From 98891754ea9453de4db9111c91b20122ca330101 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Tue, 26 Feb 2013 11:28:19 +0100 Subject: iwlwifi: don't map complete commands bidirectionally The reason we mapped them bidirectionally was that not doing so had caused IOMMU exceptions, due to the fact that the HW writes back into the command. Now that the first part of the command including the write-back part is always in the first buffer, we don't need to map the remaining buffer(s) bidi and can get rid of the special-casing for commands. This is a requisite patch for another one to fix DMA mapping. Reviewed-by: Emmanuel Grumbach Signed-off-by: Johannes Berg --- drivers/net/wireless/iwlwifi/pcie/tx.c | 33 +++++++++++---------------------- 1 file changed, 11 insertions(+), 22 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/wireless/iwlwifi/pcie/tx.c b/drivers/net/wireless/iwlwifi/pcie/tx.c index 8b625a7f568..975492f0b8c 100644 --- a/drivers/net/wireless/iwlwifi/pcie/tx.c +++ b/drivers/net/wireless/iwlwifi/pcie/tx.c @@ -367,8 +367,8 @@ static inline u8 iwl_pcie_tfd_get_num_tbs(struct iwl_tfd *tfd) } static void iwl_pcie_tfd_unmap(struct iwl_trans *trans, - struct iwl_cmd_meta *meta, struct iwl_tfd *tfd, - enum dma_data_direction dma_dir) + struct iwl_cmd_meta *meta, + struct iwl_tfd *tfd) { int i; int num_tbs; @@ -392,7 +392,8 @@ static void iwl_pcie_tfd_unmap(struct iwl_trans *trans, /* Unmap chunks, if any. */ for (i = 1; i < num_tbs; i++) dma_unmap_single(trans->dev, iwl_pcie_tfd_tb_get_addr(tfd, i), - iwl_pcie_tfd_tb_get_len(tfd, i), dma_dir); + iwl_pcie_tfd_tb_get_len(tfd, i), + DMA_TO_DEVICE); tfd->num_tbs = 0; } @@ -406,8 +407,7 @@ static void iwl_pcie_tfd_unmap(struct iwl_trans *trans, * Does NOT advance any TFD circular buffer read/write indexes * Does NOT free the TFD itself (which is within circular buffer) */ -static void iwl_pcie_txq_free_tfd(struct iwl_trans *trans, struct iwl_txq *txq, - enum dma_data_direction dma_dir) +static void iwl_pcie_txq_free_tfd(struct iwl_trans *trans, struct iwl_txq *txq) { struct iwl_tfd *tfd_tmp = txq->tfds; @@ -418,8 +418,7 @@ static void iwl_pcie_txq_free_tfd(struct iwl_trans *trans, struct iwl_txq *txq, lockdep_assert_held(&txq->lock); /* We have only q->n_window txq->entries, but we use q->n_bd tfds */ - iwl_pcie_tfd_unmap(trans, &txq->entries[idx].meta, &tfd_tmp[rd_ptr], - dma_dir); + iwl_pcie_tfd_unmap(trans, &txq->entries[idx].meta, &tfd_tmp[rd_ptr]); /* free SKB */ if (txq->entries) { @@ -565,22 +564,13 @@ static void iwl_pcie_txq_unmap(struct iwl_trans *trans, int txq_id) struct iwl_trans_pcie *trans_pcie = IWL_TRANS_GET_PCIE_TRANS(trans); struct iwl_txq *txq = &trans_pcie->txq[txq_id]; struct iwl_queue *q = &txq->q; - enum dma_data_direction dma_dir; if (!q->n_bd) return; - /* In the command queue, all the TBs are mapped as BIDI - * so unmap them as such. - */ - if (txq_id == trans_pcie->cmd_queue) - dma_dir = DMA_BIDIRECTIONAL; - else - dma_dir = DMA_TO_DEVICE; - spin_lock_bh(&txq->lock); while (q->write_ptr != q->read_ptr) { - iwl_pcie_txq_free_tfd(trans, txq, dma_dir); + iwl_pcie_txq_free_tfd(trans, txq); q->read_ptr = iwl_queue_inc_wrap(q->read_ptr, q->n_bd); } spin_unlock_bh(&txq->lock); @@ -962,7 +952,7 @@ void iwl_trans_pcie_reclaim(struct iwl_trans *trans, int txq_id, int ssn, iwl_pcie_txq_inval_byte_cnt_tbl(trans, txq); - iwl_pcie_txq_free_tfd(trans, txq, DMA_TO_DEVICE); + iwl_pcie_txq_free_tfd(trans, txq); } iwl_pcie_txq_progress(trans_pcie, txq); @@ -1340,11 +1330,10 @@ static int iwl_pcie_enqueue_hcmd(struct iwl_trans *trans, if (cmd->dataflags[i] & IWL_HCMD_DFL_DUP) data = dup_buf; phys_addr = dma_map_single(trans->dev, (void *)data, - cmdlen[i], DMA_BIDIRECTIONAL); + cmdlen[i], DMA_TO_DEVICE); if (dma_mapping_error(trans->dev, phys_addr)) { iwl_pcie_tfd_unmap(trans, out_meta, - &txq->tfds[q->write_ptr], - DMA_BIDIRECTIONAL); + &txq->tfds[q->write_ptr]); idx = -ENOMEM; goto out; } @@ -1418,7 +1407,7 @@ void iwl_pcie_hcmd_complete(struct iwl_trans *trans, cmd = txq->entries[cmd_index].cmd; meta = &txq->entries[cmd_index].meta; - iwl_pcie_tfd_unmap(trans, meta, &txq->tfds[index], DMA_BIDIRECTIONAL); + iwl_pcie_tfd_unmap(trans, meta, &txq->tfds[index]); /* Input error checking is done when commands are added to queue. */ if (meta->flags & CMD_WANT_SKB) { -- cgit v1.2.3-70-g09d2 From 1afbfb6041fb8f639e742620ad933c347e14ba2c Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Tue, 26 Feb 2013 11:32:26 +0100 Subject: iwlwifi: rename IWL_MAX_CMD_TFDS to IWL_MAX_CMD_TBS_PER_TFD The IWL_MAX_CMD_TFDS name for this constant is wrong, the constant really indicates how many TBs we can use in the driver for a single command TFD, rename the constant and also add a comment explaining it. Reviewed-by: Emmanuel Grumbach Signed-off-by: Johannes Berg --- drivers/net/wireless/iwlwifi/iwl-devtrace.h | 2 +- drivers/net/wireless/iwlwifi/iwl-trans.h | 12 ++++++++---- drivers/net/wireless/iwlwifi/pcie/tx.c | 12 ++++++------ 3 files changed, 15 insertions(+), 11 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/wireless/iwlwifi/iwl-devtrace.h b/drivers/net/wireless/iwlwifi/iwl-devtrace.h index 10f01793d7a..81aa91fab5a 100644 --- a/drivers/net/wireless/iwlwifi/iwl-devtrace.h +++ b/drivers/net/wireless/iwlwifi/iwl-devtrace.h @@ -363,7 +363,7 @@ TRACE_EVENT(iwlwifi_dev_hcmd, __entry->flags = cmd->flags; memcpy(__get_dynamic_array(hcmd), hdr, sizeof(*hdr)); - for (i = 0; i < IWL_MAX_CMD_TFDS; i++) { + for (i = 0; i < IWL_MAX_CMD_TBS_PER_TFD; i++) { if (!cmd->len[i]) continue; memcpy((u8 *)__get_dynamic_array(hcmd) + offset, diff --git a/drivers/net/wireless/iwlwifi/iwl-trans.h b/drivers/net/wireless/iwlwifi/iwl-trans.h index 8c7bec6b9a0..058947f213b 100644 --- a/drivers/net/wireless/iwlwifi/iwl-trans.h +++ b/drivers/net/wireless/iwlwifi/iwl-trans.h @@ -217,7 +217,11 @@ struct iwl_device_cmd { #define TFD_MAX_PAYLOAD_SIZE (sizeof(struct iwl_device_cmd)) -#define IWL_MAX_CMD_TFDS 2 +/* + * number of transfer buffers (fragments) per transmit frame descriptor; + * this is just the driver's idea, the hardware supports 20 + */ +#define IWL_MAX_CMD_TBS_PER_TFD 2 /** * struct iwl_hcmd_dataflag - flag for each one of the chunks of the command @@ -254,15 +258,15 @@ enum iwl_hcmd_dataflag { * @id: id of the host command */ struct iwl_host_cmd { - const void *data[IWL_MAX_CMD_TFDS]; + const void *data[IWL_MAX_CMD_TBS_PER_TFD]; struct iwl_rx_packet *resp_pkt; unsigned long _rx_page_addr; u32 _rx_page_order; int handler_status; u32 flags; - u16 len[IWL_MAX_CMD_TFDS]; - u8 dataflags[IWL_MAX_CMD_TFDS]; + u16 len[IWL_MAX_CMD_TBS_PER_TFD]; + u8 dataflags[IWL_MAX_CMD_TBS_PER_TFD]; u8 id; }; diff --git a/drivers/net/wireless/iwlwifi/pcie/tx.c b/drivers/net/wireless/iwlwifi/pcie/tx.c index 975492f0b8c..ff80a7e55f0 100644 --- a/drivers/net/wireless/iwlwifi/pcie/tx.c +++ b/drivers/net/wireless/iwlwifi/pcie/tx.c @@ -1146,16 +1146,16 @@ static int iwl_pcie_enqueue_hcmd(struct iwl_trans *trans, bool had_nocopy = false; int i; u32 cmd_pos; - const u8 *cmddata[IWL_MAX_CMD_TFDS]; - u16 cmdlen[IWL_MAX_CMD_TFDS]; + const u8 *cmddata[IWL_MAX_CMD_TBS_PER_TFD]; + u16 cmdlen[IWL_MAX_CMD_TBS_PER_TFD]; copy_size = sizeof(out_cmd->hdr); cmd_size = sizeof(out_cmd->hdr); /* need one for the header if the first is NOCOPY */ - BUILD_BUG_ON(IWL_MAX_CMD_TFDS > IWL_NUM_OF_TBS - 1); + BUILD_BUG_ON(IWL_MAX_CMD_TBS_PER_TFD > IWL_NUM_OF_TBS - 1); - for (i = 0; i < IWL_MAX_CMD_TFDS; i++) { + for (i = 0; i < IWL_MAX_CMD_TBS_PER_TFD; i++) { cmddata[i] = cmd->data[i]; cmdlen[i] = cmd->len[i]; @@ -1250,7 +1250,7 @@ static int iwl_pcie_enqueue_hcmd(struct iwl_trans *trans, /* and copy the data that needs to be copied */ cmd_pos = offsetof(struct iwl_device_cmd, payload); copy_size = sizeof(out_cmd->hdr); - for (i = 0; i < IWL_MAX_CMD_TFDS; i++) { + for (i = 0; i < IWL_MAX_CMD_TBS_PER_TFD; i++) { int copy = 0; if (!cmd->len) @@ -1319,7 +1319,7 @@ static int iwl_pcie_enqueue_hcmd(struct iwl_trans *trans, iwl_pcie_txq_build_tfd(trans, txq, phys_addr, copy_size, 1); /* map the remaining (adjusted) nocopy/dup fragments */ - for (i = 0; i < IWL_MAX_CMD_TFDS; i++) { + for (i = 0; i < IWL_MAX_CMD_TBS_PER_TFD; i++) { const void *data = cmddata[i]; if (!cmdlen[i]) -- cgit v1.2.3-70-g09d2 From aed7d9ac1836defe033b561f4306e39014ac56fd Mon Sep 17 00:00:00 2001 From: Emmanuel Grumbach Date: Wed, 20 Feb 2013 11:33:00 +0200 Subject: iwlwifi: disable 8K A-MSDU by default Supporting 8K A-MSDU means that we need to allocate order 1 pages for every Rx packet. Even when there is no traffic. This adds stress on the memory manager. The handling of compound pages is also less trivial for the memory manager and not using them will make the allocation code run faster although I didn't really measure. Eric also pointed out that having huge buffers with little data in them is not very nice towards the TCP stack since the truesize of the skb is huge. This doesn't allow TCP to have a big Rx window. See https://patchwork.kernel.org/patch/2167711/ for details. Note that very few vendors will actually send A-MSDU. Disable this feature by default. Signed-off-by: Emmanuel Grumbach Signed-off-by: Johannes Berg --- drivers/net/wireless/iwlwifi/iwl-drv.c | 3 +-- drivers/net/wireless/iwlwifi/iwl-modparams.h | 2 +- 2 files changed, 2 insertions(+), 3 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/wireless/iwlwifi/iwl-drv.c b/drivers/net/wireless/iwlwifi/iwl-drv.c index 6f228bb2b84..fbfd2d13711 100644 --- a/drivers/net/wireless/iwlwifi/iwl-drv.c +++ b/drivers/net/wireless/iwlwifi/iwl-drv.c @@ -1102,7 +1102,6 @@ void iwl_drv_stop(struct iwl_drv *drv) /* shared module parameters */ struct iwl_mod_params iwlwifi_mod_params = { - .amsdu_size_8K = 1, .restart_fw = 1, .plcp_check = true, .bt_coex_active = true, @@ -1207,7 +1206,7 @@ MODULE_PARM_DESC(11n_disable, "disable 11n functionality, bitmap: 1: full, 2: agg TX, 4: agg RX"); module_param_named(amsdu_size_8K, iwlwifi_mod_params.amsdu_size_8K, int, S_IRUGO); -MODULE_PARM_DESC(amsdu_size_8K, "enable 8K amsdu size"); +MODULE_PARM_DESC(amsdu_size_8K, "enable 8K amsdu size (default 0)"); module_param_named(fw_restart, iwlwifi_mod_params.restart_fw, int, S_IRUGO); MODULE_PARM_DESC(fw_restart, "restart firmware in case of error"); diff --git a/drivers/net/wireless/iwlwifi/iwl-modparams.h b/drivers/net/wireless/iwlwifi/iwl-modparams.h index e5e3a79eae2..2c2a729092f 100644 --- a/drivers/net/wireless/iwlwifi/iwl-modparams.h +++ b/drivers/net/wireless/iwlwifi/iwl-modparams.h @@ -91,7 +91,7 @@ enum iwl_power_level { * @sw_crypto: using hardware encryption, default = 0 * @disable_11n: disable 11n capabilities, default = 0, * use IWL_DISABLE_HT_* constants - * @amsdu_size_8K: enable 8K amsdu size, default = 1 + * @amsdu_size_8K: enable 8K amsdu size, default = 0 * @restart_fw: restart firmware, default = 1 * @plcp_check: enable plcp health check, default = true * @wd_disable: enable stuck queue check, default = 0 -- cgit v1.2.3-70-g09d2 From 38c0f334b359953f010e9b921e0b55278d3918f7 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Wed, 27 Feb 2013 13:18:50 +0100 Subject: iwlwifi: use coherent DMA memory for command header Recently in commit 8a964f44e01ad3bbc208c3e80d931ba91b9ea786 ("iwlwifi: always copy first 16 bytes of commands") we fixed the problem that the hardware writes back to the command and that could overwrite parts of the data that was still needed and would thus be corrupted. Investigating this problem more closely we found that this write-back isn't really ordered very well with respect to other DMA traffic. Therefore, it sometimes happened that the write-back occurred after unmapping the command again which is clearly an issue and could corrupt the next allocation that goes to that spot, or (better) cause IOMMU faults. To fix this, allocate coherent memory for the first 16 bytes of each command, containing the write-back part, and use it for all queues. All the dynamic DMA mappings only need to be TO_DEVICE then. This ensures that even when the write-back happens "too late" it can't hit memory that has been freed or a mapping that doesn't exist any more. Since now the actual command is no longer modified, we can also remove CMD_WANT_HCMD and get rid of the DMA sync that was necessary to update the scratch pointer. Reviewed-by: Emmanuel Grumbach Signed-off-by: Johannes Berg --- drivers/net/wireless/iwlwifi/dvm/sta.c | 2 +- drivers/net/wireless/iwlwifi/iwl-trans.h | 8 +- drivers/net/wireless/iwlwifi/pcie/internal.h | 34 +++-- drivers/net/wireless/iwlwifi/pcie/rx.c | 14 +- drivers/net/wireless/iwlwifi/pcie/tx.c | 221 +++++++++++++-------------- 5 files changed, 137 insertions(+), 142 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/wireless/iwlwifi/dvm/sta.c b/drivers/net/wireless/iwlwifi/dvm/sta.c index 94ef33838bc..b775769f832 100644 --- a/drivers/net/wireless/iwlwifi/dvm/sta.c +++ b/drivers/net/wireless/iwlwifi/dvm/sta.c @@ -151,7 +151,7 @@ int iwl_send_add_sta(struct iwl_priv *priv, sta_id, sta->sta.addr, flags & CMD_ASYNC ? "a" : ""); if (!(flags & CMD_ASYNC)) { - cmd.flags |= CMD_WANT_SKB | CMD_WANT_HCMD; + cmd.flags |= CMD_WANT_SKB; might_sleep(); } diff --git a/drivers/net/wireless/iwlwifi/iwl-trans.h b/drivers/net/wireless/iwlwifi/iwl-trans.h index 058947f213b..0cac2b7af78 100644 --- a/drivers/net/wireless/iwlwifi/iwl-trans.h +++ b/drivers/net/wireless/iwlwifi/iwl-trans.h @@ -186,19 +186,13 @@ struct iwl_rx_packet { * @CMD_ASYNC: Return right away and don't want for the response * @CMD_WANT_SKB: valid only with CMD_SYNC. The caller needs the buffer of the * response. The caller needs to call iwl_free_resp when done. - * @CMD_WANT_HCMD: The caller needs to get the HCMD that was sent in the - * response handler. Chunks flagged by %IWL_HCMD_DFL_NOCOPY won't be - * copied. The pointer passed to the response handler is in the transport - * ownership and don't need to be freed by the op_mode. This also means - * that the pointer is invalidated after the op_mode's handler returns. * @CMD_ON_DEMAND: This command is sent by the test mode pipe. */ enum CMD_MODE { CMD_SYNC = 0, CMD_ASYNC = BIT(0), CMD_WANT_SKB = BIT(1), - CMD_WANT_HCMD = BIT(2), - CMD_ON_DEMAND = BIT(3), + CMD_ON_DEMAND = BIT(2), }; #define DEF_CMD_PAYLOAD_SIZE 320 diff --git a/drivers/net/wireless/iwlwifi/pcie/internal.h b/drivers/net/wireless/iwlwifi/pcie/internal.h index 3d62e805535..148843e7f34 100644 --- a/drivers/net/wireless/iwlwifi/pcie/internal.h +++ b/drivers/net/wireless/iwlwifi/pcie/internal.h @@ -137,10 +137,6 @@ static inline int iwl_queue_dec_wrap(int index, int n_bd) struct iwl_cmd_meta { /* only for SYNC commands, iff the reply skb is wanted */ struct iwl_host_cmd *source; - - DEFINE_DMA_UNMAP_ADDR(mapping); - DEFINE_DMA_UNMAP_LEN(len); - u32 flags; }; @@ -185,25 +181,36 @@ struct iwl_queue { /* * The FH will write back to the first TB only, so we need * to copy some data into the buffer regardless of whether - * it should be mapped or not. This indicates how much to - * copy, even for HCMDs it must be big enough to fit the - * DRAM scratch from the TX cmd, at least 16 bytes. + * it should be mapped or not. This indicates how big the + * first TB must be to include the scratch buffer. Since + * the scratch is 4 bytes at offset 12, it's 16 now. If we + * make it bigger then allocations will be bigger and copy + * slower, so that's probably not useful. */ -#define IWL_HCMD_MIN_COPY_SIZE 16 +#define IWL_HCMD_SCRATCHBUF_SIZE 16 struct iwl_pcie_txq_entry { struct iwl_device_cmd *cmd; - struct iwl_device_cmd *copy_cmd; struct sk_buff *skb; /* buffer to free after command completes */ const void *free_buf; struct iwl_cmd_meta meta; }; +struct iwl_pcie_txq_scratch_buf { + struct iwl_cmd_header hdr; + u8 buf[8]; + __le32 scratch; +}; + /** * struct iwl_txq - Tx Queue for DMA * @q: generic Rx/Tx queue descriptor * @tfds: transmit frame descriptors (DMA memory) + * @scratchbufs: start of command headers, including scratch buffers, for + * the writeback -- this is DMA memory and an array holding one buffer + * for each command on the queue + * @scratchbufs_dma: DMA address for the scratchbufs start * @entries: transmit entries (driver state) * @lock: queue lock * @stuck_timer: timer that fires if queue gets stuck @@ -217,6 +224,8 @@ struct iwl_pcie_txq_entry { struct iwl_txq { struct iwl_queue q; struct iwl_tfd *tfds; + struct iwl_pcie_txq_scratch_buf *scratchbufs; + dma_addr_t scratchbufs_dma; struct iwl_pcie_txq_entry *entries; spinlock_t lock; struct timer_list stuck_timer; @@ -225,6 +234,13 @@ struct iwl_txq { u8 active; }; +static inline dma_addr_t +iwl_pcie_get_scratchbuf_dma(struct iwl_txq *txq, int idx) +{ + return txq->scratchbufs_dma + + sizeof(struct iwl_pcie_txq_scratch_buf) * idx; +} + /** * struct iwl_trans_pcie - PCIe transport specific data * @rxq: all the RX queue data diff --git a/drivers/net/wireless/iwlwifi/pcie/rx.c b/drivers/net/wireless/iwlwifi/pcie/rx.c index b0ae06d2456..567e67ad1f6 100644 --- a/drivers/net/wireless/iwlwifi/pcie/rx.c +++ b/drivers/net/wireless/iwlwifi/pcie/rx.c @@ -637,22 +637,14 @@ static void iwl_pcie_rx_handle_rb(struct iwl_trans *trans, index = SEQ_TO_INDEX(sequence); cmd_index = get_cmd_index(&txq->q, index); - if (reclaim) { - struct iwl_pcie_txq_entry *ent; - ent = &txq->entries[cmd_index]; - cmd = ent->copy_cmd; - WARN_ON_ONCE(!cmd && ent->meta.flags & CMD_WANT_HCMD); - } else { + if (reclaim) + cmd = txq->entries[cmd_index].cmd; + else cmd = NULL; - } err = iwl_op_mode_rx(trans->op_mode, &rxcb, cmd); if (reclaim) { - /* The original command isn't needed any more */ - kfree(txq->entries[cmd_index].copy_cmd); - txq->entries[cmd_index].copy_cmd = NULL; - /* nor is the duplicated part of the command */ kfree(txq->entries[cmd_index].free_buf); txq->entries[cmd_index].free_buf = NULL; } diff --git a/drivers/net/wireless/iwlwifi/pcie/tx.c b/drivers/net/wireless/iwlwifi/pcie/tx.c index ff80a7e55f0..8595c16f74d 100644 --- a/drivers/net/wireless/iwlwifi/pcie/tx.c +++ b/drivers/net/wireless/iwlwifi/pcie/tx.c @@ -191,12 +191,9 @@ static void iwl_pcie_txq_stuck_timer(unsigned long data) } for (i = q->read_ptr; i != q->write_ptr; - i = iwl_queue_inc_wrap(i, q->n_bd)) { - struct iwl_tx_cmd *tx_cmd = - (struct iwl_tx_cmd *)txq->entries[i].cmd->payload; + i = iwl_queue_inc_wrap(i, q->n_bd)) IWL_ERR(trans, "scratch %d = 0x%08x\n", i, - get_unaligned_le32(&tx_cmd->scratch)); - } + le32_to_cpu(txq->scratchbufs[i].scratch)); iwl_op_mode_nic_error(trans->op_mode); } @@ -382,14 +379,8 @@ static void iwl_pcie_tfd_unmap(struct iwl_trans *trans, return; } - /* Unmap tx_cmd */ - if (num_tbs) - dma_unmap_single(trans->dev, - dma_unmap_addr(meta, mapping), - dma_unmap_len(meta, len), - DMA_BIDIRECTIONAL); + /* first TB is never freed - it's the scratchbuf data */ - /* Unmap chunks, if any. */ for (i = 1; i < num_tbs; i++) dma_unmap_single(trans->dev, iwl_pcie_tfd_tb_get_addr(tfd, i), iwl_pcie_tfd_tb_get_len(tfd, i), @@ -478,6 +469,7 @@ static int iwl_pcie_txq_alloc(struct iwl_trans *trans, { struct iwl_trans_pcie *trans_pcie = IWL_TRANS_GET_PCIE_TRANS(trans); size_t tfd_sz = sizeof(struct iwl_tfd) * TFD_QUEUE_SIZE_MAX; + size_t scratchbuf_sz; int i; if (WARN_ON(txq->entries || txq->tfds)) @@ -513,9 +505,25 @@ static int iwl_pcie_txq_alloc(struct iwl_trans *trans, IWL_ERR(trans, "dma_alloc_coherent(%zd) failed\n", tfd_sz); goto error; } + + BUILD_BUG_ON(IWL_HCMD_SCRATCHBUF_SIZE != sizeof(*txq->scratchbufs)); + BUILD_BUG_ON(offsetof(struct iwl_pcie_txq_scratch_buf, scratch) != + sizeof(struct iwl_cmd_header) + + offsetof(struct iwl_tx_cmd, scratch)); + + scratchbuf_sz = sizeof(*txq->scratchbufs) * slots_num; + + txq->scratchbufs = dma_alloc_coherent(trans->dev, scratchbuf_sz, + &txq->scratchbufs_dma, + GFP_KERNEL); + if (!txq->scratchbufs) + goto err_free_tfds; + txq->q.id = txq_id; return 0; +err_free_tfds: + dma_free_coherent(trans->dev, tfd_sz, txq->tfds, txq->q.dma_addr); error: if (txq->entries && txq_id == trans_pcie->cmd_queue) for (i = 0; i < slots_num; i++) @@ -600,7 +608,6 @@ static void iwl_pcie_txq_free(struct iwl_trans *trans, int txq_id) if (txq_id == trans_pcie->cmd_queue) for (i = 0; i < txq->q.n_window; i++) { kfree(txq->entries[i].cmd); - kfree(txq->entries[i].copy_cmd); kfree(txq->entries[i].free_buf); } @@ -609,6 +616,10 @@ static void iwl_pcie_txq_free(struct iwl_trans *trans, int txq_id) dma_free_coherent(dev, sizeof(struct iwl_tfd) * txq->q.n_bd, txq->tfds, txq->q.dma_addr); txq->q.dma_addr = 0; + + dma_free_coherent(dev, + sizeof(*txq->scratchbufs) * txq->q.n_window, + txq->scratchbufs, txq->scratchbufs_dma); } kfree(txq->entries); @@ -1142,7 +1153,7 @@ static int iwl_pcie_enqueue_hcmd(struct iwl_trans *trans, void *dup_buf = NULL; dma_addr_t phys_addr; int idx; - u16 copy_size, cmd_size, dma_size; + u16 copy_size, cmd_size, scratch_size; bool had_nocopy = false; int i; u32 cmd_pos; @@ -1162,9 +1173,9 @@ static int iwl_pcie_enqueue_hcmd(struct iwl_trans *trans, if (!cmd->len[i]) continue; - /* need at least IWL_HCMD_MIN_COPY_SIZE copied */ - if (copy_size < IWL_HCMD_MIN_COPY_SIZE) { - int copy = IWL_HCMD_MIN_COPY_SIZE - copy_size; + /* need at least IWL_HCMD_SCRATCHBUF_SIZE copied */ + if (copy_size < IWL_HCMD_SCRATCHBUF_SIZE) { + int copy = IWL_HCMD_SCRATCHBUF_SIZE - copy_size; if (copy > cmdlen[i]) copy = cmdlen[i]; @@ -1256,9 +1267,9 @@ static int iwl_pcie_enqueue_hcmd(struct iwl_trans *trans, if (!cmd->len) continue; - /* need at least IWL_HCMD_MIN_COPY_SIZE copied */ - if (copy_size < IWL_HCMD_MIN_COPY_SIZE) { - copy = IWL_HCMD_MIN_COPY_SIZE - copy_size; + /* need at least IWL_HCMD_SCRATCHBUF_SIZE copied */ + if (copy_size < IWL_HCMD_SCRATCHBUF_SIZE) { + copy = IWL_HCMD_SCRATCHBUF_SIZE - copy_size; if (copy > cmd->len[i]) copy = cmd->len[i]; @@ -1276,48 +1287,36 @@ static int iwl_pcie_enqueue_hcmd(struct iwl_trans *trans, } } - WARN_ON_ONCE(txq->entries[idx].copy_cmd); - - /* - * since out_cmd will be the source address of the FH, it will write - * the retry count there. So when the user needs to receivce the HCMD - * that corresponds to the response in the response handler, it needs - * to set CMD_WANT_HCMD. - */ - if (cmd->flags & CMD_WANT_HCMD) { - txq->entries[idx].copy_cmd = - kmemdup(out_cmd, cmd_pos, GFP_ATOMIC); - if (unlikely(!txq->entries[idx].copy_cmd)) { - idx = -ENOMEM; - goto out; - } - } - IWL_DEBUG_HC(trans, "Sending command %s (#%x), seq: 0x%04X, %d bytes at %d[%d]:%d\n", get_cmd_string(trans_pcie, out_cmd->hdr.cmd), out_cmd->hdr.cmd, le16_to_cpu(out_cmd->hdr.sequence), cmd_size, q->write_ptr, idx, trans_pcie->cmd_queue); - /* - * If the entire command is smaller than IWL_HCMD_MIN_COPY_SIZE, we must - * still map at least that many bytes for the hardware to write back to. - * We have enough space, so that's not a problem. - */ - dma_size = max_t(u16, copy_size, IWL_HCMD_MIN_COPY_SIZE); + /* start the TFD with the scratchbuf */ + scratch_size = min_t(int, copy_size, IWL_HCMD_SCRATCHBUF_SIZE); + memcpy(&txq->scratchbufs[q->write_ptr], &out_cmd->hdr, scratch_size); + iwl_pcie_txq_build_tfd(trans, txq, + iwl_pcie_get_scratchbuf_dma(txq, q->write_ptr), + scratch_size, 1); + + /* map first command fragment, if any remains */ + if (copy_size > scratch_size) { + phys_addr = dma_map_single(trans->dev, + ((u8 *)&out_cmd->hdr) + scratch_size, + copy_size - scratch_size, + DMA_TO_DEVICE); + if (dma_mapping_error(trans->dev, phys_addr)) { + iwl_pcie_tfd_unmap(trans, out_meta, + &txq->tfds[q->write_ptr]); + idx = -ENOMEM; + goto out; + } - phys_addr = dma_map_single(trans->dev, &out_cmd->hdr, dma_size, - DMA_BIDIRECTIONAL); - if (unlikely(dma_mapping_error(trans->dev, phys_addr))) { - idx = -ENOMEM; - goto out; + iwl_pcie_txq_build_tfd(trans, txq, phys_addr, + copy_size - scratch_size, 0); } - dma_unmap_addr_set(out_meta, mapping, phys_addr); - dma_unmap_len_set(out_meta, len, dma_size); - - iwl_pcie_txq_build_tfd(trans, txq, phys_addr, copy_size, 1); - /* map the remaining (adjusted) nocopy/dup fragments */ for (i = 0; i < IWL_MAX_CMD_TBS_PER_TFD; i++) { const void *data = cmddata[i]; @@ -1586,10 +1585,9 @@ int iwl_trans_pcie_tx(struct iwl_trans *trans, struct sk_buff *skb, struct iwl_cmd_meta *out_meta; struct iwl_txq *txq; struct iwl_queue *q; - dma_addr_t phys_addr = 0; - dma_addr_t txcmd_phys; - dma_addr_t scratch_phys; - u16 len, firstlen, secondlen; + dma_addr_t tb0_phys, tb1_phys, scratch_phys; + void *tb1_addr; + u16 len, tb1_len, tb2_len; u8 wait_write_ptr = 0; __le16 fc = hdr->frame_control; u8 hdr_len = ieee80211_hdrlen(fc); @@ -1627,85 +1625,80 @@ int iwl_trans_pcie_tx(struct iwl_trans *trans, struct sk_buff *skb, cpu_to_le16((u16)(QUEUE_TO_SEQ(txq_id) | INDEX_TO_SEQ(q->write_ptr))); + tb0_phys = iwl_pcie_get_scratchbuf_dma(txq, q->write_ptr); + scratch_phys = tb0_phys + sizeof(struct iwl_cmd_header) + + offsetof(struct iwl_tx_cmd, scratch); + + tx_cmd->dram_lsb_ptr = cpu_to_le32(scratch_phys); + tx_cmd->dram_msb_ptr = iwl_get_dma_hi_addr(scratch_phys); + /* Set up first empty entry in queue's array of Tx/cmd buffers */ out_meta = &txq->entries[q->write_ptr].meta; /* - * Use the first empty entry in this queue's command buffer array - * to contain the Tx command and MAC header concatenated together - * (payload data will be in another buffer). - * Size of this varies, due to varying MAC header length. - * If end is not dword aligned, we'll have 2 extra bytes at the end - * of the MAC header (device reads on dword boundaries). - * We'll tell device about this padding later. + * The second TB (tb1) points to the remainder of the TX command + * and the 802.11 header - dword aligned size + * (This calculation modifies the TX command, so do it before the + * setup of the first TB) */ - len = sizeof(struct iwl_tx_cmd) + - sizeof(struct iwl_cmd_header) + hdr_len; - firstlen = (len + 3) & ~3; + len = sizeof(struct iwl_tx_cmd) + sizeof(struct iwl_cmd_header) + + hdr_len - IWL_HCMD_SCRATCHBUF_SIZE; + tb1_len = (len + 3) & ~3; /* Tell NIC about any 2-byte padding after MAC header */ - if (firstlen != len) + if (tb1_len != len) tx_cmd->tx_flags |= TX_CMD_FLG_MH_PAD_MSK; - /* Physical address of this Tx command's header (not MAC header!), - * within command buffer array. */ - txcmd_phys = dma_map_single(trans->dev, - &dev_cmd->hdr, firstlen, - DMA_BIDIRECTIONAL); - if (unlikely(dma_mapping_error(trans->dev, txcmd_phys))) - goto out_err; - dma_unmap_addr_set(out_meta, mapping, txcmd_phys); - dma_unmap_len_set(out_meta, len, firstlen); + /* The first TB points to the scratchbuf data - min_copy bytes */ + memcpy(&txq->scratchbufs[q->write_ptr], &dev_cmd->hdr, + IWL_HCMD_SCRATCHBUF_SIZE); + iwl_pcie_txq_build_tfd(trans, txq, tb0_phys, + IWL_HCMD_SCRATCHBUF_SIZE, 1); - if (!ieee80211_has_morefrags(fc)) { - txq->need_update = 1; - } else { - wait_write_ptr = 1; - txq->need_update = 0; - } + /* there must be data left over for TB1 or this code must be changed */ + BUILD_BUG_ON(sizeof(struct iwl_tx_cmd) < IWL_HCMD_SCRATCHBUF_SIZE); + + /* map the data for TB1 */ + tb1_addr = ((u8 *)&dev_cmd->hdr) + IWL_HCMD_SCRATCHBUF_SIZE; + tb1_phys = dma_map_single(trans->dev, tb1_addr, tb1_len, DMA_TO_DEVICE); + if (unlikely(dma_mapping_error(trans->dev, tb1_phys))) + goto out_err; + iwl_pcie_txq_build_tfd(trans, txq, tb1_phys, tb1_len, 0); - /* Set up TFD's 2nd entry to point directly to remainder of skb, - * if any (802.11 null frames have no payload). */ - secondlen = skb->len - hdr_len; - if (secondlen > 0) { - phys_addr = dma_map_single(trans->dev, skb->data + hdr_len, - secondlen, DMA_TO_DEVICE); - if (unlikely(dma_mapping_error(trans->dev, phys_addr))) { - dma_unmap_single(trans->dev, - dma_unmap_addr(out_meta, mapping), - dma_unmap_len(out_meta, len), - DMA_BIDIRECTIONAL); + /* + * Set up TFD's third entry to point directly to remainder + * of skb, if any (802.11 null frames have no payload). + */ + tb2_len = skb->len - hdr_len; + if (tb2_len > 0) { + dma_addr_t tb2_phys = dma_map_single(trans->dev, + skb->data + hdr_len, + tb2_len, DMA_TO_DEVICE); + if (unlikely(dma_mapping_error(trans->dev, tb2_phys))) { + iwl_pcie_tfd_unmap(trans, out_meta, + &txq->tfds[q->write_ptr]); goto out_err; } + iwl_pcie_txq_build_tfd(trans, txq, tb2_phys, tb2_len, 0); } - /* Attach buffers to TFD */ - iwl_pcie_txq_build_tfd(trans, txq, txcmd_phys, firstlen, 1); - if (secondlen > 0) - iwl_pcie_txq_build_tfd(trans, txq, phys_addr, secondlen, 0); - - scratch_phys = txcmd_phys + sizeof(struct iwl_cmd_header) + - offsetof(struct iwl_tx_cmd, scratch); - - /* take back ownership of DMA buffer to enable update */ - dma_sync_single_for_cpu(trans->dev, txcmd_phys, firstlen, - DMA_BIDIRECTIONAL); - tx_cmd->dram_lsb_ptr = cpu_to_le32(scratch_phys); - tx_cmd->dram_msb_ptr = iwl_get_dma_hi_addr(scratch_phys); - /* Set up entry for this TFD in Tx byte-count array */ iwl_pcie_txq_update_byte_cnt_tbl(trans, txq, le16_to_cpu(tx_cmd->len)); - dma_sync_single_for_device(trans->dev, txcmd_phys, firstlen, - DMA_BIDIRECTIONAL); - trace_iwlwifi_dev_tx(trans->dev, skb, &txq->tfds[txq->q.write_ptr], sizeof(struct iwl_tfd), - &dev_cmd->hdr, firstlen, - skb->data + hdr_len, secondlen); + &dev_cmd->hdr, IWL_HCMD_SCRATCHBUF_SIZE + tb1_len, + skb->data + hdr_len, tb2_len); trace_iwlwifi_dev_tx_data(trans->dev, skb, - skb->data + hdr_len, secondlen); + skb->data + hdr_len, tb2_len); + + if (!ieee80211_has_morefrags(fc)) { + txq->need_update = 1; + } else { + wait_write_ptr = 1; + txq->need_update = 0; + } /* start timer if queue currently empty */ if (txq->need_update && q->read_ptr == q->write_ptr && -- cgit v1.2.3-70-g09d2 From 715c998ff4d1106c3096bc5a48e4196663e6701a Mon Sep 17 00:00:00 2001 From: Emmanuel Grumbach Date: Thu, 28 Feb 2013 08:57:31 +0200 Subject: iwlwifi: mvm: restart the NIC of the cmd queue gets full This situation is clearly an error situation and the only way to recover is to restart the driver / fw. Signed-off-by: Emmanuel Grumbach Reviewed-by: Ilan Peer Signed-off-by: Johannes Berg --- drivers/net/wireless/iwlwifi/mvm/ops.c | 18 +++++++++++++----- 1 file changed, 13 insertions(+), 5 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/wireless/iwlwifi/mvm/ops.c b/drivers/net/wireless/iwlwifi/mvm/ops.c index aa59adf87db..d0f9c1e0475 100644 --- a/drivers/net/wireless/iwlwifi/mvm/ops.c +++ b/drivers/net/wireless/iwlwifi/mvm/ops.c @@ -624,12 +624,8 @@ static void iwl_mvm_free_skb(struct iwl_op_mode *op_mode, struct sk_buff *skb) ieee80211_free_txskb(mvm->hw, skb); } -static void iwl_mvm_nic_error(struct iwl_op_mode *op_mode) +static void iwl_mvm_nic_restart(struct iwl_mvm *mvm) { - struct iwl_mvm *mvm = IWL_OP_MODE_GET_MVM(op_mode); - - iwl_mvm_dump_nic_error_log(mvm); - iwl_abort_notification_waits(&mvm->notif_wait); /* @@ -663,9 +659,21 @@ static void iwl_mvm_nic_error(struct iwl_op_mode *op_mode) } } +static void iwl_mvm_nic_error(struct iwl_op_mode *op_mode) +{ + struct iwl_mvm *mvm = IWL_OP_MODE_GET_MVM(op_mode); + + iwl_mvm_dump_nic_error_log(mvm); + + iwl_mvm_nic_restart(mvm); +} + static void iwl_mvm_cmd_queue_full(struct iwl_op_mode *op_mode) { + struct iwl_mvm *mvm = IWL_OP_MODE_GET_MVM(op_mode); + WARN_ON(1); + iwl_mvm_nic_restart(mvm); } static const struct iwl_op_mode_ops iwl_mvm_ops = { -- cgit v1.2.3-70-g09d2 From e07cbb536acb249db5fd63f6884354630ae875ad Mon Sep 17 00:00:00 2001 From: Dor Shaish Date: Wed, 27 Feb 2013 23:00:27 +0200 Subject: iwlwifi: mvm: Set valid TX antennas value before calib request We must set the valid TX antennas number in the ucode before sending the phy_cfg_cmd and request for calibrations. Signed-off-by: Dor Shaish Reviewed-by: Emmanuel Grumbach Signed-off-by: Johannes Berg --- drivers/net/wireless/iwlwifi/mvm/fw.c | 5 +++++ 1 file changed, 5 insertions(+) (limited to 'drivers/net') diff --git a/drivers/net/wireless/iwlwifi/mvm/fw.c b/drivers/net/wireless/iwlwifi/mvm/fw.c index d3d959db03a..e6d51a9069c 100644 --- a/drivers/net/wireless/iwlwifi/mvm/fw.c +++ b/drivers/net/wireless/iwlwifi/mvm/fw.c @@ -446,6 +446,11 @@ int iwl_run_init_mvm_ucode(struct iwl_mvm *mvm, bool read_nvm) ret = iwl_nvm_check_version(mvm->nvm_data, mvm->trans); WARN_ON(ret); + /* Send TX valid antennas before triggering calibrations */ + ret = iwl_send_tx_ant_cfg(mvm, mvm->nvm_data->valid_tx_ant); + if (ret) + goto error; + /* Override the calibrations from TLV and the const of fw */ iwl_set_default_calib_trigger(mvm); -- cgit v1.2.3-70-g09d2 From 6221d47cf7a57eb1e2b5b51c65e2edcde369a0d4 Mon Sep 17 00:00:00 2001 From: Dor Shaish Date: Wed, 27 Feb 2013 15:55:48 +0200 Subject: iwlwifi: mvm: Take the phy_cfg from the TLV value The phy_cfg is given from the TLV value and does not have to be built by us. Signed-off-by: Dor Shaish Reviewed-by: Emmanuel Grumbach Signed-off-by: Johannes Berg --- drivers/net/wireless/iwlwifi/mvm/fw.c | 16 +--------------- 1 file changed, 1 insertion(+), 15 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/wireless/iwlwifi/mvm/fw.c b/drivers/net/wireless/iwlwifi/mvm/fw.c index e6d51a9069c..d3c067e670a 100644 --- a/drivers/net/wireless/iwlwifi/mvm/fw.c +++ b/drivers/net/wireless/iwlwifi/mvm/fw.c @@ -241,20 +241,6 @@ static int iwl_mvm_load_ucode_wait_alive(struct iwl_mvm *mvm, return 0; } -#define IWL_HW_REV_ID_RAINBOW 0x2 -#define IWL_PROJ_TYPE_LHP 0x5 - -static u32 iwl_mvm_build_phy_cfg(struct iwl_mvm *mvm) -{ - struct iwl_nvm_data *data = mvm->nvm_data; - /* Temp calls to static definitions, will be changed to CSR calls */ - u8 hw_rev_id = IWL_HW_REV_ID_RAINBOW; - u8 project_type = IWL_PROJ_TYPE_LHP; - - return data->radio_cfg_dash | (data->radio_cfg_step << 2) | - (hw_rev_id << 4) | ((project_type & 0x7f) << 6) | - (data->valid_tx_ant << 16) | (data->valid_rx_ant << 20); -} static int iwl_send_phy_cfg_cmd(struct iwl_mvm *mvm) { @@ -262,7 +248,7 @@ static int iwl_send_phy_cfg_cmd(struct iwl_mvm *mvm) enum iwl_ucode_type ucode_type = mvm->cur_ucode; /* Set parameters */ - phy_cfg_cmd.phy_cfg = cpu_to_le32(iwl_mvm_build_phy_cfg(mvm)); + phy_cfg_cmd.phy_cfg = cpu_to_le32(mvm->fw->phy_config); phy_cfg_cmd.calib_control.event_trigger = mvm->fw->default_calib[ucode_type].event_trigger; phy_cfg_cmd.calib_control.flow_trigger = -- cgit v1.2.3-70-g09d2 From de8bc6dd2d52cacaa76ea381ffdc00919b100a2c Mon Sep 17 00:00:00 2001 From: Dor Shaish Date: Wed, 27 Feb 2013 13:01:09 +0200 Subject: iwlwifi: mvm: Remove overriding calibrations for the 7000 family This fix removes the override of calibration request values sent to the FW. Due to that, the sending of default values to now implemented calibrations is removed. Signed-off-by: Dor Shaish Reviewed-by: Emmanuel Grumbach Signed-off-by: Johannes Berg --- drivers/net/wireless/iwlwifi/mvm/fw.c | 114 ---------------------------------- 1 file changed, 114 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/wireless/iwlwifi/mvm/fw.c b/drivers/net/wireless/iwlwifi/mvm/fw.c index d3c067e670a..500f818dba0 100644 --- a/drivers/net/wireless/iwlwifi/mvm/fw.c +++ b/drivers/net/wireless/iwlwifi/mvm/fw.c @@ -79,17 +79,8 @@ #define UCODE_VALID_OK cpu_to_le32(0x1) /* Default calibration values for WkP - set to INIT image w/o running */ -static const u8 wkp_calib_values_bb_filter[] = { 0xbf, 0x00, 0x5f, 0x00, 0x2f, - 0x00, 0x18, 0x00 }; -static const u8 wkp_calib_values_rx_dc[] = { 0x7f, 0x7f, 0x7f, 0x7f, 0x7f, - 0x7f, 0x7f, 0x7f }; -static const u8 wkp_calib_values_tx_lo[] = { 0x00, 0x00, 0x00, 0x00 }; -static const u8 wkp_calib_values_tx_iq[] = { 0xff, 0x00, 0xff, 0x00, 0x00, - 0x00 }; -static const u8 wkp_calib_values_rx_iq[] = { 0xff, 0x00, 0x00, 0x00 }; static const u8 wkp_calib_values_rx_iq_skew[] = { 0x00, 0x00, 0x01, 0x00 }; static const u8 wkp_calib_values_tx_iq_skew[] = { 0x01, 0x00, 0x00, 0x00 }; -static const u8 wkp_calib_values_xtal[] = { 0xd2, 0xd2 }; struct iwl_calib_default_data { u16 size; @@ -99,12 +90,7 @@ struct iwl_calib_default_data { #define CALIB_SIZE_N_DATA(_buf) {.size = sizeof(_buf), .data = &_buf} static const struct iwl_calib_default_data wkp_calib_default_data[12] = { - [5] = CALIB_SIZE_N_DATA(wkp_calib_values_rx_dc), - [6] = CALIB_SIZE_N_DATA(wkp_calib_values_bb_filter), - [7] = CALIB_SIZE_N_DATA(wkp_calib_values_tx_lo), - [8] = CALIB_SIZE_N_DATA(wkp_calib_values_tx_iq), [9] = CALIB_SIZE_N_DATA(wkp_calib_values_tx_iq_skew), - [10] = CALIB_SIZE_N_DATA(wkp_calib_values_rx_iq), [11] = CALIB_SIZE_N_DATA(wkp_calib_values_rx_iq_skew), }; @@ -261,103 +247,6 @@ static int iwl_send_phy_cfg_cmd(struct iwl_mvm *mvm) sizeof(phy_cfg_cmd), &phy_cfg_cmd); } -/* Starting with the new PHY DB implementation - New calibs are enabled */ -/* Value - 0x405e7 */ -#define IWL_CALIB_DEFAULT_FLOW_INIT (IWL_CALIB_CFG_XTAL_IDX |\ - IWL_CALIB_CFG_TEMPERATURE_IDX |\ - IWL_CALIB_CFG_VOLTAGE_READ_IDX |\ - IWL_CALIB_CFG_DC_IDX |\ - IWL_CALIB_CFG_BB_FILTER_IDX |\ - IWL_CALIB_CFG_LO_LEAKAGE_IDX |\ - IWL_CALIB_CFG_TX_IQ_IDX |\ - IWL_CALIB_CFG_RX_IQ_IDX |\ - IWL_CALIB_CFG_AGC_IDX) - -#define IWL_CALIB_DEFAULT_EVENT_INIT 0x0 - -/* Value 0x41567 */ -#define IWL_CALIB_DEFAULT_FLOW_RUN (IWL_CALIB_CFG_XTAL_IDX |\ - IWL_CALIB_CFG_TEMPERATURE_IDX |\ - IWL_CALIB_CFG_VOLTAGE_READ_IDX |\ - IWL_CALIB_CFG_BB_FILTER_IDX |\ - IWL_CALIB_CFG_DC_IDX |\ - IWL_CALIB_CFG_TX_IQ_IDX |\ - IWL_CALIB_CFG_RX_IQ_IDX |\ - IWL_CALIB_CFG_SENSITIVITY_IDX |\ - IWL_CALIB_CFG_AGC_IDX) - -#define IWL_CALIB_DEFAULT_EVENT_RUN (IWL_CALIB_CFG_XTAL_IDX |\ - IWL_CALIB_CFG_TEMPERATURE_IDX |\ - IWL_CALIB_CFG_VOLTAGE_READ_IDX |\ - IWL_CALIB_CFG_TX_PWR_IDX |\ - IWL_CALIB_CFG_DC_IDX |\ - IWL_CALIB_CFG_TX_IQ_IDX |\ - IWL_CALIB_CFG_SENSITIVITY_IDX) - -/* - * Sets the calibrations trigger values that will be sent to the FW for runtime - * and init calibrations. - * The ones given in the FW TLV are not correct. - */ -static void iwl_set_default_calib_trigger(struct iwl_mvm *mvm) -{ - struct iwl_tlv_calib_ctrl default_calib; - - /* - * WkP FW TLV calib bits are wrong, overwrite them. - * This defines the dynamic calibrations which are implemented in the - * uCode both for init(flow) calculation and event driven calibs. - */ - - /* Init Image */ - default_calib.event_trigger = cpu_to_le32(IWL_CALIB_DEFAULT_EVENT_INIT); - default_calib.flow_trigger = cpu_to_le32(IWL_CALIB_DEFAULT_FLOW_INIT); - - if (default_calib.event_trigger != - mvm->fw->default_calib[IWL_UCODE_INIT].event_trigger) - IWL_ERR(mvm, - "Updating the event calib for INIT image: 0x%x -> 0x%x\n", - mvm->fw->default_calib[IWL_UCODE_INIT].event_trigger, - default_calib.event_trigger); - if (default_calib.flow_trigger != - mvm->fw->default_calib[IWL_UCODE_INIT].flow_trigger) - IWL_ERR(mvm, - "Updating the flow calib for INIT image: 0x%x -> 0x%x\n", - mvm->fw->default_calib[IWL_UCODE_INIT].flow_trigger, - default_calib.flow_trigger); - - memcpy((void *)&mvm->fw->default_calib[IWL_UCODE_INIT], - &default_calib, sizeof(struct iwl_tlv_calib_ctrl)); - IWL_ERR(mvm, - "Setting uCode init calibrations event 0x%x, trigger 0x%x\n", - default_calib.event_trigger, - default_calib.flow_trigger); - - /* Run time image */ - default_calib.event_trigger = cpu_to_le32(IWL_CALIB_DEFAULT_EVENT_RUN); - default_calib.flow_trigger = cpu_to_le32(IWL_CALIB_DEFAULT_FLOW_RUN); - - if (default_calib.event_trigger != - mvm->fw->default_calib[IWL_UCODE_REGULAR].event_trigger) - IWL_ERR(mvm, - "Updating the event calib for RT image: 0x%x -> 0x%x\n", - mvm->fw->default_calib[IWL_UCODE_REGULAR].event_trigger, - default_calib.event_trigger); - if (default_calib.flow_trigger != - mvm->fw->default_calib[IWL_UCODE_REGULAR].flow_trigger) - IWL_ERR(mvm, - "Updating the flow calib for RT image: 0x%x -> 0x%x\n", - mvm->fw->default_calib[IWL_UCODE_REGULAR].flow_trigger, - default_calib.flow_trigger); - - memcpy((void *)&mvm->fw->default_calib[IWL_UCODE_REGULAR], - &default_calib, sizeof(struct iwl_tlv_calib_ctrl)); - IWL_ERR(mvm, - "Setting uCode runtime calibs event 0x%x, trigger 0x%x\n", - default_calib.event_trigger, - default_calib.flow_trigger); -} - static int iwl_set_default_calibrations(struct iwl_mvm *mvm) { u8 cmd_raw[16]; /* holds the variable size commands */ @@ -437,9 +326,6 @@ int iwl_run_init_mvm_ucode(struct iwl_mvm *mvm, bool read_nvm) if (ret) goto error; - /* Override the calibrations from TLV and the const of fw */ - iwl_set_default_calib_trigger(mvm); - /* WkP doesn't have all calibrations, need to set default values */ if (mvm->cfg->device_family == IWL_DEVICE_FAMILY_7000) { ret = iwl_set_default_calibrations(mvm); -- cgit v1.2.3-70-g09d2 From f9aa8dd33714f17c7229ad89309406a1ccb3cd3f Mon Sep 17 00:00:00 2001 From: Emmanuel Grumbach Date: Mon, 4 Mar 2013 09:11:08 +0200 Subject: iwlwifi: mvm: ignore STOP_AGG when restarting Since the device is being restarted, all the Rx / Tx Block Ack sessions are been wiped out by the driver. So ignore the requests from mac80211 that stops Tx agg while reconfiguring the device. Note that stopping a non-existing Rx BA session is harmless, so just honor mac80211's request. Signed-off-by: Emmanuel Grumbach Signed-off-by: Johannes Berg --- drivers/net/wireless/iwlwifi/mvm/sta.c | 10 ++++++++++ 1 file changed, 10 insertions(+) (limited to 'drivers/net') diff --git a/drivers/net/wireless/iwlwifi/mvm/sta.c b/drivers/net/wireless/iwlwifi/mvm/sta.c index 861a7f9f8e7..274f44e2ef6 100644 --- a/drivers/net/wireless/iwlwifi/mvm/sta.c +++ b/drivers/net/wireless/iwlwifi/mvm/sta.c @@ -770,6 +770,16 @@ int iwl_mvm_sta_tx_agg_stop(struct iwl_mvm *mvm, struct ieee80211_vif *vif, u16 txq_id; int err; + + /* + * If mac80211 is cleaning its state, then say that we finished since + * our state has been cleared anyway. + */ + if (test_bit(IWL_MVM_STATUS_IN_HW_RESTART, &mvm->status)) { + ieee80211_stop_tx_ba_cb_irqsafe(vif, sta->addr, tid); + return 0; + } + spin_lock_bh(&mvmsta->lock); txq_id = tid_data->txq_id; -- cgit v1.2.3-70-g09d2 From 8101a7f0656bf11c385d6e14f52313b19f017e70 Mon Sep 17 00:00:00 2001 From: Emmanuel Grumbach Date: Thu, 28 Feb 2013 11:54:28 +0200 Subject: iwlwifi: mvm: update the rssi calculation Make the rssi more accurate by taking in count per-chain AGC values. Without this, the RSSI reports inaccurate values. Signed-off-by: Emmanuel Grumbach Signed-off-by: Johannes Berg --- drivers/net/wireless/iwlwifi/mvm/fw-api.h | 18 ++++++++------- drivers/net/wireless/iwlwifi/mvm/mvm.h | 3 ++- drivers/net/wireless/iwlwifi/mvm/rx.c | 37 +++++++++++++++++++------------ 3 files changed, 35 insertions(+), 23 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/wireless/iwlwifi/mvm/fw-api.h b/drivers/net/wireless/iwlwifi/mvm/fw-api.h index 23eebda848b..2adb61f103f 100644 --- a/drivers/net/wireless/iwlwifi/mvm/fw-api.h +++ b/drivers/net/wireless/iwlwifi/mvm/fw-api.h @@ -762,18 +762,20 @@ struct iwl_phy_context_cmd { #define IWL_RX_INFO_PHY_CNT 8 #define IWL_RX_INFO_AGC_IDX 1 #define IWL_RX_INFO_RSSI_AB_IDX 2 -#define IWL_RX_INFO_RSSI_C_IDX 3 -#define IWL_OFDM_AGC_DB_MSK 0xfe00 -#define IWL_OFDM_AGC_DB_POS 9 +#define IWL_OFDM_AGC_A_MSK 0x0000007f +#define IWL_OFDM_AGC_A_POS 0 +#define IWL_OFDM_AGC_B_MSK 0x00003f80 +#define IWL_OFDM_AGC_B_POS 7 +#define IWL_OFDM_AGC_CODE_MSK 0x3fe00000 +#define IWL_OFDM_AGC_CODE_POS 20 #define IWL_OFDM_RSSI_INBAND_A_MSK 0x00ff -#define IWL_OFDM_RSSI_ALLBAND_A_MSK 0xff00 #define IWL_OFDM_RSSI_A_POS 0 +#define IWL_OFDM_RSSI_ALLBAND_A_MSK 0xff00 +#define IWL_OFDM_RSSI_ALLBAND_A_POS 8 #define IWL_OFDM_RSSI_INBAND_B_MSK 0xff0000 -#define IWL_OFDM_RSSI_ALLBAND_B_MSK 0xff000000 #define IWL_OFDM_RSSI_B_POS 16 -#define IWL_OFDM_RSSI_INBAND_C_MSK 0x00ff -#define IWL_OFDM_RSSI_ALLBAND_C_MSK 0xff00 -#define IWL_OFDM_RSSI_C_POS 0 +#define IWL_OFDM_RSSI_ALLBAND_B_MSK 0xff000000 +#define IWL_OFDM_RSSI_ALLBAND_B_POS 24 /** * struct iwl_rx_phy_info - phy info diff --git a/drivers/net/wireless/iwlwifi/mvm/mvm.h b/drivers/net/wireless/iwlwifi/mvm/mvm.h index 537711b1047..bdae700c769 100644 --- a/drivers/net/wireless/iwlwifi/mvm/mvm.h +++ b/drivers/net/wireless/iwlwifi/mvm/mvm.h @@ -80,7 +80,8 @@ #define IWL_INVALID_MAC80211_QUEUE 0xff #define IWL_MVM_MAX_ADDRESSES 2 -#define IWL_RSSI_OFFSET 44 +/* RSSI offset for WkP */ +#define IWL_RSSI_OFFSET 50 enum iwl_mvm_tx_fifo { IWL_MVM_TX_FIFO_BK = 0, diff --git a/drivers/net/wireless/iwlwifi/mvm/rx.c b/drivers/net/wireless/iwlwifi/mvm/rx.c index 3f40ab05bbd..b0b190d0ec2 100644 --- a/drivers/net/wireless/iwlwifi/mvm/rx.c +++ b/drivers/net/wireless/iwlwifi/mvm/rx.c @@ -131,33 +131,42 @@ static void iwl_mvm_pass_packet_to_mac80211(struct iwl_mvm *mvm, static int iwl_mvm_calc_rssi(struct iwl_mvm *mvm, struct iwl_rx_phy_info *phy_info) { - u32 rssi_a, rssi_b, rssi_c, max_rssi, agc_db; + int rssi_a, rssi_b, rssi_a_dbm, rssi_b_dbm, max_rssi_dbm; + int rssi_all_band_a, rssi_all_band_b; + u32 agc_a, agc_b, max_agc; u32 val; - /* Find max rssi among 3 possible receivers. + /* Find max rssi among 2 possible receivers. * These values are measured by the Digital Signal Processor (DSP). * They should stay fairly constant even as the signal strength varies, * if the radio's Automatic Gain Control (AGC) is working right. * AGC value (see below) will provide the "interesting" info. */ + val = le32_to_cpu(phy_info->non_cfg_phy[IWL_RX_INFO_AGC_IDX]); + agc_a = (val & IWL_OFDM_AGC_A_MSK) >> IWL_OFDM_AGC_A_POS; + agc_b = (val & IWL_OFDM_AGC_B_MSK) >> IWL_OFDM_AGC_B_POS; + max_agc = max_t(u32, agc_a, agc_b); + val = le32_to_cpu(phy_info->non_cfg_phy[IWL_RX_INFO_RSSI_AB_IDX]); rssi_a = (val & IWL_OFDM_RSSI_INBAND_A_MSK) >> IWL_OFDM_RSSI_A_POS; rssi_b = (val & IWL_OFDM_RSSI_INBAND_B_MSK) >> IWL_OFDM_RSSI_B_POS; - val = le32_to_cpu(phy_info->non_cfg_phy[IWL_RX_INFO_RSSI_C_IDX]); - rssi_c = (val & IWL_OFDM_RSSI_INBAND_C_MSK) >> IWL_OFDM_RSSI_C_POS; - - val = le32_to_cpu(phy_info->non_cfg_phy[IWL_RX_INFO_AGC_IDX]); - agc_db = (val & IWL_OFDM_AGC_DB_MSK) >> IWL_OFDM_AGC_DB_POS; + rssi_all_band_a = (val & IWL_OFDM_RSSI_ALLBAND_A_MSK) >> + IWL_OFDM_RSSI_ALLBAND_A_POS; + rssi_all_band_b = (val & IWL_OFDM_RSSI_ALLBAND_B_MSK) >> + IWL_OFDM_RSSI_ALLBAND_B_POS; - max_rssi = max_t(u32, rssi_a, rssi_b); - max_rssi = max_t(u32, max_rssi, rssi_c); + /* + * dBm = rssi dB - agc dB - constant. + * Higher AGC (higher radio gain) means lower signal. + */ + rssi_a_dbm = rssi_a - IWL_RSSI_OFFSET - agc_a; + rssi_b_dbm = rssi_b - IWL_RSSI_OFFSET - agc_b; + max_rssi_dbm = max_t(int, rssi_a_dbm, rssi_b_dbm); - IWL_DEBUG_STATS(mvm, "Rssi In A %d B %d C %d Max %d AGC dB %d\n", - rssi_a, rssi_b, rssi_c, max_rssi, agc_db); + IWL_DEBUG_STATS(mvm, "Rssi In A %d B %d Max %d AGCA %d AGCB %d\n", + rssi_a_dbm, rssi_b_dbm, max_rssi_dbm, agc_a, agc_b); - /* dBm = max_rssi dB - agc dB - constant. - * Higher AGC (higher radio gain) means lower signal. */ - return max_rssi - agc_db - IWL_RSSI_OFFSET; + return max_rssi_dbm; } /* -- cgit v1.2.3-70-g09d2 From 2470b36e84a2e680d7a7e3809cbceae5bfae3606 Mon Sep 17 00:00:00 2001 From: Emmanuel Grumbach Date: Sun, 3 Mar 2013 14:35:03 +0200 Subject: iwlwifi: mvm: don't warn on normal BAR sending This flow happens when we get a failed single Tx response on an AMPDU queue. In this case, the frame won't be sent any more. So we need to move the window on the recipient side. This is done by a BAR. Now if we are in the following case: 10, 12 and 13 are ACKed and 11 isn't. 10 11 12 13. V X V V Then, 11 will be sent 16 times as an MPDU (as oppsed to A-MPDU). If this failed, we are entering the flow described above. So we need to send a BAR with ssn = 12. But in this case, the scheduler will tell us to free frames up to 13 (included). So, it is perfectly possible to get a failed single Tx response on an AMPDU queue that makes the scheduler's ssn jump by more than 1 single packet. Signed-off-by: Emmanuel Grumbach Signed-off-by: Johannes Berg --- drivers/net/wireless/iwlwifi/mvm/tx.c | 6 +----- 1 file changed, 1 insertion(+), 5 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/wireless/iwlwifi/mvm/tx.c b/drivers/net/wireless/iwlwifi/mvm/tx.c index 6b67ce3f679..6645efe5c03 100644 --- a/drivers/net/wireless/iwlwifi/mvm/tx.c +++ b/drivers/net/wireless/iwlwifi/mvm/tx.c @@ -607,12 +607,8 @@ static void iwl_mvm_rx_tx_cmd_single(struct iwl_mvm *mvm, /* Single frame failure in an AMPDU queue => send BAR */ if (txq_id >= IWL_FIRST_AMPDU_QUEUE && - !(info->flags & IEEE80211_TX_STAT_ACK)) { - /* there must be only one skb in the skb_list */ - WARN_ON_ONCE(skb_freed > 1 || - !skb_queue_empty(&skbs)); + !(info->flags & IEEE80211_TX_STAT_ACK)) info->flags |= IEEE80211_TX_STAT_AMPDU_NO_BACK; - } /* W/A FW bug: seq_ctl is wrong when the queue is flushed */ if (status == TX_STATUS_FAIL_FIFO_FLUSHED) { -- cgit v1.2.3-70-g09d2 From e08f626b33eb636dbf38b21618ab32b7fd8e1ec4 Mon Sep 17 00:00:00 2001 From: Bruce Allan Date: Wed, 20 Feb 2013 03:06:34 +0000 Subject: e1000e: workaround DMA unit hang on I218 At 1000Mbps link speed, one of the MAC's internal clocks can be stopped for up to 4us when entering K1 (a power mode of the MAC-PHY interconnect). If the MAC is waiting for completion indications for 2 DMA write requests into Host memory (e.g. descriptor writeback or Rx packet writing) and the indications occur while the clock is stopped, both indications will be missed by the MAC causing the MAC to wait for the completion indications and be unable to generate further DMA write requests. This results in an apparent hardware hang. Work-around the issue by disabling the de-assertion of the clock request when 1000Mbps link is acquired (K1 must be disabled while doing this). Signed-off-by: Bruce Allan Tested-by: Jeff Pieper Signed-off-by: Jeff Kirsher --- drivers/net/ethernet/intel/e1000e/ich8lan.c | 71 ++++++++++++++++++++++++++++- drivers/net/ethernet/intel/e1000e/ich8lan.h | 2 + drivers/net/ethernet/intel/e1000e/regs.h | 1 + 3 files changed, 73 insertions(+), 1 deletion(-) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/intel/e1000e/ich8lan.c b/drivers/net/ethernet/intel/e1000e/ich8lan.c index dff7bff8b8e..121a865c7fb 100644 --- a/drivers/net/ethernet/intel/e1000e/ich8lan.c +++ b/drivers/net/ethernet/intel/e1000e/ich8lan.c @@ -781,6 +781,59 @@ release: return ret_val; } +/** + * e1000_k1_workaround_lpt_lp - K1 workaround on Lynxpoint-LP + * @hw: pointer to the HW structure + * @link: link up bool flag + * + * When K1 is enabled for 1Gbps, the MAC can miss 2 DMA completion indications + * preventing further DMA write requests. Workaround the issue by disabling + * the de-assertion of the clock request when in 1Gpbs mode. + **/ +static s32 e1000_k1_workaround_lpt_lp(struct e1000_hw *hw, bool link) +{ + u32 fextnvm6 = er32(FEXTNVM6); + s32 ret_val = 0; + + if (link && (er32(STATUS) & E1000_STATUS_SPEED_1000)) { + u16 kmrn_reg; + + ret_val = hw->phy.ops.acquire(hw); + if (ret_val) + return ret_val; + + ret_val = + e1000e_read_kmrn_reg_locked(hw, E1000_KMRNCTRLSTA_K1_CONFIG, + &kmrn_reg); + if (ret_val) + goto release; + + ret_val = + e1000e_write_kmrn_reg_locked(hw, + E1000_KMRNCTRLSTA_K1_CONFIG, + kmrn_reg & + ~E1000_KMRNCTRLSTA_K1_ENABLE); + if (ret_val) + goto release; + + usleep_range(10, 20); + + ew32(FEXTNVM6, fextnvm6 | E1000_FEXTNVM6_REQ_PLL_CLK); + + ret_val = + e1000e_write_kmrn_reg_locked(hw, + E1000_KMRNCTRLSTA_K1_CONFIG, + kmrn_reg); +release: + hw->phy.ops.release(hw); + } else { + /* clear FEXTNVM6 bit 8 on link down or 10/100 */ + ew32(FEXTNVM6, fextnvm6 & ~E1000_FEXTNVM6_REQ_PLL_CLK); + } + + return ret_val; +} + /** * e1000_check_for_copper_link_ich8lan - Check for link (Copper) * @hw: pointer to the HW structure @@ -818,6 +871,14 @@ static s32 e1000_check_for_copper_link_ich8lan(struct e1000_hw *hw) return ret_val; } + /* Work-around I218 hang issue */ + if ((hw->adapter->pdev->device == E1000_DEV_ID_PCH_LPTLP_I218_LM) || + (hw->adapter->pdev->device == E1000_DEV_ID_PCH_LPTLP_I218_V)) { + ret_val = e1000_k1_workaround_lpt_lp(hw, link); + if (ret_val) + return ret_val; + } + /* Clear link partner's EEE ability */ hw->dev_spec.ich8lan.eee_lp_ability = 0; @@ -3954,8 +4015,16 @@ void e1000_suspend_workarounds_ich8lan(struct e1000_hw *hw) phy_ctrl = er32(PHY_CTRL); phy_ctrl |= E1000_PHY_CTRL_GBE_DISABLE; + if (hw->phy.type == e1000_phy_i217) { - u16 phy_reg; + u16 phy_reg, device_id = hw->adapter->pdev->device; + + if ((device_id == E1000_DEV_ID_PCH_LPTLP_I218_LM) || + (device_id == E1000_DEV_ID_PCH_LPTLP_I218_V)) { + u32 fextnvm6 = er32(FEXTNVM6); + + ew32(FEXTNVM6, fextnvm6 & ~E1000_FEXTNVM6_REQ_PLL_CLK); + } ret_val = hw->phy.ops.acquire(hw); if (ret_val) diff --git a/drivers/net/ethernet/intel/e1000e/ich8lan.h b/drivers/net/ethernet/intel/e1000e/ich8lan.h index b6d3174d7d2..8bf4655c2e1 100644 --- a/drivers/net/ethernet/intel/e1000e/ich8lan.h +++ b/drivers/net/ethernet/intel/e1000e/ich8lan.h @@ -92,6 +92,8 @@ #define E1000_FEXTNVM4_BEACON_DURATION_8USEC 0x7 #define E1000_FEXTNVM4_BEACON_DURATION_16USEC 0x3 +#define E1000_FEXTNVM6_REQ_PLL_CLK 0x00000100 + #define PCIE_ICH8_SNOOP_ALL PCIE_NO_SNOOP_ALL #define E1000_ICH_RAR_ENTRIES 7 diff --git a/drivers/net/ethernet/intel/e1000e/regs.h b/drivers/net/ethernet/intel/e1000e/regs.h index 794fe149766..a7e6a3e3725 100644 --- a/drivers/net/ethernet/intel/e1000e/regs.h +++ b/drivers/net/ethernet/intel/e1000e/regs.h @@ -42,6 +42,7 @@ #define E1000_FEXTNVM 0x00028 /* Future Extended NVM - RW */ #define E1000_FEXTNVM3 0x0003C /* Future Extended NVM 3 - RW */ #define E1000_FEXTNVM4 0x00024 /* Future Extended NVM 4 - RW */ +#define E1000_FEXTNVM6 0x00010 /* Future Extended NVM 6 - RW */ #define E1000_FEXTNVM7 0x000E4 /* Future Extended NVM 7 - RW */ #define E1000_FCT 0x00030 /* Flow Control Type - RW */ #define E1000_VET 0x00038 /* VLAN Ether Type - RW */ -- cgit v1.2.3-70-g09d2 From e4f7dbb17e797d922d72567f37de3735722034ba Mon Sep 17 00:00:00 2001 From: Alexander Duyck Date: Thu, 21 Feb 2013 03:08:50 +0000 Subject: igb: Drop BUILD_BUG_ON check from igb_build_rx_buffer On s390 the igb driver was throwing a build error due to the fact that a frame built using build_skb would be larger than 2K. Since this is not likely to change at any point in the future we are better off just dropping the check since we already had a check in igb_set_rx_buffer_len that will just disable the usage of build_skb anyway. Signed-off-by: Alexander Duyck Tested-by: Aaron Brown Signed-off-by: Jeff Kirsher --- drivers/net/ethernet/intel/igb/igb_main.c | 7 ------- 1 file changed, 7 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/intel/igb/igb_main.c b/drivers/net/ethernet/intel/igb/igb_main.c index ed79a1c53b5..4d53a17959f 100644 --- a/drivers/net/ethernet/intel/igb/igb_main.c +++ b/drivers/net/ethernet/intel/igb/igb_main.c @@ -6227,13 +6227,6 @@ static struct sk_buff *igb_build_rx_buffer(struct igb_ring *rx_ring, /* If we spanned a buffer we have a huge mess so test for it */ BUG_ON(unlikely(!igb_test_staterr(rx_desc, E1000_RXD_STAT_EOP))); - /* Guarantee this function can be used by verifying buffer sizes */ - BUILD_BUG_ON(SKB_WITH_OVERHEAD(IGB_RX_BUFSZ) < (NET_SKB_PAD + - NET_IP_ALIGN + - IGB_TS_HDR_LEN + - ETH_FRAME_LEN + - ETH_FCS_LEN)); - rx_buffer = &rx_ring->rx_buffer_info[rx_ring->next_to_clean]; page = rx_buffer->page; prefetchw(page); -- cgit v1.2.3-70-g09d2 From ed65bdd8c0086d69948e6380dba0cc279a6906de Mon Sep 17 00:00:00 2001 From: Carolyn Wyborny Date: Wed, 6 Feb 2013 03:35:27 +0000 Subject: igb: Fix link setup for I210 devices This patch changes the setup copper link function to use a switch statement for the PHY id's available for the given PHY types. It also adds a case for the I210 PHY id, so the appropriate setup link function is called for it. Signed-off-by: Carolyn Wyborny Tested-by: Aaron Brown Signed-off-by: Jeff Kirsher --- drivers/net/ethernet/intel/igb/e1000_82575.c | 11 ++++++++--- 1 file changed, 8 insertions(+), 3 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/intel/igb/e1000_82575.c b/drivers/net/ethernet/intel/igb/e1000_82575.c index 84e7e0909de..b64542acfa3 100644 --- a/drivers/net/ethernet/intel/igb/e1000_82575.c +++ b/drivers/net/ethernet/intel/igb/e1000_82575.c @@ -1361,11 +1361,16 @@ static s32 igb_setup_copper_link_82575(struct e1000_hw *hw) switch (hw->phy.type) { case e1000_phy_i210: case e1000_phy_m88: - if (hw->phy.id == I347AT4_E_PHY_ID || - hw->phy.id == M88E1112_E_PHY_ID) + switch (hw->phy.id) { + case I347AT4_E_PHY_ID: + case M88E1112_E_PHY_ID: + case I210_I_PHY_ID: ret_val = igb_copper_link_setup_m88_gen2(hw); - else + break; + default: ret_val = igb_copper_link_setup_m88(hw); + break; + } break; case e1000_phy_igp_3: ret_val = igb_copper_link_setup_igp(hw); -- cgit v1.2.3-70-g09d2 From 603e86fa39cd48edba5ee8a4d19637bd41e2a8bf Mon Sep 17 00:00:00 2001 From: Carolyn Wyborny Date: Wed, 20 Feb 2013 07:40:55 +0000 Subject: igb: Fix for lockdep issue in igb_get_i2c_client This patch fixes a lockdep warning in igb_get_i2c_client by refactoring the initialization and usage of the i2c_client completely. There is no on the fly allocation of the single client needed today. Signed-off-by: Carolyn Wyborny Tested-by: Aaron Brown Signed-off-by: Jeff Kirsher --- drivers/net/ethernet/intel/igb/igb.h | 2 +- drivers/net/ethernet/intel/igb/igb_hwmon.c | 14 ++++++ drivers/net/ethernet/intel/igb/igb_main.c | 69 +----------------------------- 3 files changed, 17 insertions(+), 68 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/intel/igb/igb.h b/drivers/net/ethernet/intel/igb/igb.h index d27edbc6392..25151401c2a 100644 --- a/drivers/net/ethernet/intel/igb/igb.h +++ b/drivers/net/ethernet/intel/igb/igb.h @@ -447,7 +447,7 @@ struct igb_adapter { #endif struct i2c_algo_bit_data i2c_algo; struct i2c_adapter i2c_adap; - struct igb_i2c_client_list *i2c_clients; + struct i2c_client *i2c_client; }; #define IGB_FLAG_HAS_MSI (1 << 0) diff --git a/drivers/net/ethernet/intel/igb/igb_hwmon.c b/drivers/net/ethernet/intel/igb/igb_hwmon.c index 0a9b073d0b0..4623502054d 100644 --- a/drivers/net/ethernet/intel/igb/igb_hwmon.c +++ b/drivers/net/ethernet/intel/igb/igb_hwmon.c @@ -39,6 +39,10 @@ #include #ifdef CONFIG_IGB_HWMON +struct i2c_board_info i350_sensor_info = { + I2C_BOARD_INFO("i350bb", (0Xf8 >> 1)), +}; + /* hwmon callback functions */ static ssize_t igb_hwmon_show_location(struct device *dev, struct device_attribute *attr, @@ -188,6 +192,7 @@ int igb_sysfs_init(struct igb_adapter *adapter) unsigned int i; int n_attrs; int rc = 0; + struct i2c_client *client = NULL; /* If this method isn't defined we don't support thermals */ if (adapter->hw.mac.ops.init_thermal_sensor_thresh == NULL) @@ -198,6 +203,15 @@ int igb_sysfs_init(struct igb_adapter *adapter) if (rc) goto exit; + /* init i2c_client */ + client = i2c_new_device(&adapter->i2c_adap, &i350_sensor_info); + if (client == NULL) { + dev_info(&adapter->pdev->dev, + "Failed to create new i2c device..\n"); + goto exit; + } + adapter->i2c_client = client; + /* Allocation space for max attributes * max num sensors * values (loc, temp, max, caution) */ diff --git a/drivers/net/ethernet/intel/igb/igb_main.c b/drivers/net/ethernet/intel/igb/igb_main.c index 4d53a17959f..4dbd62968c7 100644 --- a/drivers/net/ethernet/intel/igb/igb_main.c +++ b/drivers/net/ethernet/intel/igb/igb_main.c @@ -1923,10 +1923,6 @@ void igb_set_fw_version(struct igb_adapter *adapter) return; } -static const struct i2c_board_info i350_sensor_info = { - I2C_BOARD_INFO("i350bb", 0Xf8), -}; - /* igb_init_i2c - Init I2C interface * @adapter: pointer to adapter structure * @@ -7717,67 +7713,6 @@ static void igb_init_dmac(struct igb_adapter *adapter, u32 pba) } } -static DEFINE_SPINLOCK(i2c_clients_lock); - -/* igb_get_i2c_client - returns matching client - * in adapters's client list. - * @adapter: adapter struct - * @dev_addr: device address of i2c needed. - */ -static struct i2c_client * -igb_get_i2c_client(struct igb_adapter *adapter, u8 dev_addr) -{ - ulong flags; - struct igb_i2c_client_list *client_list; - struct i2c_client *client = NULL; - struct i2c_board_info client_info = { - I2C_BOARD_INFO("igb", 0x00), - }; - - spin_lock_irqsave(&i2c_clients_lock, flags); - client_list = adapter->i2c_clients; - - /* See if we already have an i2c_client */ - while (client_list) { - if (client_list->client->addr == (dev_addr >> 1)) { - client = client_list->client; - goto exit; - } else { - client_list = client_list->next; - } - } - - /* no client_list found, create a new one */ - client_list = kzalloc(sizeof(*client_list), GFP_ATOMIC); - if (client_list == NULL) - goto exit; - - /* dev_addr passed to us is left-shifted by 1 bit - * i2c_new_device call expects it to be flush to the right. - */ - client_info.addr = dev_addr >> 1; - client_info.platform_data = adapter; - client_list->client = i2c_new_device(&adapter->i2c_adap, &client_info); - if (client_list->client == NULL) { - dev_info(&adapter->pdev->dev, - "Failed to create new i2c device..\n"); - goto err_no_client; - } - - /* insert new client at head of list */ - client_list->next = adapter->i2c_clients; - adapter->i2c_clients = client_list; - - client = client_list->client; - goto exit; - -err_no_client: - kfree(client_list); -exit: - spin_unlock_irqrestore(&i2c_clients_lock, flags); - return client; -} - /* igb_read_i2c_byte - Reads 8 bit word over I2C * @hw: pointer to hardware structure * @byte_offset: byte offset to read @@ -7791,7 +7726,7 @@ s32 igb_read_i2c_byte(struct e1000_hw *hw, u8 byte_offset, u8 dev_addr, u8 *data) { struct igb_adapter *adapter = container_of(hw, struct igb_adapter, hw); - struct i2c_client *this_client = igb_get_i2c_client(adapter, dev_addr); + struct i2c_client *this_client = adapter->i2c_client; s32 status; u16 swfw_mask = 0; @@ -7828,7 +7763,7 @@ s32 igb_write_i2c_byte(struct e1000_hw *hw, u8 byte_offset, u8 dev_addr, u8 data) { struct igb_adapter *adapter = container_of(hw, struct igb_adapter, hw); - struct i2c_client *this_client = igb_get_i2c_client(adapter, dev_addr); + struct i2c_client *this_client = adapter->i2c_client; s32 status; u16 swfw_mask = E1000_SWFW_PHY0_SM; -- cgit v1.2.3-70-g09d2 From 88c4c066c6b4db26dc4909ee94e6bf377e8e8e81 Mon Sep 17 00:00:00 2001 From: Zang MingJie Date: Mon, 4 Mar 2013 06:07:34 +0000 Subject: reset nf before xmit vxlan encapsulated packet We should reset nf settings bond to the skb as ipip/ipgre do. If not, the conntrack/nat info bond to the origin packet may continually redirect the packet to vxlan interface causing a routing loop. this is the scenario: VETP VXLAN Gateway /----\ /---------------\ | | | | | vx+--+vx --NAT-> eth0+--> Internet | | | | \----/ \---------------/ when there are any packet coming from internet to the vetp, there will be lots of garbage packets coming out the gateway's vxlan interface, but none actually sent to the physical interface, because they are redirected back to the vxlan interface in the postrouting chain of NAT rule, and dmesg complains: Mar 1 21:52:53 debian kernel: [ 8802.997699] Dead loop on virtual device vxlan0, fix it urgently! Mar 1 21:52:54 debian kernel: [ 8804.004907] Dead loop on virtual device vxlan0, fix it urgently! Mar 1 21:52:55 debian kernel: [ 8805.012189] Dead loop on virtual device vxlan0, fix it urgently! Mar 1 21:52:56 debian kernel: [ 8806.020593] Dead loop on virtual device vxlan0, fix it urgently! the patch should fix the problem Signed-off-by: Zang MingJie Signed-off-by: David S. Miller --- drivers/net/vxlan.c | 2 ++ 1 file changed, 2 insertions(+) (limited to 'drivers/net') diff --git a/drivers/net/vxlan.c b/drivers/net/vxlan.c index f10e58ac9c1..c3e3d2929ee 100644 --- a/drivers/net/vxlan.c +++ b/drivers/net/vxlan.c @@ -961,6 +961,8 @@ static netdev_tx_t vxlan_xmit(struct sk_buff *skb, struct net_device *dev) iph->ttl = ttl ? : ip4_dst_hoplimit(&rt->dst); tunnel_ip_select_ident(skb, old_iph, &rt->dst); + nf_reset(skb); + vxlan_set_owner(dev, skb); /* See iptunnel_xmit() */ -- cgit v1.2.3-70-g09d2 From 66d29cbc59433ba538922a9e958495156b31b83b Mon Sep 17 00:00:00 2001 From: Gavin Shan Date: Sun, 3 Mar 2013 21:48:46 +0000 Subject: benet: Wait f/w POST until timeout While PCI card faces EEH errors, reset (usually hot reset) is expected to recover from the EEH errors. After EEH core finishes the reset, the driver callback (be_eeh_reset) is called and wait the firmware to complete POST successfully. The original code would return with error once detecting failure during POST stage. That seems not enough. The patch forces the driver (be_eeh_reset) to wait the firmware completes POST until timeout, instead of returning error upon detection POST failure immediately. Also, it would improve the reliability of the EEH funtionality of the driver. Signed-off-by: Gavin Shan Acked-by: Sathya Perla Signed-off-by: David S. Miller --- drivers/net/ethernet/emulex/benet/be_cmds.c | 27 ++++++++++----------------- 1 file changed, 10 insertions(+), 17 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/emulex/benet/be_cmds.c b/drivers/net/ethernet/emulex/benet/be_cmds.c index 071aea79d21..813407f66c7 100644 --- a/drivers/net/ethernet/emulex/benet/be_cmds.c +++ b/drivers/net/ethernet/emulex/benet/be_cmds.c @@ -473,7 +473,7 @@ static int be_mbox_notify_wait(struct be_adapter *adapter) return 0; } -static int be_POST_stage_get(struct be_adapter *adapter, u16 *stage) +static void be_POST_stage_get(struct be_adapter *adapter, u16 *stage) { u32 sem; u32 reg = skyhawk_chip(adapter) ? SLIPORT_SEMAPHORE_OFFSET_SH : @@ -481,11 +481,6 @@ static int be_POST_stage_get(struct be_adapter *adapter, u16 *stage) pci_read_config_dword(adapter->pdev, reg, &sem); *stage = sem & POST_STAGE_MASK; - - if ((sem >> POST_ERR_SHIFT) & POST_ERR_MASK) - return -1; - else - return 0; } int lancer_wait_ready(struct be_adapter *adapter) @@ -579,19 +574,17 @@ int be_fw_wait_ready(struct be_adapter *adapter) } do { - status = be_POST_stage_get(adapter, &stage); - if (status) { - dev_err(dev, "POST error; stage=0x%x\n", stage); - return -1; - } else if (stage != POST_STAGE_ARMFW_RDY) { - if (msleep_interruptible(2000)) { - dev_err(dev, "Waiting for POST aborted\n"); - return -EINTR; - } - timeout += 2; - } else { + be_POST_stage_get(adapter, &stage); + if (stage == POST_STAGE_ARMFW_RDY) return 0; + + dev_info(dev, "Waiting for POST, %ds elapsed\n", + timeout); + if (msleep_interruptible(2000)) { + dev_err(dev, "Waiting for POST aborted\n"); + return -EINTR; } + timeout += 2; } while (timeout < 60); dev_err(dev, "POST timeout; stage=0x%x\n", stage); -- cgit v1.2.3-70-g09d2 From 35205b211c8d17a8a0b5e8926cb7c73e9a7ef1ad Mon Sep 17 00:00:00 2001 From: Ben Hutchings Date: Tue, 5 Mar 2013 01:03:47 +0000 Subject: sfc: Disable soft interrupt handling during efx_device_detach_sync() efx_device_detach_sync() locks all TX queues before marking the device detached and thus disabling further TX scheduling. But it can still be interrupted by TX completions which then result in TX scheduling in soft interrupt context. This will deadlock when it tries to acquire a TX queue lock that efx_device_detach_sync() already acquired. To avoid deadlock, we must use netif_tx_{,un}lock_bh(). Signed-off-by: Ben Hutchings --- drivers/net/ethernet/sfc/efx.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/sfc/efx.h b/drivers/net/ethernet/sfc/efx.h index 50247dfe8f5..d2f790df6dc 100644 --- a/drivers/net/ethernet/sfc/efx.h +++ b/drivers/net/ethernet/sfc/efx.h @@ -171,9 +171,9 @@ static inline void efx_device_detach_sync(struct efx_nic *efx) * TX scheduler is stopped when we're done and before * netif_device_present() becomes false. */ - netif_tx_lock(dev); + netif_tx_lock_bh(dev); netif_device_detach(dev); - netif_tx_unlock(dev); + netif_tx_unlock_bh(dev); } #endif /* EFX_EFX_H */ -- cgit v1.2.3-70-g09d2 From c73e787a8db9117d59b5180baf83203a42ecadca Mon Sep 17 00:00:00 2001 From: Ben Hutchings Date: Tue, 5 Mar 2013 17:49:39 +0000 Subject: sfc: Correct efx_rx_buffer::page_offset when EFX_PAGE_IP_ALIGN != 0 RX DMA buffers start at an offset of EFX_PAGE_IP_ALIGN bytes from the start of a cache line. This offset obviously needs to be included in the virtual address, but this was missed in commit b590ace09d51 ('sfc: Fix efx_rx_buf_offset() in the presence of swiotlb') since EFX_PAGE_IP_ALIGN is equal to 0 on both x86 and powerpc. Signed-off-by: Ben Hutchings --- drivers/net/ethernet/sfc/rx.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/sfc/rx.c b/drivers/net/ethernet/sfc/rx.c index 879ff5849bb..bb579a6128c 100644 --- a/drivers/net/ethernet/sfc/rx.c +++ b/drivers/net/ethernet/sfc/rx.c @@ -215,7 +215,7 @@ static int efx_init_rx_buffers_page(struct efx_rx_queue *rx_queue) rx_buf = efx_rx_buffer(rx_queue, index); rx_buf->dma_addr = dma_addr + EFX_PAGE_IP_ALIGN; rx_buf->u.page = page; - rx_buf->page_offset = page_offset; + rx_buf->page_offset = page_offset + EFX_PAGE_IP_ALIGN; rx_buf->len = efx->rx_buffer_len - EFX_PAGE_IP_ALIGN; rx_buf->flags = EFX_RX_BUF_PAGE; ++rx_queue->added_count; -- cgit v1.2.3-70-g09d2 From c5b3ad4c67989c778e4753be4f91dc7193a04d21 Mon Sep 17 00:00:00 2001 From: Sathya Perla Date: Tue, 5 Mar 2013 22:23:20 +0000 Subject: be2net: use CSR-BAR SEMAPHORE reg for BE2/BE3 The SLIPORT_SEMAPHORE register shadowed in the config-space may not reflect the correct POST stage after an EEH reset in BE2/3; it may return FW_READY state even though FW is not ready. This causes the driver to prematurely poll the FW mailbox and fail. For BE2/3 use the CSR-BAR/0xac instead. Reported-by: Gavin Shan Signed-off-by: Sathya Perla Signed-off-by: David S. Miller --- drivers/net/ethernet/emulex/benet/be.h | 1 + drivers/net/ethernet/emulex/benet/be_cmds.c | 15 +++++++++------ drivers/net/ethernet/emulex/benet/be_hw.h | 4 ++-- drivers/net/ethernet/emulex/benet/be_main.c | 10 ++++++++++ 4 files changed, 22 insertions(+), 8 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/emulex/benet/be.h b/drivers/net/ethernet/emulex/benet/be.h index 28ceb841418..29aff55f2ee 100644 --- a/drivers/net/ethernet/emulex/benet/be.h +++ b/drivers/net/ethernet/emulex/benet/be.h @@ -349,6 +349,7 @@ struct be_adapter { struct pci_dev *pdev; struct net_device *netdev; + u8 __iomem *csr; /* CSR BAR used only for BE2/3 */ u8 __iomem *db; /* Door Bell */ struct mutex mbox_lock; /* For serializing mbox cmds to BE card */ diff --git a/drivers/net/ethernet/emulex/benet/be_cmds.c b/drivers/net/ethernet/emulex/benet/be_cmds.c index 813407f66c7..3c9b4f12e3e 100644 --- a/drivers/net/ethernet/emulex/benet/be_cmds.c +++ b/drivers/net/ethernet/emulex/benet/be_cmds.c @@ -473,14 +473,17 @@ static int be_mbox_notify_wait(struct be_adapter *adapter) return 0; } -static void be_POST_stage_get(struct be_adapter *adapter, u16 *stage) +static u16 be_POST_stage_get(struct be_adapter *adapter) { u32 sem; - u32 reg = skyhawk_chip(adapter) ? SLIPORT_SEMAPHORE_OFFSET_SH : - SLIPORT_SEMAPHORE_OFFSET_BE; - pci_read_config_dword(adapter->pdev, reg, &sem); - *stage = sem & POST_STAGE_MASK; + if (BEx_chip(adapter)) + sem = ioread32(adapter->csr + SLIPORT_SEMAPHORE_OFFSET_BEx); + else + pci_read_config_dword(adapter->pdev, + SLIPORT_SEMAPHORE_OFFSET_SH, &sem); + + return sem & POST_STAGE_MASK; } int lancer_wait_ready(struct be_adapter *adapter) @@ -574,7 +577,7 @@ int be_fw_wait_ready(struct be_adapter *adapter) } do { - be_POST_stage_get(adapter, &stage); + stage = be_POST_stage_get(adapter); if (stage == POST_STAGE_ARMFW_RDY) return 0; diff --git a/drivers/net/ethernet/emulex/benet/be_hw.h b/drivers/net/ethernet/emulex/benet/be_hw.h index 541d4530d5b..62dc220695f 100644 --- a/drivers/net/ethernet/emulex/benet/be_hw.h +++ b/drivers/net/ethernet/emulex/benet/be_hw.h @@ -32,8 +32,8 @@ #define MPU_EP_CONTROL 0 /********** MPU semphore: used for SH & BE *************/ -#define SLIPORT_SEMAPHORE_OFFSET_BE 0x7c -#define SLIPORT_SEMAPHORE_OFFSET_SH 0x94 +#define SLIPORT_SEMAPHORE_OFFSET_BEx 0xac /* CSR BAR offset */ +#define SLIPORT_SEMAPHORE_OFFSET_SH 0x94 /* PCI-CFG offset */ #define POST_STAGE_MASK 0x0000FFFF #define POST_ERR_MASK 0x1 #define POST_ERR_SHIFT 31 diff --git a/drivers/net/ethernet/emulex/benet/be_main.c b/drivers/net/ethernet/emulex/benet/be_main.c index 3860888ac71..08e54f3d288 100644 --- a/drivers/net/ethernet/emulex/benet/be_main.c +++ b/drivers/net/ethernet/emulex/benet/be_main.c @@ -3688,6 +3688,8 @@ static void be_netdev_init(struct net_device *netdev) static void be_unmap_pci_bars(struct be_adapter *adapter) { + if (adapter->csr) + pci_iounmap(adapter->pdev, adapter->csr); if (adapter->db) pci_iounmap(adapter->pdev, adapter->db); } @@ -3721,6 +3723,12 @@ static int be_map_pci_bars(struct be_adapter *adapter) adapter->if_type = (sli_intf & SLI_INTF_IF_TYPE_MASK) >> SLI_INTF_IF_TYPE_SHIFT; + if (BEx_chip(adapter) && be_physfn(adapter)) { + adapter->csr = pci_iomap(adapter->pdev, 2, 0); + if (adapter->csr == NULL) + return -ENOMEM; + } + addr = pci_iomap(adapter->pdev, db_bar(adapter), 0); if (addr == NULL) goto pci_map_err; @@ -4329,6 +4337,8 @@ static pci_ers_result_t be_eeh_reset(struct pci_dev *pdev) pci_restore_state(pdev); /* Check if card is ok and fw is ready */ + dev_info(&adapter->pdev->dev, + "Waiting for FW to be ready after EEH reset\n"); status = be_fw_wait_ready(adapter); if (status) return PCI_ERS_RESULT_DISCONNECT; -- cgit v1.2.3-70-g09d2 From f8af75f3517a24838a36eb5797a1a3e60bf9e276 Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Wed, 6 Mar 2013 11:02:37 +0000 Subject: tun: add a missing nf_reset() in tun_net_xmit() Dave reported following crash : general protection fault: 0000 [#1] SMP CPU 2 Pid: 25407, comm: qemu-kvm Not tainted 3.7.9-205.fc18.x86_64 #1 Hewlett-Packard HP Z400 Workstation/0B4Ch RIP: 0010:[] [] destroy_conntrack+0x35/0x120 [nf_conntrack] RSP: 0018:ffff880276913d78 EFLAGS: 00010206 RAX: 50626b6b7876376c RBX: ffff88026e530d68 RCX: ffff88028d158e00 RDX: ffff88026d0d5470 RSI: 0000000000000011 RDI: 0000000000000002 RBP: ffff880276913d88 R08: 0000000000000000 R09: ffff880295002900 R10: 0000000000000000 R11: 0000000000000003 R12: ffffffff81ca3b40 R13: ffffffff8151a8e0 R14: ffff880270875000 R15: 0000000000000002 FS: 00007ff3bce38a00(0000) GS:ffff88029fc40000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b CR2: 00007fd1430bd000 CR3: 000000027042b000 CR4: 00000000000027e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Process qemu-kvm (pid: 25407, threadinfo ffff880276912000, task ffff88028c369720) Stack: ffff880156f59100 ffff880156f59100 ffff880276913d98 ffffffff815534f7 ffff880276913db8 ffffffff8151a74b ffff880270875000 ffff880156f59100 ffff880276913dd8 ffffffff8151a5a6 ffff880276913dd8 ffff88026d0d5470 Call Trace: [] nf_conntrack_destroy+0x17/0x20 [] skb_release_head_state+0x7b/0x100 [] __kfree_skb+0x16/0xa0 [] kfree_skb+0x36/0xa0 [] skb_queue_purge+0x20/0x40 [] __tun_detach+0x117/0x140 [tun] [] tun_chr_close+0x3c/0xd0 [tun] [] __fput+0xec/0x240 [] ____fput+0xe/0x10 [] task_work_run+0xa7/0xe0 [] do_notify_resume+0x71/0xb0 [] int_signal+0x12/0x17 Code: 00 00 04 48 89 e5 41 54 53 48 89 fb 4c 8b a7 e8 00 00 00 0f 85 de 00 00 00 0f b6 73 3e 0f b7 7b 2a e8 10 40 00 00 48 85 c0 74 0e <48> 8b 40 28 48 85 c0 74 05 48 89 df ff d0 48 c7 c7 08 6a 3a a0 RIP [] destroy_conntrack+0x35/0x120 [nf_conntrack] RSP This is because tun_net_xmit() needs to call nf_reset() before queuing skb into receive_queue Reported-by: Dave Jones Signed-off-by: Eric Dumazet Signed-off-by: David S. Miller --- drivers/net/tun.c | 2 ++ 1 file changed, 2 insertions(+) (limited to 'drivers/net') diff --git a/drivers/net/tun.c b/drivers/net/tun.c index 2c6a22e278e..b7c457adc0d 100644 --- a/drivers/net/tun.c +++ b/drivers/net/tun.c @@ -747,6 +747,8 @@ static netdev_tx_t tun_net_xmit(struct sk_buff *skb, struct net_device *dev) goto drop; skb_orphan(skb); + nf_reset(skb); + /* Enqueue packet */ skb_queue_tail(&tfile->socket.sk->sk_receive_queue, skb); -- cgit v1.2.3-70-g09d2 From 4e0855dff094b0d56d6b5b271e0ce7851cc1e063 Mon Sep 17 00:00:00 2001 From: Konstantin Khlebnikov Date: Tue, 5 Mar 2013 09:42:59 +0000 Subject: e1000e: fix pci-device enable-counter balance This patch removes redundant and unbalanced pci_disable_device() from __e1000_shutdown(). pci_clear_master() is enough, device can go into suspended state with elevated enable_cnt. Bug was introduced in commit 23606cf5d1192c2b17912cb2ef6e62f9b11de133 ("e1000e / PCI / PM: Add basic runtime PM support (rev. 4)") in v2.6.35 Cc: Bruce Allan CC: Stable Signed-off-by: Konstantin Khlebnikov Acked-by: Rafael J. Wysocki Tested-by: Borislav Petkov Tested-by: Aaron Brown Signed-off-by: Jeff Kirsher --- drivers/net/ethernet/intel/e1000e/netdev.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/intel/e1000e/netdev.c b/drivers/net/ethernet/intel/e1000e/netdev.c index a177b8b65c4..1799021944e 100644 --- a/drivers/net/ethernet/intel/e1000e/netdev.c +++ b/drivers/net/ethernet/intel/e1000e/netdev.c @@ -5986,7 +5986,7 @@ static int __e1000_shutdown(struct pci_dev *pdev, bool *enable_wake, */ e1000e_release_hw_control(adapter); - pci_disable_device(pdev); + pci_clear_master(pdev); return 0; } -- cgit v1.2.3-70-g09d2 From 66148babe728f3e00e13c56f6b0ecf325abd80da Mon Sep 17 00:00:00 2001 From: Konstantin Khlebnikov Date: Tue, 5 Mar 2013 09:43:04 +0000 Subject: e1000e: fix runtime power management transitions This patch removes redundant actions from driver and fixes its interaction with actions in pci-bus runtime power management code. It removes pci_save_state() from __e1000_shutdown() for normal adapters, PCI bus callbacks pci_pm_*() will do all this for us. Now __e1000_shutdown() switches to D3-state only quad-port adapters, because they needs quirk for clearing false-positive error from downsteam pci-e port. pci_save_state() now called after clearing bus-master bit, thus __e1000_resume() and e1000_io_slot_reset() must set it back after restoring configuration space. This patch set get_link_status before calling pm_runtime_put() in e1000_open() to allow e1000_idle() get real link status and schedule first runtime suspend. This patch also enables wakeup for device if management mode is enabled (like for WoL) as result pci_prepare_to_sleep() would setup wakeup without special actions like custom 'enable_wakeup' sign. Cc: Bruce Allan Signed-off-by: Konstantin Khlebnikov Acked-by: Rafael J. Wysocki Tested-by: Borislav Petkov Tested-by: Aaron Brown Signed-off-by: Jeff Kirsher --- drivers/net/ethernet/intel/e1000e/netdev.c | 78 +++++++----------------------- 1 file changed, 18 insertions(+), 60 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/intel/e1000e/netdev.c b/drivers/net/ethernet/intel/e1000e/netdev.c index 1799021944e..2954cc7352e 100644 --- a/drivers/net/ethernet/intel/e1000e/netdev.c +++ b/drivers/net/ethernet/intel/e1000e/netdev.c @@ -4303,6 +4303,7 @@ static int e1000_open(struct net_device *netdev) netif_start_queue(netdev); adapter->idle_check = true; + hw->mac.get_link_status = true; pm_runtime_put(&pdev->dev); /* fire a link status change interrupt to start the watchdog */ @@ -5887,8 +5888,7 @@ release: return retval; } -static int __e1000_shutdown(struct pci_dev *pdev, bool *enable_wake, - bool runtime) +static int __e1000_shutdown(struct pci_dev *pdev, bool runtime) { struct net_device *netdev = pci_get_drvdata(pdev); struct e1000_adapter *adapter = netdev_priv(netdev); @@ -5912,10 +5912,6 @@ static int __e1000_shutdown(struct pci_dev *pdev, bool *enable_wake, } e1000e_reset_interrupt_capability(adapter); - retval = pci_save_state(pdev); - if (retval) - return retval; - status = er32(STATUS); if (status & E1000_STATUS_LU) wufc &= ~E1000_WUFC_LNKC; @@ -5971,13 +5967,6 @@ static int __e1000_shutdown(struct pci_dev *pdev, bool *enable_wake, ew32(WUFC, 0); } - *enable_wake = !!wufc; - - /* make sure adapter isn't asleep if manageability is enabled */ - if ((adapter->flags & FLAG_MNG_PT_ENABLED) || - (hw->mac.ops.check_mng_mode(hw))) - *enable_wake = true; - if (adapter->hw.phy.type == e1000_phy_igp_3) e1000e_igp3_phy_powerdown_workaround_ich8lan(&adapter->hw); @@ -5988,26 +5977,6 @@ static int __e1000_shutdown(struct pci_dev *pdev, bool *enable_wake, pci_clear_master(pdev); - return 0; -} - -static void e1000_power_off(struct pci_dev *pdev, bool sleep, bool wake) -{ - if (sleep && wake) { - pci_prepare_to_sleep(pdev); - return; - } - - pci_wake_from_d3(pdev, wake); - pci_set_power_state(pdev, PCI_D3hot); -} - -static void e1000_complete_shutdown(struct pci_dev *pdev, bool sleep, - bool wake) -{ - struct net_device *netdev = pci_get_drvdata(pdev); - struct e1000_adapter *adapter = netdev_priv(netdev); - /* The pci-e switch on some quad port adapters will report a * correctable error when the MAC transitions from D0 to D3. To * prevent this we need to mask off the correctable errors on the @@ -6021,12 +5990,13 @@ static void e1000_complete_shutdown(struct pci_dev *pdev, bool sleep, pcie_capability_write_word(us_dev, PCI_EXP_DEVCTL, (devctl & ~PCI_EXP_DEVCTL_CERE)); - e1000_power_off(pdev, sleep, wake); + pci_save_state(pdev); + pci_prepare_to_sleep(pdev); pcie_capability_write_word(us_dev, PCI_EXP_DEVCTL, devctl); - } else { - e1000_power_off(pdev, sleep, wake); } + + return 0; } #ifdef CONFIG_PCIEASPM @@ -6084,9 +6054,7 @@ static int __e1000_resume(struct pci_dev *pdev) if (aspm_disable_flag) e1000e_disable_aspm(pdev, aspm_disable_flag); - pci_set_power_state(pdev, PCI_D0); - pci_restore_state(pdev); - pci_save_state(pdev); + pci_set_master(pdev); e1000e_set_interrupt_capability(adapter); if (netif_running(netdev)) { @@ -6152,14 +6120,8 @@ static int __e1000_resume(struct pci_dev *pdev) static int e1000_suspend(struct device *dev) { struct pci_dev *pdev = to_pci_dev(dev); - int retval; - bool wake; - - retval = __e1000_shutdown(pdev, &wake, false); - if (!retval) - e1000_complete_shutdown(pdev, true, wake); - return retval; + return __e1000_shutdown(pdev, false); } static int e1000_resume(struct device *dev) @@ -6182,13 +6144,10 @@ static int e1000_runtime_suspend(struct device *dev) struct net_device *netdev = pci_get_drvdata(pdev); struct e1000_adapter *adapter = netdev_priv(netdev); - if (e1000e_pm_ready(adapter)) { - bool wake; - - __e1000_shutdown(pdev, &wake, true); - } + if (!e1000e_pm_ready(adapter)) + return 0; - return 0; + return __e1000_shutdown(pdev, true); } static int e1000_idle(struct device *dev) @@ -6226,12 +6185,7 @@ static int e1000_runtime_resume(struct device *dev) static void e1000_shutdown(struct pci_dev *pdev) { - bool wake = false; - - __e1000_shutdown(pdev, &wake, false); - - if (system_state == SYSTEM_POWER_OFF) - e1000_complete_shutdown(pdev, false, wake); + __e1000_shutdown(pdev, false); } #ifdef CONFIG_NET_POLL_CONTROLLER @@ -6352,9 +6306,9 @@ static pci_ers_result_t e1000_io_slot_reset(struct pci_dev *pdev) "Cannot re-enable PCI device after reset.\n"); result = PCI_ERS_RESULT_DISCONNECT; } else { - pci_set_master(pdev); pdev->state_saved = true; pci_restore_state(pdev); + pci_set_master(pdev); pci_enable_wake(pdev, PCI_D3hot, 0); pci_enable_wake(pdev, PCI_D3cold, 0); @@ -6783,7 +6737,11 @@ static int e1000_probe(struct pci_dev *pdev, const struct pci_device_id *ent) /* initialize the wol settings based on the eeprom settings */ adapter->wol = adapter->eeprom_wol; - device_set_wakeup_enable(&adapter->pdev->dev, adapter->wol); + + /* make sure adapter isn't asleep if manageability is enabled */ + if (adapter->wol || (adapter->flags & FLAG_MNG_PT_ENABLED) || + (hw->mac.ops.check_mng_mode(hw))) + device_wakeup_enable(&pdev->dev); /* save off EEPROM version number */ e1000_read_nvm(&adapter->hw, 5, 1, &adapter->eeprom_vers); -- cgit v1.2.3-70-g09d2 From e60b22c5b7e59db09a7c9490b1e132c7e49ae904 Mon Sep 17 00:00:00 2001 From: Konstantin Khlebnikov Date: Tue, 5 Mar 2013 09:43:09 +0000 Subject: e1000e: fix accessing to suspended device This patch fixes some annoying messages like 'Error reading PHY register' and 'Hardware Erorr' and saves several seconds on reboot. Cc: Bruce Allan Signed-off-by: Konstantin Khlebnikov Acked-by: Rafael J. Wysocki Tested-by: Borislav Petkov Tested-by: Aaron Brown Signed-off-by: Jeff Kirsher --- drivers/net/ethernet/intel/e1000e/ethtool.c | 13 +++++++++++++ drivers/net/ethernet/intel/e1000e/netdev.c | 2 ++ 2 files changed, 15 insertions(+) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/intel/e1000e/ethtool.c b/drivers/net/ethernet/intel/e1000e/ethtool.c index 2c1813737f6..f91a8f3f9d4 100644 --- a/drivers/net/ethernet/intel/e1000e/ethtool.c +++ b/drivers/net/ethernet/intel/e1000e/ethtool.c @@ -36,6 +36,7 @@ #include #include #include +#include #include "e1000.h" @@ -2229,7 +2230,19 @@ static int e1000e_get_ts_info(struct net_device *netdev, return 0; } +static int e1000e_ethtool_begin(struct net_device *netdev) +{ + return pm_runtime_get_sync(netdev->dev.parent); +} + +static void e1000e_ethtool_complete(struct net_device *netdev) +{ + pm_runtime_put_sync(netdev->dev.parent); +} + static const struct ethtool_ops e1000_ethtool_ops = { + .begin = e1000e_ethtool_begin, + .complete = e1000e_ethtool_complete, .get_settings = e1000_get_settings, .set_settings = e1000_set_settings, .get_drvinfo = e1000_get_drvinfo, diff --git a/drivers/net/ethernet/intel/e1000e/netdev.c b/drivers/net/ethernet/intel/e1000e/netdev.c index 2954cc7352e..948b86ffa4f 100644 --- a/drivers/net/ethernet/intel/e1000e/netdev.c +++ b/drivers/net/ethernet/intel/e1000e/netdev.c @@ -4663,6 +4663,7 @@ static void e1000_phy_read_status(struct e1000_adapter *adapter) (adapter->hw.phy.media_type == e1000_media_type_copper)) { int ret_val; + pm_runtime_get_sync(&adapter->pdev->dev); ret_val = e1e_rphy(hw, MII_BMCR, &phy->bmcr); ret_val |= e1e_rphy(hw, MII_BMSR, &phy->bmsr); ret_val |= e1e_rphy(hw, MII_ADVERTISE, &phy->advertise); @@ -4673,6 +4674,7 @@ static void e1000_phy_read_status(struct e1000_adapter *adapter) ret_val |= e1e_rphy(hw, MII_ESTATUS, &phy->estatus); if (ret_val) e_warn("Error reading PHY register\n"); + pm_runtime_put_sync(&adapter->pdev->dev); } else { /* Do not read PHY registers if link is not up * Set values to typical power-on defaults -- cgit v1.2.3-70-g09d2 From 3fb817f1cd54bedd23e8913051473d574a0f1717 Mon Sep 17 00:00:00 2001 From: Jack Morgenstein Date: Thu, 7 Mar 2013 03:46:52 +0000 Subject: net/mlx4_core: Disable mlx4_QP_ATTACH calls from guests if the host uses flow steering Guests kernels may not correctly detect if DMFS (device-enabled flow steering) is activated by the host. If DMFS is activated, the master should return error to guests which try to use the B0-steering flow calls (mlx4_QP_ATTACH). Signed-off-by: Jack Morgenstein Signed-off-by: Or Gerlitz Signed-off-by: David S. Miller --- drivers/net/ethernet/mellanox/mlx4/resource_tracker.c | 3 +++ 1 file changed, 3 insertions(+) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/mellanox/mlx4/resource_tracker.c b/drivers/net/ethernet/mellanox/mlx4/resource_tracker.c index 083fb48dc3d..2995687f1ae 100644 --- a/drivers/net/ethernet/mellanox/mlx4/resource_tracker.c +++ b/drivers/net/ethernet/mellanox/mlx4/resource_tracker.c @@ -2990,6 +2990,9 @@ int mlx4_QP_ATTACH_wrapper(struct mlx4_dev *dev, int slave, u8 steer_type_mask = 2; enum mlx4_steer_type type = (gid[7] & steer_type_mask) >> 1; + if (dev->caps.steering_mode != MLX4_STEERING_MODE_B0) + return -EINVAL; + qpn = vhcr->in_modifier & 0xffffff; err = get_res(dev, slave, qpn, RES_QP, &rqp); if (err) -- cgit v1.2.3-70-g09d2 From 0081c8f3814a8344ca975c085d987ec6c90499ae Mon Sep 17 00:00:00 2001 From: Jack Morgenstein Date: Thu, 7 Mar 2013 03:46:53 +0000 Subject: net/mlx4_core: Turn off device-managed FS bit in dev-cap wrapper if DMFS is not enabled Older kernels detect DMFS (device-managed flow steering) from the HCA device capability directly, regardless of whether the capability was enabled in INIT_HCA, this is fixed by commit 7b8157bed "mlx4_core: Adjustments to Flow Steering activation logic for SR-IOV" To protect against guests running kernels without this fix, the host driver should turn off the DMFS capability bit in mlx4_QUERY_DEV_CAP_wrapper. Signed-off-by: Jack Morgenstein Signed-off-by: Or Gerlitz Signed-off-by: David S. Miller --- drivers/net/ethernet/mellanox/mlx4/fw.c | 8 ++++++++ 1 file changed, 8 insertions(+) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/mellanox/mlx4/fw.c b/drivers/net/ethernet/mellanox/mlx4/fw.c index 50917eb3013..f6245579962 100644 --- a/drivers/net/ethernet/mellanox/mlx4/fw.c +++ b/drivers/net/ethernet/mellanox/mlx4/fw.c @@ -787,6 +787,14 @@ int mlx4_QUERY_DEV_CAP_wrapper(struct mlx4_dev *dev, int slave, bmme_flags &= ~MLX4_BMME_FLAG_TYPE_2_WIN; MLX4_PUT(outbox->buf, bmme_flags, QUERY_DEV_CAP_BMME_FLAGS_OFFSET); + /* turn off device-managed steering capability if not enabled */ + if (dev->caps.steering_mode != MLX4_STEERING_MODE_DEVICE_MANAGED) { + MLX4_GET(field, outbox->buf, + QUERY_DEV_CAP_FLOW_STEERING_RANGE_EN_OFFSET); + field &= 0x7f; + MLX4_PUT(outbox->buf, field, + QUERY_DEV_CAP_FLOW_STEERING_RANGE_EN_OFFSET); + } return 0; } -- cgit v1.2.3-70-g09d2 From e7dbeba85600aa2c8daf99f8f53d9ad27e88b810 Mon Sep 17 00:00:00 2001 From: Jack Morgenstein Date: Thu, 7 Mar 2013 03:46:54 +0000 Subject: net/mlx4_core: Fix endianness bug in set_param_l The set_param_l function assumes casting a u64 pointer to a u32 pointer allows to access the lower 32bits, but it results in writing the upper 32 bits on big endian systems. The fixed function reads the upper 32 bits of the 64 argument, and or's them with the 32 bits of the 32-bit value passed to the function. Since this is now a "read-modify-write" operation, we got many "unintialized variable" warnings which needed to be fixed as well. Reported-by: Alexander Schmidt . Signed-off-by: Jack Morgenstein Signed-off-by: Or Gerlitz Signed-off-by: David S. Miller --- drivers/net/ethernet/mellanox/mlx4/cq.c | 2 +- drivers/net/ethernet/mellanox/mlx4/main.c | 2 +- drivers/net/ethernet/mellanox/mlx4/mlx4.h | 2 +- drivers/net/ethernet/mellanox/mlx4/mr.c | 10 +++++----- drivers/net/ethernet/mellanox/mlx4/pd.c | 2 +- drivers/net/ethernet/mellanox/mlx4/port.c | 8 ++++---- drivers/net/ethernet/mellanox/mlx4/qp.c | 8 ++++---- drivers/net/ethernet/mellanox/mlx4/srq.c | 2 +- 8 files changed, 18 insertions(+), 18 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/mellanox/mlx4/cq.c b/drivers/net/ethernet/mellanox/mlx4/cq.c index 7e64033d7de..0706623cfb9 100644 --- a/drivers/net/ethernet/mellanox/mlx4/cq.c +++ b/drivers/net/ethernet/mellanox/mlx4/cq.c @@ -226,7 +226,7 @@ void __mlx4_cq_free_icm(struct mlx4_dev *dev, int cqn) static void mlx4_cq_free_icm(struct mlx4_dev *dev, int cqn) { - u64 in_param; + u64 in_param = 0; int err; if (mlx4_is_mfunc(dev)) { diff --git a/drivers/net/ethernet/mellanox/mlx4/main.c b/drivers/net/ethernet/mellanox/mlx4/main.c index d180bc46826..16abde20e1f 100644 --- a/drivers/net/ethernet/mellanox/mlx4/main.c +++ b/drivers/net/ethernet/mellanox/mlx4/main.c @@ -1555,7 +1555,7 @@ void __mlx4_counter_free(struct mlx4_dev *dev, u32 idx) void mlx4_counter_free(struct mlx4_dev *dev, u32 idx) { - u64 in_param; + u64 in_param = 0; if (mlx4_is_mfunc(dev)) { set_param_l(&in_param, idx); diff --git a/drivers/net/ethernet/mellanox/mlx4/mlx4.h b/drivers/net/ethernet/mellanox/mlx4/mlx4.h index cf883345af8..d738454116a 100644 --- a/drivers/net/ethernet/mellanox/mlx4/mlx4.h +++ b/drivers/net/ethernet/mellanox/mlx4/mlx4.h @@ -1235,7 +1235,7 @@ int mlx4_get_qp_per_mgm(struct mlx4_dev *dev); static inline void set_param_l(u64 *arg, u32 val) { - *((u32 *)arg) = val; + *arg = (*arg & 0xffffffff00000000ULL) | (u64) val; } static inline void set_param_h(u64 *arg, u32 val) diff --git a/drivers/net/ethernet/mellanox/mlx4/mr.c b/drivers/net/ethernet/mellanox/mlx4/mr.c index 602ca9bf78e..f91719a08cb 100644 --- a/drivers/net/ethernet/mellanox/mlx4/mr.c +++ b/drivers/net/ethernet/mellanox/mlx4/mr.c @@ -183,7 +183,7 @@ u32 __mlx4_alloc_mtt_range(struct mlx4_dev *dev, int order) static u32 mlx4_alloc_mtt_range(struct mlx4_dev *dev, int order) { - u64 in_param; + u64 in_param = 0; u64 out_param; int err; @@ -240,7 +240,7 @@ void __mlx4_free_mtt_range(struct mlx4_dev *dev, u32 offset, int order) static void mlx4_free_mtt_range(struct mlx4_dev *dev, u32 offset, int order) { - u64 in_param; + u64 in_param = 0; int err; if (mlx4_is_mfunc(dev)) { @@ -351,7 +351,7 @@ void __mlx4_mpt_release(struct mlx4_dev *dev, u32 index) static void mlx4_mpt_release(struct mlx4_dev *dev, u32 index) { - u64 in_param; + u64 in_param = 0; if (mlx4_is_mfunc(dev)) { set_param_l(&in_param, index); @@ -374,7 +374,7 @@ int __mlx4_mpt_alloc_icm(struct mlx4_dev *dev, u32 index) static int mlx4_mpt_alloc_icm(struct mlx4_dev *dev, u32 index) { - u64 param; + u64 param = 0; if (mlx4_is_mfunc(dev)) { set_param_l(¶m, index); @@ -395,7 +395,7 @@ void __mlx4_mpt_free_icm(struct mlx4_dev *dev, u32 index) static void mlx4_mpt_free_icm(struct mlx4_dev *dev, u32 index) { - u64 in_param; + u64 in_param = 0; if (mlx4_is_mfunc(dev)) { set_param_l(&in_param, index); diff --git a/drivers/net/ethernet/mellanox/mlx4/pd.c b/drivers/net/ethernet/mellanox/mlx4/pd.c index 1ac88637ad9..00f223acada 100644 --- a/drivers/net/ethernet/mellanox/mlx4/pd.c +++ b/drivers/net/ethernet/mellanox/mlx4/pd.c @@ -101,7 +101,7 @@ void __mlx4_xrcd_free(struct mlx4_dev *dev, u32 xrcdn) void mlx4_xrcd_free(struct mlx4_dev *dev, u32 xrcdn) { - u64 in_param; + u64 in_param = 0; int err; if (mlx4_is_mfunc(dev)) { diff --git a/drivers/net/ethernet/mellanox/mlx4/port.c b/drivers/net/ethernet/mellanox/mlx4/port.c index 719ead15e49..10c57c86388 100644 --- a/drivers/net/ethernet/mellanox/mlx4/port.c +++ b/drivers/net/ethernet/mellanox/mlx4/port.c @@ -175,7 +175,7 @@ EXPORT_SYMBOL_GPL(__mlx4_register_mac); int mlx4_register_mac(struct mlx4_dev *dev, u8 port, u64 mac) { - u64 out_param; + u64 out_param = 0; int err; if (mlx4_is_mfunc(dev)) { @@ -222,7 +222,7 @@ EXPORT_SYMBOL_GPL(__mlx4_unregister_mac); void mlx4_unregister_mac(struct mlx4_dev *dev, u8 port, u64 mac) { - u64 out_param; + u64 out_param = 0; if (mlx4_is_mfunc(dev)) { set_param_l(&out_param, port); @@ -361,7 +361,7 @@ out: int mlx4_register_vlan(struct mlx4_dev *dev, u8 port, u16 vlan, int *index) { - u64 out_param; + u64 out_param = 0; int err; if (mlx4_is_mfunc(dev)) { @@ -406,7 +406,7 @@ out: void mlx4_unregister_vlan(struct mlx4_dev *dev, u8 port, int index) { - u64 in_param; + u64 in_param = 0; int err; if (mlx4_is_mfunc(dev)) { diff --git a/drivers/net/ethernet/mellanox/mlx4/qp.c b/drivers/net/ethernet/mellanox/mlx4/qp.c index 81e2abe07bb..e891b058c1b 100644 --- a/drivers/net/ethernet/mellanox/mlx4/qp.c +++ b/drivers/net/ethernet/mellanox/mlx4/qp.c @@ -222,7 +222,7 @@ int __mlx4_qp_reserve_range(struct mlx4_dev *dev, int cnt, int align, int mlx4_qp_reserve_range(struct mlx4_dev *dev, int cnt, int align, int *base) { - u64 in_param; + u64 in_param = 0; u64 out_param; int err; @@ -255,7 +255,7 @@ void __mlx4_qp_release_range(struct mlx4_dev *dev, int base_qpn, int cnt) void mlx4_qp_release_range(struct mlx4_dev *dev, int base_qpn, int cnt) { - u64 in_param; + u64 in_param = 0; int err; if (mlx4_is_mfunc(dev)) { @@ -319,7 +319,7 @@ err_out: static int mlx4_qp_alloc_icm(struct mlx4_dev *dev, int qpn) { - u64 param; + u64 param = 0; if (mlx4_is_mfunc(dev)) { set_param_l(¶m, qpn); @@ -344,7 +344,7 @@ void __mlx4_qp_free_icm(struct mlx4_dev *dev, int qpn) static void mlx4_qp_free_icm(struct mlx4_dev *dev, int qpn) { - u64 in_param; + u64 in_param = 0; if (mlx4_is_mfunc(dev)) { set_param_l(&in_param, qpn); diff --git a/drivers/net/ethernet/mellanox/mlx4/srq.c b/drivers/net/ethernet/mellanox/mlx4/srq.c index feda6c00829..e329fe1f11b 100644 --- a/drivers/net/ethernet/mellanox/mlx4/srq.c +++ b/drivers/net/ethernet/mellanox/mlx4/srq.c @@ -149,7 +149,7 @@ void __mlx4_srq_free_icm(struct mlx4_dev *dev, int srqn) static void mlx4_srq_free_icm(struct mlx4_dev *dev, int srqn) { - u64 in_param; + u64 in_param = 0; if (mlx4_is_mfunc(dev)) { set_param_l(&in_param, srqn); -- cgit v1.2.3-70-g09d2 From bfa8ab47415a87c6c93a9e54e16f2f8cc6de79af Mon Sep 17 00:00:00 2001 From: Yan Burman Date: Thu, 7 Mar 2013 03:46:55 +0000 Subject: net/mlx4_en: Fix race when setting the device MAC address Remove unnecessary use of workqueue for the device MAC address setting flow, and fix a race when setting MAC address which was introduced by commit c07cb4b0a "net/mlx4_en: Manage hash of MAC addresses per port" The race happened when mlx4_en_replace_mac was being executed in parallel with a successive call to ndo_set_mac_address, e.g witn an A/B/A MAC setting configuration test, the third set fails. With this change we also properly report an error if set MAC fails. Signed-off-by: Yan Burman Signed-off-by: Or Gerlitz Signed-off-by: David S. Miller --- drivers/net/ethernet/mellanox/mlx4/en_netdev.c | 42 +++++++++++++------------- drivers/net/ethernet/mellanox/mlx4/mlx4_en.h | 1 - 2 files changed, 21 insertions(+), 22 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/mellanox/mlx4/en_netdev.c b/drivers/net/ethernet/mellanox/mlx4/en_netdev.c index bb4d8d99f36..217e618fd71 100644 --- a/drivers/net/ethernet/mellanox/mlx4/en_netdev.c +++ b/drivers/net/ethernet/mellanox/mlx4/en_netdev.c @@ -650,28 +650,10 @@ u64 mlx4_en_mac_to_u64(u8 *addr) return mac; } -static int mlx4_en_set_mac(struct net_device *dev, void *addr) +static int mlx4_en_do_set_mac(struct mlx4_en_priv *priv) { - struct mlx4_en_priv *priv = netdev_priv(dev); - struct mlx4_en_dev *mdev = priv->mdev; - struct sockaddr *saddr = addr; - - if (!is_valid_ether_addr(saddr->sa_data)) - return -EADDRNOTAVAIL; - - memcpy(dev->dev_addr, saddr->sa_data, ETH_ALEN); - queue_work(mdev->workqueue, &priv->mac_task); - return 0; -} - -static void mlx4_en_do_set_mac(struct work_struct *work) -{ - struct mlx4_en_priv *priv = container_of(work, struct mlx4_en_priv, - mac_task); - struct mlx4_en_dev *mdev = priv->mdev; int err = 0; - mutex_lock(&mdev->state_lock); if (priv->port_up) { /* Remove old MAC and insert the new one */ err = mlx4_en_replace_mac(priv, priv->base_qpn, @@ -683,7 +665,26 @@ static void mlx4_en_do_set_mac(struct work_struct *work) } else en_dbg(HW, priv, "Port is down while registering mac, exiting...\n"); + return err; +} + +static int mlx4_en_set_mac(struct net_device *dev, void *addr) +{ + struct mlx4_en_priv *priv = netdev_priv(dev); + struct mlx4_en_dev *mdev = priv->mdev; + struct sockaddr *saddr = addr; + int err; + + if (!is_valid_ether_addr(saddr->sa_data)) + return -EADDRNOTAVAIL; + + memcpy(dev->dev_addr, saddr->sa_data, ETH_ALEN); + + mutex_lock(&mdev->state_lock); + err = mlx4_en_do_set_mac(priv); mutex_unlock(&mdev->state_lock); + + return err; } static void mlx4_en_clear_list(struct net_device *dev) @@ -1348,7 +1349,7 @@ static void mlx4_en_do_get_stats(struct work_struct *work) queue_delayed_work(mdev->workqueue, &priv->stats_task, STATS_DELAY); } if (mdev->mac_removed[MLX4_MAX_PORTS + 1 - priv->port]) { - queue_work(mdev->workqueue, &priv->mac_task); + mlx4_en_do_set_mac(priv); mdev->mac_removed[MLX4_MAX_PORTS + 1 - priv->port] = 0; } mutex_unlock(&mdev->state_lock); @@ -2078,7 +2079,6 @@ int mlx4_en_init_netdev(struct mlx4_en_dev *mdev, int port, priv->msg_enable = MLX4_EN_MSG_LEVEL; spin_lock_init(&priv->stats_lock); INIT_WORK(&priv->rx_mode_task, mlx4_en_do_set_rx_mode); - INIT_WORK(&priv->mac_task, mlx4_en_do_set_mac); INIT_WORK(&priv->watchdog_task, mlx4_en_restart); INIT_WORK(&priv->linkstate_task, mlx4_en_linkstate); INIT_DELAYED_WORK(&priv->stats_task, mlx4_en_do_get_stats); diff --git a/drivers/net/ethernet/mellanox/mlx4/mlx4_en.h b/drivers/net/ethernet/mellanox/mlx4/mlx4_en.h index c313d7e943a..f710b7ce0dc 100644 --- a/drivers/net/ethernet/mellanox/mlx4/mlx4_en.h +++ b/drivers/net/ethernet/mellanox/mlx4/mlx4_en.h @@ -509,7 +509,6 @@ struct mlx4_en_priv { struct mlx4_en_cq rx_cq[MAX_RX_RINGS]; struct mlx4_qp drop_qp; struct work_struct rx_mode_task; - struct work_struct mac_task; struct work_struct watchdog_task; struct work_struct linkstate_task; struct delayed_work stats_task; -- cgit v1.2.3-70-g09d2 From 83a5a6cef40616d19a388f560447e99c2ca04d1e Mon Sep 17 00:00:00 2001 From: Yan Burman Date: Thu, 7 Mar 2013 03:46:56 +0000 Subject: net/mlx4_en: Cleanup MAC resources on module unload or port stop Make sure we cleanup all MAC related resources (entries in the port MAC table and steering rules) when stopping a port or when the driver is unloaded. The leak was introduced by commit 07cb4b0a "net/mlx4_en: Manage hash of MAC addresses per port". Signed-off-by: Yan Burman Signed-off-by: Or Gerlitz Signed-off-by: David S. Miller --- drivers/net/ethernet/mellanox/mlx4/en_netdev.c | 36 ++++++++++++++------------ 1 file changed, 20 insertions(+), 16 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/mellanox/mlx4/en_netdev.c b/drivers/net/ethernet/mellanox/mlx4/en_netdev.c index 217e618fd71..7fd0936967c 100644 --- a/drivers/net/ethernet/mellanox/mlx4/en_netdev.c +++ b/drivers/net/ethernet/mellanox/mlx4/en_netdev.c @@ -565,34 +565,38 @@ static void mlx4_en_put_qp(struct mlx4_en_priv *priv) struct mlx4_en_dev *mdev = priv->mdev; struct mlx4_dev *dev = mdev->dev; int qpn = priv->base_qpn; - u64 mac = mlx4_en_mac_to_u64(priv->dev->dev_addr); - - en_dbg(DRV, priv, "Registering MAC: %pM for deleting\n", - priv->dev->dev_addr); - mlx4_unregister_mac(dev, priv->port, mac); + u64 mac; - if (dev->caps.steering_mode != MLX4_STEERING_MODE_A0) { + if (dev->caps.steering_mode == MLX4_STEERING_MODE_A0) { + mac = mlx4_en_mac_to_u64(priv->dev->dev_addr); + en_dbg(DRV, priv, "Registering MAC: %pM for deleting\n", + priv->dev->dev_addr); + mlx4_unregister_mac(dev, priv->port, mac); + } else { struct mlx4_mac_entry *entry; struct hlist_node *tmp; struct hlist_head *bucket; - unsigned int mac_hash; + unsigned int i; - mac_hash = priv->dev->dev_addr[MLX4_EN_MAC_HASH_IDX]; - bucket = &priv->mac_hash[mac_hash]; - hlist_for_each_entry_safe(entry, tmp, bucket, hlist) { - if (ether_addr_equal_64bits(entry->mac, - priv->dev->dev_addr)) { - en_dbg(DRV, priv, "Releasing qp: port %d, MAC %pM, qpn %d\n", - priv->port, priv->dev->dev_addr, qpn); + for (i = 0; i < MLX4_EN_MAC_HASH_SIZE; ++i) { + bucket = &priv->mac_hash[i]; + hlist_for_each_entry_safe(entry, tmp, bucket, hlist) { + mac = mlx4_en_mac_to_u64(entry->mac); + en_dbg(DRV, priv, "Registering MAC: %pM for deleting\n", + entry->mac); mlx4_en_uc_steer_release(priv, entry->mac, qpn, entry->reg_id); - mlx4_qp_release_range(dev, qpn, 1); + mlx4_unregister_mac(dev, priv->port, mac); hlist_del_rcu(&entry->hlist); kfree_rcu(entry, rcu); - break; } } + + en_dbg(DRV, priv, "Releasing qp: port %d, qpn %d\n", + priv->port, qpn); + mlx4_qp_release_range(dev, qpn, 1); + priv->flags &= ~MLX4_EN_FLAG_FORCE_PROMISC; } } -- cgit v1.2.3-70-g09d2 From a229e488ac3f904d06c20d8d3f47831db3c7a15a Mon Sep 17 00:00:00 2001 From: Amir Vadai Date: Thu, 7 Mar 2013 03:46:57 +0000 Subject: net/mlx4_en: Disable RFS when running in SRIOV mode Commit 37706996 "mlx4_en: fix allocation of CPU affinity reverse-map" fixed a bug when mlx4_dev->caps.comp_pool is larger from the device rx rings, but introduced a regression. When the mlx4_core is activating its "legacy mode" (e.g when running in SRIOV mode) w.r.t to EQs/IRQs usage, comp_pool becomes zero and we're crashing on divide by zero alloc_cpu_rmap. Fix that by enabling RFS only when running in non-legacy mode. Reported-by: Yan Burman Cc: Kleber Sacilotto de Souza Signed-off-by: Amir Vadai Signed-off-by: Or Gerlitz Signed-off-by: David S. Miller --- drivers/net/ethernet/mellanox/mlx4/en_netdev.c | 8 +++++--- 1 file changed, 5 insertions(+), 3 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/mellanox/mlx4/en_netdev.c b/drivers/net/ethernet/mellanox/mlx4/en_netdev.c index 7fd0936967c..995d4b6d5c1 100644 --- a/drivers/net/ethernet/mellanox/mlx4/en_netdev.c +++ b/drivers/net/ethernet/mellanox/mlx4/en_netdev.c @@ -1833,9 +1833,11 @@ int mlx4_en_alloc_resources(struct mlx4_en_priv *priv) } #ifdef CONFIG_RFS_ACCEL - priv->dev->rx_cpu_rmap = alloc_irq_cpu_rmap(priv->mdev->dev->caps.comp_pool); - if (!priv->dev->rx_cpu_rmap) - goto err; + if (priv->mdev->dev->caps.comp_pool) { + priv->dev->rx_cpu_rmap = alloc_irq_cpu_rmap(priv->mdev->dev->caps.comp_pool); + if (!priv->dev->rx_cpu_rmap) + goto err; + } #endif return 0; -- cgit v1.2.3-70-g09d2 From e4fabf2b6e6d75752d5eede57f23ff8e9c6aa09b Mon Sep 17 00:00:00 2001 From: Bhavesh Davda Date: Wed, 6 Mar 2013 12:04:53 +0000 Subject: vmxnet3: prevent div-by-zero panic when ring resizing uninitialized dev Linux is free to call ethtool ops as soon as a netdev exists when probe finishes. However, we only allocate vmxnet3 tx/rx queues and initialize the rx_buf_per_pkt field in struct vmxnet3_adapter when the interface is opened (UP). Signed-off-by: Bhavesh Davda Signed-off-by: Shreyas N Bhatewara Signed-off-by: David S. Miller --- drivers/net/vmxnet3/vmxnet3_drv.c | 1 + drivers/net/vmxnet3/vmxnet3_ethtool.c | 6 ++++++ drivers/net/vmxnet3/vmxnet3_int.h | 4 ++-- 3 files changed, 9 insertions(+), 2 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/vmxnet3/vmxnet3_drv.c b/drivers/net/vmxnet3/vmxnet3_drv.c index 4aad350e4da..eae7a03d4f9 100644 --- a/drivers/net/vmxnet3/vmxnet3_drv.c +++ b/drivers/net/vmxnet3/vmxnet3_drv.c @@ -2958,6 +2958,7 @@ vmxnet3_probe_device(struct pci_dev *pdev, adapter->num_rx_queues = num_rx_queues; adapter->num_tx_queues = num_tx_queues; + adapter->rx_buf_per_pkt = 1; size = sizeof(struct Vmxnet3_TxQueueDesc) * adapter->num_tx_queues; size += sizeof(struct Vmxnet3_RxQueueDesc) * adapter->num_rx_queues; diff --git a/drivers/net/vmxnet3/vmxnet3_ethtool.c b/drivers/net/vmxnet3/vmxnet3_ethtool.c index a0feb17a023..63a124340cb 100644 --- a/drivers/net/vmxnet3/vmxnet3_ethtool.c +++ b/drivers/net/vmxnet3/vmxnet3_ethtool.c @@ -472,6 +472,12 @@ vmxnet3_set_ringparam(struct net_device *netdev, VMXNET3_RX_RING_MAX_SIZE) return -EINVAL; + /* if adapter not yet initialized, do nothing */ + if (adapter->rx_buf_per_pkt == 0) { + netdev_err(netdev, "adapter not completely initialized, " + "ring size cannot be changed yet\n"); + return -EOPNOTSUPP; + } /* round it up to a multiple of VMXNET3_RING_SIZE_ALIGN */ new_tx_ring_size = (param->tx_pending + VMXNET3_RING_SIZE_MASK) & diff --git a/drivers/net/vmxnet3/vmxnet3_int.h b/drivers/net/vmxnet3/vmxnet3_int.h index 3198384689d..35418146fa1 100644 --- a/drivers/net/vmxnet3/vmxnet3_int.h +++ b/drivers/net/vmxnet3/vmxnet3_int.h @@ -70,10 +70,10 @@ /* * Version numbers */ -#define VMXNET3_DRIVER_VERSION_STRING "1.1.29.0-k" +#define VMXNET3_DRIVER_VERSION_STRING "1.1.30.0-k" /* a 32-bit int, each byte encode a verion number in VMXNET3_DRIVER_VERSION */ -#define VMXNET3_DRIVER_VERSION_NUM 0x01011D00 +#define VMXNET3_DRIVER_VERSION_NUM 0x01011E00 #if defined(CONFIG_PCI_MSI) /* RSS only makes sense if MSI-X is supported. */ -- cgit v1.2.3-70-g09d2 From 9cb6cb7ed11cd3b69c47bb414983603a6ff20b1d Mon Sep 17 00:00:00 2001 From: Zang MingJie Date: Wed, 6 Mar 2013 04:37:37 +0000 Subject: vxlan: fix oops when delete netns containing vxlan The following script will produce a kernel oops: sudo ip netns add v sudo ip netns exec v ip ad add 127.0.0.1/8 dev lo sudo ip netns exec v ip link set lo up sudo ip netns exec v ip ro add 224.0.0.0/4 dev lo sudo ip netns exec v ip li add vxlan0 type vxlan id 42 group 239.1.1.1 dev lo sudo ip netns exec v ip link set vxlan0 up sudo ip netns del v where inspect by gdb: Program received signal SIGSEGV, Segmentation fault. [Switching to Thread 107] 0xffffffffa0289e33 in ?? () (gdb) bt #0 vxlan_leave_group (dev=0xffff88001bafa000) at drivers/net/vxlan.c:533 #1 vxlan_stop (dev=0xffff88001bafa000) at drivers/net/vxlan.c:1087 #2 0xffffffff812cc498 in __dev_close_many (head=head@entry=0xffff88001f2e7dc8) at net/core/dev.c:1299 #3 0xffffffff812cd920 in dev_close_many (head=head@entry=0xffff88001f2e7dc8) at net/core/dev.c:1335 #4 0xffffffff812cef31 in rollback_registered_many (head=head@entry=0xffff88001f2e7dc8) at net/core/dev.c:4851 #5 0xffffffff812cf040 in unregister_netdevice_many (head=head@entry=0xffff88001f2e7dc8) at net/core/dev.c:5752 #6 0xffffffff812cf1ba in default_device_exit_batch (net_list=0xffff88001f2e7e18) at net/core/dev.c:6170 #7 0xffffffff812cab27 in cleanup_net (work=) at net/core/net_namespace.c:302 #8 0xffffffff810540ef in process_one_work (worker=0xffff88001ba9ed40, work=0xffffffff8167d020) at kernel/workqueue.c:2157 #9 0xffffffff810549d0 in worker_thread (__worker=__worker@entry=0xffff88001ba9ed40) at kernel/workqueue.c:2276 #10 0xffffffff8105870c in kthread (_create=0xffff88001f2e5d68) at kernel/kthread.c:168 #11 #12 0x0000000000000000 in ?? () #13 0x0000000000000000 in ?? () (gdb) fr 0 #0 vxlan_leave_group (dev=0xffff88001bafa000) at drivers/net/vxlan.c:533 533 struct sock *sk = vn->sock->sk; (gdb) l 528 static int vxlan_leave_group(struct net_device *dev) 529 { 530 struct vxlan_dev *vxlan = netdev_priv(dev); 531 struct vxlan_net *vn = net_generic(dev_net(dev), vxlan_net_id); 532 int err = 0; 533 struct sock *sk = vn->sock->sk; 534 struct ip_mreqn mreq = { 535 .imr_multiaddr.s_addr = vxlan->gaddr, 536 .imr_ifindex = vxlan->link, 537 }; (gdb) p vn->sock $4 = (struct socket *) 0x0 The kernel calls `vxlan_exit_net` when deleting the netns before shutting down vxlan interfaces. Later the removal of all vxlan interfaces, where `vn->sock` is already gone causes the oops. so we should manually shutdown all interfaces before deleting `vn->sock` as the patch does. Signed-off-by: Zang MingJie Signed-off-by: David S. Miller --- drivers/net/vxlan.c | 8 ++++++++ 1 file changed, 8 insertions(+) (limited to 'drivers/net') diff --git a/drivers/net/vxlan.c b/drivers/net/vxlan.c index c3e3d2929ee..7cee7a3068e 100644 --- a/drivers/net/vxlan.c +++ b/drivers/net/vxlan.c @@ -1506,6 +1506,14 @@ static __net_init int vxlan_init_net(struct net *net) static __net_exit void vxlan_exit_net(struct net *net) { struct vxlan_net *vn = net_generic(net, vxlan_net_id); + struct vxlan_dev *vxlan; + unsigned h; + + rtnl_lock(); + for (h = 0; h < VNI_HASH_SIZE; ++h) + hlist_for_each_entry(vxlan, &vn->vni_list[h], hlist) + dev_close(vxlan->dev); + rtnl_unlock(); if (vn->sock) { sk_release_kernel(vn->sock->sk); -- cgit v1.2.3-70-g09d2 From 80028ea1c0afc24d4ddeb8dd2a9992fff03616ca Mon Sep 17 00:00:00 2001 From: Veaceslav Falico Date: Wed, 6 Mar 2013 07:10:32 +0000 Subject: bonding: fire NETDEV_RELEASE event only on 0 slaves Currently, if we set up netconsole over bonding and release a slave, netconsole will stop logging on the whole bonding device. Change the behavior to stop the netconsole only when the last slave is released. Signed-off-by: Veaceslav Falico Acked-by: Neil Horman Signed-off-by: David S. Miller --- drivers/net/bonding/bond_main.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/bonding/bond_main.c b/drivers/net/bonding/bond_main.c index 7bd068a6056..8b4e96e01d6 100644 --- a/drivers/net/bonding/bond_main.c +++ b/drivers/net/bonding/bond_main.c @@ -1964,7 +1964,6 @@ static int __bond_release_one(struct net_device *bond_dev, } block_netpoll_tx(); - call_netdevice_notifiers(NETDEV_RELEASE, bond_dev); write_lock_bh(&bond->lock); slave = bond_get_slave_by_dev(bond, slave_dev); @@ -2066,8 +2065,10 @@ static int __bond_release_one(struct net_device *bond_dev, write_unlock_bh(&bond->lock); unblock_netpoll_tx(); - if (bond->slave_cnt == 0) + if (bond->slave_cnt == 0) { call_netdevice_notifiers(NETDEV_CHANGEADDR, bond->dev); + call_netdevice_notifiers(NETDEV_RELEASE, bond->dev); + } bond_compute_features(bond); if (!(bond_dev->features & NETIF_F_VLAN_CHALLENGED) && -- cgit v1.2.3-70-g09d2 From 260055bb1f1f8b5328601816c50fd7e0dfda7dff Mon Sep 17 00:00:00 2001 From: Phil Sutter Date: Wed, 6 Mar 2013 07:49:02 +0000 Subject: mv643xx_eth: fix for disabled autoneg When autoneg has been disabled in the PHY (Marvell 88E1118 here), auto negotiation between MAC and PHY seem non-functional anymore. The only way I found to workaround this is to manually configure the MAC with the settings sent to the PHY earlier. Signed-off-by: Phil Sutter Signed-off-by: David S. Miller --- drivers/net/ethernet/marvell/mv643xx_eth.c | 55 +++++++++++++++++++++++++++--- 1 file changed, 51 insertions(+), 4 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/marvell/mv643xx_eth.c b/drivers/net/ethernet/marvell/mv643xx_eth.c index 29140502b71..6562c736a1d 100644 --- a/drivers/net/ethernet/marvell/mv643xx_eth.c +++ b/drivers/net/ethernet/marvell/mv643xx_eth.c @@ -1081,6 +1081,45 @@ static void txq_set_fixed_prio_mode(struct tx_queue *txq) /* mii management interface *************************************************/ +static void mv643xx_adjust_pscr(struct mv643xx_eth_private *mp) +{ + u32 pscr = rdlp(mp, PORT_SERIAL_CONTROL); + u32 autoneg_disable = FORCE_LINK_PASS | + DISABLE_AUTO_NEG_SPEED_GMII | + DISABLE_AUTO_NEG_FOR_FLOW_CTRL | + DISABLE_AUTO_NEG_FOR_DUPLEX; + + if (mp->phy->autoneg == AUTONEG_ENABLE) { + /* enable auto negotiation */ + pscr &= ~autoneg_disable; + goto out_write; + } + + pscr |= autoneg_disable; + + if (mp->phy->speed == SPEED_1000) { + /* force gigabit, half duplex not supported */ + pscr |= SET_GMII_SPEED_TO_1000; + pscr |= SET_FULL_DUPLEX_MODE; + goto out_write; + } + + pscr &= ~SET_GMII_SPEED_TO_1000; + + if (mp->phy->speed == SPEED_100) + pscr |= SET_MII_SPEED_TO_100; + else + pscr &= ~SET_MII_SPEED_TO_100; + + if (mp->phy->duplex == DUPLEX_FULL) + pscr |= SET_FULL_DUPLEX_MODE; + else + pscr &= ~SET_FULL_DUPLEX_MODE; + +out_write: + wrlp(mp, PORT_SERIAL_CONTROL, pscr); +} + static irqreturn_t mv643xx_eth_err_irq(int irq, void *dev_id) { struct mv643xx_eth_shared_private *msp = dev_id; @@ -1499,6 +1538,7 @@ static int mv643xx_eth_set_settings(struct net_device *dev, struct ethtool_cmd *cmd) { struct mv643xx_eth_private *mp = netdev_priv(dev); + int ret; if (mp->phy == NULL) return -EINVAL; @@ -1508,7 +1548,10 @@ mv643xx_eth_set_settings(struct net_device *dev, struct ethtool_cmd *cmd) */ cmd->advertising &= ~ADVERTISED_1000baseT_Half; - return phy_ethtool_sset(mp->phy, cmd); + ret = phy_ethtool_sset(mp->phy, cmd); + if (!ret) + mv643xx_adjust_pscr(mp); + return ret; } static void mv643xx_eth_get_drvinfo(struct net_device *dev, @@ -2442,11 +2485,15 @@ static int mv643xx_eth_stop(struct net_device *dev) static int mv643xx_eth_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd) { struct mv643xx_eth_private *mp = netdev_priv(dev); + int ret; - if (mp->phy != NULL) - return phy_mii_ioctl(mp->phy, ifr, cmd); + if (mp->phy == NULL) + return -ENOTSUPP; - return -EOPNOTSUPP; + ret = phy_mii_ioctl(mp->phy, ifr, cmd); + if (!ret) + mv643xx_adjust_pscr(mp); + return ret; } static int mv643xx_eth_change_mtu(struct net_device *dev, int new_mtu) -- cgit v1.2.3-70-g09d2 From ba81276b1a5e3cf0674cb0e6d9525e5ae0c98695 Mon Sep 17 00:00:00 2001 From: Vlad Yasevich Date: Thu, 7 Mar 2013 07:59:25 +0000 Subject: team: unsyc the devices addresses when port is removed When a team port is removed, unsync all devices addresses that may have been synched to the port devices. CC: Jiri Pirko Signed-off-by: Vlad Yasevich Acked-by: Jiri Pirko Signed-off-by: David S. Miller --- drivers/net/team/team.c | 2 ++ 1 file changed, 2 insertions(+) (limited to 'drivers/net') diff --git a/drivers/net/team/team.c b/drivers/net/team/team.c index 05c5efe8459..bf341929787 100644 --- a/drivers/net/team/team.c +++ b/drivers/net/team/team.c @@ -1138,6 +1138,8 @@ static int team_port_del(struct team *team, struct net_device *port_dev) netdev_upper_dev_unlink(port_dev, dev); team_port_disable_netpoll(port); vlan_vids_del_by_dev(port_dev, dev); + dev_uc_unsync(port_dev, dev); + dev_mc_unsync(port_dev, dev); dev_close(port_dev); team_port_leave(team, port); -- cgit v1.2.3-70-g09d2 From 87ab7f6f2874f1115817e394a7ed2dea1c72549e Mon Sep 17 00:00:00 2001 From: Vlad Yasevich Date: Thu, 7 Mar 2013 10:21:48 +0000 Subject: macvlan: Set IFF_UNICAST_FLT flag to prevent unnecessary promisc mode. Macvlan already supports hw address filters. Set the IFF_UNICAST_FLT so that it doesn't needlesly enter PROMISC mode when macvlans are stacked. Signed-of-by: Vlad Yasevich Signed-off-by: David S. Miller --- drivers/net/macvlan.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers/net') diff --git a/drivers/net/macvlan.c b/drivers/net/macvlan.c index 417b2af1aa8..73abbc1655d 100644 --- a/drivers/net/macvlan.c +++ b/drivers/net/macvlan.c @@ -660,6 +660,7 @@ void macvlan_common_setup(struct net_device *dev) ether_setup(dev); dev->priv_flags &= ~(IFF_XMIT_DST_RELEASE | IFF_TX_SKB_SHARING); + dev->priv_flags |= IFF_UNICAST_FLT; dev->netdev_ops = &macvlan_netdev_ops; dev->destructor = free_netdev; dev->header_ops = &macvlan_hard_header_ops, -- cgit v1.2.3-70-g09d2 From 5f3347e6e75768985a088d959c49fb66263087b6 Mon Sep 17 00:00:00 2001 From: Yaniv Rosner Date: Thu, 7 Mar 2013 13:27:33 +0000 Subject: bnx2x: Fix intermittent long KR2 link up time When a KR2 device is connected to a KR link-partner, sometimes it requires disabling KR2 for the link to come up. To get a KR2 link up later, in case no base pages are seen, the KR2 is restored. The problem was that some link partners cleared their advertised BP/NP after around two seconds, causing the driver to disable/enable KR2 link all the time. The fix was to wait at least 5 seconds before checking KR2 recovery. Signed-off-by: Yaniv Rosner Signed-off-by: Eilon Greenstein Signed-off-by: David S. Miller --- drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c | 11 +++++++++++ drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.h | 3 ++- 2 files changed, 13 insertions(+), 1 deletion(-) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c index 31c5787970d..00ac4932f4c 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c @@ -12527,6 +12527,7 @@ int bnx2x_phy_init(struct link_params *params, struct link_vars *vars) vars->flow_ctrl = BNX2X_FLOW_CTRL_NONE; vars->mac_type = MAC_TYPE_NONE; vars->phy_flags = 0; + vars->check_kr2_recovery_cnt = 0; /* Driver opens NIG-BRB filters */ bnx2x_set_rx_filter(params, 1); /* Check if link flap can be avoided */ @@ -13411,6 +13412,7 @@ static void bnx2x_disable_kr2(struct link_params *params, vars->link_attr_sync &= ~LINK_ATTR_SYNC_KR2_ENABLE; bnx2x_update_link_attr(params, vars->link_attr_sync); + vars->check_kr2_recovery_cnt = CHECK_KR2_RECOVERY_CNT; /* Restart AN on leading lane */ bnx2x_warpcore_restart_AN_KR(phy, params); } @@ -13439,6 +13441,15 @@ static void bnx2x_check_kr2_wa(struct link_params *params, return; } + /* Once KR2 was disabled, wait 5 seconds before checking KR2 recovery + * since some switches tend to reinit the AN process and clear the + * advertised BP/NP after ~2 seconds causing the KR2 to be disabled + * and recovered many times + */ + if (vars->check_kr2_recovery_cnt > 0) { + vars->check_kr2_recovery_cnt--; + return; + } lane = bnx2x_get_warpcore_lane(phy, params); CL22_WR_OVER_CL45(bp, phy, MDIO_REG_BANK_AER_BLOCK, MDIO_AER_BLOCK_AER_REG, lane); diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.h b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.h index be5c195d03d..f92fcf71be0 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.h +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.h @@ -342,7 +342,8 @@ struct link_vars { u32 link_status; u32 eee_status; u8 fault_detected; - u8 rsrv1; + u8 check_kr2_recovery_cnt; +#define CHECK_KR2_RECOVERY_CNT 5 u16 periodic_flags; #define PERIODIC_FLAGS_LINK_EVENT 0x0001 -- cgit v1.2.3-70-g09d2 From d9169323308a63fdd967920b9c63a00394ae7c85 Mon Sep 17 00:00:00 2001 From: Yaniv Rosner Date: Thu, 7 Mar 2013 13:27:34 +0000 Subject: bnx2x: Fix SFP+ misconfiguration in iSCSI boot scenario Fix a problem in which iSCSI-boot installation fails when switching SFP+ boot port and moving the SFP+ module prior to boot. The SFP+ insertion triggers an interrupt which configures the SFP+ module wrongly before interface is loaded. Signed-off-by: Yaniv Rosner Signed-off-by: Eilon Greenstein Signed-off-by: David S. Miller --- drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c | 6 +++++- drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.h | 1 + 2 files changed, 6 insertions(+), 1 deletion(-) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c index 00ac4932f4c..77ebae0ac64 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c @@ -8647,7 +8647,9 @@ void bnx2x_handle_module_detect_int(struct link_params *params) MDIO_WC_DEVAD, MDIO_WC_REG_DIGITAL5_MISC6, &rx_tx_in_reset); - if (!rx_tx_in_reset) { + if ((!rx_tx_in_reset) && + (params->link_flags & + PHY_INITIALIZED)) { bnx2x_warpcore_reset_lane(bp, phy, 1); bnx2x_warpcore_config_sfi(phy, params); bnx2x_warpcore_reset_lane(bp, phy, 0); @@ -12528,6 +12530,7 @@ int bnx2x_phy_init(struct link_params *params, struct link_vars *vars) vars->mac_type = MAC_TYPE_NONE; vars->phy_flags = 0; vars->check_kr2_recovery_cnt = 0; + params->link_flags = PHY_INITIALIZED; /* Driver opens NIG-BRB filters */ bnx2x_set_rx_filter(params, 1); /* Check if link flap can be avoided */ @@ -12692,6 +12695,7 @@ int bnx2x_lfa_reset(struct link_params *params, struct bnx2x *bp = params->bp; vars->link_up = 0; vars->phy_flags = 0; + params->link_flags &= ~PHY_INITIALIZED; if (!params->lfa_base) return bnx2x_link_reset(params, vars, 1); /* diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.h b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.h index f92fcf71be0..56c2aae4e2c 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.h +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.h @@ -309,6 +309,7 @@ struct link_params { req_flow_ctrl is set to AUTO */ u16 link_flags; #define LINK_FLAGS_INT_DISABLED (1<<0) +#define PHY_INITIALIZED (1<<1) u32 lfa_base; }; -- cgit v1.2.3-70-g09d2 From 84421b99cedc3443e76d2a594f3c815d5cb9a8e1 Mon Sep 17 00:00:00 2001 From: Nithin Sujir Date: Fri, 8 Mar 2013 08:01:24 +0000 Subject: tg3: Update link_up flag for phylib devices Commit f4a46d1f46a8fece34edd2023e054072b02e110d introduced a bug where the ifconfig stats would remain 0 for phylib devices. This is due to tp->link_up flag never becoming true causing tg3_periodic_fetch_stats() to return. The link_up flag was being updated in tg3_test_and_report_link_chg() after setting up the phy. This function however, is not called for phylib devices since the driver does not do the phy setup. This patch moves the link_up flag update into the common tg3_link_report() function that gets called for phylib devices as well for non phylib devices when the link state changes. To avoid updating link_up twice, we replace tg3_carrier_...() calls that are followed by tg3_link_report(), with netif_carrier_...(). We can then remove the unused tg3_carrier_on() function. CC: Reported-by: OGAWA Hirofumi Signed-off-by: Nithin Nayak Sujir Signed-off-by: Michael Chan Signed-off-by: David S. Miller --- drivers/net/ethernet/broadcom/tg3.c | 14 +++++--------- 1 file changed, 5 insertions(+), 9 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/broadcom/tg3.c b/drivers/net/ethernet/broadcom/tg3.c index fdb9b565541..93729f94235 100644 --- a/drivers/net/ethernet/broadcom/tg3.c +++ b/drivers/net/ethernet/broadcom/tg3.c @@ -1869,6 +1869,8 @@ static void tg3_link_report(struct tg3 *tp) tg3_ump_link_report(tp); } + + tp->link_up = netif_carrier_ok(tp->dev); } static u16 tg3_advert_flowctrl_1000X(u8 flow_ctrl) @@ -2522,12 +2524,6 @@ static int tg3_phy_reset_5703_4_5(struct tg3 *tp) return err; } -static void tg3_carrier_on(struct tg3 *tp) -{ - netif_carrier_on(tp->dev); - tp->link_up = true; -} - static void tg3_carrier_off(struct tg3 *tp) { netif_carrier_off(tp->dev); @@ -2553,7 +2549,7 @@ static int tg3_phy_reset(struct tg3 *tp) return -EBUSY; if (netif_running(tp->dev) && tp->link_up) { - tg3_carrier_off(tp); + netif_carrier_off(tp->dev); tg3_link_report(tp); } @@ -4262,9 +4258,9 @@ static bool tg3_test_and_report_link_chg(struct tg3 *tp, int curr_link_up) { if (curr_link_up != tp->link_up) { if (curr_link_up) { - tg3_carrier_on(tp); + netif_carrier_on(tp->dev); } else { - tg3_carrier_off(tp); + netif_carrier_off(tp->dev); if (tp->phy_flags & TG3_PHYFLG_MII_SERDES) tp->phy_flags &= ~TG3_PHYFLG_PARALLEL_DETECT; } -- cgit v1.2.3-70-g09d2 From 5f0fabf84d7b52f979dcbafa3d3c530c60d9a92c Mon Sep 17 00:00:00 2001 From: Bing Zhao Date: Thu, 7 Mar 2013 20:00:16 -0800 Subject: mwifiex: fix potential out-of-boundary access to ibss rate table smatch found this error: CHECK drivers/net/wireless/mwifiex/join.c drivers/net/wireless/mwifiex/join.c:1121 mwifiex_cmd_802_11_ad_hoc_join() error: testing array offset 'i' after use. Cc: # 3.0+ Signed-off-by: Bing Zhao Signed-off-by: John W. Linville --- drivers/net/wireless/mwifiex/join.c | 7 +++---- 1 file changed, 3 insertions(+), 4 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/wireless/mwifiex/join.c b/drivers/net/wireless/mwifiex/join.c index 246aa62a481..2fe0ceba440 100644 --- a/drivers/net/wireless/mwifiex/join.c +++ b/drivers/net/wireless/mwifiex/join.c @@ -1117,10 +1117,9 @@ mwifiex_cmd_802_11_ad_hoc_join(struct mwifiex_private *priv, adhoc_join->bss_descriptor.bssid, adhoc_join->bss_descriptor.ssid); - for (i = 0; bss_desc->supported_rates[i] && - i < MWIFIEX_SUPPORTED_RATES; - i++) - ; + for (i = 0; i < MWIFIEX_SUPPORTED_RATES && + bss_desc->supported_rates[i]; i++) + ; rates_size = i; /* Copy Data Rates from the Rates recorded in scan response */ -- cgit v1.2.3-70-g09d2 From 664899786cb49cb52f620e06ac19c0be524a7cfa Mon Sep 17 00:00:00 2001 From: Larry Finger Date: Wed, 27 Feb 2013 14:10:30 -0600 Subject: rtlwifi: rtl8192cu: Fix schedule while atomic bug splat When run at debug 3 or higher, rtl8192cu reports a BUG as follows: BUG: scheduling while atomic: kworker/u:0/5281/0x00000002 INFO: lockdep is turned off. Modules linked in: rtl8192cu rtl8192c_common rtlwifi fuse af_packet bnep bluetooth b43 mac80211 cfg80211 ipv6 snd_hda_codec_conexant kvm_amd k vm snd_hda_intel snd_hda_codec bcma rng_core snd_pcm ssb mmc_core snd_seq snd_timer snd_seq_device snd i2c_nforce2 sr_mod pcmcia forcedeth i2c_core soundcore cdrom sg serio_raw k8temp hwmon joydev ac battery pcmcia_core snd_page_alloc video button wmi autofs4 ext4 mbcache jbd2 crc16 thermal processor scsi_dh_alua scsi_dh_hp_sw scsi_dh_rdac scsi_dh_emc scsi_dh ata_generic pata_acpi pata_amd [last unloaded: rtlwifi] Pid: 5281, comm: kworker/u:0 Tainted: G W 3.8.0-wl+ #119 Call Trace: [] __schedule_bug+0x62/0x70 [] __schedule+0x730/0xa30 [] ? usb_hcd_link_urb_to_ep+0x19/0xa0 [] schedule+0x24/0x70 [] schedule_timeout+0x18c/0x2f0 [] ? wait_for_common+0x40/0x180 [] ? ehci_urb_enqueue+0xf1/0xee0 [] ? trace_hardirqs_on+0xd/0x10 [] wait_for_common+0xe5/0x180 [] ? try_to_wake_up+0x2d0/0x2d0 [] wait_for_completion_timeout+0xe/0x10 [] usb_start_wait_urb+0x8c/0x100 [] usb_control_msg+0xd9/0x130 [] _usb_read_sync+0xcd/0x140 [rtlwifi] [] _usb_read32_sync+0xe/0x10 [rtlwifi] [] rtl92cu_update_hal_rate_table+0x1a5/0x1f0 [rtl8192cu] The cause is a synchronous read from routine rtl92cu_update_hal_rate_table(). The resulting output is not critical, thus the debug statement is deleted. Reported-by: Jussi Kivilinna Signed-off-by: Larry Finger Cc: Stable Signed-off-by: John W. Linville --- drivers/net/wireless/rtlwifi/rtl8192cu/hw.c | 2 -- 1 file changed, 2 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/wireless/rtlwifi/rtl8192cu/hw.c b/drivers/net/wireless/rtlwifi/rtl8192cu/hw.c index b1ccff474c7..3c6e18c38e3 100644 --- a/drivers/net/wireless/rtlwifi/rtl8192cu/hw.c +++ b/drivers/net/wireless/rtlwifi/rtl8192cu/hw.c @@ -2058,8 +2058,6 @@ void rtl92cu_update_hal_rate_table(struct ieee80211_hw *hw, (shortgi_rate << 4) | (shortgi_rate); } rtl_write_dword(rtlpriv, REG_ARFR0 + ratr_index * 4, ratr_value); - RT_TRACE(rtlpriv, COMP_RATR, DBG_DMESG, "%x\n", - rtl_read_dword(rtlpriv, REG_ARFR0)); } void rtl92cu_update_hal_rate_mask(struct ieee80211_hw *hw, u8 rssi_level) -- cgit v1.2.3-70-g09d2 From fef4c86e59a76f2ec1a77d5732f40752700bd5dd Mon Sep 17 00:00:00 2001 From: David Oostdyk Date: Fri, 8 Mar 2013 08:28:15 +0000 Subject: rrunner.c: fix possible memory leak in rr_init_one() In the event that register_netdev() failed, the rrpriv->evt_ring allocation would have not been freed. Signed-off-by: David Oostdyk Signed-off-by: David S. Miller --- drivers/net/hippi/rrunner.c | 3 +++ 1 file changed, 3 insertions(+) (limited to 'drivers/net') diff --git a/drivers/net/hippi/rrunner.c b/drivers/net/hippi/rrunner.c index e5b19b05690..3c4d6274bb9 100644 --- a/drivers/net/hippi/rrunner.c +++ b/drivers/net/hippi/rrunner.c @@ -202,6 +202,9 @@ static int rr_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) return 0; out: + if (rrpriv->evt_ring) + pci_free_consistent(pdev, EVT_RING_SIZE, rrpriv->evt_ring, + rrpriv->evt_ring_dma); if (rrpriv->rx_ring) pci_free_consistent(pdev, RX_TOTAL_SIZE, rrpriv->rx_ring, rrpriv->rx_ring_dma); -- cgit v1.2.3-70-g09d2 From 47ce9c4821fa41ef72c1004e1a362d08334cd717 Mon Sep 17 00:00:00 2001 From: Santosh Rastapur Date: Fri, 8 Mar 2013 03:35:29 +0000 Subject: cxgb4: Allow for backward compatibility with new VPD scheme. New scheme calls for 3rd party VPD at offset 0x0 and Chelsio VPD at offset 0x400 of the function. If no 3rd party VPD is present, then a copy of Chelsio's VPD will be at offset 0x0 to keep in line with PCI spec which requires the VPD to be present at offset 0x0. Signed-off-by: Santosh Rastapur Signed-off-by: Vipul Pandya Signed-off-by: David S. Miller --- drivers/net/ethernet/chelsio/cxgb4/t4_hw.c | 12 +++++++++--- 1 file changed, 9 insertions(+), 3 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/chelsio/cxgb4/t4_hw.c b/drivers/net/ethernet/chelsio/cxgb4/t4_hw.c index 4ce62031f62..8049268ce0f 100644 --- a/drivers/net/ethernet/chelsio/cxgb4/t4_hw.c +++ b/drivers/net/ethernet/chelsio/cxgb4/t4_hw.c @@ -497,8 +497,9 @@ int t4_memory_write(struct adapter *adap, int mtype, u32 addr, u32 len, } #define EEPROM_STAT_ADDR 0x7bfc -#define VPD_BASE 0 #define VPD_LEN 512 +#define VPD_BASE 0x400 +#define VPD_BASE_OLD 0 /** * t4_seeprom_wp - enable/disable EEPROM write protection @@ -524,7 +525,7 @@ int t4_seeprom_wp(struct adapter *adapter, bool enable) int get_vpd_params(struct adapter *adapter, struct vpd_params *p) { u32 cclk_param, cclk_val; - int i, ret; + int i, ret, addr; int ec, sn; u8 *vpd, csum; unsigned int vpdr_len, kw_offset, id_len; @@ -533,7 +534,12 @@ int get_vpd_params(struct adapter *adapter, struct vpd_params *p) if (!vpd) return -ENOMEM; - ret = pci_read_vpd(adapter->pdev, VPD_BASE, VPD_LEN, vpd); + ret = pci_read_vpd(adapter->pdev, VPD_BASE, sizeof(u32), vpd); + if (ret < 0) + goto out; + addr = *vpd == 0x82 ? VPD_BASE : VPD_BASE_OLD; + + ret = pci_read_vpd(adapter->pdev, addr, VPD_LEN, vpd); if (ret < 0) goto out; -- cgit v1.2.3-70-g09d2 From 3f315bef23075ea8a98a6fe4221a83b83456d970 Mon Sep 17 00:00:00 2001 From: Veaceslav Falico Date: Mon, 11 Mar 2013 00:21:48 +0000 Subject: netconsole: don't call __netpoll_cleanup() while atomic __netpoll_cleanup() is called in netconsole_netdev_event() while holding a spinlock. Release/acquire the spinlock before/after it and restart the loop. Also, disable the netconsole completely, because we won't have chance after the restart of the loop, and might end up in a situation where nt->enabled == 1 and nt->np.dev == NULL. Signed-off-by: Veaceslav Falico Acked-by: Neil Horman Signed-off-by: David S. Miller --- drivers/net/netconsole.c | 15 +++++++++------ 1 file changed, 9 insertions(+), 6 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/netconsole.c b/drivers/net/netconsole.c index 37add21a3d7..59ac143dec2 100644 --- a/drivers/net/netconsole.c +++ b/drivers/net/netconsole.c @@ -666,6 +666,7 @@ static int netconsole_netdev_event(struct notifier_block *this, goto done; spin_lock_irqsave(&target_list_lock, flags); +restart: list_for_each_entry(nt, &target_list, list) { netconsole_target_get(nt); if (nt->np.dev == dev) { @@ -678,15 +679,17 @@ static int netconsole_netdev_event(struct notifier_block *this, case NETDEV_UNREGISTER: /* * rtnl_lock already held + * we might sleep in __netpoll_cleanup() */ - if (nt->np.dev) { - __netpoll_cleanup(&nt->np); - dev_put(nt->np.dev); - nt->np.dev = NULL; - } + spin_unlock_irqrestore(&target_list_lock, flags); + __netpoll_cleanup(&nt->np); + spin_lock_irqsave(&target_list_lock, flags); + dev_put(nt->np.dev); + nt->np.dev = NULL; nt->enabled = 0; stopped = true; - break; + netconsole_target_put(nt); + goto restart; } } netconsole_target_put(nt); -- cgit v1.2.3-70-g09d2 From fae8563b25f73dc584a07bcda7a82750ff4f7672 Mon Sep 17 00:00:00 2001 From: Ben Hutchings Date: Wed, 27 Feb 2013 16:50:38 +0000 Subject: sfc: Only use TX push if a single descriptor is to be written Using TX push when notifying the NIC of multiple new descriptors in the ring will very occasionally cause the TX DMA engine to re-use an old descriptor. This can result in a duplicated or partly duplicated packet (new headers with old data), or an IOMMU page fault. This does not happen when the pushed descriptor is the only one written. TX push also provides little latency benefit when a packet requires more than one descriptor. Signed-off-by: Ben Hutchings --- drivers/net/ethernet/sfc/nic.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/sfc/nic.c b/drivers/net/ethernet/sfc/nic.c index 0ad790cc473..eaa8e874a3c 100644 --- a/drivers/net/ethernet/sfc/nic.c +++ b/drivers/net/ethernet/sfc/nic.c @@ -376,7 +376,8 @@ efx_may_push_tx_desc(struct efx_tx_queue *tx_queue, unsigned int write_count) return false; tx_queue->empty_read_count = 0; - return ((empty_read_count ^ write_count) & ~EFX_EMPTY_COUNT_VALID) == 0; + return ((empty_read_count ^ write_count) & ~EFX_EMPTY_COUNT_VALID) == 0 + && tx_queue->write_count - write_count == 1; } /* For each entry inserted into the software descriptor ring, create a -- cgit v1.2.3-70-g09d2 From d35162f89b8f00537d7b240b76d2d0e8b8d29aa0 Mon Sep 17 00:00:00 2001 From: Daniel Mack Date: Tue, 12 Mar 2013 06:31:19 +0000 Subject: net: ethernet: cpsw: fix usage of cpdma_check_free_tx_desc() Commit fae50823d0 ("net: ethernet: davinci_cpdma: Add boundary for rx and tx descriptors") introduced a function to check the current allocation state of tx packets. The return value is taken into account to stop the netqork queue on the adapter in case there are no free slots. However, cpdma_check_free_tx_desc() returns 'true' if there is room in the bitmap, not 'false', so the usage of the function is wrong. Signed-off-by: Daniel Mack Cc: Mugunthan V N Reported-by: Sven Neumann Reported-by: Andreas Fenkart Tested-by: Mugunthan V N Acked-by: Mugunthan V N Tested-by: Andreas Fenkart Signed-off-by: David S. Miller --- drivers/net/ethernet/ti/cpsw.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/ti/cpsw.c b/drivers/net/ethernet/ti/cpsw.c index 01ffbc48698..75c48558e6f 100644 --- a/drivers/net/ethernet/ti/cpsw.c +++ b/drivers/net/ethernet/ti/cpsw.c @@ -905,7 +905,7 @@ static netdev_tx_t cpsw_ndo_start_xmit(struct sk_buff *skb, /* If there is no more tx desc left free then we need to * tell the kernel to stop sending us tx frames. */ - if (unlikely(cpdma_check_free_tx_desc(priv->txch))) + if (unlikely(!cpdma_check_free_tx_desc(priv->txch))) netif_stop_queue(ndev); return NETDEV_TX_OK; -- cgit v1.2.3-70-g09d2 From 876254ae2758d50dcb08c7bd00caf6a806571178 Mon Sep 17 00:00:00 2001 From: Veaceslav Falico Date: Tue, 12 Mar 2013 06:31:32 +0000 Subject: bonding: don't call update_speed_duplex() under spinlocks bond_update_speed_duplex() might sleep while calling underlying slave's routines. Move it out of atomic context in bond_enslave() and remove it from bond_miimon_commit() - it was introduced by commit 546add79, however when the slave interfaces go up/change state it's their responsibility to fire NETDEV_UP/NETDEV_CHANGE events so that bonding can properly update their speed. I've tested it on all combinations of ifup/ifdown, autoneg/speed/duplex changes, remote-controlled and local, on (not) MII-based cards. All changes are visible. Signed-off-by: Veaceslav Falico Signed-off-by: David S. Miller --- drivers/net/bonding/bond_main.c | 6 ++---- 1 file changed, 2 insertions(+), 4 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/bonding/bond_main.c b/drivers/net/bonding/bond_main.c index 8b4e96e01d6..6bbd90e1123 100644 --- a/drivers/net/bonding/bond_main.c +++ b/drivers/net/bonding/bond_main.c @@ -1746,6 +1746,8 @@ int bond_enslave(struct net_device *bond_dev, struct net_device *slave_dev) bond_compute_features(bond); + bond_update_speed_duplex(new_slave); + read_lock(&bond->lock); new_slave->last_arp_rx = jiffies - @@ -1798,8 +1800,6 @@ int bond_enslave(struct net_device *bond_dev, struct net_device *slave_dev) new_slave->link == BOND_LINK_DOWN ? "DOWN" : (new_slave->link == BOND_LINK_UP ? "UP" : "BACK")); - bond_update_speed_duplex(new_slave); - if (USES_PRIMARY(bond->params.mode) && bond->params.primary[0]) { /* if there is a primary slave, remember it */ if (strcmp(bond->params.primary, new_slave->dev->name) == 0) { @@ -2374,8 +2374,6 @@ static void bond_miimon_commit(struct bonding *bond) bond_set_backup_slave(slave); } - bond_update_speed_duplex(slave); - pr_info("%s: link status definitely up for interface %s, %u Mbps %s duplex.\n", bond->dev->name, slave->dev->name, slave->speed, slave->duplex ? "full" : "half"); -- cgit v1.2.3-70-g09d2 From 7c6cdead7cc9a99650d15497aae47d7472217eb1 Mon Sep 17 00:00:00 2001 From: Nithin Sujir Date: Tue, 12 Mar 2013 15:32:48 +0000 Subject: tg3: 5715 does not link up when autoneg off Commit d13ba512cbba7de5d55d7a3b2aae7d83c8921457 ("tg3: Remove SPEED_UNKNOWN checks") cleaned up the autoneg advertisement by removing some dead code. One effect of this change was that the advertisement register would not be updated if autoneg is turned off. This exposed a bug on the 5715 device w.r.t linking. The 5715 defaults to advertise only 10Mb Full duplex. But with autoneg disabled, it needs the configured speed enabled in the advertisement register to link up. This patch adds the work around to advertise all speeds on the 5715 when autoneg is disabled. Reported-by: Marcin Miotk Reviewed-by: Benjamin Li Signed-off-by: Nithin Nayak Sujir Signed-off-by: Michael Chan Signed-off-by: David S. Miller --- drivers/net/ethernet/broadcom/tg3.c | 8 ++++++++ 1 file changed, 8 insertions(+) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/broadcom/tg3.c b/drivers/net/ethernet/broadcom/tg3.c index 93729f94235..67d2663b397 100644 --- a/drivers/net/ethernet/broadcom/tg3.c +++ b/drivers/net/ethernet/broadcom/tg3.c @@ -4130,6 +4130,14 @@ static void tg3_phy_copper_begin(struct tg3 *tp) tp->link_config.active_speed = tp->link_config.speed; tp->link_config.active_duplex = tp->link_config.duplex; + if (tg3_asic_rev(tp) == ASIC_REV_5714) { + /* With autoneg disabled, 5715 only links up when the + * advertisement register has the configured speed + * enabled. + */ + tg3_writephy(tp, MII_ADVERTISE, ADVERTISE_ALL); + } + bmcr = 0; switch (tp->link_config.speed) { default: -- cgit v1.2.3-70-g09d2 From b701f16dd490d3f346724050f17d60beda094998 Mon Sep 17 00:00:00 2001 From: Bjørn Mork Date: Wed, 13 Mar 2013 02:25:17 +0000 Subject: net: qmi_wwan: set correct altsetting for Gobi 1K devices MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit commit bd877e4 ("net: qmi_wwan: use a single bind function for all device types") made Gobi 1K devices fail probing. Using the number of endpoints in the default altsetting to decide whether the function use one or two interfaces is wrong. Other altsettings may provide more endpoints. With Gobi 1K devices, USB interface #3's altsetting is 0 by default, but altsetting 0 only provides one interrupt endpoint and is not sufficent for QMI. Altsetting 1 provides all 3 endpoints required for qmi_wwan and works with QMI. Gobi 1K layout for intf#3 is: Interface Descriptor: 255/255/255 bInterfaceNumber 3 bAlternateSetting 0 Endpoint Descriptor: Interrupt IN Interface Descriptor: 255/255/255 bInterfaceNumber 3 bAlternateSetting 1 Endpoint Descriptor: Interrupt IN Endpoint Descriptor: Bulk IN Endpoint Descriptor: Bulk OUT Prior to commit bd877e4, we would call usbnet_get_endpoints before giving up finding enough endpoints. Removing the early endpoint number test and the strict functional descriptor requirement allow qmi_wwan_bind to continue until usbnet_get_endpoints has made the final attempt to collect endpoints. This restores the behaviour from before commit bd877e4 without losing the added benefit of using a single bind function. The driver has always required a CDC Union functional descriptor for two-interface functions. Using the existence of this descriptor to detect two-interface functions is the logically correct method. Reported-by: Dan Williams Signed-off-by: Bjørn Mork Tested-by: Dan Williams Signed-off-by: David S. Miller --- drivers/net/usb/qmi_wwan.c | 49 +++++++++++++++------------------------------- 1 file changed, 16 insertions(+), 33 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/usb/qmi_wwan.c b/drivers/net/usb/qmi_wwan.c index efb5c7c33a2..968d5d50751 100644 --- a/drivers/net/usb/qmi_wwan.c +++ b/drivers/net/usb/qmi_wwan.c @@ -139,16 +139,9 @@ static int qmi_wwan_bind(struct usbnet *dev, struct usb_interface *intf) BUILD_BUG_ON((sizeof(((struct usbnet *)0)->data) < sizeof(struct qmi_wwan_state))); - /* control and data is shared? */ - if (intf->cur_altsetting->desc.bNumEndpoints == 3) { - info->control = intf; - info->data = intf; - goto shared; - } - - /* else require a single interrupt status endpoint on control intf */ - if (intf->cur_altsetting->desc.bNumEndpoints != 1) - goto err; + /* set up initial state */ + info->control = intf; + info->data = intf; /* and a number of CDC descriptors */ while (len > 3) { @@ -207,25 +200,14 @@ next_desc: buf += h->bLength; } - /* did we find all the required ones? */ - if (!(found & (1 << USB_CDC_HEADER_TYPE)) || - !(found & (1 << USB_CDC_UNION_TYPE))) { - dev_err(&intf->dev, "CDC functional descriptors missing\n"); - goto err; - } - - /* verify CDC Union */ - if (desc->bInterfaceNumber != cdc_union->bMasterInterface0) { - dev_err(&intf->dev, "bogus CDC Union: master=%u\n", cdc_union->bMasterInterface0); - goto err; - } - - /* need to save these for unbind */ - info->control = intf; - info->data = usb_ifnum_to_if(dev->udev, cdc_union->bSlaveInterface0); - if (!info->data) { - dev_err(&intf->dev, "bogus CDC Union: slave=%u\n", cdc_union->bSlaveInterface0); - goto err; + /* Use separate control and data interfaces if we found a CDC Union */ + if (cdc_union) { + info->data = usb_ifnum_to_if(dev->udev, cdc_union->bSlaveInterface0); + if (desc->bInterfaceNumber != cdc_union->bMasterInterface0 || !info->data) { + dev_err(&intf->dev, "bogus CDC Union: master=%u, slave=%u\n", + cdc_union->bMasterInterface0, cdc_union->bSlaveInterface0); + goto err; + } } /* errors aren't fatal - we can live with the dynamic address */ @@ -235,11 +217,12 @@ next_desc: } /* claim data interface and set it up */ - status = usb_driver_claim_interface(driver, info->data, dev); - if (status < 0) - goto err; + if (info->control != info->data) { + status = usb_driver_claim_interface(driver, info->data, dev); + if (status < 0) + goto err; + } -shared: status = qmi_wwan_register_subdriver(dev); if (status < 0 && info->control != info->data) { usb_set_intfdata(info->data, NULL); -- cgit v1.2.3-70-g09d2 From 5818a46a999ad9546e68e8765a3ca1d9d87f9b4a Mon Sep 17 00:00:00 2001 From: John Crispin Date: Wed, 13 Mar 2013 13:20:15 +0100 Subject: rt2x00: fix rt2x00 to work with the new ralink SoC config symbols Since v3.9-rc1 the kernel has basic support for Ralink WiSoC. The config symbols are named slightly different than before. Fix the rt2x00 to match the new symbols. The commit causing this breakage is: commit ae2b5bb6570481b50a7175c64176b82da0a81836 Author: John Crispin Date: Sun Jan 20 22:05:30 2013 +0100 MIPS: ralink: adds Kbuild files Signed-off-by: John Crispin Acked-by: Gertjan van Wingerde Signed-off-by: John W. Linville --- drivers/net/wireless/rt2x00/Kconfig | 4 ++-- drivers/net/wireless/rt2x00/rt2800pci.c | 14 +++++++------- 2 files changed, 9 insertions(+), 9 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/wireless/rt2x00/Kconfig b/drivers/net/wireless/rt2x00/Kconfig index 44d6ead4334..2bf4efa3318 100644 --- a/drivers/net/wireless/rt2x00/Kconfig +++ b/drivers/net/wireless/rt2x00/Kconfig @@ -55,10 +55,10 @@ config RT61PCI config RT2800PCI tristate "Ralink rt27xx/rt28xx/rt30xx (PCI/PCIe/PCMCIA) support" - depends on PCI || RALINK_RT288X || RALINK_RT305X + depends on PCI || SOC_RT288X || SOC_RT305X select RT2800_LIB select RT2X00_LIB_PCI if PCI - select RT2X00_LIB_SOC if RALINK_RT288X || RALINK_RT305X + select RT2X00_LIB_SOC if SOC_RT288X || SOC_RT305X select RT2X00_LIB_FIRMWARE select RT2X00_LIB_CRYPTO select CRC_CCITT diff --git a/drivers/net/wireless/rt2x00/rt2800pci.c b/drivers/net/wireless/rt2x00/rt2800pci.c index 48a01aa21f1..ded73da4de0 100644 --- a/drivers/net/wireless/rt2x00/rt2800pci.c +++ b/drivers/net/wireless/rt2x00/rt2800pci.c @@ -89,7 +89,7 @@ static void rt2800pci_mcu_status(struct rt2x00_dev *rt2x00dev, const u8 token) rt2x00pci_register_write(rt2x00dev, H2M_MAILBOX_CID, ~0); } -#if defined(CONFIG_RALINK_RT288X) || defined(CONFIG_RALINK_RT305X) +#if defined(CONFIG_SOC_RT288X) || defined(CONFIG_SOC_RT305X) static int rt2800pci_read_eeprom_soc(struct rt2x00_dev *rt2x00dev) { void __iomem *base_addr = ioremap(0x1F040000, EEPROM_SIZE); @@ -107,7 +107,7 @@ static inline int rt2800pci_read_eeprom_soc(struct rt2x00_dev *rt2x00dev) { return -ENOMEM; } -#endif /* CONFIG_RALINK_RT288X || CONFIG_RALINK_RT305X */ +#endif /* CONFIG_SOC_RT288X || CONFIG_SOC_RT305X */ #ifdef CONFIG_PCI static void rt2800pci_eepromregister_read(struct eeprom_93cx6 *eeprom) @@ -1177,7 +1177,7 @@ MODULE_DEVICE_TABLE(pci, rt2800pci_device_table); #endif /* CONFIG_PCI */ MODULE_LICENSE("GPL"); -#if defined(CONFIG_RALINK_RT288X) || defined(CONFIG_RALINK_RT305X) +#if defined(CONFIG_SOC_RT288X) || defined(CONFIG_SOC_RT305X) static int rt2800soc_probe(struct platform_device *pdev) { return rt2x00soc_probe(pdev, &rt2800pci_ops); @@ -1194,7 +1194,7 @@ static struct platform_driver rt2800soc_driver = { .suspend = rt2x00soc_suspend, .resume = rt2x00soc_resume, }; -#endif /* CONFIG_RALINK_RT288X || CONFIG_RALINK_RT305X */ +#endif /* CONFIG_SOC_RT288X || CONFIG_SOC_RT305X */ #ifdef CONFIG_PCI static int rt2800pci_probe(struct pci_dev *pci_dev, @@ -1217,7 +1217,7 @@ static int __init rt2800pci_init(void) { int ret = 0; -#if defined(CONFIG_RALINK_RT288X) || defined(CONFIG_RALINK_RT305X) +#if defined(CONFIG_SOC_RT288X) || defined(CONFIG_SOC_RT305X) ret = platform_driver_register(&rt2800soc_driver); if (ret) return ret; @@ -1225,7 +1225,7 @@ static int __init rt2800pci_init(void) #ifdef CONFIG_PCI ret = pci_register_driver(&rt2800pci_driver); if (ret) { -#if defined(CONFIG_RALINK_RT288X) || defined(CONFIG_RALINK_RT305X) +#if defined(CONFIG_SOC_RT288X) || defined(CONFIG_SOC_RT305X) platform_driver_unregister(&rt2800soc_driver); #endif return ret; @@ -1240,7 +1240,7 @@ static void __exit rt2800pci_exit(void) #ifdef CONFIG_PCI pci_unregister_driver(&rt2800pci_driver); #endif -#if defined(CONFIG_RALINK_RT288X) || defined(CONFIG_RALINK_RT305X) +#if defined(CONFIG_SOC_RT288X) || defined(CONFIG_SOC_RT305X) platform_driver_unregister(&rt2800soc_driver); #endif } -- cgit v1.2.3-70-g09d2 From 9437a248e7cac427c898bdb11bd1ac6844a1ead4 Mon Sep 17 00:00:00 2001 From: Larry Finger Date: Wed, 13 Mar 2013 10:28:13 -0500 Subject: rtlwifi: rtl8192cu: Fix problem that prevents reassociation The driver was failing to clear the BSSID when a disconnect happened. That prevented a reconnection. This problem is reported at https://bugzilla.redhat.com/show_bug.cgi?id=789605, https://bugzilla.redhat.com/show_bug.cgi?id=866786, https://bugzilla.redhat.com/show_bug.cgi?id=906734, and https://bugzilla.kernel.org/show_bug.cgi?id=46171. Thanks to Jussi Kivilinna for making the critical observation that led to the solution. Reported-by: Jussi Kivilinna Tested-by: Jussi Kivilinna Tested-by: Alessandro Lannocca Signed-off-by: Larry Finger Cc: Stable Signed-off-by: John W. Linville --- drivers/net/wireless/rtlwifi/rtl8192cu/hw.c | 87 ++++++++++++----------------- 1 file changed, 35 insertions(+), 52 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/wireless/rtlwifi/rtl8192cu/hw.c b/drivers/net/wireless/rtlwifi/rtl8192cu/hw.c index 3c6e18c38e3..c08d0f4c5f3 100644 --- a/drivers/net/wireless/rtlwifi/rtl8192cu/hw.c +++ b/drivers/net/wireless/rtlwifi/rtl8192cu/hw.c @@ -1376,75 +1376,58 @@ void rtl92cu_card_disable(struct ieee80211_hw *hw) } void rtl92cu_set_check_bssid(struct ieee80211_hw *hw, bool check_bssid) -{ - /* dummy routine needed for callback from rtl_op_configure_filter() */ -} - -/*========================================================================== */ - -static void _rtl92cu_set_check_bssid(struct ieee80211_hw *hw, - enum nl80211_iftype type) { struct rtl_priv *rtlpriv = rtl_priv(hw); - u32 reg_rcr = rtl_read_dword(rtlpriv, REG_RCR); struct rtl_hal *rtlhal = rtl_hal(rtlpriv); - struct rtl_phy *rtlphy = &(rtlpriv->phy); - u8 filterout_non_associated_bssid = false; + u32 reg_rcr = rtl_read_dword(rtlpriv, REG_RCR); - switch (type) { - case NL80211_IFTYPE_ADHOC: - case NL80211_IFTYPE_STATION: - filterout_non_associated_bssid = true; - break; - case NL80211_IFTYPE_UNSPECIFIED: - case NL80211_IFTYPE_AP: - default: - break; - } - if (filterout_non_associated_bssid) { + if (rtlpriv->psc.rfpwr_state != ERFON) + return; + + if (check_bssid) { + u8 tmp; if (IS_NORMAL_CHIP(rtlhal->version)) { - switch (rtlphy->current_io_type) { - case IO_CMD_RESUME_DM_BY_SCAN: - reg_rcr |= (RCR_CBSSID_DATA | RCR_CBSSID_BCN); - rtlpriv->cfg->ops->set_hw_reg(hw, - HW_VAR_RCR, (u8 *)(®_rcr)); - /* enable update TSF */ - _rtl92cu_set_bcn_ctrl_reg(hw, 0, BIT(4)); - break; - case IO_CMD_PAUSE_DM_BY_SCAN: - reg_rcr &= ~(RCR_CBSSID_DATA | RCR_CBSSID_BCN); - rtlpriv->cfg->ops->set_hw_reg(hw, - HW_VAR_RCR, (u8 *)(®_rcr)); - /* disable update TSF */ - _rtl92cu_set_bcn_ctrl_reg(hw, BIT(4), 0); - break; - } + reg_rcr |= (RCR_CBSSID_DATA | RCR_CBSSID_BCN); + tmp = BIT(4); } else { - reg_rcr |= (RCR_CBSSID); - rtlpriv->cfg->ops->set_hw_reg(hw, HW_VAR_RCR, - (u8 *)(®_rcr)); - _rtl92cu_set_bcn_ctrl_reg(hw, 0, (BIT(4)|BIT(5))); + reg_rcr |= RCR_CBSSID; + tmp = BIT(4) | BIT(5); } - } else if (filterout_non_associated_bssid == false) { + rtlpriv->cfg->ops->set_hw_reg(hw, HW_VAR_RCR, + (u8 *) (®_rcr)); + _rtl92cu_set_bcn_ctrl_reg(hw, 0, tmp); + } else { + u8 tmp; if (IS_NORMAL_CHIP(rtlhal->version)) { - reg_rcr &= (~(RCR_CBSSID_DATA | RCR_CBSSID_BCN)); - rtlpriv->cfg->ops->set_hw_reg(hw, HW_VAR_RCR, - (u8 *)(®_rcr)); - _rtl92cu_set_bcn_ctrl_reg(hw, BIT(4), 0); + reg_rcr &= ~(RCR_CBSSID_DATA | RCR_CBSSID_BCN); + tmp = BIT(4); } else { - reg_rcr &= (~RCR_CBSSID); - rtlpriv->cfg->ops->set_hw_reg(hw, HW_VAR_RCR, - (u8 *)(®_rcr)); - _rtl92cu_set_bcn_ctrl_reg(hw, (BIT(4)|BIT(5)), 0); + reg_rcr &= ~RCR_CBSSID; + tmp = BIT(4) | BIT(5); } + reg_rcr &= (~(RCR_CBSSID_DATA | RCR_CBSSID_BCN)); + rtlpriv->cfg->ops->set_hw_reg(hw, + HW_VAR_RCR, (u8 *) (®_rcr)); + _rtl92cu_set_bcn_ctrl_reg(hw, tmp, 0); } } +/*========================================================================== */ + int rtl92cu_set_network_type(struct ieee80211_hw *hw, enum nl80211_iftype type) { + struct rtl_priv *rtlpriv = rtl_priv(hw); + if (_rtl92cu_set_media_status(hw, type)) return -EOPNOTSUPP; - _rtl92cu_set_check_bssid(hw, type); + + if (rtlpriv->mac80211.link_state == MAC80211_LINKED) { + if (type != NL80211_IFTYPE_AP) + rtl92cu_set_check_bssid(hw, true); + } else { + rtl92cu_set_check_bssid(hw, false); + } + return 0; } -- cgit v1.2.3-70-g09d2 From d97e74976982a35168c7f131cce0d93537337a26 Mon Sep 17 00:00:00 2001 From: Lucas Stach Date: Thu, 14 Mar 2013 05:12:01 +0000 Subject: net: fec: restart the FEC when PHY speed changes Proviously we would only restart the FEC when PHY link or duplex state changed. PHY does not always bring down the link for speed changes, in which case we would not detect any change and keep FEC running. Switching link speed without restarting the FEC results in the FEC being stuck in an indefinite state, generating error conditions for every packet. Signed-off-by: Lucas Stach Signed-off-by: David S. Miller --- drivers/net/ethernet/freescale/fec.c | 26 +++++++++++++++----------- drivers/net/ethernet/freescale/fec.h | 1 + 2 files changed, 16 insertions(+), 11 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/freescale/fec.c b/drivers/net/ethernet/freescale/fec.c index 069a155d16e..61d2e6202bf 100644 --- a/drivers/net/ethernet/freescale/fec.c +++ b/drivers/net/ethernet/freescale/fec.c @@ -934,24 +934,28 @@ static void fec_enet_adjust_link(struct net_device *ndev) goto spin_unlock; } - /* Duplex link change */ if (phy_dev->link) { - if (fep->full_duplex != phy_dev->duplex) { - fec_restart(ndev, phy_dev->duplex); - /* prevent unnecessary second fec_restart() below */ + if (!fep->link) { fep->link = phy_dev->link; status_change = 1; } - } - /* Link on or off change */ - if (phy_dev->link != fep->link) { - fep->link = phy_dev->link; - if (phy_dev->link) + if (fep->full_duplex != phy_dev->duplex) + status_change = 1; + + if (phy_dev->speed != fep->speed) { + fep->speed = phy_dev->speed; + status_change = 1; + } + + /* if any of the above changed restart the FEC */ + if (status_change) fec_restart(ndev, phy_dev->duplex); - else + } else { + if (fep->link) { fec_stop(ndev); - status_change = 1; + status_change = 1; + } } spin_unlock: diff --git a/drivers/net/ethernet/freescale/fec.h b/drivers/net/ethernet/freescale/fec.h index f5390071efd..eb437296283 100644 --- a/drivers/net/ethernet/freescale/fec.h +++ b/drivers/net/ethernet/freescale/fec.h @@ -240,6 +240,7 @@ struct fec_enet_private { phy_interface_t phy_interface; int link; int full_duplex; + int speed; struct completion mdio_done; int irq[FEC_IRQ_NUM]; int bufdesc_ex; -- cgit v1.2.3-70-g09d2 From 3f104c38259dcb3e5443c246f0805bc04d887cc3 Mon Sep 17 00:00:00 2001 From: Georg Hofmann Date: Thu, 14 Mar 2013 06:54:09 +0000 Subject: net: fec: fix missing napi_disable call Commit dc975382d2ef36be7e78fac3717927de1a5abcd8 introduces napi support but never calls napi_disable. This will generate a kernel oops (kernel BUG at include/linux/netdevice.h:473!) every time, when ndo_stop is called followed by ndo_start. Add the missing napi_diable call. Signed-off-by: Georg Hofmann Signed-off-by: David S. Miller --- drivers/net/ethernet/freescale/fec.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/freescale/fec.c b/drivers/net/ethernet/freescale/fec.c index 61d2e6202bf..e3f39372ce2 100644 --- a/drivers/net/ethernet/freescale/fec.c +++ b/drivers/net/ethernet/freescale/fec.c @@ -1441,6 +1441,7 @@ fec_enet_close(struct net_device *ndev) struct fec_enet_private *fep = netdev_priv(ndev); /* Don't know what to do yet. */ + napi_disable(&fep->napi); fep->opened = 0; netif_stop_queue(ndev); fec_stop(ndev); -- cgit v1.2.3-70-g09d2 From 1e731cb986d564c4938bcba89ff5f4aea1d8e2fb Mon Sep 17 00:00:00 2001 From: Robert de Vries Date: Thu, 14 Mar 2013 09:29:06 +0000 Subject: smsc75xx: configuration help incorrectly mentions smsc95xx The Kconfig file help information incorrectly mentions that the SMSC LAN75xx config option is for SMSC LAN95xx devices. Signed-off-by: Robert de Vries Signed-off-by: David S. Miller --- drivers/net/usb/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/net') diff --git a/drivers/net/usb/Kconfig b/drivers/net/usb/Kconfig index 3b6e9b83342..7c769d8e25a 100644 --- a/drivers/net/usb/Kconfig +++ b/drivers/net/usb/Kconfig @@ -268,7 +268,7 @@ config USB_NET_SMSC75XX select CRC16 select CRC32 help - This option adds support for SMSC LAN95XX based USB 2.0 + This option adds support for SMSC LAN75XX based USB 2.0 Gigabit Ethernet adapters. config USB_NET_SMSC95XX -- cgit v1.2.3-70-g09d2 From 1e8bbe6cd02fc300c88bd48244ce61ad9c7d1776 Mon Sep 17 00:00:00 2001 From: Bjørn Mork Date: Thu, 14 Mar 2013 01:05:13 +0000 Subject: net: cdc_ncm, cdc_mbim: allow user to prefer NCM for backwards compatibility MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit commit bd329e1 ("net: cdc_ncm: do not bind to NCM compatible MBIM devices") introduced a new policy, preferring MBIM for dual NCM/MBIM functions if the cdc_mbim driver was enabled. This caused a regression for users wanting to use NCM. Devices implementing NCM backwards compatibility according to section 3.2 of the MBIM v1.0 specification allow either NCM or MBIM on a single USB function, using different altsettings. The cdc_ncm and cdc_mbim drivers will both probe such functions, and must agree on a common policy for selecting either MBIM or NCM. Until now, this policy has been set at build time based on CONFIG_USB_NET_CDC_MBIM. Use a module parameter to set the system policy at runtime, allowing the user to prefer NCM on systems with the cdc_mbim driver. Cc: Greg Suarez Cc: Alexey Orishko Reported-by: Geir Haatveit Reported-by: Tommi Kyntola Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=54791 Signed-off-by: Bjørn Mork Signed-off-by: David S. Miller --- drivers/net/usb/cdc_mbim.c | 11 +--------- drivers/net/usb/cdc_ncm.c | 49 +++++++++++++++++++++++++++++---------------- include/linux/usb/cdc_ncm.h | 1 + 3 files changed, 34 insertions(+), 27 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/usb/cdc_mbim.c b/drivers/net/usb/cdc_mbim.c index 248d2dc765a..16c84299729 100644 --- a/drivers/net/usb/cdc_mbim.c +++ b/drivers/net/usb/cdc_mbim.c @@ -68,18 +68,9 @@ static int cdc_mbim_bind(struct usbnet *dev, struct usb_interface *intf) struct cdc_ncm_ctx *ctx; struct usb_driver *subdriver = ERR_PTR(-ENODEV); int ret = -ENODEV; - u8 data_altsetting = CDC_NCM_DATA_ALTSETTING_NCM; + u8 data_altsetting = cdc_ncm_select_altsetting(dev, intf); struct cdc_mbim_state *info = (void *)&dev->data; - /* see if interface supports MBIM alternate setting */ - if (intf->num_altsetting == 2) { - if (!cdc_ncm_comm_intf_is_mbim(intf->cur_altsetting)) - usb_set_interface(dev->udev, - intf->cur_altsetting->desc.bInterfaceNumber, - CDC_NCM_COMM_ALTSETTING_MBIM); - data_altsetting = CDC_NCM_DATA_ALTSETTING_MBIM; - } - /* Probably NCM, defer for cdc_ncm_bind */ if (!cdc_ncm_comm_intf_is_mbim(intf->cur_altsetting)) goto err; diff --git a/drivers/net/usb/cdc_ncm.c b/drivers/net/usb/cdc_ncm.c index 61b74a2b89a..4709fa3497c 100644 --- a/drivers/net/usb/cdc_ncm.c +++ b/drivers/net/usb/cdc_ncm.c @@ -55,6 +55,14 @@ #define DRIVER_VERSION "14-Mar-2012" +#if IS_ENABLED(CONFIG_USB_NET_CDC_MBIM) +static bool prefer_mbim = true; +#else +static bool prefer_mbim; +#endif +module_param(prefer_mbim, bool, S_IRUGO | S_IWUSR); +MODULE_PARM_DESC(prefer_mbim, "Prefer MBIM setting on dual NCM/MBIM functions"); + static void cdc_ncm_txpath_bh(unsigned long param); static void cdc_ncm_tx_timeout_start(struct cdc_ncm_ctx *ctx); static enum hrtimer_restart cdc_ncm_tx_timer_cb(struct hrtimer *hr_timer); @@ -550,9 +558,12 @@ void cdc_ncm_unbind(struct usbnet *dev, struct usb_interface *intf) } EXPORT_SYMBOL_GPL(cdc_ncm_unbind); -static int cdc_ncm_bind(struct usbnet *dev, struct usb_interface *intf) +/* Select the MBIM altsetting iff it is preferred and available, + * returning the number of the corresponding data interface altsetting + */ +u8 cdc_ncm_select_altsetting(struct usbnet *dev, struct usb_interface *intf) { - int ret; + struct usb_host_interface *alt; /* The MBIM spec defines a NCM compatible default altsetting, * which we may have matched: @@ -568,23 +579,27 @@ static int cdc_ncm_bind(struct usbnet *dev, struct usb_interface *intf) * endpoint descriptors, shall be constructed according to * the rules given in section 6 (USB Device Model) of this * specification." - * - * Do not bind to such interfaces, allowing cdc_mbim to handle - * them */ -#if IS_ENABLED(CONFIG_USB_NET_CDC_MBIM) - if ((intf->num_altsetting == 2) && - !usb_set_interface(dev->udev, - intf->cur_altsetting->desc.bInterfaceNumber, - CDC_NCM_COMM_ALTSETTING_MBIM)) { - if (cdc_ncm_comm_intf_is_mbim(intf->cur_altsetting)) - return -ENODEV; - else - usb_set_interface(dev->udev, - intf->cur_altsetting->desc.bInterfaceNumber, - CDC_NCM_COMM_ALTSETTING_NCM); + if (prefer_mbim && intf->num_altsetting == 2) { + alt = usb_altnum_to_altsetting(intf, CDC_NCM_COMM_ALTSETTING_MBIM); + if (alt && cdc_ncm_comm_intf_is_mbim(alt) && + !usb_set_interface(dev->udev, + intf->cur_altsetting->desc.bInterfaceNumber, + CDC_NCM_COMM_ALTSETTING_MBIM)) + return CDC_NCM_DATA_ALTSETTING_MBIM; } -#endif + return CDC_NCM_DATA_ALTSETTING_NCM; +} +EXPORT_SYMBOL_GPL(cdc_ncm_select_altsetting); + +static int cdc_ncm_bind(struct usbnet *dev, struct usb_interface *intf) +{ + int ret; + + /* MBIM backwards compatible function? */ + cdc_ncm_select_altsetting(dev, intf); + if (cdc_ncm_comm_intf_is_mbim(intf->cur_altsetting)) + return -ENODEV; /* NCM data altsetting is always 1 */ ret = cdc_ncm_bind_common(dev, intf, 1); diff --git a/include/linux/usb/cdc_ncm.h b/include/linux/usb/cdc_ncm.h index 3b8f9d4fc3f..cc25b70af33 100644 --- a/include/linux/usb/cdc_ncm.h +++ b/include/linux/usb/cdc_ncm.h @@ -127,6 +127,7 @@ struct cdc_ncm_ctx { u16 connected; }; +extern u8 cdc_ncm_select_altsetting(struct usbnet *dev, struct usb_interface *intf); extern int cdc_ncm_bind_common(struct usbnet *dev, struct usb_interface *intf, u8 data_altsetting); extern void cdc_ncm_unbind(struct usbnet *dev, struct usb_interface *intf); extern struct sk_buff *cdc_ncm_fill_tx_frame(struct cdc_ncm_ctx *ctx, struct sk_buff *skb, __le32 sign); -- cgit v1.2.3-70-g09d2 From db0b82760ef84562b5c0fa880c22b4f352545554 Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Thu, 14 Mar 2013 11:56:42 +0000 Subject: ethernet/tulip: DE4x5 needs VIRT_TO_BUS The automated ARM build tests have shown that the tulip de4x5 driver uses the old-style virt_to_bus() interface on some architectures. Alpha, Sparc and PowerPC did not hit this problem, because they use a different code path, and most other architectures actually do provide VIRT_TO_BUS. Signed-off-by: Arnd Bergmann Cc: Grant Grundler Cc: netdev@vger.kernel.org Signed-off-by: David S. Miller --- drivers/net/ethernet/dec/tulip/Kconfig | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/dec/tulip/Kconfig b/drivers/net/ethernet/dec/tulip/Kconfig index 0c37fb2cc86..1df33c799c0 100644 --- a/drivers/net/ethernet/dec/tulip/Kconfig +++ b/drivers/net/ethernet/dec/tulip/Kconfig @@ -108,6 +108,7 @@ config TULIP_DM910X config DE4X5 tristate "Generic DECchip & DIGITAL EtherWORKS PCI/EISA" depends on (PCI || EISA) + depends on VIRT_TO_BUS || ALPHA || PPC || SPARC select CRC32 ---help--- This is support for the DIGITAL series of PCI/EISA Ethernet cards. -- cgit v1.2.3-70-g09d2 From 75b9b61bb8a18e75afe7b10dd55681e748fa27df Mon Sep 17 00:00:00 2001 From: Mugunthan V N Date: Fri, 15 Mar 2013 04:10:16 +0000 Subject: drivers: net: ethernet: ti: davinci_emac: fix usage of cpdma_check_free_tx_desc() Fix which was done in the following commit in cpsw driver has to be taken forward to davinci emac driver as well. commit d35162f89b8f00537d7b240b76d2d0e8b8d29aa0 Author: Daniel Mack Date: Tue Mar 12 06:31:19 2013 +0000 net: ethernet: cpsw: fix usage of cpdma_check_free_tx_desc() Commit fae50823d0 ("net: ethernet: davinci_cpdma: Add boundary for rx and tx descriptors") introduced a function to check the current allocation state of tx packets. The return value is taken into account to stop the netqork queue on the adapter in case there are no free slots. However, cpdma_check_free_tx_desc() returns 'true' if there is room in the bitmap, not 'false', so the usage of the function is wrong. Reported-by: Prabhakar Lad Tested-by: Prabhakar Lad Signed-off-by: Mugunthan V N Signed-off-by: David S. Miller --- drivers/net/ethernet/ti/davinci_emac.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/ti/davinci_emac.c b/drivers/net/ethernet/ti/davinci_emac.c index 52c05366599..ae1b77aa199 100644 --- a/drivers/net/ethernet/ti/davinci_emac.c +++ b/drivers/net/ethernet/ti/davinci_emac.c @@ -1102,7 +1102,7 @@ static int emac_dev_xmit(struct sk_buff *skb, struct net_device *ndev) /* If there is no more tx desc left free then we need to * tell the kernel to stop sending us tx frames. */ - if (unlikely(cpdma_check_free_tx_desc(priv->txchan))) + if (unlikely(!cpdma_check_free_tx_desc(priv->txchan))) netif_stop_queue(ndev); return NETDEV_TX_OK; -- cgit v1.2.3-70-g09d2 From 722c6f585088a2c392b4c5d01b87a584bb8fb73f Mon Sep 17 00:00:00 2001 From: Michal Schmidt Date: Fri, 15 Mar 2013 05:27:54 +0000 Subject: bnx2x: add missing napi deletion in error path If the hardware initialization fails in bnx2x_nic_load() after adding napi objects, they would not be deleted. A subsequent attempt to unload the bnx2x module detects a corruption in the napi list. Add the missing napi deletion to the error path. Signed-off-by: Michal Schmidt Acked-by: Dmitry Kravkov Signed-off-by: David S. Miller --- drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c index a923bc4d5a1..4046f97378c 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c @@ -2760,6 +2760,7 @@ load_error2: bp->port.pmf = 0; load_error1: bnx2x_napi_disable(bp); + bnx2x_del_all_napi(bp); /* clear pf_load status, as it was already set */ if (IS_PF(bp)) -- cgit v1.2.3-70-g09d2 From b009aac12cd0fe34293c68af8ac48b85be3bd858 Mon Sep 17 00:00:00 2001 From: Maciej Å»enczykowski Date: Fri, 15 Mar 2013 11:56:17 +0000 Subject: bnx2x: fix occasional statistics off-by-4GB error MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The UPDATE_QSTAT function introduced on February 15, 2012 in commit 1355b704b9ba "bnx2x: consistent statistics after internal driver reload" incorrectly fails to handle overflow during addition of the lower 32-bit field of a stat. This bug is present since 3.4-rc1 and should thus be considered a candidate for stable 3.4+ releases. Google-Bug-Id: 8374428 Signed-off-by: Maciej Å»enczykowski Cc: Mintz Yuval Acked-by: Eilon Greenstein Signed-off-by: David S. Miller --- drivers/net/ethernet/broadcom/bnx2x/bnx2x_stats.h | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_stats.h b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_stats.h index 364e37ecbc5..198f6f1c9ad 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_stats.h +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_stats.h @@ -459,8 +459,9 @@ struct bnx2x_fw_port_stats_old { #define UPDATE_QSTAT(s, t) \ do { \ - qstats->t##_hi = qstats_old->t##_hi + le32_to_cpu(s.hi); \ qstats->t##_lo = qstats_old->t##_lo + le32_to_cpu(s.lo); \ + qstats->t##_hi = qstats_old->t##_hi + le32_to_cpu(s.hi) \ + + ((qstats->t##_lo < qstats_old->t##_lo) ? 1 : 0); \ } while (0) #define UPDATE_QSTAT_OLD(f) \ -- cgit v1.2.3-70-g09d2 From 7f42ace3118afedbd1848a349d01a11d9ca13d41 Mon Sep 17 00:00:00 2001 From: Stanislaw Gruszka Date: Thu, 14 Mar 2013 12:48:40 +0100 Subject: iwl3945: fix length of dma buffers commit bdb084b22d8aee66c87af5e9c36bd6cf7f3bccfd Author: Stanislaw Gruszka Date: Wed Feb 13 15:49:08 2013 +0100 iwlegacy: more checks for dma mapping errors broke il3945_tx_skb() dma buffer length settings, what results on firmware errors like showed below and make 3945 device non usable. iwl3945 0000:02:00.0: Microcode SW error detected. Restarting 0x82000008. iwl3945 0000:02:00.0: Loaded firmware version: 15.32.2.9 iwl3945 0000:02:00.0: Start IWL Error Log Dump: iwl3945 0000:02:00.0: Status: 0x000202E4, count: 1 iwl3945 0000:02:00.0: Desc Time asrtPC blink2 ilink1 nmiPC Line iwl3945 0000:02:00.0: SYSASSERT (0x5) 0000208934 0x008B6 0x0035E 0x00320 0x00000 267 iwl3945 0000:02:00.0: Error Reply type 0x00000001 cmd Reported-by: Zdenek Kabelac Reported-by: Krzysztof Kolasa Reported-by: Pedro Francisco Signed-off-by: Stanislaw Gruszka Signed-off-by: John W. Linville --- drivers/net/wireless/iwlegacy/3945-mac.c | 22 ++++++++++++---------- 1 file changed, 12 insertions(+), 10 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/wireless/iwlegacy/3945-mac.c b/drivers/net/wireless/iwlegacy/3945-mac.c index 3630a41df50..c353b5f19c8 100644 --- a/drivers/net/wireless/iwlegacy/3945-mac.c +++ b/drivers/net/wireless/iwlegacy/3945-mac.c @@ -475,6 +475,7 @@ il3945_tx_skb(struct il_priv *il, dma_addr_t txcmd_phys; int txq_id = skb_get_queue_mapping(skb); u16 len, idx, hdr_len; + u16 firstlen, secondlen; u8 id; u8 unicast; u8 sta_id; @@ -589,21 +590,22 @@ il3945_tx_skb(struct il_priv *il, len = sizeof(struct il3945_tx_cmd) + sizeof(struct il_cmd_header) + hdr_len; - len = (len + 3) & ~3; + firstlen = (len + 3) & ~3; /* Physical address of this Tx command's header (not MAC header!), * within command buffer array. */ txcmd_phys = - pci_map_single(il->pci_dev, &out_cmd->hdr, len, PCI_DMA_TODEVICE); + pci_map_single(il->pci_dev, &out_cmd->hdr, firstlen, + PCI_DMA_TODEVICE); if (unlikely(pci_dma_mapping_error(il->pci_dev, txcmd_phys))) goto drop_unlock; /* Set up TFD's 2nd entry to point directly to remainder of skb, * if any (802.11 null frames have no payload). */ - len = skb->len - hdr_len; - if (len) { + secondlen = skb->len - hdr_len; + if (secondlen > 0) { phys_addr = - pci_map_single(il->pci_dev, skb->data + hdr_len, len, + pci_map_single(il->pci_dev, skb->data + hdr_len, secondlen, PCI_DMA_TODEVICE); if (unlikely(pci_dma_mapping_error(il->pci_dev, phys_addr))) goto drop_unlock; @@ -611,12 +613,12 @@ il3945_tx_skb(struct il_priv *il, /* Add buffer containing Tx command and MAC(!) header to TFD's * first entry */ - il->ops->txq_attach_buf_to_tfd(il, txq, txcmd_phys, len, 1, 0); + il->ops->txq_attach_buf_to_tfd(il, txq, txcmd_phys, firstlen, 1, 0); dma_unmap_addr_set(out_meta, mapping, txcmd_phys); - dma_unmap_len_set(out_meta, len, len); - if (len) - il->ops->txq_attach_buf_to_tfd(il, txq, phys_addr, len, 0, - U32_PAD(len)); + dma_unmap_len_set(out_meta, len, firstlen); + if (secondlen > 0) + il->ops->txq_attach_buf_to_tfd(il, txq, phys_addr, secondlen, 0, + U32_PAD(secondlen)); if (!ieee80211_has_morefrags(hdr->frame_control)) { txq->need_update = 1; -- cgit v1.2.3-70-g09d2 From 74632d11a133b5baf6b9d622dd19d2f944d93d94 Mon Sep 17 00:00:00 2001 From: Felix Fietkau Date: Fri, 15 Mar 2013 14:53:31 +0100 Subject: ath9k_hw: revert chainmask to user configuration after calibration The commit 'ath9k_hw: fix calibration issues on chainmask that don't include chain 0' changed the hardware chainmask to the chip chainmask for the duration of the calibration, but the revert to user configuration in the reset path runs too early. That causes some issues with limiting the number of antennas (including spurious failure in hardware-generated packets). Fix this by reverting the chainmask after the essential parts of the calibration that need the workaround, and before NF calibration is run. Signed-off-by: Felix Fietkau Reported-by: Wojciech Dubowik Tested-by: Wojciech Dubowik Cc: stable@vger.kernel.org Signed-off-by: John W. Linville --- drivers/net/wireless/ath/ath9k/ar9003_calib.c | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'drivers/net') diff --git a/drivers/net/wireless/ath/ath9k/ar9003_calib.c b/drivers/net/wireless/ath/ath9k/ar9003_calib.c index 4cc13940c89..f76c3ca07a4 100644 --- a/drivers/net/wireless/ath/ath9k/ar9003_calib.c +++ b/drivers/net/wireless/ath/ath9k/ar9003_calib.c @@ -1023,6 +1023,7 @@ static bool ar9003_hw_init_cal(struct ath_hw *ah, AR_PHY_AGC_CONTROL_FLTR_CAL | AR_PHY_AGC_CONTROL_PKDET_CAL; + /* Use chip chainmask only for calibration */ ar9003_hw_set_chain_masks(ah, ah->caps.rx_chainmask, ah->caps.tx_chainmask); if (rtt) { @@ -1150,6 +1151,9 @@ skip_tx_iqcal: ar9003_hw_rtt_disable(ah); } + /* Revert chainmask to runtime parameters */ + ar9003_hw_set_chain_masks(ah, ah->rxchainmask, ah->txchainmask); + /* Initialize list pointers */ ah->cal_list = ah->cal_list_last = ah->cal_list_curr = NULL; -- cgit v1.2.3-70-g09d2 From 01d4ab96d2e7fceaad204e5a8710ce34e229b8c5 Mon Sep 17 00:00:00 2001 From: Felix Fietkau Date: Fri, 15 Mar 2013 16:18:44 +0100 Subject: ath9k: limit tx path hang check to normal data queues The beacon and multicast-buffer queues are managed by the beacon tasklet, and the generic tx path hang check does not help in any way here. Running it on those queues anyway can introduce some race conditions leading to unnecessary chip resets. Cc: stable@vger.kernel.org Signed-off-by: Felix Fietkau Signed-off-by: John W. Linville --- drivers/net/wireless/ath/ath9k/link.c | 26 +++++++++++++------------- 1 file changed, 13 insertions(+), 13 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/wireless/ath/ath9k/link.c b/drivers/net/wireless/ath/ath9k/link.c index ade3afb21f9..39c84ecf6a4 100644 --- a/drivers/net/wireless/ath/ath9k/link.c +++ b/drivers/net/wireless/ath/ath9k/link.c @@ -28,21 +28,21 @@ void ath_tx_complete_poll_work(struct work_struct *work) int i; bool needreset = false; - for (i = 0; i < ATH9K_NUM_TX_QUEUES; i++) - if (ATH_TXQ_SETUP(sc, i)) { - txq = &sc->tx.txq[i]; - ath_txq_lock(sc, txq); - if (txq->axq_depth) { - if (txq->axq_tx_inprogress) { - needreset = true; - ath_txq_unlock(sc, txq); - break; - } else { - txq->axq_tx_inprogress = true; - } + for (i = 0; i < IEEE80211_NUM_ACS; i++) { + txq = sc->tx.txq_map[i]; + + ath_txq_lock(sc, txq); + if (txq->axq_depth) { + if (txq->axq_tx_inprogress) { + needreset = true; + ath_txq_unlock(sc, txq); + break; + } else { + txq->axq_tx_inprogress = true; } - ath_txq_unlock_complete(sc, txq); } + ath_txq_unlock_complete(sc, txq); + } if (needreset) { ath_dbg(ath9k_hw_common(sc->sc_ah), RESET, -- cgit v1.2.3-70-g09d2 From 00d7ea11ff0783e24fe70778f3141270b561aaa1 Mon Sep 17 00:00:00 2001 From: Amitkumar Karwar Date: Fri, 15 Mar 2013 18:47:05 -0700 Subject: mwifiex: fix race when queuing commands Running the following script repeatedly on XO-4 with SD8787 produces command timeout and system lockup. insmod mwifiex_sdio.ko sleep 1 ifconfig eth0 up iwlist eth0 scan & sleep 0.5 rmmod mwifiex_sdio mwifiex_send_cmd_async() is called for sync as well as async commands. (mwifiex_send_cmd_sync() internally calls it for sync command.) "adapter->cmd_queued" gets filled inside mwifiex_send_cmd_async() routine for both types of commands. But it is used only for sync commands in mwifiex_wait_queue_complete(). This could lead to a race when two threads try to queue a sync command with another sync/async command simultaneously. Get rid of global variable and pass command node as a parameter to mwifiex_wait_queue_complete() to fix the problem. Cc: # 3.8 Reported-by: Daniel Drake Tested-by: Daniel Drake Tested-by: Marco Cesarano Signed-off-by: Amitkumar Karwar Signed-off-by: Bing Zhao Signed-off-by: John W. Linville --- drivers/net/wireless/mwifiex/cmdevt.c | 5 ++--- drivers/net/wireless/mwifiex/main.h | 4 ++-- drivers/net/wireless/mwifiex/scan.c | 8 ++++---- drivers/net/wireless/mwifiex/sta_ioctl.c | 10 ++-------- 4 files changed, 10 insertions(+), 17 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/wireless/mwifiex/cmdevt.c b/drivers/net/wireless/mwifiex/cmdevt.c index 20a6c555587..2ffabddbcfc 100644 --- a/drivers/net/wireless/mwifiex/cmdevt.c +++ b/drivers/net/wireless/mwifiex/cmdevt.c @@ -484,8 +484,6 @@ int mwifiex_send_cmd_sync(struct mwifiex_private *priv, uint16_t cmd_no, ret = mwifiex_send_cmd_async(priv, cmd_no, cmd_action, cmd_oid, data_buf); - if (!ret) - ret = mwifiex_wait_queue_complete(adapter); return ret; } @@ -588,9 +586,10 @@ int mwifiex_send_cmd_async(struct mwifiex_private *priv, uint16_t cmd_no, if (cmd_no == HostCmd_CMD_802_11_SCAN) { mwifiex_queue_scan_cmd(priv, cmd_node); } else { - adapter->cmd_queued = cmd_node; mwifiex_insert_cmd_to_pending_q(adapter, cmd_node, true); queue_work(adapter->workqueue, &adapter->main_work); + if (cmd_node->wait_q_enabled) + ret = mwifiex_wait_queue_complete(adapter, cmd_node); } return ret; diff --git a/drivers/net/wireless/mwifiex/main.h b/drivers/net/wireless/mwifiex/main.h index 553adfb0aa8..7035ade9af7 100644 --- a/drivers/net/wireless/mwifiex/main.h +++ b/drivers/net/wireless/mwifiex/main.h @@ -723,7 +723,6 @@ struct mwifiex_adapter { u16 cmd_wait_q_required; struct mwifiex_wait_queue cmd_wait_q; u8 scan_wait_q_woken; - struct cmd_ctrl_node *cmd_queued; spinlock_t queue_lock; /* lock for tx queues */ struct completion fw_load; u8 country_code[IEEE80211_COUNTRY_STRING_LEN]; @@ -1018,7 +1017,8 @@ int mwifiex_request_set_multicast_list(struct mwifiex_private *priv, struct mwifiex_multicast_list *mcast_list); int mwifiex_copy_mcast_addr(struct mwifiex_multicast_list *mlist, struct net_device *dev); -int mwifiex_wait_queue_complete(struct mwifiex_adapter *adapter); +int mwifiex_wait_queue_complete(struct mwifiex_adapter *adapter, + struct cmd_ctrl_node *cmd_queued); int mwifiex_bss_start(struct mwifiex_private *priv, struct cfg80211_bss *bss, struct cfg80211_ssid *req_ssid); int mwifiex_cancel_hs(struct mwifiex_private *priv, int cmd_type); diff --git a/drivers/net/wireless/mwifiex/scan.c b/drivers/net/wireless/mwifiex/scan.c index bb60c2754a9..d215b4d3c51 100644 --- a/drivers/net/wireless/mwifiex/scan.c +++ b/drivers/net/wireless/mwifiex/scan.c @@ -1388,10 +1388,13 @@ int mwifiex_scan_networks(struct mwifiex_private *priv, list_del(&cmd_node->list); spin_unlock_irqrestore(&adapter->scan_pending_q_lock, flags); - adapter->cmd_queued = cmd_node; mwifiex_insert_cmd_to_pending_q(adapter, cmd_node, true); queue_work(adapter->workqueue, &adapter->main_work); + + /* Perform internal scan synchronously */ + if (!priv->scan_request) + mwifiex_wait_queue_complete(adapter, cmd_node); } else { spin_unlock_irqrestore(&adapter->scan_pending_q_lock, flags); @@ -1946,9 +1949,6 @@ int mwifiex_request_scan(struct mwifiex_private *priv, /* Normal scan */ ret = mwifiex_scan_networks(priv, NULL); - if (!ret) - ret = mwifiex_wait_queue_complete(priv->adapter); - up(&priv->async_sem); return ret; diff --git a/drivers/net/wireless/mwifiex/sta_ioctl.c b/drivers/net/wireless/mwifiex/sta_ioctl.c index 9f33c92c90f..13100f8de3d 100644 --- a/drivers/net/wireless/mwifiex/sta_ioctl.c +++ b/drivers/net/wireless/mwifiex/sta_ioctl.c @@ -54,16 +54,10 @@ int mwifiex_copy_mcast_addr(struct mwifiex_multicast_list *mlist, * This function waits on a cmd wait queue. It also cancels the pending * request after waking up, in case of errors. */ -int mwifiex_wait_queue_complete(struct mwifiex_adapter *adapter) +int mwifiex_wait_queue_complete(struct mwifiex_adapter *adapter, + struct cmd_ctrl_node *cmd_queued) { int status; - struct cmd_ctrl_node *cmd_queued; - - if (!adapter->cmd_queued) - return 0; - - cmd_queued = adapter->cmd_queued; - adapter->cmd_queued = NULL; dev_dbg(adapter->dev, "cmd pending\n"); atomic_inc(&adapter->cmd_pending); -- cgit v1.2.3-70-g09d2 From a3e240cacc93a06bff3313e28938e980d01a2160 Mon Sep 17 00:00:00 2001 From: Bing Zhao Date: Fri, 15 Mar 2013 18:47:06 -0700 Subject: mwifiex: skip pending commands after function shutdown During rmmod mwifiex_sdio processing FUNC_SHUTDOWN command is sent to firmware. Firmware expcets only FUNC_INIT once WLAN function is shut down. Any command pending in the command queue should be ignored and freed. Cc: # 3.8 Tested-by: Daniel Drake Tested-by: Marco Cesarano Signed-off-by: Bing Zhao Signed-off-by: Amitkumar Karwar Signed-off-by: John W. Linville --- drivers/net/wireless/mwifiex/cmdevt.c | 17 ++++++++++++++--- 1 file changed, 14 insertions(+), 3 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/wireless/mwifiex/cmdevt.c b/drivers/net/wireless/mwifiex/cmdevt.c index 2ffabddbcfc..b5c8b962ce1 100644 --- a/drivers/net/wireless/mwifiex/cmdevt.c +++ b/drivers/net/wireless/mwifiex/cmdevt.c @@ -157,6 +157,20 @@ static int mwifiex_dnld_cmd_to_fw(struct mwifiex_private *priv, return -1; } + cmd_code = le16_to_cpu(host_cmd->command); + cmd_size = le16_to_cpu(host_cmd->size); + + if (adapter->hw_status == MWIFIEX_HW_STATUS_RESET && + cmd_code != HostCmd_CMD_FUNC_SHUTDOWN && + cmd_code != HostCmd_CMD_FUNC_INIT) { + dev_err(adapter->dev, + "DNLD_CMD: FW in reset state, ignore cmd %#x\n", + cmd_code); + mwifiex_complete_cmd(adapter, cmd_node); + mwifiex_insert_cmd_to_free_q(adapter, cmd_node); + return -1; + } + /* Set command sequence number */ adapter->seq_num++; host_cmd->seq_num = cpu_to_le16(HostCmd_SET_SEQ_NO_BSS_INFO @@ -168,9 +182,6 @@ static int mwifiex_dnld_cmd_to_fw(struct mwifiex_private *priv, adapter->curr_cmd = cmd_node; spin_unlock_irqrestore(&adapter->mwifiex_cmd_lock, flags); - cmd_code = le16_to_cpu(host_cmd->command); - cmd_size = le16_to_cpu(host_cmd->size); - /* Adjust skb length */ if (cmd_node->cmd_skb->len > cmd_size) /* -- cgit v1.2.3-70-g09d2 From 084c7189acb3f969c855536166042e27f5dd703f Mon Sep 17 00:00:00 2001 From: Bing Zhao Date: Fri, 15 Mar 2013 18:47:07 -0700 Subject: mwifiex: cancel cmd timer and free curr_cmd in shutdown process curr_cmd points to the command that is in processing or waiting for its command response from firmware. If the function shutdown happens to occur at this time we should cancel the cmd timer and put the command back to free queue. Cc: # 3.8 Tested-by: Marco Cesarano Signed-off-by: Bing Zhao Signed-off-by: John W. Linville --- drivers/net/wireless/mwifiex/init.c | 8 ++++++++ 1 file changed, 8 insertions(+) (limited to 'drivers/net') diff --git a/drivers/net/wireless/mwifiex/init.c b/drivers/net/wireless/mwifiex/init.c index e38aa9b3663..0ff4c37ab42 100644 --- a/drivers/net/wireless/mwifiex/init.c +++ b/drivers/net/wireless/mwifiex/init.c @@ -709,6 +709,14 @@ mwifiex_shutdown_drv(struct mwifiex_adapter *adapter) return ret; } + /* cancel current command */ + if (adapter->curr_cmd) { + dev_warn(adapter->dev, "curr_cmd is still in processing\n"); + del_timer(&adapter->cmd_timer); + mwifiex_insert_cmd_to_free_q(adapter, adapter->curr_cmd); + adapter->curr_cmd = NULL; + } + /* shut down mwifiex */ dev_dbg(adapter->dev, "info: shutdown mwifiex...\n"); -- cgit v1.2.3-70-g09d2 From 36ef0b473fbf43d5db23eea4616cc1d18cec245f Mon Sep 17 00:00:00 2001 From: Jussi Kivilinna Date: Sun, 17 Mar 2013 11:54:04 +0200 Subject: rtlwifi: usb: add missing freeing of skbuff Signed-off-by: Jussi Kivilinna Acked-by: Larry Finger Cc: stable@vger.kernel.org Signed-off-by: John W. Linville --- drivers/net/wireless/rtlwifi/usb.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers/net') diff --git a/drivers/net/wireless/rtlwifi/usb.c b/drivers/net/wireless/rtlwifi/usb.c index 156b52732f3..5847d6d0881 100644 --- a/drivers/net/wireless/rtlwifi/usb.c +++ b/drivers/net/wireless/rtlwifi/usb.c @@ -851,6 +851,7 @@ static void _rtl_usb_transmit(struct ieee80211_hw *hw, struct sk_buff *skb, if (unlikely(!_urb)) { RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG, "Can't allocate urb. Drop skb!\n"); + kfree_skb(skb); return; } _rtl_submit_tx_urb(hw, _urb); -- cgit v1.2.3-70-g09d2 From cc904c7188c29847817f35e6966fec3014c7479b Mon Sep 17 00:00:00 2001 From: Emmanuel Grumbach Date: Thu, 14 Mar 2013 08:35:06 +0200 Subject: iwlwifi: fix length check in multi-TB HCMD As reported by Ben Hutchings, there was a harmless issue in the checks being done on the lengths of the TBs while building the TFD for a multi-TB host command. Cc: stable@vger@kernel.org Signed-off-by: Emmanuel Grumbach Signed-off-by: Johannes Berg --- drivers/net/wireless/iwlwifi/pcie/tx.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/net') diff --git a/drivers/net/wireless/iwlwifi/pcie/tx.c b/drivers/net/wireless/iwlwifi/pcie/tx.c index 8595c16f74d..cb5c6792e3a 100644 --- a/drivers/net/wireless/iwlwifi/pcie/tx.c +++ b/drivers/net/wireless/iwlwifi/pcie/tx.c @@ -1264,7 +1264,7 @@ static int iwl_pcie_enqueue_hcmd(struct iwl_trans *trans, for (i = 0; i < IWL_MAX_CMD_TBS_PER_TFD; i++) { int copy = 0; - if (!cmd->len) + if (!cmd->len[i]) continue; /* need at least IWL_HCMD_SCRATCHBUF_SIZE copied */ -- cgit v1.2.3-70-g09d2 From 4620020b5d7ca34d1c03fa98b0ca457320cb7d71 Mon Sep 17 00:00:00 2001 From: Emmanuel Grumbach Date: Wed, 13 Mar 2013 16:38:32 +0200 Subject: iwlwifi: set rfkill in internal state of the transport We didn't update the internal of the PCIe transport when we read the RFkill state directly. Fix that. Signed-off-by: Emmanuel Grumbach Signed-off-by: Johannes Berg --- drivers/net/wireless/iwlwifi/pcie/trans.c | 13 +++++++++++++ 1 file changed, 13 insertions(+) (limited to 'drivers/net') diff --git a/drivers/net/wireless/iwlwifi/pcie/trans.c b/drivers/net/wireless/iwlwifi/pcie/trans.c index 17bedc50e75..12c4f31ca8f 100644 --- a/drivers/net/wireless/iwlwifi/pcie/trans.c +++ b/drivers/net/wireless/iwlwifi/pcie/trans.c @@ -475,6 +475,10 @@ static int iwl_trans_pcie_start_fw(struct iwl_trans *trans, /* If platform's RF_KILL switch is NOT set to KILL */ hw_rfkill = iwl_is_rfkill_set(trans); + if (hw_rfkill) + set_bit(STATUS_RFKILL, &trans_pcie->status); + else + clear_bit(STATUS_RFKILL, &trans_pcie->status); iwl_op_mode_hw_rf_kill(trans->op_mode, hw_rfkill); if (hw_rfkill && !run_in_rfkill) return -ERFKILL; @@ -641,6 +645,7 @@ static int iwl_trans_pcie_d3_resume(struct iwl_trans *trans, static int iwl_trans_pcie_start_hw(struct iwl_trans *trans) { + struct iwl_trans_pcie *trans_pcie = IWL_TRANS_GET_PCIE_TRANS(trans); bool hw_rfkill; int err; @@ -656,6 +661,10 @@ static int iwl_trans_pcie_start_hw(struct iwl_trans *trans) iwl_enable_rfkill_int(trans); hw_rfkill = iwl_is_rfkill_set(trans); + if (hw_rfkill) + set_bit(STATUS_RFKILL, &trans_pcie->status); + else + clear_bit(STATUS_RFKILL, &trans_pcie->status); iwl_op_mode_hw_rf_kill(trans->op_mode, hw_rfkill); return 0; @@ -694,6 +703,10 @@ static void iwl_trans_pcie_stop_hw(struct iwl_trans *trans, * op_mode. */ hw_rfkill = iwl_is_rfkill_set(trans); + if (hw_rfkill) + set_bit(STATUS_RFKILL, &trans_pcie->status); + else + clear_bit(STATUS_RFKILL, &trans_pcie->status); iwl_op_mode_hw_rf_kill(trans->op_mode, hw_rfkill); } } -- cgit v1.2.3-70-g09d2 From 2d5d50ee596361566f7f84300117cba7d7672bc5 Mon Sep 17 00:00:00 2001 From: Emmanuel Grumbach Date: Thu, 31 Jan 2013 15:03:55 +0200 Subject: iwlwifi: dvm: don't send HCMD in restart flow There is a race between the restart flow and the workers. The workers are cancelled after the fw is already killed and might send HCMD when there is fw to handle them. Simply check that there is a fw to which the HCMD can be sent before actually sending it. Cc: stable@vger.kernel.org Signed-off-by: Emmanuel Grumbach Signed-off-by: Johannes Berg --- drivers/net/wireless/iwlwifi/dvm/lib.c | 9 +++++++++ drivers/net/wireless/iwlwifi/dvm/ucode.c | 4 ++-- 2 files changed, 11 insertions(+), 2 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/wireless/iwlwifi/dvm/lib.c b/drivers/net/wireless/iwlwifi/dvm/lib.c index 86ea5f4c393..44ca0e57f9f 100644 --- a/drivers/net/wireless/iwlwifi/dvm/lib.c +++ b/drivers/net/wireless/iwlwifi/dvm/lib.c @@ -1261,6 +1261,15 @@ int iwl_dvm_send_cmd(struct iwl_priv *priv, struct iwl_host_cmd *cmd) return -EIO; } + /* + * This can happen upon FW ASSERT: we clear the STATUS_FW_ERROR flag + * in iwl_down but cancel the workers only later. + */ + if (!priv->ucode_loaded) { + IWL_ERR(priv, "Fw not loaded - dropping CMD: %x\n", cmd->id); + return -EIO; + } + /* * Synchronous commands from this op-mode must hold * the mutex, this ensures we don't try to send two diff --git a/drivers/net/wireless/iwlwifi/dvm/ucode.c b/drivers/net/wireless/iwlwifi/dvm/ucode.c index 736fe9bb140..1a4ac9236a4 100644 --- a/drivers/net/wireless/iwlwifi/dvm/ucode.c +++ b/drivers/net/wireless/iwlwifi/dvm/ucode.c @@ -367,6 +367,8 @@ int iwl_load_ucode_wait_alive(struct iwl_priv *priv, return -EIO; } + priv->ucode_loaded = true; + if (ucode_type != IWL_UCODE_WOWLAN) { /* delay a bit to give rfkill time to run */ msleep(5); @@ -380,8 +382,6 @@ int iwl_load_ucode_wait_alive(struct iwl_priv *priv, return ret; } - priv->ucode_loaded = true; - return 0; } -- cgit v1.2.3-70-g09d2 From 0582b7d15f8a7ae53dd2128b8eb01567b3fd2277 Mon Sep 17 00:00:00 2001 From: Sergei Shtylyov Date: Tue, 19 Mar 2013 13:40:23 +0000 Subject: sh_eth: fix bitbang memory leak sh_mdio_init() allocates pointer to 'struct bb_info' but only stores it locally, so that sh_mdio_release() can't free it on driver unload. Add the pointer to 'struct bb_info' to 'struct sh_eth_private', so that sh_mdio_init() can save 'bitbang' variable for sh_mdio_release() to be able to free it later... Signed-off-by: Sergei Shtylyov Signed-off-by: David S. Miller --- drivers/net/ethernet/renesas/sh_eth.c | 5 +++++ drivers/net/ethernet/renesas/sh_eth.h | 1 + 2 files changed, 6 insertions(+) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/renesas/sh_eth.c b/drivers/net/ethernet/renesas/sh_eth.c index 33e96176e4d..c87862812ea 100644 --- a/drivers/net/ethernet/renesas/sh_eth.c +++ b/drivers/net/ethernet/renesas/sh_eth.c @@ -2220,6 +2220,7 @@ static void sh_eth_tsu_init(struct sh_eth_private *mdp) /* MDIO bus release function */ static int sh_mdio_release(struct net_device *ndev) { + struct sh_eth_private *mdp = netdev_priv(ndev); struct mii_bus *bus = dev_get_drvdata(&ndev->dev); /* unregister mdio bus */ @@ -2234,6 +2235,9 @@ static int sh_mdio_release(struct net_device *ndev) /* free bitbang info */ free_mdio_bitbang(bus); + /* free bitbang memory */ + kfree(mdp->bitbang); + return 0; } @@ -2262,6 +2266,7 @@ static int sh_mdio_init(struct net_device *ndev, int id, bitbang->ctrl.ops = &bb_ops; /* MII controller setting */ + mdp->bitbang = bitbang; mdp->mii_bus = alloc_mdio_bitbang(&bitbang->ctrl); if (!mdp->mii_bus) { ret = -ENOMEM; diff --git a/drivers/net/ethernet/renesas/sh_eth.h b/drivers/net/ethernet/renesas/sh_eth.h index bae84fd2e73..e6655678458 100644 --- a/drivers/net/ethernet/renesas/sh_eth.h +++ b/drivers/net/ethernet/renesas/sh_eth.h @@ -705,6 +705,7 @@ struct sh_eth_private { const u16 *reg_offset; void __iomem *addr; void __iomem *tsu_addr; + struct bb_info *bitbang; u32 num_rx_ring; u32 num_tx_ring; dma_addr_t rx_desc_dma; -- cgit v1.2.3-70-g09d2 From fc0c0900408e05758a0df17c1924ca837fafca5e Mon Sep 17 00:00:00 2001 From: Sergei Shtylyov Date: Tue, 19 Mar 2013 13:41:32 +0000 Subject: sh_eth: check TSU registers ioremap() error One must check the result of ioremap() -- in this case it prevents potential kernel oops when initializing TSU registers further on... Signed-off-by: Sergei Shtylyov Signed-off-by: David S. Miller --- drivers/net/ethernet/renesas/sh_eth.c | 5 +++++ 1 file changed, 5 insertions(+) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/renesas/sh_eth.c b/drivers/net/ethernet/renesas/sh_eth.c index c87862812ea..bf5e3cf97c4 100644 --- a/drivers/net/ethernet/renesas/sh_eth.c +++ b/drivers/net/ethernet/renesas/sh_eth.c @@ -2446,6 +2446,11 @@ static int sh_eth_drv_probe(struct platform_device *pdev) } mdp->tsu_addr = ioremap(rtsu->start, resource_size(rtsu)); + if (mdp->tsu_addr == NULL) { + ret = -ENOMEM; + dev_err(&pdev->dev, "TSU ioremap failed.\n"); + goto out_release; + } mdp->port = devno % 2; ndev->features = NETIF_F_HW_VLAN_FILTER; } -- cgit v1.2.3-70-g09d2 From fa90b077d72b4ea92706e86fdff7b5dca294caa3 Mon Sep 17 00:00:00 2001 From: Wei Yongjun Date: Wed, 20 Mar 2013 02:21:48 +0000 Subject: lpc_eth: fix error return code in lpc_eth_drv_probe() Fix to return a negative error code from the error handling case instead of 0, as returned elsewhere in this function. Signed-off-by: Wei Yongjun Signed-off-by: David S. Miller --- drivers/net/ethernet/nxp/lpc_eth.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/nxp/lpc_eth.c b/drivers/net/ethernet/nxp/lpc_eth.c index c4122c86f82..efa29b712d5 100644 --- a/drivers/net/ethernet/nxp/lpc_eth.c +++ b/drivers/net/ethernet/nxp/lpc_eth.c @@ -1472,7 +1472,8 @@ static int lpc_eth_drv_probe(struct platform_device *pdev) } platform_set_drvdata(pdev, ndev); - if (lpc_mii_init(pldat) != 0) + ret = lpc_mii_init(pldat); + if (ret) goto err_out_unregister_netdev; netdev_info(ndev, "LPC mac at 0x%08x irq %d\n", -- cgit v1.2.3-70-g09d2 From da2191e31409d1058dcbed44e8f53e39a40e86b3 Mon Sep 17 00:00:00 2001 From: Fabio Estevam Date: Wed, 20 Mar 2013 12:31:07 -0300 Subject: net: fec: Define indexes as 'unsigned int' Fix the following warnings that happen when building with W=1 option: drivers/net/ethernet/freescale/fec.c: In function 'fec_enet_free_buffers': drivers/net/ethernet/freescale/fec.c:1337:16: warning: comparison between signed and unsigned integer expressions [-Wsign-compare] drivers/net/ethernet/freescale/fec.c: In function 'fec_enet_alloc_buffers': drivers/net/ethernet/freescale/fec.c:1361:16: warning: comparison between signed and unsigned integer expressions [-Wsign-compare] drivers/net/ethernet/freescale/fec.c: In function 'fec_enet_init': drivers/net/ethernet/freescale/fec.c:1631:16: warning: comparison between signed and unsigned integer expressions [-Wsign-compare] Signed-off-by: Fabio Estevam Signed-off-by: David S. Miller --- drivers/net/ethernet/freescale/fec.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/freescale/fec.c b/drivers/net/ethernet/freescale/fec.c index e3f39372ce2..911d0253dbb 100644 --- a/drivers/net/ethernet/freescale/fec.c +++ b/drivers/net/ethernet/freescale/fec.c @@ -1332,7 +1332,7 @@ static int fec_enet_ioctl(struct net_device *ndev, struct ifreq *rq, int cmd) static void fec_enet_free_buffers(struct net_device *ndev) { struct fec_enet_private *fep = netdev_priv(ndev); - int i; + unsigned int i; struct sk_buff *skb; struct bufdesc *bdp; @@ -1356,7 +1356,7 @@ static void fec_enet_free_buffers(struct net_device *ndev) static int fec_enet_alloc_buffers(struct net_device *ndev) { struct fec_enet_private *fep = netdev_priv(ndev); - int i; + unsigned int i; struct sk_buff *skb; struct bufdesc *bdp; @@ -1598,7 +1598,7 @@ static int fec_enet_init(struct net_device *ndev) struct fec_enet_private *fep = netdev_priv(ndev); struct bufdesc *cbd_base; struct bufdesc *bdp; - int i; + unsigned int i; /* Allocate memory for buffer descriptors. */ cbd_base = dma_alloc_coherent(NULL, PAGE_SIZE, &fep->bd_dma, -- cgit v1.2.3-70-g09d2 From 9d73adf431e093b23fb4990f1ade11283cb67a98 Mon Sep 17 00:00:00 2001 From: Fabio Estevam Date: Wed, 20 Mar 2013 08:19:32 +0000 Subject: fec: Fix the build as module Since commit ff43da86c69 (NET: FEC: dynamtic check DMA desc buff type) the following build error happens when CONFIG_FEC=m ERROR: "fec_ptp_init" [drivers/net/ethernet/freescale/fec.ko] undefined! ERROR: "fec_ptp_ioctl" [drivers/net/ethernet/freescale/fec.ko] undefined! ERROR: "fec_ptp_start_cyclecounter" [drivers/net/ethernet/freescale/fec.ko] undefined! Fix it by exporting the required fec_ptp symbols. Reported-by: Uwe Kleine-Koenig Signed-off-by: Fabio Estevam Signed-off-by: David S. Miller --- drivers/net/ethernet/freescale/fec_ptp.c | 3 +++ 1 file changed, 3 insertions(+) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/freescale/fec_ptp.c b/drivers/net/ethernet/freescale/fec_ptp.c index 1f17ca0f220..0d8df400a47 100644 --- a/drivers/net/ethernet/freescale/fec_ptp.c +++ b/drivers/net/ethernet/freescale/fec_ptp.c @@ -128,6 +128,7 @@ void fec_ptp_start_cyclecounter(struct net_device *ndev) spin_unlock_irqrestore(&fep->tmreg_lock, flags); } +EXPORT_SYMBOL(fec_ptp_start_cyclecounter); /** * fec_ptp_adjfreq - adjust ptp cycle frequency @@ -318,6 +319,7 @@ int fec_ptp_ioctl(struct net_device *ndev, struct ifreq *ifr, int cmd) return copy_to_user(ifr->ifr_data, &config, sizeof(config)) ? -EFAULT : 0; } +EXPORT_SYMBOL(fec_ptp_ioctl); /** * fec_time_keep - call timecounter_read every second to avoid timer overrun @@ -383,3 +385,4 @@ void fec_ptp_init(struct net_device *ndev, struct platform_device *pdev) pr_info("registered PHC device on %s\n", ndev->name); } } +EXPORT_SYMBOL(fec_ptp_init); -- cgit v1.2.3-70-g09d2 From cb0e51d80694fc9964436be1a1a15275e991cb1e Mon Sep 17 00:00:00 2001 From: Wei Yongjun Date: Wed, 20 Mar 2013 21:31:42 +0000 Subject: lantiq_etop: use free_netdev(netdev) instead of kfree() Freeing netdev without free_netdev() leads to net, tx leaks. And it may lead to dereferencing freed pointer. Signed-off-by: Wei Yongjun Signed-off-by: David S. Miller --- drivers/net/ethernet/lantiq_etop.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/lantiq_etop.c b/drivers/net/ethernet/lantiq_etop.c index 6a2127489af..bfdb0686039 100644 --- a/drivers/net/ethernet/lantiq_etop.c +++ b/drivers/net/ethernet/lantiq_etop.c @@ -769,7 +769,7 @@ ltq_etop_probe(struct platform_device *pdev) return 0; err_free: - kfree(dev); + free_netdev(dev); err_out: return err; } -- cgit v1.2.3-70-g09d2 From ce16294fda230c787ce5c35f61b2f80d14d70a72 Mon Sep 17 00:00:00 2001 From: Lothar Waßmann Date: Thu, 21 Mar 2013 02:20:11 +0000 Subject: net: ethernet: cpsw: fix erroneous condition in error check MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The error check in cpsw_probe_dt() has an '&&' where an '||' is meant to be. This causes a NULL pointer dereference when incomplet DT data is passed to the driver ('phy_id' property for cpsw_emac1 missing). Signed-off-by: Lothar Waßmann Signed-off-by: David S. Miller --- drivers/net/ethernet/ti/cpsw.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/ti/cpsw.c b/drivers/net/ethernet/ti/cpsw.c index 75c48558e6f..df32a090d08 100644 --- a/drivers/net/ethernet/ti/cpsw.c +++ b/drivers/net/ethernet/ti/cpsw.c @@ -1364,7 +1364,7 @@ static int cpsw_probe_dt(struct cpsw_platform_data *data, struct platform_device *mdio; parp = of_get_property(slave_node, "phy_id", &lenp); - if ((parp == NULL) && (lenp != (sizeof(void *) * 2))) { + if ((parp == NULL) || (lenp != (sizeof(void *) * 2))) { pr_err("Missing slave[%d] phy_id property\n", i); ret = -EINVAL; goto error_ret; -- cgit v1.2.3-70-g09d2 From c101c81b5293cdcb616ed4948d0c4a4cfd1f481a Mon Sep 17 00:00:00 2001 From: Moshe Lazer Date: Thu, 21 Mar 2013 05:55:51 +0000 Subject: net/mlx4_core: Fix wrong mask applied on EQ numbers in the wrapper Currently the mask is wrongly set in the MAP_EQ wrapper, fix that. Without the fix any EQ number above 511 is mapped to one below 511. Signed-off-by: Moshe Lazer Signed-off-by: Or Gerlitz Signed-off-by: David S. Miller --- drivers/net/ethernet/mellanox/mlx4/eq.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/mellanox/mlx4/eq.c b/drivers/net/ethernet/mellanox/mlx4/eq.c index 251ae2f9311..8e3123a1df8 100644 --- a/drivers/net/ethernet/mellanox/mlx4/eq.c +++ b/drivers/net/ethernet/mellanox/mlx4/eq.c @@ -771,7 +771,7 @@ int mlx4_MAP_EQ_wrapper(struct mlx4_dev *dev, int slave, struct mlx4_slave_event_eq_info *event_eq = priv->mfunc.master.slave_state[slave].event_eq; u32 in_modifier = vhcr->in_modifier; - u32 eqn = in_modifier & 0x1FF; + u32 eqn = in_modifier & 0x3FF; u64 in_param = vhcr->in_param; int err = 0; int i; -- cgit v1.2.3-70-g09d2 From 80cb0021163cb55b14c7c054073f89d63a2e1e40 Mon Sep 17 00:00:00 2001 From: Hadar Hen Zion Date: Thu, 21 Mar 2013 05:55:52 +0000 Subject: net/mlx4_core: Fix wrong order of flow steering resources removal On the resource tracker cleanup flow, the DMFS rules must be deleted before we destroy the QPs, else the HW may attempt doing packet steering to non existent QPs. Signed-off-by: Hadar Hen Zion Signed-off-by: Or Gerlitz Signed-off-by: David S. Miller --- drivers/net/ethernet/mellanox/mlx4/resource_tracker.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/mellanox/mlx4/resource_tracker.c b/drivers/net/ethernet/mellanox/mlx4/resource_tracker.c index 2995687f1ae..0d1d9679179 100644 --- a/drivers/net/ethernet/mellanox/mlx4/resource_tracker.c +++ b/drivers/net/ethernet/mellanox/mlx4/resource_tracker.c @@ -3806,6 +3806,7 @@ void mlx4_delete_all_resources_for_slave(struct mlx4_dev *dev, int slave) mutex_lock(&priv->mfunc.master.res_tracker.slave_list[slave].mutex); /*VLAN*/ rem_slave_macs(dev, slave); + rem_slave_fs_rule(dev, slave); rem_slave_qps(dev, slave); rem_slave_srqs(dev, slave); rem_slave_cqs(dev, slave); @@ -3814,6 +3815,5 @@ void mlx4_delete_all_resources_for_slave(struct mlx4_dev *dev, int slave) rem_slave_mtts(dev, slave); rem_slave_counters(dev, slave); rem_slave_xrcdns(dev, slave); - rem_slave_fs_rule(dev, slave); mutex_unlock(&priv->mfunc.master.res_tracker.slave_list[slave].mutex); } -- cgit v1.2.3-70-g09d2 From 6efb5fac4d6b617972ab5a10bf67e0eba2c2d212 Mon Sep 17 00:00:00 2001 From: Hadar Hen Zion Date: Thu, 21 Mar 2013 05:55:53 +0000 Subject: net/mlx4_en: Remove ethtool flow steering rules before releasing QPs Fix the ethtool flow steering rules cleanup to be carried out before releasing the RX QPs. Signed-off-by: Hadar Hen Zion Signed-off-by: Or Gerlitz Signed-off-by: David S. Miller --- drivers/net/ethernet/mellanox/mlx4/en_netdev.c | 22 +++++++++++----------- 1 file changed, 11 insertions(+), 11 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/mellanox/mlx4/en_netdev.c b/drivers/net/ethernet/mellanox/mlx4/en_netdev.c index 995d4b6d5c1..f278b10ef71 100644 --- a/drivers/net/ethernet/mellanox/mlx4/en_netdev.c +++ b/drivers/net/ethernet/mellanox/mlx4/en_netdev.c @@ -1637,6 +1637,17 @@ void mlx4_en_stop_port(struct net_device *dev, int detach) /* Flush multicast filter */ mlx4_SET_MCAST_FLTR(mdev->dev, priv->port, 0, 1, MLX4_MCAST_CONFIG); + /* Remove flow steering rules for the port*/ + if (mdev->dev->caps.steering_mode == + MLX4_STEERING_MODE_DEVICE_MANAGED) { + ASSERT_RTNL(); + list_for_each_entry_safe(flow, tmp_flow, + &priv->ethtool_list, list) { + mlx4_flow_detach(mdev->dev, flow->id); + list_del(&flow->list); + } + } + mlx4_en_destroy_drop_qp(priv); /* Free TX Rings */ @@ -1657,17 +1668,6 @@ void mlx4_en_stop_port(struct net_device *dev, int detach) if (!(mdev->dev->caps.flags2 & MLX4_DEV_CAP_FLAGS2_REASSIGN_MAC_EN)) mdev->mac_removed[priv->port] = 1; - /* Remove flow steering rules for the port*/ - if (mdev->dev->caps.steering_mode == - MLX4_STEERING_MODE_DEVICE_MANAGED) { - ASSERT_RTNL(); - list_for_each_entry_safe(flow, tmp_flow, - &priv->ethtool_list, list) { - mlx4_flow_detach(mdev->dev, flow->id); - list_del(&flow->list); - } - } - /* Free RX Rings */ for (i = 0; i < priv->rx_ring_num; i++) { mlx4_en_deactivate_rx_ring(priv, &priv->rx_ring[i]); -- cgit v1.2.3-70-g09d2 From 1e3f7b324e46b772dec1bb6dd96ae745fc085401 Mon Sep 17 00:00:00 2001 From: Hadar Hen Zion Date: Thu, 21 Mar 2013 05:55:54 +0000 Subject: net/mlx4_core: Always use 64 bit resource ID when doing lookup One of the resource tracker code paths was wrongly using int and not u64 for resource tracking IDs, fix it. Signed-off-by: Hadar Hen Zion Signed-off-by: Or Gerlitz Signed-off-by: David S. Miller --- drivers/net/ethernet/mellanox/mlx4/resource_tracker.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/mellanox/mlx4/resource_tracker.c b/drivers/net/ethernet/mellanox/mlx4/resource_tracker.c index 0d1d9679179..b0ccdb55ca4 100644 --- a/drivers/net/ethernet/mellanox/mlx4/resource_tracker.c +++ b/drivers/net/ethernet/mellanox/mlx4/resource_tracker.c @@ -355,7 +355,7 @@ static int mpt_mask(struct mlx4_dev *dev) return dev->caps.num_mpts - 1; } -static void *find_res(struct mlx4_dev *dev, int res_id, +static void *find_res(struct mlx4_dev *dev, u64 res_id, enum mlx4_resource type) { struct mlx4_priv *priv = mlx4_priv(dev); -- cgit v1.2.3-70-g09d2 From 2c473ae7e5826c108e52f4a9d75425fd4c6f9ed1 Mon Sep 17 00:00:00 2001 From: Hadar Hen Zion Date: Thu, 21 Mar 2013 05:55:55 +0000 Subject: net/mlx4_core: Disallow releasing VF QPs which have steering rules VF QPs must not be released when they have steering rules attached to them. For that end, introduce a reference count field to the QP object in the SRIOV resource tracker which is incremented/decremented when steering rules are attached/detached to it. QPs can be released by VF only when their ref count is zero. Signed-off-by: Hadar Hen Zion Signed-off-by: Or Gerlitz Signed-off-by: David S. Miller --- .../net/ethernet/mellanox/mlx4/resource_tracker.c | 41 +++++++++++++++++----- 1 file changed, 33 insertions(+), 8 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/mellanox/mlx4/resource_tracker.c b/drivers/net/ethernet/mellanox/mlx4/resource_tracker.c index b0ccdb55ca4..1391b52f443 100644 --- a/drivers/net/ethernet/mellanox/mlx4/resource_tracker.c +++ b/drivers/net/ethernet/mellanox/mlx4/resource_tracker.c @@ -99,6 +99,7 @@ struct res_qp { struct list_head mcg_list; spinlock_t mcg_spl; int local_qpn; + atomic_t ref_count; }; enum res_mtt_states { @@ -197,6 +198,7 @@ enum res_fs_rule_states { struct res_fs_rule { struct res_common com; + int qpn; }; static void *res_tracker_lookup(struct rb_root *root, u64 res_id) @@ -447,6 +449,7 @@ static struct res_common *alloc_qp_tr(int id) ret->local_qpn = id; INIT_LIST_HEAD(&ret->mcg_list); spin_lock_init(&ret->mcg_spl); + atomic_set(&ret->ref_count, 0); return &ret->com; } @@ -554,7 +557,7 @@ static struct res_common *alloc_xrcdn_tr(int id) return &ret->com; } -static struct res_common *alloc_fs_rule_tr(u64 id) +static struct res_common *alloc_fs_rule_tr(u64 id, int qpn) { struct res_fs_rule *ret; @@ -564,7 +567,7 @@ static struct res_common *alloc_fs_rule_tr(u64 id) ret->com.res_id = id; ret->com.state = RES_FS_RULE_ALLOCATED; - + ret->qpn = qpn; return &ret->com; } @@ -602,7 +605,7 @@ static struct res_common *alloc_tr(u64 id, enum mlx4_resource type, int slave, ret = alloc_xrcdn_tr(id); break; case RES_FS_RULE: - ret = alloc_fs_rule_tr(id); + ret = alloc_fs_rule_tr(id, extra); break; default: return NULL; @@ -671,10 +674,14 @@ undo: static int remove_qp_ok(struct res_qp *res) { - if (res->com.state == RES_QP_BUSY) + if (res->com.state == RES_QP_BUSY || atomic_read(&res->ref_count) || + !list_empty(&res->mcg_list)) { + pr_err("resource tracker: fail to remove qp, state %d, ref_count %d\n", + res->com.state, atomic_read(&res->ref_count)); return -EBUSY; - else if (res->com.state != RES_QP_RESERVED) + } else if (res->com.state != RES_QP_RESERVED) { return -EPERM; + } return 0; } @@ -3124,6 +3131,7 @@ int mlx4_QP_FLOW_STEERING_ATTACH_wrapper(struct mlx4_dev *dev, int slave, struct list_head *rlist = &tracker->slave_list[slave].res_list[RES_MAC]; int err; int qpn; + struct res_qp *rqp; struct mlx4_net_trans_rule_hw_ctrl *ctrl; struct _rule_hw *rule_header; int header_id; @@ -3134,7 +3142,7 @@ int mlx4_QP_FLOW_STEERING_ATTACH_wrapper(struct mlx4_dev *dev, int slave, ctrl = (struct mlx4_net_trans_rule_hw_ctrl *)inbox->buf; qpn = be32_to_cpu(ctrl->qpn) & 0xffffff; - err = get_res(dev, slave, qpn, RES_QP, NULL); + err = get_res(dev, slave, qpn, RES_QP, &rqp); if (err) { pr_err("Steering rule with qpn 0x%x rejected.\n", qpn); return err; @@ -3175,14 +3183,16 @@ int mlx4_QP_FLOW_STEERING_ATTACH_wrapper(struct mlx4_dev *dev, int slave, if (err) goto err_put; - err = add_res_range(dev, slave, vhcr->out_param, 1, RES_FS_RULE, 0); + err = add_res_range(dev, slave, vhcr->out_param, 1, RES_FS_RULE, qpn); if (err) { mlx4_err(dev, "Fail to add flow steering resources.\n "); /* detach rule*/ mlx4_cmd(dev, vhcr->out_param, 0, 0, MLX4_QP_FLOW_STEERING_DETACH, MLX4_CMD_TIME_CLASS_A, MLX4_CMD_NATIVE); + goto err_put; } + atomic_inc(&rqp->ref_count); err_put: put_res(dev, slave, qpn, RES_QP); return err; @@ -3195,20 +3205,35 @@ int mlx4_QP_FLOW_STEERING_DETACH_wrapper(struct mlx4_dev *dev, int slave, struct mlx4_cmd_info *cmd) { int err; + struct res_qp *rqp; + struct res_fs_rule *rrule; if (dev->caps.steering_mode != MLX4_STEERING_MODE_DEVICE_MANAGED) return -EOPNOTSUPP; + err = get_res(dev, slave, vhcr->in_param, RES_FS_RULE, &rrule); + if (err) + return err; + /* Release the rule form busy state before removal */ + put_res(dev, slave, vhcr->in_param, RES_FS_RULE); + err = get_res(dev, slave, rrule->qpn, RES_QP, &rqp); + if (err) + return err; + err = rem_res_range(dev, slave, vhcr->in_param, 1, RES_FS_RULE, 0); if (err) { mlx4_err(dev, "Fail to remove flow steering resources.\n "); - return err; + goto out; } err = mlx4_cmd(dev, vhcr->in_param, 0, 0, MLX4_QP_FLOW_STEERING_DETACH, MLX4_CMD_TIME_CLASS_A, MLX4_CMD_NATIVE); + if (!err) + atomic_dec(&rqp->ref_count); +out: + put_res(dev, slave, rrule->qpn, RES_QP); return err; } -- cgit v1.2.3-70-g09d2 From 8fe7f99a9e11a43183bc27420309ae105e1fec1a Mon Sep 17 00:00:00 2001 From: Kumar Amit Mehta Date: Sat, 23 Mar 2013 20:10:25 +0000 Subject: bnx2x: fix assignment of signed expression to unsigned variable fix for incorrect assignment of signed expression to unsigned variable. Signed-off-by: Kumar Amit Mehta Acked-by: Dmitry Kravkov Signed-off-by: David S. Miller --- drivers/net/ethernet/broadcom/bnx2x/bnx2x_dcb.c | 18 +++++++++--------- 1 file changed, 9 insertions(+), 9 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_dcb.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_dcb.c index 568205436a1..91ecd6a00d0 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_dcb.c +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_dcb.c @@ -2139,12 +2139,12 @@ static u8 bnx2x_dcbnl_get_cap(struct net_device *netdev, int capid, u8 *cap) break; default: BNX2X_ERR("Non valid capability ID\n"); - rval = -EINVAL; + rval = 1; break; } } else { DP(BNX2X_MSG_DCB, "DCB disabled\n"); - rval = -EINVAL; + rval = 1; } DP(BNX2X_MSG_DCB, "capid %d:%x\n", capid, *cap); @@ -2170,12 +2170,12 @@ static int bnx2x_dcbnl_get_numtcs(struct net_device *netdev, int tcid, u8 *num) break; default: BNX2X_ERR("Non valid TC-ID\n"); - rval = -EINVAL; + rval = 1; break; } } else { DP(BNX2X_MSG_DCB, "DCB disabled\n"); - rval = -EINVAL; + rval = 1; } return rval; @@ -2188,7 +2188,7 @@ static int bnx2x_dcbnl_set_numtcs(struct net_device *netdev, int tcid, u8 num) return -EINVAL; } -static u8 bnx2x_dcbnl_get_pfc_state(struct net_device *netdev) +static u8 bnx2x_dcbnl_get_pfc_state(struct net_device *netdev) { struct bnx2x *bp = netdev_priv(netdev); DP(BNX2X_MSG_DCB, "state = %d\n", bp->dcbx_local_feat.pfc.enabled); @@ -2390,12 +2390,12 @@ static u8 bnx2x_dcbnl_get_featcfg(struct net_device *netdev, int featid, break; default: BNX2X_ERR("Non valid featrue-ID\n"); - rval = -EINVAL; + rval = 1; break; } } else { DP(BNX2X_MSG_DCB, "DCB disabled\n"); - rval = -EINVAL; + rval = 1; } return rval; @@ -2431,12 +2431,12 @@ static u8 bnx2x_dcbnl_set_featcfg(struct net_device *netdev, int featid, break; default: BNX2X_ERR("Non valid featrue-ID\n"); - rval = -EINVAL; + rval = 1; break; } } else { DP(BNX2X_MSG_DCB, "dcbnl call not valid\n"); - rval = -EINVAL; + rval = 1; } return rval; -- cgit v1.2.3-70-g09d2 From 0f49d64c95944f5701216e900b89aab749edcda2 Mon Sep 17 00:00:00 2001 From: Avinash Patil Date: Wed, 20 Mar 2013 17:56:23 -0700 Subject: mwifiex: reset skb->data after processing PCIe sleep confirm cmd respose This patch is a bug fix for an issue wherein power save was not working for PCIe. This happens because for processing power save sleep confirm command we pull skb so that skb->data points ahead of interface header. We use same skb to get other cmda responses as well. So if we don't push skb after processing cmd response, it results into reduction in skb->len and finally skb->len reaches zero. This causes failure in processing sleep command response. Fix this by pushing skb by INTF_HEADER_LEN at the end of command response processing. Signed-off-by: Avinash Patil Signed-off-by: Bing Zhao Signed-off-by: John W. Linville --- drivers/net/wireless/mwifiex/pcie.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers/net') diff --git a/drivers/net/wireless/mwifiex/pcie.c b/drivers/net/wireless/mwifiex/pcie.c index 5c395e2e6a2..feb20461339 100644 --- a/drivers/net/wireless/mwifiex/pcie.c +++ b/drivers/net/wireless/mwifiex/pcie.c @@ -1508,6 +1508,7 @@ static int mwifiex_pcie_process_cmd_complete(struct mwifiex_adapter *adapter) } memcpy(adapter->upld_buf, skb->data, min_t(u32, MWIFIEX_SIZE_OF_CMD_BUFFER, skb->len)); + skb_push(skb, INTF_HEADER_LEN); if (mwifiex_map_pci_memory(adapter, skb, MWIFIEX_UPLD_SIZE, PCI_DMA_FROMDEVICE)) return -1; -- cgit v1.2.3-70-g09d2 From a1f6c6b147cc5e83ec36dab8370bd5ec5fa1def6 Mon Sep 17 00:00:00 2001 From: xunleer Date: Tue, 5 Mar 2013 07:44:20 +0000 Subject: ixgbevf: don't release the soft entries When the ixgbevf driver is opened the request to allocate MSIX irq vectors may fail. In that case the driver will call ixgbevf_down() which will call ixgbevf_irq_disable() to clear the HW interrupt registers and calls synchronize_irq() using the msix_entries pointer in the adapter structure. However, when the function to request the MSIX irq vectors failed it had already freed the msix_entries which causes an OOPs from using the NULL pointer in synchronize_irq(). The calls to pci_disable_msix() and to free the msix_entries memory should not occur if device open fails. Instead they should be called during device driver removal to balance with the call to pci_enable_msix() and the call to allocate msix_entries memory during the device probe and driver load. Signed-off-by: Li Xun Signed-off-by: Greg Rose Tested-by: Sibai Li Signed-off-by: Jeff Kirsher --- drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c | 24 +++++++++++++++++++---- 1 file changed, 20 insertions(+), 4 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c b/drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c index c3db6cd69b6..2b6cb5ca48e 100644 --- a/drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c +++ b/drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c @@ -944,9 +944,17 @@ free_queue_irqs: free_irq(adapter->msix_entries[vector].vector, adapter->q_vector[vector]); } - pci_disable_msix(adapter->pdev); - kfree(adapter->msix_entries); - adapter->msix_entries = NULL; + /* This failure is non-recoverable - it indicates the system is + * out of MSIX vector resources and the VF driver cannot run + * without them. Set the number of msix vectors to zero + * indicating that not enough can be allocated. The error + * will be returned to the user indicating device open failed. + * Any further attempts to force the driver to open will also + * fail. The only way to recover is to unload the driver and + * reload it again. If the system has recovered some MSIX + * vectors then it may succeed. + */ + adapter->num_msix_vectors = 0; return err; } @@ -2572,6 +2580,15 @@ static int ixgbevf_open(struct net_device *netdev) struct ixgbe_hw *hw = &adapter->hw; int err; + /* A previous failure to open the device because of a lack of + * available MSIX vector resources may have reset the number + * of msix vectors variable to zero. The only way to recover + * is to unload/reload the driver and hope that the system has + * been able to recover some MSIX vector resources. + */ + if (!adapter->num_msix_vectors) + return -ENOMEM; + /* disallow open during test */ if (test_bit(__IXGBEVF_TESTING, &adapter->state)) return -EBUSY; @@ -2628,7 +2645,6 @@ static int ixgbevf_open(struct net_device *netdev) err_req_irq: ixgbevf_down(adapter); - ixgbevf_free_irq(adapter); err_setup_rx: ixgbevf_free_all_rx_resources(adapter); err_setup_tx: -- cgit v1.2.3-70-g09d2 From 22c12752d183f39aa8e2cc884cfcb23c0cb6d98d Mon Sep 17 00:00:00 2001 From: Lior Levy Date: Tue, 12 Mar 2013 15:49:32 +0000 Subject: igb: fix i350 anti spoofing config Fix a problem in i350 where anti spoofing configuration was written into a wrong register. Signed-off-by: Lior Levy Tested-by: Aaron Brown Signed-off-by: Jeff Kirsher --- drivers/net/ethernet/intel/igb/e1000_82575.c | 33 ++++++++++++++++------------ 1 file changed, 19 insertions(+), 14 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/intel/igb/e1000_82575.c b/drivers/net/ethernet/intel/igb/e1000_82575.c index b64542acfa3..12b1d848080 100644 --- a/drivers/net/ethernet/intel/igb/e1000_82575.c +++ b/drivers/net/ethernet/intel/igb/e1000_82575.c @@ -1818,27 +1818,32 @@ out: **/ void igb_vmdq_set_anti_spoofing_pf(struct e1000_hw *hw, bool enable, int pf) { - u32 dtxswc; + u32 reg_val, reg_offset; switch (hw->mac.type) { case e1000_82576: + reg_offset = E1000_DTXSWC; + break; case e1000_i350: - dtxswc = rd32(E1000_DTXSWC); - if (enable) { - dtxswc |= (E1000_DTXSWC_MAC_SPOOF_MASK | - E1000_DTXSWC_VLAN_SPOOF_MASK); - /* The PF can spoof - it has to in order to - * support emulation mode NICs */ - dtxswc ^= (1 << pf | 1 << (pf + MAX_NUM_VFS)); - } else { - dtxswc &= ~(E1000_DTXSWC_MAC_SPOOF_MASK | - E1000_DTXSWC_VLAN_SPOOF_MASK); - } - wr32(E1000_DTXSWC, dtxswc); + reg_offset = E1000_TXSWC; break; default: - break; + return; + } + + reg_val = rd32(reg_offset); + if (enable) { + reg_val |= (E1000_DTXSWC_MAC_SPOOF_MASK | + E1000_DTXSWC_VLAN_SPOOF_MASK); + /* The PF can spoof - it has to in order to + * support emulation mode NICs + */ + reg_val ^= (1 << pf | 1 << (pf + MAX_NUM_VFS)); + } else { + reg_val &= ~(E1000_DTXSWC_MAC_SPOOF_MASK | + E1000_DTXSWC_VLAN_SPOOF_MASK); } + wr32(reg_offset, reg_val); } /** -- cgit v1.2.3-70-g09d2 From d0f63acc2ff354a525f7bc7ba90e81f49b6c2ef8 Mon Sep 17 00:00:00 2001 From: Alex Williamson Date: Wed, 13 Mar 2013 15:50:24 +0000 Subject: igb: Fix null pointer dereference The max_vfs= option has always been self limiting to the number of VFs supported by the device. fa44f2f1 added SR-IOV configuration via sysfs, but in the process broke this self correction factor. The failing path is: igb_probe igb_sw_init if (max_vfs > 7) { adapter->vfs_allocated_count = 7; ... igb_probe_vfs igb_enable_sriov(, max_vfs) if (num_vfs > 7) { err = -EPERM; ... This leaves vfs_allocated_count = 7 and vf_data = NULL, so we bomb out when igb_probe finally calls igb_reset. It seems like a really bad idea, and somewhat pointless, to set vfs_allocated_count separate from vf_data, but limiting max_vfs is enough to avoid the null pointer. Signed-off-by: Alex Williamson Acked-by: Greg Rose Tested-by: Aaron Brown Signed-off-by: Jeff Kirsher --- drivers/net/ethernet/intel/igb/igb_main.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/intel/igb/igb_main.c b/drivers/net/ethernet/intel/igb/igb_main.c index 4dbd62968c7..2ae888678b2 100644 --- a/drivers/net/ethernet/intel/igb/igb_main.c +++ b/drivers/net/ethernet/intel/igb/igb_main.c @@ -2652,7 +2652,7 @@ static int igb_sw_init(struct igb_adapter *adapter) if (max_vfs > 7) { dev_warn(&pdev->dev, "Maximum of 7 VFs per PF, using max\n"); - adapter->vfs_allocated_count = 7; + max_vfs = adapter->vfs_allocated_count = 7; } else adapter->vfs_allocated_count = max_vfs; if (adapter->vfs_allocated_count) -- cgit v1.2.3-70-g09d2 From d5e51a10d21761faaf069cac6f1c0311cf332820 Mon Sep 17 00:00:00 2001 From: Alex Williamson Date: Wed, 13 Mar 2013 15:50:29 +0000 Subject: igb: SR-IOV init reordering igb is ineffective at setting a lower total VFs because: int pci_sriov_set_totalvfs(struct pci_dev *dev, u16 numvfs) { ... /* Shouldn't change if VFs already enabled */ if (dev->sriov->ctrl & PCI_SRIOV_CTRL_VFE) return -EBUSY; Swap init ordering. Signed-off-by: Alex Williamson Acked-by: Greg Rose Tested-by: Aaron Brown Signed-off-by: Jeff Kirsher --- drivers/net/ethernet/intel/igb/igb_main.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/intel/igb/igb_main.c b/drivers/net/ethernet/intel/igb/igb_main.c index 2ae888678b2..8496adfc6a6 100644 --- a/drivers/net/ethernet/intel/igb/igb_main.c +++ b/drivers/net/ethernet/intel/igb/igb_main.c @@ -2542,8 +2542,8 @@ static void igb_probe_vfs(struct igb_adapter *adapter) if ((hw->mac.type == e1000_i210) || (hw->mac.type == e1000_i211)) return; - igb_enable_sriov(pdev, max_vfs); pci_sriov_set_totalvfs(pdev, 7); + igb_enable_sriov(pdev, max_vfs); #endif /* CONFIG_PCI_IOV */ } -- cgit v1.2.3-70-g09d2 From 05ec29e8fa9b6ec8d4ad5d2f6d5fc5467c7970bc Mon Sep 17 00:00:00 2001 From: Stephen Hemminger Date: Wed, 20 Mar 2013 09:06:29 +0000 Subject: igb: make sensor info static Trivial sparse warning. Signed-off-by: Stephen Hemminger Tested-by: Aaron Brown Signed-off-by: Jeff Kirsher --- drivers/net/ethernet/intel/igb/igb_hwmon.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/intel/igb/igb_hwmon.c b/drivers/net/ethernet/intel/igb/igb_hwmon.c index 4623502054d..0478a1abe54 100644 --- a/drivers/net/ethernet/intel/igb/igb_hwmon.c +++ b/drivers/net/ethernet/intel/igb/igb_hwmon.c @@ -39,7 +39,7 @@ #include #ifdef CONFIG_IGB_HWMON -struct i2c_board_info i350_sensor_info = { +static struct i2c_board_info i350_sensor_info = { I2C_BOARD_INFO("i350bb", (0Xf8 >> 1)), }; -- cgit v1.2.3-70-g09d2 From 75517d92119a3cd364f618ee962055b3ded8c396 Mon Sep 17 00:00:00 2001 From: Jiri Benc Date: Wed, 20 Mar 2013 09:06:34 +0000 Subject: igb: fix PHC stopping on max freq For 82576 MAC type, max_adj is reported as 1000000000 ppb. However, if this value is passed to igb_ptp_adjfreq_82576, incvalue overflows out of INCVALUE_82576_MASK, resulting in setting of zero TIMINCA.incvalue, stopping the PHC (instead of going at twice the nominal speed). Fix the advertised max_adj value to the largest value hardware can handle. As there is no min_adj value available (-max_adj is used instead), this will also prevent stopping the clock intentionally. It's probably not a big deal, other igb MAC types don't support stopping the clock, either. Signed-off-by: Jiri Benc Acked-by: Matthew Vick Tested-by: Aaron Brown Signed-off-by: Jeff Kirsher --- drivers/net/ethernet/intel/igb/igb_ptp.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/intel/igb/igb_ptp.c b/drivers/net/ethernet/intel/igb/igb_ptp.c index 0987822359f..0a237507ee8 100644 --- a/drivers/net/ethernet/intel/igb/igb_ptp.c +++ b/drivers/net/ethernet/intel/igb/igb_ptp.c @@ -740,7 +740,7 @@ void igb_ptp_init(struct igb_adapter *adapter) case e1000_82576: snprintf(adapter->ptp_caps.name, 16, "%pm", netdev->dev_addr); adapter->ptp_caps.owner = THIS_MODULE; - adapter->ptp_caps.max_adj = 1000000000; + adapter->ptp_caps.max_adj = 999999881; adapter->ptp_caps.n_ext_ts = 0; adapter->ptp_caps.pps = 0; adapter->ptp_caps.adjfreq = igb_ptp_adjfreq_82576; -- cgit v1.2.3-70-g09d2 From 76a0e68129d7d24eb995a6871ab47081bbfa0acc Mon Sep 17 00:00:00 2001 From: Veaceslav Falico Date: Mon, 25 Mar 2013 22:26:21 +0000 Subject: pch_gbe: fix ip_summed checksum reporting on rx skb->ip_summed should be CHECKSUM_UNNECESSARY when the driver reports that checksums were correct and CHECKSUM_NONE in any other case. They're currently placed vice versa, which breaks the forwarding scenario. Fix it by placing them as described above. Signed-off-by: Veaceslav Falico Signed-off-by: David S. Miller --- drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_main.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_main.c b/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_main.c index 39ab4d09faa..73ce7dd6b95 100644 --- a/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_main.c +++ b/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_main.c @@ -1726,9 +1726,9 @@ pch_gbe_clean_rx(struct pch_gbe_adapter *adapter, skb->protocol = eth_type_trans(skb, netdev); if (tcp_ip_status & PCH_GBE_RXD_ACC_STAT_TCPIPOK) - skb->ip_summed = CHECKSUM_NONE; - else skb->ip_summed = CHECKSUM_UNNECESSARY; + else + skb->ip_summed = CHECKSUM_NONE; napi_gro_receive(&adapter->napi, skb); (*work_done)++; -- cgit v1.2.3-70-g09d2 From 9fe16b78ee17579cb4f333534cf7043e94c67024 Mon Sep 17 00:00:00 2001 From: Veaceslav Falico Date: Tue, 26 Mar 2013 17:43:28 +0100 Subject: bonding: remove already created master sysfs link on failure If slave sysfs symlink failes to be created - we end up without removing the master sysfs symlink. Remove it in case of failure. Signed-off-by: Veaceslav Falico Signed-off-by: David S. Miller --- drivers/net/bonding/bond_sysfs.c | 5 +++++ 1 file changed, 5 insertions(+) (limited to 'drivers/net') diff --git a/drivers/net/bonding/bond_sysfs.c b/drivers/net/bonding/bond_sysfs.c index 1c9e09fbdff..db103e03ba0 100644 --- a/drivers/net/bonding/bond_sysfs.c +++ b/drivers/net/bonding/bond_sysfs.c @@ -183,6 +183,11 @@ int bond_create_slave_symlinks(struct net_device *master, sprintf(linkname, "slave_%s", slave->name); ret = sysfs_create_link(&(master->dev.kobj), &(slave->dev.kobj), linkname); + + /* free the master link created earlier in case of error */ + if (ret) + sysfs_remove_link(&(slave->dev.kobj), "master"); + return ret; } -- cgit v1.2.3-70-g09d2 From d6b057b5dbba97e6ba13aace5270babd7c8b658c Mon Sep 17 00:00:00 2001 From: Christoph Paasch Date: Wed, 20 Mar 2013 08:59:35 +0000 Subject: e1000: ethtool: Add missing dma_mapping_error-call in e1000_setup_desc_rings After dma_map_single, dma_mapping_error must be called. Signed-off-by: Christoph Paasch Tested-by: Aaron Brown Signed-off-by: Jeff Kirsher --- drivers/net/ethernet/intel/e1000/e1000_ethtool.c | 14 +++++++++++--- 1 file changed, 11 insertions(+), 3 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/intel/e1000/e1000_ethtool.c b/drivers/net/ethernet/intel/e1000/e1000_ethtool.c index 43462d596a4..ffd287196bf 100644 --- a/drivers/net/ethernet/intel/e1000/e1000_ethtool.c +++ b/drivers/net/ethernet/intel/e1000/e1000_ethtool.c @@ -1053,6 +1053,10 @@ static int e1000_setup_desc_rings(struct e1000_adapter *adapter) txdr->buffer_info[i].dma = dma_map_single(&pdev->dev, skb->data, skb->len, DMA_TO_DEVICE); + if (dma_mapping_error(&pdev->dev, txdr->buffer_info[i].dma)) { + ret_val = 4; + goto err_nomem; + } tx_desc->buffer_addr = cpu_to_le64(txdr->buffer_info[i].dma); tx_desc->lower.data = cpu_to_le32(skb->len); tx_desc->lower.data |= cpu_to_le32(E1000_TXD_CMD_EOP | @@ -1069,7 +1073,7 @@ static int e1000_setup_desc_rings(struct e1000_adapter *adapter) rxdr->buffer_info = kcalloc(rxdr->count, sizeof(struct e1000_buffer), GFP_KERNEL); if (!rxdr->buffer_info) { - ret_val = 4; + ret_val = 5; goto err_nomem; } @@ -1077,7 +1081,7 @@ static int e1000_setup_desc_rings(struct e1000_adapter *adapter) rxdr->desc = dma_alloc_coherent(&pdev->dev, rxdr->size, &rxdr->dma, GFP_KERNEL); if (!rxdr->desc) { - ret_val = 5; + ret_val = 6; goto err_nomem; } memset(rxdr->desc, 0, rxdr->size); @@ -1101,7 +1105,7 @@ static int e1000_setup_desc_rings(struct e1000_adapter *adapter) skb = alloc_skb(E1000_RXBUFFER_2048 + NET_IP_ALIGN, GFP_KERNEL); if (!skb) { - ret_val = 6; + ret_val = 7; goto err_nomem; } skb_reserve(skb, NET_IP_ALIGN); @@ -1110,6 +1114,10 @@ static int e1000_setup_desc_rings(struct e1000_adapter *adapter) rxdr->buffer_info[i].dma = dma_map_single(&pdev->dev, skb->data, E1000_RXBUFFER_2048, DMA_FROM_DEVICE); + if (dma_mapping_error(&pdev->dev, rxdr->buffer_info[i].dma)) { + ret_val = 8; + goto err_nomem; + } rx_desc->buffer_addr = cpu_to_le64(rxdr->buffer_info[i].dma); memset(skb->data, 0x00, skb->len); } -- cgit v1.2.3-70-g09d2 From 065946c65a61943b4c609a0a1b1bac6742b3b593 Mon Sep 17 00:00:00 2001 From: Christoph Paasch Date: Wed, 20 Mar 2013 08:59:41 +0000 Subject: ixgb: Add missing dma_mapping_error-call in ixgb_alloc_rx_buffers After dma_map_single, dma_mapping_error must be called. It seems safe to not free the skb allocated in this function, as the skb can be reused later. Additionally this patch fixes one coding-style error. Signed-off-by: Christoph Paasch Tested-by: Aaron Brown Signed-off-by: Jeff Kirsher --- drivers/net/ethernet/intel/ixgb/ixgb_main.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/intel/ixgb/ixgb_main.c b/drivers/net/ethernet/intel/ixgb/ixgb_main.c index ea480837343..b5f94abe3cf 100644 --- a/drivers/net/ethernet/intel/ixgb/ixgb_main.c +++ b/drivers/net/ethernet/intel/ixgb/ixgb_main.c @@ -2159,6 +2159,10 @@ map_skb: skb->data, adapter->rx_buffer_len, DMA_FROM_DEVICE); + if (dma_mapping_error(&pdev->dev, buffer_info->dma)) { + adapter->alloc_rx_buff_failed++; + break; + } rx_desc = IXGB_RX_DESC(*rx_ring, i); rx_desc->buff_addr = cpu_to_le64(buffer_info->dma); @@ -2168,7 +2172,8 @@ map_skb: rx_desc->status = 0; - if (++i == rx_ring->count) i = 0; + if (++i == rx_ring->count) + i = 0; buffer_info = &rx_ring->buffer_info[i]; } -- cgit v1.2.3-70-g09d2 From 37287fae7e4506fb0822523587c769783164cdd6 Mon Sep 17 00:00:00 2001 From: Christoph Paasch Date: Wed, 20 Mar 2013 08:59:46 +0000 Subject: e1000e: Add missing dma_mapping_error-call in e1000_alloc_jumbo_rx_buffers After dma_map_page, dma_mapping_error must be called. It seems safe to not free the skb/page allocated in this function, as the skb/page can be reused later. Signed-off-by: Christoph Paasch Tested-by: Aaron Brown Signed-off-by: Jeff Kirsher --- drivers/net/ethernet/intel/e1000e/netdev.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/intel/e1000e/netdev.c b/drivers/net/ethernet/intel/e1000e/netdev.c index 948b86ffa4f..7e615e2bf7e 100644 --- a/drivers/net/ethernet/intel/e1000e/netdev.c +++ b/drivers/net/ethernet/intel/e1000e/netdev.c @@ -848,11 +848,16 @@ check_page: } } - if (!buffer_info->dma) + if (!buffer_info->dma) { buffer_info->dma = dma_map_page(&pdev->dev, buffer_info->page, 0, PAGE_SIZE, DMA_FROM_DEVICE); + if (dma_mapping_error(&pdev->dev, buffer_info->dma)) { + adapter->alloc_rx_buff_failed++; + break; + } + } rx_desc = E1000_RX_DESC_EXT(*rx_ring, i); rx_desc->read.buffer_addr = cpu_to_le64(buffer_info->dma); -- cgit v1.2.3-70-g09d2 From f901b6bc404b67d96eca739857c097e022727b71 Mon Sep 17 00:00:00 2001 From: Marc Kleine-Budde Date: Wed, 27 Mar 2013 11:36:42 +0100 Subject: can: sja1000: fix define conflict on SH Thias patch fixes a define conflict between the SH architecture and the sja1000 driver: drivers/net/can/sja1000/sja1000.h:59:0: warning: "REG_SR" redefined [enabled by default] arch/sh/include/asm/ptrace_32.h:25:0: note: this is the location of the previous definition A SJA1000_ prefix is added to the offending sja1000 define only, to make a minimal patch suited for stable. A later patch will add a SJA1000_ prefix to all defines in sja1000.h. Cc: linux-stable Reported-by: Fengguang Wu Signed-off-by: Marc Kleine-Budde --- drivers/net/can/sja1000/plx_pci.c | 4 ++-- drivers/net/can/sja1000/sja1000.c | 6 +++--- drivers/net/can/sja1000/sja1000.h | 2 +- 3 files changed, 6 insertions(+), 6 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/can/sja1000/plx_pci.c b/drivers/net/can/sja1000/plx_pci.c index a042cdc260d..3c18d7d000e 100644 --- a/drivers/net/can/sja1000/plx_pci.c +++ b/drivers/net/can/sja1000/plx_pci.c @@ -348,7 +348,7 @@ static inline int plx_pci_check_sja1000(const struct sja1000_priv *priv) */ if ((priv->read_reg(priv, REG_CR) & REG_CR_BASICCAN_INITIAL_MASK) == REG_CR_BASICCAN_INITIAL && - (priv->read_reg(priv, REG_SR) == REG_SR_BASICCAN_INITIAL) && + (priv->read_reg(priv, SJA1000_REG_SR) == REG_SR_BASICCAN_INITIAL) && (priv->read_reg(priv, REG_IR) == REG_IR_BASICCAN_INITIAL)) flag = 1; @@ -360,7 +360,7 @@ static inline int plx_pci_check_sja1000(const struct sja1000_priv *priv) * See states on p. 23 of the Datasheet. */ if (priv->read_reg(priv, REG_MOD) == REG_MOD_PELICAN_INITIAL && - priv->read_reg(priv, REG_SR) == REG_SR_PELICAN_INITIAL && + priv->read_reg(priv, SJA1000_REG_SR) == REG_SR_PELICAN_INITIAL && priv->read_reg(priv, REG_IR) == REG_IR_PELICAN_INITIAL) return flag; diff --git a/drivers/net/can/sja1000/sja1000.c b/drivers/net/can/sja1000/sja1000.c index daf4013a8fc..e4df307eaa9 100644 --- a/drivers/net/can/sja1000/sja1000.c +++ b/drivers/net/can/sja1000/sja1000.c @@ -92,7 +92,7 @@ static void sja1000_write_cmdreg(struct sja1000_priv *priv, u8 val) */ spin_lock_irqsave(&priv->cmdreg_lock, flags); priv->write_reg(priv, REG_CMR, val); - priv->read_reg(priv, REG_SR); + priv->read_reg(priv, SJA1000_REG_SR); spin_unlock_irqrestore(&priv->cmdreg_lock, flags); } @@ -502,7 +502,7 @@ irqreturn_t sja1000_interrupt(int irq, void *dev_id) while ((isrc = priv->read_reg(priv, REG_IR)) && (n < SJA1000_MAX_IRQ)) { n++; - status = priv->read_reg(priv, REG_SR); + status = priv->read_reg(priv, SJA1000_REG_SR); /* check for absent controller due to hw unplug */ if (status == 0xFF && sja1000_is_absent(priv)) return IRQ_NONE; @@ -530,7 +530,7 @@ irqreturn_t sja1000_interrupt(int irq, void *dev_id) /* receive interrupt */ while (status & SR_RBS) { sja1000_rx(dev); - status = priv->read_reg(priv, REG_SR); + status = priv->read_reg(priv, SJA1000_REG_SR); /* check for absent controller */ if (status == 0xFF && sja1000_is_absent(priv)) return IRQ_NONE; diff --git a/drivers/net/can/sja1000/sja1000.h b/drivers/net/can/sja1000/sja1000.h index afa99847a51..aa48e053da2 100644 --- a/drivers/net/can/sja1000/sja1000.h +++ b/drivers/net/can/sja1000/sja1000.h @@ -56,7 +56,7 @@ /* SJA1000 registers - manual section 6.4 (Pelican Mode) */ #define REG_MOD 0x00 #define REG_CMR 0x01 -#define REG_SR 0x02 +#define SJA1000_REG_SR 0x02 #define REG_IR 0x03 #define REG_IER 0x04 #define REG_ALC 0x0B -- cgit v1.2.3-70-g09d2 From 3fd33497f80aa528ded0db2851b48638635d5caa Mon Sep 17 00:00:00 2001 From: Marc Kleine-Budde Date: Wed, 27 Mar 2013 12:47:13 +0100 Subject: can: sja1000: limit PEAK PCAN-PC Card to HAS_IOPORT This patch limits the PEAK PCAN-PC Card driver to systems with ioports. Fixes a compile time breakage on SH: drivers/net/can/sja1000/peak_pcmcia.c:626:2: error: implicit declaration of function 'ioport_unmap' Reported-by: Fengguang Wu Cc: Paul Mundt Signed-off-by: Marc Kleine-Budde --- drivers/net/can/sja1000/Kconfig | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers/net') diff --git a/drivers/net/can/sja1000/Kconfig b/drivers/net/can/sja1000/Kconfig index b39ca5b3ea7..ff2ba86cd4a 100644 --- a/drivers/net/can/sja1000/Kconfig +++ b/drivers/net/can/sja1000/Kconfig @@ -46,6 +46,7 @@ config CAN_EMS_PCI config CAN_PEAK_PCMCIA tristate "PEAK PCAN-PC Card" depends on PCMCIA + depends on HAS_IOPORT ---help--- This driver is for the PCAN-PC Card PCMCIA adapter (1 or 2 channels) from PEAK-System (http://www.peak-system.com). To compile this -- cgit v1.2.3-70-g09d2 From 54683441a92ebe20c5282465ea6f21e5e74d2974 Mon Sep 17 00:00:00 2001 From: "John W. Linville" Date: Wed, 27 Mar 2013 10:52:11 -0400 Subject: Revert "brcmsmac: support 4313iPA" This reverts commit b6fc28a158076ca2764edc9a6d1e1402f56e1c0c. This commit is reported to cause a regression in the support for some revisions of 4313 ePA devices. http://marc.info/?l=linux-wireless&m=136360340200943&w=2 Conflicts: drivers/net/wireless/brcm80211/brcmsmac/phy/phy_lcn.c Reported-by: David Herrmann Signed-off-by: John W. Linville --- .../net/wireless/brcm80211/brcmsmac/phy/phy_lcn.c | 369 ++++++++------------- .../wireless/brcm80211/brcmsmac/phy/phytbl_lcn.c | 64 ++-- 2 files changed, 162 insertions(+), 271 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/wireless/brcm80211/brcmsmac/phy/phy_lcn.c b/drivers/net/wireless/brcm80211/brcmsmac/phy/phy_lcn.c index 21a82423247..18d37645e2c 100644 --- a/drivers/net/wireless/brcm80211/brcmsmac/phy/phy_lcn.c +++ b/drivers/net/wireless/brcm80211/brcmsmac/phy/phy_lcn.c @@ -1137,9 +1137,8 @@ wlc_lcnphy_set_rx_gain_by_distribution(struct brcms_phy *pi, gain0_15 = ((biq1 & 0xf) << 12) | ((tia & 0xf) << 8) | ((lna2 & 0x3) << 6) | - ((lna2 & 0x3) << 4) | - ((lna1 & 0x3) << 2) | - ((lna1 & 0x3) << 0); + ((lna2 & + 0x3) << 4) | ((lna1 & 0x3) << 2) | ((lna1 & 0x3) << 0); mod_phy_reg(pi, 0x4b6, (0xffff << 0), gain0_15 << 0); mod_phy_reg(pi, 0x4b7, (0xf << 0), gain16_19 << 0); @@ -1157,8 +1156,6 @@ wlc_lcnphy_set_rx_gain_by_distribution(struct brcms_phy *pi, } mod_phy_reg(pi, 0x44d, (0x1 << 0), (!trsw) << 0); - mod_phy_reg(pi, 0x4b1, (0x3 << 11), lna1 << 11); - mod_phy_reg(pi, 0x4e6, (0x3 << 3), lna1 << 3); } @@ -1331,43 +1328,6 @@ static u32 wlc_lcnphy_measure_digital_power(struct brcms_phy *pi, u16 nsamples) return (iq_est.i_pwr + iq_est.q_pwr) / nsamples; } -static bool wlc_lcnphy_rx_iq_cal_gain(struct brcms_phy *pi, u16 biq1_gain, - u16 tia_gain, u16 lna2_gain) -{ - u32 i_thresh_l, q_thresh_l; - u32 i_thresh_h, q_thresh_h; - struct lcnphy_iq_est iq_est_h, iq_est_l; - - wlc_lcnphy_set_rx_gain_by_distribution(pi, 0, 0, 0, biq1_gain, tia_gain, - lna2_gain, 0); - - wlc_lcnphy_rx_gain_override_enable(pi, true); - wlc_lcnphy_start_tx_tone(pi, 2000, (40 >> 1), 0); - udelay(500); - write_radio_reg(pi, RADIO_2064_REG112, 0); - if (!wlc_lcnphy_rx_iq_est(pi, 1024, 32, &iq_est_l)) - return false; - - wlc_lcnphy_start_tx_tone(pi, 2000, 40, 0); - udelay(500); - write_radio_reg(pi, RADIO_2064_REG112, 0); - if (!wlc_lcnphy_rx_iq_est(pi, 1024, 32, &iq_est_h)) - return false; - - i_thresh_l = (iq_est_l.i_pwr << 1); - i_thresh_h = (iq_est_l.i_pwr << 2) + iq_est_l.i_pwr; - - q_thresh_l = (iq_est_l.q_pwr << 1); - q_thresh_h = (iq_est_l.q_pwr << 2) + iq_est_l.q_pwr; - if ((iq_est_h.i_pwr > i_thresh_l) && - (iq_est_h.i_pwr < i_thresh_h) && - (iq_est_h.q_pwr > q_thresh_l) && - (iq_est_h.q_pwr < q_thresh_h)) - return true; - - return false; -} - static bool wlc_lcnphy_rx_iq_cal(struct brcms_phy *pi, const struct lcnphy_rx_iqcomp *iqcomp, @@ -1382,8 +1342,8 @@ wlc_lcnphy_rx_iq_cal(struct brcms_phy *pi, RFOverrideVal0_old, rfoverride2_old, rfoverride2val_old, rfoverride3_old, rfoverride3val_old, rfoverride4_old, rfoverride4val_old, afectrlovr_old, afectrlovrval_old; - int tia_gain, lna2_gain, biq1_gain; - bool set_gain; + int tia_gain; + u32 received_power, rx_pwr_threshold; u16 old_sslpnCalibClkEnCtrl, old_sslpnRxFeClkEnCtrl; u16 values_to_save[11]; s16 *ptr; @@ -1408,134 +1368,126 @@ wlc_lcnphy_rx_iq_cal(struct brcms_phy *pi, goto cal_done; } - WARN_ON(module != 1); - tx_pwr_ctrl = wlc_lcnphy_get_tx_pwr_ctrl(pi); - wlc_lcnphy_set_tx_pwr_ctrl(pi, LCNPHY_TX_PWR_CTRL_OFF); - - for (i = 0; i < 11; i++) - values_to_save[i] = - read_radio_reg(pi, rxiq_cal_rf_reg[i]); - Core1TxControl_old = read_phy_reg(pi, 0x631); - - or_phy_reg(pi, 0x631, 0x0015); - - RFOverride0_old = read_phy_reg(pi, 0x44c); - RFOverrideVal0_old = read_phy_reg(pi, 0x44d); - rfoverride2_old = read_phy_reg(pi, 0x4b0); - rfoverride2val_old = read_phy_reg(pi, 0x4b1); - rfoverride3_old = read_phy_reg(pi, 0x4f9); - rfoverride3val_old = read_phy_reg(pi, 0x4fa); - rfoverride4_old = read_phy_reg(pi, 0x938); - rfoverride4val_old = read_phy_reg(pi, 0x939); - afectrlovr_old = read_phy_reg(pi, 0x43b); - afectrlovrval_old = read_phy_reg(pi, 0x43c); - old_sslpnCalibClkEnCtrl = read_phy_reg(pi, 0x6da); - old_sslpnRxFeClkEnCtrl = read_phy_reg(pi, 0x6db); - - tx_gain_override_old = wlc_lcnphy_tx_gain_override_enabled(pi); - if (tx_gain_override_old) { - wlc_lcnphy_get_tx_gain(pi, &old_gains); - tx_gain_index_old = pi_lcn->lcnphy_current_index; - } - - wlc_lcnphy_set_tx_pwr_by_index(pi, tx_gain_idx); + if (module == 1) { - mod_phy_reg(pi, 0x4f9, (0x1 << 0), 1 << 0); - mod_phy_reg(pi, 0x4fa, (0x1 << 0), 0 << 0); + tx_pwr_ctrl = wlc_lcnphy_get_tx_pwr_ctrl(pi); + wlc_lcnphy_set_tx_pwr_ctrl(pi, LCNPHY_TX_PWR_CTRL_OFF); - mod_phy_reg(pi, 0x43b, (0x1 << 1), 1 << 1); - mod_phy_reg(pi, 0x43c, (0x1 << 1), 0 << 1); + for (i = 0; i < 11; i++) + values_to_save[i] = + read_radio_reg(pi, rxiq_cal_rf_reg[i]); + Core1TxControl_old = read_phy_reg(pi, 0x631); + + or_phy_reg(pi, 0x631, 0x0015); + + RFOverride0_old = read_phy_reg(pi, 0x44c); + RFOverrideVal0_old = read_phy_reg(pi, 0x44d); + rfoverride2_old = read_phy_reg(pi, 0x4b0); + rfoverride2val_old = read_phy_reg(pi, 0x4b1); + rfoverride3_old = read_phy_reg(pi, 0x4f9); + rfoverride3val_old = read_phy_reg(pi, 0x4fa); + rfoverride4_old = read_phy_reg(pi, 0x938); + rfoverride4val_old = read_phy_reg(pi, 0x939); + afectrlovr_old = read_phy_reg(pi, 0x43b); + afectrlovrval_old = read_phy_reg(pi, 0x43c); + old_sslpnCalibClkEnCtrl = read_phy_reg(pi, 0x6da); + old_sslpnRxFeClkEnCtrl = read_phy_reg(pi, 0x6db); + + tx_gain_override_old = wlc_lcnphy_tx_gain_override_enabled(pi); + if (tx_gain_override_old) { + wlc_lcnphy_get_tx_gain(pi, &old_gains); + tx_gain_index_old = pi_lcn->lcnphy_current_index; + } - write_radio_reg(pi, RADIO_2064_REG116, 0x06); - write_radio_reg(pi, RADIO_2064_REG12C, 0x07); - write_radio_reg(pi, RADIO_2064_REG06A, 0xd3); - write_radio_reg(pi, RADIO_2064_REG098, 0x03); - write_radio_reg(pi, RADIO_2064_REG00B, 0x7); - mod_radio_reg(pi, RADIO_2064_REG113, 1 << 4, 1 << 4); - write_radio_reg(pi, RADIO_2064_REG01D, 0x01); - write_radio_reg(pi, RADIO_2064_REG114, 0x01); - write_radio_reg(pi, RADIO_2064_REG02E, 0x10); - write_radio_reg(pi, RADIO_2064_REG12A, 0x08); - - mod_phy_reg(pi, 0x938, (0x1 << 0), 1 << 0); - mod_phy_reg(pi, 0x939, (0x1 << 0), 0 << 0); - mod_phy_reg(pi, 0x938, (0x1 << 1), 1 << 1); - mod_phy_reg(pi, 0x939, (0x1 << 1), 1 << 1); - mod_phy_reg(pi, 0x938, (0x1 << 2), 1 << 2); - mod_phy_reg(pi, 0x939, (0x1 << 2), 1 << 2); - mod_phy_reg(pi, 0x938, (0x1 << 3), 1 << 3); - mod_phy_reg(pi, 0x939, (0x1 << 3), 1 << 3); - mod_phy_reg(pi, 0x938, (0x1 << 5), 1 << 5); - mod_phy_reg(pi, 0x939, (0x1 << 5), 0 << 5); + wlc_lcnphy_set_tx_pwr_by_index(pi, tx_gain_idx); - mod_phy_reg(pi, 0x43b, (0x1 << 0), 1 << 0); - mod_phy_reg(pi, 0x43c, (0x1 << 0), 0 << 0); + mod_phy_reg(pi, 0x4f9, (0x1 << 0), 1 << 0); + mod_phy_reg(pi, 0x4fa, (0x1 << 0), 0 << 0); - write_phy_reg(pi, 0x6da, 0xffff); - or_phy_reg(pi, 0x6db, 0x3); + mod_phy_reg(pi, 0x43b, (0x1 << 1), 1 << 1); + mod_phy_reg(pi, 0x43c, (0x1 << 1), 0 << 1); - wlc_lcnphy_set_trsw_override(pi, tx_switch, rx_switch); - set_gain = false; - - lna2_gain = 3; - while ((lna2_gain >= 0) && !set_gain) { - tia_gain = 4; - - while ((tia_gain >= 0) && !set_gain) { - biq1_gain = 6; - - while ((biq1_gain >= 0) && !set_gain) { - set_gain = wlc_lcnphy_rx_iq_cal_gain(pi, - (u16) - biq1_gain, - (u16) - tia_gain, - (u16) - lna2_gain); - biq1_gain -= 1; - } + write_radio_reg(pi, RADIO_2064_REG116, 0x06); + write_radio_reg(pi, RADIO_2064_REG12C, 0x07); + write_radio_reg(pi, RADIO_2064_REG06A, 0xd3); + write_radio_reg(pi, RADIO_2064_REG098, 0x03); + write_radio_reg(pi, RADIO_2064_REG00B, 0x7); + mod_radio_reg(pi, RADIO_2064_REG113, 1 << 4, 1 << 4); + write_radio_reg(pi, RADIO_2064_REG01D, 0x01); + write_radio_reg(pi, RADIO_2064_REG114, 0x01); + write_radio_reg(pi, RADIO_2064_REG02E, 0x10); + write_radio_reg(pi, RADIO_2064_REG12A, 0x08); + + mod_phy_reg(pi, 0x938, (0x1 << 0), 1 << 0); + mod_phy_reg(pi, 0x939, (0x1 << 0), 0 << 0); + mod_phy_reg(pi, 0x938, (0x1 << 1), 1 << 1); + mod_phy_reg(pi, 0x939, (0x1 << 1), 1 << 1); + mod_phy_reg(pi, 0x938, (0x1 << 2), 1 << 2); + mod_phy_reg(pi, 0x939, (0x1 << 2), 1 << 2); + mod_phy_reg(pi, 0x938, (0x1 << 3), 1 << 3); + mod_phy_reg(pi, 0x939, (0x1 << 3), 1 << 3); + mod_phy_reg(pi, 0x938, (0x1 << 5), 1 << 5); + mod_phy_reg(pi, 0x939, (0x1 << 5), 0 << 5); + + mod_phy_reg(pi, 0x43b, (0x1 << 0), 1 << 0); + mod_phy_reg(pi, 0x43c, (0x1 << 0), 0 << 0); + + wlc_lcnphy_start_tx_tone(pi, 2000, 120, 0); + write_phy_reg(pi, 0x6da, 0xffff); + or_phy_reg(pi, 0x6db, 0x3); + wlc_lcnphy_set_trsw_override(pi, tx_switch, rx_switch); + wlc_lcnphy_rx_gain_override_enable(pi, true); + + tia_gain = 8; + rx_pwr_threshold = 950; + while (tia_gain > 0) { tia_gain -= 1; + wlc_lcnphy_set_rx_gain_by_distribution(pi, + 0, 0, 2, 2, + (u16) + tia_gain, 1, 0); + udelay(500); + + received_power = + wlc_lcnphy_measure_digital_power(pi, 2000); + if (received_power < rx_pwr_threshold) + break; } - lna2_gain -= 1; - } + result = wlc_lcnphy_calc_rx_iq_comp(pi, 0xffff); - if (set_gain) - result = wlc_lcnphy_calc_rx_iq_comp(pi, 1024); - else - result = false; + wlc_lcnphy_stop_tx_tone(pi); - wlc_lcnphy_stop_tx_tone(pi); + write_phy_reg(pi, 0x631, Core1TxControl_old); - write_phy_reg(pi, 0x631, Core1TxControl_old); - - write_phy_reg(pi, 0x44c, RFOverrideVal0_old); - write_phy_reg(pi, 0x44d, RFOverrideVal0_old); - write_phy_reg(pi, 0x4b0, rfoverride2_old); - write_phy_reg(pi, 0x4b1, rfoverride2val_old); - write_phy_reg(pi, 0x4f9, rfoverride3_old); - write_phy_reg(pi, 0x4fa, rfoverride3val_old); - write_phy_reg(pi, 0x938, rfoverride4_old); - write_phy_reg(pi, 0x939, rfoverride4val_old); - write_phy_reg(pi, 0x43b, afectrlovr_old); - write_phy_reg(pi, 0x43c, afectrlovrval_old); - write_phy_reg(pi, 0x6da, old_sslpnCalibClkEnCtrl); - write_phy_reg(pi, 0x6db, old_sslpnRxFeClkEnCtrl); + write_phy_reg(pi, 0x44c, RFOverrideVal0_old); + write_phy_reg(pi, 0x44d, RFOverrideVal0_old); + write_phy_reg(pi, 0x4b0, rfoverride2_old); + write_phy_reg(pi, 0x4b1, rfoverride2val_old); + write_phy_reg(pi, 0x4f9, rfoverride3_old); + write_phy_reg(pi, 0x4fa, rfoverride3val_old); + write_phy_reg(pi, 0x938, rfoverride4_old); + write_phy_reg(pi, 0x939, rfoverride4val_old); + write_phy_reg(pi, 0x43b, afectrlovr_old); + write_phy_reg(pi, 0x43c, afectrlovrval_old); + write_phy_reg(pi, 0x6da, old_sslpnCalibClkEnCtrl); + write_phy_reg(pi, 0x6db, old_sslpnRxFeClkEnCtrl); - wlc_lcnphy_clear_trsw_override(pi); + wlc_lcnphy_clear_trsw_override(pi); - mod_phy_reg(pi, 0x44c, (0x1 << 2), 0 << 2); + mod_phy_reg(pi, 0x44c, (0x1 << 2), 0 << 2); - for (i = 0; i < 11; i++) - write_radio_reg(pi, rxiq_cal_rf_reg[i], - values_to_save[i]); + for (i = 0; i < 11; i++) + write_radio_reg(pi, rxiq_cal_rf_reg[i], + values_to_save[i]); - if (tx_gain_override_old) - wlc_lcnphy_set_tx_pwr_by_index(pi, tx_gain_index_old); - else - wlc_lcnphy_disable_tx_gain_override(pi); + if (tx_gain_override_old) + wlc_lcnphy_set_tx_pwr_by_index(pi, tx_gain_index_old); + else + wlc_lcnphy_disable_tx_gain_override(pi); - wlc_lcnphy_set_tx_pwr_ctrl(pi, tx_pwr_ctrl); - wlc_lcnphy_rx_gain_override_enable(pi, false); + wlc_lcnphy_set_tx_pwr_ctrl(pi, tx_pwr_ctrl); + wlc_lcnphy_rx_gain_override_enable(pi, false); + } cal_done: kfree(ptr); @@ -1829,17 +1781,6 @@ wlc_lcnphy_radio_2064_channel_tune_4313(struct brcms_phy *pi, u8 channel) write_radio_reg(pi, RADIO_2064_REG038, 3); write_radio_reg(pi, RADIO_2064_REG091, 7); } - - if (!(pi->sh->boardflags & BFL_FEM)) { - u8 reg038[14] = {0xd, 0xe, 0xd, 0xd, 0xd, 0xc, - 0xa, 0xb, 0xb, 0x3, 0x3, 0x2, 0x0, 0x0}; - - write_radio_reg(pi, RADIO_2064_REG02A, 0xf); - write_radio_reg(pi, RADIO_2064_REG091, 0x3); - write_radio_reg(pi, RADIO_2064_REG038, 0x3); - - write_radio_reg(pi, RADIO_2064_REG038, reg038[channel - 1]); - } } static int @@ -2034,16 +1975,6 @@ wlc_lcnphy_set_tssi_mux(struct brcms_phy *pi, enum lcnphy_tssi_mode pos) } else { mod_radio_reg(pi, RADIO_2064_REG03A, 1, 0x1); mod_radio_reg(pi, RADIO_2064_REG11A, 0x8, 0x8); - mod_radio_reg(pi, RADIO_2064_REG028, 0x1, 0x0); - mod_radio_reg(pi, RADIO_2064_REG11A, 0x4, 1<<2); - mod_radio_reg(pi, RADIO_2064_REG036, 0x10, 0x0); - mod_radio_reg(pi, RADIO_2064_REG11A, 0x10, 1<<4); - mod_radio_reg(pi, RADIO_2064_REG036, 0x3, 0x0); - mod_radio_reg(pi, RADIO_2064_REG035, 0xff, 0x77); - mod_radio_reg(pi, RADIO_2064_REG028, 0x1e, 0xe<<1); - mod_radio_reg(pi, RADIO_2064_REG112, 0x80, 1<<7); - mod_radio_reg(pi, RADIO_2064_REG005, 0x7, 1<<1); - mod_radio_reg(pi, RADIO_2064_REG029, 0xf0, 0<<4); } } else { mod_phy_reg(pi, 0x4d9, (0x1 << 2), (0x1) << 2); @@ -2130,14 +2061,12 @@ static void wlc_lcnphy_pwrctrl_rssiparams(struct brcms_phy *pi) (auxpga_vmid_temp << 0) | (auxpga_gain_temp << 12)); mod_radio_reg(pi, RADIO_2064_REG082, (1 << 5), (1 << 5)); - mod_radio_reg(pi, RADIO_2064_REG07C, (1 << 0), (1 << 0)); } static void wlc_lcnphy_tssi_setup(struct brcms_phy *pi) { struct phytbl_info tab; u32 rfseq, ind; - u8 tssi_sel; tab.tbl_id = LCNPHY_TBL_ID_TXPWRCTL; tab.tbl_width = 32; @@ -2159,13 +2088,7 @@ static void wlc_lcnphy_tssi_setup(struct brcms_phy *pi) mod_phy_reg(pi, 0x503, (0x1 << 4), (1) << 4); - if (pi->sh->boardflags & BFL_FEM) { - tssi_sel = 0x1; - wlc_lcnphy_set_tssi_mux(pi, LCNPHY_TSSI_EXT); - } else { - tssi_sel = 0xe; - wlc_lcnphy_set_tssi_mux(pi, LCNPHY_TSSI_POST_PA); - } + wlc_lcnphy_set_tssi_mux(pi, LCNPHY_TSSI_EXT); mod_phy_reg(pi, 0x4a4, (0x1 << 14), (0) << 14); mod_phy_reg(pi, 0x4a4, (0x1 << 15), (1) << 15); @@ -2201,10 +2124,9 @@ static void wlc_lcnphy_tssi_setup(struct brcms_phy *pi) mod_phy_reg(pi, 0x49a, (0x1ff << 0), (0xff) << 0); if (LCNREV_IS(pi->pubpi.phy_rev, 2)) { - mod_radio_reg(pi, RADIO_2064_REG028, 0xf, tssi_sel); + mod_radio_reg(pi, RADIO_2064_REG028, 0xf, 0xe); mod_radio_reg(pi, RADIO_2064_REG086, 0x4, 0x4); } else { - mod_radio_reg(pi, RADIO_2064_REG028, 0x1e, tssi_sel << 1); mod_radio_reg(pi, RADIO_2064_REG03A, 0x1, 1); mod_radio_reg(pi, RADIO_2064_REG11A, 0x8, 1 << 3); } @@ -2251,10 +2173,6 @@ static void wlc_lcnphy_tssi_setup(struct brcms_phy *pi) mod_phy_reg(pi, 0x4d7, (0xf << 8), (0) << 8); - mod_radio_reg(pi, RADIO_2064_REG035, 0xff, 0x0); - mod_radio_reg(pi, RADIO_2064_REG036, 0x3, 0x0); - mod_radio_reg(pi, RADIO_2064_REG11A, 0x8, 0x8); - wlc_lcnphy_pwrctrl_rssiparams(pi); } @@ -2873,8 +2791,6 @@ static void wlc_lcnphy_idle_tssi_est(struct brcms_phy_pub *ppi) read_radio_reg(pi, RADIO_2064_REG007) & 1; u16 SAVE_jtag_auxpga = read_radio_reg(pi, RADIO_2064_REG0FF) & 0x10; u16 SAVE_iqadc_aux_en = read_radio_reg(pi, RADIO_2064_REG11F) & 4; - u8 SAVE_bbmult = wlc_lcnphy_get_bbmult(pi); - idleTssi = read_phy_reg(pi, 0x4ab); suspend = (0 == (bcma_read32(pi->d11core, D11REGOFFS(maccontrol)) & MCTL_EN_MAC)); @@ -2892,12 +2808,6 @@ static void wlc_lcnphy_idle_tssi_est(struct brcms_phy_pub *ppi) mod_radio_reg(pi, RADIO_2064_REG0FF, 0x10, 1 << 4); mod_radio_reg(pi, RADIO_2064_REG11F, 0x4, 1 << 2); wlc_lcnphy_tssi_setup(pi); - - mod_phy_reg(pi, 0x4d7, (0x1 << 0), (1 << 0)); - mod_phy_reg(pi, 0x4d7, (0x1 << 6), (1 << 6)); - - wlc_lcnphy_set_bbmult(pi, 0x0); - wlc_phy_do_dummy_tx(pi, true, OFF); idleTssi = ((read_phy_reg(pi, 0x4ab) & (0x1ff << 0)) >> 0); @@ -2919,7 +2829,6 @@ static void wlc_lcnphy_idle_tssi_est(struct brcms_phy_pub *ppi) mod_phy_reg(pi, 0x44c, (0x1 << 12), (0) << 12); - wlc_lcnphy_set_bbmult(pi, SAVE_bbmult); wlc_lcnphy_set_tx_gain_override(pi, tx_gain_override_old); wlc_lcnphy_set_tx_gain(pi, &old_gains); wlc_lcnphy_set_tx_pwr_ctrl(pi, SAVE_txpwrctrl); @@ -3133,11 +3042,6 @@ static void wlc_lcnphy_tx_pwr_ctrl_init(struct brcms_phy_pub *ppi) wlc_lcnphy_write_table(pi, &tab); tab.tbl_offset++; } - mod_phy_reg(pi, 0x4d0, (0x1 << 0), (0) << 0); - mod_phy_reg(pi, 0x4d3, (0xff << 0), (0) << 0); - mod_phy_reg(pi, 0x4d3, (0xff << 8), (0) << 8); - mod_phy_reg(pi, 0x4d0, (0x1 << 4), (0) << 4); - mod_phy_reg(pi, 0x4d0, (0x1 << 2), (0) << 2); mod_phy_reg(pi, 0x410, (0x1 << 7), (0) << 7); @@ -3939,6 +3843,7 @@ static void wlc_lcnphy_txpwrtbl_iqlo_cal(struct brcms_phy *pi) target_gains.pad_gain = 21; target_gains.dac_gain = 0; wlc_lcnphy_set_tx_gain(pi, &target_gains); + wlc_lcnphy_set_tx_pwr_by_index(pi, 16); if (LCNREV_IS(pi->pubpi.phy_rev, 1) || pi_lcn->lcnphy_hw_iqcal_en) { @@ -3949,7 +3854,6 @@ static void wlc_lcnphy_txpwrtbl_iqlo_cal(struct brcms_phy *pi) lcnphy_recal ? LCNPHY_CAL_RECAL : LCNPHY_CAL_FULL), false); } else { - wlc_lcnphy_set_tx_pwr_by_index(pi, 16); wlc_lcnphy_tx_iqlo_soft_cal_full(pi); } @@ -4374,22 +4278,17 @@ wlc_lcnphy_load_tx_gain_table(struct brcms_phy *pi, if (CHSPEC_IS5G(pi->radio_chanspec)) pa_gain = 0x70; else - pa_gain = 0x60; + pa_gain = 0x70; if (pi->sh->boardflags & BFL_FEM) pa_gain = 0x10; - tab.tbl_id = LCNPHY_TBL_ID_TXPWRCTL; tab.tbl_width = 32; tab.tbl_len = 1; tab.tbl_ptr = &val; for (j = 0; j < 128; j++) { - if (pi->sh->boardflags & BFL_FEM) - gm_gain = gain_table[j].gm; - else - gm_gain = 15; - + gm_gain = gain_table[j].gm; val = (((u32) pa_gain << 24) | (gain_table[j].pad << 16) | (gain_table[j].pga << 8) | gm_gain); @@ -4600,10 +4499,7 @@ static void wlc_radio_2064_init(struct brcms_phy *pi) write_phy_reg(pi, 0x4ea, 0x4688); - if (pi->sh->boardflags & BFL_FEM) - mod_phy_reg(pi, 0x4eb, (0x7 << 0), 2 << 0); - else - mod_phy_reg(pi, 0x4eb, (0x7 << 0), 3 << 0); + mod_phy_reg(pi, 0x4eb, (0x7 << 0), 2 << 0); mod_phy_reg(pi, 0x4eb, (0x7 << 6), 0 << 6); @@ -4614,13 +4510,6 @@ static void wlc_radio_2064_init(struct brcms_phy *pi) wlc_lcnphy_rcal(pi); wlc_lcnphy_rc_cal(pi); - - if (!(pi->sh->boardflags & BFL_FEM)) { - write_radio_reg(pi, RADIO_2064_REG032, 0x6f); - write_radio_reg(pi, RADIO_2064_REG033, 0x19); - write_radio_reg(pi, RADIO_2064_REG039, 0xe); - } - } static void wlc_lcnphy_radio_init(struct brcms_phy *pi) @@ -4650,20 +4539,22 @@ static void wlc_lcnphy_tbl_init(struct brcms_phy *pi) wlc_lcnphy_write_table(pi, &tab); } - if (!(pi->sh->boardflags & BFL_FEM)) { - tab.tbl_id = LCNPHY_TBL_ID_RFSEQ; - tab.tbl_width = 16; - tab.tbl_ptr = &val; - tab.tbl_len = 1; + tab.tbl_id = LCNPHY_TBL_ID_RFSEQ; + tab.tbl_width = 16; + tab.tbl_ptr = &val; + tab.tbl_len = 1; - val = 150; - tab.tbl_offset = 0; - wlc_lcnphy_write_table(pi, &tab); + val = 114; + tab.tbl_offset = 0; + wlc_lcnphy_write_table(pi, &tab); - val = 220; - tab.tbl_offset = 1; - wlc_lcnphy_write_table(pi, &tab); - } + val = 130; + tab.tbl_offset = 1; + wlc_lcnphy_write_table(pi, &tab); + + val = 6; + tab.tbl_offset = 8; + wlc_lcnphy_write_table(pi, &tab); if (CHSPEC_IS2G(pi->radio_chanspec)) { if (pi->sh->boardflags & BFL_FEM) @@ -5055,7 +4946,6 @@ void wlc_phy_chanspec_set_lcnphy(struct brcms_phy *pi, u16 chanspec) wlc_lcnphy_load_tx_iir_filter(pi, true, 3); mod_phy_reg(pi, 0x4eb, (0x7 << 3), (1) << 3); - wlc_lcnphy_tssi_setup(pi); } void wlc_phy_detach_lcnphy(struct brcms_phy *pi) @@ -5094,7 +4984,8 @@ bool wlc_phy_attach_lcnphy(struct brcms_phy *pi) if (!wlc_phy_txpwr_srom_read_lcnphy(pi)) return false; - if (LCNREV_IS(pi->pubpi.phy_rev, 1)) { + if ((pi->sh->boardflags & BFL_FEM) && + (LCNREV_IS(pi->pubpi.phy_rev, 1))) { if (pi_lcn->lcnphy_tempsense_option == 3) { pi->hwpwrctrl = true; pi->hwpwrctrl_capable = true; diff --git a/drivers/net/wireless/brcm80211/brcmsmac/phy/phytbl_lcn.c b/drivers/net/wireless/brcm80211/brcmsmac/phy/phytbl_lcn.c index b7e95acc208..622c01ca72c 100644 --- a/drivers/net/wireless/brcm80211/brcmsmac/phy/phytbl_lcn.c +++ b/drivers/net/wireless/brcm80211/brcmsmac/phy/phytbl_lcn.c @@ -1992,70 +1992,70 @@ static const u16 dot11lcn_sw_ctrl_tbl_4313_epa_rev0[] = { }; static const u16 dot11lcn_sw_ctrl_tbl_4313_rev0[] = { - 0x0009, 0x000a, - 0x0005, - 0x0006, 0x0009, - 0x000a, - 0x0005, 0x0006, - 0x0009, - 0x000a, 0x0005, - 0x0006, - 0x0009, 0x000a, - 0x0005, - 0x0006, 0x0009, - 0x000a, - 0x0005, 0x0006, - 0x0009, - 0x000a, 0x0005, - 0x0006, - 0x0009, 0x000a, - 0x0005, - 0x0006, 0x0009, - 0x000a, - 0x0005, 0x0006, - 0x0009, - 0x000a, 0x0005, - 0x0006, - 0x0009, 0x000a, - 0x0005, - 0x0006, 0x0009, - 0x000a, - 0x0005, 0x0006, - 0x0009, - 0x000a, 0x0005, - 0x0006, + 0x000a, 0x0009, + 0x0006, + 0x0005, 0x000a, + 0x0009, + 0x0006, 0x0005, + 0x000a, + 0x0009, 0x0006, + 0x0005, + 0x000a, 0x0009, + 0x0006, + 0x0005, 0x000a, + 0x0009, + 0x0006, 0x0005, + 0x000a, + 0x0009, 0x0006, + 0x0005, + 0x000a, 0x0009, + 0x0006, + 0x0005, 0x000a, + 0x0009, + 0x0006, 0x0005, + 0x000a, + 0x0009, 0x0006, + 0x0005, + 0x000a, 0x0009, + 0x0006, + 0x0005, 0x000a, + 0x0009, + 0x0006, 0x0005, + 0x000a, + 0x0009, 0x0006, + 0x0005, }; static const u16 dot11lcn_sw_ctrl_tbl_rev0[] = { -- cgit v1.2.3-70-g09d2 From e67dd874e60529dbd2e8232babb1e23479ba2ffa Mon Sep 17 00:00:00 2001 From: RafaÅ‚ MiÅ‚ecki Date: Tue, 19 Mar 2013 07:52:48 +0100 Subject: b43: N-PHY: increase initial value of "mind" in RSSI calibration MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit We're using "mind" variable to find the VCM that got the best polling results. For each VCM we calculte "currd" which is compared to the "mind". For PHY rev3+ "currd" gets values around 14k-40k. Looking for a value smaller than 40 makes no sense, so increase the initial value. This fixes a regression introduced in 3.4 by commit: e0c9a0219a8f542e3946fe972a68aacf8c3f906c (my BCM4322 performance dropped from 18,4Mb/s to 9,26Mb/s) Signed-off-by: RafaÅ‚ MiÅ‚ecki Cc: stable@vger.kernel.org Signed-off-by: John W. Linville --- drivers/net/wireless/b43/phy_n.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/wireless/b43/phy_n.c b/drivers/net/wireless/b43/phy_n.c index 3c35382ee6c..e014a7a8154 100644 --- a/drivers/net/wireless/b43/phy_n.c +++ b/drivers/net/wireless/b43/phy_n.c @@ -1615,7 +1615,7 @@ static void b43_nphy_rev3_rssi_cal(struct b43_wldev *dev) } for (i = 0; i < 4; i += 2) { s32 curr; - s32 mind = 40; + s32 mind = 0x100000; s32 minpoll = 249; u8 minvcm = 0; if (2 * core != i) @@ -1799,7 +1799,7 @@ static void b43_nphy_rev2_rssi_cal(struct b43_wldev *dev, u8 type) } for (i = 0; i < 4; i++) { - s32 mind = 40; + s32 mind = 0x100000; u8 minvcm = 0; s32 minpoll = 249; s32 curr; -- cgit v1.2.3-70-g09d2 From b251412db99ccd4495ce372fec7daee27bf06923 Mon Sep 17 00:00:00 2001 From: "Iestyn C. Elfick" Date: Wed, 20 Mar 2013 14:02:31 -0500 Subject: b43: A fix for DMA transmission sequence errors Intermittently, b43 will report "Out of order TX status report on DMA ring". When this happens, the driver must be reset before communication can resume. The cause of the problem is believed to be an error in the closed-source firmware; however, all versions of the firmware are affected. This change uses the observation that the expected status is always 2 less than the observed value, and supplies a fake status report to skip one header/data pair. Not all devices suffer from this problem, but it can occur several times per second under heavy load. As each occurence kills the unmodified driver, this patch makes if possible for the affected devices to function. The patch logs only the first instance of the reset operation to prevent spamming the logs. Tested-by: Chris Vine Signed-off-by: Larry Finger Cc: Stable Signed-off-by: John W. Linville --- drivers/net/wireless/b43/dma.c | 65 ++++++++++++++++++++++++++++++++++-------- 1 file changed, 53 insertions(+), 12 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/wireless/b43/dma.c b/drivers/net/wireless/b43/dma.c index 38bc5a7997f..122146943bf 100644 --- a/drivers/net/wireless/b43/dma.c +++ b/drivers/net/wireless/b43/dma.c @@ -1487,8 +1487,12 @@ void b43_dma_handle_txstatus(struct b43_wldev *dev, const struct b43_dma_ops *ops; struct b43_dmaring *ring; struct b43_dmadesc_meta *meta; + static const struct b43_txstatus fake; /* filled with 0 */ + const struct b43_txstatus *txstat; int slot, firstused; bool frame_succeed; + int skip; + static u8 err_out1, err_out2; ring = parse_cookie(dev, status->cookie, &slot); if (unlikely(!ring)) @@ -1501,13 +1505,36 @@ void b43_dma_handle_txstatus(struct b43_wldev *dev, firstused = ring->current_slot - ring->used_slots + 1; if (firstused < 0) firstused = ring->nr_slots + firstused; + + skip = 0; if (unlikely(slot != firstused)) { /* This possibly is a firmware bug and will result in - * malfunction, memory leaks and/or stall of DMA functionality. */ - b43dbg(dev->wl, "Out of order TX status report on DMA ring %d. " - "Expected %d, but got %d\n", - ring->index, firstused, slot); - return; + * malfunction, memory leaks and/or stall of DMA functionality. + */ + if (slot == next_slot(ring, next_slot(ring, firstused))) { + /* If a single header/data pair was missed, skip over + * the first two slots in an attempt to recover. + */ + slot = firstused; + skip = 2; + if (!err_out1) { + /* Report the error once. */ + b43dbg(dev->wl, + "Skip on DMA ring %d slot %d.\n", + ring->index, slot); + err_out1 = 1; + } + } else { + /* More than a single header/data pair were missed. + * Report this error once. + */ + if (!err_out2) + b43dbg(dev->wl, + "Out of order TX status report on DMA ring %d. Expected %d, but got %d\n", + ring->index, firstused, slot); + err_out2 = 1; + return; + } } ops = ring->ops; @@ -1522,11 +1549,13 @@ void b43_dma_handle_txstatus(struct b43_wldev *dev, slot, firstused, ring->index); break; } + if (meta->skb) { struct b43_private_tx_info *priv_info = - b43_get_priv_tx_info(IEEE80211_SKB_CB(meta->skb)); + b43_get_priv_tx_info(IEEE80211_SKB_CB(meta->skb)); - unmap_descbuffer(ring, meta->dmaaddr, meta->skb->len, 1); + unmap_descbuffer(ring, meta->dmaaddr, + meta->skb->len, 1); kfree(priv_info->bouncebuffer); priv_info->bouncebuffer = NULL; } else { @@ -1538,8 +1567,9 @@ void b43_dma_handle_txstatus(struct b43_wldev *dev, struct ieee80211_tx_info *info; if (unlikely(!meta->skb)) { - /* This is a scatter-gather fragment of a frame, so - * the skb pointer must not be NULL. */ + /* This is a scatter-gather fragment of a frame, + * so the skb pointer must not be NULL. + */ b43dbg(dev->wl, "TX status unexpected NULL skb " "at slot %d (first=%d) on ring %d\n", slot, firstused, ring->index); @@ -1550,9 +1580,18 @@ void b43_dma_handle_txstatus(struct b43_wldev *dev, /* * Call back to inform the ieee80211 subsystem about - * the status of the transmission. + * the status of the transmission. When skipping over + * a missed TX status report, use a status structure + * filled with zeros to indicate that the frame was not + * sent (frame_count 0) and not acknowledged */ - frame_succeed = b43_fill_txstatus_report(dev, info, status); + if (unlikely(skip)) + txstat = &fake; + else + txstat = status; + + frame_succeed = b43_fill_txstatus_report(dev, info, + txstat); #ifdef CONFIG_B43_DEBUG if (frame_succeed) ring->nr_succeed_tx_packets++; @@ -1580,12 +1619,14 @@ void b43_dma_handle_txstatus(struct b43_wldev *dev, /* Everything unmapped and free'd. So it's not used anymore. */ ring->used_slots--; - if (meta->is_last_fragment) { + if (meta->is_last_fragment && !skip) { /* This is the last scatter-gather * fragment of the frame. We are done. */ break; } slot = next_slot(ring, slot); + if (skip > 0) + --skip; } if (ring->stopped) { B43_WARN_ON(free_slots(ring) < TX_SLOTS_PER_FRAME); -- cgit v1.2.3-70-g09d2 From 7fc0357479eeff4ca808c4d8c09bc7631f576b8d Mon Sep 17 00:00:00 2001 From: "Luis R. Rodriguez" Date: Mon, 25 Mar 2013 11:27:46 -0700 Subject: ath9k: avoid queueing hw check work when suspended The following issue was reported. WARNING: at net/mac80211/util.c:599 ieee80211_can_queue_work.isra.7+0x32/0x40 [mac80211]() Hardware name: iMac12,1 queueing ieee80211 work while going to suspend Pid: 0, comm: swapper/0 Tainted: PF O 3.8.2-206.fc18.x86_64 #1 Call Trace: Mar 16 09:39:17 Parags-iMac kernel: [ 3993.642992] [] warn_slowpath_common+0x7f/0xc0 [] ? ath_start_rx_poll+0x70/0x70 [ath9k] ] warn_slowpath_fmt+0x46/0x50 [] ieee80211_can_queue_work.isra.7+0x32/0x40 Fix this by avoiding to queue the work if our device has already been marked as suspended or stopped. Reported-by: Parag Warudkar Tested-by: Parag Warudkar Cc: stable@vger.kernel.org Signed-off-by: Luis R. Rodriguez Signed-off-by: John W. Linville --- drivers/net/wireless/ath/ath9k/link.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'drivers/net') diff --git a/drivers/net/wireless/ath/ath9k/link.c b/drivers/net/wireless/ath/ath9k/link.c index 39c84ecf6a4..7fdac6c7b3e 100644 --- a/drivers/net/wireless/ath/ath9k/link.c +++ b/drivers/net/wireless/ath/ath9k/link.c @@ -170,7 +170,8 @@ void ath_rx_poll(unsigned long data) { struct ath_softc *sc = (struct ath_softc *)data; - ieee80211_queue_work(sc->hw, &sc->hw_check_work); + if (!test_bit(SC_OP_INVALID, &sc->sc_flags)) + ieee80211_queue_work(sc->hw, &sc->hw_check_work); } /* -- cgit v1.2.3-70-g09d2 From ace5af39866da7d45f43774150dace19a73716d6 Mon Sep 17 00:00:00 2001 From: Colin Ian King Date: Tue, 26 Mar 2013 17:35:23 +0000 Subject: iwlegacy: 4965-rs: avoid null pointer dereference error il4965_rs_initialize_lq checks to see if sta is null, however, before that check il4965_rs_use_green dereferences sta when intializing use_green. Avoid a potential null pointer dereference error by only calling il4965_rs_use_green after we are sure sta is not null. Smatch analysis: drivers/net/wireless/iwlegacy/4965-rs.c:2160 il4965_rs_initialize_lq() warn: variable dereferenced before check 'sta' (see line 2155) Signed-off-by: Colin Ian King Signed-off-by: John W. Linville --- drivers/net/wireless/iwlegacy/4965-rs.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'drivers/net') diff --git a/drivers/net/wireless/iwlegacy/4965-rs.c b/drivers/net/wireless/iwlegacy/4965-rs.c index e8324b5e5bf..6c7493c2d69 100644 --- a/drivers/net/wireless/iwlegacy/4965-rs.c +++ b/drivers/net/wireless/iwlegacy/4965-rs.c @@ -2152,7 +2152,7 @@ il4965_rs_initialize_lq(struct il_priv *il, struct ieee80211_conf *conf, int rate_idx; int i; u32 rate; - u8 use_green = il4965_rs_use_green(il, sta); + u8 use_green; u8 active_tbl = 0; u8 valid_tx_ant; struct il_station_priv *sta_priv; @@ -2160,6 +2160,7 @@ il4965_rs_initialize_lq(struct il_priv *il, struct ieee80211_conf *conf, if (!sta || !lq_sta) return; + use_green = il4965_rs_use_green(il, sta); sta_priv = (void *)sta->drv_priv; i = lq_sta->last_txrate_idx; -- cgit v1.2.3-70-g09d2 From 2e1253d640eb7f8707d2591c93097c1e9f9c71d5 Mon Sep 17 00:00:00 2001 From: RafaÅ‚ MiÅ‚ecki Date: Wed, 27 Mar 2013 08:37:08 +0100 Subject: b43: N-PHY: use more bits for offset in RSSI calibration MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit When calculating "offset" for final RSSI calibration we're using numbers bigger than s8 can hold. We have for example: offset[j] = 232 - poll_results[j]; formula. If poll_results[j] is small enough (it usually is) we treat number's bit as a sign bit. For example 232 - 1 becomes: 0xE8 - 0x1 = 0xE7, which is not 231 but -25. This code was introduced in e0c9a0219a8f542e3946fe972a68aacf8c3f906c and caused stability regression on some cards, for ex. BCM4322. Signed-off-by: RafaÅ‚ MiÅ‚ecki Cc: stable@vger.kernel.org Signed-off-by: John W. Linville --- drivers/net/wireless/b43/phy_n.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/wireless/b43/phy_n.c b/drivers/net/wireless/b43/phy_n.c index e014a7a8154..e8486c1e091 100644 --- a/drivers/net/wireless/b43/phy_n.c +++ b/drivers/net/wireless/b43/phy_n.c @@ -1564,7 +1564,7 @@ static void b43_nphy_rev3_rssi_cal(struct b43_wldev *dev) u16 clip_off[2] = { 0xFFFF, 0xFFFF }; u8 vcm_final = 0; - s8 offset[4]; + s32 offset[4]; s32 results[8][4] = { }; s32 results_min[4] = { }; s32 poll_results[4] = { }; @@ -1732,7 +1732,7 @@ static void b43_nphy_rev2_rssi_cal(struct b43_wldev *dev, u8 type) u8 regs_save_radio[2]; u16 regs_save_phy[2]; - s8 offset[4]; + s32 offset[4]; u8 core; u8 rail; -- cgit v1.2.3-70-g09d2 From 14109a59caf93e6eae726a34bf2f0897508ec8c1 Mon Sep 17 00:00:00 2001 From: Frank Li Date: Tue, 26 Mar 2013 16:12:03 +0000 Subject: enet: fec: fix fail resume from suspend state Without this patch 1. boot with nfs (no_console_suspend) 2. echo mem >/sys/power/state 3. wakeup by wakesource 4. print "eth0: tx queue full" This fix above problem by reinit bd queue at restart function Signed-off-by: Frank Li Signed-off-by: David S. Miller --- drivers/net/ethernet/freescale/fec.c | 82 ++++++++++++++++++++++-------------- 1 file changed, 50 insertions(+), 32 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/freescale/fec.c b/drivers/net/ethernet/freescale/fec.c index 911d0253dbb..f292c3aa423 100644 --- a/drivers/net/ethernet/freescale/fec.c +++ b/drivers/net/ethernet/freescale/fec.c @@ -345,6 +345,53 @@ fec_enet_start_xmit(struct sk_buff *skb, struct net_device *ndev) return NETDEV_TX_OK; } +/* Init RX & TX buffer descriptors + */ +static void fec_enet_bd_init(struct net_device *dev) +{ + struct fec_enet_private *fep = netdev_priv(dev); + struct bufdesc *bdp; + unsigned int i; + + /* Initialize the receive buffer descriptors. */ + bdp = fep->rx_bd_base; + for (i = 0; i < RX_RING_SIZE; i++) { + + /* Initialize the BD for every fragment in the page. */ + if (bdp->cbd_bufaddr) + bdp->cbd_sc = BD_ENET_RX_EMPTY; + else + bdp->cbd_sc = 0; + bdp = fec_enet_get_nextdesc(bdp, fep->bufdesc_ex); + } + + /* Set the last buffer to wrap */ + bdp = fec_enet_get_prevdesc(bdp, fep->bufdesc_ex); + bdp->cbd_sc |= BD_SC_WRAP; + + fep->cur_rx = fep->rx_bd_base; + + /* ...and the same for transmit */ + bdp = fep->tx_bd_base; + fep->cur_tx = bdp; + for (i = 0; i < TX_RING_SIZE; i++) { + + /* Initialize the BD for every fragment in the page. */ + bdp->cbd_sc = 0; + if (bdp->cbd_bufaddr && fep->tx_skbuff[i]) { + dev_kfree_skb_any(fep->tx_skbuff[i]); + fep->tx_skbuff[i] = NULL; + } + bdp->cbd_bufaddr = 0; + bdp = fec_enet_get_nextdesc(bdp, fep->bufdesc_ex); + } + + /* Set the last buffer to wrap */ + bdp = fec_enet_get_prevdesc(bdp, fep->bufdesc_ex); + bdp->cbd_sc |= BD_SC_WRAP; + fep->dirty_tx = bdp; +} + /* This function is called to start or restart the FEC during a link * change. This only happens when switching between half and full * duplex. @@ -388,6 +435,8 @@ fec_restart(struct net_device *ndev, int duplex) /* Set maximum receive buffer size. */ writel(PKT_MAXBLR_SIZE, fep->hwp + FEC_R_BUFF_SIZE); + fec_enet_bd_init(ndev); + /* Set receive and transmit descriptor base. */ writel(fep->bd_dma, fep->hwp + FEC_R_DES_START); if (fep->bufdesc_ex) @@ -397,7 +446,6 @@ fec_restart(struct net_device *ndev, int duplex) writel((unsigned long)fep->bd_dma + sizeof(struct bufdesc) * RX_RING_SIZE, fep->hwp + FEC_X_DES_START); - fep->cur_rx = fep->rx_bd_base; for (i = 0; i <= TX_RING_MOD_MASK; i++) { if (fep->tx_skbuff[i]) { @@ -1597,8 +1645,6 @@ static int fec_enet_init(struct net_device *ndev) { struct fec_enet_private *fep = netdev_priv(ndev); struct bufdesc *cbd_base; - struct bufdesc *bdp; - unsigned int i; /* Allocate memory for buffer descriptors. */ cbd_base = dma_alloc_coherent(NULL, PAGE_SIZE, &fep->bd_dma, @@ -1608,6 +1654,7 @@ static int fec_enet_init(struct net_device *ndev) return -ENOMEM; } + memset(cbd_base, 0, PAGE_SIZE); spin_lock_init(&fep->hw_lock); fep->netdev = ndev; @@ -1631,35 +1678,6 @@ static int fec_enet_init(struct net_device *ndev) writel(FEC_RX_DISABLED_IMASK, fep->hwp + FEC_IMASK); netif_napi_add(ndev, &fep->napi, fec_enet_rx_napi, FEC_NAPI_WEIGHT); - /* Initialize the receive buffer descriptors. */ - bdp = fep->rx_bd_base; - for (i = 0; i < RX_RING_SIZE; i++) { - - /* Initialize the BD for every fragment in the page. */ - bdp->cbd_sc = 0; - bdp = fec_enet_get_nextdesc(bdp, fep->bufdesc_ex); - } - - /* Set the last buffer to wrap */ - bdp = fec_enet_get_prevdesc(bdp, fep->bufdesc_ex); - bdp->cbd_sc |= BD_SC_WRAP; - - /* ...and the same for transmit */ - bdp = fep->tx_bd_base; - fep->cur_tx = bdp; - for (i = 0; i < TX_RING_SIZE; i++) { - - /* Initialize the BD for every fragment in the page. */ - bdp->cbd_sc = 0; - bdp->cbd_bufaddr = 0; - bdp = fec_enet_get_nextdesc(bdp, fep->bufdesc_ex); - } - - /* Set the last buffer to wrap */ - bdp = fec_enet_get_prevdesc(bdp, fep->bufdesc_ex); - bdp->cbd_sc |= BD_SC_WRAP; - fep->dirty_tx = bdp; - fec_restart(ndev, 0); return 0; -- cgit v1.2.3-70-g09d2 From b56d6b3fca6d1214dbc9c5655f26e5d4ec04afc8 Mon Sep 17 00:00:00 2001 From: Mugunthan V N Date: Wed, 27 Mar 2013 04:41:59 +0000 Subject: drivers: net: ethernet: cpsw: use netif_wake_queue() while restarting tx queue To restart tx queue use netif_wake_queue() intead of netif_start_queue() so that net schedule will restart transmission immediately which will increase network performance while doing huge data transfers. Reported-by: Dan Franke Suggested-by: Sriramakrishnan A G Signed-off-by: Mugunthan V N Acked-by: Eric Dumazet Signed-off-by: David S. Miller --- drivers/net/ethernet/ti/cpsw.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/ti/cpsw.c b/drivers/net/ethernet/ti/cpsw.c index df32a090d08..80cad06e5eb 100644 --- a/drivers/net/ethernet/ti/cpsw.c +++ b/drivers/net/ethernet/ti/cpsw.c @@ -436,7 +436,7 @@ void cpsw_tx_handler(void *token, int len, int status) * queue is stopped then start the queue as we have free desc for tx */ if (unlikely(netif_queue_stopped(ndev))) - netif_start_queue(ndev); + netif_wake_queue(ndev); cpts_tx_timestamp(priv->cpts, skb); priv->stats.tx_packets++; priv->stats.tx_bytes += len; -- cgit v1.2.3-70-g09d2 From 7e51cde276ca820d526c6c21cf8147df595a36bf Mon Sep 17 00:00:00 2001 From: Mugunthan V N Date: Wed, 27 Mar 2013 04:42:00 +0000 Subject: drivers: net: ethernet: davinci_emac: use netif_wake_queue() while restarting tx queue To restart tx queue use netif_wake_queue() intead of netif_start_queue() so that net schedule will restart transmission immediately which will increase network performance while doing huge data transfers. Reported-by: Dan Franke Suggested-by: Sriramakrishnan A G Signed-off-by: Mugunthan V N Acked-by: Eric Dumazet Signed-off-by: David S. Miller --- drivers/net/ethernet/ti/davinci_emac.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/ti/davinci_emac.c b/drivers/net/ethernet/ti/davinci_emac.c index ae1b77aa199..72300bc9e37 100644 --- a/drivers/net/ethernet/ti/davinci_emac.c +++ b/drivers/net/ethernet/ti/davinci_emac.c @@ -1053,7 +1053,7 @@ static void emac_tx_handler(void *token, int len, int status) * queue is stopped then start the queue as we have free desc for tx */ if (unlikely(netif_queue_stopped(ndev))) - netif_start_queue(ndev); + netif_wake_queue(ndev); ndev->stats.tx_packets++; ndev->stats.tx_bytes += len; dev_kfree_skb_any(skb); -- cgit v1.2.3-70-g09d2 From 715230a44310a8cf66fbfb5a46f9a62a9b2de424 Mon Sep 17 00:00:00 2001 From: Kees Cook Date: Wed, 27 Mar 2013 06:40:50 +0000 Subject: tg3: fix length overflow in VPD firmware parsing Commit 184b89044fb6e2a74611dafa69b1dce0d98612c6 ("tg3: Use VPD fw version when present") introduced VPD parsing that contained a potential length overflow. Limit the hardware's reported firmware string length (max 255 bytes) to stay inside the driver's firmware string length (32 bytes). On overflow, truncate the formatted firmware string instead of potentially overwriting portions of the tg3 struct. http://cansecwest.com/slides/2013/PrivateCore%20CSW%202013.pdf Signed-off-by: Kees Cook Reported-by: Oded Horovitz Reported-by: Brad Spengler Cc: stable@vger.kernel.org Cc: Matt Carlson Signed-off-by: David S. Miller --- drivers/net/ethernet/broadcom/tg3.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/broadcom/tg3.c b/drivers/net/ethernet/broadcom/tg3.c index 67d2663b397..17a972734ba 100644 --- a/drivers/net/ethernet/broadcom/tg3.c +++ b/drivers/net/ethernet/broadcom/tg3.c @@ -14604,8 +14604,11 @@ static void tg3_read_vpd(struct tg3 *tp) if (j + len > block_end) goto partno; - memcpy(tp->fw_ver, &vpd_data[j], len); - strncat(tp->fw_ver, " bc ", vpdlen - len - 1); + if (len >= sizeof(tp->fw_ver)) + len = sizeof(tp->fw_ver) - 1; + memset(tp->fw_ver, 0, sizeof(tp->fw_ver)); + snprintf(tp->fw_ver, sizeof(tp->fw_ver), "%.*s bc ", len, + &vpd_data[j]); } partno: -- cgit v1.2.3-70-g09d2 From b8730b403aee94db4631bfefb546a6ce8c287dc2 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Wed, 27 Mar 2013 20:49:58 +0100 Subject: iwlwifi: dvm: fix the passive-no-RX workaround Alex Romosan reported that since the mac80211 changes in "mac80211: start auth/assoc timeout on frame status" and the subsequent fixes in "mac80211: fix auth/assoc timeout handling" (commits 1672c0e31917 and 89afe614c0c) there's sometimes an issue connecting to a 5 GHz network with the iwlwifi DVM driver. The reason appears to be that since these commits any bad TX status makes mac80211 immediately try again, causing all of the authentication attempts to be quickly rejected by the firmware as it hasn't heard a beacon yet. Before, it would wait for the timeout regardless of status. To fix this, invoke the passive-no-RX workaround when not associated yet as well. This will cause the first frame to get lost, but then the driver will stop the queues and the second attempt will only be transmitted after hearing a beacon, thus delaying it appropriately to not make the firmware reject it again. Reported-by: Alex Romosan Tested-by: Alex Romosan Signed-off-by: Johannes Berg --- drivers/net/wireless/iwlwifi/dvm/rxon.c | 18 ++++++++---------- drivers/net/wireless/iwlwifi/dvm/tx.c | 2 +- 2 files changed, 9 insertions(+), 11 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/wireless/iwlwifi/dvm/rxon.c b/drivers/net/wireless/iwlwifi/dvm/rxon.c index 23be948cf16..a82b6b39d4f 100644 --- a/drivers/net/wireless/iwlwifi/dvm/rxon.c +++ b/drivers/net/wireless/iwlwifi/dvm/rxon.c @@ -1419,6 +1419,14 @@ void iwlagn_bss_info_changed(struct ieee80211_hw *hw, mutex_lock(&priv->mutex); + if (changes & BSS_CHANGED_IDLE && bss_conf->idle) { + /* + * If we go idle, then clearly no "passive-no-rx" + * workaround is needed any more, this is a reset. + */ + iwlagn_lift_passive_no_rx(priv); + } + if (unlikely(!iwl_is_ready(priv))) { IWL_DEBUG_MAC80211(priv, "leave - not ready\n"); mutex_unlock(&priv->mutex); @@ -1450,16 +1458,6 @@ void iwlagn_bss_info_changed(struct ieee80211_hw *hw, priv->timestamp = bss_conf->sync_tsf; ctx->staging.filter_flags |= RXON_FILTER_ASSOC_MSK; } else { - /* - * If we disassociate while there are pending - * frames, just wake up the queues and let the - * frames "escape" ... This shouldn't really - * be happening to start with, but we should - * not get stuck in this case either since it - * can happen if userspace gets confused. - */ - iwlagn_lift_passive_no_rx(priv); - ctx->staging.filter_flags &= ~RXON_FILTER_ASSOC_MSK; if (ctx->ctxid == IWL_RXON_CTX_BSS) diff --git a/drivers/net/wireless/iwlwifi/dvm/tx.c b/drivers/net/wireless/iwlwifi/dvm/tx.c index 6aec2df3bb2..d1a670d7b10 100644 --- a/drivers/net/wireless/iwlwifi/dvm/tx.c +++ b/drivers/net/wireless/iwlwifi/dvm/tx.c @@ -1192,7 +1192,7 @@ int iwlagn_rx_reply_tx(struct iwl_priv *priv, struct iwl_rx_cmd_buffer *rxb, memset(&info->status, 0, sizeof(info->status)); if (status == TX_STATUS_FAIL_PASSIVE_NO_RX && - iwl_is_associated_ctx(ctx) && ctx->vif && + ctx->vif && ctx->vif->type == NL80211_IFTYPE_STATION) { /* block and stop all queues */ priv->passive_no_rx = true; -- cgit v1.2.3-70-g09d2 From 9cfe8b156c21cf340b3a10ecb3022fbbc1c39185 Mon Sep 17 00:00:00 2001 From: Mirko Lindner Date: Tue, 26 Mar 2013 06:38:35 +0000 Subject: sky2: Receive Overflows not counted The sky2 driver doesn't count the Receive Overflows because the MAC interrupt for this event is not set in the MAC's interrupt mask. The MAC's interrupt mask is set only for Transmit FIFO Underruns. Fix: The correct setting should be (GM_IS_TX_FF_UR | GM_IS_RX_FF_OR) Otherwise the Receive Overflow event will not generate any interrupt. The Receive Overflow interrupt is handled correctly Signed-off-by: Mirko Lindner Acked-by: Stephen Hemminger Signed-off-by: David S. Miller --- drivers/net/ethernet/marvell/sky2.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/marvell/sky2.h b/drivers/net/ethernet/marvell/sky2.h index 615ac63ea86..ec6dcd80152 100644 --- a/drivers/net/ethernet/marvell/sky2.h +++ b/drivers/net/ethernet/marvell/sky2.h @@ -2074,7 +2074,7 @@ enum { GM_IS_RX_FF_OR = 1<<1, /* Receive FIFO Overrun */ GM_IS_RX_COMPL = 1<<0, /* Frame Reception Complete */ -#define GMAC_DEF_MSK GM_IS_TX_FF_UR +#define GMAC_DEF_MSK (GM_IS_TX_FF_UR | GM_IS_RX_FF_OR) }; /* GMAC_LINK_CTRL 16 bit GMAC Link Control Reg (YUKON only) */ -- cgit v1.2.3-70-g09d2 From 74f9f42c1c1650e74fb464f76644c9041f996851 Mon Sep 17 00:00:00 2001 From: Mirko Lindner Date: Tue, 26 Mar 2013 06:38:42 +0000 Subject: sky2: Threshold for Pause Packet is set wrong The sky2 driver sets the Rx Upper Threshold for Pause Packet generation to a wrong value which leads to only 2kB of RAM remaining space. This can lead to Rx overflow errors even with activated flow-control. Fix: We should increase the value to 8192/8 Signed-off-by: Mirko Lindner Acked-by: Stephen Hemminger Signed-off-by: David S. Miller --- drivers/net/ethernet/marvell/sky2.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/marvell/sky2.c b/drivers/net/ethernet/marvell/sky2.c index fc07ca35721..6a0e671fcec 100644 --- a/drivers/net/ethernet/marvell/sky2.c +++ b/drivers/net/ethernet/marvell/sky2.c @@ -1067,7 +1067,7 @@ static void sky2_ramset(struct sky2_hw *hw, u16 q, u32 start, u32 space) sky2_write32(hw, RB_ADDR(q, RB_RX_UTHP), tp); sky2_write32(hw, RB_ADDR(q, RB_RX_LTHP), space/2); - tp = space - 2048/8; + tp = space - 8192/8; sky2_write32(hw, RB_ADDR(q, RB_RX_UTPP), tp); sky2_write32(hw, RB_ADDR(q, RB_RX_LTPP), space/4); } else { -- cgit v1.2.3-70-g09d2 From 1bc7db16782c2a581fb4d53ca853631050f31611 Mon Sep 17 00:00:00 2001 From: "nikolay@redhat.com" Date: Wed, 27 Mar 2013 03:32:41 +0000 Subject: bonding: fix disabling of arp_interval and miimon Currently if either arp_interval or miimon is disabled, they both get disabled, and upon disabling they get executed once more which is not the proper behaviour. Also when doing a no-op and disabling an already disabled one, the other again gets disabled. Also fix the error messages with the proper valid ranges, and a small typo fix in the up delay error message (outputting "down delay", instead of "up delay"). Signed-off-by: Nikolay Aleksandrov Signed-off-by: David S. Miller --- drivers/net/bonding/bond_sysfs.c | 92 +++++++++++++++++++++------------------- 1 file changed, 48 insertions(+), 44 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/bonding/bond_sysfs.c b/drivers/net/bonding/bond_sysfs.c index db103e03ba0..ea7a388f484 100644 --- a/drivers/net/bonding/bond_sysfs.c +++ b/drivers/net/bonding/bond_sysfs.c @@ -527,7 +527,7 @@ static ssize_t bonding_store_arp_interval(struct device *d, goto out; } if (new_value < 0) { - pr_err("%s: Invalid arp_interval value %d not in range 1-%d; rejected.\n", + pr_err("%s: Invalid arp_interval value %d not in range 0-%d; rejected.\n", bond->dev->name, new_value, INT_MAX); ret = -EINVAL; goto out; @@ -542,14 +542,15 @@ static ssize_t bonding_store_arp_interval(struct device *d, pr_info("%s: Setting ARP monitoring interval to %d.\n", bond->dev->name, new_value); bond->params.arp_interval = new_value; - if (bond->params.miimon) { - pr_info("%s: ARP monitoring cannot be used with MII monitoring. %s Disabling MII monitoring.\n", - bond->dev->name, bond->dev->name); - bond->params.miimon = 0; - } - if (!bond->params.arp_targets[0]) { - pr_info("%s: ARP monitoring has been set up, but no ARP targets have been specified.\n", - bond->dev->name); + if (new_value) { + if (bond->params.miimon) { + pr_info("%s: ARP monitoring cannot be used with MII monitoring. %s Disabling MII monitoring.\n", + bond->dev->name, bond->dev->name); + bond->params.miimon = 0; + } + if (!bond->params.arp_targets[0]) + pr_info("%s: ARP monitoring has been set up, but no ARP targets have been specified.\n", + bond->dev->name); } if (bond->dev->flags & IFF_UP) { /* If the interface is up, we may need to fire off @@ -557,10 +558,13 @@ static ssize_t bonding_store_arp_interval(struct device *d, * timer will get fired off when the open function * is called. */ - cancel_delayed_work_sync(&bond->mii_work); - queue_delayed_work(bond->wq, &bond->arp_work, 0); + if (!new_value) { + cancel_delayed_work_sync(&bond->arp_work); + } else { + cancel_delayed_work_sync(&bond->mii_work); + queue_delayed_work(bond->wq, &bond->arp_work, 0); + } } - out: rtnl_unlock(); return ret; @@ -702,7 +706,7 @@ static ssize_t bonding_store_downdelay(struct device *d, } if (new_value < 0) { pr_err("%s: Invalid down delay value %d not in range %d-%d; rejected.\n", - bond->dev->name, new_value, 1, INT_MAX); + bond->dev->name, new_value, 0, INT_MAX); ret = -EINVAL; goto out; } else { @@ -757,8 +761,8 @@ static ssize_t bonding_store_updelay(struct device *d, goto out; } if (new_value < 0) { - pr_err("%s: Invalid down delay value %d not in range %d-%d; rejected.\n", - bond->dev->name, new_value, 1, INT_MAX); + pr_err("%s: Invalid up delay value %d not in range %d-%d; rejected.\n", + bond->dev->name, new_value, 0, INT_MAX); ret = -EINVAL; goto out; } else { @@ -968,37 +972,37 @@ static ssize_t bonding_store_miimon(struct device *d, } if (new_value < 0) { pr_err("%s: Invalid miimon value %d not in range %d-%d; rejected.\n", - bond->dev->name, new_value, 1, INT_MAX); + bond->dev->name, new_value, 0, INT_MAX); ret = -EINVAL; goto out; - } else { - pr_info("%s: Setting MII monitoring interval to %d.\n", - bond->dev->name, new_value); - bond->params.miimon = new_value; - if (bond->params.updelay) - pr_info("%s: Note: Updating updelay (to %d) since it is a multiple of the miimon value.\n", - bond->dev->name, - bond->params.updelay * bond->params.miimon); - if (bond->params.downdelay) - pr_info("%s: Note: Updating downdelay (to %d) since it is a multiple of the miimon value.\n", - bond->dev->name, - bond->params.downdelay * bond->params.miimon); - if (bond->params.arp_interval) { - pr_info("%s: MII monitoring cannot be used with ARP monitoring. Disabling ARP monitoring...\n", - bond->dev->name); - bond->params.arp_interval = 0; - if (bond->params.arp_validate) { - bond->params.arp_validate = - BOND_ARP_VALIDATE_NONE; - } - } - - if (bond->dev->flags & IFF_UP) { - /* If the interface is up, we may need to fire off - * the MII timer. If the interface is down, the - * timer will get fired off when the open function - * is called. - */ + } + pr_info("%s: Setting MII monitoring interval to %d.\n", + bond->dev->name, new_value); + bond->params.miimon = new_value; + if (bond->params.updelay) + pr_info("%s: Note: Updating updelay (to %d) since it is a multiple of the miimon value.\n", + bond->dev->name, + bond->params.updelay * bond->params.miimon); + if (bond->params.downdelay) + pr_info("%s: Note: Updating downdelay (to %d) since it is a multiple of the miimon value.\n", + bond->dev->name, + bond->params.downdelay * bond->params.miimon); + if (new_value && bond->params.arp_interval) { + pr_info("%s: MII monitoring cannot be used with ARP monitoring. Disabling ARP monitoring...\n", + bond->dev->name); + bond->params.arp_interval = 0; + if (bond->params.arp_validate) + bond->params.arp_validate = BOND_ARP_VALIDATE_NONE; + } + if (bond->dev->flags & IFF_UP) { + /* If the interface is up, we may need to fire off + * the MII timer. If the interface is down, the + * timer will get fired off when the open function + * is called. + */ + if (!new_value) { + cancel_delayed_work_sync(&bond->mii_work); + } else { cancel_delayed_work_sync(&bond->arp_work); queue_delayed_work(bond->wq, &bond->mii_work, 0); } -- cgit v1.2.3-70-g09d2 From 4c51e53689569398d656e631c17308d9b8e84650 Mon Sep 17 00:00:00 2001 From: Steve Glendinning Date: Thu, 28 Mar 2013 02:34:41 +0000 Subject: smsc75xx: fix jumbo frame support This patch enables RX of jumbo frames for LAN7500. Previously the driver would transmit jumbo frames succesfully but would drop received jumbo frames (incrementing the interface errors count). With this patch applied the device can succesfully receive jumbo frames up to MTU 9000 (9014 bytes on the wire including ethernet header). Signed-off-by: Steve Glendinning Signed-off-by: David S. Miller --- drivers/net/usb/smsc75xx.c | 12 ++++++++---- 1 file changed, 8 insertions(+), 4 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/usb/smsc75xx.c b/drivers/net/usb/smsc75xx.c index 9abe51710f2..1a15ec14c38 100644 --- a/drivers/net/usb/smsc75xx.c +++ b/drivers/net/usb/smsc75xx.c @@ -914,8 +914,12 @@ static int smsc75xx_set_rx_max_frame_length(struct usbnet *dev, int size) static int smsc75xx_change_mtu(struct net_device *netdev, int new_mtu) { struct usbnet *dev = netdev_priv(netdev); + int ret; + + if (new_mtu > MAX_SINGLE_PACKET_SIZE) + return -EINVAL; - int ret = smsc75xx_set_rx_max_frame_length(dev, new_mtu); + ret = smsc75xx_set_rx_max_frame_length(dev, new_mtu + ETH_HLEN); if (ret < 0) { netdev_warn(dev->net, "Failed to set mac rx frame length\n"); return ret; @@ -1324,7 +1328,7 @@ static int smsc75xx_reset(struct usbnet *dev) netif_dbg(dev, ifup, dev->net, "FCT_TX_CTL set to 0x%08x\n", buf); - ret = smsc75xx_set_rx_max_frame_length(dev, 1514); + ret = smsc75xx_set_rx_max_frame_length(dev, dev->net->mtu + ETH_HLEN); if (ret < 0) { netdev_warn(dev->net, "Failed to set max rx frame length\n"); return ret; @@ -2134,8 +2138,8 @@ static int smsc75xx_rx_fixup(struct usbnet *dev, struct sk_buff *skb) else if (rx_cmd_a & (RX_CMD_A_LONG | RX_CMD_A_RUNT)) dev->net->stats.rx_frame_errors++; } else { - /* ETH_FRAME_LEN + 4(CRC) + 2(COE) + 4(Vlan) */ - if (unlikely(size > (ETH_FRAME_LEN + 12))) { + /* MAX_SINGLE_PACKET_SIZE + 4(CRC) + 2(COE) + 4(Vlan) */ + if (unlikely(size > (MAX_SINGLE_PACKET_SIZE + ETH_HLEN + 12))) { netif_dbg(dev, rx_err, dev->net, "size err rx_cmd_a=0x%08x\n", rx_cmd_a); -- cgit v1.2.3-70-g09d2 From dc574f1d52d893f516f3786ff7635450bac00eef Mon Sep 17 00:00:00 2001 From: Rob Herring Date: Thu, 28 Mar 2013 11:32:44 +0000 Subject: net: calxedaxgmac: fix rx ring handling when OOM If skb allocation for the rx ring fails repeatedly, we can reach a point were the ring is empty. In this condition, the driver is out of sync with the h/w. While this has always been possible, the removal of the skb recycling seems to have made triggering this problem easier. Signed-off-by: Rob Herring Signed-off-by: David S. Miller --- drivers/net/ethernet/calxeda/xgmac.c | 3 +++ 1 file changed, 3 insertions(+) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/calxeda/xgmac.c b/drivers/net/ethernet/calxeda/xgmac.c index a170065b597..bb1e80bfa78 100644 --- a/drivers/net/ethernet/calxeda/xgmac.c +++ b/drivers/net/ethernet/calxeda/xgmac.c @@ -1141,6 +1141,9 @@ static int xgmac_rx(struct xgmac_priv *priv, int limit) struct sk_buff *skb; int frame_len; + if (!dma_ring_cnt(priv->rx_head, priv->rx_tail, DMA_RX_RING_SZ)) + break; + entry = priv->rx_tail; p = priv->dma_rx + entry; if (desc_get_owner(p)) -- cgit v1.2.3-70-g09d2 From e6c3827dcfe53dd78b824d2ee4007a216ada739e Mon Sep 17 00:00:00 2001 From: Rob Herring Date: Thu, 28 Mar 2013 11:32:45 +0000 Subject: net: calxedaxgmac: Wake-on-LAN fixes WOL is broken because the magic packet status bit is getting set rather than the enable bit. The PMT interrupt is not getting serviced because the PMT interrupt is also enabled on the global interrupt, but not cleared by the global interrupt and the global interrupt is higher priority. This fixes both of these issues to get WOL working. There's still a problem with receive after resume, but at least now we can wake-up. Signed-off-by: Rob Herring Signed-off-by: David S. Miller --- drivers/net/ethernet/calxeda/xgmac.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/calxeda/xgmac.c b/drivers/net/ethernet/calxeda/xgmac.c index bb1e80bfa78..b0ebc9f6d55 100644 --- a/drivers/net/ethernet/calxeda/xgmac.c +++ b/drivers/net/ethernet/calxeda/xgmac.c @@ -163,6 +163,7 @@ #define XGMAC_FLOW_CTRL_FCB_BPA 0x00000001 /* Flow Control Busy ... */ /* XGMAC_INT_STAT reg */ +#define XGMAC_INT_STAT_PMTIM 0x00800000 /* PMT Interrupt Mask */ #define XGMAC_INT_STAT_PMT 0x0080 /* PMT Interrupt Status */ #define XGMAC_INT_STAT_LPI 0x0040 /* LPI Interrupt Status */ @@ -960,6 +961,9 @@ static int xgmac_hw_init(struct net_device *dev) writel(DMA_INTR_DEFAULT_MASK, ioaddr + XGMAC_DMA_STATUS); writel(DMA_INTR_DEFAULT_MASK, ioaddr + XGMAC_DMA_INTR_ENA); + /* Mask power mgt interrupt */ + writel(XGMAC_INT_STAT_PMTIM, ioaddr + XGMAC_INT_STAT); + /* XGMAC requires AXI bus init. This is a 'magic number' for now */ writel(0x0077000E, ioaddr + XGMAC_DMA_AXI_BUS); @@ -1828,7 +1832,7 @@ static void xgmac_pmt(void __iomem *ioaddr, unsigned long mode) unsigned int pmt = 0; if (mode & WAKE_MAGIC) - pmt |= XGMAC_PMT_POWERDOWN | XGMAC_PMT_MAGIC_PKT; + pmt |= XGMAC_PMT_POWERDOWN | XGMAC_PMT_MAGIC_PKT_EN; if (mode & WAKE_UCAST) pmt |= XGMAC_PMT_POWERDOWN | XGMAC_PMT_GLBL_UNICAST; -- cgit v1.2.3-70-g09d2 From 188ab1b105c96656f6bcfb49d0d8bb1b1936b632 Mon Sep 17 00:00:00 2001 From: Hannes Frederic Sowa Date: Thu, 28 Mar 2013 18:10:50 +0000 Subject: atl1e: drop pci-msi support because of packet corruption MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Usage of pci-msi results in corrupted dma packet transfers to the host. Reported-by: rebelyouth Cc: Huang, Xiong Tested-by: Christian Sünkenberg Signed-off-by: Hannes Frederic Sowa Signed-off-by: David S. Miller --- drivers/net/ethernet/atheros/atl1e/atl1e.h | 1 - drivers/net/ethernet/atheros/atl1e/atl1e_main.c | 19 ++----------------- 2 files changed, 2 insertions(+), 18 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/atheros/atl1e/atl1e.h b/drivers/net/ethernet/atheros/atl1e/atl1e.h index 829b5ad71d0..edfdf6b950e 100644 --- a/drivers/net/ethernet/atheros/atl1e/atl1e.h +++ b/drivers/net/ethernet/atheros/atl1e/atl1e.h @@ -438,7 +438,6 @@ struct atl1e_adapter { struct atl1e_hw hw; struct atl1e_hw_stats hw_stats; - bool have_msi; u32 wol; u16 link_speed; u16 link_duplex; diff --git a/drivers/net/ethernet/atheros/atl1e/atl1e_main.c b/drivers/net/ethernet/atheros/atl1e/atl1e_main.c index 92f4734f860..f73d5609439 100644 --- a/drivers/net/ethernet/atheros/atl1e/atl1e_main.c +++ b/drivers/net/ethernet/atheros/atl1e/atl1e_main.c @@ -1849,34 +1849,19 @@ static void atl1e_free_irq(struct atl1e_adapter *adapter) struct net_device *netdev = adapter->netdev; free_irq(adapter->pdev->irq, netdev); - - if (adapter->have_msi) - pci_disable_msi(adapter->pdev); } static int atl1e_request_irq(struct atl1e_adapter *adapter) { struct pci_dev *pdev = adapter->pdev; struct net_device *netdev = adapter->netdev; - int flags = 0; int err = 0; - adapter->have_msi = true; - err = pci_enable_msi(pdev); - if (err) { - netdev_dbg(netdev, - "Unable to allocate MSI interrupt Error: %d\n", err); - adapter->have_msi = false; - } - - if (!adapter->have_msi) - flags |= IRQF_SHARED; - err = request_irq(pdev->irq, atl1e_intr, flags, netdev->name, netdev); + err = request_irq(pdev->irq, atl1e_intr, IRQF_SHARED, netdev->name, + netdev); if (err) { netdev_dbg(adapter->netdev, "Unable to allocate interrupt Error: %d\n", err); - if (adapter->have_msi) - pci_disable_msi(pdev); return err; } netdev_dbg(netdev, "atl1e_request_irq OK\n"); -- cgit v1.2.3-70-g09d2 From 14bc435ea54cb888409efb54fc6b76c13ef530e9 Mon Sep 17 00:00:00 2001 From: "Max.Nekludov@us.elster.com" Date: Fri, 29 Mar 2013 05:27:36 +0000 Subject: ks8851: Fix interpretation of rxlen field. According to the Datasheet (page 52): 15-12 Reserved 11-0 RXBC Receive Byte Count This field indicates the present received frame byte size. The code has a bug: rxh = ks8851_rdreg32(ks, KS_RXFHSR); rxstat = rxh & 0xffff; rxlen = rxh >> 16; // BUG!!! 0xFFF mask should be applied Signed-off-by: Max Nekludov Signed-off-by: David S. Miller --- drivers/net/ethernet/micrel/ks8851.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/micrel/ks8851.c b/drivers/net/ethernet/micrel/ks8851.c index 33bcb63d56a..8fb481252e2 100644 --- a/drivers/net/ethernet/micrel/ks8851.c +++ b/drivers/net/ethernet/micrel/ks8851.c @@ -528,7 +528,7 @@ static void ks8851_rx_pkts(struct ks8851_net *ks) for (; rxfc != 0; rxfc--) { rxh = ks8851_rdreg32(ks, KS_RXFHSR); rxstat = rxh & 0xffff; - rxlen = rxh >> 16; + rxlen = (rxh >> 16) & 0xfff; netif_dbg(ks, rx_status, ks->netdev, "rx: stat 0x%04x, len 0x%04x\n", rxstat, rxlen); -- cgit v1.2.3-70-g09d2 From 1e1b812bbe1069fc8e2e372dca7d5f541c7a8ceb Mon Sep 17 00:00:00 2001 From: Sergei Shtylyov Date: Sun, 31 Mar 2013 09:50:07 +0000 Subject: sh_eth: fix handling of no LINK signal The code handling the absent LINK signal (or the absent PSR register -- which reflects the state of this signal) is quite naive and has probably never really worked. It's probably enough to say that this code is executed only on the LINK change interrupt (sic!) but even if we actually have the signal and choose to ignore it (it might be connected to PHY's link/activity LED output as on the Renesas BOCK-W board), sh_eth_adjust_link() on which this code relies to update 'mdp->link' gets executed later than the LINK change interrupt where it is checked, and so RX/TX never get enabled via ECMR register. So, ignore the LINK changed interrupt iff LINK signal is absent (or just chosen not to be used) or PSR register is absent, and enable/disable RX/TX directly in sh_eth_adjust_link() in this case. Signed-off-by: Sergei Shtylyov Signed-off-by: David S. Miller --- drivers/net/ethernet/renesas/sh_eth.c | 10 ++++++---- 1 file changed, 6 insertions(+), 4 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/renesas/sh_eth.c b/drivers/net/ethernet/renesas/sh_eth.c index bf5e3cf97c4..1ca8b2b10ad 100644 --- a/drivers/net/ethernet/renesas/sh_eth.c +++ b/drivers/net/ethernet/renesas/sh_eth.c @@ -1216,10 +1216,7 @@ static void sh_eth_error(struct net_device *ndev, int intr_status) if (felic_stat & ECSR_LCHNG) { /* Link Changed */ if (mdp->cd->no_psr || mdp->no_ether_link) { - if (mdp->link == PHY_DOWN) - link_stat = 0; - else - link_stat = PHY_ST_LINK; + goto ignore_link; } else { link_stat = (sh_eth_read(ndev, PSR)); if (mdp->ether_link_active_low) @@ -1242,6 +1239,7 @@ static void sh_eth_error(struct net_device *ndev, int intr_status) } } +ignore_link: if (intr_status & EESR_TWB) { /* Write buck end. unused write back interrupt */ if (intr_status & EESR_TABT) /* Transmit Abort int */ @@ -1392,12 +1390,16 @@ static void sh_eth_adjust_link(struct net_device *ndev) (sh_eth_read(ndev, ECMR) & ~ECMR_TXF), ECMR); new_state = 1; mdp->link = phydev->link; + if (mdp->cd->no_psr || mdp->no_ether_link) + sh_eth_rcv_snd_enable(ndev); } } else if (mdp->link) { new_state = 1; mdp->link = PHY_DOWN; mdp->speed = 0; mdp->duplex = -1; + if (mdp->cd->no_psr || mdp->no_ether_link) + sh_eth_rcv_snd_disable(ndev); } if (new_state && netif_msg_link(mdp)) -- cgit v1.2.3-70-g09d2 From 3893b27345ac0ff13c1b9ec20ad50966b810997e Mon Sep 17 00:00:00 2001 From: Sergei Shtylyov Date: Sun, 31 Mar 2013 09:54:20 +0000 Subject: sh_eth: workaround for spurious ECI interrupt At least on Renesas R8A7778, EESR.ECI interrupt seems to fire regardless of its mask in EESIPR register. I can 100% reproduce it with the following scenario: target is booted with 'ip=on' option, and so IP-Config opens SoC Ether device but doesn't get a proper reply and then succeeds with on-board SMC chip; then I login and try to bring up the SoC Ether device with 'ifconfig', and I get an ECI interrupt once request_irq() is called by sh_eth_open() (while interrupt mask in EESIPR register is all 0), if that interrupt is accompanied by a pending EESR.FRC (frame receive completion) interrupt, I get kernel oops in sh_eth_rx() because sh_eth_ring_init() hasn't been called yet! The solution I worked out is the following: in sh_eth_interrupt(), mask the interrupt status from EESR register with the interrupt mask from EESIPR register in order not to handle the disabled interrupts -- but forcing EESIPR.M_ECI bit in this mask set because we always need to fully handle EESR.ECI interrupt in sh_eth_error() in order to quench it (as it doesn't get cleared by just writing 1 to the this bit as all the other interrupts). While at it, remove unneeded initializer for 'intr_status' variable and give it *unsigned long* type, matching the type of sh_eth_read()'s result; fix comment. Signed-off-by: Sergei Shtylyov Reviewed-by: Max Filippov Signed-off-by: David S. Miller --- drivers/net/ethernet/renesas/sh_eth.c | 10 ++++++++-- 1 file changed, 8 insertions(+), 2 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/renesas/sh_eth.c b/drivers/net/ethernet/renesas/sh_eth.c index 1ca8b2b10ad..44f7904e505 100644 --- a/drivers/net/ethernet/renesas/sh_eth.c +++ b/drivers/net/ethernet/renesas/sh_eth.c @@ -1324,12 +1324,18 @@ static irqreturn_t sh_eth_interrupt(int irq, void *netdev) struct sh_eth_private *mdp = netdev_priv(ndev); struct sh_eth_cpu_data *cd = mdp->cd; irqreturn_t ret = IRQ_NONE; - u32 intr_status = 0; + unsigned long intr_status; spin_lock(&mdp->lock); - /* Get interrpt stat */ + /* Get interrupt status */ intr_status = sh_eth_read(ndev, EESR); + /* Mask it with the interrupt mask, forcing ECI interrupt to be always + * enabled since it's the one that comes thru regardless of the mask, + * and we need to fully handle it in sh_eth_error() in order to quench + * it as it doesn't get cleared by just writing 1 to the ECI bit... + */ + intr_status &= sh_eth_read(ndev, EESIPR) | DMAC_M_ECI; /* Clear interrupt */ if (intr_status & (EESR_FRC | EESR_RMAF | EESR_RRF | EESR_RTLF | EESR_RTSF | EESR_PRE | EESR_CERF | -- cgit v1.2.3-70-g09d2 From 3340d2aae3433ad9147f6bf0adc452b324e31591 Mon Sep 17 00:00:00 2001 From: Sergei Shtylyov Date: Sun, 31 Mar 2013 10:11:04 +0000 Subject: sh_eth: make 'link' field of 'struct sh_eth_private' *int* The 'link' field of 'struct sh_eth_private' has type 'enum phy_state' while the 'link' field of 'struct phy_device' is merely *int* (having values 0 and 1) and the former field gets assigned from the latter. Make the field match, getting rid of incorrectly used PHY_DOWN value in assignments/comparisons. Signed-off-by: Sergei Shtylyov Signed-off-by: David S. Miller --- drivers/net/ethernet/renesas/sh_eth.c | 8 ++++---- drivers/net/ethernet/renesas/sh_eth.h | 2 +- 2 files changed, 5 insertions(+), 5 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/renesas/sh_eth.c b/drivers/net/ethernet/renesas/sh_eth.c index 44f7904e505..6ed333fe5c0 100644 --- a/drivers/net/ethernet/renesas/sh_eth.c +++ b/drivers/net/ethernet/renesas/sh_eth.c @@ -1377,7 +1377,7 @@ static void sh_eth_adjust_link(struct net_device *ndev) struct phy_device *phydev = mdp->phydev; int new_state = 0; - if (phydev->link != PHY_DOWN) { + if (phydev->link) { if (phydev->duplex != mdp->duplex) { new_state = 1; mdp->duplex = phydev->duplex; @@ -1391,7 +1391,7 @@ static void sh_eth_adjust_link(struct net_device *ndev) if (mdp->cd->set_rate) mdp->cd->set_rate(ndev); } - if (mdp->link == PHY_DOWN) { + if (!mdp->link) { sh_eth_write(ndev, (sh_eth_read(ndev, ECMR) & ~ECMR_TXF), ECMR); new_state = 1; @@ -1401,7 +1401,7 @@ static void sh_eth_adjust_link(struct net_device *ndev) } } else if (mdp->link) { new_state = 1; - mdp->link = PHY_DOWN; + mdp->link = 0; mdp->speed = 0; mdp->duplex = -1; if (mdp->cd->no_psr || mdp->no_ether_link) @@ -1422,7 +1422,7 @@ static int sh_eth_phy_init(struct net_device *ndev) snprintf(phy_id, sizeof(phy_id), PHY_ID_FMT, mdp->mii_bus->id , mdp->phy_id); - mdp->link = PHY_DOWN; + mdp->link = 0; mdp->speed = 0; mdp->duplex = -1; diff --git a/drivers/net/ethernet/renesas/sh_eth.h b/drivers/net/ethernet/renesas/sh_eth.h index e6655678458..828be451500 100644 --- a/drivers/net/ethernet/renesas/sh_eth.h +++ b/drivers/net/ethernet/renesas/sh_eth.h @@ -723,7 +723,7 @@ struct sh_eth_private { u32 phy_id; /* PHY ID */ struct mii_bus *mii_bus; /* MDIO bus control */ struct phy_device *phydev; /* PHY device control */ - enum phy_state link; + int link; phy_interface_t phy_interface; int msg_enable; int speed; -- cgit v1.2.3-70-g09d2 From 6741f40d198c6a5feb23653a1efd4ca47f93d83d Mon Sep 17 00:00:00 2001 From: Joseph CHANG Date: Thu, 28 Mar 2013 23:13:42 +0000 Subject: DM9000B: driver initialization upgrade Fix bug for DM9000 revision B which contain a DSP PHY DM9000B use DSP PHY instead previouse DM9000 revisions' analog PHY, So need extra change in initialization, For explicity PHY Reset and PHY init parameter, and first DM9000_NCR reset need NCR_MAC_LBK bit by dm9000_probe(). Following DM9000_NCR reset cause by dm9000_open() clear the NCR_MAC_LBK bit. Without this fix, Power-up FIFO pointers error happen around 2% rate among Davicom's customers' boards. With this fix, All above cases can be solved. Signed-off-by: Joseph CHANG Signed-off-by: David S. Miller --- drivers/net/ethernet/davicom/dm9000.c | 214 +++++++++++++++++----------------- drivers/net/ethernet/davicom/dm9000.h | 11 +- 2 files changed, 120 insertions(+), 105 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/davicom/dm9000.c b/drivers/net/ethernet/davicom/dm9000.c index 8cdf02503d1..9eada8e8607 100644 --- a/drivers/net/ethernet/davicom/dm9000.c +++ b/drivers/net/ethernet/davicom/dm9000.c @@ -257,6 +257,107 @@ static void dm9000_dumpblk_32bit(void __iomem *reg, int count) tmp = readl(reg); } +/* + * Sleep, either by using msleep() or if we are suspending, then + * use mdelay() to sleep. + */ +static void dm9000_msleep(board_info_t *db, unsigned int ms) +{ + if (db->in_suspend) + mdelay(ms); + else + msleep(ms); +} + +/* Read a word from phyxcer */ +static int +dm9000_phy_read(struct net_device *dev, int phy_reg_unused, int reg) +{ + board_info_t *db = netdev_priv(dev); + unsigned long flags; + unsigned int reg_save; + int ret; + + mutex_lock(&db->addr_lock); + + spin_lock_irqsave(&db->lock, flags); + + /* Save previous register address */ + reg_save = readb(db->io_addr); + + /* Fill the phyxcer register into REG_0C */ + iow(db, DM9000_EPAR, DM9000_PHY | reg); + + /* Issue phyxcer read command */ + iow(db, DM9000_EPCR, EPCR_ERPRR | EPCR_EPOS); + + writeb(reg_save, db->io_addr); + spin_unlock_irqrestore(&db->lock, flags); + + dm9000_msleep(db, 1); /* Wait read complete */ + + spin_lock_irqsave(&db->lock, flags); + reg_save = readb(db->io_addr); + + iow(db, DM9000_EPCR, 0x0); /* Clear phyxcer read command */ + + /* The read data keeps on REG_0D & REG_0E */ + ret = (ior(db, DM9000_EPDRH) << 8) | ior(db, DM9000_EPDRL); + + /* restore the previous address */ + writeb(reg_save, db->io_addr); + spin_unlock_irqrestore(&db->lock, flags); + + mutex_unlock(&db->addr_lock); + + dm9000_dbg(db, 5, "phy_read[%02x] -> %04x\n", reg, ret); + return ret; +} + +/* Write a word to phyxcer */ +static void +dm9000_phy_write(struct net_device *dev, + int phyaddr_unused, int reg, int value) +{ + board_info_t *db = netdev_priv(dev); + unsigned long flags; + unsigned long reg_save; + + dm9000_dbg(db, 5, "phy_write[%02x] = %04x\n", reg, value); + mutex_lock(&db->addr_lock); + + spin_lock_irqsave(&db->lock, flags); + + /* Save previous register address */ + reg_save = readb(db->io_addr); + + /* Fill the phyxcer register into REG_0C */ + iow(db, DM9000_EPAR, DM9000_PHY | reg); + + /* Fill the written data into REG_0D & REG_0E */ + iow(db, DM9000_EPDRL, value); + iow(db, DM9000_EPDRH, value >> 8); + + /* Issue phyxcer write command */ + iow(db, DM9000_EPCR, EPCR_EPOS | EPCR_ERPRW); + + writeb(reg_save, db->io_addr); + spin_unlock_irqrestore(&db->lock, flags); + + dm9000_msleep(db, 1); /* Wait write complete */ + + spin_lock_irqsave(&db->lock, flags); + reg_save = readb(db->io_addr); + + iow(db, DM9000_EPCR, 0x0); /* Clear phyxcer write command */ + + /* restore the previous address */ + writeb(reg_save, db->io_addr); + + spin_unlock_irqrestore(&db->lock, flags); + mutex_unlock(&db->addr_lock); +} + /* dm9000_set_io * * select the specified set of io routines to use with the @@ -795,6 +896,9 @@ dm9000_init_dm9000(struct net_device *dev) iow(db, DM9000_GPCR, GPCR_GEP_CNTL); /* Let GPIO0 output */ + dm9000_phy_write(dev, 0, MII_BMCR, BMCR_RESET); /* PHY RESET */ + dm9000_phy_write(dev, 0, MII_DM_DSPCR, DSPCR_INIT_PARAM); /* Init */ + ncr = (db->flags & DM9000_PLATF_EXT_PHY) ? NCR_EXT_PHY : 0; /* if wol is needed, then always set NCR_WAKEEN otherwise we end @@ -1201,109 +1305,6 @@ dm9000_open(struct net_device *dev) return 0; } -/* - * Sleep, either by using msleep() or if we are suspending, then - * use mdelay() to sleep. - */ -static void dm9000_msleep(board_info_t *db, unsigned int ms) -{ - if (db->in_suspend) - mdelay(ms); - else - msleep(ms); -} - -/* - * Read a word from phyxcer - */ -static int -dm9000_phy_read(struct net_device *dev, int phy_reg_unused, int reg) -{ - board_info_t *db = netdev_priv(dev); - unsigned long flags; - unsigned int reg_save; - int ret; - - mutex_lock(&db->addr_lock); - - spin_lock_irqsave(&db->lock,flags); - - /* Save previous register address */ - reg_save = readb(db->io_addr); - - /* Fill the phyxcer register into REG_0C */ - iow(db, DM9000_EPAR, DM9000_PHY | reg); - - iow(db, DM9000_EPCR, EPCR_ERPRR | EPCR_EPOS); /* Issue phyxcer read command */ - - writeb(reg_save, db->io_addr); - spin_unlock_irqrestore(&db->lock,flags); - - dm9000_msleep(db, 1); /* Wait read complete */ - - spin_lock_irqsave(&db->lock,flags); - reg_save = readb(db->io_addr); - - iow(db, DM9000_EPCR, 0x0); /* Clear phyxcer read command */ - - /* The read data keeps on REG_0D & REG_0E */ - ret = (ior(db, DM9000_EPDRH) << 8) | ior(db, DM9000_EPDRL); - - /* restore the previous address */ - writeb(reg_save, db->io_addr); - spin_unlock_irqrestore(&db->lock,flags); - - mutex_unlock(&db->addr_lock); - - dm9000_dbg(db, 5, "phy_read[%02x] -> %04x\n", reg, ret); - return ret; -} - -/* - * Write a word to phyxcer - */ -static void -dm9000_phy_write(struct net_device *dev, - int phyaddr_unused, int reg, int value) -{ - board_info_t *db = netdev_priv(dev); - unsigned long flags; - unsigned long reg_save; - - dm9000_dbg(db, 5, "phy_write[%02x] = %04x\n", reg, value); - mutex_lock(&db->addr_lock); - - spin_lock_irqsave(&db->lock,flags); - - /* Save previous register address */ - reg_save = readb(db->io_addr); - - /* Fill the phyxcer register into REG_0C */ - iow(db, DM9000_EPAR, DM9000_PHY | reg); - - /* Fill the written data into REG_0D & REG_0E */ - iow(db, DM9000_EPDRL, value); - iow(db, DM9000_EPDRH, value >> 8); - - iow(db, DM9000_EPCR, EPCR_EPOS | EPCR_ERPRW); /* Issue phyxcer write command */ - - writeb(reg_save, db->io_addr); - spin_unlock_irqrestore(&db->lock, flags); - - dm9000_msleep(db, 1); /* Wait write complete */ - - spin_lock_irqsave(&db->lock,flags); - reg_save = readb(db->io_addr); - - iow(db, DM9000_EPCR, 0x0); /* Clear phyxcer write command */ - - /* restore the previous address */ - writeb(reg_save, db->io_addr); - - spin_unlock_irqrestore(&db->lock, flags); - mutex_unlock(&db->addr_lock); -} - static void dm9000_shutdown(struct net_device *dev) { @@ -1502,7 +1503,12 @@ dm9000_probe(struct platform_device *pdev) db->flags |= DM9000_PLATF_SIMPLE_PHY; #endif - dm9000_reset(db); + /* Fixing bug on dm9000_probe, takeover dm9000_reset(db), + * Need 'NCR_MAC_LBK' bit to indeed stable our DM9000 fifo + * while probe stage. + */ + + iow(db, DM9000_NCR, NCR_MAC_LBK | NCR_RST); /* try multiple times, DM9000 sometimes gets the read wrong */ for (i = 0; i < 8; i++) { diff --git a/drivers/net/ethernet/davicom/dm9000.h b/drivers/net/ethernet/davicom/dm9000.h index 55688bd1a3e..9ce058adaba 100644 --- a/drivers/net/ethernet/davicom/dm9000.h +++ b/drivers/net/ethernet/davicom/dm9000.h @@ -69,7 +69,9 @@ #define NCR_WAKEEN (1<<6) #define NCR_FCOL (1<<4) #define NCR_FDX (1<<3) -#define NCR_LBK (3<<1) + +#define NCR_RESERVED (3<<1) +#define NCR_MAC_LBK (1<<1) #define NCR_RST (1<<0) #define NSR_SPEED (1<<7) @@ -167,5 +169,12 @@ #define ISR_LNKCHNG (1<<5) #define ISR_UNDERRUN (1<<4) +/* Davicom MII registers. + */ + +#define MII_DM_DSPCR 0x1b /* DSP Control Register */ + +#define DSPCR_INIT_PARAM 0xE100 /* DSP init parameter */ + #endif /* _DM9000X_H_ */ -- cgit v1.2.3-70-g09d2 From 901ceba4e81e9dd6b4a3c4c37ee22000a6c5c65f Mon Sep 17 00:00:00 2001 From: Stone Piao Date: Fri, 29 Mar 2013 19:21:21 -0700 Subject: mwifiex: limit channel number not to overflow memory Limit the channel number in scan request, or the driver scan config structure memory will be overflowed. Cc: # 3.5+ Signed-off-by: Stone Piao Signed-off-by: Bing Zhao Signed-off-by: John W. Linville --- drivers/net/wireless/mwifiex/cfg80211.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'drivers/net') diff --git a/drivers/net/wireless/mwifiex/cfg80211.c b/drivers/net/wireless/mwifiex/cfg80211.c index a44023a7bd5..8aaf56ade4d 100644 --- a/drivers/net/wireless/mwifiex/cfg80211.c +++ b/drivers/net/wireless/mwifiex/cfg80211.c @@ -1892,7 +1892,8 @@ mwifiex_cfg80211_scan(struct wiphy *wiphy, } } - for (i = 0; i < request->n_channels; i++) { + for (i = 0; i < min_t(u32, request->n_channels, + MWIFIEX_USER_SCAN_CHAN_MAX); i++) { chan = request->channels[i]; priv->user_scan_cfg->chan_list[i].chan_number = chan->hw_value; priv->user_scan_cfg->chan_list[i].radio_type = chan->band; -- cgit v1.2.3-70-g09d2 From fcd99434fb5c137274d2e15dd2a6a7455f0f29ff Mon Sep 17 00:00:00 2001 From: Veaceslav Falico Date: Tue, 2 Apr 2013 05:15:16 +0000 Subject: bonding: get netdev_rx_handler_unregister out of locks Now that netdev_rx_handler_unregister contains synchronize_net(), we need to call it outside of bond->lock, cause it might sleep. Also, remove the already unneded synchronize_net(). Signed-off-by: Veaceslav Falico Acked-by: Eric Dumazet Signed-off-by: David S. Miller --- drivers/net/bonding/bond_main.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/bonding/bond_main.c b/drivers/net/bonding/bond_main.c index 6bbd90e1123..a51241b2e62 100644 --- a/drivers/net/bonding/bond_main.c +++ b/drivers/net/bonding/bond_main.c @@ -1976,12 +1976,11 @@ static int __bond_release_one(struct net_device *bond_dev, return -EINVAL; } + write_unlock_bh(&bond->lock); /* unregister rx_handler early so bond_handle_frame wouldn't be called * for this slave anymore. */ netdev_rx_handler_unregister(slave_dev); - write_unlock_bh(&bond->lock); - synchronize_net(); write_lock_bh(&bond->lock); if (!all && !bond->params.fail_over_mac) { -- cgit v1.2.3-70-g09d2 From bab6a9eac05360db25c81b0090f6b1195dd986cc Mon Sep 17 00:00:00 2001 From: Yan Burman Date: Tue, 2 Apr 2013 16:49:45 +0300 Subject: net/mlx4_en: Fix setting initial MAC address Commit 6bbb6d9 "net/mlx4_en: Optimize Rx fast path filter checks" introduced a regression under which the MAC address read from the card was not converted correctly (the most significant byte was not handled), fix that. Reviewed-by: Or Gerlitz Signed-off-by: Yan Burman Signed-off-by: David S. Miller --- drivers/net/ethernet/mellanox/mlx4/en_netdev.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/mellanox/mlx4/en_netdev.c b/drivers/net/ethernet/mellanox/mlx4/en_netdev.c index f278b10ef71..30d78f806dc 100644 --- a/drivers/net/ethernet/mellanox/mlx4/en_netdev.c +++ b/drivers/net/ethernet/mellanox/mlx4/en_netdev.c @@ -411,8 +411,8 @@ static int mlx4_en_vlan_rx_kill_vid(struct net_device *dev, unsigned short vid) static void mlx4_en_u64_to_mac(unsigned char dst_mac[ETH_ALEN + 2], u64 src_mac) { - unsigned int i; - for (i = ETH_ALEN - 1; i; --i) { + int i; + for (i = ETH_ALEN - 1; i >= 0; --i) { dst_mac[i] = src_mac & 0xff; src_mac >>= 8; } -- cgit v1.2.3-70-g09d2 From 21de979ecfc7b7f9442f8aea9a54b3ab670d0151 Mon Sep 17 00:00:00 2001 From: Bing Zhao Date: Mon, 1 Apr 2013 12:44:45 -0700 Subject: mwifiex: complete last internal scan We are waiting on first scan command of internal scan request before association, so we should complete on last internal scan command response. Cc: # 3.8 Tested-by: Daniel Drake Tested-by: Marco Cesarano Signed-off-by: Bing Zhao Signed-off-by: Amitkumar Karwar Signed-off-by: John W. Linville --- drivers/net/wireless/mwifiex/scan.c | 11 +++++++++-- 1 file changed, 9 insertions(+), 2 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/wireless/mwifiex/scan.c b/drivers/net/wireless/mwifiex/scan.c index d215b4d3c51..e7f6deaf715 100644 --- a/drivers/net/wireless/mwifiex/scan.c +++ b/drivers/net/wireless/mwifiex/scan.c @@ -1393,8 +1393,10 @@ int mwifiex_scan_networks(struct mwifiex_private *priv, queue_work(adapter->workqueue, &adapter->main_work); /* Perform internal scan synchronously */ - if (!priv->scan_request) + if (!priv->scan_request) { + dev_dbg(adapter->dev, "wait internal scan\n"); mwifiex_wait_queue_complete(adapter, cmd_node); + } } else { spin_unlock_irqrestore(&adapter->scan_pending_q_lock, flags); @@ -1793,7 +1795,12 @@ check_next_scan: /* Need to indicate IOCTL complete */ if (adapter->curr_cmd->wait_q_enabled) { adapter->cmd_wait_q.status = 0; - mwifiex_complete_cmd(adapter, adapter->curr_cmd); + if (!priv->scan_request) { + dev_dbg(adapter->dev, + "complete internal scan\n"); + mwifiex_complete_cmd(adapter, + adapter->curr_cmd); + } } if (priv->report_scan_result) priv->report_scan_result = false; -- cgit v1.2.3-70-g09d2 From 992f6068f09b3d711ffe247701287a2ee87842cb Mon Sep 17 00:00:00 2001 From: Hante Meuleman Date: Tue, 2 Apr 2013 21:06:17 +0200 Subject: brcmfmac: fix tkip mic tx/rx ap swap bug. tx and rx michael tkip keys are always swapped in case being configured per mac. This is wrong for AP. The swap should only be done for STA mode. Reviewed-by: Arend Van Spriel Reviewed-by: Pieter-Paul Giesberts Reviewed-by: Piotr Haber Signed-off-by: Hante Meuleman Signed-off-by: Arend van Spriel Signed-off-by: John W. Linville --- drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c | 9 ++++++--- 1 file changed, 6 insertions(+), 3 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c b/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c index 2af9c0f0798..3bc47eaf167 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c +++ b/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c @@ -1891,8 +1891,10 @@ static s32 brcmf_add_keyext(struct wiphy *wiphy, struct net_device *ndev, u8 key_idx, const u8 *mac_addr, struct key_params *params) { + struct brcmf_if *ifp = netdev_priv(ndev); struct brcmf_wsec_key key; s32 err = 0; + u8 keybuf[8]; memset(&key, 0, sizeof(key)); key.index = (u32) key_idx; @@ -1916,8 +1918,9 @@ brcmf_add_keyext(struct wiphy *wiphy, struct net_device *ndev, brcmf_dbg(CONN, "Setting the key index %d\n", key.index); memcpy(key.data, params->key, key.len); - if (params->cipher == WLAN_CIPHER_SUITE_TKIP) { - u8 keybuf[8]; + if ((ifp->vif->mode != WL_MODE_AP) && + (params->cipher == WLAN_CIPHER_SUITE_TKIP)) { + brcmf_dbg(CONN, "Swapping RX/TX MIC key\n"); memcpy(keybuf, &key.data[24], sizeof(keybuf)); memcpy(&key.data[24], &key.data[16], sizeof(keybuf)); memcpy(&key.data[16], keybuf, sizeof(keybuf)); @@ -2013,7 +2016,7 @@ brcmf_cfg80211_add_key(struct wiphy *wiphy, struct net_device *ndev, break; case WLAN_CIPHER_SUITE_TKIP: if (ifp->vif->mode != WL_MODE_AP) { - brcmf_dbg(CONN, "Swapping key\n"); + brcmf_dbg(CONN, "Swapping RX/TX MIC key\n"); memcpy(keybuf, &key.data[24], sizeof(keybuf)); memcpy(&key.data[24], &key.data[16], sizeof(keybuf)); memcpy(&key.data[16], keybuf, sizeof(keybuf)); -- cgit v1.2.3-70-g09d2 From 5c33a9420499e384a5b7c2262b17fd608ec76472 Mon Sep 17 00:00:00 2001 From: Hante Meuleman Date: Tue, 2 Apr 2013 21:06:18 +0200 Subject: brcmfmac: fix stopping AP. on stop_ap the dongle was not properly shutdown. As a result it was not possible to restart AP or STA after AP operation without restarting the device. This patch will fix that. Reviewed-by: Arend Van Spriel Reviewed-by: Pieter-Paul Giesberts Reviewed-by: Piotr Haber Signed-off-by: Hante Meuleman Signed-off-by: Arend van Spriel Signed-off-by: John W. Linville --- .../net/wireless/brcm80211/brcmfmac/wl_cfg80211.c | 25 +++++++++++++--------- 1 file changed, 15 insertions(+), 10 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c b/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c index 3bc47eaf167..b9dbf2c0f63 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c +++ b/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c @@ -3827,8 +3827,9 @@ exit: static int brcmf_cfg80211_stop_ap(struct wiphy *wiphy, struct net_device *ndev) { struct brcmf_if *ifp = netdev_priv(ndev); - s32 err = -EPERM; + s32 err; struct brcmf_fil_bss_enable_le bss_enable; + struct brcmf_join_params join_params; brcmf_dbg(TRACE, "Enter\n"); @@ -3836,16 +3837,21 @@ static int brcmf_cfg80211_stop_ap(struct wiphy *wiphy, struct net_device *ndev) /* Due to most likely deauths outstanding we sleep */ /* first to make sure they get processed by fw. */ msleep(400); - err = brcmf_fil_cmd_int_set(ifp, BRCMF_C_SET_AP, 0); - if (err < 0) { - brcmf_err("setting AP mode failed %d\n", err); - goto exit; - } + + memset(&join_params, 0, sizeof(join_params)); + err = brcmf_fil_cmd_data_set(ifp, BRCMF_C_SET_SSID, + &join_params, sizeof(join_params)); + if (err < 0) + brcmf_err("SET SSID error (%d)\n", err); err = brcmf_fil_cmd_int_set(ifp, BRCMF_C_UP, 0); - if (err < 0) { + if (err < 0) brcmf_err("BRCMF_C_UP error %d\n", err); - goto exit; - } + err = brcmf_fil_cmd_int_set(ifp, BRCMF_C_SET_AP, 0); + if (err < 0) + brcmf_err("setting AP mode failed %d\n", err); + err = brcmf_fil_cmd_int_set(ifp, BRCMF_C_SET_INFRA, 0); + if (err < 0) + brcmf_err("setting INFRA mode failed %d\n", err); } else { bss_enable.bsscfg_idx = cpu_to_le32(ifp->bssidx); bss_enable.enable = cpu_to_le32(0); @@ -3858,7 +3864,6 @@ static int brcmf_cfg80211_stop_ap(struct wiphy *wiphy, struct net_device *ndev) set_bit(BRCMF_VIF_STATUS_AP_CREATING, &ifp->vif->sme_state); clear_bit(BRCMF_VIF_STATUS_AP_CREATED, &ifp->vif->sme_state); -exit: return err; } -- cgit v1.2.3-70-g09d2 From c5bf53a826d22c284e6e1d309d32c388684e26a7 Mon Sep 17 00:00:00 2001 From: Hante Meuleman Date: Tue, 2 Apr 2013 21:06:19 +0200 Subject: brcmfmac: fix returning cipher_suite for get_key operation. When multiple cipher suites have been programmed then the lowest suite is to be retured. This fixes issue when AP mode is using CCMP and TKIP WPA combination where rekeying will fail. Reviewed-by: Arend Van Spriel Reviewed-by: Pieter-Paul Giesberts Reviewed-by: Piotr Haber Signed-off-by: Hante Meuleman Signed-off-by: Arend van Spriel Signed-off-by: John W. Linville --- drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c | 12 ++++-------- 1 file changed, 4 insertions(+), 8 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c b/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c index b9dbf2c0f63..ec46ffff540 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c +++ b/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c @@ -2121,8 +2121,7 @@ brcmf_cfg80211_get_key(struct wiphy *wiphy, struct net_device *ndev, err = -EAGAIN; goto done; } - switch (wsec & ~SES_OW_ENABLED) { - case WEP_ENABLED: + if (wsec & WEP_ENABLED) { sec = &profile->sec; if (sec->cipher_pairwise & WLAN_CIPHER_SUITE_WEP40) { params.cipher = WLAN_CIPHER_SUITE_WEP40; @@ -2131,16 +2130,13 @@ brcmf_cfg80211_get_key(struct wiphy *wiphy, struct net_device *ndev, params.cipher = WLAN_CIPHER_SUITE_WEP104; brcmf_dbg(CONN, "WLAN_CIPHER_SUITE_WEP104\n"); } - break; - case TKIP_ENABLED: + } else if (wsec & TKIP_ENABLED) { params.cipher = WLAN_CIPHER_SUITE_TKIP; brcmf_dbg(CONN, "WLAN_CIPHER_SUITE_TKIP\n"); - break; - case AES_ENABLED: + } else if (wsec & AES_ENABLED) { params.cipher = WLAN_CIPHER_SUITE_AES_CMAC; brcmf_dbg(CONN, "WLAN_CIPHER_SUITE_AES_CMAC\n"); - break; - default: + } else { brcmf_err("Invalid algo (0x%x)\n", wsec); err = -EINVAL; goto done; -- cgit v1.2.3-70-g09d2 From 3eaa956c5b18b9c955ae5a4e6e6909cae23f38e0 Mon Sep 17 00:00:00 2001 From: Franky Lin Date: Tue, 2 Apr 2013 21:06:20 +0200 Subject: brcmfmac: do not proceed if fail to download nvram to dongle Nvram contains critical initialization parameter for firmware to run. Host driver should not proceed if nvram fails to be downloaded to dongle. Reviewed-by: Piotr Haber Reviewed-by: Arend van Spriel Reviewed-by: Pieter-Paul Giesberts Signed-off-by: Franky Lin Signed-off-by: Arend van Spriel Signed-off-by: John W. Linville --- drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c b/drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c index 4469321c0eb..35fc68be158 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c +++ b/drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c @@ -3317,15 +3317,15 @@ static int _brcmf_sdbrcm_download_firmware(struct brcmf_sdio *bus) goto err; } - /* External image takes precedence if specified */ if (brcmf_sdbrcm_download_code_file(bus)) { brcmf_err("dongle image file download failed\n"); goto err; } - /* External nvram takes precedence if specified */ - if (brcmf_sdbrcm_download_nvram(bus)) + if (brcmf_sdbrcm_download_nvram(bus)) { brcmf_err("dongle nvram file download failed\n"); + goto err; + } /* Take arm out of reset */ if (brcmf_sdbrcm_download_state(bus, false)) { -- cgit v1.2.3-70-g09d2 From f50b1cd37446ad32c432f0f73bbed67a1c076eae Mon Sep 17 00:00:00 2001 From: Robert Shade Date: Tue, 2 Apr 2013 19:52:45 -0400 Subject: ath9k: Re-enable interrupts after a channel change failure ath_complete_reset will not be called if ath9k_hw_reset is unsuccessful, so we need to re-enable intertupts to balence the previous ath_prepare_reset call. Also schedule a reset as a best effort method to recover the chip from whatever state caused the channel change failure. Fixes https://bugzilla.kernel.org/show_bug.cgi?id=55771 Signed-off-by: Robert Shade Signed-off-by: John W. Linville --- drivers/net/wireless/ath/ath9k/main.c | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'drivers/net') diff --git a/drivers/net/wireless/ath/ath9k/main.c b/drivers/net/wireless/ath/ath9k/main.c index 6e66f9c6782..988372d218a 100644 --- a/drivers/net/wireless/ath/ath9k/main.c +++ b/drivers/net/wireless/ath/ath9k/main.c @@ -280,6 +280,10 @@ static int ath_reset_internal(struct ath_softc *sc, struct ath9k_channel *hchan) if (r) { ath_err(common, "Unable to reset channel, reset status %d\n", r); + + ath9k_hw_enable_interrupts(ah); + ath9k_queue_reset(sc, RESET_TYPE_BB_HANG); + goto out; } -- cgit v1.2.3-70-g09d2 From 83589b30f1e1dc9898986293c9336b8ce1705dec Mon Sep 17 00:00:00 2001 From: Tim Gardner Date: Mon, 18 Feb 2013 12:56:28 -0700 Subject: rt2x00: rt2x00pci_regbusy_read() - only print register access failure once BugLink: http://bugs.launchpad.net/bugs/1128840 It appears that when this register read fails it never recovers, so I think there is no need to repeat the same error message ad infinitum. Cc: Ivo van Doorn Cc: Gertjan van Wingerde Cc: Helmut Schaa Cc: "John W. Linville" Cc: linux-wireless@vger.kernel.org Cc: users@rt2x00.serialmonkey.com Cc: netdev@vger.kernel.org Cc: stable@vger.kernel.org Signed-off-by: Tim Gardner Signed-off-by: John W. Linville --- drivers/net/wireless/rt2x00/rt2x00pci.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/wireless/rt2x00/rt2x00pci.c b/drivers/net/wireless/rt2x00/rt2x00pci.c index a0c8caef3b0..b1c673ecada 100644 --- a/drivers/net/wireless/rt2x00/rt2x00pci.c +++ b/drivers/net/wireless/rt2x00/rt2x00pci.c @@ -52,8 +52,8 @@ int rt2x00pci_regbusy_read(struct rt2x00_dev *rt2x00dev, udelay(REGISTER_BUSY_DELAY); } - ERROR(rt2x00dev, "Indirect register access failed: " - "offset=0x%.08x, value=0x%.08x\n", offset, *reg); + printk_once(KERN_ERR "%s() Indirect register access failed: " + "offset=0x%.08x, value=0x%.08x\n", __func__, offset, *reg); *reg = ~0; return 0; -- cgit v1.2.3-70-g09d2 From 69a2bac8984c4e6dba78b330ed183fd580c65e99 Mon Sep 17 00:00:00 2001 From: Gabor Juhos Date: Fri, 29 Mar 2013 15:52:27 +0100 Subject: rt2x00: rt2x00pci: fix build error on Ralink RT3x5x SoCs The rt2800pci driver supports the built-in wireless MAC of the Ralink RT3x5x SoCs. However building the driver for these SoCs leads to the following error: LD init/built-in.o drivers/built-in.o: In function `rt2800pci_rxdone_tasklet': <...>/drivers/net/wireless/rt2x00/rt2800pci.c:1012: undefined reference to `rt2x00pci_rxdone' drivers/built-in.o:(.rodata+0x4780): undefined reference to `rt2x00pci_initialize' drivers/built-in.o:(.rodata+0x4784): undefined reference to `rt2x00pci_uninitialize' drivers/built-in.o:(.rodata+0x47bc): undefined reference to `rt2x00pci_flush_queue' drivers/built-in.o:(.rodata+0x4818): undefined reference to `rt2x00pci_regbusy_read' make[5]: *** [vmlinux] Error 1 The missing functions are provided by the rt2x00pci module. This module is only selected by the rt2800pci driver if PCI support is enabled in the kernel, because some parts of the rt2x00pci code depends on PCI support. PCI support is not available on the RT3x5x SoCs because those have no PCI host controller at all. Move the non PCI specific code from rt2x00pci into a separate module. This makes it possible to use that code even if PCI support is disabled. The affected functions are used by all of the rt2x00 PCI drivers so select the new module for those drivers. Signed-off-by: Gabor Juhos Signed-off-by: John W. Linville --- drivers/net/wireless/rt2x00/Kconfig | 7 + drivers/net/wireless/rt2x00/Makefile | 1 + drivers/net/wireless/rt2x00/rt2400pci.c | 1 + drivers/net/wireless/rt2x00/rt2500pci.c | 1 + drivers/net/wireless/rt2x00/rt2800pci.c | 1 + drivers/net/wireless/rt2x00/rt2x00mmio.c | 216 +++++++++++++++++++++++++++++++ drivers/net/wireless/rt2x00/rt2x00mmio.h | 119 +++++++++++++++++ drivers/net/wireless/rt2x00/rt2x00pci.c | 176 ------------------------- drivers/net/wireless/rt2x00/rt2x00pci.h | 88 ------------- drivers/net/wireless/rt2x00/rt61pci.c | 1 + 10 files changed, 347 insertions(+), 264 deletions(-) create mode 100644 drivers/net/wireless/rt2x00/rt2x00mmio.c create mode 100644 drivers/net/wireless/rt2x00/rt2x00mmio.h (limited to 'drivers/net') diff --git a/drivers/net/wireless/rt2x00/Kconfig b/drivers/net/wireless/rt2x00/Kconfig index 2bf4efa3318..76cd47eb901 100644 --- a/drivers/net/wireless/rt2x00/Kconfig +++ b/drivers/net/wireless/rt2x00/Kconfig @@ -20,6 +20,7 @@ if RT2X00 config RT2400PCI tristate "Ralink rt2400 (PCI/PCMCIA) support" depends on PCI + select RT2X00_LIB_MMIO select RT2X00_LIB_PCI select EEPROM_93CX6 ---help--- @@ -31,6 +32,7 @@ config RT2400PCI config RT2500PCI tristate "Ralink rt2500 (PCI/PCMCIA) support" depends on PCI + select RT2X00_LIB_MMIO select RT2X00_LIB_PCI select EEPROM_93CX6 ---help--- @@ -43,6 +45,7 @@ config RT61PCI tristate "Ralink rt2501/rt61 (PCI/PCMCIA) support" depends on PCI select RT2X00_LIB_PCI + select RT2X00_LIB_MMIO select RT2X00_LIB_FIRMWARE select RT2X00_LIB_CRYPTO select CRC_ITU_T @@ -57,6 +60,7 @@ config RT2800PCI tristate "Ralink rt27xx/rt28xx/rt30xx (PCI/PCIe/PCMCIA) support" depends on PCI || SOC_RT288X || SOC_RT305X select RT2800_LIB + select RT2X00_LIB_MMIO select RT2X00_LIB_PCI if PCI select RT2X00_LIB_SOC if SOC_RT288X || SOC_RT305X select RT2X00_LIB_FIRMWARE @@ -185,6 +189,9 @@ endif config RT2800_LIB tristate +config RT2X00_LIB_MMIO + tristate + config RT2X00_LIB_PCI tristate select RT2X00_LIB diff --git a/drivers/net/wireless/rt2x00/Makefile b/drivers/net/wireless/rt2x00/Makefile index 349d5b8284a..f069d8bc5b6 100644 --- a/drivers/net/wireless/rt2x00/Makefile +++ b/drivers/net/wireless/rt2x00/Makefile @@ -9,6 +9,7 @@ rt2x00lib-$(CONFIG_RT2X00_LIB_FIRMWARE) += rt2x00firmware.o rt2x00lib-$(CONFIG_RT2X00_LIB_LEDS) += rt2x00leds.o obj-$(CONFIG_RT2X00_LIB) += rt2x00lib.o +obj-$(CONFIG_RT2X00_LIB_MMIO) += rt2x00mmio.o obj-$(CONFIG_RT2X00_LIB_PCI) += rt2x00pci.o obj-$(CONFIG_RT2X00_LIB_SOC) += rt2x00soc.o obj-$(CONFIG_RT2X00_LIB_USB) += rt2x00usb.o diff --git a/drivers/net/wireless/rt2x00/rt2400pci.c b/drivers/net/wireless/rt2x00/rt2400pci.c index 221beaaa83f..dcfb54e0c51 100644 --- a/drivers/net/wireless/rt2x00/rt2400pci.c +++ b/drivers/net/wireless/rt2x00/rt2400pci.c @@ -34,6 +34,7 @@ #include #include "rt2x00.h" +#include "rt2x00mmio.h" #include "rt2x00pci.h" #include "rt2400pci.h" diff --git a/drivers/net/wireless/rt2x00/rt2500pci.c b/drivers/net/wireless/rt2x00/rt2500pci.c index 39edc59e8d0..e1d2dc9ed28 100644 --- a/drivers/net/wireless/rt2x00/rt2500pci.c +++ b/drivers/net/wireless/rt2x00/rt2500pci.c @@ -34,6 +34,7 @@ #include #include "rt2x00.h" +#include "rt2x00mmio.h" #include "rt2x00pci.h" #include "rt2500pci.h" diff --git a/drivers/net/wireless/rt2x00/rt2800pci.c b/drivers/net/wireless/rt2x00/rt2800pci.c index ded73da4de0..ba5a05625aa 100644 --- a/drivers/net/wireless/rt2x00/rt2800pci.c +++ b/drivers/net/wireless/rt2x00/rt2800pci.c @@ -41,6 +41,7 @@ #include #include "rt2x00.h" +#include "rt2x00mmio.h" #include "rt2x00pci.h" #include "rt2x00soc.h" #include "rt2800lib.h" diff --git a/drivers/net/wireless/rt2x00/rt2x00mmio.c b/drivers/net/wireless/rt2x00/rt2x00mmio.c new file mode 100644 index 00000000000..d84a680ba0c --- /dev/null +++ b/drivers/net/wireless/rt2x00/rt2x00mmio.c @@ -0,0 +1,216 @@ +/* + Copyright (C) 2004 - 2009 Ivo van Doorn + + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the + Free Software Foundation, Inc., + 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + */ + +/* + Module: rt2x00mmio + Abstract: rt2x00 generic mmio device routines. + */ + +#include +#include +#include +#include + +#include "rt2x00.h" +#include "rt2x00mmio.h" + +/* + * Register access. + */ +int rt2x00pci_regbusy_read(struct rt2x00_dev *rt2x00dev, + const unsigned int offset, + const struct rt2x00_field32 field, + u32 *reg) +{ + unsigned int i; + + if (!test_bit(DEVICE_STATE_PRESENT, &rt2x00dev->flags)) + return 0; + + for (i = 0; i < REGISTER_BUSY_COUNT; i++) { + rt2x00pci_register_read(rt2x00dev, offset, reg); + if (!rt2x00_get_field32(*reg, field)) + return 1; + udelay(REGISTER_BUSY_DELAY); + } + + printk_once(KERN_ERR "%s() Indirect register access failed: " + "offset=0x%.08x, value=0x%.08x\n", __func__, offset, *reg); + *reg = ~0; + + return 0; +} +EXPORT_SYMBOL_GPL(rt2x00pci_regbusy_read); + +bool rt2x00pci_rxdone(struct rt2x00_dev *rt2x00dev) +{ + struct data_queue *queue = rt2x00dev->rx; + struct queue_entry *entry; + struct queue_entry_priv_pci *entry_priv; + struct skb_frame_desc *skbdesc; + int max_rx = 16; + + while (--max_rx) { + entry = rt2x00queue_get_entry(queue, Q_INDEX); + entry_priv = entry->priv_data; + + if (rt2x00dev->ops->lib->get_entry_state(entry)) + break; + + /* + * Fill in desc fields of the skb descriptor + */ + skbdesc = get_skb_frame_desc(entry->skb); + skbdesc->desc = entry_priv->desc; + skbdesc->desc_len = entry->queue->desc_size; + + /* + * DMA is already done, notify rt2x00lib that + * it finished successfully. + */ + rt2x00lib_dmastart(entry); + rt2x00lib_dmadone(entry); + + /* + * Send the frame to rt2x00lib for further processing. + */ + rt2x00lib_rxdone(entry, GFP_ATOMIC); + } + + return !max_rx; +} +EXPORT_SYMBOL_GPL(rt2x00pci_rxdone); + +void rt2x00pci_flush_queue(struct data_queue *queue, bool drop) +{ + unsigned int i; + + for (i = 0; !rt2x00queue_empty(queue) && i < 10; i++) + msleep(10); +} +EXPORT_SYMBOL_GPL(rt2x00pci_flush_queue); + +/* + * Device initialization handlers. + */ +static int rt2x00pci_alloc_queue_dma(struct rt2x00_dev *rt2x00dev, + struct data_queue *queue) +{ + struct queue_entry_priv_pci *entry_priv; + void *addr; + dma_addr_t dma; + unsigned int i; + + /* + * Allocate DMA memory for descriptor and buffer. + */ + addr = dma_alloc_coherent(rt2x00dev->dev, + queue->limit * queue->desc_size, + &dma, GFP_KERNEL); + if (!addr) + return -ENOMEM; + + memset(addr, 0, queue->limit * queue->desc_size); + + /* + * Initialize all queue entries to contain valid addresses. + */ + for (i = 0; i < queue->limit; i++) { + entry_priv = queue->entries[i].priv_data; + entry_priv->desc = addr + i * queue->desc_size; + entry_priv->desc_dma = dma + i * queue->desc_size; + } + + return 0; +} + +static void rt2x00pci_free_queue_dma(struct rt2x00_dev *rt2x00dev, + struct data_queue *queue) +{ + struct queue_entry_priv_pci *entry_priv = + queue->entries[0].priv_data; + + if (entry_priv->desc) + dma_free_coherent(rt2x00dev->dev, + queue->limit * queue->desc_size, + entry_priv->desc, entry_priv->desc_dma); + entry_priv->desc = NULL; +} + +int rt2x00pci_initialize(struct rt2x00_dev *rt2x00dev) +{ + struct data_queue *queue; + int status; + + /* + * Allocate DMA + */ + queue_for_each(rt2x00dev, queue) { + status = rt2x00pci_alloc_queue_dma(rt2x00dev, queue); + if (status) + goto exit; + } + + /* + * Register interrupt handler. + */ + status = request_irq(rt2x00dev->irq, + rt2x00dev->ops->lib->irq_handler, + IRQF_SHARED, rt2x00dev->name, rt2x00dev); + if (status) { + ERROR(rt2x00dev, "IRQ %d allocation failed (error %d).\n", + rt2x00dev->irq, status); + goto exit; + } + + return 0; + +exit: + queue_for_each(rt2x00dev, queue) + rt2x00pci_free_queue_dma(rt2x00dev, queue); + + return status; +} +EXPORT_SYMBOL_GPL(rt2x00pci_initialize); + +void rt2x00pci_uninitialize(struct rt2x00_dev *rt2x00dev) +{ + struct data_queue *queue; + + /* + * Free irq line. + */ + free_irq(rt2x00dev->irq, rt2x00dev); + + /* + * Free DMA + */ + queue_for_each(rt2x00dev, queue) + rt2x00pci_free_queue_dma(rt2x00dev, queue); +} +EXPORT_SYMBOL_GPL(rt2x00pci_uninitialize); + +/* + * rt2x00mmio module information. + */ +MODULE_AUTHOR(DRV_PROJECT); +MODULE_VERSION(DRV_VERSION); +MODULE_DESCRIPTION("rt2x00 mmio library"); +MODULE_LICENSE("GPL"); diff --git a/drivers/net/wireless/rt2x00/rt2x00mmio.h b/drivers/net/wireless/rt2x00/rt2x00mmio.h new file mode 100644 index 00000000000..4ecaf60175b --- /dev/null +++ b/drivers/net/wireless/rt2x00/rt2x00mmio.h @@ -0,0 +1,119 @@ +/* + Copyright (C) 2004 - 2009 Ivo van Doorn + + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the + Free Software Foundation, Inc., + 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + */ + +/* + Module: rt2x00mmio + Abstract: Data structures for the rt2x00mmio module. + */ + +#ifndef RT2X00MMIO_H +#define RT2X00MMIO_H + +#include + +/* + * Register access. + */ +static inline void rt2x00pci_register_read(struct rt2x00_dev *rt2x00dev, + const unsigned int offset, + u32 *value) +{ + *value = readl(rt2x00dev->csr.base + offset); +} + +static inline void rt2x00pci_register_multiread(struct rt2x00_dev *rt2x00dev, + const unsigned int offset, + void *value, const u32 length) +{ + memcpy_fromio(value, rt2x00dev->csr.base + offset, length); +} + +static inline void rt2x00pci_register_write(struct rt2x00_dev *rt2x00dev, + const unsigned int offset, + u32 value) +{ + writel(value, rt2x00dev->csr.base + offset); +} + +static inline void rt2x00pci_register_multiwrite(struct rt2x00_dev *rt2x00dev, + const unsigned int offset, + const void *value, + const u32 length) +{ + __iowrite32_copy(rt2x00dev->csr.base + offset, value, length >> 2); +} + +/** + * rt2x00pci_regbusy_read - Read from register with busy check + * @rt2x00dev: Device pointer, see &struct rt2x00_dev. + * @offset: Register offset + * @field: Field to check if register is busy + * @reg: Pointer to where register contents should be stored + * + * This function will read the given register, and checks if the + * register is busy. If it is, it will sleep for a couple of + * microseconds before reading the register again. If the register + * is not read after a certain timeout, this function will return + * FALSE. + */ +int rt2x00pci_regbusy_read(struct rt2x00_dev *rt2x00dev, + const unsigned int offset, + const struct rt2x00_field32 field, + u32 *reg); + +/** + * struct queue_entry_priv_pci: Per entry PCI specific information + * + * @desc: Pointer to device descriptor + * @desc_dma: DMA pointer to &desc. + * @data: Pointer to device's entry memory. + * @data_dma: DMA pointer to &data. + */ +struct queue_entry_priv_pci { + __le32 *desc; + dma_addr_t desc_dma; +}; + +/** + * rt2x00pci_rxdone - Handle RX done events + * @rt2x00dev: Device pointer, see &struct rt2x00_dev. + * + * Returns true if there are still rx frames pending and false if all + * pending rx frames were processed. + */ +bool rt2x00pci_rxdone(struct rt2x00_dev *rt2x00dev); + +/** + * rt2x00pci_flush_queue - Flush data queue + * @queue: Data queue to stop + * @drop: True to drop all pending frames. + * + * This will wait for a maximum of 100ms, waiting for the queues + * to become empty. + */ +void rt2x00pci_flush_queue(struct data_queue *queue, bool drop); + +/* + * Device initialization handlers. + */ +int rt2x00pci_initialize(struct rt2x00_dev *rt2x00dev); +void rt2x00pci_uninitialize(struct rt2x00_dev *rt2x00dev); + +#endif /* RT2X00MMIO_H */ diff --git a/drivers/net/wireless/rt2x00/rt2x00pci.c b/drivers/net/wireless/rt2x00/rt2x00pci.c index b1c673ecada..e87865e3311 100644 --- a/drivers/net/wireless/rt2x00/rt2x00pci.c +++ b/drivers/net/wireless/rt2x00/rt2x00pci.c @@ -32,182 +32,6 @@ #include "rt2x00.h" #include "rt2x00pci.h" -/* - * Register access. - */ -int rt2x00pci_regbusy_read(struct rt2x00_dev *rt2x00dev, - const unsigned int offset, - const struct rt2x00_field32 field, - u32 *reg) -{ - unsigned int i; - - if (!test_bit(DEVICE_STATE_PRESENT, &rt2x00dev->flags)) - return 0; - - for (i = 0; i < REGISTER_BUSY_COUNT; i++) { - rt2x00pci_register_read(rt2x00dev, offset, reg); - if (!rt2x00_get_field32(*reg, field)) - return 1; - udelay(REGISTER_BUSY_DELAY); - } - - printk_once(KERN_ERR "%s() Indirect register access failed: " - "offset=0x%.08x, value=0x%.08x\n", __func__, offset, *reg); - *reg = ~0; - - return 0; -} -EXPORT_SYMBOL_GPL(rt2x00pci_regbusy_read); - -bool rt2x00pci_rxdone(struct rt2x00_dev *rt2x00dev) -{ - struct data_queue *queue = rt2x00dev->rx; - struct queue_entry *entry; - struct queue_entry_priv_pci *entry_priv; - struct skb_frame_desc *skbdesc; - int max_rx = 16; - - while (--max_rx) { - entry = rt2x00queue_get_entry(queue, Q_INDEX); - entry_priv = entry->priv_data; - - if (rt2x00dev->ops->lib->get_entry_state(entry)) - break; - - /* - * Fill in desc fields of the skb descriptor - */ - skbdesc = get_skb_frame_desc(entry->skb); - skbdesc->desc = entry_priv->desc; - skbdesc->desc_len = entry->queue->desc_size; - - /* - * DMA is already done, notify rt2x00lib that - * it finished successfully. - */ - rt2x00lib_dmastart(entry); - rt2x00lib_dmadone(entry); - - /* - * Send the frame to rt2x00lib for further processing. - */ - rt2x00lib_rxdone(entry, GFP_ATOMIC); - } - - return !max_rx; -} -EXPORT_SYMBOL_GPL(rt2x00pci_rxdone); - -void rt2x00pci_flush_queue(struct data_queue *queue, bool drop) -{ - unsigned int i; - - for (i = 0; !rt2x00queue_empty(queue) && i < 10; i++) - msleep(10); -} -EXPORT_SYMBOL_GPL(rt2x00pci_flush_queue); - -/* - * Device initialization handlers. - */ -static int rt2x00pci_alloc_queue_dma(struct rt2x00_dev *rt2x00dev, - struct data_queue *queue) -{ - struct queue_entry_priv_pci *entry_priv; - void *addr; - dma_addr_t dma; - unsigned int i; - - /* - * Allocate DMA memory for descriptor and buffer. - */ - addr = dma_alloc_coherent(rt2x00dev->dev, - queue->limit * queue->desc_size, - &dma, GFP_KERNEL); - if (!addr) - return -ENOMEM; - - memset(addr, 0, queue->limit * queue->desc_size); - - /* - * Initialize all queue entries to contain valid addresses. - */ - for (i = 0; i < queue->limit; i++) { - entry_priv = queue->entries[i].priv_data; - entry_priv->desc = addr + i * queue->desc_size; - entry_priv->desc_dma = dma + i * queue->desc_size; - } - - return 0; -} - -static void rt2x00pci_free_queue_dma(struct rt2x00_dev *rt2x00dev, - struct data_queue *queue) -{ - struct queue_entry_priv_pci *entry_priv = - queue->entries[0].priv_data; - - if (entry_priv->desc) - dma_free_coherent(rt2x00dev->dev, - queue->limit * queue->desc_size, - entry_priv->desc, entry_priv->desc_dma); - entry_priv->desc = NULL; -} - -int rt2x00pci_initialize(struct rt2x00_dev *rt2x00dev) -{ - struct data_queue *queue; - int status; - - /* - * Allocate DMA - */ - queue_for_each(rt2x00dev, queue) { - status = rt2x00pci_alloc_queue_dma(rt2x00dev, queue); - if (status) - goto exit; - } - - /* - * Register interrupt handler. - */ - status = request_irq(rt2x00dev->irq, - rt2x00dev->ops->lib->irq_handler, - IRQF_SHARED, rt2x00dev->name, rt2x00dev); - if (status) { - ERROR(rt2x00dev, "IRQ %d allocation failed (error %d).\n", - rt2x00dev->irq, status); - goto exit; - } - - return 0; - -exit: - queue_for_each(rt2x00dev, queue) - rt2x00pci_free_queue_dma(rt2x00dev, queue); - - return status; -} -EXPORT_SYMBOL_GPL(rt2x00pci_initialize); - -void rt2x00pci_uninitialize(struct rt2x00_dev *rt2x00dev) -{ - struct data_queue *queue; - - /* - * Free irq line. - */ - free_irq(rt2x00dev->irq, rt2x00dev); - - /* - * Free DMA - */ - queue_for_each(rt2x00dev, queue) - rt2x00pci_free_queue_dma(rt2x00dev, queue); -} -EXPORT_SYMBOL_GPL(rt2x00pci_uninitialize); - /* * PCI driver handlers. */ diff --git a/drivers/net/wireless/rt2x00/rt2x00pci.h b/drivers/net/wireless/rt2x00/rt2x00pci.h index e2c99f2b9a1..60d90b20f8b 100644 --- a/drivers/net/wireless/rt2x00/rt2x00pci.h +++ b/drivers/net/wireless/rt2x00/rt2x00pci.h @@ -35,94 +35,6 @@ */ #define PCI_DEVICE_DATA(__ops) .driver_data = (kernel_ulong_t)(__ops) -/* - * Register access. - */ -static inline void rt2x00pci_register_read(struct rt2x00_dev *rt2x00dev, - const unsigned int offset, - u32 *value) -{ - *value = readl(rt2x00dev->csr.base + offset); -} - -static inline void rt2x00pci_register_multiread(struct rt2x00_dev *rt2x00dev, - const unsigned int offset, - void *value, const u32 length) -{ - memcpy_fromio(value, rt2x00dev->csr.base + offset, length); -} - -static inline void rt2x00pci_register_write(struct rt2x00_dev *rt2x00dev, - const unsigned int offset, - u32 value) -{ - writel(value, rt2x00dev->csr.base + offset); -} - -static inline void rt2x00pci_register_multiwrite(struct rt2x00_dev *rt2x00dev, - const unsigned int offset, - const void *value, - const u32 length) -{ - __iowrite32_copy(rt2x00dev->csr.base + offset, value, length >> 2); -} - -/** - * rt2x00pci_regbusy_read - Read from register with busy check - * @rt2x00dev: Device pointer, see &struct rt2x00_dev. - * @offset: Register offset - * @field: Field to check if register is busy - * @reg: Pointer to where register contents should be stored - * - * This function will read the given register, and checks if the - * register is busy. If it is, it will sleep for a couple of - * microseconds before reading the register again. If the register - * is not read after a certain timeout, this function will return - * FALSE. - */ -int rt2x00pci_regbusy_read(struct rt2x00_dev *rt2x00dev, - const unsigned int offset, - const struct rt2x00_field32 field, - u32 *reg); - -/** - * struct queue_entry_priv_pci: Per entry PCI specific information - * - * @desc: Pointer to device descriptor - * @desc_dma: DMA pointer to &desc. - * @data: Pointer to device's entry memory. - * @data_dma: DMA pointer to &data. - */ -struct queue_entry_priv_pci { - __le32 *desc; - dma_addr_t desc_dma; -}; - -/** - * rt2x00pci_rxdone - Handle RX done events - * @rt2x00dev: Device pointer, see &struct rt2x00_dev. - * - * Returns true if there are still rx frames pending and false if all - * pending rx frames were processed. - */ -bool rt2x00pci_rxdone(struct rt2x00_dev *rt2x00dev); - -/** - * rt2x00pci_flush_queue - Flush data queue - * @queue: Data queue to stop - * @drop: True to drop all pending frames. - * - * This will wait for a maximum of 100ms, waiting for the queues - * to become empty. - */ -void rt2x00pci_flush_queue(struct data_queue *queue, bool drop); - -/* - * Device initialization handlers. - */ -int rt2x00pci_initialize(struct rt2x00_dev *rt2x00dev); -void rt2x00pci_uninitialize(struct rt2x00_dev *rt2x00dev); - /* * PCI driver handlers. */ diff --git a/drivers/net/wireless/rt2x00/rt61pci.c b/drivers/net/wireless/rt2x00/rt61pci.c index f95792cfcf8..9e3c8ff53e3 100644 --- a/drivers/net/wireless/rt2x00/rt61pci.c +++ b/drivers/net/wireless/rt2x00/rt61pci.c @@ -35,6 +35,7 @@ #include #include "rt2x00.h" +#include "rt2x00mmio.h" #include "rt2x00pci.h" #include "rt61pci.h" -- cgit v1.2.3-70-g09d2 From e2409d83434d77874b461b78af6a19cd6e6a1280 Mon Sep 17 00:00:00 2001 From: hayeswang Date: Sun, 31 Mar 2013 17:02:04 +0000 Subject: r8169: fix auto speed down issue It would cause no link after suspending or shutdowning when the nic changes the speed to 10M and connects to a link partner which forces the speed to 100M. Check the link partner ability to determine which speed to set. Signed-off-by: Hayes Wang Acked-by: Francois Romieu Signed-off-by: David S. Miller --- drivers/net/ethernet/realtek/r8169.c | 28 +++++++++++++++++++++++++--- 1 file changed, 25 insertions(+), 3 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/realtek/r8169.c b/drivers/net/ethernet/realtek/r8169.c index 28fb50a1e9c..4ecbe64a758 100644 --- a/drivers/net/ethernet/realtek/r8169.c +++ b/drivers/net/ethernet/realtek/r8169.c @@ -3818,6 +3818,30 @@ static void rtl_init_mdio_ops(struct rtl8169_private *tp) } } +static void rtl_speed_down(struct rtl8169_private *tp) +{ + u32 adv; + int lpa; + + rtl_writephy(tp, 0x1f, 0x0000); + lpa = rtl_readphy(tp, MII_LPA); + + if (lpa & (LPA_10HALF | LPA_10FULL)) + adv = ADVERTISED_10baseT_Half | ADVERTISED_10baseT_Full; + else if (lpa & (LPA_100HALF | LPA_100FULL)) + adv = ADVERTISED_10baseT_Half | ADVERTISED_10baseT_Full | + ADVERTISED_100baseT_Half | ADVERTISED_100baseT_Full; + else + adv = ADVERTISED_10baseT_Half | ADVERTISED_10baseT_Full | + ADVERTISED_100baseT_Half | ADVERTISED_100baseT_Full | + (tp->mii.supports_gmii ? + ADVERTISED_1000baseT_Half | + ADVERTISED_1000baseT_Full : 0); + + rtl8169_set_speed(tp->dev, AUTONEG_ENABLE, SPEED_1000, DUPLEX_FULL, + adv); +} + static void rtl_wol_suspend_quirk(struct rtl8169_private *tp) { void __iomem *ioaddr = tp->mmio_addr; @@ -3848,9 +3872,7 @@ static bool rtl_wol_pll_power_down(struct rtl8169_private *tp) if (!(__rtl8169_get_wol(tp) & WAKE_ANY)) return false; - rtl_writephy(tp, 0x1f, 0x0000); - rtl_writephy(tp, MII_BMCR, 0x0000); - + rtl_speed_down(tp); rtl_wol_suspend_quirk(tp); return true; -- cgit v1.2.3-70-g09d2 From 31d1670e73f4911fe401273a8f576edc9c2b5fea Mon Sep 17 00:00:00 2001 From: Hannes Frederic Sowa Date: Tue, 2 Apr 2013 14:36:46 +0000 Subject: atl1e: limit gso segment size to prevent generation of wrong ip length fields The limit of 0x3c00 is taken from the windows driver. Suggested-by: Huang, Xiong Cc: Huang, Xiong Cc: Eric Dumazet Signed-off-by: Hannes Frederic Sowa Signed-off-by: David S. Miller --- drivers/net/ethernet/atheros/atl1e/atl1e.h | 2 +- drivers/net/ethernet/atheros/atl1e/atl1e_main.c | 1 + 2 files changed, 2 insertions(+), 1 deletion(-) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/atheros/atl1e/atl1e.h b/drivers/net/ethernet/atheros/atl1e/atl1e.h index edfdf6b950e..b5fd934585e 100644 --- a/drivers/net/ethernet/atheros/atl1e/atl1e.h +++ b/drivers/net/ethernet/atheros/atl1e/atl1e.h @@ -186,7 +186,7 @@ struct atl1e_tpd_desc { /* how about 0x2000 */ #define MAX_TX_BUF_LEN 0x2000 #define MAX_TX_BUF_SHIFT 13 -/*#define MAX_TX_BUF_LEN 0x3000 */ +#define MAX_TSO_SEG_SIZE 0x3c00 /* rrs word 1 bit 0:31 */ #define RRS_RX_CSUM_MASK 0xFFFF diff --git a/drivers/net/ethernet/atheros/atl1e/atl1e_main.c b/drivers/net/ethernet/atheros/atl1e/atl1e_main.c index f73d5609439..ac25f05ff68 100644 --- a/drivers/net/ethernet/atheros/atl1e/atl1e_main.c +++ b/drivers/net/ethernet/atheros/atl1e/atl1e_main.c @@ -2329,6 +2329,7 @@ static int atl1e_probe(struct pci_dev *pdev, const struct pci_device_id *ent) INIT_WORK(&adapter->reset_task, atl1e_reset_task); INIT_WORK(&adapter->link_chg_task, atl1e_link_chg_task); + netif_set_gso_max_size(netdev, MAX_TSO_SEG_SIZE); err = register_netdev(netdev); if (err) { netdev_err(netdev, "register netdevice failed\n"); -- cgit v1.2.3-70-g09d2 From 4de79c737b200492195ebc54a887075327e1ec1d Mon Sep 17 00:00:00 2001 From: Veaceslav Falico Date: Wed, 3 Apr 2013 05:46:33 +0000 Subject: bonding: remove sysfs before removing devices We have a race condition if we try to rmmod bonding and simultaneously add a bond master through sysfs. In bonding_exit() we first remove the devices (through rtnl_link_unregister() ) and only after that we remove the sysfs. If we manage to add a device through sysfs after that the devices were removed - we'll end up with that device/sysfs structure and with the module unloaded. Fix this by first removing the sysfs and only after that calling rtnl_link_unregister(). Signed-off-by: Veaceslav Falico Signed-off-by: David S. Miller --- drivers/net/bonding/bond_main.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/net') diff --git a/drivers/net/bonding/bond_main.c b/drivers/net/bonding/bond_main.c index a51241b2e62..171b10f167a 100644 --- a/drivers/net/bonding/bond_main.c +++ b/drivers/net/bonding/bond_main.c @@ -4902,8 +4902,8 @@ static void __exit bonding_exit(void) bond_destroy_debugfs(); - rtnl_link_unregister(&bond_link_ops); unregister_pernet_subsys(&bond_net_ops); + rtnl_link_unregister(&bond_link_ops); #ifdef CONFIG_NET_POLL_CONTROLLER /* -- cgit v1.2.3-70-g09d2 From f01fc1a82c2ee68726b400fadb156bd623b5f2f1 Mon Sep 17 00:00:00 2001 From: Jakub Kicinski Date: Wed, 3 Apr 2013 16:50:54 +0000 Subject: ixgbe: fix registration order of driver and DCA nofitication ixgbe_notify_dca cannot be called before driver registration because it expects driver's klist_devices to be allocated and initialized. While on it make sure debugfs files are removed when registration fails. Cc: stable Signed-off-by: Jakub Kicinski Tested-by: Phil Schmitt Signed-off-by: Jeff Kirsher Signed-off-by: David S. Miller --- drivers/net/ethernet/intel/ixgbe/ixgbe_main.c | 11 +++++++++-- 1 file changed, 9 insertions(+), 2 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c index db5611ae407..79f4a26ea6c 100644 --- a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c @@ -7922,12 +7922,19 @@ static int __init ixgbe_init_module(void) ixgbe_dbg_init(); #endif /* CONFIG_DEBUG_FS */ + ret = pci_register_driver(&ixgbe_driver); + if (ret) { +#ifdef CONFIG_DEBUG_FS + ixgbe_dbg_exit(); +#endif /* CONFIG_DEBUG_FS */ + return ret; + } + #ifdef CONFIG_IXGBE_DCA dca_register_notify(&dca_notifier); #endif - ret = pci_register_driver(&ixgbe_driver); - return ret; + return 0; } module_init(ixgbe_init_module); -- cgit v1.2.3-70-g09d2 From cb28ea3b13b86fb23448525f34720e659bda7aa8 Mon Sep 17 00:00:00 2001 From: Yaniv Rosner Date: Sun, 7 Apr 2013 05:36:23 +0000 Subject: bnx2x: Fix KR2 rapid link flap Check KR2 recovery time at the beginning of the work-around function. Signed-off-by: Yaniv Rosner Signed-off-by: Eilon Greenstein Signed-off-by: David S. Miller --- drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c | 18 +++++++++++------- 1 file changed, 11 insertions(+), 7 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c index 77ebae0ac64..0283f343b0d 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c @@ -13437,13 +13437,7 @@ static void bnx2x_check_kr2_wa(struct link_params *params, { struct bnx2x *bp = params->bp; u16 base_page, next_page, not_kr2_device, lane; - int sigdet = bnx2x_warpcore_get_sigdet(phy, params); - - if (!sigdet) { - if (!(vars->link_attr_sync & LINK_ATTR_SYNC_KR2_ENABLE)) - bnx2x_kr2_recovery(params, vars, phy); - return; - } + int sigdet; /* Once KR2 was disabled, wait 5 seconds before checking KR2 recovery * since some switches tend to reinit the AN process and clear the @@ -13454,6 +13448,16 @@ static void bnx2x_check_kr2_wa(struct link_params *params, vars->check_kr2_recovery_cnt--; return; } + + sigdet = bnx2x_warpcore_get_sigdet(phy, params); + if (!sigdet) { + if (!(vars->link_attr_sync & LINK_ATTR_SYNC_KR2_ENABLE)) { + bnx2x_kr2_recovery(params, vars, phy); + DP(NETIF_MSG_LINK, "No sigdet\n"); + } + return; + } + lane = bnx2x_get_warpcore_lane(phy, params); CL22_WR_OVER_CL45(bp, phy, MDIO_REG_BANK_AER_BLOCK, MDIO_AER_BLOCK_AER_REG, lane); -- cgit v1.2.3-70-g09d2 From fd5c07a8d6a10c7112b19f3b0d428627c62b06ab Mon Sep 17 00:00:00 2001 From: Haiyang Zhang Date: Fri, 5 Apr 2013 11:44:39 +0000 Subject: hyperv: Fix a kernel warning from netvsc_linkstatus_callback() The warning about local_bh_enable inside IRQ happens when disconnecting a virtual NIC. The reason for the warning is -- netif_tx_disable() is called when the NIC is disconnected. And it's called within irq context. netif_tx_disable() calls local_bh_enable() which displays warning if in irq. The fix is to remove the unnecessary netif_tx_disable & wake_queue() in the netvsc_linkstatus_callback(). Reported-by: Richard Genoud Tested-by: Long Li Tested-by: Richard Genoud Signed-off-by: Haiyang Zhang Reviewed-by: K. Y. Srinivasan Signed-off-by: David S. Miller --- drivers/net/hyperv/netvsc_drv.c | 2 -- 1 file changed, 2 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/hyperv/netvsc_drv.c b/drivers/net/hyperv/netvsc_drv.c index 5f85205cd12..8341b62e552 100644 --- a/drivers/net/hyperv/netvsc_drv.c +++ b/drivers/net/hyperv/netvsc_drv.c @@ -241,13 +241,11 @@ void netvsc_linkstatus_callback(struct hv_device *device_obj, if (status == 1) { netif_carrier_on(net); - netif_wake_queue(net); ndev_ctx = netdev_priv(net); schedule_delayed_work(&ndev_ctx->dwork, 0); schedule_delayed_work(&ndev_ctx->dwork, msecs_to_jiffies(20)); } else { netif_carrier_off(net); - netif_tx_disable(net); } } -- cgit v1.2.3-70-g09d2 From f1ea3cd70110d482ef1ce6ef158df113aa366f43 Mon Sep 17 00:00:00 2001 From: Haiyang Zhang Date: Fri, 5 Apr 2013 11:44:40 +0000 Subject: hyperv: Fix RNDIS send_completion code path In some cases, the VM_PKT_COMP message can arrive later than RNDIS completion message, which will free the packet memory. This may cause panic due to access to freed memory in netvsc_send_completion(). This patch fixes this problem by removing rndis_filter_send_request_completion() from the code path. The function was a no-op. Reported-by: Long Li Tested-by: Long Li Signed-off-by: Haiyang Zhang Reviewed-by: K. Y. Srinivasan Signed-off-by: David S. Miller --- drivers/net/hyperv/netvsc.c | 17 ++++++++++++----- drivers/net/hyperv/rndis_filter.c | 14 +------------- 2 files changed, 13 insertions(+), 18 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/hyperv/netvsc.c b/drivers/net/hyperv/netvsc.c index 1cd77483da5..f5f0f09e4cc 100644 --- a/drivers/net/hyperv/netvsc.c +++ b/drivers/net/hyperv/netvsc.c @@ -470,8 +470,10 @@ static void netvsc_send_completion(struct hv_device *device, packet->trans_id; /* Notify the layer above us */ - nvsc_packet->completion.send.send_completion( - nvsc_packet->completion.send.send_completion_ctx); + if (nvsc_packet) + nvsc_packet->completion.send.send_completion( + nvsc_packet->completion.send. + send_completion_ctx); num_outstanding_sends = atomic_dec_return(&net_device->num_outstanding_sends); @@ -498,6 +500,7 @@ int netvsc_send(struct hv_device *device, int ret = 0; struct nvsp_message sendMessage; struct net_device *ndev; + u64 req_id; net_device = get_outbound_net_device(device); if (!net_device) @@ -518,20 +521,24 @@ int netvsc_send(struct hv_device *device, 0xFFFFFFFF; sendMessage.msg.v1_msg.send_rndis_pkt.send_buf_section_size = 0; + if (packet->completion.send.send_completion) + req_id = (u64)packet; + else + req_id = 0; + if (packet->page_buf_cnt) { ret = vmbus_sendpacket_pagebuffer(device->channel, packet->page_buf, packet->page_buf_cnt, &sendMessage, sizeof(struct nvsp_message), - (unsigned long)packet); + req_id); } else { ret = vmbus_sendpacket(device->channel, &sendMessage, sizeof(struct nvsp_message), - (unsigned long)packet, + req_id, VM_PKT_DATA_INBAND, VMBUS_DATA_PACKET_FLAG_COMPLETION_REQUESTED); - } if (ret == 0) { diff --git a/drivers/net/hyperv/rndis_filter.c b/drivers/net/hyperv/rndis_filter.c index 2b657d4d63a..0775f0aefd1 100644 --- a/drivers/net/hyperv/rndis_filter.c +++ b/drivers/net/hyperv/rndis_filter.c @@ -61,9 +61,6 @@ struct rndis_request { static void rndis_filter_send_completion(void *ctx); -static void rndis_filter_send_request_completion(void *ctx); - - static struct rndis_device *get_rndis_device(void) { @@ -241,10 +238,7 @@ static int rndis_filter_send_request(struct rndis_device *dev, packet->page_buf[0].len; } - packet->completion.send.send_completion_ctx = req;/* packet; */ - packet->completion.send.send_completion = - rndis_filter_send_request_completion; - packet->completion.send.send_completion_tid = (unsigned long)dev; + packet->completion.send.send_completion = NULL; ret = netvsc_send(dev->net_dev->dev, packet); return ret; @@ -999,9 +993,3 @@ static void rndis_filter_send_completion(void *ctx) /* Pass it back to the original handler */ filter_pkt->completion(filter_pkt->completion_ctx); } - - -static void rndis_filter_send_request_completion(void *ctx) -{ - /* Noop */ -} -- cgit v1.2.3-70-g09d2 From b50b72de2f2feed4adfbd8e18610a393b5a04cc7 Mon Sep 17 00:00:00 2001 From: willy tarreau Date: Sat, 6 Apr 2013 08:47:01 +0000 Subject: net: mvneta: enable features before registering the driver It seems that the reason why the dev features were ignored was because they were enabled after registeration. Signed-off-by: Willy Tarreau Acked-by: Thomas Petazzoni Signed-off-by: David S. Miller --- drivers/net/ethernet/marvell/mvneta.c | 9 +++++---- 1 file changed, 5 insertions(+), 4 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/marvell/mvneta.c b/drivers/net/ethernet/marvell/mvneta.c index cd345b8969b..1e628ce5720 100644 --- a/drivers/net/ethernet/marvell/mvneta.c +++ b/drivers/net/ethernet/marvell/mvneta.c @@ -2771,16 +2771,17 @@ static int mvneta_probe(struct platform_device *pdev) netif_napi_add(dev, &pp->napi, mvneta_poll, pp->weight); + dev->features = NETIF_F_SG | NETIF_F_IP_CSUM; + dev->hw_features |= NETIF_F_SG | NETIF_F_IP_CSUM; + dev->vlan_features |= NETIF_F_SG | NETIF_F_IP_CSUM; + dev->priv_flags |= IFF_UNICAST_FLT; + err = register_netdev(dev); if (err < 0) { dev_err(&pdev->dev, "failed to register\n"); goto err_deinit; } - dev->features = NETIF_F_SG | NETIF_F_IP_CSUM; - dev->hw_features = NETIF_F_SG | NETIF_F_IP_CSUM; - dev->priv_flags |= IFF_UNICAST_FLT; - netdev_info(dev, "mac: %pM\n", dev->dev_addr); platform_set_drvdata(pdev, pp->dev); -- cgit v1.2.3-70-g09d2 From ffcdedb667b6db8ee31c7efa76a3ec59d9c3b0fc Mon Sep 17 00:00:00 2001 From: "nikolay@redhat.com" Date: Sat, 6 Apr 2013 00:54:37 +0000 Subject: Revert "bonding: remove sysfs before removing devices" This reverts commit 4de79c737b200492195ebc54a887075327e1ec1d. This patch introduces a new bug which causes access to freed memory. In bond_uninit: list_del(&bond->bond_list); bond_list is linked in bond_net's dev_list which is freed by unregister_pernet_subsys. Signed-off-by: Nikolay Aleksandrov Signed-off-by: David S. Miller --- drivers/net/bonding/bond_main.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/net') diff --git a/drivers/net/bonding/bond_main.c b/drivers/net/bonding/bond_main.c index 171b10f167a..a51241b2e62 100644 --- a/drivers/net/bonding/bond_main.c +++ b/drivers/net/bonding/bond_main.c @@ -4902,8 +4902,8 @@ static void __exit bonding_exit(void) bond_destroy_debugfs(); - unregister_pernet_subsys(&bond_net_ops); rtnl_link_unregister(&bond_link_ops); + unregister_pernet_subsys(&bond_net_ops); #ifdef CONFIG_NET_POLL_CONTROLLER /* -- cgit v1.2.3-70-g09d2 From 69b0216ac255f523556fa3d4ff030d857eaaa37f Mon Sep 17 00:00:00 2001 From: "nikolay@redhat.com" Date: Sat, 6 Apr 2013 00:54:38 +0000 Subject: bonding: fix bonding_masters race condition in bond unloading While the bonding module is unloading, it is considered that after rtnl_link_unregister all bond devices are destroyed but since no synchronization mechanism exists, a new bond device can be created via bonding_masters before unregister_pernet_subsys which would lead to multiple problems (e.g. NULL pointer dereference, wrong RIP, list corruption). This patch fixes the issue by removing any bond devices left in the netns after bonding_masters is removed from sysfs. Signed-off-by: Nikolay Aleksandrov Acked-by: Veaceslav Falico Signed-off-by: David S. Miller --- drivers/net/bonding/bond_main.c | 9 +++++++++ 1 file changed, 9 insertions(+) (limited to 'drivers/net') diff --git a/drivers/net/bonding/bond_main.c b/drivers/net/bonding/bond_main.c index a51241b2e62..07401a3e256 100644 --- a/drivers/net/bonding/bond_main.c +++ b/drivers/net/bonding/bond_main.c @@ -4846,9 +4846,18 @@ static int __net_init bond_net_init(struct net *net) static void __net_exit bond_net_exit(struct net *net) { struct bond_net *bn = net_generic(net, bond_net_id); + struct bonding *bond, *tmp_bond; + LIST_HEAD(list); bond_destroy_sysfs(bn); bond_destroy_proc_dir(bn); + + /* Kill off any bonds created after unregistering bond rtnl ops */ + rtnl_lock(); + list_for_each_entry_safe(bond, tmp_bond, &bn->dev_list, bond_list) + unregister_netdevice_queue(bond->dev, &list); + unregister_netdevice_many(&list); + rtnl_unlock(); } static struct pernet_operations bond_net_ops = { -- cgit v1.2.3-70-g09d2 From 61a0f6efc8932e9914e1782ff3a027e23c687fc6 Mon Sep 17 00:00:00 2001 From: Neil Horman Date: Tue, 9 Apr 2013 23:19:00 +0000 Subject: e100: Add dma mapping error check e100 uses pci_map_single, but fails to check for a dma mapping error after its use, resulting in a stack trace: [ 46.656594] ------------[ cut here ]------------ [ 46.657004] WARNING: at lib/dma-debug.c:933 check_unmap+0x47b/0x950() [ 46.657004] Hardware name: To Be Filled By O.E.M. [ 46.657004] e100 0000:00:0e.0: DMA-API: device driver failed to check map error[device address=0x000000007a4540fa] [size=90 bytes] [mapped as single] [ 46.657004] Modules linked in: [ 46.657004] w83627hf hwmon_vid snd_via82xx ppdev snd_ac97_codec ac97_bus snd_seq snd_pcm snd_mpu401 snd_mpu401_uart ns558 snd_rawmidi gameport parport_pc e100 snd_seq_device parport snd_page_alloc snd_timer snd soundcore skge shpchp k8temp mii edac_core i2c_viapro edac_mce_amd nfsd auth_rpcgss nfs_acl lockd sunrpc binfmt_misc uinput ata_generic pata_acpi radeon i2c_algo_bit drm_kms_helper ttm firewire_ohci drm firewire_core pata_via sata_via i2c_core sata_promise crc_itu_t [ 46.657004] Pid: 792, comm: ip Not tainted 3.8.0-0.rc6.git0.1.fc19.x86_64 #1 [ 46.657004] Call Trace: [ 46.657004] [] warn_slowpath_common+0x70/0xa0 [ 46.657004] [] warn_slowpath_fmt+0x4c/0x50 [ 46.657004] [] check_unmap+0x47b/0x950 [ 46.657004] [] debug_dma_unmap_page+0x5f/0x70 [ 46.657004] [] ? e100_tx_clean+0x30/0x210 [e100] [ 46.657004] [] e100_tx_clean+0xe8/0x210 [e100] [ 46.657004] [] e100_poll+0x56f/0x6c0 [e100] [ 46.657004] [] ? net_rx_action+0xa1/0x370 [ 46.657004] [] net_rx_action+0x172/0x370 [ 46.657004] [] __do_softirq+0xef/0x3d0 [ 46.657004] [] call_softirq+0x1c/0x30 [ 46.657004] [] do_softirq+0x85/0xc0 [ 46.657004] [] irq_exit+0xd5/0xe0 [ 46.657004] [] do_IRQ+0x56/0xc0 [ 46.657004] [] common_interrupt+0x72/0x72 [ 46.657004] [] ? _raw_spin_unlock_irqrestore+0x3b/0x70 [ 46.657004] [] __slab_free+0x58/0x38b [ 46.657004] [] ? fsnotify_clear_marks_by_inode+0x34/0x120 [ 46.657004] [] ? kmem_cache_free+0x97/0x320 [ 46.657004] [] ? sock_destroy_inode+0x34/0x40 [ 46.657004] [] ? sock_destroy_inode+0x34/0x40 [ 46.657004] [] kmem_cache_free+0x312/0x320 [ 46.657004] [] sock_destroy_inode+0x34/0x40 [ 46.657004] [] destroy_inode+0x38/0x60 [ 46.657004] [] evict+0x10e/0x1a0 [ 46.657004] [] iput+0xf5/0x180 [ 46.657004] [] dput+0x248/0x310 [ 46.657004] [] __fput+0x171/0x240 [ 46.657004] [] ____fput+0xe/0x10 [ 46.657004] [] task_work_run+0xac/0xe0 [ 46.657004] [] do_exit+0x26d/0xc30 [ 46.657004] [] ? finish_task_switch+0x7c/0x120 [ 46.657004] [] ? retint_swapgs+0x13/0x1b [ 46.657004] [] do_group_exit+0x49/0xc0 [ 46.657004] [] sys_exit_group+0x14/0x20 [ 46.657004] [] system_call_fastpath+0x16/0x1b [ 46.657004] ---[ end trace 4468c44e2156e7d1 ]--- [ 46.657004] Mapped at: [ 46.657004] [] debug_dma_map_page+0x91/0x140 [ 46.657004] [] e100_xmit_prepare+0x12b/0x1c0 [e100] [ 46.657004] [] e100_exec_cb+0x84/0x140 [e100] [ 46.657004] [] e100_xmit_frame+0x3a/0x190 [e100] [ 46.657004] [] dev_hard_start_xmit+0x259/0x6c0 Easy fix, modify the cb paramter to e100_exec_cb to return an error, and do the dma_mapping_error check in the obvious place This was reported previously here: http://article.gmane.org/gmane.linux.network/257893 But nobody stepped up and fixed it. CC: Josh Boyer CC: e1000-devel@lists.sourceforge.net Signed-off-by: Neil Horman Reported-by: Michal Jaegermann Tested-by: Aaron Brown Signed-off-by: Jeff Kirsher Signed-off-by: David S. Miller --- drivers/net/ethernet/intel/e100.c | 36 +++++++++++++++++++++++++----------- 1 file changed, 25 insertions(+), 11 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/intel/e100.c b/drivers/net/ethernet/intel/e100.c index ec800b093e7..d2bea3f07c7 100644 --- a/drivers/net/ethernet/intel/e100.c +++ b/drivers/net/ethernet/intel/e100.c @@ -870,7 +870,7 @@ err_unlock: } static int e100_exec_cb(struct nic *nic, struct sk_buff *skb, - void (*cb_prepare)(struct nic *, struct cb *, struct sk_buff *)) + int (*cb_prepare)(struct nic *, struct cb *, struct sk_buff *)) { struct cb *cb; unsigned long flags; @@ -888,10 +888,13 @@ static int e100_exec_cb(struct nic *nic, struct sk_buff *skb, nic->cbs_avail--; cb->skb = skb; + err = cb_prepare(nic, cb, skb); + if (err) + goto err_unlock; + if (unlikely(!nic->cbs_avail)) err = -ENOSPC; - cb_prepare(nic, cb, skb); /* Order is important otherwise we'll be in a race with h/w: * set S-bit in current first, then clear S-bit in previous. */ @@ -1091,7 +1094,7 @@ static void e100_get_defaults(struct nic *nic) nic->mii.mdio_write = mdio_write; } -static void e100_configure(struct nic *nic, struct cb *cb, struct sk_buff *skb) +static int e100_configure(struct nic *nic, struct cb *cb, struct sk_buff *skb) { struct config *config = &cb->u.config; u8 *c = (u8 *)config; @@ -1181,6 +1184,7 @@ static void e100_configure(struct nic *nic, struct cb *cb, struct sk_buff *skb) netif_printk(nic, hw, KERN_DEBUG, nic->netdev, "[16-23]=%02X:%02X:%02X:%02X:%02X:%02X:%02X:%02X\n", c[16], c[17], c[18], c[19], c[20], c[21], c[22], c[23]); + return 0; } /************************************************************************* @@ -1331,7 +1335,7 @@ static const struct firmware *e100_request_firmware(struct nic *nic) return fw; } -static void e100_setup_ucode(struct nic *nic, struct cb *cb, +static int e100_setup_ucode(struct nic *nic, struct cb *cb, struct sk_buff *skb) { const struct firmware *fw = (void *)skb; @@ -1358,6 +1362,7 @@ static void e100_setup_ucode(struct nic *nic, struct cb *cb, cb->u.ucode[min_size] |= cpu_to_le32((BUNDLESMALL) ? 0xFFFF : 0xFF80); cb->command = cpu_to_le16(cb_ucode | cb_el); + return 0; } static inline int e100_load_ucode_wait(struct nic *nic) @@ -1400,18 +1405,20 @@ static inline int e100_load_ucode_wait(struct nic *nic) return err; } -static void e100_setup_iaaddr(struct nic *nic, struct cb *cb, +static int e100_setup_iaaddr(struct nic *nic, struct cb *cb, struct sk_buff *skb) { cb->command = cpu_to_le16(cb_iaaddr); memcpy(cb->u.iaaddr, nic->netdev->dev_addr, ETH_ALEN); + return 0; } -static void e100_dump(struct nic *nic, struct cb *cb, struct sk_buff *skb) +static int e100_dump(struct nic *nic, struct cb *cb, struct sk_buff *skb) { cb->command = cpu_to_le16(cb_dump); cb->u.dump_buffer_addr = cpu_to_le32(nic->dma_addr + offsetof(struct mem, dump_buf)); + return 0; } static int e100_phy_check_without_mii(struct nic *nic) @@ -1581,7 +1588,7 @@ static int e100_hw_init(struct nic *nic) return 0; } -static void e100_multi(struct nic *nic, struct cb *cb, struct sk_buff *skb) +static int e100_multi(struct nic *nic, struct cb *cb, struct sk_buff *skb) { struct net_device *netdev = nic->netdev; struct netdev_hw_addr *ha; @@ -1596,6 +1603,7 @@ static void e100_multi(struct nic *nic, struct cb *cb, struct sk_buff *skb) memcpy(&cb->u.multi.addr[i++ * ETH_ALEN], &ha->addr, ETH_ALEN); } + return 0; } static void e100_set_multicast_list(struct net_device *netdev) @@ -1756,11 +1764,18 @@ static void e100_watchdog(unsigned long data) round_jiffies(jiffies + E100_WATCHDOG_PERIOD)); } -static void e100_xmit_prepare(struct nic *nic, struct cb *cb, +static int e100_xmit_prepare(struct nic *nic, struct cb *cb, struct sk_buff *skb) { + dma_addr_t dma_addr; cb->command = nic->tx_command; + dma_addr = pci_map_single(nic->pdev, + skb->data, skb->len, PCI_DMA_TODEVICE); + /* If we can't map the skb, have the upper layer try later */ + if (pci_dma_mapping_error(nic->pdev, dma_addr)) + return -ENOMEM; + /* * Use the last 4 bytes of the SKB payload packet as the CRC, used for * testing, ie sending frames with bad CRC. @@ -1777,11 +1792,10 @@ static void e100_xmit_prepare(struct nic *nic, struct cb *cb, cb->u.tcb.tcb_byte_count = 0; cb->u.tcb.threshold = nic->tx_threshold; cb->u.tcb.tbd_count = 1; - cb->u.tcb.tbd.buf_addr = cpu_to_le32(pci_map_single(nic->pdev, - skb->data, skb->len, PCI_DMA_TODEVICE)); - /* check for mapping failure? */ + cb->u.tcb.tbd.buf_addr = cpu_to_le32(dma_addr); cb->u.tcb.tbd.size = cpu_to_le16(skb->len); skb_tx_timestamp(skb); + return 0; } static netdev_tx_t e100_xmit_frame(struct sk_buff *skb, -- cgit v1.2.3-70-g09d2 From fea75645342c7ad574214497a78e562db12dfd7b Mon Sep 17 00:00:00 2001 From: Yuval Mintz Date: Wed, 10 Apr 2013 13:34:39 +0300 Subject: bnx2x: Prevent null pointer dereference in AFEX mode The cnic module is responsible for initializing various bnx2x structs via callbacks provided by the bnx2x module. One such struct is the queue object for the FCoE queue. If a device is working in AFEX mode and its configuration allows FCoE yet the cnic module is not loaded, it's very likely a null pointer dereference will occur, as the bnx2x will erroneously access the FCoE's queue object. Prevent said access until cnic properly registers itself. Signed-off-by: Yuval Mintz Signed-off-by: Ariel Elior Signed-off-by: Eilon Greenstein Signed-off-by: David S. Miller --- drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c index e81a747ea8c..8e58da909f5 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c @@ -4947,7 +4947,7 @@ static void bnx2x_after_function_update(struct bnx2x *bp) q); } - if (!NO_FCOE(bp)) { + if (!NO_FCOE(bp) && CNIC_ENABLED(bp)) { fp = &bp->fp[FCOE_IDX(bp)]; queue_params.q_obj = &bnx2x_sp_obj(bp, fp).q_obj; @@ -13354,6 +13354,7 @@ static int bnx2x_unregister_cnic(struct net_device *dev) RCU_INIT_POINTER(bp->cnic_ops, NULL); mutex_unlock(&bp->cnic_mutex); synchronize_rcu(); + bp->cnic_enabled = false; kfree(bp->cnic_kwq); bp->cnic_kwq = NULL; -- cgit v1.2.3-70-g09d2