From df3e6548186f0baa727cd6d3a492891854bd31f2 Mon Sep 17 00:00:00 2001 From: Michael Chan Date: Fri, 26 May 2006 17:48:07 -0700 Subject: [TG3]: Add recovery logic when MMIOs are re-ordered Add recovery logic when we suspect that the system is re-ordering MMIOs. Re-ordered MMIOs to the send mailbox can cause bogus tx completions and hit BUG_ON() in the tx completion path. tg3 already has logic to handle re-ordered MMIOs by flushing the MMIOs that must be strictly ordered (such as the send mailbox). Determining when to enable the flush is currently a manual process of adding known chipsets to a list. The new code replaces the BUG_ON() in the tx completion path with the call to tg3_tx_recover(). It will set the TG3_FLAG_MBOX_WRITE_REORDER flag and reset the chip later in the workqueue to recover and start flushing MMIOs to the mailbox. A message to report the problem will be printed. We will then decide whether or not to add the host bridge to the list of chipsets that do re-ordering. We may add some additional code later to print the host bridge's ID so that the user can report it more easily. The assumption that re-ordering can only happen on x86 systems is also removed. Signed-off-by: Michael Chan Signed-off-by: David S. Miller --- drivers/net/tg3.c | 53 ++++++++++++++++++++++++++++++++++++++++++++++++----- drivers/net/tg3.h | 5 +---- 2 files changed, 49 insertions(+), 9 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/tg3.c b/drivers/net/tg3.c index cb0ebf83c84..9e61df60741 100644 --- a/drivers/net/tg3.c +++ b/drivers/net/tg3.c @@ -2967,6 +2967,29 @@ static int tg3_setup_phy(struct tg3 *tp, int force_reset) return err; } +/* This is called whenever we suspect that the system chipset is re- + * ordering the sequence of MMIO to the tx send mailbox. The symptom + * is bogus tx completions. We try to recover by setting the + * TG3_FLAG_MBOX_WRITE_REORDER flag and resetting the chip later + * in the workqueue. + */ +static void tg3_tx_recover(struct tg3 *tp) +{ + BUG_ON((tp->tg3_flags & TG3_FLAG_MBOX_WRITE_REORDER) || + tp->write32_tx_mbox == tg3_write_indirect_mbox); + + printk(KERN_WARNING PFX "%s: The system may be re-ordering memory-" + "mapped I/O cycles to the network device, attempting to " + "recover. Please report the problem to the driver maintainer " + "and include system chipset information.\n", tp->dev->name); + + spin_lock(&tp->lock); + spin_lock(&tp->tx_lock); + tp->tg3_flags |= TG3_FLAG_TX_RECOVERY_PENDING; + spin_unlock(&tp->tx_lock); + spin_unlock(&tp->lock); +} + /* Tigon3 never reports partial packet sends. So we do not * need special logic to handle SKBs that have not had all * of their frags sent yet, like SunGEM does. @@ -2979,9 +3002,13 @@ static void tg3_tx(struct tg3 *tp) while (sw_idx != hw_idx) { struct tx_ring_info *ri = &tp->tx_buffers[sw_idx]; struct sk_buff *skb = ri->skb; - int i; + int i, tx_bug = 0; + + if (unlikely(skb == NULL)) { + tg3_tx_recover(tp); + return; + } - BUG_ON(skb == NULL); pci_unmap_single(tp->pdev, pci_unmap_addr(ri, mapping), skb_headlen(skb), @@ -2992,10 +3019,9 @@ static void tg3_tx(struct tg3 *tp) sw_idx = NEXT_TX(sw_idx); for (i = 0; i < skb_shinfo(skb)->nr_frags; i++) { - BUG_ON(sw_idx == hw_idx); - ri = &tp->tx_buffers[sw_idx]; - BUG_ON(ri->skb != NULL); + if (unlikely(ri->skb != NULL || sw_idx == hw_idx)) + tx_bug = 1; pci_unmap_page(tp->pdev, pci_unmap_addr(ri, mapping), @@ -3006,6 +3032,11 @@ static void tg3_tx(struct tg3 *tp) } dev_kfree_skb(skb); + + if (unlikely(tx_bug)) { + tg3_tx_recover(tp); + return; + } } tp->tx_cons = sw_idx; @@ -3333,6 +3364,11 @@ static int tg3_poll(struct net_device *netdev, int *budget) /* run TX completion thread */ if (sblk->idx[0].tx_consumer != tp->tx_cons) { tg3_tx(tp); + if (unlikely(tp->tg3_flags & TG3_FLAG_TX_RECOVERY_PENDING)) { + netif_rx_complete(netdev); + schedule_work(&tp->reset_task); + return 0; + } } /* run RX thread, within the bounds set by NAPI. @@ -3581,6 +3617,13 @@ static void tg3_reset_task(void *_data) restart_timer = tp->tg3_flags2 & TG3_FLG2_RESTART_TIMER; tp->tg3_flags2 &= ~TG3_FLG2_RESTART_TIMER; + if (tp->tg3_flags & TG3_FLAG_TX_RECOVERY_PENDING) { + tp->write32_tx_mbox = tg3_write32_tx_mbox; + tp->write32_rx_mbox = tg3_write_flush_reg32; + tp->tg3_flags |= TG3_FLAG_MBOX_WRITE_REORDER; + tp->tg3_flags &= ~TG3_FLAG_TX_RECOVERY_PENDING; + } + tg3_halt(tp, RESET_KIND_SHUTDOWN, 0); tg3_init_hw(tp, 1); diff --git a/drivers/net/tg3.h b/drivers/net/tg3.h index ff0faab94bd..35669e18065 100644 --- a/drivers/net/tg3.h +++ b/drivers/net/tg3.h @@ -2155,11 +2155,7 @@ struct tg3 { #define TG3_FLAG_ENABLE_ASF 0x00000020 #define TG3_FLAG_5701_REG_WRITE_BUG 0x00000040 #define TG3_FLAG_POLL_SERDES 0x00000080 -#if defined(CONFIG_X86) #define TG3_FLAG_MBOX_WRITE_REORDER 0x00000100 -#else -#define TG3_FLAG_MBOX_WRITE_REORDER 0 /* disables code too */ -#endif #define TG3_FLAG_PCIX_TARGET_HWBUG 0x00000200 #define TG3_FLAG_WOL_SPEED_100MB 0x00000400 #define TG3_FLAG_WOL_ENABLE 0x00000800 @@ -2172,6 +2168,7 @@ struct tg3 { #define TG3_FLAG_PCI_HIGH_SPEED 0x00040000 #define TG3_FLAG_PCI_32BIT 0x00080000 #define TG3_FLAG_SRAM_USE_CONFIG 0x00100000 +#define TG3_FLAG_TX_RECOVERY_PENDING 0x00200000 #define TG3_FLAG_SERDES_WOL_CAP 0x00400000 #define TG3_FLAG_JUMBO_RING_ENABLE 0x00800000 #define TG3_FLAG_10_100_ONLY 0x01000000 -- cgit v1.2.3-70-g09d2