From 61d9a2b61490f6e121abbe6275ac93cf608f087e Mon Sep 17 00:00:00 2001 From: Tej Parkash Date: Mon, 16 Dec 2013 06:49:43 -0500 Subject: [SCSI] qla4xxx: Fix pending IO completion in reset path before initiating chip reset Issue: Pending IO wait does not complete after triggering Graceful reset, causing ack timeout and call traces. Fix: 1. Reducing the IO command wait timeout before triggering reset, as logically also timeout should be less than reset timeout (10sec). 2. Moving the abort IO after chip reset, because only after chip reset, driver owns the IO otherwise it is with firmware and can still revert back with response. Signed-off-by: Tej Parkash Signed-off-by: Vikas Chaudhary Reviewed-by: Mike Christie Signed-off-by: James Bottomley --- drivers/scsi/qla4xxx/ql4_def.h | 2 +- drivers/scsi/qla4xxx/ql4_os.c | 16 ++++++++++++---- 2 files changed, 13 insertions(+), 5 deletions(-) (limited to 'drivers/scsi/qla4xxx') diff --git a/drivers/scsi/qla4xxx/ql4_def.h b/drivers/scsi/qla4xxx/ql4_def.h index 33eae2e12db..c2deaa00855 100644 --- a/drivers/scsi/qla4xxx/ql4_def.h +++ b/drivers/scsi/qla4xxx/ql4_def.h @@ -194,7 +194,7 @@ #define ADAPTER_INIT_TOV 30 #define ADAPTER_RESET_TOV 180 #define EXTEND_CMD_TOV 60 -#define WAIT_CMD_TOV 30 +#define WAIT_CMD_TOV 5 #define EH_WAIT_CMD_TOV 120 #define FIRMWARE_UP_TOV 60 #define RESET_FIRMWARE_TOV 30 diff --git a/drivers/scsi/qla4xxx/ql4_os.c b/drivers/scsi/qla4xxx/ql4_os.c index 3fec116e272..a27da31c4ff 100644 --- a/drivers/scsi/qla4xxx/ql4_os.c +++ b/drivers/scsi/qla4xxx/ql4_os.c @@ -4561,11 +4561,19 @@ static int qla4xxx_cmd_wait(struct scsi_qla_host *ha) uint32_t index = 0; unsigned long flags; struct scsi_cmnd *cmd; + unsigned long wtime; + uint32_t wtmo; - unsigned long wtime = jiffies + (WAIT_CMD_TOV * HZ); + if (is_qla40XX(ha)) + wtmo = WAIT_CMD_TOV; + else + wtmo = ha->nx_reset_timeout / 2; - DEBUG2(ql4_printk(KERN_INFO, ha, "Wait up to %d seconds for cmds to " - "complete\n", WAIT_CMD_TOV)); + wtime = jiffies + (wtmo * HZ); + + DEBUG2(ql4_printk(KERN_INFO, ha, + "Wait up to %u seconds for cmds to complete\n", + wtmo)); while (!time_after_eq(jiffies, wtime)) { spin_lock_irqsave(&ha->hardware_lock, flags); @@ -4868,11 +4876,11 @@ chip_reset: qla4xxx_cmd_wait(ha); qla4xxx_process_aen(ha, FLUSH_DDB_CHANGED_AENS); - qla4xxx_abort_active_cmds(ha, DID_RESET << 16); DEBUG2(ql4_printk(KERN_INFO, ha, "scsi%ld: %s - Performing chip reset..\n", ha->host_no, __func__)); status = ha->isp_ops->reset_chip(ha); + qla4xxx_abort_active_cmds(ha, DID_RESET << 16); } /* Flush any pending ddb changed AENs */ -- cgit v1.2.3-70-g09d2