From b2b3c121076961333977f485f0d54c22121df920 Mon Sep 17 00:00:00 2001
From: Grant Grundler <grundler@parisc-linux.org>
Date: Mon, 17 Jul 2006 07:22:45 -0600
Subject: [SCSI] sym2: claim only "Storage" class

The follow patch fixes a problem for Matt Taggart.
The Compaq system he had (dl380?) has a SmartArray device that exposes
the 53c1510 device in both RAID and "normal" modes. The difference
is in RAID mode, the smart array driver (IIRC) should claim the
device instead of sym2 driver. Patch below prevents sym2 from
claiming the device when the RAID "daughter board" is attached.

Signed-off-by: Grant Grundler <grundler@parisc-linux.org>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
---
 drivers/scsi/sym53c8xx_2/sym_glue.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'drivers/scsi')

diff --git a/drivers/scsi/sym53c8xx_2/sym_glue.c b/drivers/scsi/sym53c8xx_2/sym_glue.c
index 8c505076c0e..739d3ef46a4 100644
--- a/drivers/scsi/sym53c8xx_2/sym_glue.c
+++ b/drivers/scsi/sym53c8xx_2/sym_glue.c
@@ -2084,7 +2084,7 @@ static struct pci_device_id sym2_id_table[] __devinitdata = {
 	{ PCI_VENDOR_ID_LSI_LOGIC, PCI_DEVICE_ID_NCR_53C860,
 	  PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0UL },
 	{ PCI_VENDOR_ID_LSI_LOGIC, PCI_DEVICE_ID_LSI_53C1510,
-	  PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0UL },
+	  PCI_ANY_ID, PCI_ANY_ID, PCI_CLASS_STORAGE_SCSI<<8,  0xffff00, 0UL },
 	{ PCI_VENDOR_ID_LSI_LOGIC, PCI_DEVICE_ID_NCR_53C896,
 	  PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0UL },
 	{ PCI_VENDOR_ID_LSI_LOGIC, PCI_DEVICE_ID_NCR_53C895,
-- 
cgit v1.2.3-70-g09d2


From 8d4fbd3f978ba49498dc7c6430368c4ff86a09fc Mon Sep 17 00:00:00 2001
From: HighPoint Linux Team <linux@highpoint-tech.com>
Date: Mon, 24 Jul 2006 15:48:54 +0800
Subject: [SCSI] hptiop: wrong register used in hptiop_reset_hba()

IOP reset message should be posted to inbound message register
instead of outbound message register.

Signed-off-by: HighPoint Linux Team <linux@highpoint-tech.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
---
 drivers/scsi/hptiop.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'drivers/scsi')

diff --git a/drivers/scsi/hptiop.c b/drivers/scsi/hptiop.c
index ab2f8b26790..74d4d22e5c0 100644
--- a/drivers/scsi/hptiop.c
+++ b/drivers/scsi/hptiop.c
@@ -577,7 +577,7 @@ static int hptiop_reset_hba(struct hptiop_hba *hba)
 	if (atomic_xchg(&hba->resetting, 1) == 0) {
 		atomic_inc(&hba->reset_count);
 		writel(IOPMU_INBOUND_MSG0_RESET,
-				&hba->iop->outbound_msgaddr0);
+				&hba->iop->inbound_msgaddr0);
 		hptiop_pci_posting_flush(hba->iop);
 	}
 
-- 
cgit v1.2.3-70-g09d2


From d82967c70658a408ea6cae5dc989ba8b2c0999e1 Mon Sep 17 00:00:00 2001
From: Mike Christie <michaelc@cs.wisc.edu>
Date: Mon, 24 Jul 2006 15:47:11 -0500
Subject: [SCSI] iscsi bugfixes: send correct error values to userspace

In the xmit patch we are sending a -EXXX value to iscsi_conn_failure
which is causing userspace to get confused.

We should be sending a ISCSI_ERR_* value that userspace understands.

Signed-off-by: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
---
 drivers/scsi/iscsi_tcp.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

(limited to 'drivers/scsi')

diff --git a/drivers/scsi/iscsi_tcp.c b/drivers/scsi/iscsi_tcp.c
index 848fb2aa4ca..88dafdf45c4 100644
--- a/drivers/scsi/iscsi_tcp.c
+++ b/drivers/scsi/iscsi_tcp.c
@@ -843,7 +843,7 @@ more:
 		       if (rc == -EAGAIN)
 				goto nomore;
 		       else {
-				iscsi_conn_failure(conn, rc);
+				iscsi_conn_failure(conn, ISCSI_ERR_CONN_FAILED);
 				return 0;
 		       }
 		}
@@ -859,7 +859,7 @@ more:
 			}
 			tcp_conn->in_progress = IN_PROGRESS_DATA_RECV;
 		} else if (rc) {
-			iscsi_conn_failure(conn, rc);
+			iscsi_conn_failure(conn, ISCSI_ERR_CONN_FAILED);
 			return 0;
 		}
 	}
@@ -897,7 +897,7 @@ more:
 		if (rc) {
 			if (rc == -EAGAIN)
 				goto again;
-			iscsi_conn_failure(conn, rc);
+			iscsi_conn_failure(conn, ISCSI_ERR_CONN_FAILED);
 			return 0;
 		}
 		tcp_conn->in.copy -= tcp_conn->in.padding;
-- 
cgit v1.2.3-70-g09d2


From b6c395ed0387c824ddf125d3b74b576a2575c149 Mon Sep 17 00:00:00 2001
From: Mike Christie <michaelc@cs.wisc.edu>
Date: Mon, 24 Jul 2006 15:47:15 -0500
Subject: [SCSI] iscsi bugfixes: fix r2t handling

The iscsi tcp code can pluck multiple rt2s from the tasks's r2tqueue
in the xmit code. This can result in the task being queued on the xmit queue
but gettting completed at the same time.

This patch fixes the above bug by making the fifo a list so
we always remove the entry on the list del.

Signed-off-by: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
---
 drivers/scsi/iscsi_tcp.c | 45 +++++++++++-------------
 drivers/scsi/libiscsi.c  | 90 ++++++++++++++++++++----------------------------
 include/scsi/libiscsi.h  | 10 +++++-
 3 files changed, 68 insertions(+), 77 deletions(-)

(limited to 'drivers/scsi')

diff --git a/drivers/scsi/iscsi_tcp.c b/drivers/scsi/iscsi_tcp.c
index 88dafdf45c4..ab324d984b8 100644
--- a/drivers/scsi/iscsi_tcp.c
+++ b/drivers/scsi/iscsi_tcp.c
@@ -185,11 +185,19 @@ iscsi_hdr_extract(struct iscsi_tcp_conn *tcp_conn)
  * must be called with session lock
  */
 static void
-__iscsi_ctask_cleanup(struct iscsi_conn *conn, struct iscsi_cmd_task *ctask)
+iscsi_tcp_cleanup_ctask(struct iscsi_conn *conn, struct iscsi_cmd_task *ctask)
 {
 	struct iscsi_tcp_cmd_task *tcp_ctask = ctask->dd_data;
+	struct iscsi_r2t_info *r2t;
 	struct scsi_cmnd *sc;
 
+	/* flush ctask's r2t queues */
+	while (__kfifo_get(tcp_ctask->r2tqueue, (void*)&r2t, sizeof(void*))) {
+		__kfifo_put(tcp_ctask->r2tpool.queue, (void*)&r2t,
+			    sizeof(void*));
+		debug_scsi("iscsi_tcp_cleanup_ctask pending r2t dropped\n");
+	}
+
 	sc = ctask->sc;
 	if (unlikely(!sc))
 		return;
@@ -374,6 +382,7 @@ iscsi_r2t_rsp(struct iscsi_conn *conn, struct iscsi_cmd_task *ctask)
 		spin_unlock(&session->lock);
 		return 0;
 	}
+
 	rc = __kfifo_get(tcp_ctask->r2tpool.queue, (void*)&r2t, sizeof(void*));
 	BUG_ON(!rc);
 
@@ -399,7 +408,7 @@ iscsi_r2t_rsp(struct iscsi_conn *conn, struct iscsi_cmd_task *ctask)
 	tcp_ctask->exp_r2tsn = r2tsn + 1;
 	tcp_ctask->xmstate |= XMSTATE_SOL_HDR;
 	__kfifo_put(tcp_ctask->r2tqueue, (void*)&r2t, sizeof(void*));
-	__kfifo_put(conn->xmitqueue, (void*)&ctask, sizeof(void*));
+	list_move_tail(&ctask->running, &conn->xmitqueue);
 
 	scsi_queue_work(session->host, &conn->xmitwork);
 	conn->r2t_pdus_cnt++;
@@ -484,7 +493,7 @@ iscsi_tcp_hdr_recv(struct iscsi_conn *conn)
 			goto copy_hdr;
 
 		spin_lock(&session->lock);
-		__iscsi_ctask_cleanup(conn, tcp_conn->in.ctask);
+		iscsi_tcp_cleanup_ctask(conn, tcp_conn->in.ctask);
 		rc = __iscsi_complete_pdu(conn, hdr, NULL, 0);
 		spin_unlock(&session->lock);
 		break;
@@ -745,10 +754,11 @@ static int iscsi_scsi_data_in(struct iscsi_conn *conn)
 done:
 	/* check for non-exceptional status */
 	if (tcp_conn->in.hdr->flags & ISCSI_FLAG_DATA_STATUS) {
-		debug_scsi("done [sc %lx res %d itt 0x%x]\n",
-			   (long)sc, sc->result, ctask->itt);
+		debug_scsi("done [sc %lx res %d itt 0x%x flags 0x%x]\n",
+			   (long)sc, sc->result, ctask->itt,
+			   tcp_conn->in.hdr->flags);
 		spin_lock(&conn->session->lock);
-		__iscsi_ctask_cleanup(conn, ctask);
+		iscsi_tcp_cleanup_ctask(conn, ctask);
 		__iscsi_complete_pdu(conn, tcp_conn->in.hdr, NULL, 0);
 		spin_unlock(&conn->session->lock);
 	}
@@ -769,7 +779,7 @@ iscsi_data_recv(struct iscsi_conn *conn)
 		break;
 	case ISCSI_OP_SCSI_CMD_RSP:
 		spin_lock(&conn->session->lock);
-		__iscsi_ctask_cleanup(conn, tcp_conn->in.ctask);
+		iscsi_tcp_cleanup_ctask(conn, tcp_conn->in.ctask);
 		spin_unlock(&conn->session->lock);
 	case ISCSI_OP_TEXT_RSP:
 	case ISCSI_OP_LOGIN_RSP:
@@ -1308,7 +1318,7 @@ iscsi_tcp_cmd_init(struct iscsi_cmd_task *ctask)
 				    ctask->imm_count -
 				    ctask->unsol_count;
 
-		debug_scsi("cmd [itt %x total %d imm %d imm_data %d "
+		debug_scsi("cmd [itt 0x%x total %d imm %d imm_data %d "
 			   "r2t_data %d]\n",
 			   ctask->itt, ctask->total_length, ctask->imm_count,
 			   ctask->unsol_count, tcp_ctask->r2t_data_count);
@@ -1636,7 +1646,7 @@ handle_xmstate_sol_data(struct iscsi_conn *conn, struct iscsi_cmd_task *ctask)
 	}
 solicit_again:
 	/*
-	 * send Data-Out whitnin this R2T sequence.
+	 * send Data-Out within this R2T sequence.
 	 */
 	if (!r2t->data_count)
 		goto data_out_done;
@@ -1731,7 +1741,7 @@ handle_xmstate_w_pad(struct iscsi_conn *conn, struct iscsi_cmd_task *ctask)
 	struct iscsi_tcp_cmd_task *tcp_ctask = ctask->dd_data;
 	struct iscsi_tcp_conn *tcp_conn = conn->dd_data;
 	struct iscsi_data_task *dtask = tcp_ctask->dtask;
-	int sent, rc;
+	int sent = 0, rc;
 
 	tcp_ctask->xmstate &= ~XMSTATE_W_PAD;
 	iscsi_buf_init_iov(&tcp_ctask->sendbuf, (char*)&tcp_ctask->pad,
@@ -2001,20 +2011,6 @@ iscsi_tcp_conn_bind(struct iscsi_cls_session *cls_session,
 	return 0;
 }
 
-static void
-iscsi_tcp_cleanup_ctask(struct iscsi_conn *conn, struct iscsi_cmd_task *ctask)
-{
-	struct iscsi_tcp_cmd_task *tcp_ctask = ctask->dd_data;
-	struct iscsi_r2t_info *r2t;
-
-	/* flush ctask's r2t queues */
-	while (__kfifo_get(tcp_ctask->r2tqueue, (void*)&r2t, sizeof(void*)))
-		__kfifo_put(tcp_ctask->r2tpool.queue, (void*)&r2t,
-			    sizeof(void*));
-
-	__iscsi_ctask_cleanup(conn, ctask);
-}
-
 static void
 iscsi_tcp_suspend_conn_rx(struct iscsi_conn *conn)
 {
@@ -2057,6 +2053,7 @@ iscsi_tcp_mgmt_init(struct iscsi_conn *conn, struct iscsi_mgmt_task *mtask,
 	iscsi_buf_init_iov(&tcp_mtask->headbuf, (char*)mtask->hdr,
 			   sizeof(struct iscsi_hdr));
 	tcp_mtask->xmstate = XMSTATE_IMM_HDR;
+	tcp_mtask->sent = 0;
 
 	if (mtask->data_count)
 		iscsi_buf_init_iov(&tcp_mtask->sendbuf, (char*)mtask->data,
diff --git a/drivers/scsi/libiscsi.c b/drivers/scsi/libiscsi.c
index 7e6e031cc41..1a8cd20f484 100644
--- a/drivers/scsi/libiscsi.c
+++ b/drivers/scsi/libiscsi.c
@@ -189,6 +189,7 @@ static void iscsi_complete_command(struct iscsi_session *session,
 {
 	struct scsi_cmnd *sc = ctask->sc;
 
+	ctask->state = ISCSI_TASK_COMPLETED;
 	ctask->sc = NULL;
 	list_del_init(&ctask->running);
 	__kfifo_put(session->cmdpool.queue, (void*)&ctask, sizeof(void*));
@@ -568,20 +569,24 @@ static int iscsi_data_xmit(struct iscsi_conn *conn)
 	}
 
 	/* process command queue */
-	while (__kfifo_get(conn->xmitqueue, (void*)&conn->ctask,
-			   sizeof(void*))) {
+	spin_lock_bh(&conn->session->lock);
+	while (!list_empty(&conn->xmitqueue)) {
 		/*
 		 * iscsi tcp may readd the task to the xmitqueue to send
 		 * write data
 		 */
-		spin_lock_bh(&conn->session->lock);
-		if (list_empty(&conn->ctask->running))
-			list_add_tail(&conn->ctask->running, &conn->run_list);
+		conn->ctask = list_entry(conn->xmitqueue.next,
+					 struct iscsi_cmd_task, running);
+		conn->ctask->state = ISCSI_TASK_RUNNING;
+		list_move_tail(conn->xmitqueue.next, &conn->run_list);
 		spin_unlock_bh(&conn->session->lock);
+
 		rc = tt->xmit_cmd_task(conn, conn->ctask);
 		if (rc)
 			goto again;
+		spin_lock_bh(&conn->session->lock);
 	}
+	spin_unlock_bh(&conn->session->lock);
 	/* done with this ctask */
 	conn->ctask = NULL;
 
@@ -691,6 +696,7 @@ int iscsi_queuecommand(struct scsi_cmnd *sc, void (*done)(struct scsi_cmnd *))
 	sc->SCp.phase = session->age;
 	sc->SCp.ptr = (char *)ctask;
 
+	ctask->state = ISCSI_TASK_PENDING;
 	ctask->mtask = NULL;
 	ctask->conn = conn;
 	ctask->sc = sc;
@@ -700,7 +706,7 @@ int iscsi_queuecommand(struct scsi_cmnd *sc, void (*done)(struct scsi_cmnd *))
 
 	session->tt->init_cmd_task(ctask);
 
-	__kfifo_put(conn->xmitqueue, (void*)&ctask, sizeof(void*));
+	list_add_tail(&ctask->running, &conn->xmitqueue);
 	debug_scsi(
 	       "ctask enq [%s cid %d sc %lx itt 0x%x len %d cmdsn %d win %d]\n",
 		sc->sc_data_direction == DMA_TO_DEVICE ? "write" : "read",
@@ -977,31 +983,27 @@ static int iscsi_exec_abort_task(struct scsi_cmnd *sc,
 /*
  * xmit mutex and session lock must be held
  */
-#define iscsi_remove_task(tasktype)					\
-static struct iscsi_##tasktype *					\
-iscsi_remove_##tasktype(struct kfifo *fifo, uint32_t itt)		\
-{									\
-	int i, nr_tasks = __kfifo_len(fifo) / sizeof(void*);		\
-	struct iscsi_##tasktype *task;					\
-									\
-	debug_scsi("searching %d tasks\n", nr_tasks);			\
-									\
-	for (i = 0; i < nr_tasks; i++) {				\
-		__kfifo_get(fifo, (void*)&task, sizeof(void*));		\
-		debug_scsi("check task %u\n", task->itt);		\
-									\
-		if (task->itt == itt) {					\
-			debug_scsi("matched task\n");			\
-			return task;					\
-		}							\
-									\
-		__kfifo_put(fifo, (void*)&task, sizeof(void*));		\
-	}								\
-	return NULL;							\
-}
+static struct iscsi_mgmt_task *
+iscsi_remove_mgmt_task(struct kfifo *fifo, uint32_t itt)
+{
+	int i, nr_tasks = __kfifo_len(fifo) / sizeof(void*);
+	struct iscsi_mgmt_task *task;
+
+	debug_scsi("searching %d tasks\n", nr_tasks);
+
+	for (i = 0; i < nr_tasks; i++) {
+		__kfifo_get(fifo, (void*)&task, sizeof(void*));
+		debug_scsi("check task %u\n", task->itt);
+
+		if (task->itt == itt) {
+			debug_scsi("matched task\n");
+			return task;
+		}
 
-iscsi_remove_task(mgmt_task);
-iscsi_remove_task(cmd_task);
+		__kfifo_put(fifo, (void*)&task, sizeof(void*));
+	}
+	return NULL;
+}
 
 static int iscsi_ctask_mtask_cleanup(struct iscsi_cmd_task *ctask)
 {
@@ -1043,7 +1045,6 @@ int iscsi_eh_abort(struct scsi_cmnd *sc)
 	struct iscsi_cmd_task *ctask = (struct iscsi_cmd_task *)sc->SCp.ptr;
 	struct iscsi_conn *conn = ctask->conn;
 	struct iscsi_session *session = conn->session;
-	struct iscsi_cmd_task *pending_ctask;
 	int rc;
 
 	conn->eh_abort_cnt++;
@@ -1071,17 +1072,8 @@ int iscsi_eh_abort(struct scsi_cmnd *sc)
 		goto failed;
 	}
 
-	/* check for the easy pending cmd abort */
-	pending_ctask = iscsi_remove_cmd_task(conn->xmitqueue, ctask->itt);
-	if (pending_ctask) {
-		/* iscsi_tcp queues write transfers on the xmitqueue */
-		if (list_empty(&pending_ctask->running)) {
-			debug_scsi("found pending task\n");
-			goto success;
-		} else
-			__kfifo_put(conn->xmitqueue, (void*)&pending_ctask,
-				    sizeof(void*));
-	}
+	if (ctask->state == ISCSI_TASK_PENDING)
+		goto success;
 
 	conn->tmabort_state = TMABORT_INITIAL;
 
@@ -1263,6 +1255,7 @@ iscsi_session_setup(struct iscsi_transport *iscsit,
 		if (cmd_task_size)
 			ctask->dd_data = &ctask[1];
 		ctask->itt = cmd_i;
+		INIT_LIST_HEAD(&ctask->running);
 	}
 
 	spin_lock_init(&session->lock);
@@ -1282,6 +1275,7 @@ iscsi_session_setup(struct iscsi_transport *iscsit,
 		if (mgmt_task_size)
 			mtask->dd_data = &mtask[1];
 		mtask->itt = ISCSI_MGMT_ITT_OFFSET + cmd_i;
+		INIT_LIST_HEAD(&mtask->running);
 	}
 
 	if (scsi_add_host(shost, NULL))
@@ -1361,12 +1355,7 @@ iscsi_conn_setup(struct iscsi_cls_session *cls_session, uint32_t conn_idx)
 	conn->tmabort_state = TMABORT_INITIAL;
 	INIT_LIST_HEAD(&conn->run_list);
 	INIT_LIST_HEAD(&conn->mgmt_run_list);
-
-	/* initialize general xmit PDU commands queue */
-	conn->xmitqueue = kfifo_alloc(session->cmds_max * sizeof(void*),
-					GFP_KERNEL, NULL);
-	if (conn->xmitqueue == ERR_PTR(-ENOMEM))
-		goto xmitqueue_alloc_fail;
+	INIT_LIST_HEAD(&conn->xmitqueue);
 
 	/* initialize general immediate & non-immediate PDU commands queue */
 	conn->immqueue = kfifo_alloc(session->mgmtpool_max * sizeof(void*),
@@ -1410,8 +1399,6 @@ login_mtask_alloc_fail:
 mgmtqueue_alloc_fail:
 	kfifo_free(conn->immqueue);
 immqueue_alloc_fail:
-	kfifo_free(conn->xmitqueue);
-xmitqueue_alloc_fail:
 	iscsi_destroy_conn(cls_conn);
 	return NULL;
 }
@@ -1489,7 +1476,6 @@ void iscsi_conn_teardown(struct iscsi_cls_conn *cls_conn)
 		session->cmdsn = session->max_cmdsn = session->exp_cmdsn = 1;
 	spin_unlock_bh(&session->lock);
 
-	kfifo_free(conn->xmitqueue);
 	kfifo_free(conn->immqueue);
 	kfifo_free(conn->mgmtqueue);
 
@@ -1572,7 +1558,7 @@ static void fail_all_commands(struct iscsi_conn *conn)
 	struct iscsi_cmd_task *ctask, *tmp;
 
 	/* flush pending */
-	while (__kfifo_get(conn->xmitqueue, (void*)&ctask, sizeof(void*))) {
+	list_for_each_entry_safe(ctask, tmp, &conn->xmitqueue, running) {
 		debug_scsi("failing pending sc %p itt 0x%x\n", ctask->sc,
 			   ctask->itt);
 		fail_command(conn, ctask, DID_BUS_BUSY << 16);
diff --git a/include/scsi/libiscsi.h b/include/scsi/libiscsi.h
index ba2760802de..e71d6e96eca 100644
--- a/include/scsi/libiscsi.h
+++ b/include/scsi/libiscsi.h
@@ -83,6 +83,12 @@ struct iscsi_mgmt_task {
 	struct list_head	running;
 };
 
+enum {
+	ISCSI_TASK_COMPLETED,
+	ISCSI_TASK_PENDING,
+	ISCSI_TASK_RUNNING,
+};
+
 struct iscsi_cmd_task {
 	/*
 	 * Becuae LLDs allocate their hdr differently, this is a pointer to
@@ -101,6 +107,8 @@ struct iscsi_cmd_task {
 	struct iscsi_conn	*conn;		/* used connection    */
 	struct iscsi_mgmt_task	*mtask;		/* tmf mtask in progr */
 
+	/* state set/tested under session->lock */
+	int			state;
 	struct list_head	running;	/* running cmd list */
 	void			*dd_data;	/* driver/transport data */
 };
@@ -134,7 +142,7 @@ struct iscsi_conn {
 	struct kfifo		*immqueue;	/* immediate xmit queue */
 	struct kfifo		*mgmtqueue;	/* mgmt (control) xmit queue */
 	struct list_head	mgmt_run_list;	/* list of control tasks */
-	struct kfifo		*xmitqueue;	/* data-path cmd queue */
+	struct list_head	xmitqueue;	/* data-path cmd queue */
 	struct list_head	run_list;	/* list of cmds in progress */
 	struct work_struct	xmitwork;	/* per-conn. xmit workqueue */
 	/*
-- 
cgit v1.2.3-70-g09d2


From 275fd7d129fdd16d1dc0ec6a8d60bd6b72a76e31 Mon Sep 17 00:00:00 2001
From: Mike Christie <michaelc@cs.wisc.edu>
Date: Mon, 24 Jul 2006 15:47:17 -0500
Subject: [SCSI] iscsi bugfixes: handle data rsp errors

if iscsi_data_rsp fails we must bail out. Since the pdu values like
data length are invalid we cannot continue to process the data since
it could over run buffers.

This fixes a bug with cisco 5428s where that target is sending
too much data.

Signed-off-by: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
---
 drivers/scsi/iscsi_tcp.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

(limited to 'drivers/scsi')

diff --git a/drivers/scsi/iscsi_tcp.c b/drivers/scsi/iscsi_tcp.c
index ab324d984b8..7d784596a1e 100644
--- a/drivers/scsi/iscsi_tcp.c
+++ b/drivers/scsi/iscsi_tcp.c
@@ -486,6 +486,8 @@ iscsi_tcp_hdr_recv(struct iscsi_conn *conn)
 	case ISCSI_OP_SCSI_DATA_IN:
 		tcp_conn->in.ctask = session->cmds[itt];
 		rc = iscsi_data_rsp(conn, tcp_conn->in.ctask);
+		if (rc)
+			return rc;
 		/* fall through */
 	case ISCSI_OP_SCSI_CMD_RSP:
 		tcp_conn->in.ctask = session->cmds[itt];
@@ -532,7 +534,7 @@ copy_hdr:
 	 * skbs to complete the command then we have to copy the header
 	 * for later use
 	 */
-	if (tcp_conn->in.zero_copy_hdr && tcp_conn->in.copy <
+	if (tcp_conn->in.zero_copy_hdr && tcp_conn->in.copy <=
 	   (tcp_conn->in.datalen + tcp_conn->in.padding +
 	    (conn->datadgst_en ? 4 : 0))) {
 		debug_tcp("Copying header for later use. in.copy %d in.datalen"
-- 
cgit v1.2.3-70-g09d2


From 7ea8b82847293c2311cf08fc3ed31ab0e452a27e Mon Sep 17 00:00:00 2001
From: Mike Christie <michaelc@cs.wisc.edu>
Date: Mon, 24 Jul 2006 15:47:22 -0500
Subject: [SCSI] iscsi bugfixes: fix abort handling

Abort handler fixes.

If a connection is dropped and reconnected while an abort is
running then we should assume the recovery code will clean up
the abort. Not doing so causes a oops.

And if a command completes then we get the status for the abort, we do not
need to call into the LLD to cleanup the resources. Doing this causes
and oops in iser because it ends up freeing some resources twice.

Signed-off-by: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
---
 drivers/scsi/libiscsi.c | 71 ++++++++++++++++++++++++++++++++-----------------
 include/scsi/libiscsi.h |  1 +
 2 files changed, 47 insertions(+), 25 deletions(-)

(limited to 'drivers/scsi')

diff --git a/drivers/scsi/libiscsi.c b/drivers/scsi/libiscsi.c
index 1a8cd20f484..4e2ca8f7d9a 100644
--- a/drivers/scsi/libiscsi.c
+++ b/drivers/scsi/libiscsi.c
@@ -276,6 +276,25 @@ out:
 	return rc;
 }
 
+static void iscsi_tmf_rsp(struct iscsi_conn *conn, struct iscsi_hdr *hdr)
+{
+	struct iscsi_tm_rsp *tmf = (struct iscsi_tm_rsp *)hdr;
+
+	conn->exp_statsn = be32_to_cpu(hdr->statsn) + 1;
+	conn->tmfrsp_pdus_cnt++;
+
+	if (conn->tmabort_state != TMABORT_INITIAL)
+		return;
+
+	if (tmf->response == ISCSI_TMF_RSP_COMPLETE)
+		conn->tmabort_state = TMABORT_SUCCESS;
+	else if (tmf->response == ISCSI_TMF_RSP_NO_TASK)
+		conn->tmabort_state = TMABORT_NOT_FOUND;
+	else
+		conn->tmabort_state = TMABORT_FAILED;
+	wake_up(&conn->ehwait);
+}
+
 /**
  * __iscsi_complete_pdu - complete pdu
  * @conn: iscsi conn
@@ -361,16 +380,7 @@ int __iscsi_complete_pdu(struct iscsi_conn *conn, struct iscsi_hdr *hdr,
 				break;
 			}
 
-			conn->exp_statsn = be32_to_cpu(hdr->statsn) + 1;
-			conn->tmfrsp_pdus_cnt++;
-			if (conn->tmabort_state == TMABORT_INITIAL) {
-				conn->tmabort_state =
-					((struct iscsi_tm_rsp *)hdr)->
-					response == ISCSI_TMF_RSP_COMPLETE ?
-						TMABORT_SUCCESS:TMABORT_FAILED;
-				/* unblock eh_abort() */
-				wake_up(&conn->ehwait);
-			}
+			iscsi_tmf_rsp(conn, hdr);
 			break;
 		case ISCSI_OP_NOOP_IN:
 			if (hdr->ttt != ISCSI_RESERVED_TAG) {
@@ -1029,12 +1039,13 @@ static void fail_command(struct iscsi_conn *conn, struct iscsi_cmd_task *ctask,
 {
 	struct scsi_cmnd *sc;
 
-	conn->session->tt->cleanup_cmd_task(conn, ctask);
-	iscsi_ctask_mtask_cleanup(ctask);
-
 	sc = ctask->sc;
 	if (!sc)
 		return;
+
+	conn->session->tt->cleanup_cmd_task(conn, ctask);
+	iscsi_ctask_mtask_cleanup(ctask);
+
 	sc->result = err;
 	sc->resid = sc->request_bufflen;
 	iscsi_complete_command(conn->session, ctask);
@@ -1062,8 +1073,11 @@ int iscsi_eh_abort(struct scsi_cmnd *sc)
 		goto failed;
 
 	/* ctask completed before time out */
-	if (!ctask->sc)
-		goto success;
+	if (!ctask->sc) {
+		spin_unlock_bh(&session->lock);
+		debug_scsi("sc completed while abort in progress\n");
+		goto success_rel_mutex;
+	}
 
 	/* what should we do here ? */
 	if (conn->ctask == ctask) {
@@ -1073,7 +1087,7 @@ int iscsi_eh_abort(struct scsi_cmnd *sc)
 	}
 
 	if (ctask->state == ISCSI_TASK_PENDING)
-		goto success;
+		goto success_cleanup;
 
 	conn->tmabort_state = TMABORT_INITIAL;
 
@@ -1081,25 +1095,31 @@ int iscsi_eh_abort(struct scsi_cmnd *sc)
 	rc = iscsi_exec_abort_task(sc, ctask);
 	spin_lock_bh(&session->lock);
 
-	iscsi_ctask_mtask_cleanup(ctask);
 	if (rc || sc->SCp.phase != session->age ||
 	    session->state != ISCSI_STATE_LOGGED_IN)
 		goto failed;
+	iscsi_ctask_mtask_cleanup(ctask);
 
-	/* ctask completed before tmf abort response */
-	if (!ctask->sc) {
-		debug_scsi("sc completed while abort in progress\n");
-		goto success;
-	}
-
-	if (conn->tmabort_state != TMABORT_SUCCESS) {
+	switch (conn->tmabort_state) {
+	case TMABORT_SUCCESS:
+		goto success_cleanup;
+	case TMABORT_NOT_FOUND:
+		if (!ctask->sc) {
+			/* ctask completed before tmf abort response */
+			spin_unlock_bh(&session->lock);
+			debug_scsi("sc completed while abort in progress\n");
+			goto success_rel_mutex;
+		}
+		/* fall through */
+	default:
+		/* timedout or failed */
 		spin_unlock_bh(&session->lock);
 		iscsi_conn_failure(conn, ISCSI_ERR_CONN_FAILED);
 		spin_lock_bh(&session->lock);
 		goto failed;
 	}
 
-success:
+success_cleanup:
 	debug_scsi("abort success [sc %lx itt 0x%x]\n", (long)sc, ctask->itt);
 	spin_unlock_bh(&session->lock);
 
@@ -1113,6 +1133,7 @@ success:
 	spin_unlock(&session->lock);
 	write_unlock_bh(conn->recv_lock);
 
+success_rel_mutex:
 	mutex_unlock(&conn->xmitmutex);
 	return SUCCESS;
 
diff --git a/include/scsi/libiscsi.h b/include/scsi/libiscsi.h
index e71d6e96eca..3f69f7e58f8 100644
--- a/include/scsi/libiscsi.h
+++ b/include/scsi/libiscsi.h
@@ -60,6 +60,7 @@ struct iscsi_nopin;
 #define TMABORT_SUCCESS			0x1
 #define TMABORT_FAILED			0x2
 #define TMABORT_TIMEDOUT		0x3
+#define TMABORT_NOT_FOUND		0x4
 
 /* Connection suspend "bit" */
 #define ISCSI_SUSPEND_BIT		1
-- 
cgit v1.2.3-70-g09d2


From 1c83469d36a9dd30dbf1fb9fc5ca3be3a0e64ff4 Mon Sep 17 00:00:00 2001
From: Mike Christie <michaelc@cs.wisc.edu>
Date: Mon, 24 Jul 2006 15:47:26 -0500
Subject: [SCSI] iscsi bugfixes: fix oops when iser is flushing io

When we enter recovery and flush the running commands
we cannot freee the connection before flushing the commands.
Some commands may have a reference to the connection
that needs to be released before. iscsi_stop was forcing
the term and suspend too early and was causing a oops
in iser, so this patch removes those callbacks all together
and allows the LLD to handle that detail.

Signed-off-by: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
---
 drivers/infiniband/ulp/iser/iscsi_iser.c | 22 +----------
 drivers/scsi/iscsi_tcp.c                 | 67 ++++++++++++++------------------
 drivers/scsi/libiscsi.c                  | 12 ++----
 include/scsi/scsi_transport_iscsi.h      |  4 --
 4 files changed, 34 insertions(+), 71 deletions(-)

(limited to 'drivers/scsi')

diff --git a/drivers/infiniband/ulp/iser/iscsi_iser.c b/drivers/infiniband/ulp/iser/iscsi_iser.c
index 34b0da5cfa0..1437d7ee3b1 100644
--- a/drivers/infiniband/ulp/iser/iscsi_iser.c
+++ b/drivers/infiniband/ulp/iser/iscsi_iser.c
@@ -378,21 +378,6 @@ iscsi_iser_conn_start(struct iscsi_cls_conn *cls_conn)
 	return iser_conn_set_full_featured_mode(conn);
 }
 
-static void
-iscsi_iser_conn_terminate(struct iscsi_conn *conn)
-{
-	struct iscsi_iser_conn *iser_conn = conn->dd_data;
-	struct iser_conn *ib_conn = iser_conn->ib_conn;
-
-	BUG_ON(!ib_conn);
-	/* starts conn teardown process, waits until all previously   *
-	 * posted buffers get flushed, deallocates all conn resources */
-	iser_conn_terminate(ib_conn);
-	iser_conn->ib_conn = NULL;
-	conn->recv_lock = NULL;
-}
-
-
 static struct iscsi_transport iscsi_iser_transport;
 
 static struct iscsi_cls_session *
@@ -555,13 +540,13 @@ iscsi_iser_ep_poll(__u64 ep_handle, int timeout_ms)
 static void
 iscsi_iser_ep_disconnect(__u64 ep_handle)
 {
-	struct iser_conn *ib_conn = iscsi_iser_ib_conn_lookup(ep_handle);
+	struct iser_conn *ib_conn;
 
+	ib_conn = iscsi_iser_ib_conn_lookup(ep_handle);
 	if (!ib_conn)
 		return;
 
 	iser_err("ib conn %p state %d\n",ib_conn, ib_conn->state);
-
 	iser_conn_terminate(ib_conn);
 }
 
@@ -614,9 +599,6 @@ static struct iscsi_transport iscsi_iser_transport = {
 	.get_session_param	= iscsi_session_get_param,
 	.start_conn             = iscsi_iser_conn_start,
 	.stop_conn              = iscsi_conn_stop,
-	/* these are called as part of conn recovery */
-	.suspend_conn_recv	= NULL, /* FIXME is/how this relvant to iser? */
-	.terminate_conn		= iscsi_iser_conn_terminate,
 	/* IO */
 	.send_pdu		= iscsi_conn_send_pdu,
 	.get_stats		= iscsi_iser_conn_get_stats,
diff --git a/drivers/scsi/iscsi_tcp.c b/drivers/scsi/iscsi_tcp.c
index 7d784596a1e..b6c68be6b86 100644
--- a/drivers/scsi/iscsi_tcp.c
+++ b/drivers/scsi/iscsi_tcp.c
@@ -1040,9 +1040,8 @@ iscsi_conn_set_callbacks(struct iscsi_conn *conn)
 }
 
 static void
-iscsi_conn_restore_callbacks(struct iscsi_conn *conn)
+iscsi_conn_restore_callbacks(struct iscsi_tcp_conn *tcp_conn)
 {
-	struct iscsi_tcp_conn *tcp_conn = conn->dd_data;
 	struct sock *sk = tcp_conn->sock->sk;
 
 	/* restore socket callbacks, see also: iscsi_conn_set_callbacks() */
@@ -1932,6 +1931,23 @@ tcp_conn_alloc_fail:
 	return NULL;
 }
 
+static void
+iscsi_tcp_release_conn(struct iscsi_conn *conn)
+{
+	struct iscsi_tcp_conn *tcp_conn = conn->dd_data;
+
+	if (!tcp_conn->sock)
+		return;
+
+	sock_hold(tcp_conn->sock->sk);
+	iscsi_conn_restore_callbacks(tcp_conn);
+	sock_put(tcp_conn->sock->sk);
+
+	sock_release(tcp_conn->sock);
+	tcp_conn->sock = NULL;
+	conn->recv_lock = NULL;
+}
+
 static void
 iscsi_tcp_conn_destroy(struct iscsi_cls_conn *cls_conn)
 {
@@ -1942,6 +1958,7 @@ iscsi_tcp_conn_destroy(struct iscsi_cls_conn *cls_conn)
 	if (conn->hdrdgst_en || conn->datadgst_en)
 		digest = 1;
 
+	iscsi_tcp_release_conn(conn);
 	iscsi_conn_teardown(cls_conn);
 
 	/* now free tcp_conn */
@@ -1965,6 +1982,15 @@ iscsi_tcp_conn_destroy(struct iscsi_cls_conn *cls_conn)
 	kfree(tcp_conn);
 }
 
+static void
+iscsi_tcp_conn_stop(struct iscsi_cls_conn *cls_conn, int flag)
+{
+	struct iscsi_conn *conn = cls_conn->dd_data;
+
+	iscsi_conn_stop(cls_conn, flag);
+	iscsi_tcp_release_conn(conn);
+}
+
 static int
 iscsi_tcp_conn_bind(struct iscsi_cls_session *cls_session,
 		    struct iscsi_cls_conn *cls_conn, uint64_t transport_eph,
@@ -2013,38 +2039,6 @@ iscsi_tcp_conn_bind(struct iscsi_cls_session *cls_session,
 	return 0;
 }
 
-static void
-iscsi_tcp_suspend_conn_rx(struct iscsi_conn *conn)
-{
-	struct iscsi_tcp_conn *tcp_conn = conn->dd_data;
-	struct sock *sk;
-
-	if (!tcp_conn->sock)
-		return;
-
-	sk = tcp_conn->sock->sk;
-	write_lock_bh(&sk->sk_callback_lock);
-	set_bit(ISCSI_SUSPEND_BIT, &conn->suspend_rx);
-	write_unlock_bh(&sk->sk_callback_lock);
-}
-
-static void
-iscsi_tcp_terminate_conn(struct iscsi_conn *conn)
-{
-	struct iscsi_tcp_conn *tcp_conn = conn->dd_data;
-
-	if (!tcp_conn->sock)
-		return;
-
-	sock_hold(tcp_conn->sock->sk);
-	iscsi_conn_restore_callbacks(conn);
-	sock_put(tcp_conn->sock->sk);
-
-	sock_release(tcp_conn->sock);
-	tcp_conn->sock = NULL;
-	conn->recv_lock = NULL;
-}
-
 /* called with host lock */
 static void
 iscsi_tcp_mgmt_init(struct iscsi_conn *conn, struct iscsi_mgmt_task *mtask,
@@ -2413,10 +2407,7 @@ static struct iscsi_transport iscsi_tcp_transport = {
 	.get_conn_param		= iscsi_tcp_conn_get_param,
 	.get_session_param	= iscsi_session_get_param,
 	.start_conn		= iscsi_conn_start,
-	.stop_conn		= iscsi_conn_stop,
-	/* these are called as part of conn recovery */
-	.suspend_conn_recv	= iscsi_tcp_suspend_conn_rx,
-	.terminate_conn		= iscsi_tcp_terminate_conn,
+	.stop_conn		= iscsi_tcp_conn_stop,
 	/* IO */
 	.send_pdu		= iscsi_conn_send_pdu,
 	.get_stats		= iscsi_conn_get_stats,
diff --git a/drivers/scsi/libiscsi.c b/drivers/scsi/libiscsi.c
index 4e2ca8f7d9a..36f520b9260 100644
--- a/drivers/scsi/libiscsi.c
+++ b/drivers/scsi/libiscsi.c
@@ -1440,12 +1440,6 @@ void iscsi_conn_teardown(struct iscsi_cls_conn *cls_conn)
 
 	set_bit(ISCSI_SUSPEND_BIT, &conn->suspend_tx);
 	mutex_lock(&conn->xmitmutex);
-	if (conn->c_stage == ISCSI_CONN_INITIAL_STAGE) {
-		if (session->tt->suspend_conn_recv)
-			session->tt->suspend_conn_recv(conn);
-
-		session->tt->terminate_conn(conn);
-	}
 
 	spin_lock_bh(&session->lock);
 	conn->c_stage = ISCSI_CONN_CLEANUP_WAIT;
@@ -1622,8 +1616,9 @@ static void iscsi_start_session_recovery(struct iscsi_session *session,
 	set_bit(ISCSI_SUSPEND_BIT, &conn->suspend_tx);
 	spin_unlock_bh(&session->lock);
 
-	if (session->tt->suspend_conn_recv)
-		session->tt->suspend_conn_recv(conn);
+	write_lock_bh(conn->recv_lock);
+	set_bit(ISCSI_SUSPEND_BIT, &conn->suspend_rx);
+	write_unlock_bh(conn->recv_lock);
 
 	mutex_lock(&conn->xmitmutex);
 	/*
@@ -1642,7 +1637,6 @@ static void iscsi_start_session_recovery(struct iscsi_session *session,
 		}
 	}
 
-	session->tt->terminate_conn(conn);
 	/*
 	 * flush queues.
 	 */
diff --git a/include/scsi/scsi_transport_iscsi.h b/include/scsi/scsi_transport_iscsi.h
index 5a3df1d7085..39e833260bd 100644
--- a/include/scsi/scsi_transport_iscsi.h
+++ b/include/scsi/scsi_transport_iscsi.h
@@ -57,8 +57,6 @@ struct sockaddr;
  * @stop_conn:		suspend/recover/terminate connection
  * @send_pdu:		send iSCSI PDU, Login, Logout, NOP-Out, Reject, Text.
  * @session_recovery_timedout: notify LLD a block during recovery timed out
- * @suspend_conn_recv:	susepend the recv side of the connection
- * @termincate_conn:	destroy socket connection. Called with mutex lock.
  * @init_cmd_task:	Initialize a iscsi_cmd_task and any internal structs.
  *			Called from queuecommand with session lock held.
  * @init_mgmt_task:	Initialize a iscsi_mgmt_task and any internal structs.
@@ -112,8 +110,6 @@ struct iscsi_transport {
 			 char *data, uint32_t data_size);
 	void (*get_stats) (struct iscsi_cls_conn *conn,
 			   struct iscsi_stats *stats);
-	void (*suspend_conn_recv) (struct iscsi_conn *conn);
-	void (*terminate_conn) (struct iscsi_conn *conn);
 	void (*init_cmd_task) (struct iscsi_cmd_task *ctask);
 	void (*init_mgmt_task) (struct iscsi_conn *conn,
 				struct iscsi_mgmt_task *mtask,
-- 
cgit v1.2.3-70-g09d2


From 63f75cc8a7e6ce453e38a7b90cdcae83d63f1ea7 Mon Sep 17 00:00:00 2001
From: Mike Christie <michaelc@cs.wisc.edu>
Date: Mon, 24 Jul 2006 15:47:29 -0500
Subject: [SCSI] iscsi bugfixes: fix oops when removing session

We are touching the cls_session after we have freed
it. This causes a oops.

Signed-off-by: Or Gerlitz  <ogerlitz@voltaire.com>
Signed-off-by: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
---
 drivers/scsi/libiscsi.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

(limited to 'drivers/scsi')

diff --git a/drivers/scsi/libiscsi.c b/drivers/scsi/libiscsi.c
index 36f520b9260..c989bc6180b 100644
--- a/drivers/scsi/libiscsi.c
+++ b/drivers/scsi/libiscsi.c
@@ -1337,6 +1337,7 @@ void iscsi_session_teardown(struct iscsi_cls_session *cls_session)
 {
 	struct Scsi_Host *shost = iscsi_session_to_shost(cls_session);
 	struct iscsi_session *session = iscsi_hostdata(shost->hostdata);
+	struct module *owner = cls_session->transport->owner;
 
 	scsi_remove_host(shost);
 
@@ -1345,7 +1346,7 @@ void iscsi_session_teardown(struct iscsi_cls_session *cls_session)
 
 	iscsi_destroy_session(cls_session);
 	scsi_host_put(shost);
-	module_put(cls_session->transport->owner);
+	module_put(owner);
 }
 EXPORT_SYMBOL_GPL(iscsi_session_teardown);
 
-- 
cgit v1.2.3-70-g09d2


From 9aaa2b4621280b6de1ecfb6dd7cd5cbe59fd1264 Mon Sep 17 00:00:00 2001
From: Mike Christie <michaelc@cs.wisc.edu>
Date: Mon, 24 Jul 2006 15:47:34 -0500
Subject: [SCSI] iscsi bugfixes: dont use GFP_KERNEL for sending errors

iscsi_tcp can send error events from soft irq context so we
cannot use GFP_KERNEL.

Signed-off-by: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
---
 drivers/scsi/scsi_transport_iscsi.c | 10 +++++-----
 1 file changed, 5 insertions(+), 5 deletions(-)

(limited to 'drivers/scsi')

diff --git a/drivers/scsi/scsi_transport_iscsi.c b/drivers/scsi/scsi_transport_iscsi.c
index 7b9e8fa1a4e..30a47c13309 100644
--- a/drivers/scsi/scsi_transport_iscsi.c
+++ b/drivers/scsi/scsi_transport_iscsi.c
@@ -634,13 +634,13 @@ mempool_zone_get_skb(struct mempool_zone *zone)
 }
 
 static int
-iscsi_broadcast_skb(struct mempool_zone *zone, struct sk_buff *skb)
+iscsi_broadcast_skb(struct mempool_zone *zone, struct sk_buff *skb, gfp_t gfp)
 {
 	unsigned long flags;
 	int rc;
 
 	skb_get(skb);
-	rc = netlink_broadcast(nls, skb, 0, 1, GFP_KERNEL);
+	rc = netlink_broadcast(nls, skb, 0, 1, gfp);
 	if (rc < 0) {
 		mempool_free(skb, zone->pool);
 		printk(KERN_ERR "iscsi: can not broadcast skb (%d)\n", rc);
@@ -749,7 +749,7 @@ void iscsi_conn_error(struct iscsi_cls_conn *conn, enum iscsi_err error)
 	ev->r.connerror.cid = conn->cid;
 	ev->r.connerror.sid = iscsi_conn_get_sid(conn);
 
-	iscsi_broadcast_skb(conn->z_error, skb);
+	iscsi_broadcast_skb(conn->z_error, skb, GFP_ATOMIC);
 
 	dev_printk(KERN_INFO, &conn->dev, "iscsi: detected conn error (%d)\n",
 		   error);
@@ -895,7 +895,7 @@ int iscsi_if_destroy_session_done(struct iscsi_cls_conn *conn)
 	 * this will occur if the daemon is not up, so we just warn
 	 * the user and when the daemon is restarted it will handle it
 	 */
-	rc = iscsi_broadcast_skb(conn->z_pdu, skb);
+	rc = iscsi_broadcast_skb(conn->z_pdu, skb, GFP_KERNEL);
 	if (rc < 0)
 		dev_printk(KERN_ERR, &conn->dev, "Cannot notify userspace of "
 			  "session destruction event. Check iscsi daemon\n");
@@ -958,7 +958,7 @@ int iscsi_if_create_session_done(struct iscsi_cls_conn *conn)
 	 * this will occur if the daemon is not up, so we just warn
 	 * the user and when the daemon is restarted it will handle it
 	 */
-	rc = iscsi_broadcast_skb(conn->z_pdu, skb);
+	rc = iscsi_broadcast_skb(conn->z_pdu, skb, GFP_KERNEL);
 	if (rc < 0)
 		dev_printk(KERN_ERR, &conn->dev, "Cannot notify userspace of "
 			  "session creation event. Check iscsi daemon\n");
-- 
cgit v1.2.3-70-g09d2


From c8dc1e523b0f1e6dd71cdabd8c7d7587c6dc27f9 Mon Sep 17 00:00:00 2001
From: Mike Christie <michaelc@cs.wisc.edu>
Date: Mon, 24 Jul 2006 15:47:39 -0500
Subject: [SCSI] iscsi bugfixes: reduce memory allocations

We currently try to allocate a max_recv_data_segment_length
which can be very large (default is 64K), and common uses
are up to 1MB. It is very very difficult to allocte this
much contiguous memory and it turns out we never even use it.
We really only need a couple of pages, so this patch has us
allocates just what we know what we need today.

Later if vendors start adding vendor specific data and
we need to handle large buffers we can do this, but for
the last 4 years we have not seen anyone do this or request
it.

Signed-off-by: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
---
 drivers/scsi/iscsi_tcp.c | 83 ++++++++++++++----------------------------------
 drivers/scsi/iscsi_tcp.h |  2 --
 drivers/scsi/libiscsi.c  | 10 ++++--
 include/scsi/libiscsi.h  |  8 +++++
 4 files changed, 38 insertions(+), 65 deletions(-)

(limited to 'drivers/scsi')

diff --git a/drivers/scsi/iscsi_tcp.c b/drivers/scsi/iscsi_tcp.c
index b6c68be6b86..aa20adc79f0 100644
--- a/drivers/scsi/iscsi_tcp.c
+++ b/drivers/scsi/iscsi_tcp.c
@@ -511,13 +511,28 @@ iscsi_tcp_hdr_recv(struct iscsi_conn *conn)
 		break;
 	case ISCSI_OP_LOGIN_RSP:
 	case ISCSI_OP_TEXT_RSP:
-	case ISCSI_OP_LOGOUT_RSP:
-	case ISCSI_OP_NOOP_IN:
 	case ISCSI_OP_REJECT:
 	case ISCSI_OP_ASYNC_EVENT:
+		/*
+		 * It is possible that we could get a PDU with a buffer larger
+		 * than 8K, but there are no targets that currently do this.
+		 * For now we fail until we find a vendor that needs it
+		 */
+		if (DEFAULT_MAX_RECV_DATA_SEGMENT_LENGTH <
+		    tcp_conn->in.datalen) {
+			printk(KERN_ERR "iscsi_tcp: received buffer of len %u "
+			      "but conn buffer is only %u (opcode %0x)\n",
+			      tcp_conn->in.datalen,
+			      DEFAULT_MAX_RECV_DATA_SEGMENT_LENGTH, opcode);
+			rc = ISCSI_ERR_PROTO;
+			break;
+		}
+
 		if (tcp_conn->in.datalen)
 			goto copy_hdr;
 	/* fall through */
+	case ISCSI_OP_LOGOUT_RSP:
+	case ISCSI_OP_NOOP_IN:
 	case ISCSI_OP_SCSI_TMFUNC_RSP:
 		rc = iscsi_complete_pdu(conn, hdr, NULL, 0);
 		break;
@@ -625,9 +640,9 @@ iscsi_ctask_copy(struct iscsi_tcp_conn *tcp_conn, struct iscsi_cmd_task *ctask,
  *	byte counters.
  **/
 static inline int
-iscsi_tcp_copy(struct iscsi_tcp_conn *tcp_conn)
+iscsi_tcp_copy(struct iscsi_conn *conn)
 {
-	void *buf = tcp_conn->data;
+	struct iscsi_tcp_conn *tcp_conn = conn->dd_data;
 	int buf_size = tcp_conn->in.datalen;
 	int buf_left = buf_size - tcp_conn->data_copied;
 	int size = min(tcp_conn->in.copy, buf_left);
@@ -638,7 +653,7 @@ iscsi_tcp_copy(struct iscsi_tcp_conn *tcp_conn)
 	BUG_ON(size <= 0);
 
 	rc = skb_copy_bits(tcp_conn->in.skb, tcp_conn->in.offset,
-			   (char*)buf + tcp_conn->data_copied, size);
+			   (char*)conn->data + tcp_conn->data_copied, size);
 	BUG_ON(rc);
 
 	tcp_conn->in.offset += size;
@@ -785,22 +800,21 @@ iscsi_data_recv(struct iscsi_conn *conn)
 		spin_unlock(&conn->session->lock);
 	case ISCSI_OP_TEXT_RSP:
 	case ISCSI_OP_LOGIN_RSP:
-	case ISCSI_OP_NOOP_IN:
 	case ISCSI_OP_ASYNC_EVENT:
 	case ISCSI_OP_REJECT:
 		/*
 		 * Collect data segment to the connection's data
 		 * placeholder
 		 */
-		if (iscsi_tcp_copy(tcp_conn)) {
+		if (iscsi_tcp_copy(conn)) {
 			rc = -EAGAIN;
 			goto exit;
 		}
 
-		rc = iscsi_complete_pdu(conn, tcp_conn->in.hdr, tcp_conn->data,
+		rc = iscsi_complete_pdu(conn, tcp_conn->in.hdr, conn->data,
 					tcp_conn->in.datalen);
 		if (!rc && conn->datadgst_en && opcode != ISCSI_OP_LOGIN_RSP)
-			iscsi_recv_digest_update(tcp_conn, tcp_conn->data,
+			iscsi_recv_digest_update(tcp_conn, conn->data,
 			  			tcp_conn->in.datalen);
 		break;
 	default:
@@ -1911,21 +1925,9 @@ iscsi_tcp_conn_create(struct iscsi_cls_session *cls_session, uint32_t conn_idx)
 	tcp_conn->in_progress = IN_PROGRESS_WAIT_HEADER;
 	/* initial operational parameters */
 	tcp_conn->hdr_size = sizeof(struct iscsi_hdr);
-	tcp_conn->data_size = DEFAULT_MAX_RECV_DATA_SEGMENT_LENGTH;
-
-	/* allocate initial PDU receive place holder */
-	if (tcp_conn->data_size <= PAGE_SIZE)
-		tcp_conn->data = kmalloc(tcp_conn->data_size, GFP_KERNEL);
-	else
-		tcp_conn->data = (void*)__get_free_pages(GFP_KERNEL,
-					get_order(tcp_conn->data_size));
-	if (!tcp_conn->data)
-		goto max_recv_dlenght_alloc_fail;
 
 	return cls_conn;
 
-max_recv_dlenght_alloc_fail:
-	kfree(tcp_conn);
 tcp_conn_alloc_fail:
 	iscsi_conn_teardown(cls_conn);
 	return NULL;
@@ -1973,12 +1975,6 @@ iscsi_tcp_conn_destroy(struct iscsi_cls_conn *cls_conn)
 			crypto_free_tfm(tcp_conn->data_rx_tfm);
 	}
 
-	/* free conn->data, size = MaxRecvDataSegmentLength */
-	if (tcp_conn->data_size <= PAGE_SIZE)
-		kfree(tcp_conn->data);
-	else
-		free_pages((unsigned long)tcp_conn->data,
-			   get_order(tcp_conn->data_size));
 	kfree(tcp_conn);
 }
 
@@ -2131,39 +2127,6 @@ iscsi_conn_set_param(struct iscsi_cls_conn *cls_conn, enum iscsi_param param,
 	int value;
 
 	switch(param) {
-	case ISCSI_PARAM_MAX_RECV_DLENGTH: {
-		char *saveptr = tcp_conn->data;
-		gfp_t flags = GFP_KERNEL;
-
-		sscanf(buf, "%d", &value);
-		if (tcp_conn->data_size >= value) {
-			iscsi_set_param(cls_conn, param, buf, buflen);
-			break;
-		}
-
-		spin_lock_bh(&session->lock);
-		if (conn->stop_stage == STOP_CONN_RECOVER)
-			flags = GFP_ATOMIC;
-		spin_unlock_bh(&session->lock);
-
-		if (value <= PAGE_SIZE)
-			tcp_conn->data = kmalloc(value, flags);
-		else
-			tcp_conn->data = (void*)__get_free_pages(flags,
-							     get_order(value));
-		if (tcp_conn->data == NULL) {
-			tcp_conn->data = saveptr;
-			return -ENOMEM;
-		}
-		if (tcp_conn->data_size <= PAGE_SIZE)
-			kfree(saveptr);
-		else
-			free_pages((unsigned long)saveptr,
-				   get_order(tcp_conn->data_size));
-		iscsi_set_param(cls_conn, param, buf, buflen);
-		tcp_conn->data_size = value;
-		break;
-		}
 	case ISCSI_PARAM_HDRDGST_EN:
 		iscsi_set_param(cls_conn, param, buf, buflen);
 		tcp_conn->hdr_size = sizeof(struct iscsi_hdr);
diff --git a/drivers/scsi/iscsi_tcp.h b/drivers/scsi/iscsi_tcp.h
index 808302832e6..6a4ee704e46 100644
--- a/drivers/scsi/iscsi_tcp.h
+++ b/drivers/scsi/iscsi_tcp.h
@@ -78,8 +78,6 @@ struct iscsi_tcp_conn {
 	char			hdrext[4*sizeof(__u16) +
 				    sizeof(__u32)];
 	int			data_copied;
-	char			*data;		/* data placeholder */
-	int			data_size;	/* actual recv_dlength */
 	int			stop_stage;	/* conn_stop() flag: *
 						 * stop to recover,  *
 						 * stop to terminate */
diff --git a/drivers/scsi/libiscsi.c b/drivers/scsi/libiscsi.c
index c989bc6180b..03b3dee4900 100644
--- a/drivers/scsi/libiscsi.c
+++ b/drivers/scsi/libiscsi.c
@@ -360,6 +360,10 @@ int __iscsi_complete_pdu(struct iscsi_conn *conn, struct iscsi_hdr *hdr,
 
 		switch(opcode) {
 		case ISCSI_OP_LOGOUT_RSP:
+			if (datalen) {
+				rc = ISCSI_ERR_PROTO;
+				break;
+			}
 			conn->exp_statsn = be32_to_cpu(hdr->statsn) + 1;
 			/* fall through */
 		case ISCSI_OP_LOGIN_RSP:
@@ -383,7 +387,7 @@ int __iscsi_complete_pdu(struct iscsi_conn *conn, struct iscsi_hdr *hdr,
 			iscsi_tmf_rsp(conn, hdr);
 			break;
 		case ISCSI_OP_NOOP_IN:
-			if (hdr->ttt != ISCSI_RESERVED_TAG) {
+			if (hdr->ttt != ISCSI_RESERVED_TAG || datalen) {
 				rc = ISCSI_ERR_PROTO;
 				break;
 			}
@@ -1405,7 +1409,7 @@ iscsi_conn_setup(struct iscsi_cls_session *cls_session, uint32_t conn_idx)
 	data = kmalloc(DEFAULT_MAX_RECV_DATA_SEGMENT_LENGTH, GFP_KERNEL);
 	if (!data)
 		goto login_mtask_data_alloc_fail;
-	conn->login_mtask->data = data;
+	conn->login_mtask->data = conn->data = data;
 
 	init_timer(&conn->tmabort_timer);
 	mutex_init(&conn->xmitmutex);
@@ -1477,7 +1481,7 @@ void iscsi_conn_teardown(struct iscsi_cls_conn *cls_conn)
 	}
 
 	spin_lock_bh(&session->lock);
-	kfree(conn->login_mtask->data);
+	kfree(conn->data);
 	__kfifo_put(session->mgmtpool.queue, (void*)&conn->login_mtask,
 		    sizeof(void*));
 	list_del(&conn->item);
diff --git a/include/scsi/libiscsi.h b/include/scsi/libiscsi.h
index 3f69f7e58f8..41904f611d1 100644
--- a/include/scsi/libiscsi.h
+++ b/include/scsi/libiscsi.h
@@ -135,6 +135,14 @@ struct iscsi_conn {
 	int			id;		/* CID */
 	struct list_head	item;		/* maintains list of conns */
 	int			c_stage;	/* connection state */
+	/*
+	 * Preallocated buffer for pdus that have data but do not
+	 * originate from scsi-ml. We never have two pdus using the
+	 * buffer at the same time. It is only allocated to
+	 * the default max recv size because the pdus we support
+	 * should always fit in this buffer
+	 */
+	char			*data;
 	struct iscsi_mgmt_task	*login_mtask;	/* mtask used for login/text */
 	struct iscsi_mgmt_task	*mtask;		/* xmit mtask in progress */
 	struct iscsi_cmd_task	*ctask;		/* xmit ctask in progress */
-- 
cgit v1.2.3-70-g09d2


From 40527afea1a3b18ee5754e17d6f807176e03f1f2 Mon Sep 17 00:00:00 2001
From: Mike Christie <michaelc@cs.wisc.edu>
Date: Mon, 24 Jul 2006 15:47:45 -0500
Subject: [SCSI] iscsi bugfixes: pass errors from complete_pdu to caller

Must pass ISCSI_ERR values from the recv path and propogate them
upwards.

Signed-off-by: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
---
 drivers/scsi/iscsi_tcp.c |  2 +-
 drivers/scsi/libiscsi.c  | 27 ++++++++++++++++++---------
 2 files changed, 19 insertions(+), 10 deletions(-)

(limited to 'drivers/scsi')

diff --git a/drivers/scsi/iscsi_tcp.c b/drivers/scsi/iscsi_tcp.c
index aa20adc79f0..33534f68643 100644
--- a/drivers/scsi/iscsi_tcp.c
+++ b/drivers/scsi/iscsi_tcp.c
@@ -885,7 +885,7 @@ more:
 			}
 			tcp_conn->in_progress = IN_PROGRESS_DATA_RECV;
 		} else if (rc) {
-			iscsi_conn_failure(conn, ISCSI_ERR_CONN_FAILED);
+			iscsi_conn_failure(conn, rc);
 			return 0;
 		}
 	}
diff --git a/drivers/scsi/libiscsi.c b/drivers/scsi/libiscsi.c
index 03b3dee4900..c628c63c51a 100644
--- a/drivers/scsi/libiscsi.c
+++ b/drivers/scsi/libiscsi.c
@@ -372,7 +372,8 @@ int __iscsi_complete_pdu(struct iscsi_conn *conn, struct iscsi_hdr *hdr,
 			 * login related PDU's exp_statsn is handled in
 			 * userspace
 			 */
-			rc = iscsi_recv_pdu(conn->cls_conn, hdr, data, datalen);
+			if (iscsi_recv_pdu(conn->cls_conn, hdr, data, datalen))
+				rc = ISCSI_ERR_CONN_FAILED;
 			list_del(&mtask->running);
 			if (conn->login_mtask != mtask)
 				__kfifo_put(session->mgmtpool.queue,
@@ -393,7 +394,8 @@ int __iscsi_complete_pdu(struct iscsi_conn *conn, struct iscsi_hdr *hdr,
 			}
 			conn->exp_statsn = be32_to_cpu(hdr->statsn) + 1;
 
-			rc = iscsi_recv_pdu(conn->cls_conn, hdr, data, datalen);
+			if (iscsi_recv_pdu(conn->cls_conn, hdr, data, datalen))
+				rc = ISCSI_ERR_CONN_FAILED;
 			list_del(&mtask->running);
 			if (conn->login_mtask != mtask)
 				__kfifo_put(session->mgmtpool.queue,
@@ -406,14 +408,21 @@ int __iscsi_complete_pdu(struct iscsi_conn *conn, struct iscsi_hdr *hdr,
 	} else if (itt == ISCSI_RESERVED_TAG) {
 		switch(opcode) {
 		case ISCSI_OP_NOOP_IN:
-			if (!datalen) {
-				rc = iscsi_check_assign_cmdsn(session,
-						 (struct iscsi_nopin*)hdr);
-				if (!rc && hdr->ttt != ISCSI_RESERVED_TAG)
-					rc = iscsi_recv_pdu(conn->cls_conn,
-							    hdr, NULL, 0);
-			} else
+			if (datalen) {
 				rc = ISCSI_ERR_PROTO;
+				break;
+			}
+
+			rc = iscsi_check_assign_cmdsn(session,
+						 (struct iscsi_nopin*)hdr);
+			if (rc)
+				break;
+
+			if (hdr->ttt == ISCSI_RESERVED_TAG)
+				break;
+
+			if (iscsi_recv_pdu(conn->cls_conn, hdr, NULL, 0))
+				rc = ISCSI_ERR_CONN_FAILED;
 			break;
 		case ISCSI_OP_REJECT:
 			/* we need sth like iscsi_reject_rsp()*/
-- 
cgit v1.2.3-70-g09d2


From f3ff0c3627df90aa28be98803b10289bb348e4e6 Mon Sep 17 00:00:00 2001
From: Mike Christie <michaelc@cs.wisc.edu>
Date: Mon, 24 Jul 2006 15:47:50 -0500
Subject: [SCSI] iscsi bugfixes: fix mem leaks in libiscsi

We were leaking some strings. This patch just frees them.

Signed-off-by: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
---
 drivers/scsi/libiscsi.c | 3 +++
 1 file changed, 3 insertions(+)

(limited to 'drivers/scsi')

diff --git a/drivers/scsi/libiscsi.c b/drivers/scsi/libiscsi.c
index c628c63c51a..5884cd26d53 100644
--- a/drivers/scsi/libiscsi.c
+++ b/drivers/scsi/libiscsi.c
@@ -1357,6 +1357,8 @@ void iscsi_session_teardown(struct iscsi_cls_session *cls_session)
 	iscsi_pool_free(&session->mgmtpool, (void**)session->mgmt_cmds);
 	iscsi_pool_free(&session->cmdpool, (void**)session->cmds);
 
+	kfree(session->targetname);
+
 	iscsi_destroy_session(cls_session);
 	scsi_host_put(shost);
 	module_put(owner);
@@ -1491,6 +1493,7 @@ void iscsi_conn_teardown(struct iscsi_cls_conn *cls_conn)
 
 	spin_lock_bh(&session->lock);
 	kfree(conn->data);
+	kfree(conn->persistent_address);
 	__kfifo_put(session->mgmtpool.queue, (void*)&conn->login_mtask,
 		    sizeof(void*));
 	list_del(&conn->item);
-- 
cgit v1.2.3-70-g09d2


From f4246b33c774bb4330eb6286beed6d3c9f4373c4 Mon Sep 17 00:00:00 2001
From: Mike Christie <michaelc@cs.wisc.edu>
Date: Mon, 24 Jul 2006 15:47:54 -0500
Subject: [SCSI] iscsi bugfixes: update and move version number

The version info is useful for iscsi tcp, iser and qla4xxx so move to
transport class.

Signed-off-by: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
---
 drivers/scsi/iscsi_tcp.c            | 6 +-----
 drivers/scsi/scsi_transport_iscsi.c | 5 +++++
 2 files changed, 6 insertions(+), 5 deletions(-)

(limited to 'drivers/scsi')

diff --git a/drivers/scsi/iscsi_tcp.c b/drivers/scsi/iscsi_tcp.c
index 33534f68643..058f094f945 100644
--- a/drivers/scsi/iscsi_tcp.c
+++ b/drivers/scsi/iscsi_tcp.c
@@ -43,13 +43,10 @@
 
 #include "iscsi_tcp.h"
 
-#define ISCSI_TCP_VERSION "1.0-595"
-
 MODULE_AUTHOR("Dmitry Yusupov <dmitry_yus@yahoo.com>, "
 	      "Alex Aizman <itn780@yahoo.com>");
 MODULE_DESCRIPTION("iSCSI/TCP data-path");
 MODULE_LICENSE("GPL");
-MODULE_VERSION(ISCSI_TCP_VERSION);
 /* #define DEBUG_TCP */
 #define DEBUG_ASSERT
 
@@ -2317,8 +2314,7 @@ static void iscsi_tcp_session_destroy(struct iscsi_cls_session *cls_session)
 }
 
 static struct scsi_host_template iscsi_sht = {
-	.name			= "iSCSI Initiator over TCP/IP, v"
-				  ISCSI_TCP_VERSION,
+	.name			= "iSCSI Initiator over TCP/IP",
 	.queuecommand           = iscsi_queuecommand,
 	.change_queue_depth	= iscsi_change_queue_depth,
 	.can_queue		= ISCSI_XMIT_CMDS_MAX - 1,
diff --git a/drivers/scsi/scsi_transport_iscsi.c b/drivers/scsi/scsi_transport_iscsi.c
index 30a47c13309..2ecd1418857 100644
--- a/drivers/scsi/scsi_transport_iscsi.c
+++ b/drivers/scsi/scsi_transport_iscsi.c
@@ -34,6 +34,7 @@
 #define ISCSI_SESSION_ATTRS 11
 #define ISCSI_CONN_ATTRS 11
 #define ISCSI_HOST_ATTRS 0
+#define ISCSI_TRANSPORT_VERSION "1.1-646"
 
 struct iscsi_internal {
 	int daemon_pid;
@@ -1613,6 +1614,9 @@ static __init int iscsi_transport_init(void)
 {
 	int err;
 
+	printk(KERN_INFO "Loading iSCSI transport class v%s.",
+		ISCSI_TRANSPORT_VERSION);
+
 	err = class_register(&iscsi_transport_class);
 	if (err)
 		return err;
@@ -1678,3 +1682,4 @@ MODULE_AUTHOR("Mike Christie <michaelc@cs.wisc.edu>, "
 	      "Alex Aizman <itn780@yahoo.com>");
 MODULE_DESCRIPTION("iSCSI Transport Interface");
 MODULE_LICENSE("GPL");
+MODULE_VERSION(ISCSI_TRANSPORT_VERSION);
-- 
cgit v1.2.3-70-g09d2


From fbf6080225a03aa2b3671acacebdf615f1d3f6ba Mon Sep 17 00:00:00 2001
From: "Ju, Seokmann" <Seokmann.Ju@lsil.com>
Date: Tue, 25 Jul 2006 08:44:48 -0600
Subject: [SCSI] megaraid_{mm,mbox}: 64-bit DMA capability checker

This patch contains
- a fix for 64-bit DMA capability check in megaraid_{mm,mbox} driver.
- includes changes (going back to 32-bit DMA mask if 64-bit DMA mask
failes) suggested by James with previous patch.
- addition of SATA 150-4/6 as commented by Vasily Averin.

With patch, the driver access PCIconfiguration space with dedicated
offset to read a signature. If the signature read, it means that the
controller has capability to handle 64-bit DMA.
Without this patch, the driver used to blindly claim 64-bit DMA
capability.
The issue has been reported by Vasily Averin [vvs@sw.ru].
Thank you Vasily for the reporting.

Signed-Off By: Seokmann Ju <seokmann.ju@lsil.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
---
 Documentation/scsi/ChangeLog.megaraid | 61 +++++++++++++++++++++++++++++++++++
 drivers/scsi/megaraid/mega_common.h   |  3 ++
 drivers/scsi/megaraid/megaraid_mbox.c | 34 +++++++++++++++----
 drivers/scsi/megaraid/megaraid_mbox.h |  4 +--
 4 files changed, 94 insertions(+), 8 deletions(-)

(limited to 'drivers/scsi')

diff --git a/Documentation/scsi/ChangeLog.megaraid b/Documentation/scsi/ChangeLog.megaraid
index c173806c91f..fd8939e0045 100644
--- a/Documentation/scsi/ChangeLog.megaraid
+++ b/Documentation/scsi/ChangeLog.megaraid
@@ -1,3 +1,64 @@
+Release Date	: Fri May 19 09:31:45 EST 2006 - Seokmann Ju <sju@lsil.com>
+Current Version : 2.20.4.9 (scsi module), 2.20.2.6 (cmm module)
+Older Version	: 2.20.4.8 (scsi module), 2.20.2.6 (cmm module)
+
+1.	Fixed a bug in megaraid_init_mbox().
+	Customer reported "garbage in file on x86_64 platform".
+	Root Cause: the driver registered controllers as 64-bit DMA capable
+	for those which are not support it.
+	Fix: Made change in the function inserting identification machanism
+	identifying 64-bit DMA capable controllers.
+
+	> -----Original Message-----
+	> From: Vasily Averin [mailto:vvs@sw.ru]
+	> Sent: Thursday, May 04, 2006 2:49 PM
+	> To: linux-scsi@vger.kernel.org; Kolli, Neela; Mukker, Atul;
+	> Ju, Seokmann; Bagalkote, Sreenivas;
+	> James.Bottomley@SteelEye.com; devel@openvz.org
+	> Subject: megaraid_mbox: garbage in file
+	>
+	> Hello all,
+	>
+	> I've investigated customers claim on the unstable work of
+	> their node and found a
+	> strange effect: reading from some files leads to the
+	>  "attempt to access beyond end of device" messages.
+	>
+	> I've checked filesystem, memory on the node, motherboard BIOS
+	> version, but it
+	> does not help and issue still has been reproduced by simple
+	> file reading.
+	>
+	> Reproducer is simple:
+	>
+	> echo 0xffffffff >/proc/sys/dev/scsi/logging_level ;
+	> cat /vz/private/101/root/etc/ld.so.cache >/tmp/ttt  ;
+	> echo 0 >/proc/sys/dev/scsi/logging
+	>
+	> It leads to the following messages in dmesg
+	>
+	> sd_init_command: disk=sda, block=871769260, count=26
+	> sda : block=871769260
+	> sda : reading 26/26 512 byte blocks.
+	> scsi_add_timer: scmd: f79ed980, time: 7500, (c02b1420)
+	> sd 0:1:0:0: send 0xf79ed980                  sd 0:1:0:0:
+	>         command: Read (10): 28 00 33 f6 24 ac 00 00 1a 00
+	> buffer = 0xf7cfb540, bufflen = 13312, done = 0xc0366b40,
+	> queuecommand 0xc0344010
+	> leaving scsi_dispatch_cmnd()
+	> scsi_delete_timer: scmd: f79ed980, rtn: 1
+	> sd 0:1:0:0: done 0xf79ed980 SUCCESS        0 sd 0:1:0:0:
+	>         command: Read (10): 28 00 33 f6 24 ac 00 00 1a 00
+	> scsi host busy 1 failed 0
+	> sd 0:1:0:0: Notifying upper driver of completion (result 0)
+	> sd_rw_intr: sda: res=0x0
+	> 26 sectors total, 13312 bytes done.
+	> use_sg is 4
+	> attempt to access beyond end of device
+	> sda6: rw=0, want=1044134458, limit=951401367
+	> Buffer I/O error on device sda6, logical block 522067228
+	> attempt to access beyond end of device
+
 Release Date	: Mon Apr 11 12:27:22 EST 2006 - Seokmann Ju <sju@lsil.com>
 Current Version : 2.20.4.8 (scsi module), 2.20.2.6 (cmm module)
 Older Version	: 2.20.4.7 (scsi module), 2.20.2.6 (cmm module)
diff --git a/drivers/scsi/megaraid/mega_common.h b/drivers/scsi/megaraid/mega_common.h
index 4675343228a..12e38125b12 100644
--- a/drivers/scsi/megaraid/mega_common.h
+++ b/drivers/scsi/megaraid/mega_common.h
@@ -37,6 +37,9 @@
 #define LSI_MAX_CHANNELS		16
 #define LSI_MAX_LOGICAL_DRIVES_64LD	(64+1)
 
+#define HBA_SIGNATURE_64_BIT		0x299
+#define PCI_CONF_AMISIG64		0xa4
+
 
 /**
  * scb_t - scsi command control block
diff --git a/drivers/scsi/megaraid/megaraid_mbox.c b/drivers/scsi/megaraid/megaraid_mbox.c
index 92715130ac0..e671af0b4f5 100644
--- a/drivers/scsi/megaraid/megaraid_mbox.c
+++ b/drivers/scsi/megaraid/megaraid_mbox.c
@@ -10,7 +10,7 @@
  *	   2 of the License, or (at your option) any later version.
  *
  * FILE		: megaraid_mbox.c
- * Version	: v2.20.4.8 (Apr 11 2006)
+ * Version	: v2.20.4.9 (Jul 16 2006)
  *
  * Authors:
  * 	Atul Mukker		<Atul.Mukker@lsil.com>
@@ -720,6 +720,7 @@ megaraid_init_mbox(adapter_t *adapter)
 	struct pci_dev		*pdev;
 	mraid_device_t		*raid_dev;
 	int			i;
+	uint32_t		magic64;
 
 
 	adapter->ito	= MBOX_TIMEOUT;
@@ -863,12 +864,33 @@ megaraid_init_mbox(adapter_t *adapter)
 
 	// Set the DMA mask to 64-bit. All supported controllers as capable of
 	// DMA in this range
-	if (pci_set_dma_mask(adapter->pdev, DMA_64BIT_MASK) != 0) {
-
-		con_log(CL_ANN, (KERN_WARNING
-			"megaraid: could not set DMA mask for 64-bit.\n"));
+	pci_read_config_dword(adapter->pdev, PCI_CONF_AMISIG64, &magic64);
+
+	if (((magic64 == HBA_SIGNATURE_64_BIT) &&
+		((adapter->pdev->subsystem_device !=
+		PCI_SUBSYS_ID_MEGARAID_SATA_150_6) ||
+		(adapter->pdev->subsystem_device !=
+		PCI_SUBSYS_ID_MEGARAID_SATA_150_4))) ||
+		(adapter->pdev->vendor == PCI_VENDOR_ID_LSI_LOGIC &&
+		adapter->pdev->device == PCI_DEVICE_ID_VERDE) ||
+		(adapter->pdev->vendor == PCI_VENDOR_ID_LSI_LOGIC &&
+		adapter->pdev->device == PCI_DEVICE_ID_DOBSON) ||
+		(adapter->pdev->vendor == PCI_VENDOR_ID_LSI_LOGIC &&
+		adapter->pdev->device == PCI_DEVICE_ID_LINDSAY) ||
+		(adapter->pdev->vendor == PCI_VENDOR_ID_DELL &&
+		adapter->pdev->device == PCI_DEVICE_ID_PERC4_DI_EVERGLADES) ||
+		(adapter->pdev->vendor == PCI_VENDOR_ID_DELL &&
+		adapter->pdev->device == PCI_DEVICE_ID_PERC4E_DI_KOBUK)) {
+		if (pci_set_dma_mask(adapter->pdev, DMA_64BIT_MASK)) {
+			con_log(CL_ANN, (KERN_WARNING
+				"megaraid: DMA mask for 64-bit failed\n"));
 
-		goto out_free_sysfs_res;
+			if (pci_set_dma_mask (adapter->pdev, DMA_32BIT_MASK)) {
+				con_log(CL_ANN, (KERN_WARNING
+					"megaraid: 32-bit DMA mask failed\n"));
+				goto out_free_sysfs_res;
+			}
+		}
 	}
 
 	// setup tasklet for DPC
diff --git a/drivers/scsi/megaraid/megaraid_mbox.h b/drivers/scsi/megaraid/megaraid_mbox.h
index 868fb0ec93e..2b5a3285f79 100644
--- a/drivers/scsi/megaraid/megaraid_mbox.h
+++ b/drivers/scsi/megaraid/megaraid_mbox.h
@@ -21,8 +21,8 @@
 #include "megaraid_ioctl.h"
 
 
-#define MEGARAID_VERSION	"2.20.4.8"
-#define MEGARAID_EXT_VERSION	"(Release Date: Mon Apr 11 12:27:22 EST 2006)"
+#define MEGARAID_VERSION	"2.20.4.9"
+#define MEGARAID_EXT_VERSION	"(Release Date: Sun Jul 16 12:27:22 EST 2006)"
 
 
 /*
-- 
cgit v1.2.3-70-g09d2


From aa677bc7445147f663ebde69d248a30839bada76 Mon Sep 17 00:00:00 2001
From: "Ju, Seokmann" <Seokmann.Ju@lsil.com>
Date: Tue, 25 Jul 2006 08:44:58 -0600
Subject: [SCSI] megaraid_{mm,mbox}: a fix on INQUIRY with EVPD

With this patch, driver will protect data corruption created by
INQUIRY with EVPD request to megaraid controllers.  As specified in
the changelog, megaraid F/W already has fixed the issue and being
under process of release. Meanwhile, driver will protect the system
with this patch.

Signed-Off By: Seokmann Ju <seokmann.ju@lsil.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
---
 Documentation/scsi/ChangeLog.megaraid | 7 +++++++
 drivers/scsi/megaraid/mega_common.h   | 3 +++
 drivers/scsi/megaraid/megaraid_mbox.c | 8 ++++++++
 3 files changed, 18 insertions(+)

(limited to 'drivers/scsi')

diff --git a/Documentation/scsi/ChangeLog.megaraid b/Documentation/scsi/ChangeLog.megaraid
index fd8939e0045..0edb048b2ea 100644
--- a/Documentation/scsi/ChangeLog.megaraid
+++ b/Documentation/scsi/ChangeLog.megaraid
@@ -59,6 +59,13 @@ Older Version	: 2.20.4.8 (scsi module), 2.20.2.6 (cmm module)
 	> Buffer I/O error on device sda6, logical block 522067228
 	> attempt to access beyond end of device
 
+2.	When INQUIRY with EVPD bit set issued to the MegaRAID controller,
+	system memory gets corrupted.
+	Root Cause: MegaRAID F/W handle the INQUIRY with EVPD bit set
+	incorrectly.
+	Fix: MegaRAID F/W has fixed the problem and being process of release,
+	soon. Meanwhile, driver will filter out the request.
+
 Release Date	: Mon Apr 11 12:27:22 EST 2006 - Seokmann Ju <sju@lsil.com>
 Current Version : 2.20.4.8 (scsi module), 2.20.2.6 (cmm module)
 Older Version	: 2.20.4.7 (scsi module), 2.20.2.6 (cmm module)
diff --git a/drivers/scsi/megaraid/mega_common.h b/drivers/scsi/megaraid/mega_common.h
index 12e38125b12..8cd0bd1d0f7 100644
--- a/drivers/scsi/megaraid/mega_common.h
+++ b/drivers/scsi/megaraid/mega_common.h
@@ -40,6 +40,9 @@
 #define HBA_SIGNATURE_64_BIT		0x299
 #define PCI_CONF_AMISIG64		0xa4
 
+#define MEGA_SCSI_INQ_EVPD		1
+#define MEGA_INVALID_FIELD_IN_CDB	0x24
+
 
 /**
  * scb_t - scsi command control block
diff --git a/drivers/scsi/megaraid/megaraid_mbox.c b/drivers/scsi/megaraid/megaraid_mbox.c
index e671af0b4f5..cd982c877da 100644
--- a/drivers/scsi/megaraid/megaraid_mbox.c
+++ b/drivers/scsi/megaraid/megaraid_mbox.c
@@ -1644,6 +1644,14 @@ megaraid_mbox_build_cmd(adapter_t *adapter, struct scsi_cmnd *scp, int *busy)
 				rdev->last_disp |= (1L << SCP2CHANNEL(scp));
 			}
 
+			if (scp->cmnd[1] & MEGA_SCSI_INQ_EVPD) {
+				scp->sense_buffer[0] = 0x70;
+				scp->sense_buffer[2] = ILLEGAL_REQUEST;
+				scp->sense_buffer[12] = MEGA_INVALID_FIELD_IN_CDB;
+				scp->result = CHECK_CONDITION << 1;
+				return NULL;
+			}
+
 			/* Fall through */
 
 		case READ_CAPACITY:
-- 
cgit v1.2.3-70-g09d2


From 0b4972d59170e13ab0236e8a7148112052590c01 Mon Sep 17 00:00:00 2001
From: "Ju, Seokmann" <Seokmann.Ju@lsil.com>
Date: Tue, 25 Jul 2006 08:45:06 -0600
Subject: [SCSI] megaraid_{mm,mbox}: a fix on "kernel unaligned access address"
 issue

There was an issue in the data structure defined by megaraid driver
casuing "kernel unaligned access.." messages to be displayed during
IOCTL on IA64 platform.

The issue has been reported/fixed by Sakurai Hiroomi
[sakurai_hiro@soft.fujitsu.com].

Signed-Off By: Seokmann Ju <seokmann.ju@lsil.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
---
 Documentation/scsi/ChangeLog.megaraid  | 55 ++++++++++++++++++++++++++++++++++
 drivers/scsi/megaraid/megaraid_ioctl.h |  4 +++
 drivers/scsi/megaraid/megaraid_mm.c    |  2 +-
 drivers/scsi/megaraid/megaraid_mm.h    |  4 +--
 4 files changed, 62 insertions(+), 3 deletions(-)

(limited to 'drivers/scsi')

diff --git a/Documentation/scsi/ChangeLog.megaraid b/Documentation/scsi/ChangeLog.megaraid
index 0edb048b2ea..a056bbe67c7 100644
--- a/Documentation/scsi/ChangeLog.megaraid
+++ b/Documentation/scsi/ChangeLog.megaraid
@@ -66,6 +66,61 @@ Older Version	: 2.20.4.8 (scsi module), 2.20.2.6 (cmm module)
 	Fix: MegaRAID F/W has fixed the problem and being process of release,
 	soon. Meanwhile, driver will filter out the request.
 
+3.	One of member in the data structure of the driver leads unaligne
+	issue on 64-bit platform.
+	Customer reporeted "kernel unaligned access addrss" issue when
+	application communicates with MegaRAID HBA driver.
+	Root Cause: in uioc_t structure, one of member had misaligned and it
+	led system to display the error message.
+	Fix: A patch submitted to community from following folk.
+
+	> -----Original Message-----
+	> From: linux-scsi-owner@vger.kernel.org
+	> [mailto:linux-scsi-owner@vger.kernel.org] On Behalf Of Sakurai Hiroomi
+	> Sent: Wednesday, July 12, 2006 4:20 AM
+	> To: linux-scsi@vger.kernel.org; linux-kernel@vger.kernel.org
+	> Subject: Re: Help: strange messages from kernel on IA64 platform
+	>
+	> Hi,
+	>
+	> I saw same message.
+	>
+	> When GAM(Global Array Manager) is started, The following
+	> message output.
+	> kernel: kernel unaligned access to 0xe0000001fe1080d4,
+	> ip=0xa000000200053371
+	>
+	> The uioc structure used by ioctl is defined by packed,
+	> the allignment of each member are disturbed.
+	> In a 64 bit structure, the allignment of member doesn't fit 64 bit
+	> boundary. this causes this messages.
+	> In a 32 bit structure, we don't see the message because the allinment
+	> of member fit 32 bit boundary even if packed is specified.
+	>
+	> patch
+	> I Add 32 bit dummy member to fit 64 bit boundary. I tested.
+	> We confirmed this patch fix the problem by IA64 server.
+	>
+	> **************************************************************
+	> ****************
+	> --- linux-2.6.9/drivers/scsi/megaraid/megaraid_ioctl.h.orig
+	> 2006-04-03 17:13:03.000000000 +0900
+	> +++ linux-2.6.9/drivers/scsi/megaraid/megaraid_ioctl.h
+	> 2006-04-03 17:14:09.000000000 +0900
+	> @@ -132,6 +132,10 @@
+	>  /* Driver Data: */
+	>          void __user *           user_data;
+	>          uint32_t                user_data_len;
+	> +
+	> +        /* 64bit alignment */
+	> +        uint32_t                pad_0xBC;
+	> +
+	>          mraid_passthru_t        __user *user_pthru;
+	>
+	>          mraid_passthru_t        *pthru32;
+	> **************************************************************
+	> ****************
+
 Release Date	: Mon Apr 11 12:27:22 EST 2006 - Seokmann Ju <sju@lsil.com>
 Current Version : 2.20.4.8 (scsi module), 2.20.2.6 (cmm module)
 Older Version	: 2.20.4.7 (scsi module), 2.20.2.6 (cmm module)
diff --git a/drivers/scsi/megaraid/megaraid_ioctl.h b/drivers/scsi/megaraid/megaraid_ioctl.h
index bdaee144a1c..b8aa34202ec 100644
--- a/drivers/scsi/megaraid/megaraid_ioctl.h
+++ b/drivers/scsi/megaraid/megaraid_ioctl.h
@@ -132,6 +132,10 @@ typedef struct uioc {
 /* Driver Data: */
 	void __user *		user_data;
 	uint32_t		user_data_len;
+
+	/* 64bit alignment */
+	uint32_t                pad_for_64bit_align;
+
 	mraid_passthru_t	__user *user_pthru;
 
 	mraid_passthru_t	*pthru32;
diff --git a/drivers/scsi/megaraid/megaraid_mm.c b/drivers/scsi/megaraid/megaraid_mm.c
index e8f534fb336..d85b9a8f1b8 100644
--- a/drivers/scsi/megaraid/megaraid_mm.c
+++ b/drivers/scsi/megaraid/megaraid_mm.c
@@ -10,7 +10,7 @@
  *	   2 of the License, or (at your option) any later version.
  *
  * FILE		: megaraid_mm.c
- * Version	: v2.20.2.6 (Mar 7 2005)
+ * Version	: v2.20.2.7 (Jul 16 2006)
  *
  * Common management module
  */
diff --git a/drivers/scsi/megaraid/megaraid_mm.h b/drivers/scsi/megaraid/megaraid_mm.h
index 3d9e67d6849..c8762b2b8ed 100644
--- a/drivers/scsi/megaraid/megaraid_mm.h
+++ b/drivers/scsi/megaraid/megaraid_mm.h
@@ -27,9 +27,9 @@
 #include "megaraid_ioctl.h"
 
 
-#define LSI_COMMON_MOD_VERSION	"2.20.2.6"
+#define LSI_COMMON_MOD_VERSION	"2.20.2.7"
 #define LSI_COMMON_MOD_EXT_VERSION	\
-		"(Release Date: Mon Mar 7 00:01:03 EST 2005)"
+		"(Release Date: Sun Jul 16 00:01:03 EST 2006)"
 
 
 #define LSI_DBGLVL			dbglevel
-- 
cgit v1.2.3-70-g09d2


From 64ba88182962698a8cb75792372c1dddaef82989 Mon Sep 17 00:00:00 2001
From: James Smart <James.Smart@Emulex.Com>
Date: Wed, 2 Aug 2006 15:24:34 -0400
Subject: [SCSI] lpfc 8.1.7 : Add statistics reset callback for FC transport

Signed-off-by: James Smart <James.Smart@emulex.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
---
 drivers/scsi/lpfc/lpfc_attr.c | 90 +++++++++++++++++++++++++++++++++++++++++--
 drivers/scsi/lpfc/lpfc_sli.c  |  3 ++
 drivers/scsi/lpfc/lpfc_sli.h  | 14 +++++++
 3 files changed, 103 insertions(+), 4 deletions(-)

(limited to 'drivers/scsi')

diff --git a/drivers/scsi/lpfc/lpfc_attr.c b/drivers/scsi/lpfc/lpfc_attr.c
index 5c68cdd8736..762d623018f 100644
--- a/drivers/scsi/lpfc/lpfc_attr.c
+++ b/drivers/scsi/lpfc/lpfc_attr.c
@@ -1210,8 +1210,10 @@ lpfc_get_stats(struct Scsi_Host *shost)
 	struct lpfc_hba *phba = (struct lpfc_hba *)shost->hostdata;
 	struct lpfc_sli *psli = &phba->sli;
 	struct fc_host_statistics *hs = &phba->link_stats;
+	struct lpfc_lnk_stat * lso = &psli->lnk_stat_offsets;
 	LPFC_MBOXQ_t *pmboxq;
 	MAILBOX_t *pmb;
+	unsigned long seconds;
 	int rc = 0;
 
 	pmboxq = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
@@ -1272,22 +1274,103 @@ lpfc_get_stats(struct Scsi_Host *shost)
 	hs->invalid_crc_count = pmb->un.varRdLnk.crcCnt;
 	hs->error_frames = pmb->un.varRdLnk.crcCnt;
 
+	hs->link_failure_count -= lso->link_failure_count;
+	hs->loss_of_sync_count -= lso->loss_of_sync_count;
+	hs->loss_of_signal_count -= lso->loss_of_signal_count;
+	hs->prim_seq_protocol_err_count -= lso->prim_seq_protocol_err_count;
+	hs->invalid_tx_word_count -= lso->invalid_tx_word_count;
+	hs->invalid_crc_count -= lso->invalid_crc_count;
+	hs->error_frames -= lso->error_frames;
+
 	if (phba->fc_topology == TOPOLOGY_LOOP) {
 		hs->lip_count = (phba->fc_eventTag >> 1);
+		hs->lip_count -= lso->link_events;
 		hs->nos_count = -1;
 	} else {
 		hs->lip_count = -1;
 		hs->nos_count = (phba->fc_eventTag >> 1);
+		hs->nos_count -= lso->link_events;
 	}
 
 	hs->dumped_frames = -1;
 
-/* FIX ME */
-	/*hs->SecondsSinceLastReset = (jiffies - lpfc_loadtime) / HZ;*/
+	seconds = get_seconds();
+	if (seconds < psli->stats_start)
+		hs->seconds_since_last_reset = seconds +
+				((unsigned long)-1 - psli->stats_start);
+	else
+		hs->seconds_since_last_reset = seconds - psli->stats_start;
 
 	return hs;
 }
 
+static void
+lpfc_reset_stats(struct Scsi_Host *shost)
+{
+	struct lpfc_hba *phba = (struct lpfc_hba *)shost->hostdata;
+	struct lpfc_sli *psli = &phba->sli;
+	struct lpfc_lnk_stat * lso = &psli->lnk_stat_offsets;
+	LPFC_MBOXQ_t *pmboxq;
+	MAILBOX_t *pmb;
+	int rc = 0;
+
+	pmboxq = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
+	if (!pmboxq)
+		return;
+	memset(pmboxq, 0, sizeof(LPFC_MBOXQ_t));
+
+	pmb = &pmboxq->mb;
+	pmb->mbxCommand = MBX_READ_STATUS;
+	pmb->mbxOwner = OWN_HOST;
+	pmb->un.varWords[0] = 0x1; /* reset request */
+	pmboxq->context1 = NULL;
+
+	if ((phba->fc_flag & FC_OFFLINE_MODE) ||
+		(!(psli->sli_flag & LPFC_SLI2_ACTIVE)))
+		rc = lpfc_sli_issue_mbox(phba, pmboxq, MBX_POLL);
+	else
+		rc = lpfc_sli_issue_mbox_wait(phba, pmboxq, phba->fc_ratov * 2);
+
+	if (rc != MBX_SUCCESS) {
+		if (rc == MBX_TIMEOUT)
+			pmboxq->mbox_cmpl = lpfc_sli_def_mbox_cmpl;
+		else
+			mempool_free(pmboxq, phba->mbox_mem_pool);
+		return;
+	}
+
+	memset(pmboxq, 0, sizeof(LPFC_MBOXQ_t));
+	pmb->mbxCommand = MBX_READ_LNK_STAT;
+	pmb->mbxOwner = OWN_HOST;
+	pmboxq->context1 = NULL;
+
+	if ((phba->fc_flag & FC_OFFLINE_MODE) ||
+	    (!(psli->sli_flag & LPFC_SLI2_ACTIVE)))
+		rc = lpfc_sli_issue_mbox(phba, pmboxq, MBX_POLL);
+	else
+		rc = lpfc_sli_issue_mbox_wait(phba, pmboxq, phba->fc_ratov * 2);
+
+	if (rc != MBX_SUCCESS) {
+		if (rc == MBX_TIMEOUT)
+			pmboxq->mbox_cmpl = lpfc_sli_def_mbox_cmpl;
+		else
+			mempool_free( pmboxq, phba->mbox_mem_pool);
+		return;
+	}
+
+	lso->link_failure_count = pmb->un.varRdLnk.linkFailureCnt;
+	lso->loss_of_sync_count = pmb->un.varRdLnk.lossSyncCnt;
+	lso->loss_of_signal_count = pmb->un.varRdLnk.lossSignalCnt;
+	lso->prim_seq_protocol_err_count = pmb->un.varRdLnk.primSeqErrCnt;
+	lso->invalid_tx_word_count = pmb->un.varRdLnk.invalidXmitWord;
+	lso->invalid_crc_count = pmb->un.varRdLnk.crcCnt;
+	lso->error_frames = pmb->un.varRdLnk.crcCnt;
+	lso->link_events = (phba->fc_eventTag >> 1);
+
+	psli->stats_start = get_seconds();
+
+	return;
+}
 
 /*
  * The LPFC driver treats linkdown handling as target loss events so there
@@ -1431,8 +1514,7 @@ struct fc_function_template lpfc_transport_functions = {
 	 */
 
 	.get_fc_host_stats = lpfc_get_stats,
-
-	/* the LPFC driver doesn't support resetting stats yet */
+	.reset_fc_host_stats = lpfc_reset_stats,
 
 	.dd_fcrport_size = sizeof(struct lpfc_rport_data),
 	.show_rport_maxframe_size = 1,
diff --git a/drivers/scsi/lpfc/lpfc_sli.c b/drivers/scsi/lpfc/lpfc_sli.c
index 350a625fa22..f453fccd67c 100644
--- a/drivers/scsi/lpfc/lpfc_sli.c
+++ b/drivers/scsi/lpfc/lpfc_sli.c
@@ -1792,6 +1792,9 @@ lpfc_sli_brdrestart(struct lpfc_hba * phba)
 
 	spin_unlock_irq(phba->host->host_lock);
 
+	memset(&psli->lnk_stat_offsets, 0, sizeof(psli->lnk_stat_offsets));
+	psli->stats_start = get_seconds();
+
 	if (skip_post)
 		mdelay(100);
 	else
diff --git a/drivers/scsi/lpfc/lpfc_sli.h b/drivers/scsi/lpfc/lpfc_sli.h
index d8ef0d2894d..478e799c2bb 100644
--- a/drivers/scsi/lpfc/lpfc_sli.h
+++ b/drivers/scsi/lpfc/lpfc_sli.h
@@ -172,6 +172,18 @@ struct lpfc_sli_stat {
 	uint32_t mbox_busy;	 /* Mailbox cmd busy */
 };
 
+/* Structure to store link status values when port stats are reset */
+struct lpfc_lnk_stat {
+	uint32_t link_failure_count;
+	uint32_t loss_of_sync_count;
+	uint32_t loss_of_signal_count;
+	uint32_t prim_seq_protocol_err_count;
+	uint32_t invalid_tx_word_count;
+	uint32_t invalid_crc_count;
+	uint32_t error_frames;
+	uint32_t link_events;
+};
+
 /* Structure used to hold SLI information */
 struct lpfc_sli {
 	uint32_t num_rings;
@@ -201,6 +213,8 @@ struct lpfc_sli {
 	struct lpfc_iocbq ** iocbq_lookup; /* array to lookup IOCB by IOTAG */
 	size_t iocbq_lookup_len;           /* current lengs of the array */
 	uint16_t  last_iotag;              /* last allocated IOTAG */
+	unsigned long  stats_start;        /* in seconds */
+	struct lpfc_lnk_stat lnk_stat_offsets;
 };
 
 /* Given a pointer to the start of the ring, and the slot number of
-- 
cgit v1.2.3-70-g09d2


From a309a6b6e64b8147b7cfe7388237fb83834f58c9 Mon Sep 17 00:00:00 2001
From: James Smart <James.Smart@Emulex.Com>
Date: Tue, 1 Aug 2006 07:33:43 -0400
Subject: [SCSI] lpfc 8.1.7 : Fix failing firmware download due to mailbox
 delays needing to be longer

Fix failing firmware download due to mailbox delays needing to be longer.

Signed-off-by: James Smart <James.Smart@emulex.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
---
 drivers/scsi/lpfc/lpfc_attr.c |  3 ++-
 drivers/scsi/lpfc/lpfc_crtn.h |  1 +
 drivers/scsi/lpfc/lpfc_mbox.c | 16 ++++++++++++++++
 drivers/scsi/lpfc/lpfc_sli.c  | 11 +++++++----
 drivers/scsi/lpfc/lpfc_sli.h  |  6 ++++++
 5 files changed, 32 insertions(+), 5 deletions(-)

(limited to 'drivers/scsi')

diff --git a/drivers/scsi/lpfc/lpfc_attr.c b/drivers/scsi/lpfc/lpfc_attr.c
index 762d623018f..4ccce1474f2 100644
--- a/drivers/scsi/lpfc/lpfc_attr.c
+++ b/drivers/scsi/lpfc/lpfc_attr.c
@@ -1000,7 +1000,8 @@ sysfs_mbox_read(struct kobject *kobj, char *buf, loff_t off, size_t count)
 			spin_unlock_irq(phba->host->host_lock);
 			rc = lpfc_sli_issue_mbox_wait (phba,
 						       phba->sysfs_mbox.mbox,
-						       phba->fc_ratov * 2);
+				lpfc_mbox_tmo_val(phba,
+				    phba->sysfs_mbox.mbox->mb.mbxCommand) * HZ);
 			spin_lock_irq(phba->host->host_lock);
 		}
 
diff --git a/drivers/scsi/lpfc/lpfc_crtn.h b/drivers/scsi/lpfc/lpfc_crtn.h
index 517e9e4dd46..2a176467f71 100644
--- a/drivers/scsi/lpfc/lpfc_crtn.h
+++ b/drivers/scsi/lpfc/lpfc_crtn.h
@@ -127,6 +127,7 @@ void lpfc_config_port(struct lpfc_hba *, LPFC_MBOXQ_t *);
 void lpfc_kill_board(struct lpfc_hba *, LPFC_MBOXQ_t *);
 void lpfc_mbox_put(struct lpfc_hba *, LPFC_MBOXQ_t *);
 LPFC_MBOXQ_t *lpfc_mbox_get(struct lpfc_hba *);
+int lpfc_mbox_tmo_val(struct lpfc_hba *, int);
 
 int lpfc_mem_alloc(struct lpfc_hba *);
 void lpfc_mem_free(struct lpfc_hba *);
diff --git a/drivers/scsi/lpfc/lpfc_mbox.c b/drivers/scsi/lpfc/lpfc_mbox.c
index e42f22aaf71..4d016c2a1b2 100644
--- a/drivers/scsi/lpfc/lpfc_mbox.c
+++ b/drivers/scsi/lpfc/lpfc_mbox.c
@@ -651,3 +651,19 @@ lpfc_mbox_get(struct lpfc_hba * phba)
 
 	return mbq;
 }
+
+int
+lpfc_mbox_tmo_val(struct lpfc_hba *phba, int cmd)
+{
+	switch (cmd) {
+	case MBX_WRITE_NV:	/* 0x03 */
+	case MBX_UPDATE_CFG:	/* 0x1B */
+	case MBX_DOWN_LOAD:	/* 0x1C */
+	case MBX_DEL_LD_ENTRY:	/* 0x1D */
+	case MBX_LOAD_AREA:	/* 0x81 */
+	case MBX_FLASH_WR_ULA:  /* 0x98 */
+	case MBX_LOAD_EXP_ROM:	/* 0x9C */
+		return LPFC_MBOX_TMO_FLASH_CMD;
+	}
+	return LPFC_MBOX_TMO;
+}
diff --git a/drivers/scsi/lpfc/lpfc_sli.c b/drivers/scsi/lpfc/lpfc_sli.c
index f453fccd67c..4dc2d584319 100644
--- a/drivers/scsi/lpfc/lpfc_sli.c
+++ b/drivers/scsi/lpfc/lpfc_sli.c
@@ -2197,7 +2197,8 @@ lpfc_sli_issue_mbox(struct lpfc_hba * phba, LPFC_MBOXQ_t * pmbox, uint32_t flag)
 			return (MBX_NOT_FINISHED);
 		}
 		/* timeout active mbox command */
-		mod_timer(&psli->mbox_tmo, jiffies + HZ * LPFC_MBOX_TMO);
+		mod_timer(&psli->mbox_tmo, (jiffies +
+			       (HZ * lpfc_mbox_tmo_val(phba, mb->mbxCommand))));
 	}
 
 	/* Mailbox cmd <cmd> issue */
@@ -2257,7 +2258,6 @@ lpfc_sli_issue_mbox(struct lpfc_hba * phba, LPFC_MBOXQ_t * pmbox, uint32_t flag)
 		break;
 
 	case MBX_POLL:
-		i = 0;
 		psli->mbox_active = NULL;
 		if (psli->sli_flag & LPFC_SLI2_ACTIVE) {
 			/* First read mbox status word */
@@ -2271,11 +2271,14 @@ lpfc_sli_issue_mbox(struct lpfc_hba * phba, LPFC_MBOXQ_t * pmbox, uint32_t flag)
 		/* Read the HBA Host Attention Register */
 		ha_copy = readl(phba->HAregaddr);
 
+		i = lpfc_mbox_tmo_val(phba, mb->mbxCommand);
+		i *= 1000; /* Convert to ms */
+
 		/* Wait for command to complete */
 		while (((word0 & OWN_CHIP) == OWN_CHIP) ||
 		       (!(ha_copy & HA_MBATT) &&
 			(phba->hba_state > LPFC_WARM_START))) {
-			if (i++ >= 100) {
+			if (i-- <= 0) {
 				psli->sli_flag &= ~LPFC_SLI_MBOX_ACTIVE;
 				spin_unlock_irqrestore(phba->host->host_lock,
 						       drvr_flag);
@@ -2293,7 +2296,7 @@ lpfc_sli_issue_mbox(struct lpfc_hba * phba, LPFC_MBOXQ_t * pmbox, uint32_t flag)
 
 			/* Can be in interrupt context, do not sleep */
 			/* (or might be called with interrupts disabled) */
-			mdelay(i);
+			mdelay(1);
 
 			spin_lock_irqsave(phba->host->host_lock, drvr_flag);
 
diff --git a/drivers/scsi/lpfc/lpfc_sli.h b/drivers/scsi/lpfc/lpfc_sli.h
index 478e799c2bb..e26de680935 100644
--- a/drivers/scsi/lpfc/lpfc_sli.h
+++ b/drivers/scsi/lpfc/lpfc_sli.h
@@ -225,3 +225,9 @@ struct lpfc_sli {
 
 #define LPFC_MBOX_TMO           30	/* Sec tmo for outstanding mbox
 					   command */
+#define LPFC_MBOX_TMO_FLASH_CMD 300     /* Sec tmo for outstanding FLASH write
+					 * or erase cmds. This is especially
+					 * long because of the potential of
+					 * multiple flash erases that can be
+					 * spawned.
+					 */
-- 
cgit v1.2.3-70-g09d2


From 1c067a42413c4f39c907443b8f5979cd4d82f0ff Mon Sep 17 00:00:00 2001
From: James Smart <James.Smart@Emulex.Com>
Date: Tue, 1 Aug 2006 07:33:52 -0400
Subject: [SCSI] lpfc 8.1.7 : Fix race condition between lpfc_sli_issue_mbox
 and lpfc_online

Fix race condition between lpfc_sli_issue_mbox and lpfc_online

Signed-off-by: James Smart <James.Smart@emulex.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
---
 drivers/scsi/lpfc/lpfc_sli.c | 10 +++++++---
 1 file changed, 7 insertions(+), 3 deletions(-)

(limited to 'drivers/scsi')

diff --git a/drivers/scsi/lpfc/lpfc_sli.c b/drivers/scsi/lpfc/lpfc_sli.c
index 4dc2d584319..fbf108c9625 100644
--- a/drivers/scsi/lpfc/lpfc_sli.c
+++ b/drivers/scsi/lpfc/lpfc_sli.c
@@ -1711,15 +1711,13 @@ lpfc_sli_brdreset(struct lpfc_hba * phba)
 	phba->fc_myDID = 0;
 	phba->fc_prevDID = 0;
 
-	psli->sli_flag = 0;
-
 	/* Turn off parity checking and serr during the physical reset */
 	pci_read_config_word(phba->pcidev, PCI_COMMAND, &cfg_value);
 	pci_write_config_word(phba->pcidev, PCI_COMMAND,
 			      (cfg_value &
 			       ~(PCI_COMMAND_PARITY | PCI_COMMAND_SERR)));
 
-	psli->sli_flag &= ~LPFC_SLI2_ACTIVE;
+	psli->sli_flag &= ~(LPFC_SLI2_ACTIVE | LPFC_PROCESS_LA);
 	/* Now toggle INITFF bit in the Host Control Register */
 	writel(HC_INITFF, phba->HCregaddr);
 	mdelay(1);
@@ -1905,6 +1903,9 @@ lpfc_sli_hba_setup(struct lpfc_hba * phba)
 	}
 
 	while (resetcount < 2 && !done) {
+		spin_lock_irq(phba->host->host_lock);
+		phba->sli.sli_flag |= LPFC_SLI_MBOX_ACTIVE;
+		spin_unlock_irq(phba->host->host_lock);
 		phba->hba_state = LPFC_STATE_UNKNOWN;
 		lpfc_sli_brdrestart(phba);
 		msleep(2500);
@@ -1912,6 +1913,9 @@ lpfc_sli_hba_setup(struct lpfc_hba * phba)
 		if (rc)
 			break;
 
+		spin_lock_irq(phba->host->host_lock);
+		phba->sli.sli_flag &= ~LPFC_SLI_MBOX_ACTIVE;
+		spin_unlock_irq(phba->host->host_lock);
 		resetcount++;
 
 	/* Call pre CONFIG_PORT mailbox command initialization.  A value of 0
-- 
cgit v1.2.3-70-g09d2


From 8f6d98d2e05c38cb08fbda5e38e5f87d361c3cac Mon Sep 17 00:00:00 2001
From: James Smart <James.Smart@Emulex.Com>
Date: Tue, 1 Aug 2006 07:34:00 -0400
Subject: [SCSI] lpfc 8.1.7 : Short bug fixes

Short bug fixes:
 - Fix iocbq list corruption due to missing list_del's in ct handling
 - Missing unlock in lpfc_sli_next_iotag()
 - Fix initialization of can_queue value
 - Differentiate sysfs mailbox errors with different codes.

Signed-off-by: James Smart <James.Smart@emulex.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
---
 drivers/scsi/lpfc/lpfc_attr.c |  6 +++---
 drivers/scsi/lpfc/lpfc_ct.c   |  1 +
 drivers/scsi/lpfc/lpfc_init.c | 12 +++++++++++-
 drivers/scsi/lpfc/lpfc_sli.c  |  5 +++--
 4 files changed, 18 insertions(+), 6 deletions(-)

(limited to 'drivers/scsi')

diff --git a/drivers/scsi/lpfc/lpfc_attr.c b/drivers/scsi/lpfc/lpfc_attr.c
index 4ccce1474f2..76f8bd53e23 100644
--- a/drivers/scsi/lpfc/lpfc_attr.c
+++ b/drivers/scsi/lpfc/lpfc_attr.c
@@ -884,7 +884,7 @@ sysfs_mbox_write(struct kobject *kobj, char *buf, loff_t off, size_t count)
 		    phba->sysfs_mbox.mbox   == NULL ) {
 			sysfs_mbox_idle(phba);
 			spin_unlock_irq(host->host_lock);
-			return -EINVAL;
+			return -EAGAIN;
 		}
 	}
 
@@ -1008,7 +1008,7 @@ sysfs_mbox_read(struct kobject *kobj, char *buf, loff_t off, size_t count)
 		if (rc != MBX_SUCCESS) {
 			sysfs_mbox_idle(phba);
 			spin_unlock_irq(host->host_lock);
-			return -ENODEV;
+			return  (rc == MBX_TIMEOUT) ? -ETIME : -ENODEV;
 		}
 		phba->sysfs_mbox.state = SMBOX_READING;
 	}
@@ -1017,7 +1017,7 @@ sysfs_mbox_read(struct kobject *kobj, char *buf, loff_t off, size_t count)
 		printk(KERN_WARNING  "mbox_read: Bad State\n");
 		sysfs_mbox_idle(phba);
 		spin_unlock_irq(host->host_lock);
-		return -EINVAL;
+		return -EAGAIN;
 	}
 
 	memcpy(buf, (uint8_t *) & phba->sysfs_mbox.mbox->mb + off, count);
diff --git a/drivers/scsi/lpfc/lpfc_ct.c b/drivers/scsi/lpfc/lpfc_ct.c
index b65ee57af53..cab2d9dec08 100644
--- a/drivers/scsi/lpfc/lpfc_ct.c
+++ b/drivers/scsi/lpfc/lpfc_ct.c
@@ -131,6 +131,7 @@ lpfc_ct_unsol_event(struct lpfc_hba * phba,
 	}
 
 ct_unsol_event_exit_piocbq:
+	list_del(&head);
 	if (pmbuf) {
 		list_for_each_entry_safe(matp, next_matp, &pmbuf->list, list) {
 			lpfc_mbuf_free(phba, matp->virt, matp->phys);
diff --git a/drivers/scsi/lpfc/lpfc_init.c b/drivers/scsi/lpfc/lpfc_init.c
index ef47b824cbe..16dc8c82b5c 100644
--- a/drivers/scsi/lpfc/lpfc_init.c
+++ b/drivers/scsi/lpfc/lpfc_init.c
@@ -1616,7 +1616,11 @@ lpfc_pci_probe_one(struct pci_dev *pdev, const struct pci_device_id *pid)
 		goto out_free_iocbq;
 	}
 
-	/* We can rely on a queue depth attribute only after SLI HBA setup */
+	/*
+	 * Set initial can_queue value since 0 is no longer supported and
+	 * scsi_add_host will fail. This will be adjusted later based on the
+	 * max xri value determined in hba setup.
+	 */
 	host->can_queue = phba->cfg_hba_queue_depth - 10;
 
 	/* Tell the midlayer we support 16 byte commands */
@@ -1656,6 +1660,12 @@ lpfc_pci_probe_one(struct pci_dev *pdev, const struct pci_device_id *pid)
 		goto out_free_irq;
 	}
 
+	/*
+	 * hba setup may have changed the hba_queue_depth so we need to adjust
+	 * the value of can_queue.
+	 */
+	host->can_queue = phba->cfg_hba_queue_depth - 10;
+
 	lpfc_discovery_wait(phba);
 
 	if (phba->cfg_poll & DISABLE_FCP_RING_INT) {
diff --git a/drivers/scsi/lpfc/lpfc_sli.c b/drivers/scsi/lpfc/lpfc_sli.c
index fbf108c9625..9802ee848f1 100644
--- a/drivers/scsi/lpfc/lpfc_sli.c
+++ b/drivers/scsi/lpfc/lpfc_sli.c
@@ -320,7 +320,8 @@ lpfc_sli_next_iotag(struct lpfc_hba * phba, struct lpfc_iocbq * iocbq)
 			kfree(old_arr);
 			return iotag;
 		}
-	}
+	} else
+		spin_unlock_irq(phba->host->host_lock);
 
 	lpfc_printf_log(phba, KERN_ERR,LOG_SLI,
 			"%d:0318 Failed to allocate IOTAG.last IOTAG is %d\n",
@@ -1399,11 +1400,11 @@ lpfc_sli_handle_slow_ring_event(struct lpfc_hba * phba,
 								 next_iocb,
 								 &saveq->list,
 								 list) {
+						list_del(&rspiocbp->list);
 						lpfc_sli_release_iocbq(phba,
 								     rspiocbp);
 					}
 				}
-
 				lpfc_sli_release_iocbq(phba, saveq);
 			}
 		}
-- 
cgit v1.2.3-70-g09d2


From dca9479be891eac33e53ab37769e18c3259646da Mon Sep 17 00:00:00 2001
From: James Smart <James.Smart@Emulex.Com>
Date: Tue, 1 Aug 2006 07:34:08 -0400
Subject: [SCSI] lpfc 8.1.7 : ID String and Message fixes

ID String and Message fixes
 - Fix switch symbolic name registration to match cross-OS values
 - Replace printk's with more standard lpfc_printf_log calls
 - Make all lpfc_printf_log message numbers unique

Signed-off-by: James Smart <James.Smart@emulex.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
---
 drivers/scsi/lpfc/lpfc_ct.c        | 12 ++++--------
 drivers/scsi/lpfc/lpfc_els.c       |  6 +++---
 drivers/scsi/lpfc/lpfc_hbadisc.c   | 12 ++++++------
 drivers/scsi/lpfc/lpfc_nportdisc.c |  2 +-
 drivers/scsi/lpfc/lpfc_scsi.c      |  2 +-
 drivers/scsi/lpfc/lpfc_sli.c       | 28 ++++++++++++++++------------
 6 files changed, 31 insertions(+), 31 deletions(-)

(limited to 'drivers/scsi')

diff --git a/drivers/scsi/lpfc/lpfc_ct.c b/drivers/scsi/lpfc/lpfc_ct.c
index cab2d9dec08..bbb7310210b 100644
--- a/drivers/scsi/lpfc/lpfc_ct.c
+++ b/drivers/scsi/lpfc/lpfc_ct.c
@@ -482,7 +482,7 @@ lpfc_cmpl_ct_cmd_gid_ft(struct lpfc_hba * phba, struct lpfc_iocbq * cmdiocb,
 		if (CTrsp->CommandResponse.bits.CmdRsp ==
 		    be16_to_cpu(SLI_CT_RESPONSE_FS_ACC)) {
 			lpfc_printf_log(phba, KERN_INFO, LOG_DISCOVERY,
-					"%d:0239 NameServer Rsp "
+					"%d:0208 NameServer Rsp "
 					"Data: x%x\n",
 					phba->brd_no,
 					phba->fc_flag);
@@ -589,13 +589,9 @@ lpfc_get_hba_sym_node_name(struct lpfc_hba * phba, uint8_t * symbp)
 
 	lpfc_decode_firmware_rev(phba, fwrev, 0);
 
-	if (phba->Port[0]) {
-		sprintf(symbp, "Emulex %s Port %s FV%s DV%s", phba->ModelName,
-			phba->Port, fwrev, lpfc_release_version);
-	} else {
-		sprintf(symbp, "Emulex %s FV%s DV%s", phba->ModelName,
-			fwrev, lpfc_release_version);
-	}
+	sprintf(symbp, "Emulex %s FV%s DV%s", phba->ModelName,
+		fwrev, lpfc_release_version);
+	return;
 }
 
 /*
diff --git a/drivers/scsi/lpfc/lpfc_els.c b/drivers/scsi/lpfc/lpfc_els.c
index b89f6cb641e..60f5cca0abe 100644
--- a/drivers/scsi/lpfc/lpfc_els.c
+++ b/drivers/scsi/lpfc/lpfc_els.c
@@ -2839,7 +2839,7 @@ lpfc_els_rsp_rps_acc(struct lpfc_hba * phba, LPFC_MBOXQ_t * pmb)
 
 	/* Xmit ELS RPS ACC response tag <ulpIoTag> */
 	lpfc_printf_log(phba, KERN_INFO, LOG_ELS,
-			"%d:0128 Xmit ELS RPS ACC response tag x%x "
+			"%d:0118 Xmit ELS RPS ACC response tag x%x "
 			"Data: x%x x%x x%x x%x x%x\n",
 			phba->brd_no,
 			elsiocb->iocb.ulpIoTag,
@@ -2948,7 +2948,7 @@ lpfc_els_rsp_rpl_acc(struct lpfc_hba * phba, uint16_t cmdsize,
 
 	/* Xmit ELS RPL ACC response tag <ulpIoTag> */
 	lpfc_printf_log(phba, KERN_INFO, LOG_ELS,
-			"%d:0128 Xmit ELS RPL ACC response tag x%x "
+			"%d:0120 Xmit ELS RPL ACC response tag x%x "
 			"Data: x%x x%x x%x x%x x%x\n",
 			phba->brd_no,
 			elsiocb->iocb.ulpIoTag,
@@ -3109,7 +3109,7 @@ lpfc_els_rcv_fan(struct lpfc_hba * phba, struct lpfc_iocbq * cmdiocb,
 	struct lpfc_nodelist *ndlp, *next_ndlp;
 
 	/* FAN received */
-	lpfc_printf_log(phba, KERN_INFO, LOG_ELS, "%d:265 FAN received\n",
+	lpfc_printf_log(phba, KERN_INFO, LOG_ELS, "%d:0265 FAN received\n",
 								phba->brd_no);
 
 	icmd = &cmdiocb->iocb;
diff --git a/drivers/scsi/lpfc/lpfc_hbadisc.c b/drivers/scsi/lpfc/lpfc_hbadisc.c
index 4d6cf990c4f..1c3f2689155 100644
--- a/drivers/scsi/lpfc/lpfc_hbadisc.c
+++ b/drivers/scsi/lpfc/lpfc_hbadisc.c
@@ -1782,7 +1782,7 @@ lpfc_findnode_did(struct lpfc_hba * phba, uint32_t order, uint32_t did)
 				/* LOG change to REGLOGIN */
 				/* FIND node DID reglogin */
 				lpfc_printf_log(phba, KERN_INFO, LOG_NODE,
-						"%d:0931 FIND node DID reglogin"
+						"%d:0901 FIND node DID reglogin"
 						" Data: x%p x%x x%x x%x\n",
 						phba->brd_no,
 						ndlp, ndlp->nlp_DID,
@@ -1805,7 +1805,7 @@ lpfc_findnode_did(struct lpfc_hba * phba, uint32_t order, uint32_t did)
 				/* LOG change to PRLI */
 				/* FIND node DID prli */
 				lpfc_printf_log(phba, KERN_INFO, LOG_NODE,
-						"%d:0931 FIND node DID prli "
+						"%d:0902 FIND node DID prli "
 						"Data: x%p x%x x%x x%x\n",
 						phba->brd_no,
 						ndlp, ndlp->nlp_DID,
@@ -1828,7 +1828,7 @@ lpfc_findnode_did(struct lpfc_hba * phba, uint32_t order, uint32_t did)
 				/* LOG change to NPR */
 				/* FIND node DID npr */
 				lpfc_printf_log(phba, KERN_INFO, LOG_NODE,
-						"%d:0931 FIND node DID npr "
+						"%d:0903 FIND node DID npr "
 						"Data: x%p x%x x%x x%x\n",
 						phba->brd_no,
 						ndlp, ndlp->nlp_DID,
@@ -1851,7 +1851,7 @@ lpfc_findnode_did(struct lpfc_hba * phba, uint32_t order, uint32_t did)
 				/* LOG change to UNUSED */
 				/* FIND node DID unused */
 				lpfc_printf_log(phba, KERN_INFO, LOG_NODE,
-						"%d:0931 FIND node DID unused "
+						"%d:0905 FIND node DID unused "
 						"Data: x%p x%x x%x x%x\n",
 						phba->brd_no,
 						ndlp, ndlp->nlp_DID,
@@ -2335,7 +2335,7 @@ lpfc_disc_timeout_handler(struct lpfc_hba *phba)
 		initlinkmbox = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
 		if (!initlinkmbox) {
 			lpfc_printf_log(phba, KERN_ERR, LOG_DISCOVERY,
-					"%d:0226 Device Discovery "
+					"%d:0206 Device Discovery "
 					"completion error\n",
 					phba->brd_no);
 			phba->hba_state = LPFC_HBA_ERROR;
@@ -2365,7 +2365,7 @@ lpfc_disc_timeout_handler(struct lpfc_hba *phba)
 		if (!clearlambox) {
 			clrlaerr = 1;
 			lpfc_printf_log(phba, KERN_ERR, LOG_DISCOVERY,
-					"%d:0226 Device Discovery "
+					"%d:0207 Device Discovery "
 					"completion error\n",
 					phba->brd_no);
 			phba->hba_state = LPFC_HBA_ERROR;
diff --git a/drivers/scsi/lpfc/lpfc_nportdisc.c b/drivers/scsi/lpfc/lpfc_nportdisc.c
index bd0b0e293d6..b38021a32c9 100644
--- a/drivers/scsi/lpfc/lpfc_nportdisc.c
+++ b/drivers/scsi/lpfc/lpfc_nportdisc.c
@@ -179,7 +179,7 @@ lpfc_els_abort(struct lpfc_hba * phba, struct lpfc_nodelist * ndlp,
 
 	/* Abort outstanding I/O on NPort <nlp_DID> */
 	lpfc_printf_log(phba, KERN_INFO, LOG_DISCOVERY,
-			"%d:0201 Abort outstanding I/O on NPort x%x "
+			"%d:0205 Abort outstanding I/O on NPort x%x "
 			"Data: x%x x%x x%x\n",
 			phba->brd_no, ndlp->nlp_DID, ndlp->nlp_flag,
 			ndlp->nlp_state, ndlp->nlp_rpi);
diff --git a/drivers/scsi/lpfc/lpfc_scsi.c b/drivers/scsi/lpfc/lpfc_scsi.c
index a760a44173d..0811c824e0e 100644
--- a/drivers/scsi/lpfc/lpfc_scsi.c
+++ b/drivers/scsi/lpfc/lpfc_scsi.c
@@ -1104,7 +1104,7 @@ lpfc_reset_bus_handler(struct scsi_cmnd *cmnd)
 					  ndlp->rport->dd_data);
 		if (ret != SUCCESS) {
 			lpfc_printf_log(phba, KERN_ERR, LOG_FCP,
-				"%d:0713 Bus Reset on target %d failed\n",
+				"%d:0700 Bus Reset on target %d failed\n",
 				phba->brd_no, i);
 			err_count++;
 		}
diff --git a/drivers/scsi/lpfc/lpfc_sli.c b/drivers/scsi/lpfc/lpfc_sli.c
index 9802ee848f1..70f4d5a1348 100644
--- a/drivers/scsi/lpfc/lpfc_sli.c
+++ b/drivers/scsi/lpfc/lpfc_sli.c
@@ -970,9 +970,11 @@ void lpfc_sli_poll_fcp_ring(struct lpfc_hba * phba)
 			 * resources need to be recovered.
 			 */
 			if (unlikely(irsp->ulpCommand == CMD_XRI_ABORTED_CX)) {
-				printk(KERN_INFO "%s: IOCB cmd 0x%x processed."
-				       " Skipping completion\n", __FUNCTION__,
-				       irsp->ulpCommand);
+				lpfc_printf_log(phba, KERN_INFO, LOG_SLI,
+						"%d:0314 IOCB cmd 0x%x"
+						" processed. Skipping"
+						" completion", phba->brd_no,
+						irsp->ulpCommand);
 				break;
 			}
 
@@ -1105,7 +1107,7 @@ lpfc_sli_handle_fast_ring_event(struct lpfc_hba * phba,
 		if (unlikely(irsp->ulpStatus)) {
 			/* Rsp ring <ringno> error: IOCB */
 			lpfc_printf_log(phba, KERN_WARNING, LOG_SLI,
-				"%d:0326 Rsp Ring %d error: IOCB Data: "
+				"%d:0336 Rsp Ring %d error: IOCB Data: "
 				"x%x x%x x%x x%x x%x x%x x%x x%x\n",
 				phba->brd_no, pring->ringno,
 				irsp->un.ulpWord[0], irsp->un.ulpWord[1],
@@ -1123,9 +1125,11 @@ lpfc_sli_handle_fast_ring_event(struct lpfc_hba * phba,
 			 * resources need to be recovered.
 			 */
 			if (unlikely(irsp->ulpCommand == CMD_XRI_ABORTED_CX)) {
-				printk(KERN_INFO "%s: IOCB cmd 0x%x processed. "
-				       "Skipping completion\n", __FUNCTION__,
-				       irsp->ulpCommand);
+				lpfc_printf_log(phba, KERN_INFO, LOG_SLI,
+						"%d:0333 IOCB cmd 0x%x"
+						" processed. Skipping"
+						" completion\n", phba->brd_no,
+						irsp->ulpCommand);
 				break;
 			}
 
@@ -1156,7 +1160,7 @@ lpfc_sli_handle_fast_ring_event(struct lpfc_hba * phba,
 			} else {
 				/* Unknown IOCB command */
 				lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
-					"%d:0321 Unknown IOCB command "
+					"%d:0334 Unknown IOCB command "
 					"Data: x%x, x%x x%x x%x x%x\n",
 					phba->brd_no, type, irsp->ulpCommand,
 					irsp->ulpStatus, irsp->ulpIoTag,
@@ -1239,7 +1243,7 @@ lpfc_sli_handle_slow_ring_event(struct lpfc_hba * phba,
 		lpfc_printf_log(phba,
 				KERN_ERR,
 				LOG_SLI,
-				"%d:0312 Ring %d handler: portRspPut %d "
+				"%d:0303 Ring %d handler: portRspPut %d "
 				"is bigger then rsp ring %d\n",
 				phba->brd_no,
 				pring->ringno, portRspPut, portRspMax);
@@ -1384,7 +1388,7 @@ lpfc_sli_handle_slow_ring_event(struct lpfc_hba * phba,
 					lpfc_printf_log(phba,
 						KERN_ERR,
 						LOG_SLI,
-						"%d:0321 Unknown IOCB command "
+						"%d:0335 Unknown IOCB command "
 						"Data: x%x x%x x%x x%x\n",
 						phba->brd_no,
 						irsp->ulpCommand,
@@ -1759,7 +1763,7 @@ lpfc_sli_brdrestart(struct lpfc_hba * phba)
 
 	/* Restart HBA */
 	lpfc_printf_log(phba, KERN_INFO, LOG_SLI,
-			"%d:0328 Restart HBA Data: x%x x%x\n", phba->brd_no,
+			"%d:0337 Restart HBA Data: x%x x%x\n", phba->brd_no,
 			phba->hba_state, psli->sli_flag);
 
 	word0 = 0;
@@ -3016,7 +3020,7 @@ lpfc_sli_issue_iocb_wait(struct lpfc_hba * phba,
 
 		if (timeleft == 0) {
 			lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
-					"%d:0329 IOCB wait timeout error - no "
+					"%d:0338 IOCB wait timeout error - no "
 					"wake response Data x%x\n",
 					phba->brd_no, timeout);
 			retval = IOCB_TIMEDOUT;
-- 
cgit v1.2.3-70-g09d2


From 416780d3a7836a99568c6728830ced592a7a22e3 Mon Sep 17 00:00:00 2001
From: James Smart <James.Smart@Emulex.Com>
Date: Tue, 1 Aug 2006 07:34:16 -0400
Subject: [SCSI] lpfc 8.1.7 : Change version number to 8.1.8

Change version number to 8.1.8

Signed-off-by: James Smart <James.Smart@emulex.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
---
 drivers/scsi/lpfc/lpfc_version.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'drivers/scsi')

diff --git a/drivers/scsi/lpfc/lpfc_version.h b/drivers/scsi/lpfc/lpfc_version.h
index 10e89c6ae82..c7963f91d0a 100644
--- a/drivers/scsi/lpfc/lpfc_version.h
+++ b/drivers/scsi/lpfc/lpfc_version.h
@@ -18,7 +18,7 @@
  * included with this package.                                     *
  *******************************************************************/
 
-#define LPFC_DRIVER_VERSION "8.1.7"
+#define LPFC_DRIVER_VERSION "8.1.8"
 
 #define LPFC_DRIVER_NAME "lpfc"
 
-- 
cgit v1.2.3-70-g09d2


From b797b6de9d4d8d085169a507c54b18e74dbe4f21 Mon Sep 17 00:00:00 2001
From: Shyam Sundar <shyam.sundar@qlogic.com>
Date: Tue, 1 Aug 2006 13:48:13 -0700
Subject: [SCSI] qla2xxx: Correct endianess problem while issuing a Marker IOCB
 on ISP24xx.

Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
---
 drivers/scsi/qla2xxx/qla_iocb.c | 1 +
 1 file changed, 1 insertion(+)

(limited to 'drivers/scsi')

diff --git a/drivers/scsi/qla2xxx/qla_iocb.c b/drivers/scsi/qla2xxx/qla_iocb.c
index 2b60a27eff0..c5b3c610a32 100644
--- a/drivers/scsi/qla2xxx/qla_iocb.c
+++ b/drivers/scsi/qla2xxx/qla_iocb.c
@@ -471,6 +471,7 @@ __qla2x00_marker(scsi_qla_host_t *ha, uint16_t loop_id, uint16_t lun,
 			mrk24->nport_handle = cpu_to_le16(loop_id);
 			mrk24->lun[1] = LSB(lun);
 			mrk24->lun[2] = MSB(lun);
+			host_to_fcp_swap(mrk24->lun, sizeof(mrk24->lun));
 		} else {
 			SET_TARGET_ID(ha, mrk->target, loop_id);
 			mrk->lun = cpu_to_le16(lun);
-- 
cgit v1.2.3-70-g09d2


From 45ebeb560570fd7ebae29a4105b81874063d5425 Mon Sep 17 00:00:00 2001
From: Andrew Vasquez <andrew.vasquez@qlogic.com>
Date: Tue, 1 Aug 2006 13:48:14 -0700
Subject: [SCSI] qla2xxx: Log Trace/Diagonostic asynchronous events.

Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
---
 drivers/scsi/qla2xxx/qla_def.h | 1 +
 drivers/scsi/qla2xxx/qla_isr.c | 5 +++++
 2 files changed, 6 insertions(+)

(limited to 'drivers/scsi')

diff --git a/drivers/scsi/qla2xxx/qla_def.h b/drivers/scsi/qla2xxx/qla_def.h
index 139ea0e27fd..0930260aec2 100644
--- a/drivers/scsi/qla2xxx/qla_def.h
+++ b/drivers/scsi/qla2xxx/qla_def.h
@@ -487,6 +487,7 @@ typedef struct {
 #define MBA_IP_RCV_BUFFER_EMPTY 0x8026	/* IP receive buffer queue empty. */
 #define MBA_IP_HDR_DATA_SPLIT	0x8027	/* IP header/data splitting feature */
 					/* used. */
+#define MBA_TRACE_NOTIFICATION	0x8028	/* Trace/Diagnostic notification. */
 #define MBA_POINT_TO_POINT	0x8030	/* Point to point mode. */
 #define MBA_CMPLT_1_16BIT	0x8031	/* Completion 1 16bit IOSB. */
 #define MBA_CMPLT_2_16BIT	0x8032	/* Completion 2 16bit IOSB. */
diff --git a/drivers/scsi/qla2xxx/qla_isr.c b/drivers/scsi/qla2xxx/qla_isr.c
index 795bf15b1b8..de0613135f7 100644
--- a/drivers/scsi/qla2xxx/qla_isr.c
+++ b/drivers/scsi/qla2xxx/qla_isr.c
@@ -587,6 +587,11 @@ qla2x00_async_event(scsi_qla_host_t *ha, uint16_t *mb)
 		DEBUG2(printk("scsi(%ld): Discard RND Frame -- %04x %04x "
 		    "%04x.\n", ha->host_no, mb[1], mb[2], mb[3]));
 		break;
+
+	case MBA_TRACE_NOTIFICATION:
+		DEBUG2(printk("scsi(%ld): Trace Notification -- %04x %04x.\n",
+		ha->host_no, mb[1], mb[2]));
+		break;
 	}
 }
 
-- 
cgit v1.2.3-70-g09d2


From b0328beed0786b07d0102ed59cbf0b54ad8f726b Mon Sep 17 00:00:00 2001
From: Vladislav Bolkhovitin <vst@vlnb.net>
Date: Tue, 1 Aug 2006 13:48:15 -0700
Subject: [SCSI] qla2xxx: Fix to allow to reset devices using sg interface
 (sg_reset).

Currently it is impossible to reset provided by Qlogic QLA2xxx driver
SCSI devices externally using corresponding sg devices, particularly via
sg_reset utility, because qla2xxx driver in qla2xxx_eh_device_reset()
function checks if the input scsi_cmnd has its private data (CMD_SP())
attached. Then the found pointer isn't used anywhere inside of
qla2xxx_eh_device_reset(). If the RESET request comes from sg device, it
doesn't have such private data.

The attached patch removes check for non-NULL CMD_SP() from
qla2xxx_eh_device_reset(), hence allows to reset QLA2xxx's devices using
corresponding sg devices.

AV: change applies to bus/host reset handlers as well.

Signed-off-by: Vladislav Bolkhovitin <vst@vlnb.net>
Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
---
 drivers/scsi/qla2xxx/qla_os.c | 12 +++---------
 1 file changed, 3 insertions(+), 9 deletions(-)

(limited to 'drivers/scsi')

diff --git a/drivers/scsi/qla2xxx/qla_os.c b/drivers/scsi/qla2xxx/qla_os.c
index ec7ebb6037e..1e2b95bac83 100644
--- a/drivers/scsi/qla2xxx/qla_os.c
+++ b/drivers/scsi/qla2xxx/qla_os.c
@@ -744,7 +744,6 @@ qla2xxx_eh_device_reset(struct scsi_cmnd *cmd)
 {
 	scsi_qla_host_t *ha = to_qla_host(cmd->device->host);
 	fc_port_t *fcport = (struct fc_port *) cmd->device->hostdata;
-	srb_t *sp;
 	int ret;
 	unsigned int id, lun;
 	unsigned long serial;
@@ -755,8 +754,7 @@ qla2xxx_eh_device_reset(struct scsi_cmnd *cmd)
 	lun = cmd->device->lun;
 	serial = cmd->serial_number;
 
-	sp = (srb_t *) CMD_SP(cmd);
-	if (!sp || !fcport)
+	if (!fcport)
 		return ret;
 
 	qla_printk(KERN_INFO, ha,
@@ -875,7 +873,6 @@ qla2xxx_eh_bus_reset(struct scsi_cmnd *cmd)
 {
 	scsi_qla_host_t *ha = to_qla_host(cmd->device->host);
 	fc_port_t *fcport = (struct fc_port *) cmd->device->hostdata;
-	srb_t *sp;
 	int ret;
 	unsigned int id, lun;
 	unsigned long serial;
@@ -886,8 +883,7 @@ qla2xxx_eh_bus_reset(struct scsi_cmnd *cmd)
 	lun = cmd->device->lun;
 	serial = cmd->serial_number;
 
-	sp = (srb_t *) CMD_SP(cmd);
-	if (!sp || !fcport)
+	if (!fcport)
 		return ret;
 
 	qla_printk(KERN_INFO, ha,
@@ -936,7 +932,6 @@ qla2xxx_eh_host_reset(struct scsi_cmnd *cmd)
 {
 	scsi_qla_host_t *ha = to_qla_host(cmd->device->host);
 	fc_port_t *fcport = (struct fc_port *) cmd->device->hostdata;
-	srb_t *sp;
 	int ret;
 	unsigned int id, lun;
 	unsigned long serial;
@@ -947,8 +942,7 @@ qla2xxx_eh_host_reset(struct scsi_cmnd *cmd)
 	lun = cmd->device->lun;
 	serial = cmd->serial_number;
 
-	sp = (srb_t *) CMD_SP(cmd);
-	if (!sp || !fcport)
+	if (!fcport)
 		return ret;
 
 	qla_printk(KERN_INFO, ha,
-- 
cgit v1.2.3-70-g09d2


From c2602c48b5ebde55b418ba252737bf60caa4bab0 Mon Sep 17 00:00:00 2001
From: Andrew Vasquez <andrew.vasquez@qlogic.com>
Date: Tue, 1 Aug 2006 13:48:16 -0700
Subject: [SCSI] qla2xxx: Update version number to 8.01.05-k4.

Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
---
 drivers/scsi/qla2xxx/qla_version.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'drivers/scsi')

diff --git a/drivers/scsi/qla2xxx/qla_version.h b/drivers/scsi/qla2xxx/qla_version.h
index d2d68344065..f5826bf04a2 100644
--- a/drivers/scsi/qla2xxx/qla_version.h
+++ b/drivers/scsi/qla2xxx/qla_version.h
@@ -7,7 +7,7 @@
 /*
  * Driver version
  */
-#define QLA2XXX_VERSION      "8.01.05-k3"
+#define QLA2XXX_VERSION      "8.01.05-k4"
 
 #define QLA_DRIVER_MAJOR_VER	8
 #define QLA_DRIVER_MINOR_VER	1
-- 
cgit v1.2.3-70-g09d2


From 3e74051bc7b780c5ba28939f9d5c4cd3280a5ff7 Mon Sep 17 00:00:00 2001
From: Christoph Hellwig <hch@lst.de>
Date: Sun, 30 Jul 2006 19:13:36 +0200
Subject: [SCSI] hptiop: backout ioctl mess

The hptiop just got merged with a horrible amount of really bad ioctl
code that is against the standards for new scsi drivers.  This patch
backs it out (and fixes a small bug where scsi_add_host is called to
early).  We can re-add proper APIs once we agree on them.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
---
 drivers/scsi/hptiop.c | 566 +-------------------------------------------------
 1 file changed, 8 insertions(+), 558 deletions(-)

(limited to 'drivers/scsi')

diff --git a/drivers/scsi/hptiop.c b/drivers/scsi/hptiop.c
index 74d4d22e5c0..bcb3444f1dc 100644
--- a/drivers/scsi/hptiop.c
+++ b/drivers/scsi/hptiop.c
@@ -45,10 +45,6 @@ static char driver_name[] = "hptiop";
 static const char driver_name_long[] = "RocketRAID 3xxx SATA Controller driver";
 static const char driver_ver[] = "v1.0 (060426)";
 
-static DEFINE_SPINLOCK(hptiop_hba_list_lock);
-static LIST_HEAD(hptiop_hba_list);
-static int hptiop_cdev_major = -1;
-
 static void hptiop_host_request_callback(struct hptiop_hba *hba, u32 tag);
 static void hptiop_iop_request_callback(struct hptiop_hba *hba, u32 tag);
 static void hptiop_message_callback(struct hptiop_hba *hba, u32 msg);
@@ -620,532 +616,11 @@ static int hptiop_adjust_disk_queue_depth(struct scsi_device *sdev,
 	return queue_depth;
 }
 
-struct hptiop_getinfo {
-	char __user *buffer;
-	loff_t buflength;
-	loff_t bufoffset;
-	loff_t buffillen;
-	loff_t filpos;
-};
-
-static void hptiop_copy_mem_info(struct hptiop_getinfo *pinfo,
-					char *data, int datalen)
-{
-	if (pinfo->filpos < pinfo->bufoffset) {
-		if (pinfo->filpos + datalen <= pinfo->bufoffset) {
-			pinfo->filpos += datalen;
-			return;
-		} else {
-			data += (pinfo->bufoffset - pinfo->filpos);
-			datalen  -= (pinfo->bufoffset - pinfo->filpos);
-			pinfo->filpos = pinfo->bufoffset;
-		}
-	}
-
-	pinfo->filpos += datalen;
-	if (pinfo->buffillen == pinfo->buflength)
-		return;
-
-	if (pinfo->buflength - pinfo->buffillen < datalen)
-		datalen = pinfo->buflength - pinfo->buffillen;
-
-	if (copy_to_user(pinfo->buffer + pinfo->buffillen, data, datalen))
-		return;
-
-	pinfo->buffillen += datalen;
-}
-
-static int hptiop_copy_info(struct hptiop_getinfo *pinfo, char *fmt, ...)
-{
-	va_list args;
-	char buf[128];
-	int len;
-
-	va_start(args, fmt);
-	len = vsnprintf(buf, sizeof(buf), fmt, args);
-	va_end(args);
-	hptiop_copy_mem_info(pinfo, buf, len);
-	return len;
-}
-
-static void hptiop_ioctl_done(struct hpt_ioctl_k *arg)
-{
-	arg->done = NULL;
-	wake_up(&arg->hba->ioctl_wq);
-}
-
-static void hptiop_do_ioctl(struct hpt_ioctl_k *arg)
-{
-	struct hptiop_hba *hba = arg->hba;
-	u32 val;
-	struct hpt_iop_request_ioctl_command __iomem *req;
-	int ioctl_retry = 0;
-
-	dprintk("scsi%d: hptiop_do_ioctl\n", hba->host->host_no);
-
-	/*
-	 * check (in + out) buff size from application.
-	 * outbuf must be dword aligned.
-	 */
-	if (((arg->inbuf_size + 3) & ~3) + arg->outbuf_size >
-			hba->max_request_size
-				- sizeof(struct hpt_iop_request_header)
-				- 4 * sizeof(u32)) {
-		dprintk("scsi%d: ioctl buf size (%d/%d) is too large\n",
-				hba->host->host_no,
-				arg->inbuf_size, arg->outbuf_size);
-		arg->result = HPT_IOCTL_RESULT_FAILED;
-		return;
-	}
-
-retry:
-	spin_lock_irq(hba->host->host_lock);
-
-	val = readl(&hba->iop->inbound_queue);
-	if (val == IOPMU_QUEUE_EMPTY) {
-		spin_unlock_irq(hba->host->host_lock);
-		dprintk("scsi%d: no free req for ioctl\n", hba->host->host_no);
-		arg->result = -1;
-		return;
-	}
-
-	req = (struct hpt_iop_request_ioctl_command __iomem *)
-			((unsigned long)hba->iop + val);
-
-	writel(HPT_CTL_CODE_LINUX_TO_IOP(arg->ioctl_code),
-			&req->ioctl_code);
-	writel(arg->inbuf_size, &req->inbuf_size);
-	writel(arg->outbuf_size, &req->outbuf_size);
-
-	/*
-	 * use the buffer on the IOP local memory first, then copy it
-	 * back to host.
-	 * the caller's request buffer shoudl be little-endian.
-	 */
-	if (arg->inbuf_size)
-		memcpy_toio(req->buf, arg->inbuf, arg->inbuf_size);
-
-	/* correct the controller ID for IOP */
-	if ((arg->ioctl_code == HPT_IOCTL_GET_CHANNEL_INFO ||
-		arg->ioctl_code == HPT_IOCTL_GET_CONTROLLER_INFO_V2 ||
-		arg->ioctl_code == HPT_IOCTL_GET_CONTROLLER_INFO)
-		&& arg->inbuf_size >= sizeof(u32))
-		writel(0, req->buf);
-
-	writel(IOP_REQUEST_TYPE_IOCTL_COMMAND, &req->header.type);
-	writel(0, &req->header.flags);
-	writel(offsetof(struct hpt_iop_request_ioctl_command, buf)
-			+ arg->inbuf_size, &req->header.size);
-	writel((u32)(unsigned long)arg, &req->header.context);
-	writel(BITS_PER_LONG > 32 ? (u32)((unsigned long)arg>>32) : 0,
-			&req->header.context_hi32);
-	writel(IOP_RESULT_PENDING, &req->header.result);
-
-	arg->result = HPT_IOCTL_RESULT_FAILED;
-	arg->done = hptiop_ioctl_done;
-
-	writel(val, &hba->iop->inbound_queue);
-	hptiop_pci_posting_flush(hba->iop);
-
-	spin_unlock_irq(hba->host->host_lock);
-
-	wait_event_timeout(hba->ioctl_wq, arg->done == NULL, 60 * HZ);
-
-	if (arg->done != NULL) {
-		hptiop_reset_hba(hba);
-		if (ioctl_retry++ < 3)
-			goto retry;
-	}
-
-	dprintk("hpt_iop_ioctl %x result %d\n",
-			arg->ioctl_code, arg->result);
-}
-
-static int __hpt_do_ioctl(struct hptiop_hba *hba, u32 code, void *inbuf,
-			u32 insize, void *outbuf, u32 outsize)
-{
-	struct hpt_ioctl_k arg;
-	arg.hba = hba;
-	arg.ioctl_code = code;
-	arg.inbuf = inbuf;
-	arg.outbuf = outbuf;
-	arg.inbuf_size = insize;
-	arg.outbuf_size = outsize;
-	arg.bytes_returned = NULL;
-	hptiop_do_ioctl(&arg);
-	return arg.result;
-}
-
-static inline int hpt_id_valid(__le32 id)
-{
-	return id != 0 && id != cpu_to_le32(0xffffffff);
-}
-
-static int hptiop_get_controller_info(struct hptiop_hba *hba,
-					struct hpt_controller_info *pinfo)
-{
-	int id = 0;
-
-	return __hpt_do_ioctl(hba, HPT_IOCTL_GET_CONTROLLER_INFO,
-		&id, sizeof(int), pinfo, sizeof(*pinfo));
-}
-
-
-static int hptiop_get_channel_info(struct hptiop_hba *hba, int bus,
-					struct hpt_channel_info *pinfo)
-{
-	u32 ids[2];
-
-	ids[0] = 0;
-	ids[1] = bus;
-	return __hpt_do_ioctl(hba, HPT_IOCTL_GET_CHANNEL_INFO,
-				ids, sizeof(ids), pinfo, sizeof(*pinfo));
-
-}
-
-static int hptiop_get_logical_devices(struct hptiop_hba *hba,
-					__le32 *pids, int maxcount)
-{
-	int i;
-	u32 count = maxcount - 1;
-
-	if (__hpt_do_ioctl(hba, HPT_IOCTL_GET_LOGICAL_DEVICES,
-			&count, sizeof(u32),
-			pids, sizeof(u32) * maxcount))
-		return -1;
-
-	maxcount = le32_to_cpu(pids[0]);
-	for (i = 0; i < maxcount; i++)
-		pids[i] = pids[i+1];
-
-	return maxcount;
-}
-
-static int hptiop_get_device_info_v3(struct hptiop_hba *hba, __le32 id,
-				struct hpt_logical_device_info_v3 *pinfo)
-{
-	return __hpt_do_ioctl(hba, HPT_IOCTL_GET_DEVICE_INFO_V3,
-				&id, sizeof(u32),
-				pinfo, sizeof(*pinfo));
-}
-
-static const char *get_array_status(struct hpt_logical_device_info_v3 *devinfo)
-{
-	static char s[64];
-	u32 flags = le32_to_cpu(devinfo->u.array.flags);
-	u32 trans_prog = le32_to_cpu(devinfo->u.array.transforming_progress);
-	u32 reb_prog = le32_to_cpu(devinfo->u.array.rebuilding_progress);
-
-	if (flags & ARRAY_FLAG_DISABLED)
-		return "Disabled";
-	else if (flags & ARRAY_FLAG_TRANSFORMING)
-		sprintf(s, "Expanding/Migrating %d.%d%%%s%s",
-			trans_prog / 100,
-			trans_prog % 100,
-			(flags & (ARRAY_FLAG_NEEDBUILDING|ARRAY_FLAG_BROKEN))?
-					", Critical" : "",
-			((flags & ARRAY_FLAG_NEEDINITIALIZING) &&
-			 !(flags & ARRAY_FLAG_REBUILDING) &&
-			 !(flags & ARRAY_FLAG_INITIALIZING))?
-					", Unintialized" : "");
-	else if ((flags & ARRAY_FLAG_BROKEN) &&
-				devinfo->u.array.array_type != AT_RAID6)
-		return "Critical";
-	else if (flags & ARRAY_FLAG_REBUILDING)
-		sprintf(s,
-			(flags & ARRAY_FLAG_NEEDINITIALIZING)?
-				"%sBackground initializing %d.%d%%" :
-					"%sRebuilding %d.%d%%",
-			(flags & ARRAY_FLAG_BROKEN)? "Critical, " : "",
-			reb_prog / 100,
-			reb_prog % 100);
-	else if (flags & ARRAY_FLAG_VERIFYING)
-		sprintf(s, "%sVerifying %d.%d%%",
-			(flags & ARRAY_FLAG_BROKEN)? "Critical, " : "",
-			reb_prog / 100,
-			reb_prog % 100);
-	else if (flags & ARRAY_FLAG_INITIALIZING)
-		sprintf(s, "%sForground initializing %d.%d%%",
-			(flags & ARRAY_FLAG_BROKEN)? "Critical, " : "",
-			reb_prog / 100,
-			reb_prog % 100);
-	else if (flags & ARRAY_FLAG_NEEDTRANSFORM)
-		sprintf(s,"%s%s%s", "Need Expanding/Migrating",
-			(flags & ARRAY_FLAG_BROKEN)? "Critical, " : "",
-			((flags & ARRAY_FLAG_NEEDINITIALIZING) &&
-			 !(flags & ARRAY_FLAG_REBUILDING) &&
-			 !(flags & ARRAY_FLAG_INITIALIZING))?
-				", Unintialized" : "");
-	else if (flags & ARRAY_FLAG_NEEDINITIALIZING &&
-		!(flags & ARRAY_FLAG_REBUILDING) &&
-		!(flags & ARRAY_FLAG_INITIALIZING))
-		sprintf(s,"%sUninitialized",
-			(flags & ARRAY_FLAG_BROKEN)? "Critical, " : "");
-	else if ((flags & ARRAY_FLAG_NEEDBUILDING) ||
-			(flags & ARRAY_FLAG_BROKEN))
-		return "Critical";
-	else
-		return "Normal";
-	return s;
-}
-
-static void hptiop_dump_devinfo(struct hptiop_hba *hba,
-			struct hptiop_getinfo *pinfo, __le32 id, int indent)
-{
-	struct hpt_logical_device_info_v3 devinfo;
-	int i;
-	u64 capacity;
-
-	for (i = 0; i < indent; i++)
-		hptiop_copy_info(pinfo, "\t");
-
-	if (hptiop_get_device_info_v3(hba, id, &devinfo)) {
-		hptiop_copy_info(pinfo, "unknown\n");
-		return;
-	}
-
-	switch (devinfo.type) {
-
-	case LDT_DEVICE: {
-		struct hd_driveid *driveid;
-		u32 flags = le32_to_cpu(devinfo.u.device.flags);
-
-		driveid = (struct hd_driveid *)devinfo.u.device.ident;
-		/* model[] is 40 chars long, but we just want 20 chars here */
-		driveid->model[20] = 0;
-
-		if (indent)
-			if (flags & DEVICE_FLAG_DISABLED)
-				hptiop_copy_info(pinfo,"Missing\n");
-			else
-				hptiop_copy_info(pinfo, "CH%d %s\n",
-					devinfo.u.device.path_id + 1,
-					driveid->model);
-		else {
-			capacity = le64_to_cpu(devinfo.capacity) * 512;
-			do_div(capacity, 1000000);
-			hptiop_copy_info(pinfo,
-				"CH%d %s, %lluMB, %s %s%s%s%s\n",
-				devinfo.u.device.path_id + 1,
-				driveid->model,
-				capacity,
-				(flags & DEVICE_FLAG_DISABLED)?
-					"Disabled" : "Normal",
-				devinfo.u.device.read_ahead_enabled?
-						"[RA]" : "",
-				devinfo.u.device.write_cache_enabled?
-						"[WC]" : "",
-				devinfo.u.device.TCQ_enabled?
-						"[TCQ]" : "",
-				devinfo.u.device.NCQ_enabled?
-						"[NCQ]" : ""
-			);
-		}
-		break;
-	}
-
-	case LDT_ARRAY:
-		if (devinfo.target_id != INVALID_TARGET_ID)
-			hptiop_copy_info(pinfo, "[DISK %d_%d] ",
-					devinfo.vbus_id, devinfo.target_id);
-
-		capacity = le64_to_cpu(devinfo.capacity) * 512;
-		do_div(capacity, 1000000);
-		hptiop_copy_info(pinfo, "%s (%s), %lluMB, %s\n",
-			devinfo.u.array.name,
-			devinfo.u.array.array_type==AT_RAID0? "RAID0" :
-				devinfo.u.array.array_type==AT_RAID1? "RAID1" :
-				devinfo.u.array.array_type==AT_RAID5? "RAID5" :
-				devinfo.u.array.array_type==AT_RAID6? "RAID6" :
-				devinfo.u.array.array_type==AT_JBOD? "JBOD" :
-					"unknown",
-			capacity,
-			get_array_status(&devinfo));
-		for (i = 0; i < devinfo.u.array.ndisk; i++) {
-			if (hpt_id_valid(devinfo.u.array.members[i])) {
-				if (cpu_to_le16(1<<i) &
-					devinfo.u.array.critical_members)
-					hptiop_copy_info(pinfo, "\t*");
-				hptiop_dump_devinfo(hba, pinfo,
-					devinfo.u.array.members[i], indent+1);
-			}
-			else
-				hptiop_copy_info(pinfo, "\tMissing\n");
-		}
-		if (id == devinfo.u.array.transform_source) {
-			hptiop_copy_info(pinfo, "\tExpanding/Migrating to:\n");
-			hptiop_dump_devinfo(hba, pinfo,
-				devinfo.u.array.transform_target, indent+1);
-		}
-		break;
-	}
-}
-
 static ssize_t hptiop_show_version(struct class_device *class_dev, char *buf)
 {
 	return snprintf(buf, PAGE_SIZE, "%s\n", driver_ver);
 }
 
-static ssize_t hptiop_cdev_read(struct file *filp, char __user *buf,
-				size_t count, loff_t *ppos)
-{
-	struct hptiop_hba *hba = filp->private_data;
-	struct hptiop_getinfo info;
-	int i, j, ndev;
-	struct hpt_controller_info con_info;
-	struct hpt_channel_info chan_info;
-	__le32 ids[32];
-
-	info.buffer     = buf;
-	info.buflength  = count;
-	info.bufoffset  = ppos ? *ppos : 0;
-	info.filpos     = 0;
-	info.buffillen  = 0;
-
-	if (hptiop_get_controller_info(hba, &con_info))
-		return -EIO;
-
-	for (i = 0; i < con_info.num_buses; i++) {
-		if (hptiop_get_channel_info(hba, i, &chan_info) == 0) {
-			if (hpt_id_valid(chan_info.devices[0]))
-				hptiop_dump_devinfo(hba, &info,
-						chan_info.devices[0], 0);
-			if (hpt_id_valid(chan_info.devices[1]))
-				hptiop_dump_devinfo(hba, &info,
-						chan_info.devices[1], 0);
-		}
-	}
-
-	ndev = hptiop_get_logical_devices(hba, ids,
-					sizeof(ids) / sizeof(ids[0]));
-
-	/*
-	 * if hptiop_get_logical_devices fails, ndev==-1 and it just
-	 * output nothing here
-	 */
-	for (j = 0; j < ndev; j++)
-		hptiop_dump_devinfo(hba, &info, ids[j], 0);
-
-	if (ppos)
-		*ppos += info.buffillen;
-
-	return info.buffillen;
-}
-
-static int hptiop_cdev_ioctl(struct inode *inode,  struct file *file,
-					unsigned int cmd, unsigned long arg)
-{
-	struct hptiop_hba *hba = file->private_data;
-	struct hpt_ioctl_u ioctl_u;
-	struct hpt_ioctl_k ioctl_k;
-	u32 bytes_returned;
-	int err = -EINVAL;
-
-	if (copy_from_user(&ioctl_u,
-		(void __user *)arg, sizeof(struct hpt_ioctl_u)))
-		return -EINVAL;
-
-	if (ioctl_u.magic != HPT_IOCTL_MAGIC)
-		return -EINVAL;
-
-	ioctl_k.ioctl_code = ioctl_u.ioctl_code;
-	ioctl_k.inbuf = NULL;
-	ioctl_k.inbuf_size = ioctl_u.inbuf_size;
-	ioctl_k.outbuf = NULL;
-	ioctl_k.outbuf_size = ioctl_u.outbuf_size;
-	ioctl_k.hba = hba;
-	ioctl_k.bytes_returned = &bytes_returned;
-
-	/* verify user buffer */
-	if ((ioctl_k.inbuf_size && !access_ok(VERIFY_READ,
-			ioctl_u.inbuf, ioctl_k.inbuf_size)) ||
-		(ioctl_k.outbuf_size && !access_ok(VERIFY_WRITE,
-			ioctl_u.outbuf, ioctl_k.outbuf_size)) ||
-		(ioctl_u.bytes_returned && !access_ok(VERIFY_WRITE,
-			ioctl_u.bytes_returned, sizeof(u32))) ||
-		ioctl_k.inbuf_size + ioctl_k.outbuf_size > 0x10000) {
-
-		dprintk("scsi%d: got bad user address\n", hba->host->host_no);
-		return -EINVAL;
-	}
-
-	/* map buffer to kernel. */
-	if (ioctl_k.inbuf_size) {
-		ioctl_k.inbuf = kmalloc(ioctl_k.inbuf_size, GFP_KERNEL);
-		if (!ioctl_k.inbuf) {
-			dprintk("scsi%d: fail to alloc inbuf\n",
-					hba->host->host_no);
-			err = -ENOMEM;
-			goto err_exit;
-		}
-
-		if (copy_from_user(ioctl_k.inbuf,
-				ioctl_u.inbuf, ioctl_k.inbuf_size)) {
-			goto err_exit;
-		}
-	}
-
-	if (ioctl_k.outbuf_size) {
-		ioctl_k.outbuf = kmalloc(ioctl_k.outbuf_size, GFP_KERNEL);
-		if (!ioctl_k.outbuf) {
-			dprintk("scsi%d: fail to alloc outbuf\n",
-					hba->host->host_no);
-			err = -ENOMEM;
-			goto err_exit;
-		}
-	}
-
-	hptiop_do_ioctl(&ioctl_k);
-
-	if (ioctl_k.result == HPT_IOCTL_RESULT_OK) {
-		if (ioctl_k.outbuf_size &&
-			copy_to_user(ioctl_u.outbuf,
-				ioctl_k.outbuf, ioctl_k.outbuf_size))
-			goto err_exit;
-
-		if (ioctl_u.bytes_returned &&
-			copy_to_user(ioctl_u.bytes_returned,
-				&bytes_returned, sizeof(u32)))
-			goto err_exit;
-
-		err = 0;
-	}
-
-err_exit:
-	kfree(ioctl_k.inbuf);
-	kfree(ioctl_k.outbuf);
-
-	return err;
-}
-
-static int hptiop_cdev_open(struct inode *inode, struct file *file)
-{
-	struct hptiop_hba *hba;
-	unsigned i = 0, minor = iminor(inode);
-	int ret = -ENODEV;
-
-	spin_lock(&hptiop_hba_list_lock);
-	list_for_each_entry(hba, &hptiop_hba_list, link) {
-		if (i == minor) {
-			file->private_data = hba;
-			ret = 0;
-			goto out;
-		}
-		i++;
-	}
-
-out:
-	spin_unlock(&hptiop_hba_list_lock);
-	return ret;
-}
-
-static struct file_operations hptiop_cdev_fops = {
-	.owner = THIS_MODULE,
-	.read  = hptiop_cdev_read,
-	.ioctl = hptiop_cdev_ioctl,
-	.open  = hptiop_cdev_open,
-};
-
 static ssize_t hptiop_show_fw_version(struct class_device *class_dev, char *buf)
 {
 	struct Scsi_Host *host = class_to_shost(class_dev);
@@ -1296,19 +771,13 @@ static int __devinit hptiop_probe(struct pci_dev *pcidev,
 		goto unmap_pci_bar;
 	}
 
-	if (scsi_add_host(host, &pcidev->dev)) {
-		printk(KERN_ERR "scsi%d: scsi_add_host failed\n",
-					hba->host->host_no);
-		goto unmap_pci_bar;
-	}
-
 	pci_set_drvdata(pcidev, host);
 
 	if (request_irq(pcidev->irq, hptiop_intr, IRQF_SHARED,
 					driver_name, hba)) {
 		printk(KERN_ERR "scsi%d: request irq %d failed\n",
 					hba->host->host_no, pcidev->irq);
-		goto remove_scsi_host;
+		goto unmap_pci_bar;
 	}
 
 	/* Allocate request mem */
@@ -1355,9 +824,12 @@ static int __devinit hptiop_probe(struct pci_dev *pcidev,
 	if (hptiop_initialize_iop(hba))
 		goto free_request_mem;
 
-	spin_lock(&hptiop_hba_list_lock);
-	list_add_tail(&hba->link, &hptiop_hba_list);
-	spin_unlock(&hptiop_hba_list_lock);
+	if (scsi_add_host(host, &pcidev->dev)) {
+		printk(KERN_ERR "scsi%d: scsi_add_host failed\n",
+					hba->host->host_no);
+		goto free_request_mem;
+	}
+
 
 	scsi_scan_host(host);
 
@@ -1372,9 +844,6 @@ free_request_mem:
 free_request_irq:
 	free_irq(hba->pcidev->irq, hba);
 
-remove_scsi_host:
-	scsi_remove_host(host);
-
 unmap_pci_bar:
 	iounmap(hba->iop);
 
@@ -1422,10 +891,6 @@ static void hptiop_remove(struct pci_dev *pcidev)
 
 	scsi_remove_host(host);
 
-	spin_lock(&hptiop_hba_list_lock);
-	list_del_init(&hba->link);
-	spin_unlock(&hptiop_hba_list_lock);
-
 	hptiop_shutdown(pcidev);
 
 	free_irq(hba->pcidev->irq, hba);
@@ -1462,27 +927,12 @@ static struct pci_driver hptiop_pci_driver = {
 
 static int __init hptiop_module_init(void)
 {
-	int error;
-
 	printk(KERN_INFO "%s %s\n", driver_name_long, driver_ver);
-
-	error = pci_register_driver(&hptiop_pci_driver);
-	if (error < 0)
-		return error;
-
-	hptiop_cdev_major = register_chrdev(0, "hptiop", &hptiop_cdev_fops);
-	if (hptiop_cdev_major < 0) {
-		printk(KERN_WARNING "unable to register hptiop device.\n");
-		return hptiop_cdev_major;
-	}
-
-	return 0;
+	return pci_register_driver(&hptiop_pci_driver);
 }
 
 static void __exit hptiop_module_exit(void)
 {
-	dprintk("hptiop_module_exit\n");
-	unregister_chrdev(hptiop_cdev_major, "hptiop");
 	pci_unregister_driver(&hptiop_pci_driver);
 }
 
-- 
cgit v1.2.3-70-g09d2


From 33ccf8d1080bdccb4751a92f6da361a6e01b7cc0 Mon Sep 17 00:00:00 2001
From: James Smart <James.Smart@Emulex.Com>
Date: Thu, 17 Aug 2006 11:57:58 -0400
Subject: [SCSI] lpfc 8.1.9 : Misc Bug Fixes

Misc Bug Fixes:
- Cap MBX_DOWN_LINK command timeout to 60 seconds
- Fix double free of ndlp object
- Don't free mbox structures on error. The completion handlers expect to do so.
- Clear host attention work items when going offline
- Fixed discovery issues in multi-initiator environments.

Signed-off-by: James Smart <James.Smart@emulex.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
---
 drivers/scsi/lpfc/lpfc_attr.c      |  2 +-
 drivers/scsi/lpfc/lpfc_els.c       | 15 ++++++++++++---
 drivers/scsi/lpfc/lpfc_hbadisc.c   |  3 +++
 drivers/scsi/lpfc/lpfc_init.c      |  1 +
 drivers/scsi/lpfc/lpfc_nportdisc.c | 22 +++++++++++++++++++++-
 5 files changed, 38 insertions(+), 5 deletions(-)

(limited to 'drivers/scsi')

diff --git a/drivers/scsi/lpfc/lpfc_attr.c b/drivers/scsi/lpfc/lpfc_attr.c
index 76f8bd53e23..d384c16f4a8 100644
--- a/drivers/scsi/lpfc/lpfc_attr.c
+++ b/drivers/scsi/lpfc/lpfc_attr.c
@@ -222,7 +222,7 @@ lpfc_issue_lip(struct Scsi_Host *host)
 	pmboxq->mb.mbxCommand = MBX_DOWN_LINK;
 	pmboxq->mb.mbxOwner = OWN_HOST;
 
-	mbxstatus = lpfc_sli_issue_mbox_wait(phba, pmboxq, phba->fc_ratov * 2);
+	mbxstatus = lpfc_sli_issue_mbox_wait(phba, pmboxq, LPFC_MBOX_TMO * 2);
 
 	if ((mbxstatus == MBX_SUCCESS) && (pmboxq->mb.mbxStatus == 0)) {
 		memset((void *)pmboxq, 0, sizeof (LPFC_MBOXQ_t));
diff --git a/drivers/scsi/lpfc/lpfc_els.c b/drivers/scsi/lpfc/lpfc_els.c
index 60f5cca0abe..3567de61316 100644
--- a/drivers/scsi/lpfc/lpfc_els.c
+++ b/drivers/scsi/lpfc/lpfc_els.c
@@ -1848,9 +1848,12 @@ static void
 lpfc_cmpl_els_acc(struct lpfc_hba * phba, struct lpfc_iocbq * cmdiocb,
 		  struct lpfc_iocbq * rspiocb)
 {
+	IOCB_t *irsp;
 	struct lpfc_nodelist *ndlp;
 	LPFC_MBOXQ_t *mbox = NULL;
 
+	irsp = &rspiocb->iocb;
+
 	ndlp = (struct lpfc_nodelist *) cmdiocb->context1;
 	if (cmdiocb->context_un.mbox)
 		mbox = cmdiocb->context_un.mbox;
@@ -1893,9 +1896,15 @@ lpfc_cmpl_els_acc(struct lpfc_hba * phba, struct lpfc_iocbq * cmdiocb,
 			mempool_free( mbox, phba->mbox_mem_pool);
 		} else {
 			mempool_free( mbox, phba->mbox_mem_pool);
-			if (ndlp->nlp_flag & NLP_ACC_REGLOGIN) {
-				lpfc_nlp_list(phba, ndlp, NLP_NO_LIST);
-				ndlp = NULL;
+			/* Do not call NO_LIST for lpfc_els_abort'ed ELS cmds */
+			if (!((irsp->ulpStatus == IOSTAT_LOCAL_REJECT) &&
+			      ((irsp->un.ulpWord[4] == IOERR_SLI_ABORTED) ||
+			       (irsp->un.ulpWord[4] == IOERR_LINK_DOWN) ||
+			       (irsp->un.ulpWord[4] == IOERR_SLI_DOWN)))) {
+				if (ndlp->nlp_flag & NLP_ACC_REGLOGIN) {
+					lpfc_nlp_list(phba, ndlp, NLP_NO_LIST);
+					ndlp = NULL;
+				}
 			}
 		}
 	}
diff --git a/drivers/scsi/lpfc/lpfc_hbadisc.c b/drivers/scsi/lpfc/lpfc_hbadisc.c
index 1c3f2689155..b2f1552f184 100644
--- a/drivers/scsi/lpfc/lpfc_hbadisc.c
+++ b/drivers/scsi/lpfc/lpfc_hbadisc.c
@@ -1557,6 +1557,8 @@ lpfc_freenode(struct lpfc_hba * phba, struct lpfc_nodelist * ndlp)
 			mb->mbox_cmpl = lpfc_sli_def_mbox_cmpl;
 		}
 	}
+
+	spin_lock_irq(phba->host->host_lock);
 	list_for_each_entry_safe(mb, nextmb, &phba->sli.mboxq, list) {
 		if ((mb->mb.mbxCommand == MBX_REG_LOGIN64) &&
 		   (ndlp == (struct lpfc_nodelist *) mb->context2)) {
@@ -1569,6 +1571,7 @@ lpfc_freenode(struct lpfc_hba * phba, struct lpfc_nodelist * ndlp)
 			mempool_free(mb, phba->mbox_mem_pool);
 		}
 	}
+	spin_unlock_irq(phba->host->host_lock);
 
 	lpfc_els_abort(phba,ndlp,0);
 	spin_lock_irq(phba->host->host_lock);
diff --git a/drivers/scsi/lpfc/lpfc_init.c b/drivers/scsi/lpfc/lpfc_init.c
index 16dc8c82b5c..f6948ffe689 100644
--- a/drivers/scsi/lpfc/lpfc_init.c
+++ b/drivers/scsi/lpfc/lpfc_init.c
@@ -1379,6 +1379,7 @@ lpfc_offline(struct lpfc_hba * phba)
 	/* stop all timers associated with this hba */
 	lpfc_stop_timer(phba);
 	phba->work_hba_events = 0;
+	phba->work_ha = 0;
 
 	lpfc_printf_log(phba,
 		       KERN_WARNING,
diff --git a/drivers/scsi/lpfc/lpfc_nportdisc.c b/drivers/scsi/lpfc/lpfc_nportdisc.c
index b38021a32c9..20449a8dd53 100644
--- a/drivers/scsi/lpfc/lpfc_nportdisc.c
+++ b/drivers/scsi/lpfc/lpfc_nportdisc.c
@@ -393,6 +393,20 @@ lpfc_rcv_plogi(struct lpfc_hba * phba,
 	mbox->context2  = ndlp;
 	ndlp->nlp_flag |= (NLP_ACC_REGLOGIN | NLP_RCV_PLOGI);
 
+	/*
+	 * If there is an outstanding PLOGI issued, abort it before
+	 * sending ACC rsp for received PLOGI. If pending plogi
+	 * is not canceled here, the plogi will be rejected by
+	 * remote port and will be retried. On a configuration with
+	 * single discovery thread, this will cause a huge delay in
+	 * discovery. Also this will cause multiple state machines
+	 * running in parallel for this node.
+	 */
+	if (ndlp->nlp_state == NLP_STE_PLOGI_ISSUE) {
+		/* software abort outstanding PLOGI */
+		lpfc_els_abort(phba, ndlp, 1);
+	}
+
 	lpfc_els_rsp_acc(phba, ELS_CMD_PLOGI, cmdiocb, ndlp, mbox, 0);
 	return 1;
 
@@ -1601,7 +1615,13 @@ lpfc_rcv_padisc_npr_node(struct lpfc_hba * phba,
 
 	lpfc_rcv_padisc(phba, ndlp, cmdiocb);
 
-	if (!(ndlp->nlp_flag & NLP_DELAY_TMO)) {
+	/*
+	 * Do not start discovery if discovery is about to start
+	 * or discovery in progress for this node. Starting discovery
+	 * here will affect the counting of discovery threads.
+	 */
+	if ((!(ndlp->nlp_flag & NLP_DELAY_TMO)) &&
+		(ndlp->nlp_flag & NLP_NPR_2B_DISC)){
 		if (ndlp->nlp_flag & NLP_NPR_ADISC) {
 			ndlp->nlp_prev_state = NLP_STE_NPR_NODE;
 			ndlp->nlp_state = NLP_STE_ADISC_ISSUE;
-- 
cgit v1.2.3-70-g09d2


From a90f56847e8df9034c1c05d1157e1b0cd96987fb Mon Sep 17 00:00:00 2001
From: James Smart <James.Smart@Emulex.Com>
Date: Thu, 17 Aug 2006 11:58:04 -0400
Subject: [SCSI] lpfc 8.1.9 : Stall eh handlers if resetting while rport
 blocked

Stall error handler if attempting resets/aborts while an rport is blocked.
This avoids device offline scenarios due to errors in the error handler.

Background:
  Although the transport is using the scsi_timed_out functionality to
  restart the timeout if the rport is blocked, if the timeout has already
  fired before the block occurs, the eh handler still runs and can take
  the device offline. Ultimately, this window cannot be resolved without
  significant work in the error handler thread. Christoph noted the first
  level of these issues when he noted the poor error response handling
  by the error thread.

  We found, under heavy load and error testing, that time window from when
  the scsi_times_out() adds the io to the queue to when the scsi_error_handler
  gets around to servicing it, can be in the several seconds range. In most
  cases, these test conditions are highly unusual, but possible.
  As a result, we're stalling the error handler in this race window so that
  we can avoid the device_offline transitions.

Signed-off-by: James Smart <James.Smart@emulex.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
---
 drivers/scsi/lpfc/lpfc_scsi.c | 19 +++++++++++++++++++
 1 file changed, 19 insertions(+)

(limited to 'drivers/scsi')

diff --git a/drivers/scsi/lpfc/lpfc_scsi.c b/drivers/scsi/lpfc/lpfc_scsi.c
index 0811c824e0e..a8816a8738f 100644
--- a/drivers/scsi/lpfc/lpfc_scsi.c
+++ b/drivers/scsi/lpfc/lpfc_scsi.c
@@ -21,6 +21,7 @@
 
 #include <linux/pci.h>
 #include <linux/interrupt.h>
+#include <linux/delay.h>
 
 #include <scsi/scsi.h>
 #include <scsi/scsi_device.h>
@@ -841,6 +842,21 @@ lpfc_queuecommand(struct scsi_cmnd *cmnd, void (*done) (struct scsi_cmnd *))
 	return 0;
 }
 
+static void
+lpfc_block_error_handler(struct scsi_cmnd *cmnd)
+{
+	struct Scsi_Host *shost = cmnd->device->host;
+	struct fc_rport *rport = starget_to_rport(scsi_target(cmnd->device));
+
+	spin_lock_irq(shost->host_lock);
+	while (rport->port_state == FC_PORTSTATE_BLOCKED) {
+		spin_unlock_irq(shost->host_lock);
+		msleep(1000);
+		spin_lock_irq(shost->host_lock);
+	}
+	spin_unlock_irq(shost->host_lock);
+	return;
+}
 
 static int
 lpfc_abort_handler(struct scsi_cmnd *cmnd)
@@ -855,6 +871,7 @@ lpfc_abort_handler(struct scsi_cmnd *cmnd)
 	unsigned int loop_count = 0;
 	int ret = SUCCESS;
 
+	lpfc_block_error_handler(cmnd);
 	spin_lock_irq(shost->host_lock);
 
 	lpfc_cmd = (struct lpfc_scsi_buf *)cmnd->host_scribble;
@@ -957,6 +974,7 @@ lpfc_reset_lun_handler(struct scsi_cmnd *cmnd)
 	int ret = FAILED;
 	int cnt, loopcnt;
 
+	lpfc_block_error_handler(cmnd);
 	spin_lock_irq(shost->host_lock);
 	/*
 	 * If target is not in a MAPPED state, delay the reset until
@@ -1073,6 +1091,7 @@ lpfc_reset_bus_handler(struct scsi_cmnd *cmnd)
 	int cnt, loopcnt;
 	struct lpfc_scsi_buf * lpfc_cmd;
 
+	lpfc_block_error_handler(cmnd);
 	spin_lock_irq(shost->host_lock);
 
 	lpfc_cmd = lpfc_get_scsi_buf(phba);
-- 
cgit v1.2.3-70-g09d2


From 48e2691f9c3bd6719e773f0b883449f4cef39585 Mon Sep 17 00:00:00 2001
From: James Smart <James.Smart@Emulex.Com>
Date: Thu, 17 Aug 2006 11:58:11 -0400
Subject: [SCSI] lpfc 8.1.9 : Change version number to 8.1.9

Change version number to 8.1.9

Signed-off-by: James Smart <James.Smart@emulex.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
---
 drivers/scsi/lpfc/lpfc_version.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'drivers/scsi')

diff --git a/drivers/scsi/lpfc/lpfc_version.h b/drivers/scsi/lpfc/lpfc_version.h
index c7963f91d0a..c7091ea29f3 100644
--- a/drivers/scsi/lpfc/lpfc_version.h
+++ b/drivers/scsi/lpfc/lpfc_version.h
@@ -18,7 +18,7 @@
  * included with this package.                                     *
  *******************************************************************/
 
-#define LPFC_DRIVER_VERSION "8.1.8"
+#define LPFC_DRIVER_VERSION "8.1.9"
 
 #define LPFC_DRIVER_NAME "lpfc"
 
-- 
cgit v1.2.3-70-g09d2


From 25848c4e502ec2bb94ee1f3c82709311059d0857 Mon Sep 17 00:00:00 2001
From: "David S. Miller" <davem@sunset.davemloft.net>
Date: Wed, 23 Aug 2006 15:33:07 -0700
Subject: [SCSI] esp: Fix build on SUN4.

Noted by Alexey Dobriyan.

Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/scsi/esp.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

(limited to 'drivers/scsi')

diff --git a/drivers/scsi/esp.c b/drivers/scsi/esp.c
index 98bd22714d0..5630868c1b2 100644
--- a/drivers/scsi/esp.c
+++ b/drivers/scsi/esp.c
@@ -1146,7 +1146,7 @@ static struct sbus_dev sun4_esp_dev;
 static int __init esp_sun4_probe(struct scsi_host_template *tpnt)
 {
 	if (sun4_esp_physaddr) {
-		memset(&sun4_esp_dev, 0, sizeof(esp_dev));
+		memset(&sun4_esp_dev, 0, sizeof(sun4_esp_dev));
 		sun4_esp_dev.reg_addrs[0].phys_addr = sun4_esp_physaddr;
 		sun4_esp_dev.irqs[0] = 4;
 		sun4_esp_dev.resource[0].start = sun4_esp_physaddr;
@@ -1162,6 +1162,7 @@ static int __init esp_sun4_probe(struct scsi_host_template *tpnt)
 
 static int __devexit esp_sun4_remove(void)
 {
+	struct of_device *dev = &sun4_esp_dev.ofdev;
 	struct esp *esp = dev_get_drvdata(&dev->dev);
 
 	return esp_remove_common(esp);
-- 
cgit v1.2.3-70-g09d2


From b2155d0417df9f2b4c0d396b6530b864d9f08623 Mon Sep 17 00:00:00 2001
From: Douglas Gilbert <dougg@torque.net>
Date: Sat, 19 Aug 2006 00:11:34 -0400
Subject: [SCSI] sg: fix incorrect page problem

There's a problem where sg is executing a ->nopage operation on a
compound page, it actually calls get_page() on the first page in the
compound rather than the page which is being mapped.  The fix is to
select the correct page by indexing into the compound.

Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
---
 drivers/scsi/sg.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

(limited to 'drivers/scsi')

diff --git a/drivers/scsi/sg.c b/drivers/scsi/sg.c
index 65eef33846b..34f9343ed0a 100644
--- a/drivers/scsi/sg.c
+++ b/drivers/scsi/sg.c
@@ -18,8 +18,8 @@
  *
  */
 
-static int sg_version_num = 30533;	/* 2 digits for each component */
-#define SG_VERSION_STR "3.5.33"
+static int sg_version_num = 30534;	/* 2 digits for each component */
+#define SG_VERSION_STR "3.5.34"
 
 /*
  *  D. P. Gilbert (dgilbert@interlog.com, dougg@triode.net.au), notes:
@@ -60,7 +60,7 @@ static int sg_version_num = 30533;	/* 2 digits for each component */
 
 #ifdef CONFIG_SCSI_PROC_FS
 #include <linux/proc_fs.h>
-static char *sg_version_date = "20050908";
+static char *sg_version_date = "20060818";
 
 static int sg_proc_init(void);
 static void sg_proc_cleanup(void);
@@ -1164,7 +1164,7 @@ sg_vma_nopage(struct vm_area_struct *vma, unsigned long addr, int *type)
 		len = vma->vm_end - sa;
 		len = (len < sg->length) ? len : sg->length;
 		if (offset < len) {
-			page = sg->page;
+			page = virt_to_page(page_address(sg->page) + offset);
 			get_page(page);	/* increment page count */
 			break;
 		}
-- 
cgit v1.2.3-70-g09d2


From 9c06938aa458843fb71fa35371f23a3b89317252 Mon Sep 17 00:00:00 2001
From: Andrew Vasquez <andrew.vasquez@qlogic.com>
Date: Wed, 23 Aug 2006 14:54:54 -0700
Subject: [SCSI] qla2xxx: Correct PLOGI retry logic.

Original code attempts to retry PLOGIs to fcports that are
FCP_TARGETs only.  If the driver never performed a successful
PLOGI/PRLI, the port-type would never be assigned, and the
relogin logic would silently drop the request (and thus the port
would not be recognized and registered).

The fix is relatively straightforward, drop the FCP_TARGET-only
check.

Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
---
 drivers/scsi/qla2xxx/qla_os.c | 3 ---
 1 file changed, 3 deletions(-)

(limited to 'drivers/scsi')

diff --git a/drivers/scsi/qla2xxx/qla_os.c b/drivers/scsi/qla2xxx/qla_os.c
index 1e2b95bac83..65cbe2f5eea 100644
--- a/drivers/scsi/qla2xxx/qla_os.c
+++ b/drivers/scsi/qla2xxx/qla_os.c
@@ -2238,9 +2238,6 @@ qla2x00_do_dpc(void *data)
 
 			next_loopid = 0;
 			list_for_each_entry(fcport, &ha->fcports, list) {
-				if (fcport->port_type != FCT_TARGET)
-					continue;
-
 				/*
 				 * If the port is not ONLINE then try to login
 				 * to it if we haven't run out of retries.
-- 
cgit v1.2.3-70-g09d2


From 476e8978d9ccacfc911bd42e083dd784ad1465b1 Mon Sep 17 00:00:00 2001
From: Andrew Vasquez <andrew.vasquez@qlogic.com>
Date: Wed, 23 Aug 2006 14:54:55 -0700
Subject: [SCSI] qla2xxx: Properly re-enable EFT support after an ISP abort.

Software must explicitely re-enable extended firmware tracing
after any ISP abort condition.

Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
---
 drivers/scsi/qla2xxx/qla_init.c | 11 +++++++++++
 1 file changed, 11 insertions(+)

(limited to 'drivers/scsi')

diff --git a/drivers/scsi/qla2xxx/qla_init.c b/drivers/scsi/qla2xxx/qla_init.c
index 9758dba9554..859649160ca 100644
--- a/drivers/scsi/qla2xxx/qla_init.c
+++ b/drivers/scsi/qla2xxx/qla_init.c
@@ -3063,6 +3063,7 @@ qla2x00_update_fcports(scsi_qla_host_t *ha)
 int
 qla2x00_abort_isp(scsi_qla_host_t *ha)
 {
+	int rval;
 	unsigned long flags = 0;
 	uint16_t       cnt;
 	srb_t          *sp;
@@ -3119,6 +3120,16 @@ qla2x00_abort_isp(scsi_qla_host_t *ha)
 
 			ha->isp_abort_cnt = 0;
 			clear_bit(ISP_ABORT_RETRY, &ha->dpc_flags);
+
+			if (ha->eft) {
+				rval = qla2x00_trace_control(ha, TC_ENABLE,
+				    ha->eft_dma, EFT_NUM_BUFFERS);
+				if (rval) {
+					qla_printk(KERN_WARNING, ha,
+					    "Unable to reinitialize EFT "
+					    "(%d).\n", rval);
+				}
+			}
 		} else {	/* failed the ISP abort */
 			ha->flags.online = 1;
 			if (test_bit(ISP_ABORT_RETRY, &ha->dpc_flags)) {
-- 
cgit v1.2.3-70-g09d2


From 15a3758dc9e1c9d862e46acdf607de70c302fa6a Mon Sep 17 00:00:00 2001
From: Andrew Vasquez <andrew.vasquez@qlogic.com>
Date: Wed, 23 Aug 2006 14:54:56 -0700
Subject: [SCSI] qla2xxx: Update version number to 8.01.07-k1.

Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
---
 drivers/scsi/qla2xxx/qla_version.h | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

(limited to 'drivers/scsi')

diff --git a/drivers/scsi/qla2xxx/qla_version.h b/drivers/scsi/qla2xxx/qla_version.h
index f5826bf04a2..971259032ef 100644
--- a/drivers/scsi/qla2xxx/qla_version.h
+++ b/drivers/scsi/qla2xxx/qla_version.h
@@ -7,9 +7,9 @@
 /*
  * Driver version
  */
-#define QLA2XXX_VERSION      "8.01.05-k4"
+#define QLA2XXX_VERSION      "8.01.07-k1"
 
 #define QLA_DRIVER_MAJOR_VER	8
 #define QLA_DRIVER_MINOR_VER	1
-#define QLA_DRIVER_PATCH_VER	5
+#define QLA_DRIVER_PATCH_VER	7
 #define QLA_DRIVER_BETA_VER	0
-- 
cgit v1.2.3-70-g09d2


From 0db99e3359234be181590463184b9959059a9ea9 Mon Sep 17 00:00:00 2001
From: Mike Christie <michaelc@cs.wisc.edu>
Date: Sat, 26 Aug 2006 03:00:22 -0400
Subject: [SCSI] fix scsi_send_eh_cmnd regression

The callers of scsi_send_eh_cmnd are setting the cmnd buffer,
and then scsi_send_eh_cmnd is copying that updated buffer to
the old_cmnd variable. Then after the command runs, we end up
copying that old_cmnd var which has the new cmnd to the scsi
command buffer. When this command gets recent, all types of fun
things happen like getting TUR or START_STOP commands with
data and scatterlists.

This patch made against scsi-rc-fixes, has the callers of
scsi_send_eh_cmnd pass in the command so scsi_send_eh_cmnd
can do the right thing. This should go into 2.6.18 since this
fixes a regression added when we removed some of the scsi_cmnd
fields and replaced them with local variables.

Signed-off-by: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
---
 drivers/scsi/scsi_error.c | 18 +++++++++---------
 1 file changed, 9 insertions(+), 9 deletions(-)

(limited to 'drivers/scsi')

diff --git a/drivers/scsi/scsi_error.c b/drivers/scsi/scsi_error.c
index 6a5b731bd5b..a8ed5a22009 100644
--- a/drivers/scsi/scsi_error.c
+++ b/drivers/scsi/scsi_error.c
@@ -460,7 +460,8 @@ static void scsi_eh_done(struct scsi_cmnd *scmd)
  * Return value:
  *    SUCCESS or FAILED or NEEDS_RETRY
  **/
-static int scsi_send_eh_cmnd(struct scsi_cmnd *scmd, int timeout, int copy_sense)
+static int scsi_send_eh_cmnd(struct scsi_cmnd *scmd, unsigned char *cmnd,
+			     int cmnd_size, int timeout, int copy_sense)
 {
 	struct scsi_device *sdev = scmd->device;
 	struct Scsi_Host *shost = sdev->host;
@@ -490,6 +491,9 @@ static int scsi_send_eh_cmnd(struct scsi_cmnd *scmd, int timeout, int copy_sense
 	old_cmd_len = scmd->cmd_len;
 	old_use_sg = scmd->use_sg;
 
+	memset(scmd->cmnd, 0, sizeof(scmd->cmnd));
+	memcpy(scmd->cmnd, cmnd, cmnd_size);
+
 	if (copy_sense) {
 		int gfp_mask = GFP_ATOMIC;
 
@@ -610,8 +614,7 @@ static int scsi_request_sense(struct scsi_cmnd *scmd)
 	static unsigned char generic_sense[6] =
 		{REQUEST_SENSE, 0, 0, 0, 252, 0};
 
-	memcpy(scmd->cmnd, generic_sense, sizeof(generic_sense));
-	return scsi_send_eh_cmnd(scmd, SENSE_TIMEOUT, 1);
+	return scsi_send_eh_cmnd(scmd, generic_sense, 6, SENSE_TIMEOUT, 1);
 }
 
 /**
@@ -736,10 +739,7 @@ static int scsi_eh_tur(struct scsi_cmnd *scmd)
 	int retry_cnt = 1, rtn;
 
 retry_tur:
-	memcpy(scmd->cmnd, tur_command, sizeof(tur_command));
-
-
-	rtn = scsi_send_eh_cmnd(scmd, SENSE_TIMEOUT, 0);
+	rtn = scsi_send_eh_cmnd(scmd, tur_command, 6, SENSE_TIMEOUT, 0);
 
 	SCSI_LOG_ERROR_RECOVERY(3, printk("%s: scmd %p rtn %x\n",
 		__FUNCTION__, scmd, rtn));
@@ -839,8 +839,8 @@ static int scsi_eh_try_stu(struct scsi_cmnd *scmd)
 	if (scmd->device->allow_restart) {
 		int rtn;
 
-		memcpy(scmd->cmnd, stu_command, sizeof(stu_command));
-		rtn = scsi_send_eh_cmnd(scmd, START_UNIT_TIMEOUT, 0);
+		rtn = scsi_send_eh_cmnd(scmd, stu_command, 6,
+					START_UNIT_TIMEOUT, 0);
 		if (rtn == SUCCESS)
 			return 0;
 	}
-- 
cgit v1.2.3-70-g09d2


From 36e8e5783297fbb83bdebe7e245ef659958f23cb Mon Sep 17 00:00:00 2001
From: Ingo Molnar <mingo@elte.hu>
Date: Sun, 27 Aug 2006 01:23:56 -0700
Subject: [PATCH] lockdep: annotate idescsi_pc_intr()

idescsi_pc_intr() uses local_irq_enable() in IRQ context: annotate it.

(this has no effect on kernels with lockdep disabled.  On kernels with lockdep
enabled this means that we wont actually disable interrupts, and the warning
message will go away as well.)

Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
---
 drivers/scsi/ide-scsi.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'drivers/scsi')

diff --git a/drivers/scsi/ide-scsi.c b/drivers/scsi/ide-scsi.c
index f7b5d7372d2..94d1de55607 100644
--- a/drivers/scsi/ide-scsi.c
+++ b/drivers/scsi/ide-scsi.c
@@ -517,7 +517,7 @@ static ide_startstop_t idescsi_pc_intr (ide_drive_t *drive)
 		/* No more interrupts */
 		if (test_bit(IDESCSI_LOG_CMD, &scsi->log))
 			printk (KERN_INFO "Packet command completed, %d bytes transferred\n", pc->actually_transferred);
-		local_irq_enable();
+		local_irq_enable_in_hardirq();
 		if (status.b.check)
 			rq->errors++;
 		idescsi_end_request (drive, 1, 0);
-- 
cgit v1.2.3-70-g09d2