From f4bb2e9c4fa9e5fdddf90589703613fd1a9c519f Mon Sep 17 00:00:00 2001 From: Andy Gospodarek Date: Tue, 26 Jul 2011 11:12:27 +0000 Subject: bonding: fix string comparison errors When a bond contains a device where one name is the subset of another (eth1 and eth10, for example), one cannot properly set the primary device or the currently active device. This was reported and based on work by Takuma Umeya. I also verified the problem and tested that this fix resolves it. V2: A few did not like the the current code or my changes, so I refactored bonding_store_primary and bonding_store_active_slave to be a bit cleaner, dropped the use of strnicmp since we did not really need the comparison to be case insensitive, and formatted the input string from sysfs so a comparison to IFNAMSIZ could be used. I also discovered an error in bonding_store_active_slave that would modify bond->primary_slave rather than bond->curr_active_slave before forcing the bonding driver to choose a new active slave. V3: Actually sending the proper patch.... Signed-off-by: Andy Gospodarek Reported-by: Takuma Umeya Signed-off-by: David S. Miller --- drivers/net/bonding/bond_sysfs.c | 133 +++++++++++++++++++++------------------ 1 file changed, 71 insertions(+), 62 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/bonding/bond_sysfs.c b/drivers/net/bonding/bond_sysfs.c index b60835f5865..2dfb4bf9008 100644 --- a/drivers/net/bonding/bond_sysfs.c +++ b/drivers/net/bonding/bond_sysfs.c @@ -1025,6 +1025,7 @@ static ssize_t bonding_store_primary(struct device *d, int i; struct slave *slave; struct bonding *bond = to_bond(d); + char ifname[IFNAMSIZ]; if (!rtnl_trylock()) return restart_syscall(); @@ -1035,32 +1036,33 @@ static ssize_t bonding_store_primary(struct device *d, if (!USES_PRIMARY(bond->params.mode)) { pr_info("%s: Unable to set primary slave; %s is in mode %d\n", bond->dev->name, bond->dev->name, bond->params.mode); - } else { - bond_for_each_slave(bond, slave, i) { - if (strnicmp - (slave->dev->name, buf, - strlen(slave->dev->name)) == 0) { - pr_info("%s: Setting %s as primary slave.\n", - bond->dev->name, slave->dev->name); - bond->primary_slave = slave; - strcpy(bond->params.primary, slave->dev->name); - bond_select_active_slave(bond); - goto out; - } - } + goto out; + } - /* if we got here, then we didn't match the name of any slave */ + sscanf(buf, "%16s", ifname); /* IFNAMSIZ */ - if (strlen(buf) == 0 || buf[0] == '\n') { - pr_info("%s: Setting primary slave to None.\n", - bond->dev->name); - bond->primary_slave = NULL; - bond_select_active_slave(bond); - } else { - pr_info("%s: Unable to set %.*s as primary slave as it is not a slave.\n", - bond->dev->name, (int)strlen(buf) - 1, buf); + /* check to see if we are clearing primary */ + if (!strlen(ifname) || buf[0] == '\n') { + pr_info("%s: Setting primary slave to None.\n", + bond->dev->name); + bond->primary_slave = NULL; + bond_select_active_slave(bond); + goto out; + } + + bond_for_each_slave(bond, slave, i) { + if (strncmp(slave->dev->name, ifname, IFNAMSIZ) == 0) { + pr_info("%s: Setting %s as primary slave.\n", + bond->dev->name, slave->dev->name); + bond->primary_slave = slave; + strcpy(bond->params.primary, slave->dev->name); + bond_select_active_slave(bond); + goto out; } } + + pr_info("%s: Unable to set %.*s as primary slave.\n", + bond->dev->name, (int)strlen(buf) - 1, buf); out: write_unlock_bh(&bond->curr_slave_lock); read_unlock(&bond->lock); @@ -1195,6 +1197,7 @@ static ssize_t bonding_store_active_slave(struct device *d, struct slave *old_active = NULL; struct slave *new_active = NULL; struct bonding *bond = to_bond(d); + char ifname[IFNAMSIZ]; if (!rtnl_trylock()) return restart_syscall(); @@ -1203,56 +1206,62 @@ static ssize_t bonding_store_active_slave(struct device *d, read_lock(&bond->lock); write_lock_bh(&bond->curr_slave_lock); - if (!USES_PRIMARY(bond->params.mode)) + if (!USES_PRIMARY(bond->params.mode)) { pr_info("%s: Unable to change active slave; %s is in mode %d\n", bond->dev->name, bond->dev->name, bond->params.mode); - else { - bond_for_each_slave(bond, slave, i) { - if (strnicmp - (slave->dev->name, buf, - strlen(slave->dev->name)) == 0) { - old_active = bond->curr_active_slave; - new_active = slave; - if (new_active == old_active) { - /* do nothing */ - pr_info("%s: %s is already the current active slave.\n", + goto out; + } + + sscanf(buf, "%16s", ifname); /* IFNAMSIZ */ + + /* check to see if we are clearing active */ + if (!strlen(ifname) || buf[0] == '\n') { + pr_info("%s: Clearing current active slave.\n", + bond->dev->name); + bond->curr_active_slave = NULL; + bond_select_active_slave(bond); + goto out; + } + + bond_for_each_slave(bond, slave, i) { + if (strncmp(slave->dev->name, ifname, IFNAMSIZ) == 0) { + old_active = bond->curr_active_slave; + new_active = slave; + if (new_active == old_active) { + /* do nothing */ + pr_info("%s: %s is already the current" + " active slave.\n", + bond->dev->name, + slave->dev->name); + goto out; + } + else { + if ((new_active) && + (old_active) && + (new_active->link == BOND_LINK_UP) && + IS_UP(new_active->dev)) { + pr_info("%s: Setting %s as active" + " slave.\n", bond->dev->name, slave->dev->name); - goto out; + bond_change_active_slave(bond, + new_active); } else { - if ((new_active) && - (old_active) && - (new_active->link == BOND_LINK_UP) && - IS_UP(new_active->dev)) { - pr_info("%s: Setting %s as active slave.\n", - bond->dev->name, - slave->dev->name); - bond_change_active_slave(bond, new_active); - } - else { - pr_info("%s: Could not set %s as active slave; either %s is down or the link is down.\n", - bond->dev->name, - slave->dev->name, - slave->dev->name); - } - goto out; + pr_info("%s: Could not set %s as" + " active slave; either %s is" + " down or the link is down.\n", + bond->dev->name, + slave->dev->name, + slave->dev->name); } + goto out; } } - - /* if we got here, then we didn't match the name of any slave */ - - if (strlen(buf) == 0 || buf[0] == '\n') { - pr_info("%s: Setting active slave to None.\n", - bond->dev->name); - bond->primary_slave = NULL; - bond_select_active_slave(bond); - } else { - pr_info("%s: Unable to set %.*s as active slave as it is not a slave.\n", - bond->dev->name, (int)strlen(buf) - 1, buf); - } } + + pr_info("%s: Unable to set %.*s as active slave.\n", + bond->dev->name, (int)strlen(buf) - 1, buf); out: write_unlock_bh(&bond->curr_slave_lock); read_unlock(&bond->lock); -- cgit v1.2.3-70-g09d2