From 6faa7e0a4bb1215fb0a0093a0d426a72599e5982 Mon Sep 17 00:00:00 2001 From: Tobias Klauser Date: Wed, 23 Dec 2009 14:13:17 +0100 Subject: regulator/lp3971: Storage class should be before const qualifier The C99 specification states in section 6.11.5: The placement of a storage-class specifier other than at the beginning of the declaration specifiers in a declaration is an obsolescent feature. Signed-off-by: Tobias Klauser Acked-by: Mark Brown Signed-off-by: Liam Girdwood --- drivers/regulator/lp3971.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) (limited to 'drivers/regulator') diff --git a/drivers/regulator/lp3971.c b/drivers/regulator/lp3971.c index 4f33a0f4a17..3ea639f29e9 100644 --- a/drivers/regulator/lp3971.c +++ b/drivers/regulator/lp3971.c @@ -54,7 +54,7 @@ static int lp3971_set_bits(struct lp3971 *lp3971, u8 reg, u16 mask, u16 val); #define LP3971_BUCK2_BASE 0x29 #define LP3971_BUCK3_BASE 0x32 -const static int buck_base_addr[] = { +static const int buck_base_addr[] = { LP3971_BUCK1_BASE, LP3971_BUCK2_BASE, LP3971_BUCK3_BASE, @@ -63,7 +63,7 @@ const static int buck_base_addr[] = { #define LP3971_BUCK_TARGET_VOL1_REG(x) (buck_base_addr[x]) #define LP3971_BUCK_TARGET_VOL2_REG(x) (buck_base_addr[x]+1) -const static int buck_voltage_map[] = { +static const int buck_voltage_map[] = { 0, 800, 850, 900, 950, 1000, 1050, 1100, 1150, 1200, 1250, 1300, 1350, 1400, 1450, 1500, 1550, 1600, 1650, 1700, 1800, 1900, 2500, 2800, @@ -96,17 +96,17 @@ const static int buck_voltage_map[] = { #define LDO_VOL_CONTR_SHIFT(x) ((x & 1) << 2) #define LDO_VOL_CONTR_MASK 0x0f -const static int ldo45_voltage_map[] = { +static const int ldo45_voltage_map[] = { 1000, 1050, 1100, 1150, 1200, 1250, 1300, 1350, 1400, 1500, 1800, 1900, 2500, 2800, 3000, 3300, }; -const static int ldo123_voltage_map[] = { +static const int ldo123_voltage_map[] = { 1800, 1900, 2000, 2100, 2200, 2300, 2400, 2500, 2600, 2700, 2800, 2900, 3000, 3100, 3200, 3300, }; -const static int *ldo_voltage_map[] = { +static const int *ldo_voltage_map[] = { ldo123_voltage_map, /* LDO1 */ ldo123_voltage_map, /* LDO2 */ ldo123_voltage_map, /* LDO3 */ -- cgit v1.2.3-70-g09d2