From 71f6bd4a23130cd2f4b036010c5790b1295290b9 Mon Sep 17 00:00:00 2001 From: Yinghai Lu Date: Mon, 30 Jan 2012 12:25:24 +0100 Subject: PCI: workaround hard-wired bus number V2 Fixes PCI device detection on IBM xSeries IBM 3850 M2 / x3950 M2 when using ACPI resources (_CRS). This is default, a manual workaround (without this patch) would be pci=nocrs boot param. V2: Add dev_warn if the workaround is hit. This should reveal how common such setups are (via google) and point to possible problems if things are still not working as expected. -> Suggested by Jan Beulich. Cc: stable@vger.kernel.org Tested-by: garyhade@us.ibm.com Signed-off-by: Yinghai Lu Signed-off-by: Jesse Barnes --- drivers/pci/probe.c | 5 +++++ 1 file changed, 5 insertions(+) (limited to 'drivers/pci') diff --git a/drivers/pci/probe.c b/drivers/pci/probe.c index 7cc9e2f0f47..71eac9cd724 100644 --- a/drivers/pci/probe.c +++ b/drivers/pci/probe.c @@ -651,6 +651,11 @@ int __devinit pci_scan_bridge(struct pci_bus *bus, struct pci_dev *dev, int max, dev_dbg(&dev->dev, "scanning [bus %02x-%02x] behind bridge, pass %d\n", secondary, subordinate, pass); + if (!primary && (primary != bus->number) && secondary && subordinate) { + dev_warn(&dev->dev, "Primary bus is hard wired to 0\n"); + primary = bus->number; + } + /* Check if setup is sensible at all */ if (!pass && (primary != bus->number || secondary <= bus->number)) { -- cgit v1.2.3-70-g09d2 From 8161fe91d8da34c1a231b6e2d4454b4b3179a5d4 Mon Sep 17 00:00:00 2001 From: Vaidyanathan Srinivasan Date: Thu, 2 Feb 2012 23:11:20 +0530 Subject: PCI: set pci sriov page size before reading SRIOV BAR For an SRIOV device, PCI_SRIOV_SYS_PGSIZE should be set before the PCI_SRIOV_BAR are queried. The sys pagesize defaults to 4k, so this change is required on powerpc box with 64k base page size. This is a regression caused due to moving SRIOV init to sriov_enable(). | commit afd24ece5c76af87f6fc477f2747b83a764f161c | Author: Ram Pai | PCI: delay configuration of SRIOV capability | The SRIOV capability, namely page size and total_vfs of a device are | configured during enumeration phase of the device. This can potentially | interfere with the PCI operations of the platform, if the IOV capability | of the device is not enabled. Signed-off-by: Vaidyanathan Srinivasan Acked-by: Ram Pai Signed-off-by: Jesse Barnes --- drivers/pci/iov.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) (limited to 'drivers/pci') diff --git a/drivers/pci/iov.c b/drivers/pci/iov.c index 0321fa3b422..0dab5ecf61b 100644 --- a/drivers/pci/iov.c +++ b/drivers/pci/iov.c @@ -347,8 +347,6 @@ static int sriov_enable(struct pci_dev *dev, int nr_virtfn) return rc; } - pci_write_config_dword(dev, iov->pos + PCI_SRIOV_SYS_PGSIZE, iov->pgsz); - iov->ctrl |= PCI_SRIOV_CTRL_VFE | PCI_SRIOV_CTRL_MSE; pci_cfg_access_lock(dev); pci_write_config_word(dev, iov->pos + PCI_SRIOV_CTRL, iov->ctrl); @@ -466,6 +464,7 @@ found: return -EIO; pgsz &= ~(pgsz - 1); + pci_write_config_dword(dev, pos + PCI_SRIOV_SYS_PGSIZE, pgsz); nres = 0; for (i = 0; i < PCI_SRIOV_NUM_BARS; i++) { -- cgit v1.2.3-70-g09d2 From 3682a3946d2b0bad621db871e3bead83e523a238 Mon Sep 17 00:00:00 2001 From: Yinghai Lu Date: Sat, 4 Feb 2012 22:55:00 -0800 Subject: PCI: Fix pci cardbus removal During test busn_res allocation with cardbus, found pci card removal is not working anymore, and it turns out it is broken by: |commit 79cc9601c3e42b4f0650fe7e69132ebce7ab48f9 |Date: Tue Nov 22 21:06:53 2011 -0800 | | PCI: Only call pci_stop_bus_device() one time for child devices at remove The above changed the behavior of pci_remove_behind_bridge that yenta_cardbus depended on. So restore the old behavoir of pci_remove_behind_bridge (which requires stopping and removing of all devices) by: 1. rename pci_remove_behind_bridge to __pci_remove_behind_bridge, and let __pci_remove_bus_device() call it instead. 2. add pci_stop_behind_bridge that will stop devices behind a bridge 3. add back pci_remove_behind_bridge that will stop and remove devices under bridge. -v2: update commit description a little bit. Tested-by: Dominik Brodowski Signed-off-by: Yinghai Lu Signed-off-by: Jesse Barnes --- drivers/pci/remove.c | 28 ++++++++++++++++++++++------ 1 file changed, 22 insertions(+), 6 deletions(-) (limited to 'drivers/pci') diff --git a/drivers/pci/remove.c b/drivers/pci/remove.c index 6def3624c68..ef8b18c48f2 100644 --- a/drivers/pci/remove.c +++ b/drivers/pci/remove.c @@ -77,6 +77,7 @@ void pci_remove_bus(struct pci_bus *pci_bus) } EXPORT_SYMBOL(pci_remove_bus); +static void __pci_remove_behind_bridge(struct pci_dev *dev); /** * pci_remove_bus_device - remove a PCI device and any children * @dev: the device to remove @@ -94,7 +95,7 @@ static void __pci_remove_bus_device(struct pci_dev *dev) if (dev->subordinate) { struct pci_bus *b = dev->subordinate; - pci_remove_behind_bridge(dev); + __pci_remove_behind_bridge(dev); pci_remove_bus(b); dev->subordinate = NULL; } @@ -107,6 +108,24 @@ void pci_remove_bus_device(struct pci_dev *dev) __pci_remove_bus_device(dev); } +static void __pci_remove_behind_bridge(struct pci_dev *dev) +{ + struct list_head *l, *n; + + if (dev->subordinate) + list_for_each_safe(l, n, &dev->subordinate->devices) + __pci_remove_bus_device(pci_dev_b(l)); +} + +static void pci_stop_behind_bridge(struct pci_dev *dev) +{ + struct list_head *l, *n; + + if (dev->subordinate) + list_for_each_safe(l, n, &dev->subordinate->devices) + pci_stop_bus_device(pci_dev_b(l)); +} + /** * pci_remove_behind_bridge - remove all devices behind a PCI bridge * @dev: PCI bridge device @@ -117,11 +136,8 @@ void pci_remove_bus_device(struct pci_dev *dev) */ void pci_remove_behind_bridge(struct pci_dev *dev) { - struct list_head *l, *n; - - if (dev->subordinate) - list_for_each_safe(l, n, &dev->subordinate->devices) - __pci_remove_bus_device(pci_dev_b(l)); + pci_stop_behind_bridge(dev); + __pci_remove_behind_bridge(dev); } static void pci_stop_bus_devices(struct pci_bus *bus) -- cgit v1.2.3-70-g09d2