From c00d8994d91e51aa6b891ad0e877f66cc1011de2 Mon Sep 17 00:00:00 2001 From: Andrew Vasquez Date: Thu, 11 Sep 2008 21:22:49 -0700 Subject: [SCSI] qla2xxx: Add Flash Layout Table support. The Flash Layout Table (FLT) present on many recent HBAs encodes flash usage information, organizes data stored into separate regions and presents the information uniformly to the driver. Use this information rather than using specific hard-coded values based on ISP type. Signed-off-by: Andrew Vasquez Signed-off-by: James Bottomley --- drivers/scsi/qla2xxx/qla_gbl.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/scsi/qla2xxx/qla_gbl.h') diff --git a/drivers/scsi/qla2xxx/qla_gbl.h b/drivers/scsi/qla2xxx/qla_gbl.h index 0b156735e9a..dbd9f93890e 100644 --- a/drivers/scsi/qla2xxx/qla_gbl.h +++ b/drivers/scsi/qla2xxx/qla_gbl.h @@ -313,7 +313,7 @@ extern int qla24xx_get_flash_version(scsi_qla_host_t *, void *); extern int qla2xxx_hw_event_log(scsi_qla_host_t *, uint16_t , uint16_t, uint16_t, uint16_t); -extern void qla2xxx_get_flash_info(scsi_qla_host_t *); +extern int qla2xxx_get_flash_info(scsi_qla_host_t *); extern int qla2xxx_get_vpd_field(scsi_qla_host_t *, char *, char *, size_t); /* -- cgit v1.2.3-70-g09d2 From 272976ca186982f7bbc4f22876c53d6c9f7b6e32 Mon Sep 17 00:00:00 2001 From: Andrew Vasquez Date: Thu, 11 Sep 2008 21:22:50 -0700 Subject: [SCSI] qla2xxx: Add NPIV-Config Table support. To instatiate pre-configured vport entities defined within an HBA's flash memory. Signed-off-by: Andrew Vasquez Signed-off-by: James Bottomley --- drivers/scsi/qla2xxx/qla_def.h | 2 + drivers/scsi/qla2xxx/qla_fw.h | 26 +++++++++++ drivers/scsi/qla2xxx/qla_gbl.h | 2 + drivers/scsi/qla2xxx/qla_os.c | 7 +++ drivers/scsi/qla2xxx/qla_sup.c | 98 +++++++++++++++++++++++++++++++++++++++++- 5 files changed, 133 insertions(+), 2 deletions(-) (limited to 'drivers/scsi/qla2xxx/qla_gbl.h') diff --git a/drivers/scsi/qla2xxx/qla_def.h b/drivers/scsi/qla2xxx/qla_def.h index 880e71127b7..83c81921677 100644 --- a/drivers/scsi/qla2xxx/qla_def.h +++ b/drivers/scsi/qla2xxx/qla_def.h @@ -2239,6 +2239,7 @@ typedef struct scsi_qla_host { #define FCPORT_UPDATE_NEEDED 27 #define VP_DPC_NEEDED 28 /* wake up for VP dpc handling */ #define UNLOADING 29 +#define NPIV_CONFIG_NEEDED 30 uint32_t device_flags; #define DFLG_LOCAL_DEVICES BIT_0 @@ -2559,6 +2560,7 @@ typedef struct scsi_qla_host { uint32_t flt_region_fw; uint32_t flt_region_vpd_nvram; uint32_t flt_region_hw_event; + uint32_t flt_region_npiv_conf; /* Needed for BEACON */ uint16_t beacon_blink_led; diff --git a/drivers/scsi/qla2xxx/qla_fw.h b/drivers/scsi/qla2xxx/qla_fw.h index 2ec986bf834..d1d14202575 100644 --- a/drivers/scsi/qla2xxx/qla_fw.h +++ b/drivers/scsi/qla2xxx/qla_fw.h @@ -791,6 +791,8 @@ struct device_reg_24xx { #define FA_FLASH_DESCR_ADDR_24 0x11000 #define FA_FLASH_LAYOUT_ADDR_24 0x11400 +#define FA_NPIV_CONF0_ADDR_24 0x16000 +#define FA_NPIV_CONF1_ADDR_24 0x17000 #define FA_FW_AREA_ADDR 0x40000 #define FA_VPD_NVRAM_ADDR 0x48000 @@ -801,6 +803,9 @@ struct device_reg_24xx { #define FA_HW_EVENT1_ADDR 0x54400 #define FA_HW_EVENT_SIZE 0x200 #define FA_HW_EVENT_ENTRY_SIZE 4 +#define FA_NPIV_CONF0_ADDR 0x5C000 +#define FA_NPIV_CONF1_ADDR 0x5D000 + /* * Flash Error Log Event Codes. */ @@ -1230,6 +1235,8 @@ struct qla_flt_header { #define FLT_REG_FLT 0x1c #define FLT_REG_HW_EVENT_0 0x1d #define FLT_REG_HW_EVENT_1 0x1f +#define FLT_REG_NPIV_CONF_0 0x29 +#define FLT_REG_NPIV_CONF_1 0x2a struct qla_flt_region { uint32_t code; @@ -1238,6 +1245,25 @@ struct qla_flt_region { uint32_t end; }; +/* Flash NPIV Configuration Table ********************************************/ + +struct qla_npiv_header { + uint8_t sig[2]; + uint16_t version; + uint16_t entries; + uint16_t unused[4]; + uint16_t checksum; +}; + +struct qla_npiv_entry { + uint16_t flags; + uint16_t vf_id; + uint16_t qos; + uint16_t unused1; + uint8_t port_name[WWN_SIZE]; + uint8_t node_name[WWN_SIZE]; +}; + /* 84XX Support **************************************************************/ #define MBA_ISP84XX_ALERT 0x800f /* Alert Notification. */ diff --git a/drivers/scsi/qla2xxx/qla_gbl.h b/drivers/scsi/qla2xxx/qla_gbl.h index dbd9f93890e..753dbe6cce6 100644 --- a/drivers/scsi/qla2xxx/qla_gbl.h +++ b/drivers/scsi/qla2xxx/qla_gbl.h @@ -316,6 +316,8 @@ extern int qla2xxx_hw_event_log(scsi_qla_host_t *, uint16_t , uint16_t, extern int qla2xxx_get_flash_info(scsi_qla_host_t *); extern int qla2xxx_get_vpd_field(scsi_qla_host_t *, char *, char *, size_t); +extern void qla2xxx_flash_npiv_conf(scsi_qla_host_t *); + /* * Global Function Prototypes in qla_dbg.c source file. */ diff --git a/drivers/scsi/qla2xxx/qla_os.c b/drivers/scsi/qla2xxx/qla_os.c index c1ffc3070eb..3433441b956 100644 --- a/drivers/scsi/qla2xxx/qla_os.c +++ b/drivers/scsi/qla2xxx/qla_os.c @@ -1517,6 +1517,7 @@ qla2xxx_scan_start(struct Scsi_Host *shost) set_bit(LOOP_RESYNC_NEEDED, &ha->dpc_flags); set_bit(LOCAL_LOOP_UPDATE, &ha->dpc_flags); set_bit(RSCN_UPDATE, &ha->dpc_flags); + set_bit(NPIV_CONFIG_NEEDED, &ha->dpc_flags); } static int @@ -2431,6 +2432,12 @@ qla2x00_do_dpc(void *data) ha->host_no)); } + if (test_bit(NPIV_CONFIG_NEEDED, &ha->dpc_flags) && + atomic_read(&ha->loop_state) == LOOP_READY) { + clear_bit(NPIV_CONFIG_NEEDED, &ha->dpc_flags); + qla2xxx_flash_npiv_conf(ha); + } + if (!ha->interrupts_on) ha->isp_ops->enable_intrs(ha); diff --git a/drivers/scsi/qla2xxx/qla_sup.c b/drivers/scsi/qla2xxx/qla_sup.c index 6de1e3bc62a..e2432ef1ece 100644 --- a/drivers/scsi/qla2xxx/qla_sup.c +++ b/drivers/scsi/qla2xxx/qla_sup.c @@ -686,6 +686,14 @@ qla2xxx_get_flt_info(scsi_qla_host_t *ha, uint32_t flt_addr) if (PCI_FUNC(ha->pdev->devfn)) ha->flt_region_hw_event = start; break; + case FLT_REG_NPIV_CONF_0: + if (!PCI_FUNC(ha->pdev->devfn)) + ha->flt_region_npiv_conf = start; + break; + case FLT_REG_NPIV_CONF_1: + if (PCI_FUNC(ha->pdev->devfn)) + ha->flt_region_npiv_conf = start; + break; } } goto done; @@ -700,11 +708,15 @@ no_flash_data: FA_FLASH_DESCR_ADDR; ha->flt_region_hw_event = !PCI_FUNC(ha->pdev->devfn) ? FA_HW_EVENT0_ADDR: FA_HW_EVENT1_ADDR; + ha->flt_region_npiv_conf = !PCI_FUNC(ha->pdev->devfn) ? + (IS_QLA24XX_TYPE(ha) ? FA_NPIV_CONF0_ADDR_24: FA_NPIV_CONF0_ADDR): + (IS_QLA24XX_TYPE(ha) ? FA_NPIV_CONF1_ADDR_24: FA_NPIV_CONF1_ADDR); done: DEBUG2(qla_printk(KERN_DEBUG, ha, "FLT[%s]: boot=0x%x fw=0x%x " - "vpd_nvram=0x%x fdt=0x%x flt=0x%x hwe=0x%x.\n", loc, + "vpd_nvram=0x%x fdt=0x%x flt=0x%x hwe=0x%x npiv=0x%x.\n", loc, ha->flt_region_boot, ha->flt_region_fw, ha->flt_region_vpd_nvram, - ha->flt_region_fdt, ha->flt_region_flt, ha->flt_region_hw_event)); + ha->flt_region_fdt, ha->flt_region_flt, ha->flt_region_hw_event, + ha->flt_region_npiv_conf)); } static void @@ -814,6 +826,88 @@ qla2xxx_get_flash_info(scsi_qla_host_t *ha) return QLA_SUCCESS; } +void +qla2xxx_flash_npiv_conf(scsi_qla_host_t *ha) +{ +#define NPIV_CONFIG_SIZE (16*1024) + void *data; + uint16_t *wptr; + uint16_t cnt, chksum; + struct qla_npiv_header hdr; + struct qla_npiv_entry *entry; + + if (!IS_QLA24XX_TYPE(ha) && !IS_QLA25XX(ha)) + return; + + ha->isp_ops->read_optrom(ha, (uint8_t *)&hdr, + ha->flt_region_npiv_conf << 2, sizeof(struct qla_npiv_header)); + if (hdr.version == __constant_cpu_to_le16(0xffff)) + return; + if (hdr.version != __constant_cpu_to_le16(1)) { + DEBUG2(qla_printk(KERN_INFO, ha, "Unsupported NPIV-Config " + "detected: version=0x%x entries=0x%x checksum=0x%x.\n", + le16_to_cpu(hdr.version), le16_to_cpu(hdr.entries), + le16_to_cpu(hdr.checksum))); + return; + } + + data = kmalloc(NPIV_CONFIG_SIZE, GFP_KERNEL); + if (!data) { + DEBUG2(qla_printk(KERN_INFO, ha, "NPIV-Config: Unable to " + "allocate memory.\n")); + return; + } + + ha->isp_ops->read_optrom(ha, (uint8_t *)data, + ha->flt_region_npiv_conf << 2, NPIV_CONFIG_SIZE); + + cnt = (sizeof(struct qla_npiv_header) + le16_to_cpu(hdr.entries) * + sizeof(struct qla_npiv_entry)) >> 1; + for (wptr = data, chksum = 0; cnt; cnt--) + chksum += le16_to_cpu(*wptr++); + if (chksum) { + DEBUG2(qla_printk(KERN_INFO, ha, "Inconsistent NPIV-Config " + "detected: version=0x%x entries=0x%x checksum=0x%x.\n", + le16_to_cpu(hdr.version), le16_to_cpu(hdr.entries), + chksum)); + goto done; + } + + entry = data + sizeof(struct qla_npiv_header); + cnt = le16_to_cpu(hdr.entries); + for ( ; cnt; cnt--, entry++) { + uint16_t flags; + struct fc_vport_identifiers vid; + struct fc_vport *vport; + + flags = le16_to_cpu(entry->flags); + if (flags == 0xffff) + continue; + if ((flags & BIT_0) == 0) + continue; + + memset(&vid, 0, sizeof(vid)); + vid.roles = FC_PORT_ROLE_FCP_INITIATOR; + vid.vport_type = FC_PORTTYPE_NPIV; + vid.disable = false; + vid.port_name = wwn_to_u64(entry->port_name); + vid.node_name = wwn_to_u64(entry->node_name); + + DEBUG2(qla_printk(KERN_DEBUG, ha, "NPIV[%02x]: wwpn=%llx " + "wwnn=%llx vf_id=0x%x qos=0x%x.\n", cnt, vid.port_name, + vid.node_name, le16_to_cpu(entry->vf_id), + le16_to_cpu(entry->qos))); + + vport = fc_vport_create(ha->host, 0, &vid); + if (!vport) + qla_printk(KERN_INFO, ha, "NPIV-Config: Failed to " + "create vport [%02x]: wwpn=%llx wwnn=%llx.\n", cnt, + vid.port_name, vid.node_name); + } +done: + kfree(data); +} + static void qla24xx_unprotect_flash(scsi_qla_host_t *ha) { -- cgit v1.2.3-70-g09d2