From c172708d38a401b2f3f841dfcd862b469fa0b670 Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Wed, 4 Apr 2012 00:50:22 +0100 Subject: regulator: core: Use a struct to pass in regulator runtime configuration Rather than adding new arguments to regulator_register() every time we want to add a new bit of dynamic information at runtime change the function to take these via a struct. By doing this we avoid needing to do further changes like the recent addition of device tree support which required each regulator driver to be updated to take an additional parameter. The regulator_desc which should (mostly) be static data is still passed separately as most drivers are able to configure this statically at build time. Signed-off-by: Mark Brown --- drivers/regulator/tps65912-regulator.c | 9 +++++++-- 1 file changed, 7 insertions(+), 2 deletions(-) (limited to 'drivers/regulator/tps65912-regulator.c') diff --git a/drivers/regulator/tps65912-regulator.c b/drivers/regulator/tps65912-regulator.c index 05ea096cf8a..8c9c61383fe 100644 --- a/drivers/regulator/tps65912-regulator.c +++ b/drivers/regulator/tps65912-regulator.c @@ -463,6 +463,7 @@ static struct regulator_ops tps65912_ops_ldo = { static __devinit int tps65912_probe(struct platform_device *pdev) { struct tps65912 *tps65912 = dev_get_drvdata(pdev->dev.parent); + struct regulator_config config = { }; struct tps_info *info; struct regulator_init_data *reg_data; struct regulator_dev *rdev; @@ -500,8 +501,12 @@ static __devinit int tps65912_probe(struct platform_device *pdev) pmic->desc[i].type = REGULATOR_VOLTAGE; pmic->desc[i].owner = THIS_MODULE; range = tps65912_get_range(pmic, i); - rdev = regulator_register(&pmic->desc[i], - tps65912->dev, reg_data, pmic, NULL); + + config.dev = tps65912->dev; + config.init_data = reg_data; + config.driver_data = pmic; + + rdev = regulator_register(&pmic->desc[i], &config); if (IS_ERR(rdev)) { dev_err(tps65912->dev, "failed to register %s regulator\n", -- cgit v1.2.3-70-g09d2