From d7a80dad2fe19a2b8c119c8e9cba605474a75a2b Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Fri, 16 Jun 2006 15:00:18 +0900 Subject: [PATCH] libata: convert several bmdma-style controllers to new EH, take #3 Convert sata_sis, svw, uli and vsc drivers to new EH. All the drivers used to specify ATA_FLAG_SATA_RESET to tell libata to use SATA hardreset instead of SRST. This patch makes all the converted drivers use the standard bmdma error handler which uses both SRST and SATA hardreset. All the controllers should be able to perform SRST but still needs verification. If some of the controllers can't do SRST, it will be very easy to spot as it will show up during boot probing. Signed-off-by: Tejun Heo Signed-off-by: Jeff Garzik --- drivers/scsi/sata_vsc.c | 8 +++++--- 1 file changed, 5 insertions(+), 3 deletions(-) (limited to 'drivers/scsi/sata_vsc.c') diff --git a/drivers/scsi/sata_vsc.c b/drivers/scsi/sata_vsc.c index 22ca7b848cf..d92e3dd3704 100644 --- a/drivers/scsi/sata_vsc.c +++ b/drivers/scsi/sata_vsc.c @@ -291,7 +291,6 @@ static const struct ata_port_operations vsc_sata_ops = { .exec_command = ata_exec_command, .check_status = ata_check_status, .dev_select = ata_std_dev_select, - .phy_reset = sata_phy_reset, .bmdma_setup = ata_bmdma_setup, .bmdma_start = ata_bmdma_start, .bmdma_stop = ata_bmdma_stop, @@ -299,7 +298,10 @@ static const struct ata_port_operations vsc_sata_ops = { .qc_prep = ata_qc_prep, .qc_issue = ata_qc_issue_prot, .data_xfer = ata_pio_data_xfer, - .eng_timeout = ata_eng_timeout, + .freeze = ata_bmdma_freeze, + .thaw = ata_bmdma_thaw, + .error_handler = ata_bmdma_error_handler, + .post_internal_cmd = ata_bmdma_post_internal_cmd, .irq_handler = vsc_sata_interrupt, .irq_clear = ata_bmdma_irq_clear, .scr_read = vsc_sata_scr_read, @@ -394,7 +396,7 @@ static int __devinit vsc_sata_init_one (struct pci_dev *pdev, const struct pci_d probe_ent->sht = &vsc_sata_sht; probe_ent->host_flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY | - ATA_FLAG_MMIO | ATA_FLAG_SATA_RESET; + ATA_FLAG_MMIO; probe_ent->port_ops = &vsc_sata_ops; probe_ent->n_ports = 4; probe_ent->irq = pdev->irq; -- cgit v1.2.3-70-g09d2