From 1ae861e652b5457e7fa98ccbc55abea1e207916e Mon Sep 17 00:00:00 2001 From: "Rafael J. Wysocki" Date: Thu, 31 Dec 2009 12:15:54 +0100 Subject: PCI/PM: Use per-device D3 delays It turns out that some PCI devices require extra delays when changing power state from D3 to D0 (and the other way around). Although this is against the PCI specification, we can handle it quite easily by allowing drivers to define arbitrary D3 delays for devices known to require extra time for switching power states. Introduce additional field d3_delay in struct pci_dev and use it to store the value of the device's D0->D3 delay, in miliseconds. Make the PCI PM core code use the per-device d3_delay unless pci_pm_d3_delay is greater (in which case the latter is used). [This also allows the driver to specify d3_delay shorter than the 10 ms required by the PCI standard if the device is known to be able to handle that.] Make the sky2 driver set d3_delay to 150 for devices handled by it. Fixes http://bugzilla.kernel.org/show_bug.cgi?id=14730 which is a listed regression from 2.6.30. Signed-off-by: Rafael J. Wysocki Signed-off-by: Jesse Barnes --- drivers/net/sky2.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers/net') diff --git a/drivers/net/sky2.c b/drivers/net/sky2.c index 1c01b96c961..2d28d58200d 100644 --- a/drivers/net/sky2.c +++ b/drivers/net/sky2.c @@ -4684,6 +4684,7 @@ static int __devinit sky2_probe(struct pci_dev *pdev, INIT_WORK(&hw->restart_work, sky2_restart); pci_set_drvdata(pdev, hw); + pdev->d3_delay = 150; return 0; -- cgit v1.2.3-70-g09d2 From dc2f9c5a13de4f9fd63f49f54add40b2924f66cd Mon Sep 17 00:00:00 2001 From: Li Jie Date: Thu, 31 Dec 2009 16:03:16 +0100 Subject: ARM: 5865/1: nuc900 ethernet driver needs mii nuc900 ethernet driver uses mii_xx_xx serials api, so mii module should be selected. Signed-off-by: lijie Acked-by: Wan ZongShun Signed-off-by: Russell King --- drivers/net/arm/Kconfig | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers/net') diff --git a/drivers/net/arm/Kconfig b/drivers/net/arm/Kconfig index c37ee9e6b67..39e1c0d3947 100644 --- a/drivers/net/arm/Kconfig +++ b/drivers/net/arm/Kconfig @@ -68,6 +68,7 @@ config W90P910_ETH tristate "Nuvoton w90p910 Ethernet support" depends on ARM && ARCH_W90X900 select PHYLIB + select MII help Say Y here if you want to use built-in Ethernet ports on w90p910 processor. -- cgit v1.2.3-70-g09d2 From b4f77264cd1a858ee09da8dba5a2711a649adbf3 Mon Sep 17 00:00:00 2001 From: Eli Cohen Date: Wed, 6 Jan 2010 12:54:39 -0800 Subject: mlx4_core: Fix cleanup in __mlx4_init_one() error path If mlx4_init_port_info() fails, cleanup the initialized ports only. Signed-off-by: Eli Cohen Signed-off-by: Roland Dreier --- drivers/net/mlx4/main.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/net') diff --git a/drivers/net/mlx4/main.c b/drivers/net/mlx4/main.c index 291a505fd4f..3cf56d90d85 100644 --- a/drivers/net/mlx4/main.c +++ b/drivers/net/mlx4/main.c @@ -1174,7 +1174,7 @@ static int __mlx4_init_one(struct pci_dev *pdev, const struct pci_device_id *id) return 0; err_port: - for (port = 1; port <= dev->caps.num_ports; port++) + for (--port; port >= 1; --port) mlx4_cleanup_port_info(&priv->port[port]); mlx4_cleanup_mcg_table(dev); -- cgit v1.2.3-70-g09d2 From c8106d7625a58ee4387cb2efe3e82320ad44b467 Mon Sep 17 00:00:00 2001 From: Zhu Yi Date: Fri, 8 Jan 2010 10:04:30 -0800 Subject: iwlwifi: fix iwl_queue_used bug when read_ptr == write_ptr When txq read_ptr equals to write_ptr, iwl_queue_used should always return false. Because there is no used TFD in this case. This is a complementary fix to the fix already included in commit "iwl3945: fix panic in iwl3945 driver". Both fixes are needed to address the panic below. This problem was discussed on linux-wireless in http://thread.gmane.org/gmane.linux.kernel.wireless.general/43568 <1>[ 7290.414172] IP: [] iwl3945_rx_reply_tx+0xc1/0x450 [iwl3945] <4>[ 7290.414205] PGD 0 <1>[ 7290.414214] Thread overran stack, or stack corrupted <0>[ 7290.414229] Oops: 0002 [#1] PREEMPT SMP <0>[ 7290.414246] last sysfs file: /sys/devices/platform/coretemp.1/temp1_input <4>[ 7290.414265] CPU 0 <4>[ 7290.414274] Modules linked in: af_packet nfsd usb_storage usb_libusual cpufreq_powersave exportfs cpufreq_conservative iwl3945 nfs cpufreq_userspace snd_hda_codec_realtek acpi_cpufreq uvcvideo lockd iwlcore snd_hda_intel joydev coretemp nfs_acl videodev snd_hda_codec mac80211 v4l1_compat snd_hwdep sbp2 v4l2_compat_ioctl32 uhci_hcd psmouse auth_rpcgss ohci1394 cfg80211 ehci_hcd video ieee1394 snd_pcm serio_raw battery ac nvidia(P) usbcore output sunrpc evdev lirc_ene0100 snd_page_alloc rfkill tg3 libphy fuse lzo lzo_decompress lzo_compress <6>[ 7290.414486] Pid: 0, comm: swapper Tainted: P 2.6.32-rc8-wl #213 Aspire 5720 <6>[ 7290.414507] RIP: 0010:[] [] iwl3945_rx_reply_tx+0xc1/0x450 [iwl3945] <6>[ 7290.414541] RSP: 0018:ffff880002203d60 EFLAGS: 00010246 <6>[ 7290.414557] RAX: 000000000000004f RBX: ffff880064c11600 RCX: 0000000000000013 <6>[ 7290.414576] RDX: ffffffffa0ddcf20 RSI: ffff8800512b7008 RDI: 0000000000000038 <6>[ 7290.414596] RBP: ffff880002203dd0 R08: 0000000000000000 R09: 0000000000000100 <6>[ 7290.414616] R10: 0000000000000001 R11: 0000000000000000 R12: 00000000000000a0 <6>[ 7290.414635] R13: 0000000000000002 R14: 0000000000000013 R15: 0000000000020201 <6>[ 7290.414655] FS: 0000000000000000(0000) GS:ffff880002200000(0000) knlGS:0000000000000000 <6>[ 7290.414677] CS: 0010 DS: 0018 ES: 0018 CR0: 000000008005003b <6>[ 7290.414693] CR2: 0000000000000041 CR3: 0000000001001000 CR4: 00000000000006f0 <6>[ 7290.414712] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 <6>[ 7290.414732] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 <4>[ 7290.414752] Process swapper (pid: 0, threadinfo ffffffff81524000, task ffffffff81528b60) <0>[ 7290.414772] Stack: <4>[ 7290.414780] ffff880002203da0 0000000000000046 0000000000000000 0000000000000046 <4>[ 7290.414804] <0> 0000000000000282 0000000000000282 0000000000000282 ffff880064c12010 <4>[ 7290.414830] <0> ffff880002203db0 ffff880064c11600 ffff880064c12e50 ffff8800512b7000 <0>[ 7290.414858] Call Trace: <0>[ 7290.414867] <4>[ 7290.414884] [] iwl3945_irq_tasklet+0x657/0x1740 [iwl3945] <4>[ 7290.414910] [] ? _spin_unlock+0x30/0x60 <4>[ 7290.414931] [] tasklet_action+0x101/0x110 <4>[ 7290.414950] [] __do_softirq+0xc0/0x160 <4>[ 7290.414968] [] call_softirq+0x1c/0x30 <4>[ 7290.414986] [] do_softirq+0x75/0xb0 <4>[ 7290.415003] [] irq_exit+0x95/0xa0 <4>[ 7290.415020] [] do_IRQ+0x77/0xf0 <4>[ 7290.415038] [] ret_from_intr+0x0/0xf <0>[ 7290.415052] <4>[ 7290.415067] [] ? acpi_idle_enter_bm+0x270/0x2a5 <4>[ 7290.415087] [] ? acpi_idle_enter_bm+0x27a/0x2a5 <4>[ 7290.415107] [] ? acpi_idle_enter_bm+0x270/0x2a5 <4>[ 7290.415130] [] ? cpuidle_idle_call+0x93/0xf0 <4>[ 7290.415149] [] ? cpu_idle+0xa7/0x110 <4>[ 7290.415168] [] ? rest_init+0x75/0x80 <4>[ 7290.415187] [] ? start_kernel+0x3a7/0x3b3 <4>[ 7290.415206] [] ? x86_64_start_reservations+0x125/0x129 <4>[ 7290.415227] [] ? x86_64_start_kernel+0xe4/0xeb <0>[ 7290.415243] Code: 00 41 39 ce 0f 8d e8 01 00 00 48 8b 47 40 48 63 d2 48 69 d2 98 00 00 00 4c 8b 04 02 48 c7 c2 20 cf dd a0 49 8d 78 38 49 8d 40 4f 47 09 00 c6 47 0c 00 c6 47 0f 00 c6 47 12 00 c6 47 15 00 49 <1>[ 7290.415382] RIP [] iwl3945_rx_reply_tx+0xc1/0x450 [iwl3945] <4>[ 7290.415410] RSP <0>[ 7290.415421] CR2: 0000000000000041 <4>[ 7290.415436] ---[ end trace ec46807277caa515 ]--- <0>[ 7290.415450] Kernel panic - not syncing: Fatal exception in interrupt <4>[ 7290.415468] Pid: 0, comm: swapper Tainted: P D 2.6.32-rc8-wl #213 <4>[ 7290.415486] Call Trace: <4>[ 7290.415495] [] panic+0x7d/0x13a <4>[ 7290.415519] [] oops_end+0xda/0xe0 <4>[ 7290.415538] [] no_context+0xea/0x250 <4>[ 7290.415557] [] ? select_task_rq_fair+0x511/0x780 <4>[ 7290.415578] [] __bad_area_nosemaphore+0x125/0x1e0 <4>[ 7290.415597] [] ? __enqueue_entity+0x7c/0x80 <4>[ 7290.415616] [] ? enqueue_task_fair+0x111/0x150 <4>[ 7290.415636] [] bad_area_nosemaphore+0xe/0x10 <4>[ 7290.415656] [] do_page_fault+0x26a/0x320 <4>[ 7290.415674] [] page_fault+0x1f/0x30 <4>[ 7290.415697] [] ? iwl3945_rx_reply_tx+0xc1/0x450 [iwl3945] <4>[ 7290.415723] [] iwl3945_irq_tasklet+0x657/0x1740 [iwl3945] <4>[ 7290.415746] [] ? _spin_unlock+0x30/0x60 <4>[ 7290.415764] [] tasklet_action+0x101/0x110 <4>[ 7290.415783] [] __do_softirq+0xc0/0x160 <4>[ 7290.415801] [] call_softirq+0x1c/0x30 <4>[ 7290.415818] [] do_softirq+0x75/0xb0 <4>[ 7290.415835] [] irq_exit+0x95/0xa0 <4>[ 7290.415852] [] do_IRQ+0x77/0xf0 <4>[ 7290.415869] [] ret_from_intr+0x0/0xf <4>[ 7290.415883] [] ? acpi_idle_enter_bm+0x270/0x2a5 <4>[ 7290.415911] [] ? acpi_idle_enter_bm+0x27a/0x2a5 <4>[ 7290.415931] [] ? acpi_idle_enter_bm+0x270/0x2a5 <4>[ 7290.415952] [] ? cpuidle_idle_call+0x93/0xf0 <4>[ 7290.415971] [] ? cpu_idle+0xa7/0x110 <4>[ 7290.415989] [] ? rest_init+0x75/0x80 <4>[ 7290.416007] [] ? start_kernel+0x3a7/0x3b3 <4>[ 7290.416026] [] ? x86_64_start_reservations+0x125/0x129 <4>[ 7290.416047] [] ? x86_64_start_kernel+0xe4/0xeb Reported-by: Maxim Levitsky Tested-by: Maxim Levitsky Signed-off-by: Zhu Yi Signed-off-by: Reinette Chatre CC: stable@kernel.org Signed-off-by: John W. Linville --- drivers/net/wireless/iwlwifi/iwl-dev.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/net') diff --git a/drivers/net/wireless/iwlwifi/iwl-dev.h b/drivers/net/wireless/iwlwifi/iwl-dev.h index 165d1f6e2dd..3822cf53e36 100644 --- a/drivers/net/wireless/iwlwifi/iwl-dev.h +++ b/drivers/net/wireless/iwlwifi/iwl-dev.h @@ -711,7 +711,7 @@ extern void iwl_txq_ctx_stop(struct iwl_priv *priv); extern int iwl_queue_space(const struct iwl_queue *q); static inline int iwl_queue_used(const struct iwl_queue *q, int i) { - return q->write_ptr > q->read_ptr ? + return q->write_ptr >= q->read_ptr ? (i >= q->read_ptr && i < q->write_ptr) : !(i < q->read_ptr && i >= q->write_ptr); } -- cgit v1.2.3-70-g09d2 From c91c3efca5297bd67324654524ced38162f2e579 Mon Sep 17 00:00:00 2001 From: Abhijeet Kolekar Date: Fri, 8 Jan 2010 10:04:31 -0800 Subject: iwlwifi: disable tx on beacon update notification On beacon change update notification from mac we are not disabling the tx in adhoc mode. Mac sends BSS_CHANGED_BEACON_ENABLED when station leaves IBSS. Driver should indicate uCode to not to send anything on receiving this notification. Functionality to indicate uCode is duplicated across two notifications so created a common function called iwl_set_no_assoc. Fix the issue at http://bugzilla.intellinuxwireless.org/show_bug.cgi?id=2133. Signed-off-by: Abhijeet Kolekar Tested-by: Johannes Berg Signed-off-by: Reinette Chatre Signed-off-by: John W. Linville --- drivers/net/wireless/iwlwifi/iwl-core.c | 45 ++++++++++++++++++--------------- 1 file changed, 25 insertions(+), 20 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/wireless/iwlwifi/iwl-core.c b/drivers/net/wireless/iwlwifi/iwl-core.c index 574d3665870..5461f105bd2 100644 --- a/drivers/net/wireless/iwlwifi/iwl-core.c +++ b/drivers/net/wireless/iwlwifi/iwl-core.c @@ -2344,6 +2344,21 @@ static void iwl_ht_conf(struct iwl_priv *priv, IWL_DEBUG_MAC80211(priv, "leave\n"); } +static inline void iwl_set_no_assoc(struct iwl_priv *priv) +{ + priv->assoc_id = 0; + iwl_led_disassociate(priv); + /* + * inform the ucode that there is no longer an + * association and that no more packets should be + * sent + */ + priv->staging_rxon.filter_flags &= + ~RXON_FILTER_ASSOC_MSK; + priv->staging_rxon.assoc_id = 0; + iwlcore_commit_rxon(priv); +} + #define IWL_DELAY_NEXT_SCAN_AFTER_ASSOC (HZ*6) void iwl_bss_info_changed(struct ieee80211_hw *hw, struct ieee80211_vif *vif, @@ -2475,20 +2490,8 @@ void iwl_bss_info_changed(struct ieee80211_hw *hw, IWL_DELAY_NEXT_SCAN_AFTER_ASSOC; if (!iwl_is_rfkill(priv)) priv->cfg->ops->lib->post_associate(priv); - } else { - priv->assoc_id = 0; - iwl_led_disassociate(priv); - - /* - * inform the ucode that there is no longer an - * association and that no more packets should be - * send - */ - priv->staging_rxon.filter_flags &= - ~RXON_FILTER_ASSOC_MSK; - priv->staging_rxon.assoc_id = 0; - iwlcore_commit_rxon(priv); - } + } else + iwl_set_no_assoc(priv); } if (changes && iwl_is_associated(priv) && priv->assoc_id) { @@ -2503,12 +2506,14 @@ void iwl_bss_info_changed(struct ieee80211_hw *hw, } } - if ((changes & BSS_CHANGED_BEACON_ENABLED) && - vif->bss_conf.enable_beacon) { - memcpy(priv->staging_rxon.bssid_addr, - bss_conf->bssid, ETH_ALEN); - memcpy(priv->bssid, bss_conf->bssid, ETH_ALEN); - iwlcore_config_ap(priv); + if (changes & BSS_CHANGED_BEACON_ENABLED) { + if (vif->bss_conf.enable_beacon) { + memcpy(priv->staging_rxon.bssid_addr, + bss_conf->bssid, ETH_ALEN); + memcpy(priv->bssid, bss_conf->bssid, ETH_ALEN); + iwlcore_config_ap(priv); + } else + iwl_set_no_assoc(priv); } mutex_unlock(&priv->mutex); -- cgit v1.2.3-70-g09d2 From 39825f4dc9f4e409e8ea43ef4df04a924699ad1f Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Sat, 9 Jan 2010 11:41:48 +0300 Subject: iwlwifi: silence buffer overflow warning Smatch (and presumably other static checkers) complain that MAX_TID_COUNT is past the end of the array. In the resulting discussion, Zhu Yi pointed out that this value is not used in real life and the assignment was only there to silence a gcc warning. If there were a bug in the surrounding code and the value were used, the WARN_ON(!qc) would print a warning before the crash. Signed-off-by: Dan Carpenter Acked-by: Zhu Yi Signed-off-by: John W. Linville --- drivers/net/wireless/iwlwifi/iwl-4965.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/net') diff --git a/drivers/net/wireless/iwlwifi/iwl-4965.c b/drivers/net/wireless/iwlwifi/iwl-4965.c index 761aab127e7..9b4b8b5c757 100644 --- a/drivers/net/wireless/iwlwifi/iwl-4965.c +++ b/drivers/net/wireless/iwlwifi/iwl-4965.c @@ -1961,7 +1961,7 @@ static void iwl4965_rx_reply_tx(struct iwl_priv *priv, struct ieee80211_tx_info *info; struct iwl4965_tx_resp *tx_resp = (void *)&pkt->u.raw[0]; u32 status = le32_to_cpu(tx_resp->u.status); - int tid = MAX_TID_COUNT - 1; + int uninitialized_var(tid); int sta_id; int freed; u8 *qc = NULL; -- cgit v1.2.3-70-g09d2 From 9db2f1bec36805e57a003f7bb90e003815d96de8 Mon Sep 17 00:00:00 2001 From: Jarek Poplawski Date: Mon, 4 Jan 2010 08:48:41 +0000 Subject: sky2: Fix oops in sky2_xmit_frame() after TX timeout During TX timeout procedure dev could be awoken too early, e.g. by sky2_complete_tx() called from sky2_down(). Then sky2_xmit_frame() can run while buffers are freed causing an oops. This patch fixes it by adding netif_device_present() test in sky2_tx_complete(). Fixes: http://bugzilla.kernel.org/show_bug.cgi?id=14925 With debugging by: Mike McCormack Reported-by: Berck E. Nash Tested-by: Berck E. Nash Signed-off-by: Jarek Poplawski Signed-off-by: David S. Miller --- drivers/net/sky2.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'drivers/net') diff --git a/drivers/net/sky2.c b/drivers/net/sky2.c index 1c01b96c961..7650f739a81 100644 --- a/drivers/net/sky2.c +++ b/drivers/net/sky2.c @@ -1844,7 +1844,8 @@ static void sky2_tx_complete(struct sky2_port *sky2, u16 done) sky2->tx_cons = idx; smp_mb(); - if (tx_avail(sky2) > MAX_SKB_TX_LE + 4) + /* Wake unless it's detached, and called e.g. from sky2_down() */ + if (tx_avail(sky2) > MAX_SKB_TX_LE + 4 && netif_device_present(dev)) netif_wake_queue(dev); } -- cgit v1.2.3-70-g09d2 From 1a647bd213d85c88507967104aea79b2649e6a6e Mon Sep 17 00:00:00 2001 From: Alexander Duyck Date: Wed, 13 Jan 2010 01:49:13 +0000 Subject: ixgbe: Do not attempt to perform interrupts in netpoll when down This patch resolves issues seen when running netconsole and rebooting via reboot -f. The issue was due to the fact that we were attempting to perform interrupt actions when the q_vectors and rings had already been freed via the ixgbe_shutdown routines. Signed-off-by: Alexander Duyck Acked-by: Mallikarjuna R Chilakala Signed-off-by: Jeff Kirsher Signed-off-by: David S. Miller --- drivers/net/ixgbe/ixgbe_main.c | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'drivers/net') diff --git a/drivers/net/ixgbe/ixgbe_main.c b/drivers/net/ixgbe/ixgbe_main.c index 2ad754c864c..385976709e7 100644 --- a/drivers/net/ixgbe/ixgbe_main.c +++ b/drivers/net/ixgbe/ixgbe_main.c @@ -5576,6 +5576,10 @@ static void ixgbe_netpoll(struct net_device *netdev) struct ixgbe_adapter *adapter = netdev_priv(netdev); int i; + /* if interface is down do nothing */ + if (test_bit(__IXGBE_DOWN, &adapter->state)) + return; + adapter->flags |= IXGBE_FLAG_IN_NETPOLL; if (adapter->flags & IXGBE_FLAG_MSIX_ENABLED) { int num_q_vectors = adapter->num_msix_vectors - NON_Q_VECTORS; -- cgit v1.2.3-70-g09d2 From 8c47eaa76600cebc4869a42abb4568925ade6c47 Mon Sep 17 00:00:00 2001 From: Shannon Nelson Date: Wed, 13 Jan 2010 01:49:34 +0000 Subject: ixgbe: update copyright dates Signed-off-by: Shannon Nelson Signed-off-by: Jeff Kirsher Signed-off-by: David S. Miller --- drivers/net/ixgbe/Makefile | 2 +- drivers/net/ixgbe/ixgbe.h | 2 +- drivers/net/ixgbe/ixgbe_82598.c | 2 +- drivers/net/ixgbe/ixgbe_82599.c | 2 +- drivers/net/ixgbe/ixgbe_common.c | 2 +- drivers/net/ixgbe/ixgbe_common.h | 2 +- drivers/net/ixgbe/ixgbe_dcb.c | 2 +- drivers/net/ixgbe/ixgbe_dcb.h | 2 +- drivers/net/ixgbe/ixgbe_dcb_82598.c | 2 +- drivers/net/ixgbe/ixgbe_dcb_82598.h | 2 +- drivers/net/ixgbe/ixgbe_dcb_82599.c | 2 +- drivers/net/ixgbe/ixgbe_dcb_82599.h | 2 +- drivers/net/ixgbe/ixgbe_dcb_nl.c | 2 +- drivers/net/ixgbe/ixgbe_ethtool.c | 2 +- drivers/net/ixgbe/ixgbe_fcoe.c | 2 +- drivers/net/ixgbe/ixgbe_fcoe.h | 2 +- drivers/net/ixgbe/ixgbe_main.c | 4 ++-- drivers/net/ixgbe/ixgbe_phy.c | 2 +- drivers/net/ixgbe/ixgbe_phy.h | 2 +- drivers/net/ixgbe/ixgbe_type.h | 2 +- 20 files changed, 21 insertions(+), 21 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/ixgbe/Makefile b/drivers/net/ixgbe/Makefile index 21b41f42b61..bfef0ebcba9 100644 --- a/drivers/net/ixgbe/Makefile +++ b/drivers/net/ixgbe/Makefile @@ -1,7 +1,7 @@ ################################################################################ # # Intel 10 Gigabit PCI Express Linux driver -# Copyright(c) 1999 - 2009 Intel Corporation. +# Copyright(c) 1999 - 2010 Intel Corporation. # # This program is free software; you can redistribute it and/or modify it # under the terms and conditions of the GNU General Public License, diff --git a/drivers/net/ixgbe/ixgbe.h b/drivers/net/ixgbe/ixgbe.h index 8da8eb53508..303e7bd39b6 100644 --- a/drivers/net/ixgbe/ixgbe.h +++ b/drivers/net/ixgbe/ixgbe.h @@ -1,7 +1,7 @@ /******************************************************************************* Intel 10 Gigabit PCI Express Linux driver - Copyright(c) 1999 - 2009 Intel Corporation. + Copyright(c) 1999 - 2010 Intel Corporation. This program is free software; you can redistribute it and/or modify it under the terms and conditions of the GNU General Public License, diff --git a/drivers/net/ixgbe/ixgbe_82598.c b/drivers/net/ixgbe/ixgbe_82598.c index 204177d78ce..3103f416531 100644 --- a/drivers/net/ixgbe/ixgbe_82598.c +++ b/drivers/net/ixgbe/ixgbe_82598.c @@ -1,7 +1,7 @@ /******************************************************************************* Intel 10 Gigabit PCI Express Linux driver - Copyright(c) 1999 - 2009 Intel Corporation. + Copyright(c) 1999 - 2010 Intel Corporation. This program is free software; you can redistribute it and/or modify it under the terms and conditions of the GNU General Public License, diff --git a/drivers/net/ixgbe/ixgbe_82599.c b/drivers/net/ixgbe/ixgbe_82599.c index 538340527aa..b49bd6b9feb 100644 --- a/drivers/net/ixgbe/ixgbe_82599.c +++ b/drivers/net/ixgbe/ixgbe_82599.c @@ -1,7 +1,7 @@ /******************************************************************************* Intel 10 Gigabit PCI Express Linux driver - Copyright(c) 1999 - 2009 Intel Corporation. + Copyright(c) 1999 - 2010 Intel Corporation. This program is free software; you can redistribute it and/or modify it under the terms and conditions of the GNU General Public License, diff --git a/drivers/net/ixgbe/ixgbe_common.c b/drivers/net/ixgbe/ixgbe_common.c index 688b8ca5da3..21f158f79dd 100644 --- a/drivers/net/ixgbe/ixgbe_common.c +++ b/drivers/net/ixgbe/ixgbe_common.c @@ -1,7 +1,7 @@ /******************************************************************************* Intel 10 Gigabit PCI Express Linux driver - Copyright(c) 1999 - 2009 Intel Corporation. + Copyright(c) 1999 - 2010 Intel Corporation. This program is free software; you can redistribute it and/or modify it under the terms and conditions of the GNU General Public License, diff --git a/drivers/net/ixgbe/ixgbe_common.h b/drivers/net/ixgbe/ixgbe_common.h index 27f3214bed2..dfff0ffaa50 100644 --- a/drivers/net/ixgbe/ixgbe_common.h +++ b/drivers/net/ixgbe/ixgbe_common.h @@ -1,7 +1,7 @@ /******************************************************************************* Intel 10 Gigabit PCI Express Linux driver - Copyright(c) 1999 - 2009 Intel Corporation. + Copyright(c) 1999 - 2010 Intel Corporation. This program is free software; you can redistribute it and/or modify it under the terms and conditions of the GNU General Public License, diff --git a/drivers/net/ixgbe/ixgbe_dcb.c b/drivers/net/ixgbe/ixgbe_dcb.c index a1562287342..9aea4f04bbd 100644 --- a/drivers/net/ixgbe/ixgbe_dcb.c +++ b/drivers/net/ixgbe/ixgbe_dcb.c @@ -1,7 +1,7 @@ /******************************************************************************* Intel 10 Gigabit PCI Express Linux driver - Copyright(c) 1999 - 2009 Intel Corporation. + Copyright(c) 1999 - 2010 Intel Corporation. This program is free software; you can redistribute it and/or modify it under the terms and conditions of the GNU General Public License, diff --git a/drivers/net/ixgbe/ixgbe_dcb.h b/drivers/net/ixgbe/ixgbe_dcb.h index 64a9fa15c05..5caafd4afbc 100644 --- a/drivers/net/ixgbe/ixgbe_dcb.h +++ b/drivers/net/ixgbe/ixgbe_dcb.h @@ -1,7 +1,7 @@ /******************************************************************************* Intel 10 Gigabit PCI Express Linux driver - Copyright(c) 1999 - 2009 Intel Corporation. + Copyright(c) 1999 - 2010 Intel Corporation. This program is free software; you can redistribute it and/or modify it under the terms and conditions of the GNU General Public License, diff --git a/drivers/net/ixgbe/ixgbe_dcb_82598.c b/drivers/net/ixgbe/ixgbe_dcb_82598.c index f30263898eb..f0e9279d466 100644 --- a/drivers/net/ixgbe/ixgbe_dcb_82598.c +++ b/drivers/net/ixgbe/ixgbe_dcb_82598.c @@ -1,7 +1,7 @@ /******************************************************************************* Intel 10 Gigabit PCI Express Linux driver - Copyright(c) 1999 - 2009 Intel Corporation. + Copyright(c) 1999 - 2010 Intel Corporation. This program is free software; you can redistribute it and/or modify it under the terms and conditions of the GNU General Public License, diff --git a/drivers/net/ixgbe/ixgbe_dcb_82598.h b/drivers/net/ixgbe/ixgbe_dcb_82598.h index ebbe53c352a..cc728fa092e 100644 --- a/drivers/net/ixgbe/ixgbe_dcb_82598.h +++ b/drivers/net/ixgbe/ixgbe_dcb_82598.h @@ -1,7 +1,7 @@ /******************************************************************************* Intel 10 Gigabit PCI Express Linux driver - Copyright(c) 1999 - 2009 Intel Corporation. + Copyright(c) 1999 - 2010 Intel Corporation. This program is free software; you can redistribute it and/or modify it under the terms and conditions of the GNU General Public License, diff --git a/drivers/net/ixgbe/ixgbe_dcb_82599.c b/drivers/net/ixgbe/ixgbe_dcb_82599.c index ec8a252636d..4f7a26ab411 100644 --- a/drivers/net/ixgbe/ixgbe_dcb_82599.c +++ b/drivers/net/ixgbe/ixgbe_dcb_82599.c @@ -1,7 +1,7 @@ /******************************************************************************* Intel 10 Gigabit PCI Express Linux driver - Copyright(c) 1999 - 2009 Intel Corporation. + Copyright(c) 1999 - 2010 Intel Corporation. This program is free software; you can redistribute it and/or modify it under the terms and conditions of the GNU General Public License, diff --git a/drivers/net/ixgbe/ixgbe_dcb_82599.h b/drivers/net/ixgbe/ixgbe_dcb_82599.h index 9e5e2827e4a..0f3f791e1e1 100644 --- a/drivers/net/ixgbe/ixgbe_dcb_82599.h +++ b/drivers/net/ixgbe/ixgbe_dcb_82599.h @@ -1,7 +1,7 @@ /******************************************************************************* Intel 10 Gigabit PCI Express Linux driver - Copyright(c) 1999 - 2009 Intel Corporation. + Copyright(c) 1999 - 2010 Intel Corporation. This program is free software; you can redistribute it and/or modify it under the terms and conditions of the GNU General Public License, diff --git a/drivers/net/ixgbe/ixgbe_dcb_nl.c b/drivers/net/ixgbe/ixgbe_dcb_nl.c index 3c7a79a7d7c..56f37f66b69 100644 --- a/drivers/net/ixgbe/ixgbe_dcb_nl.c +++ b/drivers/net/ixgbe/ixgbe_dcb_nl.c @@ -1,7 +1,7 @@ /******************************************************************************* Intel 10 Gigabit PCI Express Linux driver - Copyright(c) 1999 - 2009 Intel Corporation. + Copyright(c) 1999 - 2010 Intel Corporation. This program is free software; you can redistribute it and/or modify it under the terms and conditions of the GNU General Public License, diff --git a/drivers/net/ixgbe/ixgbe_ethtool.c b/drivers/net/ixgbe/ixgbe_ethtool.c index 0bd49d3b9f6..d77961fc75f 100644 --- a/drivers/net/ixgbe/ixgbe_ethtool.c +++ b/drivers/net/ixgbe/ixgbe_ethtool.c @@ -1,7 +1,7 @@ /******************************************************************************* Intel 10 Gigabit PCI Express Linux driver - Copyright(c) 1999 - 2009 Intel Corporation. + Copyright(c) 1999 - 2010 Intel Corporation. This program is free software; you can redistribute it and/or modify it under the terms and conditions of the GNU General Public License, diff --git a/drivers/net/ixgbe/ixgbe_fcoe.c b/drivers/net/ixgbe/ixgbe_fcoe.c index da32a108a7b..e9a20c88c15 100644 --- a/drivers/net/ixgbe/ixgbe_fcoe.c +++ b/drivers/net/ixgbe/ixgbe_fcoe.c @@ -1,7 +1,7 @@ /******************************************************************************* Intel 10 Gigabit PCI Express Linux driver - Copyright(c) 1999 - 2009 Intel Corporation. + Copyright(c) 1999 - 2010 Intel Corporation. This program is free software; you can redistribute it and/or modify it under the terms and conditions of the GNU General Public License, diff --git a/drivers/net/ixgbe/ixgbe_fcoe.h b/drivers/net/ixgbe/ixgbe_fcoe.h index de8ff53187d..abf4b2b3f25 100644 --- a/drivers/net/ixgbe/ixgbe_fcoe.h +++ b/drivers/net/ixgbe/ixgbe_fcoe.h @@ -1,7 +1,7 @@ /******************************************************************************* Intel 10 Gigabit PCI Express Linux driver - Copyright(c) 1999 - 2009 Intel Corporation. + Copyright(c) 1999 - 2010 Intel Corporation. This program is free software; you can redistribute it and/or modify it under the terms and conditions of the GNU General Public License, diff --git a/drivers/net/ixgbe/ixgbe_main.c b/drivers/net/ixgbe/ixgbe_main.c index 385976709e7..9c9202f40b1 100644 --- a/drivers/net/ixgbe/ixgbe_main.c +++ b/drivers/net/ixgbe/ixgbe_main.c @@ -1,7 +1,7 @@ /******************************************************************************* Intel 10 Gigabit PCI Express Linux driver - Copyright(c) 1999 - 2009 Intel Corporation. + Copyright(c) 1999 - 2010 Intel Corporation. This program is free software; you can redistribute it and/or modify it under the terms and conditions of the GNU General Public License, @@ -52,7 +52,7 @@ static const char ixgbe_driver_string[] = #define DRV_VERSION "2.0.44-k2" const char ixgbe_driver_version[] = DRV_VERSION; -static char ixgbe_copyright[] = "Copyright (c) 1999-2009 Intel Corporation."; +static char ixgbe_copyright[] = "Copyright (c) 1999-2010 Intel Corporation."; static const struct ixgbe_info *ixgbe_info_tbl[] = { [board_82598] = &ixgbe_82598_info, diff --git a/drivers/net/ixgbe/ixgbe_phy.c b/drivers/net/ixgbe/ixgbe_phy.c index 9ecad17522c..1c1efd38695 100644 --- a/drivers/net/ixgbe/ixgbe_phy.c +++ b/drivers/net/ixgbe/ixgbe_phy.c @@ -1,7 +1,7 @@ /******************************************************************************* Intel 10 Gigabit PCI Express Linux driver - Copyright(c) 1999 - 2009 Intel Corporation. + Copyright(c) 1999 - 2010 Intel Corporation. This program is free software; you can redistribute it and/or modify it under the terms and conditions of the GNU General Public License, diff --git a/drivers/net/ixgbe/ixgbe_phy.h b/drivers/net/ixgbe/ixgbe_phy.h index 9b700f5bf1e..9cf5f3b4cc5 100644 --- a/drivers/net/ixgbe/ixgbe_phy.h +++ b/drivers/net/ixgbe/ixgbe_phy.h @@ -1,7 +1,7 @@ /******************************************************************************* Intel 10 Gigabit PCI Express Linux driver - Copyright(c) 1999 - 2009 Intel Corporation. + Copyright(c) 1999 - 2010 Intel Corporation. This program is free software; you can redistribute it and/or modify it under the terms and conditions of the GNU General Public License, diff --git a/drivers/net/ixgbe/ixgbe_type.h b/drivers/net/ixgbe/ixgbe_type.h index 84650c6ebe0..9eafddfa1b9 100644 --- a/drivers/net/ixgbe/ixgbe_type.h +++ b/drivers/net/ixgbe/ixgbe_type.h @@ -1,7 +1,7 @@ /******************************************************************************* Intel 10 Gigabit PCI Express Linux driver - Copyright(c) 1999 - 2009 Intel Corporation. + Copyright(c) 1999 - 2010 Intel Corporation. This program is free software; you can redistribute it and/or modify it under the terms and conditions of the GNU General Public License, -- cgit v1.2.3-70-g09d2 From fddaa1aff881c98f524221236af98ce70dcd04cf Mon Sep 17 00:00:00 2001 From: Bruce Allan Date: Wed, 13 Jan 2010 01:52:49 +0000 Subject: e1000e: MDIO slow mode should always be done for 82577 A previous 82577 workaround that set the MDIO access speed to slow mode for every PHY register read/write when the cable is unplugged should instead set the access mode to always be slow before any PHY register access. Since the mode bit gets cleared when the PHY is reset, set the mode after every PHY reset. Signed-off-by: Bruce Allan Signed-off-by: Jeff Kirsher Signed-off-by: David S. Miller --- drivers/net/e1000e/e1000.h | 1 - drivers/net/e1000e/ich8lan.c | 57 ++++++++++++++++++++++++++--- drivers/net/e1000e/phy.c | 85 -------------------------------------------- 3 files changed, 53 insertions(+), 90 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/e1000e/e1000.h b/drivers/net/e1000e/e1000.h index cebbd9079d5..d6ee28f6ea0 100644 --- a/drivers/net/e1000e/e1000.h +++ b/drivers/net/e1000e/e1000.h @@ -582,7 +582,6 @@ extern s32 e1000_read_phy_reg_hv_locked(struct e1000_hw *hw, u32 offset, extern s32 e1000_write_phy_reg_hv(struct e1000_hw *hw, u32 offset, u16 data); extern s32 e1000_write_phy_reg_hv_locked(struct e1000_hw *hw, u32 offset, u16 data); -extern s32 e1000_set_mdio_slow_mode_hv(struct e1000_hw *hw, bool slow); extern s32 e1000_link_stall_workaround_hv(struct e1000_hw *hw); extern s32 e1000_copper_link_setup_82577(struct e1000_hw *hw); extern s32 e1000_check_polarity_82577(struct e1000_hw *hw); diff --git a/drivers/net/e1000e/ich8lan.c b/drivers/net/e1000e/ich8lan.c index ad08cf3f40c..c2ea8619750 100644 --- a/drivers/net/e1000e/ich8lan.c +++ b/drivers/net/e1000e/ich8lan.c @@ -138,6 +138,10 @@ #define E1000_NVM_K1_CONFIG 0x1B /* NVM K1 Config Word */ #define E1000_NVM_K1_ENABLE 0x1 /* NVM Enable K1 bit */ +/* KMRN Mode Control */ +#define HV_KMRN_MODE_CTRL PHY_REG(769, 16) +#define HV_KMRN_MDIO_SLOW 0x0400 + /* ICH GbE Flash Hardware Sequencing Flash Status Register bit breakdown */ /* Offset 04h HSFSTS */ union ich8_hws_flash_status { @@ -219,6 +223,7 @@ static s32 e1000_set_lplu_state_pchlan(struct e1000_hw *hw, bool active); static void e1000_power_down_phy_copper_ich8lan(struct e1000_hw *hw); static void e1000_lan_init_done_ich8lan(struct e1000_hw *hw); static s32 e1000_k1_gig_workaround_hv(struct e1000_hw *hw, bool link); +static s32 e1000_set_mdio_slow_mode_hv(struct e1000_hw *hw); static inline u16 __er16flash(struct e1000_hw *hw, unsigned long reg) { @@ -270,7 +275,21 @@ static s32 e1000_init_phy_params_pchlan(struct e1000_hw *hw) phy->autoneg_mask = AUTONEG_ADVERTISE_SPEED_DEFAULT; phy->id = e1000_phy_unknown; - e1000e_get_phy_id(hw); + ret_val = e1000e_get_phy_id(hw); + if (ret_val) + goto out; + if ((phy->id == 0) || (phy->id == PHY_REVISION_MASK)) { + /* + * In case the PHY needs to be in mdio slow mode (eg. 82577), + * set slow mode and try to get the PHY id again. + */ + ret_val = e1000_set_mdio_slow_mode_hv(hw); + if (ret_val) + goto out; + ret_val = e1000e_get_phy_id(hw); + if (ret_val) + goto out; + } phy->type = e1000e_get_phy_type_from_id(phy->id); switch (phy->type) { @@ -292,6 +311,7 @@ static s32 e1000_init_phy_params_pchlan(struct e1000_hw *hw) break; } +out: return ret_val; } @@ -1075,6 +1095,26 @@ out: } +/** + * e1000_set_mdio_slow_mode_hv - Set slow MDIO access mode + * @hw: pointer to the HW structure + **/ +static s32 e1000_set_mdio_slow_mode_hv(struct e1000_hw *hw) +{ + s32 ret_val; + u16 data; + + ret_val = e1e_rphy(hw, HV_KMRN_MODE_CTRL, &data); + if (ret_val) + return ret_val; + + data |= HV_KMRN_MDIO_SLOW; + + ret_val = e1e_wphy(hw, HV_KMRN_MODE_CTRL, data); + + return ret_val; +} + /** * e1000_hv_phy_workarounds_ich8lan - A series of Phy workarounds to be * done after every PHY reset. @@ -1086,6 +1126,13 @@ static s32 e1000_hv_phy_workarounds_ich8lan(struct e1000_hw *hw) if (hw->mac.type != e1000_pchlan) return ret_val; + /* Set MDIO slow mode before any other MDIO access */ + if (hw->phy.type == e1000_phy_82577) { + ret_val = e1000_set_mdio_slow_mode_hv(hw); + if (ret_val) + goto out; + } + if (((hw->phy.type == e1000_phy_82577) && ((hw->phy.revision == 1) || (hw->phy.revision == 2))) || ((hw->phy.type == e1000_phy_82578) && (hw->phy.revision == 1))) { @@ -1184,6 +1231,7 @@ static s32 e1000_phy_hw_reset_ich8lan(struct e1000_hw *hw) /* Allow time for h/w to get to a quiescent state after reset */ mdelay(10); + /* Perform any necessary post-reset workarounds */ if (hw->mac.type == e1000_pchlan) { ret_val = e1000_hv_phy_workarounds_ich8lan(hw); if (ret_val) @@ -2484,6 +2532,10 @@ static s32 e1000_reset_hw_ich8lan(struct e1000_hw *hw) if (!ret_val) e1000_release_swflag_ich8lan(hw); + /* Perform any necessary post-reset workarounds */ + if (hw->mac.type == e1000_pchlan) + ret_val = e1000_hv_phy_workarounds_ich8lan(hw); + if (ctrl & E1000_CTRL_PHY_RST) ret_val = hw->phy.ops.get_cfg_done(hw); @@ -2528,9 +2580,6 @@ static s32 e1000_reset_hw_ich8lan(struct e1000_hw *hw) kab |= E1000_KABGTXD_BGSQLBIAS; ew32(KABGTXD, kab); - if (hw->mac.type == e1000_pchlan) - ret_val = e1000_hv_phy_workarounds_ich8lan(hw); - out: return ret_val; } diff --git a/drivers/net/e1000e/phy.c b/drivers/net/e1000e/phy.c index 55a2c0acfee..7f3ceb9dad6 100644 --- a/drivers/net/e1000e/phy.c +++ b/drivers/net/e1000e/phy.c @@ -152,32 +152,9 @@ s32 e1000e_get_phy_id(struct e1000_hw *hw) if (phy->id != 0 && phy->id != PHY_REVISION_MASK) goto out; - /* - * If the PHY ID is still unknown, we may have an 82577 - * without link. We will try again after setting Slow MDIC - * mode. No harm in trying again in this case since the PHY - * ID is unknown at this point anyway. - */ - ret_val = phy->ops.acquire(hw); - if (ret_val) - goto out; - ret_val = e1000_set_mdio_slow_mode_hv(hw, true); - if (ret_val) - goto out; - phy->ops.release(hw); - retry_count++; } out: - /* Revert to MDIO fast mode, if applicable */ - if (retry_count) { - ret_val = phy->ops.acquire(hw); - if (ret_val) - return ret_val; - ret_val = e1000_set_mdio_slow_mode_hv(hw, false); - phy->ops.release(hw); - } - return ret_val; } @@ -2790,38 +2767,6 @@ static s32 e1000_set_d0_lplu_state(struct e1000_hw *hw, bool active) return 0; } -/** - * e1000_set_mdio_slow_mode_hv - Set slow MDIO access mode - * @hw: pointer to the HW structure - * @slow: true for slow mode, false for normal mode - * - * Assumes semaphore already acquired. - **/ -s32 e1000_set_mdio_slow_mode_hv(struct e1000_hw *hw, bool slow) -{ - s32 ret_val = 0; - u16 data = 0; - - /* Set MDIO mode - page 769, register 16: 0x2580==slow, 0x2180==fast */ - hw->phy.addr = 1; - ret_val = e1000e_write_phy_reg_mdic(hw, IGP01E1000_PHY_PAGE_SELECT, - (BM_PORT_CTRL_PAGE << IGP_PAGE_SHIFT)); - if (ret_val) - goto out; - - ret_val = e1000e_write_phy_reg_mdic(hw, BM_CS_CTRL1, - (0x2180 | (slow << 10))); - if (ret_val) - goto out; - - /* dummy read when reverting to fast mode - throw away result */ - if (!slow) - ret_val = e1000e_read_phy_reg_mdic(hw, BM_CS_CTRL1, &data); - -out: - return ret_val; -} - /** * __e1000_read_phy_reg_hv - Read HV PHY register * @hw: pointer to the HW structure @@ -2839,7 +2784,6 @@ static s32 __e1000_read_phy_reg_hv(struct e1000_hw *hw, u32 offset, u16 *data, s32 ret_val; u16 page = BM_PHY_REG_PAGE(offset); u16 reg = BM_PHY_REG_NUM(offset); - bool in_slow_mode = false; if (!locked) { ret_val = hw->phy.ops.acquire(hw); @@ -2847,16 +2791,6 @@ static s32 __e1000_read_phy_reg_hv(struct e1000_hw *hw, u32 offset, u16 *data, return ret_val; } - /* Workaround failure in MDIO access while cable is disconnected */ - if ((hw->phy.type == e1000_phy_82577) && - !(er32(STATUS) & E1000_STATUS_LU)) { - ret_val = e1000_set_mdio_slow_mode_hv(hw, true); - if (ret_val) - goto out; - - in_slow_mode = true; - } - /* Page 800 works differently than the rest so it has its own func */ if (page == BM_WUC_PAGE) { ret_val = e1000_access_phy_wakeup_reg_bm(hw, offset, @@ -2893,10 +2827,6 @@ static s32 __e1000_read_phy_reg_hv(struct e1000_hw *hw, u32 offset, u16 *data, ret_val = e1000e_read_phy_reg_mdic(hw, MAX_PHY_REG_ADDRESS & reg, data); out: - /* Revert to MDIO fast mode, if applicable */ - if ((hw->phy.type == e1000_phy_82577) && in_slow_mode) - ret_val |= e1000_set_mdio_slow_mode_hv(hw, false); - if (!locked) hw->phy.ops.release(hw); @@ -2948,7 +2878,6 @@ static s32 __e1000_write_phy_reg_hv(struct e1000_hw *hw, u32 offset, u16 data, s32 ret_val; u16 page = BM_PHY_REG_PAGE(offset); u16 reg = BM_PHY_REG_NUM(offset); - bool in_slow_mode = false; if (!locked) { ret_val = hw->phy.ops.acquire(hw); @@ -2956,16 +2885,6 @@ static s32 __e1000_write_phy_reg_hv(struct e1000_hw *hw, u32 offset, u16 data, return ret_val; } - /* Workaround failure in MDIO access while cable is disconnected */ - if ((hw->phy.type == e1000_phy_82577) && - !(er32(STATUS) & E1000_STATUS_LU)) { - ret_val = e1000_set_mdio_slow_mode_hv(hw, true); - if (ret_val) - goto out; - - in_slow_mode = true; - } - /* Page 800 works differently than the rest so it has its own func */ if (page == BM_WUC_PAGE) { ret_val = e1000_access_phy_wakeup_reg_bm(hw, offset, @@ -3019,10 +2938,6 @@ static s32 __e1000_write_phy_reg_hv(struct e1000_hw *hw, u32 offset, u16 data, data); out: - /* Revert to MDIO fast mode, if applicable */ - if ((hw->phy.type == e1000_phy_82577) && in_slow_mode) - ret_val |= e1000_set_mdio_slow_mode_hv(hw, false); - if (!locked) hw->phy.ops.release(hw); -- cgit v1.2.3-70-g09d2 From baf86c9d36826fab0160251bbc87dfab3af48a21 Mon Sep 17 00:00:00 2001 From: Bruce Allan Date: Wed, 13 Jan 2010 01:53:08 +0000 Subject: e1000e: workaround link issues on busy hub in half duplex on 82577/82578 This patch removes a delay in hardware after every received packet allowing more time for transmitted packets to go out in between received packets in half duplex. Signed-off-by: Bruce Allan Signed-off-by: Jeff Kirsher Signed-off-by: David S. Miller --- drivers/net/e1000e/ich8lan.c | 19 ++++++++++++++++++- 1 file changed, 18 insertions(+), 1 deletion(-) (limited to 'drivers/net') diff --git a/drivers/net/e1000e/ich8lan.c b/drivers/net/e1000e/ich8lan.c index c2ea8619750..8b6ecd12788 100644 --- a/drivers/net/e1000e/ich8lan.c +++ b/drivers/net/e1000e/ich8lan.c @@ -1122,6 +1122,7 @@ static s32 e1000_set_mdio_slow_mode_hv(struct e1000_hw *hw) static s32 e1000_hv_phy_workarounds_ich8lan(struct e1000_hw *hw) { s32 ret_val = 0; + u16 phy_data; if (hw->mac.type != e1000_pchlan) return ret_val; @@ -1165,16 +1166,32 @@ static s32 e1000_hv_phy_workarounds_ich8lan(struct e1000_hw *hw) hw->phy.addr = 1; ret_val = e1000e_write_phy_reg_mdic(hw, IGP01E1000_PHY_PAGE_SELECT, 0); + hw->phy.ops.release(hw); if (ret_val) goto out; - hw->phy.ops.release(hw); /* * Configure the K1 Si workaround during phy reset assuming there is * link so that it disables K1 if link is in 1Gbps. */ ret_val = e1000_k1_gig_workaround_hv(hw, true); + if (ret_val) + goto out; + /* Workaround for link disconnects on a busy hub in half duplex */ + ret_val = hw->phy.ops.acquire(hw); + if (ret_val) + goto out; + ret_val = hw->phy.ops.read_reg_locked(hw, + PHY_REG(BM_PORT_CTRL_PAGE, 17), + &phy_data); + if (ret_val) + goto release; + ret_val = hw->phy.ops.write_reg_locked(hw, + PHY_REG(BM_PORT_CTRL_PAGE, 17), + phy_data & 0x00FF); +release: + hw->phy.ops.release(hw); out: return ret_val; } -- cgit v1.2.3-70-g09d2 From 55029c1d65158aea9672c5dfadb43a57f23e3100 Mon Sep 17 00:00:00 2001 From: Ben Hutchings Date: Wed, 13 Jan 2010 04:34:25 +0000 Subject: sfc: Fix polling for slow MCDI operations When the interface is down and we are using polled mode for MCDI operations, we busy-wait for completion for approximately 1 jiffy using udelay() and then back off to schedule(). But the completion will not wake the task, since we are using polled mode! We must use schedule_timeout_uninterruptible() instead. Signed-off-by: Ben Hutchings Signed-off-by: David S. Miller --- drivers/net/sfc/mcdi.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/sfc/mcdi.c b/drivers/net/sfc/mcdi.c index 683353b904c..0d4eba7266e 100644 --- a/drivers/net/sfc/mcdi.c +++ b/drivers/net/sfc/mcdi.c @@ -142,8 +142,9 @@ static int efx_mcdi_poll(struct efx_nic *efx) if (spins != 0) { --spins; udelay(1); - } else - schedule(); + } else { + schedule_timeout_uninterruptible(1); + } time = get_seconds(); -- cgit v1.2.3-70-g09d2 From f3766c26a5d00189e5c0965c66f01956d15a92d6 Mon Sep 17 00:00:00 2001 From: Ben Hutchings Date: Wed, 13 Jan 2010 10:59:13 +0000 Subject: sfc: Fix conditions for MDIO self-test The MDIO self-test should not be run on boards without an MDIO PHY, such as SFN5122F-R3 and later revisions. It should also not try to address a specific MMD in an MDIO clause 22 PHY. Check the mode_support field to decide which mode to use, if any. Signed-off-by: Ben Hutchings Signed-off-by: David S. Miller --- drivers/net/sfc/selftest.c | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/sfc/selftest.c b/drivers/net/sfc/selftest.c index af393357979..250c8827b84 100644 --- a/drivers/net/sfc/selftest.c +++ b/drivers/net/sfc/selftest.c @@ -79,10 +79,14 @@ struct efx_loopback_state { static int efx_test_mdio(struct efx_nic *efx, struct efx_self_tests *tests) { int rc = 0; - int devad = __ffs(efx->mdio.mmds); + int devad; u16 physid1, physid2; - if (efx->phy_type == PHY_TYPE_NONE) + if (efx->mdio.mode_support & MDIO_SUPPORTS_C45) + devad = __ffs(efx->mdio.mmds); + else if (efx->mdio.mode_support & MDIO_SUPPORTS_C22) + devad = MDIO_DEVAD_NONE; + else return 0; mutex_lock(&efx->mac_lock); -- cgit v1.2.3-70-g09d2 From 13fa95b0398d65885a79c6e95a09976ee9f8c009 Mon Sep 17 00:00:00 2001 From: Matt Carlson Date: Tue, 12 Jan 2010 10:11:36 +0000 Subject: tg3: Fix std prod ring nicaddr for 5787 and 57765 Commit 87668d352aa8d135bd695a050f18bbfc7b50b506, titled "tg3: Don't touch RCB nic addresses", tried to avoid assigning the nic address of the standard producer ring. Unfortunately, the default nic address is not correct for the 5787, the 5755M, or the 57765. This patch reenables the old behavior and opts out of the assignment only for the 5717. Signed-off-by: Matt Carlson Reviewed-by: Michael Chan Tested-by: Chow Loong Jin Tested-by: Dmitry Torokhov Signed-off-by: David S. Miller --- drivers/net/tg3.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/net') diff --git a/drivers/net/tg3.c b/drivers/net/tg3.c index 3a74d216859..5c77e6a4870 100644 --- a/drivers/net/tg3.c +++ b/drivers/net/tg3.c @@ -7742,7 +7742,7 @@ static int tg3_reset_hw(struct tg3 *tp, int reset_phy) ((u64) tpr->rx_std_mapping >> 32)); tw32(RCVDBDI_STD_BD + TG3_BDINFO_HOST_ADDR + TG3_64BIT_REG_LOW, ((u64) tpr->rx_std_mapping & 0xffffffff)); - if (!(tp->tg3_flags3 & TG3_FLG3_5755_PLUS)) + if (GET_ASIC_REV(tp->pci_chip_rev_id) != ASIC_REV_5717) tw32(RCVDBDI_STD_BD + TG3_BDINFO_NIC_ADDR, NIC_SRAM_RX_BUFFER_DESC); -- cgit v1.2.3-70-g09d2 From 86cfe4ff02a51294cb2c974a8bedc7f648491df9 Mon Sep 17 00:00:00 2001 From: Matt Carlson Date: Tue, 12 Jan 2010 10:11:37 +0000 Subject: tg3: Fix std rx prod ring handling There are some tg3 devices that require the driver to post new rx buffers in smaller increments. Commit 4361935afe3abc3e5a93006b99197fac1fabbd50, "tg3: Consider rx_std_prod_idx a hw mailbox" changed how the driver tracks the rx producer ring updates, but it does not make any special considerations for the above-mentioned devices. For those devices, it is possible for the driver to hit the special case path, which updates the hardware mailbox register but skips updating the shadow software mailbox member. If the special case path represents the final mailbox update for this ISR iteration, the hardware and software mailbox values will be out of sync. Ultimately, this will cause the driver to use a stale mailbox value on the next iteration, which will appear to the hardware as a large rx buffer update. Bad things ensue. The fix is to update the software shadow mailbox member when the special case path is taken. Signed-off-by: Matt Carlson Reviewed-by: Michael Chan Reported-by: Dmitry Torokhov Signed-off-by: David S. Miller --- drivers/net/tg3.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/tg3.c b/drivers/net/tg3.c index 5c77e6a4870..4e8b87d1ffa 100644 --- a/drivers/net/tg3.c +++ b/drivers/net/tg3.c @@ -4693,8 +4693,9 @@ next_pkt: (*post_ptr)++; if (unlikely(rx_std_posted >= tp->rx_std_max_post)) { - u32 idx = *post_ptr % TG3_RX_RING_SIZE; - tw32_rx_mbox(TG3_RX_STD_PROD_IDX_REG, idx); + tpr->rx_std_prod_idx = std_prod_idx % TG3_RX_RING_SIZE; + tw32_rx_mbox(TG3_RX_STD_PROD_IDX_REG, + tpr->rx_std_prod_idx); work_mask &= ~RXD_OPAQUE_RING_STD; rx_std_posted = 0; } -- cgit v1.2.3-70-g09d2 From d1ec96af77df611d1728f3bb70289f83a02df1ea Mon Sep 17 00:00:00 2001 From: Matt Carlson Date: Tue, 12 Jan 2010 10:11:38 +0000 Subject: tg3: Add reliable serdes detection for 5717 A0 The serdes status bit does not work as intended for the 5717 A0. This patch implements an alternative detection scheme that will only be valid for A0 revisions. Signed-off-by: Matt Carlson Reviewed-by: Michael Chan Signed-off-by: David S. Miller --- drivers/net/tg3.c | 9 +++++++-- drivers/net/tg3.h | 2 ++ 2 files changed, 9 insertions(+), 2 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/tg3.c b/drivers/net/tg3.c index 4e8b87d1ffa..0a632f96d16 100644 --- a/drivers/net/tg3.c +++ b/drivers/net/tg3.c @@ -1037,7 +1037,11 @@ static void tg3_mdio_start(struct tg3 *tp) else tp->phy_addr = 1; - is_serdes = tr32(SG_DIG_STATUS) & SG_DIG_IS_SERDES; + if (tp->pci_chip_rev_id != CHIPREV_ID_5717_A0) + is_serdes = tr32(SG_DIG_STATUS) & SG_DIG_IS_SERDES; + else + is_serdes = tr32(TG3_CPMU_PHY_STRAP) & + TG3_CPMU_PHY_STRAP_IS_SERDES; if (is_serdes) tp->phy_addr += 7; } else @@ -12123,7 +12127,8 @@ static void __devinit tg3_get_eeprom_hw_cfg(struct tg3 *tp) tp->phy_id = eeprom_phy_id; if (eeprom_phy_serdes) { - if (tp->tg3_flags2 & TG3_FLG2_5780_CLASS) + if ((tp->tg3_flags2 & TG3_FLG2_5780_CLASS) || + GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5717) tp->tg3_flags2 |= TG3_FLG2_MII_SERDES; else tp->tg3_flags2 |= TG3_FLG2_PHY_SERDES; diff --git a/drivers/net/tg3.h b/drivers/net/tg3.h index cd30889650f..43ed41b9f55 100644 --- a/drivers/net/tg3.h +++ b/drivers/net/tg3.h @@ -1054,6 +1054,8 @@ #define CPMU_MUTEX_REQ_DRIVER 0x00001000 #define TG3_CPMU_MUTEX_GNT 0x00003660 #define CPMU_MUTEX_GNT_DRIVER 0x00001000 +#define TG3_CPMU_PHY_STRAP 0x00003664 +#define TG3_CPMU_PHY_STRAP_IS_SERDES 0x00000020 /* 0x3664 --> 0x3800 unused */ /* Mbuf cluster free registers */ -- cgit v1.2.3-70-g09d2 From 55dffe79b34e2af98bd1315f1e00c2fc6a7a7078 Mon Sep 17 00:00:00 2001 From: Matt Carlson Date: Tue, 12 Jan 2010 10:11:39 +0000 Subject: tg3: Disable 5717 serdes and B0 support The B0 revision of the 5717 will not get enough testing by the time 2.6.33 ships. Since the kernel is already at RC3, serdes support will require too many patches to fix. For these reasons, this patch disables 5717 serdes support and will refuse to attach to all 5717 devices that are later than an A0 revision. Signed-off-by: Matt Carlson Reviewed-by: Michael Chan Signed-off-by: David S. Miller --- drivers/net/tg3.c | 5 +++++ 1 file changed, 5 insertions(+) (limited to 'drivers/net') diff --git a/drivers/net/tg3.c b/drivers/net/tg3.c index 0a632f96d16..2d1a7404057 100644 --- a/drivers/net/tg3.c +++ b/drivers/net/tg3.c @@ -13390,6 +13390,11 @@ static int __devinit tg3_get_invariants(struct tg3 *tp) if (err) return err; + if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5717 && + (tp->pci_chip_rev_id != CHIPREV_ID_5717_A0 || + (tp->tg3_flags2 & TG3_FLG2_MII_SERDES))) + return -ENOTSUPP; + /* Initialize data/descriptor byte/word swapping. */ val = tr32(GRC_MODE); val &= GRC_MODE_HOST_STACKUP; -- cgit v1.2.3-70-g09d2 From ba5b0bfa06b6fbee03c6889046e9adcefa5d2c20 Mon Sep 17 00:00:00 2001 From: Matt Carlson Date: Tue, 12 Jan 2010 10:11:40 +0000 Subject: tg3: Update copyright and driver version This patch updates the copyright notice for 2010 and updates the version number to 3.106. Signed-off-by: Matt Carlson Reviewed-by: Michael Chan Signed-off-by: David S. Miller --- drivers/net/tg3.c | 6 +++--- drivers/net/tg3.h | 1 + 2 files changed, 4 insertions(+), 3 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/tg3.c b/drivers/net/tg3.c index 2d1a7404057..7f82b0238e0 100644 --- a/drivers/net/tg3.c +++ b/drivers/net/tg3.c @@ -4,7 +4,7 @@ * Copyright (C) 2001, 2002, 2003, 2004 David S. Miller (davem@redhat.com) * Copyright (C) 2001, 2002, 2003 Jeff Garzik (jgarzik@pobox.com) * Copyright (C) 2004 Sun Microsystems Inc. - * Copyright (C) 2005-2009 Broadcom Corporation. + * Copyright (C) 2005-2010 Broadcom Corporation. * * Firmware is: * Derived from proprietary unpublished source code, @@ -68,8 +68,8 @@ #define DRV_MODULE_NAME "tg3" #define PFX DRV_MODULE_NAME ": " -#define DRV_MODULE_VERSION "3.105" -#define DRV_MODULE_RELDATE "December 2, 2009" +#define DRV_MODULE_VERSION "3.106" +#define DRV_MODULE_RELDATE "January 12, 2010" #define TG3_DEF_MAC_MODE 0 #define TG3_DEF_RX_MODE 0 diff --git a/drivers/net/tg3.h b/drivers/net/tg3.h index 43ed41b9f55..8a167912902 100644 --- a/drivers/net/tg3.h +++ b/drivers/net/tg3.h @@ -4,6 +4,7 @@ * Copyright (C) 2001, 2002, 2003, 2004 David S. Miller (davem@redhat.com) * Copyright (C) 2001 Jeff Garzik (jgarzik@pobox.com) * Copyright (C) 2004 Sun Microsystems Inc. + * Copyright (C) 2007-2010 Broadcom Corporation. */ #ifndef _T3_H -- cgit v1.2.3-70-g09d2 From a0e803a2112398150daa4d88c9d58409e0cf0b6c Mon Sep 17 00:00:00 2001 From: Samuel Ortiz Date: Wed, 13 Jan 2010 12:09:08 +0100 Subject: iwmc3200wifi: Add UMAC wifi headers to the pmkid command Without this header, we can trigger a UMAC crash with debug enabled UMACs. Signed-off-by: Samuel Ortiz Signed-off-by: John W. Linville --- drivers/net/wireless/iwmc3200wifi/commands.c | 4 ++++ drivers/net/wireless/iwmc3200wifi/commands.h | 1 + 2 files changed, 5 insertions(+) (limited to 'drivers/net') diff --git a/drivers/net/wireless/iwmc3200wifi/commands.c b/drivers/net/wireless/iwmc3200wifi/commands.c index 777584d76a8..1e41ad0fcad 100644 --- a/drivers/net/wireless/iwmc3200wifi/commands.c +++ b/drivers/net/wireless/iwmc3200wifi/commands.c @@ -973,6 +973,10 @@ int iwm_send_pmkid_update(struct iwm_priv *iwm, memset(&update, 0, sizeof(struct iwm_umac_pmkid_update)); + update.hdr.oid = UMAC_WIFI_IF_CMD_PMKID_UPDATE; + update.hdr.buf_size = cpu_to_le16(sizeof(struct iwm_umac_pmkid_update) - + sizeof(struct iwm_umac_wifi_if)); + update.command = cpu_to_le32(command); if (pmksa->bssid) memcpy(&update.bssid, pmksa->bssid, ETH_ALEN); diff --git a/drivers/net/wireless/iwmc3200wifi/commands.h b/drivers/net/wireless/iwmc3200wifi/commands.h index 06af0552cd7..3dfd9f0e900 100644 --- a/drivers/net/wireless/iwmc3200wifi/commands.h +++ b/drivers/net/wireless/iwmc3200wifi/commands.h @@ -463,6 +463,7 @@ struct iwm_umac_cmd_stop_resume_tx { #define IWM_CMD_PMKID_FLUSH 3 struct iwm_umac_pmkid_update { + struct iwm_umac_wifi_if hdr; __le32 command; u8 bssid[ETH_ALEN]; __le16 reserved; -- cgit v1.2.3-70-g09d2 From 1152dcc28c66a74b5b3f1a3ede0aa6729bfd48e4 Mon Sep 17 00:00:00 2001 From: Wey-Yi Guy Date: Fri, 15 Jan 2010 13:42:58 -0800 Subject: iwlwifi: Fix throughput stall issue in HT mode for 5000 Similar to 6000 and 1000 series, RTS/CTS is the recommended protection mechanism for 5000 series in HT mode based on the HW design. Using RTS/CTS will better protect the inner exchange from interference, especially in highly-congested environment, it also prevent uCode encounter TX FIFO underrun and other HT mode related performance issues. Signed-off-by: Wey-Yi Guy Signed-off-by: Reinette Chatre CC: stable@kernel.org Signed-off-by: John W. Linville --- drivers/net/wireless/iwlwifi/iwl-5000.c | 5 +++++ 1 file changed, 5 insertions(+) (limited to 'drivers/net') diff --git a/drivers/net/wireless/iwlwifi/iwl-5000.c b/drivers/net/wireless/iwlwifi/iwl-5000.c index 33a5866538e..de45f308b74 100644 --- a/drivers/net/wireless/iwlwifi/iwl-5000.c +++ b/drivers/net/wireless/iwlwifi/iwl-5000.c @@ -1598,6 +1598,7 @@ struct iwl_cfg iwl5300_agn_cfg = { .use_bsm = false, .ht_greenfield_support = true, .led_compensation = 51, + .use_rts_for_ht = true, /* use rts/cts protection */ .chain_noise_num_beacons = IWL_CAL_NUM_BEACONS, .sm_ps_mode = WLAN_HT_CAP_SM_PS_DISABLED, }; @@ -1622,6 +1623,7 @@ struct iwl_cfg iwl5100_bgn_cfg = { .use_bsm = false, .ht_greenfield_support = true, .led_compensation = 51, + .use_rts_for_ht = true, /* use rts/cts protection */ .chain_noise_num_beacons = IWL_CAL_NUM_BEACONS, }; @@ -1667,6 +1669,7 @@ struct iwl_cfg iwl5100_agn_cfg = { .use_bsm = false, .ht_greenfield_support = true, .led_compensation = 51, + .use_rts_for_ht = true, /* use rts/cts protection */ .chain_noise_num_beacons = IWL_CAL_NUM_BEACONS, .sm_ps_mode = WLAN_HT_CAP_SM_PS_DISABLED, }; @@ -1691,6 +1694,7 @@ struct iwl_cfg iwl5350_agn_cfg = { .use_bsm = false, .ht_greenfield_support = true, .led_compensation = 51, + .use_rts_for_ht = true, /* use rts/cts protection */ .chain_noise_num_beacons = IWL_CAL_NUM_BEACONS, .sm_ps_mode = WLAN_HT_CAP_SM_PS_DISABLED, }; @@ -1715,6 +1719,7 @@ struct iwl_cfg iwl5150_agn_cfg = { .use_bsm = false, .ht_greenfield_support = true, .led_compensation = 51, + .use_rts_for_ht = true, /* use rts/cts protection */ .chain_noise_num_beacons = IWL_CAL_NUM_BEACONS, .sm_ps_mode = WLAN_HT_CAP_SM_PS_DISABLED, }; -- cgit v1.2.3-70-g09d2 From bb5d2db5709e469f4a8c01eaaee9a275ed9772aa Mon Sep 17 00:00:00 2001 From: Reinette Chatre Date: Fri, 15 Jan 2010 13:42:59 -0800 Subject: iwlwifi: add license to tracing files Signed-off-by: Reinette Chatre Signed-off-by: John W. Linville --- drivers/net/wireless/iwlwifi/iwl-devtrace.c | 26 ++++++++++++++++++++++++++ drivers/net/wireless/iwlwifi/iwl-devtrace.h | 26 ++++++++++++++++++++++++++ 2 files changed, 52 insertions(+) (limited to 'drivers/net') diff --git a/drivers/net/wireless/iwlwifi/iwl-devtrace.c b/drivers/net/wireless/iwlwifi/iwl-devtrace.c index e7d88d1da15..83cc4e500a9 100644 --- a/drivers/net/wireless/iwlwifi/iwl-devtrace.c +++ b/drivers/net/wireless/iwlwifi/iwl-devtrace.c @@ -1,3 +1,29 @@ +/****************************************************************************** + * + * Copyright(c) 2009 - 2010 Intel Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of version 2 of the GNU General Public License as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program; if not, write to the Free Software Foundation, Inc., + * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA + * + * The full GNU General Public License is included in this distribution in the + * file called LICENSE. + * + * Contact Information: + * Intel Linux Wireless + * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 + * + *****************************************************************************/ + #include /* sparse doesn't like tracepoint macros */ diff --git a/drivers/net/wireless/iwlwifi/iwl-devtrace.h b/drivers/net/wireless/iwlwifi/iwl-devtrace.h index 21361968ab7..d9c7363b1bb 100644 --- a/drivers/net/wireless/iwlwifi/iwl-devtrace.h +++ b/drivers/net/wireless/iwlwifi/iwl-devtrace.h @@ -1,3 +1,29 @@ +/****************************************************************************** + * + * Copyright(c) 2009 - 2010 Intel Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of version 2 of the GNU General Public License as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program; if not, write to the Free Software Foundation, Inc., + * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA + * + * The full GNU General Public License is included in this distribution in the + * file called LICENSE. + * + * Contact Information: + * Intel Linux Wireless + * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 + * + *****************************************************************************/ + #if !defined(__IWLWIFI_DEVICE_TRACE) || defined(TRACE_HEADER_MULTI_READ) #define __IWLWIFI_DEVICE_TRACE -- cgit v1.2.3-70-g09d2 From f5300e04df78feae8107c1846dd3a9e27c071b2f Mon Sep 17 00:00:00 2001 From: Christian Lamparter Date: Mon, 18 Jan 2010 00:07:38 +0100 Subject: p54pci: rx frame length check A long time ago, a user reported several crashes due to data corruptions which are likely the result of a not-100%-supported, or faulty? PCI bridge. ( http://patchwork.kernel.org/patch/53004/ ) This patch fixes entry #1. "1. p54p_check_rx_ring - skb_over_panic: Under a ping flood or just left running for a bit would panic with a skb_over_panic." As described in the mail: The invalid frame length causes skb_put to bailout and trigger a crash. Note: Simply dropping the frame is problematic, because if its content contains a tx feedback we would lose some portion of the device memory space.... And the driver/mac80211 should handle all other invalid data. Reported-by: Quintin Pitts Signed-off-by: Christian Lamparter Signed-off-by: John W. Linville --- drivers/net/wireless/p54/p54pci.c | 8 ++++++++ 1 file changed, 8 insertions(+) (limited to 'drivers/net') diff --git a/drivers/net/wireless/p54/p54pci.c b/drivers/net/wireless/p54/p54pci.c index a15962a19b2..a72f7c2577d 100644 --- a/drivers/net/wireless/p54/p54pci.c +++ b/drivers/net/wireless/p54/p54pci.c @@ -197,6 +197,14 @@ static void p54p_check_rx_ring(struct ieee80211_hw *dev, u32 *index, i %= ring_limit; continue; } + + if (unlikely(len > priv->common.rx_mtu)) { + if (net_ratelimit()) + dev_err(&priv->pdev->dev, "rx'd frame size " + "exceeds length threshold.\n"); + + len = priv->common.rx_mtu; + } skb_put(skb, len); if (p54_rx(dev, skb)) { -- cgit v1.2.3-70-g09d2 From ad580db50ee8dccd069ffcd76d6f70fa6d4a62a8 Mon Sep 17 00:00:00 2001 From: Hin-Tak Leung Date: Mon, 18 Jan 2010 01:24:11 +0000 Subject: zd1211rw: adding 0409:0248 to supported device list Yasuhiro ABE reported success in sourceforge zd1211-dev list. The device is a NEC Aterm WL54GU usb wireless stick. The brand and retail product name NEC, Aterm PA-WL54GU The USB ID's (duh) ID 0409:0248 The chip ID string zd1211rw 1-1:1.0: zd1211b chip 0409:0248 v4810 high 00-1b-8b AL2230S_RF pa0 g--N- The FCC ID unknown Signed-off-by: Hin-Tak Leung Signed-off-by: Yasuhiro ABE Signed-off-by: John W. Linville --- drivers/net/wireless/zd1211rw/zd_usb.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers/net') diff --git a/drivers/net/wireless/zd1211rw/zd_usb.c b/drivers/net/wireless/zd1211rw/zd_usb.c index ac19ecd19cf..72d3e437e19 100644 --- a/drivers/net/wireless/zd1211rw/zd_usb.c +++ b/drivers/net/wireless/zd1211rw/zd_usb.c @@ -62,6 +62,7 @@ static struct usb_device_id usb_ids[] = { { USB_DEVICE(0x6891, 0xa727), .driver_info = DEVICE_ZD1211 }, /* ZD1211B */ { USB_DEVICE(0x0053, 0x5301), .driver_info = DEVICE_ZD1211B }, + { USB_DEVICE(0x0409, 0x0248), .driver_info = DEVICE_ZD1211B }, { USB_DEVICE(0x0411, 0x00da), .driver_info = DEVICE_ZD1211B }, { USB_DEVICE(0x0471, 0x1236), .driver_info = DEVICE_ZD1211B }, { USB_DEVICE(0x0471, 0x1237), .driver_info = DEVICE_ZD1211B }, -- cgit v1.2.3-70-g09d2 From 4f9c85a1b03bfa5c0a0d8488a3a7766f3c9fb756 Mon Sep 17 00:00:00 2001 From: Anton Vorontsov Date: Mon, 18 Jan 2010 05:37:16 +0000 Subject: phylib: Move workqueue initialization to a proper place commit 541cd3ee00a4fe975b22fac6a3bc846bacef37f7 ("phylib: Fix deadlock on resume") caused TI DaVinci EMAC ethernet driver to oops upon resume: PM: resume of devices complete after 237.098 msecs Restarting tasks ... done. kernel BUG at kernel/workqueue.c:354! Unable to handle kernel NULL pointer dereference at virtual address 00000000 [...] Backtrace: [] (__bug+0x0/0x2c) from [] (queue_delayed_work_on+0x74/0xf8) [] (queue_delayed_work_on+0x0/0xf8) from [] (queue_delayed_work+0x2c/0x30) The oops pops up because TI DaVinci EMAC driver detaches PHY on suspend and attaches it back on resume. Attaching makes phylib call phy_start_machine() that initializes a workqueue. On the other hand, PHY's resume routine will call phy_start_machine() again, and that will cause the oops since we just destroyed the already scheduled workqueue. This patch fixes the issue by moving workqueue initialization to phy_device_create(). p.s. We don't see this oops with ucc_geth and gianfar drivers because they perform a fine-grained suspend, i.e. they just stop the PHYs without detaching. Reported-by: Sekhar Nori Signed-off-by: Anton Vorontsov Tested-by: Sekhar Nori Signed-off-by: David S. Miller --- drivers/net/phy/phy.c | 4 +--- drivers/net/phy/phy_device.c | 1 + include/linux/phy.h | 1 + 3 files changed, 3 insertions(+), 3 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/phy/phy.c b/drivers/net/phy/phy.c index b0e9f9c5172..0295097d6c4 100644 --- a/drivers/net/phy/phy.c +++ b/drivers/net/phy/phy.c @@ -410,7 +410,6 @@ EXPORT_SYMBOL(phy_start_aneg); static void phy_change(struct work_struct *work); -static void phy_state_machine(struct work_struct *work); /** * phy_start_machine - start PHY state machine tracking @@ -430,7 +429,6 @@ void phy_start_machine(struct phy_device *phydev, { phydev->adjust_state = handler; - INIT_DELAYED_WORK(&phydev->state_queue, phy_state_machine); schedule_delayed_work(&phydev->state_queue, HZ); } @@ -761,7 +759,7 @@ EXPORT_SYMBOL(phy_start); * phy_state_machine - Handle the state machine * @work: work_struct that describes the work to be done */ -static void phy_state_machine(struct work_struct *work) +void phy_state_machine(struct work_struct *work) { struct delayed_work *dwork = to_delayed_work(work); struct phy_device *phydev = diff --git a/drivers/net/phy/phy_device.c b/drivers/net/phy/phy_device.c index 8212b2b9342..adbc0fded13 100644 --- a/drivers/net/phy/phy_device.c +++ b/drivers/net/phy/phy_device.c @@ -177,6 +177,7 @@ struct phy_device* phy_device_create(struct mii_bus *bus, int addr, int phy_id) dev->state = PHY_DOWN; mutex_init(&dev->lock); + INIT_DELAYED_WORK(&dev->state_queue, phy_state_machine); return dev; } diff --git a/include/linux/phy.h b/include/linux/phy.h index 7968defd2fa..6a7eb402165 100644 --- a/include/linux/phy.h +++ b/include/linux/phy.h @@ -485,6 +485,7 @@ void phy_driver_unregister(struct phy_driver *drv); int phy_driver_register(struct phy_driver *new_driver); void phy_prepare_link(struct phy_device *phydev, void (*adjust_link)(struct net_device *)); +void phy_state_machine(struct work_struct *work); void phy_start_machine(struct phy_device *phydev, void (*handler)(struct net_device *)); void phy_stop_machine(struct phy_device *phydev); -- cgit v1.2.3-70-g09d2 From 34692421bc7d6145ef383b014860f4fde10b7505 Mon Sep 17 00:00:00 2001 From: Jiajun Wu Date: Mon, 18 Jan 2010 05:47:50 +0000 Subject: ucc_geth: Fix full TX queue processing commit 7583605b6d29f1f7f6fc505b883328089f3485ad ("ucc_geth: Fix empty TX queue processing") fixed empty TX queue mishandling, but didn't account another corner case: when TX queue becomes full. Without this patch the driver will stop transmiting when TX queue becomes full since 'bd == ugeth->txBd[txQ]' actually checks for two things: queue empty or full. Let's better check for NULL skb, which unambiguously signals an empty queue. Signed-off-by: Jiajun Wu Signed-off-by: Anton Vorontsov Cc: Stable [2.6.32] Signed-off-by: David S. Miller --- drivers/net/ucc_geth.c | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/ucc_geth.c b/drivers/net/ucc_geth.c index 96bdc0b4388..eb8fe7e16c6 100644 --- a/drivers/net/ucc_geth.c +++ b/drivers/net/ucc_geth.c @@ -3279,13 +3279,12 @@ static int ucc_geth_tx(struct net_device *dev, u8 txQ) /* Handle the transmitted buffer and release */ /* the BD to be used with the current frame */ - if (bd == ugeth->txBd[txQ]) /* queue empty? */ + skb = ugeth->tx_skbuff[txQ][ugeth->skb_dirtytx[txQ]]; + if (!skb) break; dev->stats.tx_packets++; - skb = ugeth->tx_skbuff[txQ][ugeth->skb_dirtytx[txQ]]; - if (skb_queue_len(&ugeth->rx_recycle) < RX_BD_RING_LEN && skb_recycle_check(skb, ugeth->ug_info->uf_info.max_rx_buf_length + -- cgit v1.2.3-70-g09d2 From 357d46a17e54c9a87e0e6ef3930ff4ab2d232b81 Mon Sep 17 00:00:00 2001 From: Matthew Slattery Date: Mon, 18 Jan 2010 05:47:16 +0000 Subject: sfc: QT202x: Remove unreliable MMD check at initialisation Checking the PHY XS MMD here is unnecessary and can give false negatives. Signed-off-by: Ben Hutchings Signed-off-by: David S. Miller --- drivers/net/sfc/qt202x_phy.c | 6 ------ 1 file changed, 6 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/sfc/qt202x_phy.c b/drivers/net/sfc/qt202x_phy.c index ff8f0a417fa..e0d13a45101 100644 --- a/drivers/net/sfc/qt202x_phy.c +++ b/drivers/net/sfc/qt202x_phy.c @@ -318,12 +318,6 @@ static int qt202x_reset_phy(struct efx_nic *efx) /* Wait 250ms for the PHY to complete bootup */ msleep(250); - /* Check that all the MMDs we expect are present and responding. We - * expect faults on some if the link is down, but not on the PHY XS */ - rc = efx_mdio_check_mmds(efx, QT202X_REQUIRED_DEVS, MDIO_DEVS_PHYXS); - if (rc < 0) - goto fail; - falcon_board(efx)->type->init_phy(efx); return rc; -- cgit v1.2.3-70-g09d2 From 98f672ca9978c6e5997dbe905c91a73593148a7e Mon Sep 17 00:00:00 2001 From: Mike Frysinger Date: Mon, 18 Jan 2010 21:14:12 +0000 Subject: bfin_mac: use the newer CLKBUFOE bit name via asm/dpmc.h This driver tweaks VR_CTL, so pull in the header for the bit defines. Also switch to the new define name as the old one has gone away. Signed-off-by: Mike Frysinger Signed-off-by: David S. Miller --- drivers/net/bfin_mac.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/bfin_mac.c b/drivers/net/bfin_mac.c index 8ffea3990d0..0b23bc4f56c 100644 --- a/drivers/net/bfin_mac.c +++ b/drivers/net/bfin_mac.c @@ -33,6 +33,7 @@ #include #include +#include #include #include #include @@ -386,8 +387,8 @@ static int mii_probe(struct net_device *dev) u32 sclk, mdc_div; /* Enable PHY output early */ - if (!(bfin_read_VR_CTL() & PHYCLKOE)) - bfin_write_VR_CTL(bfin_read_VR_CTL() | PHYCLKOE); + if (!(bfin_read_VR_CTL() & CLKBUFOE)) + bfin_write_VR_CTL(bfin_read_VR_CTL() | CLKBUFOE); sclk = get_sclk(); mdc_div = ((sclk / MDC_CLK) / 2) - 1; -- cgit v1.2.3-70-g09d2 From 2d146eb172d5f754e3973a3f761f7619ebb12df9 Mon Sep 17 00:00:00 2001 From: Ram Vepa Date: Tue, 19 Jan 2010 12:36:20 -0800 Subject: S2io: two branches the same in wait_for_cmd_complete() Fix check to verify if a register bit is set. We have not hit this bug because wait_for_cmd_complete() is always called with S2IO_BIT_RESET. Reported by Roel Kluin . Signed-off-by: Ram Vepa Signed-off-by: David S. Miller --- drivers/net/s2io.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/net') diff --git a/drivers/net/s2io.c b/drivers/net/s2io.c index cc4218667cb..3c4836d0898 100644 --- a/drivers/net/s2io.c +++ b/drivers/net/s2io.c @@ -3421,7 +3421,7 @@ static int wait_for_cmd_complete(void __iomem *addr, u64 busy_bit, break; } } else { - if (!(val64 & busy_bit)) { + if (val64 & busy_bit) { ret = SUCCESS; break; } -- cgit v1.2.3-70-g09d2 From c1fa347f20f17f14a4a1575727fa24340e8a9117 Mon Sep 17 00:00:00 2001 From: Roel Kluin Date: Tue, 19 Jan 2010 14:21:45 +0000 Subject: e1000/e1000e/igb/igbvf/ixgb/ixgbe: Fix tests of unsigned in *_tx_map() The variable count and i are unsigned so the (<|>=)0 tests do not work. Signed-off-by: Roel Kluin Signed-off-by: Jeff Kirsher Signed-off-by: David S. Miller --- drivers/net/e1000/e1000_main.c | 10 +++++----- drivers/net/e1000e/netdev.c | 10 +++++----- drivers/net/igbvf/netdev.c | 10 +++++----- drivers/net/ixgb/ixgb_main.c | 10 +++++----- drivers/net/ixgbe/ixgbe_main.c | 10 +++++----- 5 files changed, 25 insertions(+), 25 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/e1000/e1000_main.c b/drivers/net/e1000/e1000_main.c index 7e855f9bbd9..b3f67b41627 100644 --- a/drivers/net/e1000/e1000_main.c +++ b/drivers/net/e1000/e1000_main.c @@ -2802,13 +2802,13 @@ static int e1000_tx_map(struct e1000_adapter *adapter, dma_error: dev_err(&pdev->dev, "TX DMA map failed\n"); buffer_info->dma = 0; - count--; - - while (count >= 0) { + if (count) count--; - i--; - if (i < 0) + + while (count--) { + if (i==0) i += tx_ring->count; + i--; buffer_info = &tx_ring->buffer_info[i]; e1000_unmap_and_free_tx_resource(adapter, buffer_info); } diff --git a/drivers/net/e1000e/netdev.c b/drivers/net/e1000e/netdev.c index c45965a256b..f91f247ed6a 100644 --- a/drivers/net/e1000e/netdev.c +++ b/drivers/net/e1000e/netdev.c @@ -3962,13 +3962,13 @@ static int e1000_tx_map(struct e1000_adapter *adapter, dma_error: dev_err(&pdev->dev, "TX DMA map failed\n"); buffer_info->dma = 0; - count--; - - while (count >= 0) { + if (count) count--; - i--; - if (i < 0) + + while (count--) { + if (i==0) i += tx_ring->count; + i--; buffer_info = &tx_ring->buffer_info[i]; e1000_put_txbuf(adapter, buffer_info);; } diff --git a/drivers/net/igbvf/netdev.c b/drivers/net/igbvf/netdev.c index 0dbd0320023..10e038adba0 100644 --- a/drivers/net/igbvf/netdev.c +++ b/drivers/net/igbvf/netdev.c @@ -2163,14 +2163,14 @@ dma_error: buffer_info->length = 0; buffer_info->next_to_watch = 0; buffer_info->mapped_as_page = false; - count--; + if (count) + count--; /* clear timestamp and dma mappings for remaining portion of packet */ - while (count >= 0) { - count--; - i--; - if (i < 0) + while (count--) { + if (i==0) i += tx_ring->count; + i--; buffer_info = &tx_ring->buffer_info[i]; igbvf_put_txbuf(adapter, buffer_info); } diff --git a/drivers/net/ixgb/ixgb_main.c b/drivers/net/ixgb/ixgb_main.c index bcd0f01d5fe..593d1a4f217 100644 --- a/drivers/net/ixgb/ixgb_main.c +++ b/drivers/net/ixgb/ixgb_main.c @@ -1363,13 +1363,13 @@ ixgb_tx_map(struct ixgb_adapter *adapter, struct sk_buff *skb, dma_error: dev_err(&pdev->dev, "TX DMA map failed\n"); buffer_info->dma = 0; - count--; - - while (count >= 0) { + if (count) count--; - i--; - if (i < 0) + + while (count--) { + if (i==0) i += tx_ring->count; + i--; buffer_info = &tx_ring->buffer_info[i]; ixgb_unmap_and_free_tx_resource(adapter, buffer_info); } diff --git a/drivers/net/ixgbe/ixgbe_main.c b/drivers/net/ixgbe/ixgbe_main.c index 9c9202f40b1..6d61add27a0 100644 --- a/drivers/net/ixgbe/ixgbe_main.c +++ b/drivers/net/ixgbe/ixgbe_main.c @@ -5167,14 +5167,14 @@ dma_error: tx_buffer_info->dma = 0; tx_buffer_info->time_stamp = 0; tx_buffer_info->next_to_watch = 0; - count--; + if (count) + count--; /* clear timestamp and dma mappings for remaining portion of packet */ - while (count >= 0) { - count--; - i--; - if (i < 0) + while (count--) { + if (i==0) i += tx_ring->count; + i--; tx_buffer_info = &tx_ring->tx_buffer_info[i]; ixgbe_unmap_and_free_tx_resource(adapter, tx_buffer_info); } -- cgit v1.2.3-70-g09d2 From 40a14deaf411592b57cb0720f0e8004293ab9865 Mon Sep 17 00:00:00 2001 From: Jesse Brandeburg Date: Tue, 19 Jan 2010 14:15:38 +0000 Subject: e1000: enhance frame fragment detection Originally From: Neil Horman Modified by: Jesse Brandeburg Hey all- A security discussion was recently given: http://events.ccc.de/congress/2009/Fahrplan//events/3596.en.html And a patch that I submitted awhile back was brought up. Apparently some of their testing revealed that they were able to force a buffer fragment in e1000 in which the trailing fragment was greater than 4 bytes. As a result the fragment check I introduced failed to detect the fragement and a partial invalid frame was passed up into the network stack. I've written this patch to correct it. I'm in the process of testing it now, but it makes good logical sense to me. Effectively it maintains a per-adapter state variable which detects a non-EOP frame, and discards it and subsequent non-EOP frames leading up to _and_ _including_ the next positive-EOP frame (as it is by definition the last fragment). This should prevent any and all partial frames from entering the network stack from e1000. Signed-off-by: Jesse Brandeburg Acked-by: Neil Horman Signed-off-by: Jeff Kirsher Signed-off-by: David S. Miller --- drivers/net/e1000/e1000.h | 2 ++ drivers/net/e1000/e1000_main.c | 13 +++++++++++-- 2 files changed, 13 insertions(+), 2 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/e1000/e1000.h b/drivers/net/e1000/e1000.h index 2a567df3ea7..e8932db7ee7 100644 --- a/drivers/net/e1000/e1000.h +++ b/drivers/net/e1000/e1000.h @@ -326,6 +326,8 @@ struct e1000_adapter { /* for ioport free */ int bars; int need_ioport; + + bool discarding; }; enum e1000_state_t { diff --git a/drivers/net/e1000/e1000_main.c b/drivers/net/e1000/e1000_main.c index b3f67b41627..a53a2017c53 100644 --- a/drivers/net/e1000/e1000_main.c +++ b/drivers/net/e1000/e1000_main.c @@ -3850,13 +3850,22 @@ static bool e1000_clean_rx_irq(struct e1000_adapter *adapter, length = le16_to_cpu(rx_desc->length); /* !EOP means multiple descriptors were used to store a single - * packet, also make sure the frame isn't just CRC only */ - if (unlikely(!(status & E1000_RXD_STAT_EOP) || (length <= 4))) { + * packet, if thats the case we need to toss it. In fact, we + * to toss every packet with the EOP bit clear and the next + * frame that _does_ have the EOP bit set, as it is by + * definition only a frame fragment + */ + if (unlikely(!(status & E1000_RXD_STAT_EOP))) + adapter->discarding = true; + + if (adapter->discarding) { /* All receives must fit into a single buffer */ E1000_DBG("%s: Receive packet consumed multiple" " buffers\n", netdev->name); /* recycle */ buffer_info->skb = skb; + if (status & E1000_RXD_STAT_EOP) + adapter->discarding = false; goto next_desc; } -- cgit v1.2.3-70-g09d2 From b94b50289622e816adc9f94111cfc2679c80177c Mon Sep 17 00:00:00 2001 From: Jesse Brandeburg Date: Tue, 19 Jan 2010 14:15:59 +0000 Subject: e1000e: enhance frame fragment detection Originally patched by Neil Horman e1000e could with a jumbo frame enabled interface, and packet split disabled, receive a packet that would overflow a single rx buffer. While in practice very hard to craft a packet that could abuse this, it is possible. this is related to CVE-2009-4538 Signed-off-by: Jesse Brandeburg CC: Neil Horman Signed-off-by: Jeff Kirsher Signed-off-by: David S. Miller --- drivers/net/e1000e/e1000.h | 1 + drivers/net/e1000e/netdev.c | 25 +++++++++++++++++++++---- 2 files changed, 22 insertions(+), 4 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/e1000e/e1000.h b/drivers/net/e1000e/e1000.h index d6ee28f6ea0..d236efaf747 100644 --- a/drivers/net/e1000e/e1000.h +++ b/drivers/net/e1000e/e1000.h @@ -421,6 +421,7 @@ struct e1000_info { /* CRC Stripping defines */ #define FLAG2_CRC_STRIPPING (1 << 0) #define FLAG2_HAS_PHY_WAKEUP (1 << 1) +#define FLAG2_IS_DISCARDING (1 << 2) #define E1000_RX_DESC_PS(R, i) \ (&(((union e1000_rx_desc_packet_split *)((R).desc))[i])) diff --git a/drivers/net/e1000e/netdev.c b/drivers/net/e1000e/netdev.c index f91f247ed6a..1ea395b6c99 100644 --- a/drivers/net/e1000e/netdev.c +++ b/drivers/net/e1000e/netdev.c @@ -450,13 +450,23 @@ static bool e1000_clean_rx_irq(struct e1000_adapter *adapter, length = le16_to_cpu(rx_desc->length); - /* !EOP means multiple descriptors were used to store a single - * packet, also make sure the frame isn't just CRC only */ - if (!(status & E1000_RXD_STAT_EOP) || (length <= 4)) { + /* + * !EOP means multiple descriptors were used to store a single + * packet, if that's the case we need to toss it. In fact, we + * need to toss every packet with the EOP bit clear and the + * next frame that _does_ have the EOP bit set, as it is by + * definition only a frame fragment + */ + if (unlikely(!(status & E1000_RXD_STAT_EOP))) + adapter->flags2 |= FLAG2_IS_DISCARDING; + + if (adapter->flags2 & FLAG2_IS_DISCARDING) { /* All receives must fit into a single buffer */ e_dbg("Receive packet consumed multiple buffers\n"); /* recycle */ buffer_info->skb = skb; + if (status & E1000_RXD_STAT_EOP) + adapter->flags2 &= ~FLAG2_IS_DISCARDING; goto next_desc; } @@ -745,10 +755,16 @@ static bool e1000_clean_rx_irq_ps(struct e1000_adapter *adapter, PCI_DMA_FROMDEVICE); buffer_info->dma = 0; - if (!(staterr & E1000_RXD_STAT_EOP)) { + /* see !EOP comment in other rx routine */ + if (!(staterr & E1000_RXD_STAT_EOP)) + adapter->flags2 |= FLAG2_IS_DISCARDING; + + if (adapter->flags2 & FLAG2_IS_DISCARDING) { e_dbg("Packet Split buffers didn't pick up the full " "packet\n"); dev_kfree_skb_irq(skb); + if (staterr & E1000_RXD_STAT_EOP) + adapter->flags2 &= ~FLAG2_IS_DISCARDING; goto next_desc; } @@ -1118,6 +1134,7 @@ static void e1000_clean_rx_ring(struct e1000_adapter *adapter) rx_ring->next_to_clean = 0; rx_ring->next_to_use = 0; + adapter->flags2 &= ~FLAG2_IS_DISCARDING; writel(0, adapter->hw.hw_addr + rx_ring->head); writel(0, adapter->hw.hw_addr + rx_ring->tail); -- cgit v1.2.3-70-g09d2 From 26d92f9276a56d55511a427fb70bd70886af647a Mon Sep 17 00:00:00 2001 From: Sathya Perla Date: Thu, 21 Jan 2010 22:52:08 -0800 Subject: be2net: fix bug in rx page posting Pages are posted to the rxq in such a way that more than one frag can share the page. The last frag that uses the page unmaps the page. In the case when a page is not fully used (due to lack of space in rxq) the last frag that uses the page is not being set as a "last_page_user"; instead, the next frag in the rxq is incorrectly being set. The fix has also been tested on ppc64 with 64k pages... Signed-off-by: Sathya Perla Signed-off-by: David S. Miller --- drivers/net/benet/be_main.c | 8 +++++--- 1 file changed, 5 insertions(+), 3 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/benet/be_main.c b/drivers/net/benet/be_main.c index 3a1f7902c16..33ab8c7f14f 100644 --- a/drivers/net/benet/be_main.c +++ b/drivers/net/benet/be_main.c @@ -910,7 +910,7 @@ static inline struct page *be_alloc_pages(u32 size) static void be_post_rx_frags(struct be_adapter *adapter) { struct be_rx_page_info *page_info_tbl = adapter->rx_obj.page_info_tbl; - struct be_rx_page_info *page_info = NULL; + struct be_rx_page_info *page_info = NULL, *prev_page_info = NULL; struct be_queue_info *rxq = &adapter->rx_obj.q; struct page *pagep = NULL; struct be_eth_rx_d *rxd; @@ -941,7 +941,6 @@ static void be_post_rx_frags(struct be_adapter *adapter) rxd = queue_head_node(rxq); rxd->fragpa_lo = cpu_to_le32(frag_dmaaddr & 0xFFFFFFFF); rxd->fragpa_hi = cpu_to_le32(upper_32_bits(frag_dmaaddr)); - queue_head_inc(rxq); /* Any space left in the current big page for another frag? */ if ((page_offset + rx_frag_size + rx_frag_size) > @@ -949,10 +948,13 @@ static void be_post_rx_frags(struct be_adapter *adapter) pagep = NULL; page_info->last_page_user = true; } + + prev_page_info = page_info; + queue_head_inc(rxq); page_info = &page_info_tbl[rxq->head]; } if (pagep) - page_info->last_page_user = true; + prev_page_info->last_page_user = true; if (posted) { atomic_add(posted, &rxq->used); -- cgit v1.2.3-70-g09d2