From e270b302e4771cde91e713ae17da31c1afc9a135 Mon Sep 17 00:00:00 2001
From: Hante Meuleman <meuleman@broadcom.com>
Date: Wed, 10 Oct 2012 11:13:06 -0700
Subject: brcmfmac: handle all exceptions as an error.

in brcmf_usb_probe_cb only return code ENOLINK was seen as an
error. This is wrong, all error codes should be returned to usb
subsystem.

Reviewed-by: Arend Van Spriel <arend@broadcom.com>
Signed-off-by: Hante Meuleman <meuleman@broadcom.com>
Signed-off-by: Franky Lin <frankyl@broadcom.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/brcm80211/brcmfmac/usb.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/brcm80211/brcmfmac/usb.c b/drivers/net/wireless/brcm80211/brcmfmac/usb.c
index a2b4b1e7101..7a6dfdc67b6 100644
--- a/drivers/net/wireless/brcm80211/brcmfmac/usb.c
+++ b/drivers/net/wireless/brcm80211/brcmfmac/usb.c
@@ -1339,7 +1339,7 @@ static int brcmf_usb_probe_cb(struct brcmf_usbdev_info *devinfo,
 	}
 
 	ret = brcmf_bus_start(dev);
-	if (ret == -ENOLINK) {
+	if (ret) {
 		brcmf_dbg(ERROR, "dongle is not responding\n");
 		brcmf_detach(dev);
 		goto fail;
-- 
cgit v1.2.3-70-g09d2


From a180b83bb1f036c587bdb93ac6171b94ff49133c Mon Sep 17 00:00:00 2001
From: Franky Lin <frankyl@broadcom.com>
Date: Wed, 10 Oct 2012 11:13:09 -0700
Subject: brcmfmac: use control channel in roamed status reporting

Channel reported in scan results passed to cfg80211 is control
channel. But chanspec is reported while notifying cfg80211 about
roamed update. Cfg80211 complains because it could not find the
bss in the list. Report control channel while calling
cfg80211_roamed.

Signed-off-by: Franky Lin <frankyl@broadcom.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 .../net/wireless/brcm80211/brcmfmac/wl_cfg80211.c  | 26 +++++++++++++++++-----
 1 file changed, 20 insertions(+), 6 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c b/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c
index c1abaa6db59..48f08ae9062 100644
--- a/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c
+++ b/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c
@@ -4606,12 +4606,13 @@ brcmf_bss_roaming_done(struct brcmf_cfg80211_info *cfg,
 	struct brcmf_cfg80211_profile *profile = cfg->profile;
 	struct brcmf_cfg80211_connect_info *conn_info = cfg_to_conn(cfg);
 	struct wiphy *wiphy = cfg_to_wiphy(cfg);
-	struct brcmf_channel_info_le channel_le;
-	struct ieee80211_channel *notify_channel;
+	struct ieee80211_channel *notify_channel = NULL;
 	struct ieee80211_supported_band *band;
+	struct brcmf_bss_info_le *bi;
 	u32 freq;
 	s32 err = 0;
 	u32 target_channel;
+	u8 *buf;
 
 	WL_TRACE("Enter\n");
 
@@ -4619,11 +4620,22 @@ brcmf_bss_roaming_done(struct brcmf_cfg80211_info *cfg,
 	memcpy(profile->bssid, e->addr, ETH_ALEN);
 	brcmf_update_bss_info(cfg);
 
-	brcmf_exec_dcmd(ndev, BRCMF_C_GET_CHANNEL, &channel_le,
-			sizeof(channel_le));
+	buf = kzalloc(WL_BSS_INFO_MAX, GFP_KERNEL);
+	if (buf == NULL) {
+		err = -ENOMEM;
+		goto done;
+	}
+
+	/* data sent to dongle has to be little endian */
+	*(__le32 *)buf = cpu_to_le32(WL_BSS_INFO_MAX);
+	err = brcmf_exec_dcmd(ndev, BRCMF_C_GET_BSS_INFO, buf, WL_BSS_INFO_MAX);
+
+	if (err)
+		goto done;
 
-	target_channel = le32_to_cpu(channel_le.target_channel);
-	WL_CONN("Roamed to channel %d\n", target_channel);
+	bi = (struct brcmf_bss_info_le *)(buf + 4);
+	target_channel = bi->ctl_ch ? bi->ctl_ch :
+				      CHSPEC_CHANNEL(le16_to_cpu(bi->chanspec));
 
 	if (target_channel <= CH_MAX_2G_CHANNEL)
 		band = wiphy->bands[IEEE80211_BAND_2GHZ];
@@ -4633,6 +4645,8 @@ brcmf_bss_roaming_done(struct brcmf_cfg80211_info *cfg,
 	freq = ieee80211_channel_to_frequency(target_channel, band->band);
 	notify_channel = ieee80211_get_channel(wiphy, freq);
 
+done:
+	kfree(buf);
 	cfg80211_roamed(ndev, notify_channel, (u8 *)profile->bssid,
 			conn_info->req_ie, conn_info->req_ie_len,
 			conn_info->resp_ie, conn_info->resp_ie_len, GFP_KERNEL);
-- 
cgit v1.2.3-70-g09d2


From 5dd161ff7b46029c9da4f4ef8b214b8ba4316445 Mon Sep 17 00:00:00 2001
From: Franky Lin <frankyl@broadcom.com>
Date: Wed, 10 Oct 2012 11:13:10 -0700
Subject: brcmfmac: set dongle mode accordingly when interface up

The mode of WiFi dongle should be initialized in brcmf_cfg80211_up
which get called when network interface is brought up. Otherwise
brcmf_cfg80211_get_station would return error.

Signed-off-by: Franky Lin <frankyl@broadcom.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 .../net/wireless/brcm80211/brcmfmac/wl_cfg80211.c  | 38 ++--------------------
 1 file changed, 2 insertions(+), 36 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c b/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c
index 48f08ae9062..2c66bae77b3 100644
--- a/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c
+++ b/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c
@@ -5200,41 +5200,6 @@ brcmf_cfg80211_event(struct net_device *ndev,
 		schedule_work(&cfg->event_work);
 }
 
-static s32 brcmf_dongle_mode(struct net_device *ndev, s32 iftype)
-{
-	s32 infra = 0;
-	s32 err = 0;
-
-	switch (iftype) {
-	case NL80211_IFTYPE_MONITOR:
-	case NL80211_IFTYPE_WDS:
-		WL_ERR("type (%d) : currently we do not support this mode\n",
-		       iftype);
-		err = -EINVAL;
-		return err;
-	case NL80211_IFTYPE_ADHOC:
-		infra = 0;
-		break;
-	case NL80211_IFTYPE_STATION:
-		infra = 1;
-		break;
-	case NL80211_IFTYPE_AP:
-		infra = 1;
-		break;
-	default:
-		err = -EINVAL;
-		WL_ERR("invalid type (%d)\n", iftype);
-		return err;
-	}
-	err = brcmf_exec_dcmd_u32(ndev, BRCMF_C_SET_INFRA, &infra);
-	if (err) {
-		WL_ERR("WLC_SET_INFRA error (%d)\n", err);
-		return err;
-	}
-
-	return 0;
-}
-
 static s32 brcmf_dongle_eventmsg(struct net_device *ndev)
 {
 	/* Room for "event_msgs" + '\0' + bitvec */
@@ -5453,7 +5418,8 @@ static s32 brcmf_config_dongle(struct brcmf_cfg80211_info *cfg)
 				WL_BEACON_TIMEOUT);
 	if (err)
 		goto default_conf_out;
-	err = brcmf_dongle_mode(ndev, wdev->iftype);
+	err = brcmf_cfg80211_change_iface(wdev->wiphy, ndev, wdev->iftype,
+					  NULL, NULL);
 	if (err && err != -EINPROGRESS)
 		goto default_conf_out;
 	err = brcmf_dongle_probecap(cfg);
-- 
cgit v1.2.3-70-g09d2


From 3e4f319dacc60c1b4537b85329d393ad18bf7501 Mon Sep 17 00:00:00 2001
From: Dan Carpenter <dan.carpenter@oracle.com>
Date: Wed, 10 Oct 2012 11:13:12 -0700
Subject: brcmfmac: fix end of loop check (signedness bug)

The problem here is that we loop until "remained_buf_len" is less than
zero, but since it is unsigned, it never is.

"remained_buf_len" has to be large enough to hold the value from
"mgmt_ie_buf_len".  That variable is type u32, but it only holds small
values so I have changed to both variables to int.

Also I removed the bogus initialization from "mgmt_ie_buf_len" so that
GCC can detect if it is used unitialized.  I moved the declaration of
"remained_buf_len" closer to where it is used so it's easier to read.

Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
Reviewed-by: Hante Meuleman <meuleman@broadcom.com>
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Franky Lin <frankyl@broadcom.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c b/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c
index 2c66bae77b3..411dfe7c7ff 100644
--- a/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c
+++ b/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c
@@ -3972,7 +3972,7 @@ brcmf_set_management_ie(struct brcmf_cfg80211_info *cfg,
 	u8  *iovar_ie_buf;
 	u8  *curr_ie_buf;
 	u8  *mgmt_ie_buf = NULL;
-	u32 mgmt_ie_buf_len = 0;
+	int mgmt_ie_buf_len;
 	u32 *mgmt_ie_len = 0;
 	u32 del_add_ie_buf_len = 0;
 	u32 total_ie_buf_len = 0;
@@ -3982,7 +3982,7 @@ brcmf_set_management_ie(struct brcmf_cfg80211_info *cfg,
 	struct parsed_vndr_ie_info *vndrie_info;
 	s32 i;
 	u8 *ptr;
-	u32 remained_buf_len;
+	int remained_buf_len;
 
 	WL_TRACE("bssidx %d, pktflag : 0x%02X\n", bssidx, pktflag);
 	iovar_ie_buf = kzalloc(WL_EXTRA_BUF_MAX, GFP_KERNEL);
-- 
cgit v1.2.3-70-g09d2


From bf11315eeda510ea4fc1a2bf972d8155d31d89b4 Mon Sep 17 00:00:00 2001
From: Stanislav Yakovlev <stas.yakovlev@gmail.com>
Date: Mon, 15 Oct 2012 14:14:32 +0000
Subject: net/wireless: ipw2200: Fix panic occurring in
 ipw_handle_promiscuous_tx()

The driver does not count space of radiotap fields when allocating skb for
radiotap packet. This leads to kernel panic with the following call trace:

...
[67607.676067] [<c152f90f>] error_code+0x67/0x6c
[67607.676067] [<c142f831>] ? skb_put+0x91/0xa0
[67607.676067] [<f8cf5e5b>] ? ipw_handle_promiscuous_tx+0x16b/0x2d0 [ipw2200]
[67607.676067] [<f8cf5e5b>] ipw_handle_promiscuous_tx+0x16b/0x2d0 [ipw2200]
[67607.676067] [<f8cf899b>] ipw_net_hard_start_xmit+0x8b/0x90 [ipw2200]
[67607.676067] [<f8741c5a>] libipw_xmit+0x55a/0x980 [libipw]
[67607.676067] [<c143d3e8>] dev_hard_start_xmit+0x218/0x4d0
...

This bug was found by VittGam.
https://bugzilla.kernel.org/show_bug.cgi?id=43255

Cc: stable@kernel.org
Signed-off-by: Stanislav Yakovlev <stas.yakovlev@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/ipw2x00/ipw2200.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/ipw2x00/ipw2200.c b/drivers/net/wireless/ipw2x00/ipw2200.c
index 935120fc8c9..768bf612533 100644
--- a/drivers/net/wireless/ipw2x00/ipw2200.c
+++ b/drivers/net/wireless/ipw2x00/ipw2200.c
@@ -10472,7 +10472,7 @@ static void ipw_handle_promiscuous_tx(struct ipw_priv *priv,
 		} else
 			len = src->len;
 
-		dst = alloc_skb(len + sizeof(*rt_hdr), GFP_ATOMIC);
+		dst = alloc_skb(len + sizeof(*rt_hdr) + sizeof(u16)*2, GFP_ATOMIC);
 		if (!dst)
 			continue;
 
-- 
cgit v1.2.3-70-g09d2


From 8f7b8db6e0557c8437adf9371e020cd89a7e85dc Mon Sep 17 00:00:00 2001
From: Johannes Berg <johannes.berg@intel.com>
Date: Tue, 25 Sep 2012 16:40:12 +0200
Subject: iwlwifi: fix 6000 series channel switch command

The channel switch command for 6000 series devices
is larger than the maximum inline command size of
320 bytes. The command is therefore refused with a
warning. Fix this by allocating the command and
using the NOCOPY mechanism.

Cc: stable@kernel.org
Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
---
 drivers/net/wireless/iwlwifi/dvm/devices.c | 39 ++++++++++++++++++------------
 1 file changed, 24 insertions(+), 15 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/iwlwifi/dvm/devices.c b/drivers/net/wireless/iwlwifi/dvm/devices.c
index 349c205d5f6..da586206419 100644
--- a/drivers/net/wireless/iwlwifi/dvm/devices.c
+++ b/drivers/net/wireless/iwlwifi/dvm/devices.c
@@ -518,7 +518,7 @@ static int iwl6000_hw_channel_switch(struct iwl_priv *priv,
 	 * See iwlagn_mac_channel_switch.
 	 */
 	struct iwl_rxon_context *ctx = &priv->contexts[IWL_RXON_CTX_BSS];
-	struct iwl6000_channel_switch_cmd cmd;
+	struct iwl6000_channel_switch_cmd *cmd;
 	u32 switch_time_in_usec, ucode_switch_time;
 	u16 ch;
 	u32 tsf_low;
@@ -527,18 +527,25 @@ static int iwl6000_hw_channel_switch(struct iwl_priv *priv,
 	struct ieee80211_vif *vif = ctx->vif;
 	struct iwl_host_cmd hcmd = {
 		.id = REPLY_CHANNEL_SWITCH,
-		.len = { sizeof(cmd), },
+		.len = { sizeof(*cmd), },
 		.flags = CMD_SYNC,
-		.data = { &cmd, },
+		.dataflags[0] = IWL_HCMD_DFL_NOCOPY,
 	};
+	int err;
 
-	cmd.band = priv->band == IEEE80211_BAND_2GHZ;
+	cmd = kzalloc(sizeof(*cmd), GFP_KERNEL);
+	if (!cmd)
+		return -ENOMEM;
+
+	hcmd.data[0] = cmd;
+
+	cmd->band = priv->band == IEEE80211_BAND_2GHZ;
 	ch = ch_switch->channel->hw_value;
 	IWL_DEBUG_11H(priv, "channel switch from %u to %u\n",
 		      ctx->active.channel, ch);
-	cmd.channel = cpu_to_le16(ch);
-	cmd.rxon_flags = ctx->staging.flags;
-	cmd.rxon_filter_flags = ctx->staging.filter_flags;
+	cmd->channel = cpu_to_le16(ch);
+	cmd->rxon_flags = ctx->staging.flags;
+	cmd->rxon_filter_flags = ctx->staging.filter_flags;
 	switch_count = ch_switch->count;
 	tsf_low = ch_switch->timestamp & 0x0ffffffff;
 	/*
@@ -554,23 +561,25 @@ static int iwl6000_hw_channel_switch(struct iwl_priv *priv,
 			switch_count = 0;
 	}
 	if (switch_count <= 1)
-		cmd.switch_time = cpu_to_le32(priv->ucode_beacon_time);
+		cmd->switch_time = cpu_to_le32(priv->ucode_beacon_time);
 	else {
 		switch_time_in_usec =
 			vif->bss_conf.beacon_int * switch_count * TIME_UNIT;
 		ucode_switch_time = iwl_usecs_to_beacons(priv,
 							 switch_time_in_usec,
 							 beacon_interval);
-		cmd.switch_time = iwl_add_beacon_time(priv,
-						      priv->ucode_beacon_time,
-						      ucode_switch_time,
-						      beacon_interval);
+		cmd->switch_time = iwl_add_beacon_time(priv,
+						       priv->ucode_beacon_time,
+						       ucode_switch_time,
+						       beacon_interval);
 	}
 	IWL_DEBUG_11H(priv, "uCode time for the switch is 0x%x\n",
-		      cmd.switch_time);
-	cmd.expect_beacon = ch_switch->channel->flags & IEEE80211_CHAN_RADAR;
+		      cmd->switch_time);
+	cmd->expect_beacon = ch_switch->channel->flags & IEEE80211_CHAN_RADAR;
 
-	return iwl_dvm_send_cmd(priv, &hcmd);
+	err = iwl_dvm_send_cmd(priv, &hcmd);
+	kfree(cmd);
+	return err;
 }
 
 struct iwl_lib_ops iwl6000_lib = {
-- 
cgit v1.2.3-70-g09d2


From 9a4da2cd99e4edfee1e48c5e2b4928eaefb56006 Mon Sep 17 00:00:00 2001
From: Vipul Pandya <vipul@chelsio.com>
Date: Fri, 19 Oct 2012 02:09:53 +0000
Subject: cxgb4: Remove unnecessary #ifdef condition

This patch also fixes the build failure caused due to removal of #ifdef
CONFIG_CHELSIO_T4_OFFLOAD condition

Signed-off-by: Vipul Pandya <vipul@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/ethernet/chelsio/cxgb4/cxgb4.h      | 19 ++++++++++++++++
 drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c | 29 +++++--------------------
 drivers/net/ethernet/chelsio/cxgb4/cxgb4_uld.h  |  3 +++
 3 files changed, 27 insertions(+), 24 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/ethernet/chelsio/cxgb4/cxgb4.h b/drivers/net/ethernet/chelsio/cxgb4/cxgb4.h
index a4da893ac1e..378988b5709 100644
--- a/drivers/net/ethernet/chelsio/cxgb4/cxgb4.h
+++ b/drivers/net/ethernet/chelsio/cxgb4/cxgb4.h
@@ -251,6 +251,8 @@ struct adapter_params {
 	unsigned char rev;                /* chip revision */
 	unsigned char offload;
 
+	unsigned char bypass;
+
 	unsigned int ofldq_wr_cred;
 };
 
@@ -642,6 +644,23 @@ extern int dbfifo_int_thresh;
 #define for_each_port(adapter, iter) \
 	for (iter = 0; iter < (adapter)->params.nports; ++iter)
 
+static inline int is_bypass(struct adapter *adap)
+{
+	return adap->params.bypass;
+}
+
+static inline int is_bypass_device(int device)
+{
+	/* this should be set based upon device capabilities */
+	switch (device) {
+	case 0x440b:
+	case 0x440c:
+		return 1;
+	default:
+		return 0;
+	}
+}
+
 static inline unsigned int core_ticks_per_usec(const struct adapter *adap)
 {
 	return adap->params.vpd.cclk / 1000;
diff --git a/drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c b/drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c
index 604f4f87f55..c1cde11b0c6 100644
--- a/drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c
+++ b/drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c
@@ -3513,18 +3513,6 @@ static int adap_init0_no_config(struct adapter *adapter, int reset)
 	if (ret < 0)
 		goto bye;
 
-#ifndef CONFIG_CHELSIO_T4_OFFLOAD
-	/*
-	 * If we're a pure NIC driver then disable all offloading facilities.
-	 * This will allow the firmware to optimize aspects of the hardware
-	 * configuration which will result in improved performance.
-	 */
-	caps_cmd.ofldcaps = 0;
-	caps_cmd.iscsicaps = 0;
-	caps_cmd.rdmacaps = 0;
-	caps_cmd.fcoecaps = 0;
-#endif
-
 	if (caps_cmd.niccaps & htons(FW_CAPS_CONFIG_NIC_VM)) {
 		if (!vf_acls)
 			caps_cmd.niccaps ^= htons(FW_CAPS_CONFIG_NIC_VM);
@@ -3745,6 +3733,7 @@ static int adap_init0(struct adapter *adap)
 	u32 v, port_vec;
 	enum dev_state state;
 	u32 params[7], val[7];
+	struct fw_caps_config_cmd caps_cmd;
 	int reset = 1, j;
 
 	/*
@@ -3898,6 +3887,9 @@ static int adap_init0(struct adapter *adap)
 			goto bye;
 	}
 
+	if (is_bypass_device(adap->pdev->device))
+		adap->params.bypass = 1;
+
 	/*
 	 * Grab some of our basic fundamental operating parameters.
 	 */
@@ -3940,13 +3932,12 @@ static int adap_init0(struct adapter *adap)
 		adap->tids.aftid_end = val[1];
 	}
 
-#ifdef CONFIG_CHELSIO_T4_OFFLOAD
 	/*
 	 * Get device capabilities so we can determine what resources we need
 	 * to manage.
 	 */
 	memset(&caps_cmd, 0, sizeof(caps_cmd));
-	caps_cmd.op_to_write = htonl(V_FW_CMD_OP(FW_CAPS_CONFIG_CMD) |
+	caps_cmd.op_to_write = htonl(FW_CMD_OP(FW_CAPS_CONFIG_CMD) |
 				     FW_CMD_REQUEST | FW_CMD_READ);
 	caps_cmd.retval_len16 = htonl(FW_LEN16(caps_cmd));
 	ret = t4_wr_mbox(adap, adap->mbox, &caps_cmd, sizeof(caps_cmd),
@@ -3991,15 +3982,6 @@ static int adap_init0(struct adapter *adap)
 		adap->vres.ddp.size = val[4] - val[3] + 1;
 		adap->params.ofldq_wr_cred = val[5];
 
-		params[0] = FW_PARAM_PFVF(ETHOFLD_START);
-		params[1] = FW_PARAM_PFVF(ETHOFLD_END);
-		ret = t4_query_params(adap, adap->mbox, adap->fn, 0, 2,
-				      params, val);
-		if ((val[0] != val[1]) && (ret >= 0)) {
-			adap->tids.uotid_base = val[0];
-			adap->tids.nuotids = val[1] - val[0] + 1;
-		}
-
 		adap->params.offload = 1;
 	}
 	if (caps_cmd.rdmacaps) {
@@ -4048,7 +4030,6 @@ static int adap_init0(struct adapter *adap)
 	}
 #undef FW_PARAM_PFVF
 #undef FW_PARAM_DEV
-#endif /* CONFIG_CHELSIO_T4_OFFLOAD */
 
 	/*
 	 * These are finalized by FW initialization, load their values now.
diff --git a/drivers/net/ethernet/chelsio/cxgb4/cxgb4_uld.h b/drivers/net/ethernet/chelsio/cxgb4/cxgb4_uld.h
index 1b899fea1a9..39bec73ff87 100644
--- a/drivers/net/ethernet/chelsio/cxgb4/cxgb4_uld.h
+++ b/drivers/net/ethernet/chelsio/cxgb4/cxgb4_uld.h
@@ -102,6 +102,9 @@ struct tid_info {
 	unsigned int ftid_base;
 	unsigned int aftid_base;
 	unsigned int aftid_end;
+	/* Server filter region */
+	unsigned int sftid_base;
+	unsigned int nsftids;
 
 	spinlock_t atid_lock ____cacheline_aligned_in_smp;
 	union aopen_entry *afree;
-- 
cgit v1.2.3-70-g09d2


From 8a6e29d6d037de0dd62fe6648ba9b29866db5416 Mon Sep 17 00:00:00 2001
From: Joe Jin <joe.jin@oracle.com>
Date: Sun, 21 Oct 2012 14:40:36 +0000
Subject: qla3xxx: Ensure request/response queue addr writes to the registers

Before use the request and response queue addr, make sure it has wrote
to the registers.

Signed-off-by: Joe Jin <joe.jin@oracle.com>
Cc: Jitendra Kalsaria <jitendra.kalsaria@qlogic.com>
Cc: Ron Mercer <ron.mercer@qlogic.com>
Acked-by: Jitendra Kalsaria <jitendra.kalsaria@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/ethernet/qlogic/qla3xxx.c | 9 +++++++--
 1 file changed, 7 insertions(+), 2 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/ethernet/qlogic/qla3xxx.c b/drivers/net/ethernet/qlogic/qla3xxx.c
index df09b1cb742..6407d0d77e8 100644
--- a/drivers/net/ethernet/qlogic/qla3xxx.c
+++ b/drivers/net/ethernet/qlogic/qla3xxx.c
@@ -2525,6 +2525,13 @@ static int ql_alloc_net_req_rsp_queues(struct ql3_adapter *qdev)
 	qdev->req_q_size =
 	    (u32) (NUM_REQ_Q_ENTRIES * sizeof(struct ob_mac_iocb_req));
 
+	qdev->rsp_q_size = NUM_RSP_Q_ENTRIES * sizeof(struct net_rsp_iocb);
+
+	/* The barrier is required to ensure request and response queue
+	 * addr writes to the registers.
+	 */
+	wmb();
+
 	qdev->req_q_virt_addr =
 	    pci_alloc_consistent(qdev->pdev,
 				 (size_t) qdev->req_q_size,
@@ -2536,8 +2543,6 @@ static int ql_alloc_net_req_rsp_queues(struct ql3_adapter *qdev)
 		return -ENOMEM;
 	}
 
-	qdev->rsp_q_size = NUM_RSP_Q_ENTRIES * sizeof(struct net_rsp_iocb);
-
 	qdev->rsp_q_virt_addr =
 	    pci_alloc_consistent(qdev->pdev,
 				 (size_t) qdev->rsp_q_size,
-- 
cgit v1.2.3-70-g09d2


From e408a9ff3c7c371d0e2a47a9eb8fa3de48fea30d Mon Sep 17 00:00:00 2001
From: Veaceslav Falico <vfalico@redhat.com>
Date: Mon, 22 Oct 2012 04:43:23 +0000
Subject: pch_gbe: create functions for MAC_RX {en,dis}able

Move MAC_RX-related bits into separate functions.

Signed-off-by: Veaceslav Falico <vfalico@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 .../net/ethernet/oki-semi/pch_gbe/pch_gbe_main.c   | 26 +++++++++++++++++-----
 1 file changed, 20 insertions(+), 6 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_main.c b/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_main.c
index b2a94d02a52..d5190bf94ba 100644
--- a/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_main.c
+++ b/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_main.c
@@ -420,6 +420,22 @@ static void pch_gbe_mac_reset_rx(struct pch_gbe_hw *hw)
 	return;
 }
 
+static void pch_gbe_disable_mac_rx(struct pch_gbe_hw *hw)
+{
+	u32 rctl;
+	/* Disables Receive MAC */
+	rctl = ioread32(&hw->reg->MAC_RX_EN);
+	iowrite32((rctl & ~PCH_GBE_MRE_MAC_RX_EN), &hw->reg->MAC_RX_EN);
+}
+
+static void pch_gbe_enable_mac_rx(struct pch_gbe_hw *hw)
+{
+	u32 rctl;
+	/* Enables Receive MAC */
+	rctl = ioread32(&hw->reg->MAC_RX_EN);
+	iowrite32((rctl | PCH_GBE_MRE_MAC_RX_EN), &hw->reg->MAC_RX_EN);
+}
+
 /**
  * pch_gbe_mac_init_rx_addrs - Initialize receive address's
  * @hw:	Pointer to the HW structure
@@ -913,7 +929,7 @@ static void pch_gbe_setup_rctl(struct pch_gbe_adapter *adapter)
 static void pch_gbe_configure_rx(struct pch_gbe_adapter *adapter)
 {
 	struct pch_gbe_hw *hw = &adapter->hw;
-	u32 rdba, rdlen, rctl, rxdma;
+	u32 rdba, rdlen, rxdma;
 
 	pr_debug("dma adr = 0x%08llx  size = 0x%08x\n",
 		 (unsigned long long)adapter->rx_ring->dma,
@@ -921,9 +937,7 @@ static void pch_gbe_configure_rx(struct pch_gbe_adapter *adapter)
 
 	pch_gbe_mac_force_mac_fc(hw);
 
-	/* Disables Receive MAC */
-	rctl = ioread32(&hw->reg->MAC_RX_EN);
-	iowrite32((rctl & ~PCH_GBE_MRE_MAC_RX_EN), &hw->reg->MAC_RX_EN);
+	pch_gbe_disable_mac_rx(hw);
 
 	/* Disables Receive DMA */
 	rxdma = ioread32(&hw->reg->DMA_CTRL);
@@ -1355,8 +1369,8 @@ static void pch_gbe_start_receive(struct pch_gbe_hw *hw)
 	rxdma = ioread32(&hw->reg->DMA_CTRL);
 	rxdma |= PCH_GBE_RX_DMA_EN;
 	iowrite32(rxdma, &hw->reg->DMA_CTRL);
-	/* Enables Receive */
-	iowrite32(PCH_GBE_MRE_MAC_RX_EN, &hw->reg->MAC_RX_EN);
+
+	pch_gbe_enable_mac_rx(hw);
 	return;
 }
 
-- 
cgit v1.2.3-70-g09d2


From 9c0314e111a540620441b27aeedb55f572f812f5 Mon Sep 17 00:00:00 2001
From: Veaceslav Falico <vfalico@redhat.com>
Date: Mon, 22 Oct 2012 04:43:24 +0000
Subject: pch_gbe: don't re-set RX_FIFO_ERR flag in napi_poll

If we were in RX_FIFO_ERR state and entered pch_gbe_napi_poll(), we'll
anyway clean some rx space and thus can continue to receive more packets.
Currently, we re-set the RX_FIFO_ERR in situations when we've exhausted our
budget for RX cleaning or cleaned some TX packets. Removing it gives us
+20%-40% speed increase and a lot less of RX_FIFO_ERRors reported.

Signed-off-by: Veaceslav Falico <vfalico@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_main.c | 19 ++++++-------------
 1 file changed, 6 insertions(+), 13 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_main.c b/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_main.c
index d5190bf94ba..4ffad780c7a 100644
--- a/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_main.c
+++ b/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_main.c
@@ -2419,7 +2419,6 @@ static int pch_gbe_napi_poll(struct napi_struct *napi, int budget)
 	int work_done = 0;
 	bool poll_end_flag = false;
 	bool cleaned = false;
-	u32 int_en;
 
 	pr_debug("budget : %d\n", budget);
 
@@ -2436,19 +2435,13 @@ static int pch_gbe_napi_poll(struct napi_struct *napi, int budget)
 
 	if (poll_end_flag) {
 		napi_complete(napi);
-		if (adapter->rx_stop_flag) {
-			adapter->rx_stop_flag = false;
-			pch_gbe_start_receive(&adapter->hw);
-		}
 		pch_gbe_irq_enable(adapter);
-	} else
-		if (adapter->rx_stop_flag) {
-			adapter->rx_stop_flag = false;
-			pch_gbe_start_receive(&adapter->hw);
-			int_en = ioread32(&adapter->hw.reg->INT_EN);
-			iowrite32((int_en | PCH_GBE_INT_RX_FIFO_ERR),
-				&adapter->hw.reg->INT_EN);
-		}
+	}
+
+	if (adapter->rx_stop_flag) {
+		adapter->rx_stop_flag = false;
+		pch_gbe_start_receive(&adapter->hw);
+	}
 
 	pr_debug("poll_end_flag : %d  work_done : %d  budget : %d\n",
 		 poll_end_flag, work_done, budget);
-- 
cgit v1.2.3-70-g09d2


From a35279f002c5843c2b2faaa4538963c8eb18446c Mon Sep 17 00:00:00 2001
From: Veaceslav Falico <vfalico@redhat.com>
Date: Mon, 22 Oct 2012 04:43:25 +0000
Subject: pch_gbe: don't reset MAC_RX on FIFO overflow

Currently, when FIFO_ERR happens, we stop the dma, wait for it to become
idle and then reset the whole MAC_RX logic (and after that we must re-set
multicast addresses and also re-enable MAC_RX when we're finally ready to
accept new packets). This leads to CRC errors on high number of incoming
packets and is not needed according to the datasheet.

This patch fixes it by the following steps:

1) remove this reset in pch_gbe_stop_receive(), which causes some functions
to not be used anywhere
2) remove already unused functions pch_gbe_wait_clr_bit_irq() and
pch_gbe_mac_reset_rx() to correctly build
3) move pch_gbe_enable_mac_rx() out of pch_gbe_start_receive() to
pch_gbe_up() where it's only needed after we've removed the MAC_RX reset
4) rename pch_gbe_start/stop_receive() to pch_gbe_enable/disable_dma_rx()
to more precisely reflect what the functions are now doing.

After these changes we already don't see the CRC errors and gain some
increase in RX processing speed.

Signed-off-by: Veaceslav Falico <vfalico@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 .../net/ethernet/oki-semi/pch_gbe/pch_gbe_main.c   | 66 ++--------------------
 1 file changed, 6 insertions(+), 60 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_main.c b/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_main.c
index 4ffad780c7a..a8854d04c27 100644
--- a/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_main.c
+++ b/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_main.c
@@ -338,26 +338,6 @@ static void pch_gbe_wait_clr_bit(void *reg, u32 bit)
 		pr_err("Error: busy bit is not cleared\n");
 }
 
-/**
- * pch_gbe_wait_clr_bit_irq - Wait to clear a bit for interrupt context
- * @reg:	Pointer of register
- * @busy:	Busy bit
- */
-static int pch_gbe_wait_clr_bit_irq(void *reg, u32 bit)
-{
-	u32 tmp;
-	int ret = -1;
-	/* wait busy */
-	tmp = 20;
-	while ((ioread32(reg) & bit) && --tmp)
-		udelay(5);
-	if (!tmp)
-		pr_err("Error: busy bit is not cleared\n");
-	else
-		ret = 0;
-	return ret;
-}
-
 /**
  * pch_gbe_mac_mar_set - Set MAC address register
  * @hw:	    Pointer to the HW structure
@@ -409,17 +389,6 @@ static void pch_gbe_mac_reset_hw(struct pch_gbe_hw *hw)
 	return;
 }
 
-static void pch_gbe_mac_reset_rx(struct pch_gbe_hw *hw)
-{
-	/* Read the MAC addresses. and store to the private data */
-	pch_gbe_mac_read_mac_addr(hw);
-	iowrite32(PCH_GBE_RX_RST, &hw->reg->RESET);
-	pch_gbe_wait_clr_bit_irq(&hw->reg->RESET, PCH_GBE_RX_RST);
-	/* Setup the MAC addresses */
-	pch_gbe_mac_mar_set(hw, hw->mac.addr, 0);
-	return;
-}
-
 static void pch_gbe_disable_mac_rx(struct pch_gbe_hw *hw)
 {
 	u32 rctl;
@@ -1330,38 +1299,17 @@ void pch_gbe_update_stats(struct pch_gbe_adapter *adapter)
 	spin_unlock_irqrestore(&adapter->stats_lock, flags);
 }
 
-static void pch_gbe_stop_receive(struct pch_gbe_adapter *adapter)
+static void pch_gbe_disable_dma_rx(struct pch_gbe_hw *hw)
 {
-	struct pch_gbe_hw *hw = &adapter->hw;
 	u32 rxdma;
-	u16 value;
-	int ret;
 
 	/* Disable Receive DMA */
 	rxdma = ioread32(&hw->reg->DMA_CTRL);
 	rxdma &= ~PCH_GBE_RX_DMA_EN;
 	iowrite32(rxdma, &hw->reg->DMA_CTRL);
-	/* Wait Rx DMA BUS is IDLE */
-	ret = pch_gbe_wait_clr_bit_irq(&hw->reg->RX_DMA_ST, PCH_GBE_IDLE_CHECK);
-	if (ret) {
-		/* Disable Bus master */
-		pci_read_config_word(adapter->pdev, PCI_COMMAND, &value);
-		value &= ~PCI_COMMAND_MASTER;
-		pci_write_config_word(adapter->pdev, PCI_COMMAND, value);
-		/* Stop Receive */
-		pch_gbe_mac_reset_rx(hw);
-		/* Enable Bus master */
-		value |= PCI_COMMAND_MASTER;
-		pci_write_config_word(adapter->pdev, PCI_COMMAND, value);
-	} else {
-		/* Stop Receive */
-		pch_gbe_mac_reset_rx(hw);
-	}
-	/* reprogram multicast address register after reset */
-	pch_gbe_set_multi(adapter->netdev);
 }
 
-static void pch_gbe_start_receive(struct pch_gbe_hw *hw)
+static void pch_gbe_enable_dma_rx(struct pch_gbe_hw *hw)
 {
 	u32 rxdma;
 
@@ -1369,9 +1317,6 @@ static void pch_gbe_start_receive(struct pch_gbe_hw *hw)
 	rxdma = ioread32(&hw->reg->DMA_CTRL);
 	rxdma |= PCH_GBE_RX_DMA_EN;
 	iowrite32(rxdma, &hw->reg->DMA_CTRL);
-
-	pch_gbe_enable_mac_rx(hw);
-	return;
 }
 
 /**
@@ -1407,7 +1352,7 @@ static irqreturn_t pch_gbe_intr(int irq, void *data)
 			int_en = ioread32(&hw->reg->INT_EN);
 			iowrite32((int_en & ~PCH_GBE_INT_RX_FIFO_ERR),
 				  &hw->reg->INT_EN);
-			pch_gbe_stop_receive(adapter);
+			pch_gbe_disable_dma_rx(&adapter->hw);
 			int_st |= ioread32(&hw->reg->INT_ST);
 			int_st = int_st & ioread32(&hw->reg->INT_EN);
 		}
@@ -2014,7 +1959,8 @@ int pch_gbe_up(struct pch_gbe_adapter *adapter)
 	pch_gbe_alloc_tx_buffers(adapter, tx_ring);
 	pch_gbe_alloc_rx_buffers(adapter, rx_ring, rx_ring->count);
 	adapter->tx_queue_len = netdev->tx_queue_len;
-	pch_gbe_start_receive(&adapter->hw);
+	pch_gbe_enable_dma_rx(&adapter->hw);
+	pch_gbe_enable_mac_rx(&adapter->hw);
 
 	mod_timer(&adapter->watchdog_timer, jiffies);
 
@@ -2440,7 +2386,7 @@ static int pch_gbe_napi_poll(struct napi_struct *napi, int budget)
 
 	if (adapter->rx_stop_flag) {
 		adapter->rx_stop_flag = false;
-		pch_gbe_start_receive(&adapter->hw);
+		pch_gbe_enable_dma_rx(&adapter->hw);
 	}
 
 	pr_debug("poll_end_flag : %d  work_done : %d  budget : %d\n",
-- 
cgit v1.2.3-70-g09d2


From 3cf164c8dee834cef9dac4e7325f89a207339ac8 Mon Sep 17 00:00:00 2001
From: Or Gerlitz <ogerlitz@mellanox.com>
Date: Sun, 21 Oct 2012 14:59:22 +0000
Subject: mlx4_core: Remove annoying debug messages from SR-IOV flow

These debug prints left behind by commits c82e9aa0a8bc ("mlx4_core:
resource tracking for HCA resources used by guests"), 54679e148287
("mlx4: Implement QP paravirtualization and maintain phys_pkey_cache
for smp_snoop") and 993c401e2079 ("mlx4_core: Add IB port-state
machine and port mgmt event propagation") make it pretty hard to
actually use the mlx4_core debug messages when running in SRIOV/IB
mode -- for example, the module load sequence of a device with one VF
yielded 631 debug prints, with 408 of them being from this set.  Let's
just remove them.

Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
---
 drivers/net/ethernet/mellanox/mlx4/eq.c               | 6 ------
 drivers/net/ethernet/mellanox/mlx4/resource_tracker.c | 6 ------
 2 files changed, 12 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/ethernet/mellanox/mlx4/eq.c b/drivers/net/ethernet/mellanox/mlx4/eq.c
index 51c764901ad..194221b75b9 100644
--- a/drivers/net/ethernet/mellanox/mlx4/eq.c
+++ b/drivers/net/ethernet/mellanox/mlx4/eq.c
@@ -329,9 +329,6 @@ int set_and_calc_slave_port_state(struct mlx4_dev *dev, int slave,
 	ctx = &priv->mfunc.master.slave_state[slave];
 	spin_lock_irqsave(&ctx->lock, flags);
 
-	mlx4_dbg(dev, "%s: slave: %d, current state: %d new event :%d\n",
-		 __func__, slave, cur_state, event);
-
 	switch (cur_state) {
 	case SLAVE_PORT_DOWN:
 		if (MLX4_PORT_STATE_DEV_EVENT_PORT_UP == event)
@@ -366,9 +363,6 @@ int set_and_calc_slave_port_state(struct mlx4_dev *dev, int slave,
 			goto out;
 	}
 	ret = mlx4_get_slave_port_state(dev, slave, port);
-	mlx4_dbg(dev, "%s: slave: %d, current state: %d new event"
-		 " :%d gen_event: %d\n",
-		 __func__, slave, cur_state, event, *gen_event);
 
 out:
 	spin_unlock_irqrestore(&ctx->lock, flags);
diff --git a/drivers/net/ethernet/mellanox/mlx4/resource_tracker.c b/drivers/net/ethernet/mellanox/mlx4/resource_tracker.c
index 926c911c0ac..b05705f50f0 100644
--- a/drivers/net/ethernet/mellanox/mlx4/resource_tracker.c
+++ b/drivers/net/ethernet/mellanox/mlx4/resource_tracker.c
@@ -330,9 +330,6 @@ static void update_pkey_index(struct mlx4_dev *dev, int slave,
 
 	new_index = priv->virt2phys_pkey[slave][port - 1][orig_index];
 	*(u8 *)(inbox->buf + 35) = new_index;
-
-	mlx4_dbg(dev, "port = %d, orig pkey index = %d, "
-		 "new pkey index = %d\n", port, orig_index, new_index);
 }
 
 static void update_gid(struct mlx4_dev *dev, struct mlx4_cmd_mailbox *inbox,
@@ -351,9 +348,6 @@ static void update_gid(struct mlx4_dev *dev, struct mlx4_cmd_mailbox *inbox,
 		if (optpar & MLX4_QP_OPTPAR_ALT_ADDR_PATH)
 			qp_ctx->alt_path.mgid_index = slave & 0x7F;
 	}
-
-	mlx4_dbg(dev, "slave %d, new gid index: 0x%x ",
-		slave, qp_ctx->pri_path.mgid_index);
 }
 
 static int mpt_mask(struct mlx4_dev *dev)
-- 
cgit v1.2.3-70-g09d2


From 41929ed2656bab8af1734bf5d0088385e72e294f Mon Sep 17 00:00:00 2001
From: Dotan Barak <dotanb@dev.mellanox.co.il>
Date: Sun, 21 Oct 2012 14:59:23 +0000
Subject: mlx4_core: Perform correct resource cleanup if mlx4_QUERY_ADAPTER()
 fails

Fixed the resource cleanup to act correctly and prevent a kernel oops when
mlx4_QUERY_ADAPTER() fails.

Signed-off-by: Dotan Barak <dotanb@dev.mellanox.co.il>
Reviewed-by: Jack Morgenstein <jackm@dev.mellanox.co.il>
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
---
 drivers/net/ethernet/mellanox/mlx4/main.c | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

(limited to 'drivers/net')

diff --git a/drivers/net/ethernet/mellanox/mlx4/main.c b/drivers/net/ethernet/mellanox/mlx4/main.c
index 80df2ab0177..2aa80afd98d 100644
--- a/drivers/net/ethernet/mellanox/mlx4/main.c
+++ b/drivers/net/ethernet/mellanox/mlx4/main.c
@@ -1405,7 +1405,10 @@ unmap_bf:
 	unmap_bf_area(dev);
 
 err_close:
-	mlx4_close_hca(dev);
+	if (mlx4_is_slave(dev))
+		mlx4_slave_exit(dev);
+	else
+		mlx4_CLOSE_HCA(dev, 0);
 
 err_free_icm:
 	if (!mlx4_is_slave(dev))
-- 
cgit v1.2.3-70-g09d2


From bb698ca41ba574b3066ebbc5766e5980ae0051ca Mon Sep 17 00:00:00 2001
From: Wolfgang Grandegger <wg@grandegger.com>
Date: Wed, 10 Oct 2012 21:10:42 +0200
Subject: can: flexcan: disable bus error interrupts for the i.MX6q

This patch adds some Flexcan version info and removes the feature flag
FLEXCAN_HAS_BROKEN_ERR_STATE for the i.MX6Q. It also has the line [TR]WRN_INT
properly connected.

Cc: Hui Wang <jason77.wang@gmail.com>
Cc: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
[mkl: convert to incremental patch]
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
---
 drivers/net/can/flexcan.c | 19 ++++++++++++++++---
 1 file changed, 16 insertions(+), 3 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/can/flexcan.c b/drivers/net/can/flexcan.c
index c78ecfca1e4..a412bf6d73e 100644
--- a/drivers/net/can/flexcan.c
+++ b/drivers/net/can/flexcan.c
@@ -144,9 +144,22 @@
 
 #define FLEXCAN_MB_CODE_MASK		(0xf0ffffff)
 
-/* FLEXCAN hardware feature flags */
+/*
+ * FLEXCAN hardware feature flags
+ *
+ * Below is some version info we got:
+ *    SOC   Version   IP-Version  Glitch-  [TR]WRN_INT
+ *                                Filter?   connected?
+ *   MX25  FlexCAN2  03.00.00.00     no         no
+ *   MX28  FlexCAN2  03.00.04.00    yes        yes
+ *   MX35  FlexCAN2  03.00.00.00     no         no
+ *   MX53  FlexCAN2  03.00.00.00    yes         no
+ *   MX6s  FlexCAN3  10.00.12.00    yes        yes
+ *
+ * Some SOCs do not have the RX_WARN & TX_WARN interrupt line connected.
+ */
 #define FLEXCAN_HAS_V10_FEATURES	BIT(1) /* For core version >= 10 */
-#define FLEXCAN_HAS_BROKEN_ERR_STATE	BIT(2) /* Broken error state handling */
+#define FLEXCAN_HAS_BROKEN_ERR_STATE	BIT(2) /* [TR]WRN_INT not connected */
 
 /* Structure of the message buffer */
 struct flexcan_mb {
@@ -205,7 +218,7 @@ static struct flexcan_devtype_data fsl_p1010_devtype_data = {
 };
 static struct flexcan_devtype_data fsl_imx28_devtype_data;
 static struct flexcan_devtype_data fsl_imx6q_devtype_data = {
-	.features = FLEXCAN_HAS_V10_FEATURES | FLEXCAN_HAS_BROKEN_ERR_STATE,
+	.features = FLEXCAN_HAS_V10_FEATURES,
 };
 
 static const struct can_bittiming_const flexcan_bittiming_const = {
-- 
cgit v1.2.3-70-g09d2


From fc09e3672ed623f9c8e73ded3cbcd2cfcf304aac Mon Sep 17 00:00:00 2001
From: Stephane Grosjean <s.grosjean@peak-system.com>
Date: Tue, 23 Oct 2012 12:37:17 +0200
Subject: can: sja1000: fix/add miniPCIe/cPCI PC/104Plus PCI/104e PEAK-System
 boards

This patch adds the support for 4 new PCI boards based on the SJA1000 CAN
controller, from PEAK-System Technik:

. PCAN-miniPCIe (PCI-Express Mini slots, available as single or dual-channel)
. PCAN-cPCI (CompactPCI format, available as single or dual-channel)
. PCAN-PC/104-Plus (PC/104-Plus system, av. as 1, 2 or 4 channels)
. PCAN-PCI/104-Express (PCI/104-Express system, av. as 1 or 2 channels)

This patch also fixes a typo in existing "PEAK_MPCI_DEVICE_ID" identifier
(missing "e" for Express). Finally, it also changes the author as well as it
updates the module supported devices list.

Signed-off-by: Stephane Grosjean <s.grosjean@peak-system.com>
Acked-by: Oliver Hartkopp <socketcan@hartkopp.net>
Acked-by: Wolfgang Grandegger <wg@grandegger.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
---
 drivers/net/can/sja1000/peak_pci.c | 13 +++++++++++--
 1 file changed, 11 insertions(+), 2 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/can/sja1000/peak_pci.c b/drivers/net/can/sja1000/peak_pci.c
index f5b82aeb254..6525dbcca4e 100644
--- a/drivers/net/can/sja1000/peak_pci.c
+++ b/drivers/net/can/sja1000/peak_pci.c
@@ -30,9 +30,10 @@
 
 #include "sja1000.h"
 
-MODULE_AUTHOR("Wolfgang Grandegger <wg@grandegger.com>");
+MODULE_AUTHOR("Stephane Grosjean <s.grosjean@peak-system.com>");
 MODULE_DESCRIPTION("Socket-CAN driver for PEAK PCAN PCI family cards");
 MODULE_SUPPORTED_DEVICE("PEAK PCAN PCI/PCIe/PCIeC miniPCI CAN cards");
+MODULE_SUPPORTED_DEVICE("PEAK PCAN miniPCIe/cPCI PC/104+ PCI/104e CAN Cards");
 MODULE_LICENSE("GPL v2");
 
 #define DRV_NAME  "peak_pci"
@@ -64,7 +65,11 @@ struct peak_pci_chan {
 #define PEAK_PCI_DEVICE_ID	0x0001	/* for PCI/PCIe slot cards */
 #define PEAK_PCIEC_DEVICE_ID	0x0002	/* for ExpressCard slot cards */
 #define PEAK_PCIE_DEVICE_ID	0x0003	/* for nextgen PCIe slot cards */
-#define PEAK_MPCI_DEVICE_ID	0x0008	/* The miniPCI slot cards */
+#define PEAK_CPCI_DEVICE_ID	0x0004	/* for nextgen cPCI slot cards */
+#define PEAK_MPCI_DEVICE_ID	0x0005	/* for nextgen miniPCI slot cards */
+#define PEAK_PC_104P_DEVICE_ID	0x0006	/* PCAN-PC/104+ cards */
+#define PEAK_PCI_104E_DEVICE_ID	0x0007	/* PCAN-PCI/104 Express cards */
+#define PEAK_MPCIE_DEVICE_ID	0x0008	/* The miniPCIe slot cards */
 
 #define PEAK_PCI_CHAN_MAX	4
 
@@ -76,6 +81,10 @@ static DEFINE_PCI_DEVICE_TABLE(peak_pci_tbl) = {
 	{PEAK_PCI_VENDOR_ID, PEAK_PCI_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID,},
 	{PEAK_PCI_VENDOR_ID, PEAK_PCIE_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID,},
 	{PEAK_PCI_VENDOR_ID, PEAK_MPCI_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID,},
+	{PEAK_PCI_VENDOR_ID, PEAK_MPCIE_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID,},
+	{PEAK_PCI_VENDOR_ID, PEAK_PC_104P_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID,},
+	{PEAK_PCI_VENDOR_ID, PEAK_PCI_104E_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID,},
+	{PEAK_PCI_VENDOR_ID, PEAK_CPCI_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID,},
 #ifdef CONFIG_CAN_PEAK_PCIEC
 	{PEAK_PCI_VENDOR_ID, PEAK_PCIEC_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID,},
 #endif
-- 
cgit v1.2.3-70-g09d2


From 0c7e92075f6e61bfc90ec2664c034b04bc157315 Mon Sep 17 00:00:00 2001
From: Christian Lamparter <chunkeey@googlemail.com>
Date: Sun, 14 Oct 2012 22:15:48 +0200
Subject: rtlwifi: pass rx setup error code to caller

If _rtl_usb_receive fails, the device is
probably not ready. Hence the error code
should be passed to the caller, so it can
react accordingly and notify the user.

Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>
Acked-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/rtlwifi/usb.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/rtlwifi/usb.c b/drivers/net/wireless/rtlwifi/usb.c
index 030beb45d8b..e3ea4b34688 100644
--- a/drivers/net/wireless/rtlwifi/usb.c
+++ b/drivers/net/wireless/rtlwifi/usb.c
@@ -673,7 +673,7 @@ static int rtl_usb_start(struct ieee80211_hw *hw)
 		set_hal_start(rtlhal);
 
 		/* Start bulk IN */
-		_rtl_usb_receive(hw);
+		err = _rtl_usb_receive(hw);
 	}
 
 	return err;
-- 
cgit v1.2.3-70-g09d2


From 761ce8c41ed20ee3af77f2df527edc3f92e6f3bf Mon Sep 17 00:00:00 2001
From: Stanislaw Gruszka <sgruszka@redhat.com>
Date: Tue, 16 Oct 2012 14:34:12 +0200
Subject: rt2x00: usb: fix reset resume

Patch fixes warnings like below happened on resume:

WARNING: at net/mac80211/driver-ops.h:12 check_sdata_in_driver+0x32/0x34()

Problem is that in __ieee80211_susped() we remove sdata (i.e wlan0
interface) and then during resume we call usb_unbind_interface() ->
ieee80211_unregister_hw() with sdata removed.

Patch fixes problem by adding .reset_resume calback, hence we do not
unbind usb device on resume. This callback can be the same as normal
.resume callback, sice we do all needed initalization during interface
start, which is performed on resume [ ieee80211_resume() ->
ieee80211_reconfig() -> rt2x00mac_start() -> rt2x00lib_start ].

Resolves:
https://bugzilla.kernel.org/show_bug.cgi?id=48041

Reported-by: David Herrmann <dh.herrmann@googlemail.com>
Reported-and-tested-by: Stephen Boyd <bebarino@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
Acked-by: Gertjan van Wingerde <gwingerde@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/rt2x00/rt2500usb.c | 1 +
 drivers/net/wireless/rt2x00/rt2800usb.c | 1 +
 drivers/net/wireless/rt2x00/rt73usb.c   | 1 +
 3 files changed, 3 insertions(+)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/rt2x00/rt2500usb.c b/drivers/net/wireless/rt2x00/rt2500usb.c
index a12e84f892b..6b2e1e431dd 100644
--- a/drivers/net/wireless/rt2x00/rt2500usb.c
+++ b/drivers/net/wireless/rt2x00/rt2500usb.c
@@ -1988,6 +1988,7 @@ static struct usb_driver rt2500usb_driver = {
 	.disconnect	= rt2x00usb_disconnect,
 	.suspend	= rt2x00usb_suspend,
 	.resume		= rt2x00usb_resume,
+	.reset_resume	= rt2x00usb_resume,
 	.disable_hub_initiated_lpm = 1,
 };
 
diff --git a/drivers/net/wireless/rt2x00/rt2800usb.c b/drivers/net/wireless/rt2x00/rt2800usb.c
index c9e9370eb78..3b8fb5a603f 100644
--- a/drivers/net/wireless/rt2x00/rt2800usb.c
+++ b/drivers/net/wireless/rt2x00/rt2800usb.c
@@ -1282,6 +1282,7 @@ static struct usb_driver rt2800usb_driver = {
 	.disconnect	= rt2x00usb_disconnect,
 	.suspend	= rt2x00usb_suspend,
 	.resume		= rt2x00usb_resume,
+	.reset_resume	= rt2x00usb_resume,
 	.disable_hub_initiated_lpm = 1,
 };
 
diff --git a/drivers/net/wireless/rt2x00/rt73usb.c b/drivers/net/wireless/rt2x00/rt73usb.c
index e5eb43b3eee..24eec66e9fd 100644
--- a/drivers/net/wireless/rt2x00/rt73usb.c
+++ b/drivers/net/wireless/rt2x00/rt73usb.c
@@ -2535,6 +2535,7 @@ static struct usb_driver rt73usb_driver = {
 	.disconnect	= rt2x00usb_disconnect,
 	.suspend	= rt2x00usb_suspend,
 	.resume		= rt2x00usb_resume,
+	.reset_resume	= rt2x00usb_resume,
 	.disable_hub_initiated_lpm = 1,
 };
 
-- 
cgit v1.2.3-70-g09d2


From 763cbac07674a648f1377b21ca66f577c103fa9a Mon Sep 17 00:00:00 2001
From: Mohammed Shafi Shajakhan <mohammed@qca.qualcomm.com>
Date: Tue, 16 Oct 2012 21:31:49 +0530
Subject: ath9k_htc: Add PID/VID for a Ubiquiti WiFiStation

Roger says, Ubiquiti produce 2 versions of their WiFiStation USB adapter.  One
has an internal antenna, the other has an external antenna and
name suffix EXT.  They have separate USB ids and in distribution
openSUSE 12.2 (kernel 3.4.6), file /usr/share/usb.ids shows:

  0cf3  Atheros Communications, Inc.
       ...
       b002  Ubiquiti WiFiStation 802.11n [Atheros AR9271]
       b003  Ubiquiti WiFiStationEXT 802.11n [Atheros AR9271]

Add b002 Ubiquiti WiFiStation in the PID/VID list.

Reported-by: Roger Price <ath9k@rogerprice.org>
Signed-off-by: Mohammed Shafi Shajakhan <mohammed@qca.qualcomm.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/ath/ath9k/hif_usb.c | 1 +
 1 file changed, 1 insertion(+)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/ath/ath9k/hif_usb.c b/drivers/net/wireless/ath/ath9k/hif_usb.c
index 924c4616c3d..f5dda84176c 100644
--- a/drivers/net/wireless/ath/ath9k/hif_usb.c
+++ b/drivers/net/wireless/ath/ath9k/hif_usb.c
@@ -38,6 +38,7 @@ static struct usb_device_id ath9k_hif_usb_ids[] = {
 	{ USB_DEVICE(0x04CA, 0x4605) }, /* Liteon */
 	{ USB_DEVICE(0x040D, 0x3801) }, /* VIA */
 	{ USB_DEVICE(0x0cf3, 0xb003) }, /* Ubiquiti WifiStation Ext */
+	{ USB_DEVICE(0x0cf3, 0xb002) }, /* Ubiquiti WifiStation */
 	{ USB_DEVICE(0x057c, 0x8403) }, /* AVM FRITZ!WLAN 11N v2 USB */
 
 	{ USB_DEVICE(0x0cf3, 0x7015),
-- 
cgit v1.2.3-70-g09d2


From 73b26df5fa1a6245d6fc982362518b620bc7c2fe Mon Sep 17 00:00:00 2001
From: Felix Fietkau <nbd@openwrt.org>
Date: Wed, 17 Oct 2012 13:50:43 +0200
Subject: Revert "ath9k_hw: Updated AR9003 tx gain table for 5GHz"

This reverts commit a240dc7b3c7463bd60cf0a9b2a90f52f78aae0fd.

This commit is reducing tx power by at least 10 db on some devices,
e.g. the Buffalo WZR-HP-G450H.

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Cc: stable@vger.kernel.org
Cc: rmanohar@qca.qualcomm.com
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 .../net/wireless/ath/ath9k/ar9003_2p2_initvals.h   | 164 ++++++++++-----------
 1 file changed, 82 insertions(+), 82 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/ath/ath9k/ar9003_2p2_initvals.h b/drivers/net/wireless/ath/ath9k/ar9003_2p2_initvals.h
index 89bf94d4d8a..6f7cf49eff4 100644
--- a/drivers/net/wireless/ath/ath9k/ar9003_2p2_initvals.h
+++ b/drivers/net/wireless/ath/ath9k/ar9003_2p2_initvals.h
@@ -534,107 +534,107 @@ static const u32 ar9300_2p2_baseband_core[][2] = {
 
 static const u32 ar9300Modes_high_power_tx_gain_table_2p2[][5] = {
 	/* Addr      5G_HT20     5G_HT40     2G_HT40     2G_HT20   */
-	{0x0000a2dc, 0x000cfff0, 0x000cfff0, 0x03aaa352, 0x03aaa352},
-	{0x0000a2e0, 0x000f0000, 0x000f0000, 0x03ccc584, 0x03ccc584},
-	{0x0000a2e4, 0x03f00000, 0x03f00000, 0x03f0f800, 0x03f0f800},
+	{0x0000a2dc, 0x00033800, 0x00033800, 0x03aaa352, 0x03aaa352},
+	{0x0000a2e0, 0x0003c000, 0x0003c000, 0x03ccc584, 0x03ccc584},
+	{0x0000a2e4, 0x03fc0000, 0x03fc0000, 0x03f0f800, 0x03f0f800},
 	{0x0000a2e8, 0x00000000, 0x00000000, 0x03ff0000, 0x03ff0000},
 	{0x0000a410, 0x000050d9, 0x000050d9, 0x000050d9, 0x000050d9},
 	{0x0000a500, 0x00000000, 0x00000000, 0x00000000, 0x00000000},
 	{0x0000a504, 0x06000003, 0x06000003, 0x04000002, 0x04000002},
 	{0x0000a508, 0x0a000020, 0x0a000020, 0x08000004, 0x08000004},
 	{0x0000a50c, 0x10000023, 0x10000023, 0x0b000200, 0x0b000200},
-	{0x0000a510, 0x15000028, 0x15000028, 0x0f000202, 0x0f000202},
-	{0x0000a514, 0x1b00002b, 0x1b00002b, 0x12000400, 0x12000400},
-	{0x0000a518, 0x1f020028, 0x1f020028, 0x16000402, 0x16000402},
-	{0x0000a51c, 0x2502002b, 0x2502002b, 0x19000404, 0x19000404},
-	{0x0000a520, 0x2a04002a, 0x2a04002a, 0x1c000603, 0x1c000603},
-	{0x0000a524, 0x2e06002a, 0x2e06002a, 0x21000a02, 0x21000a02},
-	{0x0000a528, 0x3302202d, 0x3302202d, 0x25000a04, 0x25000a04},
-	{0x0000a52c, 0x3804202c, 0x3804202c, 0x28000a20, 0x28000a20},
-	{0x0000a530, 0x3c06202c, 0x3c06202c, 0x2c000e20, 0x2c000e20},
-	{0x0000a534, 0x4108202d, 0x4108202d, 0x30000e22, 0x30000e22},
-	{0x0000a538, 0x4506402d, 0x4506402d, 0x34000e24, 0x34000e24},
-	{0x0000a53c, 0x4906222d, 0x4906222d, 0x38001640, 0x38001640},
-	{0x0000a540, 0x4d062231, 0x4d062231, 0x3c001660, 0x3c001660},
-	{0x0000a544, 0x50082231, 0x50082231, 0x3f001861, 0x3f001861},
-	{0x0000a548, 0x5608422e, 0x5608422e, 0x43001a81, 0x43001a81},
-	{0x0000a54c, 0x5a08442e, 0x5a08442e, 0x47001a83, 0x47001a83},
-	{0x0000a550, 0x5e0a4431, 0x5e0a4431, 0x4a001c84, 0x4a001c84},
-	{0x0000a554, 0x640a4432, 0x640a4432, 0x4e001ce3, 0x4e001ce3},
-	{0x0000a558, 0x680a4434, 0x680a4434, 0x52001ce5, 0x52001ce5},
-	{0x0000a55c, 0x6c0a6434, 0x6c0a6434, 0x56001ce9, 0x56001ce9},
-	{0x0000a560, 0x6f0a6633, 0x6f0a6633, 0x5a001ceb, 0x5a001ceb},
-	{0x0000a564, 0x730c6634, 0x730c6634, 0x5d001eec, 0x5d001eec},
-	{0x0000a568, 0x730c6634, 0x730c6634, 0x5d001eec, 0x5d001eec},
-	{0x0000a56c, 0x730c6634, 0x730c6634, 0x5d001eec, 0x5d001eec},
-	{0x0000a570, 0x730c6634, 0x730c6634, 0x5d001eec, 0x5d001eec},
-	{0x0000a574, 0x730c6634, 0x730c6634, 0x5d001eec, 0x5d001eec},
-	{0x0000a578, 0x730c6634, 0x730c6634, 0x5d001eec, 0x5d001eec},
-	{0x0000a57c, 0x730c6634, 0x730c6634, 0x5d001eec, 0x5d001eec},
+	{0x0000a510, 0x16000220, 0x16000220, 0x0f000202, 0x0f000202},
+	{0x0000a514, 0x1c000223, 0x1c000223, 0x12000400, 0x12000400},
+	{0x0000a518, 0x21002220, 0x21002220, 0x16000402, 0x16000402},
+	{0x0000a51c, 0x27002223, 0x27002223, 0x19000404, 0x19000404},
+	{0x0000a520, 0x2b022220, 0x2b022220, 0x1c000603, 0x1c000603},
+	{0x0000a524, 0x2f022222, 0x2f022222, 0x21000a02, 0x21000a02},
+	{0x0000a528, 0x34022225, 0x34022225, 0x25000a04, 0x25000a04},
+	{0x0000a52c, 0x3a02222a, 0x3a02222a, 0x28000a20, 0x28000a20},
+	{0x0000a530, 0x3e02222c, 0x3e02222c, 0x2c000e20, 0x2c000e20},
+	{0x0000a534, 0x4202242a, 0x4202242a, 0x30000e22, 0x30000e22},
+	{0x0000a538, 0x4702244a, 0x4702244a, 0x34000e24, 0x34000e24},
+	{0x0000a53c, 0x4b02244c, 0x4b02244c, 0x38001640, 0x38001640},
+	{0x0000a540, 0x4e02246c, 0x4e02246c, 0x3c001660, 0x3c001660},
+	{0x0000a544, 0x52022470, 0x52022470, 0x3f001861, 0x3f001861},
+	{0x0000a548, 0x55022490, 0x55022490, 0x43001a81, 0x43001a81},
+	{0x0000a54c, 0x59022492, 0x59022492, 0x47001a83, 0x47001a83},
+	{0x0000a550, 0x5d022692, 0x5d022692, 0x4a001c84, 0x4a001c84},
+	{0x0000a554, 0x61022892, 0x61022892, 0x4e001ce3, 0x4e001ce3},
+	{0x0000a558, 0x65024890, 0x65024890, 0x52001ce5, 0x52001ce5},
+	{0x0000a55c, 0x69024892, 0x69024892, 0x56001ce9, 0x56001ce9},
+	{0x0000a560, 0x6e024c92, 0x6e024c92, 0x5a001ceb, 0x5a001ceb},
+	{0x0000a564, 0x74026e92, 0x74026e92, 0x5d001eec, 0x5d001eec},
+	{0x0000a568, 0x74026e92, 0x74026e92, 0x5d001eec, 0x5d001eec},
+	{0x0000a56c, 0x74026e92, 0x74026e92, 0x5d001eec, 0x5d001eec},
+	{0x0000a570, 0x74026e92, 0x74026e92, 0x5d001eec, 0x5d001eec},
+	{0x0000a574, 0x74026e92, 0x74026e92, 0x5d001eec, 0x5d001eec},
+	{0x0000a578, 0x74026e92, 0x74026e92, 0x5d001eec, 0x5d001eec},
+	{0x0000a57c, 0x74026e92, 0x74026e92, 0x5d001eec, 0x5d001eec},
 	{0x0000a580, 0x00800000, 0x00800000, 0x00800000, 0x00800000},
 	{0x0000a584, 0x06800003, 0x06800003, 0x04800002, 0x04800002},
 	{0x0000a588, 0x0a800020, 0x0a800020, 0x08800004, 0x08800004},
 	{0x0000a58c, 0x10800023, 0x10800023, 0x0b800200, 0x0b800200},
-	{0x0000a590, 0x15800028, 0x15800028, 0x0f800202, 0x0f800202},
-	{0x0000a594, 0x1b80002b, 0x1b80002b, 0x12800400, 0x12800400},
-	{0x0000a598, 0x1f820028, 0x1f820028, 0x16800402, 0x16800402},
-	{0x0000a59c, 0x2582002b, 0x2582002b, 0x19800404, 0x19800404},
-	{0x0000a5a0, 0x2a84002a, 0x2a84002a, 0x1c800603, 0x1c800603},
-	{0x0000a5a4, 0x2e86002a, 0x2e86002a, 0x21800a02, 0x21800a02},
-	{0x0000a5a8, 0x3382202d, 0x3382202d, 0x25800a04, 0x25800a04},
-	{0x0000a5ac, 0x3884202c, 0x3884202c, 0x28800a20, 0x28800a20},
-	{0x0000a5b0, 0x3c86202c, 0x3c86202c, 0x2c800e20, 0x2c800e20},
-	{0x0000a5b4, 0x4188202d, 0x4188202d, 0x30800e22, 0x30800e22},
-	{0x0000a5b8, 0x4586402d, 0x4586402d, 0x34800e24, 0x34800e24},
-	{0x0000a5bc, 0x4986222d, 0x4986222d, 0x38801640, 0x38801640},
-	{0x0000a5c0, 0x4d862231, 0x4d862231, 0x3c801660, 0x3c801660},
-	{0x0000a5c4, 0x50882231, 0x50882231, 0x3f801861, 0x3f801861},
-	{0x0000a5c8, 0x5688422e, 0x5688422e, 0x43801a81, 0x43801a81},
-	{0x0000a5cc, 0x5a88442e, 0x5a88442e, 0x47801a83, 0x47801a83},
-	{0x0000a5d0, 0x5e8a4431, 0x5e8a4431, 0x4a801c84, 0x4a801c84},
-	{0x0000a5d4, 0x648a4432, 0x648a4432, 0x4e801ce3, 0x4e801ce3},
-	{0x0000a5d8, 0x688a4434, 0x688a4434, 0x52801ce5, 0x52801ce5},
-	{0x0000a5dc, 0x6c8a6434, 0x6c8a6434, 0x56801ce9, 0x56801ce9},
-	{0x0000a5e0, 0x6f8a6633, 0x6f8a6633, 0x5a801ceb, 0x5a801ceb},
-	{0x0000a5e4, 0x738c6634, 0x738c6634, 0x5d801eec, 0x5d801eec},
-	{0x0000a5e8, 0x738c6634, 0x738c6634, 0x5d801eec, 0x5d801eec},
-	{0x0000a5ec, 0x738c6634, 0x738c6634, 0x5d801eec, 0x5d801eec},
-	{0x0000a5f0, 0x738c6634, 0x738c6634, 0x5d801eec, 0x5d801eec},
-	{0x0000a5f4, 0x738c6634, 0x738c6634, 0x5d801eec, 0x5d801eec},
-	{0x0000a5f8, 0x738c6634, 0x738c6634, 0x5d801eec, 0x5d801eec},
-	{0x0000a5fc, 0x738c6634, 0x738c6634, 0x5d801eec, 0x5d801eec},
+	{0x0000a590, 0x16800220, 0x16800220, 0x0f800202, 0x0f800202},
+	{0x0000a594, 0x1c800223, 0x1c800223, 0x12800400, 0x12800400},
+	{0x0000a598, 0x21802220, 0x21802220, 0x16800402, 0x16800402},
+	{0x0000a59c, 0x27802223, 0x27802223, 0x19800404, 0x19800404},
+	{0x0000a5a0, 0x2b822220, 0x2b822220, 0x1c800603, 0x1c800603},
+	{0x0000a5a4, 0x2f822222, 0x2f822222, 0x21800a02, 0x21800a02},
+	{0x0000a5a8, 0x34822225, 0x34822225, 0x25800a04, 0x25800a04},
+	{0x0000a5ac, 0x3a82222a, 0x3a82222a, 0x28800a20, 0x28800a20},
+	{0x0000a5b0, 0x3e82222c, 0x3e82222c, 0x2c800e20, 0x2c800e20},
+	{0x0000a5b4, 0x4282242a, 0x4282242a, 0x30800e22, 0x30800e22},
+	{0x0000a5b8, 0x4782244a, 0x4782244a, 0x34800e24, 0x34800e24},
+	{0x0000a5bc, 0x4b82244c, 0x4b82244c, 0x38801640, 0x38801640},
+	{0x0000a5c0, 0x4e82246c, 0x4e82246c, 0x3c801660, 0x3c801660},
+	{0x0000a5c4, 0x52822470, 0x52822470, 0x3f801861, 0x3f801861},
+	{0x0000a5c8, 0x55822490, 0x55822490, 0x43801a81, 0x43801a81},
+	{0x0000a5cc, 0x59822492, 0x59822492, 0x47801a83, 0x47801a83},
+	{0x0000a5d0, 0x5d822692, 0x5d822692, 0x4a801c84, 0x4a801c84},
+	{0x0000a5d4, 0x61822892, 0x61822892, 0x4e801ce3, 0x4e801ce3},
+	{0x0000a5d8, 0x65824890, 0x65824890, 0x52801ce5, 0x52801ce5},
+	{0x0000a5dc, 0x69824892, 0x69824892, 0x56801ce9, 0x56801ce9},
+	{0x0000a5e0, 0x6e824c92, 0x6e824c92, 0x5a801ceb, 0x5a801ceb},
+	{0x0000a5e4, 0x74826e92, 0x74826e92, 0x5d801eec, 0x5d801eec},
+	{0x0000a5e8, 0x74826e92, 0x74826e92, 0x5d801eec, 0x5d801eec},
+	{0x0000a5ec, 0x74826e92, 0x74826e92, 0x5d801eec, 0x5d801eec},
+	{0x0000a5f0, 0x74826e92, 0x74826e92, 0x5d801eec, 0x5d801eec},
+	{0x0000a5f4, 0x74826e92, 0x74826e92, 0x5d801eec, 0x5d801eec},
+	{0x0000a5f8, 0x74826e92, 0x74826e92, 0x5d801eec, 0x5d801eec},
+	{0x0000a5fc, 0x74826e92, 0x74826e92, 0x5d801eec, 0x5d801eec},
 	{0x0000a600, 0x00000000, 0x00000000, 0x00000000, 0x00000000},
 	{0x0000a604, 0x00000000, 0x00000000, 0x00000000, 0x00000000},
-	{0x0000a608, 0x01804601, 0x01804601, 0x00000000, 0x00000000},
-	{0x0000a60c, 0x01804601, 0x01804601, 0x00000000, 0x00000000},
-	{0x0000a610, 0x01804601, 0x01804601, 0x00000000, 0x00000000},
-	{0x0000a614, 0x01804601, 0x01804601, 0x01404000, 0x01404000},
-	{0x0000a618, 0x01804601, 0x01804601, 0x01404501, 0x01404501},
-	{0x0000a61c, 0x01804601, 0x01804601, 0x02008501, 0x02008501},
-	{0x0000a620, 0x03408d02, 0x03408d02, 0x0280ca03, 0x0280ca03},
-	{0x0000a624, 0x0300cc03, 0x0300cc03, 0x03010c04, 0x03010c04},
-	{0x0000a628, 0x03410d04, 0x03410d04, 0x04014c04, 0x04014c04},
-	{0x0000a62c, 0x03410d04, 0x03410d04, 0x04015005, 0x04015005},
-	{0x0000a630, 0x03410d04, 0x03410d04, 0x04015005, 0x04015005},
-	{0x0000a634, 0x03410d04, 0x03410d04, 0x04015005, 0x04015005},
-	{0x0000a638, 0x03410d04, 0x03410d04, 0x04015005, 0x04015005},
-	{0x0000a63c, 0x03410d04, 0x03410d04, 0x04015005, 0x04015005},
-	{0x0000b2dc, 0x000cfff0, 0x000cfff0, 0x03aaa352, 0x03aaa352},
-	{0x0000b2e0, 0x000f0000, 0x000f0000, 0x03ccc584, 0x03ccc584},
-	{0x0000b2e4, 0x03f00000, 0x03f00000, 0x03f0f800, 0x03f0f800},
+	{0x0000a608, 0x00000000, 0x00000000, 0x00000000, 0x00000000},
+	{0x0000a60c, 0x00000000, 0x00000000, 0x00000000, 0x00000000},
+	{0x0000a610, 0x00000000, 0x00000000, 0x00000000, 0x00000000},
+	{0x0000a614, 0x02004000, 0x02004000, 0x01404000, 0x01404000},
+	{0x0000a618, 0x02004801, 0x02004801, 0x01404501, 0x01404501},
+	{0x0000a61c, 0x02808a02, 0x02808a02, 0x02008501, 0x02008501},
+	{0x0000a620, 0x0380ce03, 0x0380ce03, 0x0280ca03, 0x0280ca03},
+	{0x0000a624, 0x04411104, 0x04411104, 0x03010c04, 0x03010c04},
+	{0x0000a628, 0x04411104, 0x04411104, 0x04014c04, 0x04014c04},
+	{0x0000a62c, 0x04411104, 0x04411104, 0x04015005, 0x04015005},
+	{0x0000a630, 0x04411104, 0x04411104, 0x04015005, 0x04015005},
+	{0x0000a634, 0x04411104, 0x04411104, 0x04015005, 0x04015005},
+	{0x0000a638, 0x04411104, 0x04411104, 0x04015005, 0x04015005},
+	{0x0000a63c, 0x04411104, 0x04411104, 0x04015005, 0x04015005},
+	{0x0000b2dc, 0x00033800, 0x00033800, 0x03aaa352, 0x03aaa352},
+	{0x0000b2e0, 0x0003c000, 0x0003c000, 0x03ccc584, 0x03ccc584},
+	{0x0000b2e4, 0x03fc0000, 0x03fc0000, 0x03f0f800, 0x03f0f800},
 	{0x0000b2e8, 0x00000000, 0x00000000, 0x03ff0000, 0x03ff0000},
-	{0x0000c2dc, 0x000cfff0, 0x000cfff0, 0x03aaa352, 0x03aaa352},
-	{0x0000c2e0, 0x000f0000, 0x000f0000, 0x03ccc584, 0x03ccc584},
-	{0x0000c2e4, 0x03f00000, 0x03f00000, 0x03f0f800, 0x03f0f800},
+	{0x0000c2dc, 0x00033800, 0x00033800, 0x03aaa352, 0x03aaa352},
+	{0x0000c2e0, 0x0003c000, 0x0003c000, 0x03ccc584, 0x03ccc584},
+	{0x0000c2e4, 0x03fc0000, 0x03fc0000, 0x03f0f800, 0x03f0f800},
 	{0x0000c2e8, 0x00000000, 0x00000000, 0x03ff0000, 0x03ff0000},
 	{0x00016044, 0x012492d4, 0x012492d4, 0x012492d4, 0x012492d4},
-	{0x00016048, 0x61200001, 0x61200001, 0x66480001, 0x66480001},
+	{0x00016048, 0x66480001, 0x66480001, 0x66480001, 0x66480001},
 	{0x00016068, 0x6db6db6c, 0x6db6db6c, 0x6db6db6c, 0x6db6db6c},
 	{0x00016444, 0x012492d4, 0x012492d4, 0x012492d4, 0x012492d4},
-	{0x00016448, 0x61200001, 0x61200001, 0x66480001, 0x66480001},
+	{0x00016448, 0x66480001, 0x66480001, 0x66480001, 0x66480001},
 	{0x00016468, 0x6db6db6c, 0x6db6db6c, 0x6db6db6c, 0x6db6db6c},
 	{0x00016844, 0x012492d4, 0x012492d4, 0x012492d4, 0x012492d4},
-	{0x00016848, 0x61200001, 0x61200001, 0x66480001, 0x66480001},
+	{0x00016848, 0x66480001, 0x66480001, 0x66480001, 0x66480001},
 	{0x00016868, 0x6db6db6c, 0x6db6db6c, 0x6db6db6c, 0x6db6db6c},
 };
 
-- 
cgit v1.2.3-70-g09d2


From 9495b31ad7e2b479501abb36a62789d59ee406fc Mon Sep 17 00:00:00 2001
From: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Date: Thu, 18 Oct 2012 18:10:56 +0800
Subject: brcmfmac: fix potential NULL dereference

Fix a samtch warnings catched by Fengguang's 0-DAY system:
+ drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c:3572 brcmf_cfg80211_sched_scan_start() error: we previously assumed 'request' could be null (see line 3571)

Cc: John W. Linville <linville@tuxdriver.com>
Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Acked-by: Franky Lin <frankyl@broadcom.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c b/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c
index 411dfe7c7ff..a6f1e816600 100644
--- a/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c
+++ b/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c
@@ -3569,7 +3569,7 @@ brcmf_cfg80211_sched_scan_start(struct wiphy *wiphy,
 
 	if (!request || !request->n_ssids || !request->n_match_sets) {
 		WL_ERR("Invalid sched scan req!! n_ssids:%d\n",
-		       request->n_ssids);
+		       request ? request->n_ssids : 0);
 		return -EINVAL;
 	}
 
-- 
cgit v1.2.3-70-g09d2


From dcd5c79c9a3a7ac08bdce089fec810677ce6efe8 Mon Sep 17 00:00:00 2001
From: Bing Zhao <bzhao@marvell.com>
Date: Fri, 19 Oct 2012 19:01:59 -0700
Subject: mwifiex: return -EBUSY if specific scan request cannot be honored

Previous patch "mwifiex: return -EBUSY if scan request cannot.."
corrected regular scan request only. There is another case for
specific scan that needs the same handling.

Also, removed !req_ssid check as it has already been validated
by caller.

Signed-off-by: Bing Zhao <bzhao@marvell.com>
Signed-off-by: Paul Stewart <pstew@chromium.org>
Reviewed-by: Ryan Cairns <rtc@chromium.org>
Signed-off-by: Amitkumar Karwar <akarwar@marvell.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/mwifiex/scan.c | 13 +++++--------
 1 file changed, 5 insertions(+), 8 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/mwifiex/scan.c b/drivers/net/wireless/mwifiex/scan.c
index 00b658d3b6e..9171aaedbcc 100644
--- a/drivers/net/wireless/mwifiex/scan.c
+++ b/drivers/net/wireless/mwifiex/scan.c
@@ -1843,21 +1843,18 @@ static int mwifiex_scan_specific_ssid(struct mwifiex_private *priv,
 				      struct cfg80211_ssid *req_ssid)
 {
 	struct mwifiex_adapter *adapter = priv->adapter;
-	int ret = 0;
+	int ret;
 	struct mwifiex_user_scan_cfg *scan_cfg;
 
-	if (!req_ssid)
-		return -1;
-
 	if (adapter->scan_processing) {
-		dev_dbg(adapter->dev, "cmd: Scan already in process...\n");
-		return ret;
+		dev_err(adapter->dev, "cmd: Scan already in process...\n");
+		return -EBUSY;
 	}
 
 	if (priv->scan_block) {
-		dev_dbg(adapter->dev,
+		dev_err(adapter->dev,
 			"cmd: Scan is blocked during association...\n");
-		return ret;
+		return -EBUSY;
 	}
 
 	scan_cfg = kzalloc(sizeof(struct mwifiex_user_scan_cfg), GFP_KERNEL);
-- 
cgit v1.2.3-70-g09d2


From 6fcf2b10533bf51c67f0286ddba16e958e7ed972 Mon Sep 17 00:00:00 2001
From: Bing Zhao <bzhao@marvell.com>
Date: Fri, 19 Oct 2012 19:02:00 -0700
Subject: mwifiex: clean up scan state on error

De-reference and deallocate scan state on failure.

Signed-off-by: Bing Zhao <bzhao@marvell.com>
Signed-off-by: Paul Stewart <pstew@chromium.org>
Tested-by: Paul Stewart <pstew@chromium.org>
Reviewed-by: Ryan Cairns <rtc@chromium.org>
Signed-off-by: Amitkumar Karwar <akarwar@marvell.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/mwifiex/cfg80211.c | 7 +++++--
 1 file changed, 5 insertions(+), 2 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/mwifiex/cfg80211.c b/drivers/net/wireless/mwifiex/cfg80211.c
index 0679458a1ba..780d3e16829 100644
--- a/drivers/net/wireless/mwifiex/cfg80211.c
+++ b/drivers/net/wireless/mwifiex/cfg80211.c
@@ -1825,8 +1825,6 @@ mwifiex_cfg80211_scan(struct wiphy *wiphy,
 		return -EBUSY;
 	}
 
-	priv->scan_request = request;
-
 	priv->user_scan_cfg = kzalloc(sizeof(struct mwifiex_user_scan_cfg),
 				      GFP_KERNEL);
 	if (!priv->user_scan_cfg) {
@@ -1834,6 +1832,8 @@ mwifiex_cfg80211_scan(struct wiphy *wiphy,
 		return -ENOMEM;
 	}
 
+	priv->scan_request = request;
+
 	priv->user_scan_cfg->num_ssids = request->n_ssids;
 	priv->user_scan_cfg->ssid_list = request->ssids;
 
@@ -1870,6 +1870,9 @@ mwifiex_cfg80211_scan(struct wiphy *wiphy,
 	ret = mwifiex_scan_networks(priv, priv->user_scan_cfg);
 	if (ret) {
 		dev_err(priv->adapter->dev, "scan failed: %d\n", ret);
+		priv->scan_request = NULL;
+		kfree(priv->user_scan_cfg);
+		priv->user_scan_cfg = NULL;
 		return ret;
 	}
 
-- 
cgit v1.2.3-70-g09d2


From f89ff6441df06abc2d95f3ef67525923032d6283 Mon Sep 17 00:00:00 2001
From: Larry Finger <Larry.Finger@lwfinger.net>
Date: Wed, 24 Oct 2012 08:57:16 -0500
Subject: b43: Fix oops on unload when firmware not found

When b43 fails to find firmware when loaded, a subsequent unload will
oops due to calling ieee80211_unregister_hw() when the corresponding
register call was never made.

Commit 2d838bb608e2d1f6cb4280e76748cb812dc822e7 fixed the same problem
for b43legacy.

Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Tested-by: Markus Kanet <dvmailing@gmx.eu>
Cc: Stable <stable@vger.kernel.org> [V3.3.0+ (the patch will need to be refactored)]
Cc: Markus Kanet <dvmailing@gmx.eu>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/b43/main.c | 4 ++++
 1 file changed, 4 insertions(+)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/b43/main.c b/drivers/net/wireless/b43/main.c
index 73730e94e0a..c5a99c8c816 100644
--- a/drivers/net/wireless/b43/main.c
+++ b/drivers/net/wireless/b43/main.c
@@ -5404,6 +5404,8 @@ static void b43_bcma_remove(struct bcma_device *core)
 	cancel_work_sync(&wldev->restart_work);
 
 	B43_WARN_ON(!wl);
+	if (!wldev->fw.ucode.data)
+		return;			/* NULL if firmware never loaded */
 	if (wl->current_dev == wldev && wl->hw_registred) {
 		b43_leds_stop(wldev);
 		ieee80211_unregister_hw(wl->hw);
@@ -5478,6 +5480,8 @@ static void b43_ssb_remove(struct ssb_device *sdev)
 	cancel_work_sync(&wldev->restart_work);
 
 	B43_WARN_ON(!wl);
+	if (!wldev->fw.ucode.data)
+		return;			/* NULL if firmware never loaded */
 	if (wl->current_dev == wldev && wl->hw_registred) {
 		b43_leds_stop(wldev);
 		ieee80211_unregister_hw(wl->hw);
-- 
cgit v1.2.3-70-g09d2


From a2fc66ce9f4669daeebc03d6891917b894c752a8 Mon Sep 17 00:00:00 2001
From: Veaceslav Falico <vfalico@redhat.com>
Date: Tue, 23 Oct 2012 04:54:34 +0000
Subject: pch_gbe: fix error handling in pch_gbe_up()

If we fail to allocate rx buffers pool by any reason, we'll just return
with an error, however we've previously successfully requested an irq. Fix
this by releasing the irq before returning the error.

Signed-off-by: Veaceslav Falico <vfalico@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_main.c | 17 +++++++++++------
 1 file changed, 11 insertions(+), 6 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_main.c b/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_main.c
index a8854d04c27..4c4fe5b1a29 100644
--- a/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_main.c
+++ b/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_main.c
@@ -1930,12 +1930,12 @@ int pch_gbe_up(struct pch_gbe_adapter *adapter)
 	struct net_device *netdev = adapter->netdev;
 	struct pch_gbe_tx_ring *tx_ring = adapter->tx_ring;
 	struct pch_gbe_rx_ring *rx_ring = adapter->rx_ring;
-	int err;
+	int err = -EINVAL;
 
 	/* Ensure we have a valid MAC */
 	if (!is_valid_ether_addr(adapter->hw.mac.addr)) {
 		pr_err("Error: Invalid MAC address\n");
-		return -EINVAL;
+		goto out;
 	}
 
 	/* hardware has been reset, we need to reload some things */
@@ -1948,13 +1948,13 @@ int pch_gbe_up(struct pch_gbe_adapter *adapter)
 
 	err = pch_gbe_request_irq(adapter);
 	if (err) {
-		pr_err("Error: can't bring device up\n");
-		return err;
+		pr_err("Error: can't bring device up - irq request failed\n");
+		goto out;
 	}
 	err = pch_gbe_alloc_rx_buffers_pool(adapter, rx_ring, rx_ring->count);
 	if (err) {
-		pr_err("Error: can't bring device up\n");
-		return err;
+		pr_err("Error: can't bring device up - alloc rx buffers pool failed\n");
+		goto freeirq;
 	}
 	pch_gbe_alloc_tx_buffers(adapter, tx_ring);
 	pch_gbe_alloc_rx_buffers(adapter, rx_ring, rx_ring->count);
@@ -1969,6 +1969,11 @@ int pch_gbe_up(struct pch_gbe_adapter *adapter)
 	netif_start_queue(adapter->netdev);
 
 	return 0;
+
+freeirq:
+	pch_gbe_free_irq(adapter);
+out:
+	return err;
 }
 
 /**
-- 
cgit v1.2.3-70-g09d2


From b2b3392cfc0f5af0f621b3d95aba459f2d5c0e28 Mon Sep 17 00:00:00 2001
From: Peter Korsgaard <jacmet@sunsite.dk>
Date: Tue, 23 Oct 2012 12:11:55 +0000
Subject: NET_VENDOR_TI: make available for am33xx as well

The cpsw/davinci mdio ip cores are present on am33xx, so make NET_VENDOR_TI
visible for it as well.

Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/ethernet/ti/Kconfig | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'drivers/net')

diff --git a/drivers/net/ethernet/ti/Kconfig b/drivers/net/ethernet/ti/Kconfig
index b26cbda5efa..2c41894d547 100644
--- a/drivers/net/ethernet/ti/Kconfig
+++ b/drivers/net/ethernet/ti/Kconfig
@@ -5,7 +5,7 @@
 config NET_VENDOR_TI
 	bool "Texas Instruments (TI) devices"
 	default y
-	depends on PCI || EISA || AR7 || (ARM && (ARCH_DAVINCI || ARCH_OMAP3))
+	depends on PCI || EISA || AR7 || (ARM && (ARCH_DAVINCI || ARCH_OMAP3 || SOC_AM33XX))
 	---help---
 	  If you have a network (Ethernet) card belonging to this class, say Y
 	  and read the Ethernet-HOWTO, available from
-- 
cgit v1.2.3-70-g09d2


From 2b9c128e9580e79db48bd3aacb2b4873544e01e8 Mon Sep 17 00:00:00 2001
From: Wei Yang <Wei.Yang@windriver.com>
Date: Wed, 24 Oct 2012 05:21:36 +0000
Subject: gianfar_ptp: use iomem, not ioports resource tree in probe

When using a 36 bit dtb file, the driver complains "resource busy".

Investigating the source of the message leads one to the
gianfar_ptp_probe function.

Since the type of the device resource requested in this function
is IORESOURCE_MEM, it should use "iomem_resource" instead of
"ioports_resource".

Signed-off-by: Wei Yang <Wei.Yang@windriver.com>
Cc: Claudiu Manoil <claudiu.manoil@freescale.com>
Cc: Timur Tabi <timur@freescale.com>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/ethernet/freescale/gianfar_ptp.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'drivers/net')

diff --git a/drivers/net/ethernet/freescale/gianfar_ptp.c b/drivers/net/ethernet/freescale/gianfar_ptp.c
index b9db0e04056..2e5daee0438 100644
--- a/drivers/net/ethernet/freescale/gianfar_ptp.c
+++ b/drivers/net/ethernet/freescale/gianfar_ptp.c
@@ -478,7 +478,7 @@ static int gianfar_ptp_probe(struct platform_device *dev)
 		pr_err("no resource\n");
 		goto no_resource;
 	}
-	if (request_resource(&ioport_resource, etsects->rsrc)) {
+	if (request_resource(&iomem_resource, etsects->rsrc)) {
 		pr_err("resource busy\n");
 		goto no_resource;
 	}
-- 
cgit v1.2.3-70-g09d2


From 7208ca300725ebc1dd4c60511ed67a69c684eb91 Mon Sep 17 00:00:00 2001
From: Jack Morgenstein <jackm@dev.mellanox.co.il>
Date: Thu, 25 Oct 2012 01:12:47 +0000
Subject: net/mlx4_en: Fix double-release-range in tx-rings

The QP range is reserved as a single block. However, when freeing the
en resources, the tx-ring QPs are released both in mlx4_en_destroy_tx_ring
(one at a time) and in mlx4_en_free_resources (as a block release).

Fix by eliminating the one-at-a-time release in mlx4_en_destroy_tx_ring.

Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il>
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/ethernet/mellanox/mlx4/en_tx.c | 1 -
 1 file changed, 1 deletion(-)

(limited to 'drivers/net')

diff --git a/drivers/net/ethernet/mellanox/mlx4/en_tx.c b/drivers/net/ethernet/mellanox/mlx4/en_tx.c
index c10e3a6de09..0a51095fd8d 100644
--- a/drivers/net/ethernet/mellanox/mlx4/en_tx.c
+++ b/drivers/net/ethernet/mellanox/mlx4/en_tx.c
@@ -143,7 +143,6 @@ void mlx4_en_destroy_tx_ring(struct mlx4_en_priv *priv,
 		mlx4_bf_free(mdev->dev, &ring->bf);
 	mlx4_qp_remove(mdev->dev, &ring->qp);
 	mlx4_qp_free(mdev->dev, &ring->qp);
-	mlx4_qp_release_range(mdev->dev, ring->qpn, 1);
 	mlx4_en_unmap_buffer(&ring->wqres.buf);
 	mlx4_free_hwq_res(mdev->dev, &ring->wqres, ring->buf_size);
 	kfree(ring->bounce_buf);
-- 
cgit v1.2.3-70-g09d2


From 2b39a06198a0fbaf44a69f435c5d2b4280a0c10e Mon Sep 17 00:00:00 2001
From: Moni Shoua <monis@mellanox.co.il>
Date: Thu, 25 Oct 2012 01:12:48 +0000
Subject: net/mlx4_en: Don't use vlan tag value as an indication for vlan
 presence

The vlan tag can be zero. This is why it can't serve as an indication
that packet requires VLAN header in the TX flow.

Signed-off-by: Moni Shoua <monis@mellanox.com>
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/ethernet/mellanox/mlx4/en_tx.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'drivers/net')

diff --git a/drivers/net/ethernet/mellanox/mlx4/en_tx.c b/drivers/net/ethernet/mellanox/mlx4/en_tx.c
index 0a51095fd8d..b35094c590b 100644
--- a/drivers/net/ethernet/mellanox/mlx4/en_tx.c
+++ b/drivers/net/ethernet/mellanox/mlx4/en_tx.c
@@ -711,7 +711,7 @@ netdev_tx_t mlx4_en_xmit(struct sk_buff *skb, struct net_device *dev)
 	if (bounce)
 		tx_desc = mlx4_en_bounce_to_desc(priv, ring, index, desc_size);
 
-	if (ring->bf_enabled && desc_size <= MAX_BF && !bounce && !vlan_tag) {
+	if (ring->bf_enabled && desc_size <= MAX_BF && !bounce && !vlan_tx_tag_present(skb)) {
 		*(__be32 *) (&tx_desc->ctrl.vlan_tag) |= cpu_to_be32(ring->doorbell_qpn);
 		op_own |= htonl((bf_index & 0xffff) << 8);
 		/* Ensure new descirptor hits memory
-- 
cgit v1.2.3-70-g09d2


From bfc0d8c3de31a51e671e2c1564fd194fa6b00179 Mon Sep 17 00:00:00 2001
From: Dotan Barak <dotanb@dev.mellanox.co.il>
Date: Thu, 25 Oct 2012 01:12:49 +0000
Subject: net/mlx4_core: Unmap UAR also in the case of error flow

If a failure takes place during the EQ creation, we need to unmap the
UAR memory block too.

Signed-off-by: Dotan Barak <dotanb@dev.mellanox.co.il>
Signed-off-by: Uri Habusha <urih@mellanox.com>
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/ethernet/mellanox/mlx4/eq.c | 18 ++++++++++++++----
 1 file changed, 14 insertions(+), 4 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/ethernet/mellanox/mlx4/eq.c b/drivers/net/ethernet/mellanox/mlx4/eq.c
index 51c764901ad..083767b55c8 100644
--- a/drivers/net/ethernet/mellanox/mlx4/eq.c
+++ b/drivers/net/ethernet/mellanox/mlx4/eq.c
@@ -843,6 +843,18 @@ static void __iomem *mlx4_get_eq_uar(struct mlx4_dev *dev, struct mlx4_eq *eq)
 	return priv->eq_table.uar_map[index] + 0x800 + 8 * (eq->eqn % 4);
 }
 
+static void mlx4_unmap_uar(struct mlx4_dev *dev)
+{
+	struct mlx4_priv *priv = mlx4_priv(dev);
+	int i;
+
+	for (i = 0; i < mlx4_num_eq_uar(dev); ++i)
+		if (priv->eq_table.uar_map[i]) {
+			iounmap(priv->eq_table.uar_map[i]);
+			priv->eq_table.uar_map[i] = NULL;
+		}
+}
+
 static int mlx4_create_eq(struct mlx4_dev *dev, int nent,
 			  u8 intr, struct mlx4_eq *eq)
 {
@@ -1207,6 +1219,7 @@ err_out_unmap:
 	mlx4_free_irqs(dev);
 
 err_out_bitmap:
+	mlx4_unmap_uar(dev);
 	mlx4_bitmap_cleanup(&priv->eq_table.bitmap);
 
 err_out_free:
@@ -1231,10 +1244,7 @@ void mlx4_cleanup_eq_table(struct mlx4_dev *dev)
 	if (!mlx4_is_slave(dev))
 		mlx4_unmap_clr_int(dev);
 
-	for (i = 0; i < mlx4_num_eq_uar(dev); ++i)
-		if (priv->eq_table.uar_map[i])
-			iounmap(priv->eq_table.uar_map[i]);
-
+	mlx4_unmap_uar(dev);
 	mlx4_bitmap_cleanup(&priv->eq_table.bitmap);
 
 	kfree(priv->eq_table.uar_map);
-- 
cgit v1.2.3-70-g09d2


From 39707c2a3ba5011038b363f84d37c8a98d2d9db1 Mon Sep 17 00:00:00 2001
From: Hemant Kumar <hemantk@codeaurora.org>
Date: Thu, 25 Oct 2012 18:17:54 +0000
Subject: net: usb: Fix memory leak on Tx data path

Driver anchors the tx urbs and defers the urb submission if
a transmit request comes when the interface is suspended.
Anchoring urb increments the urb reference count. These
deferred urbs are later accessed by calling usb_get_from_anchor()
for submission during interface resume. usb_get_from_anchor()
unanchors the urb but urb reference count remains same.
This causes the urb reference count to remain non-zero
after usb_free_urb() gets called and urb never gets freed.
Hence call usb_put_urb() after anchoring the urb to properly
balance the reference count for these deferred urbs. Also,
unanchor these deferred urbs during disconnect, to free them
up.

Signed-off-by: Hemant Kumar <hemantk@codeaurora.org>
Acked-by: Oliver Neukum <oneukum@suse.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/usb/usbnet.c | 3 +++
 1 file changed, 3 insertions(+)

(limited to 'drivers/net')

diff --git a/drivers/net/usb/usbnet.c b/drivers/net/usb/usbnet.c
index f9819d10b1f..cb04f900cc4 100644
--- a/drivers/net/usb/usbnet.c
+++ b/drivers/net/usb/usbnet.c
@@ -1158,6 +1158,7 @@ netdev_tx_t usbnet_start_xmit (struct sk_buff *skb,
 		usb_anchor_urb(urb, &dev->deferred);
 		/* no use to process more packets */
 		netif_stop_queue(net);
+		usb_put_urb(urb);
 		spin_unlock_irqrestore(&dev->txq.lock, flags);
 		netdev_dbg(dev->net, "Delaying transmission for resumption\n");
 		goto deferred;
@@ -1310,6 +1311,8 @@ void usbnet_disconnect (struct usb_interface *intf)
 
 	cancel_work_sync(&dev->kevent);
 
+	usb_scuttle_anchored_urbs(&dev->deferred);
+
 	if (dev->driver_info->unbind)
 		dev->driver_info->unbind (dev, intf);
 
-- 
cgit v1.2.3-70-g09d2


From f8295ec22cb0f1ee6849b862addbfa3ea9320755 Mon Sep 17 00:00:00 2001
From: Dan Williams <dcbw@redhat.com>
Date: Wed, 24 Oct 2012 12:10:34 +0000
Subject: qmi_wwan/cdc_ether: move Novatel 551 and E362 to qmi_wwan
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

These devices provide QMI and ethernet functionality via a standard CDC
ethernet descriptor.  But when driven by cdc_ether, the QMI
functionality is unavailable because only cdc_ether can claim the USB
interface.  Thus blacklist the devices in cdc_ether and add their IDs to
qmi_wwan, which enables both QMI and ethernet simultaneously.

Signed-off-by: Dan Williams <dcbw@redhat.com>
Cc: stable@vger.kernel.org
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Bjørn Mork <bjorn@mork.no>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/usb/cdc_ether.c | 41 ++++++++++++++++++++++++++---------------
 drivers/net/usb/qmi_wwan.c  | 14 ++++++++++++++
 2 files changed, 40 insertions(+), 15 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/usb/cdc_ether.c b/drivers/net/usb/cdc_ether.c
index a03de719704..d0129827602 100644
--- a/drivers/net/usb/cdc_ether.c
+++ b/drivers/net/usb/cdc_ether.c
@@ -592,6 +592,32 @@ static const struct usb_device_id	products [] = {
 	.driver_info		= 0,
 },
 
+/* Novatel USB551L and MC551 - handled by qmi_wwan */
+{
+	.match_flags    =   USB_DEVICE_ID_MATCH_VENDOR
+		 | USB_DEVICE_ID_MATCH_PRODUCT
+		 | USB_DEVICE_ID_MATCH_INT_INFO,
+	.idVendor               = NOVATEL_VENDOR_ID,
+	.idProduct		= 0xB001,
+	.bInterfaceClass	= USB_CLASS_COMM,
+	.bInterfaceSubClass	= USB_CDC_SUBCLASS_ETHERNET,
+	.bInterfaceProtocol	= USB_CDC_PROTO_NONE,
+	.driver_info = 0,
+},
+
+/* Novatel E362 - handled by qmi_wwan */
+{
+	.match_flags    =   USB_DEVICE_ID_MATCH_VENDOR
+		 | USB_DEVICE_ID_MATCH_PRODUCT
+		 | USB_DEVICE_ID_MATCH_INT_INFO,
+	.idVendor               = NOVATEL_VENDOR_ID,
+	.idProduct		= 0x9010,
+	.bInterfaceClass	= USB_CLASS_COMM,
+	.bInterfaceSubClass	= USB_CDC_SUBCLASS_ETHERNET,
+	.bInterfaceProtocol	= USB_CDC_PROTO_NONE,
+	.driver_info = 0,
+},
+
 /*
  * WHITELIST!!!
  *
@@ -604,21 +630,6 @@ static const struct usb_device_id	products [] = {
  * because of bugs/quirks in a given product (like Zaurus, above).
  */
 {
-	/* Novatel USB551L */
-	/* This match must come *before* the generic CDC-ETHER match so that
-	 * we get FLAG_WWAN set on the device, since it's descriptors are
-	 * generic CDC-ETHER.
-	 */
-	.match_flags    =   USB_DEVICE_ID_MATCH_VENDOR
-		 | USB_DEVICE_ID_MATCH_PRODUCT
-		 | USB_DEVICE_ID_MATCH_INT_INFO,
-	.idVendor               = NOVATEL_VENDOR_ID,
-	.idProduct		= 0xB001,
-	.bInterfaceClass	= USB_CLASS_COMM,
-	.bInterfaceSubClass	= USB_CDC_SUBCLASS_ETHERNET,
-	.bInterfaceProtocol	= USB_CDC_PROTO_NONE,
-	.driver_info = (unsigned long)&wwan_info,
-}, {
 	/* ZTE (Vodafone) K3805-Z */
 	.match_flags    =   USB_DEVICE_ID_MATCH_VENDOR
 		 | USB_DEVICE_ID_MATCH_PRODUCT
diff --git a/drivers/net/usb/qmi_wwan.c b/drivers/net/usb/qmi_wwan.c
index 9d23ba2fe98..3b566fa0f8e 100644
--- a/drivers/net/usb/qmi_wwan.c
+++ b/drivers/net/usb/qmi_wwan.c
@@ -369,6 +369,20 @@ static const struct usb_device_id products[] = {
 		USB_VENDOR_AND_INTERFACE_INFO(0x106c, USB_CLASS_VENDOR_SPEC, 0xf1, 0xff),
 		.driver_info        = (unsigned long)&qmi_wwan_info,
 	},
+	{	/* Novatel USB551L and MC551 */
+		USB_DEVICE_AND_INTERFACE_INFO(0x1410, 0xb001,
+		                              USB_CLASS_COMM,
+		                              USB_CDC_SUBCLASS_ETHERNET,
+		                              USB_CDC_PROTO_NONE),
+		.driver_info        = (unsigned long)&qmi_wwan_info,
+	},
+	{	/* Novatel E362 */
+		USB_DEVICE_AND_INTERFACE_INFO(0x1410, 0x9010,
+		                              USB_CLASS_COMM,
+		                              USB_CDC_SUBCLASS_ETHERNET,
+		                              USB_CDC_PROTO_NONE),
+		.driver_info        = (unsigned long)&qmi_wwan_info,
+	},
 
 	/* 3. Combined interface devices matching on interface number */
 	{QMI_FIXED_INTF(0x19d2, 0x0002, 1)},
-- 
cgit v1.2.3-70-g09d2


From 3da3fff8006c608f19a51859d44ba47ca8b41461 Mon Sep 17 00:00:00 2001
From: Chris Metcalf <cmetcalf@tilera.com>
Date: Thu, 25 Oct 2012 07:25:20 +0000
Subject: tilegx: fix some issues in the SW TSO support

This change correctly computes the header length and data length in
the fragments to avoid a bug where we would end up with extremely
slow performance.  Also adopt use of skb_frag_size() accessor.

Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
Cc: stable@vger.kernel.org [v3.6]
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/ethernet/tile/tilegx.c | 35 +++++++++++++++++++----------------
 1 file changed, 19 insertions(+), 16 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/ethernet/tile/tilegx.c b/drivers/net/ethernet/tile/tilegx.c
index 4e2a1628484..4e981001385 100644
--- a/drivers/net/ethernet/tile/tilegx.c
+++ b/drivers/net/ethernet/tile/tilegx.c
@@ -1334,11 +1334,11 @@ static int tso_count_edescs(struct sk_buff *skb)
 {
 	struct skb_shared_info *sh = skb_shinfo(skb);
 	unsigned int sh_len = skb_transport_offset(skb) + tcp_hdrlen(skb);
-	unsigned int data_len = skb->data_len + skb->hdr_len - sh_len;
+	unsigned int data_len = skb->len - sh_len;
 	unsigned int p_len = sh->gso_size;
 	long f_id = -1;    /* id of the current fragment */
-	long f_size = skb->hdr_len;  /* size of the current fragment */
-	long f_used = sh_len;  /* bytes used from the current fragment */
+	long f_size = skb_headlen(skb) - sh_len;  /* current fragment size */
+	long f_used = 0;  /* bytes used from the current fragment */
 	long n;            /* size of the current piece of payload */
 	int num_edescs = 0;
 	int segment;
@@ -1353,7 +1353,7 @@ static int tso_count_edescs(struct sk_buff *skb)
 			/* Advance as needed. */
 			while (f_used >= f_size) {
 				f_id++;
-				f_size = sh->frags[f_id].size;
+				f_size = skb_frag_size(&sh->frags[f_id]);
 				f_used = 0;
 			}
 
@@ -1384,13 +1384,13 @@ static void tso_headers_prepare(struct sk_buff *skb, unsigned char *headers,
 	struct iphdr *ih;
 	struct tcphdr *th;
 	unsigned int sh_len = skb_transport_offset(skb) + tcp_hdrlen(skb);
-	unsigned int data_len = skb->data_len + skb->hdr_len - sh_len;
+	unsigned int data_len = skb->len - sh_len;
 	unsigned char *data = skb->data;
 	unsigned int ih_off, th_off, p_len;
 	unsigned int isum_seed, tsum_seed, id, seq;
 	long f_id = -1;    /* id of the current fragment */
-	long f_size = skb->hdr_len;  /* size of the current fragment */
-	long f_used = sh_len;  /* bytes used from the current fragment */
+	long f_size = skb_headlen(skb) - sh_len;  /* current fragment size */
+	long f_used = 0;  /* bytes used from the current fragment */
 	long n;            /* size of the current piece of payload */
 	int segment;
 
@@ -1405,7 +1405,7 @@ static void tso_headers_prepare(struct sk_buff *skb, unsigned char *headers,
 	isum_seed = ((0xFFFF - ih->check) +
 		     (0xFFFF - ih->tot_len) +
 		     (0xFFFF - ih->id));
-	tsum_seed = th->check + (0xFFFF ^ htons(sh_len + data_len));
+	tsum_seed = th->check + (0xFFFF ^ htons(skb->len));
 	id = ntohs(ih->id);
 	seq = ntohl(th->seq);
 
@@ -1444,7 +1444,7 @@ static void tso_headers_prepare(struct sk_buff *skb, unsigned char *headers,
 			/* Advance as needed. */
 			while (f_used >= f_size) {
 				f_id++;
-				f_size = sh->frags[f_id].size;
+				f_size = skb_frag_size(&sh->frags[f_id]);
 				f_used = 0;
 			}
 
@@ -1478,14 +1478,14 @@ static void tso_egress(struct net_device *dev, gxio_mpipe_equeue_t *equeue,
 	struct tile_net_priv *priv = netdev_priv(dev);
 	struct skb_shared_info *sh = skb_shinfo(skb);
 	unsigned int sh_len = skb_transport_offset(skb) + tcp_hdrlen(skb);
-	unsigned int data_len = skb->data_len + skb->hdr_len - sh_len;
+	unsigned int data_len = skb->len - sh_len;
 	unsigned int p_len = sh->gso_size;
 	gxio_mpipe_edesc_t edesc_head = { { 0 } };
 	gxio_mpipe_edesc_t edesc_body = { { 0 } };
 	long f_id = -1;    /* id of the current fragment */
-	long f_size = skb->hdr_len;  /* size of the current fragment */
-	long f_used = sh_len;  /* bytes used from the current fragment */
-	void *f_data = skb->data;
+	long f_size = skb_headlen(skb) - sh_len;  /* current fragment size */
+	long f_used = 0;  /* bytes used from the current fragment */
+	void *f_data = skb->data + sh_len;
 	long n;            /* size of the current piece of payload */
 	unsigned long tx_packets = 0, tx_bytes = 0;
 	unsigned int csum_start;
@@ -1516,15 +1516,18 @@ static void tso_egress(struct net_device *dev, gxio_mpipe_equeue_t *equeue,
 
 		/* Egress the payload. */
 		while (p_used < p_len) {
+			void *va;
 
 			/* Advance as needed. */
 			while (f_used >= f_size) {
 				f_id++;
-				f_size = sh->frags[f_id].size;
-				f_used = 0;
+				f_size = skb_frag_size(&sh->frags[f_id]);
 				f_data = tile_net_frag_buf(&sh->frags[f_id]);
+				f_used = 0;
 			}
 
+			va = f_data + f_used;
+
 			/* Use bytes from the current fragment. */
 			n = p_len - p_used;
 			if (n > f_size - f_used)
@@ -1533,7 +1536,7 @@ static void tso_egress(struct net_device *dev, gxio_mpipe_equeue_t *equeue,
 			p_used += n;
 
 			/* Egress a piece of the payload. */
-			edesc_body.va = va_to_tile_io_addr(f_data) + f_used;
+			edesc_body.va = va_to_tile_io_addr(va);
 			edesc_body.xfer_size = n;
 			edesc_body.bound = !(p_used < p_len);
 			gxio_mpipe_equeue_put_at(equeue, edesc_body, slot);
-- 
cgit v1.2.3-70-g09d2


From 8c6e30936a7893a85f6222084f0f26aceb81137a Mon Sep 17 00:00:00 2001
From: Felix Fietkau <nbd@openwrt.org>
Date: Fri, 26 Oct 2012 00:31:11 +0200
Subject: ath9k: fix stale pointers potentially causing access to free'd skbs

bf->bf_next is only while buffers are chained as part of an A-MPDU
in the tx queue. When a tid queue is flushed (e.g. on tearing down
an aggregation session), frames can be enqueued again as normal
transmission, without bf_next being cleared. This can lead to the
old pointer being dereferenced again later.

This patch might fix crashes and "Failed to stop TX DMA!" messages.

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Cc: stable@vger.kernel.org
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/ath/ath9k/xmit.c | 2 ++
 1 file changed, 2 insertions(+)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/ath/ath9k/xmit.c b/drivers/net/wireless/ath/ath9k/xmit.c
index 378bd70256b..1ffca7511fa 100644
--- a/drivers/net/wireless/ath/ath9k/xmit.c
+++ b/drivers/net/wireless/ath/ath9k/xmit.c
@@ -312,6 +312,7 @@ static struct ath_buf *ath_tx_get_buffer(struct ath_softc *sc)
 	}
 
 	bf = list_first_entry(&sc->tx.txbuf, struct ath_buf, list);
+	bf->bf_next = NULL;
 	list_del(&bf->list);
 
 	spin_unlock_bh(&sc->tx.txbuflock);
@@ -1774,6 +1775,7 @@ static void ath_tx_send_normal(struct ath_softc *sc, struct ath_txq *txq,
 	list_add_tail(&bf->list, &bf_head);
 	bf->bf_state.bf_type = 0;
 
+	bf->bf_next = NULL;
 	bf->bf_lastbf = bf;
 	ath_tx_fill_desc(sc, bf, txq, fi->framelen);
 	ath_tx_txqaddbuf(sc, txq, &bf_head, false);
-- 
cgit v1.2.3-70-g09d2


From bf7e1abe434ba9e22e8dc04a4cba4ab504b788b8 Mon Sep 17 00:00:00 2001
From: Stanislaw Gruszka <sgruszka@redhat.com>
Date: Thu, 25 Oct 2012 09:51:39 +0200
Subject: rt2800: validate step value for temperature compensation

Some hardware has correct (!= 0xff) value of tssi_bounds[4] in the
EEPROM, but step is equal to 0xff. This results on ridiculous delta
calculations and completely broke TX power settings.

Reported-and-tested-by: Pavel Lucik <pavel.lucik@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
Acked-by: Ivo van Doorn <IvDoorn@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/rt2x00/rt2800lib.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/rt2x00/rt2800lib.c b/drivers/net/wireless/rt2x00/rt2800lib.c
index 01dc8891070..59474ae0aec 100644
--- a/drivers/net/wireless/rt2x00/rt2800lib.c
+++ b/drivers/net/wireless/rt2x00/rt2800lib.c
@@ -2449,7 +2449,7 @@ static int rt2800_get_gain_calibration_delta(struct rt2x00_dev *rt2x00dev)
 	/*
 	 * Check if temperature compensation is supported.
 	 */
-	if (tssi_bounds[4] == 0xff)
+	if (tssi_bounds[4] == 0xff || step == 0xff)
 		return 0;
 
 	/*
-- 
cgit v1.2.3-70-g09d2


From 6fe7cc71bbf3a0bc28c9cec3c00bc11e81344412 Mon Sep 17 00:00:00 2001
From: Sven Eckelmann <sven@narfation.org>
Date: Mon, 29 Oct 2012 13:25:20 +0100
Subject: ath9k: Test for TID only in BlockAcks while checking tx status

The ath9k xmit functions for AMPDUs can send frames as non-aggregate in case
only one frame is currently available. The client will then answer using a
normal Ack instead of a BlockAck. This acknowledgement has no TID stored and
therefore the hardware is not able to provide us the corresponding TID.

The TID set by the hardware in the tx status descriptor has to be seen as
undefined and not as a valid TID value for normal acknowledgements. Doing
otherwise results in a massive amount of retransmissions and stalls of
connections.

Users may experience low bandwidth and complete connection stalls in
environments with transfers using multiple TIDs.

This regression was introduced in b11b160defc48e4daa283f785192ea3a23a51f8e
("ath9k: validate the TID in the tx status information").

Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Simon Wunderlich <siwu@hrz.tu-chemnitz.de>
Cc: stable@vger.kernel.org
Acked-by: Felix Fietkau <nbd@openwrt.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/ath/ath9k/xmit.c | 8 ++++++--
 1 file changed, 6 insertions(+), 2 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/ath/ath9k/xmit.c b/drivers/net/wireless/ath/ath9k/xmit.c
index 1ffca7511fa..741918a2027 100644
--- a/drivers/net/wireless/ath/ath9k/xmit.c
+++ b/drivers/net/wireless/ath/ath9k/xmit.c
@@ -394,7 +394,7 @@ static void ath_tx_complete_aggr(struct ath_softc *sc, struct ath_txq *txq,
 	u16 seq_st = 0, acked_cnt = 0, txfail_cnt = 0, seq_first;
 	u32 ba[WME_BA_BMP_SIZE >> 5];
 	int isaggr, txfail, txpending, sendbar = 0, needreset = 0, nbad = 0;
-	bool rc_update = true;
+	bool rc_update = true, isba;
 	struct ieee80211_tx_rate rates[4];
 	struct ath_frame_info *fi;
 	int nframes;
@@ -438,13 +438,17 @@ static void ath_tx_complete_aggr(struct ath_softc *sc, struct ath_txq *txq,
 	tidno = ieee80211_get_qos_ctl(hdr)[0] & IEEE80211_QOS_CTL_TID_MASK;
 	tid = ATH_AN_2_TID(an, tidno);
 	seq_first = tid->seq_start;
+	isba = ts->ts_flags & ATH9K_TX_BA;
 
 	/*
 	 * The hardware occasionally sends a tx status for the wrong TID.
 	 * In this case, the BA status cannot be considered valid and all
 	 * subframes need to be retransmitted
+	 *
+	 * Only BlockAcks have a TID and therefore normal Acks cannot be
+	 * checked
 	 */
-	if (tidno != ts->tid)
+	if (isba && tidno != ts->tid)
 		txok = false;
 
 	isaggr = bf_isaggr(bf);
-- 
cgit v1.2.3-70-g09d2


From 3c172868cbbe3eb138fd57bb346c77dffb22b182 Mon Sep 17 00:00:00 2001
From: stephen hemminger <shemminger@vyatta.com>
Date: Fri, 26 Oct 2012 06:24:34 +0000
Subject: vxlan: don't expire permanent entries

VXLAN confused flag versus bitmap on state.
Based on part of a earlier patch by David Stevens.

Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/vxlan.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'drivers/net')

diff --git a/drivers/net/vxlan.c b/drivers/net/vxlan.c
index 607976c0016..7b4adde93c0 100644
--- a/drivers/net/vxlan.c
+++ b/drivers/net/vxlan.c
@@ -816,7 +816,7 @@ static void vxlan_cleanup(unsigned long arg)
 				= container_of(p, struct vxlan_fdb, hlist);
 			unsigned long timeout;
 
-			if (f->state == NUD_PERMANENT)
+			if (f->state & NUD_PERMANENT)
 				continue;
 
 			timeout = f->used + vxlan->age_interval * HZ;
-- 
cgit v1.2.3-70-g09d2


From 50f8d35de8ba4af311ea1176c534e8b73bb198e5 Mon Sep 17 00:00:00 2001
From: Jacob Keller <jacob.e.keller@intel.com>
Date: Wed, 31 Oct 2012 22:30:54 +0000
Subject: ixgbe: PTP get_ts_info missing software support

This patch corrects the ethtool get_ts_info functon which did not state that
software timestamping was supported, even though it is.

Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
CC: Stable <stable@vger.kernel.org> [3.5]
Tested-by: Stephen Ko <stephen.s.ko@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/ethernet/intel/ixgbe/ixgbe_ethtool.c | 3 +++
 1 file changed, 3 insertions(+)

(limited to 'drivers/net')

diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_ethtool.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_ethtool.c
index 56b20d17d0e..116f0e901be 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_ethtool.c
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_ethtool.c
@@ -2673,6 +2673,9 @@ static int ixgbe_get_ts_info(struct net_device *dev,
 	case ixgbe_mac_X540:
 	case ixgbe_mac_82599EB:
 		info->so_timestamping =
+			SOF_TIMESTAMPING_TX_SOFTWARE |
+			SOF_TIMESTAMPING_RX_SOFTWARE |
+			SOF_TIMESTAMPING_SOFTWARE |
 			SOF_TIMESTAMPING_TX_HARDWARE |
 			SOF_TIMESTAMPING_RX_HARDWARE |
 			SOF_TIMESTAMPING_RAW_HARDWARE;
-- 
cgit v1.2.3-70-g09d2


From b457bcb97212c38154d941d88c13f5f63f3620d0 Mon Sep 17 00:00:00 2001
From: Yaniv Rosner <yanivr@broadcom.com>
Date: Wed, 31 Oct 2012 05:46:52 +0000
Subject: bnx2x: Fix 57810 1G-KR link against certain switches.

Fix 1G KR link by restoring CL72 misc control register to default value rather
than 0.

Signed-off-by: Yaniv Rosner <yanivr@broadcom.com>
Signed-off-by: Barak Witkowski <barak@broadcom.com>
Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c | 10 ++++++++--
 1 file changed, 8 insertions(+), 2 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c
index e2e45ee5df3..290e12a8d02 100644
--- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c
@@ -3545,12 +3545,11 @@ static void bnx2x_warpcore_set_lpi_passthrough(struct bnx2x_phy *phy,
 static void bnx2x_warpcore_enable_AN_KR(struct bnx2x_phy *phy,
 					struct link_params *params,
 					struct link_vars *vars) {
-	u16 val16 = 0, lane, i;
+	u16 val16 = 0, lane, i, cl72_ctrl;
 	struct bnx2x *bp = params->bp;
 	static struct bnx2x_reg_set reg_set[] = {
 		{MDIO_WC_DEVAD, MDIO_WC_REG_SERDESDIGITAL_CONTROL1000X2, 0x7},
 		{MDIO_AN_DEVAD, MDIO_WC_REG_PAR_DET_10G_CTRL, 0},
-		{MDIO_WC_DEVAD, MDIO_WC_REG_CL72_USERB0_CL72_MISC1_CONTROL, 0},
 		{MDIO_WC_DEVAD, MDIO_WC_REG_XGXSBLK1_LANECTRL0, 0xff},
 		{MDIO_WC_DEVAD, MDIO_WC_REG_XGXSBLK1_LANECTRL1, 0x5555},
 		{MDIO_PMA_DEVAD, MDIO_WC_REG_IEEE0BLK_AUTONEGNP, 0x0},
@@ -3565,6 +3564,13 @@ static void bnx2x_warpcore_enable_AN_KR(struct bnx2x_phy *phy,
 		bnx2x_cl45_write(bp, phy, reg_set[i].devad, reg_set[i].reg,
 				 reg_set[i].val);
 
+	bnx2x_cl45_read(bp, phy, MDIO_WC_DEVAD,
+		MDIO_WC_REG_CL72_USERB0_CL72_MISC1_CONTROL, &cl72_ctrl);
+	cl72_ctrl &= 0xf8ff;
+	cl72_ctrl |= 0x3800;
+	bnx2x_cl45_write(bp, phy, MDIO_WC_DEVAD,
+		MDIO_WC_REG_CL72_USERB0_CL72_MISC1_CONTROL, cl72_ctrl);
+
 	/* Check adding advertisement for 1G KX */
 	if (((vars->line_speed == SPEED_AUTO_NEG) &&
 	     (phy->speed_cap_mask & PORT_HW_CFG_SPEED_CAPABILITY_D0_1G)) ||
-- 
cgit v1.2.3-70-g09d2


From a75bb0010026f39910cd01d33a5baa47191539a0 Mon Sep 17 00:00:00 2001
From: Yaniv Rosner <yanivr@broadcom.com>
Date: Wed, 31 Oct 2012 05:46:53 +0000
Subject: bnx2x: Fix link down in 57712 following LFA

In case of link flap avoidance between PXE boot and bnx2x, set the appropriate
PHY DEVAD even if LFA kicks in.

Signed-off-by: Yaniv Rosner <yanivr@broadcom.com>
Signed-off-by: Barak Witkowski <barak@broadcom.com>
Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c | 23 ++++++++++++++++++-----
 1 file changed, 18 insertions(+), 5 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c
index 290e12a8d02..f2436ea641a 100644
--- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c
@@ -3295,6 +3295,21 @@ static void bnx2x_serdes_deassert(struct bnx2x *bp, u8 port)
 	       DEFAULT_PHY_DEV_ADDR);
 }
 
+static void bnx2x_xgxs_specific_func(struct bnx2x_phy *phy,
+				     struct link_params *params,
+				     u32 action)
+{
+	struct bnx2x *bp = params->bp;
+	switch (action) {
+	case PHY_INIT:
+		/* Set correct devad */
+		REG_WR(bp, NIG_REG_XGXS0_CTRL_MD_ST + params->port*0x18, 0);
+		REG_WR(bp, NIG_REG_XGXS0_CTRL_MD_DEVAD + params->port*0x18,
+		       phy->def_md_devad);
+		break;
+	}
+}
+
 static void bnx2x_xgxs_deassert(struct link_params *params)
 {
 	struct bnx2x *bp = params->bp;
@@ -3309,10 +3324,8 @@ static void bnx2x_xgxs_deassert(struct link_params *params)
 	REG_WR(bp, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_3_CLEAR, val);
 	udelay(500);
 	REG_WR(bp, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_3_SET, val);
-
-	REG_WR(bp, NIG_REG_XGXS0_CTRL_MD_ST + port*0x18, 0);
-	REG_WR(bp, NIG_REG_XGXS0_CTRL_MD_DEVAD + port*0x18,
-	       params->phy[INT_PHY].def_md_devad);
+	bnx2x_xgxs_specific_func(&params->phy[INT_PHY], params,
+				 PHY_INIT);
 }
 
 static void bnx2x_calc_ieee_aneg_adv(struct bnx2x_phy *phy,
@@ -10999,7 +11012,7 @@ static struct bnx2x_phy phy_xgxs = {
 	.format_fw_ver	= (format_fw_ver_t)NULL,
 	.hw_reset	= (hw_reset_t)NULL,
 	.set_link_led	= (set_link_led_t)NULL,
-	.phy_specific_func = (phy_specific_func_t)NULL
+	.phy_specific_func = (phy_specific_func_t)bnx2x_xgxs_specific_func
 };
 static struct bnx2x_phy phy_warpcore = {
 	.type		= PORT_HW_CFG_XGXS_EXT_PHY_TYPE_DIRECT,
-- 
cgit v1.2.3-70-g09d2


From cd1a26a3bbc797100c55594bac0546204ccb1107 Mon Sep 17 00:00:00 2001
From: Yaniv Rosner <yanivr@broadcom.com>
Date: Wed, 31 Oct 2012 05:46:54 +0000
Subject: bnx2x: Restore global registers back to default.

Several KR registers were not set correctly back to default after
loopback test, so set those global registers over the global WC lane (zero)
rather than the current lane.

Signed-off-by: Yaniv Rosner <yanivr@broadcom.com>
Signed-off-by: Barak Witkowski <barak@broadcom.com>
Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c | 78 +++++++++++++++++-------
 1 file changed, 56 insertions(+), 22 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c
index f2436ea641a..5e8f7b7a8f6 100644
--- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c
@@ -3558,13 +3558,11 @@ static void bnx2x_warpcore_set_lpi_passthrough(struct bnx2x_phy *phy,
 static void bnx2x_warpcore_enable_AN_KR(struct bnx2x_phy *phy,
 					struct link_params *params,
 					struct link_vars *vars) {
-	u16 val16 = 0, lane, i, cl72_ctrl;
+	u16 lane, i, cl72_ctrl, an_adv = 0;
+	u16 ucode_ver;
 	struct bnx2x *bp = params->bp;
 	static struct bnx2x_reg_set reg_set[] = {
 		{MDIO_WC_DEVAD, MDIO_WC_REG_SERDESDIGITAL_CONTROL1000X2, 0x7},
-		{MDIO_AN_DEVAD, MDIO_WC_REG_PAR_DET_10G_CTRL, 0},
-		{MDIO_WC_DEVAD, MDIO_WC_REG_XGXSBLK1_LANECTRL0, 0xff},
-		{MDIO_WC_DEVAD, MDIO_WC_REG_XGXSBLK1_LANECTRL1, 0x5555},
 		{MDIO_PMA_DEVAD, MDIO_WC_REG_IEEE0BLK_AUTONEGNP, 0x0},
 		{MDIO_WC_DEVAD, MDIO_WC_REG_RX66_CONTROL, 0x7415},
 		{MDIO_WC_DEVAD, MDIO_WC_REG_SERDESDIGITAL_MISC2, 0x6190},
@@ -3589,7 +3587,7 @@ static void bnx2x_warpcore_enable_AN_KR(struct bnx2x_phy *phy,
 	     (phy->speed_cap_mask & PORT_HW_CFG_SPEED_CAPABILITY_D0_1G)) ||
 	    (vars->line_speed == SPEED_1000)) {
 		u32 addr = MDIO_WC_REG_SERDESDIGITAL_CONTROL1000X2;
-		val16 |= (1<<5);
+		an_adv |= (1<<5);
 
 		/* Enable CL37 1G Parallel Detect */
 		bnx2x_cl45_read_or_write(bp, phy, MDIO_WC_DEVAD, addr, 0x1);
@@ -3599,11 +3597,14 @@ static void bnx2x_warpcore_enable_AN_KR(struct bnx2x_phy *phy,
 	     (phy->speed_cap_mask & PORT_HW_CFG_SPEED_CAPABILITY_D0_10G)) ||
 	    (vars->line_speed ==  SPEED_10000)) {
 		/* Check adding advertisement for 10G KR */
-		val16 |= (1<<7);
+		an_adv |= (1<<7);
 		/* Enable 10G Parallel Detect */
+		CL22_WR_OVER_CL45(bp, phy, MDIO_REG_BANK_AER_BLOCK,
+				  MDIO_AER_BLOCK_AER_REG, 0);
+
 		bnx2x_cl45_write(bp, phy, MDIO_AN_DEVAD,
 				 MDIO_WC_REG_PAR_DET_10G_CTRL, 1);
-
+		bnx2x_set_aer_mmd(params, phy);
 		DP(NETIF_MSG_LINK, "Advertize 10G\n");
 	}
 
@@ -3623,7 +3624,7 @@ static void bnx2x_warpcore_enable_AN_KR(struct bnx2x_phy *phy,
 
 	/* Advertised speeds */
 	bnx2x_cl45_write(bp, phy, MDIO_AN_DEVAD,
-			 MDIO_WC_REG_AN_IEEE1BLK_AN_ADVERTISEMENT1, val16);
+			 MDIO_WC_REG_AN_IEEE1BLK_AN_ADVERTISEMENT1, an_adv);
 
 	/* Advertised and set FEC (Forward Error Correction) */
 	bnx2x_cl45_write(bp, phy, MDIO_AN_DEVAD,
@@ -3647,9 +3648,10 @@ static void bnx2x_warpcore_enable_AN_KR(struct bnx2x_phy *phy,
 	/* Set KR Autoneg Work-Around flag for Warpcore version older than D108
 	 */
 	bnx2x_cl45_read(bp, phy, MDIO_WC_DEVAD,
-			MDIO_WC_REG_UC_INFO_B1_VERSION, &val16);
-	if (val16 < 0xd108) {
-		DP(NETIF_MSG_LINK, "Enable AN KR work-around\n");
+			MDIO_WC_REG_UC_INFO_B1_VERSION, &ucode_ver);
+	if (ucode_ver < 0xd108) {
+		DP(NETIF_MSG_LINK, "Enable AN KR work-around. WC ver:0x%x\n",
+			       ucode_ver);
 		vars->rx_tx_asic_rst = MAX_KR_LINK_RETRY;
 	}
 	bnx2x_cl45_read_or_write(bp, phy, MDIO_WC_DEVAD,
@@ -3670,21 +3672,16 @@ static void bnx2x_warpcore_set_10G_KR(struct bnx2x_phy *phy,
 				      struct link_vars *vars)
 {
 	struct bnx2x *bp = params->bp;
-	u16 i;
+	u16 val16, i, lane;
 	static struct bnx2x_reg_set reg_set[] = {
 		/* Disable Autoneg */
 		{MDIO_WC_DEVAD, MDIO_WC_REG_SERDESDIGITAL_CONTROL1000X2, 0x7},
-		{MDIO_AN_DEVAD, MDIO_WC_REG_PAR_DET_10G_CTRL, 0},
 		{MDIO_WC_DEVAD, MDIO_WC_REG_CL72_USERB0_CL72_MISC1_CONTROL,
 			0x3f00},
 		{MDIO_AN_DEVAD, MDIO_WC_REG_AN_IEEE1BLK_AN_ADVERTISEMENT1, 0},
 		{MDIO_AN_DEVAD, MDIO_WC_REG_IEEE0BLK_MIICNTL, 0x0},
 		{MDIO_WC_DEVAD, MDIO_WC_REG_DIGITAL3_UP1, 0x1},
 		{MDIO_WC_DEVAD, MDIO_WC_REG_DIGITAL5_MISC7, 0xa},
-		/* Disable CL36 PCS Tx */
-		{MDIO_WC_DEVAD, MDIO_WC_REG_XGXSBLK1_LANECTRL0, 0x0},
-		/* Double Wide Single Data Rate @ pll rate */
-		{MDIO_WC_DEVAD, MDIO_WC_REG_XGXSBLK1_LANECTRL1, 0xFFFF},
 		/* Leave cl72 training enable, needed for KR */
 		{MDIO_PMA_DEVAD,
 		MDIO_WC_REG_PMD_IEEE9BLK_TENGBASE_KR_PMD_CONTROL_REGISTER_150,
@@ -3695,11 +3692,24 @@ static void bnx2x_warpcore_set_10G_KR(struct bnx2x_phy *phy,
 		bnx2x_cl45_write(bp, phy, reg_set[i].devad, reg_set[i].reg,
 				 reg_set[i].val);
 
-	/* Leave CL72 enabled */
-	bnx2x_cl45_read_or_write(bp, phy, MDIO_WC_DEVAD,
-				 MDIO_WC_REG_CL72_USERB0_CL72_MISC1_CONTROL,
-				 0x3800);
+	lane = bnx2x_get_warpcore_lane(phy, params);
+	/* Global registers */
+	CL22_WR_OVER_CL45(bp, phy, MDIO_REG_BANK_AER_BLOCK,
+			  MDIO_AER_BLOCK_AER_REG, 0);
+	/* Disable CL36 PCS Tx */
+	bnx2x_cl45_read(bp, phy, MDIO_WC_DEVAD,
+			MDIO_WC_REG_XGXSBLK1_LANECTRL0, &val16);
+	val16 &= ~(0x0011 << lane);
+	bnx2x_cl45_write(bp, phy, MDIO_WC_DEVAD,
+			 MDIO_WC_REG_XGXSBLK1_LANECTRL0, val16);
 
+	bnx2x_cl45_read(bp, phy, MDIO_WC_DEVAD,
+			MDIO_WC_REG_XGXSBLK1_LANECTRL1, &val16);
+	val16 |= (0x0303 << (lane << 1));
+	bnx2x_cl45_write(bp, phy, MDIO_WC_DEVAD,
+			 MDIO_WC_REG_XGXSBLK1_LANECTRL1, val16);
+	/* Restore AER */
+	bnx2x_set_aer_mmd(params, phy);
 	/* Set speed via PMA/PMD register */
 	bnx2x_cl45_write(bp, phy, MDIO_PMA_DEVAD,
 			 MDIO_WC_REG_IEEE0BLK_MIICNTL, 0x2040);
@@ -4322,7 +4332,7 @@ static void bnx2x_warpcore_link_reset(struct bnx2x_phy *phy,
 				      struct link_params *params)
 {
 	struct bnx2x *bp = params->bp;
-	u16 val16;
+	u16 val16, lane;
 	bnx2x_sfp_e3_set_transmitter(params, phy, 0);
 	bnx2x_set_mdio_clk(bp, params->chip_id, params->port);
 	bnx2x_set_aer_mmd(params, phy);
@@ -4359,6 +4369,30 @@ static void bnx2x_warpcore_link_reset(struct bnx2x_phy *phy,
 			 MDIO_WC_REG_XGXSBLK1_LANECTRL2,
 			 val16 & 0xff00);
 
+	lane = bnx2x_get_warpcore_lane(phy, params);
+	/* Disable CL36 PCS Tx */
+	bnx2x_cl45_read(bp, phy, MDIO_WC_DEVAD,
+			MDIO_WC_REG_XGXSBLK1_LANECTRL0, &val16);
+	val16 |= (0x11 << lane);
+	if (phy->flags & FLAGS_WC_DUAL_MODE)
+		val16 |= (0x22 << lane);
+	bnx2x_cl45_write(bp, phy, MDIO_WC_DEVAD,
+			 MDIO_WC_REG_XGXSBLK1_LANECTRL0, val16);
+
+	bnx2x_cl45_read(bp, phy, MDIO_WC_DEVAD,
+			MDIO_WC_REG_XGXSBLK1_LANECTRL1, &val16);
+	val16 &= ~(0x0303 << (lane << 1));
+	val16 |= (0x0101 << (lane << 1));
+	if (phy->flags & FLAGS_WC_DUAL_MODE) {
+		val16 &= ~(0x0c0c << (lane << 1));
+		val16 |= (0x0404 << (lane << 1));
+	}
+
+	bnx2x_cl45_write(bp, phy, MDIO_WC_DEVAD,
+			 MDIO_WC_REG_XGXSBLK1_LANECTRL1, val16);
+	/* Restore AER */
+	bnx2x_set_aer_mmd(params, phy);
+
 }
 
 static void bnx2x_set_warpcore_loopback(struct bnx2x_phy *phy,
-- 
cgit v1.2.3-70-g09d2


From 4978140c38958b15b3b95a49bda688723fa014eb Mon Sep 17 00:00:00 2001
From: Yaniv Rosner <yanivr@broadcom.com>
Date: Wed, 31 Oct 2012 05:46:55 +0000
Subject: bnx2x: Fix potential incorrect link speed provision

Fix possible incorrect link speed provision following rapid link speed change.
Clear link speed mask after each link change, and not only after link down.

Signed-off-by: Yaniv Rosner <yanivr@broadcom.com>
Signed-off-by: Barak Witkowski <barak@broadcom.com>
Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c | 22 ++++++++++++----------
 1 file changed, 12 insertions(+), 10 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c
index 5e8f7b7a8f6..308ba42dfd5 100644
--- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c
@@ -137,7 +137,16 @@
 #define LINK_20GTFD		LINK_STATUS_SPEED_AND_DUPLEX_20GTFD
 #define LINK_20GXFD		LINK_STATUS_SPEED_AND_DUPLEX_20GXFD
 
-
+#define LINK_UPDATE_MASK \
+			(LINK_STATUS_SPEED_AND_DUPLEX_MASK | \
+			 LINK_STATUS_LINK_UP | \
+			 LINK_STATUS_PHYSICAL_LINK_FLAG | \
+			 LINK_STATUS_AUTO_NEGOTIATE_COMPLETE | \
+			 LINK_STATUS_RX_FLOW_CONTROL_FLAG_MASK | \
+			 LINK_STATUS_TX_FLOW_CONTROL_FLAG_MASK | \
+			 LINK_STATUS_PARALLEL_DETECTION_FLAG_MASK | \
+			 LINK_STATUS_LINK_PARTNER_SYMMETRIC_PAUSE | \
+			 LINK_STATUS_LINK_PARTNER_ASYMMETRIC_PAUSE)
 
 #define SFP_EEPROM_CON_TYPE_ADDR		0x2
 	#define SFP_EEPROM_CON_TYPE_VAL_LC	0x7
@@ -6349,15 +6358,7 @@ static int bnx2x_update_link_down(struct link_params *params,
 	vars->mac_type = MAC_TYPE_NONE;
 
 	/* Update shared memory */
-	vars->link_status &= ~(LINK_STATUS_SPEED_AND_DUPLEX_MASK |
-			       LINK_STATUS_LINK_UP |
-			       LINK_STATUS_PHYSICAL_LINK_FLAG |
-			       LINK_STATUS_AUTO_NEGOTIATE_COMPLETE |
-			       LINK_STATUS_RX_FLOW_CONTROL_FLAG_MASK |
-			       LINK_STATUS_TX_FLOW_CONTROL_FLAG_MASK |
-			       LINK_STATUS_PARALLEL_DETECTION_FLAG_MASK |
-			       LINK_STATUS_LINK_PARTNER_SYMMETRIC_PAUSE |
-			       LINK_STATUS_LINK_PARTNER_ASYMMETRIC_PAUSE);
+	vars->link_status &= ~LINK_UPDATE_MASK;
 	vars->line_speed = 0;
 	bnx2x_update_mng(params, vars->link_status);
 
@@ -6505,6 +6506,7 @@ int bnx2x_link_update(struct link_params *params, struct link_vars *vars)
 	u16 ext_phy_line_speed = 0, prev_line_speed = vars->line_speed;
 	u8 active_external_phy = INT_PHY;
 	vars->phy_flags &= ~PHY_HALF_OPEN_CONN_FLAG;
+	vars->link_status &= ~LINK_UPDATE_MASK;
 	for (phy_index = INT_PHY; phy_index < params->num_phys;
 	      phy_index++) {
 		phy_vars[phy_index].flow_ctrl = 0;
-- 
cgit v1.2.3-70-g09d2


From e82041df5d0a85457880fbbe00da057443b3fcc0 Mon Sep 17 00:00:00 2001
From: Yaniv Rosner <yanivr@broadcom.com>
Date: Wed, 31 Oct 2012 05:46:56 +0000
Subject: bnx2x: Fix unrecognized SFP+ module after driver is loaded

When SFP+ module is plugged in after driver is already loaded, it may not be
recognized, so set SFP module recognition time up to 300ms, without resetting
the module power in the middle.

Signed-off-by: Yaniv Rosner <yanivr@broadcom.com>
Signed-off-by: Barak Witkowski <barak@broadcom.com>
Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c | 22 +++++++++++++++-------
 1 file changed, 15 insertions(+), 7 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c
index 308ba42dfd5..679d45e0980 100644
--- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c
@@ -7634,7 +7634,7 @@ static void bnx2x_warpcore_power_module(struct link_params *params,
 static int bnx2x_warpcore_read_sfp_module_eeprom(struct bnx2x_phy *phy,
 						 struct link_params *params,
 						 u16 addr, u8 byte_cnt,
-						 u8 *o_buf)
+						 u8 *o_buf, u8 is_init)
 {
 	int rc = 0;
 	u8 i, j = 0, cnt = 0;
@@ -7651,10 +7651,10 @@ static int bnx2x_warpcore_read_sfp_module_eeprom(struct bnx2x_phy *phy,
 	/* 4 byte aligned address */
 	addr32 = addr & (~0x3);
 	do {
-		if (cnt == I2C_WA_PWR_ITER) {
+		if ((!is_init) && (cnt == I2C_WA_PWR_ITER)) {
 			bnx2x_warpcore_power_module(params, phy, 0);
 			/* Note that 100us are not enough here */
-			usleep_range(1000,1000);
+			usleep_range(1000, 2000);
 			bnx2x_warpcore_power_module(params, phy, 1);
 		}
 		rc = bnx2x_bsc_read(params, phy, 0xa0, addr32, 0, byte_cnt,
@@ -7774,7 +7774,7 @@ int bnx2x_read_sfp_module_eeprom(struct bnx2x_phy *phy,
 	break;
 	case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_DIRECT:
 		rc = bnx2x_warpcore_read_sfp_module_eeprom(phy, params, addr,
-							   byte_cnt, o_buf);
+							   byte_cnt, o_buf, 0);
 	break;
 	}
 	return rc;
@@ -7978,6 +7978,7 @@ static int bnx2x_wait_for_sfp_module_initialized(struct bnx2x_phy *phy,
 
 {
 	u8 val;
+	int rc;
 	struct bnx2x *bp = params->bp;
 	u16 timeout;
 	/* Initialization time after hot-plug may take up to 300ms for
@@ -7985,8 +7986,14 @@ static int bnx2x_wait_for_sfp_module_initialized(struct bnx2x_phy *phy,
 	 */
 
 	for (timeout = 0; timeout < 60; timeout++) {
-		if (bnx2x_read_sfp_module_eeprom(phy, params, 1, 1, &val)
-		    == 0) {
+		if (phy->type == PORT_HW_CFG_XGXS_EXT_PHY_TYPE_DIRECT)
+			rc = bnx2x_warpcore_read_sfp_module_eeprom(phy,
+								   params, 1,
+								   1, &val, 1);
+		else
+			rc = bnx2x_read_sfp_module_eeprom(phy, params, 1, 1,
+							  &val);
+		if (rc == 0) {
 			DP(NETIF_MSG_LINK,
 			   "SFP+ module initialization took %d ms\n",
 			   timeout * 5);
@@ -7994,7 +8001,8 @@ static int bnx2x_wait_for_sfp_module_initialized(struct bnx2x_phy *phy,
 		}
 		usleep_range(5000, 10000);
 	}
-	return -EINVAL;
+	rc = bnx2x_read_sfp_module_eeprom(phy, params, 1, 1, &val);
+	return rc;
 }
 
 static void bnx2x_8727_power_module(struct bnx2x *bp,
-- 
cgit v1.2.3-70-g09d2


From 03c31488a084b344cd04bb853db97706143327b9 Mon Sep 17 00:00:00 2001
From: Yaniv Rosner <yanivr@broadcom.com>
Date: Wed, 31 Oct 2012 05:46:57 +0000
Subject: bnx2x: Fix no link on 577xx 10G-baseT

Since the Warpcore supports various link types, need to set only the correct
supported modes for XFI which is the serdes interface for the 10G-baseT PHY.

Signed-off-by: Yaniv Rosner <yanivr@broadcom.com>
Signed-off-by: Barak Witkowski <barak@broadcom.com>
Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c | 5 +++++
 1 file changed, 5 insertions(+)

(limited to 'drivers/net')

diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c
index 679d45e0980..6dd0dd076cc 100644
--- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c
@@ -11528,6 +11528,11 @@ static int bnx2x_populate_int_phy(struct bnx2x *bp, u32 shmem_base, u8 port,
 			phy->media_type = ETH_PHY_BASE_T;
 			break;
 		case PORT_HW_CFG_NET_SERDES_IF_XFI:
+			phy->supported &= (SUPPORTED_1000baseT_Full |
+					   SUPPORTED_10000baseT_Full |
+					   SUPPORTED_FIBRE |
+					   SUPPORTED_Pause |
+					   SUPPORTED_Asym_Pause);
 			phy->media_type = ETH_PHY_XFP_FIBER;
 			break;
 		case PORT_HW_CFG_NET_SERDES_IF_SFI:
-- 
cgit v1.2.3-70-g09d2


From 477864ddd36510e9802c2adb6d9445c2d7783fe5 Mon Sep 17 00:00:00 2001
From: Dmitry Kravkov <dmitry@broadcom.com>
Date: Wed, 31 Oct 2012 05:46:58 +0000
Subject: bnx2x: Disable FCoE for 57840 since not yet supported by FW

Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c | 10 +++++++++-
 1 file changed, 9 insertions(+), 1 deletion(-)

(limited to 'drivers/net')

diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c
index d5648fc666b..f23e8c02295 100644
--- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c
@@ -11902,7 +11902,15 @@ static int __devinit bnx2x_init_one(struct pci_dev *pdev,
 	/* disable FCOE L2 queue for E1x */
 	if (CHIP_IS_E1x(bp))
 		bp->flags |= NO_FCOE_FLAG;
-
+	/* disable FCOE for 57840 device, until FW supports it */
+	switch (ent->driver_data) {
+	case BCM57840_O:
+	case BCM57840_4_10:
+	case BCM57840_2_20:
+	case BCM57840_MFO:
+	case BCM57840_MF:
+		bp->flags |= NO_FCOE_FLAG;
+	}
 #endif
 
 
-- 
cgit v1.2.3-70-g09d2


From eb6e98a1b25fb0f347fece9814257a9e1cb537c8 Mon Sep 17 00:00:00 2001
From: "nikolay@redhat.com" <nikolay@redhat.com>
Date: Wed, 31 Oct 2012 04:42:51 +0000
Subject: bonding: fix off-by-one error

Fix off-by-one error because IFNAMSIZ == 16 and when this
code gets executed we stick a NULL byte where we should not.

How to reproduce:
 with CONFIG_CC_STACKPROTECTOR=y (otherwise it may pass by silently)
 modprobe bonding; echo 1 > /sys/class/net/bond0/bonding/mode;
 echo "AAAAAAAAAAAAAAAA" > /sys/class/net/bond0/bonding/primary;

Signed-off-by: Nikolay Aleksandrov <nikolay@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/bonding/bond_sysfs.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'drivers/net')

diff --git a/drivers/net/bonding/bond_sysfs.c b/drivers/net/bonding/bond_sysfs.c
index dc15d248443..238d9b3e225 100644
--- a/drivers/net/bonding/bond_sysfs.c
+++ b/drivers/net/bonding/bond_sysfs.c
@@ -1060,7 +1060,7 @@ static ssize_t bonding_store_primary(struct device *d,
 		goto out;
 	}
 
-	sscanf(buf, "%16s", ifname); /* IFNAMSIZ */
+	sscanf(buf, "%15s", ifname); /* IFNAMSIZ */
 
 	/* check to see if we are clearing primary */
 	if (!strlen(ifname) || buf[0] == '\n') {
-- 
cgit v1.2.3-70-g09d2


From c84e1590d149cfc885062e938944941f33e69f38 Mon Sep 17 00:00:00 2001
From: "nikolay@redhat.com" <nikolay@redhat.com>
Date: Wed, 31 Oct 2012 06:03:52 +0000
Subject: bonding: fix second off-by-one error

Fix off-by-one error because IFNAMSIZ == 16 and when this
code gets executed we stick a NULL byte where we should not.

How to reproduce:
 with CONFIG_CC_STACKPROTECTOR=y (otherwise it may pass by silently)
 modprobe bonding; echo 1 > /sys/class/net/bond0/bonding/mode;
 echo "AAAAAAAAAAAAAAAA" > /sys/class/net/bond0/bonding/active_slave;

Signed-off-by: Nikolay Aleksandrov <nikolay@redhat.com>

Note: Sorry for the second patch but I missed this one while checking
      the file. You can squash them into one patch.
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/bonding/bond_sysfs.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'drivers/net')

diff --git a/drivers/net/bonding/bond_sysfs.c b/drivers/net/bonding/bond_sysfs.c
index 238d9b3e225..ef8d2a080d1 100644
--- a/drivers/net/bonding/bond_sysfs.c
+++ b/drivers/net/bonding/bond_sysfs.c
@@ -1237,7 +1237,7 @@ static ssize_t bonding_store_active_slave(struct device *d,
 		goto out;
 	}
 
-	sscanf(buf, "%16s", ifname); /* IFNAMSIZ */
+	sscanf(buf, "%15s", ifname); /* IFNAMSIZ */
 
 	/* check to see if we are clearing active */
 	if (!strlen(ifname) || buf[0] == '\n') {
-- 
cgit v1.2.3-70-g09d2


From 2b674047bef23d49a7ca8ec32f4b9e4e12588621 Mon Sep 17 00:00:00 2001
From: Dmitry Kravkov <dmitry@broadcom.com>
Date: Sun, 28 Oct 2012 21:59:04 +0000
Subject: bnx2x: fix HW initialization using fw 7.8.x

Since commit 96bed4b9 (use FW 7.8.2) BRB HW block needs to be
initialized using fw values for all devices.
Otherwise ETS on 57712/578xx will not work.

Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com>
Signed-off-by: Ariel Elior <ariele@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

(limited to 'drivers/net')

diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c
index f23e8c02295..bd1fd3d87c2 100644
--- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c
@@ -6794,8 +6794,9 @@ static int bnx2x_init_hw_port(struct bnx2x *bp)
 
 	bnx2x_init_block(bp, BLOCK_DORQ, init_phase);
 
+	bnx2x_init_block(bp, BLOCK_BRB1, init_phase);
+
 	if (CHIP_IS_E1(bp) || CHIP_IS_E1H(bp)) {
-		bnx2x_init_block(bp, BLOCK_BRB1, init_phase);
 
 		if (IS_MF(bp))
 			low = ((bp->flags & ONE_PORT_FLAG) ? 160 : 246);
-- 
cgit v1.2.3-70-g09d2


From 57c10b61c84bfed68b1b317d6f507a392724b9c4 Mon Sep 17 00:00:00 2001
From: Peter Senna Tschudin <peter.senna@gmail.com>
Date: Sun, 28 Oct 2012 06:12:00 +0000
Subject: drivers/net/ethernet/nxp/lpc_eth.c: Call mdiobus_unregister before
 mdiobus_free

Based on commit b27393aecf66199f5ddad37c302d3e0cfadbe6c0

Calling mdiobus_free without calling mdiobus_unregister causes
BUG_ON(). This patch fixes the issue.

The semantic patch that found this issue(http://coccinelle.lip6.fr/):
// <smpl>
@@
expression E;
@@
  ... when != mdiobus_unregister(E);

+ mdiobus_unregister(E);
  mdiobus_free(E);
// </smpl>

Signed-off-by: Peter Senna Tschudin <peter.senna@gmail.com>
Tested-by: Roland Stigge <stigge@antcom.de>
Tested-by: Alexandre Pereira da Silva <aletes.xgr@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/ethernet/nxp/lpc_eth.c | 1 +
 1 file changed, 1 insertion(+)

(limited to 'drivers/net')

diff --git a/drivers/net/ethernet/nxp/lpc_eth.c b/drivers/net/ethernet/nxp/lpc_eth.c
index 53743f7a2ca..af8b4142088 100644
--- a/drivers/net/ethernet/nxp/lpc_eth.c
+++ b/drivers/net/ethernet/nxp/lpc_eth.c
@@ -1524,6 +1524,7 @@ static int lpc_eth_drv_remove(struct platform_device *pdev)
 				  pldat->dma_buff_base_p);
 	free_irq(ndev->irq, ndev);
 	iounmap(pldat->net_base);
+	mdiobus_unregister(pldat->mii_bus);
 	mdiobus_free(pldat->mii_bus);
 	clk_disable(pldat->clk);
 	clk_put(pldat->clk);
-- 
cgit v1.2.3-70-g09d2


From aa731872f7d33dcb8b54dad0cfb82d4e4d195d7e Mon Sep 17 00:00:00 2001
From: Peter Senna Tschudin <peter.senna@gmail.com>
Date: Sun, 28 Oct 2012 06:12:01 +0000
Subject: drivers/net/phy/mdio-bitbang.c: Call mdiobus_unregister before
 mdiobus_free

Based on commit b27393aecf66199f5ddad37c302d3e0cfadbe6c0

Calling mdiobus_free without calling mdiobus_unregister causes
BUG_ON(). This patch fixes the issue.

The semantic patch that found this issue(http://coccinelle.lip6.fr/):
// <smpl>
@@
expression E;
@@
  ... when != mdiobus_unregister(E);

+ mdiobus_unregister(E);
  mdiobus_free(E);
// </smpl>

Signed-off-by: Peter Senna Tschudin <peter.senna@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/phy/mdio-bitbang.c | 1 +
 1 file changed, 1 insertion(+)

(limited to 'drivers/net')

diff --git a/drivers/net/phy/mdio-bitbang.c b/drivers/net/phy/mdio-bitbang.c
index daec9b05d16..6428fcbbdd4 100644
--- a/drivers/net/phy/mdio-bitbang.c
+++ b/drivers/net/phy/mdio-bitbang.c
@@ -234,6 +234,7 @@ void free_mdio_bitbang(struct mii_bus *bus)
 	struct mdiobb_ctrl *ctrl = bus->priv;
 
 	module_put(ctrl->ops->owner);
+	mdiobus_unregister(bus);
 	mdiobus_free(bus);
 }
 EXPORT_SYMBOL(free_mdio_bitbang);
-- 
cgit v1.2.3-70-g09d2


From e3c98512780ae2cfb90be2152ab35294439bb7bb Mon Sep 17 00:00:00 2001
From: Vipul Pandya <vipul@chelsio.com>
Date: Mon, 29 Oct 2012 02:02:36 +0000
Subject: cxgb4: Fix unable to get UP event from the LLD

If T4 configuration file gets loaded from the /lib/firmware/cxgb4/ directory
then offload capabilities of the cards were getting disabled during
initialization. Hence ULDs do not get an UP event from the LLD.

Signed-off-by: Jay Hernandez <jay@chelsio.com>
Signed-off-by: Vipul Pandya <vipul@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c | 10 ----------
 1 file changed, 10 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c b/drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c
index c1cde11b0c6..0df1284df49 100644
--- a/drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c
+++ b/drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c
@@ -3415,16 +3415,6 @@ static int adap_init0_config(struct adapter *adapter, int reset)
 			 "mismatch: [fini] csum=%#x, computed csum=%#x\n",
 			 finicsum, cfcsum);
 
-	/*
-	 * If we're a pure NIC driver then disable all offloading facilities.
-	 * This will allow the firmware to optimize aspects of the hardware
-	 * configuration which will result in improved performance.
-	 */
-	caps_cmd.ofldcaps = 0;
-	caps_cmd.iscsicaps = 0;
-	caps_cmd.rdmacaps = 0;
-	caps_cmd.fcoecaps = 0;
-
 	/*
 	 * And now tell the firmware to use the configuration we just loaded.
 	 */
-- 
cgit v1.2.3-70-g09d2


From a4d7e485bca65bd516fced77b03f92419308df72 Mon Sep 17 00:00:00 2001
From: Eric Dumazet <edumazet@google.com>
Date: Mon, 29 Oct 2012 07:30:49 +0000
Subject: vmxnet3: must split too big fragments

vmxnet3 has a 16Kbytes limit per tx descriptor, that happened to work
as long as we provided PAGE_SIZE fragments.

Our stack can now build larger fragments, so we need to split them to
the 16kbytes boundary.

Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: jongman heo <jongman.heo@samsung.com>
Tested-by: jongman heo <jongman.heo@samsung.com>
Cc: Shreyas Bhatewara <sbhatewara@vmware.com>
Reviewed-by: Bhavesh Davda <bhavesh@vmware.com>
Signed-off-by: Shreyas Bhatewara <sbhatewara@vmware.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/vmxnet3/vmxnet3_drv.c | 65 +++++++++++++++++++++++++++------------
 1 file changed, 45 insertions(+), 20 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/vmxnet3/vmxnet3_drv.c b/drivers/net/vmxnet3/vmxnet3_drv.c
index ce9d4f2c977..0ae1bcc6da7 100644
--- a/drivers/net/vmxnet3/vmxnet3_drv.c
+++ b/drivers/net/vmxnet3/vmxnet3_drv.c
@@ -744,28 +744,43 @@ vmxnet3_map_pkt(struct sk_buff *skb, struct vmxnet3_tx_ctx *ctx,
 
 	for (i = 0; i < skb_shinfo(skb)->nr_frags; i++) {
 		const struct skb_frag_struct *frag = &skb_shinfo(skb)->frags[i];
+		u32 buf_size;
 
-		tbi = tq->buf_info + tq->tx_ring.next2fill;
-		tbi->map_type = VMXNET3_MAP_PAGE;
-		tbi->dma_addr = skb_frag_dma_map(&adapter->pdev->dev, frag,
-						 0, skb_frag_size(frag),
-						 DMA_TO_DEVICE);
+		buf_offset = 0;
+		len = skb_frag_size(frag);
+		while (len) {
+			tbi = tq->buf_info + tq->tx_ring.next2fill;
+			if (len < VMXNET3_MAX_TX_BUF_SIZE) {
+				buf_size = len;
+				dw2 |= len;
+			} else {
+				buf_size = VMXNET3_MAX_TX_BUF_SIZE;
+				/* spec says that for TxDesc.len, 0 == 2^14 */
+			}
+			tbi->map_type = VMXNET3_MAP_PAGE;
+			tbi->dma_addr = skb_frag_dma_map(&adapter->pdev->dev, frag,
+							 buf_offset, buf_size,
+							 DMA_TO_DEVICE);
 
-		tbi->len = skb_frag_size(frag);
+			tbi->len = buf_size;
 
-		gdesc = tq->tx_ring.base + tq->tx_ring.next2fill;
-		BUG_ON(gdesc->txd.gen == tq->tx_ring.gen);
+			gdesc = tq->tx_ring.base + tq->tx_ring.next2fill;
+			BUG_ON(gdesc->txd.gen == tq->tx_ring.gen);
 
-		gdesc->txd.addr = cpu_to_le64(tbi->dma_addr);
-		gdesc->dword[2] = cpu_to_le32(dw2 | skb_frag_size(frag));
-		gdesc->dword[3] = 0;
+			gdesc->txd.addr = cpu_to_le64(tbi->dma_addr);
+			gdesc->dword[2] = cpu_to_le32(dw2);
+			gdesc->dword[3] = 0;
 
-		dev_dbg(&adapter->netdev->dev,
-			"txd[%u]: 0x%llu %u %u\n",
-			tq->tx_ring.next2fill, le64_to_cpu(gdesc->txd.addr),
-			le32_to_cpu(gdesc->dword[2]), gdesc->dword[3]);
-		vmxnet3_cmd_ring_adv_next2fill(&tq->tx_ring);
-		dw2 = tq->tx_ring.gen << VMXNET3_TXD_GEN_SHIFT;
+			dev_dbg(&adapter->netdev->dev,
+				"txd[%u]: 0x%llu %u %u\n",
+				tq->tx_ring.next2fill, le64_to_cpu(gdesc->txd.addr),
+				le32_to_cpu(gdesc->dword[2]), gdesc->dword[3]);
+			vmxnet3_cmd_ring_adv_next2fill(&tq->tx_ring);
+			dw2 = tq->tx_ring.gen << VMXNET3_TXD_GEN_SHIFT;
+
+			len -= buf_size;
+			buf_offset += buf_size;
+		}
 	}
 
 	ctx->eop_txd = gdesc;
@@ -886,6 +901,18 @@ vmxnet3_prepare_tso(struct sk_buff *skb,
 	}
 }
 
+static int txd_estimate(const struct sk_buff *skb)
+{
+	int count = VMXNET3_TXD_NEEDED(skb_headlen(skb)) + 1;
+	int i;
+
+	for (i = 0; i < skb_shinfo(skb)->nr_frags; i++) {
+		const struct skb_frag_struct *frag = &skb_shinfo(skb)->frags[i];
+
+		count += VMXNET3_TXD_NEEDED(skb_frag_size(frag));
+	}
+	return count;
+}
 
 /*
  * Transmits a pkt thru a given tq
@@ -914,9 +941,7 @@ vmxnet3_tq_xmit(struct sk_buff *skb, struct vmxnet3_tx_queue *tq,
 	union Vmxnet3_GenericDesc tempTxDesc;
 #endif
 
-	/* conservatively estimate # of descriptors to use */
-	count = VMXNET3_TXD_NEEDED(skb_headlen(skb)) +
-		skb_shinfo(skb)->nr_frags + 1;
+	count = txd_estimate(skb);
 
 	ctx.ipv4 = (vlan_get_protocol(skb) == cpu_to_be16(ETH_P_IP));
 
-- 
cgit v1.2.3-70-g09d2


From 175c0dffef310fc7d7f026ca4a7682beb2fbd8ec Mon Sep 17 00:00:00 2001
From: Xiaotian Feng <xtfeng@gmail.com>
Date: Wed, 31 Oct 2012 00:29:57 +0000
Subject: drivers/net: use tasklet_kill in device remove/close process

Some driver uses tasklet_disable in device remove/close process,
tasklet_disable will inc tasklet->count and return. If the tasklet
is not handled yet because some softirq pressure, the tasklet will
placed on the tasklet_vec, never have a chance to excute. This might
lead to ksoftirqd heavy loaded, wakeup with pending_softirq, but
tasklet is disabled. tasklet_kill should be used in this case.

Signed-off-by: Xiaotian Feng <dannyfeng@tencent.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: netdev@vger.kernel.org
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/ethernet/jme.c                        | 8 ++++----
 drivers/net/ethernet/marvell/skge.c               | 2 +-
 drivers/net/ethernet/micrel/ksz884x.c             | 4 ++--
 drivers/net/ethernet/xilinx/xilinx_axienet_main.c | 2 +-
 drivers/net/wireless/b43legacy/pio.c              | 2 +-
 5 files changed, 9 insertions(+), 9 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/ethernet/jme.c b/drivers/net/ethernet/jme.c
index f8064df10cc..92317e9c0f7 100644
--- a/drivers/net/ethernet/jme.c
+++ b/drivers/net/ethernet/jme.c
@@ -1948,10 +1948,10 @@ jme_close(struct net_device *netdev)
 
 	JME_NAPI_DISABLE(jme);
 
-	tasklet_disable(&jme->linkch_task);
-	tasklet_disable(&jme->txclean_task);
-	tasklet_disable(&jme->rxclean_task);
-	tasklet_disable(&jme->rxempty_task);
+	tasklet_kill(&jme->linkch_task);
+	tasklet_kill(&jme->txclean_task);
+	tasklet_kill(&jme->rxclean_task);
+	tasklet_kill(&jme->rxempty_task);
 
 	jme_disable_rx_engine(jme);
 	jme_disable_tx_engine(jme);
diff --git a/drivers/net/ethernet/marvell/skge.c b/drivers/net/ethernet/marvell/skge.c
index 9b9c2ac5c4c..d19a143aa5a 100644
--- a/drivers/net/ethernet/marvell/skge.c
+++ b/drivers/net/ethernet/marvell/skge.c
@@ -4026,7 +4026,7 @@ static void __devexit skge_remove(struct pci_dev *pdev)
 	dev0 = hw->dev[0];
 	unregister_netdev(dev0);
 
-	tasklet_disable(&hw->phy_task);
+	tasklet_kill(&hw->phy_task);
 
 	spin_lock_irq(&hw->hw_lock);
 	hw->intr_mask = 0;
diff --git a/drivers/net/ethernet/micrel/ksz884x.c b/drivers/net/ethernet/micrel/ksz884x.c
index 318fee91c79..e558edd1cb6 100644
--- a/drivers/net/ethernet/micrel/ksz884x.c
+++ b/drivers/net/ethernet/micrel/ksz884x.c
@@ -5407,8 +5407,8 @@ static int netdev_close(struct net_device *dev)
 		/* Delay for receive task to stop scheduling itself. */
 		msleep(2000 / HZ);
 
-		tasklet_disable(&hw_priv->rx_tasklet);
-		tasklet_disable(&hw_priv->tx_tasklet);
+		tasklet_kill(&hw_priv->rx_tasklet);
+		tasklet_kill(&hw_priv->tx_tasklet);
 		free_irq(dev->irq, hw_priv->dev);
 
 		transmit_cleanup(hw_priv, 0);
diff --git a/drivers/net/ethernet/xilinx/xilinx_axienet_main.c b/drivers/net/ethernet/xilinx/xilinx_axienet_main.c
index 0793299bd39..1d04754a663 100644
--- a/drivers/net/ethernet/xilinx/xilinx_axienet_main.c
+++ b/drivers/net/ethernet/xilinx/xilinx_axienet_main.c
@@ -990,7 +990,7 @@ static int axienet_stop(struct net_device *ndev)
 	axienet_setoptions(ndev, lp->options &
 			   ~(XAE_OPTION_TXEN | XAE_OPTION_RXEN));
 
-	tasklet_disable(&lp->dma_err_tasklet);
+	tasklet_kill(&lp->dma_err_tasklet);
 
 	free_irq(lp->tx_irq, ndev);
 	free_irq(lp->rx_irq, ndev);
diff --git a/drivers/net/wireless/b43legacy/pio.c b/drivers/net/wireless/b43legacy/pio.c
index 192251adf98..282eedec675 100644
--- a/drivers/net/wireless/b43legacy/pio.c
+++ b/drivers/net/wireless/b43legacy/pio.c
@@ -382,7 +382,7 @@ static void cancel_transfers(struct b43legacy_pioqueue *queue)
 {
 	struct b43legacy_pio_txpacket *packet, *tmp_packet;
 
-	tasklet_disable(&queue->txtask);
+	tasklet_kill(&queue->txtask);
 
 	list_for_each_entry_safe(packet, tmp_packet, &queue->txrunning, list)
 		free_txpacket(packet, 0);
-- 
cgit v1.2.3-70-g09d2


From b00e69dee4ccbb3a19989e3d4f1385bc2e3406cd Mon Sep 17 00:00:00 2001
From: Cyril Brulebois <kibi@debian.org>
Date: Wed, 31 Oct 2012 14:00:46 +0000
Subject: r8169: Fix WoL on RTL8168d/8111d.

This regression was spotted between Debian squeeze and Debian wheezy
kernels (respectively based on 2.6.32 and 3.2). More info about
Wake-on-LAN issues with Realtek's 816x chipsets can be found in the
following thread: http://marc.info/?t=132079219400004

Probable regression from d4ed95d796e5126bba51466dc07e287cebc8bd19;
more chipsets are likely affected.

Tested on top of a 3.2.23 kernel.

Reported-by: Florent Fourcot <florent.fourcot@enst-bretagne.fr>
Tested-by: Florent Fourcot <florent.fourcot@enst-bretagne.fr>
Hinted-by: Francois Romieu <romieu@fr.zoreil.com>
Signed-off-by: Cyril Brulebois <kibi@debian.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/ethernet/realtek/r8169.c | 2 ++
 1 file changed, 2 insertions(+)

(limited to 'drivers/net')

diff --git a/drivers/net/ethernet/realtek/r8169.c b/drivers/net/ethernet/realtek/r8169.c
index e7ff886e804..eb6a5e4ca4c 100644
--- a/drivers/net/ethernet/realtek/r8169.c
+++ b/drivers/net/ethernet/realtek/r8169.c
@@ -3827,6 +3827,8 @@ static void rtl_wol_suspend_quirk(struct rtl8169_private *tp)
 	void __iomem *ioaddr = tp->mmio_addr;
 
 	switch (tp->mac_version) {
+	case RTL_GIGA_MAC_VER_25:
+	case RTL_GIGA_MAC_VER_26:
 	case RTL_GIGA_MAC_VER_29:
 	case RTL_GIGA_MAC_VER_30:
 	case RTL_GIGA_MAC_VER_32:
-- 
cgit v1.2.3-70-g09d2


From 0481776b7a70f09acf7d9d97c288c3a8403fbfe4 Mon Sep 17 00:00:00 2001
From: Nathan Walp <faceprint@faceprint.com>
Date: Thu, 1 Nov 2012 12:08:47 +0000
Subject: r8169: allow multicast packets on sub-8168f chipset.

RTL_GIGA_MAC_VER_35 includes no multicast hardware filter.

Signed-off-by: Nathan Walp <faceprint@faceprint.com>
Suggested-by: Hayes Wang <hayeswang@realtek.com>
Acked-by: Francois Romieu <romieu@fr.zoreil.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/ethernet/realtek/r8169.c | 3 +++
 1 file changed, 3 insertions(+)

(limited to 'drivers/net')

diff --git a/drivers/net/ethernet/realtek/r8169.c b/drivers/net/ethernet/realtek/r8169.c
index eb6a5e4ca4c..927aa33d434 100644
--- a/drivers/net/ethernet/realtek/r8169.c
+++ b/drivers/net/ethernet/realtek/r8169.c
@@ -4521,6 +4521,9 @@ static void rtl_set_rx_mode(struct net_device *dev)
 		mc_filter[1] = swab32(data);
 	}
 
+	if (tp->mac_version == RTL_GIGA_MAC_VER_35)
+		mc_filter[1] = mc_filter[0] = 0xffffffff;
+
 	RTL_W32(MAR0 + 4, mc_filter[1]);
 	RTL_W32(MAR0 + 0, mc_filter[0]);
 
-- 
cgit v1.2.3-70-g09d2


From 00acda68b587181546d68fb98db1c5c73ee6c16f Mon Sep 17 00:00:00 2001
From: Steve Glendinning <steve.glendinning@shawell.net>
Date: Fri, 2 Nov 2012 00:44:20 +0000
Subject: smsc95xx: fix tx checksum offload for big endian

f7b2927 introduced tx checksum offload support for smsc95xx,
and enabled it by default. This feature doesn't take
endianness into account, so causes most tx to fail on
those platforms.

This patch fixes the problem fully by adding the missing
conversion.

An alternate workaround is to disable TX checksum offload
on those platforms. The cpu impact of this feature is very low.

Signed-off-by: Steve Glendinning <steve.glendinning@shawell.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/usb/smsc95xx.c | 1 +
 1 file changed, 1 insertion(+)

(limited to 'drivers/net')

diff --git a/drivers/net/usb/smsc95xx.c b/drivers/net/usb/smsc95xx.c
index 7479a5761d0..3286166415b 100644
--- a/drivers/net/usb/smsc95xx.c
+++ b/drivers/net/usb/smsc95xx.c
@@ -1344,6 +1344,7 @@ static struct sk_buff *smsc95xx_tx_fixup(struct usbnet *dev,
 		} else {
 			u32 csum_preamble = smsc95xx_calc_csum_preamble(skb);
 			skb_push(skb, 4);
+			cpu_to_le32s(&csum_preamble);
 			memcpy(skb->data, &csum_preamble, 4);
 		}
 	}
-- 
cgit v1.2.3-70-g09d2


From efc7ce0334b68387b48baf16a285a9b1d5c19256 Mon Sep 17 00:00:00 2001
From: Masanari Iida <standby24x7@gmail.com>
Date: Fri, 2 Nov 2012 04:36:17 +0000
Subject: net: bnx2x: Fix typo in bnx2x driver

Correct spelling typo in bnx2x driver

Signed-off-by: Masanari Iida <standby24x7@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/ethernet/broadcom/bnx2x/bnx2x_ethtool.c | 2 +-
 drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c    | 4 ++--
 2 files changed, 3 insertions(+), 3 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_ethtool.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_ethtool.c
index c65295dded3..6e5bdd1a31d 100644
--- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_ethtool.c
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_ethtool.c
@@ -1702,7 +1702,7 @@ static int bnx2x_set_eee(struct net_device *dev, struct ethtool_eee *edata)
 				      SHMEM_EEE_ADV_STATUS_SHIFT);
 	if ((advertised != (eee_cfg & SHMEM_EEE_ADV_STATUS_MASK))) {
 		DP(BNX2X_MSG_ETHTOOL,
-		   "Direct manipulation of EEE advertisment is not supported\n");
+		   "Direct manipulation of EEE advertisement is not supported\n");
 		return -EINVAL;
 	}
 
diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c
index 6dd0dd076cc..f6cfdc6cf20 100644
--- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c
@@ -9941,7 +9941,7 @@ static int bnx2x_848x3_config_init(struct bnx2x_phy *phy,
 		else
 			rc = bnx2x_8483x_disable_eee(phy, params, vars);
 		if (rc) {
-			DP(NETIF_MSG_LINK, "Failed to set EEE advertisment\n");
+			DP(NETIF_MSG_LINK, "Failed to set EEE advertisement\n");
 			return rc;
 		}
 	} else {
@@ -12987,7 +12987,7 @@ static u8 bnx2x_analyze_link_error(struct link_params *params,
 		DP(NETIF_MSG_LINK, "Analyze TX Fault\n");
 		break;
 	default:
-		DP(NETIF_MSG_LINK, "Analyze UNKOWN\n");
+		DP(NETIF_MSG_LINK, "Analyze UNKNOWN\n");
 	}
 	DP(NETIF_MSG_LINK, "Link changed:[%x %x]->%x\n", vars->link_up,
 	   old_status, status);
-- 
cgit v1.2.3-70-g09d2


From 0062b15c107d756dd7c9e41d023e87f876320c97 Mon Sep 17 00:00:00 2001
From: Vipul Pandya <vipul@chelsio.com>
Date: Tue, 6 Nov 2012 03:37:09 +0000
Subject: cxgb4: Initialize data structures before using.

We should not assume reserve fields to be don't cares as fields may change.
Clearing data structures before using.

Signed-off-by: Jay Hernandez <jay@chelsio.com>
Signed-off-by: Vipul Pandya <vipul@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/ethernet/chelsio/cxgb4/t4_hw.c | 4 ++++
 1 file changed, 4 insertions(+)

(limited to 'drivers/net')

diff --git a/drivers/net/ethernet/chelsio/cxgb4/t4_hw.c b/drivers/net/ethernet/chelsio/cxgb4/t4_hw.c
index 32eec15fe4c..01fa5b79162 100644
--- a/drivers/net/ethernet/chelsio/cxgb4/t4_hw.c
+++ b/drivers/net/ethernet/chelsio/cxgb4/t4_hw.c
@@ -2519,6 +2519,7 @@ int t4_fw_bye(struct adapter *adap, unsigned int mbox)
 {
 	struct fw_bye_cmd c;
 
+	memset(&c, 0, sizeof(c));
 	INIT_CMD(c, BYE, WRITE);
 	return t4_wr_mbox(adap, mbox, &c, sizeof(c), NULL);
 }
@@ -2535,6 +2536,7 @@ int t4_early_init(struct adapter *adap, unsigned int mbox)
 {
 	struct fw_initialize_cmd c;
 
+	memset(&c, 0, sizeof(c));
 	INIT_CMD(c, INITIALIZE, WRITE);
 	return t4_wr_mbox(adap, mbox, &c, sizeof(c), NULL);
 }
@@ -2551,6 +2553,7 @@ int t4_fw_reset(struct adapter *adap, unsigned int mbox, int reset)
 {
 	struct fw_reset_cmd c;
 
+	memset(&c, 0, sizeof(c));
 	INIT_CMD(c, RESET, WRITE);
 	c.val = htonl(reset);
 	return t4_wr_mbox(adap, mbox, &c, sizeof(c), NULL);
@@ -3278,6 +3281,7 @@ int t4_identify_port(struct adapter *adap, unsigned int mbox, unsigned int viid,
 {
 	struct fw_vi_enable_cmd c;
 
+	memset(&c, 0, sizeof(c));
 	c.op_to_viid = htonl(FW_CMD_OP(FW_VI_ENABLE_CMD) | FW_CMD_REQUEST |
 			     FW_CMD_EXEC | FW_VI_ENABLE_CMD_VIID(viid));
 	c.ien_to_len16 = htonl(FW_VI_ENABLE_CMD_LED | FW_LEN16(c));
-- 
cgit v1.2.3-70-g09d2


From 0dad9e94bdb1e424c4feeed715dff2fe51528289 Mon Sep 17 00:00:00 2001
From: Vipul Pandya <vipul@chelsio.com>
Date: Wed, 7 Nov 2012 03:45:46 +0000
Subject: cxgb4: Fix initialization of SGE_CONTROL register

INGPADBOUNDARY_MASK is already shifted. No need to shift it again. On reloading
a driver it was resulting in a bad SGE FL MTU sizes [1536, 9088] error. This
only causes an issue on systems that have L1 cache size of 32B, 128B, 512B,
2048B or 4096B.

Signed-off-by: Jay Hernandez <jay@chelsio.com>
Signed-off-by: Vipul Pandya <vipul@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/ethernet/chelsio/cxgb4/t4_hw.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'drivers/net')

diff --git a/drivers/net/ethernet/chelsio/cxgb4/t4_hw.c b/drivers/net/ethernet/chelsio/cxgb4/t4_hw.c
index 01fa5b79162..730ae2cfa49 100644
--- a/drivers/net/ethernet/chelsio/cxgb4/t4_hw.c
+++ b/drivers/net/ethernet/chelsio/cxgb4/t4_hw.c
@@ -2831,7 +2831,7 @@ int t4_fixup_host_params(struct adapter *adap, unsigned int page_size,
 		     HOSTPAGESIZEPF7(sge_hps));
 
 	t4_set_reg_field(adap, SGE_CONTROL,
-			 INGPADBOUNDARY(INGPADBOUNDARY_MASK) |
+			 INGPADBOUNDARY_MASK |
 			 EGRSTATUSPAGESIZE_MASK,
 			 INGPADBOUNDARY(fl_align_log - 5) |
 			 EGRSTATUSPAGESIZE(stat_len != 64));
-- 
cgit v1.2.3-70-g09d2


From a66fe1653f4e81c007a68ca975067432a42df05b Mon Sep 17 00:00:00 2001
From: Ian Coolidge <iancoolidge@gmail.com>
Date: Wed, 7 Nov 2012 14:39:19 +0000
Subject: net: usb: cdc_eem: Fix rx skb allocation for 802.1Q VLANs

cdc_eem frames might need to contain 802.1Q VLAN Ethernet frames.
URB/skb sizing from usbnet will default to the hard_mtu,
so account for the VLAN header by expanding that via hard_header_len

Signed-off-by: Ian Coolidge <iancoolidge@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/usb/cdc_eem.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

(limited to 'drivers/net')

diff --git a/drivers/net/usb/cdc_eem.c b/drivers/net/usb/cdc_eem.c
index c81e278629f..08d55b6bf27 100644
--- a/drivers/net/usb/cdc_eem.c
+++ b/drivers/net/usb/cdc_eem.c
@@ -31,6 +31,7 @@
 #include <linux/usb/cdc.h>
 #include <linux/usb/usbnet.h>
 #include <linux/gfp.h>
+#include <linux/if_vlan.h>
 
 
 /*
@@ -92,7 +93,7 @@ static int eem_bind(struct usbnet *dev, struct usb_interface *intf)
 
 	/* no jumbogram (16K) support for now */
 
-	dev->net->hard_header_len += EEM_HEAD + ETH_FCS_LEN;
+	dev->net->hard_header_len += EEM_HEAD + ETH_FCS_LEN + VLAN_HLEN;
 	dev->hard_mtu = dev->net->mtu + dev->net->hard_header_len;
 
 	return 0;
-- 
cgit v1.2.3-70-g09d2


From 9532021da6da48351ce48a079c673df8e3930b4a Mon Sep 17 00:00:00 2001
From: Steve Glendinning <steve.glendinning@shawell.net>
Date: Thu, 8 Nov 2012 06:26:21 +0000
Subject: usbnet: ratelimit kevent may have been dropped warnings

when something goes wrong, a flood of these messages can be
generated by usbnet (thousands per second).  This doesn't
generally *help* the condition so this patch ratelimits the
rate of their generation.

There's an underlying problem in usbnet's kevent deferral
mechanism which needs fixing, specifically that events *can*
get dropped and not handled.  This patch doesn't address this,
but just mitigates fallout caused by the current implemention.

Signed-off-by: Steve Glendinning <steve.glendinning@shawell.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/usb/usbnet.c | 8 +++++---
 1 file changed, 5 insertions(+), 3 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/usb/usbnet.c b/drivers/net/usb/usbnet.c
index cb04f900cc4..edb81ed0695 100644
--- a/drivers/net/usb/usbnet.c
+++ b/drivers/net/usb/usbnet.c
@@ -359,10 +359,12 @@ static enum skb_state defer_bh(struct usbnet *dev, struct sk_buff *skb,
 void usbnet_defer_kevent (struct usbnet *dev, int work)
 {
 	set_bit (work, &dev->flags);
-	if (!schedule_work (&dev->kevent))
-		netdev_err(dev->net, "kevent %d may have been dropped\n", work);
-	else
+	if (!schedule_work (&dev->kevent)) {
+		if (net_ratelimit())
+			netdev_err(dev->net, "kevent %d may have been dropped\n", work);
+	} else {
 		netdev_dbg(dev->net, "kevent %d scheduled\n", work);
+	}
 }
 EXPORT_SYMBOL_GPL(usbnet_defer_kevent);
 
-- 
cgit v1.2.3-70-g09d2


From 103cdd1d59e1ab6abccb049093239cc8e6295816 Mon Sep 17 00:00:00 2001
From: Wang Dongsheng <dongsheng.wang@freescale.com>
Date: Fri, 9 Nov 2012 04:43:51 +0000
Subject: gianfar: ethernet vanishes after restoring from hibernation

If a gianfar ethernet device is down prior to hibernating a
system, it will no longer be present upon system restore.

For example:

	~# ifconfig eth0 down
	~# echo disk > /sys/power/state

	  <trigger a restore from hibernation>

	~# ifconfig eth0 up
	SIOCSIFFLAGS: No such device

This happens because the restore function bails out early upon
finding devices that were not up at hibernation.  In doing so,
it never gets to the netif_device_attach call at the end of
the restore function.  Adding the netif_device_attach as done
here also makes the gfar_restore code consistent with what is
done in the gfar_resume code.

Cc: Claudiu Manoil <claudiu.manoil@freescale.com>
Signed-off-by: Wang Dongsheng <dongsheng.wang@freescale.com>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Acked-by: Claudiu Manoil <claudiu.manoil@freescale.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/ethernet/freescale/gianfar.c | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

(limited to 'drivers/net')

diff --git a/drivers/net/ethernet/freescale/gianfar.c b/drivers/net/ethernet/freescale/gianfar.c
index 1d03dcdd5e5..19ac096cb07 100644
--- a/drivers/net/ethernet/freescale/gianfar.c
+++ b/drivers/net/ethernet/freescale/gianfar.c
@@ -1353,8 +1353,11 @@ static int gfar_restore(struct device *dev)
 	struct gfar_private *priv = dev_get_drvdata(dev);
 	struct net_device *ndev = priv->ndev;
 
-	if (!netif_running(ndev))
+	if (!netif_running(ndev)) {
+		netif_device_attach(ndev);
+
 		return 0;
+	}
 
 	gfar_init_bds(ndev);
 	init_registers(ndev);
-- 
cgit v1.2.3-70-g09d2