From f9097dce5d799462e086adca28815dac5006bb30 Mon Sep 17 00:00:00 2001 From: Komuro Date: Sun, 28 Feb 2010 15:39:33 +0900 Subject: pcmcia: remove irq_list parameter from pd6729 Remoe the irq_list parameter from pd6729, as it can and should be set via sysfs (and -- if available -- pcmciautils, which reads the information from /etc/pcmcia/config.opts ) [linux@dominikbrodowski.net: updated commit message] Signed-off-by: Komuro Signed-off-by: Dominik Brodowski --- drivers/pcmcia/pd6729.c | 18 +----------------- 1 file changed, 1 insertion(+), 17 deletions(-) (limited to 'drivers/pcmcia') diff --git a/drivers/pcmcia/pd6729.c b/drivers/pcmcia/pd6729.c index e1741cd875a..7c204910a77 100644 --- a/drivers/pcmcia/pd6729.c +++ b/drivers/pcmcia/pd6729.c @@ -48,23 +48,13 @@ MODULE_AUTHOR("Jun Komuro "); * Specifies the interrupt delivery mode. The default (1) is to use PCI * interrupts; a value of 0 selects ISA interrupts. This must be set for * correct operation of PCI card readers. - * - * irq_list=i,j,... - * This list limits the set of interrupts that can be used by PCMCIA - * cards. - * The default list is 3,4,5,7,9,10,11. - * (irq_list parameter is not used, if irq_mode = 1) */ static int irq_mode = 1; /* 0 = ISA interrupt, 1 = PCI interrupt */ -static int irq_list[16]; -static unsigned int irq_list_count = 0; module_param(irq_mode, int, 0444); -module_param_array(irq_list, int, &irq_list_count, 0444); MODULE_PARM_DESC(irq_mode, "interrupt delivery mode. 0 = ISA, 1 = PCI. default is 1"); -MODULE_PARM_DESC(irq_list, "interrupts that can be used by PCMCIA cards"); static DEFINE_SPINLOCK(port_lock); @@ -605,13 +595,7 @@ static u_int __devinit pd6729_isa_scan(void) return 0; } - if (irq_list_count == 0) - mask0 = 0xffff; - else - for (i = mask0 = 0; i < irq_list_count; i++) - mask0 |= (1<