From f14362d1fe81cece6f1d78483e5bbfcf8cc497bf Mon Sep 17 00:00:00 2001 From: Ian Munsie Date: Fri, 1 Oct 2010 17:06:07 +1000 Subject: powerpc, of_serial: Endianness issues setting up the serial ports The speed and clock of the serial ports is retrieved from the device tree in both the PowerPC legacy serial code and the Open Firmware serial driver, therefore they need to handle the fact that the device tree is always big endian, while the CPU may not be. Also fix other device tree references in the legacy serial code. Signed-off-by: Ian Munsie Signed-off-by: Grant Likely --- drivers/serial/of_serial.c | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) (limited to 'drivers/serial/of_serial.c') diff --git a/drivers/serial/of_serial.c b/drivers/serial/of_serial.c index 2af8fd11312..17849dcb9ad 100644 --- a/drivers/serial/of_serial.c +++ b/drivers/serial/of_serial.c @@ -31,8 +31,8 @@ static int __devinit of_platform_serial_setup(struct platform_device *ofdev, { struct resource resource; struct device_node *np = ofdev->dev.of_node; - const unsigned int *clk, *spd; - const u32 *prop; + const __be32 *clk, *spd; + const __be32 *prop; int ret, prop_size; memset(port, 0, sizeof *port); @@ -55,23 +55,23 @@ static int __devinit of_platform_serial_setup(struct platform_device *ofdev, /* Check for shifted address mapping */ prop = of_get_property(np, "reg-offset", &prop_size); if (prop && (prop_size == sizeof(u32))) - port->mapbase += *prop; + port->mapbase += be32_to_cpup(prop); /* Check for registers offset within the devices address range */ prop = of_get_property(np, "reg-shift", &prop_size); if (prop && (prop_size == sizeof(u32))) - port->regshift = *prop; + port->regshift = be32_to_cpup(prop); port->irq = irq_of_parse_and_map(np, 0); port->iotype = UPIO_MEM; port->type = type; - port->uartclk = *clk; + port->uartclk = be32_to_cpup(clk); port->flags = UPF_SHARE_IRQ | UPF_BOOT_AUTOCONF | UPF_IOREMAP | UPF_FIXED_PORT | UPF_FIXED_TYPE; port->dev = &ofdev->dev; /* If current-speed was set, then try not to change it. */ if (spd) - port->custom_divisor = *clk / (16 * (*spd)); + port->custom_divisor = be32_to_cpup(clk) / (16 * (be32_to_cpup(spd))); return 0; } -- cgit v1.2.3-70-g09d2