From 8d63f375051bfb1506fa546db840af8510d1cd60 Mon Sep 17 00:00:00 2001 From: Linas Vepstas Date: Wed, 14 Feb 2007 14:28:36 -0600 Subject: [SCSI] lpfc: add PCI error recovery support This patch adds PCI Error recovery support to the Emulex Lightpulse Fibrechannel (lpfc) SCSI device driver. Lightly tested at this point, works. Signed-off-by: Linas Vepstas Acked-by: Bino.Sebastian@Emulex.Com Acked-by: James Smart Signed-off-by: James Bottomley --- drivers/scsi/lpfc/lpfc_init.c | 97 +++++++++++++++++++++++++++++++++++++++++++ drivers/scsi/lpfc/lpfc_sli.c | 12 ++++++ 2 files changed, 109 insertions(+) (limited to 'drivers/scsi/lpfc') diff --git a/drivers/scsi/lpfc/lpfc_init.c b/drivers/scsi/lpfc/lpfc_init.c index afca45cdbce..9d014e5a81c 100644 --- a/drivers/scsi/lpfc/lpfc_init.c +++ b/drivers/scsi/lpfc/lpfc_init.c @@ -518,6 +518,10 @@ lpfc_handle_eratt(struct lpfc_hba * phba) struct lpfc_sli *psli = &phba->sli; struct lpfc_sli_ring *pring; uint32_t event_data; + /* If the pci channel is offline, ignore possible errors, + * since we cannot communicate with the pci card anyway. */ + if (pci_channel_offline(phba->pcidev)) + return; if (phba->work_hs & HS_FFER6 || phba->work_hs & HS_FFER5) { @@ -1797,6 +1801,92 @@ lpfc_pci_remove_one(struct pci_dev *pdev) pci_set_drvdata(pdev, NULL); } +/** + * lpfc_io_error_detected - called when PCI error is detected + * @pdev: Pointer to PCI device + * @state: The current pci conneection state + * + * This function is called after a PCI bus error affecting + * this device has been detected. + */ +static pci_ers_result_t lpfc_io_error_detected(struct pci_dev *pdev, + pci_channel_state_t state) +{ + struct Scsi_Host *host = pci_get_drvdata(pdev); + struct lpfc_hba *phba = (struct lpfc_hba *)host->hostdata; + struct lpfc_sli *psli = &phba->sli; + struct lpfc_sli_ring *pring; + + if (state == pci_channel_io_perm_failure) { + lpfc_pci_remove_one(pdev); + return PCI_ERS_RESULT_DISCONNECT; + } + pci_disable_device(pdev); + /* + * There may be I/Os dropped by the firmware. + * Error iocb (I/O) on txcmplq and let the SCSI layer + * retry it after re-establishing link. + */ + pring = &psli->ring[psli->fcp_ring]; + lpfc_sli_abort_iocb_ring(phba, pring); + + /* Request a slot reset. */ + return PCI_ERS_RESULT_NEED_RESET; +} + +/** + * lpfc_io_slot_reset - called after the pci bus has been reset. + * @pdev: Pointer to PCI device + * + * Restart the card from scratch, as if from a cold-boot. + */ +static pci_ers_result_t lpfc_io_slot_reset(struct pci_dev *pdev) +{ + struct Scsi_Host *host = pci_get_drvdata(pdev); + struct lpfc_hba *phba = (struct lpfc_hba *)host->hostdata; + struct lpfc_sli *psli = &phba->sli; + int bars = pci_select_bars(pdev, IORESOURCE_MEM); + + dev_printk(KERN_INFO, &pdev->dev, "recovering from a slot reset.\n"); + if (pci_enable_device_bars(pdev, bars)) { + printk(KERN_ERR "lpfc: Cannot re-enable " + "PCI device after reset.\n"); + return PCI_ERS_RESULT_DISCONNECT; + } + + pci_set_master(pdev); + + /* Re-establishing Link */ + spin_lock_irq(phba->host->host_lock); + phba->fc_flag |= FC_ESTABLISH_LINK; + psli->sli_flag &= ~LPFC_SLI2_ACTIVE; + spin_unlock_irq(phba->host->host_lock); + + + /* Take device offline; this will perform cleanup */ + lpfc_offline(phba); + lpfc_sli_brdrestart(phba); + + return PCI_ERS_RESULT_RECOVERED; +} + +/** + * lpfc_io_resume - called when traffic can start flowing again. + * @pdev: Pointer to PCI device + * + * This callback is called when the error recovery driver tells us that + * its OK to resume normal operation. + */ +static void lpfc_io_resume(struct pci_dev *pdev) +{ + struct Scsi_Host *host = pci_get_drvdata(pdev); + struct lpfc_hba *phba = (struct lpfc_hba *)host->hostdata; + + if (lpfc_online(phba) == 0) { + mod_timer(&phba->fc_estabtmo, jiffies + HZ * 60); + } +} + static struct pci_device_id lpfc_id_table[] = { {PCI_VENDOR_ID_EMULEX, PCI_DEVICE_ID_VIPER, PCI_ANY_ID, PCI_ANY_ID, }, @@ -1857,11 +1947,18 @@ static struct pci_device_id lpfc_id_table[] = { MODULE_DEVICE_TABLE(pci, lpfc_id_table); +static struct pci_error_handlers lpfc_err_handler = { + .error_detected = lpfc_io_error_detected, + .slot_reset = lpfc_io_slot_reset, + .resume = lpfc_io_resume, +}; + static struct pci_driver lpfc_driver = { .name = LPFC_DRIVER_NAME, .id_table = lpfc_id_table, .probe = lpfc_pci_probe_one, .remove = __devexit_p(lpfc_pci_remove_one), + .err_handler = &lpfc_err_handler, }; static int __init diff --git a/drivers/scsi/lpfc/lpfc_sli.c b/drivers/scsi/lpfc/lpfc_sli.c index a4128e19338..9fb6960a8ad 100644 --- a/drivers/scsi/lpfc/lpfc_sli.c +++ b/drivers/scsi/lpfc/lpfc_sli.c @@ -2104,6 +2104,10 @@ lpfc_sli_issue_mbox(struct lpfc_hba * phba, LPFC_MBOXQ_t * pmbox, uint32_t flag) volatile uint32_t word0, ldata; void __iomem *to_slim; + /* If the PCI channel is in offline state, do not post mbox. */ + if (unlikely(pci_channel_offline(phba->pcidev))) + return MBX_NOT_FINISHED; + psli = &phba->sli; spin_lock_irqsave(phba->host->host_lock, drvr_flag); @@ -2407,6 +2411,10 @@ lpfc_sli_issue_iocb(struct lpfc_hba *phba, struct lpfc_sli_ring *pring, struct lpfc_iocbq *nextiocb; IOCB_t *iocb; + /* If the PCI channel is in offline state, do not post iocbs. */ + if (unlikely(pci_channel_offline(phba->pcidev))) + return IOCB_ERROR; + /* * We should never get an IOCB if we are in a < LINK_DOWN state */ @@ -3154,6 +3162,10 @@ lpfc_intr_handler(int irq, void *dev_id) if (unlikely(!phba)) return IRQ_NONE; + /* If the pci channel is offline, ignore all the interrupts. */ + if (unlikely(pci_channel_offline(phba->pcidev))) + return IRQ_NONE; + phba->sli.slistat.sli_intr++; /* -- cgit v1.2.3-70-g09d2