From b07682b6056eb6701f8cb86aa5800e6f2ea7919b Mon Sep 17 00:00:00 2001 From: Santosh Shilimkar Date: Sun, 13 Dec 2009 20:05:51 +0100 Subject: mfd: Rename twl4030* driver files to enable re-use The upcoming TWL6030 is companion chip for OMAP4 like the current TWL4030 for OMAP3. The common modules like RTC, Regulator creates opportunity to re-use the most of the code from twl4030. This patch renames few common drivers twl4030* files to twl* to enable the code re-use. Signed-off-by: Rajendra Nayak Signed-off-by: Balaji T K Signed-off-by: Santosh Shilimkar Acked-by: Kevin Hilman Signed-off-by: Samuel Ortiz --- drivers/rtc/rtc-twl.c | 540 ++++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 540 insertions(+) create mode 100644 drivers/rtc/rtc-twl.c (limited to 'drivers/rtc/rtc-twl.c') diff --git a/drivers/rtc/rtc-twl.c b/drivers/rtc/rtc-twl.c new file mode 100644 index 00000000000..93565be12fa --- /dev/null +++ b/drivers/rtc/rtc-twl.c @@ -0,0 +1,540 @@ +/* + * rtc-twl4030.c -- TWL4030 Real Time Clock interface + * + * Copyright (C) 2007 MontaVista Software, Inc + * Author: Alexandre Rusev + * + * Based on original TI driver twl4030-rtc.c + * Copyright (C) 2006 Texas Instruments, Inc. + * + * Based on rtc-omap.c + * Copyright (C) 2003 MontaVista Software, Inc. + * Author: George G. Davis or + * Copyright (C) 2006 David Brownell + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include + + +/* + * RTC block register offsets (use TWL_MODULE_RTC) + */ +#define REG_SECONDS_REG 0x00 +#define REG_MINUTES_REG 0x01 +#define REG_HOURS_REG 0x02 +#define REG_DAYS_REG 0x03 +#define REG_MONTHS_REG 0x04 +#define REG_YEARS_REG 0x05 +#define REG_WEEKS_REG 0x06 + +#define REG_ALARM_SECONDS_REG 0x07 +#define REG_ALARM_MINUTES_REG 0x08 +#define REG_ALARM_HOURS_REG 0x09 +#define REG_ALARM_DAYS_REG 0x0A +#define REG_ALARM_MONTHS_REG 0x0B +#define REG_ALARM_YEARS_REG 0x0C + +#define REG_RTC_CTRL_REG 0x0D +#define REG_RTC_STATUS_REG 0x0E +#define REG_RTC_INTERRUPTS_REG 0x0F + +#define REG_RTC_COMP_LSB_REG 0x10 +#define REG_RTC_COMP_MSB_REG 0x11 + +/* RTC_CTRL_REG bitfields */ +#define BIT_RTC_CTRL_REG_STOP_RTC_M 0x01 +#define BIT_RTC_CTRL_REG_ROUND_30S_M 0x02 +#define BIT_RTC_CTRL_REG_AUTO_COMP_M 0x04 +#define BIT_RTC_CTRL_REG_MODE_12_24_M 0x08 +#define BIT_RTC_CTRL_REG_TEST_MODE_M 0x10 +#define BIT_RTC_CTRL_REG_SET_32_COUNTER_M 0x20 +#define BIT_RTC_CTRL_REG_GET_TIME_M 0x40 + +/* RTC_STATUS_REG bitfields */ +#define BIT_RTC_STATUS_REG_RUN_M 0x02 +#define BIT_RTC_STATUS_REG_1S_EVENT_M 0x04 +#define BIT_RTC_STATUS_REG_1M_EVENT_M 0x08 +#define BIT_RTC_STATUS_REG_1H_EVENT_M 0x10 +#define BIT_RTC_STATUS_REG_1D_EVENT_M 0x20 +#define BIT_RTC_STATUS_REG_ALARM_M 0x40 +#define BIT_RTC_STATUS_REG_POWER_UP_M 0x80 + +/* RTC_INTERRUPTS_REG bitfields */ +#define BIT_RTC_INTERRUPTS_REG_EVERY_M 0x03 +#define BIT_RTC_INTERRUPTS_REG_IT_TIMER_M 0x04 +#define BIT_RTC_INTERRUPTS_REG_IT_ALARM_M 0x08 + + +/* REG_SECONDS_REG through REG_YEARS_REG is how many registers? */ +#define ALL_TIME_REGS 6 + +/*----------------------------------------------------------------------*/ + +/* + * Supports 1 byte read from TWL4030 RTC register. + */ +static int twl4030_rtc_read_u8(u8 *data, u8 reg) +{ + int ret; + + ret = twl4030_i2c_read_u8(TWL4030_MODULE_RTC, data, reg); + if (ret < 0) + pr_err("twl4030_rtc: Could not read TWL4030" + "register %X - error %d\n", reg, ret); + return ret; +} + +/* + * Supports 1 byte write to TWL4030 RTC registers. + */ +static int twl4030_rtc_write_u8(u8 data, u8 reg) +{ + int ret; + + ret = twl4030_i2c_write_u8(TWL4030_MODULE_RTC, data, reg); + if (ret < 0) + pr_err("twl4030_rtc: Could not write TWL4030" + "register %X - error %d\n", reg, ret); + return ret; +} + +/* + * Cache the value for timer/alarm interrupts register; this is + * only changed by callers holding rtc ops lock (or resume). + */ +static unsigned char rtc_irq_bits; + +/* + * Enable 1/second update and/or alarm interrupts. + */ +static int set_rtc_irq_bit(unsigned char bit) +{ + unsigned char val; + int ret; + + val = rtc_irq_bits | bit; + val &= ~BIT_RTC_INTERRUPTS_REG_EVERY_M; + ret = twl4030_rtc_write_u8(val, REG_RTC_INTERRUPTS_REG); + if (ret == 0) + rtc_irq_bits = val; + + return ret; +} + +/* + * Disable update and/or alarm interrupts. + */ +static int mask_rtc_irq_bit(unsigned char bit) +{ + unsigned char val; + int ret; + + val = rtc_irq_bits & ~bit; + ret = twl4030_rtc_write_u8(val, REG_RTC_INTERRUPTS_REG); + if (ret == 0) + rtc_irq_bits = val; + + return ret; +} + +static int twl4030_rtc_alarm_irq_enable(struct device *dev, unsigned enabled) +{ + int ret; + + if (enabled) + ret = set_rtc_irq_bit(BIT_RTC_INTERRUPTS_REG_IT_ALARM_M); + else + ret = mask_rtc_irq_bit(BIT_RTC_INTERRUPTS_REG_IT_ALARM_M); + + return ret; +} + +static int twl4030_rtc_update_irq_enable(struct device *dev, unsigned enabled) +{ + int ret; + + if (enabled) + ret = set_rtc_irq_bit(BIT_RTC_INTERRUPTS_REG_IT_TIMER_M); + else + ret = mask_rtc_irq_bit(BIT_RTC_INTERRUPTS_REG_IT_TIMER_M); + + return ret; +} + +/* + * Gets current TWL4030 RTC time and date parameters. + * + * The RTC's time/alarm representation is not what gmtime(3) requires + * Linux to use: + * + * - Months are 1..12 vs Linux 0-11 + * - Years are 0..99 vs Linux 1900..N (we assume 21st century) + */ +static int twl4030_rtc_read_time(struct device *dev, struct rtc_time *tm) +{ + unsigned char rtc_data[ALL_TIME_REGS + 1]; + int ret; + u8 save_control; + + ret = twl4030_rtc_read_u8(&save_control, REG_RTC_CTRL_REG); + if (ret < 0) + return ret; + + save_control |= BIT_RTC_CTRL_REG_GET_TIME_M; + + ret = twl4030_rtc_write_u8(save_control, REG_RTC_CTRL_REG); + if (ret < 0) + return ret; + + ret = twl4030_i2c_read(TWL4030_MODULE_RTC, rtc_data, + REG_SECONDS_REG, ALL_TIME_REGS); + + if (ret < 0) { + dev_err(dev, "rtc_read_time error %d\n", ret); + return ret; + } + + tm->tm_sec = bcd2bin(rtc_data[0]); + tm->tm_min = bcd2bin(rtc_data[1]); + tm->tm_hour = bcd2bin(rtc_data[2]); + tm->tm_mday = bcd2bin(rtc_data[3]); + tm->tm_mon = bcd2bin(rtc_data[4]) - 1; + tm->tm_year = bcd2bin(rtc_data[5]) + 100; + + return ret; +} + +static int twl4030_rtc_set_time(struct device *dev, struct rtc_time *tm) +{ + unsigned char save_control; + unsigned char rtc_data[ALL_TIME_REGS + 1]; + int ret; + + rtc_data[1] = bin2bcd(tm->tm_sec); + rtc_data[2] = bin2bcd(tm->tm_min); + rtc_data[3] = bin2bcd(tm->tm_hour); + rtc_data[4] = bin2bcd(tm->tm_mday); + rtc_data[5] = bin2bcd(tm->tm_mon + 1); + rtc_data[6] = bin2bcd(tm->tm_year - 100); + + /* Stop RTC while updating the TC registers */ + ret = twl4030_rtc_read_u8(&save_control, REG_RTC_CTRL_REG); + if (ret < 0) + goto out; + + save_control &= ~BIT_RTC_CTRL_REG_STOP_RTC_M; + twl4030_rtc_write_u8(save_control, REG_RTC_CTRL_REG); + if (ret < 0) + goto out; + + /* update all the time registers in one shot */ + ret = twl4030_i2c_write(TWL4030_MODULE_RTC, rtc_data, + REG_SECONDS_REG, ALL_TIME_REGS); + if (ret < 0) { + dev_err(dev, "rtc_set_time error %d\n", ret); + goto out; + } + + /* Start back RTC */ + save_control |= BIT_RTC_CTRL_REG_STOP_RTC_M; + ret = twl4030_rtc_write_u8(save_control, REG_RTC_CTRL_REG); + +out: + return ret; +} + +/* + * Gets current TWL4030 RTC alarm time. + */ +static int twl4030_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *alm) +{ + unsigned char rtc_data[ALL_TIME_REGS + 1]; + int ret; + + ret = twl4030_i2c_read(TWL4030_MODULE_RTC, rtc_data, + REG_ALARM_SECONDS_REG, ALL_TIME_REGS); + if (ret < 0) { + dev_err(dev, "rtc_read_alarm error %d\n", ret); + return ret; + } + + /* some of these fields may be wildcard/"match all" */ + alm->time.tm_sec = bcd2bin(rtc_data[0]); + alm->time.tm_min = bcd2bin(rtc_data[1]); + alm->time.tm_hour = bcd2bin(rtc_data[2]); + alm->time.tm_mday = bcd2bin(rtc_data[3]); + alm->time.tm_mon = bcd2bin(rtc_data[4]) - 1; + alm->time.tm_year = bcd2bin(rtc_data[5]) + 100; + + /* report cached alarm enable state */ + if (rtc_irq_bits & BIT_RTC_INTERRUPTS_REG_IT_ALARM_M) + alm->enabled = 1; + + return ret; +} + +static int twl4030_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *alm) +{ + unsigned char alarm_data[ALL_TIME_REGS + 1]; + int ret; + + ret = twl4030_rtc_alarm_irq_enable(dev, 0); + if (ret) + goto out; + + alarm_data[1] = bin2bcd(alm->time.tm_sec); + alarm_data[2] = bin2bcd(alm->time.tm_min); + alarm_data[3] = bin2bcd(alm->time.tm_hour); + alarm_data[4] = bin2bcd(alm->time.tm_mday); + alarm_data[5] = bin2bcd(alm->time.tm_mon + 1); + alarm_data[6] = bin2bcd(alm->time.tm_year - 100); + + /* update all the alarm registers in one shot */ + ret = twl4030_i2c_write(TWL4030_MODULE_RTC, alarm_data, + REG_ALARM_SECONDS_REG, ALL_TIME_REGS); + if (ret) { + dev_err(dev, "rtc_set_alarm error %d\n", ret); + goto out; + } + + if (alm->enabled) + ret = twl4030_rtc_alarm_irq_enable(dev, 1); +out: + return ret; +} + +static irqreturn_t twl4030_rtc_interrupt(int irq, void *rtc) +{ + unsigned long events = 0; + int ret = IRQ_NONE; + int res; + u8 rd_reg; + +#ifdef CONFIG_LOCKDEP + /* WORKAROUND for lockdep forcing IRQF_DISABLED on us, which + * we don't want and can't tolerate. Although it might be + * friendlier not to borrow this thread context... + */ + local_irq_enable(); +#endif + + res = twl4030_rtc_read_u8(&rd_reg, REG_RTC_STATUS_REG); + if (res) + goto out; + /* + * Figure out source of interrupt: ALARM or TIMER in RTC_STATUS_REG. + * only one (ALARM or RTC) interrupt source may be enabled + * at time, we also could check our results + * by reading RTS_INTERRUPTS_REGISTER[IT_TIMER,IT_ALARM] + */ + if (rd_reg & BIT_RTC_STATUS_REG_ALARM_M) + events |= RTC_IRQF | RTC_AF; + else + events |= RTC_IRQF | RTC_UF; + + res = twl4030_rtc_write_u8(rd_reg | BIT_RTC_STATUS_REG_ALARM_M, + REG_RTC_STATUS_REG); + if (res) + goto out; + + /* Clear on Read enabled. RTC_IT bit of TWL4030_INT_PWR_ISR1 + * needs 2 reads to clear the interrupt. One read is done in + * do_twl4030_pwrirq(). Doing the second read, to clear + * the bit. + * + * FIXME the reason PWR_ISR1 needs an extra read is that + * RTC_IF retriggered until we cleared REG_ALARM_M above. + * But re-reading like this is a bad hack; by doing so we + * risk wrongly clearing status for some other IRQ (losing + * the interrupt). Be smarter about handling RTC_UF ... + */ + res = twl4030_i2c_read_u8(TWL4030_MODULE_INT, + &rd_reg, TWL4030_INT_PWR_ISR1); + if (res) + goto out; + + /* Notify RTC core on event */ + rtc_update_irq(rtc, 1, events); + + ret = IRQ_HANDLED; +out: + return ret; +} + +static struct rtc_class_ops twl4030_rtc_ops = { + .read_time = twl4030_rtc_read_time, + .set_time = twl4030_rtc_set_time, + .read_alarm = twl4030_rtc_read_alarm, + .set_alarm = twl4030_rtc_set_alarm, + .alarm_irq_enable = twl4030_rtc_alarm_irq_enable, + .update_irq_enable = twl4030_rtc_update_irq_enable, +}; + +/*----------------------------------------------------------------------*/ + +static int __devinit twl4030_rtc_probe(struct platform_device *pdev) +{ + struct rtc_device *rtc; + int ret = 0; + int irq = platform_get_irq(pdev, 0); + u8 rd_reg; + + if (irq <= 0) + return -EINVAL; + + rtc = rtc_device_register(pdev->name, + &pdev->dev, &twl4030_rtc_ops, THIS_MODULE); + if (IS_ERR(rtc)) { + ret = PTR_ERR(rtc); + dev_err(&pdev->dev, "can't register RTC device, err %ld\n", + PTR_ERR(rtc)); + goto out0; + + } + + platform_set_drvdata(pdev, rtc); + + ret = twl4030_rtc_read_u8(&rd_reg, REG_RTC_STATUS_REG); + if (ret < 0) + goto out1; + + if (rd_reg & BIT_RTC_STATUS_REG_POWER_UP_M) + dev_warn(&pdev->dev, "Power up reset detected.\n"); + + if (rd_reg & BIT_RTC_STATUS_REG_ALARM_M) + dev_warn(&pdev->dev, "Pending Alarm interrupt detected.\n"); + + /* Clear RTC Power up reset and pending alarm interrupts */ + ret = twl4030_rtc_write_u8(rd_reg, REG_RTC_STATUS_REG); + if (ret < 0) + goto out1; + + ret = request_irq(irq, twl4030_rtc_interrupt, + IRQF_TRIGGER_RISING, + dev_name(&rtc->dev), rtc); + if (ret < 0) { + dev_err(&pdev->dev, "IRQ is not free.\n"); + goto out1; + } + + /* Check RTC module status, Enable if it is off */ + ret = twl4030_rtc_read_u8(&rd_reg, REG_RTC_CTRL_REG); + if (ret < 0) + goto out2; + + if (!(rd_reg & BIT_RTC_CTRL_REG_STOP_RTC_M)) { + dev_info(&pdev->dev, "Enabling TWL4030-RTC.\n"); + rd_reg = BIT_RTC_CTRL_REG_STOP_RTC_M; + ret = twl4030_rtc_write_u8(rd_reg, REG_RTC_CTRL_REG); + if (ret < 0) + goto out2; + } + + /* init cached IRQ enable bits */ + ret = twl4030_rtc_read_u8(&rtc_irq_bits, REG_RTC_INTERRUPTS_REG); + if (ret < 0) + goto out2; + + return ret; + +out2: + free_irq(irq, rtc); +out1: + rtc_device_unregister(rtc); +out0: + return ret; +} + +/* + * Disable all TWL4030 RTC module interrupts. + * Sets status flag to free. + */ +static int __devexit twl4030_rtc_remove(struct platform_device *pdev) +{ + /* leave rtc running, but disable irqs */ + struct rtc_device *rtc = platform_get_drvdata(pdev); + int irq = platform_get_irq(pdev, 0); + + mask_rtc_irq_bit(BIT_RTC_INTERRUPTS_REG_IT_ALARM_M); + mask_rtc_irq_bit(BIT_RTC_INTERRUPTS_REG_IT_TIMER_M); + + free_irq(irq, rtc); + + rtc_device_unregister(rtc); + platform_set_drvdata(pdev, NULL); + return 0; +} + +static void twl4030_rtc_shutdown(struct platform_device *pdev) +{ + /* mask timer interrupts, but leave alarm interrupts on to enable + power-on when alarm is triggered */ + mask_rtc_irq_bit(BIT_RTC_INTERRUPTS_REG_IT_TIMER_M); +} + +#ifdef CONFIG_PM + +static unsigned char irqstat; + +static int twl4030_rtc_suspend(struct platform_device *pdev, pm_message_t state) +{ + irqstat = rtc_irq_bits; + + mask_rtc_irq_bit(BIT_RTC_INTERRUPTS_REG_IT_TIMER_M); + return 0; +} + +static int twl4030_rtc_resume(struct platform_device *pdev) +{ + set_rtc_irq_bit(irqstat); + return 0; +} + +#else +#define twl4030_rtc_suspend NULL +#define twl4030_rtc_resume NULL +#endif + +MODULE_ALIAS("platform:twl4030_rtc"); + +static struct platform_driver twl4030rtc_driver = { + .probe = twl4030_rtc_probe, + .remove = __devexit_p(twl4030_rtc_remove), + .shutdown = twl4030_rtc_shutdown, + .suspend = twl4030_rtc_suspend, + .resume = twl4030_rtc_resume, + .driver = { + .owner = THIS_MODULE, + .name = "twl4030_rtc", + }, +}; + +static int __init twl4030_rtc_init(void) +{ + return platform_driver_register(&twl4030rtc_driver); +} +module_init(twl4030_rtc_init); + +static void __exit twl4030_rtc_exit(void) +{ + platform_driver_unregister(&twl4030rtc_driver); +} +module_exit(twl4030_rtc_exit); + +MODULE_AUTHOR("Texas Instruments, MontaVista Software"); +MODULE_LICENSE("GPL"); -- cgit v1.2.3-70-g09d2 From fc7b92fca4e546184557f1c53f84ad57c66b7695 Mon Sep 17 00:00:00 2001 From: Balaji T K Date: Sun, 13 Dec 2009 21:23:33 +0100 Subject: mfd: Rename all twl4030_i2c* This patch renames function names like twl4030_i2c_write_u8, twl4030_i2c_read_u8 to twl_i2c_write_u8, twl_i2c_read_u8 and also common variable in twl-core.c Signed-off-by: Rajendra Nayak Signed-off-by: Balaji T K Signed-off-by: Santosh Shilimkar Acked-by: Kevin Hilman Signed-off-by: Samuel Ortiz --- drivers/gpio/twl4030-gpio.c | 18 ++--- drivers/input/keyboard/twl4030_keypad.c | 4 +- drivers/input/misc/twl4030-pwrbutton.c | 2 +- drivers/mfd/twl-core.c | 136 +++++++++++++++++--------------- drivers/mfd/twl4030-irq.c | 18 ++--- drivers/mfd/twl4030-power.c | 68 ++++++++-------- drivers/regulator/twl-regulator.c | 8 +- drivers/rtc/rtc-twl.c | 14 ++-- drivers/usb/otg/twl4030-usb.c | 36 ++++----- drivers/video/omap/lcd_2430sdp.c | 2 +- drivers/watchdog/twl4030_wdt.c | 2 +- include/linux/i2c/twl.h | 31 ++++++-- sound/soc/codecs/twl4030.c | 8 +- 13 files changed, 187 insertions(+), 160 deletions(-) (limited to 'drivers/rtc/rtc-twl.c') diff --git a/drivers/gpio/twl4030-gpio.c b/drivers/gpio/twl4030-gpio.c index a320d7bfe67..7fe881e2bdf 100644 --- a/drivers/gpio/twl4030-gpio.c +++ b/drivers/gpio/twl4030-gpio.c @@ -80,7 +80,7 @@ static unsigned int gpio_usage_count; */ static inline int gpio_twl4030_write(u8 address, u8 data) { - return twl4030_i2c_write_u8(TWL4030_MODULE_GPIO, data, address); + return twl_i2c_write_u8(TWL4030_MODULE_GPIO, data, address); } /*----------------------------------------------------------------------*/ @@ -117,7 +117,7 @@ static inline int gpio_twl4030_read(u8 address) u8 data; int ret = 0; - ret = twl4030_i2c_read_u8(TWL4030_MODULE_GPIO, &data, address); + ret = twl_i2c_read_u8(TWL4030_MODULE_GPIO, &data, address); return (ret < 0) ? ret : data; } @@ -142,7 +142,7 @@ static void twl4030_led_set_value(int led, int value) cached_leden &= ~mask; else cached_leden |= mask; - status = twl4030_i2c_write_u8(TWL4030_MODULE_LED, cached_leden, + status = twl_i2c_write_u8(TWL4030_MODULE_LED, cached_leden, TWL4030_LED_LEDEN); mutex_unlock(&gpio_lock); } @@ -223,23 +223,23 @@ static int twl_request(struct gpio_chip *chip, unsigned offset) } /* initialize PWM to always-drive */ - status = twl4030_i2c_write_u8(module, 0x7f, + status = twl_i2c_write_u8(module, 0x7f, TWL4030_PWMx_PWMxOFF); if (status < 0) goto done; - status = twl4030_i2c_write_u8(module, 0x7f, + status = twl_i2c_write_u8(module, 0x7f, TWL4030_PWMx_PWMxON); if (status < 0) goto done; /* init LED to not-driven (high) */ module = TWL4030_MODULE_LED; - status = twl4030_i2c_read_u8(module, &cached_leden, + status = twl_i2c_read_u8(module, &cached_leden, TWL4030_LED_LEDEN); if (status < 0) goto done; cached_leden &= ~ledclr_mask; - status = twl4030_i2c_write_u8(module, cached_leden, + status = twl_i2c_write_u8(module, cached_leden, TWL4030_LED_LEDEN); if (status < 0) goto done; @@ -370,7 +370,7 @@ static int __devinit gpio_twl4030_pulls(u32 ups, u32 downs) message[i] = bit_mask; } - return twl4030_i2c_write(TWL4030_MODULE_GPIO, message, + return twl_i2c_write(TWL4030_MODULE_GPIO, message, REG_GPIOPUPDCTR1, 5); } @@ -387,7 +387,7 @@ static int __devinit gpio_twl4030_debounce(u32 debounce, u8 mmc_cd) debounce >>= 8; message[3] = (debounce & 0x03); - return twl4030_i2c_write(TWL4030_MODULE_GPIO, message, + return twl_i2c_write(TWL4030_MODULE_GPIO, message, REG_GPIO_DEBEN1, 3); } diff --git a/drivers/input/keyboard/twl4030_keypad.c b/drivers/input/keyboard/twl4030_keypad.c index 1d1536a2fe4..eeaa7acb9cf 100644 --- a/drivers/input/keyboard/twl4030_keypad.c +++ b/drivers/input/keyboard/twl4030_keypad.c @@ -133,7 +133,7 @@ struct twl4030_keypad { static int twl4030_kpread(struct twl4030_keypad *kp, u8 *data, u32 reg, u8 num_bytes) { - int ret = twl4030_i2c_read(TWL4030_MODULE_KEYPAD, data, reg, num_bytes); + int ret = twl_i2c_read(TWL4030_MODULE_KEYPAD, data, reg, num_bytes); if (ret < 0) dev_warn(kp->dbg_dev, @@ -145,7 +145,7 @@ static int twl4030_kpread(struct twl4030_keypad *kp, static int twl4030_kpwrite_u8(struct twl4030_keypad *kp, u8 data, u32 reg) { - int ret = twl4030_i2c_write_u8(TWL4030_MODULE_KEYPAD, data, reg); + int ret = twl_i2c_write_u8(TWL4030_MODULE_KEYPAD, data, reg); if (ret < 0) dev_warn(kp->dbg_dev, diff --git a/drivers/input/misc/twl4030-pwrbutton.c b/drivers/input/misc/twl4030-pwrbutton.c index a73b889fff7..bdde5c88903 100644 --- a/drivers/input/misc/twl4030-pwrbutton.c +++ b/drivers/input/misc/twl4030-pwrbutton.c @@ -49,7 +49,7 @@ static irqreturn_t powerbutton_irq(int irq, void *_pwr) local_irq_enable(); #endif - err = twl4030_i2c_read_u8(TWL4030_MODULE_PM_MASTER, &value, + err = twl_i2c_read_u8(TWL4030_MODULE_PM_MASTER, &value, STS_HW_CONDITIONS); if (!err) { input_report_key(pwr, KEY_POWER, value & PWR_PWRON_IRQ); diff --git a/drivers/mfd/twl-core.c b/drivers/mfd/twl-core.c index 44714f5cf49..9021f44de2a 100644 --- a/drivers/mfd/twl-core.c +++ b/drivers/mfd/twl-core.c @@ -1,5 +1,6 @@ /* - * twl4030_core.c - driver for TWL4030/TPS659x0 PM and audio CODEC devices + * twl_core.c - driver for TWL4030/TWL5030/TWL60X0/TPS659x0 PM + * and audio CODEC devices * * Copyright (C) 2005-2006 Texas Instruments, Inc. * @@ -55,7 +56,7 @@ * (and associated registers). */ -#define DRIVER_NAME "twl4030" +#define DRIVER_NAME "twl" #if defined(CONFIG_TWL4030_BCI_BATTERY) || \ defined(CONFIG_TWL4030_BCI_BATTERY_MODULE) @@ -125,7 +126,7 @@ /* Last - for index max*/ #define TWL4030_MODULE_LAST TWL4030_MODULE_SECURED_REG -#define TWL4030_NUM_SLAVES 4 +#define TWL_NUM_SLAVES 4 #if defined(CONFIG_INPUT_TWL4030_PWRBUTTON) \ || defined(CONFIG_INPUT_TWL4030_PWBUTTON_MODULE) @@ -134,6 +135,13 @@ #define twl_has_pwrbutton() false #endif +#define SUB_CHIP_ID0 0 +#define SUB_CHIP_ID1 1 +#define SUB_CHIP_ID2 2 +#define SUB_CHIP_ID3 3 + +#define TWL_MODULE_LAST TWL4030_MODULE_LAST + /* Base Address defns for twl4030_map[] */ /* subchip/slave 0 - USB ID */ @@ -201,7 +209,7 @@ static bool inuse; /* Structure for each TWL4030 Slave */ -struct twl4030_client { +struct twl_client { struct i2c_client *client; u8 address; @@ -212,16 +220,16 @@ struct twl4030_client { struct mutex xfer_lock; }; -static struct twl4030_client twl4030_modules[TWL4030_NUM_SLAVES]; +static struct twl_client twl_modules[TWL_NUM_SLAVES]; /* mapping the module id to slave id and base address */ -struct twl4030mapping { +struct twl_mapping { unsigned char sid; /* Slave ID */ unsigned char base; /* base address */ }; -static struct twl4030mapping twl4030_map[TWL4030_MODULE_LAST + 1] = { +static struct twl_mapping twl4030_map[TWL4030_MODULE_LAST + 1] = { /* * NOTE: don't change this table without updating the * defines for TWL4030_MODULE_* @@ -262,7 +270,7 @@ static struct twl4030mapping twl4030_map[TWL4030_MODULE_LAST + 1] = { /* Exported Functions */ /** - * twl4030_i2c_write - Writes a n bit register in TWL4030 + * twl_i2c_write - Writes a n bit register in TWL4030/TWL5030/TWL60X0 * @mod_no: module number * @value: an array of num_bytes+1 containing data to write * @reg: register address (just offset will do) @@ -273,19 +281,19 @@ static struct twl4030mapping twl4030_map[TWL4030_MODULE_LAST + 1] = { * * Returns the result of operation - 0 is success */ -int twl4030_i2c_write(u8 mod_no, u8 *value, u8 reg, unsigned num_bytes) +int twl_i2c_write(u8 mod_no, u8 *value, u8 reg, unsigned num_bytes) { int ret; int sid; - struct twl4030_client *twl; + struct twl_client *twl; struct i2c_msg *msg; - if (unlikely(mod_no > TWL4030_MODULE_LAST)) { + if (unlikely(mod_no > TWL_MODULE_LAST)) { pr_err("%s: invalid module number %d\n", DRIVER_NAME, mod_no); return -EPERM; } sid = twl4030_map[mod_no].sid; - twl = &twl4030_modules[sid]; + twl = &twl_modules[sid]; if (unlikely(!inuse)) { pr_err("%s: client %d is not initialized\n", DRIVER_NAME, sid); @@ -318,10 +326,10 @@ int twl4030_i2c_write(u8 mod_no, u8 *value, u8 reg, unsigned num_bytes) return 0; } } -EXPORT_SYMBOL(twl4030_i2c_write); +EXPORT_SYMBOL(twl_i2c_write); /** - * twl4030_i2c_read - Reads a n bit register in TWL4030 + * twl_i2c_read - Reads a n bit register in TWL4030/TWL5030/TWL60X0 * @mod_no: module number * @value: an array of num_bytes containing data to be read * @reg: register address (just offset will do) @@ -329,20 +337,20 @@ EXPORT_SYMBOL(twl4030_i2c_write); * * Returns result of operation - num_bytes is success else failure. */ -int twl4030_i2c_read(u8 mod_no, u8 *value, u8 reg, unsigned num_bytes) +int twl_i2c_read(u8 mod_no, u8 *value, u8 reg, unsigned num_bytes) { int ret; u8 val; int sid; - struct twl4030_client *twl; + struct twl_client *twl; struct i2c_msg *msg; - if (unlikely(mod_no > TWL4030_MODULE_LAST)) { + if (unlikely(mod_no > TWL_MODULE_LAST)) { pr_err("%s: invalid module number %d\n", DRIVER_NAME, mod_no); return -EPERM; } sid = twl4030_map[mod_no].sid; - twl = &twl4030_modules[sid]; + twl = &twl_modules[sid]; if (unlikely(!inuse)) { pr_err("%s: client %d is not initialized\n", DRIVER_NAME, sid); @@ -377,40 +385,40 @@ int twl4030_i2c_read(u8 mod_no, u8 *value, u8 reg, unsigned num_bytes) return 0; } } -EXPORT_SYMBOL(twl4030_i2c_read); +EXPORT_SYMBOL(twl_i2c_read); /** - * twl4030_i2c_write_u8 - Writes a 8 bit register in TWL4030 + * twl_i2c_write_u8 - Writes a 8 bit register in TWL4030/TWL5030/TWL60X0 * @mod_no: module number * @value: the value to be written 8 bit * @reg: register address (just offset will do) * * Returns result of operation - 0 is success */ -int twl4030_i2c_write_u8(u8 mod_no, u8 value, u8 reg) +int twl_i2c_write_u8(u8 mod_no, u8 value, u8 reg) { /* 2 bytes offset 1 contains the data offset 0 is used by i2c_write */ u8 temp_buffer[2] = { 0 }; /* offset 1 contains the data */ temp_buffer[1] = value; - return twl4030_i2c_write(mod_no, temp_buffer, reg, 1); + return twl_i2c_write(mod_no, temp_buffer, reg, 1); } -EXPORT_SYMBOL(twl4030_i2c_write_u8); +EXPORT_SYMBOL(twl_i2c_write_u8); /** - * twl4030_i2c_read_u8 - Reads a 8 bit register from TWL4030 + * twl_i2c_read_u8 - Reads a 8 bit register from TWL4030/TWL5030/TWL60X0 * @mod_no: module number * @value: the value read 8 bit * @reg: register address (just offset will do) * * Returns result of operation - 0 is success */ -int twl4030_i2c_read_u8(u8 mod_no, u8 *value, u8 reg) +int twl_i2c_read_u8(u8 mod_no, u8 *value, u8 reg) { - return twl4030_i2c_read(mod_no, value, reg, 1); + return twl_i2c_read(mod_no, value, reg, 1); } -EXPORT_SYMBOL(twl4030_i2c_read_u8); +EXPORT_SYMBOL(twl_i2c_read_u8); /*----------------------------------------------------------------------*/ @@ -420,7 +428,7 @@ add_numbered_child(unsigned chip, const char *name, int num, bool can_wakeup, int irq0, int irq1) { struct platform_device *pdev; - struct twl4030_client *twl = &twl4030_modules[chip]; + struct twl_client *twl = &twl_modules[chip]; int status; pdev = platform_device_alloc(name, num); @@ -515,23 +523,24 @@ add_children(struct twl4030_platform_data *pdata, unsigned long features) pdata->bci, sizeof(*pdata->bci), false, /* irq0 = CHG_PRES, irq1 = BCI */ - pdata->irq_base + 8 + 1, pdata->irq_base + 2); + pdata->irq_base + BCI_PRES_INTR_OFFSET, + pdata->irq_base + BCI_INTR_OFFSET); if (IS_ERR(child)) return PTR_ERR(child); } if (twl_has_gpio() && pdata->gpio) { - child = add_child(1, "twl4030_gpio", + child = add_child(SUB_CHIP_ID1, "twl4030_gpio", pdata->gpio, sizeof(*pdata->gpio), - false, pdata->irq_base + 0, 0); + false, pdata->irq_base + GPIO_INTR_OFFSET, 0); if (IS_ERR(child)) return PTR_ERR(child); } if (twl_has_keypad() && pdata->keypad) { - child = add_child(2, "twl4030_keypad", + child = add_child(SUB_CHIP_ID2, "twl4030_keypad", pdata->keypad, sizeof(*pdata->keypad), - true, pdata->irq_base + 1, 0); + true, pdata->irq_base + KEYPAD_INTR_OFFSET, 0); if (IS_ERR(child)) return PTR_ERR(child); } @@ -539,7 +548,7 @@ add_children(struct twl4030_platform_data *pdata, unsigned long features) if (twl_has_madc() && pdata->madc) { child = add_child(2, "twl4030_madc", pdata->madc, sizeof(*pdata->madc), - true, pdata->irq_base + 3, 0); + true, pdata->irq_base + MADC_INTR_OFFSET, 0); if (IS_ERR(child)) return PTR_ERR(child); } @@ -554,7 +563,7 @@ add_children(struct twl4030_platform_data *pdata, unsigned long features) */ child = add_child(3, "twl4030_rtc", NULL, 0, - true, pdata->irq_base + 8 + 3, 0); + true, pdata->irq_base + RTC_INTR_OFFSET, 0); if (IS_ERR(child)) return PTR_ERR(child); } @@ -604,7 +613,8 @@ add_children(struct twl4030_platform_data *pdata, unsigned long features) pdata->usb, sizeof(*pdata->usb), true, /* irq0 = USB_PRES, irq1 = USB */ - pdata->irq_base + 8 + 2, pdata->irq_base + 4); + pdata->irq_base + USB_PRES_INTR_OFFSET, + pdata->irq_base + USB_INTR_OFFSET); if (IS_ERR(child)) return PTR_ERR(child); @@ -724,7 +734,7 @@ static inline int __init protect_pm_master(void) { int e = 0; - e = twl4030_i2c_write_u8(TWL4030_MODULE_PM_MASTER, KEY_LOCK, + e = twl_i2c_write_u8(TWL_MODULE_PM_MASTER, KEY_LOCK, R_PROTECT_KEY); return e; } @@ -733,9 +743,9 @@ static inline int __init unprotect_pm_master(void) { int e = 0; - e |= twl4030_i2c_write_u8(TWL4030_MODULE_PM_MASTER, KEY_UNLOCK1, + e |= twl_i2c_write_u8(TWL_MODULE_PM_MASTER, KEY_UNLOCK1, R_PROTECT_KEY); - e |= twl4030_i2c_write_u8(TWL4030_MODULE_PM_MASTER, KEY_UNLOCK2, + e |= twl_i2c_write_u8(TWL_MODULE_PM_MASTER, KEY_UNLOCK2, R_PROTECT_KEY); return e; } @@ -755,7 +765,7 @@ static void clocks_init(struct device *dev, osc = clk_get(dev, "osc_sys_ck"); if (IS_ERR(osc)) { - printk(KERN_WARNING "Skipping twl4030 internal clock init and " + printk(KERN_WARNING "Skipping twl internal clock init and " "using bootloader value (unknown osc rate)\n"); return; } @@ -769,7 +779,7 @@ static void clocks_init(struct device *dev, */ osc = ERR_PTR(-EIO); - printk(KERN_WARNING "Skipping twl4030 internal clock init and " + printk(KERN_WARNING "Skipping twl internal clock init and " "using bootloader value (unknown osc rate)\n"); return; @@ -793,7 +803,7 @@ static void clocks_init(struct device *dev, e |= unprotect_pm_master(); /* effect->MADC+USB ck en */ - e |= twl4030_i2c_write_u8(TWL4030_MODULE_PM_MASTER, ctrl, R_CFG_BOOT); + e |= twl_i2c_write_u8(TWL_MODULE_PM_MASTER, ctrl, R_CFG_BOOT); e |= protect_pm_master(); if (e < 0) @@ -806,7 +816,7 @@ int twl_init_irq(int irq_num, unsigned irq_base, unsigned irq_end); int twl_exit_irq(void); int twl_init_chip_irq(const char *chip); -static int twl4030_remove(struct i2c_client *client) +static int twl_remove(struct i2c_client *client) { unsigned i; int status; @@ -815,12 +825,12 @@ static int twl4030_remove(struct i2c_client *client) if (status < 0) return status; - for (i = 0; i < TWL4030_NUM_SLAVES; i++) { - struct twl4030_client *twl = &twl4030_modules[i]; + for (i = 0; i < TWL_NUM_SLAVES; i++) { + struct twl_client *twl = &twl_modules[i]; if (twl->client && twl->client != client) i2c_unregister_device(twl->client); - twl4030_modules[i].client = NULL; + twl_modules[i].client = NULL; } inuse = false; return 0; @@ -828,7 +838,7 @@ static int twl4030_remove(struct i2c_client *client) /* NOTE: this driver only handles a single twl4030/tps659x0 chip */ static int __init -twl4030_probe(struct i2c_client *client, const struct i2c_device_id *id) +twl_probe(struct i2c_client *client, const struct i2c_device_id *id) { int status; unsigned i; @@ -849,8 +859,8 @@ twl4030_probe(struct i2c_client *client, const struct i2c_device_id *id) return -EBUSY; } - for (i = 0; i < TWL4030_NUM_SLAVES; i++) { - struct twl4030_client *twl = &twl4030_modules[i]; + for (i = 0; i < TWL_NUM_SLAVES; i++) { + struct twl_client *twl = &twl_modules[i]; twl->address = client->addr + i; if (i == 0) @@ -889,11 +899,11 @@ twl4030_probe(struct i2c_client *client, const struct i2c_device_id *id) status = add_children(pdata, id->driver_data); fail: if (status < 0) - twl4030_remove(client); + twl_remove(client); return status; } -static const struct i2c_device_id twl4030_ids[] = { +static const struct i2c_device_id twl_ids[] = { { "twl4030", TWL4030_VAUX2 }, /* "Triton 2" */ { "twl5030", 0 }, /* T2 updated */ { "twl5031", TWL5031 }, /* TWL5030 updated */ @@ -902,28 +912,28 @@ static const struct i2c_device_id twl4030_ids[] = { { "tps65920", TPS_SUBSET }, /* fewer LDOs; no codec or charger */ { /* end of list */ }, }; -MODULE_DEVICE_TABLE(i2c, twl4030_ids); +MODULE_DEVICE_TABLE(i2c, twl_ids); /* One Client Driver , 4 Clients */ -static struct i2c_driver twl4030_driver = { +static struct i2c_driver twl_driver = { .driver.name = DRIVER_NAME, - .id_table = twl4030_ids, - .probe = twl4030_probe, - .remove = twl4030_remove, + .id_table = twl_ids, + .probe = twl_probe, + .remove = twl_remove, }; -static int __init twl4030_init(void) +static int __init twl_init(void) { - return i2c_add_driver(&twl4030_driver); + return i2c_add_driver(&twl_driver); } -subsys_initcall(twl4030_init); +subsys_initcall(twl_init); -static void __exit twl4030_exit(void) +static void __exit twl_exit(void) { - i2c_del_driver(&twl4030_driver); + i2c_del_driver(&twl_driver); } -module_exit(twl4030_exit); +module_exit(twl_exit); MODULE_AUTHOR("Texas Instruments, Inc."); -MODULE_DESCRIPTION("I2C Core interface for TWL4030"); +MODULE_DESCRIPTION("I2C Core interface for TWL"); MODULE_LICENSE("GPL"); diff --git a/drivers/mfd/twl4030-irq.c b/drivers/mfd/twl4030-irq.c index c4528db549c..5a62cf91698 100644 --- a/drivers/mfd/twl4030-irq.c +++ b/drivers/mfd/twl4030-irq.c @@ -296,7 +296,7 @@ static int twl4030_irq_thread(void *data) /* Wait for IRQ, then read PIH irq status (also blocking) */ wait_for_completion_interruptible(&irq_event); - ret = twl4030_i2c_read_u8(TWL4030_MODULE_PIH, &pih_isr, + ret = twl_i2c_read_u8(TWL4030_MODULE_PIH, &pih_isr, REG_PIH_ISR_P1); if (ret) { pr_warning("twl4030: I2C error %d reading PIH ISR\n", @@ -396,7 +396,7 @@ static int twl4030_init_sih_modules(unsigned line) if (sih->irq_lines <= line) continue; - status = twl4030_i2c_write(sih->module, buf, + status = twl_i2c_write(sih->module, buf, sih->mask[line].imr_offset, sih->bytes_ixr); if (status < 0) pr_err("twl4030: err %d initializing %s %s\n", @@ -410,7 +410,7 @@ static int twl4030_init_sih_modules(unsigned line) * And for PWR_INT it's not documented... */ if (sih->set_cor) { - status = twl4030_i2c_write_u8(sih->module, + status = twl_i2c_write_u8(sih->module, TWL4030_SIH_CTRL_COR_MASK, sih->control_offset); if (status < 0) @@ -438,14 +438,14 @@ static int twl4030_init_sih_modules(unsigned line) * uncommon with PWR_INT.PWRON. */ for (j = 0; j < 2; j++) { - status = twl4030_i2c_read(sih->module, rxbuf, + status = twl_i2c_read(sih->module, rxbuf, sih->mask[line].isr_offset, sih->bytes_ixr); if (status < 0) pr_err("twl4030: err %d initializing %s %s\n", status, sih->name, "ISR"); if (!sih->set_cor) - status = twl4030_i2c_write(sih->module, buf, + status = twl_i2c_write(sih->module, buf, sih->mask[line].isr_offset, sih->bytes_ixr); /* else COR=1 means read sufficed. @@ -514,7 +514,7 @@ static void twl4030_sih_do_mask(struct work_struct *work) return; /* write the whole mask ... simpler than subsetting it */ - status = twl4030_i2c_write(sih->module, imr.bytes, + status = twl_i2c_write(sih->module, imr.bytes, sih->mask[irq_line].imr_offset, sih->bytes_ixr); if (status) pr_err("twl4030: %s, %s --> %d\n", __func__, @@ -545,7 +545,7 @@ static void twl4030_sih_do_edge(struct work_struct *work) * any processor on the other IRQ line, EDR registers are * shared. */ - status = twl4030_i2c_read(sih->module, bytes + 1, + status = twl_i2c_read(sih->module, bytes + 1, sih->edr_offset, sih->bytes_edr); if (status) { pr_err("twl4030: %s, %s --> %d\n", __func__, @@ -579,7 +579,7 @@ static void twl4030_sih_do_edge(struct work_struct *work) } /* Write */ - status = twl4030_i2c_write(sih->module, bytes, + status = twl_i2c_write(sih->module, bytes, sih->edr_offset, sih->bytes_edr); if (status) pr_err("twl4030: %s, %s --> %d\n", __func__, @@ -664,7 +664,7 @@ static inline int sih_read_isr(const struct sih *sih) /* FIXME need retry-on-error ... */ isr.word = 0; - status = twl4030_i2c_read(sih->module, isr.bytes, + status = twl_i2c_read(sih->module, isr.bytes, sih->mask[irq_line].isr_offset, sih->bytes_ixr); return (status < 0) ? status : le32_to_cpu(isr.word); diff --git a/drivers/mfd/twl4030-power.c b/drivers/mfd/twl4030-power.c index 424b255d6f9..0815292fdaf 100644 --- a/drivers/mfd/twl4030-power.c +++ b/drivers/mfd/twl4030-power.c @@ -131,11 +131,11 @@ static int __init twl4030_write_script_byte(u8 address, u8 byte) { int err; - err = twl4030_i2c_write_u8(TWL4030_MODULE_PM_MASTER, address, + err = twl_i2c_write_u8(TWL4030_MODULE_PM_MASTER, address, R_MEMORY_ADDRESS); if (err) goto out; - err = twl4030_i2c_write_u8(TWL4030_MODULE_PM_MASTER, byte, + err = twl_i2c_write_u8(TWL4030_MODULE_PM_MASTER, byte, R_MEMORY_DATA); out: return err; @@ -192,18 +192,18 @@ static int __init twl4030_config_wakeup3_sequence(u8 address) u8 data; /* Set SLEEP to ACTIVE SEQ address for P3 */ - err = twl4030_i2c_write_u8(TWL4030_MODULE_PM_MASTER, address, + err = twl_i2c_write_u8(TWL4030_MODULE_PM_MASTER, address, R_SEQ_ADD_S2A3); if (err) goto out; /* P3 LVL_WAKEUP should be on LEVEL */ - err = twl4030_i2c_read_u8(TWL4030_MODULE_PM_MASTER, &data, + err = twl_i2c_read_u8(TWL4030_MODULE_PM_MASTER, &data, R_P3_SW_EVENTS); if (err) goto out; data |= LVL_WAKEUP; - err = twl4030_i2c_write_u8(TWL4030_MODULE_PM_MASTER, data, + err = twl_i2c_write_u8(TWL4030_MODULE_PM_MASTER, data, R_P3_SW_EVENTS); out: if (err) @@ -217,42 +217,42 @@ static int __init twl4030_config_wakeup12_sequence(u8 address) u8 data; /* Set SLEEP to ACTIVE SEQ address for P1 and P2 */ - err = twl4030_i2c_write_u8(TWL4030_MODULE_PM_MASTER, address, + err = twl_i2c_write_u8(TWL4030_MODULE_PM_MASTER, address, R_SEQ_ADD_S2A12); if (err) goto out; /* P1/P2 LVL_WAKEUP should be on LEVEL */ - err = twl4030_i2c_read_u8(TWL4030_MODULE_PM_MASTER, &data, + err = twl_i2c_read_u8(TWL4030_MODULE_PM_MASTER, &data, R_P1_SW_EVENTS); if (err) goto out; data |= LVL_WAKEUP; - err = twl4030_i2c_write_u8(TWL4030_MODULE_PM_MASTER, data, + err = twl_i2c_write_u8(TWL4030_MODULE_PM_MASTER, data, R_P1_SW_EVENTS); if (err) goto out; - err = twl4030_i2c_read_u8(TWL4030_MODULE_PM_MASTER, &data, + err = twl_i2c_read_u8(TWL4030_MODULE_PM_MASTER, &data, R_P2_SW_EVENTS); if (err) goto out; data |= LVL_WAKEUP; - err = twl4030_i2c_write_u8(TWL4030_MODULE_PM_MASTER, data, + err = twl_i2c_write_u8(TWL4030_MODULE_PM_MASTER, data, R_P2_SW_EVENTS); if (err) goto out; if (machine_is_omap_3430sdp() || machine_is_omap_ldp()) { /* Disabling AC charger effect on sleep-active transitions */ - err = twl4030_i2c_read_u8(TWL4030_MODULE_PM_MASTER, &data, + err = twl_i2c_read_u8(TWL4030_MODULE_PM_MASTER, &data, R_CFG_P1_TRANSITION); if (err) goto out; data &= ~(1<<1); - err = twl4030_i2c_write_u8(TWL4030_MODULE_PM_MASTER, data , + err = twl_i2c_write_u8(TWL4030_MODULE_PM_MASTER, data , R_CFG_P1_TRANSITION); if (err) goto out; @@ -270,7 +270,7 @@ static int __init twl4030_config_sleep_sequence(u8 address) int err; /* Set ACTIVE to SLEEP SEQ address in T2 memory*/ - err = twl4030_i2c_write_u8(TWL4030_MODULE_PM_MASTER, address, + err = twl_i2c_write_u8(TWL4030_MODULE_PM_MASTER, address, R_SEQ_ADD_A2S); if (err) @@ -285,41 +285,41 @@ static int __init twl4030_config_warmreset_sequence(u8 address) u8 rd_data; /* Set WARM RESET SEQ address for P1 */ - err = twl4030_i2c_write_u8(TWL4030_MODULE_PM_MASTER, address, + err = twl_i2c_write_u8(TWL4030_MODULE_PM_MASTER, address, R_SEQ_ADD_WARM); if (err) goto out; /* P1/P2/P3 enable WARMRESET */ - err = twl4030_i2c_read_u8(TWL4030_MODULE_PM_MASTER, &rd_data, + err = twl_i2c_read_u8(TWL4030_MODULE_PM_MASTER, &rd_data, R_P1_SW_EVENTS); if (err) goto out; rd_data |= ENABLE_WARMRESET; - err = twl4030_i2c_write_u8(TWL4030_MODULE_PM_MASTER, rd_data, + err = twl_i2c_write_u8(TWL4030_MODULE_PM_MASTER, rd_data, R_P1_SW_EVENTS); if (err) goto out; - err = twl4030_i2c_read_u8(TWL4030_MODULE_PM_MASTER, &rd_data, + err = twl_i2c_read_u8(TWL4030_MODULE_PM_MASTER, &rd_data, R_P2_SW_EVENTS); if (err) goto out; rd_data |= ENABLE_WARMRESET; - err = twl4030_i2c_write_u8(TWL4030_MODULE_PM_MASTER, rd_data, + err = twl_i2c_write_u8(TWL4030_MODULE_PM_MASTER, rd_data, R_P2_SW_EVENTS); if (err) goto out; - err = twl4030_i2c_read_u8(TWL4030_MODULE_PM_MASTER, &rd_data, + err = twl_i2c_read_u8(TWL4030_MODULE_PM_MASTER, &rd_data, R_P3_SW_EVENTS); if (err) goto out; rd_data |= ENABLE_WARMRESET; - err = twl4030_i2c_write_u8(TWL4030_MODULE_PM_MASTER, rd_data, + err = twl_i2c_write_u8(TWL4030_MODULE_PM_MASTER, rd_data, R_P3_SW_EVENTS); out: if (err) @@ -344,8 +344,8 @@ static int __init twl4030_configure_resource(struct twl4030_resconfig *rconfig) rconfig_addr = res_config_addrs[rconfig->resource]; /* Set resource group */ - err = twl4030_i2c_read_u8(TWL4030_MODULE_PM_RECEIVER, &grp, - rconfig_addr + DEV_GRP_OFFSET); + err = twl_i2c_read_u8(TWL4030_MODULE_PM_RECEIVER, &grp, + rconfig_addr + DEV_GRP_OFFSET); if (err) { pr_err("TWL4030 Resource %d group could not be read\n", rconfig->resource); @@ -355,8 +355,8 @@ static int __init twl4030_configure_resource(struct twl4030_resconfig *rconfig) if (rconfig->devgroup != TWL4030_RESCONFIG_UNDEF) { grp &= ~DEV_GRP_MASK; grp |= rconfig->devgroup << DEV_GRP_SHIFT; - err = twl4030_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER, - grp, rconfig_addr + DEV_GRP_OFFSET); + err = twl_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER, + grp, rconfig_addr + DEV_GRP_OFFSET); if (err < 0) { pr_err("TWL4030 failed to program devgroup\n"); return err; @@ -364,7 +364,7 @@ static int __init twl4030_configure_resource(struct twl4030_resconfig *rconfig) } /* Set resource types */ - err = twl4030_i2c_read_u8(TWL4030_MODULE_PM_RECEIVER, &type, + err = twl_i2c_read_u8(TWL4030_MODULE_PM_RECEIVER, &type, rconfig_addr + TYPE_OFFSET); if (err < 0) { pr_err("TWL4030 Resource %d type could not be read\n", @@ -382,7 +382,7 @@ static int __init twl4030_configure_resource(struct twl4030_resconfig *rconfig) type |= rconfig->type2 << TYPE2_SHIFT; } - err = twl4030_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER, + err = twl_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER, type, rconfig_addr + TYPE_OFFSET); if (err < 0) { pr_err("TWL4030 failed to program resource type\n"); @@ -390,8 +390,8 @@ static int __init twl4030_configure_resource(struct twl4030_resconfig *rconfig) } /* Set remap states */ - err = twl4030_i2c_read_u8(TWL4030_MODULE_PM_RECEIVER, &remap, - rconfig_addr + REMAP_OFFSET); + err = twl_i2c_read_u8(TWL4030_MODULE_PM_RECEIVER, &remap, + rconfig_addr + REMAP_OFFSET); if (err < 0) { pr_err("TWL4030 Resource %d remap could not be read\n", rconfig->resource); @@ -408,9 +408,9 @@ static int __init twl4030_configure_resource(struct twl4030_resconfig *rconfig) remap |= rconfig->remap_off << SLEEP_STATE_SHIFT; } - err = twl4030_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER, - remap, - rconfig_addr + REMAP_OFFSET); + err = twl_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER, + remap, + rconfig_addr + REMAP_OFFSET); if (err < 0) { pr_err("TWL4030 failed to program remap\n"); return err; @@ -468,12 +468,12 @@ void __init twl4030_power_init(struct twl4030_power_data *twl4030_scripts) struct twl4030_resconfig *resconfig; u8 address = twl4030_start_script_address; - err = twl4030_i2c_write_u8(TWL4030_MODULE_PM_MASTER, R_KEY_1, + err = twl_i2c_write_u8(TWL4030_MODULE_PM_MASTER, R_KEY_1, R_PROTECT_KEY); if (err) goto unlock; - err = twl4030_i2c_write_u8(TWL4030_MODULE_PM_MASTER, R_KEY_2, + err = twl_i2c_write_u8(TWL4030_MODULE_PM_MASTER, R_KEY_2, R_PROTECT_KEY); if (err) goto unlock; @@ -496,7 +496,7 @@ void __init twl4030_power_init(struct twl4030_power_data *twl4030_scripts) } } - err = twl4030_i2c_write_u8(TWL4030_MODULE_PM_MASTER, 0, R_PROTECT_KEY); + err = twl_i2c_write_u8(TWL4030_MODULE_PM_MASTER, 0, R_PROTECT_KEY); if (err) pr_err("TWL4030 Unable to relock registers\n"); return; diff --git a/drivers/regulator/twl-regulator.c b/drivers/regulator/twl-regulator.c index c8a6e583d77..8cc46e99ccc 100644 --- a/drivers/regulator/twl-regulator.c +++ b/drivers/regulator/twl-regulator.c @@ -64,7 +64,7 @@ twl4030reg_read(struct twlreg_info *info, unsigned offset) u8 value; int status; - status = twl4030_i2c_read_u8(TWL4030_MODULE_PM_RECEIVER, + status = twl_i2c_read_u8(TWL4030_MODULE_PM_RECEIVER, &value, info->base + offset); return (status < 0) ? status : value; } @@ -72,7 +72,7 @@ twl4030reg_read(struct twlreg_info *info, unsigned offset) static inline int twl4030reg_write(struct twlreg_info *info, unsigned offset, u8 value) { - return twl4030_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER, + return twl_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER, value, info->base + offset); } @@ -171,12 +171,12 @@ static int twl4030reg_set_mode(struct regulator_dev *rdev, unsigned mode) if (!(status & (P3_GRP | P2_GRP | P1_GRP))) return -EACCES; - status = twl4030_i2c_write_u8(TWL4030_MODULE_PM_MASTER, + status = twl_i2c_write_u8(TWL4030_MODULE_PM_MASTER, message >> 8, 0x15 /* PB_WORD_MSB */ ); if (status >= 0) return status; - return twl4030_i2c_write_u8(TWL4030_MODULE_PM_MASTER, + return twl_i2c_write_u8(TWL4030_MODULE_PM_MASTER, message, 0x16 /* PB_WORD_LSB */ ); } diff --git a/drivers/rtc/rtc-twl.c b/drivers/rtc/rtc-twl.c index 93565be12fa..6119712cc8d 100644 --- a/drivers/rtc/rtc-twl.c +++ b/drivers/rtc/rtc-twl.c @@ -92,7 +92,7 @@ static int twl4030_rtc_read_u8(u8 *data, u8 reg) { int ret; - ret = twl4030_i2c_read_u8(TWL4030_MODULE_RTC, data, reg); + ret = twl_i2c_read_u8(TWL4030_MODULE_RTC, data, reg); if (ret < 0) pr_err("twl4030_rtc: Could not read TWL4030" "register %X - error %d\n", reg, ret); @@ -106,7 +106,7 @@ static int twl4030_rtc_write_u8(u8 data, u8 reg) { int ret; - ret = twl4030_i2c_write_u8(TWL4030_MODULE_RTC, data, reg); + ret = twl_i2c_write_u8(TWL4030_MODULE_RTC, data, reg); if (ret < 0) pr_err("twl4030_rtc: Could not write TWL4030" "register %X - error %d\n", reg, ret); @@ -201,7 +201,7 @@ static int twl4030_rtc_read_time(struct device *dev, struct rtc_time *tm) if (ret < 0) return ret; - ret = twl4030_i2c_read(TWL4030_MODULE_RTC, rtc_data, + ret = twl_i2c_read(TWL4030_MODULE_RTC, rtc_data, REG_SECONDS_REG, ALL_TIME_REGS); if (ret < 0) { @@ -243,7 +243,7 @@ static int twl4030_rtc_set_time(struct device *dev, struct rtc_time *tm) goto out; /* update all the time registers in one shot */ - ret = twl4030_i2c_write(TWL4030_MODULE_RTC, rtc_data, + ret = twl_i2c_write(TWL4030_MODULE_RTC, rtc_data, REG_SECONDS_REG, ALL_TIME_REGS); if (ret < 0) { dev_err(dev, "rtc_set_time error %d\n", ret); @@ -266,7 +266,7 @@ static int twl4030_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *alm) unsigned char rtc_data[ALL_TIME_REGS + 1]; int ret; - ret = twl4030_i2c_read(TWL4030_MODULE_RTC, rtc_data, + ret = twl_i2c_read(TWL4030_MODULE_RTC, rtc_data, REG_ALARM_SECONDS_REG, ALL_TIME_REGS); if (ret < 0) { dev_err(dev, "rtc_read_alarm error %d\n", ret); @@ -305,7 +305,7 @@ static int twl4030_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *alm) alarm_data[6] = bin2bcd(alm->time.tm_year - 100); /* update all the alarm registers in one shot */ - ret = twl4030_i2c_write(TWL4030_MODULE_RTC, alarm_data, + ret = twl_i2c_write(TWL4030_MODULE_RTC, alarm_data, REG_ALARM_SECONDS_REG, ALL_TIME_REGS); if (ret) { dev_err(dev, "rtc_set_alarm error %d\n", ret); @@ -363,7 +363,7 @@ static irqreturn_t twl4030_rtc_interrupt(int irq, void *rtc) * risk wrongly clearing status for some other IRQ (losing * the interrupt). Be smarter about handling RTC_UF ... */ - res = twl4030_i2c_read_u8(TWL4030_MODULE_INT, + res = twl_i2c_read_u8(TWL4030_MODULE_INT, &rd_reg, TWL4030_INT_PWR_ISR1); if (res) goto out; diff --git a/drivers/usb/otg/twl4030-usb.c b/drivers/usb/otg/twl4030-usb.c index 3acbdb82bcf..2be9f2fa41f 100644 --- a/drivers/usb/otg/twl4030-usb.c +++ b/drivers/usb/otg/twl4030-usb.c @@ -276,16 +276,16 @@ static int twl4030_i2c_write_u8_verify(struct twl4030_usb *twl, { u8 check; - if ((twl4030_i2c_write_u8(module, data, address) >= 0) && - (twl4030_i2c_read_u8(module, &check, address) >= 0) && + if ((twl_i2c_write_u8(module, data, address) >= 0) && + (twl_i2c_read_u8(module, &check, address) >= 0) && (check == data)) return 0; dev_dbg(twl->dev, "Write%d[%d,0x%x] wrote %02x but read %02x\n", 1, module, address, check, data); /* Failed once: Try again */ - if ((twl4030_i2c_write_u8(module, data, address) >= 0) && - (twl4030_i2c_read_u8(module, &check, address) >= 0) && + if ((twl_i2c_write_u8(module, data, address) >= 0) && + (twl_i2c_read_u8(module, &check, address) >= 0) && (check == data)) return 0; dev_dbg(twl->dev, "Write%d[%d,0x%x] wrote %02x but read %02x\n", @@ -303,7 +303,7 @@ static inline int twl4030_usb_write(struct twl4030_usb *twl, { int ret = 0; - ret = twl4030_i2c_write_u8(TWL4030_MODULE_USB, data, address); + ret = twl_i2c_write_u8(TWL4030_MODULE_USB, data, address); if (ret < 0) dev_dbg(twl->dev, "TWL4030:USB:Write[0x%x] Error %d\n", address, ret); @@ -315,7 +315,7 @@ static inline int twl4030_readb(struct twl4030_usb *twl, u8 module, u8 address) u8 data; int ret = 0; - ret = twl4030_i2c_read_u8(module, &data, address); + ret = twl_i2c_read_u8(module, &data, address); if (ret >= 0) ret = data; else @@ -462,7 +462,7 @@ static void twl4030_phy_power(struct twl4030_usb *twl, int on) * SLEEP. We work around this by clearing the bit after usv3v1 * is re-activated. This ensures that VUSB3V1 is really active. */ - twl4030_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER, 0, + twl_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER, 0, VUSB_DEDICATED2); regulator_enable(twl->usb1v5); pwr &= ~PHY_PWR_PHYPWD; @@ -505,44 +505,44 @@ static void twl4030_phy_resume(struct twl4030_usb *twl) static int twl4030_usb_ldo_init(struct twl4030_usb *twl) { /* Enable writing to power configuration registers */ - twl4030_i2c_write_u8(TWL4030_MODULE_PM_MASTER, 0xC0, PROTECT_KEY); - twl4030_i2c_write_u8(TWL4030_MODULE_PM_MASTER, 0x0C, PROTECT_KEY); + twl_i2c_write_u8(TWL4030_MODULE_PM_MASTER, 0xC0, PROTECT_KEY); + twl_i2c_write_u8(TWL4030_MODULE_PM_MASTER, 0x0C, PROTECT_KEY); /* put VUSB3V1 LDO in active state */ - twl4030_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER, 0, VUSB_DEDICATED2); + twl_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER, 0, VUSB_DEDICATED2); /* input to VUSB3V1 LDO is from VBAT, not VBUS */ - twl4030_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER, 0x14, VUSB_DEDICATED1); + twl_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER, 0x14, VUSB_DEDICATED1); /* Initialize 3.1V regulator */ - twl4030_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER, 0, VUSB3V1_DEV_GRP); + twl_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER, 0, VUSB3V1_DEV_GRP); twl->usb3v1 = regulator_get(twl->dev, "usb3v1"); if (IS_ERR(twl->usb3v1)) return -ENODEV; - twl4030_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER, 0, VUSB3V1_TYPE); + twl_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER, 0, VUSB3V1_TYPE); /* Initialize 1.5V regulator */ - twl4030_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER, 0, VUSB1V5_DEV_GRP); + twl_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER, 0, VUSB1V5_DEV_GRP); twl->usb1v5 = regulator_get(twl->dev, "usb1v5"); if (IS_ERR(twl->usb1v5)) goto fail1; - twl4030_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER, 0, VUSB1V5_TYPE); + twl_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER, 0, VUSB1V5_TYPE); /* Initialize 1.8V regulator */ - twl4030_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER, 0, VUSB1V8_DEV_GRP); + twl_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER, 0, VUSB1V8_DEV_GRP); twl->usb1v8 = regulator_get(twl->dev, "usb1v8"); if (IS_ERR(twl->usb1v8)) goto fail2; - twl4030_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER, 0, VUSB1V8_TYPE); + twl_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER, 0, VUSB1V8_TYPE); /* disable access to power configuration registers */ - twl4030_i2c_write_u8(TWL4030_MODULE_PM_MASTER, 0, PROTECT_KEY); + twl_i2c_write_u8(TWL4030_MODULE_PM_MASTER, 0, PROTECT_KEY); return 0; diff --git a/drivers/video/omap/lcd_2430sdp.c b/drivers/video/omap/lcd_2430sdp.c index 3764a36d914..e3eccc9af78 100644 --- a/drivers/video/omap/lcd_2430sdp.c +++ b/drivers/video/omap/lcd_2430sdp.c @@ -52,7 +52,7 @@ static unsigned enable_gpio; #define TWL4030_VPLL2_DEV_GRP 0x33 #define TWL4030_VPLL2_DEDICATED 0x36 -#define t2_out(c, r, v) twl4030_i2c_write_u8(c, r, v) +#define t2_out(c, r, v) twl_i2c_write_u8(c, r, v) static int sdp2430_panel_init(struct lcd_panel *panel, diff --git a/drivers/watchdog/twl4030_wdt.c b/drivers/watchdog/twl4030_wdt.c index 20968b2aade..8162a40d152 100644 --- a/drivers/watchdog/twl4030_wdt.c +++ b/drivers/watchdog/twl4030_wdt.c @@ -48,7 +48,7 @@ MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started " static int twl4030_wdt_write(unsigned char val) { - return twl4030_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER, val, + return twl_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER, val, TWL4030_WATCHDOG_CFG_REG_OFFS); } diff --git a/include/linux/i2c/twl.h b/include/linux/i2c/twl.h index a50bcf8a404..0f812f5aa72 100644 --- a/include/linux/i2c/twl.h +++ b/include/linux/i2c/twl.h @@ -22,8 +22,8 @@ * */ -#ifndef __TWL4030_H_ -#define __TWL4030_H_ +#ifndef __TWL_H_ +#define __TWL_H_ #include #include @@ -72,20 +72,37 @@ #define TWL4030_MODULE_RTC 0x16 #define TWL4030_MODULE_SECURED_REG 0x17 +#define TWL_MODULE_USB TWL4030_MODULE_USB +#define TWL_MODULE_AUDIO_VOICE TWL4030_MODULE_AUDIO_VOICE +#define TWL_MODULE_PIH TWL4030_MODULE_PIH +#define TWL_MODULE_MADC TWL4030_MODULE_MADC +#define TWL_MODULE_MAIN_CHARGE TWL4030_MODULE_MAIN_CHARGE +#define TWL_MODULE_PM_MASTER TWL4030_MODULE_PM_MASTER +#define TWL_MODULE_PM_RECEIVER TWL4030_MODULE_PM_RECEIVER +#define TWL_MODULE_RTC TWL4030_MODULE_RTC + +#define GPIO_INTR_OFFSET 0 +#define KEYPAD_INTR_OFFSET 1 +#define BCI_INTR_OFFSET 2 +#define MADC_INTR_OFFSET 3 +#define USB_INTR_OFFSET 4 +#define BCI_PRES_INTR_OFFSET 9 +#define USB_PRES_INTR_OFFSET 10 +#define RTC_INTR_OFFSET 11 /* * Read and write single 8-bit registers */ -int twl4030_i2c_write_u8(u8 mod_no, u8 val, u8 reg); -int twl4030_i2c_read_u8(u8 mod_no, u8 *val, u8 reg); +int twl_i2c_write_u8(u8 mod_no, u8 val, u8 reg); +int twl_i2c_read_u8(u8 mod_no, u8 *val, u8 reg); /* * Read and write several 8-bit registers at once. * - * IMPORTANT: For twl4030_i2c_write(), allocate num_bytes + 1 + * IMPORTANT: For twl_i2c_write(), allocate num_bytes + 1 * for the value, and populate your data starting at offset 1. */ -int twl4030_i2c_write(u8 mod_no, u8 *value, u8 reg, unsigned num_bytes); -int twl4030_i2c_read(u8 mod_no, u8 *value, u8 reg, unsigned num_bytes); +int twl_i2c_write(u8 mod_no, u8 *value, u8 reg, unsigned num_bytes); +int twl_i2c_read(u8 mod_no, u8 *value, u8 reg, unsigned num_bytes); /*----------------------------------------------------------------------*/ diff --git a/sound/soc/codecs/twl4030.c b/sound/soc/codecs/twl4030.c index c3a6ceb542c..2a27f7b5672 100644 --- a/sound/soc/codecs/twl4030.c +++ b/sound/soc/codecs/twl4030.c @@ -175,7 +175,7 @@ static int twl4030_write(struct snd_soc_codec *codec, { twl4030_write_reg_cache(codec, reg, value); if (likely(reg < TWL4030_REG_SW_SHADOW)) - return twl4030_i2c_write_u8(TWL4030_MODULE_AUDIO_VOICE, value, + return twl_i2c_write_u8(TWL4030_MODULE_AUDIO_VOICE, value, reg); else return 0; @@ -261,7 +261,7 @@ static void twl4030_power_up(struct snd_soc_codec *codec) do { /* this takes a little while, so don't slam i2c */ udelay(2000); - twl4030_i2c_read_u8(TWL4030_MODULE_AUDIO_VOICE, &byte, + twl_i2c_read_u8(TWL4030_MODULE_AUDIO_VOICE, &byte, TWL4030_REG_ANAMICL); } while ((i++ < 100) && ((byte & TWL4030_CNCL_OFFSET_START) == @@ -542,7 +542,7 @@ static int pin_name##pga_event(struct snd_soc_dapm_widget *w, \ break; \ case SND_SOC_DAPM_POST_PMD: \ reg_val = twl4030_read_reg_cache(w->codec, reg); \ - twl4030_i2c_write_u8(TWL4030_MODULE_AUDIO_VOICE, \ + twl_i2c_write_u8(TWL4030_MODULE_AUDIO_VOICE, \ reg_val & (~mask), \ reg); \ break; \ @@ -679,7 +679,7 @@ static void headset_ramp(struct snd_soc_codec *codec, int ramp) mdelay((ramp_base[(hs_pop & TWL4030_RAMP_DELAY) >> 2] / twl4030->sysclk) + 1); /* Bypass the reg_cache to mute the headset */ - twl4030_i2c_write_u8(TWL4030_MODULE_AUDIO_VOICE, + twl_i2c_write_u8(TWL4030_MODULE_AUDIO_VOICE, hs_gain & (~0x0f), TWL4030_REG_HS_GAIN_SET); -- cgit v1.2.3-70-g09d2 From ef3b7d0d3ed6c53917367003af90a4002f409d3d Mon Sep 17 00:00:00 2001 From: Balaji T K Date: Sun, 13 Dec 2009 21:30:48 +0100 Subject: mfd: Rename twl4030_ routines in rtc-twl.c This patch renames all twl4030_ functions to twl_ so that RTC driver can be shared between Triton and Phoenix. Signed-off-by: Balaji T K Signed-off-by: Nayak Rajendra Signed-off-by: Santosh Shilimkar Acked-by: Kevin Hilman Signed-off-by: Samuel Ortiz --- drivers/mfd/twl-core.c | 2 +- drivers/rtc/rtc-twl.c | 136 ++++++++++++++++++++++++------------------------- 2 files changed, 69 insertions(+), 69 deletions(-) (limited to 'drivers/rtc/rtc-twl.c') diff --git a/drivers/mfd/twl-core.c b/drivers/mfd/twl-core.c index 9021f44de2a..ebbd8e16126 100644 --- a/drivers/mfd/twl-core.c +++ b/drivers/mfd/twl-core.c @@ -561,7 +561,7 @@ add_children(struct twl4030_platform_data *pdata, unsigned long features) * Eventually, Linux might become more aware of such * HW security concerns, and "least privilege". */ - child = add_child(3, "twl4030_rtc", + child = add_child(3, "twl_rtc", NULL, 0, true, pdata->irq_base + RTC_INTR_OFFSET, 0); if (IS_ERR(child)) diff --git a/drivers/rtc/rtc-twl.c b/drivers/rtc/rtc-twl.c index 6119712cc8d..7cea920ff6a 100644 --- a/drivers/rtc/rtc-twl.c +++ b/drivers/rtc/rtc-twl.c @@ -1,5 +1,5 @@ /* - * rtc-twl4030.c -- TWL4030 Real Time Clock interface + * rtc-twl.c -- TWL Real Time Clock interface * * Copyright (C) 2007 MontaVista Software, Inc * Author: Alexandre Rusev @@ -86,29 +86,29 @@ /*----------------------------------------------------------------------*/ /* - * Supports 1 byte read from TWL4030 RTC register. + * Supports 1 byte read from TWL RTC register. */ -static int twl4030_rtc_read_u8(u8 *data, u8 reg) +static int twl_rtc_read_u8(u8 *data, u8 reg) { int ret; - ret = twl_i2c_read_u8(TWL4030_MODULE_RTC, data, reg); + ret = twl_i2c_read_u8(TWL_MODULE_RTC, data, reg); if (ret < 0) - pr_err("twl4030_rtc: Could not read TWL4030" + pr_err("twl_rtc: Could not read TWL" "register %X - error %d\n", reg, ret); return ret; } /* - * Supports 1 byte write to TWL4030 RTC registers. + * Supports 1 byte write to TWL RTC registers. */ -static int twl4030_rtc_write_u8(u8 data, u8 reg) +static int twl_rtc_write_u8(u8 data, u8 reg) { int ret; - ret = twl_i2c_write_u8(TWL4030_MODULE_RTC, data, reg); + ret = twl_i2c_write_u8(TWL_MODULE_RTC, data, reg); if (ret < 0) - pr_err("twl4030_rtc: Could not write TWL4030" + pr_err("twl_rtc: Could not write TWL" "register %X - error %d\n", reg, ret); return ret; } @@ -129,7 +129,7 @@ static int set_rtc_irq_bit(unsigned char bit) val = rtc_irq_bits | bit; val &= ~BIT_RTC_INTERRUPTS_REG_EVERY_M; - ret = twl4030_rtc_write_u8(val, REG_RTC_INTERRUPTS_REG); + ret = twl_rtc_write_u8(val, REG_RTC_INTERRUPTS_REG); if (ret == 0) rtc_irq_bits = val; @@ -145,14 +145,14 @@ static int mask_rtc_irq_bit(unsigned char bit) int ret; val = rtc_irq_bits & ~bit; - ret = twl4030_rtc_write_u8(val, REG_RTC_INTERRUPTS_REG); + ret = twl_rtc_write_u8(val, REG_RTC_INTERRUPTS_REG); if (ret == 0) rtc_irq_bits = val; return ret; } -static int twl4030_rtc_alarm_irq_enable(struct device *dev, unsigned enabled) +static int twl_rtc_alarm_irq_enable(struct device *dev, unsigned enabled) { int ret; @@ -164,7 +164,7 @@ static int twl4030_rtc_alarm_irq_enable(struct device *dev, unsigned enabled) return ret; } -static int twl4030_rtc_update_irq_enable(struct device *dev, unsigned enabled) +static int twl_rtc_update_irq_enable(struct device *dev, unsigned enabled) { int ret; @@ -177,7 +177,7 @@ static int twl4030_rtc_update_irq_enable(struct device *dev, unsigned enabled) } /* - * Gets current TWL4030 RTC time and date parameters. + * Gets current TWL RTC time and date parameters. * * The RTC's time/alarm representation is not what gmtime(3) requires * Linux to use: @@ -185,23 +185,23 @@ static int twl4030_rtc_update_irq_enable(struct device *dev, unsigned enabled) * - Months are 1..12 vs Linux 0-11 * - Years are 0..99 vs Linux 1900..N (we assume 21st century) */ -static int twl4030_rtc_read_time(struct device *dev, struct rtc_time *tm) +static int twl_rtc_read_time(struct device *dev, struct rtc_time *tm) { unsigned char rtc_data[ALL_TIME_REGS + 1]; int ret; u8 save_control; - ret = twl4030_rtc_read_u8(&save_control, REG_RTC_CTRL_REG); + ret = twl_rtc_read_u8(&save_control, REG_RTC_CTRL_REG); if (ret < 0) return ret; save_control |= BIT_RTC_CTRL_REG_GET_TIME_M; - ret = twl4030_rtc_write_u8(save_control, REG_RTC_CTRL_REG); + ret = twl_rtc_write_u8(save_control, REG_RTC_CTRL_REG); if (ret < 0) return ret; - ret = twl_i2c_read(TWL4030_MODULE_RTC, rtc_data, + ret = twl_i2c_read(TWL_MODULE_RTC, rtc_data, REG_SECONDS_REG, ALL_TIME_REGS); if (ret < 0) { @@ -219,7 +219,7 @@ static int twl4030_rtc_read_time(struct device *dev, struct rtc_time *tm) return ret; } -static int twl4030_rtc_set_time(struct device *dev, struct rtc_time *tm) +static int twl_rtc_set_time(struct device *dev, struct rtc_time *tm) { unsigned char save_control; unsigned char rtc_data[ALL_TIME_REGS + 1]; @@ -233,17 +233,17 @@ static int twl4030_rtc_set_time(struct device *dev, struct rtc_time *tm) rtc_data[6] = bin2bcd(tm->tm_year - 100); /* Stop RTC while updating the TC registers */ - ret = twl4030_rtc_read_u8(&save_control, REG_RTC_CTRL_REG); + ret = twl_rtc_read_u8(&save_control, REG_RTC_CTRL_REG); if (ret < 0) goto out; save_control &= ~BIT_RTC_CTRL_REG_STOP_RTC_M; - twl4030_rtc_write_u8(save_control, REG_RTC_CTRL_REG); + twl_rtc_write_u8(save_control, REG_RTC_CTRL_REG); if (ret < 0) goto out; /* update all the time registers in one shot */ - ret = twl_i2c_write(TWL4030_MODULE_RTC, rtc_data, + ret = twl_i2c_write(TWL_MODULE_RTC, rtc_data, REG_SECONDS_REG, ALL_TIME_REGS); if (ret < 0) { dev_err(dev, "rtc_set_time error %d\n", ret); @@ -252,21 +252,21 @@ static int twl4030_rtc_set_time(struct device *dev, struct rtc_time *tm) /* Start back RTC */ save_control |= BIT_RTC_CTRL_REG_STOP_RTC_M; - ret = twl4030_rtc_write_u8(save_control, REG_RTC_CTRL_REG); + ret = twl_rtc_write_u8(save_control, REG_RTC_CTRL_REG); out: return ret; } /* - * Gets current TWL4030 RTC alarm time. + * Gets current TWL RTC alarm time. */ -static int twl4030_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *alm) +static int twl_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *alm) { unsigned char rtc_data[ALL_TIME_REGS + 1]; int ret; - ret = twl_i2c_read(TWL4030_MODULE_RTC, rtc_data, + ret = twl_i2c_read(TWL_MODULE_RTC, rtc_data, REG_ALARM_SECONDS_REG, ALL_TIME_REGS); if (ret < 0) { dev_err(dev, "rtc_read_alarm error %d\n", ret); @@ -288,12 +288,12 @@ static int twl4030_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *alm) return ret; } -static int twl4030_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *alm) +static int twl_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *alm) { unsigned char alarm_data[ALL_TIME_REGS + 1]; int ret; - ret = twl4030_rtc_alarm_irq_enable(dev, 0); + ret = twl_rtc_alarm_irq_enable(dev, 0); if (ret) goto out; @@ -305,7 +305,7 @@ static int twl4030_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *alm) alarm_data[6] = bin2bcd(alm->time.tm_year - 100); /* update all the alarm registers in one shot */ - ret = twl_i2c_write(TWL4030_MODULE_RTC, alarm_data, + ret = twl_i2c_write(TWL_MODULE_RTC, alarm_data, REG_ALARM_SECONDS_REG, ALL_TIME_REGS); if (ret) { dev_err(dev, "rtc_set_alarm error %d\n", ret); @@ -313,12 +313,12 @@ static int twl4030_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *alm) } if (alm->enabled) - ret = twl4030_rtc_alarm_irq_enable(dev, 1); + ret = twl_rtc_alarm_irq_enable(dev, 1); out: return ret; } -static irqreturn_t twl4030_rtc_interrupt(int irq, void *rtc) +static irqreturn_t twl_rtc_interrupt(int irq, void *rtc) { unsigned long events = 0; int ret = IRQ_NONE; @@ -333,7 +333,7 @@ static irqreturn_t twl4030_rtc_interrupt(int irq, void *rtc) local_irq_enable(); #endif - res = twl4030_rtc_read_u8(&rd_reg, REG_RTC_STATUS_REG); + res = twl_rtc_read_u8(&rd_reg, REG_RTC_STATUS_REG); if (res) goto out; /* @@ -347,14 +347,14 @@ static irqreturn_t twl4030_rtc_interrupt(int irq, void *rtc) else events |= RTC_IRQF | RTC_UF; - res = twl4030_rtc_write_u8(rd_reg | BIT_RTC_STATUS_REG_ALARM_M, + res = twl_rtc_write_u8(rd_reg | BIT_RTC_STATUS_REG_ALARM_M, REG_RTC_STATUS_REG); if (res) goto out; /* Clear on Read enabled. RTC_IT bit of TWL4030_INT_PWR_ISR1 * needs 2 reads to clear the interrupt. One read is done in - * do_twl4030_pwrirq(). Doing the second read, to clear + * do_twl_pwrirq(). Doing the second read, to clear * the bit. * * FIXME the reason PWR_ISR1 needs an extra read is that @@ -376,18 +376,18 @@ out: return ret; } -static struct rtc_class_ops twl4030_rtc_ops = { - .read_time = twl4030_rtc_read_time, - .set_time = twl4030_rtc_set_time, - .read_alarm = twl4030_rtc_read_alarm, - .set_alarm = twl4030_rtc_set_alarm, - .alarm_irq_enable = twl4030_rtc_alarm_irq_enable, - .update_irq_enable = twl4030_rtc_update_irq_enable, +static struct rtc_class_ops twl_rtc_ops = { + .read_time = twl_rtc_read_time, + .set_time = twl_rtc_set_time, + .read_alarm = twl_rtc_read_alarm, + .set_alarm = twl_rtc_set_alarm, + .alarm_irq_enable = twl_rtc_alarm_irq_enable, + .update_irq_enable = twl_rtc_update_irq_enable, }; /*----------------------------------------------------------------------*/ -static int __devinit twl4030_rtc_probe(struct platform_device *pdev) +static int __devinit twl_rtc_probe(struct platform_device *pdev) { struct rtc_device *rtc; int ret = 0; @@ -398,7 +398,7 @@ static int __devinit twl4030_rtc_probe(struct platform_device *pdev) return -EINVAL; rtc = rtc_device_register(pdev->name, - &pdev->dev, &twl4030_rtc_ops, THIS_MODULE); + &pdev->dev, &twl_rtc_ops, THIS_MODULE); if (IS_ERR(rtc)) { ret = PTR_ERR(rtc); dev_err(&pdev->dev, "can't register RTC device, err %ld\n", @@ -409,7 +409,7 @@ static int __devinit twl4030_rtc_probe(struct platform_device *pdev) platform_set_drvdata(pdev, rtc); - ret = twl4030_rtc_read_u8(&rd_reg, REG_RTC_STATUS_REG); + ret = twl_rtc_read_u8(&rd_reg, REG_RTC_STATUS_REG); if (ret < 0) goto out1; @@ -420,11 +420,11 @@ static int __devinit twl4030_rtc_probe(struct platform_device *pdev) dev_warn(&pdev->dev, "Pending Alarm interrupt detected.\n"); /* Clear RTC Power up reset and pending alarm interrupts */ - ret = twl4030_rtc_write_u8(rd_reg, REG_RTC_STATUS_REG); + ret = twl_rtc_write_u8(rd_reg, REG_RTC_STATUS_REG); if (ret < 0) goto out1; - ret = request_irq(irq, twl4030_rtc_interrupt, + ret = request_irq(irq, twl_rtc_interrupt, IRQF_TRIGGER_RISING, dev_name(&rtc->dev), rtc); if (ret < 0) { @@ -433,20 +433,20 @@ static int __devinit twl4030_rtc_probe(struct platform_device *pdev) } /* Check RTC module status, Enable if it is off */ - ret = twl4030_rtc_read_u8(&rd_reg, REG_RTC_CTRL_REG); + ret = twl_rtc_read_u8(&rd_reg, REG_RTC_CTRL_REG); if (ret < 0) goto out2; if (!(rd_reg & BIT_RTC_CTRL_REG_STOP_RTC_M)) { - dev_info(&pdev->dev, "Enabling TWL4030-RTC.\n"); + dev_info(&pdev->dev, "Enabling TWL-RTC.\n"); rd_reg = BIT_RTC_CTRL_REG_STOP_RTC_M; - ret = twl4030_rtc_write_u8(rd_reg, REG_RTC_CTRL_REG); + ret = twl_rtc_write_u8(rd_reg, REG_RTC_CTRL_REG); if (ret < 0) goto out2; } /* init cached IRQ enable bits */ - ret = twl4030_rtc_read_u8(&rtc_irq_bits, REG_RTC_INTERRUPTS_REG); + ret = twl_rtc_read_u8(&rtc_irq_bits, REG_RTC_INTERRUPTS_REG); if (ret < 0) goto out2; @@ -461,10 +461,10 @@ out0: } /* - * Disable all TWL4030 RTC module interrupts. + * Disable all TWL RTC module interrupts. * Sets status flag to free. */ -static int __devexit twl4030_rtc_remove(struct platform_device *pdev) +static int __devexit twl_rtc_remove(struct platform_device *pdev) { /* leave rtc running, but disable irqs */ struct rtc_device *rtc = platform_get_drvdata(pdev); @@ -480,7 +480,7 @@ static int __devexit twl4030_rtc_remove(struct platform_device *pdev) return 0; } -static void twl4030_rtc_shutdown(struct platform_device *pdev) +static void twl_rtc_shutdown(struct platform_device *pdev) { /* mask timer interrupts, but leave alarm interrupts on to enable power-on when alarm is triggered */ @@ -491,7 +491,7 @@ static void twl4030_rtc_shutdown(struct platform_device *pdev) static unsigned char irqstat; -static int twl4030_rtc_suspend(struct platform_device *pdev, pm_message_t state) +static int twl_rtc_suspend(struct platform_device *pdev, pm_message_t state) { irqstat = rtc_irq_bits; @@ -499,42 +499,42 @@ static int twl4030_rtc_suspend(struct platform_device *pdev, pm_message_t state) return 0; } -static int twl4030_rtc_resume(struct platform_device *pdev) +static int twl_rtc_resume(struct platform_device *pdev) { set_rtc_irq_bit(irqstat); return 0; } #else -#define twl4030_rtc_suspend NULL -#define twl4030_rtc_resume NULL +#define twl_rtc_suspend NULL +#define twl_rtc_resume NULL #endif -MODULE_ALIAS("platform:twl4030_rtc"); +MODULE_ALIAS("platform:twl_rtc"); static struct platform_driver twl4030rtc_driver = { - .probe = twl4030_rtc_probe, - .remove = __devexit_p(twl4030_rtc_remove), - .shutdown = twl4030_rtc_shutdown, - .suspend = twl4030_rtc_suspend, - .resume = twl4030_rtc_resume, + .probe = twl_rtc_probe, + .remove = __devexit_p(twl_rtc_remove), + .shutdown = twl_rtc_shutdown, + .suspend = twl_rtc_suspend, + .resume = twl_rtc_resume, .driver = { .owner = THIS_MODULE, - .name = "twl4030_rtc", + .name = "twl_rtc", }, }; -static int __init twl4030_rtc_init(void) +static int __init twl_rtc_init(void) { return platform_driver_register(&twl4030rtc_driver); } -module_init(twl4030_rtc_init); +module_init(twl_rtc_init); -static void __exit twl4030_rtc_exit(void) +static void __exit twl_rtc_exit(void) { platform_driver_unregister(&twl4030rtc_driver); } -module_exit(twl4030_rtc_exit); +module_exit(twl_rtc_exit); MODULE_AUTHOR("Texas Instruments, MontaVista Software"); MODULE_LICENSE("GPL"); -- cgit v1.2.3-70-g09d2 From a6b49ffd2d4bba53ad172b1e78ee51fe15ab195e Mon Sep 17 00:00:00 2001 From: Balaji T K Date: Sun, 13 Dec 2009 22:16:31 +0100 Subject: rtc: Add twl6030 RTC support This patch adds support for RTC in phoenix TWL6030. Register offset addresses have changed in TWL6030 rtc-twl.c will hence forth support all twl RTC (4030, 5030, 6030 ..) Signed-off-by: Balaji T K Signed-off-by: Santosh Shilimkar Reviewed-by: Tony Lindgren Reviewed-by: Kevin Hilman Signed-off-by: Samuel Ortiz --- drivers/rtc/Kconfig | 6 +- drivers/rtc/rtc-twl.c | 152 ++++++++++++++++++++++++++++++++++++-------------- 2 files changed, 114 insertions(+), 44 deletions(-) (limited to 'drivers/rtc/rtc-twl.c') diff --git a/drivers/rtc/Kconfig b/drivers/rtc/Kconfig index f2e1004d12c..71fbd6e8edf 100644 --- a/drivers/rtc/Kconfig +++ b/drivers/rtc/Kconfig @@ -258,14 +258,14 @@ config RTC_DRV_TWL92330 the Menelaus driver; it's not separate module. config RTC_DRV_TWL4030 - tristate "TI TWL4030/TWL5030/TPS659x0" + tristate "TI TWL4030/TWL5030/TWL6030/TPS659x0" depends on RTC_CLASS && TWL4030_CORE help If you say yes here you get support for the RTC on the - TWL4030 family chips, used mostly with OMAP3 platforms. + TWL4030/TWL5030/TWL6030 family chips, used mostly with OMAP3 platforms. This driver can also be built as a module. If so, the module - will be called rtc-twl4030. + will be called rtc-twl. config RTC_DRV_S35390A tristate "Seiko Instruments S-35390A" diff --git a/drivers/rtc/rtc-twl.c b/drivers/rtc/rtc-twl.c index 7cea920ff6a..c6a83a2a722 100644 --- a/drivers/rtc/rtc-twl.c +++ b/drivers/rtc/rtc-twl.c @@ -34,27 +34,75 @@ /* * RTC block register offsets (use TWL_MODULE_RTC) */ -#define REG_SECONDS_REG 0x00 -#define REG_MINUTES_REG 0x01 -#define REG_HOURS_REG 0x02 -#define REG_DAYS_REG 0x03 -#define REG_MONTHS_REG 0x04 -#define REG_YEARS_REG 0x05 -#define REG_WEEKS_REG 0x06 - -#define REG_ALARM_SECONDS_REG 0x07 -#define REG_ALARM_MINUTES_REG 0x08 -#define REG_ALARM_HOURS_REG 0x09 -#define REG_ALARM_DAYS_REG 0x0A -#define REG_ALARM_MONTHS_REG 0x0B -#define REG_ALARM_YEARS_REG 0x0C - -#define REG_RTC_CTRL_REG 0x0D -#define REG_RTC_STATUS_REG 0x0E -#define REG_RTC_INTERRUPTS_REG 0x0F - -#define REG_RTC_COMP_LSB_REG 0x10 -#define REG_RTC_COMP_MSB_REG 0x11 +enum { + REG_SECONDS_REG = 0, + REG_MINUTES_REG, + REG_HOURS_REG, + REG_DAYS_REG, + REG_MONTHS_REG, + REG_YEARS_REG, + REG_WEEKS_REG, + + REG_ALARM_SECONDS_REG, + REG_ALARM_MINUTES_REG, + REG_ALARM_HOURS_REG, + REG_ALARM_DAYS_REG, + REG_ALARM_MONTHS_REG, + REG_ALARM_YEARS_REG, + + REG_RTC_CTRL_REG, + REG_RTC_STATUS_REG, + REG_RTC_INTERRUPTS_REG, + + REG_RTC_COMP_LSB_REG, + REG_RTC_COMP_MSB_REG, +}; +const static u8 twl4030_rtc_reg_map[] = { + [REG_SECONDS_REG] = 0x00, + [REG_MINUTES_REG] = 0x01, + [REG_HOURS_REG] = 0x02, + [REG_DAYS_REG] = 0x03, + [REG_MONTHS_REG] = 0x04, + [REG_YEARS_REG] = 0x05, + [REG_WEEKS_REG] = 0x06, + + [REG_ALARM_SECONDS_REG] = 0x07, + [REG_ALARM_MINUTES_REG] = 0x08, + [REG_ALARM_HOURS_REG] = 0x09, + [REG_ALARM_DAYS_REG] = 0x0A, + [REG_ALARM_MONTHS_REG] = 0x0B, + [REG_ALARM_YEARS_REG] = 0x0C, + + [REG_RTC_CTRL_REG] = 0x0D, + [REG_RTC_STATUS_REG] = 0x0E, + [REG_RTC_INTERRUPTS_REG] = 0x0F, + + [REG_RTC_COMP_LSB_REG] = 0x10, + [REG_RTC_COMP_MSB_REG] = 0x11, +}; +const static u8 twl6030_rtc_reg_map[] = { + [REG_SECONDS_REG] = 0x00, + [REG_MINUTES_REG] = 0x01, + [REG_HOURS_REG] = 0x02, + [REG_DAYS_REG] = 0x03, + [REG_MONTHS_REG] = 0x04, + [REG_YEARS_REG] = 0x05, + [REG_WEEKS_REG] = 0x06, + + [REG_ALARM_SECONDS_REG] = 0x08, + [REG_ALARM_MINUTES_REG] = 0x09, + [REG_ALARM_HOURS_REG] = 0x0A, + [REG_ALARM_DAYS_REG] = 0x0B, + [REG_ALARM_MONTHS_REG] = 0x0C, + [REG_ALARM_YEARS_REG] = 0x0D, + + [REG_RTC_CTRL_REG] = 0x10, + [REG_RTC_STATUS_REG] = 0x11, + [REG_RTC_INTERRUPTS_REG] = 0x12, + + [REG_RTC_COMP_LSB_REG] = 0x13, + [REG_RTC_COMP_MSB_REG] = 0x14, +}; /* RTC_CTRL_REG bitfields */ #define BIT_RTC_CTRL_REG_STOP_RTC_M 0x01 @@ -84,6 +132,7 @@ #define ALL_TIME_REGS 6 /*----------------------------------------------------------------------*/ +static u8 *rtc_reg_map; /* * Supports 1 byte read from TWL RTC register. @@ -92,7 +141,7 @@ static int twl_rtc_read_u8(u8 *data, u8 reg) { int ret; - ret = twl_i2c_read_u8(TWL_MODULE_RTC, data, reg); + ret = twl_i2c_read_u8(TWL_MODULE_RTC, data, (rtc_reg_map[reg])); if (ret < 0) pr_err("twl_rtc: Could not read TWL" "register %X - error %d\n", reg, ret); @@ -106,7 +155,7 @@ static int twl_rtc_write_u8(u8 data, u8 reg) { int ret; - ret = twl_i2c_write_u8(TWL_MODULE_RTC, data, reg); + ret = twl_i2c_write_u8(TWL_MODULE_RTC, data, (rtc_reg_map[reg])); if (ret < 0) pr_err("twl_rtc: Could not write TWL" "register %X - error %d\n", reg, ret); @@ -202,7 +251,7 @@ static int twl_rtc_read_time(struct device *dev, struct rtc_time *tm) return ret; ret = twl_i2c_read(TWL_MODULE_RTC, rtc_data, - REG_SECONDS_REG, ALL_TIME_REGS); + (rtc_reg_map[REG_SECONDS_REG]), ALL_TIME_REGS); if (ret < 0) { dev_err(dev, "rtc_read_time error %d\n", ret); @@ -244,7 +293,7 @@ static int twl_rtc_set_time(struct device *dev, struct rtc_time *tm) /* update all the time registers in one shot */ ret = twl_i2c_write(TWL_MODULE_RTC, rtc_data, - REG_SECONDS_REG, ALL_TIME_REGS); + (rtc_reg_map[REG_SECONDS_REG]), ALL_TIME_REGS); if (ret < 0) { dev_err(dev, "rtc_set_time error %d\n", ret); goto out; @@ -267,7 +316,7 @@ static int twl_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *alm) int ret; ret = twl_i2c_read(TWL_MODULE_RTC, rtc_data, - REG_ALARM_SECONDS_REG, ALL_TIME_REGS); + (rtc_reg_map[REG_ALARM_SECONDS_REG]), ALL_TIME_REGS); if (ret < 0) { dev_err(dev, "rtc_read_alarm error %d\n", ret); return ret; @@ -306,7 +355,7 @@ static int twl_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *alm) /* update all the alarm registers in one shot */ ret = twl_i2c_write(TWL_MODULE_RTC, alarm_data, - REG_ALARM_SECONDS_REG, ALL_TIME_REGS); + (rtc_reg_map[REG_ALARM_SECONDS_REG]), ALL_TIME_REGS); if (ret) { dev_err(dev, "rtc_set_alarm error %d\n", ret); goto out; @@ -352,21 +401,23 @@ static irqreturn_t twl_rtc_interrupt(int irq, void *rtc) if (res) goto out; - /* Clear on Read enabled. RTC_IT bit of TWL4030_INT_PWR_ISR1 - * needs 2 reads to clear the interrupt. One read is done in - * do_twl_pwrirq(). Doing the second read, to clear - * the bit. - * - * FIXME the reason PWR_ISR1 needs an extra read is that - * RTC_IF retriggered until we cleared REG_ALARM_M above. - * But re-reading like this is a bad hack; by doing so we - * risk wrongly clearing status for some other IRQ (losing - * the interrupt). Be smarter about handling RTC_UF ... - */ - res = twl_i2c_read_u8(TWL4030_MODULE_INT, + if (twl_class_is_4030()) { + /* Clear on Read enabled. RTC_IT bit of TWL4030_INT_PWR_ISR1 + * needs 2 reads to clear the interrupt. One read is done in + * do_twl_pwrirq(). Doing the second read, to clear + * the bit. + * + * FIXME the reason PWR_ISR1 needs an extra read is that + * RTC_IF retriggered until we cleared REG_ALARM_M above. + * But re-reading like this is a bad hack; by doing so we + * risk wrongly clearing status for some other IRQ (losing + * the interrupt). Be smarter about handling RTC_UF ... + */ + res = twl_i2c_read_u8(TWL4030_MODULE_INT, &rd_reg, TWL4030_INT_PWR_ISR1); - if (res) - goto out; + if (res) + goto out; + } /* Notify RTC core on event */ rtc_update_irq(rtc, 1, events); @@ -432,6 +483,13 @@ static int __devinit twl_rtc_probe(struct platform_device *pdev) goto out1; } + if (twl_class_is_6030()) { + twl6030_interrupt_unmask(TWL6030_RTC_INT_MASK, + REG_INT_MSK_LINE_A); + twl6030_interrupt_unmask(TWL6030_RTC_INT_MASK, + REG_INT_MSK_STS_A); + } + /* Check RTC module status, Enable if it is off */ ret = twl_rtc_read_u8(&rd_reg, REG_RTC_CTRL_REG); if (ret < 0) @@ -472,6 +530,13 @@ static int __devexit twl_rtc_remove(struct platform_device *pdev) mask_rtc_irq_bit(BIT_RTC_INTERRUPTS_REG_IT_ALARM_M); mask_rtc_irq_bit(BIT_RTC_INTERRUPTS_REG_IT_TIMER_M); + if (twl_class_is_6030()) { + twl6030_interrupt_mask(TWL6030_RTC_INT_MASK, + REG_INT_MSK_LINE_A); + twl6030_interrupt_mask(TWL6030_RTC_INT_MASK, + REG_INT_MSK_STS_A); + } + free_irq(irq, rtc); @@ -526,6 +591,11 @@ static struct platform_driver twl4030rtc_driver = { static int __init twl_rtc_init(void) { + if (twl_class_is_4030()) + rtc_reg_map = (u8 *) twl4030_rtc_reg_map; + else + rtc_reg_map = (u8 *) twl6030_rtc_reg_map; + return platform_driver_register(&twl4030rtc_driver); } module_init(twl_rtc_init); -- cgit v1.2.3-70-g09d2