From c01f0f1a4a96eb3acc5850e18cc43f24366966d0 Mon Sep 17 00:00:00 2001 From: Yoshihiro Shimoda Date: Fri, 21 Aug 2009 16:30:28 +0900 Subject: sh: Add initial support for SH7757 CPU subtype Signed-off-by: Yoshihiro Shimoda Signed-off-by: Paul Mundt --- drivers/serial/sh-sci.h | 17 +++++++++++++++++ 1 file changed, 17 insertions(+) (limited to 'drivers/serial/sh-sci.h') diff --git a/drivers/serial/sh-sci.h b/drivers/serial/sh-sci.h index 38072c15b84..3e2fcf93b42 100644 --- a/drivers/serial/sh-sci.h +++ b/drivers/serial/sh-sci.h @@ -112,6 +112,13 @@ #elif defined(CONFIG_H8S2678) # define SCSCR_INIT(port) 0x30 /* TIE=0,RIE=0,TE=1,RE=1 */ # define H8300_SCI_DR(ch) *(volatile char *)(P1DR + h8300_sci_pins[ch].port) +#elif defined(CONFIG_CPU_SUBTYPE_SH7757) +# define SCSPTR0 0xfe4b0020 +# define SCSPTR1 0xfe4b0020 +# define SCSPTR2 0xfe4b0020 +# define SCIF_ORER 0x0001 +# define SCSCR_INIT(port) 0x38 +# define SCIF_ONLY #elif defined(CONFIG_CPU_SUBTYPE_SH7763) # define SCSPTR0 0xffe00024 /* 16 bit SCIF */ # define SCSPTR1 0xffe08024 /* 16 bit SCIF */ @@ -562,6 +569,16 @@ static inline int sci_rxd_in(struct uart_port *port) return ctrl_inw(SCSPTR2)&0x0001 ? 1 : 0; /* SCIF */ return 1; } +#elif defined(CONFIG_CPU_SUBTYPE_SH7757) +static inline int sci_rxd_in(struct uart_port *port) +{ + if (port->mapbase == 0xfe4b0000) + return ctrl_inw(SCSPTR0) & 0x0001 ? 1 : 0; + if (port->mapbase == 0xfe4c0000) + return ctrl_inw(SCSPTR1) & 0x0001 ? 1 : 0; + if (port->mapbase == 0xfe4d0000) + return ctrl_inw(SCSPTR2) & 0x0001 ? 1 : 0; +} #elif defined(CONFIG_CPU_SUBTYPE_SH7760) static inline int sci_rxd_in(struct uart_port *port) { -- cgit v1.2.3-70-g09d2