From 1f90916264049a7d9e6106fd60d289c9a775d24f Mon Sep 17 00:00:00 2001 From: Ivo van Doorn Date: Tue, 8 Jul 2008 13:45:20 +0200 Subject: rt2x00: Disable synchronization during initialization As soon as init_registers() was called, the rt2400/rt2500 would start raising beacondone interrupts. Since this is highly premature since no beacons were provided yet, we should initialize the synchronization register to 0. This will make all drivers initialize it to 0 regardless if they are raising beacondone interrupts or not, since it only makes sense to have it completely disabled. Signed-off-by: Ivo van Doorn Signed-off-by: John W. Linville --- drivers/net/wireless/rt2x00/rt2400pci.c | 11 +++++++++++ drivers/net/wireless/rt2x00/rt2500pci.c | 11 +++++++++++ drivers/net/wireless/rt2x00/rt2500usb.c | 7 +++++++ drivers/net/wireless/rt2x00/rt61pci.c | 9 +++++++++ drivers/net/wireless/rt2x00/rt73usb.c | 9 +++++++++ 5 files changed, 47 insertions(+) (limited to 'drivers/net') diff --git a/drivers/net/wireless/rt2x00/rt2400pci.c b/drivers/net/wireless/rt2x00/rt2400pci.c index 560b9c73c0b..b36ed1c6c74 100644 --- a/drivers/net/wireless/rt2x00/rt2400pci.c +++ b/drivers/net/wireless/rt2x00/rt2400pci.c @@ -731,6 +731,17 @@ static int rt2400pci_init_registers(struct rt2x00_dev *rt2x00dev) (rt2x00dev->rx->data_size / 128)); rt2x00pci_register_write(rt2x00dev, CSR9, reg); + rt2x00pci_register_read(rt2x00dev, CSR14, ®); + rt2x00_set_field32(®, CSR14_TSF_COUNT, 0); + rt2x00_set_field32(®, CSR14_TSF_SYNC, 0); + rt2x00_set_field32(®, CSR14_TBCN, 0); + rt2x00_set_field32(®, CSR14_TCFP, 0); + rt2x00_set_field32(®, CSR14_TATIMW, 0); + rt2x00_set_field32(®, CSR14_BEACON_GEN, 0); + rt2x00_set_field32(®, CSR14_CFP_COUNT_PRELOAD, 0); + rt2x00_set_field32(®, CSR14_TBCM_PRELOAD, 0); + rt2x00pci_register_write(rt2x00dev, CSR14, reg); + rt2x00pci_register_write(rt2x00dev, CNT3, 0x3f080000); rt2x00pci_register_read(rt2x00dev, ARCSR0, ®); diff --git a/drivers/net/wireless/rt2x00/rt2500pci.c b/drivers/net/wireless/rt2x00/rt2500pci.c index a5ed54b6926..f7731fb8255 100644 --- a/drivers/net/wireless/rt2x00/rt2500pci.c +++ b/drivers/net/wireless/rt2x00/rt2500pci.c @@ -824,6 +824,17 @@ static int rt2500pci_init_registers(struct rt2x00_dev *rt2x00dev) rt2x00_set_field32(®, CSR11_CW_SELECT, 0); rt2x00pci_register_write(rt2x00dev, CSR11, reg); + rt2x00pci_register_read(rt2x00dev, CSR14, ®); + rt2x00_set_field32(®, CSR14_TSF_COUNT, 0); + rt2x00_set_field32(®, CSR14_TSF_SYNC, 0); + rt2x00_set_field32(®, CSR14_TBCN, 0); + rt2x00_set_field32(®, CSR14_TCFP, 0); + rt2x00_set_field32(®, CSR14_TATIMW, 0); + rt2x00_set_field32(®, CSR14_BEACON_GEN, 0); + rt2x00_set_field32(®, CSR14_CFP_COUNT_PRELOAD, 0); + rt2x00_set_field32(®, CSR14_TBCM_PRELOAD, 0); + rt2x00pci_register_write(rt2x00dev, CSR14, reg); + rt2x00pci_register_write(rt2x00dev, CNT3, 0); rt2x00pci_register_read(rt2x00dev, TXCSR8, ®); diff --git a/drivers/net/wireless/rt2x00/rt2500usb.c b/drivers/net/wireless/rt2x00/rt2500usb.c index 61e59c17a60..d90512f97b3 100644 --- a/drivers/net/wireless/rt2x00/rt2500usb.c +++ b/drivers/net/wireless/rt2x00/rt2500usb.c @@ -801,6 +801,13 @@ static int rt2500usb_init_registers(struct rt2x00_dev *rt2x00dev) rt2x00_set_field16(®, TXRX_CSR8_BBP_ID1_VALID, 0); rt2500usb_register_write(rt2x00dev, TXRX_CSR8, reg); + rt2500usb_register_read(rt2x00dev, TXRX_CSR19, ®); + rt2x00_set_field16(®, TXRX_CSR19_TSF_COUNT, 0); + rt2x00_set_field16(®, TXRX_CSR19_TSF_SYNC, 0); + rt2x00_set_field16(®, TXRX_CSR19_TBCN, 0); + rt2x00_set_field16(®, TXRX_CSR19_BEACON_GEN, 0); + rt2500usb_register_write(rt2x00dev, TXRX_CSR19, reg); + rt2500usb_register_write(rt2x00dev, TXRX_CSR21, 0xe78f); rt2500usb_register_write(rt2x00dev, MAC_CSR9, 0xff1d); diff --git a/drivers/net/wireless/rt2x00/rt61pci.c b/drivers/net/wireless/rt2x00/rt61pci.c index 14bc7b28165..c3afb5cbe80 100644 --- a/drivers/net/wireless/rt2x00/rt61pci.c +++ b/drivers/net/wireless/rt2x00/rt61pci.c @@ -1201,6 +1201,15 @@ static int rt61pci_init_registers(struct rt2x00_dev *rt2x00dev) rt2x00_set_field32(®, TXRX_CSR8_ACK_CTS_54MBS, 42); rt2x00pci_register_write(rt2x00dev, TXRX_CSR8, reg); + rt2x00pci_register_read(rt2x00dev, TXRX_CSR9, ®); + rt2x00_set_field32(®, TXRX_CSR9_BEACON_INTERVAL, 0); + rt2x00_set_field32(®, TXRX_CSR9_TSF_TICKING, 0); + rt2x00_set_field32(®, TXRX_CSR9_TSF_SYNC, 0); + rt2x00_set_field32(®, TXRX_CSR9_TBTT_ENABLE, 0); + rt2x00_set_field32(®, TXRX_CSR9_BEACON_GEN, 0); + rt2x00_set_field32(®, TXRX_CSR9_TIMESTAMP_COMPENSATE, 0); + rt2x00pci_register_write(rt2x00dev, TXRX_CSR9, reg); + rt2x00pci_register_write(rt2x00dev, TXRX_CSR15, 0x0000000f); rt2x00pci_register_write(rt2x00dev, MAC_CSR6, 0x00000fff); diff --git a/drivers/net/wireless/rt2x00/rt73usb.c b/drivers/net/wireless/rt2x00/rt73usb.c index 83cc0147f69..46e9e081fbf 100644 --- a/drivers/net/wireless/rt2x00/rt73usb.c +++ b/drivers/net/wireless/rt2x00/rt73usb.c @@ -1006,6 +1006,15 @@ static int rt73usb_init_registers(struct rt2x00_dev *rt2x00dev) rt2x00_set_field32(®, TXRX_CSR8_ACK_CTS_54MBS, 42); rt73usb_register_write(rt2x00dev, TXRX_CSR8, reg); + rt73usb_register_read(rt2x00dev, TXRX_CSR9, ®); + rt2x00_set_field32(®, TXRX_CSR9_BEACON_INTERVAL, 0); + rt2x00_set_field32(®, TXRX_CSR9_TSF_TICKING, 0); + rt2x00_set_field32(®, TXRX_CSR9_TSF_SYNC, 0); + rt2x00_set_field32(®, TXRX_CSR9_TBTT_ENABLE, 0); + rt2x00_set_field32(®, TXRX_CSR9_BEACON_GEN, 0); + rt2x00_set_field32(®, TXRX_CSR9_TIMESTAMP_COMPENSATE, 0); + rt73usb_register_write(rt2x00dev, TXRX_CSR9, reg); + rt73usb_register_write(rt2x00dev, TXRX_CSR15, 0x0000000f); rt73usb_register_read(rt2x00dev, MAC_CSR6, ®); -- cgit v1.2.3-70-g09d2 From 86229f0c7b4e065f51b5572a8a61801e281740a0 Mon Sep 17 00:00:00 2001 From: Luis Carlos Cobo Date: Tue, 8 Jul 2008 16:19:21 +0200 Subject: zd1211rw: stop beacons on remove_interface If a mesh or ad-hoc interface is brought up and later it is replaced by managed interface, the managed interface will keep transmitting the beacons that were configured for the former interface. This patch fixes that behaviour. Signed-off-by: John W. Linville --- drivers/net/wireless/zd1211rw/zd_mac.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers/net') diff --git a/drivers/net/wireless/zd1211rw/zd_mac.c b/drivers/net/wireless/zd1211rw/zd_mac.c index 418606ac1c3..694e95d35fd 100644 --- a/drivers/net/wireless/zd1211rw/zd_mac.c +++ b/drivers/net/wireless/zd1211rw/zd_mac.c @@ -765,6 +765,7 @@ static void zd_op_remove_interface(struct ieee80211_hw *hw, { struct zd_mac *mac = zd_hw_mac(hw); mac->type = IEEE80211_IF_TYPE_INVALID; + zd_set_beacon_interval(&mac->chip, 0); zd_write_mac_addr(&mac->chip, NULL); } -- cgit v1.2.3-70-g09d2 From 814feefa859a736d29d0700d49debf13904b429f Mon Sep 17 00:00:00 2001 From: Ihar Hrachyshka Date: Wed, 9 Jul 2008 09:29:58 +0300 Subject: libertas: fix memory alignment problems on the blackfin Fixing unaligned memory access on the blackfin architecture. Signed-off-by: Ihar Hrachyshka Signed-off-by: John W. Linville --- drivers/net/wireless/libertas/scan.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/wireless/libertas/scan.c b/drivers/net/wireless/libertas/scan.c index d448c9702a0..387d4878af2 100644 --- a/drivers/net/wireless/libertas/scan.c +++ b/drivers/net/wireless/libertas/scan.c @@ -567,11 +567,11 @@ static int lbs_process_bss(struct bss_descriptor *bss, pos += 8; /* beacon interval is 2 bytes long */ - bss->beaconperiod = le16_to_cpup((void *) pos); + bss->beaconperiod = get_unaligned_le16(pos); pos += 2; /* capability information is 2 bytes long */ - bss->capability = le16_to_cpup((void *) pos); + bss->capability = get_unaligned_le16(pos); lbs_deb_scan("process_bss: capabilities 0x%04x\n", bss->capability); pos += 2; -- cgit v1.2.3-70-g09d2 From e35259a95331ae4a9146cc03ab49aad641cab957 Mon Sep 17 00:00:00 2001 From: Max Krasnyansky Date: Thu, 10 Jul 2008 16:59:11 -0700 Subject: tun: Persistent devices can get stuck in xoff state The scenario goes like this. App stops reading from tun/tap. TX queue gets full and driver does netif_stop_queue(). App closes fd and TX queue gets flushed as part of the cleanup. Next time the app opens tun/tap and starts reading from it but the xoff state is not cleared. We're stuck. Normally xoff state is cleared when netdev is brought up. But in the case of persistent devices this happens only during initial setup. The fix is trivial. If device is already up when an app opens it we clear xoff state and that gets things moving again. Signed-off-by: Max Krasnyansky Tested-by: Christian Borntraeger Signed-off-by: David S. Miller --- drivers/net/tun.c | 6 ++++++ 1 file changed, 6 insertions(+) (limited to 'drivers/net') diff --git a/drivers/net/tun.c b/drivers/net/tun.c index 7ab94c825b5..b9018bfa0a9 100644 --- a/drivers/net/tun.c +++ b/drivers/net/tun.c @@ -602,6 +602,12 @@ static int tun_set_iff(struct net *net, struct file *file, struct ifreq *ifr) tun->attached = 1; get_net(dev_net(tun->dev)); + /* Make sure persistent devices do not get stuck in + * xoff state. + */ + if (netif_running(tun->dev)) + netif_wake_queue(tun->dev); + strcpy(ifr->ifr_name, tun->dev->name); return 0; -- cgit v1.2.3-70-g09d2 From 9076689ab07974a6f5d230fc241448f7a77e9078 Mon Sep 17 00:00:00 2001 From: Krzysztof Halasa Date: Wed, 9 Jul 2008 13:10:32 +0200 Subject: ARM: IXP4xx Ethernet NAPI fix MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit This patch removes some weirdness from IXP4xx Ethernet driver. Signed-off-by: Krzysztof Hałasa Signed-off-by: Jeff Garzik --- drivers/net/arm/ixp4xx_eth.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/arm/ixp4xx_eth.c b/drivers/net/arm/ixp4xx_eth.c index c617b64c288..9b777d9433c 100644 --- a/drivers/net/arm/ixp4xx_eth.c +++ b/drivers/net/arm/ixp4xx_eth.c @@ -522,7 +522,6 @@ static int eth_poll(struct napi_struct *napi, int budget) #endif if ((n = queue_get_desc(rxq, port, 0)) < 0) { - received = 0; /* No packet received */ #if DEBUG_RX printk(KERN_DEBUG "%s: eth_poll netif_rx_complete\n", dev->name); @@ -543,7 +542,7 @@ static int eth_poll(struct napi_struct *napi, int budget) printk(KERN_DEBUG "%s: eth_poll all done\n", dev->name); #endif - return 0; /* all work done */ + return received; /* all work done */ } desc = rx_desc_ptr(port, n); -- cgit v1.2.3-70-g09d2