From 1f61d82490a26dbcde903b33e24f6d11b758b64c Mon Sep 17 00:00:00 2001 From: Matthew Wilcox Date: Tue, 28 Mar 2006 11:03:43 -0500 Subject: [SCSI] Change Kconfig option from IOMAPPED to MMIO Most of the Kconfig options for switching between IO Port and MMIO operations use the opposite sense from sym2. Really, this option should be set at a chipset level rather than per-driver. Signed-off-by: Matthew Wilcox Signed-off-by: James Bottomley --- drivers/scsi/Kconfig | 15 ++++++++------- drivers/scsi/sym53c8xx_2/sym_glue.c | 2 +- drivers/scsi/sym53c8xx_2/sym_hipd.c | 29 +++++++++++++++++------------ 3 files changed, 26 insertions(+), 20 deletions(-) (limited to 'drivers/scsi') diff --git a/drivers/scsi/Kconfig b/drivers/scsi/Kconfig index 52690fecc51..3e7302692db 100644 --- a/drivers/scsi/Kconfig +++ b/drivers/scsi/Kconfig @@ -1079,7 +1079,7 @@ config SCSI_SYM53C8XX_DMA_ADDRESSING_MODE memory using PCI DAC cycles. config SCSI_SYM53C8XX_DEFAULT_TAGS - int "default tagged command queue depth" + int "Default tagged command queue depth" depends on SCSI_SYM53C8XX_2 default "16" help @@ -1090,7 +1090,7 @@ config SCSI_SYM53C8XX_DEFAULT_TAGS exceed CONFIG_SCSI_SYM53C8XX_MAX_TAGS. config SCSI_SYM53C8XX_MAX_TAGS - int "maximum number of queued commands" + int "Maximum number of queued commands" depends on SCSI_SYM53C8XX_2 default "64" help @@ -1099,13 +1099,14 @@ config SCSI_SYM53C8XX_MAX_TAGS possible. The driver supports up to 256 queued commands per device. This value is used as a compiled-in hard limit. -config SCSI_SYM53C8XX_IOMAPPED - bool "use port IO" +config SCSI_SYM53C8XX_MMIO + bool "Use memory mapped IO" depends on SCSI_SYM53C8XX_2 + default y help - If you say Y here, the driver will use port IO to access - the card. This is significantly slower then using memory - mapped IO. Most people should answer N. + Memory mapped IO is faster than Port IO. Most people should + answer Y here, but some machines may have problems. If you have + to answer N here, please report the problem to the maintainer. config SCSI_IPR tristate "IBM Power Linux RAID adapter support" diff --git a/drivers/scsi/sym53c8xx_2/sym_glue.c b/drivers/scsi/sym53c8xx_2/sym_glue.c index 1fffd2b3c65..ec9d93aa160 100644 --- a/drivers/scsi/sym53c8xx_2/sym_glue.c +++ b/drivers/scsi/sym53c8xx_2/sym_glue.c @@ -1874,7 +1874,7 @@ sym_init_device(struct pci_dev *pdev, struct sym_device *device) i = pci_get_base_address(pdev, 1, &device->mmio_base); pci_get_base_address(pdev, i, &device->ram_base); -#ifndef CONFIG_SCSI_SYM53C8XX_IOMAPPED +#ifdef CONFIG_SCSI_SYM53C8XX_MMIO if (device->mmio_base) device->s.ioaddr = pci_iomap(pdev, 1, pci_resource_len(pdev, 1)); diff --git a/drivers/scsi/sym53c8xx_2/sym_hipd.c b/drivers/scsi/sym53c8xx_2/sym_hipd.c index 60850cbe3a8..a95b262bbe8 100644 --- a/drivers/scsi/sym53c8xx_2/sym_hipd.c +++ b/drivers/scsi/sym53c8xx_2/sym_hipd.c @@ -973,8 +973,8 @@ static int sym_prepare_setting(struct Scsi_Host *shost, struct sym_hcb *np, stru * * Has to be called with interrupts disabled. */ -#ifndef CONFIG_SCSI_SYM53C8XX_IOMAPPED -static int sym_regtest (struct sym_hcb *np) +#ifdef CONFIG_SCSI_SYM53C8XX_MMIO +static int sym_regtest(struct sym_hcb *np) { register volatile u32 data; /* @@ -992,20 +992,25 @@ static int sym_regtest (struct sym_hcb *np) #endif printf ("CACHE TEST FAILED: reg dstat-sstat2 readback %x.\n", (unsigned) data); - return (0x10); + return 0x10; } - return (0); + return 0; +} +#else +static inline int sym_regtest(struct sym_hcb *np) +{ + return 0; } #endif -static int sym_snooptest (struct sym_hcb *np) +static int sym_snooptest(struct sym_hcb *np) { - u32 sym_rd, sym_wr, sym_bk, host_rd, host_wr, pc, dstat; - int i, err=0; -#ifndef CONFIG_SCSI_SYM53C8XX_IOMAPPED - err |= sym_regtest (np); - if (err) return (err); -#endif + u32 sym_rd, sym_wr, sym_bk, host_rd, host_wr, pc, dstat; + int i, err; + + err = sym_regtest(np); + if (err) + return err; restart_test: /* * Enable Master Parity Checking as we intend @@ -1094,7 +1099,7 @@ restart_test: err |= 4; } - return (err); + return err; } /* -- cgit v1.2.3-70-g09d2