From 239712ebb2b4750431980d33993ea05c6ac7ff65 Mon Sep 17 00:00:00 2001 From: Wey-Yi Guy Date: Thu, 20 Jan 2011 08:08:04 -0800 Subject: iwlwifi: don't read sku information from EEPROM for 4965 For all the new devices, the sku information should read from EEPROM but for legacy devices such as 4965, appearly the EEPROM does not contain the necessary information. so skip the read from EEPROM and go back to use software configuration. Reported-by: Helmut Schaa Signed-off-by: Wey-Yi Guy Tested-by: Helmut Schaa Signed-off-by: John W. Linville --- drivers/net/wireless/iwlwifi/iwl-4965.c | 1 + drivers/net/wireless/iwlwifi/iwl-agn-eeprom.c | 11 +++++++---- 2 files changed, 8 insertions(+), 4 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/wireless/iwlwifi/iwl-4965.c b/drivers/net/wireless/iwlwifi/iwl-4965.c index 3f1e5f1bf84..91a9f525346 100644 --- a/drivers/net/wireless/iwlwifi/iwl-4965.c +++ b/drivers/net/wireless/iwlwifi/iwl-4965.c @@ -2624,6 +2624,7 @@ struct iwl_cfg iwl4965_agn_cfg = { .fw_name_pre = IWL4965_FW_PRE, .ucode_api_max = IWL4965_UCODE_API_MAX, .ucode_api_min = IWL4965_UCODE_API_MIN, + .sku = IWL_SKU_A|IWL_SKU_G|IWL_SKU_N, .valid_tx_ant = ANT_AB, .valid_rx_ant = ANT_ABC, .eeprom_ver = EEPROM_4965_EEPROM_VERSION, diff --git a/drivers/net/wireless/iwlwifi/iwl-agn-eeprom.c b/drivers/net/wireless/iwlwifi/iwl-agn-eeprom.c index 14ceb4df72f..27b5a3eec9d 100644 --- a/drivers/net/wireless/iwlwifi/iwl-agn-eeprom.c +++ b/drivers/net/wireless/iwlwifi/iwl-agn-eeprom.c @@ -152,11 +152,14 @@ int iwl_eeprom_check_sku(struct iwl_priv *priv) eeprom_sku = iwl_eeprom_query16(priv, EEPROM_SKU_CAP); - priv->cfg->sku = ((eeprom_sku & EEPROM_SKU_CAP_BAND_SELECTION) >> + if (!priv->cfg->sku) { + /* not using sku overwrite */ + priv->cfg->sku = + ((eeprom_sku & EEPROM_SKU_CAP_BAND_SELECTION) >> EEPROM_SKU_CAP_BAND_POS); - if (eeprom_sku & EEPROM_SKU_CAP_11N_ENABLE) - priv->cfg->sku |= IWL_SKU_N; - + if (eeprom_sku & EEPROM_SKU_CAP_11N_ENABLE) + priv->cfg->sku |= IWL_SKU_N; + } if (!priv->cfg->sku) { IWL_ERR(priv, "Invalid device sku\n"); return -EINVAL; -- cgit v1.2.3-70-g09d2 From 6f4810101a629b31b5427872a09ea092cfc5c4bd Mon Sep 17 00:00:00 2001 From: "Luis R. Rodriguez" Date: Thu, 20 Jan 2011 17:47:39 -0800 Subject: ath9k_hw: disabled PAPRD for AR9003 AR9003's PAPRD was enabled prematurely, and is causing some large discrepancies on throughput and network connectivity. For example downlink (RX) throughput against an AR9280 AP can vary widlely from 43-73 Mbit/s while disabling this gets AR9382 (2x2) up to around 93 Mbit/s in a 2.4 GHz HT20 setup. Cc: stable@kernel.org Cc: Paul Shaw Signed-off-by: Luis R. Rodriguez Signed-off-by: John W. Linville --- drivers/net/wireless/ath/ath9k/hw.c | 6 +++++- drivers/net/wireless/ath/ath9k/hw.h | 1 + 2 files changed, 6 insertions(+), 1 deletion(-) (limited to 'drivers/net') diff --git a/drivers/net/wireless/ath/ath9k/hw.c b/drivers/net/wireless/ath/ath9k/hw.c index 1afb8bb8575..9f01e50d5cd 100644 --- a/drivers/net/wireless/ath/ath9k/hw.c +++ b/drivers/net/wireless/ath/ath9k/hw.c @@ -369,6 +369,9 @@ static void ath9k_hw_init_config(struct ath_hw *ah) else ah->config.ht_enable = 0; + /* PAPRD needs some more work to be enabled */ + ah->config.paprd_disable = 1; + ah->config.rx_intr_mitigation = true; ah->config.pcieSerDesWrite = true; @@ -1933,7 +1936,8 @@ int ath9k_hw_fill_cap_info(struct ath_hw *ah) pCap->rx_status_len = sizeof(struct ar9003_rxs); pCap->tx_desc_len = sizeof(struct ar9003_txc); pCap->txs_len = sizeof(struct ar9003_txs); - if (ah->eep_ops->get_eeprom(ah, EEP_PAPRD)) + if (!ah->config.paprd_disable && + ah->eep_ops->get_eeprom(ah, EEP_PAPRD)) pCap->hw_caps |= ATH9K_HW_CAP_PAPRD; } else { pCap->tx_desc_len = sizeof(struct ath_desc); diff --git a/drivers/net/wireless/ath/ath9k/hw.h b/drivers/net/wireless/ath/ath9k/hw.h index 5a3dfec45e9..ea9fde67064 100644 --- a/drivers/net/wireless/ath/ath9k/hw.h +++ b/drivers/net/wireless/ath/ath9k/hw.h @@ -225,6 +225,7 @@ struct ath9k_ops_config { u32 pcie_waen; u8 analog_shiftreg; u8 ht_enable; + u8 paprd_disable; u32 ofdm_trig_low; u32 ofdm_trig_high; u32 cck_trig_high; -- cgit v1.2.3-70-g09d2 From 783cd01e140d9db5c2d2279a96b81e16f9d81fef Mon Sep 17 00:00:00 2001 From: Felix Fietkau Date: Fri, 21 Jan 2011 18:52:38 +0100 Subject: ath9k: add missing ps wakeup/restore calls There are several places where ath_reset() was called without proper calls to ath9k_ps_wakeup/ath9k_ps_restore. To fix this, add those calls directly to ath_reset and drop them from callers where it makes sense. Also add them to the config callback around ath_update_txpow to fix a crash that happens when the tx power changed before any vif is brought up. Signed-off-by: Felix Fietkau Cc: stable@kernel.org Signed-off-by: John W. Linville --- drivers/net/wireless/ath/ath9k/main.c | 8 +++++--- drivers/net/wireless/ath/ath9k/xmit.c | 2 -- 2 files changed, 5 insertions(+), 5 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/wireless/ath/ath9k/main.c b/drivers/net/wireless/ath/ath9k/main.c index f90a6ca94a7..c79c97be6cd 100644 --- a/drivers/net/wireless/ath/ath9k/main.c +++ b/drivers/net/wireless/ath/ath9k/main.c @@ -592,14 +592,12 @@ void ath9k_tasklet(unsigned long data) u32 status = sc->intrstatus; u32 rxmask; - ath9k_ps_wakeup(sc); - if (status & ATH9K_INT_FATAL) { ath_reset(sc, true); - ath9k_ps_restore(sc); return; } + ath9k_ps_wakeup(sc); spin_lock(&sc->sc_pcu_lock); if (!ath9k_hw_check_alive(ah)) @@ -969,6 +967,7 @@ int ath_reset(struct ath_softc *sc, bool retry_tx) /* Stop ANI */ del_timer_sync(&common->ani.timer); + ath9k_ps_wakeup(sc); spin_lock_bh(&sc->sc_pcu_lock); ieee80211_stop_queues(hw); @@ -1015,6 +1014,7 @@ int ath_reset(struct ath_softc *sc, bool retry_tx) /* Start ANI */ ath_start_ani(common); + ath9k_ps_restore(sc); return r; } @@ -1701,7 +1701,9 @@ static int ath9k_config(struct ieee80211_hw *hw, u32 changed) skip_chan_change: if (changed & IEEE80211_CONF_CHANGE_POWER) { sc->config.txpowlimit = 2 * conf->power_level; + ath9k_ps_wakeup(sc); ath_update_txpow(sc); + ath9k_ps_restore(sc); } spin_lock_bh(&sc->wiphy_lock); diff --git a/drivers/net/wireless/ath/ath9k/xmit.c b/drivers/net/wireless/ath/ath9k/xmit.c index 332d1feb5c1..33a37edbaf7 100644 --- a/drivers/net/wireless/ath/ath9k/xmit.c +++ b/drivers/net/wireless/ath/ath9k/xmit.c @@ -2113,9 +2113,7 @@ static void ath_tx_complete_poll_work(struct work_struct *work) if (needreset) { ath_dbg(ath9k_hw_common(sc->sc_ah), ATH_DBG_RESET, "tx hung, resetting the chip\n"); - ath9k_ps_wakeup(sc); ath_reset(sc, true); - ath9k_ps_restore(sc); } ieee80211_queue_delayed_work(sc->hw, &sc->tx_complete_work, -- cgit v1.2.3-70-g09d2 From bdc4bf652bc0271ba8f1f25bbd3dbac90bead44e Mon Sep 17 00:00:00 2001 From: Jesper Juhl Date: Fri, 21 Jan 2011 13:40:54 -0600 Subject: rtlwifi: Fix possible NULL dereference In drivers/net/wireless/rtlwifi/pci.c::_rtl_pci_rx_interrupt() we call dev_alloc_skb(), which may fail and return NULL, but we do not check the returned value against NULL before dereferencing the returned pointer. This may lead to a NULL pointer dereference which means we'll crash - not good. In a separate call to dev_alloc_skb(), the debug level is changed so that the failure message will always be logged. Signed-off-by: Jesper Juhl Signed-off-by: Larry Finger Signed-off-by: John W. Linville --- drivers/net/wireless/rtlwifi/pci.c | 11 +++++++++-- 1 file changed, 9 insertions(+), 2 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/wireless/rtlwifi/pci.c b/drivers/net/wireless/rtlwifi/pci.c index 0fa36aa6701..1758d446324 100644 --- a/drivers/net/wireless/rtlwifi/pci.c +++ b/drivers/net/wireless/rtlwifi/pci.c @@ -619,6 +619,13 @@ static void _rtl_pci_rx_interrupt(struct ieee80211_hw *hw) struct sk_buff *uskb = NULL; u8 *pdata; uskb = dev_alloc_skb(skb->len + 128); + if (!uskb) { + RT_TRACE(rtlpriv, + (COMP_INTR | COMP_RECV), + DBG_EMERG, + ("can't alloc rx skb\n")); + goto done; + } memcpy(IEEE80211_SKB_RXCB(uskb), &rx_status, sizeof(rx_status)); @@ -641,7 +648,7 @@ static void _rtl_pci_rx_interrupt(struct ieee80211_hw *hw) new_skb = dev_alloc_skb(rtlpci->rxbuffersize); if (unlikely(!new_skb)) { RT_TRACE(rtlpriv, (COMP_INTR | COMP_RECV), - DBG_DMESG, + DBG_EMERG, ("can't alloc skb for rx\n")); goto done; } @@ -1066,9 +1073,9 @@ static int _rtl_pci_init_rx_ring(struct ieee80211_hw *hw) struct sk_buff *skb = dev_alloc_skb(rtlpci->rxbuffersize); u32 bufferaddress; - entry = &rtlpci->rx_ring[rx_queue_idx].desc[i]; if (!skb) return 0; + entry = &rtlpci->rx_ring[rx_queue_idx].desc[i]; /*skb->dev = dev; */ -- cgit v1.2.3-70-g09d2 From 9c4cf6d94fb362c27a24df5223ed6e327eb7279a Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Tue, 25 Jan 2011 17:42:29 +0800 Subject: rt2x00: add device id for windy31 usb device This patch adds the device id for the windy31 USB device to the rt73usb driver. Thanks to Ralf Flaxa for reporting this and providing testing and a sample device. Reported-by: Ralf Flaxa Tested-by: Ralf Flaxa Cc: stable Signed-off-by: Greg Kroah-Hartman Acked-by: Ivo van Doorn Signed-off-by: John W. Linville --- drivers/net/wireless/rt2x00/rt73usb.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers/net') diff --git a/drivers/net/wireless/rt2x00/rt73usb.c b/drivers/net/wireless/rt2x00/rt73usb.c index 0b4e8590cbb..029be3c6c03 100644 --- a/drivers/net/wireless/rt2x00/rt73usb.c +++ b/drivers/net/wireless/rt2x00/rt73usb.c @@ -2446,6 +2446,7 @@ static struct usb_device_id rt73usb_device_table[] = { { USB_DEVICE(0x04bb, 0x093d), USB_DEVICE_DATA(&rt73usb_ops) }, { USB_DEVICE(0x148f, 0x2573), USB_DEVICE_DATA(&rt73usb_ops) }, { USB_DEVICE(0x148f, 0x2671), USB_DEVICE_DATA(&rt73usb_ops) }, + { USB_DEVICE(0x0812, 0x3101), USB_DEVICE_DATA(&rt73usb_ops) }, /* Qcom */ { USB_DEVICE(0x18e8, 0x6196), USB_DEVICE_DATA(&rt73usb_ops) }, { USB_DEVICE(0x18e8, 0x6229), USB_DEVICE_DATA(&rt73usb_ops) }, -- cgit v1.2.3-70-g09d2