x%08x, val - 0x%04x", + (u32) & ugeth->ug_regs->uescr, + in_be16(&ugeth->ug_regs->uescr)); + ugeth_info("tx64 : addr - 0x%08x, val - 0x%08x", + (u32) & ugeth->ug_regs->tx64, + in_be32(&ugeth->ug_regs->tx64)); + ugeth_info("tx127 : addr - 0x%08x, val - 0x%08x", + (u32) & ugeth->ug_regs->tx127, + in_be32(&ugeth->ug_regs->tx127)); + ugeth_info("tx255 : addr - 0x%08x, val - 0x%08x", + (u32) & ugeth->ug_regs->tx255, + in_be32(&ugeth->ug_regs->tx255)); + ugeth_info("rx64 : addr - 0x%08x, val - 0x%08x", + (u32) & ugeth->ug_regs->rx64, + in_be32(&ugeth->ug_regs->rx64)); + ugeth_info("rx127 : addr - 0x%08x, val - 0x%08x", + (u32) & ugeth->ug_regs->rx127, + in_be32(&ugeth->ug_regs->rx127)); + ugeth_info("rx255 : addr - 0x%08x, val - 0x%08x", + (u32) & ugeth->ug_regs->rx255, + in_be32(&ugeth->ug_regs->rx255)); + ugeth_info("txok : addr - 0x%08x, val - 0x%08x", + (u32) & ugeth->ug_regs->txok, + in_be32(&ugeth->ug_regs->txok)); + ugeth_info("txcf : addr - 0x%08x, val - 0x%04x", + (u32) & ugeth->ug_regs->txcf, + in_be16(&ugeth->ug_regs->txcf)); + ugeth_info("tmca : addr - 0x%08x, val - 0x%08x", + (u32) & ugeth->ug_regs->tmca, + in_be32(&ugeth->ug_regs->tmca)); + ugeth_info("tbca : addr - 0x%08x, val - 0x%08x", + (u32) & ugeth->ug_regs->tbca, + in_be32(&ugeth->ug_regs->tbca)); + ugeth_info("rxfok : addr - 0x%08x, val - 0x%08x", + (u32) & ugeth->ug_regs->rxfok, + in_be32(&ugeth->ug_regs->rxfok)); + ugeth_info("rxbok : addr - 0x%08x, val - 0x%08x", + (u32) & ugeth->ug_regs->rxbok, + in_be32(&ugeth->ug_regs->rxbok)); + ugeth_info("rbyt : addr - 0x%08x, val - 0x%08x", + (u32) & ugeth->ug_regs->rbyt, + in_be32(&ugeth->ug_regs->rbyt)); + ugeth_info("rmca : addr - 0x%08x, val - 0x%08x", + (u32) & ugeth->ug_regs->rmca, + in_be32(&ugeth->ug_regs->rmca)); + ugeth_info("rbca : addr - 0x%08x, val - 0x%08x", + (u32) & ugeth->ug_regs->rbca, + in_be32(&ugeth->ug_regs->rbca)); + ugeth_info("scar : addr - 0x%08x, val - 0x%08x", + (u32) & ugeth->ug_regs->scar, + in_be32(&ugeth->ug_regs->scar)); + ugeth_info("scam : addr - 0x%08x, val - 0x%08x", + (u32) & ugeth->ug_regs->scam, + in_be32(&ugeth->ug_regs->scam)); + + if (ugeth->p_thread_data_tx) { + int numThreadsTxNumerical; + switch (ugeth->ug_info->numThreadsTx) { + case UCC_GETH_NUM_OF_THREADS_1: + numThreadsTxNumerical = 1; + break; + case UCC_GETH_NUM_OF_THREADS_2: + numThreadsTxNumerical = 2; + break; + case UCC_GETH_NUM_OF_THREADS_4: + numThreadsTxNumerical = 4; + break; + case UCC_GETH_NUM_OF_THREADS_6: + numThreadsTxNumerical = 6; + break; + case UCC_GETH_NUM_OF_THREADS_8: + numThreadsTxNumerical = 8; + break; + default: + numThreadsTxNumerical = 0; + break; + } + + ugeth_info("Thread data TXs:"); + ugeth_info("Base address: 0x%08x", + (u32) ugeth->p_thread_data_tx); + for (i = 0; i < numThreadsTxNumerical; i++) { + ugeth_info("Thread data TX[%d]:", i); + ugeth_info("Base address: 0x%08x", + (u32) & ugeth->p_thread_data_tx[i]); + mem_disp((u8 *) & ugeth->p_thread_data_tx[i], + sizeof(ucc_geth_thread_data_tx_t)); + } + } + if (ugeth->p_thread_data_rx) { + int numThreadsRxNumerical; + switch (ugeth->ug_info->numThreadsRx) { + case UCC_GETH_NUM_OF_THREADS_1: + numThreadsRxNumerical = 1; + break; + case UCC_GETH_NUM_OF_THREADS_2: + numThreadsRxNumerical = 2; + break; + case UCC_GETH_NUM_OF_THREADS_4: + numThreadsRxNumerical = 4; + break; + case UCC_GETH_NUM_OF_THREADS_6: + numThreadsRxNumerical = 6; + break; + case UCC_GETH_NUM_OF_THREADS_8: + numThreadsRxNumerical = 8; + break; + default: + numThreadsRxNumerical = 0; + break; + } + + ugeth_info("Thread data RX:"); + ugeth_info("Base address: 0x%08x", + (u32) ugeth->p_thread_data_rx); + for (i = 0; i < numThreadsRxNumerical; i++) { + ugeth_info("Thread data RX[%d]:", i); + ugeth_info("Base address: 0x%08x", + (u32) & ugeth->p_thread_data_rx[i]); + mem_disp((u8 *) & ugeth->p_thread_data_rx[i], + sizeof(ucc_geth_thread_data_rx_t)); + } + } + if (ugeth->p_exf_glbl_param) { + ugeth_info("EXF global param:"); + ugeth_info("Base address: 0x%08x", + (u32) ugeth->p_exf_glbl_param); + mem_disp((u8 *) ugeth->p_exf_glbl_param, + sizeof(*ugeth->p_exf_glbl_param)); + } + if (ugeth->p_tx_glbl_pram) { + ugeth_info("TX global param:"); + ugeth_info("Base address: 0x%08x", (u32) ugeth->p_tx_glbl_pram); + ugeth_info("temoder : addr - 0x%08x, val - 0x%04x", + (u32) & ugeth->p_tx_glbl_pram->temoder, + in_be16(&ugeth->p_tx_glbl_pram->temoder)); + ugeth_info("sqptr : addr - 0x%08x, val - 0x%08x", + (u32) & ugeth->p_tx_glbl_pram->sqptr, + in_be32(&ugeth->p_tx_glbl_pram->sqptr)); + ugeth_info("schedulerbasepointer: addr - 0x%08x, val - 0x%08x", + (u32) & ugeth->p_tx_glbl_pram->schedulerbasepointer, + in_be32(&ugeth->p_tx_glbl_pram-> + schedulerbasepointer)); + ugeth_info("txrmonbaseptr: addr - 0x%08x, val - 0x%08x", + (u32) & ugeth->p_tx_glbl_pram->txrmonbaseptr, + in_be32(&ugeth->p_tx_glbl_pram->txrmonbaseptr)); + ugeth_info("tstate : addr - 0x%08x, val - 0x%08x", + (u32) & ugeth->p_tx_glbl_pram->tstate, + in_be32(&ugeth->p_tx_glbl_pram->tstate)); + ugeth_info("iphoffset[0] : addr - 0x%08x, val - 0x%02x", + (u32) & ugeth->p_tx_glbl_pram->iphoffset[0], + ugeth->p_tx_glbl_pram->iphoffset[0]); + ugeth_info("iphoffset[1] : addr - 0x%08x, val - 0x%02x", + (u32) & ugeth->p_tx_glbl_pram->iphoffset[1], + ugeth->p_tx_glbl_pram->iphoffset[1]); + ugeth_info("iphoffset[2] : addr - 0x%08x, val - 0x%02x", + (u32) & ugeth->p_tx_glbl_pram->iphoffset[2], + ugeth->p_tx_glbl_pram->iphoffset[2]); + ugeth_info("iphoffset[3] : addr - 0x%08x, val - 0x%02x", + (u32) & ugeth->p_tx_glbl_pram->iphoffset[3], + ugeth->p_tx_glbl_pram->iphoffset[3]); + ugeth_info("iphoffset[4] : addr - 0x%08x, val - 0x%02x", + (u32) & ugeth->p_tx_glbl_pram->iphoffset[4], + ugeth->p_tx_glbl_pram->iphoffset[4]); + ugeth_info("iphoffset[5] : addr - 0x%08x, val - 0x%02x", + (u32) & ugeth->p_tx_glbl_pram->iphoffset[5], + ugeth->p_tx_glbl_pram->iphoffset[5]); + ugeth_info("iphoffset[6] : addr - 0x%08x, val - 0x%02x", + (u32) & ugeth->p_tx_glbl_pram->iphoffset[6], + ugeth->p_tx_glbl_pram->iphoffset[6]); + ugeth_info("iphoffset[7] : addr - 0x%08x, val - 0x%02x", + (u32) & ugeth->p_tx_glbl_pram->iphoffset[7], + ugeth->p_tx_glbl_pram->iphoffset[7]); + ugeth_info("vtagtable[0] : addr - 0x%08x, val - 0x%08x", + (u32) & ugeth->p_tx_glbl_pram->vtagtable[0], + in_be32(&ugeth->p_tx_glbl_pram->vtagtable[0])); + ugeth_info("vtagtable[1] : addr - 0x%08x, val - 0x%08x", + (u32) & ugeth->p_tx_glbl_pram->vtagtable[1], + in_be32(&ugeth->p_tx_glbl_pram->vtagtable[1])); + ugeth_info("vtagtable[2] : addr - 0x%08x, val - 0x%08x", + (u32) & ugeth->p_tx_glbl_pram->vtagtable[2], + in_be32(&ugeth->p_tx_glbl_pram->vtagtable[2])); + ugeth_info("vtagtable[3] : addr - 0x%08x, val - 0x%08x", + (u32) & ugeth->p_tx_glbl_pram->vtagtable[3], + in_be32(&ugeth->p_tx_glbl_pram->vtagtable[3])); + ugeth_info("vtagtable[4] : addr - 0x%08x, val - 0x%08x", + (u32) & ugeth->p_tx_glbl_pram->vtagtable[4], + in_be32(&ugeth->p_tx_glbl_pram->vtagtable[4])); + ugeth_info("vtagtable[5] : addr - 0x%08x, val - 0x%08x", + (u32) & ugeth->p_tx_glbl_pram->vtagtable[5], + in_be32(&ugeth->p_tx_glbl_pram->vtagtable[5])); + ugeth_info("vtagtable[6] : addr - 0x%08x, val - 0x%08x", + (u32) & ugeth->p_tx_glbl_pram->vtagtable[6], + in_be32(&ugeth->p_tx_glbl_pram->vtagtable[6])); + ugeth_info("vtagtable[7] : addr - 0x%08x, val - 0x%08x", + (u32) & ugeth->p_tx_glbl_pram->vtagtable[7], + in_be32(&ugeth->p_tx_glbl_pram->vtagtable[7])); + ugeth_info("tqptr : addr - 0x%08x, val - 0x%08x", + (u32) & ugeth->p_tx_glbl_pram->tqptr, + in_be32(&ugeth->p_tx_glbl_pram->tqptr)); + } + if (ugeth->p_rx_glbl_pram) { + ugeth_info("RX global param:"); + ugeth_info("Base address: 0x%08x", (u32) ugeth->p_rx_glbl_pram); + ugeth_info("remoder : addr - 0x%08x, val - 0x%08x", + (u32) & ugeth->p_rx_glbl_pram->remoder, + in_be32(&ugeth->p_rx_glbl_pram->remoder)); + ugeth_info("rqptr : addr - 0x%08x, val - 0x%08x", + (u32) & ugeth->p_rx_glbl_pram->rqptr, + in_be32(&ugeth->p_rx_glbl_pram->rqptr)); + ugeth_info("typeorlen : addr - 0x%08x, val - 0x%04x", + (u32) & ugeth->p_rx_glbl_pram->typeorlen, + in_be16(&ugeth->p_rx_glbl_pram->typeorlen)); + ugeth_info("rxgstpack : addr - 0x%08x, val - 0x%02x", + (u32) & ugeth->p_rx_glbl_pram->rxgstpack, + ugeth->p_rx_glbl_pram->rxgstpack); + ugeth_info("rxrmonbaseptr : addr - 0x%08x, val - 0x%08x", + (u32) & ugeth->p_rx_glbl_pram->rxrmonbaseptr, + in_be32(&ugeth->p_rx_glbl_pram->rxrmonbaseptr)); + ugeth_info("intcoalescingptr: addr - 0x%08x, val - 0x%08x", + (u32) & ugeth->p_rx_glbl_pram->intcoalescingptr, + in_be32(&ugeth->p_rx_glbl_pram->intcoalescingptr)); + ugeth_info("rstate : addr - 0x%08x, val - 0x%02x", + (u32) & ugeth->p_rx_glbl_pram->rstate, + ugeth->p_rx_glbl_pram->rstate); + ugeth_info("mrblr : addr - 0x%08x, val - 0x%04x", + (u32) & ugeth->p_rx_glbl_pram->mrblr, + in_be16(&ugeth->p_rx_glbl_pram->mrblr)); + ugeth_info("rbdqptr : addr - 0x%08x, val - 0x%08x", + (u32) & ugeth->p_rx_glbl_pram->rbdqptr, + in_be32(&ugeth->p_rx_glbl_pram->rbdqptr)); + ugeth_info("mflr : addr - 0x%08x, val - 0x%04x", + (u32) & ugeth->p_rx_glbl_pram->mflr, + in_be16(&ugeth->p_rx_glbl_pram->mflr)); + ugeth_info("minflr : addr - 0x%08x, val - 0x%04x", + (u32) & ugeth->p_rx_glbl_pram->minflr, + in_be16(&ugeth->p_rx_glbl_pram->minflr)); + ugeth_info("maxd1 : addr - 0x%08x, val - 0x%04x", + (u32) & ugeth->p_rx_glbl_pram->maxd1, + in_be16(&ugeth->p_rx_glbl_pram->maxd1)); + ugeth_info("maxd2 : addr - 0x%08x, val - 0x%04x", + (u32) & ugeth->p_rx_glbl_pram->maxd2, + in_be16(&ugeth->p_rx_glbl_pram->maxd2)); + ugeth_info("ecamptr : addr - 0x%08x, val - 0x%08x", + (u32) & ugeth->p_rx_glbl_pram->ecamptr, + in_be32(&ugeth->p_rx_glbl_pram->ecamptr)); + ugeth_info("l2qt : addr - 0x%08x, val - 0x%08x", + (u32) & ugeth->p_rx_glbl_pram->l2qt, + in_be32(&ugeth->p_rx_glbl_pram->l2qt)); + ugeth_info("l3qt[0] : addr - 0x%08x, val - 0x%08x", + (u32) & ugeth->p_rx_glbl_pram->l3qt[0], + in_be32(&ugeth->p_rx_glbl_pram->l3qt[0])); + ugeth_info("l3qt[1] : addr - 0x%08x, val - 0x%08x", + (u32) & ugeth->p_rx_glbl_pram->l3qt[1], + in_be32(&ugeth->p_rx_glbl_pram->l3qt[1])); + ugeth_info("l3qt[2] : addr - 0x%08x, val - 0x%08x", + (u32) & ugeth->p_rx_glbl_pram->l3qt[2], + in_be32(&ugeth->p_rx_glbl_pram->l3qt[2])); + ugeth_info("l3qt[3] : addr - 0x%08x, val - 0x%08x", + (u32) & ugeth->p_rx_glbl_pram->l3qt[3], + in_be32(&ugeth->p_rx_glbl_pram->l3qt[3])); + ugeth_info("l3qt[4] : addr - 0x%08x, val - 0x%08x", + (u32) & ugeth->p_rx_glbl_pram->l3qt[4], + in_be32(&ugeth->p_rx_glbl_pram->l3qt[4])); + ugeth_info("l3qt[5] : addr - 0x%08x, val - 0x%08x", + (u32) & ugeth->p_rx_glbl_pram->l3qt[5], + in_be32(&ugeth->p_rx_glbl_pram->l3qt[5])); + ugeth_info("l3qt[6] : addr - 0x%08x, val - 0x%08x", + (u32) & ugeth->p_rx_glbl_pram->l3qt[6], + in_be32(&ugeth->p_rx_glbl_pram->l3qt[6])); + ugeth_info("l3qt[7] : addr - 0x%08x, val - 0x%08x", + (u32) & ugeth->p_rx_glbl_pram->l3qt[7], + in_be32(&ugeth->p_rx_glbl_pram->l3qt[7])); + ugeth_info("vlantype : addr - 0x%08x, val - 0x%04x", + (u32) & ugeth->p_rx_glbl_pram->vlantype, + in_be16(&ugeth->p_rx_glbl_pram->vlantype)); + ugeth_info("vlantci : addr - 0x%08x, val - 0x%04x", + (u32) & ugeth->p_rx_glbl_pram->vlantci, + in_be16(&ugeth->p_rx_glbl_pram->vlantci)); + for (i = 0; i < 64; i++) + ugeth_info + ("addressfiltering[%d]: addr - 0x%08x, val - 0x%02x", + i, + (u32) & ugeth->p_rx_glbl_pram->addressfiltering[i], + ugeth->p_rx_glbl_pram->addressfiltering[i]); + ugeth_info("exfGlobalParam : addr - 0x%08x, val - 0x%08x", + (u32) & ugeth->p_rx_glbl_pram->exfGlobalParam, + in_be32(&ugeth->p_rx_glbl_pram->exfGlobalParam)); + } + if (ugeth->p_send_q_mem_reg) { + ugeth_info("Send Q memory registers:"); + ugeth_info("Base address: 0x%08x", + (u32) ugeth->p_send_q_mem_reg); + for (i = 0; i < ugeth->ug_info->numQueuesTx; i++) { + ugeth_info("SQQD[%d]:", i); + ugeth_info("Base address: 0x%08x", + (u32) & ugeth->p_send_q_mem_reg->sqqd[i]); + mem_disp((u8 *) & ugeth->p_send_q_mem_reg->sqqd[i], + sizeof(ucc_geth_send_queue_qd_t)); + } + } + if (ugeth->p_scheduler) { + ugeth_info("Scheduler:"); + ugeth_info("Base address: 0x%08x", (u32) ugeth->p_scheduler); + mem_disp((u8 *) ugeth->p_scheduler, + sizeof(*ugeth->p_scheduler)); + } + if (ugeth->p_tx_fw_statistics_pram) { + ugeth_info("TX FW statistics pram:"); + ugeth_info("Base address: 0x%08x", + (u32) ugeth->p_tx_fw_statistics_pram); + mem_disp((u8 *) ugeth->p_tx_fw_statistics_pram, + sizeof(*ugeth->p_tx_fw_statistics_pram)); + } + if (ugeth->p_rx_fw_statistics_pram) { + ugeth_info("RX FW statistics pram:"); + ugeth_info("Base address: 0x%08x", + (u32) ugeth->p_rx_fw_statistics_pram); + mem_disp((u8 *) ugeth->p_rx_fw_statistics_pram, + sizeof(*ugeth->p_rx_fw_statistics_pram)); + } + if (ugeth->p_rx_irq_coalescing_tbl) { + ugeth_info("RX IRQ coalescing tables:"); + ugeth_info("Base address: 0x%08x", + (u32) ugeth->p_rx_irq_coalescing_tbl); + for (i = 0; i < ugeth->ug_info->numQueuesRx; i++) { + ugeth_info("RX IRQ coalescing table entry[%d]:", i); + ugeth_info("Base address: 0x%08x", + (u32) & ugeth->p_rx_irq_coalescing_tbl-> + coalescingentry[i]); + ugeth_info + ("interruptcoalescingmaxvalue: addr - 0x%08x, val - 0x%08x", + (u32) & ugeth->p_rx_irq_coalescing_tbl-> + coalescingentry[i].interruptcoalescingmaxvalue, + in_be32(&ugeth->p_rx_irq_coalescing_tbl-> + coalescingentry[i]. + interruptcoalescingmaxvalue)); + ugeth_info + ("interruptcoalescingcounter : addr - 0x%08x, val - 0x%08x", + (u32) & ugeth->p_rx_irq_coalescing_tbl-> + coalescingentry[i].interruptcoalescingcounter, + in_be32(&ugeth->p_rx_irq_coalescing_tbl-> + coalescingentry[i]. + interruptcoalescingcounter)); + } + } + if (ugeth->p_rx_bd_qs_tbl) { + ugeth_info("RX BD QS tables:"); + ugeth_info("Base address: 0x%08x", (u32) ugeth->p_rx_bd_qs_tbl); + for (i = 0; i < ugeth->ug_info->numQueuesRx; i++) { + ugeth_info("RX BD QS table[%d]:", i); + ugeth_info("Base address: 0x%08x", + (u32) & ugeth->p_rx_bd_qs_tbl[i]); + ugeth_info + ("bdbaseptr : addr - 0x%08x, val - 0x%08x", + (u32) & ugeth->p_rx_bd_qs_tbl[i].bdbaseptr, + in_be32(&ugeth->p_rx_bd_qs_tbl[i].bdbaseptr)); + ugeth_info + ("bdptr : addr - 0x%08x, val - 0x%08x", + (u32) & ugeth->p_rx_bd_qs_tbl[i].bdptr, + in_be32(&ugeth->p_rx_bd_qs_tbl[i].bdptr)); + ugeth_info + ("externalbdbaseptr: addr - 0x%08x, val - 0x%08x", + (u32) & ugeth->p_rx_bd_qs_tbl[i].externalbdbaseptr, + in_be32(&ugeth->p_rx_bd_qs_tbl[i]. + externalbdbaseptr)); + ugeth_info + ("externalbdptr : addr - 0x%08x, val - 0x%08x", + (u32) & ugeth->p_rx_bd_qs_tbl[i].externalbdptr, + in_be32(&ugeth->p_rx_bd_qs_tbl[i].externalbdptr)); + ugeth_info("ucode RX Prefetched BDs:"); + ugeth_info("Base address: 0x%08x", + (u32) + qe_muram_addr(in_be32 + (&ugeth->p_rx_bd_qs_tbl[i]. + bdbaseptr))); + mem_disp((u8 *) + qe_muram_addr(in_be32 + (&ugeth->p_rx_bd_qs_tbl[i]. + bdbaseptr)), + sizeof(ucc_geth_rx_prefetched_bds_t)); + } + } + if (ugeth->p_init_enet_param_shadow) { + int size; + ugeth_info("Init enet param shadow:"); + ugeth_info("Base address: 0x%08x", + (u32) ugeth->p_init_enet_param_shadow); + mem_disp((u8 *) ugeth->p_init_enet_param_shadow, + sizeof(*ugeth->p_init_enet_param_shadow)); + + size = sizeof(ucc_geth_thread_rx_pram_t); + if (ugeth->ug_info->rxExtendedFiltering) { + size += + THREAD_RX_PRAM_ADDITIONAL_FOR_EXTENDED_FILTERING; + if (ugeth->ug_info->largestexternallookupkeysize == + QE_FLTR_TABLE_LOOKUP_KEY_SIZE_8_BYTES) + size += + THREAD_RX_PRAM_ADDITIONAL_FOR_EXTENDED_FILTERING_8; + if (ugeth->ug_info->largestexternallookupkeysize == + QE_FLTR_TABLE_LOOKUP_KEY_SIZE_16_BYTES) + size += + THREAD_RX_PRAM_ADDITIONAL_FOR_EXTENDED_FILTERING_16; + } + + dump_init_enet_entries(ugeth, + &(ugeth->p_init_enet_param_shadow-> + txthread[0]), + ENET_INIT_PARAM_MAX_ENTRIES_TX, + sizeof(ucc_geth_thread_tx_pram_t), + ugeth->ug_info->riscTx, 0); + dump_init_enet_entries(ugeth, + &(ugeth->p_init_enet_param_shadow-> + rxthread[0]), + ENET_INIT_PARAM_MAX_ENTRIES_RX, size, + ugeth->ug_info->riscRx, 1); + } +} +#endif /* DEBUG */ + +static void init_default_reg_vals(volatile u32 *upsmr_register, + volatile u32 *maccfg1_register, + volatile u32 *maccfg2_register) +{ + out_be32(upsmr_register, UCC_GETH_UPSMR_INIT); + out_be32(maccfg1_register, UCC_GETH_MACCFG1_INIT); + out_be32(maccfg2_register, UCC_GETH_MACCFG2_INIT); +} + +static int init_half_duplex_params(int alt_beb, + int back_pressure_no_backoff, + int no_backoff, + int excess_defer, + u8 alt_beb_truncation, + u8 max_retransmissions, + u8 collision_window, + volatile u32 *hafdup_register) +{ + u32 value = 0; + + if ((alt_beb_truncation > HALFDUP_ALT_BEB_TRUNCATION_MAX) || + (max_retransmissions > HALFDUP_MAX_RETRANSMISSION_MAX) || + (collision_window > HALFDUP_COLLISION_WINDOW_MAX)) + return -EINVAL; + + value = (u32) (alt_beb_truncation << HALFDUP_ALT_BEB_TRUNCATION_SHIFT); + + if (alt_beb) + value |= HALFDUP_ALT_BEB; + if (back_pressure_no_backoff) + value |= HALFDUP_BACK_PRESSURE_NO_BACKOFF; + if (no_backoff) + value |= HALFDUP_NO_BACKOFF; + if (excess_defer) + value |= HALFDUP_EXCESSIVE_DEFER; + + value |= (max_retransmissions << HALFDUP_MAX_RETRANSMISSION_SHIFT); + + value |= collision_window; + + out_be32(hafdup_register, value); + return 0; +} + +static int init_inter_frame_gap_params(u8 non_btb_cs_ipg, + u8 non_btb_ipg, + u8 min_ifg, + u8 btb_ipg, + volatile u32 *ipgifg_register) +{ + u32 value = 0; + + /* Non-Back-to-back IPG part 1 should be <= Non-Back-to-back + IPG part 2 */ + if (non_btb_cs_ipg > non_btb_ipg) + return -EINVAL; + + if ((non_btb_cs_ipg > IPGIFG_NON_BACK_TO_BACK_IFG_PART1_MAX) || + (non_btb_ipg > IPGIFG_NON_BACK_TO_BACK_IFG_PART2_MAX) || + /*(min_ifg > IPGIFG_MINIMUM_IFG_ENFORCEMENT_MAX) || */ + (btb_ipg > IPGIFG_BACK_TO_BACK_IFG_MAX)) + return -EINVAL; + + value |= + ((non_btb_cs_ipg << IPGIFG_NON_BACK_TO_BACK_IFG_PART1_SHIFT) & + IPGIFG_NBTB_CS_IPG_MASK); + value |= + ((non_btb_ipg << IPGIFG_NON_BACK_TO_BACK_IFG_PART2_SHIFT) & + IPGIFG_NBTB_IPG_MASK); + value |= + ((min_ifg << IPGIFG_MINIMUM_IFG_ENFORCEMENT_SHIFT) & + IPGIFG_MIN_IFG_MASK); + value |= (btb_ipg & IPGIFG_BTB_IPG_MASK); + + out_be32(ipgifg_register, value); + return 0; +} + +static int init_flow_control_params(u32 automatic_flow_control_mode, + int rx_flow_control_enable, + int tx_flow_control_enable, + u16 pause_period, + u16 extension_field, + volatile u32 *upsmr_register, + volatile u32 *uempr_register, + volatile u32 *maccfg1_register) +{ + u32 value = 0; + + /* Set UEMPR register */ + value = (u32) pause_period << UEMPR_PAUSE_TIME_VALUE_SHIFT; + value |= (u32) extension_field << UEMPR_EXTENDED_PAUSE_TIME_VALUE_SHIFT; + out_be32(uempr_register, value); + + /* Set UPSMR register */ + value = in_be32(upsmr_register); + value |= automatic_flow_control_mode; + out_be32(upsmr_register, value); + + value = in_be32(maccfg1_register); + if (rx_flow_control_enable) + value |= MACCFG1_FLOW_RX; + if (tx_flow_control_enable) + value |= MACCFG1_FLOW_TX; + out_be32(maccfg1_register, value); + + return 0; +} + +static int init_hw_statistics_gathering_mode(int enable_hardware_statistics, + int auto_zero_hardware_statistics, + volatile u32 *upsmr_register, + volatile u16 *uescr_register) +{ + u32 upsmr_value = 0; + u16 uescr_value = 0; + /* Enable hardware statistics gathering if requested */ + if (enable_hardware_statistics) { + upsmr_value = in_be32(upsmr_register); + upsmr_value |= UPSMR_HSE; + out_be32(upsmr_register, upsmr_value); + } + + /* Clear hardware statistics counters */ + uescr_value = in_be16(uescr_register); + uescr_value |= UESCR_CLRCNT; + /* Automatically zero hardware statistics counters on read, + if requested */ + if (auto_zero_hardware_statistics) + uescr_value |= UESCR_AUTOZ; + out_be16(uescr_register, uescr_value); + + return 0; +} + +static int init_firmware_statistics_gathering_mode(int + enable_tx_firmware_statistics, + int enable_rx_firmware_statistics, + volatile u32 *tx_rmon_base_ptr, + u32 tx_firmware_statistics_structure_address, + volatile u32 *rx_rmon_base_ptr, + u32 rx_firmware_statistics_structure_address, + volatile u16 *temoder_register, + volatile u32 *remoder_register) +{ + /* Note: this function does not check if */ + /* the parameters it receives are NULL */ + u16 temoder_value; + u32 remoder_value; + + if (enable_tx_firmware_statistics) { + out_be32(tx_rmon_base_ptr, + tx_firmware_statistics_structure_address); + temoder_value = in_be16(temoder_register); + temoder_value |= TEMODER_TX_RMON_STATISTICS_ENABLE; + out_be16(temoder_register, temoder_value); + } + + if (enable_rx_firmware_statistics) { + out_be32(rx_rmon_base_ptr, + rx_firmware_statistics_structure_address); + remoder_value = in_be32(remoder_register); + remoder_value |= REMODER_RX_RMON_STATISTICS_ENABLE; + out_be32(remoder_register, remoder_value); + } + + return 0; +} + +static int init_mac_station_addr_regs(u8 address_byte_0, + u8 address_byte_1, + u8 address_byte_2, + u8 address_byte_3, + u8 address_byte_4, + u8 address_byte_5, + volatile u32 *macstnaddr1_register, + volatile u32 *macstnaddr2_register) +{ + u32 value = 0; + + /* Example: for a station address of 0x12345678ABCD, */ + /* 0x12 is byte 0, 0x34 is byte 1 and so on and 0xCD is byte 5 */ + + /* MACSTNADDR1 Register: */ + + /* 0 7 8 15 */ + /* station address byte 5 station address byte 4 */ + /* 16 23 24 31 */ + /* station address byte 3 station address byte 2 */ + value |= (u32) ((address_byte_2 << 0) & 0x000000FF); + value |= (u32) ((address_byte_3 << 8) & 0x0000FF00); + value |= (u32) ((address_byte_4 << 16) & 0x00FF0000); + value |= (u32) ((address_byte_5 << 24) & 0xFF000000); + + out_be32(macstnaddr1_register, value); + + /* MACSTNADDR2 Register: */ + + /* 0 7 8 15 */ + /* station address byte 1 station address byte 0 */ + /* 16 23 24 31 */ + /* reserved reserved */ + value = 0; + value |= (u32) ((address_byte_0 << 16) & 0x00FF0000); + value |= (u32) ((address_byte_1 << 24) & 0xFF000000); + + out_be32(macstnaddr2_register, value); + + return 0; +} + +static int init_mac_duplex_mode(int full_duplex, + int limited_to_full_duplex, + volatile u32 *maccfg2_register) +{ + u32 value = 0; + + /* some interfaces must work in full duplex mode */ + if ((full_duplex == 0) && (limited_to_full_duplex == 1)) + return -EINVAL; + + value = in_be32(maccfg2_register); + + if (full_duplex) + value |= MACCFG2_FDX; + else + value &= ~MACCFG2_FDX; + + out_be32(maccfg2_register, value); + return 0; +} + +static int init_check_frame_length_mode(int length_check, + volatile u32 *maccfg2_register) +{ + u32 value = 0; + + value = in_be32(maccfg2_register); + + if (length_check) + value |= MACCFG2_LC; + else + value &= ~MACCFG2_LC; + + out_be32(maccfg2_register, value); + return 0; +} + +static int init_preamble_length(u8 preamble_length, + volatile u32 *maccfg2_register) +{ + u32 value = 0; + + if ((preamble_length < 3) || (preamble_length > 7)) + return -EINVAL; + + value = in_be32(maccfg2_register); + value &= ~MACCFG2_PREL_MASK; + value |= (preamble_length << MACCFG2_PREL_SHIFT); + out_be32(maccfg2_register, value); + return 0; +} + +static int init_mii_management_configuration(int reset_mgmt, + int preamble_supress, + volatile u32 *miimcfg_register, + volatile u32 *miimind_register) +{ + unsigned int timeout = PHY_INIT_TIMEOUT; + u32 value = 0; + + value = in_be32(miimcfg_register); + if (reset_mgmt) { + value |= MIIMCFG_RESET_MANAGEMENT; + out_be32(miimcfg_register, value); + } + + value = 0; + + if (preamble_supress) + value |= MIIMCFG_NO_PREAMBLE; + + value |= UCC_GETH_MIIMCFG_MNGMNT_CLC_DIV_INIT; + out_be32(miimcfg_register, value); + + /* Wait until the bus is free */ + while ((in_be32(miimind_register) & MIIMIND_BUSY) && timeout--) + cpu_relax(); + + if (timeout <= 0) { + ugeth_err("%s: The MII Bus is stuck!", __FUNCTION__); + return -ETIMEDOUT; + } + + return 0; +} + +static int init_rx_parameters(int reject_broadcast, + int receive_short_frames, + int promiscuous, volatile u32 *upsmr_register) +{ + u32 value = 0; + + value = in_be32(upsmr_register); + + if (reject_broadcast) + value |= UPSMR_BRO; + else + value &= ~UPSMR_BRO; + + if (receive_short_frames) + value |= UPSMR_RSH; + else + value &= ~UPSMR_RSH; + + if (promiscuous) + value |= UPSMR_PRO; + else + value &= ~UPSMR_PRO; + + out_be32(upsmr_register, value); + + return 0; +} + +static int init_max_rx_buff_len(u16 max_rx_buf_len, + volatile u16 *mrblr_register) +{ + /* max_rx_buf_len value must be a multiple of 128 */ + if ((max_rx_buf_len == 0) + || (max_rx_buf_len % UCC_GETH_MRBLR_ALIGNMENT)) + return -EINVAL; + + out_be16(mrblr_register, max_rx_buf_len); + return 0; +} + +static int init_min_frame_len(u16 min_frame_length, + volatile u16 *minflr_register, + volatile u16 *mrblr_register) +{ + u16 mrblr_value = 0; + + mrblr_value = in_be16(mrblr_register); + if (min_frame_length >= (mrblr_value - 4)) + return -EINVAL; + + out_be16(minflr_register, min_frame_length); + return 0; +} + +static int adjust_enet_interface(ucc_geth_private_t *ugeth) +{ + ucc_geth_info_t *ug_info; + ucc_geth_t *ug_regs; + ucc_fast_t *uf_regs; + enet_speed_e speed; + int ret_val, rpm = 0, tbi = 0, r10m = 0, rmm = + 0, limited_to_full_duplex = 0; + u32 upsmr, maccfg2, utbipar, tbiBaseAddress; + u16 value; + + ugeth_vdbg("%s: IN", __FUNCTION__); + + ug_info = ugeth->ug_info; + ug_regs = ugeth->ug_regs; + uf_regs = ugeth->uccf->uf_regs; + + /* Analyze enet_interface according to Interface Mode Configuration + table */ + ret_val = + get_interface_details(ug_info->enet_interface, &speed, &r10m, &rmm, + &rpm, &tbi, &limited_to_full_duplex); + if (ret_val != 0) { + ugeth_err + ("%s: half duplex not supported in requested configuration.", + __FUNCTION__); + return ret_val; + } + + /* Set MACCFG2 */ + maccfg2 = in_be32(&ug_regs->maccfg2); + maccfg2 &= ~MACCFG2_INTERFACE_MODE_MASK; + if ((speed == ENET_SPEED_10BT) || (speed == ENET_SPEED_100BT)) + maccfg2 |= MACCFG2_INTERFACE_MODE_NIBBLE; + else if (speed == ENET_SPEED_1000BT) + maccfg2 |= MACCFG2_INTERFACE_MODE_BYTE; + maccfg2 |= ug_info->padAndCrc; + out_be32(&ug_regs->maccfg2, maccfg2); + + /* Set UPSMR */ + upsmr = in_be32(&uf_regs->upsmr); + upsmr &= ~(UPSMR_RPM | UPSMR_R10M | UPSMR_TBIM | UPSMR_RMM); + if (rpm) + upsmr |= UPSMR_RPM; + if (r10m) + upsmr |= UPSMR_R10M; + if (tbi) + upsmr |= UPSMR_TBIM; + if (rmm) + upsmr |= UPSMR_RMM; + out_be32(&uf_regs->upsmr, upsmr); + + /* Set UTBIPAR */ + utbipar = in_be32(&ug_regs->utbipar); + utbipar &= ~UTBIPAR_PHY_ADDRESS_MASK; + if (tbi) + utbipar |= + (ug_info->phy_address + + ugeth->ug_info->uf_info. + ucc_num) << UTBIPAR_PHY_ADDRESS_SHIFT; + else + utbipar |= + (0x10 + + ugeth->ug_info->uf_info. + ucc_num) << UTBIPAR_PHY_ADDRESS_SHIFT; + out_be32(&ug_regs->utbipar, utbipar); + + /* Disable autonegotiation in tbi mode, because by default it + comes up in autonegotiation mode. */ + /* Note that this depends on proper setting in utbipar register. */ + if (tbi) { + tbiBaseAddress = in_be32(&ug_regs->utbipar); + tbiBaseAddress &= UTBIPAR_PHY_ADDRESS_MASK; + tbiBaseAddress >>= UTBIPAR_PHY_ADDRESS_SHIFT; + value = + ugeth->mii_info->mdio_read(ugeth->dev, (u8) tbiBaseAddress, + ENET_TBI_MII_CR); + value &= ~0x1000; /* Turn off autonegotiation */ + ugeth->mii_info->mdio_write(ugeth->dev, (u8) tbiBaseAddress, + ENET_TBI_MII_CR, value); + } + + ret_val = init_mac_duplex_mode(1, + limited_to_full_duplex, + &ug_regs->maccfg2); + if (ret_val != 0) { + ugeth_err + ("%s: half duplex not supported in requested configuration.", + __FUNCTION__); + return ret_val; + } + + init_check_frame_length_mode(ug_info->lengthCheckRx, &ug_regs->maccfg2); + + ret_val = init_preamble_length(ug_info->prel, &ug_regs->maccfg2); + if (ret_val != 0) { + ugeth_err + ("%s: Preamble length must be between 3 and 7 inclusive.", + __FUNCTION__); + return ret_val; + } + + return 0; +} + +/* Called every time the controller might need to be made + * aware of new link state. The PHY code conveys this + * information through variables in the ugeth structure, and this + * function converts those variables into the appropriate + * register values, and can bring down the device if needed. + */ +static void adjust_link(struct net_device *dev) +{ + ucc_geth_private_t *ugeth = netdev_priv(dev); + ucc_geth_t *ug_regs; + u32 tempval; + struct ugeth_mii_info *mii_info = ugeth->mii_info; + + ug_regs = ugeth->ug_regs; + + if (mii_info->link) { + /* Now we make sure that we can be in full duplex mode. + * If not, we operate in half-duplex mode. */ + if (mii_info->duplex != ugeth->oldduplex) { + if (!(mii_info->duplex)) { + tempval = in_be32(&ug_regs->maccfg2); + tempval &= ~(MACCFG2_FDX); + out_be32(&ug_regs->maccfg2, tempval); + + ugeth_info("%s: Half Duplex", dev->name); + } else { + tempval = in_be32(&ug_regs->maccfg2); + tempval |= MACCFG2_FDX; + out_be32(&ug_regs->maccfg2, tempval); + + ugeth_info("%s: Full Duplex", dev->name); + } + + ugeth->oldduplex = mii_info->duplex; + } + + if (mii_info->speed != ugeth->oldspeed) { + switch (mii_info->speed) { + case 1000: +#ifdef CONFIG_MPC836x +/* FIXME: This code is for 100Mbs BUG fixing, +remove this when it is fixed!!! */ + if (ugeth->ug_info->enet_interface == + ENET_1000_GMII) + /* Run the commands which initialize the PHY */ + { + tempval = + (u32) mii_info->mdio_read(ugeth-> + dev, mii_info->mii_id, 0x1b); + tempval |= 0x000f; + mii_info->mdio_write(ugeth->dev, + mii_info->mii_id, 0x1b, + (u16) tempval); + tempval = + (u32) mii_info->mdio_read(ugeth-> + dev, mii_info->mii_id, + MII_BMCR); + mii_info->mdio_write(ugeth->dev, + mii_info->mii_id, MII_BMCR, + (u16) (tempval | BMCR_RESET)); + } else if (ugeth->ug_info->enet_interface == + ENET_1000_RGMII) + /* Run the commands which initialize the PHY */ + { + tempval = + (u32) mii_info->mdio_read(ugeth-> + dev, mii_info->mii_id, 0x1b); + tempval = (tempval & ~0x000f) | 0x000b; + mii_info->mdio_write(ugeth->dev, + mii_info->mii_id, 0x1b, + (u16) tempval); + tempval = + (u32) mii_info->mdio_read(ugeth-> + dev, mii_info->mii_id, + MII_BMCR); + mii_info->mdio_write(ugeth->dev, + mii_info->mii_id, MII_BMCR, + (u16) (tempval | BMCR_RESET)); + } + msleep(4000); +#endif /* CONFIG_MPC8360 */ + adjust_enet_interface(ugeth); + break; + case 100: + case 10: +#ifdef CONFIG_MPC836x +/* FIXME: This code is for 100Mbs BUG fixing, +remove this lines when it will be fixed!!! */ + ugeth->ug_info->enet_interface = ENET_100_RGMII; + tempval = + (u32) mii_info->mdio_read(ugeth->dev, + mii_info->mii_id, + 0x1b); + tempval = (tempval & ~0x000f) | 0x000b; + mii_info->mdio_write(ugeth->dev, + mii_info->mii_id, 0x1b, + (u16) tempval); + tempval = + (u32) mii_info->mdio_read(ugeth->dev, + mii_info->mii_id, + MII_BMCR); + mii_info->mdio_write(ugeth->dev, + mii_info->mii_id, MII_BMCR, + (u16) (tempval | + BMCR_RESET)); + msleep(4000); +#endif /* CONFIG_MPC8360 */ + adjust_enet_interface(ugeth); + break; + default: + ugeth_warn + ("%s: Ack! Speed (%d) is not 10/100/1000!", + dev->name, mii_info->speed); + break; + } + + ugeth_info("%s: Speed %dBT", dev->name, + mii_info->speed); + + ugeth->oldspeed = mii_info->speed; + } + + if (!ugeth->oldlink) { + ugeth_info("%s: Link is up", dev->name); + ugeth->oldlink = 1; + netif_carrier_on(dev); + netif_schedule(dev); + } + } else { + if (ugeth->oldlink) { + ugeth_info("%s: Link is down", dev->name); + ugeth->oldlink = 0; + ugeth->oldspeed = 0; + ugeth->oldduplex = -1; + netif_carrier_off(dev); + } + } +} + +/* Configure the PHY for dev. + * returns 0 if success. -1 if failure + */ +static int init_phy(struct net_device *dev) +{ + ucc_geth_private_t *ugeth = netdev_priv(dev); + struct phy_info *curphy; + ucc_mii_mng_t *mii_regs; + struct ugeth_mii_info *mii_info; + int err; + + mii_regs = &ugeth->ug_regs->miimng; + + ugeth->oldlink = 0; + ugeth->oldspeed = 0; + ugeth->oldduplex = -1; + + mii_info = kmalloc(sizeof(struct ugeth_mii_info), GFP_KERNEL); + + if (NULL == mii_info) { + ugeth_err("%s: Could not allocate mii_info", dev->name); + return -ENOMEM; + } + + mii_info->mii_regs = mii_regs; + mii_info->speed = SPEED_1000; + mii_info->duplex = DUPLEX_FULL; + mii_info->pause = 0; + mii_info->link = 0; + + mii_info->advertising = (ADVERTISED_10baseT_Half | + ADVERTISED_10baseT_Full | + ADVERTISED_100baseT_Half | + ADVERTISED_100baseT_Full | + ADVERTISED_1000baseT_Full); + mii_info->autoneg = 1; + + mii_info->mii_id = ugeth->ug_info->phy_address; + + mii_info->dev = dev; + + mii_info->mdio_read = &read_phy_reg; + mii_info->mdio_write = &write_phy_reg; + + ugeth->mii_info = mii_info; + + spin_lock_irq(&ugeth->lock); + + /* Set this UCC to be the master of the MII managment */ + ucc_set_qe_mux_mii_mng(ugeth->ug_info->uf_info.ucc_num); + + if (init_mii_management_configuration(1, + ugeth->ug_info-> + miiPreambleSupress, + &mii_regs->miimcfg, + &mii_regs->miimind)) { + ugeth_err("%s: The MII Bus is stuck!", dev->name); + err = -1; + goto bus_fail; + } + + spin_unlock_irq(&ugeth->lock); + + /* get info for this PHY */ + curphy = get_phy_info(ugeth->mii_info); + + if (curphy == NULL) { + ugeth_err("%s: No PHY found", dev->name); + err = -1; + goto no_phy; + } + + mii_info->phyinfo = curphy; + + /* Run the commands which initialize the PHY */ + if (curphy->init) { + err = curphy->init(ugeth->mii_info); + if (err) + goto phy_init_fail; + } + + return 0; + + phy_init_fail: + no_phy: + bus_fail: + kfree(mii_info); + + return err; +} + +#ifdef CONFIG_UGETH_TX_ON_DEMOND +static int ugeth_transmit_on_demand(ucc_geth_private_t *ugeth) +{ + ucc_fast_transmit_on_demand(ugeth->uccf); + + return 0; +} +#endif + +static int ugeth_graceful_stop_tx(ucc_geth_private_t *ugeth) +{ + ucc_fast_private_t *uccf; + u32 cecr_subblock; + u32 temp; + + uccf = ugeth->uccf; + + /* Mask GRACEFUL STOP TX interrupt bit and clear it */ + temp = in_be32(uccf->p_uccm); + temp &= ~UCCE_GRA; + out_be32(uccf->p_uccm, temp); + out_be32(uccf->p_ucce, UCCE_GRA); /* clear by writing 1 */ + + /* Issue host command */ + cecr_subblock = + ucc_fast_get_qe_cr_subblock(ugeth->ug_info->uf_info.ucc_num); + qe_issue_cmd(QE_GRACEFUL_STOP_TX, cecr_subblock, + (u8) QE_CR_PROTOCOL_ETHERNET, 0); + + /* Wait for command to complete */ + do { + temp = in_be32(uccf->p_ucce); + } while (!(temp & UCCE_GRA)); + + uccf->stopped_tx = 1; + + return 0; +} + +static int ugeth_graceful_stop_rx(ucc_geth_private_t * ugeth) +{ + ucc_fast_private_t *uccf; + u32 cecr_subblock; + u8 temp; + + uccf = ugeth->uccf; + + /* Clear acknowledge bit */ + temp = ugeth->p_rx_glbl_pram->rxgstpack; + temp &= ~GRACEFUL_STOP_ACKNOWLEDGE_RX; + ugeth->p_rx_glbl_pram->rxgstpack = temp; + + /* Keep issuing command and checking acknowledge bit until + it is asserted, according to spec */ + do { + /* Issue host command */ + cecr_subblock = + ucc_fast_get_qe_cr_subblock(ugeth->ug_info->uf_info. + ucc_num); + qe_issue_cmd(QE_GRACEFUL_STOP_RX, cecr_subblock, + (u8) QE_CR_PROTOCOL_ETHERNET, 0); + + temp = ugeth->p_rx_glbl_pram->rxgstpack; + } while (!(temp & GRACEFUL_STOP_ACKNOWLEDGE_RX)); + + uccf->stopped_rx = 1; + + return 0; +} + +static int ugeth_restart_tx(ucc_geth_private_t *ugeth) +{ + ucc_fast_private_t *uccf; + u32 cecr_subblock; + + uccf = ugeth->uccf; + + cecr_subblock = + ucc_fast_get_qe_cr_subblock(ugeth->ug_info->uf_info.ucc_num); + qe_issue_cmd(QE_RESTART_TX, cecr_subblock, (u8) QE_CR_PROTOCOL_ETHERNET, + 0); + uccf->stopped_tx = 0; + + return 0; +} + +static int ugeth_restart_rx(ucc_geth_private_t *ugeth) +{ + ucc_fast_private_t *uccf; + u32 cecr_subblock; + + uccf = ugeth->uccf; + + cecr_subblock = + ucc_fast_get_qe_cr_subblock(ugeth->ug_info->uf_info.ucc_num); + qe_issue_cmd(QE_RESTART_RX, cecr_subblock, (u8) QE_CR_PROTOCOL_ETHERNET, + 0); + uccf->stopped_rx = 0; + + return 0; +} + +static int ugeth_enable(ucc_geth_private_t *ugeth, comm_dir_e mode) +{ + ucc_fast_private_t *uccf; + int enabled_tx, enabled_rx; + + uccf = ugeth->uccf; + + /* check if the UCC number is in range. */ + if (ugeth->ug_info->uf_info.ucc_num >= UCC_MAX_NUM) { + ugeth_err("%s: ucc_num out of range.", __FUNCTION__); + return -EINVAL; + } + + enabled_tx = uccf->enabled_tx; + enabled_rx = uccf->enabled_rx; + + /* Get Tx and Rx going again, in case this channel was actively + disabled. */ + if ((mode & COMM_DIR_TX) && (!enabled_tx) && uccf->stopped_tx) + ugeth_restart_tx(ugeth); + if ((mode & COMM_DIR_RX) && (!enabled_rx) && uccf->stopped_rx) + ugeth_restart_rx(ugeth); + + ucc_fast_enable(uccf, mode); /* OK to do even if not disabled */ + + return 0; + +} + +static int ugeth_disable(ucc_geth_private_t * ugeth, comm_dir_e mode) +{ + ucc_fast_private_t *uccf; + + uccf = ugeth->uccf; + + /* check if the UCC number is in range. */ + if (ugeth->ug_info->uf_info.ucc_num >= UCC_MAX_NUM) { + ugeth_err("%s: ucc_num out of range.", __FUNCTION__); + return -EINVAL; + } + + /* Stop any transmissions */ + if ((mode & COMM_DIR_TX) && uccf->enabled_tx && !uccf->stopped_tx) + ugeth_graceful_stop_tx(ugeth); + + /* Stop any receptions */ + if ((mode & COMM_DIR_RX) && uccf->enabled_rx && !uccf->stopped_rx) + ugeth_graceful_stop_rx(ugeth); + + ucc_fast_disable(ugeth->uccf, mode); /* OK to do even if not enabled */ + + return 0; +} + +static void ugeth_dump_regs(ucc_geth_private_t *ugeth) +{ +#ifdef DEBUG + ucc_fast_dump_regs(ugeth->uccf); + dump_regs(ugeth); + dump_bds(ugeth); +#endif +} + +#ifdef CONFIG_UGETH_FILTERING +static int ugeth_ext_filtering_serialize_tad(ucc_geth_tad_params_t * + p_UccGethTadParams, + qe_fltr_tad_t *qe_fltr_tad) +{ + u16 temp; + + /* Zero serialized TAD */ + memset(qe_fltr_tad, 0, QE_FLTR_TAD_SIZE); + + qe_fltr_tad->serialized[0] |= UCC_GETH_TAD_V; /* Must have this */ + if (p_UccGethTadParams->rx_non_dynamic_extended_features_mode || + (p_UccGethTadParams->vtag_op != UCC_GETH_VLAN_OPERATION_TAGGED_NOP) + || (p_UccGethTadParams->vnontag_op != + UCC_GETH_VLAN_OPERATION_NON_TAGGED_NOP) + ) + qe_fltr_tad->serialized[0] |= UCC_GETH_TAD_EF; + if (p_UccGethTadParams->reject_frame) + qe_fltr_tad->serialized[0] |= UCC_GETH_TAD_REJ; + temp = + (u16) (((u16) p_UccGethTadParams-> + vtag_op) << UCC_GETH_TAD_VTAG_OP_SHIFT); + qe_fltr_tad->serialized[0] |= (u8) (temp >> 8); /* upper bits */ + + qe_fltr_tad->serialized[1] |= (u8) (temp & 0x00ff); /* lower bits */ + if (p_UccGethTadParams->vnontag_op == + UCC_GETH_VLAN_OPERATION_NON_TAGGED_Q_TAG_INSERT) + qe_fltr_tad->serialized[1] |= UCC_GETH_TAD_V_NON_VTAG_OP; + qe_fltr_tad->serialized[1] |= + p_UccGethTadParams->rqos << UCC_GETH_TAD_RQOS_SHIFT; + + qe_fltr_tad->serialized[2] |= + p_UccGethTadParams->vpri << UCC_GETH_TAD_V_PRIORITY_SHIFT; + /* upper bits */ + qe_fltr_tad->serialized[2] |= (u8) (p_UccGethTadParams->vid >> 8); + /* lower bits */ + qe_fltr_tad->serialized[3] |= (u8) (p_UccGethTadParams->vid & 0x00ff); + + return 0; +} + +static enet_addr_container_t + *ugeth_82xx_filtering_get_match_addr_in_hash(ucc_geth_private_t *ugeth, + enet_addr_t *p_enet_addr) +{ + enet_addr_container_t *enet_addr_cont; + struct list_head *p_lh; + u16 i, num; + int32_t j; + u8 *p_counter; + + if ((*p_enet_addr)[0] & ENET_GROUP_ADDR) { + p_lh = &ugeth->group_hash_q; + p_counter = &(ugeth->numGroupAddrInHash); + } else { + p_lh = &ugeth->ind_hash_q; + p_counter = &(ugeth->numIndAddrInHash); + } + + if (!p_lh) + return NULL; + + num = *p_counter; + + for (i = 0; i < num; i++) { + enet_addr_cont = + (enet_addr_container_t *) + ENET_ADDR_CONT_ENTRY(dequeue(p_lh)); + for (j = ENET_NUM_OCTETS_PER_ADDRESS - 1; j >= 0; j--) { + if ((*p_enet_addr)[j] != (enet_addr_cont->address)[j]) + break; + if (j == 0) + return enet_addr_cont; /* Found */ + } + enqueue(p_lh, &enet_addr_cont->node); /* Put it back */ + } + return NULL; +} + +static int ugeth_82xx_filtering_add_addr_in_hash(ucc_geth_private_t *ugeth, + enet_addr_t *p_enet_addr) +{ + ucc_geth_enet_address_recognition_location_e location; + enet_addr_container_t *enet_addr_cont; + struct list_head *p_lh; + u8 i; + u32 limit; + u8 *p_counter; + + if ((*p_enet_addr)[0] & ENET_GROUP_ADDR) { + p_lh = &ugeth->group_hash_q; + limit = ugeth->ug_info->maxGroupAddrInHash; + location = + UCC_GETH_ENET_ADDRESS_RECOGNITION_LOCATION_GROUP_HASH; + p_counter = &(ugeth->numGroupAddrInHash); + } else { + p_lh = &ugeth->ind_hash_q; + limit = ugeth->ug_info->maxIndAddrInHash; + location = + UCC_GETH_ENET_ADDRESS_RECOGNITION_LOCATION_INDIVIDUAL_HASH; + p_counter = &(ugeth->numIndAddrInHash); + } + + if ((enet_addr_cont = + ugeth_82xx_filtering_get_match_addr_in_hash(ugeth, p_enet_addr))) { + list_add(p_lh, &enet_addr_cont->node); /* Put it back */ + return 0; + } + if ((!p_lh) || (!(*p_counter < limit))) + return -EBUSY; + if (!(enet_addr_cont = get_enet_addr_container())) + return -ENOMEM; + for (i = 0; i < ENET_NUM_OCTETS_PER_ADDRESS; i++) + (enet_addr_cont->address)[i] = (*p_enet_addr)[i]; + enet_addr_cont->location = location; + enqueue(p_lh, &enet_addr_cont->node); /* Put it back */ + ++(*p_counter); + + hw_add_addr_in_hash(ugeth, &(enet_addr_cont->address)); + + return 0; +} + +static int ugeth_82xx_filtering_clear_addr_in_hash(ucc_geth_private_t *ugeth, + enet_addr_t *p_enet_addr) +{ + ucc_geth_82xx_address_filtering_pram_t *p_82xx_addr_filt; + enet_addr_container_t *enet_addr_cont; + ucc_fast_private_t *uccf; + comm_dir_e comm_dir; + u16 i, num; + struct list_head *p_lh; + u32 *addr_h, *addr_l; + u8 *p_counter; + + uccf = ugeth->uccf; + + p_82xx_addr_filt = + (ucc_geth_82xx_address_filtering_pram_t *) ugeth->p_rx_glbl_pram-> + addressfiltering; + + if (! + (enet_addr_cont = + ugeth_82xx_filtering_get_match_addr_in_hash(ugeth, p_enet_addr))) + return -ENOENT; + + /* It's been found and removed from the CQ. */ + /* Now destroy its container */ + put_enet_addr_container(enet_addr_cont); + + if ((*p_enet_addr)[0] & ENET_GROUP_ADDR) { + addr_h = &(p_82xx_addr_filt->gaddr_h); + addr_l = &(p_82xx_addr_filt->gaddr_l); + p_lh = &ugeth->group_hash_q; + p_counter = &(ugeth->numGroupAddrInHash); + } else { + addr_h = &(p_82xx_addr_filt->iaddr_h); + addr_l = &(p_82xx_addr_filt->iaddr_l); + p_lh = &ugeth->ind_hash_q; + p_counter = &(ugeth->numIndAddrInHash); + } + + comm_dir = 0; + if (uccf->enabled_tx) + comm_dir |= COMM_DIR_TX; + if (uccf->enabled_rx) + comm_dir |= COMM_DIR_RX; + if (comm_dir) + ugeth_disable(ugeth, comm_dir); + + /* Clear the hash table. */ + out_be32(addr_h, 0x00000000); + out_be32(addr_l, 0x00000000); + + /* Add all remaining CQ elements back into hash */ + num = --(*p_counter); + for (i = 0; i < num; i++) { + enet_addr_cont = + (enet_addr_container_t *) + ENET_ADDR_CONT_ENTRY(dequeue(p_lh)); + hw_add_addr_in_hash(ugeth, &(enet_addr_cont->address)); + enqueue(p_lh, &enet_addr_cont->node); /* Put it back */ + } + + if (comm_dir) + ugeth_enable(ugeth, comm_dir); + + return 0; +} +#endif /* CONFIG_UGETH_FILTERING */ + +static int ugeth_82xx_filtering_clear_all_addr_in_hash(ucc_geth_private_t * + ugeth, + enet_addr_type_e + enet_addr_type) +{ + ucc_geth_82xx_address_filtering_pram_t *p_82xx_addr_filt; + ucc_fast_private_t *uccf; + comm_dir_e comm_dir; + struct list_head *p_lh; + u16 i, num; + u32 *addr_h, *addr_l; + u8 *p_counter; + + uccf = ugeth->uccf; + + p_82xx_addr_filt = + (ucc_geth_82xx_address_filtering_pram_t *) ugeth->p_rx_glbl_pram-> + addressfiltering; + + if (enet_addr_type == ENET_ADDR_TYPE_GROUP) { + addr_h = &(p_82xx_addr_filt->gaddr_h); + addr_l = &(p_82xx_addr_filt->gaddr_l); + p_lh = &ugeth->group_hash_q; + p_counter = &(ugeth->numGroupAddrInHash); + } else if (enet_addr_type == ENET_ADDR_TYPE_INDIVIDUAL) { + addr_h = &(p_82xx_addr_filt->iaddr_h); + addr_l = &(p_82xx_addr_filt->iaddr_l); + p_lh = &ugeth->ind_hash_q; + p_counter = &(ugeth->numIndAddrInHash); + } else + return -EINVAL; + + comm_dir = 0; + if (uccf->enabled_tx) + comm_dir |= COMM_DIR_TX; + if (uccf->enabled_rx) + comm_dir |= COMM_DIR_RX; + if (comm_dir) + ugeth_disable(ugeth, comm_dir); + + /* Clear the hash table. */ + out_be32(addr_h, 0x00000000); + out_be32(addr_l, 0x00000000); + + if (!p_lh) + return 0; + + num = *p_counter; + + /* Delete all remaining CQ elements */ + for (i = 0; i < num; i++) + put_enet_addr_container(ENET_ADDR_CONT_ENTRY(dequeue(p_lh))); + + *p_counter = 0; + + if (comm_dir) + ugeth_enable(ugeth, comm_dir); + + return 0; +} + +#ifdef CONFIG_UGETH_FILTERING +static int ugeth_82xx_filtering_add_addr_in_paddr(ucc_geth_private_t *ugeth, + enet_addr_t *p_enet_addr, + u8 paddr_num) +{ + int i; + + if ((*p_enet_addr)[0] & ENET_GROUP_ADDR) + ugeth_warn + ("%s: multicast address added to paddr will have no " + "effect - is this what you wanted?", + __FUNCTION__); + + ugeth->indAddrRegUsed[paddr_num] = 1; /* mark this paddr as used */ + /* store address in our database */ + for (i = 0; i < ENET_NUM_OCTETS_PER_ADDRESS; i++) + ugeth->paddr[paddr_num][i] = (*p_enet_addr)[i]; + /* put in hardware */ + return hw_add_addr_in_paddr(ugeth, p_enet_addr, paddr_num); +} +#endif /* CONFIG_UGETH_FILTERING */ + +static int ugeth_82xx_filtering_clear_addr_in_paddr(ucc_geth_private_t *ugeth, + u8 paddr_num) +{ + ugeth->indAddrRegUsed[paddr_num] = 0; /* mark this paddr as not used */ + return hw_clear_addr_in_paddr(ugeth, paddr_num);/* clear in hardware */ +} + +static void ucc_geth_memclean(ucc_geth_private_t *ugeth) +{ + u16 i, j; + u8 *bd; + + if (!ugeth) + return; + + if (ugeth->uccf) + ucc_fast_free(ugeth->uccf); + + if (ugeth->p_thread_data_tx) { + qe_muram_free(ugeth->thread_dat_tx_offset); + ugeth->p_thread_data_tx = NULL; + } + if (ugeth->p_thread_data_rx) { + qe_muram_free(ugeth->thread_dat_rx_offset); + ugeth->p_thread_data_rx = NULL; + } + if (ugeth->p_exf_glbl_param) { + qe_muram_free(ugeth->exf_glbl_param_offset); + ugeth->p_exf_glbl_param = NULL; + } + if (ugeth->p_rx_glbl_pram) { + qe_muram_free(ugeth->rx_glbl_pram_offset); + ugeth->p_rx_glbl_pram = NULL; + } + if (ugeth->p_tx_glbl_pram) { + qe_muram_free(ugeth->tx_glbl_pram_offset); + ugeth->p_tx_glbl_pram = NULL; + } + if (ugeth->p_send_q_mem_reg) { + qe_muram_free(ugeth->send_q_mem_reg_offset); + ugeth->p_send_q_mem_reg = NULL; + } + if (ugeth->p_scheduler) { + qe_muram_free(ugeth->scheduler_offset); + ugeth->p_scheduler = NULL; + } + if (ugeth->p_tx_fw_statistics_pram) { + qe_muram_free(ugeth->tx_fw_statistics_pram_offset); + ugeth->p_tx_fw_statistics_pram = NULL; + } + if (ugeth->p_rx_fw_statistics_pram) { + qe_muram_free(ugeth->rx_fw_statistics_pram_offset); + ugeth->p_rx_fw_statistics_pram = NULL; + } + if (ugeth->p_rx_irq_coalescing_tbl) { + qe_muram_free(ugeth->rx_irq_coalescing_tbl_offset); + ugeth->p_rx_irq_coalescing_tbl = NULL; + } + if (ugeth->p_rx_bd_qs_tbl) { + qe_muram_free(ugeth->rx_bd_qs_tbl_offset); + ugeth->p_rx_bd_qs_tbl = NULL; + } + if (ugeth->p_init_enet_param_shadow) { + return_init_enet_entries(ugeth, + &(ugeth->p_init_enet_param_shadow-> + rxthread[0]), + ENET_INIT_PARAM_MAX_ENTRIES_RX, + ugeth->ug_info->riscRx, 1); + return_init_enet_entries(ugeth, + &(ugeth->p_init_enet_param_shadow-> + txthread[0]), + ENET_INIT_PARAM_MAX_ENTRIES_TX, + ugeth->ug_info->riscTx, 0); + kfree(ugeth->p_init_enet_param_shadow); + ugeth->p_init_enet_param_shadow = NULL; + } + for (i = 0; i < ugeth->ug_info->numQueuesTx; i++) { + bd = ugeth->p_tx_bd_ring[i]; + for (j = 0; j < ugeth->ug_info->bdRingLenTx[i]; j++) { + if (ugeth->tx_skbuff[i][j]) { + dma_unmap_single(NULL, + BD_BUFFER_ARG(bd), + (BD_STATUS_AND_LENGTH(bd) & + BD_LENGTH_MASK), + DMA_TO_DEVICE); + dev_kfree_skb_any(ugeth->tx_skbuff[i][j]); + ugeth->tx_skbuff[i][j] = NULL; + } + } + + kfree(ugeth->tx_skbuff[i]); + + if (ugeth->p_tx_bd_ring[i]) { + if (ugeth->ug_info->uf_info.bd_mem_part == + MEM_PART_SYSTEM) + kfree((void *)ugeth->tx_bd_ring_offset[i]); + else if (ugeth->ug_info->uf_info.bd_mem_part == + MEM_PART_MURAM) + qe_muram_free(ugeth->tx_bd_ring_offset[i]); + ugeth->p_tx_bd_ring[i] = NULL; + } + } + for (i = 0; i < ugeth->ug_info->numQueuesRx; i++) { + if (ugeth->p_rx_bd_ring[i]) { + /* Return existing data buffers in ring */ + bd = ugeth->p_rx_bd_ring[i]; + for (j = 0; j < ugeth->ug_info->bdRingLenRx[i]; j++) { + if (ugeth->rx_skbuff[i][j]) { + dma_unmap_single(NULL, BD_BUFFER(bd), + ugeth->ug_info-> + uf_info. + max_rx_buf_length + + UCC_GETH_RX_DATA_BUF_ALIGNMENT, + DMA_FROM_DEVICE); + + dev_kfree_skb_any(ugeth-> + rx_skbuff[i][j]); + ugeth->rx_skbuff[i][j] = NULL; + } + bd += UCC_GETH_SIZE_OF_BD; + } + + kfree(ugeth->rx_skbuff[i]); + + if (ugeth->ug_info->uf_info.bd_mem_part == + MEM_PART_SYSTEM) + kfree((void *)ugeth->rx_bd_ring_offset[i]); + else if (ugeth->ug_info->uf_info.bd_mem_part == + MEM_PART_MURAM) + qe_muram_free(ugeth->rx_bd_ring_offset[i]); + ugeth->p_rx_bd_ring[i] = NULL; + } + } + while (!list_empty(&ugeth->group_hash_q)) + put_enet_addr_container(ENET_ADDR_CONT_ENTRY + (dequeue(&ugeth->group_hash_q))); + while (!list_empty(&ugeth->ind_hash_q)) + put_enet_addr_container(ENET_ADDR_CONT_ENTRY + (dequeue(&ugeth->ind_hash_q))); + +} + +static void ucc_geth_set_multi(struct net_device *dev) +{ + ucc_geth_private_t *ugeth; + struct dev_mc_list *dmi; + ucc_fast_t *uf_regs; + ucc_geth_82xx_address_filtering_pram_t *p_82xx_addr_filt; + enet_addr_t tempaddr; + u8 *mcptr, *tdptr; + int i, j; + + ugeth = netdev_priv(dev); + + uf_regs = ugeth->uccf->uf_regs; + + if (dev->flags & IFF_PROMISC) { + + /* Log any net taps. */ + printk("%s: Promiscuous mode enabled.\n", dev->name); + uf_regs->upsmr |= UPSMR_PRO; + + } else { + + uf_regs->upsmr &= ~UPSMR_PRO; + + p_82xx_addr_filt = + (ucc_geth_82xx_address_filtering_pram_t *) ugeth-> + p_rx_glbl_pram->addressfiltering; + + if (dev->flags & IFF_ALLMULTI) { + /* Catch all multicast addresses, so set the + * filter to all 1's. + */ + out_be32(&p_82xx_addr_filt->gaddr_h, 0xffffffff); + out_be32(&p_82xx_addr_filt->gaddr_l, 0xffffffff); + } else { + /* Clear filter and add the addresses in the list. + */ + out_be32(&p_82xx_addr_filt->gaddr_h, 0x0); + out_be32(&p_82xx_addr_filt->gaddr_l, 0x0); + + dmi = dev->mc_list; + + for (i = 0; i < dev->mc_count; i++, dmi = dmi->next) { + + /* Only support group multicast for now. + */ + if (!(dmi->dmi_addr[0] & 1)) + continue; + + /* The address in dmi_addr is LSB first, + * and taddr is MSB first. We have to + * copy bytes MSB first from dmi_addr. + */ + mcptr = (u8 *) dmi->dmi_addr + 5; + tdptr = (u8 *) & tempaddr; + for (j = 0; j < 6; j++) + *tdptr++ = *mcptr--; + + /* Ask CPM to run CRC and set bit in + * filter mask. + */ + hw_add_addr_in_hash(ugeth, &tempaddr); + + } + } + } +} + +static void ucc_geth_stop(ucc_geth_private_t *ugeth) +{ + ucc_geth_t *ug_regs = ugeth->ug_regs; + u32 tempval; + + ugeth_vdbg("%s: IN", __FUNCTION__); + + /* Disable the controller */ + ugeth_disable(ugeth, COMM_DIR_RX_AND_TX); + + /* Tell the kernel the link is down */ + ugeth->mii_info->link = 0; + adjust_link(ugeth->dev); + + /* Mask all interrupts */ + out_be32(ugeth->uccf->p_ucce, 0x00000000); + + /* Clear all interrupts */ + out_be32(ugeth->uccf->p_ucce, 0xffffffff); + + /* Disable Rx and Tx */ + tempval = in_be32(&ug_regs->maccfg1); + tempval &= ~(MACCFG1_ENABLE_RX | MACCFG1_ENABLE_TX); + out_be32(&ug_regs->maccfg1, tempval); + + if (ugeth->ug_info->board_flags & FSL_UGETH_BRD_HAS_PHY_INTR) { + /* Clear any pending interrupts */ + mii_clear_phy_interrupt(ugeth->mii_info); + + /* Disable PHY Interrupts */ + mii_configure_phy_interrupt(ugeth->mii_info, + MII_INTERRUPT_DISABLED); + } + + free_irq(ugeth->ug_info->uf_info.irq, ugeth->dev); + + if (ugeth->ug_info->board_flags & FSL_UGETH_BRD_HAS_PHY_INTR) { + free_irq(ugeth->ug_info->phy_interrupt, ugeth->dev); + } else { + del_timer_sync(&ugeth->phy_info_timer); + } + + ucc_geth_memclean(ugeth); +} + +static int ucc_geth_startup(ucc_geth_private_t *ugeth) +{ + ucc_geth_82xx_address_filtering_pram_t *p_82xx_addr_filt; + ucc_geth_init_pram_t *p_init_enet_pram; + ucc_fast_private_t *uccf; + ucc_geth_info_t *ug_info; + ucc_fast_info_t *uf_info; + ucc_fast_t *uf_regs; + ucc_geth_t *ug_regs; + int ret_val = -EINVAL; + u32 remoder = UCC_GETH_REMODER_INIT; + u32 init_enet_pram_offset, cecr_subblock, command, maccfg1; + u32 ifstat, i, j, size, l2qt, l3qt, length; + u16 temoder = UCC_GETH_TEMODER_INIT; + u16 test; + u8 function_code = 0; + u8 *bd, *endOfRing; + u8 numThreadsRxNumerical, numThreadsTxNumerical; + + ugeth_vdbg("%s: IN", __FUNCTION__); + + ug_info = ugeth->ug_info; + uf_info = &ug_info->uf_info; + + if (!((uf_info->bd_mem_part == MEM_PART_SYSTEM) || + (uf_info->bd_mem_part == MEM_PART_MURAM))) { + ugeth_err("%s: Bad memory partition value.", __FUNCTION__); + return -EINVAL; + } + + /* Rx BD lengths */ + for (i = 0; i < ug_info->numQueuesRx; i++) { + if ((ug_info->bdRingLenRx[i] < UCC_GETH_RX_BD_RING_SIZE_MIN) || + (ug_info->bdRingLenRx[i] % + UCC_GETH_RX_BD_RING_SIZE_ALIGNMENT)) { + ugeth_err + ("%s: Rx BD ring length must be multiple of 4," + " no smaller than 8.", __FUNCTION__); + return -EINVAL; + } + } + + /* Tx BD lengths */ + for (i = 0; i < ug_info->numQueuesTx; i++) { + if (ug_info->bdRingLenTx[i] < UCC_GETH_TX_BD_RING_SIZE_MIN) { + ugeth_err + ("%s: Tx BD ring length must be no smaller than 2.", + __FUNCTION__); + return -EINVAL; + } + } + + /* mrblr */ + if ((uf_info->max_rx_buf_length == 0) || + (uf_info->max_rx_buf_length % UCC_GETH_MRBLR_ALIGNMENT)) { + ugeth_err + ("%s: max_rx_buf_length must be non-zero multiple of 128.", + __FUNCTION__); + return -EINVAL; + } + + /* num Tx queues */ + if (ug_info->numQueuesTx > NUM_TX_QUEUES) { + ugeth_err("%s: number of tx queues too large.", __FUNCTION__); + return -EINVAL; + } + + /* num Rx queues */ + if (ug_info->numQueuesRx > NUM_RX_QUEUES) { + ugeth_err("%s: number of rx queues too large.", __FUNCTION__); + return -EINVAL; + } + + /* l2qt */ + for (i = 0; i < UCC_GETH_VLAN_PRIORITY_MAX; i++) { + if (ug_info->l2qt[i] >= ug_info->numQueuesRx) { + ugeth_err + ("%s: VLAN priority table entry must not be" + " larger than number of Rx queues.", + __FUNCTION__); + return -EINVAL; + } + } + + /* l3qt */ + for (i = 0; i < UCC_GETH_IP_PRIORITY_MAX; i++) { + if (ug_info->l3qt[i] >= ug_info->numQueuesRx) { + ugeth_err + ("%s: IP priority table entry must not be" + " larger than number of Rx queues.", + __FUNCTION__); + return -EINVAL; + } + } + + if (ug_info->cam && !ug_info->ecamptr) { + ugeth_err("%s: If cam mode is chosen, must supply cam ptr.", + __FUNCTION__); + return -EINVAL; + } + + if ((ug_info->numStationAddresses != + UCC_GETH_NUM_OF_STATION_ADDRESSES_1) + && ug_info->rxExtendedFiltering) { + ugeth_err("%s: Number of station addresses greater than 1 " + "not allowed in extended parsing mode.", + __FUNCTION__); + return -EINVAL; + } + + /* Generate uccm_mask for receive */ + uf_info->uccm_mask = ug_info->eventRegMask & UCCE_OTHER;/* Errors */ + for (i = 0; i < ug_info->numQueuesRx; i++) + uf_info->uccm_mask |= (UCCE_RXBF_SINGLE_MASK << i); + + for (i = 0; i < ug_info->numQueuesTx; i++) + uf_info->uccm_mask |= (UCCE_TXBF_SINGLE_MASK << i); + /* Initialize the general fast UCC block. */ + if (ucc_fast_init(uf_info, &uccf)) { + ugeth_err("%s: Failed to init uccf.", __FUNCTION__); + ucc_geth_memclean(ugeth); + return -ENOMEM; + } + ugeth->uccf = uccf; + + switch (ug_info->numThreadsRx) { + case UCC_GETH_NUM_OF_THREADS_1: + numThreadsRxNumerical = 1; + break; + case UCC_GETH_NUM_OF_THREADS_2: + numThreadsRxNumerical = 2; + break; + case UCC_GETH_NUM_OF_THREADS_4: + numThreadsRxNumerical = 4; + break; + case UCC_GETH_NUM_OF_THREADS_6: + numThreadsRxNumerical = 6; + break; + case UCC_GETH_NUM_OF_THREADS_8: + numThreadsRxNumerical = 8; + break; + default: + ugeth_err("%s: Bad number of Rx threads value.", __FUNCTION__); + ucc_geth_memclean(ugeth); + return -EINVAL; + break; + } + + switch (ug_info->numThreadsTx) { + case UCC_GETH_NUM_OF_THREADS_1: + numThreadsTxNumerical = 1; + break; + case UCC_GETH_NUM_OF_THREADS_2: + numThreadsTxNumerical = 2; + break; + case UCC_GETH_NUM_OF_THREADS_4: + numThreadsTxNumerical = 4; + break; + case UCC_GETH_NUM_OF_THREADS_6: + numThreadsTxNumerical = 6; + break; + case UCC_GETH_NUM_OF_THREADS_8: + numThreadsTxNumerical = 8; + break; + default: + ugeth_err("%s: Bad number of Tx threads value.", __FUNCTION__); + ucc_geth_memclean(ugeth); + return -EINVAL; + break; + } + + /* Calculate rx_extended_features */ + ugeth->rx_non_dynamic_extended_features = ug_info->ipCheckSumCheck || + ug_info->ipAddressAlignment || + (ug_info->numStationAddresses != + UCC_GETH_NUM_OF_STATION_ADDRESSES_1); + + ugeth->rx_extended_features = ugeth->rx_non_dynamic_extended_features || + (ug_info->vlanOperationTagged != UCC_GETH_VLAN_OPERATION_TAGGED_NOP) + || (ug_info->vlanOperationNonTagged != + UCC_GETH_VLAN_OPERATION_NON_TAGGED_NOP); + + uf_regs = uccf->uf_regs; + ug_regs = (ucc_geth_t *) (uccf->uf_regs); + ugeth->ug_regs = ug_regs; + + init_default_reg_vals(&uf_regs->upsmr, + &ug_regs->maccfg1, &ug_regs->maccfg2); + + /* Set UPSMR */ + /* For more details see the hardware spec. */ + init_rx_parameters(ug_info->bro, + ug_info->rsh, ug_info->pro, &uf_regs->upsmr); + + /* We're going to ignore other registers for now, */ + /* except as needed to get up and running */ + + /* Set MACCFG1 */ + /* For more details see the hardware spec. */ + init_flow_control_params(ug_info->aufc, + ug_info->receiveFlowControl, + 1, + ug_info->pausePeriod, + ug_info->extensionField, + &uf_regs->upsmr, + &ug_regs->uempr, &ug_regs->maccfg1); + + maccfg1 = in_be32(&ug_regs->maccfg1); + maccfg1 |= MACCFG1_ENABLE_RX; + maccfg1 |= MACCFG1_ENABLE_TX; + out_be32(&ug_regs->maccfg1, maccfg1); + + /* Set IPGIFG */ + /* For more details see the hardware spec. */ + ret_val = init_inter_frame_gap_params(ug_info->nonBackToBackIfgPart1, + ug_info->nonBackToBackIfgPart2, + ug_info-> + miminumInterFrameGapEnforcement, + ug_info->backToBackInterFrameGap, + &ug_regs->ipgifg); + if (ret_val != 0) { + ugeth_err("%s: IPGIFG initialization parameter too large.", + __FUNCTION__); + ucc_geth_memclean(ugeth); + return ret_val; + } + + /* Set HAFDUP */ + /* For more details see the hardware spec. */ + ret_val = init_half_duplex_params(ug_info->altBeb, + ug_info->backPressureNoBackoff, + ug_info->noBackoff, + ug_info->excessDefer, + ug_info->altBebTruncation, + ug_info->maxRetransmission, + ug_info->collisionWindow, + &ug_regs->hafdup); + if (ret_val != 0) { + ugeth_err("%s: Half Duplex initialization parameter too large.", + __FUNCTION__); + ucc_geth_memclean(ugeth); + return ret_val; + } + + /* Set IFSTAT */ + /* For more details see the hardware spec. */ + /* Read only - resets upon read */ + ifstat = in_be32(&ug_regs->ifstat); + + /* Clear UEMPR */ + /* For more details see the hardware spec. */ + out_be32(&ug_regs->uempr, 0); + + /* Set UESCR */ + /* For more details see the hardware spec. */ + init_hw_statistics_gathering_mode((ug_info->statisticsMode & + UCC_GETH_STATISTICS_GATHERING_MODE_HARDWARE), + 0, &uf_regs->upsmr, &ug_regs->uescr); + + /* Allocate Tx bds */ + for (j = 0; j < ug_info->numQueuesTx; j++) { + /* Allocate in multiple of + UCC_GETH_TX_BD_RING_SIZE_MEMORY_ALIGNMENT, + according to spec */ + length = ((ug_info->bdRingLenTx[j] * UCC_GETH_SIZE_OF_BD) + / UCC_GETH_TX_BD_RING_SIZE_MEMORY_ALIGNMENT) + * UCC_GETH_TX_BD_RING_SIZE_MEMORY_ALIGNMENT; + if ((ug_info->bdRingLenTx[j] * UCC_GETH_SIZE_OF_BD) % + UCC_GETH_TX_BD_RING_SIZE_MEMORY_ALIGNMENT) + length += UCC_GETH_TX_BD_RING_SIZE_MEMORY_ALIGNMENT; + if (uf_info->bd_mem_part == MEM_PART_SYSTEM) { + u32 align = 4; + if (UCC_GETH_TX_BD_RING_ALIGNMENT > 4) + align = UCC_GETH_TX_BD_RING_ALIGNMENT; + ugeth->tx_bd_ring_offset[j] = + (u32) (kmalloc((u32) (length + align), + GFP_KERNEL)); + if (ugeth->tx_bd_ring_offset[j] != 0) + ugeth->p_tx_bd_ring[j] = + (void*)((ugeth->tx_bd_ring_offset[j] + + align) & ~(align - 1)); + } else if (uf_info->bd_mem_part == MEM_PART_MURAM) { + ugeth->tx_bd_ring_offset[j] = + qe_muram_alloc(length, + UCC_GETH_TX_BD_RING_ALIGNMENT); + if (!IS_MURAM_ERR(ugeth->tx_bd_ring_offset[j])) + ugeth->p_tx_bd_ring[j] = + (u8 *) qe_muram_addr(ugeth-> + tx_bd_ring_offset[j]); + } + if (!ugeth->p_tx_bd_ring[j]) { + ugeth_err + ("%s: Can not allocate memory for Tx bd rings.", + __FUNCTION__); + ucc_geth_memclean(ugeth); + return -ENOMEM; + } + /* Zero unused end of bd ring, according to spec */ + memset(ugeth->p_tx_bd_ring[j] + + ug_info->bdRingLenTx[j] * UCC_GETH_SIZE_OF_BD, 0, + length - ug_info->bdRingLenTx[j] * UCC_GETH_SIZE_OF_BD); + } + + /* Allocate Rx bds */ + for (j = 0; j < ug_info->numQueuesRx; j++) { + length = ug_info->bdRingLenRx[j] * UCC_GETH_SIZE_OF_BD; + if (uf_info->bd_mem_part == MEM_PART_SYSTEM) { + u32 align = 4; + if (UCC_GETH_RX_BD_RING_ALIGNMENT > 4) + align = UCC_GETH_RX_BD_RING_ALIGNMENT; + ugeth->rx_bd_ring_offset[j] = + (u32) (kmalloc((u32) (length + align), GFP_KERNEL)); + if (ugeth->rx_bd_ring_offset[j] != 0) + ugeth->p_rx_bd_ring[j] = + (void*)((ugeth->rx_bd_ring_offset[j] + + align) & ~(align - 1)); + } else if (uf_info->bd_mem_part == MEM_PART_MURAM) { + ugeth->rx_bd_ring_offset[j] = + qe_muram_alloc(length, + UCC_GETH_RX_BD_RING_ALIGNMENT); + if (!IS_MURAM_ERR(ugeth->rx_bd_ring_offset[j])) + ugeth->p_rx_bd_ring[j] = + (u8 *) qe_muram_addr(ugeth-> + rx_bd_ring_offset[j]); + } + if (!ugeth->p_rx_bd_ring[j]) { + ugeth_err + ("%s: Can not allocate memory for Rx bd rings.", + __FUNCTION__); + ucc_geth_memclean(ugeth); + return -ENOMEM; + } + } + + /* Init Tx bds */ + for (j = 0; j < ug_info->numQueuesTx; j++) { + /* Setup the skbuff rings */ + ugeth->tx_skbuff[j] = + (struct sk_buff **)kmalloc(sizeof(struct sk_buff *) * + ugeth->ug_info->bdRingLenTx[j], + GFP_KERNEL); + + if (ugeth->tx_skbuff[j] == NULL) { + ugeth_err("%s: Could not allocate tx_skbuff", + __FUNCTION__); + ucc_geth_memclean(ugeth); + return -ENOMEM; + } + + for (i = 0; i < ugeth->ug_info->bdRingLenTx[j]; i++) + ugeth->tx_skbuff[j][i] = NULL; + + ugeth->skb_curtx[j] = ugeth->skb_dirtytx[j] = 0; + bd = ugeth->confBd[j] = ugeth->txBd[j] = ugeth->p_tx_bd_ring[j]; + for (i = 0; i < ug_info->bdRingLenTx[j]; i++) { + BD_BUFFER_CLEAR(bd); + BD_STATUS_AND_LENGTH_SET(bd, 0); + bd += UCC_GETH_SIZE_OF_BD; + } + bd -= UCC_GETH_SIZE_OF_BD; + BD_STATUS_AND_LENGTH_SET(bd, T_W);/* for last BD set Wrap bit */ + } + + /* Init Rx bds */ + for (j = 0; j < ug_info->numQueuesRx; j++) { + /* Setup the skbuff rings */ + ugeth->rx_skbuff[j] = + (struct sk_buff **)kmalloc(sizeof(struct sk_buff *) * + ugeth->ug_info->bdRingLenRx[j], + GFP_KERNEL); + + if (ugeth->rx_skbuff[j] == NULL) { + ugeth_err("%s: Could not allocate rx_skbuff", + __FUNCTION__); + ucc_geth_memclean(ugeth); + return -ENOMEM; + } + + for (i = 0; i < ugeth->ug_info->bdRingLenRx[j]; i++) + ugeth->rx_skbuff[j][i] = NULL; + + ugeth->skb_currx[j] = 0; + bd = ugeth->rxBd[j] = ugeth->p_rx_bd_ring[j]; + for (i = 0; i < ug_info->bdRingLenRx[j]; i++) { + BD_STATUS_AND_LENGTH_SET(bd, R_I); + BD_BUFFER_CLEAR(bd); + bd += UCC_GETH_SIZE_OF_BD; + } + bd -= UCC_GETH_SIZE_OF_BD; + BD_STATUS_AND_LENGTH_SET(bd, R_W);/* for last BD set Wrap bit */ + } + + /* + * Global PRAM + */ + /* Tx global PRAM */ + /* Allocate global tx parameter RAM page */ + ugeth->tx_glbl_pram_offset = + qe_muram_alloc(sizeof(ucc_geth_tx_global_pram_t), + UCC_GETH_TX_GLOBAL_PRAM_ALIGNMENT); + if (IS_MURAM_ERR(ugeth->tx_glbl_pram_offset)) { + ugeth_err + ("%s: Can not allocate DPRAM memory for p_tx_glbl_pram.", + __FUNCTION__); + ucc_geth_memclean(ugeth); + return -ENOMEM; + } + ugeth->p_tx_glbl_pram = + (ucc_geth_tx_global_pram_t *) qe_muram_addr(ugeth-> + tx_glbl_pram_offset); + /* Zero out p_tx_glbl_pram */ + memset(ugeth->p_tx_glbl_pram, 0, sizeof(ucc_geth_tx_global_pram_t)); + + /* Fill global PRAM */ + + /* TQPTR */ + /* Size varies with number of Tx threads */ + ugeth->thread_dat_tx_offset = + qe_muram_alloc(numThreadsTxNumerical * + sizeof(ucc_geth_thread_data_tx_t) + + 32 * (numThreadsTxNumerical == 1), + UCC_GETH_THREAD_DATA_ALIGNMENT); + if (IS_MURAM_ERR(ugeth->thread_dat_tx_offset)) { + ugeth_err + ("%s: Can not allocate DPRAM memory for p_thread_data_tx.", + __FUNCTION__); + ucc_geth_memclean(ugeth); + return -ENOMEM; + } + + ugeth->p_thread_data_tx = + (ucc_geth_thread_data_tx_t *) qe_muram_addr(ugeth-> + thread_dat_tx_offset); + out_be32(&ugeth->p_tx_glbl_pram->tqptr, ugeth->thread_dat_tx_offset); + + /* vtagtable */ + for (i = 0; i < UCC_GETH_TX_VTAG_TABLE_ENTRY_MAX; i++) + out_be32(&ugeth->p_tx_glbl_pram->vtagtable[i], + ug_info->vtagtable[i]); + + /* iphoffset */ + for (i = 0; i < TX_IP_OFFSET_ENTRY_MAX; i++) + ugeth->p_tx_glbl_pram->iphoffset[i] = ug_info->iphoffset[i]; + + /* SQPTR */ + /* Size varies with number of Tx queues */ + ugeth->send_q_mem_reg_offset = + qe_muram_alloc(ug_info->numQueuesTx * + sizeof(ucc_geth_send_queue_qd_t), + UCC_GETH_SEND_QUEUE_QUEUE_DESCRIPTOR_ALIGNMENT); + if (IS_MURAM_ERR(ugeth->send_q_mem_reg_offset)) { + ugeth_err + ("%s: Can not allocate DPRAM memory for p_send_q_mem_reg.", + __FUNCTION__); + ucc_geth_memclean(ugeth); + return -ENOMEM; + } + + ugeth->p_send_q_mem_reg = + (ucc_geth_send_queue_mem_region_t *) qe_muram_addr(ugeth-> + send_q_mem_reg_offset); + out_be32(&ugeth->p_tx_glbl_pram->sqptr, ugeth->send_q_mem_reg_offset); + + /* Setup the table */ + /* Assume BD rings are already established */ + for (i = 0; i < ug_info->numQueuesTx; i++) { + endOfRing = + ugeth->p_tx_bd_ring[i] + (ug_info->bdRingLenTx[i] - + 1) * UCC_GETH_SIZE_OF_BD; + if (ugeth->ug_info->uf_info.bd_mem_part == MEM_PART_SYSTEM) { + out_be32(&ugeth->p_send_q_mem_reg->sqqd[i].bd_ring_base, + (u32) virt_to_phys(ugeth->p_tx_bd_ring[i])); + out_be32(&ugeth->p_send_q_mem_reg->sqqd[i]. + last_bd_completed_address, + (u32) virt_to_phys(endOfRing)); + } else if (ugeth->ug_info->uf_info.bd_mem_part == + MEM_PART_MURAM) { + out_be32(&ugeth->p_send_q_mem_reg->sqqd[i].bd_ring_base, + (u32) immrbar_virt_to_phys(ugeth-> + p_tx_bd_ring[i])); + out_be32(&ugeth->p_send_q_mem_reg->sqqd[i]. + last_bd_completed_address, + (u32) immrbar_virt_to_phys(endOfRing)); + } + } + + /* schedulerbasepointer */ + + if (ug_info->numQueuesTx > 1) { + /* scheduler exists only if more than 1 tx queue */ + ugeth->scheduler_offset = + qe_muram_alloc(sizeof(ucc_geth_scheduler_t), + UCC_GETH_SCHEDULER_ALIGNMENT); + if (IS_MURAM_ERR(ugeth->scheduler_offset)) { + ugeth_err + ("%s: Can not allocate DPRAM memory for p_scheduler.", + __FUNCTION__); + ucc_geth_memclean(ugeth); + return -ENOMEM; + } + + ugeth->p_scheduler = + (ucc_geth_scheduler_t *) qe_muram_addr(ugeth-> + scheduler_offset); + out_be32(&ugeth->p_tx_glbl_pram->schedulerbasepointer, + ugeth->scheduler_offset); + /* Zero out p_scheduler */ + memset(ugeth->p_scheduler, 0, sizeof(ucc_geth_scheduler_t)); + + /* Set values in scheduler */ + out_be32(&ugeth->p_scheduler->mblinterval, + ug_info->mblinterval); + out_be16(&ugeth->p_scheduler->nortsrbytetime, + ug_info->nortsrbytetime); + ugeth->p_scheduler->fracsiz = ug_info->fracsiz; + ugeth->p_scheduler->strictpriorityq = ug_info->strictpriorityq; + ugeth->p_scheduler->txasap = ug_info->txasap; + ugeth->p_scheduler->extrabw = ug_info->extrabw; + for (i = 0; i < NUM_TX_QUEUES; i++) + ugeth->p_scheduler->weightfactor[i] = + ug_info->weightfactor[i]; + + /* Set pointers to cpucount registers in scheduler */ + ugeth->p_cpucount[0] = &(ugeth->p_scheduler->cpucount0); + ugeth->p_cpucount[1] = &(ugeth->p_scheduler->cpucount1); + ugeth->p_cpucount[2] = &(ugeth->p_scheduler->cpucount2); + ugeth->p_cpucount[3] = &(ugeth->p_scheduler->cpucount3); + ugeth->p_cpucount[4] = &(ugeth->p_scheduler->cpucount4); + ugeth->p_cpucount[5] = &(ugeth->p_scheduler->cpucount5); + ugeth->p_cpucount[6] = &(ugeth->p_scheduler->cpucount6); + ugeth->p_cpucount[7] = &(ugeth->p_scheduler->cpucount7); + } + + /* schedulerbasepointer */ + /* TxRMON_PTR (statistics) */ + if (ug_info-> + statisticsMode & UCC_GETH_STATISTICS_GATHERING_MODE_FIRMWARE_TX) { + ugeth->tx_fw_statistics_pram_offset = + qe_muram_alloc(sizeof + (ucc_geth_tx_firmware_statistics_pram_t), + UCC_GETH_TX_STATISTICS_ALIGNMENT); + if (IS_MURAM_ERR(ugeth->tx_fw_statistics_pram_offset)) { + ugeth_err + ("%s: Can not allocate DPRAM memory for" + " p_tx_fw_statistics_pram.", __FUNCTION__); + ucc_geth_memclean(ugeth); + return -ENOMEM; + } + ugeth->p_tx_fw_statistics_pram = + (ucc_geth_tx_firmware_statistics_pram_t *) + qe_muram_addr(ugeth->tx_fw_statistics_pram_offset); + /* Zero out p_tx_fw_statistics_pram */ + memset(ugeth->p_tx_fw_statistics_pram, + 0, sizeof(ucc_geth_tx_firmware_statistics_pram_t)); + } + + /* temoder */ + /* Already has speed set */ + + if (ug_info->numQueuesTx > 1) + temoder |= TEMODER_SCHEDULER_ENABLE; + if (ug_info->ipCheckSumGenerate) + temoder |= TEMODER_IP_CHECKSUM_GENERATE; + temoder |= ((ug_info->numQueuesTx - 1) << TEMODER_NUM_OF_QUEUES_SHIFT); + out_be16(&ugeth->p_tx_glbl_pram->temoder, temoder); + + test = in_be16(&ugeth->p_tx_glbl_pram->temoder); + + /* Function code register value to be used later */ + function_code = QE_BMR_BYTE_ORDER_BO_MOT | UCC_FAST_FUNCTION_CODE_GBL; + /* Required for QE */ + + /* function code register */ + out_be32(&ugeth->p_tx_glbl_pram->tstate, ((u32) function_code) << 24); + + /* Rx global PRAM */ + /* Allocate global rx parameter RAM page */ + ugeth->rx_glbl_pram_offset = + qe_muram_alloc(sizeof(ucc_geth_rx_global_pram_t), + UCC_GETH_RX_GLOBAL_PRAM_ALIGNMENT); + if (IS_MURAM_ERR(ugeth->rx_glbl_pram_offset)) { + ugeth_err + ("%s: Can not allocate DPRAM memory for p_rx_glbl_pram.", + __FUNCTION__); + ucc_geth_memclean(ugeth); + return -ENOMEM; + } + ugeth->p_rx_glbl_pram = + (ucc_geth_rx_global_pram_t *) qe_muram_addr(ugeth-> + rx_glbl_pram_offset); + /* Zero out p_rx_glbl_pram */ + memset(ugeth->p_rx_glbl_pram, 0, sizeof(ucc_geth_rx_global_pram_t)); + + /* Fill global PRAM */ + + /* RQPTR */ + /* Size varies with number of Rx threads */ + ugeth->thread_dat_rx_offset = + qe_muram_alloc(numThreadsRxNumerical * + sizeof(ucc_geth_thread_data_rx_t), + UCC_GETH_THREAD_DATA_ALIGNMENT); + if (IS_MURAM_ERR(ugeth->thread_dat_rx_offset)) { + ugeth_err + ("%s: Can not allocate DPRAM memory for p_thread_data_rx.", + __FUNCTION__); + ucc_geth_memclean(ugeth); + return -ENOMEM; + } + + ugeth->p_thread_data_rx = + (ucc_geth_thread_data_rx_t *) qe_muram_addr(ugeth-> + thread_dat_rx_offset); + out_be32(&ugeth->p_rx_glbl_pram->rqptr, ugeth->thread_dat_rx_offset); + + /* typeorlen */ + out_be16(&ugeth->p_rx_glbl_pram->typeorlen, ug_info->typeorlen); + + /* rxrmonbaseptr (statistics) */ + if (ug_info-> + statisticsMode & UCC_GETH_STATISTICS_GATHERING_MODE_FIRMWARE_RX) { + ugeth->rx_fw_statistics_pram_offset = + qe_muram_alloc(sizeof + (ucc_geth_rx_firmware_statistics_pram_t), + UCC_GETH_RX_STATISTICS_ALIGNMENT); + if (IS_MURAM_ERR(ugeth->rx_fw_statistics_pram_offset)) { + ugeth_err + ("%s: Can not allocate DPRAM memory for" + " p_rx_fw_statistics_pram.", __FUNCTION__); + ucc_geth_memclean(ugeth); + return -ENOMEM; + } + ugeth->p_rx_fw_statistics_pram = + (ucc_geth_rx_firmware_statistics_pram_t *) + qe_muram_addr(ugeth->rx_fw_statistics_pram_offset); + /* Zero out p_rx_fw_statistics_pram */ + memset(ugeth->p_rx_fw_statistics_pram, 0, + sizeof(ucc_geth_rx_firmware_statistics_pram_t)); + } + + /* intCoalescingPtr */ + + /* Size varies with number of Rx queues */ + ugeth->rx_irq_coalescing_tbl_offset = + qe_muram_alloc(ug_info->numQueuesRx * + sizeof(ucc_geth_rx_interrupt_coalescing_entry_t), + UCC_GETH_RX_INTERRUPT_COALESCING_ALIGNMENT); + if (IS_MURAM_ERR(ugeth->rx_irq_coalescing_tbl_offset)) { + ugeth_err + ("%s: Can not allocate DPRAM memory for" + " p_rx_irq_coalescing_tbl.", __FUNCTION__); + ucc_geth_memclean(ugeth); + return -ENOMEM; + } + + ugeth->p_rx_irq_coalescing_tbl = + (ucc_geth_rx_interrupt_coalescing_table_t *) + qe_muram_addr(ugeth->rx_irq_coalescing_tbl_offset); + out_be32(&ugeth->p_rx_glbl_pram->intcoalescingptr, + ugeth->rx_irq_coalescing_tbl_offset); + + /* Fill interrupt coalescing table */ + for (i = 0; i < ug_info->numQueuesRx; i++) { + out_be32(&ugeth->p_rx_irq_coalescing_tbl->coalescingentry[i]. + interruptcoalescingmaxvalue, + ug_info->interruptcoalescingmaxvalue[i]); + out_be32(&ugeth->p_rx_irq_coalescing_tbl->coalescingentry[i]. + interruptcoalescingcounter, + ug_info->interruptcoalescingmaxvalue[i]); + } + + /* MRBLR */ + init_max_rx_buff_len(uf_info->max_rx_buf_length, + &ugeth->p_rx_glbl_pram->mrblr); + /* MFLR */ + out_be16(&ugeth->p_rx_glbl_pram->mflr, ug_info->maxFrameLength); + /* MINFLR */ + init_min_frame_len(ug_info->minFrameLength, + &ugeth->p_rx_glbl_pram->minflr, + &ugeth->p_rx_glbl_pram->mrblr); + /* MAXD1 */ + out_be16(&ugeth->p_rx_glbl_pram->maxd1, ug_info->maxD1Length); + /* MAXD2 */ + out_be16(&ugeth->p_rx_glbl_pram->maxd2, ug_info->maxD2Length); + + /* l2qt */ + l2qt = 0; + for (i = 0; i < UCC_GETH_VLAN_PRIORITY_MAX; i++) + l2qt |= (ug_info->l2qt[i] << (28 - 4 * i)); + out_be32(&ugeth->p_rx_glbl_pram->l2qt, l2qt); + + /* l3qt */ + for (j = 0; j < UCC_GETH_IP_PRIORITY_MAX; j += 8) { + l3qt = 0; + for (i = 0; i < 8; i++) + l3qt |= (ug_info->l3qt[j + i] << (28 - 4 * i)); + out_be32(&ugeth->p_rx_glbl_pram->l3qt[j], l3qt); + } + + /* vlantype */ + out_be16(&ugeth->p_rx_glbl_pram->vlantype, ug_info->vlantype); + + /* vlantci */ + out_be16(&ugeth->p_rx_glbl_pram->vlantci, ug_info->vlantci); + + /* ecamptr */ + out_be32(&ugeth->p_rx_glbl_pram->ecamptr, ug_info->ecamptr); + + /* RBDQPTR */ + /* Size varies with number of Rx queues */ + ugeth->rx_bd_qs_tbl_offset = + qe_muram_alloc(ug_info->numQueuesRx * + (sizeof(ucc_geth_rx_bd_queues_entry_t) + + sizeof(ucc_geth_rx_prefetched_bds_t)), + UCC_GETH_RX_BD_QUEUES_ALIGNMENT); + if (IS_MURAM_ERR(ugeth->rx_bd_qs_tbl_offset)) { + ugeth_err + ("%s: Can not allocate DPRAM memory for p_rx_bd_qs_tbl.", + __FUNCTION__); + ucc_geth_memclean(ugeth); + return -ENOMEM; + } + + ugeth->p_rx_bd_qs_tbl = + (ucc_geth_rx_bd_queues_entry_t *) qe_muram_addr(ugeth-> + rx_bd_qs_tbl_offset); + out_be32(&ugeth->p_rx_glbl_pram->rbdqptr, ugeth->rx_bd_qs_tbl_offset); + /* Zero out p_rx_bd_qs_tbl */ + memset(ugeth->p_rx_bd_qs_tbl, + 0, + ug_info->numQueuesRx * (sizeof(ucc_geth_rx_bd_queues_entry_t) + + sizeof(ucc_geth_rx_prefetched_bds_t))); + + /* Setup the table */ + /* Assume BD rings are already established */ + for (i = 0; i < ug_info->numQueuesRx; i++) { + if (ugeth->ug_info->uf_info.bd_mem_part == MEM_PART_SYSTEM) { + out_be32(&ugeth->p_rx_bd_qs_tbl[i].externalbdbaseptr, + (u32) virt_to_phys(ugeth->p_rx_bd_ring[i])); + } else if (ugeth->ug_info->uf_info.bd_mem_part == + MEM_PART_MURAM) { + out_be32(&ugeth->p_rx_bd_qs_tbl[i].externalbdbaseptr, + (u32) immrbar_virt_to_phys(ugeth-> + p_rx_bd_ring[i])); + } + /* rest of fields handled by QE */ + } + + /* remoder */ + /* Already has speed set */ + + if (ugeth->rx_extended_features) + remoder |= REMODER_RX_EXTENDED_FEATURES; + if (ug_info->rxExtendedFiltering) + remoder |= REMODER_RX_EXTENDED_FILTERING; + if (ug_info->dynamicMaxFrameLength) + remoder |= REMODER_DYNAMIC_MAX_FRAME_LENGTH; + if (ug_info->dynamicMinFrameLength) + remoder |= REMODER_DYNAMIC_MIN_FRAME_LENGTH; + remoder |= + ug_info->vlanOperationTagged << REMODER_VLAN_OPERATION_TAGGED_SHIFT; + remoder |= + ug_info-> + vlanOperationNonTagged << REMODER_VLAN_OPERATION_NON_TAGGED_SHIFT; + remoder |= ug_info->rxQoSMode << REMODER_RX_QOS_MODE_SHIFT; + remoder |= ((ug_info->numQueuesRx - 1) << REMODER_NUM_OF_QUEUES_SHIFT); + if (ug_info->ipCheckSumCheck) + remoder |= REMODER_IP_CHECKSUM_CHECK; + if (ug_info->ipAddressAlignment) + remoder |= REMODER_IP_ADDRESS_ALIGNMENT; + out_be32(&ugeth->p_rx_glbl_pram->remoder, remoder); + + /* Note that this function must be called */ + /* ONLY AFTER p_tx_fw_statistics_pram */ + /* andp_UccGethRxFirmwareStatisticsPram are allocated ! */ + init_firmware_statistics_gathering_mode((ug_info-> + statisticsMode & + UCC_GETH_STATISTICS_GATHERING_MODE_FIRMWARE_TX), + (ug_info->statisticsMode & + UCC_GETH_STATISTICS_GATHERING_MODE_FIRMWARE_RX), + &ugeth->p_tx_glbl_pram->txrmonbaseptr, + ugeth->tx_fw_statistics_pram_offset, + &ugeth->p_rx_glbl_pram->rxrmonbaseptr, + ugeth->rx_fw_statistics_pram_offset, + &ugeth->p_tx_glbl_pram->temoder, + &ugeth->p_rx_glbl_pram->remoder); + + /* function code register */ + ugeth->p_rx_glbl_pram->rstate = function_code; + + /* initialize extended filtering */ + if (ug_info->rxExtendedFiltering) { + if (!ug_info->extendedFilteringChainPointer) { + ugeth_err("%s: Null Extended Filtering Chain Pointer.", + __FUNCTION__); + ucc_geth_memclean(ugeth); + return -EINVAL; + } + + /* Allocate memory for extended filtering Mode Global + Parameters */ + ugeth->exf_glbl_param_offset = + qe_muram_alloc(sizeof(ucc_geth_exf_global_pram_t), + UCC_GETH_RX_EXTENDED_FILTERING_GLOBAL_PARAMETERS_ALIGNMENT); + if (IS_MURAM_ERR(ugeth->exf_glbl_param_offset)) { + ugeth_err + ("%s: Can not allocate DPRAM memory for" + " p_exf_glbl_param.", __FUNCTION__); + ucc_geth_memclean(ugeth); + return -ENOMEM; + } + + ugeth->p_exf_glbl_param = + (ucc_geth_exf_global_pram_t *) qe_muram_addr(ugeth-> + exf_glbl_param_offset); + out_be32(&ugeth->p_rx_glbl_pram->exfGlobalParam, + ugeth->exf_glbl_param_offset); + out_be32(&ugeth->p_exf_glbl_param->l2pcdptr, + (u32) ug_info->extendedFilteringChainPointer); + + } else { /* initialize 82xx style address filtering */ + + /* Init individual address recognition registers to disabled */ + + for (j = 0; j < NUM_OF_PADDRS; j++) + ugeth_82xx_filtering_clear_addr_in_paddr(ugeth, (u8) j); + + /* Create CQs for hash tables */ + if (ug_info->maxGroupAddrInHash > 0) { + INIT_LIST_HEAD(&ugeth->group_hash_q); + } + if (ug_info->maxIndAddrInHash > 0) { + INIT_LIST_HEAD(&ugeth->ind_hash_q); + } + p_82xx_addr_filt = + (ucc_geth_82xx_address_filtering_pram_t *) ugeth-> + p_rx_glbl_pram->addressfiltering; + + ugeth_82xx_filtering_clear_all_addr_in_hash(ugeth, + ENET_ADDR_TYPE_GROUP); + ugeth_82xx_filtering_clear_all_addr_in_hash(ugeth, + ENET_ADDR_TYPE_INDIVIDUAL); + } + + /* + * Initialize UCC at QE level + */ + + command = QE_INIT_TX_RX; + + /* Allocate shadow InitEnet command parameter structure. + * This is needed because after the InitEnet command is executed, + * the structure in DPRAM is released, because DPRAM is a premium + * resource. + * This shadow structure keeps a copy of what was done so that the + * allocated resources can be released when the channel is freed. + */ + if (!(ugeth->p_init_enet_param_shadow = + (ucc_geth_init_pram_t *) kmalloc(sizeof(ucc_geth_init_pram_t), + GFP_KERNEL))) { + ugeth_err + ("%s: Can not allocate memory for" + " p_UccInitEnetParamShadows.", __FUNCTION__); + ucc_geth_memclean(ugeth); + return -ENOMEM; + } + /* Zero out *p_init_enet_param_shadow */ + memset((char *)ugeth->p_init_enet_param_shadow, + 0, sizeof(ucc_geth_init_pram_t)); + + /* Fill shadow InitEnet command parameter structure */ + + ugeth->p_init_enet_param_shadow->resinit1 = + ENET_INIT_PARAM_MAGIC_RES_INIT1; + ugeth->p_init_enet_param_shadow->resinit2 = + ENET_INIT_PARAM_MAGIC_RES_INIT2; + ugeth->p_init_enet_param_shadow->resinit3 = + ENET_INIT_PARAM_MAGIC_RES_INIT3; + ugeth->p_init_enet_param_shadow->resinit4 = + ENET_INIT_PARAM_MAGIC_RES_INIT4; + ugeth->p_init_enet_param_shadow->resinit5 = + ENET_INIT_PARAM_MAGIC_RES_INIT5; + ugeth->p_init_enet_param_shadow->rgftgfrxglobal |= + ((u32) ug_info->numThreadsRx) << ENET_INIT_PARAM_RGF_SHIFT; + ugeth->p_init_enet_param_shadow->rgftgfrxglobal |= + ((u32) ug_info->numThreadsTx) << ENET_INIT_PARAM_TGF_SHIFT; + + ugeth->p_init_enet_param_shadow->rgftgfrxglobal |= + ugeth->rx_glbl_pram_offset | ug_info->riscRx; + if ((ug_info->largestexternallookupkeysize != + QE_FLTR_LARGEST_EXTERNAL_TABLE_LOOKUP_KEY_SIZE_NONE) + && (ug_info->largestexternallookupkeysize != + QE_FLTR_LARGEST_EXTERNAL_TABLE_LOOKUP_KEY_SIZE_8_BYTES) + && (ug_info->largestexternallookupkeysize != + QE_FLTR_LARGEST_EXTERNAL_TABLE_LOOKUP_KEY_SIZE_16_BYTES)) { + ugeth_err("%s: Invalid largest External Lookup Key Size.", + __FUNCTION__); + ucc_geth_memclean(ugeth); + return -EINVAL; + } + ugeth->p_init_enet_param_shadow->largestexternallookupkeysize = + ug_info->largestexternallookupkeysize; + size = sizeof(ucc_geth_thread_rx_pram_t); + if (ug_info->rxExtendedFiltering) { + size += THREAD_RX_PRAM_ADDITIONAL_FOR_EXTENDED_FILTERING; + if (ug_info->largestexternallookupkeysize == + QE_FLTR_TABLE_LOOKUP_KEY_SIZE_8_BYTES) + size += + THREAD_RX_PRAM_ADDITIONAL_FOR_EXTENDED_FILTERING_8; + if (ug_info->largestexternallookupkeysize == + QE_FLTR_TABLE_LOOKUP_KEY_SIZE_16_BYTES) + size += + THREAD_RX_PRAM_ADDITIONAL_FOR_EXTENDED_FILTERING_16; + } + + if ((ret_val = fill_init_enet_entries(ugeth, &(ugeth-> + p_init_enet_param_shadow->rxthread[0]), + (u8) (numThreadsRxNumerical + 1) + /* Rx needs one extra for terminator */ + , size, UCC_GETH_THREAD_RX_PRAM_ALIGNMENT, + ug_info->riscRx, 1)) != 0) { + ugeth_err("%s: Can not fill p_init_enet_param_shadow.", + __FUNCTION__); + ucc_geth_memclean(ugeth); + return ret_val; + } + + ugeth->p_init_enet_param_shadow->txglobal = + ugeth->tx_glbl_pram_offset | ug_info->riscTx; + if ((ret_val = + fill_init_enet_entries(ugeth, + &(ugeth->p_init_enet_param_shadow-> + txthread[0]), numThreadsTxNumerical, + sizeof(ucc_geth_thread_tx_pram_t), + UCC_GETH_THREAD_TX_PRAM_ALIGNMENT, + ug_info->riscTx, 0)) != 0) { + ugeth_err("%s: Can not fill p_init_enet_param_shadow.", + __FUNCTION__); + ucc_geth_memclean(ugeth); + return ret_val; + } + + /* Load Rx bds with buffers */ + for (i = 0; i < ug_info->numQueuesRx; i++) { + if ((ret_val = rx_bd_buffer_set(ugeth, (u8) i)) != 0) { + ugeth_err("%s: Can not fill Rx bds with buffers.", + __FUNCTION__); + ucc_geth_memclean(ugeth); + return ret_val; + } + } + + /* Allocate InitEnet command parameter structure */ + init_enet_pram_offset = qe_muram_alloc(sizeof(ucc_geth_init_pram_t), 4); + if (IS_MURAM_ERR(init_enet_pram_offset)) { + ugeth_err + ("%s: Can not allocate DPRAM memory for p_init_enet_pram.", + __FUNCTION__); + ucc_geth_memclean(ugeth); + return -ENOMEM; + } + p_init_enet_pram = + (ucc_geth_init_pram_t *) qe_muram_addr(init_enet_pram_offset); + + /* Copy shadow InitEnet command parameter structure into PRAM */ + p_init_enet_pram->resinit1 = ugeth->p_init_enet_param_shadow->resinit1; + p_init_enet_pram->resinit2 = ugeth->p_init_enet_param_shadow->resinit2; + p_init_enet_pram->resinit3 = ugeth->p_init_enet_param_shadow->resinit3; + p_init_enet_pram->resinit4 = ugeth->p_init_enet_param_shadow->resinit4; + out_be16(&p_init_enet_pram->resinit5, + ugeth->p_init_enet_param_shadow->resinit5); + p_init_enet_pram->largestexternallookupkeysize = + ugeth->p_init_enet_param_shadow->largestexternallookupkeysize; + out_be32(&p_init_enet_pram->rgftgfrxglobal, + ugeth->p_init_enet_param_shadow->rgftgfrxglobal); + for (i = 0; i < ENET_INIT_PARAM_MAX_ENTRIES_RX; i++) + out_be32(&p_init_enet_pram->rxthread[i], + ugeth->p_init_enet_param_shadow->rxthread[i]); + out_be32(&p_init_enet_pram->txglobal, + ugeth->p_init_enet_param_shadow->txglobal); + for (i = 0; i < ENET_INIT_PARAM_MAX_ENTRIES_TX; i++) + out_be32(&p_init_enet_pram->txthread[i], + ugeth->p_init_enet_param_shadow->txthread[i]); + + /* Issue QE command */ + cecr_subblock = + ucc_fast_get_qe_cr_subblock(ugeth->ug_info->uf_info.ucc_num); + qe_issue_cmd(command, cecr_subblock, (u8) QE_CR_PROTOCOL_ETHERNET, + init_enet_pram_offset); + + /* Free InitEnet command parameter */ + qe_muram_free(init_enet_pram_offset); + + return 0; +} + +/* returns a net_device_stats structure pointer */ +static struct net_device_stats *ucc_geth_get_stats(struct net_device *dev) +{ + ucc_geth_private_t *ugeth = netdev_priv(dev); + + return &(ugeth->stats); +} + +/* ucc_geth_timeout gets called when a packet has not been + * transmitted after a set amount of time. + * For now, assume that clearing out all the structures, and + * starting over will fix the problem. */ +static void ucc_geth_timeout(struct net_device *dev) +{ + ucc_geth_private_t *ugeth = netdev_priv(dev); + + ugeth_vdbg("%s: IN", __FUNCTION__); + + ugeth->stats.tx_errors++; + + ugeth_dump_regs(ugeth); + + if (dev->flags & IFF_UP) { + ucc_geth_stop(ugeth); + ucc_geth_startup(ugeth); + } + + netif_schedule(dev); +} + +/* This is called by the kernel when a frame is ready for transmission. */ +/* It is pointed to by the dev->hard_start_xmit function pointer */ +static int ucc_geth_start_xmit(struct sk_buff *skb, struct net_device *dev) +{ + ucc_geth_private_t *ugeth = netdev_priv(dev); + u8 *bd; /* BD pointer */ + u32 bd_status; + u8 txQ = 0; + + ugeth_vdbg("%s: IN", __FUNCTION__); + + spin_lock_irq(&ugeth->lock); + + ugeth->stats.tx_bytes += skb->len; + + /* Start from the next BD that should be filled */ + bd = ugeth->txBd[txQ]; + bd_status = BD_STATUS_AND_LENGTH(bd); + /* Save the skb pointer so we can free it later */ + ugeth->tx_skbuff[txQ][ugeth->skb_curtx[txQ]] = skb; + + /* Update the current skb pointer (wrapping if this was the last) */ + ugeth->skb_curtx[txQ] = + (ugeth->skb_curtx[txQ] + + 1) & TX_RING_MOD_MASK(ugeth->ug_info->bdRingLenTx[txQ]); + + /* set up the buffer descriptor */ + BD_BUFFER_SET(bd, + dma_map_single(NULL, skb->data, skb->len, DMA_TO_DEVICE)); + + //printk(KERN_DEBUG"skb->data is 0x%x\n",skb->data); + + bd_status = (bd_status & T_W) | T_R | T_I | T_L | skb->len; + + BD_STATUS_AND_LENGTH_SET(bd, bd_status); + + dev->trans_start = jiffies; + + /* Move to next BD in the ring */ + if (!(bd_status & T_W)) + ugeth->txBd[txQ] = bd + UCC_GETH_SIZE_OF_BD; + else + ugeth->txBd[txQ] = ugeth->p_tx_bd_ring[txQ]; + + /* If the next BD still needs to be cleaned up, then the bds + are full. We need to tell the kernel to stop sending us stuff. */ + if (bd == ugeth->confBd[txQ]) { + if (!netif_queue_stopped(dev)) + netif_stop_queue(dev); + } + + if (ugeth->p_scheduler) { + ugeth->cpucount[txQ]++; + /* Indicate to QE that there are more Tx bds ready for + transmission */ + /* This is done by writing a running counter of the bd + count to the scheduler PRAM. */ + out_be16(ugeth->p_cpucount[txQ], ugeth->cpucount[txQ]); + } + + spin_unlock_irq(&ugeth->lock); + + return 0; +} + +static int ucc_geth_rx(ucc_geth_private_t *ugeth, u8 rxQ, int rx_work_limit) +{ + struct sk_buff *skb; + u8 *bd; + u16 length, howmany = 0; + u32 bd_status; + u8 *bdBuffer; + + ugeth_vdbg("%s: IN", __FUNCTION__); + + spin_lock(&ugeth->lock); + /* collect received buffers */ + bd = ugeth->rxBd[rxQ]; + + bd_status = BD_STATUS_AND_LENGTH(bd); + + /* while there are received buffers and BD is full (~R_E) */ + while (!((bd_status & (R_E)) || (--rx_work_limit < 0))) { + bdBuffer = (u8 *) BD_BUFFER(bd); + length = (u16) ((bd_status & BD_LENGTH_MASK) - 4); + skb = ugeth->rx_skbuff[rxQ][ugeth->skb_currx[rxQ]]; + + /* determine whether buffer is first, last, first and last + (single buffer frame) or middle (not first and not last) */ + if (!skb || + (!(bd_status & (R_F | R_L))) || + (bd_status & R_ERRORS_FATAL)) { + ugeth_vdbg("%s, %d: ERROR!!! skb - 0x%08x", + __FUNCTION__, __LINE__, (u32) skb); + if (skb) + dev_kfree_skb_any(skb); + + ugeth->rx_skbuff[rxQ][ugeth->skb_currx[rxQ]] = NULL; + ugeth->stats.rx_dropped++; + } else { + ugeth->stats.rx_packets++; + howmany++; + + /* Prep the skb for the packet */ + skb_put(skb, length); + + /* Tell the skb what kind of packet this is */ + skb->protocol = eth_type_trans(skb, ugeth->dev); + + ugeth->stats.rx_bytes += length; + /* Send the packet up the stack */ +#ifdef CONFIG_UGETH_NAPI + netif_receive_skb(skb); +#else + netif_rx(skb); +#endif /* CONFIG_UGETH_NAPI */ + } + + ugeth->dev->last_rx = jiffies; + + skb = get_new_skb(ugeth, bd); + if (!skb) { + ugeth_warn("%s: No Rx Data Buffer", __FUNCTION__); + spin_unlock(&ugeth->lock); + ugeth->stats.rx_dropped++; + break; + } + + ugeth->rx_skbuff[rxQ][ugeth->skb_currx[rxQ]] = skb; + + /* update to point at the next skb */ + ugeth->skb_currx[rxQ] = + (ugeth->skb_currx[rxQ] + + 1) & RX_RING_MOD_MASK(ugeth->ug_info->bdRingLenRx[rxQ]); + + if (bd_status & R_W) + bd = ugeth->p_rx_bd_ring[rxQ]; + else + bd += UCC_GETH_SIZE_OF_BD; + + bd_status = BD_STATUS_AND_LENGTH(bd); + } + + ugeth->rxBd[rxQ] = bd; + spin_unlock(&ugeth->lock); + return howmany; +} + +static int ucc_geth_tx(struct net_device *dev, u8 txQ) +{ + /* Start from the next BD that should be filled */ + ucc_geth_private_t *ugeth = netdev_priv(dev); + u8 *bd; /* BD pointer */ + u32 bd_status; + + bd = ugeth->confBd[txQ]; + bd_status = BD_STATUS_AND_LENGTH(bd); + + /* Normal processing. */ + while ((bd_status & T_R) == 0) { + /* BD contains already transmitted buffer. */ + /* Handle the transmitted buffer and release */ + /* the BD to be used with the current frame */ + + if ((bd = ugeth->txBd[txQ]) && (netif_queue_stopped(dev) == 0)) + break; + + ugeth->stats.tx_packets++; + + /* Free the sk buffer associated with this TxBD */ + dev_kfree_skb_irq(ugeth-> + tx_skbuff[txQ][ugeth->skb_dirtytx[txQ]]); + ugeth->tx_skbuff[txQ][ugeth->skb_dirtytx[txQ]] = NULL; + ugeth->skb_dirtytx[txQ] = + (ugeth->skb_dirtytx[txQ] + + 1) & TX_RING_MOD_MASK(ugeth->ug_info->bdRingLenTx[txQ]); + + /* We freed a buffer, so now we can restart transmission */ + if (netif_queue_stopped(dev)) + netif_wake_queue(dev); + + /* Advance the confirmation BD pointer */ + if (!(bd_status & T_W)) + ugeth->confBd[txQ] += UCC_GETH_SIZE_OF_BD; + else + ugeth->confBd[txQ] = ugeth->p_tx_bd_ring[txQ]; + } + return 0; +} + +#ifdef CONFIG_UGETH_NAPI +static int ucc_geth_poll(struct net_device *dev, int *budget) +{ + ucc_geth_private_t *ugeth = netdev_priv(dev); + int howmany; + int rx_work_limit = *budget; + u8 rxQ = 0; + + if (rx_work_limit > dev->quota) + rx_work_limit = dev->quota; + + howmany = ucc_geth_rx(ugeth, rxQ, rx_work_limit); + + dev->quota -= howmany; + rx_work_limit -= howmany; + *budget -= howmany; + + if (rx_work_limit >= 0) + netif_rx_complete(dev); + + return (rx_work_limit < 0) ? 1 : 0; +} +#endif /* CONFIG_UGETH_NAPI */ + +static irqreturn_t ucc_geth_irq_handler(int irq, void *info, + struct pt_regs *regs) +{ + struct net_device *dev = (struct net_device *)info; + ucc_geth_private_t *ugeth = netdev_priv(dev); + ucc_fast_private_t *uccf; + ucc_geth_info_t *ug_info; + register u32 ucce = 0; + register u32 bit_mask = UCCE_RXBF_SINGLE_MASK; + register u32 tx_mask = UCCE_TXBF_SINGLE_MASK; + register u8 i; + + ugeth_vdbg("%s: IN", __FUNCTION__); + + if (!ugeth) + return IRQ_NONE; + + uccf = ugeth->uccf; + ug_info = ugeth->ug_info; + + do { + ucce |= (u32) (in_be32(uccf->p_ucce) & in_be32(uccf->p_uccm)); + + /* clear event bits for next time */ + /* Side effect here is to mask ucce variable + for future processing below. */ + out_be32(uccf->p_ucce, ucce); /* Clear with ones, + but only bits in UCCM */ + + /* We ignore Tx interrupts because Tx confirmation is + done inside Tx routine */ + + for (i = 0; i < ug_info->numQueuesRx; i++) { + if (ucce & bit_mask) + ucc_geth_rx(ugeth, i, + (int)ugeth->ug_info-> + bdRingLenRx[i]); + ucce &= ~bit_mask; + bit_mask <<= 1; + } + + for (i = 0; i < ug_info->numQueuesTx; i++) { + if (ucce & tx_mask) + ucc_geth_tx(dev, i); + ucce &= ~tx_mask; + tx_mask <<= 1; + } + + /* Exceptions */ + if (ucce & UCCE_BSY) { + ugeth_vdbg("Got BUSY irq!!!!"); + ugeth->stats.rx_errors++; + ucce &= ~UCCE_BSY; + } + if (ucce & UCCE_OTHER) { + ugeth_vdbg("Got frame with error (ucce - 0x%08x)!!!!", + ucce); + ugeth->stats.rx_errors++; + ucce &= ~ucce; + } + } + while (ucce); + + return IRQ_HANDLED; +} + +static irqreturn_t phy_interrupt(int irq, void *dev_id, struct pt_regs *regs) +{ + struct net_device *dev = (struct net_device *)dev_id; + ucc_geth_private_t *ugeth = netdev_priv(dev); + + ugeth_vdbg("%s: IN", __FUNCTION__); + + /* Clear the interrupt */ + mii_clear_phy_interrupt(ugeth->mii_info); + + /* Disable PHY interrupts */ + mii_configure_phy_interrupt(ugeth->mii_info, MII_INTERRUPT_DISABLED); + + /* Schedule the phy change */ + schedule_work(&ugeth->tq); + + return IRQ_HANDLED; +} + +/* Scheduled by the phy_interrupt/timer to handle PHY changes */ +static void ugeth_phy_change(void *data) +{ + struct net_device *dev = (struct net_device *)data; + ucc_geth_private_t *ugeth = netdev_priv(dev); + ucc_geth_t *ug_regs; + int result = 0; + + ugeth_vdbg("%s: IN", __FUNCTION__); + + ug_regs = ugeth->ug_regs; + + /* Delay to give the PHY a chance to change the + * register state */ + msleep(1); + + /* Update the link, speed, duplex */ + result = ugeth->mii_info->phyinfo->read_status(ugeth->mii_info); + + /* Adjust the known status as long as the link + * isn't still coming up */ + if ((0 == result) || (ugeth->mii_info->link == 0)) + adjust_link(dev); + + /* Reenable interrupts, if needed */ + if (ugeth->ug_info->board_flags & FSL_UGETH_BRD_HAS_PHY_INTR) + mii_configure_phy_interrupt(ugeth->mii_info, + MII_INTERRUPT_ENABLED); +} + +/* Called every so often on systems that don't interrupt + * the core for PHY changes */ +static void ugeth_phy_timer(unsigned long data) +{ + struct net_device *dev = (struct net_device *)data; + ucc_geth_private_t *ugeth = netdev_priv(dev); + + schedule_work(&ugeth->tq); + + mod_timer(&ugeth->phy_info_timer, jiffies + PHY_CHANGE_TIME * HZ); +} + +/* Keep trying aneg for some time + * If, after GFAR_AN_TIMEOUT seconds, it has not + * finished, we switch to forced. + * Either way, once the process has completed, we either + * request the interrupt, or switch the timer over to + * using ugeth_phy_timer to check status */ +static void ugeth_phy_startup_timer(unsigned long data) +{ + struct ugeth_mii_info *mii_info = (struct ugeth_mii_info *)data; + ucc_geth_private_t *ugeth = netdev_priv(mii_info->dev); + static int secondary = UGETH_AN_TIMEOUT; + int result; + + /* Configure the Auto-negotiation */ + result = mii_info->phyinfo->config_aneg(mii_info); + + /* If autonegotiation failed to start, and + * we haven't timed out, reset the timer, and return */ + if (result && secondary--) { + mod_timer(&ugeth->phy_info_timer, jiffies + HZ); + return; + } else if (result) { + /* Couldn't start autonegotiation. + * Try switching to forced */ + mii_info->autoneg = 0; + result = mii_info->phyinfo->config_aneg(mii_info); + + /* Forcing failed! Give up */ + if (result) { + ugeth_err("%s: Forcing failed!", mii_info->dev->name); + return; + } + } + + /* Kill the timer so it can be restarted */ + del_timer_sync(&ugeth->phy_info_timer); + + /* Grab the PHY interrupt, if necessary/possible */ + if (ugeth->ug_info->board_flags & FSL_UGETH_BRD_HAS_PHY_INTR) { + if (request_irq(ugeth->ug_info->phy_interrupt, + phy_interrupt, + SA_SHIRQ, "phy_interrupt", mii_info->dev) < 0) { + ugeth_err("%s: Can't get IRQ %d (PHY)", + mii_info->dev->name, + ugeth->ug_info->phy_interrupt); + } else { + mii_configure_phy_interrupt(ugeth->mii_info, + MII_INTERRUPT_ENABLED); + return; + } + } + + /* Start the timer again, this time in order to + * handle a change in status */ + init_timer(&ugeth->phy_info_timer); + ugeth->phy_info_timer.function = &ugeth_phy_timer; + ugeth->phy_info_timer.data = (unsigned long)mii_info->dev; + mod_timer(&ugeth->phy_info_timer, jiffies + PHY_CHANGE_TIME * HZ); +} + +/* Called when something needs to use the ethernet device */ +/* Returns 0 for success. */ +static int ucc_geth_open(struct net_device *dev) +{ + ucc_geth_private_t *ugeth = netdev_priv(dev); + int err; + + ugeth_vdbg("%s: IN", __FUNCTION__); + + /* Test station address */ + if (dev->dev_addr[0] & ENET_GROUP_ADDR) { + ugeth_err("%s: Multicast address used for station address" + " - is this what you wanted?", __FUNCTION__); + return -EINVAL; + } + + err = ucc_geth_startup(ugeth); + if (err) { + ugeth_err("%s: Cannot configure net device, aborting.", + dev->name); + return err; + } + + err = adjust_enet_interface(ugeth); + if (err) { + ugeth_err("%s: Cannot configure net device, aborting.", + dev->name); + return err; + } + + /* Set MACSTNADDR1, MACSTNADDR2 */ + /* For more details see the hardware spec. */ + init_mac_station_addr_regs(dev->dev_addr[0], + dev->dev_addr[1], + dev->dev_addr[2], + dev->dev_addr[3], + dev->dev_addr[4], + dev->dev_addr[5], + &ugeth->ug_regs->macstnaddr1, + &ugeth->ug_regs->macstnaddr2); + + err = init_phy(dev); + if (err) { + ugeth_err("%s: Cannot initialzie PHY, aborting.", dev->name); + return err; + } +#ifndef CONFIG_UGETH_NAPI + err = + request_irq(ugeth->ug_info->uf_info.irq, ucc_geth_irq_handler, 0, + "UCC Geth", dev); + if (err) { + ugeth_err("%s: Cannot get IRQ for net device, aborting.", + dev->name); + ucc_geth_stop(ugeth); + return err; + } +#endif /* CONFIG_UGETH_NAPI */ + + /* Set up the PHY change work queue */ + INIT_WORK(&ugeth->tq, ugeth_phy_change, dev); + + init_timer(&ugeth->phy_info_timer); + ugeth->phy_info_timer.function = &ugeth_phy_startup_timer; + ugeth->phy_info_timer.data = (unsigned long)ugeth->mii_info; + mod_timer(&ugeth->phy_info_timer, jiffies + HZ); + + err = ugeth_enable(ugeth, COMM_DIR_RX_AND_TX); + if (err) { + ugeth_err("%s: Cannot enable net device, aborting.", dev->name); + ucc_geth_stop(ugeth); + return err; + } + + netif_start_queue(dev); + + return err; +} + +/* Stops the kernel queue, and halts the controller */ +static int ucc_geth_close(struct net_device *dev) +{ + ucc_geth_private_t *ugeth = netdev_priv(dev); + + ugeth_vdbg("%s: IN", __FUNCTION__); + + ucc_geth_stop(ugeth); + + /* Shutdown the PHY */ + if (ugeth->mii_info->phyinfo->close) + ugeth->mii_info->phyinfo->close(ugeth->mii_info); + + kfree(ugeth->mii_info); + + netif_stop_queue(dev); + + return 0; +} + +struct ethtool_ops ucc_geth_ethtool_ops = { + .get_settings = NULL, + .get_drvinfo = NULL, + .get_regs_len = NULL, + .get_regs = NULL, + .get_link = NULL, + .get_coalesce = NULL, + .set_coalesce = NULL, + .get_ringparam = NULL, + .set_ringparam = NULL, + .get_strings = NULL, + .get_stats_count = NULL, + .get_ethtool_stats = NULL, +}; + +static int ucc_geth_probe(struct device *device) +{ + struct platform_device *pdev = to_platform_device(device); + struct ucc_geth_platform_data *ugeth_pdata; + struct net_device *dev = NULL; + struct ucc_geth_private *ugeth = NULL; + struct ucc_geth_info *ug_info; + int err; + static int mii_mng_configured = 0; + + ugeth_vdbg("%s: IN", __FUNCTION__); + + ugeth_pdata = (struct ucc_geth_platform_data *)pdev->dev.platform_data; + + ug_info = &ugeth_info[pdev->id]; + ug_info->uf_info.ucc_num = pdev->id; + ug_info->uf_info.rx_clock = ugeth_pdata->rx_clock; + ug_info->uf_info.tx_clock = ugeth_pdata->tx_clock; + ug_info->uf_info.regs = ugeth_pdata->phy_reg_addr; + ug_info->uf_info.irq = platform_get_irq(pdev, 0); + ug_info->phy_address = ugeth_pdata->phy_id; + ug_info->enet_interface = ugeth_pdata->phy_interface; + ug_info->board_flags = ugeth_pdata->board_flags; + ug_info->phy_interrupt = ugeth_pdata->phy_interrupt; + + printk(KERN_INFO "ucc_geth: UCC%1d at 0x%8x (irq = %d) \n", + ug_info->uf_info.ucc_num + 1, ug_info->uf_info.regs, + ug_info->uf_info.irq); + + if (ug_info == NULL) { + ugeth_err("%s: [%d] Missing additional data!", __FUNCTION__, + pdev->id); + return -ENODEV; + } + + if (!mii_mng_configured) { + ucc_set_qe_mux_mii_mng(ug_info->uf_info.ucc_num); + mii_mng_configured = 1; + } + + /* Create an ethernet device instance */ + dev = alloc_etherdev(sizeof(*ugeth)); + + if (dev == NULL) + return -ENOMEM; + + ugeth = netdev_priv(dev); + spin_lock_init(&ugeth->lock); + + dev_set_drvdata(device, dev); + + /* Set the dev->base_addr to the gfar reg region */ + dev->base_addr = (unsigned long)(ug_info->uf_info.regs); + + SET_MODULE_OWNER(dev); + SET_NETDEV_DEV(dev, device); + + /* Fill in the dev structure */ + dev->open = ucc_geth_open; + dev->hard_start_xmit = ucc_geth_start_xmit; + dev->tx_timeout = ucc_geth_timeout; + dev->watchdog_timeo = TX_TIMEOUT; +#ifdef CONFIG_UGETH_NAPI + dev->poll = ucc_geth_poll; + dev->weight = UCC_GETH_DEV_WEIGHT; +#endif /* CONFIG_UGETH_NAPI */ + dev->stop = ucc_geth_close; + dev->get_stats = ucc_geth_get_stats; +// dev->change_mtu = ucc_geth_change_mtu; + dev->mtu = 1500; + dev->set_multicast_list = ucc_geth_set_multi; + dev->ethtool_ops = &ucc_geth_ethtool_ops; + + err = register_netdev(dev); + if (err) { + ugeth_err("%s: Cannot register net device, aborting.", + dev->name); + free_netdev(dev); + return err; + } + + ugeth->ug_info = ug_info; + ugeth->dev = dev; + memcpy(dev->dev_addr, ugeth_pdata->mac_addr, 6); + + return 0; +} + +static int ucc_geth_remove(struct device *device) +{ + struct net_device *dev = dev_get_drvdata(device); + struct ucc_geth_private *ugeth = netdev_priv(dev); + + dev_set_drvdata(device, NULL); + ucc_geth_memclean(ugeth); + free_netdev(dev); + + return 0; +} + +/* Structure for a device driver */ +static struct device_driver ucc_geth_driver = { + .name = DRV_NAME, + .bus = &platform_bus_type, + .probe = ucc_geth_probe, + .remove = ucc_geth_remove, +}; + +static int __init ucc_geth_init(void) +{ + int i; + printk(KERN_INFO "ucc_geth: " DRV_DESC "\n"); + for (i = 0; i < 8; i++) + memcpy(&(ugeth_info[i]), &ugeth_primary_info, + sizeof(ugeth_primary_info)); + + return driver_register(&ucc_geth_driver); +} + +static void __exit ucc_geth_exit(void) +{ + driver_unregister(&ucc_geth_driver); +} + +module_init(ucc_geth_init); +module_exit(ucc_geth_exit); + +MODULE_AUTHOR("Freescale Semiconductor, Inc"); +MODULE_DESCRIPTION(DRV_DESC); +MODULE_LICENSE("GPL"); diff --git a/drivers/net/ucc_geth.h b/drivers/net/ucc_geth.h new file mode 100644 index 00000000000..005965f5dd9 --- /dev/null +++ b/drivers/net/ucc_geth.h @@ -0,0 +1,1339 @@ +/* + * Copyright (C) Freescale Semicondutor, Inc. 2006. All rights reserved. + * + * Author: Shlomi Gridish + * + * Description: + * Internal header file for UCC Gigabit Ethernet unit routines. + * + * Changelog: + * Jun 28, 2006 Li Yang + * - Rearrange code and style fixes + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ +#ifndef __UCC_GETH_H__ +#define __UCC_GETH_H__ + +#include +#include +#include + +#include +#include + +#include +#include + +#define NUM_TX_QUEUES 8 +#define NUM_RX_QUEUES 8 +#define NUM_BDS_IN_PREFETCHED_BDS 4 +#define TX_IP_OFFSET_ENTRY_MAX 8 +#define NUM_OF_PADDRS 4 +#define ENET_INIT_PARAM_MAX_ENTRIES_RX 9 +#define ENET_INIT_PARAM_MAX_ENTRIES_TX 8 + +typedef struct ucc_mii_mng { + u32 miimcfg; /* MII management configuration reg */ + u32 miimcom; /* MII management command reg */ + u32 miimadd; /* MII management address reg */ + u32 miimcon; /* MII management control reg */ + u32 miimstat; /* MII management status reg */ + u32 miimind; /* MII management indication reg */ +} __attribute__ ((packed)) ucc_mii_mng_t; + +typedef struct ucc_geth { + ucc_fast_t uccf; + + u32 maccfg1; /* mac configuration reg. 1 */ + u32 maccfg2; /* mac configuration reg. 2 */ + u32 ipgifg; /* interframe gap reg. */ + u32 hafdup; /* half-duplex reg. */ + u8 res1[0x10]; + ucc_mii_mng_t miimng; /* MII management structure */ + u32 ifctl; /* interface control reg */ + u32 ifstat; /* interface statux reg */ + u32 macstnaddr1; /* mac station address part 1 reg */ + u32 macstnaddr2; /* mac station address part 2 reg */ + u8 res2[0x8]; + u32 uempr; /* UCC Ethernet Mac parameter reg */ + u32 utbipar; /* UCC tbi address reg */ + u16 uescr; /* UCC Ethernet statistics control reg */ + u8 res3[0x180 - 0x15A]; + u32 tx64; /* Total number of frames (including bad + frames) transmitted that were exactly of the + minimal length (64 for un tagged, 68 for + tagged, or with length exactly equal to the + parameter MINLength */ + u32 tx127; /* Total number of frames (including bad + frames) transmitted that were between + MINLength (Including FCS length==4) and 127 + octets */ + u32 tx255; /* Total number of frames (including bad + frames) transmitted that were between 128 + (Including FCS length==4) and 255 octets */ + u32 rx64; /* Total number of frames received including + bad frames that were exactly of the mninimal + length (64 bytes) */ + u32 rx127; /* Total number of frames (including bad + frames) received that were between MINLength + (Including FCS length==4) and 127 octets */ + u32 rx255; /* Total number of frames (including bad + frames) received that were between 128 + (Including FCS length==4) and 255 octets */ + u32 txok; /* Total number of octets residing in frames + that where involved in succesfull + transmission */ + u16 txcf; /* Total number of PAUSE control frames + transmitted by this MAC */ + u8 res4[0x2]; + u32 tmca; /* Total number of frames that were transmitted + succesfully with the group address bit set + that are not broadcast frames */ + u32 tbca; /* Total number of frames transmitted + succesfully that had destination address + field equal to the broadcast address */ + u32 rxfok; /* Total number of frames received OK */ + u32 rxbok; /* Total number of octets received OK */ + u32 rbyt; /* Total number of octets received including + octets in bad frames. Must be implemented in + HW because it includes octets in frames that + never even reach the UCC */ + u32 rmca; /* Total number of frames that were received + succesfully with the group address bit set + that are not broadcast frames */ + u32 rbca; /* Total number of frames received succesfully + that had destination address equal to the + broadcast address */ + u32 scar; /* Statistics carry register */ + u32 scam; /* Statistics caryy mask register */ + u8 res5[0x200 - 0x1c4]; +} __attribute__ ((packed)) ucc_geth_t; + +/* UCC GETH TEMODR Register */ +#define TEMODER_TX_RMON_STATISTICS_ENABLE 0x0100 /* enable Tx statistics + */ +#define TEMODER_SCHEDULER_ENABLE 0x2000 /* enable scheduler */ +#define TEMODER_IP_CHECKSUM_GENERATE 0x0400 /* generate IPv4 + checksums */ +#define TEMODER_PERFORMANCE_OPTIMIZATION_MODE1 0x0200 /* enable performance + optimization + enhancement (mode1) */ +#define TEMODER_RMON_STATISTICS 0x0100 /* enable tx statistics + */ +#define TEMODER_NUM_OF_QUEUES_SHIFT (15-15) /* Number of queues << + shift */ + +/* UCC GETH TEMODR Register */ +#define REMODER_RX_RMON_STATISTICS_ENABLE 0x00001000 /* enable Rx + statistics */ +#define REMODER_RX_EXTENDED_FEATURES 0x80000000 /* enable + extended + features */ +#define REMODER_VLAN_OPERATION_TAGGED_SHIFT (31-9 ) /* vlan operation + tagged << shift */ +#define REMODER_VLAN_OPERATION_NON_TAGGED_SHIFT (31-10) /* vlan operation non + tagged << shift */ +#define REMODER_RX_QOS_MODE_SHIFT (31-15) /* rx QoS mode << shift + */ +#define REMODER_RMON_STATISTICS 0x00001000 /* enable rx + statistics */ +#define REMODER_RX_EXTENDED_FILTERING 0x00000800 /* extended + filtering + vs. + mpc82xx-like + filtering */ +#define REMODER_NUM_OF_QUEUES_SHIFT (31-23) /* Number of queues << + shift */ +#define REMODER_DYNAMIC_MAX_FRAME_LENGTH 0x00000008 /* enable + dynamic max + frame length + */ +#define REMODER_DYNAMIC_MIN_FRAME_LENGTH 0x00000004 /* enable + dynamic min + frame length + */ +#define REMODER_IP_CHECKSUM_CHECK 0x00000002 /* check IPv4 + checksums */ +#define REMODER_IP_ADDRESS_ALIGNMENT 0x00000001 /* align ip + address to + 4-byte + boundary */ + +/* UCC GETH Event Register */ +#define UCCE_MPD 0x80000000 /* Magic packet + detection */ +#define UCCE_SCAR 0x40000000 +#define UCCE_GRA 0x20000000 /* Tx graceful + stop + complete */ +#define UCCE_CBPR 0x10000000 +#define UCCE_BSY 0x08000000 +#define UCCE_RXC 0x04000000 +#define UCCE_TXC 0x02000000 +#define UCCE_TXE 0x01000000 +#define UCCE_TXB7 0x00800000 +#define UCCE_TXB6 0x00400000 +#define UCCE_TXB5 0x00200000 +#define UCCE_TXB4 0x00100000 +#define UCCE_TXB3 0x00080000 +#define UCCE_TXB2 0x00040000 +#define UCCE_TXB1 0x00020000 +#define UCCE_TXB0 0x00010000 +#define UCCE_RXB7 0x00008000 +#define UCCE_RXB6 0x00004000 +#define UCCE_RXB5 0x00002000 +#define UCCE_RXB4 0x00001000 +#define UCCE_RXB3 0x00000800 +#define UCCE_RXB2 0x00000400 +#define UCCE_RXB1 0x00000200 +#define UCCE_RXB0 0x00000100 +#define UCCE_RXF7 0x00000080 +#define UCCE_RXF6 0x00000040 +#define UCCE_RXF5 0x00000020 +#define UCCE_RXF4 0x00000010 +#define UCCE_RXF3 0x00000008 +#define UCCE_RXF2 0x00000004 +#define UCCE_RXF1 0x00000002 +#define UCCE_RXF0 0x00000001 + +#define UCCE_RXBF_SINGLE_MASK (UCCE_RXF0) +#define UCCE_TXBF_SINGLE_MASK (UCCE_TXB0) + +#define UCCE_TXB (UCCE_TXB7 | UCCE_TXB6 | UCCE_TXB5 | UCCE_TXB4 |\ + UCCE_TXB3 | UCCE_TXB2 | UCCE_TXB1 | UCCE_TXB0) +#define UCCE_RXB (UCCE_RXB7 | UCCE_RXB6 | UCCE_RXB5 | UCCE_RXB4 |\ + UCCE_RXB3 | UCCE_RXB2 | UCCE_RXB1 | UCCE_RXB0) +#define UCCE_RXF (UCCE_RXF7 | UCCE_RXF6 | UCCE_RXF5 | UCCE_RXF4 |\ + UCCE_RXF3 | UCCE_RXF2 | UCCE_RXF1 | UCCE_RXF0) +#define UCCE_OTHER (UCCE_SCAR | UCCE_GRA | UCCE_CBPR | UCCE_BSY |\ + UCCE_RXC | UCCE_TXC | UCCE_TXE) + +/* UCC GETH UPSMR (Protocol Specific Mode Register) */ +#define UPSMR_ECM 0x04000000 /* Enable CAM + Miss or + Enable + Filtering + Miss */ +#define UPSMR_HSE 0x02000000 /* Hardware + Statistics + Enable */ +#define UPSMR_PRO 0x00400000 /* Promiscuous*/ +#define UPSMR_CAP 0x00200000 /* CAM polarity + */ +#define UPSMR_RSH 0x00100000 /* Receive + Short Frames + */ +#define UPSMR_RPM 0x00080000 /* Reduced Pin + Mode + interfaces */ +#define UPSMR_R10M 0x00040000 /* RGMII/RMII + 10 Mode */ +#define UPSMR_RLPB 0x00020000 /* RMII + Loopback + Mode */ +#define UPSMR_TBIM 0x00010000 /* Ten-bit + Interface + Mode */ +#define UPSMR_RMM 0x00001000 /* RMII/RGMII + Mode */ +#define UPSMR_CAM 0x00000400 /* CAM Address + Matching */ +#define UPSMR_BRO 0x00000200 /* Broadcast + Address */ +#define UPSMR_RES1 0x00002000 /* Reserved + feild - must + be 1 */ + +/* UCC GETH MACCFG1 (MAC Configuration 1 Register) */ +#define MACCFG1_FLOW_RX 0x00000020 /* Flow Control + Rx */ +#define MACCFG1_FLOW_TX 0x00000010 /* Flow Control + Tx */ +#define MACCFG1_ENABLE_SYNCHED_RX 0x00000008 /* Rx Enable + synchronized + to Rx stream + */ +#define MACCFG1_ENABLE_RX 0x00000004 /* Enable Rx */ +#define MACCFG1_ENABLE_SYNCHED_TX 0x00000002 /* Tx Enable + synchronized + to Tx stream + */ +#define MACCFG1_ENABLE_TX 0x00000001 /* Enable Tx */ + +/* UCC GETH MACCFG2 (MAC Configuration 2 Register) */ +#define MACCFG2_PREL_SHIFT (31 - 19) /* Preamble + Length << + shift */ +#define MACCFG2_PREL_MASK 0x0000f000 /* Preamble + Length mask */ +#define MACCFG2_SRP 0x00000080 /* Soft Receive + Preamble */ +#define MACCFG2_STP 0x00000040 /* Soft + Transmit + Preamble */ +#define MACCFG2_RESERVED_1 0x00000020 /* Reserved - + must be set + to 1 */ +#define MACCFG2_LC 0x00000010 /* Length Check + */ +#define MACCFG2_MPE 0x00000008 /* Magic packet + detect */ +#define MACCFG2_FDX 0x00000001 /* Full Duplex */ +#define MACCFG2_FDX_MASK 0x00000001 /* Full Duplex + mask */ +#define MACCFG2_PAD_CRC 0x00000004 +#define MACCFG2_CRC_EN 0x00000002 +#define MACCFG2_PAD_AND_CRC_MODE_NONE 0x00000000 /* Neither + Padding + short frames + nor CRC */ +#define MACCFG2_PAD_AND_CRC_MODE_CRC_ONLY 0x00000002 /* Append CRC + only */ +#define MACCFG2_PAD_AND_CRC_MODE_PAD_AND_CRC 0x00000004 +#define MACCFG2_INTERFACE_MODE_NIBBLE 0x00000100 /* nibble mode + (MII/RMII/RGMII + 10/100bps) */ +#define MACCFG2_INTERFACE_MODE_BYTE 0x00000200 /* byte mode + (GMII/TBI/RTB/RGMII + 1000bps ) */ +#define MACCFG2_INTERFACE_MODE_MASK 0x00000300 /* mask + covering all + relevant + bits */ + +/* UCC GETH IPGIFG (Inter-frame Gap / Inter-Frame Gap Register) */ +#define IPGIFG_NON_BACK_TO_BACK_IFG_PART1_SHIFT (31 - 7) /* Non + back-to-back + inter frame + gap part 1. + << shift */ +#define IPGIFG_NON_BACK_TO_BACK_IFG_PART2_SHIFT (31 - 15) /* Non + back-to-back + inter frame + gap part 2. + << shift */ +#define IPGIFG_MINIMUM_IFG_ENFORCEMENT_SHIFT (31 - 23) /* Mimimum IFG + Enforcement + << shift */ +#define IPGIFG_BACK_TO_BACK_IFG_SHIFT (31 - 31) /* back-to-back + inter frame + gap << shift + */ +#define IPGIFG_NON_BACK_TO_BACK_IFG_PART1_MAX 127 /* Non back-to-back + inter frame gap part + 1. max val */ +#define IPGIFG_NON_BACK_TO_BACK_IFG_PART2_MAX 127 /* Non back-to-back + inter frame gap part + 2. max val */ +#define IPGIFG_MINIMUM_IFG_ENFORCEMENT_MAX 255 /* Mimimum IFG + Enforcement max val */ +#define IPGIFG_BACK_TO_BACK_IFG_MAX 127 /* back-to-back inter + frame gap max val */ +#define IPGIFG_NBTB_CS_IPG_MASK 0x7F000000 +#define IPGIFG_NBTB_IPG_MASK 0x007F0000 +#define IPGIFG_MIN_IFG_MASK 0x0000FF00 +#define IPGIFG_BTB_IPG_MASK 0x0000007F + +/* UCC GETH HAFDUP (Half Duplex Register) */ +#define HALFDUP_ALT_BEB_TRUNCATION_SHIFT (31 - 11) /* Alternate + Binary + Exponential + Backoff + Truncation + << shift */ +#define HALFDUP_ALT_BEB_TRUNCATION_MAX 0xf /* Alternate Binary + Exponential Backoff + Truncation max val */ +#define HALFDUP_ALT_BEB 0x00080000 /* Alternate + Binary + Exponential + Backoff */ +#define HALFDUP_BACK_PRESSURE_NO_BACKOFF 0x00040000 /* Back + pressure no + backoff */ +#define HALFDUP_NO_BACKOFF 0x00020000 /* No Backoff */ +#define HALFDUP_EXCESSIVE_DEFER 0x00010000 /* Excessive + Defer */ +#define HALFDUP_MAX_RETRANSMISSION_SHIFT (31 - 19) /* Maximum + Retransmission + << shift */ +#define HALFDUP_MAX_RETRANSMISSION_MAX 0xf /* Maximum + Retransmission max + val */ +#define HALFDUP_COLLISION_WINDOW_SHIFT (31 - 31) /* Collision + Window << + shift */ +#define HALFDUP_COLLISION_WINDOW_MAX 0x3f /* Collision Window max + val */ +#define HALFDUP_ALT_BEB_TR_MASK 0x00F00000 +#define HALFDUP_RETRANS_MASK 0x0000F000 +#define HALFDUP_COL_WINDOW_MASK 0x0000003F + +/* UCC GETH UCCS (Ethernet Status Register) */ +#define UCCS_BPR 0x02 /* Back pressure (in + half duplex mode) */ +#define UCCS_PAU 0x02 /* Pause state (in full + duplex mode) */ +#define UCCS_MPD 0x01 /* Magic Packet + Detected */ + +/* UCC GETH MIIMCFG (MII Management Configuration Register) */ +#define MIIMCFG_RESET_MANAGEMENT 0x80000000 /* Reset + management */ +#define MIIMCFG_NO_PREAMBLE 0x00000010 /* Preamble + suppress */ +#define MIIMCFG_CLOCK_DIVIDE_SHIFT (31 - 31) /* clock divide + << shift */ +#define MIIMCFG_CLOCK_DIVIDE_MAX 0xf /* clock divide max val + */ +#define MIIMCFG_MANAGEMENT_CLOCK_DIVIDE_BY_2 0x00000000 /* divide by 2 */ +#define MIIMCFG_MANAGEMENT_CLOCK_DIVIDE_BY_4 0x00000001 /* divide by 4 */ +#define MIIMCFG_MANAGEMENT_CLOCK_DIVIDE_BY_6 0x00000002 /* divide by 6 */ +#define MIIMCFG_MANAGEMENT_CLOCK_DIVIDE_BY_8 0x00000003 /* divide by 8 */ +#define MIIMCFG_MANAGEMENT_CLOCK_DIVIDE_BY_10 0x00000004 /* divide by 10 + */ +#define MIIMCFG_MANAGEMENT_CLOCK_DIVIDE_BY_14 0x00000005 /* divide by 14 + */ +#define MIIMCFG_MANAGEMENT_CLOCK_DIVIDE_BY_16 0x00000008 /* divide by 16 + */ +#define MIIMCFG_MANAGEMENT_CLOCK_DIVIDE_BY_20 0x00000006 /* divide by 20 + */ +#define MIIMCFG_MANAGEMENT_CLOCK_DIVIDE_BY_28 0x00000007 /* divide by 28 + */ +#define MIIMCFG_MANAGEMENT_CLOCK_DIVIDE_BY_32 0x00000009 /* divide by 32 + */ +#define MIIMCFG_MANAGEMENT_CLOCK_DIVIDE_BY_48 0x0000000a /* divide by 48 + */ +#define MIIMCFG_MANAGEMENT_CLOCK_DIVIDE_BY_64 0x0000000b /* divide by 64 + */ +#define MIIMCFG_MANAGEMENT_CLOCK_DIVIDE_BY_80 0x0000000c /* divide by 80 + */ +#define MIIMCFG_MANAGEMENT_CLOCK_DIVIDE_BY_112 0x0000000d /* divide by + 112 */ +#define MIIMCFG_MANAGEMENT_CLOCK_DIVIDE_BY_160 0x0000000e /* divide by + 160 */ +#define MIIMCFG_MANAGEMENT_CLOCK_DIVIDE_BY_224 0x0000000f /* divide by + 224 */ + +/* UCC GETH MIIMCOM (MII Management Command Register) */ +#define MIIMCOM_SCAN_CYCLE 0x00000002 /* Scan cycle */ +#define MIIMCOM_READ_CYCLE 0x00000001 /* Read cycle */ + +/* UCC GETH MIIMADD (MII Management Address Register) */ +#define MIIMADD_PHY_ADDRESS_SHIFT (31 - 23) /* PHY Address + << shift */ +#define MIIMADD_PHY_REGISTER_SHIFT (31 - 31) /* PHY Register + << shift */ + +/* UCC GETH MIIMCON (MII Management Control Register) */ +#define MIIMCON_PHY_CONTROL_SHIFT (31 - 31) /* PHY Control + << shift */ +#define MIIMCON_PHY_STATUS_SHIFT (31 - 31) /* PHY Status + << shift */ + +/* UCC GETH MIIMIND (MII Management Indicator Register) */ +#define MIIMIND_NOT_VALID 0x00000004 /* Not valid */ +#define MIIMIND_SCAN 0x00000002 /* Scan in + progress */ +#define MIIMIND_BUSY 0x00000001 + +/* UCC GETH IFSTAT (Interface Status Register) */ +#define IFSTAT_EXCESS_DEFER 0x00000200 /* Excessive + transmission + defer */ + +/* UCC GETH MACSTNADDR1 (Station Address Part 1 Register) */ +#define MACSTNADDR1_OCTET_6_SHIFT (31 - 7) /* Station + address 6th + octet << + shift */ +#define MACSTNADDR1_OCTET_5_SHIFT (31 - 15) /* Station + address 5th + octet << + shift */ +#define MACSTNADDR1_OCTET_4_SHIFT (31 - 23) /* Station + address 4th + octet << + shift */ +#define MACSTNADDR1_OCTET_3_SHIFT (31 - 31) /* Station + address 3rd + octet << + shift */ + +/* UCC GETH MACSTNADDR2 (Station Address Part 2 Register) */ +#define MACSTNADDR2_OCTET_2_SHIFT (31 - 7) /* Station + address 2nd + octet << + shift */ +#define MACSTNADDR2_OCTET_1_SHIFT (31 - 15) /* Station + address 1st + octet << + shift */ + +/* UCC GETH UEMPR (Ethernet Mac Parameter Register) */ +#define UEMPR_PAUSE_TIME_VALUE_SHIFT (31 - 15) /* Pause time + value << + shift */ +#define UEMPR_EXTENDED_PAUSE_TIME_VALUE_SHIFT (31 - 31) /* Extended + pause time + value << + shift */ + +/* UCC GETH UTBIPAR (Ten Bit Interface Physical Address Register) */ +#define UTBIPAR_PHY_ADDRESS_SHIFT (31 - 31) /* Phy address + << shift */ +#define UTBIPAR_PHY_ADDRESS_MASK 0x0000001f /* Phy address + mask */ + +/* UCC GETH UESCR (Ethernet Statistics Control Register) */ +#define UESCR_AUTOZ 0x8000 /* Automatically zero + addressed + statistical counter + values */ +#define UESCR_CLRCNT 0x4000 /* Clear all statistics + counters */ +#define UESCR_MAXCOV_SHIFT (15 - 7) /* Max + Coalescing + Value << + shift */ +#define UESCR_SCOV_SHIFT (15 - 15) /* Status + Coalescing + Value << + shift */ + +/* UCC GETH UDSR (Data Synchronization Register) */ +#define UDSR_MAGIC 0x067E + +typedef struct ucc_geth_thread_data_tx { + u8 res0[104]; +} __attribute__ ((packed)) ucc_geth_thread_data_tx_t; + +typedef struct ucc_geth_thread_data_rx { + u8 res0[40]; +} __attribute__ ((packed)) ucc_geth_thread_data_rx_t; + +/* Send Queue Queue-Descriptor */ +typedef struct ucc_geth_send_queue_qd { + u32 bd_ring_base; /* pointer to BD ring base address */ + u8 res0[0x8]; + u32 last_bd_completed_address;/* initialize to last entry in BD ring */ + u8 res1[0x30]; +} __attribute__ ((packed)) ucc_geth_send_queue_qd_t; + +typedef struct ucc_geth_send_queue_mem_region { + ucc_geth_send_queue_qd_t sqqd[NUM_TX_QUEUES]; +} __attribute__ ((packed)) ucc_geth_send_queue_mem_region_t; + +typedef struct ucc_geth_thread_tx_pram { + u8 res0[64]; +} __attribute__ ((packed)) ucc_geth_thread_tx_pram_t; + +typedef struct ucc_geth_thread_rx_pram { + u8 res0[128]; +} __attribute__ ((packed)) ucc_geth_thread_rx_pram_t; + +#define THREAD_RX_PRAM_ADDITIONAL_FOR_EXTENDED_FILTERING 64 +#define THREAD_RX_PRAM_ADDITIONAL_FOR_EXTENDED_FILTERING_8 64 +#define THREAD_RX_PRAM_ADDITIONAL_FOR_EXTENDED_FILTERING_16 96 + +typedef struct ucc_geth_scheduler { + u16 cpucount0; /* CPU packet counter */ + u16 cpucount1; /* CPU packet counter */ + u16 cecount0; /* QE packet counter */ + u16 cecount1; /* QE packet counter */ + u16 cpucount2; /* CPU packet counter */ + u16 cpucount3; /* CPU packet counter */ + u16 cecount2; /* QE packet counter */ + u16 cecount3; /* QE packet counter */ + u16 cpucount4; /* CPU packet counter */ + u16 cpucount5; /* CPU packet counter */ + u16 cecount4; /* QE packet counter */ + u16 cecount5; /* QE packet counter */ + u16 cpucount6; /* CPU packet counter */ + u16 cpucount7; /* CPU packet counter */ + u16 cecount6; /* QE packet counter */ + u16 cecount7; /* QE packet counter */ + u32 weightstatus[NUM_TX_QUEUES]; /* accumulated weight factor */ + u32 rtsrshadow; /* temporary variable handled by QE */ + u32 time; /* temporary variable handled by QE */ + u32 ttl; /* temporary variable handled by QE */ + u32 mblinterval; /* max burst length interval */ + u16 nortsrbytetime; /* normalized value of byte time in tsr units */ + u8 fracsiz; /* radix 2 log value of denom. of + NorTSRByteTime */ + u8 res0[1]; + u8 strictpriorityq; /* Strict Priority Mask register */ + u8 txasap; /* Transmit ASAP register */ + u8 extrabw; /* Extra BandWidth register */ + u8 oldwfqmask; /* temporary variable handled by QE */ + u8 weightfactor[NUM_TX_QUEUES]; + /**< weight factor for queues */ + u32 minw; /* temporary variable handled by QE */ + u8 res1[0x70 - 0x64]; +} __attribute__ ((packed)) ucc_geth_scheduler_t; + +typedef struct ucc_geth_tx_firmware_statistics_pram { + u32 sicoltx; /* single collision */ + u32 mulcoltx; /* multiple collision */ + u32 latecoltxfr; /* late collision */ + u32 frabortduecol; /* frames aborted due to transmit collision */ + u32 frlostinmactxer; /* frames lost due to internal MAC error + transmission that are not counted on any + other counter */ + u32 carriersenseertx; /* carrier sense error */ + u32 frtxok; /* frames transmitted OK */ + u32 txfrexcessivedefer; /* frames with defferal time greater than + specified threshold */ + u32 txpkts256; /* total packets (including bad) between 256 + and 511 octets */ + u32 txpkts512; /* total packets (including bad) between 512 + and 1023 octets */ + u32 txpkts1024; /* total packets (including bad) between 1024 + and 1518 octets */ + u32 txpktsjumbo; /* total packets (including bad) between 1024 + and MAXLength octets */ +} __attribute__ ((packed)) ucc_geth_tx_firmware_statistics_pram_t; + +typedef struct ucc_geth_rx_firmware_statistics_pram { + u32 frrxfcser; /* frames with crc error */ + u32 fraligner; /* frames with alignment error */ + u32 inrangelenrxer; /* in range length error */ + u32 outrangelenrxer; /* out of range length error */ + u32 frtoolong; /* frame too long */ + u32 runt; /* runt */ + u32 verylongevent; /* very long event */ + u32 symbolerror; /* symbol error */ + u32 dropbsy; /* drop because of BD not ready */ + u8 res0[0x8]; + u32 mismatchdrop; /* drop because of MAC filtering (e.g. address + or type mismatch) */ + u32 underpkts; /* total frames less than 64 octets */ + u32 pkts256; /* total frames (including bad) between 256 and + 511 octets */ + u32 pkts512; /* total frames (including bad) between 512 and + 1023 octets */ + u32 pkts1024; /* total frames (including bad) between 1024 + and 1518 octets */ + u32 pktsjumbo; /* total frames (including bad) between 1024 + and MAXLength octets */ + u32 frlossinmacer; /* frames lost because of internal MAC error + that is not counted in any other counter */ + u32 pausefr; /* pause frames */ + u8 res1[0x4]; + u32 removevlan; /* total frames that had their VLAN tag removed + */ + u32 replacevlan; /* total frames that had their VLAN tag + replaced */ + u32 insertvlan; /* total frames that had their VLAN tag + inserted */ +} __attribute__ ((packed)) ucc_geth_rx_firmware_statistics_pram_t; + +typedef struct ucc_geth_rx_interrupt_coalescing_entry { + u32 interruptcoalescingmaxvalue; /* interrupt coalescing max + value */ + u32 interruptcoalescingcounter; /* interrupt coalescing counter, + initialize to + interruptcoalescingmaxvalue */ +} __attribute__ ((packed)) ucc_geth_rx_interrupt_coalescing_entry_t; + +typedef struct ucc_geth_rx_interrupt_coalescing_table { + ucc_geth_rx_interrupt_coalescing_entry_t coalescingentry[NUM_RX_QUEUES]; + /**< interrupt coalescing entry */ +} __attribute__ ((packed)) ucc_geth_rx_interrupt_coalescing_table_t; + +typedef struct ucc_geth_rx_prefetched_bds { + qe_bd_t bd[NUM_BDS_IN_PREFETCHED_BDS]; /* prefetched bd */ +} __attribute__ ((packed)) ucc_geth_rx_prefetched_bds_t; + +typedef struct ucc_geth_rx_bd_queues_entry { + u32 bdbaseptr; /* BD base pointer */ + u32 bdptr; /* BD pointer */ + u32 externalbdbaseptr; /* external BD base pointer */ + u32 externalbdptr; /* external BD pointer */ +} __attribute__ ((packed)) ucc_geth_rx_bd_queues_entry_t; + +typedef struct ucc_geth_tx_global_pram { + u16 temoder; + u8 res0[0x38 - 0x02]; + u32 sqptr; /* a base pointer to send queue memory region */ + u32 schedulerbasepointer; /* a base pointer to scheduler memory + region */ + u32 txrmonbaseptr; /* base pointer to Tx RMON statistics counter */ + u32 tstate; /* tx internal state. High byte contains + function code */ + u8 iphoffset[TX_IP_OFFSET_ENTRY_MAX]; + u32 vtagtable[0x8]; /* 8 4-byte VLAN tags */ + u32 tqptr; /* a base pointer to the Tx Queues Memory + Region */ + u8 res2[0x80 - 0x74]; +} __attribute__ ((packed)) ucc_geth_tx_global_pram_t; + +/* structure representing Extended Filtering Global Parameters in PRAM */ +typedef struct ucc_geth_exf_global_pram { + u32 l2pcdptr; /* individual address filter, high */ + u8 res0[0x10 - 0x04]; +} __attribute__ ((packed)) ucc_geth_exf_global_pram_t; + +typedef struct ucc_geth_rx_global_pram { + u32 remoder; /* ethernet mode reg. */ + u32 rqptr; /* base pointer to the Rx Queues Memory Region*/ + u32 res0[0x1]; + u8 res1[0x20 - 0xC]; + u16 typeorlen; /* cutoff point less than which, type/len field + is considered length */ + u8 res2[0x1]; + u8 rxgstpack; /* acknowledgement on GRACEFUL STOP RX command*/ + u32 rxrmonbaseptr; /* base pointer to Rx RMON statistics counter */ + u8 res3[0x30 - 0x28]; + u32 intcoalescingptr; /* Interrupt coalescing table pointer */ + u8 res4[0x36 - 0x34]; + u8 rstate; /* rx internal state. High byte contains + function code */ + u8 res5[0x46 - 0x37]; + u16 mrblr; /* max receive buffer length reg. */ + u32 rbdqptr; /* base pointer to RxBD parameter table + description */ + u16 mflr; /* max frame length reg. */ + u16 minflr; /* min frame length reg. */ + u16 maxd1; /* max dma1 length reg. */ + u16 maxd2; /* max dma2 length reg. */ + u32 ecamptr; /* external CAM address */ + u32 l2qt; /* VLAN priority mapping table. */ + u32 l3qt[0x8]; /* IP priority mapping table. */ + u16 vlantype; /* vlan type */ + u16 vlantci; /* default vlan tci */ + u8 addressfiltering[64]; /* address filtering data structure */ + u32 exfGlobalParam; /* base address for extended filtering global + parameters */ + u8 res6[0x100 - 0xC4]; /* Initialize to zero */ +} __attribute__ ((packed)) ucc_geth_rx_global_pram_t; + +#define GRACEFUL_STOP_ACKNOWLEDGE_RX 0x01 + +/* structure representing InitEnet command */ +typedef struct ucc_geth_init_pram { + u8 resinit1; + u8 resinit2; + u8 resinit3; + u8 resinit4; + u16 resinit5; + u8 res1[0x1]; + u8 largestexternallookupkeysize; + u32 rgftgfrxglobal; + u32 rxthread[ENET_INIT_PARAM_MAX_ENTRIES_RX]; /* rx threads */ + u8 res2[0x38 - 0x30]; + u32 txglobal; /* tx global */ + u32 txthread[ENET_INIT_PARAM_MAX_ENTRIES_TX]; /* tx threads */ + u8 res3[0x1]; +} __attribute__ ((packed)) ucc_geth_init_pram_t; + +#define ENET_INIT_PARAM_RGF_SHIFT (32 - 4) +#define ENET_INIT_PARAM_TGF_SHIFT (32 - 8) + +#define ENET_INIT_PARAM_RISC_MASK 0x0000003f +#define ENET_INIT_PARAM_PTR_MASK 0x00ffffc0 +#define ENET_INIT_PARAM_SNUM_MASK 0xff000000 +#define ENET_INIT_PARAM_SNUM_SHIFT 24 + +#define ENET_INIT_PARAM_MAGIC_RES_INIT1 0x06 +#define ENET_INIT_PARAM_MAGIC_RES_INIT2 0x30 +#define ENET_INIT_PARAM_MAGIC_RES_INIT3 0xff +#define ENET_INIT_PARAM_MAGIC_RES_INIT4 0x00 +#define ENET_INIT_PARAM_MAGIC_RES_INIT5 0x0400 + +/* structure representing 82xx Address Filtering Enet Address in PRAM */ +typedef struct ucc_geth_82xx_enet_address { + u8 res1[0x2]; + u16 h; /* address (MSB) */ + u16 m; /* address */ + u16 l; /* address (LSB) */ +} __attribute__ ((packed)) ucc_geth_82xx_enet_address_t; + +/* structure representing 82xx Address Filtering PRAM */ +typedef struct ucc_geth_82xx_address_filtering_pram { + u32 iaddr_h; /* individual address filter, high */ + u32 iaddr_l; /* individual address filter, low */ + u32 gaddr_h; /* group address filter, high */ + u32 gaddr_l; /* group address filter, low */ + ucc_geth_82xx_enet_address_t taddr; + ucc_geth_82xx_enet_address_t paddr[NUM_OF_PADDRS]; + u8 res0[0x40 - 0x38]; +} __attribute__ ((packed)) ucc_geth_82xx_address_filtering_pram_t; + +/* GETH Tx firmware statistics structure, used when calling + UCC_GETH_GetStatistics. */ +typedef struct ucc_geth_tx_firmware_statistics { + u32 sicoltx; /* single collision */ + u32 mulcoltx; /* multiple collision */ + u32 latecoltxfr; /* late collision */ + u32 frabortduecol; /* frames aborted due to transmit collision */ + u32 frlostinmactxer; /* frames lost due to internal MAC error + transmission that are not counted on any + other counter */ + u32 carriersenseertx; /* carrier sense error */ + u32 frtxok; /* frames transmitted OK */ + u32 txfrexcessivedefer; /* frames with defferal time greater than + specified threshold */ + u32 txpkts256; /* total packets (including bad) between 256 + and 511 octets */ + u32 txpkts512; /* total packets (including bad) between 512 + and 1023 octets */ + u32 txpkts1024; /* total packets (including bad) between 1024 + and 1518 octets */ + u32 txpktsjumbo; /* total packets (including bad) between 1024 + and MAXLength octets */ +} __attribute__ ((packed)) ucc_geth_tx_firmware_statistics_t; + +/* GETH Rx firmware statistics structure, used when calling + UCC_GETH_GetStatistics. */ +typedef struct ucc_geth_rx_firmware_statistics { + u32 frrxfcser; /* frames with crc error */ + u32 fraligner; /* frames with alignment error */ + u32 inrangelenrxer; /* in range length error */ + u32 outrangelenrxer; /* out of range length error */ + u32 frtoolong; /* frame too long */ + u32 runt; /* runt */ + u32 verylongevent; /* very long event */ + u32 symbolerror; /* symbol error */ + u32 dropbsy; /* drop because of BD not ready */ + u8 res0[0x8]; + u32 mismatchdrop; /* drop because of MAC filtering (e.g. address + or type mismatch) */ + u32 underpkts; /* total frames less than 64 octets */ + u32 pkts256; /* total frames (including bad) between 256 and + 511 octets */ + u32 pkts512; /* total frames (including bad) between 512 and + 1023 octets */ + u32 pkts1024; /* total frames (including bad) between 1024 + and 1518 octets */ + u32 pktsjumbo; /* total frames (including bad) between 1024 + and MAXLength octets */ + u32 frlossinmacer; /* frames lost because of internal MAC error + that is not counted in any other counter */ + u32 pausefr; /* pause frames */ + u8 res1[0x4]; + u32 removevlan; /* total frames that had their VLAN tag removed + */ + u32 replacevlan; /* total frames that had their VLAN tag + replaced */ + u32 insertvlan; /* total frames that had their VLAN tag + inserted */ +} __attribute__ ((packed)) ucc_geth_rx_firmware_statistics_t; + +/* GETH hardware statistics structure, used when calling + UCC_GETH_GetStatistics. */ +typedef struct ucc_geth_hardware_statistics { + u32 tx64; /* Total number of frames (including bad + frames) transmitted that were exactly of the + minimal length (64 for un tagged, 68 for + tagged, or with length exactly equal to the + parameter MINLength */ + u32 tx127; /* Total number of frames (including bad + frames) transmitted that were between + MINLength (Including FCS length==4) and 127 + octets */ + u32 tx255; /* Total number of frames (including bad + frames) transmitted that were between 128 + (Including FCS length==4) and 255 octets */ + u32 rx64; /* Total number of frames received including + bad frames that were exactly of the mninimal + length (64 bytes) */ + u32 rx127; /* Total number of frames (including bad + frames) received that were between MINLength + (Including FCS length==4) and 127 octets */ + u32 rx255; /* Total number of frames (including bad + frames) received that were between 128 + (Including FCS length==4) and 255 octets */ + u32 txok; /* Total number of octets residing in frames + that where involved in succesfull + transmission */ + u16 txcf; /* Total number of PAUSE control frames + transmitted by this MAC */ + u32 tmca; /* Total number of frames that were transmitted + succesfully with the group address bit set + that are not broadcast frames */ + u32 tbca; /* Total number of frames transmitted + succesfully that had destination address + field equal to the broadcast address */ + u32 rxfok; /* Total number of frames received OK */ + u32 rxbok; /* Total number of octets received OK */ + u32 rbyt; /* Total number of octets received including + octets in bad frames. Must be implemented in + HW because it includes octets in frames that + never even reach the UCC */ + u32 rmca; /* Total number of frames that were received + succesfully with the group address bit set + that are not broadcast frames */ + u32 rbca; /* Total number of frames received succesfully + that had destination address equal to the + broadcast address */ +} __attribute__ ((packed)) ucc_geth_hardware_statistics_t; + +/* UCC GETH Tx errors returned via TxConf callback */ +#define TX_ERRORS_DEF 0x0200 +#define TX_ERRORS_EXDEF 0x0100 +#define TX_ERRORS_LC 0x0080 +#define TX_ERRORS_RL 0x0040 +#define TX_ERRORS_RC_MASK 0x003C +#define TX_ERRORS_RC_SHIFT 2 +#define TX_ERRORS_UN 0x0002 +#define TX_ERRORS_CSL 0x0001 + +/* UCC GETH Rx errors returned via RxStore callback */ +#define RX_ERRORS_CMR 0x0200 +#define RX_ERRORS_M 0x0100 +#define RX_ERRORS_BC 0x0080 +#define RX_ERRORS_MC 0x0040 + +/* Transmit BD. These are in addition to values defined in uccf. */ +#define T_VID 0x003c0000 /* insert VLAN id index mask. */ +#define T_DEF (((u32) TX_ERRORS_DEF ) << 16) +#define T_EXDEF (((u32) TX_ERRORS_EXDEF ) << 16) +#define T_LC (((u32) TX_ERRORS_LC ) << 16) +#define T_RL (((u32) TX_ERRORS_RL ) << 16) +#define T_RC_MASK (((u32) TX_ERRORS_RC_MASK ) << 16) +#define T_UN (((u32) TX_ERRORS_UN ) << 16) +#define T_CSL (((u32) TX_ERRORS_CSL ) << 16) +#define T_ERRORS_REPORT (T_DEF | T_EXDEF | T_LC | T_RL | T_RC_MASK \ + | T_UN | T_CSL) /* transmit errors to report */ + +/* Receive BD. These are in addition to values defined in uccf. */ +#define R_LG 0x00200000 /* Frame length violation. */ +#define R_NO 0x00100000 /* Non-octet aligned frame. */ +#define R_SH 0x00080000 /* Short frame. */ +#define R_CR 0x00040000 /* CRC error. */ +#define R_OV 0x00020000 /* Overrun. */ +#define R_IPCH 0x00010000 /* IP checksum check failed. */ +#define R_CMR (((u32) RX_ERRORS_CMR ) << 16) +#define R_M (((u32) RX_ERRORS_M ) << 16) +#define R_BC (((u32) RX_ERRORS_BC ) << 16) +#define R_MC (((u32) RX_ERRORS_MC ) << 16) +#define R_ERRORS_REPORT (R_CMR | R_M | R_BC | R_MC) /* receive errors to + report */ +#define R_ERRORS_FATAL (R_LG | R_NO | R_SH | R_CR | \ + R_OV | R_IPCH) /* receive errors to discard */ + +/* Alignments */ +#define UCC_GETH_RX_GLOBAL_PRAM_ALIGNMENT 256 +#define UCC_GETH_TX_GLOBAL_PRAM_ALIGNMENT 128 +#define UCC_GETH_THREAD_RX_PRAM_ALIGNMENT 128 +#define UCC_GETH_THREAD_TX_PRAM_ALIGNMENT 64 +#define UCC_GETH_THREAD_DATA_ALIGNMENT 256 /* spec gives values + based on num of + threads, but always + using the maximum is + easier */ +#define UCC_GETH_SEND_QUEUE_QUEUE_DESCRIPTOR_ALIGNMENT 32 +#define UCC_GETH_SCHEDULER_ALIGNMENT 4 /* This is a guess */ +#define UCC_GETH_TX_STATISTICS_ALIGNMENT 4 /* This is a guess */ +#define UCC_GETH_RX_STATISTICS_ALIGNMENT 4 /* This is a guess */ +#define UCC_GETH_RX_INTERRUPT_COALESCING_ALIGNMENT 4 /* This is a + guess */ +#define UCC_GETH_RX_BD_QUEUES_ALIGNMENT 8 /* This is a guess */ +#define UCC_GETH_RX_PREFETCHED_BDS_ALIGNMENT 128 /* This is a guess */ +#define UCC_GETH_RX_EXTENDED_FILTERING_GLOBAL_PARAMETERS_ALIGNMENT 4 /* This + is a + guess + */ +#define UCC_GETH_RX_BD_RING_ALIGNMENT 32 +#define UCC_GETH_TX_BD_RING_ALIGNMENT 32 +#define UCC_GETH_MRBLR_ALIGNMENT 128 +#define UCC_GETH_RX_BD_RING_SIZE_ALIGNMENT 4 +#define UCC_GETH_TX_BD_RING_SIZE_MEMORY_ALIGNMENT 32 +#define UCC_GETH_RX_DATA_BUF_ALIGNMENT 64 + +#define UCC_GETH_TAD_EF 0x80 +#define UCC_GETH_TAD_V 0x40 +#define UCC_GETH_TAD_REJ 0x20 +#define UCC_GETH_TAD_VTAG_OP_RIGHT_SHIFT 2 +#define UCC_GETH_TAD_VTAG_OP_SHIFT 6 +#define UCC_GETH_TAD_V_NON_VTAG_OP 0x20 +#define UCC_GETH_TAD_RQOS_SHIFT 0 +#define UCC_GETH_TAD_V_PRIORITY_SHIFT 5 +#define UCC_GETH_TAD_CFI 0x10 + +#define UCC_GETH_VLAN_PRIORITY_MAX 8 +#define UCC_GETH_IP_PRIORITY_MAX 64 +#define UCC_GETH_TX_VTAG_TABLE_ENTRY_MAX 8 +#define UCC_GETH_RX_BD_RING_SIZE_MIN 8 +#define UCC_GETH_TX_BD_RING_SIZE_MIN 2 + +#define UCC_GETH_SIZE_OF_BD QE_SIZEOF_BD + +/* Driver definitions */ +#define TX_BD_RING_LEN 0x10 +#define RX_BD_RING_LEN 0x10 +#define UCC_GETH_DEV_WEIGHT TX_BD_RING_LEN + +#define TX_RING_MOD_MASK(size) (size-1) +#define RX_RING_MOD_MASK(size) (size-1) + +#define ENET_NUM_OCTETS_PER_ADDRESS 6 +#define ENET_GROUP_ADDR 0x01 /* Group address mask + for ethernet + addresses */ + +#define TX_TIMEOUT (1*HZ) +#define SKB_ALLOC_TIMEOUT 100000 +#define PHY_INIT_TIMEOUT 100000 +#define PHY_CHANGE_TIME 2 + +/* Fast Ethernet (10/100 Mbps) */ +#define UCC_GETH_URFS_INIT 512 /* Rx virtual FIFO size + */ +#define UCC_GETH_URFET_INIT 256 /* 1/2 urfs */ +#define UCC_GETH_URFSET_INIT 384 /* 3/4 urfs */ +#define UCC_GETH_UTFS_INIT 512 /* Tx virtual FIFO size + */ +#define UCC_GETH_UTFET_INIT 256 /* 1/2 utfs */ +#define UCC_GETH_UTFTT_INIT 128 +/* Gigabit Ethernet (1000 Mbps) */ +#define UCC_GETH_URFS_GIGA_INIT 4096/*2048*/ /* Rx virtual + FIFO size */ +#define UCC_GETH_URFET_GIGA_INIT 2048/*1024*/ /* 1/2 urfs */ +#define UCC_GETH_URFSET_GIGA_INIT 3072/*1536*/ /* 3/4 urfs */ +#define UCC_GETH_UTFS_GIGA_INIT 8192/*2048*/ /* Tx virtual + FIFO size */ +#define UCC_GETH_UTFET_GIGA_INIT 4096/*1024*/ /* 1/2 utfs */ +#define UCC_GETH_UTFTT_GIGA_INIT 0x400/*0x40*/ /* */ + +#define UCC_GETH_REMODER_INIT 0 /* bits that must be + set */ +#define UCC_GETH_TEMODER_INIT 0xC000 /* bits that must */ +#define UCC_GETH_UPSMR_INIT (UPSMR_RES1) /* Start value + for this + register */ +#define UCC_GETH_MACCFG1_INIT 0 +#define UCC_GETH_MACCFG2_INIT (MACCFG2_RESERVED_1) +#define UCC_GETH_MIIMCFG_MNGMNT_CLC_DIV_INIT \ + (MIIMCFG_MANAGEMENT_CLOCK_DIVIDE_BY_112) + +/* Ethernet speed */ +typedef enum enet_speed { + ENET_SPEED_10BT, /* 10 Base T */ + ENET_SPEED_100BT, /* 100 Base T */ + ENET_SPEED_1000BT /* 1000 Base T */ +} enet_speed_e; + +/* Ethernet Address Type. */ +typedef enum enet_addr_type { + ENET_ADDR_TYPE_INDIVIDUAL, + ENET_ADDR_TYPE_GROUP, + ENET_ADDR_TYPE_BROADCAST +} enet_addr_type_e; + +/* TBI / MII Set Register */ +typedef enum enet_tbi_mii_reg { + ENET_TBI_MII_CR = 0x00, /* Control (CR ) */ + ENET_TBI_MII_SR = 0x01, /* Status (SR ) */ + ENET_TBI_MII_ANA = 0x04, /* AN advertisement (ANA ) */ + ENET_TBI_MII_ANLPBPA = 0x05, /* AN link partner base page ability + (ANLPBPA) */ + ENET_TBI_MII_ANEX = 0x06, /* AN expansion (ANEX ) */ + ENET_TBI_MII_ANNPT = 0x07, /* AN next page transmit (ANNPT ) */ + ENET_TBI_MII_ANLPANP = 0x08, /* AN link partner ability next page + (ANLPANP) */ + ENET_TBI_MII_EXST = 0x0F, /* Extended status (EXST ) */ + ENET_TBI_MII_JD = 0x10, /* Jitter diagnostics (JD ) */ + ENET_TBI_MII_TBICON = 0x11 /* TBI control (TBICON ) */ +} enet_tbi_mii_reg_e; + +/* UCC GETH 82xx Ethernet Address Recognition Location */ +typedef enum ucc_geth_enet_address_recognition_location { + UCC_GETH_ENET_ADDRESS_RECOGNITION_LOCATION_STATION_ADDRESS,/* station + address */ + UCC_GETH_ENET_ADDRESS_RECOGNITION_LOCATION_PADDR_FIRST, /* additional + station + address + paddr1 */ + UCC_GETH_ENET_ADDRESS_RECOGNITION_LOCATION_PADDR2, /* additional + station + address + paddr2 */ + UCC_GETH_ENET_ADDRESS_RECOGNITION_LOCATION_PADDR3, /* additional + station + address + paddr3 */ + UCC_GETH_ENET_ADDRESS_RECOGNITION_LOCATION_PADDR_LAST, /* additional + station + address + paddr4 */ + UCC_GETH_ENET_ADDRESS_RECOGNITION_LOCATION_GROUP_HASH, /* group hash */ + UCC_GETH_ENET_ADDRESS_RECOGNITION_LOCATION_INDIVIDUAL_HASH /* individual + hash */ +} ucc_geth_enet_address_recognition_location_e; + +/* UCC GETH vlan operation tagged */ +typedef enum ucc_geth_vlan_operation_tagged { + UCC_GETH_VLAN_OPERATION_TAGGED_NOP = 0x0, /* Tagged - nop */ + UCC_GETH_VLAN_OPERATION_TAGGED_REPLACE_VID_PORTION_OF_Q_TAG + = 0x1, /* Tagged - replace vid portion of q tag */ + UCC_GETH_VLAN_OPERATION_TAGGED_IF_VID0_REPLACE_VID_WITH_DEFAULT_VALUE + = 0x2, /* Tagged - if vid0 replace vid with default value */ + UCC_GETH_VLAN_OPERATION_TAGGED_EXTRACT_Q_TAG_FROM_FRAME + = 0x3 /* Tagged - extract q tag from frame */ +} ucc_geth_vlan_operation_tagged_e; + +/* UCC GETH vlan operation non-tagged */ +typedef enum ucc_geth_vlan_operation_non_tagged { + UCC_GETH_VLAN_OPERATION_NON_TAGGED_NOP = 0x0, /* Non tagged - nop */ + UCC_GETH_VLAN_OPERATION_NON_TAGGED_Q_TAG_INSERT = 0x1 /* Non tagged - + q tag insert + */ +} ucc_geth_vlan_operation_non_tagged_e; + +/* UCC GETH Rx Quality of Service Mode */ +typedef enum ucc_geth_qos_mode { + UCC_GETH_QOS_MODE_DEFAULT = 0x0, /* default queue */ + UCC_GETH_QOS_MODE_QUEUE_NUM_FROM_L2_CRITERIA = 0x1, /* queue + determined + by L2 + criteria */ + UCC_GETH_QOS_MODE_QUEUE_NUM_FROM_L3_CRITERIA = 0x2 /* queue + determined + by L3 + criteria */ +} ucc_geth_qos_mode_e; + +/* UCC GETH Statistics Gathering Mode - These are bit flags, 'or' them together + for combined functionality */ +typedef enum ucc_geth_statistics_gathering_mode { + UCC_GETH_STATISTICS_GATHERING_MODE_NONE = 0x00000000, /* No + statistics + gathering */ + UCC_GETH_STATISTICS_GATHERING_MODE_HARDWARE = 0x00000001,/* Enable + hardware + statistics + gathering + */ + UCC_GETH_STATISTICS_GATHERING_MODE_FIRMWARE_TX = 0x00000004,/*Enable + firmware + tx + statistics + gathering + */ + UCC_GETH_STATISTICS_GATHERING_MODE_FIRMWARE_RX = 0x00000008/* Enable + firmware + rx + statistics + gathering + */ +} ucc_geth_statistics_gathering_mode_e; + +/* UCC GETH Pad and CRC Mode - Note, Padding without CRC is not possible */ +typedef enum ucc_geth_maccfg2_pad_and_crc_mode { + UCC_GETH_PAD_AND_CRC_MODE_NONE + = MACCFG2_PAD_AND_CRC_MODE_NONE, /* Neither Padding + short frames + nor CRC */ + UCC_GETH_PAD_AND_CRC_MODE_CRC_ONLY + = MACCFG2_PAD_AND_CRC_MODE_CRC_ONLY, /* Append + CRC only */ + UCC_GETH_PAD_AND_CRC_MODE_PAD_AND_CRC = + MACCFG2_PAD_AND_CRC_MODE_PAD_AND_CRC +} ucc_geth_maccfg2_pad_and_crc_mode_e; + +/* UCC GETH upsmr Flow Control Mode */ +typedef enum ucc_geth_flow_control_mode { + UPSMR_AUTOMATIC_FLOW_CONTROL_MODE_NONE = 0x00000000, /* No automatic + flow control + */ + UPSMR_AUTOMATIC_FLOW_CONTROL_MODE_PAUSE_WHEN_EMERGENCY + = 0x00004000 /* Send pause frame when RxFIFO reaches its + emergency threshold */ +} ucc_geth_flow_control_mode_e; + +/* UCC GETH number of threads */ +typedef enum ucc_geth_num_of_threads { + UCC_GETH_NUM_OF_THREADS_1 = 0x1, /* 1 */ + UCC_GETH_NUM_OF_THREADS_2 = 0x2, /* 2 */ + UCC_GETH_NUM_OF_THREADS_4 = 0x0, /* 4 */ + UCC_GETH_NUM_OF_THREADS_6 = 0x3, /* 6 */ + UCC_GETH_NUM_OF_THREADS_8 = 0x4 /* 8 */ +} ucc_geth_num_of_threads_e; + +/* UCC GETH number of station addresses */ +typedef enum ucc_geth_num_of_station_addresses { + UCC_GETH_NUM_OF_STATION_ADDRESSES_1, /* 1 */ + UCC_GETH_NUM_OF_STATION_ADDRESSES_5 /* 5 */ +} ucc_geth_num_of_station_addresses_e; + +typedef u8 enet_addr_t[ENET_NUM_OCTETS_PER_ADDRESS]; + +/* UCC GETH 82xx Ethernet Address Container */ +typedef struct enet_addr_container { + enet_addr_t address; /* ethernet address */ + ucc_geth_enet_address_recognition_location_e location; /* location in + 82xx address + recognition + hardware */ + struct list_head node; +} enet_addr_container_t; + +#define ENET_ADDR_CONT_ENTRY(ptr) list_entry(ptr, enet_addr_container_t, node) + +/* UCC GETH Termination Action Descriptor (TAD) structure. */ +typedef struct ucc_geth_tad_params { + int rx_non_dynamic_extended_features_mode; + int reject_frame; + ucc_geth_vlan_operation_tagged_e vtag_op; + ucc_geth_vlan_operation_non_tagged_e vnontag_op; + ucc_geth_qos_mode_e rqos; + u8 vpri; + u16 vid; +} ucc_geth_tad_params_t; + +/* GETH protocol initialization structure */ +typedef struct ucc_geth_info { + ucc_fast_info_t uf_info; + u8 numQueuesTx; + u8 numQueuesRx; + int ipCheckSumCheck; + int ipCheckSumGenerate; + int rxExtendedFiltering; + u32 extendedFilteringChainPointer; + u16 typeorlen; + int dynamicMaxFrameLength; + int dynamicMinFrameLength; + u8 nonBackToBackIfgPart1; + u8 nonBackToBackIfgPart2; + u8 miminumInterFrameGapEnforcement; + u8 backToBackInterFrameGap; + int ipAddressAlignment; + int lengthCheckRx; + u32 mblinterval; + u16 nortsrbytetime; + u8 fracsiz; + u8 strictpriorityq; + u8 txasap; + u8 extrabw; + int miiPreambleSupress; + u8 altBebTruncation; + int altBeb; + int backPressureNoBackoff; + int noBackoff; + int excessDefer; + u8 maxRetransmission; + u8 collisionWindow; + int pro; + int cap; + int rsh; + int rlpb; + int cam; + int bro; + int ecm; + int receiveFlowControl; + u8 maxGroupAddrInHash; + u8 maxIndAddrInHash; + u8 prel; + u16 maxFrameLength; + u16 minFrameLength; + u16 maxD1Length; + u16 maxD2Length; + u16 vlantype; + u16 vlantci; + u32 ecamptr; + u32 eventRegMask; + u16 pausePeriod; + u16 extensionField; + u8 phy_address; + u32 board_flags; + u32 phy_interrupt; + u8 weightfactor[NUM_TX_QUEUES]; + u8 interruptcoalescingmaxvalue[NUM_RX_QUEUES]; + u8 l2qt[UCC_GETH_VLAN_PRIORITY_MAX]; + u8 l3qt[UCC_GETH_IP_PRIORITY_MAX]; + u32 vtagtable[UCC_GETH_TX_VTAG_TABLE_ENTRY_MAX]; + u8 iphoffset[TX_IP_OFFSET_ENTRY_MAX]; + u16 bdRingLenTx[NUM_TX_QUEUES]; + u16 bdRingLenRx[NUM_RX_QUEUES]; + enet_interface_e enet_interface; + ucc_geth_num_of_station_addresses_e numStationAddresses; + qe_fltr_largest_external_tbl_lookup_key_size_e + largestexternallookupkeysize; + ucc_geth_statistics_gathering_mode_e statisticsMode; + ucc_geth_vlan_operation_tagged_e vlanOperationTagged; + ucc_geth_vlan_operation_non_tagged_e vlanOperationNonTagged; + ucc_geth_qos_mode_e rxQoSMode; + ucc_geth_flow_control_mode_e aufc; + ucc_geth_maccfg2_pad_and_crc_mode_e padAndCrc; + ucc_geth_num_of_threads_e numThreadsTx; + ucc_geth_num_of_threads_e numThreadsRx; + qe_risc_allocation_e riscTx; + qe_risc_allocation_e riscRx; +} ucc_geth_info_t; + +/* structure representing UCC GETH */ +typedef struct ucc_geth_private { + ucc_geth_info_t *ug_info; + ucc_fast_private_t *uccf; + struct net_device *dev; + struct net_device_stats stats; /* linux network statistics */ + ucc_geth_t *ug_regs; + ucc_geth_init_pram_t *p_init_enet_param_shadow; + ucc_geth_exf_global_pram_t *p_exf_glbl_param; + u32 exf_glbl_param_offset; + ucc_geth_rx_global_pram_t *p_rx_glbl_pram; + u32 rx_glbl_pram_offset; + ucc_geth_tx_global_pram_t *p_tx_glbl_pram; + u32 tx_glbl_pram_offset; + ucc_geth_send_queue_mem_region_t *p_send_q_mem_reg; + u32 send_q_mem_reg_offset; + ucc_geth_thread_data_tx_t *p_thread_data_tx; + u32 thread_dat_tx_offset; + ucc_geth_thread_data_rx_t *p_thread_data_rx; + u32 thread_dat_rx_offset; + ucc_geth_scheduler_t *p_scheduler; + u32 scheduler_offset; + ucc_geth_tx_firmware_statistics_pram_t *p_tx_fw_statistics_pram; + u32 tx_fw_statistics_pram_offset; + ucc_geth_rx_firmware_statistics_pram_t *p_rx_fw_statistics_pram; + u32 rx_fw_statistics_pram_offset; + ucc_geth_rx_interrupt_coalescing_table_t *p_rx_irq_coalescing_tbl; + u32 rx_irq_coalescing_tbl_offset; + ucc_geth_rx_bd_queues_entry_t *p_rx_bd_qs_tbl; + u32 rx_bd_qs_tbl_offset; + u8 *p_tx_bd_ring[NUM_TX_QUEUES]; + u32 tx_bd_ring_offset[NUM_TX_QUEUES]; + u8 *p_rx_bd_ring[NUM_RX_QUEUES]; + u32 rx_bd_ring_offset[NUM_RX_QUEUES]; + u8 *confBd[NUM_TX_QUEUES]; + u8 *txBd[NUM_TX_QUEUES]; + u8 *rxBd[NUM_RX_QUEUES]; + int badFrame[NUM_RX_QUEUES]; + u16 cpucount[NUM_TX_QUEUES]; + volatile u16 *p_cpucount[NUM_TX_QUEUES]; + int indAddrRegUsed[NUM_OF_PADDRS]; + enet_addr_t paddr[NUM_OF_PADDRS]; + u8 numGroupAddrInHash; + u8 numIndAddrInHash; + u8 numIndAddrInReg; + int rx_extended_features; + int rx_non_dynamic_extended_features; + struct list_head conf_skbs; + struct list_head group_hash_q; + struct list_head ind_hash_q; + u32 saved_uccm; + spinlock_t lock; + /* pointers to arrays of skbuffs for tx and rx */ + struct sk_buff **tx_skbuff[NUM_TX_QUEUES]; + struct sk_buff **rx_skbuff[NUM_RX_QUEUES]; + /* indices pointing to the next free sbk in skb arrays */ + u16 skb_curtx[NUM_TX_QUEUES]; + u16 skb_currx[NUM_RX_QUEUES]; + /* index of the first skb which hasn't been transmitted yet. */ + u16 skb_dirtytx[NUM_TX_QUEUES]; + + struct work_struct tq; + struct timer_list phy_info_timer; + struct ugeth_mii_info *mii_info; + int oldspeed; + int oldduplex; + int oldlink; +} ucc_geth_private_t; + +#endif /* __UCC_GETH_H__ */ diff --git a/drivers/net/ucc_geth_phy.c b/drivers/net/ucc_geth_phy.c new file mode 100644 index 00000000000..f91028c5386 --- /dev/null +++ b/drivers/net/ucc_geth_phy.c @@ -0,0 +1,801 @@ +/* + * Copyright (C) Freescale Semicondutor, Inc. 2006. All rights reserved. + * + * Author: Shlomi Gridish + * + * Description: + * UCC GETH Driver -- PHY handling + * + * Changelog: + * Jun 28, 2006 Li Yang + * - Rearrange code and style fixes + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include + +#include "ucc_geth.h" +#include "ucc_geth_phy.h" +#include + +#define ugphy_printk(level, format, arg...) \ + printk(level format "\n", ## arg) + +#define ugphy_dbg(format, arg...) \ + ugphy_printk(KERN_DEBUG, format , ## arg) +#define ugphy_err(format, arg...) \ + ugphy_printk(KERN_ERR, format , ## arg) +#define ugphy_info(format, arg...) \ + ugphy_printk(KERN_INFO, format , ## arg) +#define ugphy_warn(format, arg...) \ + ugphy_printk(KERN_WARNING, format , ## arg) + +#ifdef UGETH_VERBOSE_DEBUG +#define ugphy_vdbg ugphy_dbg +#else +#define ugphy_vdbg(fmt, args...) do { } while (0) +#endif /* UGETH_VERBOSE_DEBUG */ + +static void config_genmii_advert(struct ugeth_mii_info *mii_info); +static void genmii_setup_forced(struct ugeth_mii_info *mii_info); +static void genmii_restart_aneg(struct ugeth_mii_info *mii_info); +static int gbit_config_aneg(struct ugeth_mii_info *mii_info); +static int genmii_config_aneg(struct ugeth_mii_info *mii_info); +static int genmii_update_link(struct ugeth_mii_info *mii_info); +static int genmii_read_status(struct ugeth_mii_info *mii_info); +u16 phy_read(struct ugeth_mii_info *mii_info, u16 regnum); +void phy_write(struct ugeth_mii_info *mii_info, u16 regnum, u16 val); + +static u8 *bcsr_regs = NULL; + +/* Write value to the PHY for this device to the register at regnum, */ +/* waiting until the write is done before it returns. All PHY */ +/* configuration has to be done through the TSEC1 MIIM regs */ +void write_phy_reg(struct net_device *dev, int mii_id, int regnum, int value) +{ + ucc_geth_private_t *ugeth = netdev_priv(dev); + ucc_mii_mng_t *mii_regs; + enet_tbi_mii_reg_e mii_reg = (enet_tbi_mii_reg_e) regnum; + u32 tmp_reg; + + ugphy_vdbg("%s: IN", __FUNCTION__); + + spin_lock_irq(&ugeth->lock); + + mii_regs = ugeth->mii_info->mii_regs; + + /* Set this UCC to be the master of the MII managment */ + ucc_set_qe_mux_mii_mng(ugeth->ug_info->uf_info.ucc_num); + + /* Stop the MII management read cycle */ + out_be32(&mii_regs->miimcom, 0); + /* Setting up the MII Mangement Address Register */ + tmp_reg = ((u32) mii_id << MIIMADD_PHY_ADDRESS_SHIFT) | mii_reg; + out_be32(&mii_regs->miimadd, tmp_reg); + + /* Setting up the MII Mangement Control Register with the value */ + out_be32(&mii_regs->miimcon, (u32) value); + + /* Wait till MII management write is complete */ + while ((in_be32(&mii_regs->miimind)) & MIIMIND_BUSY) + cpu_relax(); + + spin_unlock_irq(&ugeth->lock); + + udelay(10000); +} + +/* Reads from register regnum in the PHY for device dev, */ +/* returning the value. Clears miimcom first. All PHY */ +/* configuration has to be done through the TSEC1 MIIM regs */ +int read_phy_reg(struct net_device *dev, int mii_id, int regnum) +{ + ucc_geth_private_t *ugeth = netdev_priv(dev); + ucc_mii_mng_t *mii_regs; + enet_tbi_mii_reg_e mii_reg = (enet_tbi_mii_reg_e) regnum; + u32 tmp_reg; + u16 value; + + ugphy_vdbg("%s: IN", __FUNCTION__); + + spin_lock_irq(&ugeth->lock); + + mii_regs = ugeth->mii_info->mii_regs; + + /* Setting up the MII Mangement Address Register */ + tmp_reg = ((u32) mii_id << MIIMADD_PHY_ADDRESS_SHIFT) | mii_reg; + out_be32(&mii_regs->miimadd, tmp_reg); + + /* Perform an MII management read cycle */ + out_be32(&mii_regs->miimcom, MIIMCOM_READ_CYCLE); + + /* Wait till MII management write is complete */ + while ((in_be32(&mii_regs->miimind)) & MIIMIND_BUSY) + cpu_relax(); + + udelay(10000); + + /* Read MII management status */ + value = (u16) in_be32(&mii_regs->miimstat); + out_be32(&mii_regs->miimcom, 0); + if (value == 0xffff) + ugphy_warn("read wrong value : mii_id %d,mii_reg %d, base %08x", + mii_id, mii_reg, (u32) & (mii_regs->miimcfg)); + + spin_unlock_irq(&ugeth->lock); + + return (value); +} + +void mii_clear_phy_interrupt(struct ugeth_mii_info *mii_info) +{ + ugphy_vdbg("%s: IN", __FUNCTION__); + + if (mii_info->phyinfo->ack_interrupt) + mii_info->phyinfo->ack_interrupt(mii_info); +} + +void mii_configure_phy_interrupt(struct ugeth_mii_info *mii_info, + u32 interrupts) +{ + ugphy_vdbg("%s: IN", __FUNCTION__); + + mii_info->interrupts = interrupts; + if (mii_info->phyinfo->config_intr) + mii_info->phyinfo->config_intr(mii_info); +} + +/* Writes MII_ADVERTISE with the appropriate values, after + * sanitizing advertise to make sure only supported features + * are advertised + */ +static void config_genmii_advert(struct ugeth_mii_info *mii_info) +{ + u32 advertise; + u16 adv; + + ugphy_vdbg("%s: IN", __FUNCTION__); + + /* Only allow advertising what this PHY supports */ + mii_info->advertising &= mii_info->phyinfo->features; + advertise = mii_info->advertising; + + /* Setup standard advertisement */ + adv = phy_read(mii_info, MII_ADVERTISE); + adv &= ~(ADVERTISE_ALL | ADVERTISE_100BASE4); + if (advertise & ADVERTISED_10baseT_Half) + adv |= ADVERTISE_10HALF; + if (advertise & ADVERTISED_10baseT_Full) + adv |= ADVERTISE_10FULL; + if (advertise & ADVERTISED_100baseT_Half) + adv |= ADVERTISE_100HALF; + if (advertise & ADVERTISED_100baseT_Full) + adv |= ADVERTISE_100FULL; + phy_write(mii_info, MII_ADVERTISE, adv); +} + +static void genmii_setup_forced(struct ugeth_mii_info *mii_info) +{ + u16 ctrl; + u32 features = mii_info->phyinfo->features; + + ugphy_vdbg("%s: IN", __FUNCTION__); + + ctrl = phy_read(mii_info, MII_BMCR); + + ctrl &= + ~(BMCR_FULLDPLX | BMCR_SPEED100 | BMCR_SPEED1000 | BMCR_ANENABLE); + ctrl |= BMCR_RESET; + + switch (mii_info->speed) { + case SPEED_1000: + if (features & (SUPPORTED_1000baseT_Half + | SUPPORTED_1000baseT_Full)) { + ctrl |= BMCR_SPEED1000; + break; + } + mii_info->speed = SPEED_100; + case SPEED_100: + if (features & (SUPPORTED_100baseT_Half + | SUPPORTED_100baseT_Full)) { + ctrl |= BMCR_SPEED100; + break; + } + mii_info->speed = SPEED_10; + case SPEED_10: + if (features & (SUPPORTED_10baseT_Half + | SUPPORTED_10baseT_Full)) + break; + default: /* Unsupported speed! */ + ugphy_err("%s: Bad speed!", mii_info->dev->name); + break; + } + + phy_write(mii_info, MII_BMCR, ctrl); +} + +/* Enable and Restart Autonegotiation */ +static void genmii_restart_aneg(struct ugeth_mii_info *mii_info) +{ + u16 ctl; + + ugphy_vdbg("%s: IN", __FUNCTION__); + + ctl = phy_read(mii_info, MII_BMCR); + ctl |= (BMCR_ANENABLE | BMCR_ANRESTART); + phy_write(mii_info, MII_BMCR, ctl); +} + +static int gbit_config_aneg(struct ugeth_mii_info *mii_info) +{ + u16 adv; + u32 advertise; + + ugphy_vdbg("%s: IN", __FUNCTION__); + + if (mii_info->autoneg) { + /* Configure the ADVERTISE register */ + config_genmii_advert(mii_info); + advertise = mii_info->advertising; + + adv = phy_read(mii_info, MII_1000BASETCONTROL); + adv &= ~(MII_1000BASETCONTROL_FULLDUPLEXCAP | + MII_1000BASETCONTROL_HALFDUPLEXCAP); + if (advertise & SUPPORTED_1000baseT_Half) + adv |= MII_1000BASETCONTROL_HALFDUPLEXCAP; + if (advertise & SUPPORTED_1000baseT_Full) + adv |= MII_1000BASETCONTROL_FULLDUPLEXCAP; + phy_write(mii_info, MII_1000BASETCONTROL, adv); + + /* Start/Restart aneg */ + genmii_restart_aneg(mii_info); + } else + genmii_setup_forced(mii_info); + + return 0; +} + +static int genmii_config_aneg(struct ugeth_mii_info *mii_info) +{ + ugphy_vdbg("%s: IN", __FUNCTION__); + + if (mii_info->autoneg) { + config_genmii_advert(mii_info); + genmii_restart_aneg(mii_info); + } else + genmii_setup_forced(mii_info); + + return 0; +} + +static int genmii_update_link(struct ugeth_mii_info *mii_info) +{ + u16 status; + + ugphy_vdbg("%s: IN", __FUNCTION__); + + /* Do a fake read */ + phy_read(mii_info, MII_BMSR); + + /* Read link and autonegotiation status */ + status = phy_read(mii_info, MII_BMSR); + if ((status & BMSR_LSTATUS) == 0) + mii_info->link = 0; + else + mii_info->link = 1; + + /* If we are autonegotiating, and not done, + * return an error */ + if (mii_info->autoneg && !(status & BMSR_ANEGCOMPLETE)) + return -EAGAIN; + + return 0; +} + +static int genmii_read_status(struct ugeth_mii_info *mii_info) +{ + u16 status; + int err; + + ugphy_vdbg("%s: IN", __FUNCTION__); + + /* Update the link, but return if there + * was an error */ + err = genmii_update_link(mii_info); + if (err) + return err; + + if (mii_info->autoneg) { + status = phy_read(mii_info, MII_LPA); + + if (status & (LPA_10FULL | LPA_100FULL)) + mii_info->duplex = DUPLEX_FULL; + else + mii_info->duplex = DUPLEX_HALF; + if (status & (LPA_100FULL | LPA_100HALF)) + mii_info->speed = SPEED_100; + else + mii_info->speed = SPEED_10; + mii_info->pause = 0; + } + /* On non-aneg, we assume what we put in BMCR is the speed, + * though magic-aneg shouldn't prevent this case from occurring + */ + + return 0; +} + +static int marvell_init(struct ugeth_mii_info *mii_info) +{ + ugphy_vdbg("%s: IN", __FUNCTION__); + + phy_write(mii_info, 0x14, 0x0cd2); + phy_write(mii_info, MII_BMCR, + phy_read(mii_info, MII_BMCR) | BMCR_RESET); + msleep(4000); + + return 0; +} + +static int marvell_config_aneg(struct ugeth_mii_info *mii_info) +{ + ugphy_vdbg("%s: IN", __FUNCTION__); + + /* The Marvell PHY has an errata which requires + * that certain registers get written in order + * to restart autonegotiation */ + phy_write(mii_info, MII_BMCR, BMCR_RESET); + + phy_write(mii_info, 0x1d, 0x1f); + phy_write(mii_info, 0x1e, 0x200c); + phy_write(mii_info, 0x1d, 0x5); + phy_write(mii_info, 0x1e, 0); + phy_write(mii_info, 0x1e, 0x100); + + gbit_config_aneg(mii_info); + + return 0; +} + +static int marvell_read_status(struct ugeth_mii_info *mii_info) +{ + u16 status; + int err; + + ugphy_vdbg("%s: IN", __FUNCTION__); + + /* Update the link, but return if there + * was an error */ + err = genmii_update_link(mii_info); + if (err) + return err; + + /* If the link is up, read the speed and duplex */ + /* If we aren't autonegotiating, assume speeds + * are as set */ + if (mii_info->autoneg && mii_info->link) { + int speed; + status = phy_read(mii_info, MII_M1011_PHY_SPEC_STATUS); + + /* Get the duplexity */ + if (status & MII_M1011_PHY_SPEC_STATUS_FULLDUPLEX) + mii_info->duplex = DUPLEX_FULL; + else + mii_info->duplex = DUPLEX_HALF; + + /* Get the speed */ + speed = status & MII_M1011_PHY_SPEC_STATUS_SPD_MASK; + switch (speed) { + case MII_M1011_PHY_SPEC_STATUS_1000: + mii_info->speed = SPEED_1000; + break; + case MII_M1011_PHY_SPEC_STATUS_100: + mii_info->speed = SPEED_100; + break; + default: + mii_info->speed = SPEED_10; + break; + } + mii_info->pause = 0; + } + + return 0; +} + +static int marvell_ack_interrupt(struct ugeth_mii_info *mii_info) +{ + ugphy_vdbg("%s: IN", __FUNCTION__); + + /* Clear the interrupts by reading the reg */ + phy_read(mii_info, MII_M1011_IEVENT); + + return 0; +} + +static int marvell_config_intr(struct ugeth_mii_info *mii_info) +{ + ugphy_vdbg("%s: IN", __FUNCTION__); + + if (mii_info->interrupts == MII_INTERRUPT_ENABLED) + phy_write(mii_info, MII_M1011_IMASK, MII_M1011_IMASK_INIT); + else + phy_write(mii_info, MII_M1011_IMASK, MII_M1011_IMASK_CLEAR); + + return 0; +} + +static int cis820x_init(struct ugeth_mii_info *mii_info) +{ + ugphy_vdbg("%s: IN", __FUNCTION__); + + phy_write(mii_info, MII_CIS8201_AUX_CONSTAT, + MII_CIS8201_AUXCONSTAT_INIT); + phy_write(mii_info, MII_CIS8201_EXT_CON1, MII_CIS8201_EXTCON1_INIT); + + return 0; +} + +static int cis820x_read_status(struct ugeth_mii_info *mii_info) +{ + u16 status; + int err; + + ugphy_vdbg("%s: IN", __FUNCTION__); + + /* Update the link, but return if there + * was an error */ + err = genmii_update_link(mii_info); + if (err) + return err; + + /* If the link is up, read the speed and duplex */ + /* If we aren't autonegotiating, assume speeds + * are as set */ + if (mii_info->autoneg && mii_info->link) { + int speed; + + status = phy_read(mii_info, MII_CIS8201_AUX_CONSTAT); + if (status & MII_CIS8201_AUXCONSTAT_DUPLEX) + mii_info->duplex = DUPLEX_FULL; + else + mii_info->duplex = DUPLEX_HALF; + + speed = status & MII_CIS8201_AUXCONSTAT_SPEED; + + switch (speed) { + case MII_CIS8201_AUXCONSTAT_GBIT: + mii_info->speed = SPEED_1000; + break; + case MII_CIS8201_AUXCONSTAT_100: + mii_info->speed = SPEED_100; + break; + default: + mii_info->speed = SPEED_10; + break; + } + } + + return 0; +} + +static int cis820x_ack_interrupt(struct ugeth_mii_info *mii_info) +{ + ugphy_vdbg("%s: IN", __FUNCTION__); + + phy_read(mii_info, MII_CIS8201_ISTAT); + + return 0; +} + +static int cis820x_config_intr(struct ugeth_mii_info *mii_info) +{ + ugphy_vdbg("%s: IN", __FUNCTION__); + + if (mii_info->interrupts == MII_INTERRUPT_ENABLED) + phy_write(mii_info, MII_CIS8201_IMASK, MII_CIS8201_IMASK_MASK); + else + phy_write(mii_info, MII_CIS8201_IMASK, 0); + + return 0; +} + +#define DM9161_DELAY 10 + +static int dm9161_read_status(struct ugeth_mii_info *mii_info) +{ + u16 status; + int err; + + ugphy_vdbg("%s: IN", __FUNCTION__); + + /* Update the link, but return if there + * was an error */ + err = genmii_update_link(mii_info); + if (err) + return err; + + /* If the link is up, read the speed and duplex */ + /* If we aren't autonegotiating, assume speeds + * are as set */ + if (mii_info->autoneg && mii_info->link) { + status = phy_read(mii_info, MII_DM9161_SCSR); + if (status & (MII_DM9161_SCSR_100F | MII_DM9161_SCSR_100H)) + mii_info->speed = SPEED_100; + else + mii_info->speed = SPEED_10; + + if (status & (MII_DM9161_SCSR_100F | MII_DM9161_SCSR_10F)) + mii_info->duplex = DUPLEX_FULL; + else + mii_info->duplex = DUPLEX_HALF; + } + + return 0; +} + +static int dm9161_config_aneg(struct ugeth_mii_info *mii_info) +{ + struct dm9161_private *priv = mii_info->priv; + + ugphy_vdbg("%s: IN", __FUNCTION__); + + if (0 == priv->resetdone) + return -EAGAIN; + + return 0; +} + +static void dm9161_timer(unsigned long data) +{ + struct ugeth_mii_info *mii_info = (struct ugeth_mii_info *)data; + struct dm9161_private *priv = mii_info->priv; + u16 status = phy_read(mii_info, MII_BMSR); + + ugphy_vdbg("%s: IN", __FUNCTION__); + + if (status & BMSR_ANEGCOMPLETE) { + priv->resetdone = 1; + } else + mod_timer(&priv->timer, jiffies + DM9161_DELAY * HZ); +} + +static int dm9161_init(struct ugeth_mii_info *mii_info) +{ + struct dm9161_private *priv; + + ugphy_vdbg("%s: IN", __FUNCTION__); + + /* Allocate the private data structure */ + priv = kmalloc(sizeof(struct dm9161_private), GFP_KERNEL); + + if (NULL == priv) + return -ENOMEM; + + mii_info->priv = priv; + + /* Reset is not done yet */ + priv->resetdone = 0; + + phy_write(mii_info, MII_BMCR, + phy_read(mii_info, MII_BMCR) | BMCR_RESET); + + phy_write(mii_info, MII_BMCR, + phy_read(mii_info, MII_BMCR) & ~BMCR_ISOLATE); + + config_genmii_advert(mii_info); + /* Start/Restart aneg */ + genmii_config_aneg(mii_info); + + /* Start a timer for DM9161_DELAY seconds to wait + * for the PHY to be ready */ + init_timer(&priv->timer); + priv->timer.function = &dm9161_timer; + priv->timer.data = (unsigned long)mii_info; + mod_timer(&priv->timer, jiffies + DM9161_DELAY * HZ); + + return 0; +} + +static void dm9161_close(struct ugeth_mii_info *mii_info) +{ + struct dm9161_private *priv = mii_info->priv; + + ugphy_vdbg("%s: IN", __FUNCTION__); + + del_timer_sync(&priv->timer); + kfree(priv); +} + +static int dm9161_ack_interrupt(struct ugeth_mii_info *mii_info) +{ +/* FIXME: This lines are for BUG fixing in the mpc8325. +Remove this from here when it's fixed */ + if (bcsr_regs == NULL) + bcsr_regs = (u8 *) ioremap(BCSR_PHYS_ADDR, BCSR_SIZE); + bcsr_regs[14] |= 0x40; + ugphy_vdbg("%s: IN", __FUNCTION__); + + /* Clear the interrupts by reading the reg */ + phy_read(mii_info, MII_DM9161_INTR); + + + return 0; +} + +static int dm9161_config_intr(struct ugeth_mii_info *mii_info) +{ +/* FIXME: This lines are for BUG fixing in the mpc8325. +Remove this from here when it's fixed */ + if (bcsr_regs == NULL) { + bcsr_regs = (u8 *) ioremap(BCSR_PHYS_ADDR, BCSR_SIZE); + bcsr_regs[14] &= ~0x40; + } + ugphy_vdbg("%s: IN", __FUNCTION__); + + if (mii_info->interrupts == MII_INTERRUPT_ENABLED) + phy_write(mii_info, MII_DM9161_INTR, MII_DM9161_INTR_INIT); + else + phy_write(mii_info, MII_DM9161_INTR, MII_DM9161_INTR_STOP); + + return 0; +} + +/* Cicada 820x */ +static struct phy_info phy_info_cis820x = { + .phy_id = 0x000fc440, + .name = "Cicada Cis8204", + .phy_id_mask = 0x000fffc0, + .features = MII_GBIT_FEATURES, + .init = &cis820x_init, + .config_aneg = &gbit_config_aneg, + .read_status = &cis820x_read_status, + .ack_interrupt = &cis820x_ack_interrupt, + .config_intr = &cis820x_config_intr, +}; + +static struct phy_info phy_info_dm9161 = { + .phy_id = 0x0181b880, + .phy_id_mask = 0x0ffffff0, + .name = "Davicom DM9161E", + .init = dm9161_init, + .config_aneg = dm9161_config_aneg, + .read_status = dm9161_read_status, + .close = dm9161_close, +}; + +static struct phy_info phy_info_dm9161a = { + .phy_id = 0x0181b8a0, + .phy_id_mask = 0x0ffffff0, + .name = "Davicom DM9161A", + .features = MII_BASIC_FEATURES, + .init = dm9161_init, + .config_aneg = dm9161_config_aneg, + .read_status = dm9161_read_status, + .ack_interrupt = dm9161_ack_interrupt, + .config_intr = dm9161_config_intr, + .close = dm9161_close, +}; + +static struct phy_info phy_info_marvell = { + .phy_id = 0x01410c00, + .phy_id_mask = 0xffffff00, + .name = "Marvell 88E11x1", + .features = MII_GBIT_FEATURES, + .init = &marvell_init, + .config_aneg = &marvell_config_aneg, + .read_status = &marvell_read_status, + .ack_interrupt = &marvell_ack_interrupt, + .config_intr = &marvell_config_intr, +}; + +static struct phy_info phy_info_genmii = { + .phy_id = 0x00000000, + .phy_id_mask = 0x00000000, + .name = "Generic MII", + .features = MII_BASIC_FEATURES, + .config_aneg = genmii_config_aneg, + .read_status = genmii_read_status, +}; + +static struct phy_info *phy_info[] = { + &phy_info_cis820x, + &phy_info_marvell, + &phy_info_dm9161, + &phy_info_dm9161a, + &phy_info_genmii, + NULL +}; + +u16 phy_read(struct ugeth_mii_info *mii_info, u16 regnum) +{ + u16 retval; + unsigned long flags; + + ugphy_vdbg("%s: IN", __FUNCTION__); + + spin_lock_irqsave(&mii_info->mdio_lock, flags); + retval = mii_info->mdio_read(mii_info->dev, mii_info->mii_id, regnum); + spin_unlock_irqrestore(&mii_info->mdio_lock, flags); + + return retval; +} + +void phy_write(struct ugeth_mii_info *mii_info, u16 regnum, u16 val) +{ + unsigned long flags; + + ugphy_vdbg("%s: IN", __FUNCTION__); + + spin_lock_irqsave(&mii_info->mdio_lock, flags); + mii_info->mdio_write(mii_info->dev, mii_info->mii_id, regnum, val); + spin_unlock_irqrestore(&mii_info->mdio_lock, flags); +} + +/* Use the PHY ID registers to determine what type of PHY is attached + * to device dev. return a struct phy_info structure describing that PHY + */ +struct phy_info *get_phy_info(struct ugeth_mii_info *mii_info) +{ + u16 phy_reg; + u32 phy_ID; + int i; + struct phy_info *theInfo = NULL; + struct net_device *dev = mii_info->dev; + + ugphy_vdbg("%s: IN", __FUNCTION__); + + /* Grab the bits from PHYIR1, and put them in the upper half */ + phy_reg = phy_read(mii_info, MII_PHYSID1); + phy_ID = (phy_reg & 0xffff) << 16; + + /* Grab the bits from PHYIR2, and put them in the lower half */ + phy_reg = phy_read(mii_info, MII_PHYSID2); + phy_ID |= (phy_reg & 0xffff); + + /* loop through all the known PHY types, and find one that */ + /* matches the ID we read from the PHY. */ + for (i = 0; phy_info[i]; i++) + if (phy_info[i]->phy_id == (phy_ID & phy_info[i]->phy_id_mask)){ + theInfo = phy_info[i]; + break; + } + + /* This shouldn't happen, as we have generic PHY support */ + if (theInfo == NULL) { + ugphy_info("%s: PHY id %x is not supported!", dev->name, + phy_ID); + return NULL; + } else { + ugphy_info("%s: PHY is %s (%x)", dev->name, theInfo->name, + phy_ID); + } + + return theInfo; +} diff --git a/drivers/net/ucc_geth_phy.h b/drivers/net/ucc_geth_phy.h new file mode 100644 index 00000000000..2f98b8f1bb0 --- /dev/null +++ b/drivers/net/ucc_geth_phy.h @@ -0,0 +1,217 @@ +/* + * Copyright (C) Freescale Semicondutor, Inc. 2006. All rights reserved. + * + * Author: Shlomi Gridish + * + * Description: + * UCC GETH Driver -- PHY handling + * + * Changelog: + * Jun 28, 2006 Li Yang + * - Rearrange code and style fixes + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + */ +#ifndef __UCC_GETH_PHY_H__ +#define __UCC_GETH_PHY_H__ + +#define MII_end ((u32)-2) +#define MII_read ((u32)-1) + +#define MIIMIND_BUSY 0x00000001 +#define MIIMIND_NOTVALID 0x00000004 + +#define UGETH_AN_TIMEOUT 2000 + +/* 1000BT control (Marvell & BCM54xx at least) */ +#define MII_1000BASETCONTROL 0x09 +#define MII_1000BASETCONTROL_FULLDUPLEXCAP 0x0200 +#define MII_1000BASETCONTROL_HALFDUPLEXCAP 0x0100 + +/* Cicada Extended Control Register 1 */ +#define MII_CIS8201_EXT_CON1 0x17 +#define MII_CIS8201_EXTCON1_INIT 0x0000 + +/* Cicada Interrupt Mask Register */ +#define MII_CIS8201_IMASK 0x19 +#define MII_CIS8201_IMASK_IEN 0x8000 +#define MII_CIS8201_IMASK_SPEED 0x4000 +#define MII_CIS8201_IMASK_LINK 0x2000 +#define MII_CIS8201_IMASK_DUPLEX 0x1000 +#define MII_CIS8201_IMASK_MASK 0xf000 + +/* Cicada Interrupt Status Register */ +#define MII_CIS8201_ISTAT 0x1a +#define MII_CIS8201_ISTAT_STATUS 0x8000 +#define MII_CIS8201_ISTAT_SPEED 0x4000 +#define MII_CIS8201_ISTAT_LINK 0x2000 +#define MII_CIS8201_ISTAT_DUPLEX 0x1000 + +/* Cicada Auxiliary Control/Status Register */ +#define MII_CIS8201_AUX_CONSTAT 0x1c +#define MII_CIS8201_AUXCONSTAT_INIT 0x0004 +#define MII_CIS8201_AUXCONSTAT_DUPLEX 0x0020 +#define MII_CIS8201_AUXCONSTAT_SPEED 0x0018 +#define MII_CIS8201_AUXCONSTAT_GBIT 0x0010 +#define MII_CIS8201_AUXCONSTAT_100 0x0008 + +/* 88E1011 PHY Status Register */ +#define MII_M1011_PHY_SPEC_STATUS 0x11 +#define MII_M1011_PHY_SPEC_STATUS_1000 0x8000 +#define MII_M1011_PHY_SPEC_STATUS_100 0x4000 +#define MII_M1011_PHY_SPEC_STATUS_SPD_MASK 0xc000 +#define MII_M1011_PHY_SPEC_STATUS_FULLDUPLEX 0x2000 +#define MII_M1011_PHY_SPEC_STATUS_RESOLVED 0x0800 +#define MII_M1011_PHY_SPEC_STATUS_LINK 0x0400 + +#define MII_M1011_IEVENT 0x13 +#define MII_M1011_IEVENT_CLEAR 0x0000 + +#define MII_M1011_IMASK 0x12 +#define MII_M1011_IMASK_INIT 0x6400 +#define MII_M1011_IMASK_CLEAR 0x0000 + +#define MII_DM9161_SCR 0x10 +#define MII_DM9161_SCR_INIT 0x0610 + +/* DM9161 Specified Configuration and Status Register */ +#define MII_DM9161_SCSR 0x11 +#define MII_DM9161_SCSR_100F 0x8000 +#define MII_DM9161_SCSR_100H 0x4000 +#define MII_DM9161_SCSR_10F 0x2000 +#define MII_DM9161_SCSR_10H 0x1000 + +/* DM9161 Interrupt Register */ +#define MII_DM9161_INTR 0x15 +#define MII_DM9161_INTR_PEND 0x8000 +#define MII_DM9161_INTR_DPLX_MASK 0x0800 +#define MII_DM9161_INTR_SPD_MASK 0x0400 +#define MII_DM9161_INTR_LINK_MASK 0x0200 +#define MII_DM9161_INTR_MASK 0x0100 +#define MII_DM9161_INTR_DPLX_CHANGE 0x0010 +#define MII_DM9161_INTR_SPD_CHANGE 0x0008 +#define MII_DM9161_INTR_LINK_CHANGE 0x0004 +#define MII_DM9161_INTR_INIT 0x0000 +#define MII_DM9161_INTR_STOP \ +(MII_DM9161_INTR_DPLX_MASK | MII_DM9161_INTR_SPD_MASK \ + | MII_DM9161_INTR_LINK_MASK | MII_DM9161_INTR_MASK) + +/* DM9161 10BT Configuration/Status */ +#define MII_DM9161_10BTCSR 0x12 +#define MII_DM9161_10BTCSR_INIT 0x7800 + +#define MII_BASIC_FEATURES (SUPPORTED_10baseT_Half | \ + SUPPORTED_10baseT_Full | \ + SUPPORTED_100baseT_Half | \ + SUPPORTED_100baseT_Full | \ + SUPPORTED_Autoneg | \ + SUPPORTED_TP | \ + SUPPORTED_MII) + +#define MII_GBIT_FEATURES (MII_BASIC_FEATURES | \ + SUPPORTED_1000baseT_Half | \ + SUPPORTED_1000baseT_Full) + +#define MII_READ_COMMAND 0x00000001 + +#define MII_INTERRUPT_DISABLED 0x0 +#define MII_INTERRUPT_ENABLED 0x1 +/* Taken from mii_if_info and sungem_phy.h */ +struct ugeth_mii_info { + /* Information about the PHY type */ + /* And management functions */ + struct phy_info *phyinfo; + + ucc_mii_mng_t *mii_regs; + + /* forced speed & duplex (no autoneg) + * partner speed & duplex & pause (autoneg) + */ + int speed; + int duplex; + int pause; + + /* The most recently read link state */ + int link; + + /* Enabled Interrupts */ + u32 interrupts; + + u32 advertising; + int autoneg; + int mii_id; + + /* private data pointer */ + /* For use by PHYs to maintain extra state */ + void *priv; + + /* Provided by host chip */ + struct net_device *dev; + + /* A lock to ensure that only one thing can read/write + * the MDIO bus at a time */ + spinlock_t mdio_lock; + + /* Provided by ethernet driver */ + int (*mdio_read) (struct net_device * dev, int mii_id, int reg); + void (*mdio_write) (struct net_device * dev, int mii_id, int reg, + int val); +}; + +/* struct phy_info: a structure which defines attributes for a PHY + * + * id will contain a number which represents the PHY. During + * startup, the driver will poll the PHY to find out what its + * UID--as defined by registers 2 and 3--is. The 32-bit result + * gotten from the PHY will be ANDed with phy_id_mask to + * discard any bits which may change based on revision numbers + * unimportant to functionality + * + * There are 6 commands which take a ugeth_mii_info structure. + * Each PHY must declare config_aneg, and read_status. + */ +struct phy_info { + u32 phy_id; + char *name; + unsigned int phy_id_mask; + u32 features; + + /* Called to initialize the PHY */ + int (*init) (struct ugeth_mii_info * mii_info); + + /* Called to suspend the PHY for power */ + int (*suspend) (struct ugeth_mii_info * mii_info); + + /* Reconfigures autonegotiation (or disables it) */ + int (*config_aneg) (struct ugeth_mii_info * mii_info); + + /* Determines the negotiated speed and duplex */ + int (*read_status) (struct ugeth_mii_info * mii_info); + + /* Clears any pending interrupts */ + int (*ack_interrupt) (struct ugeth_mii_info * mii_info); + + /* Enables or disables interrupts */ + int (*config_intr) (struct ugeth_mii_info * mii_info); + + /* Clears up any memory if needed */ + void (*close) (struct ugeth_mii_info * mii_info); +}; + +struct phy_info *get_phy_info(struct ugeth_mii_info *mii_info); +void write_phy_reg(struct net_device *dev, int mii_id, int regnum, int value); +int read_phy_reg(struct net_device *dev, int mii_id, int regnum); +void mii_clear_phy_interrupt(struct ugeth_mii_info *mii_info); +void mii_configure_phy_interrupt(struct ugeth_mii_info *mii_info, + u32 interrupts); + +struct dm9161_private { + struct timer_list timer; + int resetdone; +}; + +#endif /* __UCC_GETH_PHY_H__ */ -- cgit v1.2.3-70-g09d2 From 6fd7587bc284af61f92e547287aa5cd616a9c7ba Mon Sep 17 00:00:00 2001 From: Deepak Saxena Date: Mon, 14 Aug 2006 23:00:13 -0700 Subject: [PATCH] Update smc91x driver with ARM Versatile board info We need to specify a Versatile-specific SMC_IRQ_FLAGS value or the new generic IRQ layer will complain thusly: No IRQF_TRIGGER set_type function for IRQ 25 () Signed-off-by: Deepak Saxena Cc: Jeff Garzik Cc: Russell King Cc: Nicolas Pitre Signed-off-by: Andrew Morton Signed-off-by: Jeff Garzik --- drivers/net/smc91x.h | 18 ++++++++++++++++++ 1 file changed, 18 insertions(+) (limited to 'drivers/net') diff --git a/drivers/net/smc91x.h b/drivers/net/smc91x.h index 9f9f8f2d533..95ac2ddca43 100644 --- a/drivers/net/smc91x.h +++ b/drivers/net/smc91x.h @@ -367,6 +367,24 @@ static inline void LPD7_SMC_outsw (unsigned char* a, int r, #define SMC_IRQ_FLAGS (0) +#elif defined(CONFIG_ARCH_VERSATILE) + +#define SMC_CAN_USE_8BIT 1 +#define SMC_CAN_USE_16BIT 1 +#define SMC_CAN_USE_32BIT 1 +#define SMC_NOWAIT 1 + +#define SMC_inb(a, r) readb((a) + (r)) +#define SMC_inw(a, r) readw((a) + (r)) +#define SMC_inl(a, r) readl((a) + (r)) +#define SMC_outb(v, a, r) writeb(v, (a) + (r)) +#define SMC_outw(v, a, r) writew(v, (a) + (r)) +#define SMC_outl(v, a, r) writel(v, (a) + (r)) +#define SMC_insl(a, r, p, l) readsl((a) + (r), p, l) +#define SMC_outsl(a, r, p, l) writesl((a) + (r), p, l) + +#define SMC_IRQ_FLAGS (0) + #else #define SMC_CAN_USE_8BIT 1 -- cgit v1.2.3-70-g09d2 From 330ce0de93fd7cc0f72fa57a7ec892befe7035d2 Mon Sep 17 00:00:00 2001 From: Andrew Morton Date: Mon, 14 Aug 2006 23:00:14 -0700 Subject: [PATCH] s2io build fix sparc32: drivers/net/s2io.c:2636: warning: implicit declaration of function 'disable_irq' drivers/net/s2io.c:2656: warning: implicit declaration of function 'enable_irq' Cc: Ananda Raju Cc: Jeff Garzik Signed-off-by: Andrew Morton Signed-off-by: Jeff Garzik --- drivers/net/s2io.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers/net') diff --git a/drivers/net/s2io.c b/drivers/net/s2io.c index 132ed32bce1..e72e0e09906 100644 --- a/drivers/net/s2io.c +++ b/drivers/net/s2io.c @@ -71,6 +71,7 @@ #include #include #include +#include /* local include */ #include "s2io.h" -- cgit v1.2.3-70-g09d2 From 2fd0e33f4f967022ef2f3249b6c512b309734384 Mon Sep 17 00:00:00 2001 From: Kevin Hao Date: Mon, 14 Aug 2006 23:00:15 -0700 Subject: [PATCH] net: Add netconsole support to dm9000 driver Add netconsole support to dm9000 driver. Cc: Jeff Garzik Cc: Sascha Hauer Cc: Ben Dooks Signed-off-by: Andrew Morton Signed-off-by: Jeff Garzik --- drivers/net/dm9000.c | 14 ++++++++++++++ 1 file changed, 14 insertions(+) (limited to 'drivers/net') diff --git a/drivers/net/dm9000.c b/drivers/net/dm9000.c index 1b758b70713..3d76fa144c4 100644 --- a/drivers/net/dm9000.c +++ b/drivers/net/dm9000.c @@ -339,6 +339,17 @@ static void dm9000_timeout(struct net_device *dev) spin_unlock_irqrestore(&db->lock,flags); } +#ifdef CONFIG_NET_POLL_CONTROLLER +/* + *Used by netconsole + */ +static void dm9000_poll_controller(struct net_device *dev) +{ + disable_irq(dev->irq); + dm9000_interrupt(dev->irq,dev,NULL); + enable_irq(dev->irq); +} +#endif /* dm9000_release_board * @@ -538,6 +549,9 @@ dm9000_probe(struct platform_device *pdev) ndev->stop = &dm9000_stop; ndev->get_stats = &dm9000_get_stats; ndev->set_multicast_list = &dm9000_hash_table; +#ifdef CONFIG_NET_POLL_CONTROLLER + ndev->poll_controller = &dm9000_poll_controller; +#endif #ifdef DM9000_PROGRAM_EEPROM program_eeprom(db); -- cgit v1.2.3-70-g09d2 From a4d09272480e57cd4aa1156cac7aba9b08885bf9 Mon Sep 17 00:00:00 2001 From: Peter Korsgaard Date: Mon, 14 Aug 2006 23:00:17 -0700 Subject: [PATCH] smc911x: Re-release spinlock on spurious interrupt The smc911x driver forgets to release the spinlock on spurious interrupts. This little patch fixes it. Cc: Jeff Garzik Signed-off-by: Peter Korsgaard Signed-off-by: Andrew Morton Signed-off-by: Jeff Garzik --- drivers/net/smc911x.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers/net') diff --git a/drivers/net/smc911x.c b/drivers/net/smc911x.c index d37bd860b33..0b15290df27 100644 --- a/drivers/net/smc911x.c +++ b/drivers/net/smc911x.c @@ -1092,6 +1092,7 @@ static irqreturn_t smc911x_interrupt(int irq, void *dev_id, struct pt_regs *regs /* Spurious interrupt check */ if ((SMC_GET_IRQ_CFG() & (INT_CFG_IRQ_INT_ | INT_CFG_IRQ_EN_)) != (INT_CFG_IRQ_INT_ | INT_CFG_IRQ_EN_)) { + spin_unlock_irqrestore(&lp->lock, flags); return IRQ_NONE; } -- cgit v1.2.3-70-g09d2 From 633949a145df19d6d338b0f227f033a0a1c5562a Mon Sep 17 00:00:00 2001 From: Roger Luethi Date: Mon, 14 Aug 2006 23:00:17 -0700 Subject: [PATCH] via-rhine: NAPI support Add NAPI support to the via-rhine driver so that it can handle higher speeds and doesn't get overloaded by interrupts as easily. Signed-off-by: Stephen Hemminger Signed-off-by: Roger Luethi Signed-off-by: Andrew Morton Signed-off-by: Jeff Garzik --- drivers/net/Kconfig | 14 +++++++++ drivers/net/via-rhine.c | 77 +++++++++++++++++++++++++++++++++++++++++-------- 2 files changed, 79 insertions(+), 12 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig index ea1796e767b..30b3671d833 100644 --- a/drivers/net/Kconfig +++ b/drivers/net/Kconfig @@ -1724,6 +1724,20 @@ config VIA_RHINE_MMIO If unsure, say Y. +config VIA_RHINE_NAPI + bool "Use Rx Polling (NAPI)" + depends on VIA_RHINE + help + NAPI is a new driver API designed to reduce CPU and interrupt load + when the driver is receiving lots of packets from the card. + + If your estimated Rx load is 10kpps or more, or if the card will be + deployed on potentially unfriendly networks (e.g. in a firewall), + then say Y here. + + See for more + information. + config LAN_SAA9730 bool "Philips SAA9730 Ethernet support (EXPERIMENTAL)" depends on NET_PCI && EXPERIMENTAL && MIPS diff --git a/drivers/net/via-rhine.c b/drivers/net/via-rhine.c index d3d0ec97031..fee824002d1 100644 --- a/drivers/net/via-rhine.c +++ b/drivers/net/via-rhine.c @@ -30,8 +30,8 @@ */ #define DRV_NAME "via-rhine" -#define DRV_VERSION "1.4.0" -#define DRV_RELDATE "June-27-2006" +#define DRV_VERSION "1.4.1" +#define DRV_RELDATE "July-24-2006" /* A few user-configurable values. @@ -63,7 +63,11 @@ static const int multicast_filter_limit = 32; There are no ill effects from too-large receive rings. */ #define TX_RING_SIZE 16 #define TX_QUEUE_LEN 10 /* Limit ring entries actually used. */ +#ifdef CONFIG_VIA_RHINE_NAPI +#define RX_RING_SIZE 64 +#else #define RX_RING_SIZE 16 +#endif /* Operational parameters that usually are not changed. */ @@ -396,7 +400,7 @@ static void rhine_tx_timeout(struct net_device *dev); static int rhine_start_tx(struct sk_buff *skb, struct net_device *dev); static irqreturn_t rhine_interrupt(int irq, void *dev_instance, struct pt_regs *regs); static void rhine_tx(struct net_device *dev); -static void rhine_rx(struct net_device *dev); +static int rhine_rx(struct net_device *dev, int limit); static void rhine_error(struct net_device *dev, int intr_status); static void rhine_set_rx_mode(struct net_device *dev); static struct net_device_stats *rhine_get_stats(struct net_device *dev); @@ -564,6 +568,32 @@ static void rhine_poll(struct net_device *dev) } #endif +#ifdef CONFIG_VIA_RHINE_NAPI +static int rhine_napipoll(struct net_device *dev, int *budget) +{ + struct rhine_private *rp = netdev_priv(dev); + void __iomem *ioaddr = rp->base; + int done, limit = min(dev->quota, *budget); + + done = rhine_rx(dev, limit); + *budget -= done; + dev->quota -= done; + + if (done < limit) { + netif_rx_complete(dev); + + iowrite16(IntrRxDone | IntrRxErr | IntrRxEmpty| IntrRxOverflow | + IntrRxDropped | IntrRxNoBuf | IntrTxAborted | + IntrTxDone | IntrTxError | IntrTxUnderrun | + IntrPCIErr | IntrStatsMax | IntrLinkChange, + ioaddr + IntrEnable); + return 0; + } + else + return 1; +} +#endif + static void rhine_hw_init(struct net_device *dev, long pioaddr) { struct rhine_private *rp = netdev_priv(dev); @@ -743,6 +773,10 @@ static int __devinit rhine_init_one(struct pci_dev *pdev, dev->watchdog_timeo = TX_TIMEOUT; #ifdef CONFIG_NET_POLL_CONTROLLER dev->poll_controller = rhine_poll; +#endif +#ifdef CONFIG_VIA_RHINE_NAPI + dev->poll = rhine_napipoll; + dev->weight = 64; #endif if (rp->quirks & rqRhineI) dev->features |= NETIF_F_SG|NETIF_F_HW_CSUM; @@ -1165,6 +1199,7 @@ static void rhine_tx_timeout(struct net_device *dev) dev->trans_start = jiffies; rp->stats.tx_errors++; netif_wake_queue(dev); + netif_poll_enable(dev); } static int rhine_start_tx(struct sk_buff *skb, struct net_device *dev) @@ -1268,8 +1303,18 @@ static irqreturn_t rhine_interrupt(int irq, void *dev_instance, struct pt_regs * dev->name, intr_status); if (intr_status & (IntrRxDone | IntrRxErr | IntrRxDropped | - IntrRxWakeUp | IntrRxEmpty | IntrRxNoBuf)) - rhine_rx(dev); + IntrRxWakeUp | IntrRxEmpty | IntrRxNoBuf)) { +#ifdef CONFIG_VIA_RHINE_NAPI + iowrite16(IntrTxAborted | + IntrTxDone | IntrTxError | IntrTxUnderrun | + IntrPCIErr | IntrStatsMax | IntrLinkChange, + ioaddr + IntrEnable); + + netif_rx_schedule(dev); +#else + rhine_rx(dev, RX_RING_SIZE); +#endif + } if (intr_status & (IntrTxErrSummary | IntrTxDone)) { if (intr_status & IntrTxErrSummary) { @@ -1367,13 +1412,12 @@ static void rhine_tx(struct net_device *dev) spin_unlock(&rp->lock); } -/* This routine is logically part of the interrupt handler, but isolated - for clarity and better register allocation. */ -static void rhine_rx(struct net_device *dev) +/* Process up to limit frames from receive ring */ +static int rhine_rx(struct net_device *dev, int limit) { struct rhine_private *rp = netdev_priv(dev); + int count; int entry = rp->cur_rx % RX_RING_SIZE; - int boguscnt = rp->dirty_rx + RX_RING_SIZE - rp->cur_rx; if (debug > 4) { printk(KERN_DEBUG "%s: rhine_rx(), entry %d status %8.8x.\n", @@ -1382,16 +1426,18 @@ static void rhine_rx(struct net_device *dev) } /* If EOP is set on the next entry, it's a new packet. Send it up. */ - while (!(rp->rx_head_desc->rx_status & cpu_to_le32(DescOwn))) { + for (count = 0; count < limit; ++count) { struct rx_desc *desc = rp->rx_head_desc; u32 desc_status = le32_to_cpu(desc->rx_status); int data_size = desc_status >> 16; + if (desc_status & DescOwn) + break; + if (debug > 4) printk(KERN_DEBUG "rhine_rx() status is %8.8x.\n", desc_status); - if (--boguscnt < 0) - break; + if ((desc_status & (RxWholePkt | RxErr)) != RxWholePkt) { if ((desc_status & RxWholePkt) != RxWholePkt) { printk(KERN_WARNING "%s: Oversized Ethernet " @@ -1460,7 +1506,11 @@ static void rhine_rx(struct net_device *dev) PCI_DMA_FROMDEVICE); } skb->protocol = eth_type_trans(skb, dev); +#ifdef CONFIG_VIA_RHINE_NAPI + netif_receive_skb(skb); +#else netif_rx(skb); +#endif dev->last_rx = jiffies; rp->stats.rx_bytes += pkt_len; rp->stats.rx_packets++; @@ -1487,6 +1537,8 @@ static void rhine_rx(struct net_device *dev) } rp->rx_ring[entry].rx_status = cpu_to_le32(DescOwn); } + + return count; } /* @@ -1776,6 +1828,7 @@ static int rhine_close(struct net_device *dev) spin_lock_irq(&rp->lock); netif_stop_queue(dev); + netif_poll_disable(dev); if (debug > 1) printk(KERN_DEBUG "%s: Shutting down ethercard, " -- cgit v1.2.3-70-g09d2 From ab1976682f31661a898b92593bccfeae14d0a0ae Mon Sep 17 00:00:00 2001 From: Stephen Hemminger Date: Mon, 14 Aug 2006 23:00:18 -0700 Subject: [PATCH] via-rhine: NAPI poll enable The poll_enable should be in init_registers before enabling interrupts, not in tx_timeout. Thanks for spotting it Roger. Signed-off-by: Stephen Hemminger Cc: Roger Luethi Signed-off-by: Andrew Morton Signed-off-by: Jeff Garzik --- drivers/net/via-rhine.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'drivers/net') diff --git a/drivers/net/via-rhine.c b/drivers/net/via-rhine.c index fee824002d1..fda367b92a2 100644 --- a/drivers/net/via-rhine.c +++ b/drivers/net/via-rhine.c @@ -1048,6 +1048,8 @@ static void init_registers(struct net_device *dev) rhine_set_rx_mode(dev); + netif_poll_enable(dev); + /* Enable interrupts by setting the interrupt mask. */ iowrite16(IntrRxDone | IntrRxErr | IntrRxEmpty| IntrRxOverflow | IntrRxDropped | IntrRxNoBuf | IntrTxAborted | @@ -1199,7 +1201,6 @@ static void rhine_tx_timeout(struct net_device *dev) dev->trans_start = jiffies; rp->stats.tx_errors++; netif_wake_queue(dev); - netif_poll_enable(dev); } static int rhine_start_tx(struct sk_buff *skb, struct net_device *dev) -- cgit v1.2.3-70-g09d2 From 76cb4fe7c0926c2c59f4a36ab169aa2d547c93d1 Mon Sep 17 00:00:00 2001 From: Russell King Date: Mon, 14 Aug 2006 23:00:20 -0700 Subject: [PATCH] lockdep: fix smc91x When booting using root-nfs, I'm seeing (independently) two lockdep dumps in the smc91x driver. The patch below fixes both. Both dumps look like real locking issues. Nico - please review and ack if you think the patch is correct. Dump 1: Sending DHCP requests . ================================= [ INFO: inconsistent lock state ] Signed-off-by: Jeff Garzik --- drivers/net/smc91x.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/smc91x.c b/drivers/net/smc91x.c index 3d8dcb6c875..cf62373b808 100644 --- a/drivers/net/smc91x.c +++ b/drivers/net/smc91x.c @@ -321,12 +321,12 @@ static void smc_reset(struct net_device *dev) DBG(2, "%s: %s\n", dev->name, __FUNCTION__); /* Disable all interrupts, block TX tasklet */ - spin_lock(&lp->lock); + spin_lock_irq(&lp->lock); SMC_SELECT_BANK(2); SMC_SET_INT_MASK(0); pending_skb = lp->pending_tx_skb; lp->pending_tx_skb = NULL; - spin_unlock(&lp->lock); + spin_unlock_irq(&lp->lock); /* free any pending tx skb */ if (pending_skb) { @@ -448,12 +448,12 @@ static void smc_shutdown(struct net_device *dev) DBG(2, "%s: %s\n", CARDNAME, __FUNCTION__); /* no more interrupts for me */ - spin_lock(&lp->lock); + spin_lock_irq(&lp->lock); SMC_SELECT_BANK(2); SMC_SET_INT_MASK(0); pending_skb = lp->pending_tx_skb; lp->pending_tx_skb = NULL; - spin_unlock(&lp->lock); + spin_unlock_irq(&lp->lock); if (pending_skb) dev_kfree_skb(pending_skb); -- cgit v1.2.3-70-g09d2 From b933b4d93888b584eda826bffa68a3a1283f8411 Mon Sep 17 00:00:00 2001 From: Roger Luethi Date: Mon, 14 Aug 2006 23:00:21 -0700 Subject: [PATCH] via-rhine: add option avoid_D3 (work around broken BIOSes) It looks like broken BIOSes controlling Rhine chips will remain in use in significant numbers; such systems fail to come up via PXE after they have been put into D3 (power-saving) mode. This patch adds a module option for disabling the call that puts the chip to sleep. Signed-off-by: Roger Luethi Cc: Jeff Garzik Cc: Joerg Bashir Cc: Tim Phipps Signed-off-by: Andrew Morton Signed-off-by: Jeff Garzik --- drivers/net/via-rhine.c | 12 +++++++++++- 1 file changed, 11 insertions(+), 1 deletion(-) (limited to 'drivers/net') diff --git a/drivers/net/via-rhine.c b/drivers/net/via-rhine.c index fda367b92a2..ae971080e2e 100644 --- a/drivers/net/via-rhine.c +++ b/drivers/net/via-rhine.c @@ -44,6 +44,10 @@ static int max_interrupt_work = 20; Setting to > 1518 effectively disables this feature. */ static int rx_copybreak; +/* Work-around for broken BIOSes: they are unable to get the chip back out of + power state D3 so PXE booting fails. bootparam(7): via-rhine.avoid_D3=1 */ +static int avoid_D3; + /* * In case you are looking for 'options[]' or 'full_duplex[]', they * are gone. Use ethtool(8) instead. @@ -120,9 +124,11 @@ MODULE_LICENSE("GPL"); module_param(max_interrupt_work, int, 0); module_param(debug, int, 0); module_param(rx_copybreak, int, 0); +module_param(avoid_D3, bool, 0); MODULE_PARM_DESC(max_interrupt_work, "VIA Rhine maximum events handled per interrupt"); MODULE_PARM_DESC(debug, "VIA Rhine debug level (0-7)"); MODULE_PARM_DESC(rx_copybreak, "VIA Rhine copy breakpoint for copy-only-tiny-frames"); +MODULE_PARM_DESC(avoid_D3, "Avoid power state D3 (work-around for broken BIOSes)"); /* Theory of Operation @@ -823,6 +829,9 @@ static int __devinit rhine_init_one(struct pci_dev *pdev, } } rp->mii_if.phy_id = phy_id; + if (debug > 1 && avoid_D3) + printk(KERN_INFO "%s: No D3 power state at shutdown.\n", + dev->name); return 0; @@ -1911,7 +1920,8 @@ static void rhine_shutdown (struct pci_dev *pdev) } /* Hit power state D3 (sleep) */ - iowrite8(ioread8(ioaddr + StickyHW) | 0x03, ioaddr + StickyHW); + if (!avoid_D3) + iowrite8(ioread8(ioaddr + StickyHW) | 0x03, ioaddr + StickyHW); /* TODO: Check use of pci_enable_wake() */ -- cgit v1.2.3-70-g09d2 From 7e29f8bf39de372e3903a0b12f34285d30a8a244 Mon Sep 17 00:00:00 2001 From: David Brownell Date: Mon, 14 Aug 2006 23:00:22 -0700 Subject: [PATCH] build fixes: smc91x Unclear how these bugs arrived, presumably from incorrect cleanup of the 16-bit-only paths, but smc91x wouldn't build for OMAP. Signed-off-by: David Brownell Cc: Nicolas Pitre Cc: Jeff Garzik Signed-off-by: Andrew Morton Signed-off-by: Jeff Garzik --- drivers/net/smc91x.h | 6 ------ 1 file changed, 6 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/smc91x.h b/drivers/net/smc91x.h index 95ac2ddca43..7aa7fbac822 100644 --- a/drivers/net/smc91x.h +++ b/drivers/net/smc91x.h @@ -184,16 +184,10 @@ SMC_outw(u16 val, void __iomem *ioaddr, int reg) #define SMC_IO_SHIFT 0 #define SMC_NOWAIT 1 -#define SMC_inb(a, r) readb((a) + (r)) -#define SMC_outb(v, a, r) writeb(v, (a) + (r)) #define SMC_inw(a, r) readw((a) + (r)) #define SMC_outw(v, a, r) writew(v, (a) + (r)) #define SMC_insw(a, r, p, l) readsw((a) + (r), p, l) #define SMC_outsw(a, r, p, l) writesw((a) + (r), p, l) -#define SMC_inl(a, r) readl((a) + (r)) -#define SMC_outl(v, a, r) writel(v, (a) + (r)) -#define SMC_insl(a, r, p, l) readsl((a) + (r), p, l) -#define SMC_outsl(a, r, p, l) writesl((a) + (r), p, l) #include #include -- cgit v1.2.3-70-g09d2 From b68a60e598c0d1e738c807c47cb181e8cc52a0d8 Mon Sep 17 00:00:00 2001 From: Jim Lewis Date: Mon, 14 Aug 2006 23:00:23 -0700 Subject: [PATCH] Add ethtool -g support to Spidernet network driver Add ethtool -g (show ring sizes) support to the Spidernet network driver. Signed-off-by: James K Lewis Signed-off-by: Andrew Morton Signed-off-by: Jeff Garzik --- drivers/net/spider_net.c | 12 +++++++----- drivers/net/spider_net.h | 3 +++ drivers/net/spider_net_ethtool.c | 13 +++++++++++++ 3 files changed, 23 insertions(+), 5 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/spider_net.c b/drivers/net/spider_net.c index 647f62e9707..88907218457 100644 --- a/drivers/net/spider_net.c +++ b/drivers/net/spider_net.c @@ -1611,13 +1611,12 @@ spider_net_open(struct net_device *netdev) int result; result = -ENOMEM; - if (spider_net_init_chain(card, &card->tx_chain, - card->descr, - PCI_DMA_TODEVICE, tx_descriptors)) + if (spider_net_init_chain(card, &card->tx_chain, card->descr, + PCI_DMA_TODEVICE, card->tx_desc)) goto alloc_tx_failed; if (spider_net_init_chain(card, &card->rx_chain, - card->descr + tx_descriptors, - PCI_DMA_FROMDEVICE, rx_descriptors)) + card->descr + card->rx_desc, + PCI_DMA_FROMDEVICE, card->rx_desc)) goto alloc_rx_failed; /* allocate rx skbs */ @@ -2005,6 +2004,9 @@ spider_net_setup_netdev(struct spider_net_card *card) card->options.rx_csum = SPIDER_NET_RX_CSUM_DEFAULT; + card->tx_desc = tx_descriptors; + card->rx_desc = rx_descriptors; + spider_net_setup_netdev_ops(netdev); netdev->features = NETIF_F_HW_CSUM | NETIF_F_LLTX; diff --git a/drivers/net/spider_net.h b/drivers/net/spider_net.h index f6dcf180ae3..30407cdf089 100644 --- a/drivers/net/spider_net.h +++ b/drivers/net/spider_net.h @@ -440,6 +440,9 @@ struct spider_net_card { /* for ethtool */ int msg_enable; + int rx_desc; + int tx_desc; + struct spider_net_descr descr[0]; }; diff --git a/drivers/net/spider_net_ethtool.c b/drivers/net/spider_net_ethtool.c index a5bb0b7633a..02209222b8c 100644 --- a/drivers/net/spider_net_ethtool.c +++ b/drivers/net/spider_net_ethtool.c @@ -130,6 +130,18 @@ spider_net_ethtool_set_tx_csum(struct net_device *netdev, uint32_t data) return 0; } +static void +spider_net_ethtool_get_ringparam(struct net_device *netdev, + struct ethtool_ringparam *ering) +{ + struct spider_net_card *card = netdev->priv; + + ering->tx_max_pending = SPIDER_NET_TX_DESCRIPTORS_MAX; + ering->tx_pending = card->tx_desc; + ering->rx_max_pending = SPIDER_NET_RX_DESCRIPTORS_MAX; + ering->rx_pending = card->rx_desc; +} + struct ethtool_ops spider_net_ethtool_ops = { .get_settings = spider_net_ethtool_get_settings, .get_drvinfo = spider_net_ethtool_get_drvinfo, @@ -141,5 +153,6 @@ struct ethtool_ops spider_net_ethtool_ops = { .set_rx_csum = spider_net_ethtool_set_rx_csum, .get_tx_csum = spider_net_ethtool_get_tx_csum, .set_tx_csum = spider_net_ethtool_set_tx_csum, + .get_ringparam = spider_net_ethtool_get_ringparam, }; -- cgit v1.2.3-70-g09d2 From 239e44e1f05e2163ee066c07a753f9fb445979b2 Mon Sep 17 00:00:00 2001 From: "Edgar E. Iglesias" Date: Mon, 14 Aug 2006 23:00:24 -0700 Subject: [PATCH] skge: remember to run netif_poll_disable() Signed-off-by: Edgar E. Iglesias Cc: Stephen Hemminger Cc: Jeff Garzik Signed-off-by: Andrew Morton Signed-off-by: Jeff Garzik --- drivers/net/skge.c | 2 ++ 1 file changed, 2 insertions(+) (limited to 'drivers/net') diff --git a/drivers/net/skge.c b/drivers/net/skge.c index 7de9a07b2ac..ad878dfddef 100644 --- a/drivers/net/skge.c +++ b/drivers/net/skge.c @@ -2211,6 +2211,7 @@ static int skge_up(struct net_device *dev) skge_write8(hw, Q_ADDR(rxqaddr[port], Q_CSR), CSR_START | CSR_IRQ_CL_F); skge_led(skge, LED_MODE_ON); + netif_poll_enable(dev); return 0; free_rx_ring: @@ -2279,6 +2280,7 @@ static int skge_down(struct net_device *dev) skge_led(skge, LED_MODE_OFF); + netif_poll_disable(dev); skge_tx_clean(skge); skge_rx_clean(skge); -- cgit v1.2.3-70-g09d2 From ec42cdb624059bb9d9d1accca5ed4345bf8f5fda Mon Sep 17 00:00:00 2001 From: Alexey Dobriyan Date: Mon, 14 Aug 2006 23:00:28 -0700 Subject: [PATCH] xircom_cb: wire up errors from pci_register_driver() Signed-off-by: Alexey Dobriyan Cc: Jeff Garzik Cc: Dominik Brodowski Cc: Valerie Henson Signed-off-by: Andrew Morton Signed-off-by: Jeff Garzik --- drivers/net/tulip/xircom_cb.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/tulip/xircom_cb.c b/drivers/net/tulip/xircom_cb.c index f874e4f6ccf..cf43390d2c8 100644 --- a/drivers/net/tulip/xircom_cb.c +++ b/drivers/net/tulip/xircom_cb.c @@ -1264,8 +1264,7 @@ static void investigate_write_descriptor(struct net_device *dev, struct xircom_p static int __init xircom_init(void) { - pci_register_driver(&xircom_ops); - return 0; + return pci_register_driver(&xircom_ops); } static void __exit xircom_exit(void) -- cgit v1.2.3-70-g09d2 From 11b0bacd717c285c94dbb56505a28434b34f0639 Mon Sep 17 00:00:00 2001 From: Vitaly Bordug Date: Mon, 14 Aug 2006 23:00:29 -0700 Subject: [PATCH] PAL: Support of the fixed PHY This makes it possible for HW PHY-less boards to utilize PAL goodies. Generic routines to connect to fixed PHY are provided, as well as ability to specify software callback that fills up link, speed, etc. information into PHY descriptor (the latter feature not tested so far). Signed-off-by: Vitaly Bordug Signed-off-by: Andrew Morton Signed-off-by: Jeff Garzik --- drivers/net/phy/Kconfig | 17 ++ drivers/net/phy/Makefile | 1 + drivers/net/phy/fixed.c | 358 +++++++++++++++++++++++++++++++++++++++++++ drivers/net/phy/mdio_bus.c | 1 + drivers/net/phy/phy_device.c | 51 +++--- include/linux/phy.h | 1 + 6 files changed, 408 insertions(+), 21 deletions(-) create mode 100644 drivers/net/phy/fixed.c (limited to 'drivers/net') diff --git a/drivers/net/phy/Kconfig b/drivers/net/phy/Kconfig index 2ba6d3a40e2..b79ec0d7480 100644 --- a/drivers/net/phy/Kconfig +++ b/drivers/net/phy/Kconfig @@ -56,5 +56,22 @@ config SMSC_PHY ---help--- Currently supports the LAN83C185 PHY +config FIXED_PHY + tristate "Drivers for PHY emulation on fixed speed/link" + depends on PHYLIB + ---help--- + Adds the driver to PHY layer to cover the boards that do not have any PHY bound, + but with the ability to manipulate with speed/link in software. The relavant MII + speed/duplex parameters could be effectively handled in user-specified fuction. + Currently tested with mpc866ads. + +config FIXED_MII_10_FDX + bool "Emulation for 10M Fdx fixed PHY behavior" + depends on FIXED_PHY + +config FIXED_MII_100_FDX + bool "Emulation for 100M Fdx fixed PHY behavior" + depends on FIXED_PHY + endmenu diff --git a/drivers/net/phy/Makefile b/drivers/net/phy/Makefile index a00e6194252..320f8323123 100644 --- a/drivers/net/phy/Makefile +++ b/drivers/net/phy/Makefile @@ -10,3 +10,4 @@ obj-$(CONFIG_LXT_PHY) += lxt.o obj-$(CONFIG_QSEMI_PHY) += qsemi.o obj-$(CONFIG_SMSC_PHY) += smsc.o obj-$(CONFIG_VITESSE_PHY) += vitesse.o +obj-$(CONFIG_FIXED_PHY) += fixed.o diff --git a/drivers/net/phy/fixed.c b/drivers/net/phy/fixed.c new file mode 100644 index 00000000000..341036df471 --- /dev/null +++ b/drivers/net/phy/fixed.c @@ -0,0 +1,358 @@ +/* + * drivers/net/phy/fixed.c + * + * Driver for fixed PHYs, when transceiver is able to operate in one fixed mode. + * + * Author: Vitaly Bordug + * + * Copyright (c) 2006 MontaVista Software, Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + */ +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include + +#define MII_REGS_NUM 7 + +/* + The idea is to emulate normal phy behavior by responding with + pre-defined values to mii BMCR read, so that read_status hook could + take all the needed info. +*/ + +struct fixed_phy_status { + u8 link; + u16 speed; + u8 duplex; +}; + +/*----------------------------------------------------------------------------- + * Private information hoder for mii_bus + *-----------------------------------------------------------------------------*/ +struct fixed_info { + u16 *regs; + u8 regs_num; + struct fixed_phy_status phy_status; + struct phy_device *phydev; /* pointer to the container */ + /* link & speed cb */ + int(*link_update)(struct net_device*, struct fixed_phy_status*); + +}; + +/*----------------------------------------------------------------------------- + * If something weird is required to be done with link/speed, + * network driver is able to assign a function to implement this. + * May be useful for PHY's that need to be software-driven. + *-----------------------------------------------------------------------------*/ +int fixed_mdio_set_link_update(struct phy_device* phydev, + int(*link_update)(struct net_device*, struct fixed_phy_status*)) +{ + struct fixed_info *fixed; + + if(link_update == NULL) + return -EINVAL; + + if(phydev) { + if(phydev->bus) { + fixed = phydev->bus->priv; + fixed->link_update = link_update; + return 0; + } + } + return -EINVAL; +} +EXPORT_SYMBOL(fixed_mdio_set_link_update); + +/*----------------------------------------------------------------------------- + * This is used for updating internal mii regs from the status + *-----------------------------------------------------------------------------*/ +static int fixed_mdio_update_regs(struct fixed_info *fixed) +{ + u16 *regs = fixed->regs; + u16 bmsr = 0; + u16 bmcr = 0; + + if(!regs) { + printk(KERN_ERR "%s: regs not set up", __FUNCTION__); + return -EINVAL; + } + + if(fixed->phy_status.link) + bmsr |= BMSR_LSTATUS; + + if(fixed->phy_status.duplex) { + bmcr |= BMCR_FULLDPLX; + + switch ( fixed->phy_status.speed ) { + case 100: + bmsr |= BMSR_100FULL; + bmcr |= BMCR_SPEED100; + break; + + case 10: + bmsr |= BMSR_10FULL; + break; + } + } else { + switch ( fixed->phy_status.speed ) { + case 100: + bmsr |= BMSR_100HALF; + bmcr |= BMCR_SPEED100; + break; + + case 10: + bmsr |= BMSR_100HALF; + break; + } + } + + regs[MII_BMCR] = bmcr; + regs[MII_BMSR] = bmsr | 0x800; /*we are always capable of 10 hdx*/ + + return 0; +} + +static int fixed_mii_read(struct mii_bus *bus, int phy_id, int location) +{ + struct fixed_info *fixed = bus->priv; + + /* if user has registered link update callback, use it */ + if(fixed->phydev) + if(fixed->phydev->attached_dev) { + if(fixed->link_update) { + fixed->link_update(fixed->phydev->attached_dev, + &fixed->phy_status); + fixed_mdio_update_regs(fixed); + } + } + + if ((unsigned int)location >= fixed->regs_num) + return -1; + return fixed->regs[location]; +} + +static int fixed_mii_write(struct mii_bus *bus, int phy_id, int location, u16 val) +{ + /* do nothing for now*/ + return 0; +} + +static int fixed_mii_reset(struct mii_bus *bus) +{ + /*nothing here - no way/need to reset it*/ + return 0; +} + +static int fixed_config_aneg(struct phy_device *phydev) +{ + /* :TODO:03/13/2006 09:45:37 PM:: + The full autoneg funcionality can be emulated, + but no need to have anything here for now + */ + return 0; +} + +/*----------------------------------------------------------------------------- + * the manual bind will do the magic - with phy_id_mask == 0 + * match will never return true... + *-----------------------------------------------------------------------------*/ +static struct phy_driver fixed_mdio_driver = { + .name = "Fixed PHY", + .features = PHY_BASIC_FEATURES, + .config_aneg = fixed_config_aneg, + .read_status = genphy_read_status, + .driver = { .owner = THIS_MODULE,}, +}; + +/*----------------------------------------------------------------------------- + * This func is used to create all the necessary stuff, bind + * the fixed phy driver and register all it on the mdio_bus_type. + * speed is either 10 or 100, duplex is boolean. + * number is used to create multiple fixed PHYs, so that several devices can + * utilize them simultaneously. + *-----------------------------------------------------------------------------*/ +static int fixed_mdio_register_device(int number, int speed, int duplex) +{ + struct mii_bus *new_bus; + struct fixed_info *fixed; + struct phy_device *phydev; + int err = 0; + + struct device* dev = kzalloc(sizeof(struct device), GFP_KERNEL); + + if (NULL == dev) + return -ENOMEM; + + new_bus = kzalloc(sizeof(struct mii_bus), GFP_KERNEL); + + if (NULL == new_bus) { + kfree(dev); + return -ENOMEM; + } + fixed = kzalloc(sizeof(struct fixed_info), GFP_KERNEL); + + if (NULL == fixed) { + kfree(dev); + kfree(new_bus); + return -ENOMEM; + } + + fixed->regs = kzalloc(MII_REGS_NUM*sizeof(int), GFP_KERNEL); + fixed->regs_num = MII_REGS_NUM; + fixed->phy_status.speed = speed; + fixed->phy_status.duplex = duplex; + fixed->phy_status.link = 1; + + new_bus->name = "Fixed MII Bus", + new_bus->read = &fixed_mii_read, + new_bus->write = &fixed_mii_write, + new_bus->reset = &fixed_mii_reset, + + /*set up workspace*/ + fixed_mdio_update_regs(fixed); + new_bus->priv = fixed; + + new_bus->dev = dev; + dev_set_drvdata(dev, new_bus); + + /* create phy_device and register it on the mdio bus */ + phydev = phy_device_create(new_bus, 0, 0); + + /* + Put the phydev pointer into the fixed pack so that bus read/write code could + be able to access for instance attached netdev. Well it doesn't have to do + so, only in case of utilizing user-specified link-update... + */ + fixed->phydev = phydev; + + if(NULL == phydev) { + err = -ENOMEM; + goto device_create_fail; + } + + phydev->irq = -1; + phydev->dev.bus = &mdio_bus_type; + + if(number) + snprintf(phydev->dev.bus_id, BUS_ID_SIZE, + "fixed_%d@%d:%d", number, speed, duplex); + else + snprintf(phydev->dev.bus_id, BUS_ID_SIZE, + "fixed@%d:%d", speed, duplex); + phydev->bus = new_bus; + + err = device_register(&phydev->dev); + if(err) { + printk(KERN_ERR "Phy %s failed to register\n", + phydev->dev.bus_id); + goto bus_register_fail; + } + + /* + the mdio bus has phy_id match... In order not to do it + artificially, we are binding the driver here by hand; + it will be the same for all the fixed phys anyway. + */ + down_write(&phydev->dev.bus->subsys.rwsem); + + phydev->dev.driver = &fixed_mdio_driver.driver; + + err = phydev->dev.driver->probe(&phydev->dev); + if(err < 0) { + printk(KERN_ERR "Phy %s: problems with fixed driver\n",phydev->dev.bus_id); + up_write(&phydev->dev.bus->subsys.rwsem); + goto probe_fail; + } + + device_bind_driver(&phydev->dev); + up_write(&phydev->dev.bus->subsys.rwsem); + + return 0; + +probe_fail: + device_unregister(&phydev->dev); +bus_register_fail: + kfree(phydev); +device_create_fail: + kfree(dev); + kfree(new_bus); + kfree(fixed); + + return err; +} + + +MODULE_DESCRIPTION("Fixed PHY device & driver for PAL"); +MODULE_AUTHOR("Vitaly Bordug"); +MODULE_LICENSE("GPL"); + +static int __init fixed_init(void) +{ + int ret; + int duplex = 0; + + /* register on the bus... Not expected to be matched with anything there... */ + phy_driver_register(&fixed_mdio_driver); + + /* So let the fun begin... + We will create several mdio devices here, and will bound the upper + driver to them. + + Then the external software can lookup the phy bus by searching + fixed@speed:duplex, e.g. fixed@100:1, to be connected to the + virtual 100M Fdx phy. + + In case several virtual PHYs required, the bus_id will be in form + fixed_@:, which make it able even to define + driver-specific link control callback, if for instance PHY is completely + SW-driven. + + */ + +#ifdef CONFIG_FIXED_MII_DUPLEX + duplex = 1; +#endif + +#ifdef CONFIG_FIXED_MII_100_FDX + fixed_mdio_register_device(0, 100, 1); +#endif + +#ifdef CONFIX_FIXED_MII_10_FDX + fixed_mdio_register_device(0, 10, 1); +#endif + return 0; +} + +static void __exit fixed_exit(void) +{ + phy_driver_unregister(&fixed_mdio_driver); + /* :WARNING:02/18/2006 04:32:40 AM:: Cleanup all the created stuff */ +} + +module_init(fixed_init); +module_exit(fixed_exit); diff --git a/drivers/net/phy/mdio_bus.c b/drivers/net/phy/mdio_bus.c index 1dde390c164..cf6660c93ff 100644 --- a/drivers/net/phy/mdio_bus.c +++ b/drivers/net/phy/mdio_bus.c @@ -159,6 +159,7 @@ struct bus_type mdio_bus_type = { .suspend = mdio_bus_suspend, .resume = mdio_bus_resume, }; +EXPORT_SYMBOL(mdio_bus_type); int __init mdio_bus_init(void) { diff --git a/drivers/net/phy/phy_device.c b/drivers/net/phy/phy_device.c index 1bc1e032c5d..2d1ecfdc80d 100644 --- a/drivers/net/phy/phy_device.c +++ b/drivers/net/phy/phy_device.c @@ -45,6 +45,35 @@ static struct phy_driver genphy_driver; extern int mdio_bus_init(void); extern void mdio_bus_exit(void); +struct phy_device* phy_device_create(struct mii_bus *bus, int addr, int phy_id) +{ + struct phy_device *dev; + /* We allocate the device, and initialize the + * default values */ + dev = kcalloc(1, sizeof(*dev), GFP_KERNEL); + + if (NULL == dev) + return (struct phy_device*) PTR_ERR((void*)-ENOMEM); + + dev->speed = 0; + dev->duplex = -1; + dev->pause = dev->asym_pause = 0; + dev->link = 1; + + dev->autoneg = AUTONEG_ENABLE; + + dev->addr = addr; + dev->phy_id = phy_id; + dev->bus = bus; + + dev->state = PHY_DOWN; + + spin_lock_init(&dev->lock); + + return dev; +} +EXPORT_SYMBOL(phy_device_create); + /* get_phy_device * * description: Reads the ID registers of the PHY at addr on the @@ -78,27 +107,7 @@ struct phy_device * get_phy_device(struct mii_bus *bus, int addr) if (0xffffffff == phy_id) return NULL; - /* Otherwise, we allocate the device, and initialize the - * default values */ - dev = kcalloc(1, sizeof(*dev), GFP_KERNEL); - - if (NULL == dev) - return ERR_PTR(-ENOMEM); - - dev->speed = 0; - dev->duplex = -1; - dev->pause = dev->asym_pause = 0; - dev->link = 1; - - dev->autoneg = AUTONEG_ENABLE; - - dev->addr = addr; - dev->phy_id = phy_id; - dev->bus = bus; - - dev->state = PHY_DOWN; - - spin_lock_init(&dev->lock); + dev = phy_device_create(bus, addr, phy_id); return dev; } diff --git a/include/linux/phy.h b/include/linux/phy.h index 331521a10a2..9447a57ee8a 100644 --- a/include/linux/phy.h +++ b/include/linux/phy.h @@ -378,6 +378,7 @@ int phy_mii_ioctl(struct phy_device *phydev, struct mii_ioctl_data *mii_data, int cmd); int phy_start_interrupts(struct phy_device *phydev); void phy_print_status(struct phy_device *phydev); +struct phy_device* phy_device_create(struct mii_bus *bus, int addr, int phy_id); extern struct bus_type mdio_bus_type; #endif /* __PHY_H */ -- cgit v1.2.3-70-g09d2 From 5b4b8454344a0391bb0f69fda0f4ec8e1f0d2fed Mon Sep 17 00:00:00 2001 From: Vitaly Bordug Date: Mon, 14 Aug 2006 23:00:30 -0700 Subject: [PATCH] FS_ENET: use PAL for mii management This patch should update the fs_enet infrastructure to utilize Phy Abstraction Layer subsystem. Along with the above, there are apparent bugfixes, overhaul and improvements. Signed-off-by: Vitaly Bordug Signed-off-by: Andrew Morton Signed-off-by: Jeff Garzik --- drivers/net/fs_enet/Makefile | 6 +- drivers/net/fs_enet/fec.h | 42 +++ drivers/net/fs_enet/fs_enet-main.c | 207 +++++++++------ drivers/net/fs_enet/fs_enet-mii.c | 505 ------------------------------------- drivers/net/fs_enet/fs_enet.h | 40 +-- drivers/net/fs_enet/mac-fcc.c | 32 ++- drivers/net/fs_enet/mac-fec.c | 142 ++--------- drivers/net/fs_enet/mac-scc.c | 4 +- drivers/net/fs_enet/mii-bitbang.c | 448 ++++++++++++++++---------------- drivers/net/fs_enet/mii-fec.c | 243 ++++++++++++++++++ drivers/net/fs_enet/mii-fixed.c | 91 ------- 11 files changed, 711 insertions(+), 1049 deletions(-) create mode 100644 drivers/net/fs_enet/fec.h delete mode 100644 drivers/net/fs_enet/fs_enet-mii.c create mode 100644 drivers/net/fs_enet/mii-fec.c delete mode 100644 drivers/net/fs_enet/mii-fixed.c (limited to 'drivers/net') diff --git a/drivers/net/fs_enet/Makefile b/drivers/net/fs_enet/Makefile index d6dd3f2fb43..02d4dc18ba6 100644 --- a/drivers/net/fs_enet/Makefile +++ b/drivers/net/fs_enet/Makefile @@ -4,7 +4,7 @@ obj-$(CONFIG_FS_ENET) += fs_enet.o -obj-$(CONFIG_8xx) += mac-fec.o mac-scc.o -obj-$(CONFIG_8260) += mac-fcc.o +obj-$(CONFIG_8xx) += mac-fec.o mac-scc.o mii-fec.o +obj-$(CONFIG_CPM2) += mac-fcc.o mii-bitbang.o -fs_enet-objs := fs_enet-main.o fs_enet-mii.o mii-bitbang.o mii-fixed.o +fs_enet-objs := fs_enet-main.o diff --git a/drivers/net/fs_enet/fec.h b/drivers/net/fs_enet/fec.h new file mode 100644 index 00000000000..e980527e2b9 --- /dev/null +++ b/drivers/net/fs_enet/fec.h @@ -0,0 +1,42 @@ +#ifndef FS_ENET_FEC_H +#define FS_ENET_FEC_H + +/* CRC polynomium used by the FEC for the multicast group filtering */ +#define FEC_CRC_POLY 0x04C11DB7 + +#define FEC_MAX_MULTICAST_ADDRS 64 + +/* Interrupt events/masks. +*/ +#define FEC_ENET_HBERR 0x80000000U /* Heartbeat error */ +#define FEC_ENET_BABR 0x40000000U /* Babbling receiver */ +#define FEC_ENET_BABT 0x20000000U /* Babbling transmitter */ +#define FEC_ENET_GRA 0x10000000U /* Graceful stop complete */ +#define FEC_ENET_TXF 0x08000000U /* Full frame transmitted */ +#define FEC_ENET_TXB 0x04000000U /* A buffer was transmitted */ +#define FEC_ENET_RXF 0x02000000U /* Full frame received */ +#define FEC_ENET_RXB 0x01000000U /* A buffer was received */ +#define FEC_ENET_MII 0x00800000U /* MII interrupt */ +#define FEC_ENET_EBERR 0x00400000U /* SDMA bus error */ + +#define FEC_ECNTRL_PINMUX 0x00000004 +#define FEC_ECNTRL_ETHER_EN 0x00000002 +#define FEC_ECNTRL_RESET 0x00000001 + +#define FEC_RCNTRL_BC_REJ 0x00000010 +#define FEC_RCNTRL_PROM 0x00000008 +#define FEC_RCNTRL_MII_MODE 0x00000004 +#define FEC_RCNTRL_DRT 0x00000002 +#define FEC_RCNTRL_LOOP 0x00000001 + +#define FEC_TCNTRL_FDEN 0x00000004 +#define FEC_TCNTRL_HBC 0x00000002 +#define FEC_TCNTRL_GTS 0x00000001 + + + +/* + * Delay to wait for FEC reset command to complete (in us) + */ +#define FEC_RESET_DELAY 50 +#endif diff --git a/drivers/net/fs_enet/fs_enet-main.c b/drivers/net/fs_enet/fs_enet-main.c index f6abff5846b..df62506a178 100644 --- a/drivers/net/fs_enet/fs_enet-main.c +++ b/drivers/net/fs_enet/fs_enet-main.c @@ -37,6 +37,7 @@ #include #include #include +#include #include #include @@ -682,35 +683,6 @@ static void fs_free_irq(struct net_device *dev, int irq) (*fep->ops->post_free_irq)(dev, irq); } -/**********************************************************************************/ - -/* This interrupt occurs when the PHY detects a link change. */ -static irqreturn_t -fs_mii_link_interrupt(int irq, void *dev_id, struct pt_regs *regs) -{ - struct net_device *dev = dev_id; - struct fs_enet_private *fep; - const struct fs_platform_info *fpi; - - fep = netdev_priv(dev); - fpi = fep->fpi; - - /* - * Acknowledge the interrupt if possible. If we have not - * found the PHY yet we can't process or acknowledge the - * interrupt now. Instead we ignore this interrupt for now, - * which we can do since it is edge triggered. It will be - * acknowledged later by fs_enet_open(). - */ - if (!fep->phy) - return IRQ_NONE; - - fs_mii_ack_int(dev); - fs_mii_link_status_change_check(dev, 0); - - return IRQ_HANDLED; -} - static void fs_timeout(struct net_device *dev) { struct fs_enet_private *fep = netdev_priv(dev); @@ -722,10 +694,13 @@ static void fs_timeout(struct net_device *dev) spin_lock_irqsave(&fep->lock, flags); if (dev->flags & IFF_UP) { + phy_stop(fep->phydev); (*fep->ops->stop)(dev); (*fep->ops->restart)(dev); + phy_start(fep->phydev); } + phy_start(fep->phydev); wake = fep->tx_free && !(CBDR_SC(fep->cur_tx) & BD_ENET_TX_READY); spin_unlock_irqrestore(&fep->lock, flags); @@ -733,35 +708,112 @@ static void fs_timeout(struct net_device *dev) netif_wake_queue(dev); } +/*----------------------------------------------------------------------------- + * generic link-change handler - should be sufficient for most cases + *-----------------------------------------------------------------------------*/ +static void generic_adjust_link(struct net_device *dev) +{ + struct fs_enet_private *fep = netdev_priv(dev); + struct phy_device *phydev = fep->phydev; + int new_state = 0; + + if (phydev->link) { + + /* adjust to duplex mode */ + if (phydev->duplex != fep->oldduplex){ + new_state = 1; + fep->oldduplex = phydev->duplex; + } + + if (phydev->speed != fep->oldspeed) { + new_state = 1; + fep->oldspeed = phydev->speed; + } + + if (!fep->oldlink) { + new_state = 1; + fep->oldlink = 1; + netif_schedule(dev); + netif_carrier_on(dev); + netif_start_queue(dev); + } + + if (new_state) + fep->ops->restart(dev); + + } else if (fep->oldlink) { + new_state = 1; + fep->oldlink = 0; + fep->oldspeed = 0; + fep->oldduplex = -1; + netif_carrier_off(dev); + netif_stop_queue(dev); + } + + if (new_state && netif_msg_link(fep)) + phy_print_status(phydev); +} + + +static void fs_adjust_link(struct net_device *dev) +{ + struct fs_enet_private *fep = netdev_priv(dev); + unsigned long flags; + + spin_lock_irqsave(&fep->lock, flags); + + if(fep->ops->adjust_link) + fep->ops->adjust_link(dev); + else + generic_adjust_link(dev); + + spin_unlock_irqrestore(&fep->lock, flags); +} + +static int fs_init_phy(struct net_device *dev) +{ + struct fs_enet_private *fep = netdev_priv(dev); + struct phy_device *phydev; + + fep->oldlink = 0; + fep->oldspeed = 0; + fep->oldduplex = -1; + if(fep->fpi->bus_id) + phydev = phy_connect(dev, fep->fpi->bus_id, &fs_adjust_link, 0); + else { + printk("No phy bus ID specified in BSP code\n"); + return -EINVAL; + } + if (IS_ERR(phydev)) { + printk(KERN_ERR "%s: Could not attach to PHY\n", dev->name); + return PTR_ERR(phydev); + } + + fep->phydev = phydev; + + return 0; +} + + static int fs_enet_open(struct net_device *dev) { struct fs_enet_private *fep = netdev_priv(dev); - const struct fs_platform_info *fpi = fep->fpi; int r; + int err; /* Install our interrupt handler. */ r = fs_request_irq(dev, fep->interrupt, "fs_enet-mac", fs_enet_interrupt); if (r != 0) { printk(KERN_ERR DRV_MODULE_NAME - ": %s Could not allocate FEC IRQ!", dev->name); + ": %s Could not allocate FS_ENET IRQ!", dev->name); return -EINVAL; } - /* Install our phy interrupt handler */ - if (fpi->phy_irq != -1) { - - r = fs_request_irq(dev, fpi->phy_irq, "fs_enet-phy", fs_mii_link_interrupt); - if (r != 0) { - printk(KERN_ERR DRV_MODULE_NAME - ": %s Could not allocate PHY IRQ!", dev->name); - fs_free_irq(dev, fep->interrupt); - return -EINVAL; - } - } + err = fs_init_phy(dev); + if(err) + return err; - fs_mii_startup(dev); - netif_carrier_off(dev); - fs_mii_link_status_change_check(dev, 1); + phy_start(fep->phydev); return 0; } @@ -769,20 +821,19 @@ static int fs_enet_open(struct net_device *dev) static int fs_enet_close(struct net_device *dev) { struct fs_enet_private *fep = netdev_priv(dev); - const struct fs_platform_info *fpi = fep->fpi; unsigned long flags; netif_stop_queue(dev); netif_carrier_off(dev); - fs_mii_shutdown(dev); + phy_stop(fep->phydev); spin_lock_irqsave(&fep->lock, flags); (*fep->ops->stop)(dev); spin_unlock_irqrestore(&fep->lock, flags); /* release any irqs */ - if (fpi->phy_irq != -1) - fs_free_irq(dev, fpi->phy_irq); + phy_disconnect(fep->phydev); + fep->phydev = NULL; fs_free_irq(dev, fep->interrupt); return 0; @@ -830,33 +881,19 @@ static void fs_get_regs(struct net_device *dev, struct ethtool_regs *regs, static int fs_get_settings(struct net_device *dev, struct ethtool_cmd *cmd) { struct fs_enet_private *fep = netdev_priv(dev); - unsigned long flags; - int rc; - - spin_lock_irqsave(&fep->lock, flags); - rc = mii_ethtool_gset(&fep->mii_if, cmd); - spin_unlock_irqrestore(&fep->lock, flags); - - return rc; + return phy_ethtool_gset(fep->phydev, cmd); } static int fs_set_settings(struct net_device *dev, struct ethtool_cmd *cmd) { struct fs_enet_private *fep = netdev_priv(dev); - unsigned long flags; - int rc; - - spin_lock_irqsave(&fep->lock, flags); - rc = mii_ethtool_sset(&fep->mii_if, cmd); - spin_unlock_irqrestore(&fep->lock, flags); - - return rc; + phy_ethtool_sset(fep->phydev, cmd); + return 0; } static int fs_nway_reset(struct net_device *dev) { - struct fs_enet_private *fep = netdev_priv(dev); - return mii_nway_restart(&fep->mii_if); + return 0; } static u32 fs_get_msglevel(struct net_device *dev) @@ -898,7 +935,7 @@ static int fs_ioctl(struct net_device *dev, struct ifreq *rq, int cmd) return -EINVAL; spin_lock_irqsave(&fep->lock, flags); - rc = generic_mii_ioctl(&fep->mii_if, mii, cmd, NULL); + rc = phy_mii_ioctl(fep->phydev, mii, cmd); spin_unlock_irqrestore(&fep->lock, flags); return rc; } @@ -1030,12 +1067,6 @@ static struct net_device *fs_init_instance(struct device *dev, } registered = 1; - err = fs_mii_connect(ndev); - if (err != 0) { - printk(KERN_ERR DRV_MODULE_NAME - ": %s fs_mii_connect failed.\n", ndev->name); - goto err; - } return ndev; @@ -1073,8 +1104,6 @@ static int fs_cleanup_instance(struct net_device *ndev) fpi = fep->fpi; - fs_mii_disconnect(ndev); - unregister_netdev(ndev); dma_free_coherent(fep->dev, (fpi->tx_ring + fpi->rx_ring) * sizeof(cbd_t), @@ -1196,17 +1225,39 @@ static int __init fs_init(void) r = setup_immap(); if (r != 0) return r; - r = driver_register(&fs_enet_fec_driver); + +#ifdef CONFIG_FS_ENET_HAS_FCC + /* let's insert mii stuff */ + r = fs_enet_mdio_bb_init(); + + if (r != 0) { + printk(KERN_ERR DRV_MODULE_NAME + "BB PHY init failed.\n"); + return r; + } + r = driver_register(&fs_enet_fcc_driver); if (r != 0) goto err; +#endif - r = driver_register(&fs_enet_fcc_driver); +#ifdef CONFIG_FS_ENET_HAS_FEC + r = fs_enet_mdio_fec_init(); + if (r != 0) { + printk(KERN_ERR DRV_MODULE_NAME + "FEC PHY init failed.\n"); + return r; + } + + r = driver_register(&fs_enet_fec_driver); if (r != 0) goto err; +#endif +#ifdef CONFIG_FS_ENET_HAS_SCC r = driver_register(&fs_enet_scc_driver); if (r != 0) goto err; +#endif return 0; err: diff --git a/drivers/net/fs_enet/fs_enet-mii.c b/drivers/net/fs_enet/fs_enet-mii.c deleted file mode 100644 index b7e6e21725c..00000000000 --- a/drivers/net/fs_enet/fs_enet-mii.c +++ /dev/null @@ -1,505 +0,0 @@ -/* - * Combined Ethernet driver for Motorola MPC8xx and MPC82xx. - * - * Copyright (c) 2003 Intracom S.A. - * by Pantelis Antoniou - * - * 2005 (c) MontaVista Software, Inc. - * Vitaly Bordug - * - * Heavily based on original FEC driver by Dan Malek - * and modifications by Joakim Tjernlund - * - * This file is licensed under the terms of the GNU General Public License - * version 2. This program is licensed "as is" without any warranty of any - * kind, whether express or implied. - */ - - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include -#include - -#include "fs_enet.h" - -/*************************************************/ - -/* - * Generic PHY support. - * Should work for all PHYs, but link change is detected by polling - */ - -static void generic_timer_callback(unsigned long data) -{ - struct net_device *dev = (struct net_device *)data; - struct fs_enet_private *fep = netdev_priv(dev); - - fep->phy_timer_list.expires = jiffies + HZ / 2; - - add_timer(&fep->phy_timer_list); - - fs_mii_link_status_change_check(dev, 0); -} - -static void generic_startup(struct net_device *dev) -{ - struct fs_enet_private *fep = netdev_priv(dev); - - fep->phy_timer_list.expires = jiffies + HZ / 2; /* every 500ms */ - fep->phy_timer_list.data = (unsigned long)dev; - fep->phy_timer_list.function = generic_timer_callback; - add_timer(&fep->phy_timer_list); -} - -static void generic_shutdown(struct net_device *dev) -{ - struct fs_enet_private *fep = netdev_priv(dev); - - del_timer_sync(&fep->phy_timer_list); -} - -/* ------------------------------------------------------------------------- */ -/* The Davicom DM9161 is used on the NETTA board */ - -/* register definitions */ - -#define MII_DM9161_ANAR 4 /* Aux. Config Register */ -#define MII_DM9161_ACR 16 /* Aux. Config Register */ -#define MII_DM9161_ACSR 17 /* Aux. Config/Status Register */ -#define MII_DM9161_10TCSR 18 /* 10BaseT Config/Status Reg. */ -#define MII_DM9161_INTR 21 /* Interrupt Register */ -#define MII_DM9161_RECR 22 /* Receive Error Counter Reg. */ -#define MII_DM9161_DISCR 23 /* Disconnect Counter Register */ - -static void dm9161_startup(struct net_device *dev) -{ - struct fs_enet_private *fep = netdev_priv(dev); - - fs_mii_write(dev, fep->mii_if.phy_id, MII_DM9161_INTR, 0x0000); - /* Start autonegotiation */ - fs_mii_write(dev, fep->mii_if.phy_id, MII_BMCR, 0x1200); - - set_current_state(TASK_UNINTERRUPTIBLE); - schedule_timeout(HZ*8); -} - -static void dm9161_ack_int(struct net_device *dev) -{ - struct fs_enet_private *fep = netdev_priv(dev); - - fs_mii_read(dev, fep->mii_if.phy_id, MII_DM9161_INTR); -} - -static void dm9161_shutdown(struct net_device *dev) -{ - struct fs_enet_private *fep = netdev_priv(dev); - - fs_mii_write(dev, fep->mii_if.phy_id, MII_DM9161_INTR, 0x0f00); -} - -/**********************************************************************************/ - -static const struct phy_info phy_info[] = { - { - .id = 0x00181b88, - .name = "DM9161", - .startup = dm9161_startup, - .ack_int = dm9161_ack_int, - .shutdown = dm9161_shutdown, - }, { - .id = 0, - .name = "GENERIC", - .startup = generic_startup, - .shutdown = generic_shutdown, - }, -}; - -/**********************************************************************************/ - -static int phy_id_detect(struct net_device *dev) -{ - struct fs_enet_private *fep = netdev_priv(dev); - const struct fs_platform_info *fpi = fep->fpi; - struct fs_enet_mii_bus *bus = fep->mii_bus; - int i, r, start, end, phytype, physubtype; - const struct phy_info *phy; - int phy_hwid, phy_id; - - phy_hwid = -1; - fep->phy = NULL; - - /* auto-detect? */ - if (fpi->phy_addr == -1) { - start = 1; - end = 32; - } else { /* direct */ - start = fpi->phy_addr; - end = start + 1; - } - - for (phy_id = start; phy_id < end; phy_id++) { - /* skip already used phy addresses on this bus */ - if (bus->usage_map & (1 << phy_id)) - continue; - r = fs_mii_read(dev, phy_id, MII_PHYSID1); - if (r == -1 || (phytype = (r & 0xffff)) == 0xffff) - continue; - r = fs_mii_read(dev, phy_id, MII_PHYSID2); - if (r == -1 || (physubtype = (r & 0xffff)) == 0xffff) - continue; - phy_hwid = (phytype << 16) | physubtype; - if (phy_hwid != -1) - break; - } - - if (phy_hwid == -1) { - printk(KERN_ERR DRV_MODULE_NAME - ": %s No PHY detected! range=0x%02x-0x%02x\n", - dev->name, start, end); - return -1; - } - - for (i = 0, phy = phy_info; i < ARRAY_SIZE(phy_info); i++, phy++) - if (phy->id == (phy_hwid >> 4) || phy->id == 0) - break; - - if (i >= ARRAY_SIZE(phy_info)) { - printk(KERN_ERR DRV_MODULE_NAME - ": %s PHY id 0x%08x is not supported!\n", - dev->name, phy_hwid); - return -1; - } - - fep->phy = phy; - - /* mark this address as used */ - bus->usage_map |= (1 << phy_id); - - printk(KERN_INFO DRV_MODULE_NAME - ": %s Phy @ 0x%x, type %s (0x%08x)%s\n", - dev->name, phy_id, fep->phy->name, phy_hwid, - fpi->phy_addr == -1 ? " (auto-detected)" : ""); - - return phy_id; -} - -void fs_mii_startup(struct net_device *dev) -{ - struct fs_enet_private *fep = netdev_priv(dev); - - if (fep->phy->startup) - (*fep->phy->startup) (dev); -} - -void fs_mii_shutdown(struct net_device *dev) -{ - struct fs_enet_private *fep = netdev_priv(dev); - - if (fep->phy->shutdown) - (*fep->phy->shutdown) (dev); -} - -void fs_mii_ack_int(struct net_device *dev) -{ - struct fs_enet_private *fep = netdev_priv(dev); - - if (fep->phy->ack_int) - (*fep->phy->ack_int) (dev); -} - -#define MII_LINK 0x0001 -#define MII_HALF 0x0002 -#define MII_FULL 0x0004 -#define MII_BASE4 0x0008 -#define MII_10M 0x0010 -#define MII_100M 0x0020 -#define MII_1G 0x0040 -#define MII_10G 0x0080 - -/* return full mii info at one gulp, with a usable form */ -static unsigned int mii_full_status(struct mii_if_info *mii) -{ - unsigned int status; - int bmsr, adv, lpa, neg; - struct fs_enet_private* fep = netdev_priv(mii->dev); - - /* first, a dummy read, needed to latch some MII phys */ - (void)mii->mdio_read(mii->dev, mii->phy_id, MII_BMSR); - bmsr = mii->mdio_read(mii->dev, mii->phy_id, MII_BMSR); - - /* no link */ - if ((bmsr & BMSR_LSTATUS) == 0) - return 0; - - status = MII_LINK; - - /* Lets look what ANEG says if it's supported - otherwize we shall - take the right values from the platform info*/ - if(!mii->force_media) { - /* autoneg not completed; don't bother */ - if ((bmsr & BMSR_ANEGCOMPLETE) == 0) - return 0; - - adv = (*mii->mdio_read)(mii->dev, mii->phy_id, MII_ADVERTISE); - lpa = (*mii->mdio_read)(mii->dev, mii->phy_id, MII_LPA); - - neg = lpa & adv; - } else { - neg = fep->fpi->bus_info->lpa; - } - - if (neg & LPA_100FULL) - status |= MII_FULL | MII_100M; - else if (neg & LPA_100BASE4) - status |= MII_FULL | MII_BASE4 | MII_100M; - else if (neg & LPA_100HALF) - status |= MII_HALF | MII_100M; - else if (neg & LPA_10FULL) - status |= MII_FULL | MII_10M; - else - status |= MII_HALF | MII_10M; - - return status; -} - -void fs_mii_link_status_change_check(struct net_device *dev, int init_media) -{ - struct fs_enet_private *fep = netdev_priv(dev); - struct mii_if_info *mii = &fep->mii_if; - unsigned int mii_status; - int ok_to_print, link, duplex, speed; - unsigned long flags; - - ok_to_print = netif_msg_link(fep); - - mii_status = mii_full_status(mii); - - if (!init_media && mii_status == fep->last_mii_status) - return; - - fep->last_mii_status = mii_status; - - link = !!(mii_status & MII_LINK); - duplex = !!(mii_status & MII_FULL); - speed = (mii_status & MII_100M) ? 100 : 10; - - if (link == 0) { - netif_carrier_off(mii->dev); - netif_stop_queue(dev); - if (!init_media) { - spin_lock_irqsave(&fep->lock, flags); - (*fep->ops->stop)(dev); - spin_unlock_irqrestore(&fep->lock, flags); - } - - if (ok_to_print) - printk(KERN_INFO "%s: link down\n", mii->dev->name); - - } else { - - mii->full_duplex = duplex; - - netif_carrier_on(mii->dev); - - spin_lock_irqsave(&fep->lock, flags); - fep->duplex = duplex; - fep->speed = speed; - (*fep->ops->restart)(dev); - spin_unlock_irqrestore(&fep->lock, flags); - - netif_start_queue(dev); - - if (ok_to_print) - printk(KERN_INFO "%s: link up, %dMbps, %s-duplex\n", - dev->name, speed, duplex ? "full" : "half"); - } -} - -/**********************************************************************************/ - -int fs_mii_read(struct net_device *dev, int phy_id, int location) -{ - struct fs_enet_private *fep = netdev_priv(dev); - struct fs_enet_mii_bus *bus = fep->mii_bus; - - unsigned long flags; - int ret; - - spin_lock_irqsave(&bus->mii_lock, flags); - ret = (*bus->mii_read)(bus, phy_id, location); - spin_unlock_irqrestore(&bus->mii_lock, flags); - - return ret; -} - -void fs_mii_write(struct net_device *dev, int phy_id, int location, int value) -{ - struct fs_enet_private *fep = netdev_priv(dev); - struct fs_enet_mii_bus *bus = fep->mii_bus; - unsigned long flags; - - spin_lock_irqsave(&bus->mii_lock, flags); - (*bus->mii_write)(bus, phy_id, location, value); - spin_unlock_irqrestore(&bus->mii_lock, flags); -} - -/*****************************************************************************/ - -/* list of all registered mii buses */ -static LIST_HEAD(fs_mii_bus_list); - -static struct fs_enet_mii_bus *lookup_bus(int method, int id) -{ - struct list_head *ptr; - struct fs_enet_mii_bus *bus; - - list_for_each(ptr, &fs_mii_bus_list) { - bus = list_entry(ptr, struct fs_enet_mii_bus, list); - if (bus->bus_info->method == method && - bus->bus_info->id == id) - return bus; - } - return NULL; -} - -static struct fs_enet_mii_bus *create_bus(const struct fs_mii_bus_info *bi) -{ - struct fs_enet_mii_bus *bus; - int ret = 0; - - bus = kmalloc(sizeof(*bus), GFP_KERNEL); - if (bus == NULL) { - ret = -ENOMEM; - goto err; - } - memset(bus, 0, sizeof(*bus)); - spin_lock_init(&bus->mii_lock); - bus->bus_info = bi; - bus->refs = 0; - bus->usage_map = 0; - - /* perform initialization */ - switch (bi->method) { - - case fsmii_fixed: - ret = fs_mii_fixed_init(bus); - if (ret != 0) - goto err; - break; - - case fsmii_bitbang: - ret = fs_mii_bitbang_init(bus); - if (ret != 0) - goto err; - break; -#ifdef CONFIG_FS_ENET_HAS_FEC - case fsmii_fec: - ret = fs_mii_fec_init(bus); - if (ret != 0) - goto err; - break; -#endif - default: - ret = -EINVAL; - goto err; - } - - list_add(&bus->list, &fs_mii_bus_list); - - return bus; - -err: - kfree(bus); - return ERR_PTR(ret); -} - -static void destroy_bus(struct fs_enet_mii_bus *bus) -{ - /* remove from bus list */ - list_del(&bus->list); - - /* nothing more needed */ - kfree(bus); -} - -int fs_mii_connect(struct net_device *dev) -{ - struct fs_enet_private *fep = netdev_priv(dev); - const struct fs_platform_info *fpi = fep->fpi; - struct fs_enet_mii_bus *bus = NULL; - - /* check method validity */ - switch (fpi->bus_info->method) { - case fsmii_fixed: - case fsmii_bitbang: - break; -#ifdef CONFIG_FS_ENET_HAS_FEC - case fsmii_fec: - break; -#endif - default: - printk(KERN_ERR DRV_MODULE_NAME - ": %s Unknown MII bus method (%d)!\n", - dev->name, fpi->bus_info->method); - return -EINVAL; - } - - bus = lookup_bus(fpi->bus_info->method, fpi->bus_info->id); - - /* if not found create new bus */ - if (bus == NULL) { - bus = create_bus(fpi->bus_info); - if (IS_ERR(bus)) { - printk(KERN_ERR DRV_MODULE_NAME - ": %s MII bus creation failure!\n", dev->name); - return PTR_ERR(bus); - } - } - - bus->refs++; - - fep->mii_bus = bus; - - fep->mii_if.dev = dev; - fep->mii_if.phy_id_mask = 0x1f; - fep->mii_if.reg_num_mask = 0x1f; - fep->mii_if.mdio_read = fs_mii_read; - fep->mii_if.mdio_write = fs_mii_write; - fep->mii_if.force_media = fpi->bus_info->disable_aneg; - fep->mii_if.phy_id = phy_id_detect(dev); - - return 0; -} - -void fs_mii_disconnect(struct net_device *dev) -{ - struct fs_enet_private *fep = netdev_priv(dev); - struct fs_enet_mii_bus *bus = NULL; - - bus = fep->mii_bus; - fep->mii_bus = NULL; - - if (--bus->refs <= 0) - destroy_bus(bus); -} diff --git a/drivers/net/fs_enet/fs_enet.h b/drivers/net/fs_enet/fs_enet.h index e7ec96c964a..95022c005f7 100644 --- a/drivers/net/fs_enet/fs_enet.h +++ b/drivers/net/fs_enet/fs_enet.h @@ -5,6 +5,7 @@ #include #include #include +#include #include @@ -12,12 +13,30 @@ #ifdef CONFIG_CPM1 #include + +struct fec_info { + fec_t* fecp; + u32 mii_speed; +}; #endif #ifdef CONFIG_CPM2 #include #endif +/* This is used to operate with pins. + Note that the actual port size may + be different; cpm(s) handle it OK */ +struct bb_info { + u8 mdio_dat_msk; + u8 mdio_dir_msk; + u8 *mdio_dir; + u8 *mdio_dat; + u8 mdc_msk; + u8 *mdc_dat; + int delay; +}; + /* hw driver ops */ struct fs_ops { int (*setup_data)(struct net_device *dev); @@ -25,6 +44,7 @@ struct fs_ops { void (*free_bd)(struct net_device *dev); void (*cleanup_data)(struct net_device *dev); void (*set_multicast_list)(struct net_device *dev); + void (*adjust_link)(struct net_device *dev); void (*restart)(struct net_device *dev); void (*stop)(struct net_device *dev); void (*pre_request_irq)(struct net_device *dev, int irq); @@ -100,10 +120,6 @@ struct fs_enet_mii_bus { }; }; -int fs_mii_bitbang_init(struct fs_enet_mii_bus *bus); -int fs_mii_fixed_init(struct fs_enet_mii_bus *bus); -int fs_mii_fec_init(struct fs_enet_mii_bus *bus); - struct fs_enet_private { struct device *dev; /* pointer back to the device (must be initialized first) */ spinlock_t lock; /* during all ops except TX pckt processing */ @@ -130,7 +146,8 @@ struct fs_enet_private { struct fs_enet_mii_bus *mii_bus; int interrupt; - int duplex, speed; /* current settings */ + struct phy_device *phydev; + int oldduplex, oldspeed, oldlink; /* current settings */ /* event masks */ u32 ev_napi_rx; /* mask of NAPI rx events */ @@ -168,15 +185,9 @@ struct fs_enet_private { }; /***************************************************************************/ - -int fs_mii_read(struct net_device *dev, int phy_id, int location); -void fs_mii_write(struct net_device *dev, int phy_id, int location, int value); - -void fs_mii_startup(struct net_device *dev); -void fs_mii_shutdown(struct net_device *dev); -void fs_mii_ack_int(struct net_device *dev); - -void fs_mii_link_status_change_check(struct net_device *dev, int init_media); +int fs_enet_mdio_bb_init(void); +int fs_mii_fixed_init(struct fs_enet_mii_bus *bus); +int fs_enet_mdio_fec_init(void); void fs_init_bds(struct net_device *dev); void fs_cleanup_bds(struct net_device *dev); @@ -194,7 +205,6 @@ int fs_enet_platform_init(void); void fs_enet_platform_cleanup(void); /***************************************************************************/ - /* buffer descriptor access macros */ /* access macros */ diff --git a/drivers/net/fs_enet/mac-fcc.c b/drivers/net/fs_enet/mac-fcc.c index 64e20982c1f..1ff2597b849 100644 --- a/drivers/net/fs_enet/mac-fcc.c +++ b/drivers/net/fs_enet/mac-fcc.c @@ -34,6 +34,7 @@ #include #include #include +#include #include #include @@ -122,22 +123,32 @@ static int do_pd_setup(struct fs_enet_private *fep) /* Attach the memory for the FCC Parameter RAM */ r = platform_get_resource_byname(pdev, IORESOURCE_MEM, "fcc_pram"); - fep->fcc.ep = (void *)r->start; - + fep->fcc.ep = (void *)ioremap(r->start, r->end - r->start + 1); if (fep->fcc.ep == NULL) return -EINVAL; r = platform_get_resource_byname(pdev, IORESOURCE_MEM, "fcc_regs"); - fep->fcc.fccp = (void *)r->start; - + fep->fcc.fccp = (void *)ioremap(r->start, r->end - r->start + 1); if (fep->fcc.fccp == NULL) return -EINVAL; - fep->fcc.fcccp = (void *)fep->fpi->fcc_regs_c; + if (fep->fpi->fcc_regs_c) { + + fep->fcc.fcccp = (void *)fep->fpi->fcc_regs_c; + } else { + r = platform_get_resource_byname(pdev, IORESOURCE_MEM, + "fcc_regs_c"); + fep->fcc.fcccp = (void *)ioremap(r->start, + r->end - r->start + 1); + } if (fep->fcc.fcccp == NULL) return -EINVAL; + fep->fcc.mem = (void *)fep->fpi->mem_offset; + if (fep->fcc.mem == NULL) + return -EINVAL; + return 0; } @@ -155,8 +166,6 @@ static int setup_data(struct net_device *dev) if ((unsigned int)fep->fcc.idx >= 3) /* max 3 FCCs */ return -EINVAL; - fep->fcc.mem = (void *)fpi->mem_offset; - if (do_pd_setup(fep) != 0) return -EINVAL; @@ -394,7 +403,7 @@ static void restart(struct net_device *dev) /* adjust to speed (for RMII mode) */ if (fpi->use_rmii) { - if (fep->speed == 100) + if (fep->phydev->speed == 100) C8(fcccp, fcc_gfemr, 0x20); else S8(fcccp, fcc_gfemr, 0x20); @@ -420,7 +429,7 @@ static void restart(struct net_device *dev) S32(fccp, fcc_fpsmr, FCC_PSMR_RMII); /* adjust to duplex mode */ - if (fep->duplex) + if (fep->phydev->duplex) S32(fccp, fcc_fpsmr, FCC_PSMR_FDE | FCC_PSMR_LPB); else C32(fccp, fcc_fpsmr, FCC_PSMR_FDE | FCC_PSMR_LPB); @@ -486,7 +495,10 @@ static void rx_bd_done(struct net_device *dev) static void tx_kickstart(struct net_device *dev) { - /* nothing */ + struct fs_enet_private *fep = netdev_priv(dev); + fcc_t *fccp = fep->fcc.fccp; + + S32(fccp, fcc_ftodr, 0x80); } static u32 get_int_events(struct net_device *dev) diff --git a/drivers/net/fs_enet/mac-fec.c b/drivers/net/fs_enet/mac-fec.c index e0954707752..c2c5fd419bd 100644 --- a/drivers/net/fs_enet/mac-fec.c +++ b/drivers/net/fs_enet/mac-fec.c @@ -46,6 +46,7 @@ #endif #include "fs_enet.h" +#include "fec.h" /*************************************************/ @@ -75,50 +76,8 @@ /* clear bits */ #define FC(_fecp, _reg, _v) FW(_fecp, _reg, FR(_fecp, _reg) & ~(_v)) - -/* CRC polynomium used by the FEC for the multicast group filtering */ -#define FEC_CRC_POLY 0x04C11DB7 - -#define FEC_MAX_MULTICAST_ADDRS 64 - -/* Interrupt events/masks. -*/ -#define FEC_ENET_HBERR 0x80000000U /* Heartbeat error */ -#define FEC_ENET_BABR 0x40000000U /* Babbling receiver */ -#define FEC_ENET_BABT 0x20000000U /* Babbling transmitter */ -#define FEC_ENET_GRA 0x10000000U /* Graceful stop complete */ -#define FEC_ENET_TXF 0x08000000U /* Full frame transmitted */ -#define FEC_ENET_TXB 0x04000000U /* A buffer was transmitted */ -#define FEC_ENET_RXF 0x02000000U /* Full frame received */ -#define FEC_ENET_RXB 0x01000000U /* A buffer was received */ -#define FEC_ENET_MII 0x00800000U /* MII interrupt */ -#define FEC_ENET_EBERR 0x00400000U /* SDMA bus error */ - -#define FEC_ECNTRL_PINMUX 0x00000004 -#define FEC_ECNTRL_ETHER_EN 0x00000002 -#define FEC_ECNTRL_RESET 0x00000001 - -#define FEC_RCNTRL_BC_REJ 0x00000010 -#define FEC_RCNTRL_PROM 0x00000008 -#define FEC_RCNTRL_MII_MODE 0x00000004 -#define FEC_RCNTRL_DRT 0x00000002 -#define FEC_RCNTRL_LOOP 0x00000001 - -#define FEC_TCNTRL_FDEN 0x00000004 -#define FEC_TCNTRL_HBC 0x00000002 -#define FEC_TCNTRL_GTS 0x00000001 - - -/* Make MII read/write commands for the FEC. -*/ -#define mk_mii_read(REG) (0x60020000 | ((REG & 0x1f) << 18)) -#define mk_mii_write(REG, VAL) (0x50020000 | ((REG & 0x1f) << 18) | (VAL & 0xffff)) -#define mk_mii_end 0 - -#define FEC_MII_LOOPS 10000 - /* - * Delay to wait for FEC reset command to complete (in us) + * Delay to wait for FEC reset command to complete (in us) */ #define FEC_RESET_DELAY 50 @@ -303,13 +262,15 @@ static void restart(struct net_device *dev) int r; u32 addrhi, addrlo; + struct mii_bus* mii = fep->phydev->bus; + struct fec_info* fec_inf = mii->priv; + r = whack_reset(fep->fec.fecp); if (r != 0) printk(KERN_ERR DRV_MODULE_NAME ": %s FEC Reset FAILED!\n", dev->name); - /* - * Set station address. + * Set station address. */ addrhi = ((u32) dev->dev_addr[0] << 24) | ((u32) dev->dev_addr[1] << 16) | @@ -350,12 +311,12 @@ static void restart(struct net_device *dev) FW(fecp, fun_code, 0x78000000); /* - * Set MII speed. + * Set MII speed. */ - FW(fecp, mii_speed, fep->mii_bus->fec.mii_speed); + FW(fecp, mii_speed, fec_inf->mii_speed); /* - * Clear any outstanding interrupt. + * Clear any outstanding interrupt. */ FW(fecp, ievent, 0xffc0); FW(fecp, ivec, (fep->interrupt / 2) << 29); @@ -390,11 +351,12 @@ static void restart(struct net_device *dev) } #endif + FW(fecp, r_cntrl, FEC_RCNTRL_MII_MODE); /* MII enable */ /* - * adjust to duplex mode + * adjust to duplex mode */ - if (fep->duplex) { + if (fep->phydev->duplex) { FC(fecp, r_cntrl, FEC_RCNTRL_DRT); FS(fecp, x_cntrl, FEC_TCNTRL_FDEN); /* FD enable */ } else { @@ -418,9 +380,11 @@ static void restart(struct net_device *dev) static void stop(struct net_device *dev) { struct fs_enet_private *fep = netdev_priv(dev); + const struct fs_platform_info *fpi = fep->fpi; fec_t *fecp = fep->fec.fecp; - struct fs_enet_mii_bus *bus = fep->mii_bus; - const struct fs_mii_bus_info *bi = bus->bus_info; + + struct fec_info* feci= fep->phydev->bus->priv; + int i; if ((FR(fecp, ecntrl) & FEC_ECNTRL_ETHER_EN) == 0) @@ -444,11 +408,11 @@ static void stop(struct net_device *dev) fs_cleanup_bds(dev); /* shut down FEC1? that's where the mii bus is */ - if (fep->fec.idx == 0 && bus->refs > 1 && bi->method == fsmii_fec) { + if (fpi->has_phy) { FS(fecp, r_cntrl, FEC_RCNTRL_MII_MODE); /* MII enable */ FS(fecp, ecntrl, FEC_ECNTRL_PINMUX | FEC_ECNTRL_ETHER_EN); FW(fecp, ievent, FEC_ENET_MII); - FW(fecp, mii_speed, bus->fec.mii_speed); + FW(fecp, mii_speed, feci->mii_speed); } } @@ -583,73 +547,3 @@ const struct fs_ops fs_fec_ops = { .free_bd = free_bd, }; -/***********************************************************************/ - -static int mii_read(struct fs_enet_mii_bus *bus, int phy_id, int location) -{ - fec_t *fecp = bus->fec.fecp; - int i, ret = -1; - - if ((FR(fecp, r_cntrl) & FEC_RCNTRL_MII_MODE) == 0) - BUG(); - - /* Add PHY address to register command. */ - FW(fecp, mii_data, (phy_id << 23) | mk_mii_read(location)); - - for (i = 0; i < FEC_MII_LOOPS; i++) - if ((FR(fecp, ievent) & FEC_ENET_MII) != 0) - break; - - if (i < FEC_MII_LOOPS) { - FW(fecp, ievent, FEC_ENET_MII); - ret = FR(fecp, mii_data) & 0xffff; - } - - return ret; -} - -static void mii_write(struct fs_enet_mii_bus *bus, int phy_id, int location, int value) -{ - fec_t *fecp = bus->fec.fecp; - int i; - - /* this must never happen */ - if ((FR(fecp, r_cntrl) & FEC_RCNTRL_MII_MODE) == 0) - BUG(); - - /* Add PHY address to register command. */ - FW(fecp, mii_data, (phy_id << 23) | mk_mii_write(location, value)); - - for (i = 0; i < FEC_MII_LOOPS; i++) - if ((FR(fecp, ievent) & FEC_ENET_MII) != 0) - break; - - if (i < FEC_MII_LOOPS) - FW(fecp, ievent, FEC_ENET_MII); -} - -int fs_mii_fec_init(struct fs_enet_mii_bus *bus) -{ - bd_t *bd = (bd_t *)__res; - const struct fs_mii_bus_info *bi = bus->bus_info; - fec_t *fecp; - - if (bi->id != 0) - return -1; - - bus->fec.fecp = &((immap_t *)fs_enet_immap)->im_cpm.cp_fec; - bus->fec.mii_speed = ((((bd->bi_intfreq + 4999999) / 2500000) / 2) - & 0x3F) << 1; - - fecp = bus->fec.fecp; - - FS(fecp, r_cntrl, FEC_RCNTRL_MII_MODE); /* MII enable */ - FS(fecp, ecntrl, FEC_ECNTRL_PINMUX | FEC_ECNTRL_ETHER_EN); - FW(fecp, ievent, FEC_ENET_MII); - FW(fecp, mii_speed, bus->fec.mii_speed); - - bus->mii_read = mii_read; - bus->mii_write = mii_write; - - return 0; -} diff --git a/drivers/net/fs_enet/mac-scc.c b/drivers/net/fs_enet/mac-scc.c index eaa24fab645..95ec5872c50 100644 --- a/drivers/net/fs_enet/mac-scc.c +++ b/drivers/net/fs_enet/mac-scc.c @@ -369,7 +369,7 @@ static void restart(struct net_device *dev) W16(sccp, scc_psmr, SCC_PSMR_ENCRC | SCC_PSMR_NIB22); /* Set full duplex mode if needed */ - if (fep->duplex) + if (fep->phydev->duplex) S16(sccp, scc_psmr, SCC_PSMR_LPB | SCC_PSMR_FDE); S32(sccp, scc_gsmrl, SCC_GSMRL_ENR | SCC_GSMRL_ENT); @@ -500,6 +500,8 @@ static void tx_restart(struct net_device *dev) scc_cr_cmd(fep, CPM_CR_RESTART_TX); } + + /*************************************************************************/ const struct fs_ops fs_scc_ops = { diff --git a/drivers/net/fs_enet/mii-bitbang.c b/drivers/net/fs_enet/mii-bitbang.c index 48f9cf83ab6..0b9b8b5c847 100644 --- a/drivers/net/fs_enet/mii-bitbang.c +++ b/drivers/net/fs_enet/mii-bitbang.c @@ -33,6 +33,7 @@ #include #include #include +#include #include #include @@ -40,129 +41,25 @@ #include "fs_enet.h" -#ifdef CONFIG_8xx -static int bitbang_prep_bit(u8 **dirp, u8 **datp, u8 *mskp, int port, int bit) +static int bitbang_prep_bit(u8 **datp, u8 *mskp, + struct fs_mii_bit *mii_bit) { - immap_t *im = (immap_t *)fs_enet_immap; - void *dir, *dat, *ppar; + void *dat; int adv; u8 msk; - switch (port) { - case fsiop_porta: - dir = &im->im_ioport.iop_padir; - dat = &im->im_ioport.iop_padat; - ppar = &im->im_ioport.iop_papar; - break; - - case fsiop_portb: - dir = &im->im_cpm.cp_pbdir; - dat = &im->im_cpm.cp_pbdat; - ppar = &im->im_cpm.cp_pbpar; - break; - - case fsiop_portc: - dir = &im->im_ioport.iop_pcdir; - dat = &im->im_ioport.iop_pcdat; - ppar = &im->im_ioport.iop_pcpar; - break; - - case fsiop_portd: - dir = &im->im_ioport.iop_pddir; - dat = &im->im_ioport.iop_pddat; - ppar = &im->im_ioport.iop_pdpar; - break; - - case fsiop_porte: - dir = &im->im_cpm.cp_pedir; - dat = &im->im_cpm.cp_pedat; - ppar = &im->im_cpm.cp_pepar; - break; - - default: - printk(KERN_ERR DRV_MODULE_NAME - "Illegal port value %d!\n", port); - return -EINVAL; - } - - adv = bit >> 3; - dir = (char *)dir + adv; - dat = (char *)dat + adv; - ppar = (char *)ppar + adv; - - msk = 1 << (7 - (bit & 7)); - if ((in_8(ppar) & msk) != 0) { - printk(KERN_ERR DRV_MODULE_NAME - "pin %d on port %d is not general purpose!\n", bit, port); - return -EINVAL; - } - - *dirp = dir; - *datp = dat; - *mskp = msk; - - return 0; -} -#endif - -#ifdef CONFIG_8260 -static int bitbang_prep_bit(u8 **dirp, u8 **datp, u8 *mskp, int port, int bit) -{ - iop_cpm2_t *io = &((cpm2_map_t *)fs_enet_immap)->im_ioport; - void *dir, *dat, *ppar; - int adv; - u8 msk; - - switch (port) { - case fsiop_porta: - dir = &io->iop_pdira; - dat = &io->iop_pdata; - ppar = &io->iop_ppara; - break; - - case fsiop_portb: - dir = &io->iop_pdirb; - dat = &io->iop_pdatb; - ppar = &io->iop_pparb; - break; - - case fsiop_portc: - dir = &io->iop_pdirc; - dat = &io->iop_pdatc; - ppar = &io->iop_pparc; - break; - - case fsiop_portd: - dir = &io->iop_pdird; - dat = &io->iop_pdatd; - ppar = &io->iop_ppard; - break; - - default: - printk(KERN_ERR DRV_MODULE_NAME - "Illegal port value %d!\n", port); - return -EINVAL; - } + dat = (void*) mii_bit->offset; - adv = bit >> 3; - dir = (char *)dir + adv; + adv = mii_bit->bit >> 3; dat = (char *)dat + adv; - ppar = (char *)ppar + adv; - msk = 1 << (7 - (bit & 7)); - if ((in_8(ppar) & msk) != 0) { - printk(KERN_ERR DRV_MODULE_NAME - "pin %d on port %d is not general purpose!\n", bit, port); - return -EINVAL; - } + msk = 1 << (7 - (mii_bit->bit & 7)); - *dirp = dir; *datp = dat; *mskp = msk; return 0; } -#endif static inline void bb_set(u8 *p, u8 m) { @@ -179,44 +76,44 @@ static inline int bb_read(u8 *p, u8 m) return (in_8(p) & m) != 0; } -static inline void mdio_active(struct fs_enet_mii_bus *bus) +static inline void mdio_active(struct bb_info *bitbang) { - bb_set(bus->bitbang.mdio_dir, bus->bitbang.mdio_msk); + bb_set(bitbang->mdio_dir, bitbang->mdio_dir_msk); } -static inline void mdio_tristate(struct fs_enet_mii_bus *bus) +static inline void mdio_tristate(struct bb_info *bitbang ) { - bb_clr(bus->bitbang.mdio_dir, bus->bitbang.mdio_msk); + bb_clr(bitbang->mdio_dir, bitbang->mdio_dir_msk); } -static inline int mdio_read(struct fs_enet_mii_bus *bus) +static inline int mdio_read(struct bb_info *bitbang ) { - return bb_read(bus->bitbang.mdio_dat, bus->bitbang.mdio_msk); + return bb_read(bitbang->mdio_dat, bitbang->mdio_dat_msk); } -static inline void mdio(struct fs_enet_mii_bus *bus, int what) +static inline void mdio(struct bb_info *bitbang , int what) { if (what) - bb_set(bus->bitbang.mdio_dat, bus->bitbang.mdio_msk); + bb_set(bitbang->mdio_dat, bitbang->mdio_dat_msk); else - bb_clr(bus->bitbang.mdio_dat, bus->bitbang.mdio_msk); + bb_clr(bitbang->mdio_dat, bitbang->mdio_dat_msk); } -static inline void mdc(struct fs_enet_mii_bus *bus, int what) +static inline void mdc(struct bb_info *bitbang , int what) { if (what) - bb_set(bus->bitbang.mdc_dat, bus->bitbang.mdc_msk); + bb_set(bitbang->mdc_dat, bitbang->mdc_msk); else - bb_clr(bus->bitbang.mdc_dat, bus->bitbang.mdc_msk); + bb_clr(bitbang->mdc_dat, bitbang->mdc_msk); } -static inline void mii_delay(struct fs_enet_mii_bus *bus) +static inline void mii_delay(struct bb_info *bitbang ) { - udelay(bus->bus_info->i.bitbang.delay); + udelay(bitbang->delay); } /* Utility to send the preamble, address, and register (common to read and write). */ -static void bitbang_pre(struct fs_enet_mii_bus *bus, int read, u8 addr, u8 reg) +static void bitbang_pre(struct bb_info *bitbang , int read, u8 addr, u8 reg) { int j; @@ -228,177 +125,284 @@ static void bitbang_pre(struct fs_enet_mii_bus *bus, int read, u8 addr, u8 reg) * but it is safer and will be much more robust. */ - mdio_active(bus); - mdio(bus, 1); + mdio_active(bitbang); + mdio(bitbang, 1); for (j = 0; j < 32; j++) { - mdc(bus, 0); - mii_delay(bus); - mdc(bus, 1); - mii_delay(bus); + mdc(bitbang, 0); + mii_delay(bitbang); + mdc(bitbang, 1); + mii_delay(bitbang); } /* send the start bit (01) and the read opcode (10) or write (10) */ - mdc(bus, 0); - mdio(bus, 0); - mii_delay(bus); - mdc(bus, 1); - mii_delay(bus); - mdc(bus, 0); - mdio(bus, 1); - mii_delay(bus); - mdc(bus, 1); - mii_delay(bus); - mdc(bus, 0); - mdio(bus, read); - mii_delay(bus); - mdc(bus, 1); - mii_delay(bus); - mdc(bus, 0); - mdio(bus, !read); - mii_delay(bus); - mdc(bus, 1); - mii_delay(bus); + mdc(bitbang, 0); + mdio(bitbang, 0); + mii_delay(bitbang); + mdc(bitbang, 1); + mii_delay(bitbang); + mdc(bitbang, 0); + mdio(bitbang, 1); + mii_delay(bitbang); + mdc(bitbang, 1); + mii_delay(bitbang); + mdc(bitbang, 0); + mdio(bitbang, read); + mii_delay(bitbang); + mdc(bitbang, 1); + mii_delay(bitbang); + mdc(bitbang, 0); + mdio(bitbang, !read); + mii_delay(bitbang); + mdc(bitbang, 1); + mii_delay(bitbang); /* send the PHY address */ for (j = 0; j < 5; j++) { - mdc(bus, 0); - mdio(bus, (addr & 0x10) != 0); - mii_delay(bus); - mdc(bus, 1); - mii_delay(bus); + mdc(bitbang, 0); + mdio(bitbang, (addr & 0x10) != 0); + mii_delay(bitbang); + mdc(bitbang, 1); + mii_delay(bitbang); addr <<= 1; } /* send the register address */ for (j = 0; j < 5; j++) { - mdc(bus, 0); - mdio(bus, (reg & 0x10) != 0); - mii_delay(bus); - mdc(bus, 1); - mii_delay(bus); + mdc(bitbang, 0); + mdio(bitbang, (reg & 0x10) != 0); + mii_delay(bitbang); + mdc(bitbang, 1); + mii_delay(bitbang); reg <<= 1; } } -static int mii_read(struct fs_enet_mii_bus *bus, int phy_id, int location) +static int fs_enet_mii_bb_read(struct mii_bus *bus , int phy_id, int location) { u16 rdreg; int ret, j; u8 addr = phy_id & 0xff; u8 reg = location & 0xff; + struct bb_info* bitbang = bus->priv; - bitbang_pre(bus, 1, addr, reg); + bitbang_pre(bitbang, 1, addr, reg); /* tri-state our MDIO I/O pin so we can read */ - mdc(bus, 0); - mdio_tristate(bus); - mii_delay(bus); - mdc(bus, 1); - mii_delay(bus); + mdc(bitbang, 0); + mdio_tristate(bitbang); + mii_delay(bitbang); + mdc(bitbang, 1); + mii_delay(bitbang); /* check the turnaround bit: the PHY should be driving it to zero */ - if (mdio_read(bus) != 0) { + if (mdio_read(bitbang) != 0) { /* PHY didn't drive TA low */ for (j = 0; j < 32; j++) { - mdc(bus, 0); - mii_delay(bus); - mdc(bus, 1); - mii_delay(bus); + mdc(bitbang, 0); + mii_delay(bitbang); + mdc(bitbang, 1); + mii_delay(bitbang); } ret = -1; goto out; } - mdc(bus, 0); - mii_delay(bus); + mdc(bitbang, 0); + mii_delay(bitbang); /* read 16 bits of register data, MSB first */ rdreg = 0; for (j = 0; j < 16; j++) { - mdc(bus, 1); - mii_delay(bus); + mdc(bitbang, 1); + mii_delay(bitbang); rdreg <<= 1; - rdreg |= mdio_read(bus); - mdc(bus, 0); - mii_delay(bus); + rdreg |= mdio_read(bitbang); + mdc(bitbang, 0); + mii_delay(bitbang); } - mdc(bus, 1); - mii_delay(bus); - mdc(bus, 0); - mii_delay(bus); - mdc(bus, 1); - mii_delay(bus); + mdc(bitbang, 1); + mii_delay(bitbang); + mdc(bitbang, 0); + mii_delay(bitbang); + mdc(bitbang, 1); + mii_delay(bitbang); ret = rdreg; out: return ret; } -static void mii_write(struct fs_enet_mii_bus *bus, int phy_id, int location, int val) +static int fs_enet_mii_bb_write(struct mii_bus *bus, int phy_id, int location, u16 val) { int j; + struct bb_info* bitbang = bus->priv; + u8 addr = phy_id & 0xff; u8 reg = location & 0xff; u16 value = val & 0xffff; - bitbang_pre(bus, 0, addr, reg); + bitbang_pre(bitbang, 0, addr, reg); /* send the turnaround (10) */ - mdc(bus, 0); - mdio(bus, 1); - mii_delay(bus); - mdc(bus, 1); - mii_delay(bus); - mdc(bus, 0); - mdio(bus, 0); - mii_delay(bus); - mdc(bus, 1); - mii_delay(bus); + mdc(bitbang, 0); + mdio(bitbang, 1); + mii_delay(bitbang); + mdc(bitbang, 1); + mii_delay(bitbang); + mdc(bitbang, 0); + mdio(bitbang, 0); + mii_delay(bitbang); + mdc(bitbang, 1); + mii_delay(bitbang); /* write 16 bits of register data, MSB first */ for (j = 0; j < 16; j++) { - mdc(bus, 0); - mdio(bus, (value & 0x8000) != 0); - mii_delay(bus); - mdc(bus, 1); - mii_delay(bus); + mdc(bitbang, 0); + mdio(bitbang, (value & 0x8000) != 0); + mii_delay(bitbang); + mdc(bitbang, 1); + mii_delay(bitbang); value <<= 1; } /* * Tri-state the MDIO line. */ - mdio_tristate(bus); - mdc(bus, 0); - mii_delay(bus); - mdc(bus, 1); - mii_delay(bus); + mdio_tristate(bitbang); + mdc(bitbang, 0); + mii_delay(bitbang); + mdc(bitbang, 1); + mii_delay(bitbang); + return 0; } -int fs_mii_bitbang_init(struct fs_enet_mii_bus *bus) +static int fs_enet_mii_bb_reset(struct mii_bus *bus) +{ + /*nothing here - dunno how to reset it*/ + return 0; +} + +static int fs_mii_bitbang_init(struct bb_info *bitbang, struct fs_mii_bb_platform_info* fmpi) { - const struct fs_mii_bus_info *bi = bus->bus_info; int r; - r = bitbang_prep_bit(&bus->bitbang.mdio_dir, - &bus->bitbang.mdio_dat, - &bus->bitbang.mdio_msk, - bi->i.bitbang.mdio_port, - bi->i.bitbang.mdio_bit); + bitbang->delay = fmpi->delay; + + r = bitbang_prep_bit(&bitbang->mdio_dir, + &bitbang->mdio_dir_msk, + &fmpi->mdio_dir); if (r != 0) return r; - r = bitbang_prep_bit(&bus->bitbang.mdc_dir, - &bus->bitbang.mdc_dat, - &bus->bitbang.mdc_msk, - bi->i.bitbang.mdc_port, - bi->i.bitbang.mdc_bit); + r = bitbang_prep_bit(&bitbang->mdio_dat, + &bitbang->mdio_dat_msk, + &fmpi->mdio_dat); if (r != 0) return r; - bus->mii_read = mii_read; - bus->mii_write = mii_write; + r = bitbang_prep_bit(&bitbang->mdc_dat, + &bitbang->mdc_msk, + &fmpi->mdc_dat); + if (r != 0) + return r; return 0; } + + +static int __devinit fs_enet_mdio_probe(struct device *dev) +{ + struct platform_device *pdev = to_platform_device(dev); + struct fs_mii_bb_platform_info *pdata; + struct mii_bus *new_bus; + struct bb_info *bitbang; + int err = 0; + + if (NULL == dev) + return -EINVAL; + + new_bus = kzalloc(sizeof(struct mii_bus), GFP_KERNEL); + + if (NULL == new_bus) + return -ENOMEM; + + bitbang = kzalloc(sizeof(struct bb_info), GFP_KERNEL); + + if (NULL == bitbang) + return -ENOMEM; + + new_bus->name = "BB MII Bus", + new_bus->read = &fs_enet_mii_bb_read, + new_bus->write = &fs_enet_mii_bb_write, + new_bus->reset = &fs_enet_mii_bb_reset, + new_bus->id = pdev->id; + + new_bus->phy_mask = ~0x9; + pdata = (struct fs_mii_bb_platform_info *)pdev->dev.platform_data; + + if (NULL == pdata) { + printk(KERN_ERR "gfar mdio %d: Missing platform data!\n", pdev->id); + return -ENODEV; + } + + /*set up workspace*/ + fs_mii_bitbang_init(bitbang, pdata); + + new_bus->priv = bitbang; + + new_bus->irq = pdata->irq; + + new_bus->dev = dev; + dev_set_drvdata(dev, new_bus); + + err = mdiobus_register(new_bus); + + if (0 != err) { + printk (KERN_ERR "%s: Cannot register as MDIO bus\n", + new_bus->name); + goto bus_register_fail; + } + + return 0; + +bus_register_fail: + kfree(bitbang); + kfree(new_bus); + + return err; +} + + +static int fs_enet_mdio_remove(struct device *dev) +{ + struct mii_bus *bus = dev_get_drvdata(dev); + + mdiobus_unregister(bus); + + dev_set_drvdata(dev, NULL); + + iounmap((void *) (&bus->priv)); + bus->priv = NULL; + kfree(bus); + + return 0; +} + +static struct device_driver fs_enet_bb_mdio_driver = { + .name = "fsl-bb-mdio", + .bus = &platform_bus_type, + .probe = fs_enet_mdio_probe, + .remove = fs_enet_mdio_remove, +}; + +int fs_enet_mdio_bb_init(void) +{ + return driver_register(&fs_enet_bb_mdio_driver); +} + +void fs_enet_mdio_bb_exit(void) +{ + driver_unregister(&fs_enet_bb_mdio_driver); +} + diff --git a/drivers/net/fs_enet/mii-fec.c b/drivers/net/fs_enet/mii-fec.c new file mode 100644 index 00000000000..1328e10caa3 --- /dev/null +++ b/drivers/net/fs_enet/mii-fec.c @@ -0,0 +1,243 @@ +/* + * Combined Ethernet driver for Motorola MPC8xx and MPC82xx. + * + * Copyright (c) 2003 Intracom S.A. + * by Pantelis Antoniou + * + * 2005 (c) MontaVista Software, Inc. + * Vitaly Bordug + * + * This file is licensed under the terms of the GNU General Public License + * version 2. This program is licensed "as is" without any warranty of any + * kind, whether express or implied. + */ + + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include + +#include "fs_enet.h" +#include "fec.h" + +/* Make MII read/write commands for the FEC. +*/ +#define mk_mii_read(REG) (0x60020000 | ((REG & 0x1f) << 18)) +#define mk_mii_write(REG, VAL) (0x50020000 | ((REG & 0x1f) << 18) | (VAL & 0xffff)) +#define mk_mii_end 0 + +#define FEC_MII_LOOPS 10000 + +static int match_has_phy (struct device *dev, void* data) +{ + struct platform_device* pdev = container_of(dev, struct platform_device, dev); + struct fs_platform_info* fpi; + if(strcmp(pdev->name, (char*)data)) + { + return 0; + } + + fpi = pdev->dev.platform_data; + if((fpi)&&(fpi->has_phy)) + return 1; + return 0; +} + +static int fs_mii_fec_init(struct fec_info* fec, struct fs_mii_fec_platform_info *fmpi) +{ + struct resource *r; + fec_t *fecp; + char* name = "fsl-cpm-fec"; + + /* we need fec in order to be useful */ + struct platform_device *fec_pdev = + container_of(bus_find_device(&platform_bus_type, NULL, name, match_has_phy), + struct platform_device, dev); + + if(fec_pdev == NULL) { + printk(KERN_ERR"Unable to find PHY for %s", name); + return -ENODEV; + } + + r = platform_get_resource_byname(fec_pdev, IORESOURCE_MEM, "regs"); + + fec->fecp = fecp = (fec_t*)ioremap(r->start,sizeof(fec_t)); + fec->mii_speed = fmpi->mii_speed; + + setbits32(&fecp->fec_r_cntrl, FEC_RCNTRL_MII_MODE); /* MII enable */ + setbits32(&fecp->fec_ecntrl, FEC_ECNTRL_PINMUX | FEC_ECNTRL_ETHER_EN); + out_be32(&fecp->fec_ievent, FEC_ENET_MII); + out_be32(&fecp->fec_mii_speed, fec->mii_speed); + + return 0; +} + +static int fs_enet_fec_mii_read(struct mii_bus *bus , int phy_id, int location) +{ + struct fec_info* fec = bus->priv; + fec_t *fecp = fec->fecp; + int i, ret = -1; + + if ((in_be32(&fecp->fec_r_cntrl) & FEC_RCNTRL_MII_MODE) == 0) + BUG(); + + /* Add PHY address to register command. */ + out_be32(&fecp->fec_mii_data, (phy_id << 23) | mk_mii_read(location)); + + for (i = 0; i < FEC_MII_LOOPS; i++) + if ((in_be32(&fecp->fec_ievent) & FEC_ENET_MII) != 0) + break; + + if (i < FEC_MII_LOOPS) { + out_be32(&fecp->fec_ievent, FEC_ENET_MII); + ret = in_be32(&fecp->fec_mii_data) & 0xffff; + } + + return ret; + +} + +static int fs_enet_fec_mii_write(struct mii_bus *bus, int phy_id, int location, u16 val) +{ + struct fec_info* fec = bus->priv; + fec_t *fecp = fec->fecp; + int i; + + /* this must never happen */ + if ((in_be32(&fecp->fec_r_cntrl) & FEC_RCNTRL_MII_MODE) == 0) + BUG(); + + /* Add PHY address to register command. */ + out_be32(&fecp->fec_mii_data, (phy_id << 23) | mk_mii_write(location, val)); + + for (i = 0; i < FEC_MII_LOOPS; i++) + if ((in_be32(&fecp->fec_ievent) & FEC_ENET_MII) != 0) + break; + + if (i < FEC_MII_LOOPS) + out_be32(&fecp->fec_ievent, FEC_ENET_MII); + + return 0; + +} + +static int fs_enet_fec_mii_reset(struct mii_bus *bus) +{ + /* nothing here - for now */ + return 0; +} + +static int __devinit fs_enet_fec_mdio_probe(struct device *dev) +{ + struct platform_device *pdev = to_platform_device(dev); + struct fs_mii_fec_platform_info *pdata; + struct mii_bus *new_bus; + struct fec_info *fec; + int err = 0; + if (NULL == dev) + return -EINVAL; + new_bus = kzalloc(sizeof(struct mii_bus), GFP_KERNEL); + + if (NULL == new_bus) + return -ENOMEM; + + fec = kzalloc(sizeof(struct fec_info), GFP_KERNEL); + + if (NULL == fec) + return -ENOMEM; + + new_bus->name = "FEC MII Bus", + new_bus->read = &fs_enet_fec_mii_read, + new_bus->write = &fs_enet_fec_mii_write, + new_bus->reset = &fs_enet_fec_mii_reset, + new_bus->id = pdev->id; + + pdata = (struct fs_mii_fec_platform_info *)pdev->dev.platform_data; + + if (NULL == pdata) { + printk(KERN_ERR "fs_enet FEC mdio %d: Missing platform data!\n", pdev->id); + return -ENODEV; + } + + /*set up workspace*/ + + fs_mii_fec_init(fec, pdata); + new_bus->priv = fec; + + new_bus->irq = pdata->irq; + + new_bus->dev = dev; + dev_set_drvdata(dev, new_bus); + + err = mdiobus_register(new_bus); + + if (0 != err) { + printk (KERN_ERR "%s: Cannot register as MDIO bus\n", + new_bus->name); + goto bus_register_fail; + } + + return 0; + +bus_register_fail: + kfree(new_bus); + + return err; +} + + +static int fs_enet_fec_mdio_remove(struct device *dev) +{ + struct mii_bus *bus = dev_get_drvdata(dev); + + mdiobus_unregister(bus); + + dev_set_drvdata(dev, NULL); + kfree(bus->priv); + + bus->priv = NULL; + kfree(bus); + + return 0; +} + +static struct device_driver fs_enet_fec_mdio_driver = { + .name = "fsl-cpm-fec-mdio", + .bus = &platform_bus_type, + .probe = fs_enet_fec_mdio_probe, + .remove = fs_enet_fec_mdio_remove, +}; + +int fs_enet_mdio_fec_init(void) +{ + return driver_register(&fs_enet_fec_mdio_driver); +} + +void fs_enet_mdio_fec_exit(void) +{ + driver_unregister(&fs_enet_fec_mdio_driver); +} + diff --git a/drivers/net/fs_enet/mii-fixed.c b/drivers/net/fs_enet/mii-fixed.c deleted file mode 100644 index ae4a9c3bb39..00000000000 --- a/drivers/net/fs_enet/mii-fixed.c +++ /dev/null @@ -1,91 +0,0 @@ -/* - * Combined Ethernet driver for Motorola MPC8xx and MPC82xx. - * - * Copyright (c) 2003 Intracom S.A. - * by Pantelis Antoniou - * - * 2005 (c) MontaVista Software, Inc. - * Vitaly Bordug - * - * This file is licensed under the terms of the GNU General Public License - * version 2. This program is licensed "as is" without any warranty of any - * kind, whether express or implied. - */ - - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include -#include - -#include "fs_enet.h" - -static const u16 mii_regs[7] = { - 0x3100, - 0x786d, - 0x0fff, - 0x0fff, - 0x01e1, - 0x45e1, - 0x0003, -}; - -static int mii_read(struct fs_enet_mii_bus *bus, int phy_id, int location) -{ - int ret = 0; - - if ((unsigned int)location >= ARRAY_SIZE(mii_regs)) - return -1; - - if (location != 5) - ret = mii_regs[location]; - else - ret = bus->fixed.lpa; - - return ret; -} - -static void mii_write(struct fs_enet_mii_bus *bus, int phy_id, int location, int val) -{ - /* do nothing */ -} - -int fs_mii_fixed_init(struct fs_enet_mii_bus *bus) -{ - const struct fs_mii_bus_info *bi = bus->bus_info; - - bus->fixed.lpa = 0x45e1; /* default 100Mb, full duplex */ - - /* if speed is fixed at 10Mb, remove 100Mb modes */ - if (bi->i.fixed.speed == 10) - bus->fixed.lpa &= ~LPA_100; - - /* if duplex is half, remove full duplex modes */ - if (bi->i.fixed.duplex == 0) - bus->fixed.lpa &= ~LPA_DUPLEX; - - bus->mii_read = mii_read; - bus->mii_write = mii_write; - - return 0; -} -- cgit v1.2.3-70-g09d2 From a76b044af147135b5fb7570aba35d4908f143cc9 Mon Sep 17 00:00:00 2001 From: Krzysztof Halasa Date: Wed, 16 Aug 2006 01:52:23 +0200 Subject: [PATCH] WAN: fix C101 card carrier handling Hi, One of my recent changes broke C101 carrier handling, this patch fixes it. Also fixes an old TX underrun checking bug. 2.6.18 material. Please apply. Thanks. Signed-off-by: Krzysztof Halasa Signed-off-by: Jeff Garzik --- drivers/net/wan/c101.c | 9 +++++---- 1 file changed, 5 insertions(+), 4 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/wan/c101.c b/drivers/net/wan/c101.c index 435e91ec462..6b63b350cd5 100644 --- a/drivers/net/wan/c101.c +++ b/drivers/net/wan/c101.c @@ -118,7 +118,7 @@ static inline void openwin(card_t *card, u8 page) static inline void set_carrier(port_t *port) { - if (!sca_in(MSCI1_OFFSET + ST3, port) & ST3_DCD) + if (!(sca_in(MSCI1_OFFSET + ST3, port) & ST3_DCD)) netif_carrier_on(port_to_dev(port)); else netif_carrier_off(port_to_dev(port)); @@ -127,10 +127,10 @@ static inline void set_carrier(port_t *port) static void sca_msci_intr(port_t *port) { - u8 stat = sca_in(MSCI1_OFFSET + ST1, port); /* read MSCI ST1 status */ + u8 stat = sca_in(MSCI0_OFFSET + ST1, port); /* read MSCI ST1 status */ - /* Reset MSCI TX underrun status bit */ - sca_out(stat & ST1_UDRN, MSCI0_OFFSET + ST1, port); + /* Reset MSCI TX underrun and CDCD (ignored) status bit */ + sca_out(stat & (ST1_UDRN | ST1_CDCD), MSCI0_OFFSET + ST1, port); if (stat & ST1_UDRN) { struct net_device_stats *stats = hdlc_stats(port_to_dev(port)); @@ -138,6 +138,7 @@ static void sca_msci_intr(port_t *port) stats->tx_fifo_errors++; } + stat = sca_in(MSCI1_OFFSET + ST1, port); /* read MSCI1 ST1 status */ /* Reset MSCI CDCD status bit - uses ch#2 DCD input */ sca_out(stat & ST1_CDCD, MSCI1_OFFSET + ST1, port); -- cgit v1.2.3-70-g09d2 From 794ccda61c7dc2aa6c66e8ef18a44d865d3c3a7d Mon Sep 17 00:00:00 2001 From: Pavel Roskin Date: Tue, 15 Aug 2006 20:42:20 -0400 Subject: [PATCH] spectrum_cs: Fix incorrect use of pcmcia_dev_present() This bug was introduced during the PCMCIA API conversion and broke spectrum_cs completely. Tracked down by Fredrik Tolf Signed-off-by: Pavel Roskin Signed-off-by: John W. Linville --- drivers/net/wireless/spectrum_cs.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/net') diff --git a/drivers/net/wireless/spectrum_cs.c b/drivers/net/wireless/spectrum_cs.c index 7f78b7801fb..bcc7038130f 100644 --- a/drivers/net/wireless/spectrum_cs.c +++ b/drivers/net/wireless/spectrum_cs.c @@ -242,7 +242,7 @@ spectrum_reset(struct pcmcia_device *link, int idle) u_int save_cor; /* Doing it if hardware is gone is guaranteed crash */ - if (pcmcia_dev_present(link)) + if (!pcmcia_dev_present(link)) return -ENODEV; /* Save original COR value */ -- cgit v1.2.3-70-g09d2 From 9b5cce07648d059a013444116bd0140b047b25a1 Mon Sep 17 00:00:00 2001 From: Pavel Roskin Date: Tue, 15 Aug 2006 21:41:39 -0400 Subject: [PATCH] hostap: Restore antenna selection settings after port reset Intersil firmware 1.7.4 (and possibly others) loses the antenna selection settings when the port is reset. Signed-off-by: David Acker Signed-off-by: Pavel Roskin Signed-off-by: John W. Linville --- drivers/net/wireless/hostap/hostap_hw.c | 3 +++ 1 file changed, 3 insertions(+) (limited to 'drivers/net') diff --git a/drivers/net/wireless/hostap/hostap_hw.c b/drivers/net/wireless/hostap/hostap_hw.c index dafaa5ff5aa..d500012fdc7 100644 --- a/drivers/net/wireless/hostap/hostap_hw.c +++ b/drivers/net/wireless/hostap/hostap_hw.c @@ -1042,6 +1042,9 @@ static int prism2_reset_port(struct net_device *dev) dev->name, local->fragm_threshold); } + /* Some firmwares lose antenna selection settings on reset */ + (void) hostap_set_antsel(local); + return res; } -- cgit v1.2.3-70-g09d2 From cb958186ed543d1a4f074ceb1c783fe8b0908437 Mon Sep 17 00:00:00 2001 From: Eric Sesterhenn Date: Sat, 19 Aug 2006 19:37:57 +0200 Subject: [PATCH] Signedness issue in drivers/net/3c515.c while playing with gcc 4.1 -Wextra warnings, I came across this one: drivers/net/3c515.c:1027: warning: comparison of unsigned expression >= 0 is always true Since i is unsigned the >= 0 check in the for loop is always true, so we might spin there forever unless the if condition triggers. Since i is only used in this loop, this patch changes it to an integer. Signed-off-by: Eric Sesterhenn Signed-off-by: Jeff Garzik --- drivers/net/3c515.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'drivers/net') diff --git a/drivers/net/3c515.c b/drivers/net/3c515.c index 4532b17e40e..aedfddf20cb 100644 --- a/drivers/net/3c515.c +++ b/drivers/net/3c515.c @@ -1003,7 +1003,8 @@ static int corkscrew_start_xmit(struct sk_buff *skb, /* Calculate the next Tx descriptor entry. */ int entry = vp->cur_tx % TX_RING_SIZE; struct boom_tx_desc *prev_entry; - unsigned long flags, i; + unsigned long flags; + int i; if (vp->tx_full) /* No room to transmit with */ return 1; -- cgit v1.2.3-70-g09d2 From 9a469abe9c6bab3ce237ee433541931bbd827faf Mon Sep 17 00:00:00 2001 From: Joerg Ahrens Date: Sun, 20 Aug 2006 21:51:57 +0100 Subject: [PATCH] xirc2ps_cs: Cannot reset card in atomic context I am using a Xircom CEM33 pcmcia NIC which has occasional hardware problems. If the netdev watchdog detects a transmit timeout, do_reset is called which msleeps - this is illegal in atomic context. This patch schedules the timeout handling as a workqueue item. Signed-off-by: Daniel Drake Signed-off-by: Jeff Garzik --- drivers/net/pcmcia/xirc2ps_cs.c | 18 ++++++++++++++---- 1 file changed, 14 insertions(+), 4 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/pcmcia/xirc2ps_cs.c b/drivers/net/pcmcia/xirc2ps_cs.c index 9bae77ce131..4122bb46f5f 100644 --- a/drivers/net/pcmcia/xirc2ps_cs.c +++ b/drivers/net/pcmcia/xirc2ps_cs.c @@ -345,6 +345,7 @@ typedef struct local_info_t { void __iomem *dingo_ccr; /* only used for CEM56 cards */ unsigned last_ptr_value; /* last packets transmitted value */ const char *manf_str; + struct work_struct tx_timeout_task; } local_info_t; /**************** @@ -352,6 +353,7 @@ typedef struct local_info_t { */ static int do_start_xmit(struct sk_buff *skb, struct net_device *dev); static void do_tx_timeout(struct net_device *dev); +static void xirc2ps_tx_timeout_task(void *data); static struct net_device_stats *do_get_stats(struct net_device *dev); static void set_addresses(struct net_device *dev); static void set_multicast_list(struct net_device *dev); @@ -589,6 +591,7 @@ xirc2ps_probe(struct pcmcia_device *link) #ifdef HAVE_TX_TIMEOUT dev->tx_timeout = do_tx_timeout; dev->watchdog_timeo = TX_TIMEOUT; + INIT_WORK(&local->tx_timeout_task, xirc2ps_tx_timeout_task, dev); #endif return xirc2ps_config(link); @@ -1341,17 +1344,24 @@ xirc2ps_interrupt(int irq, void *dev_id, struct pt_regs *regs) /*====================================================================*/ static void -do_tx_timeout(struct net_device *dev) +xirc2ps_tx_timeout_task(void *data) { - local_info_t *lp = netdev_priv(dev); - printk(KERN_NOTICE "%s: transmit timed out\n", dev->name); - lp->stats.tx_errors++; + struct net_device *dev = data; /* reset the card */ do_reset(dev,1); dev->trans_start = jiffies; netif_wake_queue(dev); } +static void +do_tx_timeout(struct net_device *dev) +{ + local_info_t *lp = netdev_priv(dev); + lp->stats.tx_errors++; + printk(KERN_NOTICE "%s: transmit timed out\n", dev->name); + schedule_work(&lp->tx_timeout_task); +} + static int do_start_xmit(struct sk_buff *skb, struct net_device *dev) { -- cgit v1.2.3-70-g09d2 From 8d91626636ed9ce8b742edb52ae48f2faefd5864 Mon Sep 17 00:00:00 2001 From: Don Fry Date: Tue, 22 Aug 2006 10:22:37 -0700 Subject: [PATCH] pcnet32: break in 2.6.18-rc1 identified A change I made for 2.6.17 and another for 2.6.18 do not work on older pcnet32 chips which I do not have access to. If the chip is a 79C970 or 79C965, do not try and suspend or check the link status. I have tested with a 79C970A, 79C971, 79C972, 79C973, 79C975, 79C976, and 79C978. Signed-off-by: Don Fry Signed-off-by: Jeff Garzik --- drivers/net/pcnet32.c | 25 +++++++++++++++++-------- 1 file changed, 17 insertions(+), 8 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/pcnet32.c b/drivers/net/pcnet32.c index 4daafe30335..d50bcb89dd2 100644 --- a/drivers/net/pcnet32.c +++ b/drivers/net/pcnet32.c @@ -202,6 +202,8 @@ static int homepna[MAX_UNITS]; #define CSR15 15 #define PCNET32_MC_FILTER 8 +#define PCNET32_79C970A 0x2621 + /* The PCNET32 Rx and Tx ring descriptors. */ struct pcnet32_rx_head { u32 base; @@ -289,6 +291,7 @@ struct pcnet32_private { /* each bit indicates an available PHY */ u32 phymask; + unsigned short chip_version; /* which variant this is */ }; static int pcnet32_probe_pci(struct pci_dev *, const struct pci_device_id *); @@ -724,9 +727,11 @@ static u32 pcnet32_get_link(struct net_device *dev) spin_lock_irqsave(&lp->lock, flags); if (lp->mii) { r = mii_link_ok(&lp->mii_if); - } else { + } else if (lp->chip_version >= PCNET32_79C970A) { ulong ioaddr = dev->base_addr; /* card base I/O address */ r = (lp->a.read_bcr(ioaddr, 4) != 0xc0); + } else { /* can not detect link on really old chips */ + r = 1; } spin_unlock_irqrestore(&lp->lock, flags); @@ -1091,6 +1096,10 @@ static int pcnet32_suspend(struct net_device *dev, unsigned long *flags, ulong ioaddr = dev->base_addr; int ticks; + /* really old chips have to be stopped. */ + if (lp->chip_version < PCNET32_79C970A) + return 0; + /* set SUSPEND (SPND) - CSR5 bit 0 */ csr5 = a->read_csr(ioaddr, CSR5); a->write_csr(ioaddr, CSR5, csr5 | CSR5_SUSPEND); @@ -1529,6 +1538,7 @@ pcnet32_probe1(unsigned long ioaddr, int shared, struct pci_dev *pdev) lp->mii_if.reg_num_mask = 0x1f; lp->dxsuflo = dxsuflo; lp->mii = mii; + lp->chip_version = chip_version; lp->msg_enable = pcnet32_debug; if ((cards_found >= MAX_UNITS) || (options[cards_found] > sizeof(options_mapping))) @@ -1839,10 +1849,7 @@ static int pcnet32_open(struct net_device *dev) val |= 2; } else if (lp->options & PCNET32_PORT_ASEL) { /* workaround of xSeries250, turn on for 79C975 only */ - i = ((lp->a.read_csr(ioaddr, 88) | - (lp->a. - read_csr(ioaddr, 89) << 16)) >> 12) & 0xffff; - if (i == 0x2627) + if (lp->chip_version == 0x2627) val |= 3; } lp->a.write_bcr(ioaddr, 9, val); @@ -1986,9 +1993,11 @@ static int pcnet32_open(struct net_device *dev) netif_start_queue(dev); - /* Print the link status and start the watchdog */ - pcnet32_check_media(dev, 1); - mod_timer(&(lp->watchdog_timer), PCNET32_WATCHDOG_TIMEOUT); + if (lp->chip_version >= PCNET32_79C970A) { + /* Print the link status and start the watchdog */ + pcnet32_check_media(dev, 1); + mod_timer(&(lp->watchdog_timer), PCNET32_WATCHDOG_TIMEOUT); + } i = 0; while (i++ < 100) -- cgit v1.2.3-70-g09d2 From c5ab964debe92d0ec7af330f350a3433c1b5b61e Mon Sep 17 00:00:00 2001 From: Richard Purdie Date: Tue, 22 Aug 2006 18:55:44 +0100 Subject: [PATCH] spectrum_cs: Fix firmware uploading errors spectrum_cs: Fix the logic so we error when the device is *not* present! This fixes firmware upload failures which prevent the driver from working (the bug is also present in 2.6.17). Signed-off-by: Richard Purdie Signed-off-by: Jeff Garzik --- drivers/net/wireless/spectrum_cs.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/net') diff --git a/drivers/net/wireless/spectrum_cs.c b/drivers/net/wireless/spectrum_cs.c index 7f78b7801fb..bcc7038130f 100644 --- a/drivers/net/wireless/spectrum_cs.c +++ b/drivers/net/wireless/spectrum_cs.c @@ -242,7 +242,7 @@ spectrum_reset(struct pcmcia_device *link, int idle) u_int save_cor; /* Doing it if hardware is gone is guaranteed crash */ - if (pcmcia_dev_present(link)) + if (!pcmcia_dev_present(link)) return -ENODEV; /* Save original COR value */ -- cgit v1.2.3-70-g09d2 From 8fb6f732c389847dece403b7470d6d3d2778804a Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Mon, 28 Aug 2006 22:12:54 -0700 Subject: [E100]: Add module option to ignore bad EEPROM checksums. Several people run into the situation where the E100 EEPROM contents are fine, but the checksum hasn't been set properly. This renders the device useless for them even though it would function correctly. The default is off, which retains the current behavior. Signed-off-by: David S. Miller --- drivers/net/e100.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) (limited to 'drivers/net') diff --git a/drivers/net/e100.c b/drivers/net/e100.c index 91ef5f2fd76..ce850f1078b 100644 --- a/drivers/net/e100.c +++ b/drivers/net/e100.c @@ -173,8 +173,11 @@ MODULE_LICENSE("GPL"); MODULE_VERSION(DRV_VERSION); static int debug = 3; +static int eeprom_bad_csum_allow = 0; module_param(debug, int, 0); +module_param(eeprom_bad_csum_allow, int, 0); MODULE_PARM_DESC(debug, "Debug level (0=none,...,16=all)"); +MODULE_PARM_DESC(eeprom_bad_csum_allow, "Allow bad eeprom checksums"); #define DPRINTK(nlevel, klevel, fmt, args...) \ (void)((NETIF_MSG_##nlevel & nic->msg_enable) && \ printk(KERN_##klevel PFX "%s: %s: " fmt, nic->netdev->name, \ @@ -756,7 +759,8 @@ static int e100_eeprom_load(struct nic *nic) checksum = le16_to_cpu(0xBABA - checksum); if(checksum != nic->eeprom[nic->eeprom_wc - 1]) { DPRINTK(PROBE, ERR, "EEPROM corrupted\n"); - return -EAGAIN; + if (!eeprom_bad_csum_allow) + return -EAGAIN; } return 0; -- cgit v1.2.3-70-g09d2 From ee1377c3eef4238d89b2f99fa4d0bbbad3078b64 Mon Sep 17 00:00:00 2001 From: Stephen Hemminger Date: Tue, 29 Aug 2006 21:18:45 -0700 Subject: [STRIP]: Fix neighbour table refcount leak. Found by inspection. The STRIP driver does neigh_lookup() but never releases. This driver shouldn't being doing gratuitous arp anyway. Untested, obviously, because of lack of hardware. Signed-off-by: Stephen Hemminger Signed-off-by: David S. Miller --- drivers/net/wireless/strip.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/wireless/strip.c b/drivers/net/wireless/strip.c index fd31885c684..ccaf28e8db0 100644 --- a/drivers/net/wireless/strip.c +++ b/drivers/net/wireless/strip.c @@ -467,6 +467,7 @@ static int arp_query(unsigned char *haddr, u32 paddr, struct net_device *dev) { struct neighbour *neighbor_entry; + int ret = 0; neighbor_entry = neigh_lookup(&arp_tbl, &paddr, dev); @@ -474,10 +475,11 @@ static int arp_query(unsigned char *haddr, u32 paddr, neighbor_entry->used = jiffies; if (neighbor_entry->nud_state & NUD_VALID) { memcpy(haddr, neighbor_entry->ha, dev->addr_len); - return 1; + ret = 1; } + neigh_release(neighbor_entry); } - return 0; + return ret; } static void DumpData(char *msg, struct strip *strip_info, __u8 * ptr, -- cgit v1.2.3-70-g09d2 From 404dda854b8bb04df72405d5088fa3e6100aef36 Mon Sep 17 00:00:00 2001 From: Krzysztof Helt Date: Mon, 28 Aug 2006 23:28:16 -0700 Subject: [SUNLANCE]: Fix probing problem. The current probe table causes ledma and lebuffer "le" devices to get probed twice which is not what we want. Match just "le" and look directly at the parent to get the correct top-level node information. Signed-off-by: Krzysztof Helt Signed-off-by: David S. Miller --- drivers/net/sunlance.c | 27 +++++++++++---------------- 1 file changed, 11 insertions(+), 16 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/sunlance.c b/drivers/net/sunlance.c index 0e3fdf7c6dd..ec0413609f3 100644 --- a/drivers/net/sunlance.c +++ b/drivers/net/sunlance.c @@ -1566,20 +1566,21 @@ static int __exit sunlance_sun4_remove(void) static int __devinit sunlance_sbus_probe(struct of_device *dev, const struct of_device_id *match) { struct sbus_dev *sdev = to_sbus_device(&dev->dev); - struct device_node *dp = dev->node; int err; - if (!strcmp(dp->name, "le")) { - err = sparc_lance_probe_one(sdev, NULL, NULL); - } else if (!strcmp(dp->name, "ledma")) { - struct sbus_dma *ledma = find_ledma(sdev); + if (sdev->parent) { + struct of_device *parent = &sdev->parent->ofdev; - err = sparc_lance_probe_one(sdev->child, ledma, NULL); - } else { - BUG_ON(strcmp(dp->name, "lebuffer")); + if (!strcmp(parent->node->name, "ledma")) { + struct sbus_dma *ledma = find_ledma(to_sbus_device(&parent->dev)); - err = sparc_lance_probe_one(sdev->child, NULL, sdev); - } + err = sparc_lance_probe_one(sdev, ledma, NULL); + } else if (!strcmp(parent->node->name, "lebuffer")) { + err = sparc_lance_probe_one(sdev, NULL, to_sbus_device(&parent->dev)); + } else + err = sparc_lance_probe_one(sdev, NULL, NULL); + } else + err = sparc_lance_probe_one(sdev, NULL, NULL); return err; } @@ -1604,12 +1605,6 @@ static struct of_device_id sunlance_sbus_match[] = { { .name = "le", }, - { - .name = "ledma", - }, - { - .name = "lebuffer", - }, {}, }; -- cgit v1.2.3-70-g09d2 From d279490543ee4e7c51371eb605b578ab47f45305 Mon Sep 17 00:00:00 2001 From: Brice Goglin Date: Tue, 5 Sep 2006 21:58:50 -0400 Subject: [PATCH] myri10ge: update the firmware download URL in Kconfig Update the firmware download URL in Kconfig to match the header in drivers/net/myri10ge/myri10ge.c. Signed-off-by: Brice Goglin Signed-off-by: Jeff Garzik --- drivers/net/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/net') diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig index 30b3671d833..a2bd8119270 100644 --- a/drivers/net/Kconfig +++ b/drivers/net/Kconfig @@ -2393,7 +2393,7 @@ config MYRI10GE you will need a newer firmware image. You may get this image or more information, at: - + To compile this driver as a module, choose M here and read . The module -- cgit v1.2.3-70-g09d2 From 519854876c66bd04b0c12d3cead6e0e5fc5a1167 Mon Sep 17 00:00:00 2001 From: Dirk Opfer Date: Wed, 6 Sep 2006 19:53:32 +0200 Subject: [PATCH] Fix dm9000 release_resource dm9000_release_board calls release_resource with the platform resource instead of the requested resource: db->addr_res = platform_get_resource(pdev, IORESOURCE_MEM, 0); db->addr_req = request_mem_region(db->addr_res->start, i, pdev->name); dm9000_release_board: if (db->addr_res != NULL) { release_resource(db->addr_res); kfree(db->addr_req); With this behavior the kernel will crash on the second removal. The attached patch fix this problem. Signed-off-by: Dirk Opfer Signed-off-by: Jeff Garzik --- drivers/net/dm9000.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/dm9000.c b/drivers/net/dm9000.c index 3d76fa144c4..a860ebbbf81 100644 --- a/drivers/net/dm9000.c +++ b/drivers/net/dm9000.c @@ -377,8 +377,8 @@ dm9000_release_board(struct platform_device *pdev, struct board_info *db) kfree(db->data_req); } - if (db->addr_res != NULL) { - release_resource(db->addr_res); + if (db->addr_req != NULL) { + release_resource(db->addr_req); kfree(db->addr_req); } } -- cgit v1.2.3-70-g09d2 From db888aed7e83559d61cff04bf002d0fb80ecbfa7 Mon Sep 17 00:00:00 2001 From: Ulrich Kunitz Date: Tue, 29 Aug 2006 23:50:29 +0100 Subject: [PATCH] zd1211rw: Fix of signal strength and quality measurement Caused by a documentation issue I mixed up fields of the zd_status structure. This patch fixes it and improves also the average computation, which is now using only measurements of packets sent by the access point. Signed-off-by: Ulrich Kunitz Signed-off-by: Daniel Drake Signed-off-by: John W. Linville --- drivers/net/wireless/zd1211rw/zd_chip.c | 61 +++++++++++++++++++++++++-------- drivers/net/wireless/zd1211rw/zd_mac.c | 43 ++++++++++++++++++----- drivers/net/wireless/zd1211rw/zd_mac.h | 11 +++--- 3 files changed, 88 insertions(+), 27 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/wireless/zd1211rw/zd_chip.c b/drivers/net/wireless/zd1211rw/zd_chip.c index da9d06bdb81..aa792821854 100644 --- a/drivers/net/wireless/zd1211rw/zd_chip.c +++ b/drivers/net/wireless/zd1211rw/zd_chip.c @@ -1430,9 +1430,43 @@ static int ofdm_qual_db(u8 status_quality, u8 rate, unsigned int size) break; } + switch (rate) { + case ZD_OFDM_RATE_6M: + case ZD_OFDM_RATE_9M: + i += 3; + break; + case ZD_OFDM_RATE_12M: + case ZD_OFDM_RATE_18M: + i += 5; + break; + case ZD_OFDM_RATE_24M: + case ZD_OFDM_RATE_36M: + i += 9; + break; + case ZD_OFDM_RATE_48M: + case ZD_OFDM_RATE_54M: + i += 15; + break; + default: + return -EINVAL; + } + return i; } +static int ofdm_qual_percent(u8 status_quality, u8 rate, unsigned int size) +{ + int r; + + r = ofdm_qual_db(status_quality, rate, size); + ZD_ASSERT(r >= 0); + if (r < 0) + r = 0; + + r = (r * 100)/29; + return r <= 100 ? r : 100; +} + static unsigned int log10times100(unsigned int x) { static const u8 log10[] = { @@ -1476,31 +1510,28 @@ static int cck_snr_db(u8 status_quality) return r; } -static int rx_qual_db(const void *rx_frame, unsigned int size, - const struct rx_status *status) +static int cck_qual_percent(u8 status_quality) { - return (status->frame_status&ZD_RX_OFDM) ? - ofdm_qual_db(status->signal_quality_ofdm, - zd_ofdm_plcp_header_rate(rx_frame), - size) : - cck_snr_db(status->signal_quality_cck); + int r; + + r = cck_snr_db(status_quality); + r = (100*r)/17; + return r <= 100 ? r : 100; } u8 zd_rx_qual_percent(const void *rx_frame, unsigned int size, const struct rx_status *status) { - int r = rx_qual_db(rx_frame, size, status); - if (r < 0) - r = 0; - r = (r * 100) / 14; - if (r > 100) - r = 100; - return r; + return (status->frame_status&ZD_RX_OFDM) ? + ofdm_qual_percent(status->signal_quality_ofdm, + zd_ofdm_plcp_header_rate(rx_frame), + size) : + cck_qual_percent(status->signal_quality_cck); } u8 zd_rx_strength_percent(u8 rssi) { - int r = (rssi*100) / 30; + int r = (rssi*100) / 41; if (r > 100) r = 100; return (u8) r; diff --git a/drivers/net/wireless/zd1211rw/zd_mac.c b/drivers/net/wireless/zd1211rw/zd_mac.c index d6f3e02a0b5..a9bd80a0861 100644 --- a/drivers/net/wireless/zd1211rw/zd_mac.c +++ b/drivers/net/wireless/zd1211rw/zd_mac.c @@ -816,13 +816,25 @@ static int filter_rx(struct ieee80211_device *ieee, return -EINVAL; } -static void update_qual_rssi(struct zd_mac *mac, u8 qual_percent, u8 rssi) +static void update_qual_rssi(struct zd_mac *mac, + const u8 *buffer, unsigned int length, + u8 qual_percent, u8 rssi_percent) { unsigned long flags; + struct ieee80211_hdr_3addr *hdr; + int i; + + hdr = (struct ieee80211_hdr_3addr *)buffer; + if (length < offsetof(struct ieee80211_hdr_3addr, addr3)) + return; + if (memcmp(hdr->addr2, zd_mac_to_ieee80211(mac)->bssid, ETH_ALEN) != 0) + return; spin_lock_irqsave(&mac->lock, flags); - mac->qual_average = (7 * mac->qual_average + qual_percent) / 8; - mac->rssi_average = (7 * mac->rssi_average + rssi) / 8; + i = mac->stats_count % ZD_MAC_STATS_BUFFER_SIZE; + mac->qual_buffer[i] = qual_percent; + mac->rssi_buffer[i] = rssi_percent; + mac->stats_count++; spin_unlock_irqrestore(&mac->lock, flags); } @@ -853,7 +865,6 @@ static int fill_rx_stats(struct ieee80211_rx_stats *stats, if (stats->rate) stats->mask |= IEEE80211_STATMASK_RATE; - update_qual_rssi(mac, stats->signal, stats->rssi); return 0; } @@ -877,6 +888,8 @@ int zd_mac_rx(struct zd_mac *mac, const u8 *buffer, unsigned int length) sizeof(struct rx_status); buffer += ZD_PLCP_HEADER_SIZE; + update_qual_rssi(mac, buffer, length, stats.signal, stats.rssi); + r = filter_rx(ieee, buffer, length, &stats); if (r <= 0) return r; @@ -981,17 +994,31 @@ struct iw_statistics *zd_mac_get_wireless_stats(struct net_device *ndev) { struct zd_mac *mac = zd_netdev_mac(ndev); struct iw_statistics *iw_stats = &mac->iw_stats; + unsigned int i, count, qual_total, rssi_total; memset(iw_stats, 0, sizeof(struct iw_statistics)); /* We are not setting the status, because ieee->state is not updated * at all and this driver doesn't track authentication state. */ spin_lock_irq(&mac->lock); - iw_stats->qual.qual = mac->qual_average; - iw_stats->qual.level = mac->rssi_average; - iw_stats->qual.updated = IW_QUAL_QUAL_UPDATED|IW_QUAL_LEVEL_UPDATED| - IW_QUAL_NOISE_INVALID; + count = mac->stats_count < ZD_MAC_STATS_BUFFER_SIZE ? + mac->stats_count : ZD_MAC_STATS_BUFFER_SIZE; + qual_total = rssi_total = 0; + for (i = 0; i < count; i++) { + qual_total += mac->qual_buffer[i]; + rssi_total += mac->rssi_buffer[i]; + } spin_unlock_irq(&mac->lock); + iw_stats->qual.updated = IW_QUAL_NOISE_INVALID; + if (count > 0) { + iw_stats->qual.qual = qual_total / count; + iw_stats->qual.level = rssi_total / count; + iw_stats->qual.updated |= + IW_QUAL_QUAL_UPDATED|IW_QUAL_LEVEL_UPDATED; + } else { + iw_stats->qual.updated |= + IW_QUAL_QUAL_INVALID|IW_QUAL_LEVEL_INVALID; + } /* TODO: update counter */ return iw_stats; } diff --git a/drivers/net/wireless/zd1211rw/zd_mac.h b/drivers/net/wireless/zd1211rw/zd_mac.h index 71e382c589e..b3ba49b8463 100644 --- a/drivers/net/wireless/zd1211rw/zd_mac.h +++ b/drivers/net/wireless/zd1211rw/zd_mac.h @@ -1,4 +1,4 @@ -/* zd_mac.c +/* zd_mac.h * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -87,9 +87,9 @@ struct rx_length_info { #define RX_LENGTH_INFO_TAG 0x697e struct rx_status { + u8 signal_quality_cck; /* rssi */ u8 signal_strength; - u8 signal_quality_cck; u8 signal_quality_ofdm; u8 decryption_type; u8 frame_status; @@ -120,14 +120,17 @@ enum mac_flags { MAC_FIXED_CHANNEL = 0x01, }; +#define ZD_MAC_STATS_BUFFER_SIZE 16 + struct zd_mac { struct net_device *netdev; struct zd_chip chip; spinlock_t lock; /* Unlocked reading possible */ struct iw_statistics iw_stats; - u8 qual_average; - u8 rssi_average; + unsigned int stats_count; + u8 qual_buffer[ZD_MAC_STATS_BUFFER_SIZE]; + u8 rssi_buffer[ZD_MAC_STATS_BUFFER_SIZE]; u8 regdomain; u8 default_regdomain; u8 requested_channel; -- cgit v1.2.3-70-g09d2 From 6a9516989f94df10d9a27ba543c6b53b3e69c84a Mon Sep 17 00:00:00 2001 From: Auke Kok Date: Mon, 11 Sep 2006 14:00:21 -0700 Subject: [PATCH] e1000: fix TX timout hang regression for 82542rev3 Commit 581d708eb47cccb5f41bc0817e50c9b004011ba8 (oct. 5 2005) introduced partial Multiqueue support for e1000 which broke macro smartness in setting up head/tail registers for 82542 rev3 chipsets, making these adapters completely non-working since 2.6.15. This commit sets the proper head and tail registers for read and write descriptor rings. Ths fix was tested on an 82542 rev3 NIC and newer NICs. Signed-off-by: Auke Kok Signed-off-by: Jeff Garzik --- drivers/net/e1000/e1000_main.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/e1000/e1000_main.c b/drivers/net/e1000/e1000_main.c index 726f43d5593..98ef9f85482 100644 --- a/drivers/net/e1000/e1000_main.c +++ b/drivers/net/e1000/e1000_main.c @@ -1433,8 +1433,8 @@ e1000_configure_tx(struct e1000_adapter *adapter) E1000_WRITE_REG(hw, TDBAL, (tdba & 0x00000000ffffffffULL)); E1000_WRITE_REG(hw, TDT, 0); E1000_WRITE_REG(hw, TDH, 0); - adapter->tx_ring[0].tdh = E1000_TDH; - adapter->tx_ring[0].tdt = E1000_TDT; + adapter->tx_ring[0].tdh = ((hw->mac_type >= e1000_82543) ? E1000_TDH : E1000_82542_TDH); + adapter->tx_ring[0].tdt = ((hw->mac_type >= e1000_82543) ? E1000_TDT : E1000_82542_TDT); break; } @@ -1840,8 +1840,8 @@ e1000_configure_rx(struct e1000_adapter *adapter) E1000_WRITE_REG(hw, RDBAL, (rdba & 0x00000000ffffffffULL)); E1000_WRITE_REG(hw, RDT, 0); E1000_WRITE_REG(hw, RDH, 0); - adapter->rx_ring[0].rdh = E1000_RDH; - adapter->rx_ring[0].rdt = E1000_RDT; + adapter->rx_ring[0].rdh = ((hw->mac_type >= e1000_82543) ? E1000_RDH : E1000_82542_RDH); + adapter->rx_ring[0].rdt = ((hw->mac_type >= e1000_82543) ? E1000_RDT : E1000_82542_RDT); break; } -- cgit v1.2.3-70-g09d2 From 71d28725548be203e8b8f6ad63b1f64fd7f02d4d Mon Sep 17 00:00:00 2001 From: Dale Farnsworth Date: Wed, 13 Sep 2006 09:21:08 -0700 Subject: [PATCH] mv643xx_eth: Unmap DMA buffers in receive path Fix a missing call to dma_unmap_single() in the receive path. Without this call, errors have been observed on non-cache-coherent systems. Signed-off-by Dale Farnsworth Signed-off-by: Jeff Garzik --- drivers/net/mv643xx_eth.c | 2 ++ 1 file changed, 2 insertions(+) (limited to 'drivers/net') diff --git a/drivers/net/mv643xx_eth.c b/drivers/net/mv643xx_eth.c index 760c61b9886..eeab1df5bef 100644 --- a/drivers/net/mv643xx_eth.c +++ b/drivers/net/mv643xx_eth.c @@ -385,6 +385,8 @@ static int mv643xx_eth_receive_queue(struct net_device *dev, int budget) struct pkt_info pkt_info; while (budget-- > 0 && eth_port_receive(mp, &pkt_info) == ETH_OK) { + dma_unmap_single(NULL, pkt_info.buf_ptr, RX_SKB_SIZE, + DMA_FROM_DEVICE); mp->rx_desc_count--; received_packets++; -- cgit v1.2.3-70-g09d2