From fd401aee6273e869e2711de498e28f5208184797 Mon Sep 17 00:00:00 2001 From: Russell King Date: Fri, 10 Feb 2006 21:50:43 +0000 Subject: [SERIAL] Remove incorrect code from ioc4 serial driver Serial drivers in general should not write uart_info->flags - they're private to serial_core. Serial drivers have no need to fiddle with tty->alt_speed, nor manipulate TTY_IO_ERROR in tty->flags. Fix the ioc4 serial driver for both these points by simply removing the offending code. Acked-by: pfg@sgi.com Signed-off-by: Russell King --- drivers/serial/ioc4_serial.c | 14 -------------- 1 file changed, 14 deletions(-) (limited to 'drivers/serial/ioc4_serial.c') diff --git a/drivers/serial/ioc4_serial.c b/drivers/serial/ioc4_serial.c index 1d85533d46d..f3763d2ccb8 100644 --- a/drivers/serial/ioc4_serial.c +++ b/drivers/serial/ioc4_serial.c @@ -1717,11 +1717,9 @@ ioc4_change_speed(struct uart_port *the_port, } if (cflag & CRTSCTS) { - info->flags |= ASYNC_CTS_FLOW; port->ip_sscr |= IOC4_SSCR_HFC_EN; } else { - info->flags &= ~ASYNC_CTS_FLOW; port->ip_sscr &= ~IOC4_SSCR_HFC_EN; } writel(port->ip_sscr, &port->ip_serial_regs->sscr); @@ -1760,18 +1758,6 @@ static inline int ic4_startup_local(struct uart_port *the_port) info = the_port->info; - if (info->tty) { - set_bit(TTY_IO_ERROR, &info->tty->flags); - clear_bit(TTY_IO_ERROR, &info->tty->flags); - if ((info->flags & ASYNC_SPD_MASK) == ASYNC_SPD_HI) - info->tty->alt_speed = 57600; - if ((info->flags & ASYNC_SPD_MASK) == ASYNC_SPD_VHI) - info->tty->alt_speed = 115200; - if ((info->flags & ASYNC_SPD_MASK) == ASYNC_SPD_SHI) - info->tty->alt_speed = 230400; - if ((info->flags & ASYNC_SPD_MASK) == ASYNC_SPD_WARP) - info->tty->alt_speed = 460800; - } local_open(port); /* set the speed of the serial port */ -- cgit v1.2.3-70-g09d2