From a6cce2a79deefb33354561a064f0609a3b342829 Mon Sep 17 00:00:00 2001 From: Brian King Date: Fri, 17 Mar 2006 17:04:15 -0600 Subject: [PATCH] libata: ata_scsi_slave_config cleanup Encapsulate some of ata_scsi_slave_config so that parts can be reused in future SAS patches. Signed-off-by: Brian King Signed-off-by: Jeff Garzik --- drivers/scsi/libata-scsi.c | 62 +++++++++++++++++++++++++++------------------- 1 file changed, 37 insertions(+), 25 deletions(-) (limited to 'drivers/scsi') diff --git a/drivers/scsi/libata-scsi.c b/drivers/scsi/libata-scsi.c index cebf9b31b51..fc547ca295f 100644 --- a/drivers/scsi/libata-scsi.c +++ b/drivers/scsi/libata-scsi.c @@ -662,6 +662,41 @@ void ata_gen_fixed_sense(struct ata_queued_cmd *qc) } } +static void ata_scsi_sdev_config(struct scsi_device *sdev) +{ + sdev->use_10_for_rw = 1; + sdev->use_10_for_ms = 1; +} + +static void ata_scsi_dev_config(struct scsi_device *sdev, + struct ata_device *dev) +{ + unsigned int max_sectors; + + /* TODO: 2048 is an arbitrary number, not the + * hardware maximum. This should be increased to + * 65534 when Jens Axboe's patch for dynamically + * determining max_sectors is merged. + */ + max_sectors = ATA_MAX_SECTORS; + if (dev->flags & ATA_DFLAG_LBA48) + max_sectors = 2048; + if (dev->max_sectors) + max_sectors = dev->max_sectors; + + blk_queue_max_sectors(sdev->request_queue, max_sectors); + + /* + * SATA DMA transfers must be multiples of 4 byte, so + * we need to pad ATAPI transfers using an extra sg. + * Decrement max hw segments accordingly. + */ + if (dev->class == ATA_DEV_ATAPI) { + request_queue_t *q = sdev->request_queue; + blk_queue_max_hw_segments(q, q->max_hw_segments - 1); + } +} + /** * ata_scsi_slave_config - Set SCSI device attributes * @sdev: SCSI device to examine @@ -676,41 +711,18 @@ void ata_gen_fixed_sense(struct ata_queued_cmd *qc) int ata_scsi_slave_config(struct scsi_device *sdev) { - sdev->use_10_for_rw = 1; - sdev->use_10_for_ms = 1; + ata_scsi_sdev_config(sdev); blk_queue_max_phys_segments(sdev->request_queue, LIBATA_MAX_PRD); if (sdev->id < ATA_MAX_DEVICES) { struct ata_port *ap; struct ata_device *dev; - unsigned int max_sectors; ap = (struct ata_port *) &sdev->host->hostdata[0]; dev = &ap->device[sdev->id]; - /* TODO: 2048 is an arbitrary number, not the - * hardware maximum. This should be increased to - * 65534 when Jens Axboe's patch for dynamically - * determining max_sectors is merged. - */ - max_sectors = ATA_MAX_SECTORS; - if (dev->flags & ATA_DFLAG_LBA48) - max_sectors = 2048; - if (dev->max_sectors) - max_sectors = dev->max_sectors; - - blk_queue_max_sectors(sdev->request_queue, max_sectors); - - /* - * SATA DMA transfers must be multiples of 4 byte, so - * we need to pad ATAPI transfers using an extra sg. - * Decrement max hw segments accordingly. - */ - if (dev->class == ATA_DEV_ATAPI) { - request_queue_t *q = sdev->request_queue; - blk_queue_max_hw_segments(q, q->max_hw_segments - 1); - } + ata_scsi_dev_config(sdev, dev); } return 0; /* scsi layer doesn't check return value, sigh */ -- cgit v1.2.3-70-g09d2