From 9d8af78b07976d4d84e0df491abd4e9db848d0ad Mon Sep 17 00:00:00 2001 From: Bernhard Walle Date: Wed, 6 Feb 2008 01:38:52 -0800 Subject: rtc: add HPET RTC emulation to RTC_DRV_CMOS That patch adds the RTC emulation of the HPET timer to the new RTC_DRV_CMOS. The old drivers/char/rtc.ko driver had that functionality and it's important on new systems. [akpm@linux-foundation.org: unbreak alpha build] Signed-off-by: Bernhard Walle Cc: Alessandro Zummo Cc: David Brownell Cc: Ingo Molnar Cc: Thomas Gleixner Cc: Andi Kleen Cc: john stultz Cc: Robert Picco Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/rtc/rtc-cmos.c | 82 ++++++++++++++++++++++++++++++++++++++++++-------- 1 file changed, 69 insertions(+), 13 deletions(-) (limited to 'drivers/rtc/rtc-cmos.c') diff --git a/drivers/rtc/rtc-cmos.c b/drivers/rtc/rtc-cmos.c index ff7539a4dbe..e059f94c79e 100644 --- a/drivers/rtc/rtc-cmos.c +++ b/drivers/rtc/rtc-cmos.c @@ -36,9 +36,24 @@ #include #include +#ifdef CONFIG_HPET_EMULATE_RTC +#include +#endif + /* this is for "generic access to PC-style RTC" using CMOS_READ/CMOS_WRITE */ #include +#ifndef CONFIG_HPET_EMULATE_RTC +#define is_hpet_enabled() 0 +#define hpet_set_alarm_time(hrs, min, sec) do { } while (0) +#define hpet_set_periodic_freq(arg) 0 +#define hpet_mask_rtc_irq_bit(arg) do { } while (0) +#define hpet_set_rtc_irq_bit(arg) do { } while (0) +#define hpet_rtc_timer_init() do { } while (0) +#define hpet_register_irq_handler(h) 0 +#define hpet_unregister_irq_handler(h) do { } while (0) +extern irqreturn_t hpet_rtc_interrupt(int irq, void *dev_id); +#endif struct cmos_rtc { struct rtc_device *rtc; @@ -199,6 +214,7 @@ static int cmos_set_alarm(struct device *dev, struct rtc_wkalrm *t) sec = t->time.tm_sec; sec = (sec < 60) ? BIN2BCD(sec) : 0xff; + hpet_set_alarm_time(t->time.tm_hour, t->time.tm_min, t->time.tm_sec); spin_lock_irq(&rtc_lock); /* next rtc irq must not be from previous alarm setting */ @@ -252,7 +268,8 @@ static int cmos_irq_set_freq(struct device *dev, int freq) f = 16 - f; spin_lock_irqsave(&rtc_lock, flags); - CMOS_WRITE(RTC_REF_CLCK_32KHZ | f, RTC_FREQ_SELECT); + if (!hpet_set_periodic_freq(freq)) + CMOS_WRITE(RTC_REF_CLCK_32KHZ | f, RTC_FREQ_SELECT); spin_unlock_irqrestore(&rtc_lock, flags); return 0; @@ -314,28 +331,37 @@ cmos_rtc_ioctl(struct device *dev, unsigned int cmd, unsigned long arg) switch (cmd) { case RTC_AIE_OFF: /* alarm off */ rtc_control &= ~RTC_AIE; + hpet_mask_rtc_irq_bit(RTC_AIE); break; case RTC_AIE_ON: /* alarm on */ rtc_control |= RTC_AIE; + hpet_set_rtc_irq_bit(RTC_AIE); break; case RTC_UIE_OFF: /* update off */ rtc_control &= ~RTC_UIE; + hpet_mask_rtc_irq_bit(RTC_UIE); break; case RTC_UIE_ON: /* update on */ rtc_control |= RTC_UIE; + hpet_set_rtc_irq_bit(RTC_UIE); break; case RTC_PIE_OFF: /* periodic off */ rtc_control &= ~RTC_PIE; + hpet_mask_rtc_irq_bit(RTC_PIE); break; case RTC_PIE_ON: /* periodic on */ rtc_control |= RTC_PIE; + hpet_set_rtc_irq_bit(RTC_PIE); break; } - CMOS_WRITE(rtc_control, RTC_CONTROL); + if (!is_hpet_enabled()) + CMOS_WRITE(rtc_control, RTC_CONTROL); + rtc_intr = CMOS_READ(RTC_INTR_FLAGS); rtc_intr &= (rtc_control & RTC_IRQMASK) | RTC_IRQF; if (is_intr(rtc_intr)) rtc_update_irq(cmos->rtc, 1, rtc_intr); + spin_unlock_irqrestore(&rtc_lock, flags); return 0; } @@ -475,15 +501,25 @@ static irqreturn_t cmos_interrupt(int irq, void *p) u8 rtc_control; spin_lock(&rtc_lock); - irqstat = CMOS_READ(RTC_INTR_FLAGS); - rtc_control = CMOS_READ(RTC_CONTROL); - irqstat &= (rtc_control & RTC_IRQMASK) | RTC_IRQF; + /* + * In this case it is HPET RTC interrupt handler + * calling us, with the interrupt information + * passed as arg1, instead of irq. + */ + if (is_hpet_enabled()) + irqstat = (unsigned long)irq & 0xF0; + else { + irqstat = CMOS_READ(RTC_INTR_FLAGS); + rtc_control = CMOS_READ(RTC_CONTROL); + irqstat &= (rtc_control & RTC_IRQMASK) | RTC_IRQF; + } /* All Linux RTC alarms should be treated as if they were oneshot. * Similar code may be needed in system wakeup paths, in case the * alarm woke the system. */ if (irqstat & RTC_AIE) { + rtc_control = CMOS_READ(RTC_CONTROL); rtc_control &= ~RTC_AIE; CMOS_WRITE(rtc_control, RTC_CONTROL); CMOS_READ(RTC_INTR_FLAGS); @@ -591,8 +627,9 @@ cmos_do_probe(struct device *dev, struct resource *ports, int rtc_irq) * doesn't use 32KHz here ... for portability we might need to * do something about other clock frequencies. */ - CMOS_WRITE(RTC_REF_CLCK_32KHZ | 0x06, RTC_FREQ_SELECT); cmos_rtc.rtc->irq_freq = 1024; + if (!hpet_set_periodic_freq(cmos_rtc.rtc->irq_freq)) + CMOS_WRITE(RTC_REF_CLCK_32KHZ | 0x06, RTC_FREQ_SELECT); /* disable irqs. * @@ -615,14 +652,31 @@ cmos_do_probe(struct device *dev, struct resource *ports, int rtc_irq) goto cleanup1; } - if (is_valid_irq(rtc_irq)) - retval = request_irq(rtc_irq, cmos_interrupt, IRQF_DISABLED, - cmos_rtc.rtc->dev.bus_id, + if (is_valid_irq(rtc_irq)) { + irq_handler_t rtc_cmos_int_handler; + + if (is_hpet_enabled()) { + int err; + + rtc_cmos_int_handler = hpet_rtc_interrupt; + err = hpet_register_irq_handler(cmos_interrupt); + if (err != 0) { + printk(KERN_WARNING "hpet_register_irq_handler " + " failed in rtc_init()."); + goto cleanup1; + } + } else + rtc_cmos_int_handler = cmos_interrupt; + + retval = request_irq(rtc_irq, rtc_cmos_int_handler, + IRQF_DISABLED, cmos_rtc.rtc->dev.bus_id, cmos_rtc.rtc); - if (retval < 0) { - dev_dbg(dev, "IRQ %d is already in use\n", rtc_irq); - goto cleanup1; + if (retval < 0) { + dev_dbg(dev, "IRQ %d is already in use\n", rtc_irq); + goto cleanup1; + } } + hpet_rtc_timer_init(); /* export at least the first block of NVRAM */ nvram.size = address_space - NVRAM_OFFSET; @@ -677,8 +731,10 @@ static void __exit cmos_do_remove(struct device *dev) sysfs_remove_bin_file(&dev->kobj, &nvram); - if (is_valid_irq(cmos->irq)) + if (is_valid_irq(cmos->irq)) { free_irq(cmos->irq, cmos->rtc); + hpet_unregister_irq_handler(cmos_interrupt); + } rtc_device_unregister(cmos->rtc); cmos->rtc = NULL; -- cgit v1.2.3-70-g09d2