From ff80aa57cc9946d3dafe65119d576b3d11304303 Mon Sep 17 00:00:00 2001 From: Russell King Date: Tue, 17 Jan 2012 22:46:41 +0000 Subject: PCMCIA: sa1111: rename sa1111 socket drivers to have sa1111_ prefix. Acked-by: Dominik Brodowski Signed-off-by: Russell King --- drivers/pcmcia/Makefile | 8 +- drivers/pcmcia/pxa2xx_lubbock.c | 236 ------------------------------------- drivers/pcmcia/sa1100_badge4.c | 166 -------------------------- drivers/pcmcia/sa1100_jornada720.c | 114 ------------------ drivers/pcmcia/sa1100_neponset.c | 134 --------------------- drivers/pcmcia/sa1111_badge4.c | 166 ++++++++++++++++++++++++++ drivers/pcmcia/sa1111_jornada720.c | 114 ++++++++++++++++++ drivers/pcmcia/sa1111_lubbock.c | 236 +++++++++++++++++++++++++++++++++++++ drivers/pcmcia/sa1111_neponset.c | 134 +++++++++++++++++++++ 9 files changed, 654 insertions(+), 654 deletions(-) delete mode 100644 drivers/pcmcia/pxa2xx_lubbock.c delete mode 100644 drivers/pcmcia/sa1100_badge4.c delete mode 100644 drivers/pcmcia/sa1100_jornada720.c delete mode 100644 drivers/pcmcia/sa1100_neponset.c create mode 100644 drivers/pcmcia/sa1111_badge4.c create mode 100644 drivers/pcmcia/sa1111_jornada720.c create mode 100644 drivers/pcmcia/sa1111_lubbock.c create mode 100644 drivers/pcmcia/sa1111_neponset.c (limited to 'drivers/pcmcia') diff --git a/drivers/pcmcia/Makefile b/drivers/pcmcia/Makefile index 49d79f707cf..47525de6a63 100644 --- a/drivers/pcmcia/Makefile +++ b/drivers/pcmcia/Makefile @@ -40,10 +40,10 @@ obj-$(CONFIG_ELECTRA_CF) += electra_cf.o obj-$(CONFIG_PCMCIA_ALCHEMY_DEVBOARD) += db1xxx_ss.o sa1111_cs-y += sa1111_generic.o -sa1111_cs-$(CONFIG_ASSABET_NEPONSET) += sa1100_neponset.o -sa1111_cs-$(CONFIG_SA1100_BADGE4) += sa1100_badge4.o -sa1111_cs-$(CONFIG_SA1100_JORNADA720) += sa1100_jornada720.o -sa1111_cs-$(CONFIG_ARCH_LUBBOCK) += pxa2xx_lubbock.o +sa1111_cs-$(CONFIG_ASSABET_NEPONSET) += sa1111_neponset.o +sa1111_cs-$(CONFIG_SA1100_BADGE4) += sa1111_badge4.o +sa1111_cs-$(CONFIG_SA1100_JORNADA720) += sa1111_jornada720.o +sa1111_cs-$(CONFIG_ARCH_LUBBOCK) += sa1111_lubbock.o sa1100_cs-y += sa1100_generic.o sa1100_cs-$(CONFIG_SA1100_ASSABET) += sa1100_assabet.o diff --git a/drivers/pcmcia/pxa2xx_lubbock.c b/drivers/pcmcia/pxa2xx_lubbock.c deleted file mode 100644 index c5caf579045..00000000000 --- a/drivers/pcmcia/pxa2xx_lubbock.c +++ /dev/null @@ -1,236 +0,0 @@ -/* - * linux/drivers/pcmcia/pxa2xx_lubbock.c - * - * Author: George Davis - * Created: Jan 10, 2002 - * Copyright: MontaVista Software Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * Originally based upon linux/drivers/pcmcia/sa1100_neponset.c - * - * Lubbock PCMCIA specific routines. - * - */ -#include -#include -#include -#include -#include -#include - -#include -#include -#include -#include - -#include "sa1111_generic.h" - -static int -lubbock_pcmcia_configure_socket(struct soc_pcmcia_socket *skt, - const socket_state_t *state) -{ - struct sa1111_pcmcia_socket *s = to_skt(skt); - unsigned int pa_dwr_mask, pa_dwr_set, misc_mask, misc_set; - int ret = 0; - - pa_dwr_mask = pa_dwr_set = misc_mask = misc_set = 0; - - /* Lubbock uses the Maxim MAX1602, with the following connections: - * - * Socket 0 (PCMCIA): - * MAX1602 Lubbock Register - * Pin Signal - * ----- ------- ---------------------- - * A0VPP S0_PWR0 SA-1111 GPIO A<0> - * A1VPP S0_PWR1 SA-1111 GPIO A<1> - * A0VCC S0_PWR2 SA-1111 GPIO A<2> - * A1VCC S0_PWR3 SA-1111 GPIO A<3> - * VX VCC - * VY +3.3V - * 12IN +12V - * CODE +3.3V Cirrus Code, CODE = High (VY) - * - * Socket 1 (CF): - * MAX1602 Lubbock Register - * Pin Signal - * ----- ------- ---------------------- - * A0VPP GND VPP is not connected - * A1VPP GND VPP is not connected - * A0VCC S1_PWR0 MISC_WR<14> - * A1VCC S1_PWR1 MISC_WR<15> - * VX VCC - * VY +3.3V - * 12IN GND VPP is not connected - * CODE +3.3V Cirrus Code, CODE = High (VY) - * - */ - - again: - switch (skt->nr) { - case 0: - pa_dwr_mask = GPIO_A0 | GPIO_A1 | GPIO_A2 | GPIO_A3; - - switch (state->Vcc) { - case 0: /* Hi-Z */ - break; - - case 33: /* VY */ - pa_dwr_set |= GPIO_A3; - break; - - case 50: /* VX */ - pa_dwr_set |= GPIO_A2; - break; - - default: - printk(KERN_ERR "%s(): unrecognized Vcc %u\n", - __func__, state->Vcc); - ret = -1; - } - - switch (state->Vpp) { - case 0: /* Hi-Z */ - break; - - case 120: /* 12IN */ - pa_dwr_set |= GPIO_A1; - break; - - default: /* VCC */ - if (state->Vpp == state->Vcc) - pa_dwr_set |= GPIO_A0; - else { - printk(KERN_ERR "%s(): unrecognized Vpp %u\n", - __func__, state->Vpp); - ret = -1; - break; - } - } - break; - - case 1: - misc_mask = (1 << 15) | (1 << 14); - - switch (state->Vcc) { - case 0: /* Hi-Z */ - break; - - case 33: /* VY */ - misc_set |= 1 << 15; - break; - - case 50: /* VX */ - misc_set |= 1 << 14; - break; - - default: - printk(KERN_ERR "%s(): unrecognized Vcc %u\n", - __func__, state->Vcc); - ret = -1; - break; - } - - if (state->Vpp != state->Vcc && state->Vpp != 0) { - printk(KERN_ERR "%s(): CF slot cannot support Vpp %u\n", - __func__, state->Vpp); - ret = -1; - break; - } - break; - - default: - ret = -1; - } - - if (ret == 0) - ret = sa1111_pcmcia_configure_socket(skt, state); - - if (ret == 0) { - lubbock_set_misc_wr(misc_mask, misc_set); - sa1111_set_io(s->dev, pa_dwr_mask, pa_dwr_set); - } - -#if 1 - if (ret == 0 && state->Vcc == 33) { - struct pcmcia_state new_state; - - /* - * HACK ALERT: - * We can't sense the voltage properly on Lubbock before - * actually applying some power to the socket (catch 22). - * Resense the socket Voltage Sense pins after applying - * socket power. - * - * Note: It takes about 2.5ms for the MAX1602 VCC output - * to rise. - */ - mdelay(3); - - sa1111_pcmcia_socket_state(skt, &new_state); - - if (!new_state.vs_3v && !new_state.vs_Xv) { - /* - * Switch to 5V, Configure socket with 5V voltage - */ - lubbock_set_misc_wr(misc_mask, 0); - sa1111_set_io(s->dev, pa_dwr_mask, 0); - - /* - * It takes about 100ms to turn off Vcc. - */ - mdelay(100); - - /* - * We need to hack around the const qualifier as - * well to keep this ugly workaround localized and - * not force it to the rest of the code. Barf bags - * available in the seat pocket in front of you! - */ - ((socket_state_t *)state)->Vcc = 50; - ((socket_state_t *)state)->Vpp = 50; - goto again; - } - } -#endif - - return ret; -} - -static struct pcmcia_low_level lubbock_pcmcia_ops = { - .owner = THIS_MODULE, - .configure_socket = lubbock_pcmcia_configure_socket, - .first = 0, - .nr = 2, -}; - -#include "pxa2xx_base.h" - -int pcmcia_lubbock_init(struct sa1111_dev *sadev) -{ - int ret = -ENODEV; - - if (machine_is_lubbock()) { - /* - * Set GPIO_A<3:0> to be outputs for the MAX1600, - * and switch to standby mode. - */ - sa1111_set_io_dir(sadev, GPIO_A0|GPIO_A1|GPIO_A2|GPIO_A3, 0, 0); - sa1111_set_io(sadev, GPIO_A0|GPIO_A1|GPIO_A2|GPIO_A3, 0); - sa1111_set_sleep_io(sadev, GPIO_A0|GPIO_A1|GPIO_A2|GPIO_A3, 0); - - /* Set CF Socket 1 power to standby mode. */ - lubbock_set_misc_wr((1 << 15) | (1 << 14), 0); - - pxa2xx_drv_pcmcia_ops(&lubbock_pcmcia_ops); - pxa2xx_configure_sockets(&sadev->dev); - ret = sa1111_pcmcia_add(sadev, &lubbock_pcmcia_ops, - pxa2xx_drv_pcmcia_add_one); - } - - return ret; -} - -MODULE_LICENSE("GPL"); diff --git a/drivers/pcmcia/sa1100_badge4.c b/drivers/pcmcia/sa1100_badge4.c deleted file mode 100644 index 4d206f4dd67..00000000000 --- a/drivers/pcmcia/sa1100_badge4.c +++ /dev/null @@ -1,166 +0,0 @@ -/* - * linux/drivers/pcmcia/sa1100_badge4.c - * - * BadgePAD 4 PCMCIA specific routines - * - * Christopher Hoover - * - * Copyright (C) 2002 Hewlett-Packard Company - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - */ -#include -#include -#include -#include -#include - -#include -#include -#include -#include - -#include "sa1111_generic.h" - -/* - * BadgePAD 4 Details - * - * PCM Vcc: - * - * PCM Vcc on BadgePAD 4 can be jumpered for 3v3 (short pins 1 and 3 - * on JP6) or 5v0 (short pins 3 and 5 on JP6). - * - * PCM Vpp: - * - * PCM Vpp on BadgePAD 4 can be jumpered for 12v0 (short pins 4 and 6 - * on JP6) or tied to PCM Vcc (short pins 2 and 4 on JP6). N.B., - * 12v0 operation requires that the power supply actually supply 12v0 - * via pin 7 of JP7. - * - * CF Vcc: - * - * CF Vcc on BadgePAD 4 can be jumpered either for 3v3 (short pins 1 - * and 2 on JP10) or 5v0 (short pins 2 and 3 on JP10). - * - * Unfortunately there's no way programmatically to determine how a - * given board is jumpered. This code assumes a default jumpering - * as described below. - * - * If the defaults aren't correct, you may override them with a pcmv - * setup argument: pcmv=,,. The units are - * tenths of volts; e.g. pcmv=33,120,50 indicates 3v3 PCM Vcc, 12v0 - * PCM Vpp, and 5v0 CF Vcc. - * - */ - -static int badge4_pcmvcc = 50; /* pins 3 and 5 jumpered on JP6 */ -static int badge4_pcmvpp = 50; /* pins 2 and 4 jumpered on JP6 */ -static int badge4_cfvcc = 33; /* pins 1 and 2 jumpered on JP10 */ - -static void complain_about_jumpering(const char *whom, - const char *supply, - int given, int wanted) -{ - printk(KERN_ERR - "%s: %s %d.%dV wanted but board is jumpered for %s %d.%dV operation" - "; re-jumper the board and/or use pcmv=xx,xx,xx\n", - whom, supply, - wanted / 10, wanted % 10, - supply, - given / 10, given % 10); -} - -static int -badge4_pcmcia_configure_socket(struct soc_pcmcia_socket *skt, const socket_state_t *state) -{ - int ret; - - switch (skt->nr) { - case 0: - if ((state->Vcc != 0) && - (state->Vcc != badge4_pcmvcc)) { - complain_about_jumpering(__func__, "pcmvcc", - badge4_pcmvcc, state->Vcc); - // Apply power regardless of the jumpering. - // return -1; - } - if ((state->Vpp != 0) && - (state->Vpp != badge4_pcmvpp)) { - complain_about_jumpering(__func__, "pcmvpp", - badge4_pcmvpp, state->Vpp); - return -1; - } - break; - - case 1: - if ((state->Vcc != 0) && - (state->Vcc != badge4_cfvcc)) { - complain_about_jumpering(__func__, "cfvcc", - badge4_cfvcc, state->Vcc); - return -1; - } - break; - - default: - return -1; - } - - ret = sa1111_pcmcia_configure_socket(skt, state); - if (ret == 0) { - unsigned long flags; - int need5V; - - local_irq_save(flags); - - need5V = ((state->Vcc == 50) || (state->Vpp == 50)); - - badge4_set_5V(BADGE4_5V_PCMCIA_SOCK(skt->nr), need5V); - - local_irq_restore(flags); - } - - return ret; -} - -static struct pcmcia_low_level badge4_pcmcia_ops = { - .owner = THIS_MODULE, - .configure_socket = badge4_pcmcia_configure_socket, - .first = 0, - .nr = 2, -}; - -int pcmcia_badge4_init(struct device *dev) -{ - int ret = -ENODEV; - - if (machine_is_badge4()) { - printk(KERN_INFO - "%s: badge4_pcmvcc=%d, badge4_pcmvpp=%d, badge4_cfvcc=%d\n", - __func__, - badge4_pcmvcc, badge4_pcmvpp, badge4_cfvcc); - - sa11xx_drv_pcmcia_ops(&badge4_pcmcia_ops); - ret = sa1111_pcmcia_add(dev, &badge4_pcmcia_ops, - sa11xx_drv_pcmcia_add_one); - } - - return ret; -} - -static int __init pcmv_setup(char *s) -{ - int v[4]; - - s = get_options(s, ARRAY_SIZE(v), v); - - if (v[0] >= 1) badge4_pcmvcc = v[1]; - if (v[0] >= 2) badge4_pcmvpp = v[2]; - if (v[0] >= 3) badge4_cfvcc = v[3]; - - return 1; -} - -__setup("pcmv=", pcmv_setup); diff --git a/drivers/pcmcia/sa1100_jornada720.c b/drivers/pcmcia/sa1100_jornada720.c deleted file mode 100644 index 69428d1f5ae..00000000000 --- a/drivers/pcmcia/sa1100_jornada720.c +++ /dev/null @@ -1,114 +0,0 @@ -/* - * drivers/pcmcia/sa1100_jornada720.c - * - * Jornada720 PCMCIA specific routines - * - */ -#include -#include -#include -#include -#include - -#include -#include -#include - -#include "sa1111_generic.h" - -/* Does SOCKET1_3V actually do anything? */ -#define SOCKET0_POWER GPIO_GPIO0 -#define SOCKET0_3V GPIO_GPIO2 -#define SOCKET1_POWER (GPIO_GPIO1 | GPIO_GPIO3) -#define SOCKET1_3V GPIO_GPIO3 - -static int -jornada720_pcmcia_configure_socket(struct soc_pcmcia_socket *skt, const socket_state_t *state) -{ - struct sa1111_pcmcia_socket *s = to_skt(skt); - unsigned int pa_dwr_mask, pa_dwr_set; - int ret; - - printk(KERN_INFO "%s(): config socket %d vcc %d vpp %d\n", __func__, - skt->nr, state->Vcc, state->Vpp); - - switch (skt->nr) { - case 0: - pa_dwr_mask = SOCKET0_POWER | SOCKET0_3V; - - switch (state->Vcc) { - default: - case 0: - pa_dwr_set = 0; - break; - case 33: - pa_dwr_set = SOCKET0_POWER | SOCKET0_3V; - break; - case 50: - pa_dwr_set = SOCKET0_POWER; - break; - } - break; - - case 1: - pa_dwr_mask = SOCKET1_POWER; - - switch (state->Vcc) { - default: - case 0: - pa_dwr_set = 0; - break; - case 33: - pa_dwr_set = SOCKET1_POWER; - break; - case 50: - pa_dwr_set = SOCKET1_POWER; - break; - } - break; - - default: - return -1; - } - - if (state->Vpp != state->Vcc && state->Vpp != 0) { - printk(KERN_ERR "%s(): slot cannot support VPP %u\n", - __func__, state->Vpp); - return -EPERM; - } - - ret = sa1111_pcmcia_configure_socket(skt, state); - if (ret == 0) - sa1111_set_io(s->dev, pa_dwr_mask, pa_dwr_set); - - return ret; -} - -static struct pcmcia_low_level jornada720_pcmcia_ops = { - .owner = THIS_MODULE, - .configure_socket = jornada720_pcmcia_configure_socket, - .first = 0, - .nr = 2, -}; - -int __devinit pcmcia_jornada720_init(struct device *dev) -{ - int ret = -ENODEV; - - if (machine_is_jornada720()) { - unsigned int pin = GPIO_A0 | GPIO_A1 | GPIO_A2 | GPIO_A3; - - GRER |= 0x00000002; - - /* Set GPIO_A<3:1> to be outputs for PCMCIA/CF power controller: */ - sa1111_set_io_dir(dev, pin, 0, 0); - sa1111_set_io(dev, pin, 0); - sa1111_set_sleep_io(dev, pin, 0); - - sa11xx_drv_pcmcia_ops(&jornada720_pcmcia_ops); - ret = sa1111_pcmcia_add(dev, &jornada720_pcmcia_ops, - sa11xx_drv_pcmcia_add_one); - } - - return ret; -} diff --git a/drivers/pcmcia/sa1100_neponset.c b/drivers/pcmcia/sa1100_neponset.c deleted file mode 100644 index 50f297d850e..00000000000 --- a/drivers/pcmcia/sa1100_neponset.c +++ /dev/null @@ -1,134 +0,0 @@ -/* - * linux/drivers/pcmcia/sa1100_neponset.c - * - * Neponset PCMCIA specific routines - */ -#include -#include -#include -#include -#include - -#include -#include -#include -#include - -#include "sa1111_generic.h" - -/* - * Neponset uses the Maxim MAX1600, with the following connections: - * - * MAX1600 Neponset - * - * A0VCC SA-1111 GPIO A<1> - * A1VCC SA-1111 GPIO A<0> - * A0VPP CPLD NCR A0VPP - * A1VPP CPLD NCR A1VPP - * B0VCC SA-1111 GPIO A<2> - * B1VCC SA-1111 GPIO A<3> - * B0VPP ground (slot B is CF) - * B1VPP ground (slot B is CF) - * - * VX VCC (5V) - * VY VCC3_3 (3.3V) - * 12INA 12V - * 12INB ground (slot B is CF) - * - * The MAX1600 CODE pin is tied to ground, placing the device in - * "Standard Intel code" mode. Refer to the Maxim data sheet for - * the corresponding truth table. - */ - -static int -neponset_pcmcia_configure_socket(struct soc_pcmcia_socket *skt, const socket_state_t *state) -{ - struct sa1111_pcmcia_socket *s = to_skt(skt); - unsigned int ncr_mask, ncr_set, pa_dwr_mask, pa_dwr_set; - int ret; - - switch (skt->nr) { - case 0: - pa_dwr_mask = GPIO_A0 | GPIO_A1; - ncr_mask = NCR_A0VPP | NCR_A1VPP; - - if (state->Vpp == 0) - ncr_set = 0; - else if (state->Vpp == 120) - ncr_set = NCR_A1VPP; - else if (state->Vpp == state->Vcc) - ncr_set = NCR_A0VPP; - else { - printk(KERN_ERR "%s(): unrecognized VPP %u\n", - __func__, state->Vpp); - return -1; - } - break; - - case 1: - pa_dwr_mask = GPIO_A2 | GPIO_A3; - ncr_mask = 0; - ncr_set = 0; - - if (state->Vpp != state->Vcc && state->Vpp != 0) { - printk(KERN_ERR "%s(): CF slot cannot support VPP %u\n", - __func__, state->Vpp); - return -1; - } - break; - - default: - return -1; - } - - /* - * pa_dwr_set is the mask for selecting Vcc on both sockets. - * pa_dwr_mask selects which bits (and therefore socket) we change. - */ - switch (state->Vcc) { - default: - case 0: pa_dwr_set = 0; break; - case 33: pa_dwr_set = GPIO_A1|GPIO_A2; break; - case 50: pa_dwr_set = GPIO_A0|GPIO_A3; break; - } - - ret = sa1111_pcmcia_configure_socket(skt, state); - if (ret == 0) { - unsigned long flags; - - local_irq_save(flags); - NCR_0 = (NCR_0 & ~ncr_mask) | ncr_set; - - local_irq_restore(flags); - sa1111_set_io(s->dev, pa_dwr_mask, pa_dwr_set); - } - - return ret; -} - -static struct pcmcia_low_level neponset_pcmcia_ops = { - .owner = THIS_MODULE, - .configure_socket = neponset_pcmcia_configure_socket, - .first = 0, - .nr = 2, -}; - -int pcmcia_neponset_init(struct sa1111_dev *sadev) -{ - int ret = -ENODEV; - - if (machine_is_assabet()) { - /* - * Set GPIO_A<3:0> to be outputs for the MAX1600, - * and switch to standby mode. - */ - sa1111_set_io_dir(sadev, GPIO_A0|GPIO_A1|GPIO_A2|GPIO_A3, 0, 0); - sa1111_set_io(sadev, GPIO_A0|GPIO_A1|GPIO_A2|GPIO_A3, 0); - sa1111_set_sleep_io(sadev, GPIO_A0|GPIO_A1|GPIO_A2|GPIO_A3, 0); - sa11xx_drv_pcmcia_ops(&neponset_pcmcia_ops); - ret = sa1111_pcmcia_add(sadev, &neponset_pcmcia_ops, - sa11xx_drv_pcmcia_add_one); - } - - return ret; -} diff --git a/drivers/pcmcia/sa1111_badge4.c b/drivers/pcmcia/sa1111_badge4.c new file mode 100644 index 00000000000..4d206f4dd67 --- /dev/null +++ b/drivers/pcmcia/sa1111_badge4.c @@ -0,0 +1,166 @@ +/* + * linux/drivers/pcmcia/sa1100_badge4.c + * + * BadgePAD 4 PCMCIA specific routines + * + * Christopher Hoover + * + * Copyright (C) 2002 Hewlett-Packard Company + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ +#include +#include +#include +#include +#include + +#include +#include +#include +#include + +#include "sa1111_generic.h" + +/* + * BadgePAD 4 Details + * + * PCM Vcc: + * + * PCM Vcc on BadgePAD 4 can be jumpered for 3v3 (short pins 1 and 3 + * on JP6) or 5v0 (short pins 3 and 5 on JP6). + * + * PCM Vpp: + * + * PCM Vpp on BadgePAD 4 can be jumpered for 12v0 (short pins 4 and 6 + * on JP6) or tied to PCM Vcc (short pins 2 and 4 on JP6). N.B., + * 12v0 operation requires that the power supply actually supply 12v0 + * via pin 7 of JP7. + * + * CF Vcc: + * + * CF Vcc on BadgePAD 4 can be jumpered either for 3v3 (short pins 1 + * and 2 on JP10) or 5v0 (short pins 2 and 3 on JP10). + * + * Unfortunately there's no way programmatically to determine how a + * given board is jumpered. This code assumes a default jumpering + * as described below. + * + * If the defaults aren't correct, you may override them with a pcmv + * setup argument: pcmv=,,. The units are + * tenths of volts; e.g. pcmv=33,120,50 indicates 3v3 PCM Vcc, 12v0 + * PCM Vpp, and 5v0 CF Vcc. + * + */ + +static int badge4_pcmvcc = 50; /* pins 3 and 5 jumpered on JP6 */ +static int badge4_pcmvpp = 50; /* pins 2 and 4 jumpered on JP6 */ +static int badge4_cfvcc = 33; /* pins 1 and 2 jumpered on JP10 */ + +static void complain_about_jumpering(const char *whom, + const char *supply, + int given, int wanted) +{ + printk(KERN_ERR + "%s: %s %d.%dV wanted but board is jumpered for %s %d.%dV operation" + "; re-jumper the board and/or use pcmv=xx,xx,xx\n", + whom, supply, + wanted / 10, wanted % 10, + supply, + given / 10, given % 10); +} + +static int +badge4_pcmcia_configure_socket(struct soc_pcmcia_socket *skt, const socket_state_t *state) +{ + int ret; + + switch (skt->nr) { + case 0: + if ((state->Vcc != 0) && + (state->Vcc != badge4_pcmvcc)) { + complain_about_jumpering(__func__, "pcmvcc", + badge4_pcmvcc, state->Vcc); + // Apply power regardless of the jumpering. + // return -1; + } + if ((state->Vpp != 0) && + (state->Vpp != badge4_pcmvpp)) { + complain_about_jumpering(__func__, "pcmvpp", + badge4_pcmvpp, state->Vpp); + return -1; + } + break; + + case 1: + if ((state->Vcc != 0) && + (state->Vcc != badge4_cfvcc)) { + complain_about_jumpering(__func__, "cfvcc", + badge4_cfvcc, state->Vcc); + return -1; + } + break; + + default: + return -1; + } + + ret = sa1111_pcmcia_configure_socket(skt, state); + if (ret == 0) { + unsigned long flags; + int need5V; + + local_irq_save(flags); + + need5V = ((state->Vcc == 50) || (state->Vpp == 50)); + + badge4_set_5V(BADGE4_5V_PCMCIA_SOCK(skt->nr), need5V); + + local_irq_restore(flags); + } + + return ret; +} + +static struct pcmcia_low_level badge4_pcmcia_ops = { + .owner = THIS_MODULE, + .configure_socket = badge4_pcmcia_configure_socket, + .first = 0, + .nr = 2, +}; + +int pcmcia_badge4_init(struct device *dev) +{ + int ret = -ENODEV; + + if (machine_is_badge4()) { + printk(KERN_INFO + "%s: badge4_pcmvcc=%d, badge4_pcmvpp=%d, badge4_cfvcc=%d\n", + __func__, + badge4_pcmvcc, badge4_pcmvpp, badge4_cfvcc); + + sa11xx_drv_pcmcia_ops(&badge4_pcmcia_ops); + ret = sa1111_pcmcia_add(dev, &badge4_pcmcia_ops, + sa11xx_drv_pcmcia_add_one); + } + + return ret; +} + +static int __init pcmv_setup(char *s) +{ + int v[4]; + + s = get_options(s, ARRAY_SIZE(v), v); + + if (v[0] >= 1) badge4_pcmvcc = v[1]; + if (v[0] >= 2) badge4_pcmvpp = v[2]; + if (v[0] >= 3) badge4_cfvcc = v[3]; + + return 1; +} + +__setup("pcmv=", pcmv_setup); diff --git a/drivers/pcmcia/sa1111_jornada720.c b/drivers/pcmcia/sa1111_jornada720.c new file mode 100644 index 00000000000..69428d1f5ae --- /dev/null +++ b/drivers/pcmcia/sa1111_jornada720.c @@ -0,0 +1,114 @@ +/* + * drivers/pcmcia/sa1100_jornada720.c + * + * Jornada720 PCMCIA specific routines + * + */ +#include +#include +#include +#include +#include + +#include +#include +#include + +#include "sa1111_generic.h" + +/* Does SOCKET1_3V actually do anything? */ +#define SOCKET0_POWER GPIO_GPIO0 +#define SOCKET0_3V GPIO_GPIO2 +#define SOCKET1_POWER (GPIO_GPIO1 | GPIO_GPIO3) +#define SOCKET1_3V GPIO_GPIO3 + +static int +jornada720_pcmcia_configure_socket(struct soc_pcmcia_socket *skt, const socket_state_t *state) +{ + struct sa1111_pcmcia_socket *s = to_skt(skt); + unsigned int pa_dwr_mask, pa_dwr_set; + int ret; + + printk(KERN_INFO "%s(): config socket %d vcc %d vpp %d\n", __func__, + skt->nr, state->Vcc, state->Vpp); + + switch (skt->nr) { + case 0: + pa_dwr_mask = SOCKET0_POWER | SOCKET0_3V; + + switch (state->Vcc) { + default: + case 0: + pa_dwr_set = 0; + break; + case 33: + pa_dwr_set = SOCKET0_POWER | SOCKET0_3V; + break; + case 50: + pa_dwr_set = SOCKET0_POWER; + break; + } + break; + + case 1: + pa_dwr_mask = SOCKET1_POWER; + + switch (state->Vcc) { + default: + case 0: + pa_dwr_set = 0; + break; + case 33: + pa_dwr_set = SOCKET1_POWER; + break; + case 50: + pa_dwr_set = SOCKET1_POWER; + break; + } + break; + + default: + return -1; + } + + if (state->Vpp != state->Vcc && state->Vpp != 0) { + printk(KERN_ERR "%s(): slot cannot support VPP %u\n", + __func__, state->Vpp); + return -EPERM; + } + + ret = sa1111_pcmcia_configure_socket(skt, state); + if (ret == 0) + sa1111_set_io(s->dev, pa_dwr_mask, pa_dwr_set); + + return ret; +} + +static struct pcmcia_low_level jornada720_pcmcia_ops = { + .owner = THIS_MODULE, + .configure_socket = jornada720_pcmcia_configure_socket, + .first = 0, + .nr = 2, +}; + +int __devinit pcmcia_jornada720_init(struct device *dev) +{ + int ret = -ENODEV; + + if (machine_is_jornada720()) { + unsigned int pin = GPIO_A0 | GPIO_A1 | GPIO_A2 | GPIO_A3; + + GRER |= 0x00000002; + + /* Set GPIO_A<3:1> to be outputs for PCMCIA/CF power controller: */ + sa1111_set_io_dir(dev, pin, 0, 0); + sa1111_set_io(dev, pin, 0); + sa1111_set_sleep_io(dev, pin, 0); + + sa11xx_drv_pcmcia_ops(&jornada720_pcmcia_ops); + ret = sa1111_pcmcia_add(dev, &jornada720_pcmcia_ops, + sa11xx_drv_pcmcia_add_one); + } + + return ret; +} diff --git a/drivers/pcmcia/sa1111_lubbock.c b/drivers/pcmcia/sa1111_lubbock.c new file mode 100644 index 00000000000..c5caf579045 --- /dev/null +++ b/drivers/pcmcia/sa1111_lubbock.c @@ -0,0 +1,236 @@ +/* + * linux/drivers/pcmcia/pxa2xx_lubbock.c + * + * Author: George Davis + * Created: Jan 10, 2002 + * Copyright: MontaVista Software Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * Originally based upon linux/drivers/pcmcia/sa1100_neponset.c + * + * Lubbock PCMCIA specific routines. + * + */ +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include + +#include "sa1111_generic.h" + +static int +lubbock_pcmcia_configure_socket(struct soc_pcmcia_socket *skt, + const socket_state_t *state) +{ + struct sa1111_pcmcia_socket *s = to_skt(skt); + unsigned int pa_dwr_mask, pa_dwr_set, misc_mask, misc_set; + int ret = 0; + + pa_dwr_mask = pa_dwr_set = misc_mask = misc_set = 0; + + /* Lubbock uses the Maxim MAX1602, with the following connections: + * + * Socket 0 (PCMCIA): + * MAX1602 Lubbock Register + * Pin Signal + * ----- ------- ---------------------- + * A0VPP S0_PWR0 SA-1111 GPIO A<0> + * A1VPP S0_PWR1 SA-1111 GPIO A<1> + * A0VCC S0_PWR2 SA-1111 GPIO A<2> + * A1VCC S0_PWR3 SA-1111 GPIO A<3> + * VX VCC + * VY +3.3V + * 12IN +12V + * CODE +3.3V Cirrus Code, CODE = High (VY) + * + * Socket 1 (CF): + * MAX1602 Lubbock Register + * Pin Signal + * ----- ------- ---------------------- + * A0VPP GND VPP is not connected + * A1VPP GND VPP is not connected + * A0VCC S1_PWR0 MISC_WR<14> + * A1VCC S1_PWR1 MISC_WR<15> + * VX VCC + * VY +3.3V + * 12IN GND VPP is not connected + * CODE +3.3V Cirrus Code, CODE = High (VY) + * + */ + + again: + switch (skt->nr) { + case 0: + pa_dwr_mask = GPIO_A0 | GPIO_A1 | GPIO_A2 | GPIO_A3; + + switch (state->Vcc) { + case 0: /* Hi-Z */ + break; + + case 33: /* VY */ + pa_dwr_set |= GPIO_A3; + break; + + case 50: /* VX */ + pa_dwr_set |= GPIO_A2; + break; + + default: + printk(KERN_ERR "%s(): unrecognized Vcc %u\n", + __func__, state->Vcc); + ret = -1; + } + + switch (state->Vpp) { + case 0: /* Hi-Z */ + break; + + case 120: /* 12IN */ + pa_dwr_set |= GPIO_A1; + break; + + default: /* VCC */ + if (state->Vpp == state->Vcc) + pa_dwr_set |= GPIO_A0; + else { + printk(KERN_ERR "%s(): unrecognized Vpp %u\n", + __func__, state->Vpp); + ret = -1; + break; + } + } + break; + + case 1: + misc_mask = (1 << 15) | (1 << 14); + + switch (state->Vcc) { + case 0: /* Hi-Z */ + break; + + case 33: /* VY */ + misc_set |= 1 << 15; + break; + + case 50: /* VX */ + misc_set |= 1 << 14; + break; + + default: + printk(KERN_ERR "%s(): unrecognized Vcc %u\n", + __func__, state->Vcc); + ret = -1; + break; + } + + if (state->Vpp != state->Vcc && state->Vpp != 0) { + printk(KERN_ERR "%s(): CF slot cannot support Vpp %u\n", + __func__, state->Vpp); + ret = -1; + break; + } + break; + + default: + ret = -1; + } + + if (ret == 0) + ret = sa1111_pcmcia_configure_socket(skt, state); + + if (ret == 0) { + lubbock_set_misc_wr(misc_mask, misc_set); + sa1111_set_io(s->dev, pa_dwr_mask, pa_dwr_set); + } + +#if 1 + if (ret == 0 && state->Vcc == 33) { + struct pcmcia_state new_state; + + /* + * HACK ALERT: + * We can't sense the voltage properly on Lubbock before + * actually applying some power to the socket (catch 22). + * Resense the socket Voltage Sense pins after applying + * socket power. + * + * Note: It takes about 2.5ms for the MAX1602 VCC output + * to rise. + */ + mdelay(3); + + sa1111_pcmcia_socket_state(skt, &new_state); + + if (!new_state.vs_3v && !new_state.vs_Xv) { + /* + * Switch to 5V, Configure socket with 5V voltage + */ + lubbock_set_misc_wr(misc_mask, 0); + sa1111_set_io(s->dev, pa_dwr_mask, 0); + + /* + * It takes about 100ms to turn off Vcc. + */ + mdelay(100); + + /* + * We need to hack around the const qualifier as + * well to keep this ugly workaround localized and + * not force it to the rest of the code. Barf bags + * available in the seat pocket in front of you! + */ + ((socket_state_t *)state)->Vcc = 50; + ((socket_state_t *)state)->Vpp = 50; + goto again; + } + } +#endif + + return ret; +} + +static struct pcmcia_low_level lubbock_pcmcia_ops = { + .owner = THIS_MODULE, + .configure_socket = lubbock_pcmcia_configure_socket, + .first = 0, + .nr = 2, +}; + +#include "pxa2xx_base.h" + +int pcmcia_lubbock_init(struct sa1111_dev *sadev) +{ + int ret = -ENODEV; + + if (machine_is_lubbock()) { + /* + * Set GPIO_A<3:0> to be outputs for the MAX1600, + * and switch to standby mode. + */ + sa1111_set_io_dir(sadev, GPIO_A0|GPIO_A1|GPIO_A2|GPIO_A3, 0, 0); + sa1111_set_io(sadev, GPIO_A0|GPIO_A1|GPIO_A2|GPIO_A3, 0); + sa1111_set_sleep_io(sadev, GPIO_A0|GPIO_A1|GPIO_A2|GPIO_A3, 0); + + /* Set CF Socket 1 power to standby mode. */ + lubbock_set_misc_wr((1 << 15) | (1 << 14), 0); + + pxa2xx_drv_pcmcia_ops(&lubbock_pcmcia_ops); + pxa2xx_configure_sockets(&sadev->dev); + ret = sa1111_pcmcia_add(sadev, &lubbock_pcmcia_ops, + pxa2xx_drv_pcmcia_add_one); + } + + return ret; +} + +MODULE_LICENSE("GPL"); diff --git a/drivers/pcmcia/sa1111_neponset.c b/drivers/pcmcia/sa1111_neponset.c new file mode 100644 index 00000000000..50f297d850e --- /dev/null +++ b/drivers/pcmcia/sa1111_neponset.c @@ -0,0 +1,134 @@ +/* + * linux/drivers/pcmcia/sa1100_neponset.c + * + * Neponset PCMCIA specific routines + */ +#include +#include +#include +#include +#include + +#include +#include +#include +#include + +#include "sa1111_generic.h" + +/* + * Neponset uses the Maxim MAX1600, with the following connections: + * + * MAX1600 Neponset + * + * A0VCC SA-1111 GPIO A<1> + * A1VCC SA-1111 GPIO A<0> + * A0VPP CPLD NCR A0VPP + * A1VPP CPLD NCR A1VPP + * B0VCC SA-1111 GPIO A<2> + * B1VCC SA-1111 GPIO A<3> + * B0VPP ground (slot B is CF) + * B1VPP ground (slot B is CF) + * + * VX VCC (5V) + * VY VCC3_3 (3.3V) + * 12INA 12V + * 12INB ground (slot B is CF) + * + * The MAX1600 CODE pin is tied to ground, placing the device in + * "Standard Intel code" mode. Refer to the Maxim data sheet for + * the corresponding truth table. + */ + +static int +neponset_pcmcia_configure_socket(struct soc_pcmcia_socket *skt, const socket_state_t *state) +{ + struct sa1111_pcmcia_socket *s = to_skt(skt); + unsigned int ncr_mask, ncr_set, pa_dwr_mask, pa_dwr_set; + int ret; + + switch (skt->nr) { + case 0: + pa_dwr_mask = GPIO_A0 | GPIO_A1; + ncr_mask = NCR_A0VPP | NCR_A1VPP; + + if (state->Vpp == 0) + ncr_set = 0; + else if (state->Vpp == 120) + ncr_set = NCR_A1VPP; + else if (state->Vpp == state->Vcc) + ncr_set = NCR_A0VPP; + else { + printk(KERN_ERR "%s(): unrecognized VPP %u\n", + __func__, state->Vpp); + return -1; + } + break; + + case 1: + pa_dwr_mask = GPIO_A2 | GPIO_A3; + ncr_mask = 0; + ncr_set = 0; + + if (state->Vpp != state->Vcc && state->Vpp != 0) { + printk(KERN_ERR "%s(): CF slot cannot support VPP %u\n", + __func__, state->Vpp); + return -1; + } + break; + + default: + return -1; + } + + /* + * pa_dwr_set is the mask for selecting Vcc on both sockets. + * pa_dwr_mask selects which bits (and therefore socket) we change. + */ + switch (state->Vcc) { + default: + case 0: pa_dwr_set = 0; break; + case 33: pa_dwr_set = GPIO_A1|GPIO_A2; break; + case 50: pa_dwr_set = GPIO_A0|GPIO_A3; break; + } + + ret = sa1111_pcmcia_configure_socket(skt, state); + if (ret == 0) { + unsigned long flags; + + local_irq_save(flags); + NCR_0 = (NCR_0 & ~ncr_mask) | ncr_set; + + local_irq_restore(flags); + sa1111_set_io(s->dev, pa_dwr_mask, pa_dwr_set); + } + + return ret; +} + +static struct pcmcia_low_level neponset_pcmcia_ops = { + .owner = THIS_MODULE, + .configure_socket = neponset_pcmcia_configure_socket, + .first = 0, + .nr = 2, +}; + +int pcmcia_neponset_init(struct sa1111_dev *sadev) +{ + int ret = -ENODEV; + + if (machine_is_assabet()) { + /* + * Set GPIO_A<3:0> to be outputs for the MAX1600, + * and switch to standby mode. + */ + sa1111_set_io_dir(sadev, GPIO_A0|GPIO_A1|GPIO_A2|GPIO_A3, 0, 0); + sa1111_set_io(sadev, GPIO_A0|GPIO_A1|GPIO_A2|GPIO_A3, 0); + sa1111_set_sleep_io(sadev, GPIO_A0|GPIO_A1|GPIO_A2|GPIO_A3, 0); + sa11xx_drv_pcmcia_ops(&neponset_pcmcia_ops); + ret = sa1111_pcmcia_add(sadev, &neponset_pcmcia_ops, + sa11xx_drv_pcmcia_add_one); + } + + return ret; +} -- cgit v1.2.3-70-g09d2