From 3e1657c8ef53e1cd541cc1e420f3230dc075949b Mon Sep 17 00:00:00 2001 From: Auke Kok Date: Mon, 21 May 2007 14:51:35 -0700 Subject: e1000: Don't enable polling in open() (was: e1000: assertion hit in e1000_clean(), kernel 2.6.21.1) Herbert Xu wrote: "netif_poll_enable can only be called if you've previously called netif_poll_disable. Otherwise a poll might already be in action and you may get a crash like this." Removing the call to netif_poll_enable in e1000_open should fix this issue, the only other call to netif_poll_enable is in e1000_up() which is only reached after a device reset or resume. Bugzilla: http://bugzilla.kernel.org/show_bug.cgi?id=8455 https://bugzilla.redhat.com/bugzilla/show_bug.cgi?id=240339 Tested by Doug Chapman Signed-off-by: Auke Kok Acked-by: Herbert Xu Signed-off-by: Jeff Garzik --- drivers/net/e1000/e1000_main.c | 4 ---- 1 file changed, 4 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/e1000/e1000_main.c b/drivers/net/e1000/e1000_main.c index 49be393e1c1..cbc7febe9cd 100644 --- a/drivers/net/e1000/e1000_main.c +++ b/drivers/net/e1000/e1000_main.c @@ -1431,10 +1431,6 @@ e1000_open(struct net_device *netdev) /* From here on the code is the same as e1000_up() */ clear_bit(__E1000_DOWN, &adapter->flags); -#ifdef CONFIG_E1000_NAPI - netif_poll_enable(netdev); -#endif - e1000_irq_enable(adapter); /* fire a link status change interrupt to start the watchdog */ -- cgit v1.2.3-70-g09d2