From ae023b2795d36f0f077e157428eb7eafa29ee412 Mon Sep 17 00:00:00 2001
From: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Date: Mon, 21 Jan 2013 13:12:57 +0200
Subject: Revert "iwlwifi: fix the reclaimed packet tracking upon flush queue"

This reverts commit f590dcec944552f9a4a61155810f3abd17d6465d
which has been reported to cause issues.

See https://lkml.org/lkml/2013/1/20/4 for further details.

Cc: stable@vger.kernel.org [3.7]
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
---
 drivers/net/wireless/iwlwifi/dvm/tx.c | 24 +++++++-----------------
 1 file changed, 7 insertions(+), 17 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/iwlwifi/dvm/tx.c b/drivers/net/wireless/iwlwifi/dvm/tx.c
index 31534f7c054..279796419ea 100644
--- a/drivers/net/wireless/iwlwifi/dvm/tx.c
+++ b/drivers/net/wireless/iwlwifi/dvm/tx.c
@@ -1153,6 +1153,13 @@ int iwlagn_rx_reply_tx(struct iwl_priv *priv, struct iwl_rx_cmd_buffer *rxb,
 			next_reclaimed = ssn;
 		}
 
+		if (tid != IWL_TID_NON_QOS) {
+			priv->tid_data[sta_id][tid].next_reclaimed =
+				next_reclaimed;
+			IWL_DEBUG_TX_REPLY(priv, "Next reclaimed packet:%d\n",
+						  next_reclaimed);
+		}
+
 		iwl_trans_reclaim(priv->trans, txq_id, ssn, &skbs);
 
 		iwlagn_check_ratid_empty(priv, sta_id, tid);
@@ -1203,28 +1210,11 @@ int iwlagn_rx_reply_tx(struct iwl_priv *priv, struct iwl_rx_cmd_buffer *rxb,
 			if (!is_agg)
 				iwlagn_non_agg_tx_status(priv, ctx, hdr->addr1);
 
-			/*
-			 * W/A for FW bug - the seq_ctl isn't updated when the
-			 * queues are flushed. Fetch it from the packet itself
-			 */
-			if (!is_agg && status == TX_STATUS_FAIL_FIFO_FLUSHED) {
-				next_reclaimed = le16_to_cpu(hdr->seq_ctrl);
-				next_reclaimed =
-					SEQ_TO_SN(next_reclaimed + 0x10);
-			}
-
 			is_offchannel_skb =
 				(info->flags & IEEE80211_TX_CTL_TX_OFFCHAN);
 			freed++;
 		}
 
-		if (tid != IWL_TID_NON_QOS) {
-			priv->tid_data[sta_id][tid].next_reclaimed =
-				next_reclaimed;
-			IWL_DEBUG_TX_REPLY(priv, "Next reclaimed packet:%d\n",
-					   next_reclaimed);
-		}
-
 		WARN_ON(!is_agg && freed != 1);
 
 		/*
-- 
cgit v1.2.3-70-g09d2


From 0e33e48ddc4402e890aaeeeacc95f730bf522098 Mon Sep 17 00:00:00 2001
From: Arend van Spriel <arend@broadcom.com>
Date: Tue, 22 Jan 2013 22:47:40 +0100
Subject: brcmsmac: fix tx status processing

This issue was reported on the wireless list (see [1]) in which
brcmsmac ran into a fatal error:

[  588.284074] brcmsmac bcma0:0: frameid != txh->TxFrameID
[  588.284098] brcmsmac bcma0:0: MI_TFS: fatal
[  588.284103] brcmsmac bcma0:0: wl0: fatal error, reinitializing
[  588.286208] ieee80211 phy0: Hardware restart was requested

The tx status feedback is processed in a loop limiting the number of
frames processed in one run. The code terminate processing when the
limit is reached regardless the txstatus value read from the device
register. When that status is is flagged as being valid it must be
processed as the hardware will clear it after is has been read.

Bisecting was done by Seth Forshee and showed following commit as the
culprit:

commit 57fe504817ccec9b6ac23e973d2925343bf1e3b6
Author: Piotr Haber <phaber@broadcom.com>
Date:   Wed Nov 28 21:44:07 2012 +0100

    brcmsmac: fix bounds checking in tx/rx

[1] http://www.spinics.net/lists/linux-wireless/msg101293.html

Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Tested-by: Seth Forshee <seth.forshee@canonical.com>
Reviewed-by: Hante Meuleman <meuleman@broadcom.com>
Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/brcm80211/brcmsmac/main.c | 25 +++++++++----------------
 1 file changed, 9 insertions(+), 16 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/brcm80211/brcmsmac/main.c b/drivers/net/wireless/brcm80211/brcmsmac/main.c
index 17594de4199..9f3d7e9f3bb 100644
--- a/drivers/net/wireless/brcm80211/brcmsmac/main.c
+++ b/drivers/net/wireless/brcm80211/brcmsmac/main.c
@@ -1027,7 +1027,6 @@ brcms_c_dotxstatus(struct brcms_c_info *wlc, struct tx_status *txs)
 static bool
 brcms_b_txstatus(struct brcms_hardware *wlc_hw, bool bound, bool *fatal)
 {
-	bool morepending = false;
 	struct bcma_device *core;
 	struct tx_status txstatus, *txs;
 	u32 s1, s2;
@@ -1041,23 +1040,20 @@ brcms_b_txstatus(struct brcms_hardware *wlc_hw, bool bound, bool *fatal)
 	txs = &txstatus;
 	core = wlc_hw->d11core;
 	*fatal = false;
-	s1 = bcma_read32(core, D11REGOFFS(frmtxstatus));
-	while (!(*fatal)
-	       && (s1 & TXS_V)) {
-		/* !give others some time to run! */
-		if (n >= max_tx_num) {
-			morepending = true;
-			break;
-		}
 
+	while (n < max_tx_num) {
+		s1 = bcma_read32(core, D11REGOFFS(frmtxstatus));
 		if (s1 == 0xffffffff) {
 			brcms_err(core, "wl%d: %s: dead chip\n", wlc_hw->unit,
 				  __func__);
 			*fatal = true;
 			return false;
 		}
-		s2 = bcma_read32(core, D11REGOFFS(frmtxstatus2));
+		/* only process when valid */
+		if (!(s1 & TXS_V))
+			break;
 
+		s2 = bcma_read32(core, D11REGOFFS(frmtxstatus2));
 		txs->status = s1 & TXS_STATUS_MASK;
 		txs->frameid = (s1 & TXS_FID_MASK) >> TXS_FID_SHIFT;
 		txs->sequence = s2 & TXS_SEQ_MASK;
@@ -1065,15 +1061,12 @@ brcms_b_txstatus(struct brcms_hardware *wlc_hw, bool bound, bool *fatal)
 		txs->lasttxtime = 0;
 
 		*fatal = brcms_c_dotxstatus(wlc_hw->wlc, txs);
-
-		s1 = bcma_read32(core, D11REGOFFS(frmtxstatus));
+		if (*fatal == true)
+			return false;
 		n++;
 	}
 
-	if (*fatal)
-		return false;
-
-	return morepending;
+	return n >= max_tx_num;
 }
 
 static void brcms_c_tbtt(struct brcms_c_info *wlc)
-- 
cgit v1.2.3-70-g09d2


From 0a06ad8e3a1cb5311b7dbafde45410aa1bce9d40 Mon Sep 17 00:00:00 2001
From: Larry Finger <Larry.Finger@lwfinger.net>
Date: Sun, 27 Jan 2013 16:24:25 -0600
Subject: rtlwifi: Fix the usage of the wrong variable in usb.c

In routine _rtl_rx_pre_process(), skb_dequeue() is called to get an skb;
however, the wrong variable name is used in subsequent calls.

Reported-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Cc: Guenter Roeck <linux@roeck-us.net>
Cc: Stable <stable@vger.kernel.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/rtlwifi/usb.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/rtlwifi/usb.c b/drivers/net/wireless/rtlwifi/usb.c
index f2ecdeb3a90..1535efda3d5 100644
--- a/drivers/net/wireless/rtlwifi/usb.c
+++ b/drivers/net/wireless/rtlwifi/usb.c
@@ -542,8 +542,8 @@ static void _rtl_rx_pre_process(struct ieee80211_hw *hw, struct sk_buff *skb)
 	WARN_ON(skb_queue_empty(&rx_queue));
 	while (!skb_queue_empty(&rx_queue)) {
 		_skb = skb_dequeue(&rx_queue);
-		_rtl_usb_rx_process_agg(hw, skb);
-		ieee80211_rx_irqsafe(hw, skb);
+		_rtl_usb_rx_process_agg(hw, _skb);
+		ieee80211_rx_irqsafe(hw, _skb);
 	}
 }
 
-- 
cgit v1.2.3-70-g09d2


From af668b3c276d0f958a3aa46ef8ec47e2d5d333b3 Mon Sep 17 00:00:00 2001
From: "Michael S. Tsirkin" <mst@redhat.com>
Date: Mon, 28 Jan 2013 00:38:02 +0000
Subject: tun: fix carrier on/off status
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

Commit c8d68e6be1c3b242f1c598595830890b65cea64a removed carrier off call
from tun_detach since it's now called on queue disable and not only on
tun close.  This confuses userspace which used this flag to detect a
free tun. To fix, put this back but under if (clean).

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Tested-by: Jason Wang <jasowang@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Tested-by: Toralf Förster <toralf.foerster@gmx.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/tun.c | 13 ++++++++-----
 1 file changed, 8 insertions(+), 5 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/tun.c b/drivers/net/tun.c
index cc09b67c23b..ffdb84474c4 100644
--- a/drivers/net/tun.c
+++ b/drivers/net/tun.c
@@ -439,10 +439,13 @@ static void __tun_detach(struct tun_file *tfile, bool clean)
 	}
 
 	if (clean) {
-		if (tun && tun->numqueues == 0 && tun->numdisabled == 0 &&
-		    !(tun->flags & TUN_PERSIST))
-			if (tun->dev->reg_state == NETREG_REGISTERED)
+		if (tun && tun->numqueues == 0 && tun->numdisabled == 0) {
+			netif_carrier_off(tun->dev);
+
+			if (!(tun->flags & TUN_PERSIST) &&
+			    tun->dev->reg_state == NETREG_REGISTERED)
 				unregister_netdevice(tun->dev);
+		}
 
 		BUG_ON(!test_bit(SOCK_EXTERNALLY_ALLOCATED,
 				 &tfile->socket.flags));
@@ -1658,10 +1661,10 @@ static int tun_set_iff(struct net *net, struct file *file, struct ifreq *ifr)
 		    device_create_file(&tun->dev->dev, &dev_attr_owner) ||
 		    device_create_file(&tun->dev->dev, &dev_attr_group))
 			pr_err("Failed to create tun sysfs files\n");
-
-		netif_carrier_on(tun->dev);
 	}
 
+	netif_carrier_on(tun->dev);
+
 	tun_debug(KERN_INFO, tun, "tun_set_iff\n");
 
 	if (ifr->ifr_flags & IFF_NO_PI)
-- 
cgit v1.2.3-70-g09d2


From 9e85722d58ca9d49d718929184492a1180bced3c Mon Sep 17 00:00:00 2001
From: Jason Wang <jasowang@redhat.com>
Date: Mon, 28 Jan 2013 01:05:19 +0000
Subject: tuntap: allow polling/writing/reading when detached

We forbid polling, writing and reading when the file were detached, this may
complex the user in several cases:

- when guest pass some buffers to vhost/qemu and then disable some queues,
  host/qemu needs to do its own cleanup on those buffers which is complex
  sometimes. We can do this simply by allowing a user can still write to an
  disabled queue. Write to an disabled queue will cause the packet pass to the
  kernel and read will get nothing.
- align the polling behavior with macvtap which never fails when the queue is
  created. This can simplify the polling errors handling of its user (e.g vhost)

We can simply achieve this by don't assign NULL to tfile->tun when detached.

Signed-off-by: Jason Wang <jasowang@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/tun.c | 25 ++++++++++++++++---------
 1 file changed, 16 insertions(+), 9 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/tun.c b/drivers/net/tun.c
index ffdb84474c4..2917a86f4c4 100644
--- a/drivers/net/tun.c
+++ b/drivers/net/tun.c
@@ -298,11 +298,12 @@ static void tun_flow_cleanup(unsigned long data)
 }
 
 static void tun_flow_update(struct tun_struct *tun, u32 rxhash,
-			    u16 queue_index)
+			    struct tun_file *tfile)
 {
 	struct hlist_head *head;
 	struct tun_flow_entry *e;
 	unsigned long delay = tun->ageing_time;
+	u16 queue_index = tfile->queue_index;
 
 	if (!rxhash)
 		return;
@@ -311,7 +312,9 @@ static void tun_flow_update(struct tun_struct *tun, u32 rxhash,
 
 	rcu_read_lock();
 
-	if (tun->numqueues == 1)
+	/* We may get a very small possibility of OOO during switching, not
+	 * worth to optimize.*/
+	if (tun->numqueues == 1 || tfile->detached)
 		goto unlock;
 
 	e = tun_flow_find(head, rxhash);
@@ -411,21 +414,21 @@ static void __tun_detach(struct tun_file *tfile, bool clean)
 
 	tun = rtnl_dereference(tfile->tun);
 
-	if (tun) {
+	if (tun && !tfile->detached) {
 		u16 index = tfile->queue_index;
 		BUG_ON(index >= tun->numqueues);
 		dev = tun->dev;
 
 		rcu_assign_pointer(tun->tfiles[index],
 				   tun->tfiles[tun->numqueues - 1]);
-		rcu_assign_pointer(tfile->tun, NULL);
 		ntfile = rtnl_dereference(tun->tfiles[index]);
 		ntfile->queue_index = index;
 
 		--tun->numqueues;
-		if (clean)
+		if (clean) {
+			rcu_assign_pointer(tfile->tun, NULL);
 			sock_put(&tfile->sk);
-		else
+		} else
 			tun_disable_queue(tun, tfile);
 
 		synchronize_net();
@@ -473,6 +476,10 @@ static void tun_detach_all(struct net_device *dev)
 		rcu_assign_pointer(tfile->tun, NULL);
 		--tun->numqueues;
 	}
+	list_for_each_entry(tfile, &tun->disabled, next) {
+		wake_up_all(&tfile->wq.wait);
+		rcu_assign_pointer(tfile->tun, NULL);
+	}
 	BUG_ON(tun->numqueues != 0);
 
 	synchronize_net();
@@ -503,7 +510,7 @@ static int tun_attach(struct tun_struct *tun, struct file *file)
 		goto out;
 
 	err = -EINVAL;
-	if (rtnl_dereference(tfile->tun))
+	if (rtnl_dereference(tfile->tun) && !tfile->detached)
 		goto out;
 
 	err = -EBUSY;
@@ -1202,7 +1209,7 @@ static ssize_t tun_get_user(struct tun_struct *tun, struct tun_file *tfile,
 	tun->dev->stats.rx_packets++;
 	tun->dev->stats.rx_bytes += len;
 
-	tun_flow_update(tun, rxhash, tfile->queue_index);
+	tun_flow_update(tun, rxhash, tfile);
 	return total_len;
 }
 
@@ -1816,7 +1823,7 @@ static int tun_set_queue(struct file *file, struct ifreq *ifr)
 		ret = tun_attach(tun, file);
 	} else if (ifr->ifr_flags & IFF_DETACH_QUEUE) {
 		tun = rtnl_dereference(tfile->tun);
-		if (!tun || !(tun->flags & TUN_TAP_MQ))
+		if (!tun || !(tun->flags & TUN_TAP_MQ) || tfile->detached)
 			ret = -EINVAL;
 		else
 			__tun_detach(tfile, false);
-- 
cgit v1.2.3-70-g09d2


From 00d3d51e9d8c983e237236a41863d138b7f77ff6 Mon Sep 17 00:00:00 2001
From: Sarveshwar Bandi <sarveshwar.bandi@emulex.com>
Date: Mon, 28 Jan 2013 04:17:01 +0000
Subject: be2net: Updating Module Author string and log message string to
 "Emulex Corporation"

Signed-off-by: Sarveshwar Bandi <sarveshwar.bandi@emulex.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/ethernet/emulex/benet/be.h      | 8 ++++----
 drivers/net/ethernet/emulex/benet/be_main.c | 2 +-
 2 files changed, 5 insertions(+), 5 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/ethernet/emulex/benet/be.h b/drivers/net/ethernet/emulex/benet/be.h
index 4eba17b83ba..f1b3df167ff 100644
--- a/drivers/net/ethernet/emulex/benet/be.h
+++ b/drivers/net/ethernet/emulex/benet/be.h
@@ -36,13 +36,13 @@
 
 #define DRV_VER			"4.4.161.0u"
 #define DRV_NAME		"be2net"
-#define BE_NAME			"ServerEngines BladeEngine2 10Gbps NIC"
-#define BE3_NAME		"ServerEngines BladeEngine3 10Gbps NIC"
-#define OC_NAME			"Emulex OneConnect 10Gbps NIC"
+#define BE_NAME			"Emulex BladeEngine2"
+#define BE3_NAME		"Emulex BladeEngine3"
+#define OC_NAME			"Emulex OneConnect"
 #define OC_NAME_BE		OC_NAME	"(be3)"
 #define OC_NAME_LANCER		OC_NAME "(Lancer)"
 #define OC_NAME_SH		OC_NAME "(Skyhawk)"
-#define DRV_DESC		"ServerEngines BladeEngine 10Gbps NIC Driver"
+#define DRV_DESC		"Emulex OneConnect 10Gbps NIC Driver"
 
 #define BE_VENDOR_ID 		0x19a2
 #define EMULEX_VENDOR_ID	0x10df
diff --git a/drivers/net/ethernet/emulex/benet/be_main.c b/drivers/net/ethernet/emulex/benet/be_main.c
index 5c995700e53..4d6f3c54427 100644
--- a/drivers/net/ethernet/emulex/benet/be_main.c
+++ b/drivers/net/ethernet/emulex/benet/be_main.c
@@ -25,7 +25,7 @@
 MODULE_VERSION(DRV_VER);
 MODULE_DEVICE_TABLE(pci, be_dev_ids);
 MODULE_DESCRIPTION(DRV_DESC " " DRV_VER);
-MODULE_AUTHOR("ServerEngines Corporation");
+MODULE_AUTHOR("Emulex Corporation");
 MODULE_LICENSE("GPL");
 
 static unsigned int num_vfs;
-- 
cgit v1.2.3-70-g09d2


From eb492f7443206711406a7c78cc12dee43e551f0c Mon Sep 17 00:00:00 2001
From: Milos Vyletel <milos.vyletel@sde.cz>
Date: Tue, 29 Jan 2013 09:59:00 +0000
Subject: bonding: unset primary slave via sysfs

When bonding module is loaded with primary parameter and one decides to unset
primary slave using sysfs these settings are not preserved during bond device
restart. Primary slave is only unset once and it's not remembered in
bond->params structure. Below is example of recreation.

 grep OPTS /etc/sysconfig/network-scripts/ifcfg-bond0
BONDING_OPTS="mode=active-backup miimon=100 primary=eth01"
 grep "Primary Slave" /proc/net/bonding/bond0
Primary Slave: eth01 (primary_reselect always)

 echo "" > /sys/class/net/bond0/bonding/primary
 grep "Primary Slave" /proc/net/bonding/bond0
Primary Slave: None

 sed -i -e 's/primary=eth01//' /etc/sysconfig/network-scripts/ifcfg-bond0
 grep OPTS /etc/sysconfig/network-scripts/ifcfg-bond
BONDING_OPTS="mode=active-backup miimon=100 "
 ifdown bond0 && ifup bond0

without patch:
 grep "Primary Slave" /proc/net/bonding/bond0
Primary Slave: eth01 (primary_reselect always)

with patch:
 grep "Primary Slave" /proc/net/bonding/bond0
Primary Slave: None

Reviewed-by: Jiri Pirko <jiri@resnulli.us>
Signed-off-by: Milos Vyletel <milos.vyletel@sde.cz>
Signed-off-by: Jay Vosburgh <fubar@us.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/bonding/bond_sysfs.c | 1 +
 1 file changed, 1 insertion(+)

(limited to 'drivers/net')

diff --git a/drivers/net/bonding/bond_sysfs.c b/drivers/net/bonding/bond_sysfs.c
index 1877ed7ca08..1c9e09fbdff 100644
--- a/drivers/net/bonding/bond_sysfs.c
+++ b/drivers/net/bonding/bond_sysfs.c
@@ -1053,6 +1053,7 @@ static ssize_t bonding_store_primary(struct device *d,
 		pr_info("%s: Setting primary slave to None.\n",
 			bond->dev->name);
 		bond->primary_slave = NULL;
+		memset(bond->params.primary, 0, sizeof(bond->params.primary));
 		bond_select_active_slave(bond);
 		goto out;
 	}
-- 
cgit v1.2.3-70-g09d2


From 286003048aaef49b26bb9d93611dc69085e8982e Mon Sep 17 00:00:00 2001
From: Bruce Allan <bruce.w.allan@intel.com>
Date: Mon, 28 Jan 2013 00:43:48 +0000
Subject: e1000e: enable ECC on I217/I218 to catch packet buffer memory errors

In rare instances, memory errors have been detected in the internal packet
buffer memory on I217/I218 when stressed under certain environmental
conditions.  Enable Error Correcting Code (ECC) in hardware to catch both
correctable and uncorrectable errors.  Correctable errors will be handled
by the hardware.  Uncorrectable errors in the packet buffer will cause the
packet to be received with an error indication in the buffer descriptor
causing the packet to be discarded.  If the uncorrectable error is in the
descriptor itself, the hardware will stop and interrupt the driver
indicating the error.  The driver will then reset the hardware in order to
clear the error and restart.

Both types of errors will be accounted for in statistics counters.

Signed-off-by: Bruce Allan <bruce.w.allan@intel.com>
Cc: <stable@vger.kernel.org> # 3.5.x & 3.6.x
Tested-by: Jeff Pieper <jeffrey.e.pieper@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/ethernet/intel/e1000e/defines.h |  9 ++++++
 drivers/net/ethernet/intel/e1000e/e1000.h   |  2 ++
 drivers/net/ethernet/intel/e1000e/ethtool.c |  2 ++
 drivers/net/ethernet/intel/e1000e/hw.h      |  1 +
 drivers/net/ethernet/intel/e1000e/ich8lan.c | 11 +++++++
 drivers/net/ethernet/intel/e1000e/netdev.c  | 46 +++++++++++++++++++++++++++++
 6 files changed, 71 insertions(+)

(limited to 'drivers/net')

diff --git a/drivers/net/ethernet/intel/e1000e/defines.h b/drivers/net/ethernet/intel/e1000e/defines.h
index 02a12b69555..4dab6fc265a 100644
--- a/drivers/net/ethernet/intel/e1000e/defines.h
+++ b/drivers/net/ethernet/intel/e1000e/defines.h
@@ -232,6 +232,7 @@
 #define E1000_CTRL_FRCDPX   0x00001000  /* Force Duplex */
 #define E1000_CTRL_LANPHYPC_OVERRIDE 0x00010000 /* SW control of LANPHYPC */
 #define E1000_CTRL_LANPHYPC_VALUE    0x00020000 /* SW value of LANPHYPC */
+#define E1000_CTRL_MEHE     0x00080000  /* Memory Error Handling Enable */
 #define E1000_CTRL_SWDPIN0  0x00040000  /* SWDPIN 0 value */
 #define E1000_CTRL_SWDPIN1  0x00080000  /* SWDPIN 1 value */
 #define E1000_CTRL_SWDPIO0  0x00400000  /* SWDPIN 0 Input or output */
@@ -389,6 +390,12 @@
 
 #define E1000_PBS_16K E1000_PBA_16K
 
+/* Uncorrectable/correctable ECC Error counts and enable bits */
+#define E1000_PBECCSTS_CORR_ERR_CNT_MASK	0x000000FF
+#define E1000_PBECCSTS_UNCORR_ERR_CNT_MASK	0x0000FF00
+#define E1000_PBECCSTS_UNCORR_ERR_CNT_SHIFT	8
+#define E1000_PBECCSTS_ECC_ENABLE		0x00010000
+
 #define IFS_MAX       80
 #define IFS_MIN       40
 #define IFS_RATIO     4
@@ -408,6 +415,7 @@
 #define E1000_ICR_RXSEQ         0x00000008 /* Rx sequence error */
 #define E1000_ICR_RXDMT0        0x00000010 /* Rx desc min. threshold (0) */
 #define E1000_ICR_RXT0          0x00000080 /* Rx timer intr (ring 0) */
+#define E1000_ICR_ECCER         0x00400000 /* Uncorrectable ECC Error */
 #define E1000_ICR_INT_ASSERTED  0x80000000 /* If this bit asserted, the driver should claim the interrupt */
 #define E1000_ICR_RXQ0          0x00100000 /* Rx Queue 0 Interrupt */
 #define E1000_ICR_RXQ1          0x00200000 /* Rx Queue 1 Interrupt */
@@ -443,6 +451,7 @@
 #define E1000_IMS_RXSEQ     E1000_ICR_RXSEQ     /* Rx sequence error */
 #define E1000_IMS_RXDMT0    E1000_ICR_RXDMT0    /* Rx desc min. threshold */
 #define E1000_IMS_RXT0      E1000_ICR_RXT0      /* Rx timer intr */
+#define E1000_IMS_ECCER     E1000_ICR_ECCER     /* Uncorrectable ECC Error */
 #define E1000_IMS_RXQ0      E1000_ICR_RXQ0      /* Rx Queue 0 Interrupt */
 #define E1000_IMS_RXQ1      E1000_ICR_RXQ1      /* Rx Queue 1 Interrupt */
 #define E1000_IMS_TXQ0      E1000_ICR_TXQ0      /* Tx Queue 0 Interrupt */
diff --git a/drivers/net/ethernet/intel/e1000e/e1000.h b/drivers/net/ethernet/intel/e1000e/e1000.h
index 6782a2eea1b..7e95f221d60 100644
--- a/drivers/net/ethernet/intel/e1000e/e1000.h
+++ b/drivers/net/ethernet/intel/e1000e/e1000.h
@@ -309,6 +309,8 @@ struct e1000_adapter {
 
 	struct napi_struct napi;
 
+	unsigned int uncorr_errors;	/* uncorrectable ECC errors */
+	unsigned int corr_errors;	/* correctable ECC errors */
 	unsigned int restart_queue;
 	u32 txd_cmd;
 
diff --git a/drivers/net/ethernet/intel/e1000e/ethtool.c b/drivers/net/ethernet/intel/e1000e/ethtool.c
index f95bc6ee1c2..fd4772a2691 100644
--- a/drivers/net/ethernet/intel/e1000e/ethtool.c
+++ b/drivers/net/ethernet/intel/e1000e/ethtool.c
@@ -108,6 +108,8 @@ static const struct e1000_stats e1000_gstrings_stats[] = {
 	E1000_STAT("dropped_smbus", stats.mgpdc),
 	E1000_STAT("rx_dma_failed", rx_dma_failed),
 	E1000_STAT("tx_dma_failed", tx_dma_failed),
+	E1000_STAT("uncorr_ecc_errors", uncorr_errors),
+	E1000_STAT("corr_ecc_errors", corr_errors),
 };
 
 #define E1000_GLOBAL_STATS_LEN	ARRAY_SIZE(e1000_gstrings_stats)
diff --git a/drivers/net/ethernet/intel/e1000e/hw.h b/drivers/net/ethernet/intel/e1000e/hw.h
index cf217777586..b88676ff3d8 100644
--- a/drivers/net/ethernet/intel/e1000e/hw.h
+++ b/drivers/net/ethernet/intel/e1000e/hw.h
@@ -77,6 +77,7 @@ enum e1e_registers {
 #define E1000_POEMB	E1000_PHY_CTRL	/* PHY OEM Bits */
 	E1000_PBA      = 0x01000, /* Packet Buffer Allocation - RW */
 	E1000_PBS      = 0x01008, /* Packet Buffer Size */
+	E1000_PBECCSTS = 0x0100C, /* Packet Buffer ECC Status - RW */
 	E1000_EEMNGCTL = 0x01010, /* MNG EEprom Control */
 	E1000_EEWR     = 0x0102C, /* EEPROM Write Register - RW */
 	E1000_FLOP     = 0x0103C, /* FLASH Opcode Register */
diff --git a/drivers/net/ethernet/intel/e1000e/ich8lan.c b/drivers/net/ethernet/intel/e1000e/ich8lan.c
index 97633654760..24d9f61956f 100644
--- a/drivers/net/ethernet/intel/e1000e/ich8lan.c
+++ b/drivers/net/ethernet/intel/e1000e/ich8lan.c
@@ -3624,6 +3624,17 @@ static void e1000_initialize_hw_bits_ich8lan(struct e1000_hw *hw)
 	if (hw->mac.type == e1000_ich8lan)
 		reg |= (E1000_RFCTL_IPV6_EX_DIS | E1000_RFCTL_NEW_IPV6_EXT_DIS);
 	ew32(RFCTL, reg);
+
+	/* Enable ECC on Lynxpoint */
+	if (hw->mac.type == e1000_pch_lpt) {
+		reg = er32(PBECCSTS);
+		reg |= E1000_PBECCSTS_ECC_ENABLE;
+		ew32(PBECCSTS, reg);
+
+		reg = er32(CTRL);
+		reg |= E1000_CTRL_MEHE;
+		ew32(CTRL, reg);
+	}
 }
 
 /**
diff --git a/drivers/net/ethernet/intel/e1000e/netdev.c b/drivers/net/ethernet/intel/e1000e/netdev.c
index fbf75fdca99..643c883dd79 100644
--- a/drivers/net/ethernet/intel/e1000e/netdev.c
+++ b/drivers/net/ethernet/intel/e1000e/netdev.c
@@ -1678,6 +1678,23 @@ static irqreturn_t e1000_intr_msi(int irq, void *data)
 			mod_timer(&adapter->watchdog_timer, jiffies + 1);
 	}
 
+	/* Reset on uncorrectable ECC error */
+	if ((icr & E1000_ICR_ECCER) && (hw->mac.type == e1000_pch_lpt)) {
+		u32 pbeccsts = er32(PBECCSTS);
+
+		adapter->corr_errors +=
+		    pbeccsts & E1000_PBECCSTS_CORR_ERR_CNT_MASK;
+		adapter->uncorr_errors +=
+		    (pbeccsts & E1000_PBECCSTS_UNCORR_ERR_CNT_MASK) >>
+		    E1000_PBECCSTS_UNCORR_ERR_CNT_SHIFT;
+
+		/* Do the reset outside of interrupt context */
+		schedule_work(&adapter->reset_task);
+
+		/* return immediately since reset is imminent */
+		return IRQ_HANDLED;
+	}
+
 	if (napi_schedule_prep(&adapter->napi)) {
 		adapter->total_tx_bytes = 0;
 		adapter->total_tx_packets = 0;
@@ -1741,6 +1758,23 @@ static irqreturn_t e1000_intr(int irq, void *data)
 			mod_timer(&adapter->watchdog_timer, jiffies + 1);
 	}
 
+	/* Reset on uncorrectable ECC error */
+	if ((icr & E1000_ICR_ECCER) && (hw->mac.type == e1000_pch_lpt)) {
+		u32 pbeccsts = er32(PBECCSTS);
+
+		adapter->corr_errors +=
+		    pbeccsts & E1000_PBECCSTS_CORR_ERR_CNT_MASK;
+		adapter->uncorr_errors +=
+		    (pbeccsts & E1000_PBECCSTS_UNCORR_ERR_CNT_MASK) >>
+		    E1000_PBECCSTS_UNCORR_ERR_CNT_SHIFT;
+
+		/* Do the reset outside of interrupt context */
+		schedule_work(&adapter->reset_task);
+
+		/* return immediately since reset is imminent */
+		return IRQ_HANDLED;
+	}
+
 	if (napi_schedule_prep(&adapter->napi)) {
 		adapter->total_tx_bytes = 0;
 		adapter->total_tx_packets = 0;
@@ -2104,6 +2138,8 @@ static void e1000_irq_enable(struct e1000_adapter *adapter)
 	if (adapter->msix_entries) {
 		ew32(EIAC_82574, adapter->eiac_mask & E1000_EIAC_MASK_82574);
 		ew32(IMS, adapter->eiac_mask | E1000_IMS_OTHER | E1000_IMS_LSC);
+	} else if (hw->mac.type == e1000_pch_lpt) {
+		ew32(IMS, IMS_ENABLE_MASK | E1000_IMS_ECCER);
 	} else {
 		ew32(IMS, IMS_ENABLE_MASK);
 	}
@@ -4251,6 +4287,16 @@ static void e1000e_update_stats(struct e1000_adapter *adapter)
 	adapter->stats.mgptc += er32(MGTPTC);
 	adapter->stats.mgprc += er32(MGTPRC);
 	adapter->stats.mgpdc += er32(MGTPDC);
+
+	/* Correctable ECC Errors */
+	if (hw->mac.type == e1000_pch_lpt) {
+		u32 pbeccsts = er32(PBECCSTS);
+		adapter->corr_errors +=
+		    pbeccsts & E1000_PBECCSTS_CORR_ERR_CNT_MASK;
+		adapter->uncorr_errors +=
+		    (pbeccsts & E1000_PBECCSTS_UNCORR_ERR_CNT_MASK) >>
+		    E1000_PBECCSTS_UNCORR_ERR_CNT_SHIFT;
+	}
 }
 
 /**
-- 
cgit v1.2.3-70-g09d2


From 6cdd20c380eb62eab757c5a6ccc90dac7ecd774b Mon Sep 17 00:00:00 2001
From: Neil Horman <nhorman@tuxdriver.com>
Date: Tue, 29 Jan 2013 16:15:45 -0500
Subject: vmxnet3: set carrier state properly on probe

vmxnet3 fails to set netif_carrier_off on probe, meaning that when an interface
is opened the __LINK_STATE_NOCARRIER bit is already cleared, and so
/sys/class/net/<ifname>/operstate remains in the unknown state.  Correct this by
setting netif_carrier_off on probe, like other drivers do.

Also, while we're at it, lets remove the netif_carrier_ok checks from the
link_state_update function, as that check is atomically contained within the
netif_carrier_[on|off] functions anyway

Tested successfully by myself

Signed-off-by: Neil Horman <nhorman@tuxdriver.com>
CC: "David S. Miller" <davem@davemloft.net>
CC: "VMware, Inc." <pv-drivers@vmware.com>
CC: Ben Hutchings <bhutchings@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/vmxnet3/vmxnet3_drv.c | 7 +++----
 1 file changed, 3 insertions(+), 4 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/vmxnet3/vmxnet3_drv.c b/drivers/net/vmxnet3/vmxnet3_drv.c
index dc8913c6238..12c6440d164 100644
--- a/drivers/net/vmxnet3/vmxnet3_drv.c
+++ b/drivers/net/vmxnet3/vmxnet3_drv.c
@@ -154,8 +154,7 @@ vmxnet3_check_link(struct vmxnet3_adapter *adapter, bool affectTxQueue)
 	if (ret & 1) { /* Link is up. */
 		printk(KERN_INFO "%s: NIC Link is Up %d Mbps\n",
 		       adapter->netdev->name, adapter->link_speed);
-		if (!netif_carrier_ok(adapter->netdev))
-			netif_carrier_on(adapter->netdev);
+		netif_carrier_on(adapter->netdev);
 
 		if (affectTxQueue) {
 			for (i = 0; i < adapter->num_tx_queues; i++)
@@ -165,8 +164,7 @@ vmxnet3_check_link(struct vmxnet3_adapter *adapter, bool affectTxQueue)
 	} else {
 		printk(KERN_INFO "%s: NIC Link is Down\n",
 		       adapter->netdev->name);
-		if (netif_carrier_ok(adapter->netdev))
-			netif_carrier_off(adapter->netdev);
+		netif_carrier_off(adapter->netdev);
 
 		if (affectTxQueue) {
 			for (i = 0; i < adapter->num_tx_queues; i++)
@@ -3061,6 +3059,7 @@ vmxnet3_probe_device(struct pci_dev *pdev,
 	netif_set_real_num_tx_queues(adapter->netdev, adapter->num_tx_queues);
 	netif_set_real_num_rx_queues(adapter->netdev, adapter->num_rx_queues);
 
+	netif_carrier_off(netdev);
 	err = register_netdev(netdev);
 
 	if (err) {
-- 
cgit v1.2.3-70-g09d2


From 8a7d7cbf7b5ff9912ef50b3e94c9ad9f37b1c75f Mon Sep 17 00:00:00 2001
From: Bing Zhao <bzhao@marvell.com>
Date: Tue, 29 Jan 2013 14:38:02 -0800
Subject: mwifiex: fix incomplete scan in case of IE parsing error

A scan request is split into multiple scan commands queued in
scan_pending_q. Each scan command will be sent to firmware and
its response is handlded one after another.

If any error is detected while parsing IE in command response
buffer the remaining data will be ignored and error is returned.

We should check if there is any more scan commands pending in
the queue before returning error. This ensures that we will call
cfg80211_scan_done if this is the last scan command, or send
next scan command in scan_pending_q to firmware.

Cc: "3.6+" <stable@vger.kernel.org>
Signed-off-by: Bing Zhao <bzhao@marvell.com>
Signed-off-by: Amitkumar Karwar <akarwar@marvell.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/mwifiex/scan.c | 9 +++++----
 1 file changed, 5 insertions(+), 4 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/mwifiex/scan.c b/drivers/net/wireless/mwifiex/scan.c
index 9189a32b784..973a9d90e9e 100644
--- a/drivers/net/wireless/mwifiex/scan.c
+++ b/drivers/net/wireless/mwifiex/scan.c
@@ -1563,7 +1563,7 @@ int mwifiex_ret_802_11_scan(struct mwifiex_private *priv,
 		dev_err(adapter->dev, "SCAN_RESP: too many AP returned (%d)\n",
 			scan_rsp->number_of_sets);
 		ret = -1;
-		goto done;
+		goto check_next_scan;
 	}
 
 	bytes_left = le16_to_cpu(scan_rsp->bss_descript_size);
@@ -1634,7 +1634,8 @@ int mwifiex_ret_802_11_scan(struct mwifiex_private *priv,
 		if (!beacon_size || beacon_size > bytes_left) {
 			bss_info += bytes_left;
 			bytes_left = 0;
-			return -1;
+			ret = -1;
+			goto check_next_scan;
 		}
 
 		/* Initialize the current working beacon pointer for this BSS
@@ -1690,7 +1691,7 @@ int mwifiex_ret_802_11_scan(struct mwifiex_private *priv,
 				dev_err(priv->adapter->dev,
 					"%s: bytes left < IE length\n",
 					__func__);
-				goto done;
+				goto check_next_scan;
 			}
 			if (element_id == WLAN_EID_DS_PARAMS) {
 				channel = *(current_ptr + sizeof(struct ieee_types_header));
@@ -1753,6 +1754,7 @@ int mwifiex_ret_802_11_scan(struct mwifiex_private *priv,
 		}
 	}
 
+check_next_scan:
 	spin_lock_irqsave(&adapter->scan_pending_q_lock, flags);
 	if (list_empty(&adapter->scan_pending_q)) {
 		spin_unlock_irqrestore(&adapter->scan_pending_q_lock, flags);
@@ -1813,7 +1815,6 @@ int mwifiex_ret_802_11_scan(struct mwifiex_private *priv,
 		}
 	}
 
-done:
 	return ret;
 }
 
-- 
cgit v1.2.3-70-g09d2


From 70c37bf97f2a91accba76080db69144f3b69f736 Mon Sep 17 00:00:00 2001
From: Bjørn Mork <bjorn@mork.no>
Date: Mon, 28 Jan 2013 23:51:28 +0000
Subject: net: usbnet: prevent buggy devices from killing us
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

A device sending 0 length frames as fast as it can has been
observed killing the host system due to the resulting memory
pressure.

Temporarily disable RX skb allocation and URB submission when
the current error ratio is high, preventing us from trying to
allocate an infinite number of skbs.  Reenable as soon as we
are finished processing the done queue, allowing the device
to continue working after short error bursts.

Signed-off-by: Bjørn Mork <bjorn@mork.no>
Acked-by: Oliver Neukum <oneukum@suse.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/usb/usbnet.c   | 25 +++++++++++++++++++++++++
 include/linux/usb/usbnet.h |  2 ++
 2 files changed, 27 insertions(+)

(limited to 'drivers/net')

diff --git a/drivers/net/usb/usbnet.c b/drivers/net/usb/usbnet.c
index f34b2ebee81..97783772572 100644
--- a/drivers/net/usb/usbnet.c
+++ b/drivers/net/usb/usbnet.c
@@ -380,6 +380,12 @@ static int rx_submit (struct usbnet *dev, struct urb *urb, gfp_t flags)
 	unsigned long		lockflags;
 	size_t			size = dev->rx_urb_size;
 
+	/* prevent rx skb allocation when error ratio is high */
+	if (test_bit(EVENT_RX_KILL, &dev->flags)) {
+		usb_free_urb(urb);
+		return -ENOLINK;
+	}
+
 	skb = __netdev_alloc_skb_ip_align(dev->net, size, flags);
 	if (!skb) {
 		netif_dbg(dev, rx_err, dev->net, "no rx skb\n");
@@ -539,6 +545,17 @@ block:
 		break;
 	}
 
+	/* stop rx if packet error rate is high */
+	if (++dev->pkt_cnt > 30) {
+		dev->pkt_cnt = 0;
+		dev->pkt_err = 0;
+	} else {
+		if (state == rx_cleanup)
+			dev->pkt_err++;
+		if (dev->pkt_err > 20)
+			set_bit(EVENT_RX_KILL, &dev->flags);
+	}
+
 	state = defer_bh(dev, skb, &dev->rxq, state);
 
 	if (urb) {
@@ -791,6 +808,11 @@ int usbnet_open (struct net_device *net)
 		   (dev->driver_info->flags & FLAG_FRAMING_AX) ? "ASIX" :
 		   "simple");
 
+	/* reset rx error state */
+	dev->pkt_cnt = 0;
+	dev->pkt_err = 0;
+	clear_bit(EVENT_RX_KILL, &dev->flags);
+
 	// delay posting reads until we're fully open
 	tasklet_schedule (&dev->bh);
 	if (info->manage_power) {
@@ -1254,6 +1276,9 @@ static void usbnet_bh (unsigned long param)
 		}
 	}
 
+	/* restart RX again after disabling due to high error rate */
+	clear_bit(EVENT_RX_KILL, &dev->flags);
+
 	// waiting for all pending urbs to complete?
 	if (dev->wait) {
 		if ((dev->txq.qlen + dev->rxq.qlen + dev->done.qlen) == 0) {
diff --git a/include/linux/usb/usbnet.h b/include/linux/usb/usbnet.h
index 5de7a220e98..0de078d4cdb 100644
--- a/include/linux/usb/usbnet.h
+++ b/include/linux/usb/usbnet.h
@@ -33,6 +33,7 @@ struct usbnet {
 	wait_queue_head_t	*wait;
 	struct mutex		phy_mutex;
 	unsigned char		suspend_count;
+	unsigned char		pkt_cnt, pkt_err;
 
 	/* i/o info: pipes etc */
 	unsigned		in, out;
@@ -70,6 +71,7 @@ struct usbnet {
 #		define EVENT_DEV_OPEN	7
 #		define EVENT_DEVICE_REPORT_IDLE	8
 #		define EVENT_NO_RUNTIME_PM	9
+#		define EVENT_RX_KILL	10
 };
 
 static inline struct usb_driver *driver_of(struct usb_interface *intf)
-- 
cgit v1.2.3-70-g09d2


From 3d6d7ab5881b1d4431529410b949ba2e946f3b0f Mon Sep 17 00:00:00 2001
From: Daniele Palmas <dnlplm@gmail.com>
Date: Wed, 30 Jan 2013 02:47:06 +0000
Subject: NET: qmi_wwan: add Telit LE920 support
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

Add VID, PID and fixed interface for Telit LE920

Signed-off-by: Daniele Palmas <dnlplm@gmail.com>
Acked-by: Bjørn Mork <bjorn@mork.no>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/usb/qmi_wwan.c | 1 +
 1 file changed, 1 insertion(+)

(limited to 'drivers/net')

diff --git a/drivers/net/usb/qmi_wwan.c b/drivers/net/usb/qmi_wwan.c
index 575a5839ee3..2ca7f8ea2dc 100644
--- a/drivers/net/usb/qmi_wwan.c
+++ b/drivers/net/usb/qmi_wwan.c
@@ -461,6 +461,7 @@ static const struct usb_device_id products[] = {
 	{QMI_FIXED_INTF(0x1199, 0x901c, 8)},    /* Sierra Wireless EM7700 */
 	{QMI_FIXED_INTF(0x1bbb, 0x011e, 4)},	/* Telekom Speedstick LTE II (Alcatel One Touch L100V LTE) */
 	{QMI_FIXED_INTF(0x2357, 0x0201, 4)},	/* TP-LINK HSUPA Modem MA180 */
+	{QMI_FIXED_INTF(0x1bc7, 0x1200, 5)},	/* Telit LE920 */
 
 	/* 4. Gobi 1000 devices */
 	{QMI_GOBI1K_DEVICE(0x05c6, 0x9212)},	/* Acer Gobi Modem Device */
-- 
cgit v1.2.3-70-g09d2


From 2bd3bc4e8472424f1a6009825397639a8968920a Mon Sep 17 00:00:00 2001
From: Alexander Stein <alexander.stein@systec-electronic.com>
Date: Thu, 13 Dec 2012 10:06:10 +0100
Subject: can: c_can: Set reserved bit in IFx_MASK2 to 1 on write

According to C_CAN documentation, the reserved bit in IFx_MASK2 register is
fixed 1.

Cc: linux-stable <stable@vger.kernel.org>
Signed-off-by: Alexander Stein <alexander.stein@systec-electronic.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
---
 drivers/net/can/c_can/c_can.c | 6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)

(limited to 'drivers/net')

diff --git a/drivers/net/can/c_can/c_can.c b/drivers/net/can/c_can/c_can.c
index 58607f196c9..2282b1ae976 100644
--- a/drivers/net/can/c_can/c_can.c
+++ b/drivers/net/can/c_can/c_can.c
@@ -488,8 +488,12 @@ static void c_can_setup_receive_object(struct net_device *dev, int iface,
 
 	priv->write_reg(priv, C_CAN_IFACE(MASK1_REG, iface),
 			IFX_WRITE_LOW_16BIT(mask));
+
+	/* According to C_CAN documentation, the reserved bit
+	 * in IFx_MASK2 register is fixed 1
+	 */
 	priv->write_reg(priv, C_CAN_IFACE(MASK2_REG, iface),
-			IFX_WRITE_HIGH_16BIT(mask));
+			IFX_WRITE_HIGH_16BIT(mask) | BIT(13));
 
 	priv->write_reg(priv, C_CAN_IFACE(ARB1_REG, iface),
 			IFX_WRITE_LOW_16BIT(id));
-- 
cgit v1.2.3-70-g09d2


From 559bcac35facfed49ab4f408e162971612dcfdf3 Mon Sep 17 00:00:00 2001
From: "David S. Miller" <davem@davemloft.net>
Date: Tue, 29 Jan 2013 22:58:04 -0500
Subject: via-rhine: Fix bugs in NAPI support.

1) rhine_tx() should use dev_kfree_skb() not dev_kfree_skb_irq()

2) rhine_slow_event_task's NAPI triggering logic is racey, it
   should just hit the interrupt mask register.  This is the
   same as commit 7dbb491878a2c51d372a8890fa45a8ff80358af1
   ("r8169: avoid NAPI scheduling delay.") made to fix the same
   problem in the r8169 driver.  From Francois Romieu.

Reported-by: Jamie Gloudon <jamie.gloudon@gmail.com>
Tested-by: Jamie Gloudon <jamie.gloudon@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/ethernet/via/via-rhine.c | 8 ++------
 1 file changed, 2 insertions(+), 6 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/ethernet/via/via-rhine.c b/drivers/net/ethernet/via/via-rhine.c
index 7992b3e05d3..78ace59efd2 100644
--- a/drivers/net/ethernet/via/via-rhine.c
+++ b/drivers/net/ethernet/via/via-rhine.c
@@ -1801,7 +1801,7 @@ static void rhine_tx(struct net_device *dev)
 					 rp->tx_skbuff[entry]->len,
 					 PCI_DMA_TODEVICE);
 		}
-		dev_kfree_skb_irq(rp->tx_skbuff[entry]);
+		dev_kfree_skb(rp->tx_skbuff[entry]);
 		rp->tx_skbuff[entry] = NULL;
 		entry = (++rp->dirty_tx) % TX_RING_SIZE;
 	}
@@ -2010,11 +2010,7 @@ static void rhine_slow_event_task(struct work_struct *work)
 	if (intr_status & IntrPCIErr)
 		netif_warn(rp, hw, dev, "PCI error\n");
 
-	napi_disable(&rp->napi);
-	rhine_irq_disable(rp);
-	/* Slow and safe. Consider __napi_schedule as a replacement ? */
-	napi_enable(&rp->napi);
-	napi_schedule(&rp->napi);
+	iowrite16(RHINE_EVENT & 0xffff, rp->base + IntrEnable);
 
 out_unlock:
 	mutex_unlock(&rp->task_lock);
-- 
cgit v1.2.3-70-g09d2


From bf414b369f158bb527f9f29174ada815f961b44c Mon Sep 17 00:00:00 2001
From: Bjørn Mork <bjorn@mork.no>
Date: Thu, 31 Jan 2013 08:36:05 +0000
Subject: net: usbnet: fix tx_dropped statistics
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

It is normal for minidrivers accumulating frames to return NULL
from their tx_fixup function. We do not want to count this as a
drop, or log any debug messages.  A different exit path is
therefore chosen for such drivers, skipping the debug message
and the tx_dropped increment.

The test for accumulating drivers was however completely bogus,
making the exit path selection depend on whether the user had
enabled tx_err logging or not. This would arbitrarily mess up
accounting for both accumulating and non-accumulating minidrivers,
and would result in unwanted debug messages for the accumulating
drivers.

Fix by testing for FLAG_MULTI_PACKET instead, which probably was
the intention from the beginning.  This usage match the documented
behaviour of this flag:

 Indicates to usbnet, that USB driver accumulates multiple IP packets.
 Affects statistic (counters) and short packet handling.

Signed-off-by: Bjørn Mork <bjorn@mork.no>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/usb/usbnet.c | 10 ++++------
 1 file changed, 4 insertions(+), 6 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/usb/usbnet.c b/drivers/net/usb/usbnet.c
index 97783772572..5e33606c136 100644
--- a/drivers/net/usb/usbnet.c
+++ b/drivers/net/usb/usbnet.c
@@ -1125,13 +1125,11 @@ netdev_tx_t usbnet_start_xmit (struct sk_buff *skb,
 	if (info->tx_fixup) {
 		skb = info->tx_fixup (dev, skb, GFP_ATOMIC);
 		if (!skb) {
-			if (netif_msg_tx_err(dev)) {
-				netif_dbg(dev, tx_err, dev->net, "can't tx_fixup skb\n");
-				goto drop;
-			} else {
-				/* cdc_ncm collected packet; waits for more */
+			/* packet collected; minidriver waiting for more */
+			if (info->flags & FLAG_MULTI_PACKET)
 				goto not_drop;
-			}
+			netif_dbg(dev, tx_err, dev->net, "can't tx_fixup skb\n");
+			goto drop;
 		}
 	}
 	length = skb->len;
-- 
cgit v1.2.3-70-g09d2


From a5ffbe0a1993a27072742ef7db6cf9839956fce9 Mon Sep 17 00:00:00 2001
From: Larry Finger <Larry.Finger@lwfinger.net>
Date: Sat, 2 Feb 2013 15:55:00 -0600
Subject: rtlwifi: Fix scheduling while atomic bug

Kernel commits 41affd5 and 6539306 changed the locking in rtl_lps_leave()
from a spinlock to a mutex by doing the calls indirectly from a work queue
to reduce the time that interrupts were disabled. This change was fine for
most systems; however a scheduling while atomic bug was reported in
https://bugzilla.redhat.com/show_bug.cgi?id=903881. The backtrace indicates
that routine rtl_is_special(), which calls rtl_lps_leave() in three places
was entered in atomic context. These direct calls are replaced by putting a
request on the appropriate work queue.

Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Reported-and-tested-by: Nathaniel Doherty <ntdoherty@gmail.com>
Cc: Nathaniel Doherty <ntdoherty@gmail.com>
Cc: Stanislaw Gruszka <sgruszka@redhat.com>
Cc: Stable <stable@vger.kernel.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/rtlwifi/base.c | 7 ++++---
 1 file changed, 4 insertions(+), 3 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/rtlwifi/base.c b/drivers/net/wireless/rtlwifi/base.c
index 4494d130b37..0f8b05185ed 100644
--- a/drivers/net/wireless/rtlwifi/base.c
+++ b/drivers/net/wireless/rtlwifi/base.c
@@ -1004,7 +1004,8 @@ u8 rtl_is_special_data(struct ieee80211_hw *hw, struct sk_buff *skb, u8 is_tx)
 					 is_tx ? "Tx" : "Rx");
 
 				if (is_tx) {
-					rtl_lps_leave(hw);
+					schedule_work(&rtlpriv->
+						      works.lps_leave_work);
 					ppsc->last_delaylps_stamp_jiffies =
 					    jiffies;
 				}
@@ -1014,7 +1015,7 @@ u8 rtl_is_special_data(struct ieee80211_hw *hw, struct sk_buff *skb, u8 is_tx)
 		}
 	} else if (ETH_P_ARP == ether_type) {
 		if (is_tx) {
-			rtl_lps_leave(hw);
+			schedule_work(&rtlpriv->works.lps_leave_work);
 			ppsc->last_delaylps_stamp_jiffies = jiffies;
 		}
 
@@ -1024,7 +1025,7 @@ u8 rtl_is_special_data(struct ieee80211_hw *hw, struct sk_buff *skb, u8 is_tx)
 			 "802.1X %s EAPOL pkt!!\n", is_tx ? "Tx" : "Rx");
 
 		if (is_tx) {
-			rtl_lps_leave(hw);
+			schedule_work(&rtlpriv->works.lps_leave_work);
 			ppsc->last_delaylps_stamp_jiffies = jiffies;
 		}
 
-- 
cgit v1.2.3-70-g09d2


From 7b2385b95363c9ff49801c19cba2489a05bd6672 Mon Sep 17 00:00:00 2001
From: Arend van Spriel <arend@broadcom.com>
Date: Sat, 2 Feb 2013 14:36:50 +0100
Subject: brcmsmac: rework of mac80211 .flush() callback operation
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

This patch addresses a long standing issue of the driver with the
mac80211 .flush() callback. Since implementing the .flush() callback
a number of issues have been fixed, but a WARN_ON_ONCE() was still
triggered because the timeout on the flush could still occur.

This patch changes the awkward design using msleep() into one using
a waitqueue. The waiting flush() context will kick the transmit dma
when it is idle and the timeout used waiting for the event is set
to 500 ms. Worst case there can be 64 frames outstanding for transmit
in the driver. At a rate of 1Mbps that would take 1.5 seconds assuming
MTU is 1500 bytes and ignoring retries. The WARN_ON_ONCE() is also
removed as this was put in to indicate the flush timeout as a reason
for the driver to stall. That was not happening since fixing endless
AMPDU retries with following upstream commit:

commit 85091fc0a75653e239dc8379658515e577544927
Author: Arend van Spriel <arend@broadcom.com>
Date:   Thu Feb 23 18:38:22 2012 +0100

    brcm80211: smac: fix endless retry of A-MPDU transmissions

bugzilla: 42840 <https://bugzilla.kernel.org/show_bug.cgi?id=42840>
bugzilla@redhat: <https://bugzilla.redhat.com/show_bug.cgi?id=799168>
bugzilla@redhat: <https://bugzilla.redhat.com/show_bug.cgi?id=787649>

Cc: Jonathan Nieder <jrnieder@gmail.com>
Cc: Stanislaw Gruszka <sgruszka@redhat.com>
Cc: Camaleón <noelamac@gmail.com>
Cc: Milan Bouchet-Valat <nalimilan@club-internet.fr>
Cc: Seth Forshee <seth.forshee@canonical.com>
Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
Reviewed-by: Hante Meuleman <meuleman@broadcom.com>
Reviewed-by: Piotr Haber <phaber@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Acked-by: Seth Forshee <seth.forshee@canonical.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 .../net/wireless/brcm80211/brcmsmac/mac80211_if.c  | 35 +++++++++++++---------
 .../net/wireless/brcm80211/brcmsmac/mac80211_if.h  |  3 +-
 drivers/net/wireless/brcm80211/brcmsmac/main.c     | 15 ++--------
 drivers/net/wireless/brcm80211/brcmsmac/pub.h      |  3 +-
 4 files changed, 27 insertions(+), 29 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/brcm80211/brcmsmac/mac80211_if.c b/drivers/net/wireless/brcm80211/brcmsmac/mac80211_if.c
index 0f71d1d4339..e5fd20994be 100644
--- a/drivers/net/wireless/brcm80211/brcmsmac/mac80211_if.c
+++ b/drivers/net/wireless/brcm80211/brcmsmac/mac80211_if.c
@@ -36,6 +36,7 @@
 #include "debug.h"
 
 #define N_TX_QUEUES	4 /* #tx queues on mac80211<->driver interface */
+#define BRCMS_FLUSH_TIMEOUT	500 /* msec */
 
 /* Flags we support */
 #define MAC_FILTERS (FIF_PROMISC_IN_BSS | \
@@ -708,16 +709,29 @@ static void brcms_ops_rfkill_poll(struct ieee80211_hw *hw)
 	wiphy_rfkill_set_hw_state(wl->pub->ieee_hw->wiphy, blocked);
 }
 
+static bool brcms_tx_flush_completed(struct brcms_info *wl)
+{
+	bool result;
+
+	spin_lock_bh(&wl->lock);
+	result = brcms_c_tx_flush_completed(wl->wlc);
+	spin_unlock_bh(&wl->lock);
+	return result;
+}
+
 static void brcms_ops_flush(struct ieee80211_hw *hw, bool drop)
 {
 	struct brcms_info *wl = hw->priv;
+	int ret;
 
 	no_printk("%s: drop = %s\n", __func__, drop ? "true" : "false");
 
-	/* wait for packet queue and dma fifos to run empty */
-	spin_lock_bh(&wl->lock);
-	brcms_c_wait_for_tx_completion(wl->wlc, drop);
-	spin_unlock_bh(&wl->lock);
+	ret = wait_event_timeout(wl->tx_flush_wq,
+				 brcms_tx_flush_completed(wl),
+				 msecs_to_jiffies(BRCMS_FLUSH_TIMEOUT));
+
+	brcms_dbg_mac80211(wl->wlc->hw->d11core,
+			   "ret=%d\n", jiffies_to_msecs(ret));
 }
 
 static const struct ieee80211_ops brcms_ops = {
@@ -772,6 +786,7 @@ void brcms_dpc(unsigned long data)
 
  done:
 	spin_unlock_bh(&wl->lock);
+	wake_up(&wl->tx_flush_wq);
 }
 
 /*
@@ -1020,6 +1035,8 @@ static struct brcms_info *brcms_attach(struct bcma_device *pdev)
 
 	atomic_set(&wl->callbacks, 0);
 
+	init_waitqueue_head(&wl->tx_flush_wq);
+
 	/* setup the bottom half handler */
 	tasklet_init(&wl->tasklet, brcms_dpc, (unsigned long) wl);
 
@@ -1609,13 +1626,3 @@ bool brcms_rfkill_set_hw_state(struct brcms_info *wl)
 	spin_lock_bh(&wl->lock);
 	return blocked;
 }
-
-/*
- * precondition: perimeter lock has been acquired
- */
-void brcms_msleep(struct brcms_info *wl, uint ms)
-{
-	spin_unlock_bh(&wl->lock);
-	msleep(ms);
-	spin_lock_bh(&wl->lock);
-}
diff --git a/drivers/net/wireless/brcm80211/brcmsmac/mac80211_if.h b/drivers/net/wireless/brcm80211/brcmsmac/mac80211_if.h
index 9358bd5ebd3..947ccacf43e 100644
--- a/drivers/net/wireless/brcm80211/brcmsmac/mac80211_if.h
+++ b/drivers/net/wireless/brcm80211/brcmsmac/mac80211_if.h
@@ -68,6 +68,8 @@ struct brcms_info {
 	spinlock_t lock;	/* per-device perimeter lock */
 	spinlock_t isr_lock;	/* per-device ISR synchronization lock */
 
+	/* tx flush */
+	wait_queue_head_t tx_flush_wq;
 
 	/* timer related fields */
 	atomic_t callbacks;	/* # outstanding callback functions */
@@ -100,7 +102,6 @@ extern struct brcms_timer *brcms_init_timer(struct brcms_info *wl,
 extern void brcms_free_timer(struct brcms_timer *timer);
 extern void brcms_add_timer(struct brcms_timer *timer, uint ms, int periodic);
 extern bool brcms_del_timer(struct brcms_timer *timer);
-extern void brcms_msleep(struct brcms_info *wl, uint ms);
 extern void brcms_dpc(unsigned long data);
 extern void brcms_timer(struct brcms_timer *t);
 extern void brcms_fatal_error(struct brcms_info *wl);
diff --git a/drivers/net/wireless/brcm80211/brcmsmac/main.c b/drivers/net/wireless/brcm80211/brcmsmac/main.c
index 9f3d7e9f3bb..8b5839008af 100644
--- a/drivers/net/wireless/brcm80211/brcmsmac/main.c
+++ b/drivers/net/wireless/brcm80211/brcmsmac/main.c
@@ -7511,25 +7511,16 @@ int brcms_c_get_curband(struct brcms_c_info *wlc)
 	return wlc->band->bandunit;
 }
 
-void brcms_c_wait_for_tx_completion(struct brcms_c_info *wlc, bool drop)
+bool brcms_c_tx_flush_completed(struct brcms_c_info *wlc)
 {
-	int timeout = 20;
 	int i;
 
 	/* Kick DMA to send any pending AMPDU */
 	for (i = 0; i < ARRAY_SIZE(wlc->hw->di); i++)
 		if (wlc->hw->di[i])
-			dma_txflush(wlc->hw->di[i]);
+			dma_kick_tx(wlc->hw->di[i]);
 
-	/* wait for queue and DMA fifos to run dry */
-	while (brcms_txpktpendtot(wlc) > 0) {
-		brcms_msleep(wlc->wl, 1);
-
-		if (--timeout == 0)
-			break;
-	}
-
-	WARN_ON_ONCE(timeout == 0);
+	return !brcms_txpktpendtot(wlc);
 }
 
 void brcms_c_set_beacon_listen_interval(struct brcms_c_info *wlc, u8 interval)
diff --git a/drivers/net/wireless/brcm80211/brcmsmac/pub.h b/drivers/net/wireless/brcm80211/brcmsmac/pub.h
index 4fb2834f4e6..b0f14b7b861 100644
--- a/drivers/net/wireless/brcm80211/brcmsmac/pub.h
+++ b/drivers/net/wireless/brcm80211/brcmsmac/pub.h
@@ -314,8 +314,6 @@ extern void brcms_c_associate_upd(struct brcms_c_info *wlc, bool state);
 extern void brcms_c_scan_start(struct brcms_c_info *wlc);
 extern void brcms_c_scan_stop(struct brcms_c_info *wlc);
 extern int brcms_c_get_curband(struct brcms_c_info *wlc);
-extern void brcms_c_wait_for_tx_completion(struct brcms_c_info *wlc,
-					   bool drop);
 extern int brcms_c_set_channel(struct brcms_c_info *wlc, u16 channel);
 extern int brcms_c_set_rate_limit(struct brcms_c_info *wlc, u16 srl, u16 lrl);
 extern void brcms_c_get_current_rateset(struct brcms_c_info *wlc,
@@ -332,5 +330,6 @@ extern int brcms_c_set_tx_power(struct brcms_c_info *wlc, int txpwr);
 extern int brcms_c_get_tx_power(struct brcms_c_info *wlc);
 extern bool brcms_c_check_radio_disabled(struct brcms_c_info *wlc);
 extern void brcms_c_mute(struct brcms_c_info *wlc, bool on);
+extern bool brcms_c_tx_flush_completed(struct brcms_c_info *wlc);
 
 #endif				/* _BRCM_PUB_H_ */
-- 
cgit v1.2.3-70-g09d2


From f97b4b5d46d586782b40c8ced81bf9763c18e7cc Mon Sep 17 00:00:00 2001
From: Or Gerlitz <ogerlitz@mellanox.com>
Date: Thu, 10 Jan 2013 15:18:35 +0000
Subject: mlx4_core: Fix advertisement of wrong PF context behaviour

Commit 08ff32352d6f ("mlx4: 64-byte CQE/EQE support") introduced a
regression where older guest VF drivers failed to load even when
64-byte EQEs/CQEs are disabled, since the PF wrongly advertises the
new context behaviour anyway.  The failure looks like:

    mlx4_core 0000:00:07.0: Unknown pf context behaviour
    mlx4_core 0000:00:07.0: Failed to obtain slave caps
    mlx4_core: probe of 0000:00:07.0 failed with error -38

Fix this by basing this advertisement on dev->caps.flags, which is the
operational capabilities used by the QUERY_FUNC_CAP command wrapper
(dev_cap->flags holds the firmware capabilities).

Reported-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
---
 drivers/net/ethernet/mellanox/mlx4/main.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'drivers/net')

diff --git a/drivers/net/ethernet/mellanox/mlx4/main.c b/drivers/net/ethernet/mellanox/mlx4/main.c
index e1bafffbc3b..9a84c75e9e3 100644
--- a/drivers/net/ethernet/mellanox/mlx4/main.c
+++ b/drivers/net/ethernet/mellanox/mlx4/main.c
@@ -380,7 +380,7 @@ static int mlx4_dev_cap(struct mlx4_dev *dev, struct mlx4_dev_cap *dev_cap)
 		}
 	}
 
-	if ((dev_cap->flags &
+	if ((dev->caps.flags &
 	    (MLX4_DEV_CAP_FLAG_64B_CQE | MLX4_DEV_CAP_FLAG_64B_EQE)) &&
 	    mlx4_is_master(dev))
 		dev->caps.function_caps |= MLX4_FUNC_CAP_64B_EQE_CQE;
-- 
cgit v1.2.3-70-g09d2


From 96316c595697ae9a2a90badd6f00035f2f384773 Mon Sep 17 00:00:00 2001
From: Bjørn Mork <bjorn@mork.no>
Date: Wed, 6 Feb 2013 05:21:53 +0000
Subject: net: cdc_ncm: add another Huawei vendor specific device
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

Adding a new vendor specific class/subclass/protocol combination
for CDC NCM devices based on information from a GPLed out-of-tree
driver from Huawei.

Signed-off-by: Bjørn Mork <bjorn@mork.no>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/usb/cdc_ncm.c | 3 +++
 1 file changed, 3 insertions(+)

(limited to 'drivers/net')

diff --git a/drivers/net/usb/cdc_ncm.c b/drivers/net/usb/cdc_ncm.c
index 9197b2c72ca..00d3b2d3782 100644
--- a/drivers/net/usb/cdc_ncm.c
+++ b/drivers/net/usb/cdc_ncm.c
@@ -1215,6 +1215,9 @@ static const struct usb_device_id cdc_devs[] = {
 	{ USB_VENDOR_AND_INTERFACE_INFO(0x12d1, 0xff, 0x02, 0x46),
 	  .driver_info = (unsigned long)&wwan_info,
 	},
+	{ USB_VENDOR_AND_INTERFACE_INFO(0x12d1, 0xff, 0x02, 0x76),
+	  .driver_info = (unsigned long)&wwan_info,
+	},
 
 	/* Infineon(now Intel) HSPA Modem platform */
 	{ USB_DEVICE_AND_INTERFACE_INFO(0x1519, 0x0443,
-- 
cgit v1.2.3-70-g09d2


From e21b9d031fa184632c373eedc12e3c296e1aa65b Mon Sep 17 00:00:00 2001
From: Bjørn Mork <bjorn@mork.no>
Date: Wed, 6 Feb 2013 05:22:08 +0000
Subject: net: qmi_wwan: add more Huawei devices, including E320
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

Adding new class/subclass/protocol combinations based on the GPLed
out-of-tree Huawei driver. One of these has already appeared on a
device labelled as "E320".

Signed-off-by: Bjørn Mork <bjorn@mork.no>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/usb/qmi_wwan.c | 12 ++++++++++++
 1 file changed, 12 insertions(+)

(limited to 'drivers/net')

diff --git a/drivers/net/usb/qmi_wwan.c b/drivers/net/usb/qmi_wwan.c
index 2ca7f8ea2dc..c8e05e27f38 100644
--- a/drivers/net/usb/qmi_wwan.c
+++ b/drivers/net/usb/qmi_wwan.c
@@ -351,6 +351,10 @@ static const struct usb_device_id products[] = {
 		USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, USB_CLASS_VENDOR_SPEC, 1, 57),
 		.driver_info        = (unsigned long)&qmi_wwan_info,
 	},
+	{	/* HUAWEI_INTERFACE_NDIS_CONTROL_QUALCOMM */
+		USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, USB_CLASS_VENDOR_SPEC, 0x01, 0x69),
+		.driver_info        = (unsigned long)&qmi_wwan_info,
+	},
 
 	/* 2. Combined interface devices matching on class+protocol */
 	{	/* Huawei E367 and possibly others in "Windows mode" */
@@ -361,6 +365,14 @@ static const struct usb_device_id products[] = {
 		USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, USB_CLASS_VENDOR_SPEC, 1, 17),
 		.driver_info        = (unsigned long)&qmi_wwan_info,
 	},
+	{	/* HUAWEI_NDIS_SINGLE_INTERFACE_VDF */
+		USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, USB_CLASS_VENDOR_SPEC, 0x01, 0x37),
+		.driver_info        = (unsigned long)&qmi_wwan_info,
+	},
+	{	/* HUAWEI_INTERFACE_NDIS_HW_QUALCOMM */
+		USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, USB_CLASS_VENDOR_SPEC, 0x01, 0x67),
+		.driver_info        = (unsigned long)&qmi_wwan_info,
+	},
 	{	/* Pantech UML290, P4200 and more */
 		USB_VENDOR_AND_INTERFACE_INFO(0x106c, USB_CLASS_VENDOR_SPEC, 0xf0, 0xff),
 		.driver_info        = (unsigned long)&qmi_wwan_info,
-- 
cgit v1.2.3-70-g09d2


From 48856286b64e4b66ec62b94e504d0b29c1ade664 Mon Sep 17 00:00:00 2001
From: Ian Campbell <Ian.Campbell@citrix.com>
Date: Wed, 6 Feb 2013 23:41:35 +0000
Subject: xen/netback: shutdown the ring if it contains garbage.

A buggy or malicious frontend should not be able to confuse netback.
If we spot anything which is not as it should be then shutdown the
device and don't try to continue with the ring in a potentially
hostile state. Well behaved and non-hostile frontends will not be
penalised.

As well as making the existing checks for such errors fatal also add a
new check that ensures that there isn't an insane number of requests
on the ring (i.e. more than would fit in the ring). If the ring
contains garbage then previously is was possible to loop over this
insane number, getting an error each time and therefore not generating
any more pending requests and therefore not exiting the loop in
xen_netbk_tx_build_gops for an externded period.

Also turn various netdev_dbg calls which no precipitate a fatal error
into netdev_err, they are rate limited because the device is shutdown
afterwards.

This fixes at least one known DoS/softlockup of the backend domain.

Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Acked-by: Jan Beulich <JBeulich@suse.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/xen-netback/common.h    |  3 ++
 drivers/net/xen-netback/interface.c | 23 ++++++++------
 drivers/net/xen-netback/netback.c   | 62 +++++++++++++++++++++++++++----------
 3 files changed, 62 insertions(+), 26 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/xen-netback/common.h b/drivers/net/xen-netback/common.h
index 94b79c3338c..9d7f1723dd8 100644
--- a/drivers/net/xen-netback/common.h
+++ b/drivers/net/xen-netback/common.h
@@ -151,6 +151,9 @@ void xen_netbk_queue_tx_skb(struct xenvif *vif, struct sk_buff *skb);
 /* Notify xenvif that ring now has space to send an skb to the frontend */
 void xenvif_notify_tx_completion(struct xenvif *vif);
 
+/* Prevent the device from generating any further traffic. */
+void xenvif_carrier_off(struct xenvif *vif);
+
 /* Returns number of ring slots required to send an skb to the frontend */
 unsigned int xen_netbk_count_skb_slots(struct xenvif *vif, struct sk_buff *skb);
 
diff --git a/drivers/net/xen-netback/interface.c b/drivers/net/xen-netback/interface.c
index b7d41f8c338..b8c5193bd42 100644
--- a/drivers/net/xen-netback/interface.c
+++ b/drivers/net/xen-netback/interface.c
@@ -343,17 +343,22 @@ err:
 	return err;
 }
 
-void xenvif_disconnect(struct xenvif *vif)
+void xenvif_carrier_off(struct xenvif *vif)
 {
 	struct net_device *dev = vif->dev;
-	if (netif_carrier_ok(dev)) {
-		rtnl_lock();
-		netif_carrier_off(dev); /* discard queued packets */
-		if (netif_running(dev))
-			xenvif_down(vif);
-		rtnl_unlock();
-		xenvif_put(vif);
-	}
+
+	rtnl_lock();
+	netif_carrier_off(dev); /* discard queued packets */
+	if (netif_running(dev))
+		xenvif_down(vif);
+	rtnl_unlock();
+	xenvif_put(vif);
+}
+
+void xenvif_disconnect(struct xenvif *vif)
+{
+	if (netif_carrier_ok(vif->dev))
+		xenvif_carrier_off(vif);
 
 	atomic_dec(&vif->refcnt);
 	wait_event(vif->waiting_to_free, atomic_read(&vif->refcnt) == 0);
diff --git a/drivers/net/xen-netback/netback.c b/drivers/net/xen-netback/netback.c
index f2d6b78d901..c2e3336b4f9 100644
--- a/drivers/net/xen-netback/netback.c
+++ b/drivers/net/xen-netback/netback.c
@@ -888,6 +888,13 @@ static void netbk_tx_err(struct xenvif *vif,
 	xenvif_put(vif);
 }
 
+static void netbk_fatal_tx_err(struct xenvif *vif)
+{
+	netdev_err(vif->dev, "fatal error; disabling device\n");
+	xenvif_carrier_off(vif);
+	xenvif_put(vif);
+}
+
 static int netbk_count_requests(struct xenvif *vif,
 				struct xen_netif_tx_request *first,
 				struct xen_netif_tx_request *txp,
@@ -901,19 +908,22 @@ static int netbk_count_requests(struct xenvif *vif,
 
 	do {
 		if (frags >= work_to_do) {
-			netdev_dbg(vif->dev, "Need more frags\n");
+			netdev_err(vif->dev, "Need more frags\n");
+			netbk_fatal_tx_err(vif);
 			return -frags;
 		}
 
 		if (unlikely(frags >= MAX_SKB_FRAGS)) {
-			netdev_dbg(vif->dev, "Too many frags\n");
+			netdev_err(vif->dev, "Too many frags\n");
+			netbk_fatal_tx_err(vif);
 			return -frags;
 		}
 
 		memcpy(txp, RING_GET_REQUEST(&vif->tx, cons + frags),
 		       sizeof(*txp));
 		if (txp->size > first->size) {
-			netdev_dbg(vif->dev, "Frags galore\n");
+			netdev_err(vif->dev, "Frag is bigger than frame.\n");
+			netbk_fatal_tx_err(vif);
 			return -frags;
 		}
 
@@ -921,8 +931,9 @@ static int netbk_count_requests(struct xenvif *vif,
 		frags++;
 
 		if (unlikely((txp->offset + txp->size) > PAGE_SIZE)) {
-			netdev_dbg(vif->dev, "txp->offset: %x, size: %u\n",
+			netdev_err(vif->dev, "txp->offset: %x, size: %u\n",
 				 txp->offset, txp->size);
+			netbk_fatal_tx_err(vif);
 			return -frags;
 		}
 	} while ((txp++)->flags & XEN_NETTXF_more_data);
@@ -1095,7 +1106,8 @@ static int xen_netbk_get_extras(struct xenvif *vif,
 
 	do {
 		if (unlikely(work_to_do-- <= 0)) {
-			netdev_dbg(vif->dev, "Missing extra info\n");
+			netdev_err(vif->dev, "Missing extra info\n");
+			netbk_fatal_tx_err(vif);
 			return -EBADR;
 		}
 
@@ -1104,8 +1116,9 @@ static int xen_netbk_get_extras(struct xenvif *vif,
 		if (unlikely(!extra.type ||
 			     extra.type >= XEN_NETIF_EXTRA_TYPE_MAX)) {
 			vif->tx.req_cons = ++cons;
-			netdev_dbg(vif->dev,
+			netdev_err(vif->dev,
 				   "Invalid extra type: %d\n", extra.type);
+			netbk_fatal_tx_err(vif);
 			return -EINVAL;
 		}
 
@@ -1121,13 +1134,15 @@ static int netbk_set_skb_gso(struct xenvif *vif,
 			     struct xen_netif_extra_info *gso)
 {
 	if (!gso->u.gso.size) {
-		netdev_dbg(vif->dev, "GSO size must not be zero.\n");
+		netdev_err(vif->dev, "GSO size must not be zero.\n");
+		netbk_fatal_tx_err(vif);
 		return -EINVAL;
 	}
 
 	/* Currently only TCPv4 S.O. is supported. */
 	if (gso->u.gso.type != XEN_NETIF_GSO_TYPE_TCPV4) {
-		netdev_dbg(vif->dev, "Bad GSO type %d.\n", gso->u.gso.type);
+		netdev_err(vif->dev, "Bad GSO type %d.\n", gso->u.gso.type);
+		netbk_fatal_tx_err(vif);
 		return -EINVAL;
 	}
 
@@ -1264,9 +1279,25 @@ static unsigned xen_netbk_tx_build_gops(struct xen_netbk *netbk)
 
 		/* Get a netif from the list with work to do. */
 		vif = poll_net_schedule_list(netbk);
+		/* This can sometimes happen because the test of
+		 * list_empty(net_schedule_list) at the top of the
+		 * loop is unlocked.  Just go back and have another
+		 * look.
+		 */
 		if (!vif)
 			continue;
 
+		if (vif->tx.sring->req_prod - vif->tx.req_cons >
+		    XEN_NETIF_TX_RING_SIZE) {
+			netdev_err(vif->dev,
+				   "Impossible number of requests. "
+				   "req_prod %d, req_cons %d, size %ld\n",
+				   vif->tx.sring->req_prod, vif->tx.req_cons,
+				   XEN_NETIF_TX_RING_SIZE);
+			netbk_fatal_tx_err(vif);
+			continue;
+		}
+
 		RING_FINAL_CHECK_FOR_REQUESTS(&vif->tx, work_to_do);
 		if (!work_to_do) {
 			xenvif_put(vif);
@@ -1294,17 +1325,14 @@ static unsigned xen_netbk_tx_build_gops(struct xen_netbk *netbk)
 			work_to_do = xen_netbk_get_extras(vif, extras,
 							  work_to_do);
 			idx = vif->tx.req_cons;
-			if (unlikely(work_to_do < 0)) {
-				netbk_tx_err(vif, &txreq, idx);
+			if (unlikely(work_to_do < 0))
 				continue;
-			}
 		}
 
 		ret = netbk_count_requests(vif, &txreq, txfrags, work_to_do);
-		if (unlikely(ret < 0)) {
-			netbk_tx_err(vif, &txreq, idx - ret);
+		if (unlikely(ret < 0))
 			continue;
-		}
+
 		idx += ret;
 
 		if (unlikely(txreq.size < ETH_HLEN)) {
@@ -1316,11 +1344,11 @@ static unsigned xen_netbk_tx_build_gops(struct xen_netbk *netbk)
 
 		/* No crossing a page as the payload mustn't fragment. */
 		if (unlikely((txreq.offset + txreq.size) > PAGE_SIZE)) {
-			netdev_dbg(vif->dev,
+			netdev_err(vif->dev,
 				   "txreq.offset: %x, size: %u, end: %lu\n",
 				   txreq.offset, txreq.size,
 				   (txreq.offset&~PAGE_MASK) + txreq.size);
-			netbk_tx_err(vif, &txreq, idx);
+			netbk_fatal_tx_err(vif);
 			continue;
 		}
 
@@ -1348,8 +1376,8 @@ static unsigned xen_netbk_tx_build_gops(struct xen_netbk *netbk)
 			gso = &extras[XEN_NETIF_EXTRA_TYPE_GSO - 1];
 
 			if (netbk_set_skb_gso(vif, skb, gso)) {
+				/* Failure in netbk_set_skb_gso is fatal. */
 				kfree_skb(skb);
-				netbk_tx_err(vif, &txreq, idx);
 				continue;
 			}
 		}
-- 
cgit v1.2.3-70-g09d2


From 7d5145d8eb2b9791533ffe4dc003b129b9696c48 Mon Sep 17 00:00:00 2001
From: Matthew Daley <mattjd@gmail.com>
Date: Wed, 6 Feb 2013 23:41:36 +0000
Subject: xen/netback: don't leak pages on failure in xen_netbk_tx_check_gop.

Signed-off-by: Matthew Daley <mattjd@gmail.com>
Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Acked-by: Jan Beulich <JBeulich@suse.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/xen-netback/netback.c | 38 +++++++++++++-------------------------
 1 file changed, 13 insertions(+), 25 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/xen-netback/netback.c b/drivers/net/xen-netback/netback.c
index c2e3336b4f9..bf692df966a 100644
--- a/drivers/net/xen-netback/netback.c
+++ b/drivers/net/xen-netback/netback.c
@@ -147,7 +147,8 @@ void xen_netbk_remove_xenvif(struct xenvif *vif)
 	atomic_dec(&netbk->netfront_count);
 }
 
-static void xen_netbk_idx_release(struct xen_netbk *netbk, u16 pending_idx);
+static void xen_netbk_idx_release(struct xen_netbk *netbk, u16 pending_idx,
+				  u8 status);
 static void make_tx_response(struct xenvif *vif,
 			     struct xen_netif_tx_request *txp,
 			     s8       st);
@@ -1007,30 +1008,20 @@ static int xen_netbk_tx_check_gop(struct xen_netbk *netbk,
 {
 	struct gnttab_copy *gop = *gopp;
 	u16 pending_idx = *((u16 *)skb->data);
-	struct pending_tx_info *pending_tx_info = netbk->pending_tx_info;
-	struct xenvif *vif = pending_tx_info[pending_idx].vif;
-	struct xen_netif_tx_request *txp;
 	struct skb_shared_info *shinfo = skb_shinfo(skb);
 	int nr_frags = shinfo->nr_frags;
 	int i, err, start;
 
 	/* Check status of header. */
 	err = gop->status;
-	if (unlikely(err)) {
-		pending_ring_idx_t index;
-		index = pending_index(netbk->pending_prod++);
-		txp = &pending_tx_info[pending_idx].req;
-		make_tx_response(vif, txp, XEN_NETIF_RSP_ERROR);
-		netbk->pending_ring[index] = pending_idx;
-		xenvif_put(vif);
-	}
+	if (unlikely(err))
+		xen_netbk_idx_release(netbk, pending_idx, XEN_NETIF_RSP_ERROR);
 
 	/* Skip first skb fragment if it is on same page as header fragment. */
 	start = (frag_get_pending_idx(&shinfo->frags[0]) == pending_idx);
 
 	for (i = start; i < nr_frags; i++) {
 		int j, newerr;
-		pending_ring_idx_t index;
 
 		pending_idx = frag_get_pending_idx(&shinfo->frags[i]);
 
@@ -1039,16 +1030,12 @@ static int xen_netbk_tx_check_gop(struct xen_netbk *netbk,
 		if (likely(!newerr)) {
 			/* Had a previous error? Invalidate this fragment. */
 			if (unlikely(err))
-				xen_netbk_idx_release(netbk, pending_idx);
+				xen_netbk_idx_release(netbk, pending_idx, XEN_NETIF_RSP_OKAY);
 			continue;
 		}
 
 		/* Error on this fragment: respond to client with an error. */
-		txp = &netbk->pending_tx_info[pending_idx].req;
-		make_tx_response(vif, txp, XEN_NETIF_RSP_ERROR);
-		index = pending_index(netbk->pending_prod++);
-		netbk->pending_ring[index] = pending_idx;
-		xenvif_put(vif);
+		xen_netbk_idx_release(netbk, pending_idx, XEN_NETIF_RSP_ERROR);
 
 		/* Not the first error? Preceding frags already invalidated. */
 		if (err)
@@ -1056,10 +1043,10 @@ static int xen_netbk_tx_check_gop(struct xen_netbk *netbk,
 
 		/* First error: invalidate header and preceding fragments. */
 		pending_idx = *((u16 *)skb->data);
-		xen_netbk_idx_release(netbk, pending_idx);
+		xen_netbk_idx_release(netbk, pending_idx, XEN_NETIF_RSP_OKAY);
 		for (j = start; j < i; j++) {
 			pending_idx = frag_get_pending_idx(&shinfo->frags[j]);
-			xen_netbk_idx_release(netbk, pending_idx);
+			xen_netbk_idx_release(netbk, pending_idx, XEN_NETIF_RSP_OKAY);
 		}
 
 		/* Remember the error: invalidate all subsequent fragments. */
@@ -1093,7 +1080,7 @@ static void xen_netbk_fill_frags(struct xen_netbk *netbk, struct sk_buff *skb)
 
 		/* Take an extra reference to offset xen_netbk_idx_release */
 		get_page(netbk->mmap_pages[pending_idx]);
-		xen_netbk_idx_release(netbk, pending_idx);
+		xen_netbk_idx_release(netbk, pending_idx, XEN_NETIF_RSP_OKAY);
 	}
 }
 
@@ -1476,7 +1463,7 @@ static void xen_netbk_tx_submit(struct xen_netbk *netbk)
 			txp->size -= data_len;
 		} else {
 			/* Schedule a response immediately. */
-			xen_netbk_idx_release(netbk, pending_idx);
+			xen_netbk_idx_release(netbk, pending_idx, XEN_NETIF_RSP_OKAY);
 		}
 
 		if (txp->flags & XEN_NETTXF_csum_blank)
@@ -1528,7 +1515,8 @@ static void xen_netbk_tx_action(struct xen_netbk *netbk)
 	xen_netbk_tx_submit(netbk);
 }
 
-static void xen_netbk_idx_release(struct xen_netbk *netbk, u16 pending_idx)
+static void xen_netbk_idx_release(struct xen_netbk *netbk, u16 pending_idx,
+				  u8 status)
 {
 	struct xenvif *vif;
 	struct pending_tx_info *pending_tx_info;
@@ -1542,7 +1530,7 @@ static void xen_netbk_idx_release(struct xen_netbk *netbk, u16 pending_idx)
 
 	vif = pending_tx_info->vif;
 
-	make_tx_response(vif, &pending_tx_info->req, XEN_NETIF_RSP_OKAY);
+	make_tx_response(vif, &pending_tx_info->req, status);
 
 	index = pending_index(netbk->pending_prod++);
 	netbk->pending_ring[index] = pending_idx;
-- 
cgit v1.2.3-70-g09d2


From 4cc7c1cb7b11b6f3515bd9075527576a1eecc4aa Mon Sep 17 00:00:00 2001
From: Ian Campbell <Ian.Campbell@citrix.com>
Date: Wed, 6 Feb 2013 23:41:37 +0000
Subject: xen/netback: free already allocated memory on failure in
 xen_netbk_get_requests

Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/xen-netback/netback.c | 13 ++++++++++++-
 1 file changed, 12 insertions(+), 1 deletion(-)

(limited to 'drivers/net')

diff --git a/drivers/net/xen-netback/netback.c b/drivers/net/xen-netback/netback.c
index bf692df966a..dcb2d4d3c3e 100644
--- a/drivers/net/xen-netback/netback.c
+++ b/drivers/net/xen-netback/netback.c
@@ -978,7 +978,7 @@ static struct gnttab_copy *xen_netbk_get_requests(struct xen_netbk *netbk,
 		pending_idx = netbk->pending_ring[index];
 		page = xen_netbk_alloc_page(netbk, skb, pending_idx);
 		if (!page)
-			return NULL;
+			goto err;
 
 		gop->source.u.ref = txp->gref;
 		gop->source.domid = vif->domid;
@@ -1000,6 +1000,17 @@ static struct gnttab_copy *xen_netbk_get_requests(struct xen_netbk *netbk,
 	}
 
 	return gop;
+err:
+	/* Unwind, freeing all pages and sending error responses. */
+	while (i-- > start) {
+		xen_netbk_idx_release(netbk, frag_get_pending_idx(&frags[i]),
+				      XEN_NETIF_RSP_ERROR);
+	}
+	/* The head too, if necessary. */
+	if (start)
+		xen_netbk_idx_release(netbk, pending_idx, XEN_NETIF_RSP_ERROR);
+
+	return NULL;
 }
 
 static int xen_netbk_tx_check_gop(struct xen_netbk *netbk,
-- 
cgit v1.2.3-70-g09d2


From b9149729ebdcfce63f853aa54a404c6a8f6ebbf3 Mon Sep 17 00:00:00 2001
From: Ian Campbell <Ian.Campbell@citrix.com>
Date: Wed, 6 Feb 2013 23:41:38 +0000
Subject: netback: correct netbk_tx_err to handle wrap around.

Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Acked-by: Jan Beulich <JBeulich@suse.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/xen-netback/netback.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'drivers/net')

diff --git a/drivers/net/xen-netback/netback.c b/drivers/net/xen-netback/netback.c
index dcb2d4d3c3e..2b9520c46e9 100644
--- a/drivers/net/xen-netback/netback.c
+++ b/drivers/net/xen-netback/netback.c
@@ -880,7 +880,7 @@ static void netbk_tx_err(struct xenvif *vif,
 
 	do {
 		make_tx_response(vif, txp, XEN_NETIF_RSP_ERROR);
-		if (cons >= end)
+		if (cons == end)
 			break;
 		txp = RING_GET_REQUEST(&vif->tx, cons++);
 	} while (1);
-- 
cgit v1.2.3-70-g09d2