From 90e7d52627960e751da4fb2076ce79c51da82163 Mon Sep 17 00:00:00 2001 From: Keerthy Date: Thu, 6 Feb 2014 11:20:13 +0530 Subject: regulator: tps65218: Add Regulator driver for TPS65218 PMIC This patch adds support for TPS65218 PMIC regulators. The regulators set consists of 6 DCDCs and 1 LDO. The output voltages are configurable and are meant to supply power to the main processor and other components. Signed-off-by: Keerthy Signed-off-by: Mark Brown --- drivers/regulator/Kconfig | 9 +++++++++ 1 file changed, 9 insertions(+) (limited to 'drivers/regulator/Kconfig') diff --git a/drivers/regulator/Kconfig b/drivers/regulator/Kconfig index 6a7932822e3..b05da8803bd 100644 --- a/drivers/regulator/Kconfig +++ b/drivers/regulator/Kconfig @@ -513,6 +513,15 @@ config REGULATOR_TPS65217 voltage regulators. It supports software based voltage control for different voltage domains +config REGULATOR_TPS65218 + tristate "TI TPS65218 Power regulators" + depends on MFD_TPS65218 + help + This driver supports TPS65218 voltage regulator chips. TPS65218 + provides six step-down converters and one general-purpose LDO + voltage regulators. It supports software based voltage control + for different voltage domains + config REGULATOR_TPS6524X tristate "TI TPS6524X Power regulators" depends on SPI -- cgit v1.2.3-70-g09d2 From 948838a10ad24afea3229957b6f02f8587a569e0 Mon Sep 17 00:00:00 2001 From: Axel Lin Date: Wed, 19 Feb 2014 16:35:03 +0800 Subject: regulator: tps65218: Add OF dependency This is a DT-only driver, so make it depend on OF and remove of_match_ptr in the code. Signed-off-by: Axel Lin Acked-by: Keerthy Signed-off-by: Mark Brown --- drivers/regulator/Kconfig | 2 +- drivers/regulator/tps65218-regulator.c | 14 ++++++-------- 2 files changed, 7 insertions(+), 9 deletions(-) (limited to 'drivers/regulator/Kconfig') diff --git a/drivers/regulator/Kconfig b/drivers/regulator/Kconfig index b05da8803bd..b7c95e8d8a0 100644 --- a/drivers/regulator/Kconfig +++ b/drivers/regulator/Kconfig @@ -515,7 +515,7 @@ config REGULATOR_TPS65217 config REGULATOR_TPS65218 tristate "TI TPS65218 Power regulators" - depends on MFD_TPS65218 + depends on MFD_TPS65218 && OF help This driver supports TPS65218 voltage regulator chips. TPS65218 provides six step-down converters and one general-purpose LDO diff --git a/drivers/regulator/tps65218-regulator.c b/drivers/regulator/tps65218-regulator.c index 1fb1db551ec..cec72fa71d1 100644 --- a/drivers/regulator/tps65218-regulator.c +++ b/drivers/regulator/tps65218-regulator.c @@ -243,14 +243,12 @@ static int tps65218_regulator_probe(struct platform_device *pdev) int id; match = of_match_device(tps65218_of_match, &pdev->dev); - if (match) { - template = match->data; - id = template->id; - init_data = of_get_regulator_init_data(&pdev->dev, - pdev->dev.of_node); - } else { + if (!match) return -ENODEV; - } + + template = match->data; + id = template->id; + init_data = of_get_regulator_init_data(&pdev->dev, pdev->dev.of_node); platform_set_drvdata(pdev, tps); @@ -274,7 +272,7 @@ static struct platform_driver tps65218_regulator_driver = { .driver = { .name = "tps65218-pmic", .owner = THIS_MODULE, - .of_match_table = of_match_ptr(tps65218_of_match), + .of_match_table = tps65218_of_match, }, .probe = tps65218_regulator_probe, }; -- cgit v1.2.3-70-g09d2 From 11469e0bb1c5eedd3b489a4b19dbd26c02577674 Mon Sep 17 00:00:00 2001 From: Balaji T K Date: Wed, 19 Feb 2014 20:26:40 +0530 Subject: regulator: add pbias regulator support pbias register controls internal power supply to sd card i/o pads in most OMAPs (OMAP2-5, DRA7). Control bits for selecting voltage level and enabling/disabling are in the same PBIAS register. Signed-off-by: Balaji T K Acked-by: Tony Lindgren Acked-by: Mark Brown Tested-by: Florian Vaussard Tested-by: Stefan Roese Signed-off-by: Chris Ball --- .../bindings/regulator/pbias-regulator.txt | 27 +++ drivers/regulator/Kconfig | 9 + drivers/regulator/Makefile | 1 + drivers/regulator/pbias-regulator.c | 255 +++++++++++++++++++++ 4 files changed, 292 insertions(+) create mode 100644 Documentation/devicetree/bindings/regulator/pbias-regulator.txt create mode 100644 drivers/regulator/pbias-regulator.c (limited to 'drivers/regulator/Kconfig') diff --git a/Documentation/devicetree/bindings/regulator/pbias-regulator.txt b/Documentation/devicetree/bindings/regulator/pbias-regulator.txt new file mode 100644 index 00000000000..32aa26f1e43 --- /dev/null +++ b/Documentation/devicetree/bindings/regulator/pbias-regulator.txt @@ -0,0 +1,27 @@ +PBIAS internal regulator for SD card dual voltage i/o pads on OMAP SoCs. + +Required properties: +- compatible: + - "ti,pbias-omap" for OMAP2, OMAP3, OMAP4, OMAP5, DRA7. +- reg: pbias register offset from syscon base and size of pbias register. +- syscon : phandle of the system control module +- regulator-name : should be + pbias_mmc_omap2430 for OMAP2430, OMAP3 SoCs + pbias_sim_omap3 for OMAP3 SoCs + pbias_mmc_omap4 for OMAP4 SoCs + pbias_mmc_omap5 for OMAP5 and DRA7 SoC + +Optional properties: +- Any optional property defined in bindings/regulator/regulator.txt + +Example: + + pbias_regulator: pbias_regulator { + compatible = "ti,pbias-omap"; + reg = <0 0x4>; + syscon = <&omap5_padconf_global>; + pbias_mmc_reg: pbias_mmc_omap5 { + regulator-name = "pbias_mmc_omap5"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3000000>; + }; diff --git a/drivers/regulator/Kconfig b/drivers/regulator/Kconfig index 6a7932822e3..58f08d1d24e 100644 --- a/drivers/regulator/Kconfig +++ b/drivers/regulator/Kconfig @@ -384,6 +384,15 @@ config REGULATOR_PALMAS on the muxing. This is handled automatically in the driver by reading the mux info from OTP. +config REGULATOR_PBIAS + tristate "PBIAS OMAP regulator driver" + depends on (ARCH_OMAP || COMPILE_TEST) && MFD_SYSCON + help + Say y here to support pbias regulator for mmc1:SD card i/o + on OMAP SoCs. + This driver provides support for OMAP pbias modelled + regulators. + config REGULATOR_PCAP tristate "Motorola PCAP2 regulator driver" depends on EZX_PCAP diff --git a/drivers/regulator/Makefile b/drivers/regulator/Makefile index 979f9ddcf25..001712ebbf2 100644 --- a/drivers/regulator/Makefile +++ b/drivers/regulator/Makefile @@ -54,6 +54,7 @@ obj-$(CONFIG_REGULATOR_MC13XXX_CORE) += mc13xxx-regulator-core.o obj-$(CONFIG_REGULATOR_PALMAS) += palmas-regulator.o obj-$(CONFIG_REGULATOR_PFUZE100) += pfuze100-regulator.o obj-$(CONFIG_REGULATOR_TPS51632) += tps51632-regulator.o +obj-$(CONFIG_REGULATOR_PBIAS) += pbias-regulator.o obj-$(CONFIG_REGULATOR_PCAP) += pcap-regulator.o obj-$(CONFIG_REGULATOR_PCF50633) += pcf50633-regulator.o obj-$(CONFIG_REGULATOR_RC5T583) += rc5t583-regulator.o diff --git a/drivers/regulator/pbias-regulator.c b/drivers/regulator/pbias-regulator.c new file mode 100644 index 00000000000..ded3b357420 --- /dev/null +++ b/drivers/regulator/pbias-regulator.c @@ -0,0 +1,255 @@ +/* + * pbias-regulator.c + * + * Copyright (C) 2014 Texas Instruments Incorporated - http://www.ti.com/ + * Author: Balaji T K + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation version 2. + * + * This program is distributed "as is" WITHOUT ANY WARRANTY of any + * kind, whether express or implied; without even the implied warranty + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +struct pbias_reg_info { + u32 enable; + u32 enable_mask; + u32 vmode; + unsigned int enable_time; + char *name; +}; + +struct pbias_regulator_data { + struct regulator_desc desc; + void __iomem *pbias_addr; + unsigned int pbias_reg; + struct regulator_dev *dev; + struct regmap *syscon; + const struct pbias_reg_info *info; + int voltage; +}; + +static int pbias_regulator_set_voltage(struct regulator_dev *dev, + int min_uV, int max_uV, unsigned *selector) +{ + struct pbias_regulator_data *data = rdev_get_drvdata(dev); + const struct pbias_reg_info *info = data->info; + int ret, vmode; + + if (min_uV <= 1800000) + vmode = 0; + else if (min_uV > 1800000) + vmode = info->vmode; + + ret = regmap_update_bits(data->syscon, data->pbias_reg, + info->vmode, vmode); + + return ret; +} + +static int pbias_regulator_get_voltage(struct regulator_dev *rdev) +{ + struct pbias_regulator_data *data = rdev_get_drvdata(rdev); + const struct pbias_reg_info *info = data->info; + int value, voltage; + + regmap_read(data->syscon, data->pbias_reg, &value); + value &= info->vmode; + + voltage = value ? 3000000 : 1800000; + + return voltage; +} + +static int pbias_regulator_enable(struct regulator_dev *rdev) +{ + struct pbias_regulator_data *data = rdev_get_drvdata(rdev); + const struct pbias_reg_info *info = data->info; + int ret; + + ret = regmap_update_bits(data->syscon, data->pbias_reg, + info->enable_mask, info->enable); + + return ret; +} + +static int pbias_regulator_disable(struct regulator_dev *rdev) +{ + struct pbias_regulator_data *data = rdev_get_drvdata(rdev); + const struct pbias_reg_info *info = data->info; + int ret; + + ret = regmap_update_bits(data->syscon, data->pbias_reg, + info->enable_mask, 0); + return ret; +} + +static int pbias_regulator_is_enable(struct regulator_dev *rdev) +{ + struct pbias_regulator_data *data = rdev_get_drvdata(rdev); + const struct pbias_reg_info *info = data->info; + int value; + + regmap_read(data->syscon, data->pbias_reg, &value); + + return (value & info->enable_mask) == info->enable_mask; +} + +static struct regulator_ops pbias_regulator_voltage_ops = { + .set_voltage = pbias_regulator_set_voltage, + .get_voltage = pbias_regulator_get_voltage, + .enable = pbias_regulator_enable, + .disable = pbias_regulator_disable, + .is_enabled = pbias_regulator_is_enable, +}; + +static const struct pbias_reg_info pbias_mmc_omap2430 = { + .enable = BIT(1), + .enable_mask = BIT(1), + .vmode = BIT(0), + .enable_time = 100, + .name = "pbias_mmc_omap2430" +}; + +static const struct pbias_reg_info pbias_sim_omap3 = { + .enable = BIT(9), + .enable_mask = BIT(9), + .vmode = BIT(8), + .enable_time = 100, + .name = "pbias_sim_omap3" +}; + +static const struct pbias_reg_info pbias_mmc_omap4 = { + .enable = BIT(26) | BIT(22), + .enable_mask = BIT(26) | BIT(25) | BIT(22), + .vmode = BIT(21), + .enable_time = 100, + .name = "pbias_mmc_omap4" +}; + +static const struct pbias_reg_info pbias_mmc_omap5 = { + .enable = BIT(27) | BIT(26), + .enable_mask = BIT(27) | BIT(25) | BIT(26), + .vmode = BIT(21), + .enable_time = 100, + .name = "pbias_mmc_omap5" +}; + +static struct of_regulator_match pbias_matches[] = { + { .name = "pbias_mmc_omap2430", .driver_data = (void *)&pbias_mmc_omap2430}, + { .name = "pbias_sim_omap3", .driver_data = (void *)&pbias_sim_omap3}, + { .name = "pbias_mmc_omap4", .driver_data = (void *)&pbias_mmc_omap4}, + { .name = "pbias_mmc_omap5", .driver_data = (void *)&pbias_mmc_omap5}, +}; +#define PBIAS_NUM_REGS ARRAY_SIZE(pbias_matches) + +static const struct of_device_id pbias_of_match[] = { + { .compatible = "ti,pbias-omap", }, + {}, +}; +MODULE_DEVICE_TABLE(of, pbias_of_match); + +static int pbias_regulator_probe(struct platform_device *pdev) +{ + struct device_node *np = pdev->dev.of_node; + struct pbias_regulator_data *drvdata; + struct resource *res; + struct regulator_config cfg = { }; + struct regmap *syscon; + const struct pbias_reg_info *info; + int ret = 0; + int count, idx, data_idx = 0; + + count = of_regulator_match(&pdev->dev, np, pbias_matches, + PBIAS_NUM_REGS); + if (count < 0) + return count; + + drvdata = devm_kzalloc(&pdev->dev, sizeof(struct pbias_regulator_data) + * count, GFP_KERNEL); + if (drvdata == NULL) { + dev_err(&pdev->dev, "Failed to allocate device data\n"); + return -ENOMEM; + } + + syscon = syscon_regmap_lookup_by_phandle(np, "syscon"); + if (IS_ERR(syscon)) + return PTR_ERR(syscon); + + cfg.dev = &pdev->dev; + + for (idx = 0; idx < PBIAS_NUM_REGS && data_idx < count; idx++) { + if (!pbias_matches[idx].init_data || + !pbias_matches[idx].of_node) + continue; + + info = pbias_matches[idx].driver_data; + if (!info) + return -ENODEV; + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!res) + return -EINVAL; + + drvdata[data_idx].pbias_reg = res->start; + drvdata[data_idx].syscon = syscon; + drvdata[data_idx].info = info; + drvdata[data_idx].desc.name = info->name; + drvdata[data_idx].desc.owner = THIS_MODULE; + drvdata[data_idx].desc.type = REGULATOR_VOLTAGE; + drvdata[data_idx].desc.ops = &pbias_regulator_voltage_ops; + drvdata[data_idx].desc.n_voltages = 2; + drvdata[data_idx].desc.enable_time = info->enable_time; + + cfg.init_data = pbias_matches[idx].init_data; + cfg.driver_data = &drvdata[data_idx]; + cfg.of_node = pbias_matches[idx].of_node; + + drvdata[data_idx].dev = devm_regulator_register(&pdev->dev, + &drvdata[data_idx].desc, &cfg); + if (IS_ERR(drvdata[data_idx].dev)) { + ret = PTR_ERR(drvdata[data_idx].dev); + dev_err(&pdev->dev, + "Failed to register regulator: %d\n", ret); + goto err_regulator; + } + data_idx++; + } + + platform_set_drvdata(pdev, drvdata); + +err_regulator: + return ret; +} + +static struct platform_driver pbias_regulator_driver = { + .probe = pbias_regulator_probe, + .driver = { + .name = "pbias-regulator", + .owner = THIS_MODULE, + .of_match_table = of_match_ptr(pbias_of_match), + }, +}; + +module_platform_driver(pbias_regulator_driver); + +MODULE_AUTHOR("Balaji T K "); +MODULE_DESCRIPTION("pbias voltage regulator"); +MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:pbias-regulator"); -- cgit v1.2.3-70-g09d2 From 2cee2121db44cfeee206d0854bedd52344eea444 Mon Sep 17 00:00:00 2001 From: Axel Lin Date: Wed, 5 Mar 2014 18:02:43 +0800 Subject: regulator: pfuze100: Add PFUZE200 support to Kconfig and module description Signed-off-by: Axel Lin Acked-by: Robin Gong Signed-off-by: Mark Brown --- drivers/regulator/Kconfig | 6 +++--- drivers/regulator/pfuze100-regulator.c | 2 +- 2 files changed, 4 insertions(+), 4 deletions(-) (limited to 'drivers/regulator/Kconfig') diff --git a/drivers/regulator/Kconfig b/drivers/regulator/Kconfig index 6a7932822e3..a048d626843 100644 --- a/drivers/regulator/Kconfig +++ b/drivers/regulator/Kconfig @@ -399,12 +399,12 @@ config REGULATOR_PCF50633 on PCF50633 config REGULATOR_PFUZE100 - tristate "Freescale PFUZE100 regulator driver" + tristate "Freescale PFUZE100/PFUZE200 regulator driver" depends on I2C select REGMAP_I2C help - Say y here to support the regulators found on the Freescale PFUZE100 - PMIC. + Say y here to support the regulators found on the Freescale + PFUZE100/PFUZE200 PMIC. config REGULATOR_RC5T583 tristate "RICOH RC5T583 Power regulators" diff --git a/drivers/regulator/pfuze100-regulator.c b/drivers/regulator/pfuze100-regulator.c index f81c5bffbbf..bcdb5153f30 100644 --- a/drivers/regulator/pfuze100-regulator.c +++ b/drivers/regulator/pfuze100-regulator.c @@ -527,6 +527,6 @@ static struct i2c_driver pfuze_driver = { module_i2c_driver(pfuze_driver); MODULE_AUTHOR("Robin Gong "); -MODULE_DESCRIPTION("Regulator Driver for Freescale PFUZE100 PMIC"); +MODULE_DESCRIPTION("Regulator Driver for Freescale PFUZE100/PFUZE200 PMIC"); MODULE_LICENSE("GPL v2"); MODULE_ALIAS("i2c:pfuze100-regulator"); -- cgit v1.2.3-70-g09d2 From 462c9fc5cb1daa30ebcb50d3a5341af3e0941a42 Mon Sep 17 00:00:00 2001 From: Matt Porter Date: Tue, 11 Mar 2014 11:46:13 -0400 Subject: regulator: add bcm590xx regulator driver Add a regulator driver for the BCM590xx PMU voltage regulators. The driver supports LDOs and DCDCs in normal mode only. There is no support for low-power mode or power sequencing. Signed-off-by: Matt Porter Reviewed-by: Tim Kryger Reviewed-by: Markus Mayer Signed-off-by: Mark Brown --- drivers/regulator/Kconfig | 8 + drivers/regulator/Makefile | 1 + drivers/regulator/bcm590xx-regulator.c | 413 +++++++++++++++++++++++++++++++++ 3 files changed, 422 insertions(+) create mode 100644 drivers/regulator/bcm590xx-regulator.c (limited to 'drivers/regulator/Kconfig') diff --git a/drivers/regulator/Kconfig b/drivers/regulator/Kconfig index 6a7932822e3..1169a42519d 100644 --- a/drivers/regulator/Kconfig +++ b/drivers/regulator/Kconfig @@ -139,6 +139,14 @@ config REGULATOR_AS3722 AS3722 PMIC. This will enable support for all the software controllable DCDC/LDO regulators. +config REGULATOR_BCM590XX + tristate "Broadcom BCM590xx PMU Regulators" + depends on MFD_BCM590XX + help + This driver provides support for the voltage regulators on the + BCM590xx PMUs. This will enable support for the software + controllable LDO/Switching regulators. + config REGULATOR_DA903X tristate "Dialog Semiconductor DA9030/DA9034 regulators" depends on PMIC_DA903X diff --git a/drivers/regulator/Makefile b/drivers/regulator/Makefile index 979f9ddcf25..e1ab514f03c 100644 --- a/drivers/regulator/Makefile +++ b/drivers/regulator/Makefile @@ -20,6 +20,7 @@ obj-$(CONFIG_REGULATOR_ANATOP) += anatop-regulator.o obj-$(CONFIG_REGULATOR_ARIZONA) += arizona-micsupp.o arizona-ldo1.o obj-$(CONFIG_REGULATOR_AS3711) += as3711-regulator.o obj-$(CONFIG_REGULATOR_AS3722) += as3722-regulator.o +obj-$(CONFIG_REGULATOR_BCM590XX) += bcm590xx-regulator.o obj-$(CONFIG_REGULATOR_DA903X) += da903x.o obj-$(CONFIG_REGULATOR_DA9052) += da9052-regulator.o obj-$(CONFIG_REGULATOR_DA9055) += da9055-regulator.o diff --git a/drivers/regulator/bcm590xx-regulator.c b/drivers/regulator/bcm590xx-regulator.c new file mode 100644 index 00000000000..e6b2e8e08c4 --- /dev/null +++ b/drivers/regulator/bcm590xx-regulator.c @@ -0,0 +1,413 @@ +/* + * Broadcom BCM590xx regulator driver + * + * Copyright 2014 Linaro Limited + * Author: Matt Porter + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +/* Register defs */ +#define BCM590XX_RFLDOPMCTRL1 0x60 +#define BCM590XX_IOSR1PMCTRL1 0x7a +#define BCM590XX_IOSR2PMCTRL1 0x7c +#define BCM590XX_CSRPMCTRL1 0x7e +#define BCM590XX_SDSR1PMCTRL1 0x82 +#define BCM590XX_SDSR2PMCTRL1 0x86 +#define BCM590XX_MSRPMCTRL1 0x8a +#define BCM590XX_VSRPMCTRL1 0x8e +#define BCM590XX_REG_ENABLE BIT(7) + +#define BCM590XX_RFLDOCTRL 0x96 +#define BCM590XX_CSRVOUT1 0xc0 +#define BCM590XX_LDO_VSEL_MASK GENMASK(5, 3) +#define BCM590XX_SR_VSEL_MASK GENMASK(5, 0) + +/* LDO regulator IDs */ +#define BCM590XX_REG_RFLDO 0 +#define BCM590XX_REG_CAMLDO1 1 +#define BCM590XX_REG_CAMLDO2 2 +#define BCM590XX_REG_SIMLDO1 3 +#define BCM590XX_REG_SIMLDO2 4 +#define BCM590XX_REG_SDLDO 5 +#define BCM590XX_REG_SDXLDO 6 +#define BCM590XX_REG_MMCLDO1 7 +#define BCM590XX_REG_MMCLDO2 8 +#define BCM590XX_REG_AUDLDO 9 +#define BCM590XX_REG_MICLDO 10 +#define BCM590XX_REG_USBLDO 11 +#define BCM590XX_REG_VIBLDO 12 + +/* DCDC regulator IDs */ +#define BCM590XX_REG_CSR 13 +#define BCM590XX_REG_IOSR1 14 +#define BCM590XX_REG_IOSR2 15 +#define BCM590XX_REG_MSR 16 +#define BCM590XX_REG_SDSR1 17 +#define BCM590XX_REG_SDSR2 18 +#define BCM590XX_REG_VSR 19 + +#define BCM590XX_NUM_REGS 20 + +#define BCM590XX_REG_IS_LDO(n) (n < BCM590XX_REG_CSR) + +struct bcm590xx_board { + struct regulator_init_data *bcm590xx_pmu_init_data[BCM590XX_NUM_REGS]; +}; + +/* LDO group A: supported voltages in microvolts */ +static const unsigned int ldo_a_table[] = { + 1200000, 1800000, 2500000, 2700000, 2800000, + 2900000, 3000000, 3300000, +}; + +/* LDO group C: supported voltages in microvolts */ +static const unsigned int ldo_c_table[] = { + 3100000, 1800000, 2500000, 2700000, 2800000, + 2900000, 3000000, 3300000, +}; + +/* DCDC group CSR: supported voltages in microvolts */ +static const struct regulator_linear_range dcdc_csr_ranges[] = { + REGULATOR_LINEAR_RANGE(860000, 2, 50, 10000), + REGULATOR_LINEAR_RANGE(1360000, 51, 55, 20000), + REGULATOR_LINEAR_RANGE(900000, 56, 63, 0), +}; + +/* DCDC group IOSR1: supported voltages in microvolts */ +static const struct regulator_linear_range dcdc_iosr1_ranges[] = { + REGULATOR_LINEAR_RANGE(860000, 2, 51, 10000), + REGULATOR_LINEAR_RANGE(1500000, 52, 52, 0), + REGULATOR_LINEAR_RANGE(1800000, 53, 53, 0), + REGULATOR_LINEAR_RANGE(900000, 54, 63, 0), +}; + +/* DCDC group SDSR1: supported voltages in microvolts */ +static const struct regulator_linear_range dcdc_sdsr1_ranges[] = { + REGULATOR_LINEAR_RANGE(860000, 2, 50, 10000), + REGULATOR_LINEAR_RANGE(1340000, 51, 51, 0), + REGULATOR_LINEAR_RANGE(900000, 52, 63, 0), +}; + +struct bcm590xx_info { + const char *name; + const char *vin_name; + u8 n_voltages; + const unsigned int *volt_table; + u8 n_linear_ranges; + const struct regulator_linear_range *linear_ranges; +}; + +#define BCM590XX_REG_TABLE(_name, _table) \ + { \ + .name = #_name, \ + .n_voltages = ARRAY_SIZE(_table), \ + .volt_table = _table, \ + } + +#define BCM590XX_REG_RANGES(_name, _ranges) \ + { \ + .name = #_name, \ + .n_linear_ranges = ARRAY_SIZE(_ranges), \ + .linear_ranges = _ranges, \ + } + +static struct bcm590xx_info bcm590xx_regs[] = { + BCM590XX_REG_TABLE(rfldo, ldo_a_table), + BCM590XX_REG_TABLE(camldo1, ldo_c_table), + BCM590XX_REG_TABLE(camldo2, ldo_c_table), + BCM590XX_REG_TABLE(simldo1, ldo_a_table), + BCM590XX_REG_TABLE(simldo2, ldo_a_table), + BCM590XX_REG_TABLE(sdldo, ldo_c_table), + BCM590XX_REG_TABLE(sdxldo, ldo_a_table), + BCM590XX_REG_TABLE(mmcldo1, ldo_a_table), + BCM590XX_REG_TABLE(mmcldo2, ldo_a_table), + BCM590XX_REG_TABLE(audldo, ldo_a_table), + BCM590XX_REG_TABLE(micldo, ldo_a_table), + BCM590XX_REG_TABLE(usbldo, ldo_a_table), + BCM590XX_REG_TABLE(vibldo, ldo_c_table), + BCM590XX_REG_RANGES(csr, dcdc_csr_ranges), + BCM590XX_REG_RANGES(iosr1, dcdc_iosr1_ranges), + BCM590XX_REG_RANGES(iosr2, dcdc_iosr1_ranges), + BCM590XX_REG_RANGES(msr, dcdc_iosr1_ranges), + BCM590XX_REG_RANGES(sdsr1, dcdc_sdsr1_ranges), + BCM590XX_REG_RANGES(sdsr2, dcdc_iosr1_ranges), + BCM590XX_REG_RANGES(vsr, dcdc_iosr1_ranges), +}; + +struct bcm590xx_reg { + struct regulator_desc *desc; + struct bcm590xx *mfd; + struct regulator_dev **rdev; + struct bcm590xx_info **info; +}; + +static int bcm590xx_get_vsel_register(int id) +{ + if (BCM590XX_REG_IS_LDO(id)) + return BCM590XX_RFLDOCTRL + id; + else + return BCM590XX_CSRVOUT1 + (id - BCM590XX_REG_CSR) * 3; +} + +static int bcm590xx_get_enable_register(int id) +{ + int reg = 0; + + if (BCM590XX_REG_IS_LDO(id)) + reg = BCM590XX_RFLDOPMCTRL1 + id * 2; + else + switch (id) { + case BCM590XX_REG_CSR: + reg = BCM590XX_CSRPMCTRL1; + break; + case BCM590XX_REG_IOSR1: + reg = BCM590XX_IOSR1PMCTRL1; + break; + case BCM590XX_REG_IOSR2: + reg = BCM590XX_IOSR2PMCTRL1; + break; + case BCM590XX_REG_MSR: + reg = BCM590XX_MSRPMCTRL1; + break; + case BCM590XX_REG_SDSR1: + reg = BCM590XX_SDSR1PMCTRL1; + break; + case BCM590XX_REG_SDSR2: + reg = BCM590XX_SDSR2PMCTRL1; + break; + }; + + return reg; +} + +static struct regulator_ops bcm590xx_ops_ldo = { + .is_enabled = regulator_is_enabled_regmap, + .enable = regulator_enable_regmap, + .disable = regulator_disable_regmap, + .get_voltage_sel = regulator_get_voltage_sel_regmap, + .set_voltage_sel = regulator_set_voltage_sel_regmap, + .list_voltage = regulator_list_voltage_table, + .map_voltage = regulator_map_voltage_iterate, +}; + +static struct regulator_ops bcm590xx_ops_dcdc = { + .is_enabled = regulator_is_enabled_regmap, + .enable = regulator_enable_regmap, + .disable = regulator_disable_regmap, + .get_voltage_sel = regulator_get_voltage_sel_regmap, + .set_voltage_sel = regulator_set_voltage_sel_regmap, + .list_voltage = regulator_list_voltage_linear_range, + .map_voltage = regulator_map_voltage_linear_range, +}; + +#define BCM590XX_MATCH(_name, _id) \ + { \ + .name = #_name, \ + .driver_data = (void *)&bcm590xx_regs[BCM590XX_REG_##_id], \ + } + +static struct of_regulator_match bcm590xx_matches[] = { + BCM590XX_MATCH(rfldo, RFLDO), + BCM590XX_MATCH(camldo1, CAMLDO1), + BCM590XX_MATCH(camldo2, CAMLDO2), + BCM590XX_MATCH(simldo1, SIMLDO1), + BCM590XX_MATCH(simldo2, SIMLDO2), + BCM590XX_MATCH(sdldo, SDLDO), + BCM590XX_MATCH(sdxldo, SDXLDO), + BCM590XX_MATCH(mmcldo1, MMCLDO1), + BCM590XX_MATCH(mmcldo2, MMCLDO2), + BCM590XX_MATCH(audldo, AUDLDO), + BCM590XX_MATCH(micldo, MICLDO), + BCM590XX_MATCH(usbldo, USBLDO), + BCM590XX_MATCH(vibldo, VIBLDO), + BCM590XX_MATCH(csr, CSR), + BCM590XX_MATCH(iosr1, IOSR1), + BCM590XX_MATCH(iosr2, IOSR2), + BCM590XX_MATCH(msr, MSR), + BCM590XX_MATCH(sdsr1, SDSR1), + BCM590XX_MATCH(sdsr2, SDSR2), + BCM590XX_MATCH(vsr, VSR), +}; + +static struct bcm590xx_board *bcm590xx_parse_dt_reg_data( + struct platform_device *pdev, + struct of_regulator_match **bcm590xx_reg_matches) +{ + struct bcm590xx_board *data; + struct device_node *np = pdev->dev.parent->of_node; + struct device_node *regulators; + struct of_regulator_match *matches = bcm590xx_matches; + int count = ARRAY_SIZE(bcm590xx_matches); + int idx = 0; + int ret; + + if (!np) { + dev_err(&pdev->dev, "of node not found\n"); + return NULL; + } + + data = devm_kzalloc(&pdev->dev, sizeof(*data), GFP_KERNEL); + if (!data) { + dev_err(&pdev->dev, "failed to allocate regulator board data\n"); + return NULL; + } + + np = of_node_get(np); + regulators = of_get_child_by_name(np, "regulators"); + if (!regulators) { + dev_warn(&pdev->dev, "regulator node not found\n"); + return NULL; + } + + ret = of_regulator_match(&pdev->dev, regulators, matches, count); + of_node_put(regulators); + if (ret < 0) { + dev_err(&pdev->dev, "Error parsing regulator init data: %d\n", + ret); + return NULL; + } + + *bcm590xx_reg_matches = matches; + + for (idx = 0; idx < count; idx++) { + if (!matches[idx].init_data || !matches[idx].of_node) + continue; + + data->bcm590xx_pmu_init_data[idx] = matches[idx].init_data; + } + + return data; +} + +static int bcm590xx_probe(struct platform_device *pdev) +{ + struct bcm590xx *bcm590xx = dev_get_drvdata(pdev->dev.parent); + struct bcm590xx_board *pmu_data = NULL; + struct bcm590xx_reg *pmu; + struct regulator_config config = { }; + struct bcm590xx_info *info; + struct regulator_init_data *reg_data; + struct regulator_dev *rdev; + struct of_regulator_match *bcm590xx_reg_matches = NULL; + int i; + + pmu_data = bcm590xx_parse_dt_reg_data(pdev, + &bcm590xx_reg_matches); + + pmu = devm_kzalloc(&pdev->dev, sizeof(*pmu), GFP_KERNEL); + if (!pmu) { + dev_err(&pdev->dev, "Memory allocation failed for pmu\n"); + return -ENOMEM; + } + + pmu->mfd = bcm590xx; + + platform_set_drvdata(pdev, pmu); + + pmu->desc = devm_kzalloc(&pdev->dev, BCM590XX_NUM_REGS * + sizeof(struct regulator_desc), GFP_KERNEL); + if (!pmu->desc) { + dev_err(&pdev->dev, "Memory alloc fails for desc\n"); + return -ENOMEM; + } + + pmu->info = devm_kzalloc(&pdev->dev, BCM590XX_NUM_REGS * + sizeof(struct bcm590xx_info *), GFP_KERNEL); + if (!pmu->info) { + dev_err(&pdev->dev, "Memory alloc fails for info\n"); + return -ENOMEM; + } + + pmu->rdev = devm_kzalloc(&pdev->dev, BCM590XX_NUM_REGS * + sizeof(struct regulator_dev *), GFP_KERNEL); + if (!pmu->rdev) { + dev_err(&pdev->dev, "Memory alloc fails for rdev\n"); + return -ENOMEM; + } + + info = bcm590xx_regs; + + for (i = 0; i < BCM590XX_NUM_REGS; i++, info++) { + if (pmu_data) + reg_data = pmu_data->bcm590xx_pmu_init_data[i]; + else + reg_data = NULL; + + /* Register the regulators */ + pmu->info[i] = info; + + pmu->desc[i].name = info->name; + pmu->desc[i].supply_name = info->vin_name; + pmu->desc[i].id = i; + pmu->desc[i].volt_table = info->volt_table; + pmu->desc[i].n_voltages = info->n_voltages; + pmu->desc[i].linear_ranges = info->linear_ranges; + pmu->desc[i].n_linear_ranges = info->n_linear_ranges; + + if (BCM590XX_REG_IS_LDO(i)) { + pmu->desc[i].ops = &bcm590xx_ops_ldo; + pmu->desc[i].vsel_mask = BCM590XX_LDO_VSEL_MASK; + } else { + pmu->desc[i].ops = &bcm590xx_ops_dcdc; + pmu->desc[i].vsel_mask = BCM590XX_SR_VSEL_MASK; + } + + pmu->desc[i].vsel_reg = bcm590xx_get_vsel_register(i); + pmu->desc[i].enable_is_inverted = true; + pmu->desc[i].enable_mask = BCM590XX_REG_ENABLE; + pmu->desc[i].enable_reg = bcm590xx_get_enable_register(i); + pmu->desc[i].type = REGULATOR_VOLTAGE; + pmu->desc[i].owner = THIS_MODULE; + + config.dev = bcm590xx->dev; + config.init_data = reg_data; + config.driver_data = pmu; + config.regmap = bcm590xx->regmap; + + if (bcm590xx_reg_matches) + config.of_node = bcm590xx_reg_matches[i].of_node; + + rdev = devm_regulator_register(&pdev->dev, &pmu->desc[i], + &config); + if (IS_ERR(rdev)) { + dev_err(bcm590xx->dev, + "failed to register %s regulator\n", + pdev->name); + return PTR_ERR(rdev); + } + + pmu->rdev[i] = rdev; + } + + return 0; +} + +static struct platform_driver bcm590xx_regulator_driver = { + .driver = { + .name = "bcm590xx-vregs", + .owner = THIS_MODULE, + }, + .probe = bcm590xx_probe, +}; +module_platform_driver(bcm590xx_regulator_driver); + +MODULE_AUTHOR("Matt Porter "); +MODULE_DESCRIPTION("BCM590xx voltage regulator driver"); +MODULE_LICENSE("GPL v2"); +MODULE_ALIAS("platform:bcm590xx-regulator"); -- cgit v1.2.3-70-g09d2 From f18792714608a670c2762d22f695d77d02fc965e Mon Sep 17 00:00:00 2001 From: Sachin Kamat Date: Fri, 14 Mar 2014 17:21:58 +0530 Subject: regulator: Add support for S2MPA01 regulator Add support for S2MPA01 voltage and current regulator. Signed-off-by: Sachin Kamat Acked-by: Mark Brown Signed-off-by: Lee Jones --- drivers/regulator/Kconfig | 7 + drivers/regulator/Makefile | 1 + drivers/regulator/s2mpa01.c | 481 ++++++++++++++++++++++++++++++++++++++++++++ 3 files changed, 489 insertions(+) create mode 100644 drivers/regulator/s2mpa01.c (limited to 'drivers/regulator/Kconfig') diff --git a/drivers/regulator/Kconfig b/drivers/regulator/Kconfig index 6a7932822e3..8f8e6710bb4 100644 --- a/drivers/regulator/Kconfig +++ b/drivers/regulator/Kconfig @@ -416,6 +416,13 @@ config REGULATOR_RC5T583 through regulator interface. The device supports multiple DCDC/LDO outputs which can be controlled by i2c communication. +config REGULATOR_S2MPA01 + tristate "Samsung S2MPA01 voltage regulator" + depends on MFD_SEC_CORE + help + This driver controls Samsung S2MPA01 voltage output regulator + via I2C bus. S2MPA01 has 10 Bucks and 26 LDO outputs. + config REGULATOR_S2MPS11 tristate "Samsung S2MPS11 voltage regulator" depends on MFD_SEC_CORE diff --git a/drivers/regulator/Makefile b/drivers/regulator/Makefile index 979f9ddcf25..b3ece84289c 100644 --- a/drivers/regulator/Makefile +++ b/drivers/regulator/Makefile @@ -57,6 +57,7 @@ obj-$(CONFIG_REGULATOR_TPS51632) += tps51632-regulator.o obj-$(CONFIG_REGULATOR_PCAP) += pcap-regulator.o obj-$(CONFIG_REGULATOR_PCF50633) += pcf50633-regulator.o obj-$(CONFIG_REGULATOR_RC5T583) += rc5t583-regulator.o +obj-$(CONFIG_REGULATOR_S2MPA01) += s2mpa01.o obj-$(CONFIG_REGULATOR_S2MPS11) += s2mps11.o obj-$(CONFIG_REGULATOR_S5M8767) += s5m8767.o obj-$(CONFIG_REGULATOR_STW481X_VMMC) += stw481x-vmmc.o diff --git a/drivers/regulator/s2mpa01.c b/drivers/regulator/s2mpa01.c new file mode 100644 index 00000000000..808b3aa7a42 --- /dev/null +++ b/drivers/regulator/s2mpa01.c @@ -0,0 +1,481 @@ +/* + * Copyright (c) 2013 Samsung Electronics Co., Ltd + * http://www.samsung.com + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#define S2MPA01_REGULATOR_CNT ARRAY_SIZE(regulators) + +struct s2mpa01_info { + int ramp_delay24; + int ramp_delay3; + int ramp_delay5; + int ramp_delay16; + int ramp_delay7; + int ramp_delay8910; +}; + +static int get_ramp_delay(int ramp_delay) +{ + unsigned char cnt = 0; + + ramp_delay /= 6250; + + while (true) { + ramp_delay = ramp_delay >> 1; + if (ramp_delay == 0) + break; + cnt++; + } + + if (cnt > 3) + cnt = 3; + + return cnt; +} + +static int s2mpa01_regulator_set_voltage_time_sel(struct regulator_dev *rdev, + unsigned int old_selector, + unsigned int new_selector) +{ + struct s2mpa01_info *s2mpa01 = rdev_get_drvdata(rdev); + unsigned int ramp_delay = 0; + int old_volt, new_volt; + + switch (rdev->desc->id) { + case S2MPA01_BUCK2: + case S2MPA01_BUCK4: + ramp_delay = s2mpa01->ramp_delay24; + break; + case S2MPA01_BUCK3: + ramp_delay = s2mpa01->ramp_delay3; + break; + case S2MPA01_BUCK5: + ramp_delay = s2mpa01->ramp_delay5; + break; + case S2MPA01_BUCK1: + case S2MPA01_BUCK6: + ramp_delay = s2mpa01->ramp_delay16; + break; + case S2MPA01_BUCK7: + ramp_delay = s2mpa01->ramp_delay7; + break; + case S2MPA01_BUCK8: + case S2MPA01_BUCK9: + case S2MPA01_BUCK10: + ramp_delay = s2mpa01->ramp_delay8910; + break; + } + + if (ramp_delay == 0) + ramp_delay = rdev->desc->ramp_delay; + + old_volt = rdev->desc->min_uV + (rdev->desc->uV_step * old_selector); + new_volt = rdev->desc->min_uV + (rdev->desc->uV_step * new_selector); + + return DIV_ROUND_UP(abs(new_volt - old_volt), ramp_delay); +} + +static int s2mpa01_set_ramp_delay(struct regulator_dev *rdev, int ramp_delay) +{ + struct s2mpa01_info *s2mpa01 = rdev_get_drvdata(rdev); + unsigned int ramp_val, ramp_shift, ramp_reg = S2MPA01_REG_RAMP2; + unsigned int ramp_enable = 1, enable_shift = 0; + int ret; + + switch (rdev->desc->id) { + case S2MPA01_BUCK1: + enable_shift = S2MPA01_BUCK1_RAMP_EN_SHIFT; + if (!ramp_delay) { + ramp_enable = 0; + break; + } + + if (ramp_delay > s2mpa01->ramp_delay16) + s2mpa01->ramp_delay16 = ramp_delay; + else + ramp_delay = s2mpa01->ramp_delay16; + + ramp_shift = S2MPA01_BUCK16_RAMP_SHIFT; + ramp_reg = S2MPA01_REG_RAMP1; + break; + case S2MPA01_BUCK2: + enable_shift = S2MPA01_BUCK2_RAMP_EN_SHIFT; + if (!ramp_delay) { + ramp_enable = 0; + break; + } + + if (ramp_delay > s2mpa01->ramp_delay24) + s2mpa01->ramp_delay24 = ramp_delay; + else + ramp_delay = s2mpa01->ramp_delay24; + + ramp_shift = S2MPA01_BUCK24_RAMP_SHIFT; + ramp_reg = S2MPA01_REG_RAMP1; + break; + case S2MPA01_BUCK3: + enable_shift = S2MPA01_BUCK3_RAMP_EN_SHIFT; + if (!ramp_delay) { + ramp_enable = 0; + break; + } + + s2mpa01->ramp_delay3 = ramp_delay; + ramp_shift = S2MPA01_BUCK3_RAMP_SHIFT; + ramp_reg = S2MPA01_REG_RAMP1; + break; + case S2MPA01_BUCK4: + enable_shift = S2MPA01_BUCK4_RAMP_EN_SHIFT; + if (!ramp_delay) { + ramp_enable = 0; + break; + } + + if (ramp_delay > s2mpa01->ramp_delay24) + s2mpa01->ramp_delay24 = ramp_delay; + else + ramp_delay = s2mpa01->ramp_delay24; + + ramp_shift = S2MPA01_BUCK24_RAMP_SHIFT; + ramp_reg = S2MPA01_REG_RAMP1; + break; + case S2MPA01_BUCK5: + s2mpa01->ramp_delay5 = ramp_delay; + ramp_shift = S2MPA01_BUCK5_RAMP_SHIFT; + break; + case S2MPA01_BUCK6: + if (ramp_delay > s2mpa01->ramp_delay16) + s2mpa01->ramp_delay16 = ramp_delay; + else + ramp_delay = s2mpa01->ramp_delay16; + + ramp_shift = S2MPA01_BUCK16_RAMP_SHIFT; + break; + case S2MPA01_BUCK7: + s2mpa01->ramp_delay7 = ramp_delay; + ramp_shift = S2MPA01_BUCK7_RAMP_SHIFT; + break; + case S2MPA01_BUCK8: + case S2MPA01_BUCK9: + case S2MPA01_BUCK10: + if (ramp_delay > s2mpa01->ramp_delay8910) + s2mpa01->ramp_delay8910 = ramp_delay; + else + ramp_delay = s2mpa01->ramp_delay8910; + + ramp_shift = S2MPA01_BUCK8910_RAMP_SHIFT; + break; + default: + return 0; + } + + if (!ramp_enable) + goto ramp_disable; + + if (enable_shift) { + ret = regmap_update_bits(rdev->regmap, S2MPA01_REG_RAMP1, + 1 << enable_shift, 1 << enable_shift); + if (ret) { + dev_err(&rdev->dev, "failed to enable ramp rate\n"); + return ret; + } + } + + ramp_val = get_ramp_delay(ramp_delay); + + return regmap_update_bits(rdev->regmap, ramp_reg, 0x3 << ramp_shift, + ramp_val << ramp_shift); + +ramp_disable: + return regmap_update_bits(rdev->regmap, S2MPA01_REG_RAMP1, + 1 << enable_shift, 0); +} + +static struct regulator_ops s2mpa01_ldo_ops = { + .list_voltage = regulator_list_voltage_linear, + .map_voltage = regulator_map_voltage_linear, + .is_enabled = regulator_is_enabled_regmap, + .enable = regulator_enable_regmap, + .disable = regulator_disable_regmap, + .get_voltage_sel = regulator_get_voltage_sel_regmap, + .set_voltage_sel = regulator_set_voltage_sel_regmap, + .set_voltage_time_sel = regulator_set_voltage_time_sel, +}; + +static struct regulator_ops s2mpa01_buck_ops = { + .list_voltage = regulator_list_voltage_linear, + .map_voltage = regulator_map_voltage_linear, + .is_enabled = regulator_is_enabled_regmap, + .enable = regulator_enable_regmap, + .disable = regulator_disable_regmap, + .get_voltage_sel = regulator_get_voltage_sel_regmap, + .set_voltage_sel = regulator_set_voltage_sel_regmap, + .set_voltage_time_sel = s2mpa01_regulator_set_voltage_time_sel, + .set_ramp_delay = s2mpa01_set_ramp_delay, +}; + +#define regulator_desc_ldo1(num) { \ + .name = "LDO"#num, \ + .id = S2MPA01_LDO##num, \ + .ops = &s2mpa01_ldo_ops, \ + .type = REGULATOR_VOLTAGE, \ + .owner = THIS_MODULE, \ + .min_uV = S2MPA01_LDO_MIN, \ + .uV_step = S2MPA01_LDO_STEP1, \ + .n_voltages = S2MPA01_LDO_N_VOLTAGES, \ + .vsel_reg = S2MPA01_REG_L1CTRL + num - 1, \ + .vsel_mask = S2MPA01_LDO_VSEL_MASK, \ + .enable_reg = S2MPA01_REG_L1CTRL + num - 1, \ + .enable_mask = S2MPA01_ENABLE_MASK \ +} +#define regulator_desc_ldo2(num) { \ + .name = "LDO"#num, \ + .id = S2MPA01_LDO##num, \ + .ops = &s2mpa01_ldo_ops, \ + .type = REGULATOR_VOLTAGE, \ + .owner = THIS_MODULE, \ + .min_uV = S2MPA01_LDO_MIN, \ + .uV_step = S2MPA01_LDO_STEP2, \ + .n_voltages = S2MPA01_LDO_N_VOLTAGES, \ + .vsel_reg = S2MPA01_REG_L1CTRL + num - 1, \ + .vsel_mask = S2MPA01_LDO_VSEL_MASK, \ + .enable_reg = S2MPA01_REG_L1CTRL + num - 1, \ + .enable_mask = S2MPA01_ENABLE_MASK \ +} + +#define regulator_desc_buck1_4(num) { \ + .name = "BUCK"#num, \ + .id = S2MPA01_BUCK##num, \ + .ops = &s2mpa01_buck_ops, \ + .type = REGULATOR_VOLTAGE, \ + .owner = THIS_MODULE, \ + .min_uV = S2MPA01_BUCK_MIN1, \ + .uV_step = S2MPA01_BUCK_STEP1, \ + .n_voltages = S2MPA01_BUCK_N_VOLTAGES, \ + .ramp_delay = S2MPA01_RAMP_DELAY, \ + .vsel_reg = S2MPA01_REG_B1CTRL2 + (num - 1) * 2, \ + .vsel_mask = S2MPA01_BUCK_VSEL_MASK, \ + .enable_reg = S2MPA01_REG_B1CTRL1 + (num - 1) * 2, \ + .enable_mask = S2MPA01_ENABLE_MASK \ +} + +#define regulator_desc_buck5 { \ + .name = "BUCK5", \ + .id = S2MPA01_BUCK5, \ + .ops = &s2mpa01_buck_ops, \ + .type = REGULATOR_VOLTAGE, \ + .owner = THIS_MODULE, \ + .min_uV = S2MPA01_BUCK_MIN2, \ + .uV_step = S2MPA01_BUCK_STEP1, \ + .n_voltages = S2MPA01_BUCK_N_VOLTAGES, \ + .ramp_delay = S2MPA01_RAMP_DELAY, \ + .vsel_reg = S2MPA01_REG_B5CTRL2, \ + .vsel_mask = S2MPA01_BUCK_VSEL_MASK, \ + .enable_reg = S2MPA01_REG_B5CTRL1, \ + .enable_mask = S2MPA01_ENABLE_MASK \ +} + +#define regulator_desc_buck6_7(num) { \ + .name = "BUCK"#num, \ + .id = S2MPA01_BUCK##num, \ + .ops = &s2mpa01_buck_ops, \ + .type = REGULATOR_VOLTAGE, \ + .owner = THIS_MODULE, \ + .min_uV = S2MPA01_BUCK_MIN1, \ + .uV_step = S2MPA01_BUCK_STEP1, \ + .n_voltages = S2MPA01_BUCK_N_VOLTAGES, \ + .ramp_delay = S2MPA01_RAMP_DELAY, \ + .vsel_reg = S2MPA01_REG_B6CTRL2 + (num - 6) * 2, \ + .vsel_mask = S2MPA01_BUCK_VSEL_MASK, \ + .enable_reg = S2MPA01_REG_B6CTRL1 + (num - 6) * 2, \ + .enable_mask = S2MPA01_ENABLE_MASK \ +} + +#define regulator_desc_buck8 { \ + .name = "BUCK8", \ + .id = S2MPA01_BUCK8, \ + .ops = &s2mpa01_buck_ops, \ + .type = REGULATOR_VOLTAGE, \ + .owner = THIS_MODULE, \ + .min_uV = S2MPA01_BUCK_MIN2, \ + .uV_step = S2MPA01_BUCK_STEP2, \ + .n_voltages = S2MPA01_BUCK_N_VOLTAGES, \ + .ramp_delay = S2MPA01_RAMP_DELAY, \ + .vsel_reg = S2MPA01_REG_B8CTRL2, \ + .vsel_mask = S2MPA01_BUCK_VSEL_MASK, \ + .enable_reg = S2MPA01_REG_B8CTRL1, \ + .enable_mask = S2MPA01_ENABLE_MASK \ +} + +#define regulator_desc_buck9 { \ + .name = "BUCK9", \ + .id = S2MPA01_BUCK9, \ + .ops = &s2mpa01_buck_ops, \ + .type = REGULATOR_VOLTAGE, \ + .owner = THIS_MODULE, \ + .min_uV = S2MPA01_BUCK_MIN4, \ + .uV_step = S2MPA01_BUCK_STEP2, \ + .n_voltages = S2MPA01_BUCK_N_VOLTAGES, \ + .ramp_delay = S2MPA01_RAMP_DELAY, \ + .vsel_reg = S2MPA01_REG_B9CTRL2, \ + .vsel_mask = S2MPA01_BUCK_VSEL_MASK, \ + .enable_reg = S2MPA01_REG_B9CTRL1, \ + .enable_mask = S2MPA01_ENABLE_MASK \ +} + +#define regulator_desc_buck10 { \ + .name = "BUCK10", \ + .id = S2MPA01_BUCK10, \ + .ops = &s2mpa01_buck_ops, \ + .type = REGULATOR_VOLTAGE, \ + .owner = THIS_MODULE, \ + .min_uV = S2MPA01_BUCK_MIN3, \ + .uV_step = S2MPA01_BUCK_STEP2, \ + .n_voltages = S2MPA01_BUCK_N_VOLTAGES, \ + .ramp_delay = S2MPA01_RAMP_DELAY, \ + .vsel_reg = S2MPA01_REG_B10CTRL2, \ + .vsel_mask = S2MPA01_BUCK_VSEL_MASK, \ + .enable_reg = S2MPA01_REG_B10CTRL1, \ + .enable_mask = S2MPA01_ENABLE_MASK \ +} + +static struct regulator_desc regulators[] = { + regulator_desc_ldo2(1), + regulator_desc_ldo1(2), + regulator_desc_ldo1(3), + regulator_desc_ldo1(4), + regulator_desc_ldo1(5), + regulator_desc_ldo2(6), + regulator_desc_ldo1(7), + regulator_desc_ldo1(8), + regulator_desc_ldo1(9), + regulator_desc_ldo1(10), + regulator_desc_ldo2(11), + regulator_desc_ldo1(12), + regulator_desc_ldo1(13), + regulator_desc_ldo1(14), + regulator_desc_ldo1(15), + regulator_desc_ldo1(16), + regulator_desc_ldo1(17), + regulator_desc_ldo1(18), + regulator_desc_ldo1(19), + regulator_desc_ldo1(20), + regulator_desc_ldo1(21), + regulator_desc_ldo2(22), + regulator_desc_ldo2(23), + regulator_desc_ldo1(24), + regulator_desc_ldo1(25), + regulator_desc_ldo1(26), + regulator_desc_buck1_4(1), + regulator_desc_buck1_4(2), + regulator_desc_buck1_4(3), + regulator_desc_buck1_4(4), + regulator_desc_buck5, + regulator_desc_buck6_7(6), + regulator_desc_buck6_7(7), + regulator_desc_buck8, + regulator_desc_buck9, + regulator_desc_buck10, +}; + +static int s2mpa01_pmic_probe(struct platform_device *pdev) +{ + struct sec_pmic_dev *iodev = dev_get_drvdata(pdev->dev.parent); + struct sec_platform_data *pdata = dev_get_platdata(iodev->dev); + struct of_regulator_match rdata[S2MPA01_REGULATOR_MAX]; + struct device_node *reg_np = NULL; + struct regulator_config config = { }; + struct s2mpa01_info *s2mpa01; + int i; + + s2mpa01 = devm_kzalloc(&pdev->dev, sizeof(*s2mpa01), GFP_KERNEL); + if (!s2mpa01) + return -ENOMEM; + + for (i = 0; i < S2MPA01_REGULATOR_CNT; i++) + rdata[i].name = regulators[i].name; + + if (iodev->dev->of_node) { + reg_np = of_get_child_by_name(iodev->dev->of_node, + "regulators"); + if (!reg_np) { + dev_err(&pdev->dev, + "could not find regulators sub-node\n"); + return -EINVAL; + } + + of_regulator_match(&pdev->dev, reg_np, rdata, + S2MPA01_REGULATOR_MAX); + of_node_put(reg_np); + } + + platform_set_drvdata(pdev, s2mpa01); + + config.dev = &pdev->dev; + config.regmap = iodev->regmap_pmic; + config.driver_data = s2mpa01; + + for (i = 0; i < S2MPA01_REGULATOR_MAX; i++) { + struct regulator_dev *rdev; + if (pdata) + config.init_data = pdata->regulators[i].initdata; + else + config.init_data = rdata[i].init_data; + + if (reg_np) + config.of_node = rdata[i].of_node; + + rdev = devm_regulator_register(&pdev->dev, + ®ulators[i], &config); + if (IS_ERR(rdev)) { + dev_err(&pdev->dev, "regulator init failed for %d\n", + i); + return PTR_ERR(rdev); + } + } + + return 0; +} + +static const struct platform_device_id s2mpa01_pmic_id[] = { + { "s2mpa01-pmic", 0}, + { }, +}; +MODULE_DEVICE_TABLE(platform, s2mpa01_pmic_id); + +static struct platform_driver s2mpa01_pmic_driver = { + .driver = { + .name = "s2mpa01-pmic", + .owner = THIS_MODULE, + }, + .probe = s2mpa01_pmic_probe, + .id_table = s2mpa01_pmic_id, +}; + +module_platform_driver(s2mpa01_pmic_driver); + +/* Module information */ +MODULE_AUTHOR("Sangbeom Kim "); +MODULE_AUTHOR("Sachin Kamat "); +MODULE_DESCRIPTION("SAMSUNG S2MPA01 Regulator Driver"); +MODULE_LICENSE("GPL"); -- cgit v1.2.3-70-g09d2 From 15f77300c9eedb095c8f4097628af51e8e14de30 Mon Sep 17 00:00:00 2001 From: Krzysztof Kozlowski Date: Fri, 7 Mar 2014 11:10:50 +0100 Subject: regulator: s2mps11: Add support for S2MPS14 regulators Add support for S2MPS14 PMIC regulators to s2mps11 driver. The S2MPS14 has fewer BUCK-s and LDO-s than S2MPS11. It also does not support controlling the BUCK ramp delay. Signed-off-by: Krzysztof Kozlowski Cc: Mark Brown Cc: Liam Girdwood Reviewed-by: Yadwinder Singh Brar Signed-off-by: Mark Brown --- drivers/regulator/Kconfig | 9 +- drivers/regulator/s2mps11.c | 252 +++++++++++++++++++++++++++++++++----------- 2 files changed, 196 insertions(+), 65 deletions(-) (limited to 'drivers/regulator/Kconfig') diff --git a/drivers/regulator/Kconfig b/drivers/regulator/Kconfig index 8f8e6710bb4..69e6bf755e0 100644 --- a/drivers/regulator/Kconfig +++ b/drivers/regulator/Kconfig @@ -424,12 +424,13 @@ config REGULATOR_S2MPA01 via I2C bus. S2MPA01 has 10 Bucks and 26 LDO outputs. config REGULATOR_S2MPS11 - tristate "Samsung S2MPS11 voltage regulator" + tristate "Samsung S2MPS11/S2MPS14 voltage regulator" depends on MFD_SEC_CORE help - This driver supports a Samsung S2MPS11 voltage output regulator - via I2C bus. S2MPS11 is comprised of high efficient Buck converters - including Dual-Phase Buck converter, Buck-Boost converter, various LDOs. + This driver supports a Samsung S2MPS11/S2MPS14 voltage output + regulator via I2C bus. The chip is comprised of high efficient Buck + converters including Dual-Phase Buck converter, Buck-Boost converter, + various LDOs. config REGULATOR_S5M8767 tristate "Samsung S5M8767A voltage regulator" diff --git a/drivers/regulator/s2mps11.c b/drivers/regulator/s2mps11.c index ca876de72ea..65697b1a26c 100644 --- a/drivers/regulator/s2mps11.c +++ b/drivers/regulator/s2mps11.c @@ -1,13 +1,18 @@ /* * s2mps11.c * - * Copyright (c) 2012 Samsung Electronics Co., Ltd + * Copyright (c) 2012-2014 Samsung Electronics Co., Ltd * http://www.samsung.com * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. * */ @@ -24,6 +29,7 @@ #include #include #include +#include struct s2mps11_info { unsigned int rdev_num; @@ -233,7 +239,7 @@ static struct regulator_ops s2mps11_buck_ops = { .set_ramp_delay = s2mps11_set_ramp_delay, }; -#define regulator_desc_ldo1(num) { \ +#define regulator_desc_s2mps11_ldo1(num) { \ .name = "LDO"#num, \ .id = S2MPS11_LDO##num, \ .ops = &s2mps11_ldo_ops, \ @@ -247,7 +253,7 @@ static struct regulator_ops s2mps11_buck_ops = { .enable_reg = S2MPS11_REG_L1CTRL + num - 1, \ .enable_mask = S2MPS11_ENABLE_MASK \ } -#define regulator_desc_ldo2(num) { \ +#define regulator_desc_s2mps11_ldo2(num) { \ .name = "LDO"#num, \ .id = S2MPS11_LDO##num, \ .ops = &s2mps11_ldo_ops, \ @@ -262,7 +268,7 @@ static struct regulator_ops s2mps11_buck_ops = { .enable_mask = S2MPS11_ENABLE_MASK \ } -#define regulator_desc_buck1_4(num) { \ +#define regulator_desc_s2mps11_buck1_4(num) { \ .name = "BUCK"#num, \ .id = S2MPS11_BUCK##num, \ .ops = &s2mps11_buck_ops, \ @@ -278,7 +284,7 @@ static struct regulator_ops s2mps11_buck_ops = { .enable_mask = S2MPS11_ENABLE_MASK \ } -#define regulator_desc_buck5 { \ +#define regulator_desc_s2mps11_buck5 { \ .name = "BUCK5", \ .id = S2MPS11_BUCK5, \ .ops = &s2mps11_buck_ops, \ @@ -294,7 +300,7 @@ static struct regulator_ops s2mps11_buck_ops = { .enable_mask = S2MPS11_ENABLE_MASK \ } -#define regulator_desc_buck6_8(num) { \ +#define regulator_desc_s2mps11_buck6_8(num) { \ .name = "BUCK"#num, \ .id = S2MPS11_BUCK##num, \ .ops = &s2mps11_buck_ops, \ @@ -310,7 +316,7 @@ static struct regulator_ops s2mps11_buck_ops = { .enable_mask = S2MPS11_ENABLE_MASK \ } -#define regulator_desc_buck9 { \ +#define regulator_desc_s2mps11_buck9 { \ .name = "BUCK9", \ .id = S2MPS11_BUCK9, \ .ops = &s2mps11_buck_ops, \ @@ -326,7 +332,7 @@ static struct regulator_ops s2mps11_buck_ops = { .enable_mask = S2MPS11_ENABLE_MASK \ } -#define regulator_desc_buck10 { \ +#define regulator_desc_s2mps11_buck10 { \ .name = "BUCK10", \ .id = S2MPS11_BUCK10, \ .ops = &s2mps11_buck_ops, \ @@ -343,54 +349,173 @@ static struct regulator_ops s2mps11_buck_ops = { } static const struct regulator_desc s2mps11_regulators[] = { - regulator_desc_ldo2(1), - regulator_desc_ldo1(2), - regulator_desc_ldo1(3), - regulator_desc_ldo1(4), - regulator_desc_ldo1(5), - regulator_desc_ldo2(6), - regulator_desc_ldo1(7), - regulator_desc_ldo1(8), - regulator_desc_ldo1(9), - regulator_desc_ldo1(10), - regulator_desc_ldo2(11), - regulator_desc_ldo1(12), - regulator_desc_ldo1(13), - regulator_desc_ldo1(14), - regulator_desc_ldo1(15), - regulator_desc_ldo1(16), - regulator_desc_ldo1(17), - regulator_desc_ldo1(18), - regulator_desc_ldo1(19), - regulator_desc_ldo1(20), - regulator_desc_ldo1(21), - regulator_desc_ldo2(22), - regulator_desc_ldo2(23), - regulator_desc_ldo1(24), - regulator_desc_ldo1(25), - regulator_desc_ldo1(26), - regulator_desc_ldo2(27), - regulator_desc_ldo1(28), - regulator_desc_ldo1(29), - regulator_desc_ldo1(30), - regulator_desc_ldo1(31), - regulator_desc_ldo1(32), - regulator_desc_ldo1(33), - regulator_desc_ldo1(34), - regulator_desc_ldo1(35), - regulator_desc_ldo1(36), - regulator_desc_ldo1(37), - regulator_desc_ldo1(38), - regulator_desc_buck1_4(1), - regulator_desc_buck1_4(2), - regulator_desc_buck1_4(3), - regulator_desc_buck1_4(4), - regulator_desc_buck5, - regulator_desc_buck6_8(6), - regulator_desc_buck6_8(7), - regulator_desc_buck6_8(8), - regulator_desc_buck9, - regulator_desc_buck10, + regulator_desc_s2mps11_ldo2(1), + regulator_desc_s2mps11_ldo1(2), + regulator_desc_s2mps11_ldo1(3), + regulator_desc_s2mps11_ldo1(4), + regulator_desc_s2mps11_ldo1(5), + regulator_desc_s2mps11_ldo2(6), + regulator_desc_s2mps11_ldo1(7), + regulator_desc_s2mps11_ldo1(8), + regulator_desc_s2mps11_ldo1(9), + regulator_desc_s2mps11_ldo1(10), + regulator_desc_s2mps11_ldo2(11), + regulator_desc_s2mps11_ldo1(12), + regulator_desc_s2mps11_ldo1(13), + regulator_desc_s2mps11_ldo1(14), + regulator_desc_s2mps11_ldo1(15), + regulator_desc_s2mps11_ldo1(16), + regulator_desc_s2mps11_ldo1(17), + regulator_desc_s2mps11_ldo1(18), + regulator_desc_s2mps11_ldo1(19), + regulator_desc_s2mps11_ldo1(20), + regulator_desc_s2mps11_ldo1(21), + regulator_desc_s2mps11_ldo2(22), + regulator_desc_s2mps11_ldo2(23), + regulator_desc_s2mps11_ldo1(24), + regulator_desc_s2mps11_ldo1(25), + regulator_desc_s2mps11_ldo1(26), + regulator_desc_s2mps11_ldo2(27), + regulator_desc_s2mps11_ldo1(28), + regulator_desc_s2mps11_ldo1(29), + regulator_desc_s2mps11_ldo1(30), + regulator_desc_s2mps11_ldo1(31), + regulator_desc_s2mps11_ldo1(32), + regulator_desc_s2mps11_ldo1(33), + regulator_desc_s2mps11_ldo1(34), + regulator_desc_s2mps11_ldo1(35), + regulator_desc_s2mps11_ldo1(36), + regulator_desc_s2mps11_ldo1(37), + regulator_desc_s2mps11_ldo1(38), + regulator_desc_s2mps11_buck1_4(1), + regulator_desc_s2mps11_buck1_4(2), + regulator_desc_s2mps11_buck1_4(3), + regulator_desc_s2mps11_buck1_4(4), + regulator_desc_s2mps11_buck5, + regulator_desc_s2mps11_buck6_8(6), + regulator_desc_s2mps11_buck6_8(7), + regulator_desc_s2mps11_buck6_8(8), + regulator_desc_s2mps11_buck9, + regulator_desc_s2mps11_buck10, +}; + +static struct regulator_ops s2mps14_reg_ops = { + .list_voltage = regulator_list_voltage_linear, + .map_voltage = regulator_map_voltage_linear, + .is_enabled = regulator_is_enabled_regmap, + .enable = regulator_enable_regmap, + .disable = regulator_disable_regmap, + .get_voltage_sel = regulator_get_voltage_sel_regmap, + .set_voltage_sel = regulator_set_voltage_sel_regmap, + .set_voltage_time_sel = regulator_set_voltage_time_sel, +}; + +#define regulator_desc_s2mps14_ldo1(num) { \ + .name = "LDO"#num, \ + .id = S2MPS14_LDO##num, \ + .ops = &s2mps14_reg_ops, \ + .type = REGULATOR_VOLTAGE, \ + .owner = THIS_MODULE, \ + .min_uV = S2MPS14_LDO_MIN_800MV, \ + .uV_step = S2MPS14_LDO_STEP_25MV, \ + .n_voltages = S2MPS14_LDO_N_VOLTAGES, \ + .vsel_reg = S2MPS14_REG_L1CTRL + num - 1, \ + .vsel_mask = S2MPS14_LDO_VSEL_MASK, \ + .enable_reg = S2MPS14_REG_L1CTRL + num - 1, \ + .enable_mask = S2MPS14_ENABLE_MASK \ +} +#define regulator_desc_s2mps14_ldo2(num) { \ + .name = "LDO"#num, \ + .id = S2MPS14_LDO##num, \ + .ops = &s2mps14_reg_ops, \ + .type = REGULATOR_VOLTAGE, \ + .owner = THIS_MODULE, \ + .min_uV = S2MPS14_LDO_MIN_1800MV, \ + .uV_step = S2MPS14_LDO_STEP_25MV, \ + .n_voltages = S2MPS14_LDO_N_VOLTAGES, \ + .vsel_reg = S2MPS14_REG_L1CTRL + num - 1, \ + .vsel_mask = S2MPS14_LDO_VSEL_MASK, \ + .enable_reg = S2MPS14_REG_L1CTRL + num - 1, \ + .enable_mask = S2MPS14_ENABLE_MASK \ +} +#define regulator_desc_s2mps14_ldo3(num) { \ + .name = "LDO"#num, \ + .id = S2MPS14_LDO##num, \ + .ops = &s2mps14_reg_ops, \ + .type = REGULATOR_VOLTAGE, \ + .owner = THIS_MODULE, \ + .min_uV = S2MPS14_LDO_MIN_800MV, \ + .uV_step = S2MPS14_LDO_STEP_12_5MV, \ + .n_voltages = S2MPS14_LDO_N_VOLTAGES, \ + .vsel_reg = S2MPS14_REG_L1CTRL + num - 1, \ + .vsel_mask = S2MPS14_LDO_VSEL_MASK, \ + .enable_reg = S2MPS14_REG_L1CTRL + num - 1, \ + .enable_mask = S2MPS14_ENABLE_MASK \ +} +#define regulator_desc_s2mps14_buck1235(num) { \ + .name = "BUCK"#num, \ + .id = S2MPS14_BUCK##num, \ + .ops = &s2mps14_reg_ops, \ + .type = REGULATOR_VOLTAGE, \ + .owner = THIS_MODULE, \ + .min_uV = S2MPS14_BUCK1235_MIN_600MV, \ + .uV_step = S2MPS14_BUCK1235_STEP_6_25MV, \ + .n_voltages = S2MPS14_BUCK_N_VOLTAGES, \ + .linear_min_sel = S2MPS14_BUCK1235_START_SEL, \ + .ramp_delay = S2MPS14_BUCK_RAMP_DELAY, \ + .vsel_reg = S2MPS14_REG_B1CTRL2 + (num - 1) * 2, \ + .vsel_mask = S2MPS14_BUCK_VSEL_MASK, \ + .enable_reg = S2MPS14_REG_B1CTRL1 + (num - 1) * 2, \ + .enable_mask = S2MPS14_ENABLE_MASK \ +} +#define regulator_desc_s2mps14_buck4(num) { \ + .name = "BUCK"#num, \ + .id = S2MPS14_BUCK##num, \ + .ops = &s2mps14_reg_ops, \ + .type = REGULATOR_VOLTAGE, \ + .owner = THIS_MODULE, \ + .min_uV = S2MPS14_BUCK4_MIN_1400MV, \ + .uV_step = S2MPS14_BUCK4_STEP_12_5MV, \ + .n_voltages = S2MPS14_BUCK_N_VOLTAGES, \ + .linear_min_sel = S2MPS14_BUCK4_START_SEL, \ + .ramp_delay = S2MPS14_BUCK_RAMP_DELAY, \ + .vsel_reg = S2MPS14_REG_B1CTRL2 + (num - 1) * 2, \ + .vsel_mask = S2MPS14_BUCK_VSEL_MASK, \ + .enable_reg = S2MPS14_REG_B1CTRL1 + (num - 1) * 2, \ + .enable_mask = S2MPS14_ENABLE_MASK \ +} + +static const struct regulator_desc s2mps14_regulators[] = { + regulator_desc_s2mps14_ldo3(1), + regulator_desc_s2mps14_ldo3(2), + regulator_desc_s2mps14_ldo1(3), + regulator_desc_s2mps14_ldo1(4), + regulator_desc_s2mps14_ldo3(5), + regulator_desc_s2mps14_ldo3(6), + regulator_desc_s2mps14_ldo1(7), + regulator_desc_s2mps14_ldo2(8), + regulator_desc_s2mps14_ldo3(9), + regulator_desc_s2mps14_ldo3(10), + regulator_desc_s2mps14_ldo1(11), + regulator_desc_s2mps14_ldo2(12), + regulator_desc_s2mps14_ldo2(13), + regulator_desc_s2mps14_ldo2(14), + regulator_desc_s2mps14_ldo2(15), + regulator_desc_s2mps14_ldo2(16), + regulator_desc_s2mps14_ldo2(17), + regulator_desc_s2mps14_ldo2(18), + regulator_desc_s2mps14_ldo1(19), + regulator_desc_s2mps14_ldo1(20), + regulator_desc_s2mps14_ldo1(21), + regulator_desc_s2mps14_ldo3(22), + regulator_desc_s2mps14_ldo1(23), + regulator_desc_s2mps14_ldo2(24), + regulator_desc_s2mps14_ldo2(25), + regulator_desc_s2mps14_buck1235(1), + regulator_desc_s2mps14_buck1235(2), + regulator_desc_s2mps14_buck1235(3), + regulator_desc_s2mps14_buck4(4), + regulator_desc_s2mps14_buck1235(5), }; static int s2mps11_pmic_probe(struct platform_device *pdev) @@ -416,6 +541,10 @@ static int s2mps11_pmic_probe(struct platform_device *pdev) s2mps11->rdev_num = ARRAY_SIZE(s2mps11_regulators); regulators = s2mps11_regulators; break; + case S2MPS14X: + s2mps11->rdev_num = ARRAY_SIZE(s2mps14_regulators); + regulators = s2mps14_regulators; + break; default: dev_err(&pdev->dev, "Invalid device type: %u\n", dev_type); return -EINVAL; @@ -482,6 +611,7 @@ out: static const struct platform_device_id s2mps11_pmic_id[] = { { "s2mps11-pmic", S2MPS11X}, + { "s2mps14-pmic", S2MPS14X}, { }, }; MODULE_DEVICE_TABLE(platform, s2mps11_pmic_id); @@ -509,5 +639,5 @@ module_exit(s2mps11_pmic_exit); /* Module information */ MODULE_AUTHOR("Sangbeom Kim "); -MODULE_DESCRIPTION("SAMSUNG S2MPS11 Regulator Driver"); +MODULE_DESCRIPTION("SAMSUNG S2MPS11/S2MPS14 Regulator Driver"); MODULE_LICENSE("GPL"); -- cgit v1.2.3-70-g09d2 From 4a5d301328eb7cfb88f8164ddfd90c018b70ddc4 Mon Sep 17 00:00:00 2001 From: Lee Jones Date: Fri, 21 Mar 2014 10:21:36 +0000 Subject: regulator: Add new driver for ST's PWM controlled voltage regulators On some STMicroelectronics hardware reside regulators consisting partly of a PWM input connected to the feedback loop. As the PWM duty-cycle is varied the output voltage adapts. This driver allows us to vary the output voltage by adapting the PWM input duty-cycle. Signed-off-by: Lee Jones Signed-off-by: Mark Brown --- drivers/regulator/Kconfig | 6 ++ drivers/regulator/Makefile | 1 + drivers/regulator/st-pwm.c | 193 +++++++++++++++++++++++++++++++++++++++++++++ 3 files changed, 200 insertions(+) create mode 100644 drivers/regulator/st-pwm.c (limited to 'drivers/regulator/Kconfig') diff --git a/drivers/regulator/Kconfig b/drivers/regulator/Kconfig index 6a7932822e3..a6b29cbe8e2 100644 --- a/drivers/regulator/Kconfig +++ b/drivers/regulator/Kconfig @@ -432,6 +432,12 @@ config REGULATOR_S5M8767 via I2C bus. S5M8767A have 9 Bucks and 28 LDOs output and supports DVS mode with 8bits of output voltage control. +config REGULATOR_ST_PWM + tristate "STMicroelectronics PWM voltage regulator" + depends on ARCH_STI + help + This driver supports ST's PWM controlled voltage regulators. + config REGULATOR_TI_ABB tristate "TI Adaptive Body Bias on-chip LDO" depends on ARCH_OMAP diff --git a/drivers/regulator/Makefile b/drivers/regulator/Makefile index 979f9ddcf25..d0c2bb85b8c 100644 --- a/drivers/regulator/Makefile +++ b/drivers/regulator/Makefile @@ -59,6 +59,7 @@ obj-$(CONFIG_REGULATOR_PCF50633) += pcf50633-regulator.o obj-$(CONFIG_REGULATOR_RC5T583) += rc5t583-regulator.o obj-$(CONFIG_REGULATOR_S2MPS11) += s2mps11.o obj-$(CONFIG_REGULATOR_S5M8767) += s5m8767.o +obj-$(CONFIG_REGULATOR_ST_PWM) += st-pwm.o obj-$(CONFIG_REGULATOR_STW481X_VMMC) += stw481x-vmmc.o obj-$(CONFIG_REGULATOR_TI_ABB) += ti-abb-regulator.o obj-$(CONFIG_REGULATOR_TPS6105X) += tps6105x-regulator.o diff --git a/drivers/regulator/st-pwm.c b/drivers/regulator/st-pwm.c new file mode 100644 index 00000000000..6ef569ffd97 --- /dev/null +++ b/drivers/regulator/st-pwm.c @@ -0,0 +1,193 @@ +/* + * Regulator driver for ST's PWM Regulators + * + * Copyright (C) 2014 - STMicroelectronics Inc. + * + * Author: Lee Jones + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#define ST_PWM_REG_PERIOD 8448 + +struct st_pwm_regulator_pdata { + const struct regulator_desc *desc; + struct st_pwm_voltages *duty_cycle_table; +}; + +struct st_pwm_regulator_data { + const struct st_pwm_regulator_pdata *pdata; + struct pwm_device *pwm; + bool enabled; + int state; +}; + +struct st_pwm_voltages { + unsigned int uV; + unsigned int dutycycle; +}; + +static int st_pwm_regulator_get_voltage(struct regulator_dev *dev) +{ + struct st_pwm_regulator_data *drvdata = rdev_get_drvdata(dev); + + return drvdata->pdata->duty_cycle_table[drvdata->state].uV; +} + +static int st_pwm_regulator_set_voltage_sel(struct regulator_dev *dev, + unsigned selector) +{ + struct st_pwm_regulator_data *drvdata = rdev_get_drvdata(dev); + int dutycycle; + int ret; + + if (selector >= dev->desc->n_voltages) + return -EINVAL; + + dutycycle = (ST_PWM_REG_PERIOD / 100) * + drvdata->pdata->duty_cycle_table[selector].dutycycle; + + ret = pwm_config(drvdata->pwm, dutycycle, ST_PWM_REG_PERIOD); + if (ret) { + dev_err(&dev->dev, "Failed to configure PWM\n"); + return ret; + } + + drvdata->state = selector; + + if (!drvdata->enabled) { + ret = pwm_enable(drvdata->pwm); + if (ret) { + dev_err(&dev->dev, "Failed to enable PWM\n"); + return ret; + } + drvdata->enabled = true; + } + + return 0; +} + +static int st_pwm_regulator_list_voltage(struct regulator_dev *dev, + unsigned selector) +{ + struct st_pwm_regulator_data *drvdata = rdev_get_drvdata(dev); + + if (selector >= dev->desc->n_voltages) + return -EINVAL; + + return drvdata->pdata->duty_cycle_table[selector].uV; +} + +static struct regulator_ops st_pwm_regulator_voltage_ops = { + .set_voltage_sel = st_pwm_regulator_set_voltage_sel, + .get_voltage = st_pwm_regulator_get_voltage, + .list_voltage = st_pwm_regulator_list_voltage, + .map_voltage = regulator_map_voltage_iterate, +}; + +static struct st_pwm_voltages b2105_duty_cycle_table[] = { + { .uV = 1114000, .dutycycle = 0, }, + { .uV = 1095000, .dutycycle = 10, }, + { .uV = 1076000, .dutycycle = 20, }, + { .uV = 1056000, .dutycycle = 30, }, + { .uV = 1036000, .dutycycle = 40, }, + { .uV = 1016000, .dutycycle = 50, }, + /* WARNING: Values above 50% duty-cycle cause boot failures. */ +}; + +static const struct regulator_desc b2105_desc = { + .name = "b2105-pwm-regulator", + .ops = &st_pwm_regulator_voltage_ops, + .type = REGULATOR_VOLTAGE, + .owner = THIS_MODULE, + .n_voltages = ARRAY_SIZE(b2105_duty_cycle_table), + .supply_name = "pwm", +}; + +static const struct st_pwm_regulator_pdata b2105_info = { + .desc = &b2105_desc, + .duty_cycle_table = b2105_duty_cycle_table, +}; + +static struct of_device_id st_pwm_of_match[] = { + { .compatible = "st,b2105-pwm-regulator", .data = &b2105_info, }, + { }, +}; +MODULE_DEVICE_TABLE(of, st_pwm_of_match); + +static int st_pwm_regulator_probe(struct platform_device *pdev) +{ + struct st_pwm_regulator_data *drvdata; + struct regulator_dev *regulator; + struct regulator_config config = { }; + struct device_node *np = pdev->dev.of_node; + const struct of_device_id *of_match; + + if (!np) { + dev_err(&pdev->dev, "Device Tree node missing\n"); + return -EINVAL; + } + + drvdata = devm_kzalloc(&pdev->dev, sizeof(*drvdata), GFP_KERNEL); + if (!drvdata) + return -ENOMEM; + + of_match = of_match_device(st_pwm_of_match, &pdev->dev); + if (!of_match) { + dev_err(&pdev->dev, "failed to match of device\n"); + return -ENODEV; + } + drvdata->pdata = of_match->data; + + config.init_data = of_get_regulator_init_data(&pdev->dev, np); + if (!config.init_data) + return -ENOMEM; + + config.of_node = np; + config.dev = &pdev->dev; + config.driver_data = drvdata; + + drvdata->pwm = devm_pwm_get(&pdev->dev, NULL); + if (IS_ERR(drvdata->pwm)) { + dev_err(&pdev->dev, "Failed to get PWM\n"); + return PTR_ERR(drvdata->pwm); + } + + regulator = devm_regulator_register(&pdev->dev, + drvdata->pdata->desc, &config); + if (IS_ERR(regulator)) { + dev_err(&pdev->dev, "Failed to register regulator %s\n", + drvdata->pdata->desc->name); + return PTR_ERR(regulator); + } + + return 0; +} + +static struct platform_driver st_pwm_regulator_driver = { + .driver = { + .name = "st-pwm-regulator", + .owner = THIS_MODULE, + .of_match_table = of_match_ptr(st_pwm_of_match), + }, + .probe = st_pwm_regulator_probe, +}; + +module_platform_driver(st_pwm_regulator_driver); + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Lee Jones "); +MODULE_DESCRIPTION("ST PWM Regulator Driver"); +MODULE_ALIAS("platform:st_pwm-regulator"); -- cgit v1.2.3-70-g09d2