From 2467ca46b6bb7672ed59fc74ac6780bf10bcd742 Mon Sep 17 00:00:00 2001 From: Ben Hutchings Date: Mon, 1 Sep 2008 12:48:50 +0100 Subject: sfc: Cleanup reset code Move more code from efx_reset() into efx_reset_down() and efx_reset_up(). Stop propagating MAC/PHY setting failures from efx_reset_down() and efx_reset_up() as these should not be fatal. Signed-off-by: Ben Hutchings Signed-off-by: Jeff Garzik --- drivers/net/sfc/efx.c | 98 +++++++++++++++++++++------------------------------ 1 file changed, 41 insertions(+), 57 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/sfc/efx.c b/drivers/net/sfc/efx.c index f226dcf18c7..f34dbf2c5b6 100644 --- a/drivers/net/sfc/efx.c +++ b/drivers/net/sfc/efx.c @@ -1527,46 +1527,58 @@ static void efx_unregister_netdev(struct efx_nic *efx) * **************************************************************************/ -/* The final hardware and software finalisation before reset. */ -static int efx_reset_down(struct efx_nic *efx, struct ethtool_cmd *ecmd) +/* Tears down the entire software state and most of the hardware state + * before reset. */ +static void efx_reset_down(struct efx_nic *efx, struct ethtool_cmd *ecmd) { int rc; EFX_ASSERT_RESET_SERIALISED(efx); + /* The net_dev->get_stats handler is quite slow, and will fail + * if a fetch is pending over reset. Serialise against it. */ + spin_lock(&efx->stats_lock); + spin_unlock(&efx->stats_lock); + + efx_stop_all(efx); + mutex_lock(&efx->mac_lock); + rc = falcon_xmac_get_settings(efx, ecmd); - if (rc) { + if (rc) EFX_ERR(efx, "could not back up PHY settings\n"); - goto fail; - } efx_fini_channels(efx); - return 0; - - fail: - return rc; } -/* The first part of software initialisation after a hardware reset - * This function does not handle serialisation with the kernel, it - * assumes the caller has done this */ -static int efx_reset_up(struct efx_nic *efx, struct ethtool_cmd *ecmd) +/* This function will always ensure that the locks acquired in + * efx_reset_down() are released. A failure return code indicates + * that we were unable to reinitialise the hardware, and the + * driver should be disabled. If ok is false, then the rx and tx + * engines are not restarted, pending a RESET_DISABLE. */ +static int efx_reset_up(struct efx_nic *efx, struct ethtool_cmd *ecmd, + bool ok) { int rc; - efx_init_channels(efx); + EFX_ASSERT_RESET_SERIALISED(efx); - /* Restore MAC and PHY settings. */ - rc = falcon_xmac_set_settings(efx, ecmd); + rc = falcon_init_nic(efx); if (rc) { - EFX_ERR(efx, "could not restore PHY settings\n"); - goto fail; + EFX_ERR(efx, "failed to initialise NIC\n"); + ok = false; } - return 0; + if (ok) { + efx_init_channels(efx); - fail: - efx_fini_channels(efx); + if (falcon_xmac_set_settings(efx, ecmd)) + EFX_ERR(efx, "could not restore PHY settings\n"); + } + + mutex_unlock(&efx->mac_lock); + + if (ok) + efx_start_all(efx); return rc; } @@ -1598,22 +1610,12 @@ static int efx_reset(struct efx_nic *efx) efx->state = STATE_RESETTING; EFX_INFO(efx, "resetting (%d)\n", method); - /* The net_dev->get_stats handler is quite slow, and will fail - * if a fetch is pending over reset. Serialise against it. */ - spin_lock(&efx->stats_lock); - spin_unlock(&efx->stats_lock); - - efx_stop_all(efx); - mutex_lock(&efx->mac_lock); - - rc = efx_reset_down(efx, &ecmd); - if (rc) - goto fail1; + efx_reset_down(efx, &ecmd); rc = falcon_reset_hw(efx, method); if (rc) { EFX_ERR(efx, "failed to reset hardware\n"); - goto fail2; + goto fail; } /* Allow resets to be rescheduled. */ @@ -1625,46 +1627,28 @@ static int efx_reset(struct efx_nic *efx) * can respond to requests. */ pci_set_master(efx->pci_dev); - /* Reinitialise device. This is appropriate in the RESET_TYPE_DISABLE - * case so the driver can talk to external SRAM */ - rc = falcon_init_nic(efx); - if (rc) { - EFX_ERR(efx, "failed to initialise NIC\n"); - goto fail3; - } - /* Leave device stopped if necessary */ if (method == RESET_TYPE_DISABLE) { - /* Reinitialise the device anyway so the driver unload sequence - * can talk to the external SRAM */ - falcon_init_nic(efx); rc = -EIO; - goto fail4; + goto fail; } - rc = efx_reset_up(efx, &ecmd); + rc = efx_reset_up(efx, &ecmd, true); if (rc) - goto fail5; + goto disable; - mutex_unlock(&efx->mac_lock); EFX_LOG(efx, "reset complete\n"); - efx->state = STATE_RUNNING; - efx_start_all(efx); - unlock_rtnl: rtnl_unlock(); return 0; - fail5: - fail4: - fail3: - fail2: - fail1: + fail: + efx_reset_up(efx, &ecmd, false); + disable: EFX_ERR(efx, "has been disabled\n"); efx->state = STATE_DISABLED; - mutex_unlock(&efx->mac_lock); rtnl_unlock(); efx_unregister_netdev(efx); efx_fini_port(efx); -- cgit v1.2.3-70-g09d2