From 4aff5e2333c9a1609662f2091f55c3f6fffdad36 Mon Sep 17 00:00:00 2001 From: Jens Axboe Date: Thu, 10 Aug 2006 08:44:47 +0200 Subject: [PATCH] Split struct request ->flags into two parts Right now ->flags is a bit of a mess: some are request types, and others are just modifiers. Clean this up by splitting it into ->cmd_type and ->cmd_flags. This allows introduction of generic Linux block message types, useful for sending generic Linux commands to block devices. Signed-off-by: Jens Axboe --- drivers/scsi/aic7xxx_old.c | 4 ++-- drivers/scsi/ide-scsi.c | 14 +++++++------- drivers/scsi/pluto.c | 6 +++--- drivers/scsi/scsi_lib.c | 37 +++++++++++++++++++------------------ drivers/scsi/sd.c | 5 ++--- drivers/scsi/sun3_NCR5380.c | 2 +- drivers/scsi/sun3_scsi.c | 2 +- drivers/scsi/sun3_scsi_vme.c | 2 +- 8 files changed, 36 insertions(+), 36 deletions(-) (limited to 'drivers/scsi') diff --git a/drivers/scsi/aic7xxx_old.c b/drivers/scsi/aic7xxx_old.c index 5dcef48d414..10353379a07 100644 --- a/drivers/scsi/aic7xxx_old.c +++ b/drivers/scsi/aic7xxx_old.c @@ -2862,7 +2862,7 @@ aic7xxx_done(struct aic7xxx_host *p, struct aic7xxx_scb *scb) aic_dev->r_total++; ptr = aic_dev->r_bins; } - if(cmd->device->simple_tags && cmd->request->flags & REQ_HARDBARRIER) + if(cmd->device->simple_tags && cmd->request->cmd_flags & REQ_HARDBARRIER) { aic_dev->barrier_total++; if(scb->tag_action == MSG_ORDERED_Q_TAG) @@ -10158,7 +10158,7 @@ aic7xxx_buildscb(struct aic7xxx_host *p, Scsi_Cmnd *cmd, /* We always force TEST_UNIT_READY to untagged */ if (cmd->cmnd[0] != TEST_UNIT_READY && sdptr->simple_tags) { - if (req->flags & REQ_HARDBARRIER) + if (req->cmd_flags & REQ_HARDBARRIER) { if(sdptr->ordered_tags) { diff --git a/drivers/scsi/ide-scsi.c b/drivers/scsi/ide-scsi.c index 94d1de55607..65b19695ebe 100644 --- a/drivers/scsi/ide-scsi.c +++ b/drivers/scsi/ide-scsi.c @@ -344,7 +344,7 @@ static int idescsi_check_condition(ide_drive_t *drive, struct request *failed_co pc->buffer = buf; pc->c[0] = REQUEST_SENSE; pc->c[4] = pc->request_transfer = pc->buffer_size = SCSI_SENSE_BUFFERSIZE; - rq->flags = REQ_SENSE; + rq->cmd_type = REQ_TYPE_SENSE; pc->timeout = jiffies + WAIT_READY; /* NOTE! Save the failed packet command in "rq->buffer" */ rq->buffer = (void *) failed_command->special; @@ -398,12 +398,12 @@ static int idescsi_end_request (ide_drive_t *drive, int uptodate, int nrsecs) int errors = rq->errors; unsigned long flags; - if (!(rq->flags & (REQ_SPECIAL|REQ_SENSE))) { + if (!blk_special_request(rq) && !blk_sense_request(rq)) { ide_end_request(drive, uptodate, nrsecs); return 0; } ide_end_drive_cmd (drive, 0, 0); - if (rq->flags & REQ_SENSE) { + if (blk_sense_request(rq)) { idescsi_pc_t *opc = (idescsi_pc_t *) rq->buffer; if (log) { printk ("ide-scsi: %s: wrap up check %lu, rst = ", drive->name, opc->scsi_cmd->serial_number); @@ -712,7 +712,7 @@ static ide_startstop_t idescsi_do_request (ide_drive_t *drive, struct request *r printk (KERN_INFO "sector: %ld, nr_sectors: %ld, current_nr_sectors: %d\n",rq->sector,rq->nr_sectors,rq->current_nr_sectors); #endif /* IDESCSI_DEBUG_LOG */ - if (rq->flags & (REQ_SPECIAL|REQ_SENSE)) { + if (blk_sense_request(rq) || blk_special_request(rq)) { return idescsi_issue_pc (drive, (idescsi_pc_t *) rq->special); } blk_dump_rq_flags(rq, "ide-scsi: unsup command"); @@ -938,7 +938,7 @@ static int idescsi_queue (struct scsi_cmnd *cmd, ide_init_drive_cmd (rq); rq->special = (char *) pc; - rq->flags = REQ_SPECIAL; + rq->cmd_type = REQ_TYPE_SPECIAL; spin_unlock_irq(host->host_lock); rq->rq_disk = scsi->disk; (void) ide_do_drive_cmd (drive, rq, ide_end); @@ -992,7 +992,7 @@ static int idescsi_eh_abort (struct scsi_cmnd *cmd) */ printk (KERN_ERR "ide-scsi: cmd aborted!\n"); - if (scsi->pc->rq->flags & REQ_SENSE) + if (blk_sense_request(scsi->pc->rq)) kfree(scsi->pc->buffer); kfree(scsi->pc->rq); kfree(scsi->pc); @@ -1042,7 +1042,7 @@ static int idescsi_eh_reset (struct scsi_cmnd *cmd) /* kill current request */ blkdev_dequeue_request(req); end_that_request_last(req, 0); - if (req->flags & REQ_SENSE) + if (blk_sense_request(req)) kfree(scsi->pc->buffer); kfree(scsi->pc); scsi->pc = NULL; diff --git a/drivers/scsi/pluto.c b/drivers/scsi/pluto.c index 0bd9c60e645..aa60a5f1fbc 100644 --- a/drivers/scsi/pluto.c +++ b/drivers/scsi/pluto.c @@ -67,7 +67,6 @@ static void __init pluto_detect_done(Scsi_Cmnd *SCpnt) static void __init pluto_detect_scsi_done(Scsi_Cmnd *SCpnt) { - SCpnt->request->rq_status = RQ_SCSI_DONE; PLND(("Detect done %08lx\n", (long)SCpnt)) if (atomic_dec_and_test (&fcss)) up(&fc_sem); @@ -166,7 +165,7 @@ int __init pluto_detect(struct scsi_host_template *tpnt) SCpnt->cmd_len = COMMAND_SIZE(INQUIRY); - SCpnt->request->rq_status = RQ_SCSI_BUSY; + SCpnt->request->cmd_flags &= ~REQ_STARTED; SCpnt->done = pluto_detect_done; SCpnt->request_bufflen = 256; @@ -178,7 +177,8 @@ int __init pluto_detect(struct scsi_host_template *tpnt) for (retry = 0; retry < 5; retry++) { for (i = 0; i < fcscount; i++) { if (!fcs[i].fc) break; - if (fcs[i].cmd.request->rq_status != RQ_SCSI_DONE) { + if (!(fcs[i].cmd.request->cmd_flags & REQ_STARTED)) { + fcs[i].cmd.request->cmd_flags |= REQ_STARTED; disable_irq(fcs[i].fc->irq); PLND(("queuecommand %d %d\n", retry, i)) fcp_scsi_queuecommand (&(fcs[i].cmd), diff --git a/drivers/scsi/scsi_lib.c b/drivers/scsi/scsi_lib.c index d6743b959a7..71084728eb4 100644 --- a/drivers/scsi/scsi_lib.c +++ b/drivers/scsi/scsi_lib.c @@ -82,7 +82,7 @@ static void scsi_unprep_request(struct request *req) { struct scsi_cmnd *cmd = req->special; - req->flags &= ~REQ_DONTPREP; + req->cmd_flags &= ~REQ_DONTPREP; req->special = NULL; scsi_put_command(cmd); @@ -196,7 +196,8 @@ int scsi_execute(struct scsi_device *sdev, const unsigned char *cmd, req->sense_len = 0; req->retries = retries; req->timeout = timeout; - req->flags |= flags | REQ_BLOCK_PC | REQ_SPECIAL | REQ_QUIET; + req->cmd_type = REQ_TYPE_BLOCK_PC; + req->cmd_flags |= flags | REQ_QUIET | REQ_PREEMPT; /* * head injection *required* here otherwise quiesce won't work @@ -397,7 +398,8 @@ int scsi_execute_async(struct scsi_device *sdev, const unsigned char *cmd, req = blk_get_request(sdev->request_queue, write, gfp); if (!req) goto free_sense; - req->flags |= REQ_BLOCK_PC | REQ_QUIET; + req->cmd_type = REQ_TYPE_BLOCK_PC; + req->cmd_flags |= REQ_QUIET; if (use_sg) err = scsi_req_map_sg(req, buffer, use_sg, bufflen, gfp); @@ -933,7 +935,7 @@ void scsi_io_completion(struct scsi_cmnd *cmd, unsigned int good_bytes) break; } } - if (!(req->flags & REQ_QUIET)) { + if (!(req->cmd_flags & REQ_QUIET)) { scmd_printk(KERN_INFO, cmd, "Device not ready: "); scsi_print_sense_hdr("", &sshdr); @@ -941,7 +943,7 @@ void scsi_io_completion(struct scsi_cmnd *cmd, unsigned int good_bytes) scsi_end_request(cmd, 0, this_count, 1); return; case VOLUME_OVERFLOW: - if (!(req->flags & REQ_QUIET)) { + if (!(req->cmd_flags & REQ_QUIET)) { scmd_printk(KERN_INFO, cmd, "Volume overflow, CDB: "); __scsi_print_command(cmd->cmnd); @@ -963,7 +965,7 @@ void scsi_io_completion(struct scsi_cmnd *cmd, unsigned int good_bytes) return; } if (result) { - if (!(req->flags & REQ_QUIET)) { + if (!(req->cmd_flags & REQ_QUIET)) { scmd_printk(KERN_INFO, cmd, "SCSI error: return code = 0x%08x\n", result); @@ -995,7 +997,7 @@ static int scsi_init_io(struct scsi_cmnd *cmd) /* * if this is a rq->data based REQ_BLOCK_PC, setup for a non-sg xfer */ - if ((req->flags & REQ_BLOCK_PC) && !req->bio) { + if (blk_pc_request(req) && !req->bio) { cmd->request_bufflen = req->data_len; cmd->request_buffer = req->data; req->buffer = req->data; @@ -1139,13 +1141,12 @@ static int scsi_prep_fn(struct request_queue *q, struct request *req) * these two cases differently. We differentiate by looking * at request->cmd, as this tells us the real story. */ - if (req->flags & REQ_SPECIAL && req->special) { + if (blk_special_request(req) && req->special) cmd = req->special; - } else if (req->flags & (REQ_CMD | REQ_BLOCK_PC)) { - - if(unlikely(specials_only) && !(req->flags & REQ_SPECIAL)) { - if(specials_only == SDEV_QUIESCE || - specials_only == SDEV_BLOCK) + else if (blk_pc_request(req) || blk_fs_request(req)) { + if (unlikely(specials_only) && !(req->cmd_flags & REQ_PREEMPT)){ + if (specials_only == SDEV_QUIESCE || + specials_only == SDEV_BLOCK) goto defer; sdev_printk(KERN_ERR, sdev, @@ -1153,7 +1154,6 @@ static int scsi_prep_fn(struct request_queue *q, struct request *req) goto kill; } - /* * Now try and find a command block that we can use. */ @@ -1184,7 +1184,7 @@ static int scsi_prep_fn(struct request_queue *q, struct request *req) * lock. We hope REQ_STARTED prevents anything untoward from * happening now. */ - if (req->flags & (REQ_CMD | REQ_BLOCK_PC)) { + if (blk_fs_request(req) || blk_pc_request(req)) { int ret; /* @@ -1216,7 +1216,7 @@ static int scsi_prep_fn(struct request_queue *q, struct request *req) /* * Initialize the actual SCSI command for this request. */ - if (req->flags & REQ_BLOCK_PC) { + if (blk_pc_request(req)) { scsi_setup_blk_pc_cmnd(cmd); } else if (req->rq_disk) { struct scsi_driver *drv; @@ -1233,7 +1233,7 @@ static int scsi_prep_fn(struct request_queue *q, struct request *req) /* * The request is now prepped, no need to come back here */ - req->flags |= REQ_DONTPREP; + req->cmd_flags |= REQ_DONTPREP; return BLKPREP_OK; defer: @@ -1454,8 +1454,9 @@ static void scsi_request_fn(struct request_queue *q) if (unlikely(cmd == NULL)) { printk(KERN_CRIT "impossible request in %s.\n" "please mail a stack trace to " - "linux-scsi@vger.kernel.org", + "linux-scsi@vger.kernel.org\n", __FUNCTION__); + blk_dump_rq_flags(req, "foo"); BUG(); } spin_lock(shost->host_lock); diff --git a/drivers/scsi/sd.c b/drivers/scsi/sd.c index 638cff41d43..10bc99c911f 100644 --- a/drivers/scsi/sd.c +++ b/drivers/scsi/sd.c @@ -443,8 +443,7 @@ static int sd_init_command(struct scsi_cmnd * SCpnt) SCpnt->cmnd[0] = READ_6; SCpnt->sc_data_direction = DMA_FROM_DEVICE; } else { - printk(KERN_ERR "sd: Unknown command %lx\n", rq->flags); -/* overkill panic("Unknown sd command %lx\n", rq->flags); */ + printk(KERN_ERR "sd: Unknown command %x\n", rq->cmd_flags); return 0; } @@ -840,7 +839,7 @@ static int sd_issue_flush(struct device *dev, sector_t *error_sector) static void sd_prepare_flush(request_queue_t *q, struct request *rq) { memset(rq->cmd, 0, sizeof(rq->cmd)); - rq->flags |= REQ_BLOCK_PC; + rq->cmd_type = REQ_TYPE_BLOCK_PC; rq->timeout = SD_TIMEOUT; rq->cmd[0] = SYNCHRONIZE_CACHE; rq->cmd_len = 10; diff --git a/drivers/scsi/sun3_NCR5380.c b/drivers/scsi/sun3_NCR5380.c index 2f8073b73bf..7f9bcef6adf 100644 --- a/drivers/scsi/sun3_NCR5380.c +++ b/drivers/scsi/sun3_NCR5380.c @@ -2017,7 +2017,7 @@ static void NCR5380_information_transfer (struct Scsi_Host *instance) if((count > SUN3_DMA_MINSIZE) && (sun3_dma_setup_done != cmd)) { - if(cmd->request->flags & REQ_CMD) { + if(blk_fs_request(cmd->request)) { sun3scsi_dma_setup(d, count, rq_data_dir(cmd->request)); sun3_dma_setup_done = cmd; diff --git a/drivers/scsi/sun3_scsi.c b/drivers/scsi/sun3_scsi.c index 837173415d4..44a99aeb818 100644 --- a/drivers/scsi/sun3_scsi.c +++ b/drivers/scsi/sun3_scsi.c @@ -524,7 +524,7 @@ static inline unsigned long sun3scsi_dma_residual(struct Scsi_Host *instance) static inline unsigned long sun3scsi_dma_xfer_len(unsigned long wanted, Scsi_Cmnd *cmd, int write_flag) { - if(cmd->request->flags & REQ_CMD) + if(blk_fs_request(cmd->request)) return wanted; else return 0; diff --git a/drivers/scsi/sun3_scsi_vme.c b/drivers/scsi/sun3_scsi_vme.c index 008a82ab852..f5742b84b27 100644 --- a/drivers/scsi/sun3_scsi_vme.c +++ b/drivers/scsi/sun3_scsi_vme.c @@ -458,7 +458,7 @@ static inline unsigned long sun3scsi_dma_residual(struct Scsi_Host *instance) static inline unsigned long sun3scsi_dma_xfer_len(unsigned long wanted, Scsi_Cmnd *cmd, int write_flag) { - if(cmd->request->flags & REQ_CMD) + if(blk_fs_request(cmd->request)) return wanted; else return 0; -- cgit v1.2.3-70-g09d2 From cdd6026217c0e4cda2efce1bdc318661bef1f66f Mon Sep 17 00:00:00 2001 From: Jens Axboe Date: Fri, 28 Jul 2006 09:32:07 +0200 Subject: [PATCH] Remove ->rq_status from struct request After Christophs SCSI change, the only usage left is RQ_ACTIVE and RQ_INACTIVE. The block layer sets RQ_INACTIVE right before freeing the request, so any check for RQ_INACTIVE in a driver is a bug and indicates use-after-free. So kill/clean the remaining users, straight forward. Signed-off-by: Jens Axboe --- arch/um/drivers/ubd_kern.c | 2 -- block/ll_rw_blk.c | 3 --- drivers/block/paride/pd.c | 1 - drivers/block/swim3.c | 4 ++-- drivers/block/swim_iop.c | 4 ++-- drivers/fc4/fc.c | 1 - drivers/ide/ide-floppy.c | 3 +-- drivers/ide/ide-io.c | 1 - drivers/ide/ide-tape.c | 4 ++-- drivers/scsi/ide-scsi.c | 2 +- drivers/scsi/scsi.c | 2 +- include/linux/blkdev.h | 13 +++++-------- 12 files changed, 14 insertions(+), 26 deletions(-) (limited to 'drivers/scsi') diff --git a/arch/um/drivers/ubd_kern.c b/arch/um/drivers/ubd_kern.c index 5fa4c8e258a..fda4a394069 100644 --- a/arch/um/drivers/ubd_kern.c +++ b/arch/um/drivers/ubd_kern.c @@ -981,8 +981,6 @@ static int prepare_request(struct request *req, struct io_thread_req *io_req) __u64 offset; int len; - if(req->rq_status == RQ_INACTIVE) return(1); - /* This should be impossible now */ if((rq_data_dir(req) == WRITE) && !dev->openflags.w){ printk("Write attempted on readonly ubd device %s\n", diff --git a/block/ll_rw_blk.c b/block/ll_rw_blk.c index f7462502bfd..b94a396aa62 100644 --- a/block/ll_rw_blk.c +++ b/block/ll_rw_blk.c @@ -283,7 +283,6 @@ static inline void rq_init(request_queue_t *q, struct request *rq) INIT_LIST_HEAD(&rq->donelist); rq->errors = 0; - rq->rq_status = RQ_ACTIVE; rq->bio = rq->biotail = NULL; INIT_HLIST_NODE(&rq->hash); RB_CLEAR_NODE(&rq->rb_node); @@ -2685,8 +2684,6 @@ void __blk_put_request(request_queue_t *q, struct request *req) elv_completed_request(q, req); - req->rq_status = RQ_INACTIVE; - /* * Request may not have originated from ll_rw_blk. if not, * it didn't come out of our reserved rq pools diff --git a/drivers/block/paride/pd.c b/drivers/block/paride/pd.c index 500d2ebb41e..38578b9dbfd 100644 --- a/drivers/block/paride/pd.c +++ b/drivers/block/paride/pd.c @@ -719,7 +719,6 @@ static int pd_special_command(struct pd_unit *disk, memset(&rq, 0, sizeof(rq)); rq.errors = 0; - rq.rq_status = RQ_ACTIVE; rq.rq_disk = disk->gd; rq.ref_count = 1; rq.end_io_data = &wait; diff --git a/drivers/block/swim3.c b/drivers/block/swim3.c index cc42e762396..f2305ee792a 100644 --- a/drivers/block/swim3.c +++ b/drivers/block/swim3.c @@ -319,8 +319,8 @@ static void start_request(struct floppy_state *fs) printk("do_fd_req: dev=%s cmd=%d sec=%ld nr_sec=%ld buf=%p\n", req->rq_disk->disk_name, req->cmd, (long)req->sector, req->nr_sectors, req->buffer); - printk(" rq_status=%d errors=%d current_nr_sectors=%ld\n", - req->rq_status, req->errors, req->current_nr_sectors); + printk(" errors=%d current_nr_sectors=%ld\n", + req->errors, req->current_nr_sectors); #endif if (req->sector < 0 || req->sector >= fs->total_secs) { diff --git a/drivers/block/swim_iop.c b/drivers/block/swim_iop.c index 89e3c2f8b77..dfda796eba5 100644 --- a/drivers/block/swim_iop.c +++ b/drivers/block/swim_iop.c @@ -529,8 +529,8 @@ static void start_request(struct floppy_state *fs) printk("do_fd_req: dev=%s cmd=%d sec=%ld nr_sec=%ld buf=%p\n", CURRENT->rq_disk->disk_name, CURRENT->cmd, CURRENT->sector, CURRENT->nr_sectors, CURRENT->buffer); - printk(" rq_status=%d errors=%d current_nr_sectors=%ld\n", - CURRENT->rq_status, CURRENT->errors, CURRENT->current_nr_sectors); + printk(" errors=%d current_nr_sectors=%ld\n", + CURRENT->errors, CURRENT->current_nr_sectors); #endif if (CURRENT->sector < 0 || CURRENT->sector >= fs->total_secs) { diff --git a/drivers/fc4/fc.c b/drivers/fc4/fc.c index 1a159e8843c..22d17474755 100644 --- a/drivers/fc4/fc.c +++ b/drivers/fc4/fc.c @@ -974,7 +974,6 @@ int fcp_scsi_dev_reset(Scsi_Cmnd *SCpnt) */ fc->rst_pkt->device->host->eh_action = &sem; - fc->rst_pkt->request->rq_status = RQ_SCSI_BUSY; fc->rst_pkt->done = fcp_scsi_reset_done; diff --git a/drivers/ide/ide-floppy.c b/drivers/ide/ide-floppy.c index 0edc3220491..8ccee9c769f 100644 --- a/drivers/ide/ide-floppy.c +++ b/drivers/ide/ide-floppy.c @@ -1281,8 +1281,7 @@ static ide_startstop_t idefloppy_do_request (ide_drive_t *drive, struct request idefloppy_pc_t *pc; unsigned long block = (unsigned long)block_s; - debug_log(KERN_INFO "rq_status: %d, dev: %s, flags: %lx, errors: %d\n", - rq->rq_status, + debug_log(KERN_INFO "dev: %s, flags: %lx, errors: %d\n", rq->rq_disk ? rq->rq_disk->disk_name : "?", rq->flags, rq->errors); debug_log(KERN_INFO "sector: %ld, nr_sectors: %ld, " diff --git a/drivers/ide/ide-io.c b/drivers/ide/ide-io.c index a3ffb04436b..38479a29d3e 100644 --- a/drivers/ide/ide-io.c +++ b/drivers/ide/ide-io.c @@ -1710,7 +1710,6 @@ int ide_do_drive_cmd (ide_drive_t *drive, struct request *rq, ide_action_t actio int must_wait = (action == ide_wait || action == ide_head_wait); rq->errors = 0; - rq->rq_status = RQ_ACTIVE; /* * we need to hold an extra reference to request for safe inspection diff --git a/drivers/ide/ide-tape.c b/drivers/ide/ide-tape.c index 66f9678d2f1..2ebc3760f26 100644 --- a/drivers/ide/ide-tape.c +++ b/drivers/ide/ide-tape.c @@ -2423,8 +2423,8 @@ static ide_startstop_t idetape_do_request(ide_drive_t *drive, #if IDETAPE_DEBUG_LOG #if 0 if (tape->debug_level >= 5) - printk(KERN_INFO "ide-tape: rq_status: %d, " - "dev: %s, cmd: %ld, errors: %d\n", rq->rq_status, + printk(KERN_INFO "ide-tape: %d, " + "dev: %s, cmd: %ld, errors: %d\n", rq->rq_disk->disk_name, rq->cmd[0], rq->errors); #endif if (tape->debug_level >= 2) diff --git a/drivers/scsi/ide-scsi.c b/drivers/scsi/ide-scsi.c index 65b19695ebe..1427a41e844 100644 --- a/drivers/scsi/ide-scsi.c +++ b/drivers/scsi/ide-scsi.c @@ -708,7 +708,7 @@ static ide_startstop_t idescsi_issue_pc (ide_drive_t *drive, idescsi_pc_t *pc) static ide_startstop_t idescsi_do_request (ide_drive_t *drive, struct request *rq, sector_t block) { #if IDESCSI_DEBUG_LOG - printk (KERN_INFO "rq_status: %d, dev: %s, cmd: %x, errors: %d\n",rq->rq_status, rq->rq_disk->disk_name,rq->cmd[0],rq->errors); + printk (KERN_INFO "dev: %s, cmd: %x, errors: %d\n", rq->rq_disk->disk_name,rq->cmd[0],rq->errors); printk (KERN_INFO "sector: %ld, nr_sectors: %ld, current_nr_sectors: %d\n",rq->sector,rq->nr_sectors,rq->current_nr_sectors); #endif /* IDESCSI_DEBUG_LOG */ diff --git a/drivers/scsi/scsi.c b/drivers/scsi/scsi.c index 7a054f9d1ee..12f6639dda2 100644 --- a/drivers/scsi/scsi.c +++ b/drivers/scsi/scsi.c @@ -1065,7 +1065,7 @@ int scsi_device_cancel(struct scsi_device *sdev, int recovery) spin_lock_irqsave(&sdev->list_lock, flags); list_for_each_entry(scmd, &sdev->cmd_list, list) { - if (scmd->request && scmd->request->rq_status != RQ_INACTIVE) { + if (scmd->request) { /* * If we are unable to remove the timer, it means * that the command has already timed out or diff --git a/include/linux/blkdev.h b/include/linux/blkdev.h index d4c1dd046e2..8a3e309e084 100644 --- a/include/linux/blkdev.h +++ b/include/linux/blkdev.h @@ -243,8 +243,6 @@ struct request { void *completion_data; - int rq_status; /* should split this into a few status bits */ - int errors; struct gendisk *rq_disk; unsigned long start_time; @@ -262,14 +260,16 @@ struct request { unsigned short ioprio; - int tag; - - int ref_count; request_queue_t *q; void *special; char *buffer; + int tag; + int errors; + + int ref_count; + /* * when request is used as a packet command carrier */ @@ -456,9 +456,6 @@ struct request_queue struct mutex sysfs_lock; }; -#define RQ_INACTIVE (-1) -#define RQ_ACTIVE 1 - #define QUEUE_FLAG_CLUSTER 0 /* cluster several segments into 1 */ #define QUEUE_FLAG_QUEUED 1 /* uses generic tag queueing */ #define QUEUE_FLAG_STOPPED 2 /* queue is stopped */ -- cgit v1.2.3-70-g09d2 From 9bf09c23853bb8009625c2ec60dc6beb9472d3ca Mon Sep 17 00:00:00 2001 From: Jens Axboe Date: Sat, 30 Sep 2006 20:31:11 +0200 Subject: [PATCH] SCSI: scsi_done_q is unused It is a leftover from before the softirq completion was migrated to the block layer. Signed-off-by: Jens Axboe --- drivers/scsi/scsi.c | 11 +---------- 1 file changed, 1 insertion(+), 10 deletions(-) (limited to 'drivers/scsi') diff --git a/drivers/scsi/scsi.c b/drivers/scsi/scsi.c index 12f6639dda2..da95bce907d 100644 --- a/drivers/scsi/scsi.c +++ b/drivers/scsi/scsi.c @@ -592,12 +592,6 @@ int scsi_dispatch_cmd(struct scsi_cmnd *cmd) return rtn; } - -/* - * Per-CPU I/O completion queue. - */ -static DEFINE_PER_CPU(struct list_head, scsi_done_q); - /** * scsi_req_abort_cmd -- Request command recovery for the specified command * cmd: pointer to the SCSI command of interest @@ -1102,7 +1096,7 @@ MODULE_PARM_DESC(scsi_logging_level, "a bit mask of logging levels"); static int __init init_scsi(void) { - int error, i; + int error; error = scsi_init_queue(); if (error) @@ -1123,9 +1117,6 @@ static int __init init_scsi(void) if (error) goto cleanup_sysctl; - for_each_possible_cpu(i) - INIT_LIST_HEAD(&per_cpu(scsi_done_q, i)); - scsi_netlink_init(); printk(KERN_NOTICE "SCSI subsystem initialized\n"); -- cgit v1.2.3-70-g09d2 From 9361401eb7619c033e2394e4f9f6d410d6719ac7 Mon Sep 17 00:00:00 2001 From: David Howells Date: Sat, 30 Sep 2006 20:45:40 +0200 Subject: [PATCH] BLOCK: Make it possible to disable the block layer [try #6] Make it possible to disable the block layer. Not all embedded devices require it, some can make do with just JFFS2, NFS, ramfs, etc - none of which require the block layer to be present. This patch does the following: (*) Introduces CONFIG_BLOCK to disable the block layer, buffering and blockdev support. (*) Adds dependencies on CONFIG_BLOCK to any configuration item that controls an item that uses the block layer. This includes: (*) Block I/O tracing. (*) Disk partition code. (*) All filesystems that are block based, eg: Ext3, ReiserFS, ISOFS. (*) The SCSI layer. As far as I can tell, even SCSI chardevs use the block layer to do scheduling. Some drivers that use SCSI facilities - such as USB storage - end up disabled indirectly from this. (*) Various block-based device drivers, such as IDE and the old CDROM drivers. (*) MTD blockdev handling and FTL. (*) JFFS - which uses set_bdev_super(), something it could avoid doing by taking a leaf out of JFFS2's book. (*) Makes most of the contents of linux/blkdev.h, linux/buffer_head.h and linux/elevator.h contingent on CONFIG_BLOCK being set. sector_div() is, however, still used in places, and so is still available. (*) Also made contingent are the contents of linux/mpage.h, linux/genhd.h and parts of linux/fs.h. (*) Makes a number of files in fs/ contingent on CONFIG_BLOCK. (*) Makes mm/bounce.c (bounce buffering) contingent on CONFIG_BLOCK. (*) set_page_dirty() doesn't call __set_page_dirty_buffers() if CONFIG_BLOCK is not enabled. (*) fs/no-block.c is created to hold out-of-line stubs and things that are required when CONFIG_BLOCK is not set: (*) Default blockdev file operations (to give error ENODEV on opening). (*) Makes some /proc changes: (*) /proc/devices does not list any blockdevs. (*) /proc/diskstats and /proc/partitions are contingent on CONFIG_BLOCK. (*) Makes some compat ioctl handling contingent on CONFIG_BLOCK. (*) If CONFIG_BLOCK is not defined, makes sys_quotactl() return -ENODEV if given command other than Q_SYNC or if a special device is specified. (*) In init/do_mounts.c, no reference is made to the blockdev routines if CONFIG_BLOCK is not defined. This does not prohibit NFS roots or JFFS2. (*) The bdflush, ioprio_set and ioprio_get syscalls can now be absent (return error ENOSYS by way of cond_syscall if so). (*) The seclvl_bd_claim() and seclvl_bd_release() security calls do nothing if CONFIG_BLOCK is not set, since they can't then happen. Signed-Off-By: David Howells Signed-off-by: Jens Axboe --- block/Kconfig | 20 ++++++++++++++++++ block/Kconfig.iosched | 3 +++ block/Makefile | 2 +- drivers/block/Kconfig | 4 ++++ drivers/cdrom/Kconfig | 2 +- drivers/char/Kconfig | 1 + drivers/char/random.c | 4 ++++ drivers/ide/Kconfig | 4 ++++ drivers/md/Kconfig | 3 +++ drivers/message/i2o/Kconfig | 2 +- drivers/mmc/Kconfig | 2 +- drivers/mmc/Makefile | 3 ++- drivers/mtd/Kconfig | 12 +++++------ drivers/mtd/devices/Kconfig | 2 +- drivers/s390/block/Kconfig | 2 +- drivers/scsi/Kconfig | 2 ++ fs/Kconfig | 31 ++++++++++++++++++++------- fs/Makefile | 14 +++++++++---- fs/compat_ioctl.c | 18 ++++++++++++++++ fs/internal.h | 6 ++++++ fs/no-block.c | 22 +++++++++++++++++++ fs/partitions/Makefile | 2 +- fs/proc/proc_misc.c | 11 +++++++++- fs/quota.c | 44 ++++++++++++++++++++++++++------------ fs/super.c | 4 ++++ fs/xfs/Kconfig | 1 + include/linux/blkdev.h | 50 +++++++++++++++++++++++++++++++------------- include/linux/buffer_head.h | 16 ++++++++++++++ include/linux/compat_ioctl.h | 2 ++ include/linux/elevator.h | 3 +++ include/linux/fs.h | 25 +++++++++++++++++++--- include/linux/genhd.h | 4 ++++ include/linux/mpage.h | 3 +++ include/linux/raid/md.h | 3 +++ include/linux/raid/md_k.h | 3 +++ include/scsi/scsi_tcq.h | 3 ++- init/Kconfig | 2 +- init/do_mounts.c | 13 +++++++++++- kernel/sys_ni.c | 5 +++++ mm/Makefile | 2 +- mm/filemap.c | 4 ++++ mm/migrate.c | 2 ++ mm/page-writeback.c | 8 ++++--- mm/truncate.c | 2 ++ 44 files changed, 308 insertions(+), 63 deletions(-) create mode 100644 fs/no-block.c (limited to 'drivers/scsi') diff --git a/block/Kconfig b/block/Kconfig index b6f5f0a7965..9af6c614dfd 100644 --- a/block/Kconfig +++ b/block/Kconfig @@ -1,6 +1,24 @@ # # Block layer core configuration # +config BLOCK + bool "Enable the block layer" + default y + help + This permits the block layer to be removed from the kernel if it's not + needed (on some embedded devices for example). If this option is + disabled, then blockdev files will become unusable and some + filesystems (such as ext3) will become unavailable. + + This option will also disable SCSI character devices and USB storage + since they make use of various block layer definitions and + facilities. + + Say Y here unless you know you really don't want to mount disks and + suchlike. + +if BLOCK + #XXX - it makes sense to enable this only for 32-bit subarch's, not for x86_64 #for instance. config LBD @@ -33,4 +51,6 @@ config LSF If unsure, say Y. +endif + source block/Kconfig.iosched diff --git a/block/Kconfig.iosched b/block/Kconfig.iosched index 48d090e266f..903f0d3b685 100644 --- a/block/Kconfig.iosched +++ b/block/Kconfig.iosched @@ -1,3 +1,4 @@ +if BLOCK menu "IO Schedulers" @@ -67,3 +68,5 @@ config DEFAULT_IOSCHED default "noop" if DEFAULT_NOOP endmenu + +endif diff --git a/block/Makefile b/block/Makefile index c05de0e0037..4b84d0d5947 100644 --- a/block/Makefile +++ b/block/Makefile @@ -2,7 +2,7 @@ # Makefile for the kernel block layer # -obj-y := elevator.o ll_rw_blk.o ioctl.o genhd.o scsi_ioctl.o +obj-$(CONFIG_BLOCK) := elevator.o ll_rw_blk.o ioctl.o genhd.o scsi_ioctl.o obj-$(CONFIG_IOSCHED_NOOP) += noop-iosched.o obj-$(CONFIG_IOSCHED_AS) += as-iosched.o diff --git a/drivers/block/Kconfig b/drivers/block/Kconfig index b5382cedf0c..422e31d5f8e 100644 --- a/drivers/block/Kconfig +++ b/drivers/block/Kconfig @@ -2,6 +2,8 @@ # Block device driver configuration # +if BLOCK + menu "Block devices" config BLK_DEV_FD @@ -468,3 +470,5 @@ config ATA_OVER_ETH devices like the Coraid EtherDrive (R) Storage Blade. endmenu + +endif diff --git a/drivers/cdrom/Kconfig b/drivers/cdrom/Kconfig index ff5652d4061..4b12e9031fb 100644 --- a/drivers/cdrom/Kconfig +++ b/drivers/cdrom/Kconfig @@ -3,7 +3,7 @@ # menu "Old CD-ROM drivers (not SCSI, not IDE)" - depends on ISA + depends on ISA && BLOCK config CD_NO_IDESCSI bool "Support non-SCSI/IDE/ATAPI CDROM drives" diff --git a/drivers/char/Kconfig b/drivers/char/Kconfig index 4cc619edf42..bde1c665d9f 100644 --- a/drivers/char/Kconfig +++ b/drivers/char/Kconfig @@ -1006,6 +1006,7 @@ config GPIO_VR41XX config RAW_DRIVER tristate "RAW driver (/dev/raw/rawN) (OBSOLETE)" + depends on BLOCK help The raw driver permits block devices to be bound to /dev/raw/rawN. Once bound, I/O against /dev/raw/rawN uses efficient zero-copy I/O. diff --git a/drivers/char/random.c b/drivers/char/random.c index 4c3a5ca9d8f..b430a12eb81 100644 --- a/drivers/char/random.c +++ b/drivers/char/random.c @@ -655,6 +655,7 @@ void add_interrupt_randomness(int irq) add_timer_randomness(irq_timer_state[irq], 0x100 + irq); } +#ifdef CONFIG_BLOCK void add_disk_randomness(struct gendisk *disk) { if (!disk || !disk->random) @@ -667,6 +668,7 @@ void add_disk_randomness(struct gendisk *disk) } EXPORT_SYMBOL(add_disk_randomness); +#endif #define EXTRACT_SIZE 10 @@ -918,6 +920,7 @@ void rand_initialize_irq(int irq) } } +#ifdef CONFIG_BLOCK void rand_initialize_disk(struct gendisk *disk) { struct timer_rand_state *state; @@ -932,6 +935,7 @@ void rand_initialize_disk(struct gendisk *disk) disk->random = state; } } +#endif static ssize_t random_read(struct file * file, char __user * buf, size_t nbytes, loff_t *ppos) diff --git a/drivers/ide/Kconfig b/drivers/ide/Kconfig index b6fb167e20f..69d627bd537 100644 --- a/drivers/ide/Kconfig +++ b/drivers/ide/Kconfig @@ -4,6 +4,8 @@ # Andre Hedrick # +if BLOCK + menu "ATA/ATAPI/MFM/RLL support" config IDE @@ -1082,3 +1084,5 @@ config BLK_DEV_HD endif endmenu + +endif diff --git a/drivers/md/Kconfig b/drivers/md/Kconfig index bf869ed03ee..6dd31a291d8 100644 --- a/drivers/md/Kconfig +++ b/drivers/md/Kconfig @@ -2,6 +2,8 @@ # Block device driver configuration # +if BLOCK + menu "Multi-device support (RAID and LVM)" config MD @@ -251,3 +253,4 @@ config DM_MULTIPATH_EMC endmenu +endif diff --git a/drivers/message/i2o/Kconfig b/drivers/message/i2o/Kconfig index fef67710388..6443392bfff 100644 --- a/drivers/message/i2o/Kconfig +++ b/drivers/message/i2o/Kconfig @@ -88,7 +88,7 @@ config I2O_BUS config I2O_BLOCK tristate "I2O Block OSM" - depends on I2O + depends on I2O && BLOCK ---help--- Include support for the I2O Block OSM. The Block OSM presents disk and other structured block devices to the operating system. If you diff --git a/drivers/mmc/Kconfig b/drivers/mmc/Kconfig index 45bcf098e76..f540bd88dc5 100644 --- a/drivers/mmc/Kconfig +++ b/drivers/mmc/Kconfig @@ -21,7 +21,7 @@ config MMC_DEBUG config MMC_BLOCK tristate "MMC block device driver" - depends on MMC + depends on MMC && BLOCK default y help Say Y here to enable the MMC block device driver support. diff --git a/drivers/mmc/Makefile b/drivers/mmc/Makefile index d2957e35cc6..b1f6e03e7aa 100644 --- a/drivers/mmc/Makefile +++ b/drivers/mmc/Makefile @@ -24,7 +24,8 @@ obj-$(CONFIG_MMC_AU1X) += au1xmmc.o obj-$(CONFIG_MMC_OMAP) += omap.o obj-$(CONFIG_MMC_AT91RM9200) += at91_mci.o -mmc_core-y := mmc.o mmc_queue.o mmc_sysfs.o +mmc_core-y := mmc.o mmc_sysfs.o +mmc_core-$(CONFIG_BLOCK) += mmc_queue.o ifeq ($(CONFIG_MMC_DEBUG),y) EXTRA_CFLAGS += -DDEBUG diff --git a/drivers/mtd/Kconfig b/drivers/mtd/Kconfig index a03e862851d..a304b34c263 100644 --- a/drivers/mtd/Kconfig +++ b/drivers/mtd/Kconfig @@ -166,7 +166,7 @@ config MTD_CHAR config MTD_BLOCK tristate "Caching block device access to MTD devices" - depends on MTD + depends on MTD && BLOCK ---help--- Although most flash chips have an erase size too large to be useful as block devices, it is possible to use MTD devices which are based @@ -188,7 +188,7 @@ config MTD_BLOCK config MTD_BLOCK_RO tristate "Readonly block device access to MTD devices" - depends on MTD_BLOCK!=y && MTD + depends on MTD_BLOCK!=y && MTD && BLOCK help This allows you to mount read-only file systems (such as cramfs) from an MTD device, without the overhead (and danger) of the caching @@ -199,7 +199,7 @@ config MTD_BLOCK_RO config FTL tristate "FTL (Flash Translation Layer) support" - depends on MTD + depends on MTD && BLOCK ---help--- This provides support for the original Flash Translation Layer which is part of the PCMCIA specification. It uses a kind of pseudo- @@ -215,7 +215,7 @@ config FTL config NFTL tristate "NFTL (NAND Flash Translation Layer) support" - depends on MTD + depends on MTD && BLOCK ---help--- This provides support for the NAND Flash Translation Layer which is used on M-Systems' DiskOnChip devices. It uses a kind of pseudo- @@ -238,7 +238,7 @@ config NFTL_RW config INFTL tristate "INFTL (Inverse NAND Flash Translation Layer) support" - depends on MTD + depends on MTD && BLOCK ---help--- This provides support for the Inverse NAND Flash Translation Layer which is used on M-Systems' newer DiskOnChip devices. It @@ -255,7 +255,7 @@ config INFTL config RFD_FTL tristate "Resident Flash Disk (Flash Translation Layer) support" - depends on MTD + depends on MTD && BLOCK ---help--- This provides support for the flash translation layer known as the Resident Flash Disk (RFD), as used by the Embedded BIOS diff --git a/drivers/mtd/devices/Kconfig b/drivers/mtd/devices/Kconfig index 16c02b5ccf7..440f6851da6 100644 --- a/drivers/mtd/devices/Kconfig +++ b/drivers/mtd/devices/Kconfig @@ -136,7 +136,7 @@ config MTDRAM_ABS_POS config MTD_BLOCK2MTD tristate "MTD using block device" - depends on MTD + depends on MTD && BLOCK help This driver allows a block device to appear as an MTD. It would generally be used in the following cases: diff --git a/drivers/s390/block/Kconfig b/drivers/s390/block/Kconfig index 929d6fff615..b250c535450 100644 --- a/drivers/s390/block/Kconfig +++ b/drivers/s390/block/Kconfig @@ -1,4 +1,4 @@ -if S390 +if S390 && BLOCK comment "S/390 block device drivers" depends on S390 diff --git a/drivers/scsi/Kconfig b/drivers/scsi/Kconfig index c4dfcc91ddd..dab082002e6 100644 --- a/drivers/scsi/Kconfig +++ b/drivers/scsi/Kconfig @@ -3,11 +3,13 @@ menu "SCSI device support" config RAID_ATTRS tristate "RAID Transport Class" default n + depends on BLOCK ---help--- Provides RAID config SCSI tristate "SCSI device support" + depends on BLOCK ---help--- If you want to use a SCSI hard disk, SCSI tape drive, SCSI CD-ROM or any other SCSI device under Linux, say Y and make sure that you know diff --git a/fs/Kconfig b/fs/Kconfig index 4fd9efac29a..1453d2d164f 100644 --- a/fs/Kconfig +++ b/fs/Kconfig @@ -4,6 +4,8 @@ menu "File systems" +if BLOCK + config EXT2_FS tristate "Second extended fs support" help @@ -399,6 +401,8 @@ config ROMFS_FS If you don't know whether you need it, then you don't need it: answer N. +endif + config INOTIFY bool "Inotify file change notification support" default y @@ -530,6 +534,7 @@ config FUSE_FS If you want to develop a userspace FS, or if you want to use a filesystem based on FUSE, answer Y or M. +if BLOCK menu "CD-ROM/DVD Filesystems" config ISO9660_FS @@ -597,7 +602,9 @@ config UDF_NLS depends on (UDF_FS=m && NLS) || (UDF_FS=y && NLS=y) endmenu +endif +if BLOCK menu "DOS/FAT/NT Filesystems" config FAT_FS @@ -782,6 +789,7 @@ config NTFS_RW It is perfectly safe to say N here. endmenu +endif menu "Pseudo filesystems" @@ -939,7 +947,7 @@ menu "Miscellaneous filesystems" config ADFS_FS tristate "ADFS file system support (EXPERIMENTAL)" - depends on EXPERIMENTAL + depends on BLOCK && EXPERIMENTAL help The Acorn Disc Filing System is the standard file system of the RiscOS operating system which runs on Acorn's ARM-based Risc PC @@ -967,7 +975,7 @@ config ADFS_FS_RW config AFFS_FS tristate "Amiga FFS file system support (EXPERIMENTAL)" - depends on EXPERIMENTAL + depends on BLOCK && EXPERIMENTAL help The Fast File System (FFS) is the common file system used on hard disks by Amiga(tm) systems since AmigaOS Version 1.3 (34.20). Say Y @@ -989,7 +997,7 @@ config AFFS_FS config HFS_FS tristate "Apple Macintosh file system support (EXPERIMENTAL)" - depends on EXPERIMENTAL + depends on BLOCK && EXPERIMENTAL select NLS help If you say Y here, you will be able to mount Macintosh-formatted @@ -1002,6 +1010,7 @@ config HFS_FS config HFSPLUS_FS tristate "Apple Extended HFS file system support" + depends on BLOCK select NLS select NLS_UTF8 help @@ -1015,7 +1024,7 @@ config HFSPLUS_FS config BEFS_FS tristate "BeOS file system (BeFS) support (read only) (EXPERIMENTAL)" - depends on EXPERIMENTAL + depends on BLOCK && EXPERIMENTAL select NLS help The BeOS File System (BeFS) is the native file system of Be, Inc's @@ -1042,7 +1051,7 @@ config BEFS_DEBUG config BFS_FS tristate "BFS file system support (EXPERIMENTAL)" - depends on EXPERIMENTAL + depends on BLOCK && EXPERIMENTAL help Boot File System (BFS) is a file system used under SCO UnixWare to allow the bootloader access to the kernel image and other important @@ -1064,7 +1073,7 @@ config BFS_FS config EFS_FS tristate "EFS file system support (read only) (EXPERIMENTAL)" - depends on EXPERIMENTAL + depends on BLOCK && EXPERIMENTAL help EFS is an older file system used for non-ISO9660 CD-ROMs and hard disk partitions by SGI's IRIX operating system (IRIX 6.0 and newer @@ -1079,7 +1088,7 @@ config EFS_FS config JFFS_FS tristate "Journalling Flash File System (JFFS) support" - depends on MTD + depends on MTD && BLOCK help JFFS is the Journaling Flash File System developed by Axis Communications in Sweden, aimed at providing a crash/powerdown-safe @@ -1264,6 +1273,7 @@ endchoice config CRAMFS tristate "Compressed ROM file system support (cramfs)" + depends on BLOCK select ZLIB_INFLATE help Saying Y here includes support for CramFs (Compressed ROM File @@ -1283,6 +1293,7 @@ config CRAMFS config VXFS_FS tristate "FreeVxFS file system support (VERITAS VxFS(TM) compatible)" + depends on BLOCK help FreeVxFS is a file system driver that support the VERITAS VxFS(TM) file system format. VERITAS VxFS(TM) is the standard file system @@ -1300,6 +1311,7 @@ config VXFS_FS config HPFS_FS tristate "OS/2 HPFS file system support" + depends on BLOCK help OS/2 is IBM's operating system for PC's, the same as Warp, and HPFS is the file system used for organizing files on OS/2 hard disk @@ -1316,6 +1328,7 @@ config HPFS_FS config QNX4FS_FS tristate "QNX4 file system support (read only)" + depends on BLOCK help This is the file system used by the real-time operating systems QNX 4 and QNX 6 (the latter is also called QNX RTP). @@ -1343,6 +1356,7 @@ config QNX4FS_RW config SYSV_FS tristate "System V/Xenix/V7/Coherent file system support" + depends on BLOCK help SCO, Xenix and Coherent are commercial Unix systems for Intel machines, and Version 7 was used on the DEC PDP-11. Saying Y @@ -1381,6 +1395,7 @@ config SYSV_FS config UFS_FS tristate "UFS file system support (read only)" + depends on BLOCK help BSD and derivate versions of Unix (such as SunOS, FreeBSD, NetBSD, OpenBSD and NeXTstep) use a file system called UFS. Some System V @@ -1959,11 +1974,13 @@ config GENERIC_ACL endmenu +if BLOCK menu "Partition Types" source "fs/partitions/Kconfig" endmenu +endif source "fs/nls/Kconfig" diff --git a/fs/Makefile b/fs/Makefile index 46b8cfe497b..a503e6ce0f3 100644 --- a/fs/Makefile +++ b/fs/Makefile @@ -5,12 +5,18 @@ # Rewritten to use lists instead of if-statements. # -obj-y := open.o read_write.o file_table.o buffer.o bio.o super.o \ - block_dev.o char_dev.o stat.o exec.o pipe.o namei.o fcntl.o \ +obj-y := open.o read_write.o file_table.o super.o \ + char_dev.o stat.o exec.o pipe.o namei.o fcntl.o \ ioctl.o readdir.o select.o fifo.o locks.o dcache.o inode.o \ attr.o bad_inode.o file.o filesystems.o namespace.o aio.o \ - seq_file.o xattr.o libfs.o fs-writeback.o mpage.o direct-io.o \ - ioprio.o pnode.o drop_caches.o splice.o sync.o + seq_file.o xattr.o libfs.o fs-writeback.o \ + pnode.o drop_caches.o splice.o sync.o + +ifeq ($(CONFIG_BLOCK),y) +obj-y += buffer.o bio.o block_dev.o direct-io.o mpage.o ioprio.o +else +obj-y += no-block.o +endif obj-$(CONFIG_INOTIFY) += inotify.o obj-$(CONFIG_INOTIFY_USER) += inotify_user.o diff --git a/fs/compat_ioctl.c b/fs/compat_ioctl.c index e1a56437040..64b34533ede 100644 --- a/fs/compat_ioctl.c +++ b/fs/compat_ioctl.c @@ -645,6 +645,7 @@ out: } #endif +#ifdef CONFIG_BLOCK struct hd_geometry32 { unsigned char heads; unsigned char sectors; @@ -869,6 +870,7 @@ static int sg_grt_trans(unsigned int fd, unsigned int cmd, unsigned long arg) } return err; } +#endif /* CONFIG_BLOCK */ struct sock_fprog32 { unsigned short len; @@ -992,6 +994,7 @@ static int ppp_ioctl_trans(unsigned int fd, unsigned int cmd, unsigned long arg) } +#ifdef CONFIG_BLOCK struct mtget32 { compat_long_t mt_type; compat_long_t mt_resid; @@ -1164,6 +1167,7 @@ static int cdrom_ioctl_trans(unsigned int fd, unsigned int cmd, unsigned long ar return err; } +#endif /* CONFIG_BLOCK */ #ifdef CONFIG_VT @@ -1491,6 +1495,7 @@ ret_einval(unsigned int fd, unsigned int cmd, unsigned long arg) return -EINVAL; } +#ifdef CONFIG_BLOCK static int broken_blkgetsize(unsigned int fd, unsigned int cmd, unsigned long arg) { /* The mkswap binary hard codes it to Intel value :-((( */ @@ -1525,12 +1530,14 @@ static int blkpg_ioctl_trans(unsigned int fd, unsigned int cmd, unsigned long ar return sys_ioctl(fd, cmd, (unsigned long)a); } +#endif static int ioc_settimeout(unsigned int fd, unsigned int cmd, unsigned long arg) { return rw_long(fd, AUTOFS_IOC_SETTIMEOUT, arg); } +#ifdef CONFIG_BLOCK /* Fix sizeof(sizeof()) breakage */ #define BLKBSZGET_32 _IOR(0x12,112,int) #define BLKBSZSET_32 _IOW(0x12,113,int) @@ -1551,6 +1558,7 @@ static int do_blkgetsize64(unsigned int fd, unsigned int cmd, { return sys_ioctl(fd, BLKGETSIZE64, (unsigned long)compat_ptr(arg)); } +#endif /* Bluetooth ioctls */ #define HCIUARTSETPROTO _IOW('U', 200, int) @@ -1571,6 +1579,7 @@ static int do_blkgetsize64(unsigned int fd, unsigned int cmd, #define HIDPGETCONNLIST _IOR('H', 210, int) #define HIDPGETCONNINFO _IOR('H', 211, int) +#ifdef CONFIG_BLOCK struct floppy_struct32 { compat_uint_t size; compat_uint_t sect; @@ -1895,6 +1904,7 @@ out: kfree(karg); return err; } +#endif struct mtd_oob_buf32 { u_int32_t start; @@ -1936,6 +1946,7 @@ static int mtd_rw_oob(unsigned int fd, unsigned int cmd, unsigned long arg) return err; } +#ifdef CONFIG_BLOCK struct raw32_config_request { compat_int_t raw_minor; @@ -2000,6 +2011,7 @@ static int raw_ioctl(unsigned fd, unsigned cmd, unsigned long arg) } return ret; } +#endif /* CONFIG_BLOCK */ struct serial_struct32 { compat_int_t type; @@ -2606,6 +2618,7 @@ HANDLE_IOCTL(SIOCBRDELIF, dev_ifsioc) HANDLE_IOCTL(SIOCRTMSG, ret_einval) HANDLE_IOCTL(SIOCGSTAMP, do_siocgstamp) #endif +#ifdef CONFIG_BLOCK HANDLE_IOCTL(HDIO_GETGEO, hdio_getgeo) HANDLE_IOCTL(BLKRAGET, w_long) HANDLE_IOCTL(BLKGETSIZE, w_long) @@ -2631,14 +2644,17 @@ HANDLE_IOCTL(FDGETFDCSTAT32, fd_ioctl_trans) HANDLE_IOCTL(FDWERRORGET32, fd_ioctl_trans) HANDLE_IOCTL(SG_IO,sg_ioctl_trans) HANDLE_IOCTL(SG_GET_REQUEST_TABLE, sg_grt_trans) +#endif HANDLE_IOCTL(PPPIOCGIDLE32, ppp_ioctl_trans) HANDLE_IOCTL(PPPIOCSCOMPRESS32, ppp_ioctl_trans) HANDLE_IOCTL(PPPIOCSPASS32, ppp_sock_fprog_ioctl_trans) HANDLE_IOCTL(PPPIOCSACTIVE32, ppp_sock_fprog_ioctl_trans) +#ifdef CONFIG_BLOCK HANDLE_IOCTL(MTIOCGET32, mt_ioctl_trans) HANDLE_IOCTL(MTIOCPOS32, mt_ioctl_trans) HANDLE_IOCTL(CDROMREADAUDIO, cdrom_ioctl_trans) HANDLE_IOCTL(CDROM_SEND_PACKET, cdrom_ioctl_trans) +#endif #define AUTOFS_IOC_SETTIMEOUT32 _IOWR(0x93,0x64,unsigned int) HANDLE_IOCTL(AUTOFS_IOC_SETTIMEOUT32, ioc_settimeout) #ifdef CONFIG_VT @@ -2677,12 +2693,14 @@ HANDLE_IOCTL(SONET_SETFRAMING, do_atm_ioctl) HANDLE_IOCTL(SONET_GETFRAMING, do_atm_ioctl) HANDLE_IOCTL(SONET_GETFRSENSE, do_atm_ioctl) /* block stuff */ +#ifdef CONFIG_BLOCK HANDLE_IOCTL(BLKBSZGET_32, do_blkbszget) HANDLE_IOCTL(BLKBSZSET_32, do_blkbszset) HANDLE_IOCTL(BLKGETSIZE64_32, do_blkgetsize64) /* Raw devices */ HANDLE_IOCTL(RAW_SETBIND, raw_ioctl) HANDLE_IOCTL(RAW_GETBIND, raw_ioctl) +#endif /* Serial */ HANDLE_IOCTL(TIOCGSERIAL, serial_struct_ioctl) HANDLE_IOCTL(TIOCSSERIAL, serial_struct_ioctl) diff --git a/fs/internal.h b/fs/internal.h index f662b703bb9..f07147d6325 100644 --- a/fs/internal.h +++ b/fs/internal.h @@ -14,10 +14,16 @@ /* * block_dev.c */ +#ifdef CONFIG_BLOCK extern struct super_block *blockdev_superblock; extern void __init bdev_cache_init(void); #define sb_is_blkdev_sb(sb) ((sb) == blockdev_superblock) +#else +static inline void bdev_cache_init(void) {} + +#define sb_is_blkdev_sb(sb) 0 +#endif /* * char_dev.c diff --git a/fs/no-block.c b/fs/no-block.c new file mode 100644 index 00000000000..d269a93d346 --- /dev/null +++ b/fs/no-block.c @@ -0,0 +1,22 @@ +/* no-block.c: implementation of routines required for non-BLOCK configuration + * + * Copyright (C) 2006 Red Hat, Inc. All Rights Reserved. + * Written by David Howells (dhowells@redhat.com) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +#include +#include + +static int no_blkdev_open(struct inode * inode, struct file * filp) +{ + return -ENODEV; +} + +const struct file_operations def_blk_fops = { + .open = no_blkdev_open, +}; diff --git a/fs/partitions/Makefile b/fs/partitions/Makefile index d713ce6b3e1..67e665fdb7f 100644 --- a/fs/partitions/Makefile +++ b/fs/partitions/Makefile @@ -2,7 +2,7 @@ # Makefile for the linux kernel. # -obj-y := check.o +obj-$(CONFIG_BLOCK) := check.o obj-$(CONFIG_ACORN_PARTITION) += acorn.o obj-$(CONFIG_AMIGA_PARTITION) += amiga.o diff --git a/fs/proc/proc_misc.c b/fs/proc/proc_misc.c index 5bbd6089605..66bc425f2f3 100644 --- a/fs/proc/proc_misc.c +++ b/fs/proc/proc_misc.c @@ -277,12 +277,15 @@ static int devinfo_show(struct seq_file *f, void *v) if (i == 0) seq_printf(f, "Character devices:\n"); chrdev_show(f, i); - } else { + } +#ifdef CONFIG_BLOCK + else { i -= CHRDEV_MAJOR_HASH_SIZE; if (i == 0) seq_printf(f, "\nBlock devices:\n"); blkdev_show(f, i); } +#endif return 0; } @@ -355,6 +358,7 @@ static int stram_read_proc(char *page, char **start, off_t off, } #endif +#ifdef CONFIG_BLOCK extern struct seq_operations partitions_op; static int partitions_open(struct inode *inode, struct file *file) { @@ -378,6 +382,7 @@ static struct file_operations proc_diskstats_operations = { .llseek = seq_lseek, .release = seq_release, }; +#endif #ifdef CONFIG_MODULES extern struct seq_operations modules_op; @@ -695,7 +700,9 @@ void __init proc_misc_init(void) entry->proc_fops = &proc_kmsg_operations; create_seq_entry("devices", 0, &proc_devinfo_operations); create_seq_entry("cpuinfo", 0, &proc_cpuinfo_operations); +#ifdef CONFIG_BLOCK create_seq_entry("partitions", 0, &proc_partitions_operations); +#endif create_seq_entry("stat", 0, &proc_stat_operations); create_seq_entry("interrupts", 0, &proc_interrupts_operations); #ifdef CONFIG_SLAB @@ -707,7 +714,9 @@ void __init proc_misc_init(void) create_seq_entry("buddyinfo",S_IRUGO, &fragmentation_file_operations); create_seq_entry("vmstat",S_IRUGO, &proc_vmstat_file_operations); create_seq_entry("zoneinfo",S_IRUGO, &proc_zoneinfo_file_operations); +#ifdef CONFIG_BLOCK create_seq_entry("diskstats", 0, &proc_diskstats_operations); +#endif #ifdef CONFIG_MODULES create_seq_entry("modules", 0, &proc_modules_operations); #endif diff --git a/fs/quota.c b/fs/quota.c index d6a2be826e2..b9dae76a0b6 100644 --- a/fs/quota.c +++ b/fs/quota.c @@ -337,6 +337,34 @@ static int do_quotactl(struct super_block *sb, int type, int cmd, qid_t id, void return 0; } +/* + * look up a superblock on which quota ops will be performed + * - use the name of a block device to find the superblock thereon + */ +static inline struct super_block *quotactl_block(const char __user *special) +{ +#ifdef CONFIG_BLOCK + struct block_device *bdev; + struct super_block *sb; + char *tmp = getname(special); + + if (IS_ERR(tmp)) + return ERR_PTR(PTR_ERR(tmp)); + bdev = lookup_bdev(tmp); + putname(tmp); + if (IS_ERR(bdev)) + return ERR_PTR(PTR_ERR(bdev)); + sb = get_super(bdev); + bdput(bdev); + if (!sb) + return ERR_PTR(-ENODEV); + + return sb; +#else + return ERR_PTR(-ENODEV); +#endif +} + /* * This is the system call interface. This communicates with * the user-level programs. Currently this only supports diskquota @@ -347,25 +375,15 @@ asmlinkage long sys_quotactl(unsigned int cmd, const char __user *special, qid_t { uint cmds, type; struct super_block *sb = NULL; - struct block_device *bdev; - char *tmp; int ret; cmds = cmd >> SUBCMDSHIFT; type = cmd & SUBCMDMASK; if (cmds != Q_SYNC || special) { - tmp = getname(special); - if (IS_ERR(tmp)) - return PTR_ERR(tmp); - bdev = lookup_bdev(tmp); - putname(tmp); - if (IS_ERR(bdev)) - return PTR_ERR(bdev); - sb = get_super(bdev); - bdput(bdev); - if (!sb) - return -ENODEV; + sb = quotactl_block(special); + if (IS_ERR(sb)) + return PTR_ERR(sb); } ret = check_quotactl_valid(sb, type, cmds, id); diff --git a/fs/super.c b/fs/super.c index 15671cd048b..aec99ddbe53 100644 --- a/fs/super.c +++ b/fs/super.c @@ -571,8 +571,10 @@ int do_remount_sb(struct super_block *sb, int flags, void *data, int force) { int retval; +#ifdef CONFIG_BLOCK if (!(flags & MS_RDONLY) && bdev_read_only(sb->s_bdev)) return -EACCES; +#endif if (flags & MS_RDONLY) acct_auto_close(sb); shrink_dcache_sb(sb); @@ -692,6 +694,7 @@ void kill_litter_super(struct super_block *sb) EXPORT_SYMBOL(kill_litter_super); +#ifdef CONFIG_BLOCK static int set_bdev_super(struct super_block *s, void *data) { s->s_bdev = data; @@ -787,6 +790,7 @@ void kill_block_super(struct super_block *sb) } EXPORT_SYMBOL(kill_block_super); +#endif int get_sb_nodev(struct file_system_type *fs_type, int flags, void *data, diff --git a/fs/xfs/Kconfig b/fs/xfs/Kconfig index 26b364c9d62..35115bca036 100644 --- a/fs/xfs/Kconfig +++ b/fs/xfs/Kconfig @@ -1,5 +1,6 @@ config XFS_FS tristate "XFS filesystem support" + depends on BLOCK help XFS is a high performance journaling filesystem which originated on the SGI IRIX platform. It is completely multi-threaded, can diff --git a/include/linux/blkdev.h b/include/linux/blkdev.h index 2c01a90998a..3e36107d342 100644 --- a/include/linux/blkdev.h +++ b/include/linux/blkdev.h @@ -16,6 +16,22 @@ #include +#ifdef CONFIG_LBD +# include +# define sector_div(a, b) do_div(a, b) +#else +# define sector_div(n, b)( \ +{ \ + int _res; \ + _res = (n) % (b); \ + (n) /= (b); \ + _res; \ +} \ +) +#endif + +#ifdef CONFIG_BLOCK + struct scsi_ioctl_command; struct request_queue; @@ -818,24 +834,30 @@ struct work_struct; int kblockd_schedule_work(struct work_struct *work); void kblockd_flush(void); -#ifdef CONFIG_LBD -# include -# define sector_div(a, b) do_div(a, b) -#else -# define sector_div(n, b)( \ -{ \ - int _res; \ - _res = (n) % (b); \ - (n) /= (b); \ - _res; \ -} \ -) -#endif - #define MODULE_ALIAS_BLOCKDEV(major,minor) \ MODULE_ALIAS("block-major-" __stringify(major) "-" __stringify(minor)) #define MODULE_ALIAS_BLOCKDEV_MAJOR(major) \ MODULE_ALIAS("block-major-" __stringify(major) "-*") +#else /* CONFIG_BLOCK */ +/* + * stubs for when the block layer is configured out + */ +#define buffer_heads_over_limit 0 + +static inline long blk_congestion_wait(int rw, long timeout) +{ + return timeout; +} + +static inline long nr_blockdev_pages(void) +{ + return 0; +} + +static inline void exit_io_context(void) {} + +#endif /* CONFIG_BLOCK */ + #endif diff --git a/include/linux/buffer_head.h b/include/linux/buffer_head.h index 64b508e35d2..131ffd37e71 100644 --- a/include/linux/buffer_head.h +++ b/include/linux/buffer_head.h @@ -14,6 +14,8 @@ #include #include +#ifdef CONFIG_BLOCK + enum bh_state_bits { BH_Uptodate, /* Contains valid data */ BH_Dirty, /* Is dirty */ @@ -301,4 +303,18 @@ static inline void lock_buffer(struct buffer_head *bh) } extern int __set_page_dirty_buffers(struct page *page); + +#else /* CONFIG_BLOCK */ + +static inline void buffer_init(void) {} +static inline int try_to_free_buffers(struct page *page) { return 1; } +static inline int sync_blockdev(struct block_device *bdev) { return 0; } +static inline int inode_has_buffers(struct inode *inode) { return 0; } +static inline void invalidate_inode_buffers(struct inode *inode) {} +static inline int remove_inode_buffers(struct inode *inode) { return 1; } +static inline int sync_mapping_buffers(struct address_space *mapping) { return 0; } +static inline void invalidate_bdev(struct block_device *bdev, int destroy_dirty_buffers) {} + + +#endif /* CONFIG_BLOCK */ #endif /* _LINUX_BUFFER_HEAD_H */ diff --git a/include/linux/compat_ioctl.h b/include/linux/compat_ioctl.h index 98d40e08ba6..d61ef595153 100644 --- a/include/linux/compat_ioctl.h +++ b/include/linux/compat_ioctl.h @@ -90,6 +90,7 @@ COMPATIBLE_IOCTL(FDTWADDLE) COMPATIBLE_IOCTL(FDFMTTRK) COMPATIBLE_IOCTL(FDRAWCMD) /* 0x12 */ +#ifdef CONFIG_BLOCK COMPATIBLE_IOCTL(BLKRASET) COMPATIBLE_IOCTL(BLKROSET) COMPATIBLE_IOCTL(BLKROGET) @@ -103,6 +104,7 @@ COMPATIBLE_IOCTL(BLKTRACESETUP) COMPATIBLE_IOCTL(BLKTRACETEARDOWN) ULONG_IOCTL(BLKRASET) ULONG_IOCTL(BLKFRASET) +#endif /* RAID */ COMPATIBLE_IOCTL(RAID_VERSION) COMPATIBLE_IOCTL(GET_ARRAY_INFO) diff --git a/include/linux/elevator.h b/include/linux/elevator.h index 9c5a04f6114..b3370ef5164 100644 --- a/include/linux/elevator.h +++ b/include/linux/elevator.h @@ -3,6 +3,8 @@ #include +#ifdef CONFIG_BLOCK + typedef int (elevator_merge_fn) (request_queue_t *, struct request **, struct bio *); @@ -203,4 +205,5 @@ enum { __val; \ }) +#endif /* CONFIG_BLOCK */ #endif diff --git a/include/linux/fs.h b/include/linux/fs.h index b73a47582db..5baf3a15340 100644 --- a/include/linux/fs.h +++ b/include/linux/fs.h @@ -1482,6 +1482,7 @@ extern void __init vfs_caches_init(unsigned long); extern void putname(const char *name); #endif +#ifdef CONFIG_BLOCK extern int register_blkdev(unsigned int, const char *); extern int unregister_blkdev(unsigned int, const char *); extern struct block_device *bdget(dev_t); @@ -1490,11 +1491,15 @@ extern void bd_forget(struct inode *inode); extern void bdput(struct block_device *); extern struct block_device *open_by_devnum(dev_t, unsigned); extern struct block_device *open_partition_by_devnum(dev_t, unsigned); -extern const struct file_operations def_blk_fops; extern const struct address_space_operations def_blk_aops; +#else +static inline void bd_forget(struct inode *inode) {} +#endif +extern const struct file_operations def_blk_fops; extern const struct file_operations def_chr_fops; extern const struct file_operations bad_sock_fops; extern const struct file_operations def_fifo_fops; +#ifdef CONFIG_BLOCK extern int ioctl_by_bdev(struct block_device *, unsigned, unsigned long); extern int blkdev_ioctl(struct inode *, struct file *, unsigned, unsigned long); extern long compat_blkdev_ioctl(struct file *, unsigned, unsigned long); @@ -1510,6 +1515,7 @@ extern void bd_release_from_disk(struct block_device *, struct gendisk *); #define bd_claim_by_disk(bdev, holder, disk) bd_claim(bdev, holder) #define bd_release_from_disk(bdev, disk) bd_release(bdev) #endif +#endif /* fs/char_dev.c */ #define CHRDEV_MAJOR_HASH_SIZE 255 @@ -1523,14 +1529,19 @@ extern int chrdev_open(struct inode *, struct file *); extern void chrdev_show(struct seq_file *,off_t); /* fs/block_dev.c */ -#define BLKDEV_MAJOR_HASH_SIZE 255 #define BDEVNAME_SIZE 32 /* Largest string for a blockdev identifier */ + +#ifdef CONFIG_BLOCK +#define BLKDEV_MAJOR_HASH_SIZE 255 extern const char *__bdevname(dev_t, char *buffer); extern const char *bdevname(struct block_device *bdev, char *buffer); extern struct block_device *lookup_bdev(const char *); extern struct block_device *open_bdev_excl(const char *, int, void *); extern void close_bdev_excl(struct block_device *); extern void blkdev_show(struct seq_file *,off_t); +#else +#define BLKDEV_MAJOR_HASH_SIZE 0 +#endif extern void init_special_inode(struct inode *, umode_t, dev_t); @@ -1544,6 +1555,7 @@ extern const struct file_operations rdwr_fifo_fops; extern int fs_may_remount_ro(struct super_block *); +#ifdef CONFIG_BLOCK /* * return READ, READA, or WRITE */ @@ -1555,9 +1567,10 @@ extern int fs_may_remount_ro(struct super_block *); #define bio_data_dir(bio) ((bio)->bi_rw & 1) extern int check_disk_change(struct block_device *); -extern int invalidate_inodes(struct super_block *); extern int __invalidate_device(struct block_device *); extern int invalidate_partition(struct gendisk *, int); +#endif +extern int invalidate_inodes(struct super_block *); unsigned long invalidate_mapping_pages(struct address_space *mapping, pgoff_t start, pgoff_t end); unsigned long invalidate_inode_pages(struct address_space *mapping); @@ -1590,7 +1603,9 @@ extern void emergency_sync(void); extern void emergency_remount(void); extern int do_remount_sb(struct super_block *sb, int flags, void *data, int force); +#ifdef CONFIG_BLOCK extern sector_t bmap(struct inode *, sector_t); +#endif extern int notify_change(struct dentry *, struct iattr *); extern int permission(struct inode *, int, struct nameidata *); extern int generic_permission(struct inode *, int, @@ -1673,9 +1688,11 @@ static inline void insert_inode_hash(struct inode *inode) { extern struct file * get_empty_filp(void); extern void file_move(struct file *f, struct list_head *list); extern void file_kill(struct file *f); +#ifdef CONFIG_BLOCK struct bio; extern void submit_bio(int, struct bio *); extern int bdev_read_only(struct block_device *); +#endif extern int set_blocksize(struct block_device *, int); extern int sb_set_blocksize(struct super_block *, int); extern int sb_min_blocksize(struct super_block *, int); @@ -1756,6 +1773,7 @@ static inline void do_generic_file_read(struct file * filp, loff_t *ppos, actor); } +#ifdef CONFIG_BLOCK ssize_t __blockdev_direct_IO(int rw, struct kiocb *iocb, struct inode *inode, struct block_device *bdev, const struct iovec *iov, loff_t offset, unsigned long nr_segs, get_block_t get_block, dio_iodone_t end_io, @@ -1793,6 +1811,7 @@ static inline ssize_t blockdev_direct_IO_own_locking(int rw, struct kiocb *iocb, return __blockdev_direct_IO(rw, iocb, inode, bdev, iov, offset, nr_segs, get_block, end_io, DIO_OWN_LOCKING); } +#endif extern const struct file_operations generic_ro_fops; diff --git a/include/linux/genhd.h b/include/linux/genhd.h index e4af57e87c1..41f276fdd18 100644 --- a/include/linux/genhd.h +++ b/include/linux/genhd.h @@ -11,6 +11,8 @@ #include +#ifdef CONFIG_BLOCK + enum { /* These three have identical behaviour; use the second one if DOS FDISK gets confused about extended/logical partitions starting past cylinder 1023. */ @@ -420,3 +422,5 @@ static inline struct block_device *bdget_disk(struct gendisk *disk, int index) #endif #endif + +#endif diff --git a/include/linux/mpage.h b/include/linux/mpage.h index 517c098fde2..cc5fb75af78 100644 --- a/include/linux/mpage.h +++ b/include/linux/mpage.h @@ -9,6 +9,7 @@ * (And no, it doesn't do the #ifdef __MPAGE_H thing, and it doesn't do * nested includes. Get it right in the .c file). */ +#ifdef CONFIG_BLOCK struct writeback_control; typedef int (writepage_t)(struct page *page, struct writeback_control *wbc); @@ -20,3 +21,5 @@ int mpage_writepages(struct address_space *mapping, struct writeback_control *wbc, get_block_t get_block); int mpage_writepage(struct page *page, get_block_t *get_block, struct writeback_control *wbc); + +#endif diff --git a/include/linux/raid/md.h b/include/linux/raid/md.h index eb3e547c8fe..c588709acbb 100644 --- a/include/linux/raid/md.h +++ b/include/linux/raid/md.h @@ -53,6 +53,8 @@ #include #include +#ifdef CONFIG_MD + /* * Different major versions are not compatible. * Different minor versions are only downward compatible. @@ -95,5 +97,6 @@ extern void md_new_event(mddev_t *mddev); extern void md_update_sb(mddev_t * mddev); +#endif /* CONFIG_MD */ #endif diff --git a/include/linux/raid/md_k.h b/include/linux/raid/md_k.h index d2889029585..920b94fe31f 100644 --- a/include/linux/raid/md_k.h +++ b/include/linux/raid/md_k.h @@ -18,6 +18,8 @@ /* and dm-bio-list.h is not under include/linux because.... ??? */ #include "../../../drivers/md/dm-bio-list.h" +#ifdef CONFIG_BLOCK + #define LEVEL_MULTIPATH (-4) #define LEVEL_LINEAR (-1) #define LEVEL_FAULTY (-5) @@ -362,5 +364,6 @@ static inline void safe_put_page(struct page *p) if (p) put_page(p); } +#endif /* CONFIG_BLOCK */ #endif diff --git a/include/scsi/scsi_tcq.h b/include/scsi/scsi_tcq.h index bbf66219b76..c247a28259b 100644 --- a/include/scsi/scsi_tcq.h +++ b/include/scsi/scsi_tcq.h @@ -6,7 +6,6 @@ #include #include - #define MSG_SIMPLE_TAG 0x20 #define MSG_HEAD_TAG 0x21 #define MSG_ORDERED_TAG 0x22 @@ -14,6 +13,7 @@ #define SCSI_NO_TAG (-1) /* identify no tag in use */ +#ifdef CONFIG_BLOCK /** * scsi_get_tag_type - get the type of tag the device supports @@ -144,4 +144,5 @@ static inline int scsi_init_shared_tag_map(struct Scsi_Host *shost, int depth) return shost->bqt ? 0 : -ENOMEM; } +#endif /* CONFIG_BLOCK */ #endif /* _SCSI_SCSI_TCQ_H */ diff --git a/init/Kconfig b/init/Kconfig index 4381006dd66..d2eb7a84a26 100644 --- a/init/Kconfig +++ b/init/Kconfig @@ -92,7 +92,7 @@ config LOCALVERSION_AUTO config SWAP bool "Support for paging of anonymous memory (swap)" - depends on MMU + depends on MMU && BLOCK default y help This option allows you to choose whether you want to have support diff --git a/init/do_mounts.c b/init/do_mounts.c index b290aadb1d3..dc1ec0803ef 100644 --- a/init/do_mounts.c +++ b/init/do_mounts.c @@ -285,7 +285,11 @@ void __init mount_block_root(char *name, int flags) { char *fs_names = __getname(); char *p; +#ifdef CONFIG_BLOCK char b[BDEVNAME_SIZE]; +#else + const char *b = name; +#endif get_fs_names(fs_names); retry: @@ -304,7 +308,9 @@ retry: * Allow the user to distinguish between failed sys_open * and bad superblock on root device. */ +#ifdef CONFIG_BLOCK __bdevname(ROOT_DEV, b); +#endif printk("VFS: Cannot open root device \"%s\" or %s\n", root_device_name, b); printk("Please append a correct \"root=\" boot option\n"); @@ -316,7 +322,10 @@ retry: for (p = fs_names; *p; p += strlen(p)+1) printk(" %s", p); printk("\n"); - panic("VFS: Unable to mount root fs on %s", __bdevname(ROOT_DEV, b)); +#ifdef CONFIG_BLOCK + __bdevname(ROOT_DEV, b); +#endif + panic("VFS: Unable to mount root fs on %s", b); out: putname(fs_names); } @@ -387,8 +396,10 @@ void __init mount_root(void) change_floppy("root floppy"); } #endif +#ifdef CONFIG_BLOCK create_dev("/dev/root", ROOT_DEV); mount_block_root("/dev/root", root_mountflags); +#endif } /* diff --git a/kernel/sys_ni.c b/kernel/sys_ni.c index 6991bece67e..7a3b2e75f04 100644 --- a/kernel/sys_ni.c +++ b/kernel/sys_ni.c @@ -134,3 +134,8 @@ cond_syscall(sys_madvise); cond_syscall(sys_mremap); cond_syscall(sys_remap_file_pages); cond_syscall(compat_sys_move_pages); + +/* block-layer dependent */ +cond_syscall(sys_bdflush); +cond_syscall(sys_ioprio_set); +cond_syscall(sys_ioprio_get); diff --git a/mm/Makefile b/mm/Makefile index 4f2166a833b..12b3a4eee88 100644 --- a/mm/Makefile +++ b/mm/Makefile @@ -12,7 +12,7 @@ obj-y := bootmem.o filemap.o mempool.o oom_kill.o fadvise.o \ readahead.o swap.o truncate.o vmscan.o \ prio_tree.o util.o mmzone.o vmstat.o $(mmu-y) -ifeq ($(CONFIG_MMU),y) +ifeq ($(CONFIG_MMU)$(CONFIG_BLOCK),yy) obj-y += bounce.o endif obj-$(CONFIG_SWAP) += page_io.o swap_state.o swapfile.o thrash.o diff --git a/mm/filemap.c b/mm/filemap.c index d6846de0888..c4fe97f5ace 100644 --- a/mm/filemap.c +++ b/mm/filemap.c @@ -2020,6 +2020,7 @@ inline int generic_write_checks(struct file *file, loff_t *pos, size_t *count, i if (unlikely(*pos + *count > inode->i_sb->s_maxbytes)) *count = inode->i_sb->s_maxbytes - *pos; } else { +#ifdef CONFIG_BLOCK loff_t isize; if (bdev_read_only(I_BDEV(inode))) return -EPERM; @@ -2031,6 +2032,9 @@ inline int generic_write_checks(struct file *file, loff_t *pos, size_t *count, i if (*pos + *count > isize) *count = isize - *pos; +#else + return -EPERM; +#endif } return 0; } diff --git a/mm/migrate.c b/mm/migrate.c index 7f50e3ff54c..ba2453f9483 100644 --- a/mm/migrate.c +++ b/mm/migrate.c @@ -409,6 +409,7 @@ int migrate_page(struct address_space *mapping, } EXPORT_SYMBOL(migrate_page); +#ifdef CONFIG_BLOCK /* * Migration function for pages with buffers. This function can only be used * if the underlying filesystem guarantees that no other references to "page" @@ -466,6 +467,7 @@ int buffer_migrate_page(struct address_space *mapping, return 0; } EXPORT_SYMBOL(buffer_migrate_page); +#endif /* * Writeback a page to clean the dirty state diff --git a/mm/page-writeback.c b/mm/page-writeback.c index ecf27839c20..c0d4ce144de 100644 --- a/mm/page-writeback.c +++ b/mm/page-writeback.c @@ -807,9 +807,11 @@ int fastcall set_page_dirty(struct page *page) if (likely(mapping)) { int (*spd)(struct page *) = mapping->a_ops->set_page_dirty; - if (spd) - return (*spd)(page); - return __set_page_dirty_buffers(page); +#ifdef CONFIG_BLOCK + if (!spd) + spd = __set_page_dirty_buffers; +#endif + return (*spd)(page); } if (!PageDirty(page)) { if (!TestSetPageDirty(page)) diff --git a/mm/truncate.c b/mm/truncate.c index cd3e34b816d..8fde6580657 100644 --- a/mm/truncate.c +++ b/mm/truncate.c @@ -35,8 +35,10 @@ void do_invalidatepage(struct page *page, unsigned long offset) { void (*invalidatepage)(struct page *, unsigned long); invalidatepage = page->mapping->a_ops->invalidatepage; +#ifdef CONFIG_BLOCK if (!invalidatepage) invalidatepage = block_invalidatepage; +#endif if (invalidatepage) (*invalidatepage)(page, offset); } -- cgit v1.2.3-70-g09d2 From 1bdfd554be94def718323659173517c5d4a69d25 Mon Sep 17 00:00:00 2001 From: Jeff Garzik Date: Sat, 30 Sep 2006 21:28:22 -0400 Subject: [PATCH] SCSI: fix request flag-related build breakage The ->flags in struct request was split into two variables, in a recent changeset. The merge of this change forgot to update SCSI's libsas, probably because libsas was a very recent merge. Signed-off-by: Jeff Garzik Signed-off-by: Linus Torvalds --- drivers/scsi/libsas/sas_scsi_host.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/scsi') diff --git a/drivers/scsi/libsas/sas_scsi_host.c b/drivers/scsi/libsas/sas_scsi_host.c index 7f9e89bcac7..e46e79355b7 100644 --- a/drivers/scsi/libsas/sas_scsi_host.c +++ b/drivers/scsi/libsas/sas_scsi_host.c @@ -126,7 +126,7 @@ static enum task_attribute sas_scsi_get_task_attr(struct scsi_cmnd *cmd) enum task_attribute ta = TASK_ATTR_SIMPLE; if (cmd->request && blk_rq_tagged(cmd->request)) { if (cmd->device->ordered_tags && - (cmd->request->flags & REQ_HARDBARRIER)) + (cmd->request->cmd_flags & REQ_HARDBARRIER)) ta = TASK_ATTR_HOQ; } return ta; -- cgit v1.2.3-70-g09d2