From 410ca5c7c6ed08bda165e8137bff26c3fbee5a1b Mon Sep 17 00:00:00 2001 From: Matthew Wilcox Date: Thu, 15 Dec 2005 16:22:01 -0500 Subject: [SCSI] Move scsi_print_msg to SPI class scsi_print_msg() is an SPI-specific concept. This patch moves it from constants.c to scsi_transport_spi.c and updates the Kconfig to link in the SPI class for the drivers which use scsi_print_msg(). Signed-off-by: Matthew Wilcox Signed-off-by: James Bottomley --- drivers/scsi/Kconfig | 13 +++++++++++++ 1 file changed, 13 insertions(+) (limited to 'drivers/scsi/Kconfig') diff --git a/drivers/scsi/Kconfig b/drivers/scsi/Kconfig index 20dd85a7781..4c42065dea8 100644 --- a/drivers/scsi/Kconfig +++ b/drivers/scsi/Kconfig @@ -336,6 +336,7 @@ config SCSI_ACARD config SCSI_AHA152X tristate "Adaptec AHA152X/2825 support" depends on ISA && SCSI && !64BIT + select SCSI_SPI_ATTRS ---help--- This is a driver for the AHA-1510, AHA-1520, AHA-1522, and AHA-2825 SCSI host adapters. It also works for the AVA-1505, but the IRQ etc. @@ -623,6 +624,7 @@ config SCSI_OMIT_FLASHPOINT config SCSI_DMX3191D tristate "DMX3191D SCSI support" depends on PCI && SCSI + select SCSI_SPI_ATTRS help This is support for Domex DMX3191D SCSI Host Adapters. @@ -632,6 +634,7 @@ config SCSI_DMX3191D config SCSI_DTC3280 tristate "DTC3180/3280 SCSI support" depends on ISA && SCSI + select SCSI_SPI_ATTRS help This is support for DTC 3180/3280 SCSI Host Adapters. Please read the SCSI-HOWTO, available from @@ -752,6 +755,7 @@ config SCSI_GDTH config SCSI_GENERIC_NCR5380 tristate "Generic NCR5380/53c400 SCSI PIO support" depends on ISA && SCSI + select SCSI_SPI_ATTRS ---help--- This is a driver for the old NCR 53c80 series of SCSI controllers on boards using PIO. Most boards such as the Trantor T130 fit this @@ -771,6 +775,7 @@ config SCSI_GENERIC_NCR5380 config SCSI_GENERIC_NCR5380_MMIO tristate "Generic NCR5380/53c400 SCSI MMIO support" depends on ISA && SCSI + select SCSI_SPI_ATTRS ---help--- This is a driver for the old NCR 53c80 series of SCSI controllers on boards using memory mapped I/O. @@ -1254,6 +1259,7 @@ config SCSI_MCA_53C9X config SCSI_PAS16 tristate "PAS16 SCSI support" depends on ISA && SCSI + select SCSI_SPI_ATTRS ---help--- This is support for a SCSI host adapter. It is explained in section 3.10 of the SCSI-HOWTO, available from @@ -1423,6 +1429,7 @@ config SCSI_DC390T config SCSI_T128 tristate "Trantor T128/T128F/T228 SCSI support" depends on ISA && SCSI + select SCSI_SPI_ATTRS ---help--- This is support for a SCSI host adapter. It is explained in section 3.11 of the SCSI-HOWTO, available from @@ -1681,6 +1688,7 @@ config OKTAGON_SCSI config ATARI_SCSI tristate "Atari native SCSI support" depends on ATARI && SCSI && BROKEN + select SCSI_SPI_ATTRS ---help--- If you have an Atari with built-in NCR5380 SCSI controller (TT, Falcon, ...) say Y to get it supported. Of course also, if you have @@ -1722,6 +1730,7 @@ config TT_DMA_EMUL config MAC_SCSI bool "Macintosh NCR5380 SCSI" depends on MAC && SCSI=y + select SCSI_SPI_ATTRS help This is the NCR 5380 SCSI controller included on most of the 68030 based Macintoshes. If you have one of these say Y and read the @@ -1743,6 +1752,7 @@ config SCSI_MAC_ESP config MVME147_SCSI bool "WD33C93 SCSI driver for MVME147" depends on MVME147 && SCSI=y + select SCSI_SPI_ATTRS help Support for the on-board SCSI controller on the Motorola MVME147 single-board computer. @@ -1750,6 +1760,7 @@ config MVME147_SCSI config MVME16x_SCSI bool "NCR53C710 SCSI driver for MVME16x" depends on MVME16x && SCSI && BROKEN + select SCSI_SPI_ATTRS help The Motorola MVME162, 166, 167, 172 and 177 boards use the NCR53C710 SCSI controller chip. Almost everyone using one of these boards @@ -1758,6 +1769,7 @@ config MVME16x_SCSI config BVME6000_SCSI bool "NCR53C710 SCSI driver for BVME6000" depends on BVME6000 && SCSI && BROKEN + select SCSI_SPI_ATTRS help The BVME4000 and BVME6000 boards from BVM Ltd use the NCR53C710 SCSI controller chip. Almost everyone using one of these boards @@ -1774,6 +1786,7 @@ config SCSI_NCR53C7xx_FAST config SUN3_SCSI tristate "Sun3 NCR5380 SCSI" depends on SUN3 && SCSI && BROKEN + select SCSI_SPI_ATTRS help This option will enable support for the OBIO (onboard io) NCR5380 SCSI controller found in the Sun 3/50 and 3/60, as well as for -- cgit v1.2.3-70-g09d2