From a015dbc110a97ed3147546a9c914f18f71d798d0 Mon Sep 17 00:00:00 2001 From: John Stultz Date: Fri, 6 May 2011 17:24:27 -0700 Subject: rtc: m41t80: Initialize clientdata before registering device Commit f44f7f96a20 ("RTC: Initialize kernel state from RTC") uncovered an issue in a number of RTC drivers, where the drivers call rtc_device_register before initializing the clientdata. This frequently results in null pointer dereferences when the rtc_device_register immediately makes use of the rtc device, calling rtc_read_alarm. The solution is to ensure the clientdata is initialized prior to registering the rtc device. CC: Wolfram Sang CC: Alessandro Zummo CC: Thomas Gleixner CC: rtc-linux@googlegroups.com Signed-off-by: John Stultz --- drivers/rtc/rtc-m41t80.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) (limited to 'drivers/rtc/rtc-m41t80.c') diff --git a/drivers/rtc/rtc-m41t80.c b/drivers/rtc/rtc-m41t80.c index 69fe664a222..eda128fc1d3 100644 --- a/drivers/rtc/rtc-m41t80.c +++ b/drivers/rtc/rtc-m41t80.c @@ -783,6 +783,9 @@ static int m41t80_probe(struct i2c_client *client, goto exit; } + clientdata->features = id->driver_data; + i2c_set_clientdata(client, clientdata); + rtc = rtc_device_register(client->name, &client->dev, &m41t80_rtc_ops, THIS_MODULE); if (IS_ERR(rtc)) { @@ -792,8 +795,6 @@ static int m41t80_probe(struct i2c_client *client, } clientdata->rtc = rtc; - clientdata->features = id->driver_data; - i2c_set_clientdata(client, clientdata); /* Make sure HT (Halt Update) bit is cleared */ rc = i2c_smbus_read_byte_data(client, M41T80_REG_ALARM_HOUR); -- cgit v1.2.3-70-g09d2